diff options
Diffstat (limited to 'include/linux/platform_data')
102 files changed, 4570 insertions, 1 deletions
diff --git a/include/linux/platform_data/ad5755.h b/include/linux/platform_data/ad5755.h new file mode 100644 index 000000000000..a5a1cb751874 --- /dev/null +++ b/include/linux/platform_data/ad5755.h @@ -0,0 +1,103 @@ +/* + * Copyright 2012 Analog Devices Inc. + * + * Licensed under the GPL-2. + */ +#ifndef __LINUX_PLATFORM_DATA_AD5755_H__ +#define __LINUX_PLATFORM_DATA_AD5755_H__ + +enum ad5755_mode { + AD5755_MODE_VOLTAGE_0V_5V = 0, + AD5755_MODE_VOLTAGE_0V_10V = 1, + AD5755_MODE_VOLTAGE_PLUSMINUS_5V = 2, + AD5755_MODE_VOLTAGE_PLUSMINUS_10V = 3, + AD5755_MODE_CURRENT_4mA_20mA = 4, + AD5755_MODE_CURRENT_0mA_20mA = 5, + AD5755_MODE_CURRENT_0mA_24mA = 6, +}; + +enum ad5755_dc_dc_phase { + AD5755_DC_DC_PHASE_ALL_SAME_EDGE = 0, + AD5755_DC_DC_PHASE_A_B_SAME_EDGE_C_D_OPP_EDGE = 1, + AD5755_DC_DC_PHASE_A_C_SAME_EDGE_B_D_OPP_EDGE = 2, + AD5755_DC_DC_PHASE_90_DEGREE = 3, +}; + +enum ad5755_dc_dc_freq { + AD5755_DC_DC_FREQ_250kHZ = 0, + AD5755_DC_DC_FREQ_410kHZ = 1, + AD5755_DC_DC_FREQ_650kHZ = 2, +}; + +enum ad5755_dc_dc_maxv { + AD5755_DC_DC_MAXV_23V = 0, + AD5755_DC_DC_MAXV_24V5 = 1, + AD5755_DC_DC_MAXV_27V = 2, + AD5755_DC_DC_MAXV_29V5 = 3, +}; + +enum ad5755_slew_rate { + AD5755_SLEW_RATE_64k = 0, + AD5755_SLEW_RATE_32k = 1, + AD5755_SLEW_RATE_16k = 2, + AD5755_SLEW_RATE_8k = 3, + AD5755_SLEW_RATE_4k = 4, + AD5755_SLEW_RATE_2k = 5, + AD5755_SLEW_RATE_1k = 6, + AD5755_SLEW_RATE_500 = 7, + AD5755_SLEW_RATE_250 = 8, + AD5755_SLEW_RATE_125 = 9, + AD5755_SLEW_RATE_64 = 10, + AD5755_SLEW_RATE_32 = 11, + AD5755_SLEW_RATE_16 = 12, + AD5755_SLEW_RATE_8 = 13, + AD5755_SLEW_RATE_4 = 14, + AD5755_SLEW_RATE_0_5 = 15, +}; + +enum ad5755_slew_step_size { + AD5755_SLEW_STEP_SIZE_1 = 0, + AD5755_SLEW_STEP_SIZE_2 = 1, + AD5755_SLEW_STEP_SIZE_4 = 2, + AD5755_SLEW_STEP_SIZE_8 = 3, + AD5755_SLEW_STEP_SIZE_16 = 4, + AD5755_SLEW_STEP_SIZE_32 = 5, + AD5755_SLEW_STEP_SIZE_64 = 6, + AD5755_SLEW_STEP_SIZE_128 = 7, + AD5755_SLEW_STEP_SIZE_256 = 8, +}; + +/** + * struct ad5755_platform_data - AD5755 DAC driver platform data + * @ext_dc_dc_compenstation_resistor: Whether an external DC-DC converter + * compensation register is used. + * @dc_dc_phase: DC-DC converter phase. + * @dc_dc_freq: DC-DC converter frequency. + * @dc_dc_maxv: DC-DC maximum allowed boost voltage. + * @dac.mode: The mode to be used for the DAC output. + * @dac.ext_current_sense_resistor: Whether an external current sense resistor + * is used. + * @dac.enable_voltage_overrange: Whether to enable 20% voltage output overrange. + * @dac.slew.enable: Whether to enable digital slew. + * @dac.slew.rate: Slew rate of the digital slew. + * @dac.slew.step_size: Slew step size of the digital slew. + **/ +struct ad5755_platform_data { + bool ext_dc_dc_compenstation_resistor; + enum ad5755_dc_dc_phase dc_dc_phase; + enum ad5755_dc_dc_freq dc_dc_freq; + enum ad5755_dc_dc_maxv dc_dc_maxv; + + struct { + enum ad5755_mode mode; + bool ext_current_sense_resistor; + bool enable_voltage_overrange; + struct { + bool enable; + enum ad5755_slew_rate rate; + enum ad5755_slew_step_size step_size; + } slew; + } dac[4]; +}; + +#endif diff --git a/include/linux/platform_data/ad7791.h b/include/linux/platform_data/ad7791.h new file mode 100644 index 000000000000..f9e4db1b82ae --- /dev/null +++ b/include/linux/platform_data/ad7791.h @@ -0,0 +1,17 @@ +#ifndef __LINUX_PLATFORM_DATA_AD7791__ +#define __LINUX_PLATFORM_DATA_AD7791__ + +/** + * struct ad7791_platform_data - AD7791 device platform data + * @buffered: If set to true configure the device for buffered input mode. + * @burnout_current: If set to true the 100mA burnout current is enabled. + * @unipolar: If set to true sample in unipolar mode, if set to false sample in + * bipolar mode. + */ +struct ad7791_platform_data { + bool buffered; + bool burnout_current; + bool unipolar; +}; + +#endif diff --git a/include/linux/platform_data/asoc-imx-ssi.h b/include/linux/platform_data/asoc-imx-ssi.h new file mode 100644 index 000000000000..63f3c2804239 --- /dev/null +++ b/include/linux/platform_data/asoc-imx-ssi.h @@ -0,0 +1,21 @@ +#ifndef __MACH_SSI_H +#define __MACH_SSI_H + +struct snd_ac97; + +extern unsigned char imx_ssi_fiq_start, imx_ssi_fiq_end; +extern unsigned long imx_ssi_fiq_base, imx_ssi_fiq_tx_buffer, imx_ssi_fiq_rx_buffer; + +struct imx_ssi_platform_data { + unsigned int flags; +#define IMX_SSI_DMA (1 << 0) +#define IMX_SSI_USE_AC97 (1 << 1) +#define IMX_SSI_NET (1 << 2) +#define IMX_SSI_SYN (1 << 3) +#define IMX_SSI_USE_I2S_SLAVE (1 << 4) + void (*ac97_reset) (struct snd_ac97 *ac97); + void (*ac97_warm_reset)(struct snd_ac97 *ac97); +}; + +#endif /* __MACH_SSI_H */ + diff --git a/include/linux/platform_data/asoc-kirkwood.h b/include/linux/platform_data/asoc-kirkwood.h new file mode 100644 index 000000000000..d6a55bd2e578 --- /dev/null +++ b/include/linux/platform_data/asoc-kirkwood.h @@ -0,0 +1,7 @@ +#ifndef __PLAT_AUDIO_H +#define __PLAT_AUDIO_H + +struct kirkwood_asoc_platform_data { + int burst; +}; +#endif diff --git a/include/linux/platform_data/asoc-palm27x.h b/include/linux/platform_data/asoc-palm27x.h new file mode 100644 index 000000000000..58afb30d5298 --- /dev/null +++ b/include/linux/platform_data/asoc-palm27x.h @@ -0,0 +1,8 @@ +#ifndef _INCLUDE_PALMASOC_H_ +#define _INCLUDE_PALMASOC_H_ + +struct palm27x_asoc_info { + int jack_gpio; +}; + +#endif diff --git a/include/linux/platform_data/asoc-s3c.h b/include/linux/platform_data/asoc-s3c.h new file mode 100644 index 000000000000..aa9875f77c40 --- /dev/null +++ b/include/linux/platform_data/asoc-s3c.h @@ -0,0 +1,59 @@ +/* arch/arm/plat-samsung/include/plat/audio.h + * + * Copyright (c) 2009 Samsung Electronics Co. Ltd + * Author: Jaswinder Singh <jassi.brar@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* The machine init code calls s3c*_ac97_setup_gpio with + * one of these defines in order to select appropriate bank + * of GPIO for AC97 pins + */ +#define S3C64XX_AC97_GPD 0 +#define S3C64XX_AC97_GPE 1 +extern void s3c64xx_ac97_setup_gpio(int); + +/* + * The machine init code calls s5p*_spdif_setup_gpio with + * one of these defines in order to select appropriate bank + * of GPIO for S/PDIF pins + */ +#define S5PC100_SPDIF_GPD 0 +#define S5PC100_SPDIF_GPG3 1 +extern void s5pc100_spdif_setup_gpio(int); + +struct samsung_i2s { +/* If the Primary DAI has 5.1 Channels */ +#define QUIRK_PRI_6CHAN (1 << 0) +/* If the I2S block has a Stereo Overlay Channel */ +#define QUIRK_SEC_DAI (1 << 1) +/* + * If the I2S block has no internal prescalar or MUX (I2SMOD[10] bit) + * The Machine driver must provide suitably set clock to the I2S block. + */ +#define QUIRK_NO_MUXPSR (1 << 2) +#define QUIRK_NEED_RSTCLR (1 << 3) + /* Quirks of the I2S controller */ + u32 quirks; + + /* + * Array of clock names that can be used to generate I2S signals. + * Also corresponds to clocks of I2SMOD[10] + */ + const char **src_clk; + dma_addr_t idma_addr; +}; + +/** + * struct s3c_audio_pdata - common platform data for audio device drivers + * @cfg_gpio: Callback function to setup mux'ed pins in I2S/PCM/AC97 mode + */ +struct s3c_audio_pdata { + int (*cfg_gpio)(struct platform_device *); + union { + struct samsung_i2s i2s; + } type; +}; diff --git a/include/linux/platform_data/asoc-s3c24xx_simtec.h b/include/linux/platform_data/asoc-s3c24xx_simtec.h new file mode 100644 index 000000000000..376af5286a3e --- /dev/null +++ b/include/linux/platform_data/asoc-s3c24xx_simtec.h @@ -0,0 +1,34 @@ +/* arch/arm/plat-samsung/include/plat/audio-simtec.h + * + * Copyright 2008 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks <ben@simtec.co.uk> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Simtec Audio support. +*/ + +/** + * struct s3c24xx_audio_simtec_pdata - platform data for simtec audio + * @use_mpllin: Select codec clock from MPLLin + * @output_cdclk: Need to output CDCLK to the codec + * @have_mic: Set if we have a MIC socket + * @have_lout: Set if we have a LineOut socket + * @amp_gpio: GPIO pin to enable the AMP + * @amp_gain: Option GPIO to control AMP gain + */ +struct s3c24xx_audio_simtec_pdata { + unsigned int use_mpllin:1; + unsigned int output_cdclk:1; + + unsigned int have_mic:1; + unsigned int have_lout:1; + + int amp_gpio; + int amp_gain[2]; + + void (*startup)(void); +}; diff --git a/include/linux/platform_data/asoc-ti-mcbsp.h b/include/linux/platform_data/asoc-ti-mcbsp.h new file mode 100644 index 000000000000..18814127809a --- /dev/null +++ b/include/linux/platform_data/asoc-ti-mcbsp.h @@ -0,0 +1,62 @@ +/* + * arch/arm/plat-omap/include/mach/mcbsp.h + * + * Defines for Multi-Channel Buffered Serial Port + * + * Copyright (C) 2002 RidgeRun, Inc. + * Author: Steve Johnson + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ +#ifndef __ASM_ARCH_OMAP_MCBSP_H +#define __ASM_ARCH_OMAP_MCBSP_H + +#include <linux/spinlock.h> +#include <linux/clk.h> + +#define MCBSP_CONFIG_TYPE2 0x2 +#define MCBSP_CONFIG_TYPE3 0x3 +#define MCBSP_CONFIG_TYPE4 0x4 + +/* Platform specific configuration */ +struct omap_mcbsp_ops { + void (*request)(unsigned int); + void (*free)(unsigned int); +}; + +struct omap_mcbsp_platform_data { + struct omap_mcbsp_ops *ops; + u16 buffer_size; + u8 reg_size; + u8 reg_step; + + /* McBSP platform and instance specific features */ + bool has_wakeup; /* Wakeup capability */ + bool has_ccr; /* Transceiver has configuration control registers */ + int (*enable_st_clock)(unsigned int, bool); + int (*set_clk_src)(struct device *dev, struct clk *clk, const char *src); + int (*mux_signal)(struct device *dev, const char *signal, const char *src); +}; + +/** + * omap_mcbsp_dev_attr - OMAP McBSP device attributes for omap_hwmod + * @sidetone: name of the sidetone device + */ +struct omap_mcbsp_dev_attr { + const char *sidetone; +}; + +#endif diff --git a/include/linux/platform_data/ata-pxa.h b/include/linux/platform_data/ata-pxa.h new file mode 100644 index 000000000000..6cf7df1d5830 --- /dev/null +++ b/include/linux/platform_data/ata-pxa.h @@ -0,0 +1,33 @@ +/* + * Generic PXA PATA driver + * + * Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. If not, write to + * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __MACH_PATA_PXA_H__ +#define __MACH_PATA_PXA_H__ + +struct pata_pxa_pdata { + /* PXA DMA DREQ<0:2> pin */ + uint32_t dma_dreq; + /* Register shift */ + uint32_t reg_shift; + /* IRQ flags */ + uint32_t irq_flags; +}; + +#endif /* __MACH_PATA_PXA_H__ */ diff --git a/include/linux/platform_data/ata-samsung_cf.h b/include/linux/platform_data/ata-samsung_cf.h new file mode 100644 index 000000000000..2a3855a8372a --- /dev/null +++ b/include/linux/platform_data/ata-samsung_cf.h @@ -0,0 +1,36 @@ +/* linux/arch/arm/plat-samsung/include/plat/ata.h + * + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Samsung CF-ATA platform_device info + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_PLAT_ATA_H +#define __ASM_PLAT_ATA_H __FILE__ + +/** + * struct s3c_ide_platdata - S3C IDE driver platform data. + * @setup_gpio: Setup the external GPIO pins to the right state for data + * transfer in true-ide mode. + */ +struct s3c_ide_platdata { + void (*setup_gpio)(void); +}; + +/* + * s3c_ide_set_platdata() - Setup the platform specifc data for IDE driver. + * @pdata: Platform data for IDE driver. + */ +extern void s3c_ide_set_platdata(struct s3c_ide_platdata *pdata); + +/* architecture-specific IDE configuration */ +extern void s3c64xx_ide_setup_gpio(void); +extern void s5pc100_ide_setup_gpio(void); +extern void s5pv210_ide_setup_gpio(void); + +#endif /*__ASM_PLAT_ATA_H */ diff --git a/include/linux/platform_data/atmel-aes.h b/include/linux/platform_data/atmel-aes.h index e7a1949bad26..ab68082fbcb0 100644 --- a/include/linux/platform_data/atmel-aes.h +++ b/include/linux/platform_data/atmel-aes.h @@ -1,7 +1,7 @@ #ifndef __LINUX_ATMEL_AES_H #define __LINUX_ATMEL_AES_H -#include <mach/at_hdmac.h> +#include <linux/platform_data/dma-atmel.h> /** * struct aes_dma_data - DMA data for AES diff --git a/include/linux/platform_data/camera-mx1.h b/include/linux/platform_data/camera-mx1.h new file mode 100644 index 000000000000..4fd6c70314b4 --- /dev/null +++ b/include/linux/platform_data/camera-mx1.h @@ -0,0 +1,35 @@ +/* + * mx1_camera.h - i.MX1/i.MXL camera driver header file + * + * Copyright (c) 2008, Paulius Zaleckas <paulius.zaleckas@teltonika.lt> + * Copyright (C) 2009, Darius Augulis <augulis.darius@gmail.com> + * + * Based on PXA camera.h file: + * Copyright (C) 2003, Intel Corporation + * Copyright (C) 2008, Guennadi Liakhovetski <kernel@pengutronix.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_ARCH_CAMERA_H_ +#define __ASM_ARCH_CAMERA_H_ + +#define MX1_CAMERA_DATA_HIGH 1 +#define MX1_CAMERA_PCLK_RISING 2 +#define MX1_CAMERA_VSYNC_HIGH 4 + +extern unsigned char mx1_camera_sof_fiq_start, mx1_camera_sof_fiq_end; + +/** + * struct mx1_camera_pdata - i.MX1/i.MXL camera platform data + * @mclk_10khz: master clock frequency in 10kHz units + * @flags: MX1 camera platform flags + */ +struct mx1_camera_pdata { + unsigned long mclk_10khz; + unsigned long flags; +}; + +#endif /* __ASM_ARCH_CAMERA_H_ */ diff --git a/include/linux/platform_data/camera-mx2.h b/include/linux/platform_data/camera-mx2.h new file mode 100644 index 000000000000..7ded6f1f74bc --- /dev/null +++ b/include/linux/platform_data/camera-mx2.h @@ -0,0 +1,44 @@ +/* + * mx2-cam.h - i.MX27/i.MX25 camera driver header file + * + * Copyright (C) 2003, Intel Corporation + * Copyright (C) 2008, Sascha Hauer <s.hauer@pengutronix.de> + * Copyright (C) 2010, Baruch Siach <baruch@tkos.co.il> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + */ + +#ifndef __MACH_MX2_CAM_H_ +#define __MACH_MX2_CAM_H_ + +#define MX2_CAMERA_EXT_VSYNC (1 << 1) +#define MX2_CAMERA_CCIR (1 << 2) +#define MX2_CAMERA_CCIR_INTERLACE (1 << 3) +#define MX2_CAMERA_HSYNC_HIGH (1 << 4) +#define MX2_CAMERA_GATED_CLOCK (1 << 5) +#define MX2_CAMERA_INV_DATA (1 << 6) +#define MX2_CAMERA_PCLK_SAMPLE_RISING (1 << 7) + +/** + * struct mx2_camera_platform_data - optional platform data for mx2_camera + * @flags: any combination of MX2_CAMERA_* + * @clk: clock rate of the csi block / 2 + */ +struct mx2_camera_platform_data { + unsigned long flags; + unsigned long clk; +}; + +#endif /* __MACH_MX2_CAM_H_ */ diff --git a/include/linux/platform_data/camera-mx3.h b/include/linux/platform_data/camera-mx3.h new file mode 100644 index 000000000000..f226ee3777e1 --- /dev/null +++ b/include/linux/platform_data/camera-mx3.h @@ -0,0 +1,48 @@ +/* + * mx3_camera.h - i.MX3x camera driver header file + * + * Copyright (C) 2008, Guennadi Liakhovetski, DENX Software Engineering, <lg@denx.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef _MX3_CAMERA_H_ +#define _MX3_CAMERA_H_ + +#include <linux/device.h> + +#define MX3_CAMERA_CLK_SRC 1 +#define MX3_CAMERA_EXT_VSYNC 2 +#define MX3_CAMERA_DP 4 +#define MX3_CAMERA_PCP 8 +#define MX3_CAMERA_HSP 0x10 +#define MX3_CAMERA_VSP 0x20 +#define MX3_CAMERA_DATAWIDTH_4 0x40 +#define MX3_CAMERA_DATAWIDTH_8 0x80 +#define MX3_CAMERA_DATAWIDTH_10 0x100 +#define MX3_CAMERA_DATAWIDTH_15 0x200 + +#define MX3_CAMERA_DATAWIDTH_MASK (MX3_CAMERA_DATAWIDTH_4 | MX3_CAMERA_DATAWIDTH_8 | \ + MX3_CAMERA_DATAWIDTH_10 | MX3_CAMERA_DATAWIDTH_15) + +/** + * struct mx3_camera_pdata - i.MX3x camera platform data + * @flags: MX3_CAMERA_* flags + * @mclk_10khz: master clock frequency in 10kHz units + * @dma_dev: IPU DMA device to match against in channel allocation + */ +struct mx3_camera_pdata { + unsigned long flags; + unsigned long mclk_10khz; + struct device *dma_dev; +}; + +#endif diff --git a/include/linux/platform_data/camera-pxa.h b/include/linux/platform_data/camera-pxa.h new file mode 100644 index 000000000000..6709b1cd7c77 --- /dev/null +++ b/include/linux/platform_data/camera-pxa.h @@ -0,0 +1,44 @@ +/* + camera.h - PXA camera driver header file + + Copyright (C) 2003, Intel Corporation + Copyright (C) 2008, Guennadi Liakhovetski <kernel@pengutronix.de> + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#ifndef __ASM_ARCH_CAMERA_H_ +#define __ASM_ARCH_CAMERA_H_ + +#define PXA_CAMERA_MASTER 1 +#define PXA_CAMERA_DATAWIDTH_4 2 +#define PXA_CAMERA_DATAWIDTH_5 4 +#define PXA_CAMERA_DATAWIDTH_8 8 +#define PXA_CAMERA_DATAWIDTH_9 0x10 +#define PXA_CAMERA_DATAWIDTH_10 0x20 +#define PXA_CAMERA_PCLK_EN 0x40 +#define PXA_CAMERA_MCLK_EN 0x80 +#define PXA_CAMERA_PCP 0x100 +#define PXA_CAMERA_HSP 0x200 +#define PXA_CAMERA_VSP 0x400 + +struct pxacamera_platform_data { + unsigned long flags; + unsigned long mclk_10khz; +}; + +extern void pxa_set_camera_info(struct pxacamera_platform_data *); + +#endif /* __ASM_ARCH_CAMERA_H_ */ diff --git a/include/linux/platform_data/clk-realview.h b/include/linux/platform_data/clk-realview.h new file mode 100644 index 000000000000..2e426a7dbc51 --- /dev/null +++ b/include/linux/platform_data/clk-realview.h @@ -0,0 +1 @@ +void realview_clk_init(void __iomem *sysbase, bool is_pb1176); diff --git a/include/linux/platform_data/clk-ux500.h b/include/linux/platform_data/clk-ux500.h new file mode 100644 index 000000000000..3af0da1f3be5 --- /dev/null +++ b/include/linux/platform_data/clk-ux500.h @@ -0,0 +1,17 @@ +/* + * Clock definitions for ux500 platforms + * + * Copyright (C) 2012 ST-Ericsson SA + * Author: Ulf Hansson <ulf.hansson@linaro.org> + * + * License terms: GNU General Public License (GPL) version 2 + */ + +#ifndef __CLK_UX500_H +#define __CLK_UX500_H + +void u8500_clk_init(void); +void u9540_clk_init(void); +void