diff options
Diffstat (limited to 'include/linux/mtd/rawnand.h')
| -rw-r--r-- | include/linux/mtd/rawnand.h | 126 |
1 files changed, 77 insertions, 49 deletions
diff --git a/include/linux/mtd/rawnand.h b/include/linux/mtd/rawnand.h index 3e8ec3b8a39c..efb2345359bb 100644 --- a/include/linux/mtd/rawnand.h +++ b/include/linux/mtd/rawnand.h @@ -21,11 +21,10 @@ #include <linux/mtd/mtd.h> #include <linux/mtd/flashchip.h> #include <linux/mtd/bbm.h> +#include <linux/of.h> #include <linux/types.h> -struct mtd_info; struct nand_flash_dev; -struct device_node; /* Scan and identify a NAND device */ int nand_scan_with_ids(struct mtd_info *mtd, int max_chips, @@ -36,17 +35,6 @@ static inline int nand_scan(struct mtd_info *mtd, int max_chips) return nand_scan_with_ids(mtd, max_chips, NULL); } -/* - * Separate phases of nand_scan(), allowing board driver to intervene - * and override command or ECC setup according to flash type. - */ -int nand_scan_ident(struct mtd_info *mtd, int max_chips, - struct nand_flash_dev *table); -int nand_scan_tail(struct mtd_info *mtd); - -/* Unregister the MTD device and free resources held by the NAND device */ -void nand_release(struct mtd_info *mtd); - /* Internal helper for board drivers which need to override command function */ void nand_wait_ready(struct mtd_info *mtd); @@ -121,6 +109,7 @@ enum nand_ecc_algo { NAND_ECC_UNKNOWN, NAND_ECC_HAMMING, NAND_ECC_BCH, + NAND_ECC_RS, }; /* @@ -218,6 +207,12 @@ enum nand_ecc_algo { */ #define NAND_WAIT_TCCS 0x00200000 +/* + * Whether the NAND chip is a boot medium. Drivers might use this information + * to select ECC algorithms supported by the boot ROM or similar restrictions. + */ +#define NAND_IS_BOOT_MEDIUM 0x00400000 + /* Options set by nand scan */ /* Nand scan has allocated controller struct */ #define NAND_CONTROLLER_ALLOC 0x80000000 @@ -230,6 +225,17 @@ enum nand_ecc_algo { /* Keep gcc happy */ struct nand_chip; +/* ONFI version bits */ +#define ONFI_VERSION_1_0 BIT(1) +#define ONFI_VERSION_2_0 BIT(2) +#define ONFI_VERSION_2_1 BIT(3) +#define ONFI_VERSION_2_2 BIT(4) +#define ONFI_VERSION_2_3 BIT(5) +#define ONFI_VERSION_3_0 BIT(6) +#define ONFI_VERSION_3_1 BIT(7) +#define ONFI_VERSION_3_2 BIT(8) +#define ONFI_VERSION_4_0 BIT(9) + /* ONFI features */ #define ONFI_FEATURE_16_BIT_BUS (1 << 0) #define ONFI_FEATURE_EXT_PARAM_PAGE (1 << 7) @@ -470,13 +476,13 @@ struct onfi_params { */ struct nand_parameters { /* Generic parameters */ - char model[100]; + const char *model; bool supports_set_get_features; DECLARE_BITMAP(set_feature_list, ONFI_FEATURE_NUMBER); DECLARE_BITMAP(get_feature_list, ONFI_FEATURE_NUMBER); /* ONFI parameters */ - struct onfi_params onfi; + struct onfi_params *onfi; }; /* The maximum expected count of bytes in the NAND ID sequence */ @@ -493,20 +499,42 @@ struct nand_id { }; /** - * struct nand_hw_control - Control structure for hardware controller (e.g ECC generator) shared among independent devices + * struct nand_controller_ops - Controller operations + * + * @attach_chip: this method is called after the NAND detection phase after + * flash ID and MTD fields such as erase size, page size and OOB + * size have been set up. ECC requirements are available if + * provided by the NAND chip or device tree. Typically used to + * choose the appropriate ECC configuration and allocate + * associated resources. + * This hook is optional. + * @detach_chip: free all resources allocated/claimed in + * nand_controller_ops->attach_chip(). + * This hook is optional. + */ +struct nand_controller_ops { + int (*attach_chip)(struct nand_chip *chip); + void (*detach_chip)(struct nand_chip *chip); +}; + +/** + * struct nand_controller - Structure used to describe a NAND controller + * * @lock: protection lock * @active: the mtd device which holds the controller currently * @wq: wait queue to sleep on if a NAND operation is in * progress used instead of the per chip wait queue * when a hw controller is