diff options
Diffstat (limited to 'include/asm-arm')
| -rw-r--r-- | include/asm-arm/arch-omap/control.h | 191 | ||||
| -rw-r--r-- | include/asm-arm/arch-omap/sdrc.h | 75 | ||||
| -rw-r--r-- | include/asm-arm/arch-omap/usb.h | 5 |
3 files changed, 267 insertions, 4 deletions
diff --git a/include/asm-arm/arch-omap/control.h b/include/asm-arm/arch-omap/control.h new file mode 100644 index 000000000000..9944bb5d5330 --- /dev/null +++ b/include/asm-arm/arch-omap/control.h @@ -0,0 +1,191 @@ +#ifndef __ASM_ARCH_CONTROL_H +#define __ASM_ARCH_CONTROL_H + +/* + * include/asm-arm/arch-omap/control.h + * + * OMAP2/3 System Control Module definitions + * + * Copyright (C) 2007 Texas Instruments, Inc. + * Copyright (C) 2007 Nokia Corporation + * + * Written by Paul Walmsley + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation. + */ + +#include <asm/arch/io.h> + +#define OMAP242X_CTRL_REGADDR(reg) \ + (void __iomem *)IO_ADDRESS(OMAP242X_CTRL_BASE + (reg)) +#define OMAP243X_CTRL_REGADDR(reg) \ + (void __iomem *)IO_ADDRESS(OMAP243X_CTRL_BASE + (reg)) +#define OMAP343X_CTRL_REGADDR(reg) \ + (void __iomem *)IO_ADDRESS(OMAP343X_CTRL_BASE + (reg)) + +/* + * As elsewhere, the "OMAP2_" prefix indicates that the macro is valid for + * OMAP24XX and OMAP34XX. + */ + +/* Control submodule offsets */ + +#define OMAP2_CONTROL_INTERFACE 0x000 +#define OMAP2_CONTROL_PADCONFS 0x030 +#define OMAP2_CONTROL_GENERAL 0x270 +#define OMAP343X_CONTROL_MEM_WKUP 0x600 +#define OMAP343X_CONTROL_PADCONFS_WKUP 0xa00 +#define OMAP343X_CONTROL_GENERAL_WKUP 0xa60 + +/* Control register offsets - read/write with omap_ctrl_{read,write}{bwl}() */ + +#define OMAP2_CONTROL_SYSCONFIG (OMAP2_CONTROL_INTERFACE + 0x10) + +/* CONTROL_GENERAL register offsets common to OMAP2 & 3 */ +#define OMAP2_CONTROL_DEVCONF0 (OMAP2_CONTROL_GENERAL + 0x0004) +#define OMAP2_CONTROL_MSUSPENDMUX_0 (OMAP2_CONTROL_GENERAL + 0x0020) +#define OMAP2_CONTROL_MSUSPENDMUX_1 (OMAP2_CONTROL_GENERAL + 0x0024) +#define OMAP2_CONTROL_MSUSPENDMUX_2 (OMAP2_CONTROL_GENERAL + 0x0028) +#define OMAP2_CONTROL_MSUSPENDMUX_3 (OMAP2_CONTROL_GENERAL + 0x002c) +#define OMAP2_CONTROL_MSUSPENDMUX_4 (OMAP2_CONTROL_GENERAL + 0x0030) +#define OMAP2_CONTROL_MSUSPENDMUX_5 (OMAP2_CONTROL_GENERAL + 0x0034) +#define OMAP2_CONTROL_SEC_CTRL (OMAP2_CONTROL_GENERAL + 0x0040) +#define OMAP2_CONTROL_RPUB_KEY_H_0 (OMAP2_CONTROL_GENERAL + 0x0090) +#define OMAP2_CONTROL_RPUB_KEY_H_1 (OMAP2_CONTROL_GENERAL + 0x0094) +#define OMAP2_CONTROL_RPUB_KEY_H_2 (OMAP2_CONTROL_GENERAL + 0x0098) +#define OMAP2_CONTROL_RPUB_KEY_H_3 (OMAP2_CONTROL_GENERAL + 0x009c) + +/* 242x-only CONTROL_GENERAL register offsets */ +#define