u8540_clk_init(void); + +#endif /* __CLK_UX500_H */ diff --git a/include/linux/platform_data/crypto-ux500.h b/include/linux/platform_data/crypto-ux500.h new file mode 100644 index 000000000000..5b2d0817e26a --- /dev/null +++ b/include/linux/platform_data/crypto-ux500.h @@ -0,0 +1,22 @@ +/* + * Copyright (C) ST-Ericsson SA 2011 + * + * Author: Joakim Bech <joakim.xx.bech@stericsson.com> for ST-Ericsson + * License terms: GNU General Public License (GPL) version 2 + */ +#ifndef _CRYPTO_UX500_H +#define _CRYPTO_UX500_H +#include <linux/dmaengine.h> +#include <plat/ste_dma40.h> + +struct hash_platform_data { + void *mem_to_engine; + bool (*dma_filter)(struct dma_chan *chan, void *filter_param); +}; + +struct cryp_platform_data { + struct stedma40_chan_cfg mem_to_engine; + struct stedma40_chan_cfg engine_to_mem; +}; + +#endif diff --git a/include/linux/platform_data/dma-atmel.h b/include/linux/platform_data/dma-atmel.h new file mode 100644 index 000000000000..cab0997be3de --- /dev/null +++ b/include/linux/platform_data/dma-atmel.h @@ -0,0 +1,61 @@ +/* + * Header file for the Atmel AHB DMA Controller driver + * + * Copyright (C) 2008 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ +#ifndef AT_HDMAC_H +#define AT_HDMAC_H + +#include <linux/dmaengine.h> + +/** + * struct at_dma_platform_data - Controller configuration parameters + * @nr_channels: Number of channels supported by hardware (max 8) + * @cap_mask: dma_capability flags supported by the platform + */ +struct at_dma_platform_data { + unsigned int nr_channels; + dma_cap_mask_t cap_mask; +}; + +/** + * struct at_dma_slave - Controller-specific information about a slave + * @dma_dev: required DMA master device + * @cfg: Platform-specific initializer for the CFG register + */ +struct at_dma_slave { + struct device *dma_dev; + u32 cfg; +}; + + +/* Platform-configurable bits in CFG */ +#define ATC_SRC_PER(h) (0xFU & (h)) /* Channel src rq associated with periph handshaking ifc h */ +#define ATC_DST_PER(h) ((0xFU & (h)) << 4) /* Channel dst rq associated with periph handshaking ifc h */ +#define ATC_SRC_REP (0x1 << 8) /* Source Replay Mod */ +#define ATC_SRC_H2SEL (0x1 << 9) /* Source Handshaking Mod */ +#define ATC_SRC_H2SEL_SW (0x0 << 9) +#define ATC_SRC_H2SEL_HW (0x1 << 9) +#define ATC_DST_REP (0x1 << 12) /* Destination Replay Mod */ +#define ATC_DST_H2SEL (0x1 << 13) /* Destination Handshaking Mod */ +#define ATC_DST_H2SEL_SW (0x0 << 13) +#define ATC_DST_H2SEL_HW (0x1 << 13) +#define ATC_SOD (0x1 << 16) /* Stop On Done */ +#define ATC_LOCK_IF (0x1 << 20) /* Interface Lock */ +#define ATC_LOCK_B (0x1 << 21) /* AHB Bus Lock */ +#define ATC_LOCK_IF_L (0x1 << 22) /* Master Interface Arbiter Lock */ +#define ATC_LOCK_IF_L_CHUNK (0x0 << 22) +#define ATC_LOCK_IF_L_BUFFER (0x1 << 22) +#define ATC_AHB_PROT_MASK (0x7 << 24) /* AHB Protection */ +#define ATC_FIFOCFG_MASK (0x3 << 28) /* FIFO Request Configuration */ +#define ATC_FIFOCFG_LARGESTBURST (0x0 << 28) +#define ATC_FIFOCFG_HALFFIFO (0x1 << 28) +#define ATC_FIFOCFG_ENOUGHSPACE (0x2 << 28) + + +#endif /* AT_HDMAC_H */ diff --git a/include/linux/platform_data/dma-ep93xx.h b/include/linux/platform_data/dma-ep93xx.h new file mode 100644 index 000000000000..e82c642fa53c --- /dev/null +++ b/include/linux/platform_data/dma-ep93xx.h @@ -0,0 +1,93 @@ +#ifndef __ASM_ARCH_DMA_H +#define __ASM_ARCH_DMA_H + +#include <linux/types.h> +#include <linux/dmaengine.h> +#include <linux/dma-mapping.h> + +/* + * M2P channels. + * + * Note that these values are also directly used for setting the PPALLOC + * register. + */ +#define EP93XX_DMA_I2S1 0 +#define EP93XX_DMA_I2S2 1 +#define EP93XX_DMA_AAC1 2 +#define EP93XX_DMA_AAC2 3 +#define EP93XX_DMA_AAC3 4 +#define EP93XX_DMA_I2S3 5 +#define EP93XX_DMA_UART1 6 +#define EP93XX_DMA_UART2 7 +#define EP93XX_DMA_UART3 8 +#define EP93XX_DMA_IRDA 9 +/* M2M channels */ +#define EP93XX_DMA_SSP 10 +#define EP93XX_DMA_IDE 11 + +/** + * struct ep93xx_dma_data - configuration data for the EP93xx dmaengine + * @port: peripheral which is requesting the channel + * @direction: TX/RX channel + * @name: optional name for the channel, this is displayed in /proc/interrupts + * + * This information is passed as private channel parameter in a filter + * function. Note that this is only needed for slave/cyclic channels. For + * memcpy channels %NULL data should be passed. + */ +struct ep93xx_dma_data { + int port; + enum dma_transfer_direction direction; + const char *name; +}; + +/** + * struct ep93xx_dma_chan_data - platform specific data for a DMA channel + * @name: name of the channel, used for getting the right clock for the channel + * @base: mapped registers + * @irq: interrupt number used by this channel + */ +struct ep93xx_dma_chan_data { + const char *name; + void __iomem *base; + int irq; +}; + +/** + * struct ep93xx_dma_platform_data - platform data for the dmaengine driver + * @channels: array of channels which are passed to the driver + * @num_channels: number of channels in the array + * + * This structure is passed to the DMA engine driver via platform data. For + * M2P channels, contract is that even channels are for TX and odd for RX. + * There is no requirement for the M2M channels. + */ +struct ep93xx_dma_platform_data { + struct ep93xx_dma_chan_data *channels; + size_t num_channels; +}; + +static inline bool ep93xx_dma_chan_is_m2p(struct dma_chan *chan) +{ + return !strcmp(dev_name(chan->device->dev), "ep93xx-dma-m2p"); +} + +/** + * ep93xx_dma_chan_direction - returns direction the channel can be used + * @chan: channel + * + * This function can be used in filter functions to find out whether the + * channel supports given DMA direction. Only M2P channels have such + * limitation, for M2M channels the direction is configurable. + */ +static inline enum dma_transfer_direction +ep93xx_dma_chan_direction(struct dma_chan *chan) +{ + if (!ep93xx_dma_chan_is_m2p(chan)) + return DMA_NONE; + + /* even channels are for TX, odd for RX */ + return (chan->chan_id % 2 == 0) ? DMA_MEM_TO_DEV : DMA_DEV_TO_MEM; +} + +#endif /* __ASM_ARCH_DMA_H */ diff --git a/include/linux/platform_data/dma-imx-sdma.h b/include/linux/platform_data/dma-imx-sdma.h new file mode 100644 index 000000000000..3a3942823c20 --- /dev/null +++ b/include/linux/platform_data/dma-imx-sdma.h @@ -0,0 +1,59 @@ +#ifndef __MACH_MXC_SDMA_H__ +#define __MACH_MXC_SDMA_H__ + +/** + * struct sdma_script_start_addrs - SDMA script start pointers + * + * start addresses of the different functions in the physical + * address space of the SDMA engine. + */ +struct sdma_script_start_addrs { + s32 ap_2_ap_addr; + s32 ap_2_bp_addr; + s32 ap_2_ap_fixed_addr; + s32 bp_2_ap_addr; + s32 loopback_on_dsp_side_addr; + s32 mcu_interrupt_only_addr; + s32 firi_2_per_addr; + s32 firi_2_mcu_addr; + s32 per_2_firi_addr; + s32 mcu_2_firi_addr; + s32 uart_2_per_addr; + s32 uart_2_mcu_addr; + s32 per_2_app_addr; + s32 mcu_2_app_addr; + s32 per_2_per_addr; + s32 uartsh_2_per_addr; + s32 uartsh_2_mcu_addr; + s32 per_2_shp_addr; + s32 mcu_2_shp_addr; + s32 ata_2_mcu_addr; + s32 mcu_2_ata_addr; + s32 app_2_per_addr; + s32 app_2_mcu_addr; + s32 shp_2_per_addr; + s32 shp_2_mcu_addr; + s32 mshc_2_mcu_addr; + s32 mcu_2_mshc_addr; + s32 spdif_2_mcu_addr; + s32 mcu_2_spdif_addr; + s32 asrc_2_mcu_addr; + s32 ext_mem_2_ipu_addr; + s32 descrambler_addr; + s32 dptc_dvfs_addr; + s32 utra_addr; + s32 ram_code_start_addr; +}; + +/** + * struct sdma_platform_data - platform specific data for SDMA engine + * + * @fw_name The firmware name + * @script_addrs SDMA scripts addresses in SDMA ROM + */ +struct sdma_platform_data { + char *fw_name; + struct sdma_script_start_addrs *script_addrs; +}; + +#endif /* __MACH_MXC_SDMA_H__ */ diff --git a/include/linux/platform_data/dma-imx.h b/include/linux/platform_data/dma-imx.h new file mode 100644 index 000000000000..1b9080385b46 --- /dev/null +++ b/include/linux/platform_data/dma-imx.h @@ -0,0 +1,67 @@ +/* + * Copyright 2004-2009 Freescale Semiconductor, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_ARCH_MXC_DMA_H__ +#define __ASM_ARCH_MXC_DMA_H__ + +#include <linux/scatterlist.h> +#include <linux/device.h> +#include <linux/dmaengine.h> + +/* + * This enumerates peripheral types. Used for SDMA. + */ +enum sdma_peripheral_type { + IMX_DMATYPE_SSI, /* MCU domain SSI */ + IMX_DMATYPE_SSI_SP, /* Shared SSI */ + IMX_DMATYPE_MMC, /* MMC */ + IMX_DMATYPE_SDHC, /* SDHC */ + IMX_DMATYPE_UART, /* MCU domain UART */ + IMX_DMATYPE_UART_SP, /* Shared UART */ + IMX_DMATYPE_FIRI, /* FIRI */ + IMX_DMATYPE_CSPI, /* MCU domain CSPI */ + IMX_DMATYPE_CSPI_SP, /* Shared CSPI */ + IMX_DMATYPE_SIM, /* SIM */ + IMX_DMATYPE_ATA, /* ATA */ + IMX_DMATYPE_CCM, /* CCM */ + IMX_DMATYPE_EXT, /* External peripheral */ + IMX_DMATYPE_MSHC, /* Memory Stick Host Controller */ + IMX_DMATYPE_MSHC_SP, /* Shared Memory Stick Host Controller */ + IMX_DMATYPE_DSP, /* DSP */ + IMX_DMATYPE_MEMORY, /* Memory */ + IMX_DMATYPE_FIFO_MEMORY,/* FIFO type Memory */ + IMX_DMATYPE_SPDIF, /* SPDIF */ + IMX_DMATYPE_IPU_MEMORY, /* IPU Memory */ + IMX_DMATYPE_ASRC, /* ASRC */ + IMX_DMATYPE_ESAI, /* ESAI */ +}; + +enum imx_dma_prio { + DMA_PRIO_HIGH = 0, + DMA_PRIO_MEDIUM = 1, + DMA_PRIO_LOW = 2 +}; + +struct imx_dma_data { + int dma_request; /* DMA request line */ + enum sdma_peripheral_type peripheral_type; + int priority; +}; + +static inline int imx_dma_is_ipu(struct dma_chan *chan) +{ + return !strcmp(dev_name(chan->device->dev), "ipu-core"); +} + +static inline int imx_dma_is_general_purpose(struct dma_chan *chan) +{ + return strstr(dev_name(chan->device->dev), "sdma") || + !strcmp(dev_name(chan->device->dev), "imx-dma"); +} + +#endif diff --git a/include/linux/platform_data/dma-mmp_tdma.h b/include/linux/platform_data/dma-mmp_tdma.h new file mode 100644 index 000000000000..239e0fc1bb1f --- /dev/null +++ b/include/linux/platform_data/dma-mmp_tdma.h @@ -0,0 +1,35 @@ +/* + * linux/arch/arm/mach-mmp/include/mach/sram.h + * + * SRAM Memory Management + * + * Copyright (c) 2011 Marvell Semiconductors Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#ifndef __ASM_ARCH_SRAM_H +#define __ASM_ARCH_SRAM_H + +#include <linux/genalloc.h> + +/* ARBITRARY: SRAM allocations are multiples of this 2^N size */ +#define SRAM_GRANULARITY 512 + +enum sram_type { + MMP_SRAM_UNDEFINED = 0, + MMP_ASRAM, + MMP_ISRAM, +}; + +struct sram_platdata { + char *pool_name; + int granularity; +}; + +extern struct gen_pool *sram_get_gpool(char *pool_name); + +#endif /* __ASM_ARCH_SRAM_H */ diff --git a/include/linux/platform_data/dma-mv_xor.h b/include/linux/platform_data/dma-mv_xor.h new file mode 100644 index 000000000000..2ba1f7d76eef --- /dev/null +++ b/include/linux/platform_data/dma-mv_xor.h @@ -0,0 +1,24 @@ +/* + * arch/arm/plat-orion/include/plat/mv_xor.h + * + * Marvell XOR platform device data definition file. + */ + +#ifndef __PLAT_MV_XOR_H +#define __PLAT_MV_XOR_H + +#include <linux/dmaengine.h> +#include <linux/mbus.h> + +#define MV_XOR_SHARED_NAME "mv_xor_shared" +#define MV_XOR_NAME "mv_xor" + +struct mv_xor_platform_data { + struct platform_device *shared; + int hw_id; + dma_cap_mask_t cap_mask; + size_t pool_size; +}; + + +#endif diff --git a/include/linux/platform_data/dsp-omap.h b/include/linux/platform_data/dsp-omap.h new file mode 100644 index 000000000000..5927709b1908 --- /dev/null +++ b/include/linux/platform_data/dsp-omap.h @@ -0,0 +1,34 @@ +#ifndef __OMAP_DSP_H__ +#define __OMAP_DSP_H__ + +#include <linux/types.h> + +struct omap_dsp_platform_data { + void (*dsp_set_min_opp) (u8 opp_id); + u8 (*dsp_get_opp) (void); + void (*cpu_set_freq) (unsigned long f); + unsigned long (*cpu_get_freq) (void); + unsigned long mpu_speed[6]; + + /* functions to write and read PRCM registers */ + void (*dsp_prm_write)(u32, s16 , u16); + u32 (*dsp_prm_read)(s16 , u16); + u32 (*dsp_prm_rmw_bits)(u32, u32, s16, s16); + void (*dsp_cm_write)(u32, s16 , u16); + u32 (*dsp_cm_read)(s16 , u16); + u32 (*dsp_cm_rmw_bits)(u32, u32, s16, s16); + + void (*set_bootaddr)(u32); + void (*set_bootmode)(u8); + + phys_addr_t phys_mempool_base; + phys_addr_t phys_mempool_size; +}; + +#if defined(CONFIG_TIDSPBRIDGE) || defined(CONFIG_TIDSPBRIDGE_MODULE) +extern void omap_dsp_reserve_sdram_memblock(void); +#else +static inline void omap_dsp_reserve_sdram_memblock(void) { } +#endif + +#endif diff --git a/include/linux/platform_data/eth-netx.h b/include/linux/platform_data/eth-netx.h new file mode 100644 index 000000000000..88af1ac28ead --- /dev/null +++ b/include/linux/platform_data/eth-netx.h @@ -0,0 +1,27 @@ +/* + * arch/arm/mach-netx/include/mach/eth.h + * + * Copyright (c) 2005 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef ASMARM_ARCH_ETH_H +#define ASMARM_ARCH_ETH_H + +struct netxeth_platform_data { + unsigned int xcno; /* number of xmac/xpec engine this eth uses */ +}; + +#endif diff --git a/include/linux/platform_data/gpio-omap.h b/include/linux/platform_data/gpio-omap.h new file mode 100644 index 000000000000..e8741c2678d5 --- /dev/null +++ b/include/linux/platform_data/gpio-omap.h @@ -0,0 +1,217 @@ +/* + * OMAP GPIO handling defines and functions + * + * Copyright (C) 2003-2005 Nokia Corporation + * + * Written by Juha Yrjölä <juha.yrjola@nokia.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#ifndef __ASM_ARCH_OMAP_GPIO_H +#define __ASM_ARCH_OMAP_GPIO_H + +#include <linux/io.h> +#include <linux/platform_device.h> +#include <mach/irqs.h> + +#define OMAP1_MPUIO_BASE 0xfffb5000 + +/* + * These are the omap15xx/16xx offsets. The omap7xx offset are + * OMAP_MPUIO_ / 2 offsets below. + */ +#define OMAP_MPUIO_INPUT_LATCH 0x00 +#define OMAP_MPUIO_OUTPUT 0x04 +#define OMAP_MPUIO_IO_CNTL 0x08 +#define OMAP_MPUIO_KBR_LATCH 0x10 +#define OMAP_MPUIO_KBC 0x14 +#define OMAP_MPUIO_GPIO_EVENT_MODE 0x18 +#define OMAP_MPUIO_GPIO_INT_EDGE 0x1c +#define OMAP_MPUIO_KBD_INT 0x20 +#define OMAP_MPUIO_GPIO_INT 0x24 +#define OMAP_MPUIO_KBD_MASKIT 0x28 +#define OMAP_MPUIO_GPIO_MASKIT 0x2c +#define OMAP_MPUIO_GPIO_DEBOUNCING 0x30 +#define OMAP_MPUIO_LATCH 0x34 + +#define OMAP34XX_NR_GPIOS 6 + +/* + * OMAP1510 GPIO registers + */ +#define OMAP1510_GPIO_DATA_INPUT 0x00 +#define OMAP1510_GPIO_DATA_OUTPUT 0x04 +#define OMAP1510_GPIO_DIR_CONTROL 0x08 +#define OMAP1510_GPIO_INT_CONTROL 0x0c +#define OMAP1510_GPIO_INT_MASK 0x10 +#define OMAP1510_GPIO_INT_STATUS 0x14 +#define OMAP1510_GPIO_PIN_CONTROL 0x18 + +#define OMAP1510_IH_GPIO_BASE 64 + +/* + * OMAP1610 specific GPIO registers + */ +#define OMAP1610_GPIO_REVISION 0x0000 +#define OMAP1610_GPIO_SYSCONFIG 0x0010 +#define OMAP1610_GPIO_SYSSTATUS 0x0014 +#define OMAP1610_GPIO_IRQSTATUS1 0x0018 +#define OMAP1610_GPIO_IRQENABLE1 0x001c +#define OMAP1610_GPIO_WAKEUPENABLE 0x0028 +#define OMAP1610_GPIO_DATAIN 0x002c +#define OMAP1610_GPIO_DATAOUT 0x0030 +#define OMAP1610_GPIO_DIRECTION 0x0034 +#define OMAP1610_GPIO_EDGE_CTRL1 0x0038 +#define OMAP1610_GPIO_EDGE_CTRL2 0x003c +#define OMAP1610_GPIO_CLEAR_IRQENABLE1 0x009c +#define OMAP1610_GPIO_CLEAR_WAKEUPENA 0x00a8 +#define OMAP1610_GPIO_CLEAR_DATAOUT 0x00b0 +#define OMAP1610_GPIO_SET_IRQENABLE1 0x00dc +#define OMAP1610_GPIO_SET_WAKEUPENA 0x00e8 +#define OMAP1610_GPIO_SET_DATAOUT 0x00f0 + +/* + * OMAP7XX specific GPIO registers + */ +#define OMAP7XX_GPIO_DATA_INPUT 0x00 +#define OMAP7XX_GPIO_DATA_OUTPUT 0x04 +#define OMAP7XX_GPIO_DIR_CONTROL 0x08 +#define OMAP7XX_GPIO_INT_CONTROL 0x0c +#define OMAP7XX_GPIO_INT_MASK 0x10 +#define OMAP7XX_GPIO_INT_STATUS 0x14 + +/* + * omap2+ specific GPIO registers + */ +#define OMAP24XX_GPIO_REVISION 0x0000 +#define OMAP24XX_GPIO_IRQSTATUS1 0x0018 +#define OMAP24XX_GPIO_IRQSTATUS2 0x0028 +#define OMAP24XX_GPIO_IRQENABLE2 0x002c +#define OMAP24XX_GPIO_IRQENABLE1 0x001c +#define OMAP24XX_GPIO_WAKE_EN 0x0020 +#define OMAP24XX_GPIO_CTRL 0x0030 +#define OMAP24XX_GPIO_OE 0x0034 +#define OMAP24XX_GPIO_DATAIN 0x0038 +#define OMAP24XX_GPIO_DATAOUT 0x003c +#define OMAP24XX_GPIO_LEVELDETECT0 0x0040 +#define OMAP24XX_GPIO_LEVELDETECT1 0x0044 +#define OMAP24XX_GPIO_RISINGDETECT 0x0048 +#define OMAP24XX_GPIO_FALLINGDETECT 0x004c +#define OMAP24XX_GPIO_DEBOUNCE_EN 0x0050 +#define OMAP24XX_GPIO_DEBOUNCE_VAL 0x0054 +#define OMAP24XX_GPIO_CLEARIRQENABLE1 0x0060 +#define OMAP24XX_GPIO_SETIRQENABLE1 0x0064 +#define OMAP24XX_GPIO_CLEARWKUENA 0x0080 +#define OMAP24XX_GPIO_SETWKUENA 0x0084 +#define OMAP24XX_GPIO_CLEARDATAOUT 0x0090 +#define OMAP24XX_GPIO_SETDATAOUT 0x0094 + +#define OMAP4_GPIO_REVISION 0x0000 +#define OMAP4_GPIO_EOI 0x0020 +#define OMAP4_GPIO_IRQSTATUSRAW0 0x0024 +#define OMAP4_GPIO_IRQSTATUSRAW1 0x0028 +#define OMAP4_GPIO_IRQSTATUS0 0x002c +#define OMAP4_GPIO_IRQSTATUS1 0x0030 +#define OMAP4_GPIO_IRQSTATUSSET0 0x0034 +#define OMAP4_GPIO_IRQSTATUSSET1 0x0038 +#define OMAP4_GPIO_IRQSTATUSCLR0 0x003c +#define OMAP4_GPIO_IRQSTATUSCLR1 0x0040 +#define OMAP4_GPIO_IRQWAKEN0 0x0044 +#define OMAP4_GPIO_IRQWAKEN1 0x0048 +#define OMAP4_GPIO_IRQENABLE1 0x011c +#define OMAP4_GPIO_WAKE_EN 0x0120 +#define OMAP4_GPIO_IRQSTATUS2 0x0128 +#define OMAP4_GPIO_IRQENABLE2 0x012c +#define OMAP4_GPIO_CTRL 0x0130 +#define OMAP4_GPIO_OE 0x0134 +#define OMAP4_GPIO_DATAIN 0x0138 +#define OMAP4_GPIO_DATAOUT 0x013c +#define OMAP4_GPIO_LEVELDETECT0 0x0140 +#define OMAP4_GPIO_LEVELDETECT1 0x0144 +#define OMAP4_GPIO_RISINGDETECT 0x0148 +#define OMAP4_GPIO_FALLINGDETECT 0x014c +#define OMAP4_GPIO_DEBOUNCENABLE 0x0150 +#define OMAP4_GPIO_DEBOUNCINGTIME 0x0154 +#define OMAP4_GPIO_CLEARIRQENABLE1 0x0160 +#define OMAP4_GPIO_SETIRQENABLE1 0x0164 +#define OMAP4_GPIO_CLEARWKUENA 0x0180 +#define OMAP4_GPIO_SETWKUENA 0x0184 +#define