diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/scsi/Kconfig | 12 | ||||
| -rw-r--r-- | drivers/scsi/Makefile | 1 | ||||
| -rw-r--r-- | drivers/scsi/wd7000.c | 1657 |
3 files changed, 0 insertions, 1670 deletions
diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig index 75de1dc725a1..15c6e9f2162d 100644 --- a/drivers/scsi/Kconfig +++ b/drivers/scsi/Kconfig @@ -396,18 +396,6 @@ config SCSI_3W_SAS Please read the comments at the top of <file:drivers/scsi/3w-sas.c>. -config SCSI_7000FASST - tristate "7000FASST SCSI support" - depends on ISA && SCSI && ISA_DMA_API - select CHECK_SIGNATURE - help - This driver supports the Western Digital 7000 SCSI host adapter - family. Some information is in the source: - <file:drivers/scsi/wd7000.c>. - - To compile this driver as a module, choose M here: the - module will be called wd7000. - config SCSI_ACARD tristate "ACARD SCSI support" depends on PCI && SCSI diff --git a/drivers/scsi/Makefile b/drivers/scsi/Makefile index fc0d9b8f2bdf..d870cc51d0bb 100644 --- a/drivers/scsi/Makefile +++ b/drivers/scsi/Makefile @@ -99,7 +99,6 @@ obj-$(CONFIG_SCSI_DTC3280) += dtc.o obj-$(CONFIG_SCSI_SYM53C8XX_2) += sym53c8xx_2/ obj-$(CONFIG_SCSI_ZALON) += zalon7xx.o obj-$(CONFIG_SCSI_EATA_PIO) += eata_pio.o -obj-$(CONFIG_SCSI_7000FASST) += wd7000.o obj-$(CONFIG_SCSI_EATA) += eata.o obj-$(CONFIG_SCSI_DC395x) += dc395x.o obj-$(CONFIG_SCSI_AM53C974) += esp_scsi.o am53c974.o diff --git a/drivers/scsi/wd7000.c b/drivers/scsi/wd7000.c deleted file mode 100644 index 409f959845c4..000000000000 --- a/drivers/scsi/wd7000.c +++ /dev/null @@ -1,1657 +0,0 @@ -/* $Id: $ - * linux/drivers/scsi/wd7000.c - * - * Copyright (C) 1992 Thomas Wuensche - * closely related to the aha1542 driver from Tommy Thorn - * ( as close as different hardware allows on a lowlevel-driver :-) ) - * - * Revised (and renamed) by John Boyd <boyd@cis.ohio-state.edu> to - * accommodate Eric Youngdale's modifications to scsi.c. Nov 1992. - * - * Additional changes to support scatter/gather. Dec. 1992. tw/jb - * - * No longer tries to reset SCSI bus at boot (it wasn't working anyway). - * Rewritten to support multiple host adapters. - * Miscellaneous cleanup. - * So far, still doesn't do reset or abort correctly, since I have no idea - * how to do them with this board (8^(. Jan 1994 jb - * - * This driver now supports both of the two standard configurations (per - * the 3.36 Owner's Manual, my latest reference) by the same method as - * before; namely, by looking for a BIOS signature. Thus, the location of - * the BIOS signature determines the board configuration. Until I have - * time to do something more flexible, users should stick to one of the - * following: - * - * Standard configuration for single-adapter systems: - * - BIOS at CE00h - * - I/O base address 350h - * - IRQ level 15 - * - DMA channel 6 - * Standard configuration for a second adapter in a system: - * - BIOS at C800h - * - I/O base address 330h - * - IRQ level 11 - * - DMA channel 5 - * - * Anyone who can recompile the kernel is welcome to add others as need - * arises, but unpredictable results may occur if there are conflicts. - * In any event, if there are multiple adapters in a system, they MUST - * use different I/O bases, IRQ levels, and DMA channels, since they will be - * indistinguishable (and in direct conflict) otherwise. - * - * As a point of information, the NO_OP command toggles the CMD_RDY bit - * of the status port, and this fact could be used as a test for the I/O - * base address (or more generally, board detection). There is an interrupt - * status port, so IRQ probing could also be done. I