diff options
Diffstat (limited to 'include/linux/regulator')
| -rw-r--r-- | include/linux/regulator/arizona-ldo1.h | 24 | ||||
| -rw-r--r-- | include/linux/regulator/arizona-micsupp.h | 21 | ||||
| -rw-r--r-- | include/linux/regulator/consumer.h | 1 | ||||
| -rw-r--r-- | include/linux/regulator/driver.h | 18 | ||||
| -rw-r--r-- | include/linux/regulator/machine.h | 5 | ||||
| -rw-r--r-- | include/linux/regulator/pfuze100.h | 1 |
6 files changed, 69 insertions, 1 deletions
diff --git a/include/linux/regulator/arizona-ldo1.h b/include/linux/regulator/arizona-ldo1.h new file mode 100644 index 000000000000..c685f1277c63 --- /dev/null +++ b/include/linux/regulator/arizona-ldo1.h @@ -0,0 +1,24 @@ +/* + * Platform data for Arizona LDO1 regulator + * + * Copyright 2017 Cirrus Logic + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef ARIZONA_LDO1_H +#define ARIZONA_LDO1_H + +struct regulator_init_data; + +struct arizona_ldo1_pdata { + /** GPIO controlling LDOENA, if any */ + int ldoena; + + /** Regulator configuration for LDO1 */ + const struct regulator_init_data *init_data; +}; + +#endif diff --git a/include/linux/regulator/arizona-micsupp.h b/include/linux/regulator/arizona-micsupp.h new file mode 100644 index 000000000000..616842619c00 --- /dev/null +++ b/include/linux/regulator/arizona-micsupp.h @@ -0,0 +1,21 @@ +/* + * Platform data for Arizona micsupp regulator + * + * Copyright 2017 Cirrus Logic + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef ARIZONA_MICSUPP_H +#define ARIZONA_MICSUPP_H + +struct regulator_init_data; + +struct arizona_micsupp_pdata { + /** Regulator configuration for micsupp */ + const struct regulator_init_data *init_data; +}; + +#endif diff --git a/include/linux/regulator/consumer.h b/include/linux/regulator/consumer.h index ea0fffa5faeb..df176d7c2b87 100644 --- a/include/linux/regulator/consumer.h +++ b/include/linux/regulator/consumer.h @@ -119,6 +119,7 @@ struct regmap; #define REGULATOR_EVENT_ABORT_VOLTAGE_CHANGE 0x200 #define REGULATOR_EVENT_PRE_DISABLE 0x400 #define REGULATOR_EVENT_ABORT_DISABLE 0x800 +#define REGULATOR_EVENT_ENABLE 0x1000 /* * Regulator errors that can be queried using regulator_get_error_flags diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h index dac8e7b16bc6..94417b4226bd 100644 --- a/include/linux/regulator/driver.h +++ b/include/linux/regulator/driver.h @@ -292,6 +292,14 @@ enum regulator_type { * set_active_discharge * @active_discharge_reg: Register for control when using regmap * set_active_discharge + * @soft_start_reg: Register for control when using regmap set_soft_start + * @soft_start_mask: Mask for control when using regmap set_soft_start + * @soft_start_val_on: Enabling value for control when using regmap + * set_soft_start + * @pull_down_reg: Register for control when using regmap set_pull_down + * @pull_down_mask: Mask for control when using regmap set_pull_down + * @pull_down_val_on: Enabling value for control when using regmap + * set_pull_down * * @enable_time: Time taken for initial enable of regulator (in uS). * @off_on_delay: guard time (in uS), before re-enabling a regulator @@ -345,6 +353,12 @@ struct regulator_desc { unsigned int active_discharge_off; unsigned int active_discharge_mask; unsigned int active_discharge_reg; + unsigned int soft_start_reg; + unsigned int soft_start_mask; + unsigned int soft_start_val_on; + unsigned int pull_down_reg; + unsigned int pull_down_mask; + unsigned int pull_down_val_on; unsigned int enable_time; @@ -429,6 +443,8 @@ struct regulator_dev { struct regulator_enable_gpio *ena_pin; unsigned int ena_gpio_state:1; + unsigned int is_switch:1; + /* time when this regulator was disabled last time */ unsigned long last_off_jiffy; }; @@ -476,6 +492,8 @@ int regulator_set_voltage_time_sel(struct regulator_dev *rdev, unsigned int new_selector); int regulator_set_bypass_regmap(struct regulator_dev *rdev, bool enable); int regulator_get_bypass_regmap(struct regulator_dev *rdev, bool *enable); +int regulator_set_soft_start_regmap(struct regulator_dev *rdev); +int regulator_set_pull_down_regmap(struct regulator_dev *rdev); int regulator_set_active_discharge_regmap(struct regulator_dev *rdev, bool enable); diff --git a/include/linux/regulator/machine.h b/include/linux/regulator/machine.h index ad3e5158e586..117699d1f7df 100644 --- a/include/linux/regulator/machine.h +++ b/include/linux/regulator/machine.h @@ -65,7 +65,7 @@ struct regulator_state { int uV; /* suspend voltage */ unsigned int mode; /* suspend regulator operating mode */ int enabled; /* is regulator enabled in this suspend state */ - int disabled; /* is the regulator disbled in this suspend state */ + int disabled; /* is the regulator disabled in this suspend state */ }; /** @@ -108,6 +108,8 @@ struct regulator_state { * @initial_state: Suspend state to set by default. * @initial_mode: Mode to set at startup. * @ramp_delay: Time to settle down after voltage change (unit: uV/us) + * @settling_time: Time to settle down after voltage change when voltage + * change is non-linear (unit: microseconds). * @active_discharge: Enable/disable active discharge. The enum * regulator_active_discharge values are used for * initialisation. @@ -149,6 +151,7 @@ struct regulation_constraints { unsigned int initial_mode; unsigned int ramp_delay; + unsigned int settling_time; unsigned int enable_time; unsigned int active_discharge; diff --git a/include/linux/regulator/pfuze100.h b/include/linux/regulator/pfuze100.h index 70c6c66c5bcf..e0ccf46f66cf 100644 --- a/include/linux/regulator/pfuze100.h +++ b/include/linux/regulator/pfuze100.h @@ -48,6 +48,7 @@ #define PFUZE200_VGEN4 10 #define PFUZE200_VGEN5 11 #define PFUZE200_VGEN6 12 +#define PFUZE200_COIN 13 #define PFUZE3000_SW1A 0 #define PFUZE3000_SW1B 1 |