OMAP4_GPIO_CLEARDATAOUT 0x0190 +#define OMAP4_GPIO_SETDATAOUT 0x0194 + +#define OMAP_MAX_GPIO_LINES 192 + +#define OMAP_MPUIO(nr) (OMAP_MAX_GPIO_LINES + (nr)) +#define OMAP_GPIO_IS_MPUIO(nr) ((nr) >= OMAP_MAX_GPIO_LINES) + +struct omap_gpio_dev_attr { + int bank_width; /* GPIO bank width */ + bool dbck_flag; /* dbck required or not - True for OMAP3&4 */ +}; + +struct omap_gpio_reg_offs { + u16 revision; + u16 direction; + u16 datain; + u16 dataout; + u16 set_dataout; + u16 clr_dataout; + u16 irqstatus; + u16 irqstatus2; + u16 irqstatus_raw0; + u16 irqstatus_raw1; + u16 irqenable; + u16 irqenable2; + u16 set_irqenable; + u16 clr_irqenable; + u16 debounce; + u16 debounce_en; + u16 ctrl; + u16 wkup_en; + u16 leveldetect0; + u16 leveldetect1; + u16 risingdetect; + u16 fallingdetect; + u16 irqctrl; + u16 edgectrl1; + u16 edgectrl2; + u16 pinctrl; + + bool irqenable_inv; +}; + +struct omap_gpio_platform_data { + int bank_type; + int bank_width; /* GPIO bank width */ + int bank_stride; /* Only needed for omap1 MPUIO */ + bool dbck_flag; /* dbck required or not - True for OMAP3&4 */ + bool loses_context; /* whether the bank would ever lose context */ + bool is_mpuio; /* whether the bank is of type MPUIO */ + u32 non_wakeup_gpios; + + struct omap_gpio_reg_offs *regs; + + /* Return context loss count due to PM states changing */ + int (*get_context_loss_count)(struct device *dev); +}; + +extern void omap2_gpio_prepare_for_idle(int off_mode); +extern void omap2_gpio_resume_after_idle(void); +extern void omap_set_gpio_debounce(int gpio, int enable); +extern void omap_set_gpio_debounce_time(int gpio, int enable); + +#endif diff --git a/include/linux/platform_data/hwmon-s3c.h b/include/linux/platform_data/hwmon-s3c.h new file mode 100644 index 000000000000..c167e4429bc7 --- /dev/null +++ b/include/linux/platform_data/hwmon-s3c.h @@ -0,0 +1,51 @@ +/* linux/arch/arm/plat-s3c/include/plat/hwmon.h + * + * Copyright 2005 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * S3C - HWMon interface for ADC + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_ADC_HWMON_H +#define __ASM_ARCH_ADC_HWMON_H __FILE__ + +/** + * s3c_hwmon_chcfg - channel configuration + * @name: The name to give this channel. + * @mult: Multiply the ADC value read by this. + * @div: Divide the value from the ADC by this. + * + * The value read from the ADC is converted to a value that + * hwmon expects (mV) by result = (value_read * @mult) / @div. + */ +struct s3c_hwmon_chcfg { + const char *name; + unsigned int mult; + unsigned int div; +}; + +/** + * s3c_hwmon_pdata - HWMON platform data + * @in: One configuration for each possible channel used. + */ +struct s3c_hwmon_pdata { + struct s3c_hwmon_chcfg *in[8]; +}; + +/** + * s3c_hwmon_set_platdata - Set platform data for S3C HWMON device + * @pd: Platform data to register to device. + * + * Register the given platform data for use with the S3C HWMON device. + * The call will copy the platform data, so the board definitions can + * make the structure itself __initdata. + */ +extern void __init s3c_hwmon_set_platdata(struct s3c_hwmon_pdata *pd); + +#endif /* __ASM_ARCH_ADC_HWMON_H */ + diff --git a/include/linux/platform_data/i2c-davinci.h b/include/linux/platform_data/i2c-davinci.h new file mode 100644 index 000000000000..2312d197dfb7 --- /dev/null +++ b/include/linux/platform_data/i2c-davinci.h @@ -0,0 +1,26 @@ +/* + * DaVinci I2C controller platform_device info + * + * Author: Vladimir Barinov, MontaVista Software, Inc. <source@mvista.com> + * + * 2007 (c) MontaVista Software, Inc. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. +*/ + +#ifndef __ASM_ARCH_I2C_H +#define __ASM_ARCH_I2C_H + +/* All frequencies are expressed in kHz */ +struct davinci_i2c_platform_data { + unsigned int bus_freq; /* standard bus frequency (kHz) */ + unsigned int bus_delay; /* post-transaction delay (usec) */ + unsigned int sda_pin; /* GPIO pin ID to use for SDA */ + unsigned int scl_pin; /* GPIO pin ID to use for SCL */ +}; + +/* for board setup code */ +void davinci_init_i2c(struct davinci_i2c_platform_data *); + +#endif /* __ASM_ARCH_I2C_H */ diff --git a/include/linux/platform_data/i2c-imx.h b/include/linux/platform_data/i2c-imx.h new file mode 100644 index 000000000000..8289d915e615 --- /dev/null +++ b/include/linux/platform_data/i2c-imx.h @@ -0,0 +1,21 @@ +/* + * i2c.h - i.MX I2C driver header file + * + * Copyright (c) 2008, Darius Augulis <augulis.darius@gmail.com> + * + * This file is released under the GPLv2 + */ + +#ifndef __ASM_ARCH_I2C_H_ +#define __ASM_ARCH_I2C_H_ + +/** + * struct imxi2c_platform_data - structure of platform data for MXC I2C driver + * @bitrate: Bus speed measured in Hz + * + **/ +struct imxi2c_platform_data { + u32 bitrate; +}; + +#endif /* __ASM_ARCH_I2C_H_ */ diff --git a/include/linux/platform_data/i2c-nuc900.h b/include/linux/platform_data/i2c-nuc900.h new file mode 100644 index 000000000000..9ffb12d06e91 --- /dev/null +++ b/include/linux/platform_data/i2c-nuc900.h @@ -0,0 +1,9 @@ +#ifndef __ASM_ARCH_NUC900_I2C_H +#define __ASM_ARCH_NUC900_I2C_H + +struct nuc900_platform_i2c { + int bus_num; + unsigned long bus_freq; +}; + +#endif /* __ASM_ARCH_NUC900_I2C_H */ diff --git a/include/linux/platform_data/i2c-s3c2410.h b/include/linux/platform_data/i2c-s3c2410.h new file mode 100644 index 000000000000..51d52e767a19 --- /dev/null +++ b/include/linux/platform_data/i2c-s3c2410.h @@ -0,0 +1,77 @@ +/* arch/arm/plat-s3c/include/plat/iic.h + * + * Copyright 2004-2009 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * S3C - I2C Controller platform_device info + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_IIC_H +#define __ASM_ARCH_IIC_H __FILE__ + +#define S3C_IICFLG_FILTER (1<<0) /* enable s3c2440 filter */ + +/** + * struct s3c2410_platform_i2c - Platform data for s3c I2C. + * @bus_num: The bus number to use (if possible). + * @flags: Any flags for the I2C bus (E.g. S3C_IICFLK_FILTER). + * @slave_addr: The I2C address for the slave device (if enabled). + * @frequency: The desired frequency in Hz of the bus. This is + * guaranteed to not be exceeded. If the caller does + * not care, use zero and the driver will select a + * useful default. + * @sda_delay: The delay (in ns) applied to SDA edges. + * @cfg_gpio: A callback to configure the pins for I2C operation. + */ +struct s3c2410_platform_i2c { + int bus_num; + unsigned int flags; + unsigned int slave_addr; + unsigned long frequency; + unsigned int sda_delay; + + void (*cfg_gpio)(struct platform_device *dev); +}; + +/** + * s3c_i2c0_set_platdata - set platform data for i2c0 device + * @i2c: The platform data to set, or NULL for default data. + * + * Register the given platform data for use with the i2c0 device. This + * call copies the platform data, so the caller can use __initdata for + * their copy. + * + * This call will set cfg_gpio if is null to the default platform + * implementation. + * + * Any user of s3c_device_i2c0 should call this, even if it is with + * NULL to ensure that the device is given the default platform data + * as the driver will no longer carry defaults. + */ +extern void s3c_i2c0_set_platdata(struct s3c2410_platform_i2c *i2c); +extern void s3c_i2c1_set_platdata(struct s3c2410_platform_i2c *i2c); +extern void s3c_i2c2_set_platdata(struct s3c2410_platform_i2c *i2c); +extern void s3c_i2c3_set_platdata(struct s3c2410_platform_i2c *i2c); +extern void s3c_i2c4_set_platdata(struct s3c2410_platform_i2c *i2c); +extern void s3c_i2c5_set_platdata(struct s3c2410_platform_i2c *i2c); +extern void s3c_i2c6_set_platdata(struct s3c2410_platform_i2c *i2c); +extern void s3c_i2c7_set_platdata(struct s3c2410_platform_i2c *i2c); +extern void s5p_i2c_hdmiphy_set_platdata(struct s3c2410_platform_i2c *i2c); + +/* defined by architecture to configure gpio */ +extern void s3c_i2c0_cfg_gpio(struct platform_device *dev); +extern void s3c_i2c1_cfg_gpio(struct platform_device *dev); +extern void s3c_i2c2_cfg_gpio(struct platform_device *dev); +extern void s3c_i2c3_cfg_gpio(struct platform_device *dev); +extern void s3c_i2c4_cfg_gpio(struct platform_device *dev); +extern void s3c_i2c5_cfg_gpio(struct platform_device *dev); +extern void s3c_i2c6_cfg_gpio(struct platform_device *dev); +extern void s3c_i2c7_cfg_gpio(struct platform_device *dev); + +extern struct s3c2410_platform_i2c default_i2c_data; + +#endif /* __ASM_ARCH_IIC_H */ diff --git a/include/linux/platform_data/irda-pxaficp.h b/include/linux/platform_data/irda-pxaficp.h new file mode 100644 index 000000000000..3cd41f77dda4 --- /dev/null +++ b/include/linux/platform_data/irda-pxaficp.h @@ -0,0 +1,25 @@ +#ifndef ASMARM_ARCH_IRDA_H +#define ASMARM_ARCH_IRDA_H + +/* board specific transceiver capabilities */ + +#define IR_OFF 1 +#define IR_SIRMODE 2 +#define IR_FIRMODE 4 + +struct pxaficp_platform_data { + int transceiver_cap; + void (*transceiver_mode)(struct device *dev, int mode); + int (*startup)(struct device *dev); + void (*shutdown)(struct device *dev); + int gpio_pwdown; /* powerdown GPIO for the IrDA chip */ + bool gpio_pwdown_inverted; /* gpio_pwdown is inverted */ +}; + +extern void pxa_set_ficp_info(struct pxaficp_platform_data *info); + +#if defined(CONFIG_PXA25x) || defined(CONFIG_PXA27x) +void pxa2xx_transceiver_mode(struct device *dev, int mode); +#endif + +#endif diff --git a/include/linux/platform_data/keyboard-pxa930_rotary.h b/include/linux/platform_data/keyboard-pxa930_rotary.h new file mode 100644 index 000000000000..053587caffdd --- /dev/null +++ b/include/linux/platform_data/keyboard-pxa930_rotary.h @@ -0,0 +1,20 @@ +#ifndef __ASM_ARCH_PXA930_ROTARY_H +#define __ASM_ARCH_PXA930_ROTARY_H + +/* NOTE: + * + * rotary can be either interpreted as a ralative input event (e.g. + * REL_WHEEL or REL_HWHEEL) or a specific key event (e.g. UP/DOWN + * or LEFT/RIGHT), depending on if up_key & down_key are assigned + * or rel_code is assigned a non-zero value. When all are non-zero, + * up_key and down_key will be preferred. + */ +struct pxa930_rotary_platform_data { + int up_key; + int down_key; + int rel_code; +}; + +void __init pxa930_set_rotarykey_info(struct pxa930_rotary_platform_data *info); + +#endif /* __ASM_ARCH_PXA930_ROTARY_H */ diff --git a/include/linux/platform_data/keyboard-spear.h b/include/linux/platform_data/keyboard-spear.h new file mode 100644 index 000000000000..9248e3a7e333 --- /dev/null +++ b/include/linux/platform_data/keyboard-spear.h @@ -0,0 +1,164 @@ +/* + * Copyright (C) 2010 ST Microelectronics + * Rajeev Kumar<rajeev-dlh.kumar@st.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __PLAT_KEYBOARD_H +#define __PLAT_KEYBOARD_H + +#include <linux/bitops.h> +#include <linux/input.h> +#include <linux/input/matrix_keypad.h> +#include <linux/types.h> + +#define DECLARE_9x9_KEYMAP(_name) \ +int _name[] = { \ + KEY(0, 0, KEY_ESC), \ + KEY(0, 1, KEY_1), \ + KEY(0, 2, KEY_2), \ + KEY(0, 3, KEY_3), \ + KEY(0, 4, KEY_4), \ + KEY(0, 5, KEY_5), \ + KEY(0, 6, KEY_6), \ + KEY(0, 7, KEY_7), \ + KEY(0, 8, KEY_8), \ + KEY(1, 0, KEY_9), \ + KEY(1, 1, KEY_MINUS), \ + KEY(1, 2, KEY_EQUAL), \ + KEY(1, 3, KEY_BACKSPACE), \ + KEY(1, 4, KEY_TAB), \ + KEY(1, 5, KEY_Q), \ + KEY(1, 6, KEY_W), \ + KEY(1, 7, KEY_E), \ + KEY(1, 8, KEY_R), \ + KEY(2, 0, KEY_T), \ + KEY(2, 1, KEY_Y), \ + KEY(2, 2, KEY_U), \ + KEY(2, 3, KEY_I), \ + KEY(2, 4, KEY_O), \ + KEY(2, 5, KEY_P), \ + KEY(2, 6, KEY_LEFTBRACE), \ + KEY(2, 7, KEY_RIGHTBRACE), \ + KEY(2, 8, KEY_ENTER), \ + KEY(3, 0, KEY_LEFTCTRL), \ + KEY(3, 1, KEY_A), \ + KEY(3, 2, KEY_S), \ + KEY(3, 3, KEY_D), \ + KEY(3, 4, KEY_F), \ + KEY(3, 5, KEY_G), \ + KEY(3, 6, KEY_H), \ + KEY(3, 7, KEY_J), \ + KEY(3, 8, KEY_K), \ + KEY(4, 0, KEY_L), \ + KEY(4, 1, KEY_SEMICOLON), \ + KEY(4, 2, KEY_APOSTROPHE), \ + KEY(4, 3, KEY_GRAVE), \ + KEY(4, 4, KEY_LEFTSHIFT), \ + KEY(4, 5, KEY_BACKSLASH), \ + KEY(4, 6, KEY_Z), \ + KEY(4, 7, KEY_X), \ + KEY(4, 8, KEY_C), \ + KEY(5, 0, KEY_V), \ + KEY(5, 1, KEY_B), \ + KEY(5, 2, KEY_N), \ + KEY(5, 3, KEY_M), \ + KEY(5, 4, KEY_COMMA), \ + KEY(5, 5, KEY_DOT), \ + KEY(5, 6, KEY_SLASH), \ + KEY(5, 7, KEY_RIGHTSHIFT), \ + KEY(5, 8, KEY_KPASTERISK), \ + KEY(6, 0, KEY_LEFTALT), \ + KEY(6, 1, KEY_SPACE), \ + KEY(6, 2, KEY_CAPSLOCK), \ + KEY(6, 3, KEY_F1), \ + KEY(6, 4, KEY_F2), \ + KEY(6, 5, KEY_F3), \ + KEY(6, 6, KEY_F4), \ + KEY(6, 7, KEY_F5), \ + KEY(6, 8, KEY_F6), \ + KEY(7, 0, KEY_F7), \ + KEY(7, 1, KEY_F8), \ + KEY(7, 2, KEY_F9), \ + KEY(7, 3, KEY_F10), \ + KEY(7, 4, KEY_NUMLOCK), \ + KEY(7, 5, KEY_SCROLLLOCK), \ + KEY(7, 6, KEY_KP7), \ + KEY(7, 7, KEY_KP8), \ + KEY(7, 8, KEY_KP9), \ + KEY(8, 0, KEY_KPMINUS), \ + KEY(8, 1, KEY_KP4), \ + KEY(8, 2, KEY_KP5), \ + KEY(8, 3, KEY_KP6), \ + KEY(8, 4, KEY_KPPLUS), \ + KEY(8, 5, KEY_KP1), \ + KEY(8, 6, KEY_KP2), \ + KEY(8, 7, KEY_KP3), \ + KEY(8, 8, KEY_KP0), \ +} + +#define DECLARE_6x6_KEYMAP(_name) \ +int _name[] = { \ + KEY(0, 0, KEY_RESERVED), \ + KEY(0, 1, KEY_1), \ + KEY(0, 2, KEY_2), \ + KEY(0, 3, KEY_3), \ + KEY(0, 4, KEY_4), \ + KEY(0, 5, KEY_5), \ + KEY(1, 0, KEY_Q), \ + KEY(1, 1, KEY_W), \ + KEY(1, 2, KEY_E), \ + KEY(1, 3, KEY_R), \ + KEY(1, 4, KEY_T), \ + KEY(1, 5, KEY_Y), \ + KEY(2, 0, KEY_D), \ + KEY(2, 1, KEY_F), \ + KEY(2, 2, KEY_G), \ + KEY(2, 3, KEY_H), \ + KEY(2, 4, KEY_J), \ + KEY(2, 5, KEY_K), \ + KEY(3, 0, KEY_B), \ + KEY(3, 1, KEY_N), \ + KEY(3, 2, KEY_M), \ + KEY(3, 3, KEY_COMMA), \ + KEY(3, 4, KEY_DOT), \ + KEY(3, 5, KEY_SLASH), \ + KEY(4, 0, KEY_F6), \ + KEY(4, 1, KEY_F7), \ + KEY(4, 2, KEY_F8), \ + KEY(4, 3, KEY_F9), \ + KEY(4, 4, KEY_F10), \ + KEY(4, 5, KEY_NUMLOCK), \ + KEY(5, 0, KEY_KP2), \ + KEY(5, 1, KEY_KP3), \ + KEY(5, 2, KEY_KP0), \ + KEY(5, 3, KEY_KPDOT), \ + KEY(5, 4, KEY_RO), \ + KEY(5, 5, KEY_ZENKAKUHANKAKU), \ +} + +#define KEYPAD_9x9 0 +#define KEYPAD_6x6 1 +#define KEYPAD_2x2 2 + +/** + * struct kbd_platform_data - spear keyboard platform data + * keymap: pointer to keymap data (table and size) + * rep: enables key autorepeat + * mode: choose keyboard support(9x9, 6x6, 2x2) + * suspended_rate: rate at which keyboard would operate in suspended mode + * + * This structure is supposed to be used by platform code to supply + * keymaps to drivers that implement keyboards. + */ +struct kbd_platform_data { + const struct matrix_keymap_data *keymap; + bool rep; + unsigned int mode; + unsigned int suspended_rate; +}; + +#endif /* __PLAT_KEYBOARD_H */ diff --git a/include/linux/platform_data/keypad-ep93xx.h b/include/linux/platform_data/keypad-ep93xx.h new file mode 100644 index 000000000000..1e2f4e97f428 --- /dev/null +++ b/include/linux/platform_data/keypad-ep93xx.h @@ -0,0 +1,35 @@ +/* + * arch/arm/mach-ep93xx/include/mach/ep93xx_keypad.h + */ + +#ifndef __ASM_ARCH_EP93XX_KEYPAD_H +#define __ASM_ARCH_EP93XX_KEYPAD_H + +struct matrix_keymap_data; + +/* flags for the ep93xx_keypad driver */ +#define EP93XX_KEYPAD_DISABLE_3_KEY (1<<0) /* disable 3-key reset */ +#define EP93XX_KEYPAD_DIAG_MODE (1<<1) /* diagnostic mode */ +#define EP93XX_KEYPAD_BACK_DRIVE (1<<2) /* back driving mode */ +#define EP93XX_KEYPAD_TEST_MODE (1<<3) /* scan only column 0 */ +#define EP93XX_KEYPAD_KDIV (1<<4) /* 1/4 clock or 1/16 clock */ +#define EP93XX_KEYPAD_AUTOREPEAT (1<<5) /* enable key autorepeat */ + +/** + * struct ep93xx_keypad_platform_data - platform specific device structure + * @keymap_data: pointer to &matrix_keymap_data + * @debounce: debounce start count; terminal count is 0xff + * @prescale: row/column counter pre-scaler load value + * @flags: see above + */ +struct ep93xx_keypad_platform_data { + struct matrix_keymap_data *keymap_data; + unsigned int debounce; + unsigned int prescale; + unsigned int flags; +}; + +#define EP93XX_MATRIX_ROWS (8) +#define EP93XX_MATRIX_COLS (8) + +#endif /* __ASM_ARCH_EP93XX_KEYPAD_H */ diff --git a/include/linux/platform_data/keypad-nomadik-ske.h b/include/linux/platform_data/keypad-nomadik-ske.h new file mode 100644 index 000000000000..31382fbc07dc --- /dev/null +++ b/include/linux/platform_data/keypad-nomadik-ske.h @@ -0,0 +1,50 @@ +/* + * Copyright (C) ST-Ericsson SA 2010 + * + * License Terms: GNU General Public License v2 + * Author: Naveen Kumar Gaddipati <naveen.gaddipati@stericsson.com> + * + * ux500 Scroll key and Keypad Encoder (SKE) header + */ + +#ifndef __SKE_H +#define __SKE_H + +#include <linux/input/matrix_keypad.h> + +/* register definitions for SKE peripheral */ +#define SKE_CR 0x00 +#define SKE_VAL0 0x04 +#define SKE_VAL1 0x08 +#define SKE_DBCR 0x0C +#define SKE_IMSC 0x10 +#define SKE_RIS 0x14 +#define SKE_MIS 0x18 +#define SKE_ICR 0x1C + +/* + * Keypad module + */ + +/** + * struct keypad_platform_data - structure for platform specific data + * @init: pointer to keypad init function + * @exit: pointer to keypad deinitialisation function + * @keymap_data: matrix scan code table for keycodes + * @krow: maximum number of rows + * @kcol: maximum number of columns + * @debounce_ms: platform specific debounce time + * @no_autorepeat: flag for auto repetition + * @wakeup_enable: allow waking up the system + */ +struct ske_keypad_platform_data { + int (*init)(void); + int (*exit)(void); + const struct matrix_keymap_data *keymap_data; + u8 krow; + u8 kcol; + u8 debounce_ms; + bool no_autorepeat; + bool wakeup_enable; +}; +#endif /*__SKE_KPD_H*/ diff --git a/include/linux/platform_data/keypad-omap.h b/include/linux/platform_data/keypad-omap.h new file mode 100644 index 000000000000..a6b21eddb212 --- /dev/null +++ b/include/linux/platform_data/keypad-omap.h @@ -0,0 +1,52 @@ +/* + * arch/arm/plat-omap/include/mach/keypad.h + * + * Copyright (C) 2006 Komal Shah <komal_shah802003@yahoo.