suppose the full - * DMA diagnostic could be used to detect the DMA channel being used. I - * haven't done any of this, though, because I think there's too much of - * a chance that such explorations could be destructive, if some other - * board's resources are used inadvertently. So, call me a wimp, but I - * don't want to try it. The only kind of exploration I trust is memory - * exploration, since it's more certain that reading memory won't be - * destructive. - * - * More to my liking would be a LILO boot command line specification, such - * as is used by the aha152x driver (and possibly others). I'll look into - * it, as I have time... - * - * I get mail occasionally from people who either are using or are - * considering using a WD7000 with Linux. There is a variety of - * nomenclature describing WD7000's. To the best of my knowledge, the - * following is a brief summary (from an old WD doc - I don't work for - * them or anything like that): - * - * WD7000-FASST2: This is a WD7000 board with the real-mode SST ROM BIOS - * installed. Last I heard, the BIOS was actually done by Columbia - * Data Products. The BIOS is only used by this driver (and thus - * by Linux) to identify the board; none of it can be executed under - * Linux. - * - * WD7000-ASC: This is the original adapter board, with or without BIOS. - * The board uses a WD33C93 or WD33C93A SBIC, which in turn is - * controlled by an onboard Z80 processor. The board interface - * visible to the host CPU is defined effectively by the Z80's - * firmware, and it is this firmware's revision level that is - * determined and reported by this driver. (The version of the - * on-board BIOS is of no interest whatsoever.) The host CPU has - * no access to the SBIC; hence the fact that it is a WD33C93 is - * also of no interest to this driver. - * - * WD7000-AX: - * WD7000-MX: - * WD7000-EX: These are newer versions of the WD7000-ASC. The -ASC is - * largely built from discrete components; these boards use more - * integration. The -AX is an ISA bus board (like the -ASC), - * the -MX is an MCA (i.e., PS/2) bus board), and the -EX is an - * EISA bus board. - * - * At the time of my documentation, the -?X boards were "future" products, - * and were not yet available. However, I vaguely recall that Thomas - * Wuensche had an -AX, so I believe at least it is supported by this - * driver. I have no personal knowledge of either -MX or -EX boards. - * - * P.S. Just recently, I've discovered (directly from WD and Future - * Domain) that all but the WD7000-EX have been out of production for - * two years now. FD has production rights to the 7000-EX, and are - * producing it under a new name, and with a new BIOS. If anyone has - * one of the FD boards, it would be nice to come up with a signature - * for it. - * J.B. Jan 1994. - * - * - * Revisions by Miroslav Zagorac <zaga@fly.cc.fer.hr> - * - * 08/24/1996. - * - * Enhancement for wd7000_detect function has been made, so you don't have - * to enter BIOS ROM address in initialisation data (see struct Config). - * We cannot detect IRQ, DMA and I/O base address for now, so we have to - * enter them as arguments while wd_7000 is detected. If someone has IRQ, - * DMA or I/O base address set to some other value, he can enter them in - * configuration without any problem. Also I wrote a function wd7000_setup, - * so now you can enter WD-7000 definition as kernel arguments, - * as in lilo.conf: - * - * append="wd7000=IRQ,DMA,IO" - * - * PS: If card BIOS ROM is disabled, function wd7000_detect now will recognize - * adapter, unlike the old one. Anyway, BIOS ROM from WD7000 adapter is - * useless for Linux. B^) - * - * - * 09/06/1996. - * - * Autodetecting of I/O base address from wd7000_detect function is removed, - * some little bugs removed, etc... - * - * Thanks to Roger Scott for driver debugging. - * - * 06/07/1997 - * - * Added support for /proc file system (/proc/scsi/wd7000/[0...] files). - * Now, driver can handle hard disks with capacity >1GB. - * - * 01/15/1998 - * - * Added support for BUS_ON and BUS_OFF parameters in config line. - * Miscellaneous cleanup. - * - * 03/01/1998 - * - * WD7000 driver now work on kernels >= 2.1.x - * - * - * 12/31/2001 - Arnaldo Carvalho de Melo <acme@conectiva.com.br> - * - * use host->host_lock, not io_request_lock, cleanups - * - * 2002/10/04 - Alan Cox <alan@lxorguk.ukuu.org.uk> - * - * Use dev_id for interrupts, kill __func__ pasting - * Add a lock for the scb pool, clean up all other cli/sti usage stuff - * Use the adapter lock for the other places we had the cli's - * - * 2002/10/06 - Alan Cox <alan@lxorguk.ukuu.org.uk> - * - * Switch to new style error handling - * Clean up delay to udelay, and yielding sleeps - * Make host reset actually reset the card - * Make everything static - * - * 2003/02/12 - Christoph Hellwig <hch@infradead.org> - * - * Cleaned up host template definition - * Removed now obsolete wd7000.h - */ - -#include <linux/delay.h> -#include <linux/module.h> -#include <linux/interrupt.h> -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/string.h> -#include <linux/spinlock.h> -#include <linux/ioport.h> -#include <linux/proc_fs.h> -#include <linux/blkdev.h> -#include <linux/init.h> -#include <linux/stat.h> -#include <linux/io.h> - -#include <asm/dma.h> - -#include <scsi/scsi.h> -#include <scsi/scsi_cmnd.h> -#include <scsi/scsi_device.h> -#include <scsi/scsi_host.h> -#include <scsi/scsicam.h> - - -#undef WD7000_DEBUG /* general debug */ -#ifdef WD7000_DEBUG -#define dprintk printk -#else -#define dprintk no_printk -#endif - -/* - * Mailbox structure sizes. - * I prefer to keep the number of ICMBs much larger than the number of - * OGMBs. OGMBs are used very quickly by the driver to start one or - * more commands, while ICMBs are used by the host adapter per command. - */ -#define OGMB_CNT 16 -#define ICMB_CNT 32 - -/* - * Scb's are shared by all active adapters. So, if they all become busy, - * callers may be made to wait in alloc_scbs for them to free. That can - * be avoided by setting MAX_SCBS to NUM_CONFIG * WD7000_Q. If you'd - * rather conserve memory, use a smaller number (> 0, of course) - things - * will should still work OK. - */ -#define MAX_SCBS 32 - -/* - * In this version, sg_tablesize now defaults to WD7000_SG, and will - * be set to SG_NONE for older boards. This is the reverse of the - * previous default, and was changed so that the driver-level - * scsi_host_template would reflect the driver's support for scatter/ - * gather. - * - * Also, it has been reported that boards at Revision 6 support scatter/ - * gather, so the new definition of an "older" board has been changed - * accordingly. - */ -#define WD7000_Q 16 -#define WD7000_SG 16 - - -/* - * WD7000-specific mailbox structure - * - */ -typedef volatile struct mailbox { - unchar status; - unchar scbptr[3]; /* SCSI-style - MSB first (big endian) */ -} Mailbox; - -/* - * This structure should contain all per-adapter global data. I.e., any - * new global per-adapter data should put in here. - */ -typedef struct adapter { - struct Scsi_Host *sh; /* Pointer to Scsi_Host structure */ - int iobase; /* This adapter's I/O base address */ - int irq; /* This adapter's IRQ level */ - int dma; /* This adapter's DMA channel */ - int int_counter; /* This adapter's interrupt counter */ - int bus_on; /* This adapter's BUS_ON time */ - int bus_off; /* This adapter's BUS_OFF time */ - struct { /* This adapter's mailboxes */ - Mailbox ogmb[OGMB_CNT]; /* Outgoing mailboxes */ - Mailbox icmb[ICMB_CNT]; /* Incoming mailboxes */ - } mb; - int next_ogmb; /* to reduce contention at mailboxes */ - unchar control; /* shadows CONTROL port value */ - unchar rev1, rev2; /* filled in by wd7000_revision */ -} Adapter; - -/* - * (linear) base address for ROM BIOS - */ -static const long wd7000_biosaddr[] = { - 0xc0000, 0xc2000, 0xc4000, 0xc6000, 0xc8000, 0xca000, 0xcc000, 0xce000, - 0xd0000, 0xd2000, 0xd4000, 0xd6000, 0xd8000, 0xda000, 0xdc000, 0xde000 -}; -#define NUM_ADDRS ARRAY_SIZE(wd7000_biosaddr) - -static const unsigned short wd7000_iobase[] = { - 0x0300, 0x0308, 0x0310, 0x0318, 0x0320, 0x0328, 0x0330, 0x0338, - 0x0340, 0x0348, 0x0350, 0x0358, 0x0360, 0x0368, 0x0370, 0x0378, - 0x0380, 0x0388, 0x0390, 0x0398, 0x03a0, 0x03a8, 0x03b0, 0x03b8, - 0x03c0, 0x03c8, 0x03d0, 0x03d8, 0x03e0, 0x03e8, 0x03f0, 0x03f8 -}; -#define NUM_IOPORTS ARRAY_SIZE(wd7000_iobase) - -static const short wd7000_irq[] = { 3, 4, 5, 7, 9, 10, 11, 12, 14, 15 }; -#define NUM_IRQS ARRAY_SIZE(wd7000_irq) - -static const short wd7000_dma[] = { 5, 6, 7 }; -#define NUM_DMAS ARRAY_SIZE(wd7000_dma) - -/* - * The following is set up by wd7000_detect, and used thereafter for - * proc and other global ookups - */ - -#define UNITS 8 -static struct Scsi_Host *wd7000_host[UNITS]; - -#define BUS_ON 64 /* x 125ns = 8000ns (BIOS default) */ -#define BUS_OFF 15 /* x 125ns = 1875ns (BIOS default) */ - -/* - * Standard Adapter Configurations - used by wd7000_detect - */ -typedef struct { - short irq; /* IRQ level */ - short dma; /* DMA channel */ - unsigned iobase; /* I/O base address */ - short bus_on; /* Time that WD7000 spends on the AT-bus when */ - /* transferring data. BIOS default is 8000ns. */ - short bus_off; /* Time that WD7000 spends OFF THE BUS after */ - /* while it is transferring data. */ - /* BIOS default is 1875ns */ -} Config; - -/* - * Add here your configuration... - */ -static Config configs[] = { - {15, 6, 0x350, BUS_ON, BUS_OFF}, /* defaults for single adapter */ - {11, 5, 0x320, BUS_ON, BUS_OFF}, /* defaults for second adapter */ - {7, 6, 0x350, BUS_ON, BUS_OFF}, /* My configuration (Zaga) */ - {-1, -1, 0x0, BUS_ON, BUS_OFF} /* Empty slot */ -}; -#define NUM_CONFIGS ARRAY_SIZE(configs) - -/* - * The following list defines strings to look for in the BIOS that identify - * it as the WD7000-FASST2 SST BIOS. I suspect that something should be - * added for the Future Domain version. - */ -typedef struct signature { - const char *sig; /* String to look for */ - unsigned long ofs; /* offset from BIOS base address */ - unsigned len; /* length of string */ -} Signature; - -static const Signature signatures[] = { - {"SSTBIOS", 0x0000d, 7} /* "SSTBIOS" @ offset 0x0000d */ -}; -#define NUM_SIGNATURES ARRAY_SIZE(signatures) - - -/* - * I/O Port Offsets and Bit Definitions - * 4 addresses are used. Those not defined here are reserved. - */ -#define ASC_STAT 0 /* Status, Read */ -#define ASC_COMMAND 0 /* Command, Write */ -#define ASC_INTR_STAT 1 /* Interrupt Status, Read */ -#define ASC_INTR_ACK 1 /* Acknowledge, Write */ -#define ASC_CONTROL 2 /* Control, Write */ - -/* - * ASC Status Port - */ -#define INT_IM 0x80 /* Interrupt Image Flag */ -#define CMD_RDY 0x40 /* Command Port Ready */ -#define CMD_REJ 0x20 /* Command Port Byte Rejected */ -#define ASC_INIT 0x10 /* ASC Initialized Flag */ -#define ASC_STATMASK 0xf0 /* The lower 4 Bytes are