diff options
Diffstat (limited to 'include/drm/drm_dsc.h')
| -rw-r--r-- | include/drm/drm_dsc.h | 233 |
1 files changed, 178 insertions, 55 deletions
diff --git a/include/drm/drm_dsc.h b/include/drm/drm_dsc.h index d03f1b83421a..9c26f083c70f 100644 --- a/include/drm/drm_dsc.h +++ b/include/drm/drm_dsc.h @@ -44,111 +44,231 @@ #define DSC_1_2_MAX_LINEBUF_DEPTH_VAL 0 #define DSC_1_1_MAX_LINEBUF_DEPTH_BITS 13 -/* Configuration for a single Rate Control model range */ +/** + * struct drm_dsc_rc_range_parameters - DSC Rate Control range parameters + * + * This defines different rate control parameters used by the DSC engine + * to compress the frame. + */ struct drm_dsc_rc_range_parameters { - /* Min Quantization Parameters allowed for this range */ + /** + * @range_min_qp: Min Quantization Parameters allowed for this range + */ u8 range_min_qp; - /* Max Quantization Parameters allowed for this range */ + /** + * @range_max_qp: Max Quantization Parameters allowed for this range + */ u8 range_max_qp; - /* Bits/group offset to apply to target for this group */ + /** + * @range_bpg_offset: + * Bits/group offset to apply to target for this group + */ u8 range_bpg_offset; }; +/** + * struct drm_dsc_config - Parameters required to configure DSC + * + * Driver populates this structure with all the parameters required + * to configure the display stream compression on the source. + */ struct drm_dsc_config { - /* Bits / component for previous reconstructed line buffer */ + /** + * @line_buf_depth: + * Bits per component for previous reconstructed line buffer + */ u8 line_buf_depth; - /* Bits per component to code (must be 8, 10, or 12) */ + /** + * @bits_per_component: Bits per component to code (8/10/12) + */ u8 bits_per_component; - /* - * Flag indicating to do RGB - YCoCg conversion - * and back (should be 1 for RGB input) + /** + * @convert_rgb: + * Flag to indicate if RGB - YCoCg conversion is needed + * True if RGB input, False if YCoCg input */ bool convert_rgb; + /** + * @slice_count: Number fo slices per line used by the DSC encoder + */ u8 slice_count; - /* Slice Width */ + /** + * @slice_width: Width of each slice in pixels + */ u16 slice_width; - /* Slice Height */ + /** + * @slice_height: Slice height in pixels + */ u16 slice_height; - /* - * 4:2:2 enable mode (from PPS, 4:2:2 conversion happens - * outside of DSC encode/decode algorithm) + /** + * @enable422: True for 4_2_2 sampling, false for 4_4_4 sampling */ bool enable422; - /* Picture Width */ + /** + * @pic_width: Width of the input display frame in pixels + */ u16 pic_width; - /* Picture Height */ + /** + * @pic_height: Vertical height of the input display frame + */ u16 pic_height; - /* Offset to bits/group used by RC to determine QP adjustment */ + /** + * @rc_tgt_offset_high: + * Offset to bits/group used by RC to determine QP adjustment + */ u8 rc_tgt_offset_high; - /* Offset to bits/group used by RC to determine QP adjustment */ + /** + * @rc_tgt_offset_low: + * Offset to bits/group used by RC to determine QP adjustment + */ u8 rc_tgt_offset_low; - /* Bits/pixel target << 4 (ie., 4 fractional bits) */ + /** + * @bits_per_pixel: + * Target bits per pixel with 4 fractional bits, bits_per_pixel << 4 + */ u16 bits_per_pixel; - /* - * Factor to determine if an edge is present based - * on the bits produced + /** + * @rc_edge_factor: + * Factor to determine if an edge is present based on the bits produced */ u8 rc_edge_factor; - /* Slow down incrementing once the range reaches this value */ + /** + * @rc_quant_incr_limit1: + * Slow down incrementing once the range reaches this value + */ u8 rc_quant_incr_limit1; - /* Slow down incrementing once the range reaches this value */ + /** + * @rc_quant_incr_limit0: + * Slow down incrementing once the range reaches this value + */ u8 rc_quant_incr_limit0; - /* Number of pixels to delay the initial transmission */ + /** + * @initial_xmit_delay: + * Number of pixels to delay the initial transmission + */ u16 initial_xmit_delay; - /* Number of pixels to delay the VLD on the decoder,not including SSM */ + /** + * @initial_dec_delay: + * Initial decoder delay, number of pixel times that the decoder + * accumulates data in its rate buffer before starting to decode + * and output pixels. + */ u16 initial_dec_delay; - /* Block prediction enable */ + /** + * @block_pred_enable: + * True if block prediction is used to code any groups within the + * picture. False if BP not used + */ bool block_pred_enable; - /* Bits/group offset to use for first line of the slice */ + /** + * @first_line_bpg_offset: + * Number of additional bits allocated for each