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef ASMARM_ARCH_KEYPAD_H +#define ASMARM_ARCH_KEYPAD_H + +#ifndef CONFIG_ARCH_OMAP1 +#warning Please update the board to use matrix-keypad driver +#define omap_readw(reg) 0 +#define omap_writew(val, reg) do {} while (0) +#endif +#include <linux/input/matrix_keypad.h> + +struct omap_kp_platform_data { + int rows; + int cols; + const struct matrix_keymap_data *keymap_data; + bool rep; + unsigned long delay; + bool dbounce; + /* specific to OMAP242x*/ + unsigned int *row_gpios; + unsigned int *col_gpios; +}; + +/* Group (0..3) -- when multiple keys are pressed, only the + * keys pressed in the same group are considered as pressed. This is + * in order to workaround certain crappy HW designs that produce ghost + * keypresses. Two free bits, not used by neither row/col nor keynum, + * must be available for use as group bits. The below GROUP_SHIFT + * macro definition is based on some prior knowledge of the + * matrix_keypad defined KEY() macro internals. + */ +#define GROUP_SHIFT 14 +#define GROUP_0 (0 << GROUP_SHIFT) +#define GROUP_1 (1 << GROUP_SHIFT) +#define GROUP_2 (2 << GROUP_SHIFT) +#define GROUP_3 (3 << GROUP_SHIFT) +#define GROUP_MASK GROUP_3 +#if KEY_MAX & GROUP_MASK +#error Group bits in conflict with keynum bits +#endif + + +#endif + diff --git a/include/linux/platform_data/keypad-pxa27x.h b/include/linux/platform_data/keypad-pxa27x.h new file mode 100644 index 000000000000..5ce8d5e6ea51 --- /dev/null +++ b/include/linux/platform_data/keypad-pxa27x.h @@ -0,0 +1,73 @@ +#ifndef __ASM_ARCH_PXA27x_KEYPAD_H +#define __ASM_ARCH_PXA27x_KEYPAD_H + +#include <linux/input.h> +#include <linux/input/matrix_keypad.h> + +#define MAX_MATRIX_KEY_ROWS (8) +#define MAX_MATRIX_KEY_COLS (8) +#define MATRIX_ROW_SHIFT (3) +#define MAX_DIRECT_KEY_NUM (8) + +/* pxa3xx keypad platform specific parameters + * + * NOTE: + * 1. direct_key_num indicates the number of keys in the direct keypad + * _plus_ the number of rotary-encoder sensor inputs, this can be + * left as 0 if only rotary encoders are enabled, the driver will + * automatically calculate this + * + * 2. direct_key_map is the key code map for the direct keys, if rotary + * encoder(s) are enabled, direct key 0/1(2/3) will be ignored + * + * 3. rotary can be either interpreted as a relative input event (e.g. + * REL_WHEEL/REL_HWHEEL) or specific keys (e.g. UP/DOWN/LEFT/RIGHT) + * + * 4. matrix key and direct key will use the same debounce_interval by + * default, which should be sufficient in most cases + * + * pxa168 keypad platform specific parameter + * + * NOTE: + * clear_wakeup_event callback is a workaround required to clear the + * keypad interrupt. The keypad wake must be cleared in addition to + * reading the MI/DI bits in the KPC register. + */ +struct pxa27x_keypad_platform_data { + + /* code map for the matrix keys */ + unsigned int matrix_key_rows; + unsigned int matrix_key_cols; + unsigned int *matrix_key_map; + int matrix_key_map_size; + + /* direct keys */ + int direct_key_num; + unsigned int direct_key_map[MAX_DIRECT_KEY_NUM]; + /* the key output may be low active */ + int direct_key_low_active; + /* give board a chance to choose the start direct key */ + unsigned int direct_key_mask; + + /* rotary encoders 0 */ + int enable_rotary0; + int rotary0_rel_code; + int rotary0_up_key; + int rotary0_down_key; + + /* rotary encoders 1 */ + int enable_rotary1; + int rotary1_rel_code; + int rotary1_up_key; + int rotary1_down_key; + + /* key debounce interval */ + unsigned int debounce_interval; + + /* clear wakeup event requirement for pxa168 */ + void (*clear_wakeup_event)(void); +}; + +extern void pxa_set_keypad_info(struct pxa27x_keypad_platform_data *info); + +#endif /* __ASM_ARCH_PXA27x_KEYPAD_H */ diff --git a/include/linux/platform_data/keypad-w90p910.h b/include/linux/platform_data/keypad-w90p910.h new file mode 100644 index 000000000000..556778e8ddaa --- /dev/null +++ b/include/linux/platform_data/keypad-w90p910.h @@ -0,0 +1,15 @@ +#ifndef __ASM_ARCH_W90P910_KEYPAD_H +#define __ASM_ARCH_W90P910_KEYPAD_H + +#include <linux/input/matrix_keypad.h> + +extern void mfp_set_groupi(struct device *dev); + +struct w90p910_keypad_platform_data { + const struct matrix_keymap_data *keymap_data; + + unsigned int prescale; + unsigned int debounce; +}; + +#endif /* __ASM_ARCH_W90P910_KEYPAD_H */ diff --git a/include/linux/platform_data/keyscan-davinci.h b/include/linux/platform_data/keyscan-davinci.h new file mode 100644 index 000000000000..7a560e05bda8 --- /dev/null +++ b/include/linux/platform_data/keyscan-davinci.h @@ -0,0 +1,42 @@ +/* + * Copyright (C) 2009 Texas Instruments, Inc + * + * Author: Miguel Aguilar <miguel.aguilar@ridgerun.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef DAVINCI_KEYSCAN_H +#define DAVINCI_KEYSCAN_H + +#include <linux/io.h> + +enum davinci_matrix_types { + DAVINCI_KEYSCAN_MATRIX_4X4, + DAVINCI_KEYSCAN_MATRIX_5X3, +}; + +struct davinci_ks_platform_data { + int (*device_enable)(struct device *dev); + unsigned short *keymap; + u32 keymapsize; + u8 rep:1; + u8 strobe; + u8 interval; + u8 matrix_type; +}; + +#endif + diff --git a/include/linux/platform_data/lcd-mipid.h b/include/linux/platform_data/lcd-mipid.h new file mode 100644 index 000000000000..8e52c6572281 --- /dev/null +++ b/include/linux/platform_data/lcd-mipid.h @@ -0,0 +1,29 @@ +#ifndef __LCD_MIPID_H +#define __LCD_MIPID_H + +enum mipid_test_num { + MIPID_TEST_RGB_LINES, +}; + +enum mipid_test_result { + MIPID_TEST_SUCCESS, + MIPID_TEST_INVALID, + MIPID_TEST_FAILED, +}; + +#ifdef __KERNEL__ + +struct mipid_platform_data { + int nreset_gpio; + int data_lines; + + void (*shutdown)(struct mipid_platform_data *pdata); + void (*set_bklight_level)(struct mipid_platform_data *pdata, + int level); + int (*get_bklight_level)(struct mipid_platform_data *pdata); + int (*get_bklight_max)(struct mipid_platform_data *pdata); +}; + +#endif + +#endif diff --git a/include/linux/platform_data/leds-kirkwood-netxbig.h b/include/linux/platform_data/leds-kirkwood-netxbig.h new file mode 100644 index 000000000000..24b536ebdf13 --- /dev/null +++ b/include/linux/platform_data/leds-kirkwood-netxbig.h @@ -0,0 +1,55 @@ +/* + * arch/arm/mach-kirkwood/include/mach/leds-netxbig.h + * + * Platform data structure for netxbig LED driver + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __MACH_LEDS_NETXBIG_H +#define __MACH_LEDS_NETXBIG_H + +struct netxbig_gpio_ext { + unsigned *addr; + int num_addr; + unsigned *data; + int num_data; + unsigned enable; +}; + +enum netxbig_led_mode { + NETXBIG_LED_OFF, + NETXBIG_LED_ON, + NETXBIG_LED_SATA, + NETXBIG_LED_TIMER1, + NETXBIG_LED_TIMER2, + NETXBIG_LED_MODE_NUM, +}; + +#define NETXBIG_LED_INVALID_MODE NETXBIG_LED_MODE_NUM + +struct netxbig_led_timer { + unsigned long delay_on; + unsigned long delay_off; + enum netxbig_led_mode mode; +}; + +struct netxbig_led { + const char *name; + const char *default_trigger; + int mode_addr; + int *mode_val; + int bright_addr; +}; + +struct netxbig_led_platform_data { + struct netxbig_gpio_ext *gpio_ext; + struct netxbig_led_timer *timer; + int num_timer; + struct netxbig_led *leds; + int num_leds; +}; + +#endif /* __MACH_LEDS_NETXBIG_H */ diff --git a/include/linux/platform_data/leds-kirkwood-ns2.h b/include/linux/platform_data/leds-kirkwood-ns2.h new file mode 100644 index 000000000000..e21272e5f668 --- /dev/null +++ b/include/linux/platform_data/leds-kirkwood-ns2.h @@ -0,0 +1,26 @@ +/* + * arch/arm/mach-kirkwood/include/mach/leds-ns2.h + * + * Platform data structure for Network Space v2 LED driver + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __MACH_LEDS_NS2_H +#define __MACH_LEDS_NS2_H + +struct ns2_led { + const char *name; + const char *default_trigger; + unsigned cmd; + unsigned slow; +}; + +struct ns2_led_platform_data { + int num_leds; + struct ns2_led *leds; +}; + +#endif /* __MACH_LEDS_NS2_H */ diff --git a/include/linux/platform_data/leds-s3c24xx.h b/include/linux/platform_data/leds-s3c24xx.h new file mode 100644 index 000000000000..d8a7672519b6 --- /dev/null +++ b/include/linux/platform_data/leds-s3c24xx.h @@ -0,0 +1,28 @@ +/* arch/arm/mach-s3c2410/include/mach/leds-gpio.h + * + * Copyright (c) 2006 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks <ben@simtec.co.uk> + * + * S3C24XX - LEDs GPIO connector + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_LEDSGPIO_H +#define __ASM_ARCH_LEDSGPIO_H "leds-gpio.h" + +#define S3C24XX_LEDF_ACTLOW (1<<0) /* LED is on when GPIO low */ +#define S3C24XX_LEDF_TRISTATE (1<<1) /* tristate to turn off */ + +struct s3c24xx_led_platdata { + unsigned int gpio; + unsigned int flags; + + char *name; + char *def_trigger; +}; + +#endif /* __ASM_ARCH_LEDSGPIO_H */ diff --git a/include/linux/platform_data/max197.h b/include/linux/platform_data/max197.h new file mode 100644 index 000000000000..e2a41dd7690c --- /dev/null +++ b/include/linux/platform_data/max197.h @@ -0,0 +1,21 @@ +/* + * Maxim MAX197 A/D Converter Driver + * + * Copyright (c) 2012 Savoir-faire Linux Inc. + * Vivien Didelot <vivien.didelot@savoirfairelinux.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * For further information, see the Documentation/hwmon/max197 file. + */ + +/** + * struct max197_platform_data - MAX197 connectivity info + * @convert: Function used to start a conversion with control byte ctrl. + * It must return the raw data, or a negative error code. + */ +struct max197_platform_data { + int (*convert)(u8 ctrl); +}; diff --git a/include/linux/platform_data/max310x.h b/include/linux/platform_data/max310x.h new file mode 100644 index 000000000000..91648bf5fc5c --- /dev/null +++ b/include/linux/platform_data/max310x.h @@ -0,0 +1,67 @@ +/* + * Maxim (Dallas) MAX3107/8 serial driver + * + * Copyright (C) 2012 Alexander Shiyan <shc_work@mail.ru> + * + * Based on max3100.c, by Christian Pellegrin <chripell@evolware.org> + * Based on max3110.c, by Feng Tang <feng.tang@intel.com> + * Based on max3107.c, by Aavamobile + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef _MAX310X_H_ +#define _MAX310X_H_ + +/* + * Example board initialization data: + * + * static struct max310x_pdata max3107_pdata = { + * .driver_flags = MAX310X_EXT_CLK, + * .uart_flags[0] = MAX310X_ECHO_SUPRESS | MAX310X_AUTO_DIR_CTRL, + * .frequency = 3686400, + * .gpio_base = -1, + * }; + * + * static struct spi_board_info spi_device_max3107[] = { + * { + * .modalias = "max3107", + * .irq = IRQ_EINT3, + * .bus_num = 1, + * .chip_select = 1, + * .platform_data = &max3107_pdata, + * }, + * }; + */ + +#define MAX310X_MAX_UARTS 1 + +/* MAX310X platform data structure */ +struct max310x_pdata { + /* Flags global to driver */ + const u8 driver_flags:2; +#define MAX310X_EXT_CLK (0x00000001) /* External clock enable */ +#define MAX310X_AUTOSLEEP (0x00000002) /* Enable AutoSleep mode */ + /* Flags global to UART port */ + const u8 uart_flags[MAX310X_MAX_UARTS]; +#define MAX310X_LOOPBACK (0x00000001) /* Loopback mode enable */ +#define MAX310X_ECHO_SUPRESS (0x00000002) /* Enable echo supress */ +#define MAX310X_AUTO_DIR_CTRL (0x00000004) /* Enable Auto direction + * control (RS-485) + */ + /* Frequency (extrenal clock or crystal) */ + const int frequency; + /* GPIO base number (can be negative) */ + const int gpio_base; + /* Called during startup */ + void (*init)(void); + /* Called before finish */ + void (*exit)(void); + /* Suspend callback */ + void (*suspend)(int do_suspend); +}; + +#endif diff --git a/include/linux/platform_data/mfd-mcp-sa11x0.h b/include/linux/platform_data/mfd-mcp-sa11x0.h new file mode 100644 index 000000000000..4b2860ae3828 --- /dev/null +++ b/include/linux/platform_data/mfd-mcp-sa11x0.h @@ -0,0 +1,22 @@ +/* + * arch/arm/mach-sa1100/include/mach/mcp.h + * + * Copyright (C) 2005 Russell King. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __ASM_ARM_ARCH_MCP_H +#define __ASM_ARM_ARCH_MCP_H + +#include <linux/types.h> + +struct mcp_plat_data { + u32 mccr0; + u32 mccr1; + unsigned int sclk_rate; + void *codec_pdata; +}; + +#endif diff --git a/include/linux/platform_data/mipi-csis.h b/include/linux/platform_data/mipi-csis.h new file mode 100644 index 000000000000..c45b1e8d4c2e --- /dev/null +++ b/include/linux/platform_data/mipi-csis.h @@ -0,0 +1,43 @@ +/* + * Copyright (C) 2010-2011 Samsung Electronics Co., Ltd. + * + * S5P series MIPI CSI slave device support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __PLAT_SAMSUNG_MIPI_CSIS_H_ +#define __PLAT_SAMSUNG_MIPI_CSIS_H_ __FILE__ + +struct platform_device; + +/** + * struct s5p_platform_mipi_csis - platform data for S5P MIPI-CSIS driver + * @clk_rate: bus clock frequency + * @lanes: number of data lanes used + * @alignment: data alignment in bits + * @hs_settle: HS-RX settle time + * @fixed_phy_vdd: false to enable external D-PHY regulator management in the + * driver or true in case this regulator has no enable function + * @phy_enable: pointer to a callback controlling D-PHY enable/reset + */ +struct s5p_platform_mipi_csis { + unsigned long clk_rate; + u8 lanes; + u8 alignment; + u8 hs_settle; + bool fixed_phy_vdd; + int (*phy_enable)(struct platform_device *pdev, bool on); +}; + +/** + * s5p_csis_phy_enable - global MIPI-CSI receiver D-PHY control + * @pdev: MIPI-CSIS platform device + * @on: true to enable D-PHY and deassert its reset + * false to disable D-PHY + */ +int s5p_csis_phy_enable(struct platform_device *pdev, bool on); + +#endif /* __PLAT_SAMSUNG_MIPI_CSIS_H_ */ diff --git a/include/linux/platform_data/mmc-davinci.h b/include/linux/platform_data/mmc-davinci.h new file mode 100644 index 000000000000..5ba6b22ce338 --- /dev/null +++ b/include/linux/platform_data/mmc-davinci.h @@ -0,0 +1,39 @@ +/* + * Board-specific MMC configuration + */ + +#ifndef _DAVINCI_MMC_H +#define _DAVINCI_MMC_H + +#include <linux/types.h> +#include <linux/mmc/host.h> + +struct davinci_mmc_config { + /* get_cd()/get_wp() may sleep */ + int (*get_cd)(int module); + int (*get_ro)(int module); + + void (*set_power)(int module, bool on); + + /* wires == 0 is equivalent to wires == 4 (4-bit parallel) */ + u8 wires; + + u32 max_freq; + + /* any additional host capabilities: OR'd in to mmc->f_caps */ + u32 caps; + + /* Version of the MMC/SD controller */ + u8 version; + + /* Number of sg segments */ + u8 nr_sg; +}; +void davinci_setup_mmc(int module, struct davinci_mmc_config *config); + +enum { + MMC_CTLR_VERSION_1 = 0, /* DM644x and DM355 */ + MMC_CTLR_VERSION_2, /* DA830 */ +}; + +#endif diff --git a/include/linux/platform_data/mmc-esdhc-imx.h b/include/linux/platform_data/mmc-esdhc-imx.h new file mode 100644 index 000000000000..aaf97481f413 --- /dev/null +++ b/include/linux/platform_data/mmc-esdhc-imx.h @@ -0,0 +1,43 @@ +/* + * Copyright 2010 Wolfram Sang <w.sang@pengutronix.de> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; version 2 + * of the License. + */ + +#ifndef __ASM_ARCH_IMX_ESDHC_H +#define __ASM_ARCH_IMX_ESDHC_H + +enum wp_types { + ESDHC_WP_NONE, /* no WP, neither controller nor gpio */ + ESDHC_WP_CONTROLLER, /* mmc controller internal WP */ + ESDHC_WP_GPIO, /* external gpio pin for WP */ +}; + +enum cd_types { + ESDHC_CD_NONE, /* no CD, neither controller nor gpio */ + ESDHC_CD_CONTROLLER, /* mmc controller internal CD */ + ESDHC_CD_GPIO, /* external gpio pin for CD */ + ESDHC_CD_PERMANENT, /* no CD, card permanently wired to host */ +}; + +/** + * struct esdhc_platform_data - platform data for esdhc on i.MX + * + * ESDHC_WP(CD)_CONTROLLER type is not available on i.MX25/35. + * + * @wp_gpio: gpio for write_protect + * @cd_gpio: gpio for card_detect interrupt + * @wp_type: type of write_protect method (see wp_types enum above) + * @cd_type: type of card_detect method (see cd_types enum above) + */ + +struct esdhc_platform_data { + unsigned int wp_gpio; + unsigned int cd_gpio; + enum wp_types wp_type; + enum cd_types cd_type; +}; +#endif /* __ASM_ARCH_IMX_ESDHC_H */ diff --git a/include/linux/platform_data/mmc-msm_sdcc.h b/include/linux/platform_data/mmc-msm_sdcc.h new file mode 100644 index 000000000000..ffcd9e3a6a7e --- /dev/null +++ b/include/linux/platform_data/mmc-msm_sdcc.h @@ -0,0 +1,30 @@ +/* + * arch/arm/include/asm/mach/mmc.h + */ +#ifndef ASMARM_MACH_MMC_H +#define ASMARM_MACH_MMC_H + +#include <linux/mmc/host.h> +#include <linux/mmc/card.h> +#include <linux/mmc/sdio_func.h> + +struct msm_mmc_gpio { + unsigned no; + const char *name; +}; + +struct msm_mmc_gpio_data { + struct msm_mmc_gpio *gpio; + u8 size; +}; + +struct msm_mmc_platform_data { + unsigned int ocr_mask; /* available voltages */ + u32 (*translate_vdd)(struct device *, unsigned int); + unsigned int (*status)(struct device *); + int (*register_status_notify)(void (*callback)(int card_present, void *dev_id), void *dev_id); + struct msm_mmc_gpio_data *gpio_data; + void (*init_card)(struct mmc_card *card); +}; + +#endif diff --git a/include/linux/platform_data/mmc-mvsdio.h b/include/linux/platform_data/mmc-mvsdio.h new file mode 100644 index 000000000000..1190efedcb94 --- /dev/null +++ b/include/linux/platform_data/mmc-mvsdio.h @@ -0,0 +1,20 @@ +/* + * arch/arm/plat-orion/include/plat/mvsdio.h + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __MACH_MVSDIO_H +#define __MACH_MVSDIO_H + +#include <linux/mbus.h> + +struct mvsdio_platform_data { + unsigned int clock; + int gpio_card_detect; + int gpio_write_protect; +}; + +#endif diff --git a/include/linux/platform_data/mmc-mxcmmc.h b/include/linux/platform_data/mmc-mxcmmc.h new file mode 100644 index 000000000000..29115f405af9 --- /dev/null +++ b/include/linux/platform_data/mmc-mxcmmc.h @@ -0,0 +1,39 @@ +#ifndef ASMARM_ARCH_MMC_H +#define ASMARM_ARCH_MMC_H + +#include <linux/mmc/host.h> + +struct device; + +/* board specific SDHC data, optional. + * If not present, a writable card with 3,3V is assumed. + */ +struct imxmmc_platform_data { + /* Return values for the get_ro callback should be: + * 0 for a read/write card + * 1 for a read-only card + * -ENOSYS when not supported (equal to NULL callback) + * or a negative errno value when something bad happened + */ + int (*get_ro)(struct device *); + + /* board specific hook to (de)initialize the SD slot. + * The board code can call 'handler' on a card detection + * change giving data as argument. + */ + int (*init)(struct device *dev, irq_handler_t handler, void *data); + void (*exit)(struct device *dev, void *data); + + /* available voltages. If not given, assume + * MMC_VDD_32_33 | MMC_VDD_33_34 + */ + unsigned int ocr_avail; + + /* adjust slot voltage */ + void (*setpower)(struct device *, unsigned int vdd); + + /* enable card detect using DAT3 */ + int dat3_card_detect; +}; + +#endif diff --git a/include/linux/platform_data/mmc-pxamci.h b/include/linux/platform_data/mmc-pxamci.h new file mode 100644 index 000000000000..9eb515bb799d --- /dev/null +++ b/include/linux/platform_data/mmc-pxamci.h @@ -0,0 +1,28 @@ +#ifndef ASMARM_ARCH_MMC_H +#define ASMARM_ARCH_MMC_H + +#include <linux/mmc/host.h> +#include <linux/interrupt.h> + +struct device; +struct mmc_host; + +struct pxamci_platform_data { + unsigned int ocr_mask; /* available voltages */ + unsigned long detect_delay_ms; /* delay in millisecond before detecting cards after interrupt */ + int (*init)(struct device *, irq_handler_t , void *); + int (*get_ro)(struct device *); + void (*setpower)(struct device *, unsigned int); + void (*exit)(struct device *, void *); + int gpio_card_detect; /* gpio detecting card insertion */ + int gpio_card_ro; /* gpio detecting read only toggle */ + bool gpio_card_ro_invert; /* gpio ro is inverted */ + int gpio_power; /* gpio powering up MMC bus */ + bool gpio_power_invert; /* gpio power is inverted */ +}; + +extern void pxa_set_mci_info(struct pxamci_platform_data *info); +extern void pxa3xx_set_mci2_info(struct pxamci_platform_data *info); +extern void pxa3xx_set_mci3_info(struct pxamci_platform_data *info); + +#endif diff --git a/include/linux/platform_data/mmc-s3cmci.h b/include/linux/platform_data/mmc-s3cmci.h new file mode 100644 index 000000000000..c42d31711944 --- /dev/null +++ b/include/linux/platform_data/mmc-s3cmci.h @@ -0,0 +1,52 @@ +#ifndef _ARCH_MCI_H +#define _ARCH_MCI_H + +/** + * struct s3c24xx_mci_pdata - sd/mmc controller platform data + * @no_wprotect: Set this to indicate there is no write-protect switch. + * @no_detect: Set this if there is no detect switch. + * @wprotect_invert: Invert the default sense of the write protect switch. + * @detect_invert: Invert the default sense of the write protect switch. + * @use_dma: Set to allow the use of DMA. + * @gpio_detect: GPIO number for the card detect line. + * @gpio_wprotect: GPIO number for the write protect line. + * @ocr_avail: The mask of the available power states, non-zero to use. + * @set_power: Callback to control the power mode. + * + * The @gpio_detect is used for card detection when @no_wprotect is unset, + * and the default sense is that 0 returned from gpio_get_value() means + * that a card is inserted. If @detect_invert is set, then the value from + * gpio_get_value() is inverted, which makes 1 mean card inserted. + * + * The driver will use @gpio_wprotect to signal whether the card is write + * protected if @no_wprotect is not set. A 0 returned from gpio_get_value() + * means the card is read/write, and 1 means read-only. The @wprotect_invert + * will invert the value returned from gpio_get_value(). + * + * Card power is set by @ocr_availa, using MCC_VDD_ constants if it is set + * to a non-zero value, otherwise the default of 3.2-3.4V is used. + */ +struct s3c24xx_mci_pdata { + unsigned int no_wprotect:1; + unsigned int no_detect:1; + unsigned int wprotect_invert:1; + unsigned int detect_invert:1; /* set => detect active high */ + unsigned int use_dma:1; + + unsigned int gpio_detect; + unsigned int gpio_wprotect; + unsigned long ocr_avail; + void (*set_power)(unsigned char power_mode, + unsigned short vdd); +}; + +/** + * s3c24xx_mci_set_platdata - set platform data for mmc/sdi device + * @pdata: The platform data + * + * Copy the platform data supplied by @pdata so that this can be marked + * __initdata. + */ +extern void s3c24xx_mci_set_platdata(struct s3c24xx_mci_pdata *pdata); + +#endif /* _ARCH_NCI_H */ diff --git a/include/linux/platform_data/mmc-sdhci-tegra.h b/include/linux/platform_data/mmc-sdhci-tegra.h new file mode 100644 index 000000000000..8f8430697686 --- /dev/null +++ b/include/linux/platform_data/mmc-sdhci-tegra.h @@ -0,0 +1,28 @@ +/* + * Copyright (C) 2009 Palm, Inc. + * Author: Yvonne Yip <y@palm.com> + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ +#ifndef __PLATFORM_DATA_TEGRA_SDHCI_H +#define __PLATFORM_DATA_TEGRA_SDHCI_H + +#include <linux/mmc/host.h> + +struct tegra_sdhci_platform_data { + int cd_gpio; + int wp_gpio; + int power_gpio; + int is_8bit; + int pm_flags; +}; + +#endif diff --git a/include/linux/platform_data/mouse-pxa930_trkball.h b/include/linux/platform_data/mouse-pxa930_trkball.h new file mode 100644 index 000000000000..5e0789bc4729 --- /dev/null +++ b/include/linux/platform_data/mouse-pxa930_trkball.h @@ -0,0 +1,10 @@ +#ifndef __ASM_ARCH_PXA930_TRKBALL_H +#define __ASM_ARCH_PXA930_TRKBALL_H + +struct pxa930_trkball_platform_data { + int x_filter; + int y_filter; +}; + +#endif /* __ASM_ARCH_PXA930_TRKBALL_H */ + diff --git a/include/linux/platform_data/mtd-davinci-aemif.h b/include/linux/platform_data/mtd-davinci-aemif.h new file mode 100644 index 000000000000..05b293443097 --- /dev/null +++ b/include/linux/platform_data/mtd-davinci-aemif.h @@ -0,0 +1,36 @@ +/* + * TI DaVinci AEMIF support + * + * Copyright 2010 (C) Texas Instruments, Inc. http://www.ti.com/ + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ +#ifndef _MACH_DAVINCI_AEMIF_H +#define _MACH_DAVINCI_AEMIF_H + +#define NRCSR_OFFSET 0x00 +#define AWCCR_OFFSET 0x04 +#define A1CR_OFFSET 0x10 + +#define ACR_ASIZE_MASK 0x3 +#define ACR_EW_MASK BIT(30) +#define ACR_SS_MASK BIT(31) + +/* All timings in nanoseconds */ +struct davinci_aemif_timing { + u8 wsetup; + u8 wstrobe; + u8 whold; + + u8 rsetup; + u8 rstrobe; + u8 rhold; + + u8 ta; +}; + +int davinci_aemif_setup_timing(struct davinci_aemif_timing *t, + void __iomem *base, unsigned cs); +#endif diff --git a/include/linux/platform_data/mtd-davinci.h b/include/linux/platform_data/mtd-davinci.h new file mode 100644 index 000000000000..1cf555aef896 --- /dev/null +++ b/include/linux/platform_data/mtd-davinci.h @@ -0,0 +1,90 @@ +/* + * mach-davinci/nand.h + * + * Copyright © 2006 Texas Instruments. + * + * Ported to 2.6.23 Copyright © 2008 by + * Sander Huijsen <Shuijsen@optelecom-nkf.com> + * Troy Kisky <troy.kisky@boundarydevices.com> + * Dirk Behme <Dirk.Behme@gmail.com> + * + * -------------------------------------------------------------------------- + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __ARCH_ARM_DAVINCI_NAND_H +#define __ARCH_ARM_DAVINCI_NAND_H + +#include <linux/mtd/nand.h> + +#define NANDFCR_OFFSET 0x60 +#define NANDFSR_OFFSET 0x64 +#define NANDF1ECC_OFFSET 0x70 + +/* 4-bit ECC syndrome registers */ +#define NAND_4BIT_ECC_LOAD_OFFSET 0xbc +#define NAND_4BIT_ECC1_OFFSET 0xc0 +#define NAND_4BIT_ECC2_OFFSET 0xc4 +#define NAND_4BIT_ECC3_OFFSET 0xc8 +#define NAND_4BIT_ECC4_OFFSET 0xcc +#define NAND_ERR_ADD1_OFFSET 0xd0 +#define NAND_ERR_ADD2_OFFSET 0xd4 +#define NAND_ERR_ERRVAL1_OFFSET 0xd8 +#define NAND_ERR_ERRVAL2_OFFSET 0xdc + +/* NOTE: boards don't need to use these address bits + * for ALE/CLE unless they support booting from NAND. + * They're used unless platform data overrides them. + */ +#define MASK_ALE 0x08 +#define MASK_CLE 0x10 + +struct davinci_nand_pdata { /* platform_data */ + uint32_t mask_ale; + uint32_t mask_cle; + + /* for packages using two chipselects */ + uint32_t mask_chipsel; + + /* board's default static partition info */ + struct mtd_partition *parts; + unsigned nr_parts; + + /* none == NAND_ECC_NONE (strongly *not* advised!!) + * soft == NAND_ECC_SOFT + * else == NAND_ECC_HW, according to ecc_bits + * + * All DaVinci-family chips support 1-bit hardware ECC. + * Newer ones also support 4-bit ECC, but are awkward + * using it with large page chips. + */ + nand_ecc_modes_t ecc_mode; + u8 ecc_bits; + + /* e.g. NAND_BUSWIDTH_16 */ + unsigned options; + /* e.g. NAND_BBT_USE_FLASH */ + unsigned bbt_options; + + /* Main and mirror bbt descriptor overrides */ + struct nand_bbt_descr *bbt_td; + struct nand_bbt_descr *bbt_md; + + /* Access timings */ + struct davinci_aemif_timing *timing; +}; + +#endif /* __ARCH_ARM_DAVINCI_NAND_H */ diff --git a/include/linux/platform_data/mtd-mxc_nand.h b/include/linux/platform_data/mtd-mxc_nand.h new file mode 100644 index 000000000000..6bb96ef1600b --- /dev/null +++ b/include/linux/platform_data/mtd-mxc_nand.h @@ -0,0 +1,32 @@ +/* + * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2008 Sascha Hauer, kernel@pengutronix.de + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#ifndef __ASM_ARCH_NAND_H +#define __ASM_ARCH_NAND_H + +#include <linux/mtd/partitions.h> + +struct mxc_nand_platform_data { + unsigned int width; /* data bus width in bytes */ + unsigned int hw_ecc:1; /* 0 if suppress hardware ECC */ + unsigned int flash_bbt:1; /* set to 1 to use a flash based bbt */ + struct mtd_partition *parts; /* partition table */ + int nr_parts; /* size of parts */ +}; +#endif /* __ASM_ARCH_NAND_H */ diff --git a/include/linux/platform_data/mtd-nand-omap2.h b/include/linux/platform_data/mtd-nand-omap2.h new file mode 100644 index 000000000000..1a68c1e5fe53 --- /dev/null +++ b/include/linux/platform_data/mtd-nand-omap2.h @@ -0,0 +1,43 @@ +/* + * arch/arm/plat-omap/include/mach/nand.h + * + * Copyright (C) 2006 Micron Technology Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <plat/gpmc.h> +#include <linux/mtd/partitions.h> + +enum nand_io { + NAND_OMAP_PREFETCH_POLLED = 0, /* prefetch polled mode, default */ + NAND_OMAP_POLLED, /* polled mode, without prefetch */ + NAND_OMAP_PREFETCH_DMA, /* prefetch enabled sDMA mode */ + NAND_OMAP_PREFETCH_IRQ /* prefetch enabled irq mode */ +}; + +struct omap_nand_platform_data { + int cs; + struct mtd_partition *parts; + struct gpmc_timings *gpmc_t; + int nr_parts; + bool dev_ready; + enum nand_io xfer_type; + int devsize; + enum omap_ecc ecc_opt; + struct gpmc_nand_regs reg; +}; + +/* minimum size for IO mapping */ +#define NAND_IO_SIZE 4 + +#if defined(CONFIG_MTD_NAND_OMAP2) || defined(CONFIG_MTD_NAND_OMAP2_MODULE) +extern int gpmc_nand_init(struct omap_nand_platform_data *d); +#else +static inline int gpmc_nand_init(struct omap_nand_platform_data *d) +{ + return 0; +} +#endif diff --git a/include/linux/platform_data/mtd-nand-pxa3xx.h b/include/linux/platform_data/mtd-nand-pxa3xx.h new file mode 100644 index 000000000000..c42f39f20195 --- /dev/null +++ b/include/linux/platform_data/mtd-nand-pxa3xx.h @@ -0,0 +1,79 @@ +#ifndef __ASM_ARCH_PXA3XX_NAND_H +#define __ASM_ARCH_PXA3XX_NAND_H + +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> + +struct pxa3xx_nand_timing { + unsigned int tCH; /* Enable signal hold time */ + unsigned int tCS; /* Enable signal setup time */ + unsigned int tWH; /* ND_nWE high duration */ + unsigned int tWP; /* ND_nWE pulse time */ + unsigned int tRH; /* ND_nRE high duration */ + unsigned int tRP; /* ND_nRE pulse width */ + unsigned int tR; /* ND_nWE high to ND_nRE low for read */ + unsigned int tWHR; /* ND_nWE high to ND_nRE low for status read */ + unsigned int tAR; /* ND_ALE low to ND_nRE low delay */ +}; + +struct pxa3xx_nand_cmdset { + uint16_t read1; + uint16_t read2; + uint16_t program; + uint16_t read_status; + uint16_t read_id; + uint16_t erase; + uint16_t reset; + uint16_t lock; + uint16_t unlock; + uint16_t lock_status; +}; + +struct pxa3xx_nand_flash { + char *name; + uint32_t chip_id; + unsigned int page_per_block; /* Pages per block (PG_PER_BLK) */ + unsigned int page_size; /* Page size in bytes (PAGE_SZ) */ + unsigned int flash_width; /* Width of Flash memory (DWIDTH_M) */ + unsigned int dfc_width; /* Width of flash controller(DWIDTH_C) */ + unsigned int num_blocks; /* Number of physical blocks in Flash */ + + struct pxa3xx_nand_timing *timing; /* NAND Flash timing */ +}; + +/* + * Current pxa3xx_nand controller has two chip select which + * both be workable. + * + * Notice should be taken that: + * When you want to use this feature, you should not enable the + * keep configuration feature, for two chip select could be + * attached with different nand chip. The different page size + * and timing requirement make the keep configuration impossible. + */ + +/* The max num of chip select current support */ +#define NUM_CHIP_SELECT (2) +struct pxa3xx_nand_platform_data { + + /* the data flash bus is shared between the Static Memory + * Controller and the Data Flash Controller, the arbiter + * controls the ownership of the bus + */ + int enable_arbiter; + + /* allow platform code to keep OBM/bootloader defined NFC config */ + int keep_config; + + /* indicate how many chip selects will be used */ + int num_cs; + + const struct mtd_partition *parts[NUM_CHIP_SELECT]; + unsigned int nr_parts[NUM_CHIP_SELECT]; + + const struct pxa3xx_nand_flash * flash; + size_t num_flash; +}; + +extern void pxa3xx_set_nand_info(struct pxa3xx_nand_platform_data *info); +#endif /* __ASM_ARCH_PXA3XX_NAND_H */ diff --git a/include/linux/platform_data/mtd-nand-s3c2410.h b/include/linux/platform_data/mtd-nand-s3c2410.h new file mode 100644 index 000000000000..b64115fa93a4 --- /dev/null +++ b/include/linux/platform_data/mtd-nand-s3c2410.h @@ -0,0 +1,67 @@ +/* arch/arm/mach-s3c2410/include/mach/nand.h + * + * Copyright (c) 2004 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * S3C2410 - NAND device controller platform_device info + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/** + * struct s3c2410_nand_set - define a set of one or more nand chips + * @disable_ecc: Entirely disable ECC - Dangerous + * @flash_bbt: Openmoko u-boot can create a Bad Block Table + * Setting this flag will allow the kernel to + * look for it at boot time and also skip the NAND + * scan. + * @options: Default value to set into 'struct nand_chip' options. + * @nr_chips: Number of chips in this set + * @nr_partitions: Number of partitions pointed to by @partitions + * @name: Name of set (optional) + * @nr_map: Map for low-layer logical to physical chip numbers (option) + * @partitions: The mtd partition list + * + * define a set of one or more nand chips registered with an unique mtd. Also + * allows to pass flag to the underlying NAND layer. 