OMAP242X_CONTROL_DEVCONF OMAP2_CONTROL_DEVCONF0 /* match TRM */ +#define OMAP242X_CONTROL_OCM_RAM_PERM (OMAP2_CONTROL_GENERAL + 0x0068) + +/* 243x-only CONTROL_GENERAL register offsets */ +/* CONTROL_IVA2_BOOT{ADDR,MOD} are at the same place on 343x - noted below */ +#define OMAP243X_CONTROL_DEVCONF1 (OMAP2_CONTROL_GENERAL + 0x0078) +#define OMAP243X_CONTROL_CSIRXFE (OMAP2_CONTROL_GENERAL + 0x007c) +#define OMAP243X_CONTROL_IVA2_BOOTADDR (OMAP2_CONTROL_GENERAL + 0x0190) +#define OMAP243X_CONTROL_IVA2_BOOTMOD (OMAP2_CONTROL_GENERAL + 0x0194) +#define OMAP243X_CONTROL_IVA2_GEMCFG (OMAP2_CONTROL_GENERAL + 0x0198) + +/* 24xx-only CONTROL_GENERAL register offsets */ +#define OMAP24XX_CONTROL_DEBOBS (OMAP2_CONTROL_GENERAL + 0x0000) +#define OMAP24XX_CONTROL_EMU_SUPPORT (OMAP2_CONTROL_GENERAL + 0x0008) +#define OMAP24XX_CONTROL_SEC_TEST (OMAP2_CONTROL_GENERAL + 0x0044) +#define OMAP24XX_CONTROL_PSA_CTRL (OMAP2_CONTROL_GENERAL + 0x0048) +#define OMAP24XX_CONTROL_PSA_CMD (OMAP2_CONTROL_GENERAL + 0x004c) +#define OMAP24XX_CONTROL_PSA_VALUE (OMAP2_CONTROL_GENERAL + 0x0050) +#define OMAP24XX_CONTROL_SEC_EMU (OMAP2_CONTROL_GENERAL + 0x0060) +#define OMAP24XX_CONTROL_SEC_TAP (OMAP2_CONTROL_GENERAL + 0x0064) +#define OMAP24XX_CONTROL_OCM_PUB_RAM_ADD (OMAP2_CONTROL_GENERAL + 0x006c) +#define OMAP24XX_CONTROL_EXT_SEC_RAM_START_ADD (OMAP2_CONTROL_GENERAL + 0x0070) +#define OMAP24XX_CONTROL_EXT_SEC_RAM_STOP_ADD (OMAP2_CONTROL_GENERAL + 0x0074 +#define OMAP24XX_CONTROL_SEC_STATUS (OMAP2_CONTROL_GENERAL + 0x0080) +#define OMAP24XX_CONTROL_SEC_ERR_STATUS (OMAP2_CONTROL_GENERAL + 0x0084) +#define OMAP24XX_CONTROL_STATUS (OMAP2_CONTROL_GENERAL + 0x0088) +#define OMAP24XX_CONTROL_GENERAL_PURPOSE_STATUS (OMAP2_CONTROL_GENERAL + 0x008c) +#define OMAP24XX_CONTROL_RAND_KEY_0 (OMAP2_CONTROL_GENERAL + 0x00a0) +#define OMAP24XX_CONTROL_RAND_KEY_1 (OMAP2_CONTROL_GENERAL + 0x00a4) +#define OMAP24XX_CONTROL_RAND_KEY_2 (OMAP2_CONTROL_GENERAL + 0x00a8) +#define OMAP24XX_CONTROL_RAND_KEY_3 (OMAP2_CONTROL_GENERAL + 0x00ac) +#define OMAP24XX_CONTROL_CUST_KEY_0 (OMAP2_CONTROL_GENERAL + 0x00b0) +#define OMAP24XX_CONTROL_CUST_KEY_1 (OMAP2_CONTROL_GENERAL + 0x00b4) +#define OMAP24XX_CONTROL_TEST_KEY_0 (OMAP2_CONTROL_GENERAL + 0x00c0) +#define OMAP24XX_CONTROL_TEST_KEY_1 (OMAP2_CONTROL_GENERAL + 0x00c4) +#define OMAP24XX_CONTROL_TEST_KEY_2 (OMAP2_CONTROL_GENERAL + 0x00c8) +#define OMAP24XX_CONTROL_TEST_KEY_3 (OMAP2_CONTROL_GENERAL + 0x00cc) +#define OMAP24XX_CONTROL_TEST_KEY_4 (OMAP2_CONTROL_GENERAL + 0x00d0) +#define OMAP24XX_CONTROL_TEST_KEY_5 (OMAP2_CONTROL_GENERAL + 0x00d4) +#define OMAP24XX_CONTROL_TEST_KEY_6 (OMAP2_CONTROL_GENERAL + 0x00d8) +#define