available. + * @ops: NAND controller operations. */ -struct nand_hw_control { +struct nand_controller { spinlock_t lock; struct nand_chip *active; wait_queue_head_t wq; + const struct nand_controller_ops *ops; }; -static inline void nand_hw_control_init(struct nand_hw_control *nfc) +static inline void nand_controller_init(struct nand_controller *nfc) { nfc->active = NULL; spin_lock_init(&nfc->lock); @@ -778,11 +806,15 @@ nand_get_sdr_timings(const struct nand_data_interface *conf) * implementation) if any. * @cleanup: the ->init() function may have allocated resources, ->cleanup() * is here to let vendor specific code release those resources. + * @fixup_onfi_param_page: apply vendor specific fixups to the ONFI parameter + * page. This is called after the checksum is verified. */ struct nand_manufacturer_ops { void (*detect)(struct nand_chip *chip); int (*init)(struct nand_chip *chip); void (*cleanup)(struct nand_chip *chip); + void (*fixup_onfi_param_page)(struct nand_chip *chip, + struct nand_onfi_params *p); }; /** @@ -986,14 +1018,14 @@ struct nand_subop { unsigned int last_instr_end_off; }; -int nand_subop_get_addr_start_off(const struct nand_subop *subop, - unsigned int op_id); -int nand_subop_get_num_addr_cyc(const struct nand_subop *subop, - unsigned int op_id); -int nand_subop_get_data_start_off(const struct nand_subop *subop, - unsigned int op_id); -int nand_subop_get_data_len(const struct nand_subop *subop, - unsigned int op_id); +unsigned int nand_subop_get_addr_start_off(const struct nand_subop *subop, + unsigned int op_id); +unsigned int nand_subop_get_num_addr_cyc(const struct nand_subop *subop, + unsigned int op_id); +unsigned int nand_subop_get_data_start_off(const struct nand_subop *subop, + unsigned int op_id); +unsigned int nand_subop_get_data_len(const struct nand_subop *subop, + unsigned int op_id); /** * struct nand_op_parser_addr_constraints - Constraints for address instructions @@ -1176,9 +1208,9 @@ int nand_op_parser_exec_op(struct nand_chip *chip, * setting the read-retry mode. Mostly needed for MLC NAND. * @ecc: [BOARDSPECIFIC] ECC control structure * @buf_align: minimum buffer alignment required by a platform - * @hwcontrol: platform-specific hardware control structure + * @dummy_controller: dummy controller implementation for drivers that can + * only control a single chip * @erase: [REPLACEABLE] erase function - * @scan_bbt: [REPLACEABLE] function to scan bad block table * @chip_delay: [BOARDSPECIFIC] chip dependent delay for transferring * data from array to read regs (tR). * @state: [INTERN] the current state of the NAND device @@ -1271,7 +1303,6 @@ struct nand_chip { const struct nand_operation *op, bool check_only); int (*erase)(struct mtd_info *mtd, int page); - int (*scan_bbt)(struct mtd_info *mtd); int (*set_features)(struct mtd_info *mtd, struct nand_chip *chip, int feature_addr, uint8_t *subfeature_para); int (*get_features)(struct mtd_info *mtd, struct nand_chip *chip, @@ -1314,11 +1345,11 @@ struct nand_chip { flstate_t state; uint8_t *oob_poi; - struct nand_hw_control *controller; + struct nand_controller *controller; struct nand_ecc_ctrl ecc; unsigned long buf_align; - struct nand_hw_control hwcontrol; + struct nand_controller dummy_controller; uint8_t *bbt; struct nand_bbt_descr *bbt_td; @@ -1517,14 +1548,12 @@ extern const struct nand_manufacturer_ops micron_nand_manuf_ops; extern const struct nand_manufacturer_ops amd_nand_manuf_ops; extern const struct nand_manufacturer_ops macronix_nand_manuf_ops; -int nand_default_bbt(struct mtd_info *mtd); +int nand_create_bbt(struct nand_chip *chip); int nand_markbad_bbt(struct mtd_info *mtd, loff_t offs); int nand_isreserved_bbt(struct mtd_info *mtd, loff_t offs); int nand_isbad_bbt(struct mtd_info *mtd, loff_t offs, int allowbbt); int nand_erase_nand(struct mtd_info *mtd, struct erase_info *instr, int allowbbt); -int nand_do_read(struct mtd_info *mtd, loff_t from, size_t len, - size_t *retlen, uint8_t *buf); /** * struct platform_nand_chip - chip level device structure @@ -1555,14 +1584,12 @@ struct platform_device; * struct platform_nand_ctrl - controller level device structure * @probe: platform specific function to probe/setup hardware * @remove: platform specific function to remove/teardown hardware - * @hwcontrol: platform specific hardware control structure * @dev_ready: platform specific function to read ready/busy pin * @select_chip: platform specific chip select function * @cmd_ctrl: platform specific function for controlling * ALE/CLE/nCE. Also used to write command and address * @write_buf: platform specific function for write buffer * @read_buf: platform specific function for read buffer - * @read_byte: platform specific function to read one byte from chip * @priv: private data to transport driver specific settings * * All fields are optional and depend on the hardware driver requirements @@ -1570,13 +1597,11 @@ struct platform_device; struct platform_nand_ctrl { int (*probe)(struct platform_device *pdev); void (*remove)(struct platform_device *pdev); - void (*hwcontrol)(struct mtd_info *mtd, int cmd); int (*dev_ready)(struct mtd_info *mtd); void (*select_chip)(struct mtd_info *mtd, int chip); void (*cmd_ctrl)(struct mtd_info *mtd, int dat, unsigned int ctrl); void (*write_buf)(struct mtd_info *mtd, const uint8_t *buf, int len); void (*read_buf)(struct mtd_info *mtd, uint8_t *buf, int len); - unsigned char (*read_byte)(struct mtd_info *mtd); void *priv; }; @@ -1593,10 +1618,10 @@ struct platform_nand_data { /* return the supported asynchronous timing mode. */ static inline int onfi_get_async_timing_mode(struct nand_chip *chip) { - if (!chip->parameters.onfi.version) + if (!chip->parameters.onfi) return ONFI_TIMING_MODE_UNKNOWN; - return chip->parameters.onfi.async_timing_mode; + return chip->parameters.onfi->async_timing_mode; } int onfi_fill_data_interface(struct nand_chip *chip, @@ -1641,14 +1666,8 @@ int nand_check_erased_ecc_chunk(void *data, int datalen, void *extraoob, int extraooblen, int threshold); -int nand_check_ecc_caps(struct nand_chip *chip, - const struct nand_ecc_caps *caps, int oobavail); - -int nand_match_ecc_req(struct nand_chip *chip, - const struct nand_ecc_caps *caps, int oobavail); - -int nand_maximize_ecc(struct nand_chip *chip, - const struct nand_ecc_caps *caps, int oobavail); +int nand_ecc_choose_conf(struct nand_chip *chip, + const struct nand_ecc_caps *caps, int oobavail); /* Default write_oob implementation */ int nand_write_oob_std(struct mtd_info *mtd, struct nand_chip *chip, int page); @@ -1674,10 +1693,14 @@ int nand_get_set_features_notsupp(struct mtd_info *mtd, struct nand_chip *chip, /* Default read_page_raw implementation */ int nand_read_page_raw(struct mtd_info *mtd, struct nand_chip *chip, uint8_t *buf, int oob_required, int page); +int nand_read_page_raw_notsupp(struct mtd_info *mtd, struct nand_chip *chip, + u8 *buf, int oob_required, int page); /* Default write_page_raw implementation */ int nand_write_page_raw(struct mtd_info *mtd, struct nand_chip *chip, const uint8_t *buf, int oob_required, int page); +int nand_write_page_raw_notsupp(struct mtd_info *mtd, struct nand_chip *chip, + const u8 *buf, int oob_required, int page); /* Reset and initialize a NAND device */ int nand_reset(struct nand_chip *chip, int chipnr); @@ -1711,8 +1734,13 @@ int nand_read_data_op(struct nand_chip *chip, void *buf, unsigned int len, int nand_write_data_op(struct nand_chip *chip, const void *buf, unsigned int len, bool force_8bit); -/* Free resources held by the NAND device */ +/* + * Free resources held by the NAND device, must be called on error after a + * sucessful nand_scan(). + */ void nand_cleanup(struct nand_chip *chip); +/* Unregister the MTD device and calls nand_cleanup() */ +void nand_release(struct mtd_info *mtd); /* Default extended ID decoding function */ void nand_decode_ext_id(struct nand_chip *chip); |