'disable_ecc' will trigger + * a warning at boot time. + */ +struct s3c2410_nand_set { + unsigned int disable_ecc:1; + unsigned int flash_bbt:1; + + unsigned int options; + int nr_chips; + int nr_partitions; + char *name; + int *nr_map; + struct mtd_partition *partitions; + struct nand_ecclayout *ecc_layout; +}; + +struct s3c2410_platform_nand { + /* timing information for controller, all times in nanoseconds */ + + int tacls; /* time for active CLE/ALE to nWE/nOE */ + int twrph0; /* active time for nWE/nOE */ + int twrph1; /* time for release CLE/ALE from nWE/nOE inactive */ + + unsigned int ignore_unset_ecc:1; + + int nr_sets; + struct s3c2410_nand_set *sets; + + void (*select_chip)(struct s3c2410_nand_set *, + int chip); +}; + +/** + * s3c_nand_set_platdata() - register NAND platform data. + * @nand: The NAND platform data to register with s3c_device_nand. + * + * This function copies the given NAND platform data, @nand and registers + * it with the s3c_device_nand. This allows @nand to be __initdata. +*/ +extern void s3c_nand_set_platdata(struct s3c2410_platform_nand *nand); diff --git a/include/linux/platform_data/mtd-nomadik-nand.h b/include/linux/platform_data/mtd-nomadik-nand.h new file mode 100644 index 000000000000..c3c8254c22a5 --- /dev/null +++ b/include/linux/platform_data/mtd-nomadik-nand.h @@ -0,0 +1,16 @@ +#ifndef __ASM_ARCH_NAND_H +#define __ASM_ARCH_NAND_H + +struct nomadik_nand_platform_data { + struct mtd_partition *parts; + int nparts; + int options; + int (*init) (void); + int (*exit) (void); +}; + +#define NAND_IO_DATA 0x40000000 +#define NAND_IO_CMD 0x40800000 +#define NAND_IO_ADDR 0x41000000 + +#endif /* __ASM_ARCH_NAND_H */ diff --git a/include/linux/platform_data/mtd-onenand-omap2.h b/include/linux/platform_data/mtd-onenand-omap2.h new file mode 100644 index 000000000000..2858667d2e4f --- /dev/null +++ b/include/linux/platform_data/mtd-onenand-omap2.h @@ -0,0 +1,53 @@ +/* + * arch/arm/plat-omap/include/mach/onenand.h + * + * Copyright (C) 2006 Nokia Corporation + * Author: Juha Yrjola + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> + +#define ONENAND_SYNC_READ (1 << 0) +#define ONENAND_SYNC_READWRITE (1 << 1) + +struct onenand_freq_info { + u16 maf_id; + u16 dev_id; + u16 ver_id; +}; + +struct omap_onenand_platform_data { + int cs; + int gpio_irq; + struct mtd_partition *parts; + int nr_parts; + int (*onenand_setup)(void __iomem *, int *freq_ptr); + int (*get_freq)(const struct onenand_freq_info *freq_info, + bool *clk_dep); + int dma_channel; + u8 flags; + u8 regulator_can_sleep; + u8 skip_initial_unlocking; +}; + +#define ONENAND_MAX_PARTITIONS 8 + +#if defined(CONFIG_MTD_ONENAND_OMAP2) || \ + defined(CONFIG_MTD_ONENAND_OMAP2_MODULE) + +extern void gpmc_onenand_init(struct omap_onenand_platform_data *d); + +#else + +#define board_onenand_data NULL + +static inline void gpmc_onenand_init(struct omap_onenand_platform_data *d) +{ +} + +#endif diff --git a/include/linux/platform_data/mtd-orion_nand.h b/include/linux/platform_data/mtd-orion_nand.h new file mode 100644 index 000000000000..9f3c180834d1 --- /dev/null +++ b/include/linux/platform_data/mtd-orion_nand.h @@ -0,0 +1,26 @@ +/* + * arch/arm/plat-orion/include/plat/orion_nand.h + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __PLAT_ORION_NAND_H +#define __PLAT_ORION_NAND_H + +/* + * Device bus NAND private data + */ +struct orion_nand_data { + struct mtd_partition *parts; + int (*dev_ready)(struct mtd_info *mtd); + u32 nr_parts; + u8 ale; /* address line number connected to ALE */ + u8 cle; /* address line number connected to CLE */ + u8 width; /* buswidth */ + u8 chip_delay; +}; + + +#endif diff --git a/include/linux/platform_data/omap1_bl.h b/include/linux/platform_data/omap1_bl.h new file mode 100644 index 000000000000..881a8e92d605 --- /dev/null +++ b/include/linux/platform_data/omap1_bl.h @@ -0,0 +1,11 @@ +#ifndef __OMAP1_BL_H__ +#define __OMAP1_BL_H__ + +#include <linux/device.h> + +struct omap_backlight_config { + int default_intensity; + int (*set_power)(struct device *dev, int state); +}; + +#endif diff --git a/include/linux/platform_data/pcmcia-pxa2xx_viper.h b/include/linux/platform_data/pcmcia-pxa2xx_viper.h new file mode 100644 index 000000000000..d428be4db44c --- /dev/null +++ b/include/linux/platform_data/pcmcia-pxa2xx_viper.h @@ -0,0 +1,11 @@ +#ifndef __ARCOM_PCMCIA_H +#define __ARCOM_PCMCIA_H + +struct arcom_pcmcia_pdata { + int cd_gpio; + int rdy_gpio; + int pwr_gpio; + void (*reset)(int state); +}; + +#endif diff --git a/include/linux/platform_data/pinctrl-coh901.h b/include/linux/platform_data/pinctrl-coh901.h new file mode 100644 index 000000000000..30dea251b835 --- /dev/null +++ b/include/linux/platform_data/pinctrl-coh901.h @@ -0,0 +1,26 @@ +/* + * Copyright (C) 2007-2012 ST-Ericsson AB + * License terms: GNU General Public License (GPL) version 2 + * GPIO block resgister definitions and inline macros for + * U300 GPIO COH 901 335 or COH 901 571/3 + * Author: Linus Walleij <linus.walleij@stericsson.com> + */ + +#ifndef __MACH_U300_GPIO_U300_H +#define __MACH_U300_GPIO_U300_H + +/** + * struct u300_gpio_platform - U300 GPIO platform data + * @ports: number of GPIO block ports + * @gpio_base: first GPIO number for this block (use a free range) + * @gpio_irq_base: first GPIO IRQ number for this block (use a free range) + * @pinctrl_device: pin control device to spawn as child + */ +struct u300_gpio_platform { + u8 ports; + int gpio_base; + int gpio_irq_base; + struct platform_device *pinctrl_device; +}; + +#endif /* __MACH_U300_GPIO_U300_H */ diff --git a/include/linux/platform_data/remoteproc-omap.h b/include/linux/platform_data/remoteproc-omap.h new file mode 100644 index 000000000000..b10eac89e2e9 --- /dev/null +++ b/include/linux/platform_data/remoteproc-omap.h @@ -0,0 +1,57 @@ +/* + * Remote Processor - omap-specific bits + * + * Copyright (C) 2011 Texas Instruments, Inc. + * Copyright (C) 2011 Google, Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef _PLAT_REMOTEPROC_H +#define _PLAT_REMOTEPROC_H + +struct rproc_ops; +struct platform_device; + +/* + * struct omap_rproc_pdata - omap remoteproc's platform data + * @name: the remoteproc's name + * @oh_name: omap hwmod device + * @oh_name_opt: optional, secondary omap hwmod device + * @firmware: name of firmware file to load + * @mbox_name: name of omap mailbox device to use with this rproc + * @ops: start/stop rproc handlers + * @device_enable: omap-specific handler for enabling a device + * @device_shutdown: omap-specific handler for shutting down a device + */ +struct omap_rproc_pdata { + const char *name; + const char *oh_name; + const char *oh_name_opt; + const char *firmware; + const char *mbox_name; + const struct rproc_ops *ops; + int (*device_enable) (struct platform_device *pdev); + int (*device_shutdown) (struct platform_device *pdev); +}; + +#if defined(CONFIG_OMAP_REMOTEPROC) || defined(CONFIG_OMAP_REMOTEPROC_MODULE) + +void __init omap_rproc_reserve_cma(void); + +#else + +void __init omap_rproc_reserve_cma(void) +{ +} + +#endif + +#endif /* _PLAT_REMOTEPROC_H */ diff --git a/include/linux/platform_data/sc18is602.h b/include/linux/platform_data/sc18is602.h new file mode 100644 index 000000000000..997b06634152 --- /dev/null +++ b/include/linux/platform_data/sc18is602.h @@ -0,0 +1,19 @@ +/* + * Platform data for NXP SC18IS602/603 + * + * Copyright (C) 2012 Guenter Roeck <linux@roeck-us.net> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * For further information, see the Documentation/spi/sc18is602 file. + */ + +/** + * struct sc18is602_platform_data - sc18is602 info + * @clock_frequency SC18IS603 oscillator frequency + */ +struct sc18is602_platform_data { + u32 clock_frequency; +}; diff --git a/include/linux/platform_data/sccnxp.h b/include/linux/platform_data/sccnxp.h new file mode 100644 index 000000000000..7311ccd3217f --- /dev/null +++ b/include/linux/platform_data/sccnxp.h @@ -0,0 +1,93 @@ +/* + * NXP (Philips) SCC+++(SCN+++) serial driver + * + * Copyright (C) 2012 Alexander Shiyan <shc_work@mail.ru> + * + * Based on sc26xx.c, by Thomas Bogendörfer (tsbogend@alpha.franken.de) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef __SCCNXP_H +#define __SCCNXP_H + +#define SCCNXP_MAX_UARTS 2 + +/* Output lines */ +#define LINE_OP0 1 +#define LINE_OP1 2 +#define LINE_OP2 3 +#define LINE_OP3 4 +#define LINE_OP4 5 +#define LINE_OP5 6 +#define LINE_OP6 7 +#define LINE_OP7 8 + +/* Input lines */ +#define LINE_IP0 9 +#define LINE_IP1 10 +#define LINE_IP2 11 +#define LINE_IP3 12 +#define LINE_IP4 13 +#define LINE_IP5 14 +#define LINE_IP6 15 + +/* Signals */ +#define DTR_OP 0 /* DTR */ +#define RTS_OP 4 /* RTS */ +#define DSR_IP 8 /* DSR */ +#define CTS_IP 12 /* CTS */ +#define DCD_IP 16 /* DCD */ +#define RNG_IP 20 /* RNG */ + +#define DIR_OP 24 /* Special signal for control RS-485. + * Goes high when transmit, + * then goes low. + */ + +/* Routing control signal 'sig' to line 'line' */ +#define MCTRL_SIG(sig, line) ((line) << (sig)) + +/* + * Example board initialization data: + * + * static struct resource sc2892_resources[] = { + * DEFINE_RES_MEM(UART_PHYS_START, 0x10), + * DEFINE_RES_IRQ(IRQ_EXT2), + * }; + * + * static struct sccnxp_pdata sc2892_info = { + * .frequency = 3686400, + * .mctrl_cfg[0] = MCTRL_SIG(DIR_OP, LINE_OP0), + * .mctrl_cfg[1] = MCTRL_SIG(DIR_OP, LINE_OP1), + * }; + * + * static struct platform_device sc2892 = { + * .name = "sc2892", + * .id = -1, + * .resource = sc2892_resources, + * .num_resources = ARRAY_SIZE(sc2892_resources), + * .dev = { + * .platform_data = &sc2892_info, + * }, + * }; + */ + +/* SCCNXP platform data structure */ +struct sccnxp_pdata { + /* Frequency (extrenal clock or crystal) */ + int frequency; + /* Shift for A0 line */ + const u8 reg_shift; + /* Modem control lines configuration */ + const u32 mctrl_cfg[SCCNXP_MAX_UARTS]; + /* Called during startup */ + void (*init)(void); + /* Called before finish */ + void (*exit)(void); +}; + +#endif diff --git a/include/linux/platform_data/serial-imx.h b/include/linux/platform_data/serial-imx.h new file mode 100644 index 000000000000..4adec9b154dd --- /dev/null +++ b/include/linux/platform_data/serial-imx.h @@ -0,0 +1,35 @@ +/* + * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301, USA. + */ + +#ifndef ASMARM_ARCH_UART_H +#define ASMARM_ARCH_UART_H + +#define IMXUART_HAVE_RTSCTS (1<<0) +#define IMXUART_IRDA (1<<1) + +struct imxuart_platform_data { + int (*init)(struct platform_device *pdev); + void (*exit)(struct platform_device *pdev); + unsigned int flags; + void (*irda_enable)(int enable); + unsigned int irda_inv_rx:1; + unsigned int irda_inv_tx:1; + unsigned short transceiver_delay; +}; + +#endif diff --git a/include/linux/platform_data/sht15.h b/include/linux/platform_data/sht15.h new file mode 100644 index 000000000000..33e0fd27225e --- /dev/null +++ b/include/linux/platform_data/sht15.h @@ -0,0 +1,33 @@ +/* + * sht15.h - support for the SHT15 Temperature and Humidity Sensor + * + * Copyright (c) 2009 Jonathan Cameron + * + * Copyright (c) 2007 Wouter Horre + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * For further information, see the Documentation/hwmon/sht15 file. + */ + +/** + * struct sht15_platform_data - sht15 connectivity info + * @gpio_data: no. of gpio to which bidirectional data line is + * connected. + * @gpio_sck: no. of gpio to which the data clock is connected. + * @supply_mv: supply voltage in mv. Overridden by regulator if + * available. + * @checksum: flag to indicate the checksum should be validated. + * @no_otp_reload: flag to indicate no reload from OTP. + * @low_resolution: flag to indicate the temp/humidity resolution to use. + */ +struct sht15_platform_data { + int gpio_data; + int gpio_sck; + int supply_mv; + bool checksum; + bool no_otp_reload; + bool low_resolution; +}; diff --git a/include/linux/platform_data/spi-davinci.h b/include/linux/platform_data/spi-davinci.h new file mode 100644 index 000000000000..7af305b37868 --- /dev/null +++ b/include/linux/platform_data/spi-davinci.h @@ -0,0 +1,89 @@ +/* + * Copyright 2009 Texas Instruments. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __ARCH_ARM_DAVINCI_SPI_H +#define __ARCH_ARM_DAVINCI_SPI_H + +#include <mach/edma.h> + +#define SPI_INTERN_CS 0xFF + +enum { + SPI_VERSION_1, /* For DM355/DM365/DM6467 */ + SPI_VERSION_2, /* For DA8xx */ +}; + +/** + * davinci_spi_platform_data - Platform data for SPI master device on DaVinci + * + * @version: version of the SPI IP. Different DaVinci devices have slightly + * varying versions of the same IP. + * @num_chipselect: number of chipselects supported by this SPI master + * @intr_line: interrupt line used to connect the SPI IP to the ARM interrupt + * controller withn the SoC. Possible values are 0 and 1. + * @chip_sel: list of GPIOs which can act as chip-selects for the SPI. + * SPI_INTERN_CS denotes internal SPI chip-select. Not necessary + * to populate if all chip-selects are internal. + * @cshold_bug: set this to true if the SPI controller on your chip requires + * a write to CSHOLD bit in between transfers (like in DM355). + * @dma_event_q: DMA event queue to use if SPI_IO_TYPE_DMA is used for any + * device on the bus. + */ +struct davinci_spi_platform_data { + u8 version; + u8 num_chipselect; + u8 intr_line; + u8 *chip_sel; + bool cshold_bug; + enum dma_event_q dma_event_q; +}; + +/** + * davinci_spi_config - Per-chip-select configuration for SPI slave devices + * + * @wdelay: amount of delay between transmissions. Measured in number of + * SPI module clocks. + * @odd_parity: polarity of parity flag at the end of transmit data stream. + * 0 - odd parity, 1 - even parity. + * @parity_enable: enable transmission of parity at end of each transmit + * data stream. + * @io_type: type of IO transfer. Choose between polled, interrupt and DMA. + * @timer_disable: disable chip-select timers (setup and hold) + * @c2tdelay: chip-select setup time. Measured in number of SPI module clocks. + * @t2cdelay: chip-select hold time. Measured in number of SPI module clocks. + * @t2edelay: transmit data finished to SPI ENAn pin inactive time. Measured + * in number of SPI clocks. + * @c2edelay: chip-select active to SPI ENAn signal active time. Measured in + * number of SPI clocks. + */ +struct davinci_spi_config { + u8 wdelay; + u8 odd_parity; + u8 parity_enable; +#define SPI_IO_TYPE_INTR 0 +#define SPI_IO_TYPE_POLL 1 +#define SPI_IO_TYPE_DMA 2 + u8 io_type; + u8 timer_disable; + u8 c2tdelay; + u8 t2cdelay; + u8 t2edelay; + u8 c2edelay; +}; + +#endif /* __ARCH_ARM_DAVINCI_SPI_H */ diff --git a/include/linux/platform_data/spi-ep93xx.h b/include/linux/platform_data/spi-ep93xx.h new file mode 100644 index 000000000000..9bb63ac13f04 --- /dev/null +++ b/include/linux/platform_data/spi-ep93xx.h @@ -0,0 +1,29 @@ +#ifndef __ASM_MACH_EP93XX_SPI_H +#define __ASM_MACH_EP93XX_SPI_H + +struct spi_device; + +/** + * struct ep93xx_spi_info - EP93xx specific SPI descriptor + * @num_chipselect: number of chip selects on this board, must be + * at least one + * @use_dma: use DMA for the transfers + */ +struct ep93xx_spi_info { + int num_chipselect; + bool use_dma; +}; + +/** + * struct ep93xx_spi_chip_ops - operation callbacks for SPI slave device + * @setup: setup the chip select mechanism + * @cleanup: cleanup the chip select mechanism + * @cs_control: control the device chip select + */ +struct ep93xx_spi_chip_ops { + int (*setup)(struct spi_device *spi); + void (*cleanup)(struct spi_device *spi); + void (*cs_control)(struct spi_device *spi, int value); +}; + +#endif /* __ASM_MACH_EP93XX_SPI_H */ diff --git a/include/linux/platform_data/spi-imx.h b/include/linux/platform_data/spi-imx.h new file mode 100644 index 000000000000..08be445e8eb8 --- /dev/null +++ b/include/linux/platform_data/spi-imx.h @@ -0,0 +1,27 @@ + +#ifndef __MACH_SPI_H_ +#define __MACH_SPI_H_ + +/* + * struct spi_imx_master - device.platform_data for SPI controller devices. + * @chipselect: Array of chipselects for this master. Numbers >= 0 mean gpio + * pins, numbers < 0 mean internal CSPI chipselects according + * to MXC_SPI_CS(). Normally you want to use gpio based chip + * selects as the CSPI module tries to be intelligent about + * when to assert the chipselect: The CSPI module deasserts the + * chipselect once it runs out of input data. The other problem + * is that it is not possible to mix between high active and low + * active chipselects on one single bus using the internal + * chipselects. Unfortunately Freescale decided to put some + * chipselects on dedicated pins which are not usable as gpios, + * so we have to support the internal chipselects. + * @num_chipselect: ARRAY_SIZE(chipselect) + */ +struct spi_imx_master { + int *chipselect; + int num_chipselect; +}; + +#define MXC_SPI_CS(no) ((no) - 32) + +#endif /* __MACH_SPI_H_*/ diff --git a/include/linux/platform_data/spi-nuc900.h b/include/linux/platform_data/spi-nuc900.h new file mode 100644 index 000000000000..2c4e0c128501 --- /dev/null +++ b/include/linux/platform_data/spi-nuc900.h @@ -0,0 +1,35 @@ +/* + * arch/arm/mach-w90x900/include/mach/nuc900_spi.h + * + * Copyright (c) 2009 Nuvoton technology corporation. + * + * Wan ZongShun <mcuos.com@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation;version 2 of the License. + * + */ + +#ifndef __ASM_ARCH_SPI_H +#define __ASM_ARCH_SPI_H + +extern void mfp_set_groupg(struct device *dev, const char *subname); + +struct nuc900_spi_info { + unsigned int num_cs; + unsigned int lsb; + unsigned int txneg; + unsigned int rxneg; + unsigned int divider; + unsigned int sleep; + unsigned int txnum; + unsigned int txbitlen; + int bus_num; +}; + +struct nuc900_spi_chip { + unsigned char bits_per_word; +}; + +#endif /* __ASM_ARCH_SPI_H */ diff --git a/include/linux/platform_data/spi-omap2-mcspi.h b/include/linux/platform_data/spi-omap2-mcspi.h new file mode 100644 index 000000000000..a357eb26bd25 --- /dev/null +++ b/include/linux/platform_data/spi-omap2-mcspi.h @@ -0,0 +1,23 @@ +#ifndef _OMAP2_MCSPI_H +#define _OMAP2_MCSPI_H + +#define OMAP2_MCSPI_REV 0 +#define OMAP3_MCSPI_REV 1 +#define OMAP4_MCSPI_REV 2 + +#define OMAP4_MCSPI_REG_OFFSET 0x100 + +struct omap2_mcspi_platform_config { + unsigned short num_cs; + unsigned int regs_offset; +}; + +struct omap2_mcspi_dev_attr { + unsigned short num_chipselect; +}; + +struct omap2_mcspi_device_config { + unsigned turbo_mode:1; +}; + +#endif diff --git a/include/linux/platform_data/spi-s3c64xx.h b/include/linux/platform_data/spi-s3c64xx.h new file mode 100644 index 000000000000..ceba18d23a5a --- /dev/null +++ b/include/linux/platform_data/spi-s3c64xx.h @@ -0,0 +1,68 @@ +/* linux/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h + * + * Copyright (C) 2009 Samsung Electronics Ltd. + * Jaswinder Singh <jassi.brar@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __S3C64XX_PLAT_SPI_H +#define __S3C64XX_PLAT_SPI_H + +struct platform_device; + +/** + * struct s3c64xx_spi_csinfo - ChipSelect description + * @fb_delay: Slave specific feedback delay. + * Refer to FB_CLK_SEL register definition in SPI chapter. + * @line: Custom 'identity' of the CS line. + * + * This is per SPI-Slave Chipselect information. + * Allocate and initialize one in machine init code and make the + * spi_board_info.controller_data point to it. + */ +struct s3c64xx_spi_csinfo { + u8 fb_delay; + unsigned line; +}; + +/** + * struct s3c64xx_spi_info - SPI Controller defining structure + * @src_clk_nr: Clock source index for the CLK_CFG[SPI_CLKSEL] field. + * @num_cs: Number of CS this controller emulates. + * @cfg_gpio: Configure pins for this SPI controller. + */ +struct s3c64xx_spi_info { + int src_clk_nr; + int num_cs; + int (*cfg_gpio)(void); +}; + +/** + * s3c64xx_spi_set_platdata - SPI Controller configure callback by the board + * initialization code. + * @cfg_gpio: Pointer to gpio setup function. + * @src_clk_nr: Clock the SPI controller is to use to generate SPI clocks. + * @num_cs: Number of elements in the 'cs' array. + * + * Call this from machine init code for each SPI Controller that + * has some chips attached to it. + */ +extern void s3c64xx_spi0_set_platdata(int (*cfg_gpio)(void), int src_clk_nr, + int num_cs); +extern void s3c64xx_spi1_set_platdata(int (*cfg_gpio)(void), int src_clk_nr, + int num_cs); +extern void s3c64xx_spi2_set_platdata(int (*cfg_gpio)(void), int src_clk_nr, + int num_cs); + +/* defined by architecture to configure gpio */ +extern int s3c64xx_spi0_cfg_gpio(void); +extern int s3c64xx_spi1_cfg_gpio(void); +extern int s3c64xx_spi2_cfg_gpio(void); + +extern struct s3c64xx_spi_info s3c64xx_spi0_pdata; +extern struct s3c64xx_spi_info s3c64xx_spi1_pdata; +extern struct s3c64xx_spi_info s3c64xx_spi2_pdata; +#endif /* __S3C64XX_PLAT_SPI_H */ diff --git a/include/linux/platform_data/touchscreen-s3c2410.h b/include/linux/platform_data/touchscreen-s3c2410.h new file mode 100644 index 000000000000..26fdb22e0fc2 --- /dev/null +++ b/include/linux/platform_data/touchscreen-s3c2410.h @@ -0,0 +1,25 @@ +/* arch/arm/plat-samsung/include/plat/ts.h + * + * Copyright (c) 2005 Arnaud Patard <arnaud.patard@rtp-net.