OMAP24XX_CONTROL_TEST_KEY_7 (OMAP2_CONTROL_GENERAL + 0x00dc) +#define OMAP24XX_CONTROL_TEST_KEY_8 (OMAP2_CONTROL_GENERAL + 0x00e0) +#define OMAP24XX_CONTROL_TEST_KEY_9 (OMAP2_CONTROL_GENERAL + 0x00e4) + +/* 34xx-only CONTROL_GENERAL register offsets */ +#define OMAP343X_CONTROL_PADCONF_OFF (OMAP2_CONTROL_GENERAL + 0x0000) +#define OMAP343X_CONTROL_MEM_DFTRW0 (OMAP2_CONTROL_GENERAL + 0x0008) +#define OMAP343X_CONTROL_MEM_DFTRW1 (OMAP2_CONTROL_GENERAL + 0x000c) +#define OMAP343X_CONTROL_DEVCONF1 (OMAP2_CONTROL_GENERAL + 0x0068) +#define OMAP343X_CONTROL_CSIRXFE (OMAP2_CONTROL_GENERAL + 0x006c) +#define OMAP343X_CONTROL_SEC_STATUS (OMAP2_CONTROL_GENERAL + 0x0070) +#define OMAP343X_CONTROL_SEC_ERR_STATUS (OMAP2_CONTROL_GENERAL + 0x0074) +#define OMAP343X_CONTROL_SEC_ERR_STATUS_DEBUG (OMAP2_CONTROL_GENERAL + 0x0078) +#define OMAP343X_CONTROL_STATUS (OMAP2_CONTROL_GENERAL + 0x0080) +#define OMAP343X_CONTROL_GENERAL_PURPOSE_STATUS (OMAP2_CONTROL_GENERAL + 0x0084) +#define OMAP343X_CONTROL_RPUB_KEY_H_4 (OMAP2_CONTROL_GENERAL + 0x00a0) +#define OMAP343X_CONTROL_RAND_KEY_0 (OMAP2_CONTROL_GENERAL + 0x00a8) +#define OMAP343X_CONTROL_RAND_KEY_1 (OMAP2_CONTROL_GENERAL + 0x00ac) +#define OMAP343X_CONTROL_RAND_KEY_2 (OMAP2_CONTROL_GENERAL + 0x00b0) +#define OMAP343X_CONTROL_RAND_KEY_3 (OMAP2_CONTROL_GENERAL + 0x00b4) +#define OMAP343X_CONTROL_TEST_KEY_0 (OMAP2_CONTROL_GENERAL + 0x00c8) +#define OMAP343X_CONTROL_TEST_KEY_1 (OMAP2_CONTROL_GENERAL + 0x00cc) +#define OMAP343X_CONTROL_TEST_KEY_2 (OMAP2_CONTROL_GENERAL + 0x00d0) +#define OMAP343X_CONTROL_TEST_KEY_3 (OMAP2_CONTROL_GENERAL + 0x00d4) +#define OMAP343X_CONTROL_TEST_KEY_4 (OMAP2_CONTROL_GENERAL + 0x00d8) +#define OMAP343X_CONTROL_TEST_KEY_5 (OMAP2_CONTROL_GENERAL + 0x00dc) +#define OMAP343X_CONTROL_TEST_KEY_6 (OMAP2_CONTROL_GENERAL + 0x00e0) +#define OMAP343X_CONTROL_TEST_KEY_7 (OMAP2_CONTROL_GENERAL + 0x00e4) +#define OMAP343X_CONTROL_TEST_KEY_8 (OMAP2_CONTROL_GENERAL + 0x00e8) +#define OMAP343X_CONTROL_TEST_KEY_9 (OMAP2_CONTROL_GENERAL + 0x00ec) +#define OMAP343X_CONTROL_TEST_KEY_10 (OMAP2_CONTROL_GENERAL + 0x00f0) +#define OMAP343X_CONTROL_TEST_KEY_11 (OMAP2_CONTROL_GENERAL + 0x00f4) +#define OMAP343X_CONTROL_TEST_KEY_12 (OMAP2_CONTROL_GENERAL + 0x00f8) +#define OMAP343X_CONTROL_TEST_KEY_13 (OMAP2_CONTROL_GENERAL + 0x00fc) +#define OMAP343X_CONTROL_IVA2_BOOTADDR (OMAP2_CONTROL_GENERAL + 0x0190) +#define OMAP343X_CONTROL_IVA2_BOOTMOD (OMAP2_CONTROL_GENERAL + 0x0194) + +/* + * REVISIT: This list of registers is not comprehensive - there are more + * that should be added. + */ + +/* + * Control module register bit defines - these should eventually go into + * their