group on the first + * line of slice. + */ u8 first_line_bpg_offset; - /* Value to use for RC model offset at slice start */ + /** + * @initial_offset: Value to use for RC model offset at slice start + */ u16 initial_offset; - /* Thresholds defining each of the buffer ranges */ + /** + * @rc_buf_thresh: Thresholds defining each of the buffer ranges + */ u16 rc_buf_thresh[DSC_NUM_BUF_RANGES - 1]; - /* Parameters for each of the RC ranges */ + /** + * @rc_range_params: + * Parameters for each of the RC ranges defined in + * &struct drm_dsc_rc_range_parameters + */ struct drm_dsc_rc_range_parameters rc_range_params[DSC_NUM_BUF_RANGES]; - /* Total size of RC model */ + /** + * @rc_model_size: Total size of RC model + */ u16 rc_model_size; - /* Minimum QP where flatness information is sent */ + /** + * @flatness_min_qp: Minimum QP where flatness information is sent + */ u8 flatness_min_qp; - /* Maximum QP where flatness information is sent */ + /** + * @flatness_max_qp: Maximum QP where flatness information is sent + */ u8 flatness_max_qp; - /* Initial value for scale factor */ + /** + * @initial_scale_value: Initial value for the scale factor + */ u8 initial_scale_value; - /* Decrement scale factor every scale_decrement_interval groups */ + /** + * @scale_decrement_interval: + * Specifies number of group times between decrementing the scale factor + * at beginning of a slice. + */ u16 scale_decrement_interval; - /* Increment scale factor every scale_increment_interval groups */ + /** + * @scale_increment_interval: + * Number of group times between incrementing the scale factor value + * used at the beginning of a slice. + */ u16 scale_increment_interval; - /* Non-first line BPG offset to use */ + /** + * @nfl_bpg_offset: Non first line BPG offset to be used + */ u16 nfl_bpg_offset; - /* BPG offset used to enforce slice bit */ + /** + * @slice_bpg_offset: BPG offset used to enforce slice bit + */ u16 slice_bpg_offset; - /* Final RC linear transformation offset value */ + /** + * @final_offset: Final RC linear transformation offset value + */ u16 final_offset; - /* Enable on-off VBR (ie., disable stuffing bits) */ + /** + * @vbr_enable: True if VBR mode is enabled, false if disabled + */ bool vbr_enable; - /* Mux word size (in bits) for SSM mode */ + /** + * @mux_word_size: Mux word size (in bits) for SSM mode + */ u8 mux_word_size; - /* - * The (max) size in bytes of the "chunks" that are - * used in slice multiplexing + /** + * @slice_chunk_size: + * The (max) size in bytes of the "chunks" that are used in slice + * multiplexing. */ u16 slice_chunk_size; - /* Rate Control buffer siz in bits */ + /** + * @rc_bits: Rate control buffer size in bits + */ u16 rc_bits; - /* DSC Minor Version */ + /** + * @dsc_version_minor: DSC minor version + */ u8 dsc_version_minor; - /* DSC Major version */ + /** + * @dsc_version_major: DSC major version + */ u8 dsc_version_major; - /* Native 4:2:2 support */ + /** + * @native_422: True if Native 4:2:2 supported, else false + */ bool native_422; - /* Native 4:2:0 support */ + /** + * @native_420: True if Native 4:2:0 supported else false. + */ bool native_420; - /* Additional bits/grp for seconnd line of slice for native 4:2:0 */ + /** + * @second_line_bpg_offset: + * Additional bits/grp for seconnd line of slice for native 4:2:0 + */ u8 second_line_bpg_offset; - /* Num of bits deallocated for each grp that is not in second line of slice */ + /** + * @nsl_bpg_offset: + * Num of bits deallocated for each grp that is not in second line of + * slice + */ u16 nsl_bpg_offset; - /* Offset adj fr second line in Native 4:2:0 mode */ + /** + * @second_line_offset_adj: + * Offset adjustment for second line in Native 4:2:0 mode + */ u16 second_line_offset_adj; }; @@ -468,10 +588,13 @@ struct drm_dsc_picture_parameter_set { * This structure represents the DSC PPS infoframe required to send the Picture * Parameter Set metadata required before enabling VESA Display Stream * Compression. This is based on the DP Secondary Data Packet structure and - * comprises of SDP Header as defined in drm_dp_helper.h and PPS payload. + * comprises of SDP Header as defined &struct struct dp_sdp_header in drm_dp_helper.h + * and PPS payload defined in &struct drm_dsc_picture_parameter_set. * - * @pps_header: Header for PPS as per DP SDP header format + * @pps_header: Header for PPS as per DP SDP header format of type + * &struct dp_sdp_header * @pps_payload: PPS payload fields as per DSC specification Table 4-1 + * as represented in &struct drm_dsc_picture_parameter_set */ struct drm_dsc_pps_infoframe { struct dp_sdp_header pps_header; |