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARM_TS_H +#define __ASM_ARM_TS_H + +struct s3c2410_ts_mach_info { + int delay; + int presc; + int oversampling_shift; + void (*cfg_gpio)(struct platform_device *dev); +}; + +extern void s3c24xx_ts_set_platdata(struct s3c2410_ts_mach_info *); + +/* defined by architecture to configure gpio */ +extern void s3c24xx_ts_cfg_gpio(struct platform_device *dev); + +#endif /* __ASM_ARM_TS_H */ diff --git a/include/linux/platform_data/usb-davinci.h b/include/linux/platform_data/usb-davinci.h new file mode 100644 index 000000000000..e0bc4abe69c2 --- /dev/null +++ b/include/linux/platform_data/usb-davinci.h @@ -0,0 +1,59 @@ +/* + * USB related definitions + * + * Copyright (C) 2009 MontaVista Software, Inc. <source@mvista.com> + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#ifndef __ASM_ARCH_USB_H +#define __ASM_ARCH_USB_H + +/* DA8xx CFGCHIP2 (USB 2.0 PHY Control) register bits */ +#define CFGCHIP2_PHYCLKGD (1 << 17) +#define CFGCHIP2_VBUSSENSE (1 << 16) +#define CFGCHIP2_RESET (1 << 15) +#define CFGCHIP2_OTGMODE (3 << 13) +#define CFGCHIP2_NO_OVERRIDE (0 << 13) +#define CFGCHIP2_FORCE_HOST (1 << 13) +#define CFGCHIP2_FORCE_DEVICE (2 << 13) +#define CFGCHIP2_FORCE_HOST_VBUS_LOW (3 << 13) +#define CFGCHIP2_USB1PHYCLKMUX (1 << 12) +#define CFGCHIP2_USB2PHYCLKMUX (1 << 11) +#define CFGCHIP2_PHYPWRDN (1 << 10) +#define CFGCHIP2_OTGPWRDN (1 << 9) +#define CFGCHIP2_DATPOL (1 << 8) +#define CFGCHIP2_USB1SUSPENDM (1 << 7) +#define CFGCHIP2_PHY_PLLON (1 << 6) /* override PLL suspend */ +#define CFGCHIP2_SESENDEN (1 << 5) /* Vsess_end comparator */ +#define CFGCHIP2_VBDTCTEN (1 << 4) /* Vbus comparator */ +#define CFGCHIP2_REFFREQ (0xf << 0) +#define CFGCHIP2_REFFREQ_12MHZ (1 << 0) +#define CFGCHIP2_REFFREQ_24MHZ (2 << 0) +#define CFGCHIP2_REFFREQ_48MHZ (3 << 0) + +struct da8xx_ohci_root_hub; + +typedef void (*da8xx_ocic_handler_t)(struct da8xx_ohci_root_hub *hub, + unsigned port); + +/* Passed as the platform data to the OHCI driver */ +struct da8xx_ohci_root_hub { + /* Switch the port power on/off */ + int (*set_power)(unsigned port, int on); + /* Read the port power status */ + int (*get_power)(unsigned port); + /* Read the port over-current indicator */ + int (*get_oci)(unsigned port); + /* Over-current indicator change notification (pass NULL to disable) */ + int (*ocic_notify)(da8xx_ocic_handler_t handler); + + /* Time from power on to power good (in 2 ms units) */ + u8 potpgt; +}; + +void davinci_setup_usb(unsigned mA, unsigned potpgt_ms); + +#endif /* ifndef __ASM_ARCH_USB_H */ diff --git a/include/linux/platform_data/usb-ehci-mxc.h b/include/linux/platform_data/usb-ehci-mxc.h new file mode 100644 index 000000000000..7eb9d1329671 --- /dev/null +++ b/include/linux/platform_data/usb-ehci-mxc.h @@ -0,0 +1,59 @@ +#ifndef __INCLUDE_ASM_ARCH_MXC_EHCI_H +#define __INCLUDE_ASM_ARCH_MXC_EHCI_H + +/* values for portsc field */ +#define MXC_EHCI_PHY_LOW_POWER_SUSPEND (1 << 23) +#define MXC_EHCI_FORCE_FS (1 << 24) +#define MXC_EHCI_UTMI_8BIT (0 << 28) +#define MXC_EHCI_UTMI_16BIT (1 << 28) +#define MXC_EHCI_SERIAL (1 << 29) +#define MXC_EHCI_MODE_UTMI (0 << 30) +#define MXC_EHCI_MODE_PHILIPS (1 << 30) +#define MXC_EHCI_MODE_ULPI (2 << 30) +#define MXC_EHCI_MODE_SERIAL (3 << 30) + +/* values for flags field */ +#define MXC_EHCI_INTERFACE_DIFF_UNI (0 << 0) +#define MXC_EHCI_INTERFACE_DIFF_BI (1 << 0) +#define MXC_EHCI_INTERFACE_SINGLE_UNI (2 << 0) +#define MXC_EHCI_INTERFACE_SINGLE_BI (3 << 0) +#define MXC_EHCI_INTERFACE_MASK (0xf) + +#define MXC_EHCI_POWER_PINS_ENABLED (1 << 5) +#define MXC_EHCI_PWR_PIN_ACTIVE_HIGH (1 << 6) +#define MXC_EHCI_OC_PIN_ACTIVE_LOW (1 << 7) +#define MXC_EHCI_TTL_ENABLED (1 << 8) + +#define MXC_EHCI_INTERNAL_PHY (1 << 9) +#define MXC_EHCI_IPPUE_DOWN (1 << 10) +#define MXC_EHCI_IPPUE_UP (1 << 11) +#define MXC_EHCI_WAKEUP_ENABLED (1 << 12) +#define MXC_EHCI_ITC_NO_THRESHOLD (1 << 13) + +#define MXC_USBCTRL_OFFSET 0 +#define MXC_USB_PHY_CTR_FUNC_OFFSET 0x8 +#define MXC_USB_PHY_CTR_FUNC2_OFFSET 0xc +#define MXC_USBH2CTRL_OFFSET 0x14 + +#define MX5_USBOTHER_REGS_OFFSET 0x800 + +/* USB_PHY_CTRL_FUNC2*/ +#define MX5_USB_UTMI_PHYCTRL1_PLLDIV_MASK 0x3 +#define MX5_USB_UTMI_PHYCTRL1_PLLDIV_SHIFT 0 + +struct mxc_usbh_platform_data { + int (*init)(struct platform_device *pdev); + int (*exit)(struct platform_device *pdev); + + unsigned int portsc; + struct usb_phy *otg; +}; + +int mx51_initialize_usb_hw(int port, unsigned int flags); +int mx25_initialize_usb_hw(int port, unsigned int flags); +int mx31_initialize_usb_hw(int port, unsigned int flags); +int mx35_initialize_usb_hw(int port, unsigned int flags); +int mx27_initialize_usb_hw(int port, unsigned int flags); + +#endif /* __INCLUDE_ASM_ARCH_MXC_EHCI_H */ + diff --git a/include/linux/platform_data/usb-ehci-orion.h b/include/linux/platform_data/usb-ehci-orion.h new file mode 100644 index 000000000000..6fc78e430420 --- /dev/null +++ b/include/linux/platform_data/usb-ehci-orion.h @@ -0,0 +1,26 @@ +/* + * arch/arm/plat-orion/include/plat/ehci-orion.h + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __PLAT_EHCI_ORION_H +#define __PLAT_EHCI_ORION_H + +#include <linux/mbus.h> + +enum orion_ehci_phy_ver { + EHCI_PHY_ORION, + EHCI_PHY_DD, + EHCI_PHY_KW, + EHCI_PHY_NA, +}; + +struct orion_ehci_data { + enum orion_ehci_phy_ver phy_version; +}; + + +#endif diff --git a/include/linux/platform_data/usb-ehci-s5p.h b/include/linux/platform_data/usb-ehci-s5p.h new file mode 100644 index 000000000000..5f28cae18582 --- /dev/null +++ b/include/linux/platform_data/usb-ehci-s5p.h @@ -0,0 +1,21 @@ +/* + * Copyright (C) 2011 Samsung Electronics Co.Ltd + * Author: Joonyoung Shim <jy0922.shim@samsung.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#ifndef __PLAT_SAMSUNG_EHCI_H +#define __PLAT_SAMSUNG_EHCI_H __FILE__ + +struct s5p_ehci_platdata { + int (*phy_init)(struct platform_device *pdev, int type); + int (*phy_exit)(struct platform_device *pdev, int type); +}; + +extern void s5p_ehci_set_platdata(struct s5p_ehci_platdata *pd); + +#endif /* __PLAT_SAMSUNG_EHCI_H */ diff --git a/include/linux/platform_data/usb-exynos.h b/include/linux/platform_data/usb-exynos.h new file mode 100644 index 000000000000..c256c595be5e --- /dev/null +++ b/include/linux/platform_data/usb-exynos.h @@ -0,0 +1,21 @@ +/* + * Copyright (C) 2011 Samsung Electronics Co.Ltd + * http://www.samsung.com/ + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#ifndef __MACH_EXYNOS_OHCI_H +#define __MACH_EXYNOS_OHCI_H + +struct exynos4_ohci_platdata { + int (*phy_init)(struct platform_device *pdev, int type); + int (*phy_exit)(struct platform_device *pdev, int type); +}; + +extern void exynos4_ohci_set_platdata(struct exynos4_ohci_platdata *pd); + +#endif /* __MACH_EXYNOS_OHCI_H */ diff --git a/include/linux/platform_data/usb-imx_udc.h b/include/linux/platform_data/usb-imx_udc.h new file mode 100644 index 000000000000..be273371f34a --- /dev/null +++ b/include/linux/platform_data/usb-imx_udc.h @@ -0,0 +1,23 @@ +/* + * Copyright (C) 2008 Darius Augulis <augulis.darius@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __ASM_ARCH_MXC_USB +#define __ASM_ARCH_MXC_USB + +struct imxusb_platform_data { + int (*init)(struct device *); + void (*exit)(struct device *); +}; + +#endif /* __ASM_ARCH_MXC_USB */ diff --git a/include/linux/platform_data/usb-musb-ux500.h b/include/linux/platform_data/usb-musb-ux500.h new file mode 100644 index 000000000000..4c1cc50a595a --- /dev/null +++ b/include/linux/platform_data/usb-musb-ux500.h @@ -0,0 +1,25 @@ +/* + * Copyright (C) ST-Ericsson SA 2011 + * + * Author: Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com> + * License terms: GNU General Public License (GPL) version 2 + */ +#ifndef __ASM_ARCH_USB_H +#define __ASM_ARCH_USB_H + +#include <linux/dmaengine.h> + +#define UX500_MUSB_DMA_NUM_RX_CHANNELS 8 +#define UX500_MUSB_DMA_NUM_TX_CHANNELS 8 + +struct ux500_musb_board_data { + void **dma_rx_param_array; + void **dma_tx_param_array; + u32 num_rx_channels; + u32 num_tx_channels; + bool (*dma_filter)(struct dma_chan *chan, void *filter_param); +}; + +void ux500_add_usb(struct device *parent, resource_size_t base, + int irq, int *dma_rx_cfg, int *dma_tx_cfg); +#endif diff --git a/include/linux/platform_data/usb-mx2.h b/include/linux/platform_data/usb-mx2.h new file mode 100644 index 000000000000..22d0b596262c --- /dev/null +++ b/include/linux/platform_data/usb-mx2.h @@ -0,0 +1,38 @@ +/* + * Copyright (C) 2009 Martin Fuzzey <mfuzzey@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __ASM_ARCH_MX21_USBH +#define __ASM_ARCH_MX21_USBH + +enum mx21_usbh_xcvr { + /* Values below as used by hardware (HWMODE register) */ + MX21_USBXCVR_TXDIF_RXDIF = 0, + MX21_USBXCVR_TXDIF_RXSE = 1, + MX21_USBXCVR_TXSE_RXDIF = 2, + MX21_USBXCVR_TXSE_RXSE = 3, +}; + +struct mx21_usbh_platform_data { + enum mx21_usbh_xcvr host_xcvr; /* tranceiver mode host 1,2 ports */ + enum mx21_usbh_xcvr otg_xcvr; /* tranceiver mode otg (as host) port */ + u16 enable_host1:1, + enable_host2:1, + enable_otg_host:1, /* enable "OTG" port (as host) */ + host1_xcverless:1, /* traceiverless host1 port */ + host1_txenoe:1, /* output enable host1 transmit enable */ + otg_ext_xcvr:1, /* external tranceiver for OTG port */ + unused:10; +}; + +#endif /* __ASM_ARCH_MX21_USBH */ diff --git a/include/linux/platform_data/usb-ohci-pxa27x.h b/include/linux/platform_data/usb-ohci-pxa27x.h new file mode 100644 index 000000000000..95b6e2a6e514 --- /dev/null +++ b/include/linux/platform_data/usb-ohci-pxa27x.h @@ -0,0 +1,36 @@ +#ifndef ASMARM_ARCH_OHCI_H +#define ASMARM_ARCH_OHCI_H + +struct device; + +struct pxaohci_platform_data { + int (*init)(struct device *); + void (*exit)(struct device *); + + unsigned long flags; +#define ENABLE_PORT1 (1 << 0) +#define ENABLE_PORT2 (1 << 1) +#define ENABLE_PORT3 (1 << 2) +#define ENABLE_PORT_ALL (ENABLE_PORT1 | ENABLE_PORT2 | ENABLE_PORT3) + +#define POWER_SENSE_LOW (1 << 3) +#define POWER_CONTROL_LOW (1 << 4) +#define NO_OC_PROTECTION (1 << 5) +#define OC_MODE_GLOBAL (0 << 6) +#define OC_MODE_PERPORT (1 << 6) + + int power_on_delay; /* Power On to Power Good time - in ms + * HCD must wait for this duration before + * accessing a powered on port + */ + int port_mode; +#define PMM_NPS_MODE 1 +#define PMM_GLOBAL_MODE 2 +#define PMM_PERPORT_MODE 3 + + int power_budget; +}; + +extern void pxa_set_ohci_info(struct pxaohci_platform_data *info); + +#endif diff --git a/include/linux/platform_data/usb-ohci-s3c2410.h b/include/linux/platform_data/usb-ohci-s3c2410.h new file mode 100644 index 000000000000..7fa1fbefc3f2 --- /dev/null +++ b/include/linux/platform_data/usb-ohci-s3c2410.h @@ -0,0 +1,43 @@ +/* arch/arm/plat-samsung/include/plat/usb-control.h + * + * Copyright (c) 2004 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * S3C - USB host port information + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_USBCONTROL_H +#define __ASM_ARCH_USBCONTROL_H + +#define S3C_HCDFLG_USED (1) + +struct s3c2410_hcd_port { + unsigned char flags; + unsigned char power; + unsigned char oc_status; + unsigned char oc_changed; +}; + +struct s3c2410_hcd_info { + struct usb_hcd *hcd; + struct s3c2410_hcd_port port[2]; + + void (*power_control)(int port, int to); + void (*enable_oc)(struct s3c2410_hcd_info *, int on); + void (*report_oc)(struct s3c2410_hcd_info *, int ports); +}; + +static void inline s3c2410_usb_report_oc(struct s3c2410_hcd_info *info, int ports) +{ + if (info->report_oc != NULL) { + (info->report_oc)(info, ports); + } +} + +extern void s3c_ohci_set_platdata(struct s3c2410_hcd_info *info); + +#endif /*__ASM_ARCH_USBCONTROL_H */ diff --git a/include/linux/platform_data/usb-pxa3xx-ulpi.h b/include/linux/platform_data/usb-pxa3xx-ulpi.h new file mode 100644 index 000000000000..9d82cb65ea56 --- /dev/null +++ b/include/linux/platform_data/usb-pxa3xx-ulpi.h @@ -0,0 +1,35 @@ +/* + * PXA3xx U2D header + * + * Copyright (C) 2010 CompuLab Ltd. + * + * Igor Grinberg <grinberg@compulab.co.il> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __PXA310_U2D__ +#define __PXA310_U2D__ + +#include <linux/usb/ulpi.h> + +struct pxa3xx_u2d_platform_data { + +#define ULPI_SER_6PIN (1 << 0) +#define ULPI_SER_3PIN (1 << 1) + unsigned int ulpi_mode; + + int (*init)(struct device *); + void (*exit)(struct device *); +}; + + +/* Start PXA3xx U2D host */ +int pxa3xx_u2d_start_hc(struct usb_bus *host); +/* Stop PXA3xx U2D host */ +void pxa3xx_u2d_stop_hc(struct usb_bus *host); + +extern void pxa3xx_set_u2d_info(struct pxa3xx_u2d_platform_data *info); + +#endif /* __PXA310_U2D__ */ diff --git a/include/linux/platform_data/usb-s3c2410_udc.h b/include/linux/platform_data/usb-s3c2410_udc.h new file mode 100644 index 000000000000..de8e2288a509 --- /dev/null +++ b/include/linux/platform_data/usb-s3c2410_udc.h @@ -0,0 +1,44 @@ +/* arch/arm/plat-samsung/include/plat/udc.h + * + * Copyright (c) 2005 Arnaud Patard <arnaud.patard@rtp-net.org> + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * + * Changelog: + * 14-Mar-2005 RTP Created file + * 02-Aug-2005 RTP File rename + * 07-Sep-2005 BJD Minor cleanups, changed cmd to enum + * 18-Jan-2007 HMW Add per-platform vbus_draw function +*/ + +#ifndef __ASM_ARM_ARCH_UDC_H +#define __ASM_ARM_ARCH_UDC_H + +enum s3c2410_udc_cmd_e { + S3C2410_UDC_P_ENABLE = 1, /* Pull-up enable */ + S3C2410_UDC_P_DISABLE = 2, /* Pull-up disable */ + S3C2410_UDC_P_RESET = 3, /* UDC reset, in case of */ +}; + +struct s3c2410_udc_mach_info { + void (*udc_command)(enum s3c2410_udc_cmd_e); + void (*vbus_draw)(unsigned int ma); + + unsigned int pullup_pin; + unsigned int pullup_pin_inverted; + + unsigned int vbus_pin; + unsigned char vbus_pin_inverted; +}; + +extern void __init s3c24xx_udc_set_platdata(struct s3c2410_udc_mach_info *); + +struct s3c24xx_hsudc_platdata; + +extern void __init s3c24xx_hsudc_set_platdata(struct s3c24xx_hsudc_platdata *pd); + +#endif /* __ASM_ARM_ARCH_UDC_H */ diff --git a/include/linux/platform_data/video-ep93xx.h b/include/linux/platform_data/video-ep93xx.h new file mode 100644 index 000000000000..d5ae11d7c453 --- /dev/null +++ b/include/linux/platform_data/video-ep93xx.h @@ -0,0 +1,56 @@ +/* + * arch/arm/mach-ep93xx/include/mach/fb.h + */ + +#ifndef __ASM_ARCH_EP93XXFB_H +#define __ASM_ARCH_EP93XXFB_H + +struct platform_device; +struct fb_videomode; +struct fb_info; + +#define EP93XXFB_USE_MODEDB 0 + +/* VideoAttributes flags */ +#define EP93XXFB_STATE_MACHINE_ENABLE (1 << 0) +#define EP93XXFB_PIXEL_CLOCK_ENABLE (1 << 1) +#define EP93XXFB_VSYNC_ENABLE (1 << 2) +#define EP93XXFB_PIXEL_DATA_ENABLE (1 << 3) +#define EP93XXFB_COMPOSITE_SYNC (1 << 4) +#define EP93XXFB_SYNC_VERT_HIGH (1 << 5) +#define EP93XXFB_SYNC_HORIZ_HIGH (1 << 6) +#define EP93XXFB_SYNC_BLANK_HIGH (1 << 7) +#define EP93XXFB_PCLK_FALLING (1 << 8) +#define EP93XXFB_ENABLE_AC (1 << 9) +#define EP93XXFB_ENABLE_LCD (1 << 10) +#define EP93XXFB_ENABLE_CCIR (1 << 12) +#define EP93XXFB_USE_PARALLEL_INTERFACE (1 << 13) +#define EP93XXFB_ENABLE_INTERRUPT (1 << 14) +#define EP93XXFB_USB_INTERLACE (1 << 16) +#define EP93XXFB_USE_EQUALIZATION (1 << 17) +#define EP93XXFB_USE_DOUBLE_HORZ (1 << 18) +#define EP93XXFB_USE_DOUBLE_VERT (1 << 19) +#define EP93XXFB_USE_BLANK_PIXEL (1 << 20) +#define EP93XXFB_USE_SDCSN0 (0 << 21) +#define EP93XXFB_USE_SDCSN1 (1 << 21) +#define EP93XXFB_USE_SDCSN2 (2 << 21) +#define EP93XXFB_USE_SDCSN3 (3 << 21) + +#define EP93XXFB_ENABLE (EP93XXFB_STATE_MACHINE_ENABLE | \ + EP93XXFB_PIXEL_CLOCK_ENABLE | \ + EP93XXFB_VSYNC_ENABLE | \ + EP93XXFB_PIXEL_DATA_ENABLE) + +struct ep93xxfb_mach_info { + unsigned int num_modes; + const struct fb_videomode *modes; + const struct fb_videomode *default_mode; + int bpp; + unsigned int flags; + + int (*setup)(struct platform_device *pdev); + void (*teardown)(struct platform_device *pdev); + void (*blank)(int blank_mode, struct fb_info *info); +}; + +#endif /* __ASM_ARCH_EP93XXFB_H */ diff --git a/include/linux/platform_data/video-imxfb.h b/include/linux/platform_data/video-imxfb.h new file mode 100644 index 000000000000..9de8f062ad5d --- /dev/null +++ b/include/linux/platform_data/video-imxfb.h @@ -0,0 +1,84 @@ +/* + * This structure describes the machine which we are running on. + */ +#ifndef __MACH_IMXFB_H__ +#define __MACH_IMXFB_H__ + +#include <linux/fb.h> + +#define PCR_TFT (1 << 31) +#define PCR_COLOR (1 << 30) +#define PCR_PBSIZ_1 (0 << 28) +#define PCR_PBSIZ_2 (1 << 28) +#define PCR_PBSIZ_4 (2 << 28) +#define PCR_PBSIZ_8 (3 << 28) +#define PCR_BPIX_1 (0 << 25) +#define PCR_BPIX_2 (1 << 25) +#define PCR_BPIX_4 (2 << 