diff options
Diffstat (limited to 'include/asm-blackfin/mach-bf561/anomaly.h')
| -rw-r--r-- | include/asm-blackfin/mach-bf561/anomaly.h | 184 |
1 files changed, 184 insertions, 0 deletions
diff --git a/include/asm-blackfin/mach-bf561/anomaly.h b/include/asm-blackfin/mach-bf561/anomaly.h new file mode 100644 index 000000000000..f5b32d66517d --- /dev/null +++ b/include/asm-blackfin/mach-bf561/anomaly.h @@ -0,0 +1,184 @@ + +/* + * File: include/asm-blackfin/mach-bf561/anomaly.h + * Based on: + * Author: + * + * Created: + * Description: + * + * Rev: + * + * Modified: + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. + * If not, write to the Free Software Foundation, + * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +/* This file shoule be up to date with: + * - Revision L, 10Aug2006; ADSP-BF561 Silicon Anomaly List + */ + +#ifndef _MACH_ANOMALY_H_ +#define _MACH_ANOMALY_H_ + +/* We do not support 0.1 or 0.4 silicon - sorry */ +#if (defined(CONFIG_BF_REV_0_1) || defined(CONFIG_BF_REV_0_2) || defined(CONFIG_BF_REV_0_4)) +#error Kernel will not work on BF561 Version 0.1, 0.2, or 0.4 +#endif + +/* Issues that are common to 0.5 and 0.3 silicon */ +#if (defined(CONFIG_BF_REV_0_5) || defined(CONFIG_BF_REV_0_3)) +#define ANOMALY_05000074 /* A multi issue instruction with dsp32shiftimm in + slot1 and store of a P register in slot 2 is not + supported */ +#define ANOMALY_05000099 /* UART Line Status Register (UART_LSR) bits are not + updated at the same time. */ +#define ANOMALY_05000120 /* Testset instructions restricted to 32-bit aligned + memory locations */ +#define ANOMALY_05000122 /* Rx.H cannot be used to access 16-bit System MMR + registers */ +#define ANOMALY_05000127 /* Signbits instruction not functional under certain + conditions */ +#define ANOMALY_05000149 /* IMDMA S1/D1 channel may stall */ +#define ANOMALY_05000166 /* PPI Data Lengths Between 8 and 16 do not zero out + upper bits */ +#define ANOMALY_05000167 /* Turning Serial Ports on With External Frame Syncs */ +#define ANOMALY_05000180 /* PPI_DELAY not functional in PPI modes with 0 frame + syncs */ +#define ANOMALY_05000182 /* IMDMA does not operate to full speed for 600MHz + and higher devices */ +#define ANOMALY_05000187 /* IMDMA Corrupted Data after a Halt */ +#define ANOMALY_05000190 /* PPI not functional at core voltage < 1Volt */ +#define ANOMALY_05000208 /* VSTAT status bit in PLL_STAT register is not + functional */ +#define ANOMALY_05000245 /* Spurious Hardware Error from an access in the + shadow of a conditional branch */ +#define ANOMALY_05000257 /* Interrupt/Exception during short hardware loop + may cause bad instruction fetches */ +#define ANOMALY_05000265 /* Sensitivity to noise with slow input edge rates on + external SPORT TX and RX clocks */ +#define ANOMALY_05000267 /* IMDMA may corrupt data under certain conditions */ +#define ANOMALY_05000269 /* High I/O activity causes output voltage of internal + voltage regulator (VDDint) to increase */ +#define ANOMALY_05000270 /* High I/O activity causes output voltage of internal + voltage regulator (VDDint) to decrease */ +#define ANOMALY_05000272 /* Certain data cache write through modes fail for + VDDint <=0.9V */ +#define ANOMALY_05000274 /* Data cache write back to external synchronous memory + may be lost */ +#define ANOMALY_05000275 /* PPI Timing and sampling informaton updates */ +#define ANOMALY_05000312 /* Errors when SSYNC, CSYNC, or loads to LT, LB and LC + registers are interrupted */ + +#endif /* (defined(CONFIG_BF_REV_0_5) || defined(CONFIG_BF_REV_0_3)) */ + +#if (defined(CONFIG_BF_REV_0_5)) +#define ANOMALY_05000254 /* Incorrect Timer Pulse Width in Single-Shot PWM_OUT + mode with external clock */ +#define ANOMALY_05000266 /* IMDMA destination IRQ status must be read prior to + using IMDMA */ +#endif + +#if (defined(CONFIG_BF_REV_0_3)) +#define ANOMALY_05000156 /* Timers in PWM-Out Mode with PPI GP Receive (Input) + Mode with 0 Frame Syncs */ +#define ANOMALY_05000168 /* SDRAM auto-refresh and subsequent Power Ups */ +#define ANOMALY_05000169 /* DATA CPLB page miss can result in lost write-through + cache data writes */ +#define ANOMALY_05000171 /* Boot-ROM code modifies SICA_IWRx wakeup registers */ +#define ANOMALY_05000174 /* Cache Fill Buffer Data lost */ +#define ANOMALY_05000175 /* Overlapping Sequencer and Memory Stalls */ +#define ANOMALY_05000176 /* Multiplication of (-1) by (-1) followed by an + accumulator saturation */ +#define ANOMALY_05000179 /* PPI_COUNT cannot be programmed to 0 in General + Purpose TX or RX modes */ +#define ANOMALY_05000181 /* Disabling the PPI resets the PPI configuration + registers */ +#define ANOMALY_05000184 /* Timer Pin limitations for PPI TX Modes with + External Frame Syncs */ +#define ANOMALY_05000185 /* PPI TX Mode with 2 External Frame Syncs */ +#define ANOMALY_05000186 /* PPI packing with Data Length greater than 8 bits + (not a meaningful mode) */ +#define ANOMALY_05000188 /* IMDMA Restrictions on Descriptor and Buffer + Placement in Memory */ +#define ANOMALY_05000189 /* False Protection Exception */ +#define ANOMALY_05000193 /* False Flag Pin Interrupts on Edge Sensitive Inputs + when polarity setting is changed */ +#define ANOMALY_05000194 /* Restarting SPORT in specific modes may cause data + corruption */ +#define ANOMALY_05000198 /* Failing MMR accesses when stalled by preceding + memory read */ +#define ANOMALY_05000199 /* DMA current address shows wrong value during carry + fix */ +#define ANOMALY_05000200 /* SPORT TFS and DT are incorrectly driven during + inactive channels in certain conditions */ +#define ANOMALY_05000202 /* Possible infinite stall with specific dual-DAG + situation */ +#define ANOMALY_05000204 /* Incorrect data read with write-through cache and + allocate cache lines on reads only mode */ +#define ANOMALY_05000205 /* Specific sequence that can cause DMA error or DMA + stopping */ +#define ANOMALY_05000207 /* Recovery from "brown-out" condition */ +#define ANOMALY_05000209 /* Speed-Path in computational unit affects certain + instructions */ +#define ANOMALY_05000215 /* UART TX Interrupt masked erroneously */ +#define ANOMALY_05000219 /* NMI event at boot time results in unpredictable + state */ +#define ANOMALY_05000220 /* Data Corruption with Cached External Memory and + Non-Cached On-Chip L2 Memory */ +#define ANOMALY_05000225 /* Incorrect pulse-width of UART start-bit */ +#define ANOMALY_05000227 /* Scratchpad memory bank reads may return incorrect + data */ +#define ANOMALY_05000230 /* UART Receiver is less robust against Baudrate + Differences in certain Conditions */ +#define ANOMALY_05000231 /* UART STB bit incorrectly affects receiver setting */ +#define ANOMALY_05000232 /* SPORT data transmit lines are incorrectly driven in + multichannel mode */ +#define ANOMALY_05000242 /* DF bit in PLL_CTL register does not respond to + hardware reset */ +#define ANOMALY_05000244 /* If i-cache is on, CSYNC/SSYNC/IDLE around Change of + Control causes failures */ +#define ANOMALY_05000248 /* TESTSET operation forces stall on the other core */ +#define ANOMALY_05000250 /* Incorrect Bit-Shift of Data Word in Multichannel + (TDM) mode in certain conditions */ +#define ANOMALY_05000251 /* Exception not generated for MMR accesses in + reserved region */ +#define ANOMALY_05000253 /* Maximum external clock speed for Timers */ +#define ANOMALY_05000258 /* Instruction Cache is corrupted when bits 9 and 12 + of the ICPLB Data registers differ */ +#define ANOMALY_05000260 /* ICPLB_STATUS MMR register may be corrupted */ +#define ANOMALY_05000261 /* DCPLB_FAULT_ADDR MMR register may be corrupted */ +#define ANOMALY_05000262 /* Stores to data cache may be lost */ +#define ANOMALY_05000263 /* Hardware loop corrupted when taking an ICPLB + exception */ +#define ANOMALY_05000264 /* CSYNC/SSYNC/IDLE causes infinite stall in second + to last instruction in hardware loop */ +#define ANOMALY_05000276 /* Timing requirements change for External Frame + Sync PPI Modes with non-zero PPI_DELAY */ +#define ANOMALY_05000278 /* Disabling Peripherals with DMA running may cause + DMA system instability */ +#define ANOMALY_05000281 /* False Hardware Error Exception when ISR context is + not restored */ +#define ANOMALY_05000283 /* An MMR write is stalled indefinitely when killed + in a particular stage */ +#define ANOMALY_05000287 /* A read will receive incorrect data under certain + conditions */ +#define ANOMALY_05000288 /* SPORTs may receive bad data if FIFOs fill up */ +#endif + +#endif /* _MACH_ANOMALY_H_ */ |