own regbits file. Some of these will be complicated, depending + * on the device type (general-purpose, emulator, test, secure, bad, other) + * and the security mode (secure, non-secure, don't care) + */ +/* CONTROL_DEVCONF0 bits */ +#define OMAP24XX_USBSTANDBYCTRL (1 << 15) +#define OMAP2_MCBSP2_CLKS_MASK (1 << 6) +#define OMAP2_MCBSP1_CLKS_MASK (1 << 2) + +/* CONTROL_DEVCONF1 bits */ +#define OMAP2_MCBSP5_CLKS_MASK (1 << 4) /* > 242x */ +#define OMAP2_MCBSP4_CLKS_MASK (1 << 2) /* > 242x */ +#define OMAP2_MCBSP3_CLKS_MASK (1 << 0) /* > 242x */ + +/* CONTROL_STATUS bits */ +#define OMAP2_DEVICETYPE_MASK (0x7 << 8) +#define OMAP2_SYSBOOT_5_MASK (1 << 5) +#define OMAP2_SYSBOOT_4_MASK (1 << 4) +#define OMAP2_SYSBOOT_3_MASK (1 << 3) +#define OMAP2_SYSBOOT_2_MASK (1 << 2) +#define OMAP2_SYSBOOT_1_MASK (1 << 1) +#define OMAP2_SYSBOOT_0_MASK (1 << 0) + +#ifndef __ASSEMBLY__ +#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) +extern void omap_ctrl_base_set(u32 base); +extern u32 omap_ctrl_base_get(void); +extern u8 omap_ctrl_readb(u16 offset); +extern u16 omap_ctrl_readw(u16 offset); +extern u32 omap_ctrl_readl(u16 offset); +extern void omap_ctrl_writeb(u8 val, u16 offset); +extern void omap_ctrl_writew(u16 val, u16 offset); +extern void omap_ctrl_writel(u32 val, u16 offset); +#else +#define omap_ctrl_base_set(x) WARN_ON(1) +#define omap_ctrl_base_get() 0 +#define omap_ctrl_readb(x) 0 +#define omap_ctrl_readw(x) 0 +#define omap_ctrl_readl(x) 0 +#define omap_ctrl_writeb(x, y) WARN_ON(1) +#define omap_ctrl_writew(x, y) WARN_ON(1) +#define omap_ctrl_writel(x, y) WARN_ON(1) +#endif +#endif /* __ASSEMBLY__ */ + +#endif /* __ASM_ARCH_CONTROL_H */ + diff --git a/include/asm-arm/arch-omap/sdrc.h b/include/asm-arm/arch-omap/sdrc.h new file mode 100644 index 000000000000..673b3965befc --- /dev/null +++ b/include/asm-arm/arch-omap/sdrc.h @@ -0,0 +1,75 @@ +#ifndef ____ASM_ARCH_SDRC_H +#define ____ASM_ARCH_SDRC_H + +/* + * OMAP2/3 SDRC/SMS register definitions + * + * Copyright (C) 2007 Texas Instruments, Inc. + * Copyright (C) 2007 Nokia Corporation + * + * Written by Paul Walmsley + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <asm/arch/io.h> + +/* SDRC register offsets - read/write with sdrc_{read,write}_reg() */ + +#define SDRC_SYSCONFIG 0x010 +#define SDRC_DLLA_CTRL 0x060 +#define SDRC_DLLA_STATUS 0x064 +#define SDRC_DLLB_CTRL 0x068 +#define SDRC_DLLB_STATUS 0x06C +#define SDRC_POWER 0x070 +#define SDRC_MR_0 0x084 +#define SDRC_RFR_CTRL_0 0x0a4 + +/* + * These values represent the number of memory clock cycles between + * autorefresh initiation. They assume 1 refresh per 64 ms (JEDEC), 8192 + * rows per