25) +#define PCR_BPIX_8 (3 << 25) +#define PCR_BPIX_12 (4 << 25) +#define PCR_BPIX_16 (5 << 25) +#define PCR_BPIX_18 (6 << 25) +#define PCR_PIXPOL (1 << 24) +#define PCR_FLMPOL (1 << 23) +#define PCR_LPPOL (1 << 22) +#define PCR_CLKPOL (1 << 21) +#define PCR_OEPOL (1 << 20) +#define PCR_SCLKIDLE (1 << 19) +#define PCR_END_SEL (1 << 18) +#define PCR_END_BYTE_SWAP (1 << 17) +#define PCR_REV_VS (1 << 16) +#define PCR_ACD_SEL (1 << 15) +#define PCR_ACD(x) (((x) & 0x7f) << 8) +#define PCR_SCLK_SEL (1 << 7) +#define PCR_SHARP (1 << 6) +#define PCR_PCD(x) ((x) & 0x3f) + +#define PWMR_CLS(x) (((x) & 0x1ff) << 16) +#define PWMR_LDMSK (1 << 15) +#define PWMR_SCR1 (1 << 10) +#define PWMR_SCR0 (1 << 9) +#define PWMR_CC_EN (1 << 8) +#define PWMR_PW(x) ((x) & 0xff) + +#define LSCR1_PS_RISE_DELAY(x) (((x) & 0x7f) << 26) +#define LSCR1_CLS_RISE_DELAY(x) (((x) & 0x3f) << 16) +#define LSCR1_REV_TOGGLE_DELAY(x) (((x) & 0xf) << 8) +#define LSCR1_GRAY2(x) (((x) & 0xf) << 4) +#define LSCR1_GRAY1(x) (((x) & 0xf)) + +#define DMACR_BURST (1 << 31) +#define DMACR_HM(x) (((x) & 0xf) << 16) +#define DMACR_TM(x) ((x) & 0xf) + +struct imx_fb_videomode { + struct fb_videomode mode; + u32 pcr; + unsigned char bpp; +}; + +struct imx_fb_platform_data { + struct imx_fb_videomode *mode; + int num_modes; + + u_int cmap_greyscale:1, + cmap_inverse:1, + cmap_static:1, + unused:29; + + u_int pwmr; + u_int lscr1; + u_int dmacr; + + u_char * fixed_screen_cpu; + dma_addr_t fixed_screen_dma; + + int (*init)(struct platform_device *); + void (*exit)(struct platform_device *); + + void (*lcd_power)(int); + void (*backlight_power)(int); +}; + +void set_imx_fb_info(struct imx_fb_platform_data *); +#endif /* ifndef __MACH_IMXFB_H__ */ diff --git a/include/linux/platform_data/video-msm_fb.h b/include/linux/platform_data/video-msm_fb.h new file mode 100644 index 000000000000..1f4fc81b3d8f --- /dev/null +++ b/include/linux/platform_data/video-msm_fb.h @@ -0,0 +1,147 @@ +/* arch/arm/mach-msm/include/mach/msm_fb.h + * + * Internal shared definitions for various MSM framebuffer parts. + * + * Copyright (C) 2007 Google Incorporated + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef _MSM_FB_H_ +#define _MSM_FB_H_ + +#include <linux/device.h> + +struct mddi_info; + +struct msm_fb_data { + int xres; /* x resolution in pixels */ + int yres; /* y resolution in pixels */ + int width; /* disply width in mm */ + int height; /* display height in mm */ + unsigned output_format; +}; + +struct msmfb_callback { + void (*func)(struct msmfb_callback *); +}; + +enum { + MSM_MDDI_PMDH_INTERFACE, + MSM_MDDI_EMDH_INTERFACE, + MSM_EBI2_INTERFACE, +}; + +#define MSMFB_CAP_PARTIAL_UPDATES (1 << 0) + +struct msm_panel_data { + /* turns off the fb memory */ + int (*suspend)(struct msm_panel_data *); + /* turns on the fb memory */ + int (*resume)(struct msm_panel_data *); + /* turns off the panel */ + int (*blank)(struct msm_panel_data *); + /* turns on the panel */ + int (*unblank)(struct msm_panel_data *); + void (*wait_vsync)(struct msm_panel_data *); + void (*request_vsync)(struct msm_panel_data *, struct msmfb_callback *); + void (*clear_vsync)(struct msm_panel_data *); + /* from the enum above */ + unsigned interface_type; + /* data to be passed to the fb driver */ + struct msm_fb_data *fb_data; + + /* capabilities supported by the panel */ + uint32_t caps; +}; + +struct msm_mddi_client_data { + void (*suspend)(struct msm_mddi_client_data *); + void (*resume)(struct msm_mddi_client_data *); + void (*activate_link)(struct msm_mddi_client_data *); + void (*remote_write)(struct msm_mddi_client_data *, uint32_t val, + uint32_t reg); + uint32_t (*remote_read)(struct msm_mddi_client_data *, uint32_t reg); + void (*auto_hibernate)(struct msm_mddi_client_data *, int); + /* custom data that needs to be passed from the board file to a + * particular client */ + void *private_client_data; + struct resource *fb_resource; + /* from the list above */ + unsigned interface_type; +}; + +struct msm_mddi_platform_data { + unsigned int clk_rate; + void (*power_client)(struct msm_mddi_client_data *, int on); + + /* fixup the mfr name, product id */ + void (*fixup)(uint16_t *mfr_name, uint16_t *product_id); + + struct resource *fb_resource; /*optional*/ + /* number of clients in the list that follows */ + int num_clients; + /* array of client information of clients */ + struct { + unsigned product_id; /* mfr id in top 16 bits, product id + * in lower 16 bits + */ + char *name; /* the device name will be the platform + * device name registered for the client, + * it should match the name of the associated + * driver + */ + unsigned id; /* id for mddi client device node, will also + * be used as device id of panel devices, if + * the client device will have multiple panels + * space must be left here for them + */ + void *client_data; /* required private client data */ + unsigned int clk_rate; /* optional: if the client requires a + * different mddi clk rate + */ + } client_platform_data[]; +}; + +struct mdp_blit_req; +struct fb_info; +struct mdp_device { + struct device dev; + void (*dma)(struct mdp_device *mpd, uint32_t addr, + uint32_t stride, uint32_t w, uint32_t h, uint32_t x, + uint32_t y, struct msmfb_callback *callback, int interface); + void (*dma_wait)(struct mdp_device *mdp); + int (*blit)(struct mdp_device *mdp, struct fb_info *fb, + struct mdp_blit_req *req); + void (*set_grp_disp)(struct mdp_device *mdp, uint32_t disp_id); +}; + +struct class_interface; +int register_mdp_client(struct class_interface *class_intf); + +/**** private client data structs go below this line ***/ + +struct msm_mddi_bridge_platform_data { + /* from board file */ + int (*init)(struct msm_mddi_bridge_platform_data *, + struct msm_mddi_client_data *); + int (*uninit)(struct msm_mddi_bridge_platform_data *, + struct msm_mddi_client_data *); + /* passed to panel for use by the fb driver */ + int (*blank)(struct msm_mddi_bridge_platform_data *, + struct msm_mddi_client_data *); + int (*unblank)(struct msm_mddi_bridge_platform_data *, + struct msm_mddi_client_data *); + struct msm_fb_data fb_data; +}; + + + +#endif diff --git a/include/linux/platform_data/video-mx3fb.h b/include/linux/platform_data/video-mx3fb.h new file mode 100644 index 000000000000..fdbe60001542 --- /dev/null +++ b/include/linux/platform_data/video-mx3fb.h @@ -0,0 +1,53 @@ +/* + * Copyright (C) 2008 + * Guennadi Liakhovetski, DENX Software Engineering, <lg@denx.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_ARCH_MX3FB_H__ +#define __ASM_ARCH_MX3FB_H__ + +#include <linux/device.h> +#include <linux/fb.h> + +/* Proprietary FB_SYNC_ flags */ +#define FB_SYNC_OE_ACT_HIGH 0x80000000 +#define FB_SYNC_CLK_INVERT 0x40000000 +#define FB_SYNC_DATA_INVERT 0x20000000 +#define FB_SYNC_CLK_IDLE_EN 0x10000000 +#define FB_SYNC_SHARP_MODE 0x08000000 +#define FB_SYNC_SWAP_RGB 0x04000000 +#define FB_SYNC_CLK_SEL_EN 0x02000000 + +/* + * Specify the way your display is connected. The IPU can arbitrarily + * map the internal colors to the external data lines. We only support + * the following mappings at the moment. + */ +enum disp_data_mapping { + /* blue -> d[0..5], green -> d[6..11], red -> d[12..17] */ + IPU_DISP_DATA_MAPPING_RGB666, + /* blue -> d[0..4], green -> d[5..10], red -> d[11..15] */ + IPU_DISP_DATA_MAPPING_RGB565, + /* blue -> d[0..7], green -> d[8..15], red -> d[16..23] */ + IPU_DISP_DATA_MAPPING_RGB888, +}; + +/** + * struct mx3fb_platform_data - mx3fb platform data + * + * @dma_dev: pointer to the dma-device, used for dma-slave connection + * @mode: pointer to a platform-provided per mxc_register_fb() videomode + */ +struct mx3fb_platform_data { + struct device *dma_dev; + const char *name; + const struct fb_videomode *mode; + int num_modes; + enum disp_data_mapping disp_data_fmt; +}; + +#endif diff --git a/include/linux/platform_data/video-nuc900fb.h b/include/linux/platform_data/video-nuc900fb.h new file mode 100644 index 000000000000..cec5ece765ed --- /dev/null +++ b/include/linux/platform_data/video-nuc900fb.h @@ -0,0 +1,83 @@ +/* linux/include/asm/arch-nuc900/fb.h + * + * Copyright (c) 2008 Nuvoton technology corporation + * All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * Changelog: + * + * 2008/08/26 vincen.zswan modify this file for LCD. + */ + +#ifndef __ASM_ARM_FB_H +#define __ASM_ARM_FB_H + + + +/* LCD Controller Hardware Desc */ +struct nuc900fb_hw { + unsigned int lcd_dccs; + unsigned int lcd_device_ctrl; + unsigned int lcd_mpulcd_cmd; + unsigned int lcd_int_cs; + unsigned int lcd_crtc_size; + unsigned int lcd_crtc_dend; + unsigned int lcd_crtc_hr; + unsigned int lcd_crtc_hsync; + unsigned int lcd_crtc_vr; + unsigned int lcd_va_baddr0; + unsigned int lcd_va_baddr1; + unsigned int lcd_va_fbctrl; + unsigned int lcd_va_scale; + unsigned int lcd_va_test; + unsigned int lcd_va_win; + unsigned int lcd_va_stuff; +}; + +/* LCD Display Description */ +struct nuc900fb_display { + /* LCD Image type */ + unsigned type; + + /* LCD Screen Size */ + unsigned short width; + unsigned short height; + + /* LCD Screen Info */ + unsigned short xres; + unsigned short yres; + unsigned short bpp; + + unsigned long pixclock; + unsigned short left_margin; + unsigned short right_margin; + unsigned short hsync_len; + unsigned short upper_margin; + unsigned short lower_margin; + unsigned short vsync_len; + + /* hardware special register value */ + unsigned int dccs; + unsigned int devctl; + unsigned int fbctrl; + unsigned int scale; +}; + +struct nuc900fb_mach_info { + struct nuc900fb_display *displays; + unsigned num_displays; + unsigned default_display; + /* GPIO Setting Info */ + unsigned gpio_dir; + unsigned gpio_dir_mask; + unsigned gpio_data; + unsigned gpio_data_mask; +}; + +extern void __init nuc900_fb_set_platdata(struct nuc900fb_mach_info *); + +#endif /* __ASM_ARM_FB_H */ diff --git a/include/linux/platform_data/video-pxafb.h b/include/linux/platform_data/video-pxafb.h new file mode 100644 index 000000000000..486b4c519ae2 --- /dev/null +++ b/include/linux/platform_data/video-pxafb.h @@ -0,0 +1,175 @@ +/* + * arch/arm/mach-pxa/include/mach/pxafb.h + * + * Support for the xscale frame buffer. + * + * Author: Jean-Frederic Clere + * Created: Sep 22, 2003 + * Copyright: jfclere@sinix.net + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/fb.h> +#include <mach/regs-lcd.h> + +/* + * Supported LCD connections + * + * bits 0 - 3: for LCD panel type: + * + * STN - for passive matrix + * DSTN - for dual scan passive matrix + * TFT - for active matrix + * + * bits 4 - 9 : for bus width + * bits 10-17 : for AC Bias Pin Frequency + * bit 18 : for output enable polarity + * bit 19 : for pixel clock edge + * bit 20 : for output pixel format when base is RGBT16 + */ +#define LCD_CONN_TYPE(_x) ((_x) & 0x0f) +#define LCD_CONN_WIDTH(_x) (((_x) >> 4) & 0x1f) + +#define LCD_TYPE_MASK 0xf +#define LCD_TYPE_UNKNOWN 0 +#define LCD_TYPE_MONO_STN 1 +#define LCD_TYPE_MONO_DSTN 2 +#define LCD_TYPE_COLOR_STN 3 +#define LCD_TYPE_COLOR_DSTN 4 +#define LCD_TYPE_COLOR_TFT 5 +#define LCD_TYPE_SMART_PANEL 6 +#define LCD_TYPE_MAX 7 + +#define LCD_MONO_STN_4BPP ((4 << 4) | LCD_TYPE_MONO_STN) +#define LCD_MONO_STN_8BPP ((8 << 4) | LCD_TYPE_MONO_STN) +#define LCD_MONO_DSTN_8BPP ((8 << 4) | LCD_TYPE_MONO_DSTN) +#define LCD_COLOR_STN_8BPP ((8 << 4) | LCD_TYPE_COLOR_STN) +#define LCD_COLOR_DSTN_16BPP ((16 << 4) | LCD_TYPE_COLOR_DSTN) +#define LCD_COLOR_TFT_8BPP ((8 << 4) | LCD_TYPE_COLOR_TFT) +#define LCD_COLOR_TFT_16BPP ((16 << 4) | LCD_TYPE_COLOR_TFT) +#define LCD_COLOR_TFT_18BPP ((18 << 4) | LCD_TYPE_COLOR_TFT) +#define LCD_SMART_PANEL_8BPP ((8 << 4) | LCD_TYPE_SMART_PANEL) +#define LCD_SMART_PANEL_16BPP ((16 << 4) | LCD_TYPE_SMART_PANEL) +#define LCD_SMART_PANEL_18BPP ((18 << 4) | LCD_TYPE_SMART_PANEL) + +#define LCD_AC_BIAS_FREQ(x) (((x) & 0xff) << 10) +#define LCD_BIAS_ACTIVE_HIGH (0 << 18) +#define LCD_BIAS_ACTIVE_LOW (1 << 18) +#define LCD_PCLK_EDGE_RISE (0 << 19) +#define LCD_PCLK_EDGE_FALL (1 << 19) +#define LCD_ALTERNATE_MAPPING (1 << 20) + +/* + * This structure describes the machine which we are running on. + * It is set in linux/arch/arm/mach-pxa/machine_name.c and used in the probe routine + * of linux/drivers/video/pxafb.c + */ +struct pxafb_mode_info { + u_long pixclock; + + u_short xres; + u_short yres; + + u_char bpp; + u_int cmap_greyscale:1, + depth:8, + transparency:1, + unused:22; + + /* Parallel Mode Timing */ + u_char hsync_len; + u_char left_margin; + u_char right_margin; + + u_char vsync_len; + u_char upper_margin; + u_char lower_margin; + u_char sync; + + /* Smart Panel Mode Timing - see PXA27x DM 7.4.15.0.3 for details + * Note: + * 1. all parameters in nanosecond (ns) + * 2. a0cs{rd,wr}_set_hld are controlled by the same register bits + * in pxa27x and pxa3xx, initialize them to the same value or + * the larger one will be used + * 3. same to {rd,wr}_pulse_width + * + * 4. LCD_PCLK_EDGE_{RISE,FALL} controls the L_PCLK_WR polarity + * 5. sync & FB_SYNC_HOR_HIGH_ACT controls the L_LCLK_A0 + * 6. sync & FB_SYNC_VERT_HIGH_ACT controls the L_LCLK_RD + */ + unsigned a0csrd_set_hld; /* A0 and CS Setup/Hold Time before/after L_FCLK_RD */ + unsigned a0cswr_set_hld; /* A0 and CS Setup/Hold Time before/after L_PCLK_WR */ + unsigned wr_pulse_width; /* L_PCLK_WR pulse width */ + unsigned rd_pulse_width; /* L_FCLK_RD pulse width */ + unsigned cmd_inh_time; /* Command Inhibit time between two writes */ + unsigned op_hold_time; /* Output Hold time from L_FCLK_RD negation */ +}; + +struct pxafb_mach_info { + struct pxafb_mode_info *modes; + unsigned int num_modes; + + unsigned int lcd_conn; + unsigned long video_mem_size; + + u_int fixed_modes:1, + cmap_inverse:1, + cmap_static:1, + acceleration_enabled:1, + unused:28; + + /* The following should be defined in LCCR0 + * LCCR0_Act or LCCR0_Pas Active or Passive + * LCCR0_Sngl or LCCR0_Dual Single/Dual panel + * LCCR0_Mono or LCCR0_Color Mono/Color + * LCCR0_4PixMono or LCCR0_8PixMono (in mono single mode) + * LCCR0_DMADel(Tcpu) (optional) DMA request delay + * + * The following should not be defined in LCCR0: + * LCCR0_OUM, LCCR0_BM, LCCR0_QDM, LCCR0_DIS, LCCR0_EFM + * LCCR0_IUM, LCCR0_SFM, LCCR0_LDM, LCCR0_ENB + */ + u_int lccr0; + /* The following should be defined in LCCR3 + * LCCR3_OutEnH or LCCR3_OutEnL Output enable polarity + * LCCR3_PixRsEdg or LCCR3_PixFlEdg Pixel clock edge type + * LCCR3_Acb(X) AB Bias pin frequency + * LCCR3_DPC (optional) Double Pixel Clock mode (untested) + * + * The following should not be defined in LCCR3 + * LCCR3_HSP, LCCR3_VSP, LCCR0_Pcd(x), LCCR3_Bpp + */ + u_int lccr3; + /* The following should be defined in LCCR4 + * LCCR4_PAL_FOR_0 or LCCR4_PAL_FOR_1 or LCCR4_PAL_FOR_2 + * + * All other bits in LCCR4 should be left alone. + */ + u_int lccr4; + void (*pxafb_backlight_power)(int); + void (*pxafb_lcd_power)(int, struct fb_var_screeninfo *); + void (*smart_update)(struct fb_info *); +}; + +void pxa_set_fb_info(struct device *, struct pxafb_mach_info *); +unsigned long pxafb_get_hsync_time(struct device *dev); + +#ifdef CONFIG_FB_PXA_SMARTPANEL +extern int pxafb_smart_queue(struct fb_info *info, uint16_t *cmds, int); +extern int pxafb_smart_flush(struct fb_info *info); +#else +static inline int pxafb_smart_queue(struct fb_info *info, + uint16_t *cmds, int n) +{ + return 0; +} + +static inline int pxafb_smart_flush(struct fb_info *info) +{ + return 0; +} +#endif diff --git a/include/linux/platform_data/video-vt8500lcdfb.h b/include/linux/platform_data/video-vt8500lcdfb.h new file mode 100644 index 000000000000..7f399c370fe0 --- /dev/null +++ b/include/linux/platform_data/video-vt8500lcdfb.h @@ -0,0 +1,31 @@ +/* + * VT8500/WM8505 Frame Buffer platform data definitions + * + * Copyright (C) 2010 Ed Spiridonov <edo.rus@gmail.com> + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef _VT8500FB_H +#define _VT8500FB_H + +#include <linux/fb.h> + +struct vt8500fb_platform_data { + struct fb_videomode mode; + u32 xres_virtual; + u32 yres_virtual; + u32 bpp; + unsigned long video_mem_phys; + void *video_mem_virt; + unsigned long video_mem_len; +}; + +#endif /* _VT8500FB_H */ diff --git a/include/linux/platform_data/voltage-omap.h b/include/linux/platform_data/voltage-omap.h new file mode 100644 index 000000000000..5be4d5def427 --- /dev/null +++ b/include/linux/platform_data/voltage-omap.h @@ -0,0 +1,39 @@ +/* + * OMAP Voltage Management Routines + * + * Copyright (C) 2011, Texas Instruments, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ARCH_ARM_OMAP_VOLTAGE_H +#define __ARCH_ARM_OMAP_VOLTAGE_H + +/** + * struct omap_volt_data - Omap voltage specific data. + * @voltage_nominal: The possible voltage value in uV + * @sr_efuse_offs: The offset of the efuse register(from system + * control module base address) from where to read + * the n-target value for the smartreflex module. + * @sr_errminlimit: Error min limit value for smartreflex. This value + * differs at differnet opp and thus is linked + * with voltage. + * @vp_errorgain: Error gain value for the voltage processor. This + * field also differs according to the voltage/opp. + */ +struct omap_volt_data { + u32 volt_nominal; + u32 sr_efuse_offs; + u8 sr_errminlimit; + u8 vp_errgain; +}; +struct voltagedomain; + +struct voltagedomain *voltdm_lookup(const char *name); +int voltdm_scale(struct voltagedomain *voltdm, unsigned long target_volt); +unsigned long voltdm_get_voltage(struct voltagedomain *voltdm); +struct omap_volt_data *omap_voltage_get_voltdata(struct voltagedomain *voltdm, + unsigned long volt); +#endif |