diff options
Diffstat (limited to 'include/linux/phylink.h')
| -rw-r--r-- | include/linux/phylink.h | 145 |
1 files changed, 145 insertions, 0 deletions
diff --git a/include/linux/phylink.h b/include/linux/phylink.h new file mode 100644 index 000000000000..76f054f39684 --- /dev/null +++ b/include/linux/phylink.h @@ -0,0 +1,145 @@ +#ifndef NETDEV_PCS_H +#define NETDEV_PCS_H + +#include <linux/phy.h> +#include <linux/spinlock.h> +#include <linux/workqueue.h> + +struct device_node; +struct ethtool_cmd; +struct net_device; + +enum { + MLO_PAUSE_NONE, + MLO_PAUSE_ASYM = BIT(0), + MLO_PAUSE_SYM = BIT(1), + MLO_PAUSE_RX = BIT(2), + MLO_PAUSE_TX = BIT(3), + MLO_PAUSE_TXRX_MASK = MLO_PAUSE_TX | MLO_PAUSE_RX, + MLO_PAUSE_AN = BIT(4), + + MLO_AN_PHY = 0, /* Conventional PHY */ + MLO_AN_FIXED, /* Fixed-link mode */ + MLO_AN_SGMII, /* Cisco SGMII protocol */ + MLO_AN_8023Z, /* 1000base-X protocol */ +}; + +static inline bool phylink_autoneg_inband(unsigned int mode) +{ + return mode == MLO_AN_SGMII || mode == MLO_AN_8023Z; +} + +struct phylink_link_state { + __ETHTOOL_DECLARE_LINK_MODE_MASK(advertising); + __ETHTOOL_DECLARE_LINK_MODE_MASK(lp_advertising); + phy_interface_t interface; /* PHY_INTERFACE_xxx */ + int speed; + int duplex; + int pause; + unsigned int link:1; + unsigned int an_enabled:1; + unsigned int an_complete:1; +}; + +struct phylink_mac_ops { + /** + * validate: validate and update the link configuration + * @ndev: net_device structure associated with MAC + * @config: configuration to validate + * + * Update the %config->supported and %config->advertised masks + * clearing bits that can not be supported. + * + * Note: the PHY may be able to transform from one connection + * technology to another, so, eg, don't clear 1000BaseX just + * because the MAC is unable to support it. This is more about + * clearing unsupported speeds and duplex settings. + * + * If the %config->interface mode is %PHY_INTERFACE_MODE_1000BASEX + * or %PHY_INTERFACE_MODE_2500BASEX, select the appropriate mode + * based on %config->advertised and/or %config->speed. + */ + void (*validate)(struct net_device *ndev, unsigned long *supported, + struct phylink_link_state *state); + + /* Read the current link state from the hardware */ + int (*mac_link_state)(struct net_device *, struct phylink_link_state *); + + /* Configure the MAC */ + /** + * mac_config: configure the MAC for the selected mode and state + * @ndev: net_device structure for the MAC + * @mode: one of MLO_AN_FIXED, MLO_AN_PHY, MLO_AN_8023Z, MLO_AN_SGMII + * @state: state structure + * + * The action performed depends on the currently selected mode: + * + * %MLO_AN_FIXED, %MLO_AN_PHY: + * set the specified speed, duplex, pause mode, and phy interface + * mode in the provided @state. + * %MLO_AN_8023Z: + * place the link in 1000base-X mode, advertising the parameters + * given in advertising in @state. + * %MLO_AN_SGMII: + * place the link in Cisco SGMII mode - there is no advertisment + * to make as the PHY communicates the speed and duplex to the + * MAC over the in-band control word. Configuration of the pause + * mode is as per MLO_AN_PHY since this is not included. + */ + void (*mac_config)(struct net_device *ndev, unsigned int mode, + const struct phylink_link_state *state); + + /** + * mac_an_restart: restart 802.3z BaseX autonegotiation + * @ndev: net_device structure for the MAC + */ + void (*mac_an_restart)(struct net_device *ndev); + + void (*mac_link_down)(struct net_device *, unsigned int mode); + void (*mac_link_up)(struct net_device *, unsigned int mode, + struct phy_device *); +}; + +struct phylink *phylink_create(struct net_device *, struct device_node *, + phy_interface_t iface, const struct phylink_mac_ops *ops); +void phylink_destroy(struct phylink *); + +int phylink_connect_phy(struct phylink *, struct phy_device *); +int phylink_of_phy_connect(struct phylink *, struct device_node *); +void phylink_disconnect_phy(struct phylink *); + +void phylink_mac_change(struct phylink *, bool up); + +void phylink_start(struct phylink *); +void phylink_stop(struct phylink *); + +void phylink_ethtool_get_wol(struct phylink *, struct ethtool_wolinfo *); +int phylink_ethtool_set_wol(struct phylink *, struct ethtool_wolinfo *); + +int phylink_ethtool_ksettings_get(struct phylink *, + struct ethtool_link_ksettings *); +int phylink_ethtool_ksettings_set(struct phylink *, + const struct ethtool_link_ksettings *); +int phylink_ethtool_nway_reset(struct phylink *); +void phylink_ethtool_get_pauseparam(struct phylink *, + struct ethtool_pauseparam *); +int phylink_ethtool_set_pauseparam(struct phylink *, + struct ethtool_pauseparam *); +int phylink_init_eee(struct phylink *, bool); +int phylink_get_eee_err(struct phylink *); +int phylink_ethtool_get_eee(struct phylink *, struct ethtool_eee *); +int phylink_ethtool_set_eee(struct phylink *, struct ethtool_eee *); +int phylink_mii_ioctl(struct phylink *, struct ifreq *, int); + +#define phylink_zero(bm) \ + bitmap_zero(bm, __ETHTOOL_LINK_MODE_MASK_NBITS) +#define __phylink_do_bit(op, bm, mode) \ + op(ETHTOOL_LINK_MODE_ ## mode ## _BIT, bm) + +#define phylink_set(bm, mode) __phylink_do_bit(__set_bit, bm, mode) +#define phylink_clear(bm, mode) __phylink_do_bit(__clear_bit, bm, mode) +#define phylink_test(bm, mode) __phylink_do_bit(test_bit, bm, mode) + +void phylink_set_port_modes(unsigned long *bits); + +#endif |