device, and include a subtraction of a 50 cycle window in the + * event that the autorefresh command is delayed due to other SDRC activity. + * The '| 1' sets the ARE field to send one autorefresh when the autorefresh + * counter reaches 0. + * + * These represent optimal values for common parts, it won't work for all. + * As long as you scale down, most parameters are still work, they just + * become sub-optimal. The RFR value goes in the opposite direction. If you + * don't adjust it down as your clock period increases the refresh interval + * will not be met. Setting all parameters for complete worst case may work, + * but may cut memory performance by 2x. Due to errata the DLLs need to be + * unlocked and their value needs run time calibration. A dynamic call is + * need for that as no single right value exists acorss production samples. + * + * Only the FULL speed values are given. Current code is such that rate + * changes must be made at DPLLoutx2. The actual value adjustment for low + * frequency operation will be handled by omap_set_performance() + * + * By having the boot loader boot up in the fastest L4 speed available likely + * will result in something which you can switch between. + */ +#define SDRC_RFR_CTRL_165MHz (0x00044c00 | 1) +#define SDRC_RFR_CTRL_133MHz (0x0003de00 | 1) +#define SDRC_RFR_CTRL_100MHz (0x0002da01 | 1) +#define SDRC_RFR_CTRL_110MHz (0x0002da01 | 1) /* Need to calc */ +#define SDRC_RFR_CTRL_BYPASS (0x00005000 | 1) /* Need to calc */ + + +/* + * SMS register access + */ + + +#define OMAP242X_SMS_REGADDR(reg) (void __iomem *)IO_ADDRESS(OMAP2420_SMS_BASE + reg) +#define OMAP243X_SMS_REGADDR(reg) (void __iomem *)IO_ADDRESS(OMAP243X_SMS_BASE + reg) +#define OMAP343X_SMS_REGADDR(reg) (void __iomem *)IO_ADDRESS(OMAP343X_SMS_BASE + reg) + +/* SMS register offsets - read/write with sms_{read,write}_reg() */ + +#define SMS_SYSCONFIG 0x010 +/* REVISIT: fill in other SMS registers here */ + +#endif diff --git a/include/asm-arm/arch-omap/usb.h b/include/asm-arm/arch-omap/usb.h index 99ae9eabaf71..2147d18aaeae 100644 --- a/include/asm-arm/arch-omap/usb.h +++ b/include/asm-arm/arch-omap/usb.h @@ -132,14 +132,11 @@ # define CONF_USB_PWRDN_DP_R (1 << 1) /* OMAP2 */ -#define CONTROL_DEVCONF_REG __REG32(L4_24XX_BASE + 0x0274) # define USB_UNIDIR 0x0 # define USB_UNIDIR_TLL 0x1 # define USB_BIDIR 0x2 # define USB_BIDIR_TLL 0x3 -# define USBT0WRMODEI(x) ((x) << 22) -# define USBT1WRMODEI(x) ((x) << 20) -# define USBT2WRMODEI(x) ((x) << 18) +# define USBTXWRMODEI(port, x) ((x) << (22 - (port * 2))) # define USBT2TLL5PI (1 << 17) # define USB0PUENACTLOI (1 << 16) # define USBSTANDBYCTRL (1 << 15) |