reserved */ - -/* - * COMMAND opcodes - * - * Unfortunately, I have no idea how to properly use some of these commands, - * as the OEM manual does not make it clear. I have not been able to use - * enable/disable unsolicited interrupts or the reset commands with any - * discernible effect whatsoever. I think they may be related to certain - * ICB commands, but again, the OEM manual doesn't make that clear. - */ -#define NO_OP 0 /* NO-OP toggles CMD_RDY bit in ASC_STAT */ -#define INITIALIZATION 1 /* initialization (10 bytes) */ -#define DISABLE_UNS_INTR 2 /* disable unsolicited interrupts */ -#define ENABLE_UNS_INTR 3 /* enable unsolicited interrupts */ -#define INTR_ON_FREE_OGMB 4 /* interrupt on free OGMB */ -#define SOFT_RESET 5 /* SCSI bus soft reset */ -#define HARD_RESET_ACK 6 /* SCSI bus hard reset acknowledge */ -#define START_OGMB 0x80 /* start command in OGMB (n) */ -#define SCAN_OGMBS 0xc0 /* start multiple commands, signature (n) */ - /* where (n) = lower 6 bits */ -/* - * For INITIALIZATION: - */ -typedef struct initCmd { - unchar op; /* command opcode (= 1) */ - unchar ID; /* Adapter's SCSI ID */ - unchar bus_on; /* Bus on time, x 125ns (see below) */ - unchar bus_off; /* Bus off time, "" "" */ - unchar rsvd; /* Reserved */ - unchar mailboxes[3]; /* Address of Mailboxes, MSB first */ - unchar ogmbs; /* Number of outgoing MBs, max 64, 0,1 = 1 */ - unchar icmbs; /* Number of incoming MBs, "" "" */ -} InitCmd; - -/* - * Interrupt Status Port - also returns diagnostic codes at ASC reset - * - * if msb is zero, the lower bits are diagnostic status - * Diagnostics: - * 01 No diagnostic error occurred - * 02 RAM failure - * 03 FIFO R/W failed - * 04 SBIC register read/write failed - * 05 Initialization D-FF failed - * 06 Host IRQ D-FF failed - * 07 ROM checksum error - * Interrupt status (bitwise): - * 10NNNNNN outgoing mailbox NNNNNN is free - * 11NNNNNN incoming mailbox NNNNNN needs service - */ -#define MB_INTR 0xC0 /* Mailbox Service possible/required */ -#define IMB_INTR 0x40 /* 1 Incoming / 0 Outgoing */ -#define MB_MASK 0x3f /* mask for mailbox number */ - -/* - * CONTROL port bits - */ -#define INT_EN 0x08 /* Interrupt Enable */ -#define DMA_EN 0x04 /* DMA Enable */ -#define SCSI_RES 0x02 /* SCSI Reset */ -#define ASC_RES 0x01 /* ASC Reset */ - -/* - * Driver data structures: - * - mb and scbs are required for interfacing with the host adapter. - * An SCB has extra fields not visible to the adapter; mb's - * _cannot_ do this, since the adapter assumes they are contiguous in - * memory, 4 bytes each, with ICMBs following OGMBs, and uses this fact - * to access them. - * - An icb is for host-only (non-SCSI) commands. ICBs are 16 bytes each; - * the additional bytes are used only by the driver. - * - For now, a pool of SCBs are kept in global storage by this driver, - * and are allocated and freed as needed. - * - * The 7000-FASST2 marks OGMBs empty as soon as it has _started_ a command, - * not when it has finished. Since the SCB must be around for completion, - * problems arise when SCBs correspond to OGMBs, which may be reallocated - * earlier (or delayed unnecessarily until a command completes). - * Mailboxes are used as transient data structures, simply for - * carrying SCB addresses to/from the 7000-FASST2. - * - * Note also since SCBs are not "permanently" associated with mailboxes, - * there is no need to keep a global list of scsi_cmnd pointers indexed - * by OGMB. Again, SCBs reference their scsi_cmnds directly, so mailbox - * indices need not be involved. - */ - -/* - * WD7000-specific scatter/gather element structure - */ -typedef struct sgb { - unchar len[3]; - unchar ptr[3]; /* Also SCSI-style - MSB first */ -} Sgb; - -typedef struct scb { /* Command Control Block 5.4.1 */ - unchar op; /* Command Control Block Operation Code */ - unchar idlun; /* op=0,2:Target Id, op=1:Initiator Id */ - /* Outbound data transfer, length is checked */ - /* Inbound data transfer, length is checked */ - /* Logical Unit Number */ - unchar cdb[12]; /* SCSI Command Block */ - volatile unchar status; /* SCSI Return Status */ - volatile unchar vue; /* Vendor Unique Error Code */ - unchar maxlen[3]; /* Maximum Data Transfer Length */ - unchar dataptr[3]; /* SCSI Data Block Pointer */ - unchar linkptr[3]; /* Next Command Link Pointer */ - unchar direc; /* Transfer Direction */ - unchar reserved2[6]; /* SCSI Command Descriptor Block */ - /* end of hardware SCB */ - struct scsi_cmnd *SCpnt;/* scsi_cmnd using this SCB */ - Sgb sgb[WD7000_SG]; /* Scatter/gather list for this SCB */ - Adapter *host; /* host adapter */ - struct scb *next; /* for lists of scbs */ -} Scb; - -/* - * This driver is written to allow host-only commands to be executed. - * These use a 16-byte block called an ICB. The format is extended by the - * driver to 18 bytes, to support the status returned in the ICMB and - * an execution phase code. - * - * There are other formats besides these; these are the ones I've tried - * to use. Formats for some of the defined ICB opcodes are not defined - * (notably, get/set unsolicited interrupt status) in my copy of the OEM - * manual, and others are ambiguous/hard to follow. - */ -#define ICB_OP_MASK 0x80 /* distinguishes scbs from icbs */ -#define ICB_OP_OPEN_RBUF 0x80 /* open receive buffer */ -#define ICB_OP_RECV_CMD 0x81 /* receive command from initiator */ -#define ICB_OP_RECV_DATA 0x82 /* receive data from initiator */ -#define ICB_OP_RECV_SDATA 0x83 /* receive data with status from init. */ -#define ICB_OP_SEND_DATA 0x84 /* send data with status to initiator */ -#define ICB_OP_SEND_STAT 0x86 /* send command status to initiator */ - /* 0x87 is reserved */ -#define ICB_OP_READ_INIT 0x88 /* read initialization bytes */ -#define ICB_OP_READ_ID 0x89 /* read adapter's SCSI ID */ -#define ICB_OP_SET_UMASK 0x8A /* set unsolicited interrupt mask */ -#define ICB_OP_GET_UMASK 0x8B /* read unsolicited interrupt mask */ -#define ICB_OP_GET_REVISION 0x8C /* read firmware revision level */ -#define ICB_OP_DIAGNOSTICS 0x8D /* execute diagnostics */ -#define ICB_OP_SET_EPARMS 0x8E /* set execution parameters */ -#define ICB_OP_GET_EPARMS 0x8F /* read execution parameters */ - -typedef struct icbRecvCmd { - unchar op; - unchar IDlun; /* Initiator SCSI ID/lun */ - unchar len[3]; /* command buffer length */ - unchar ptr[3]; /* command buffer address */ - unchar rsvd[7]; /* reserved */ - volatile unchar vue; /* vendor-unique error code */ - volatile unchar status; /* returned (icmb) status */ - volatile unchar phase; /* used by interrupt handler */ -} IcbRecvCmd; - -typedef struct icbSendStat { - unchar op; - unchar IDlun; /* Target SCSI ID/lun */ - unchar stat; /* (outgoing) completion status byte 1 */ - unchar rsvd[12]; /* reserved */ - volatile unchar vue; /* vendor-unique error code */ - volatile unchar status; /* returned (icmb) status */ - volatile unchar phase; /* used by interrupt handler */ -} IcbSendStat; - -typedef struct icbRevLvl { - unchar op; - volatile unchar primary; /* primary revision level (returned) */ - volatile unchar secondary; /* secondary revision level (returned) */ - unchar rsvd[12]; /* reserved */ - volatile unchar vue; /* vendor-unique error code */ - volatile unchar status; /* returned (icmb) status */ - volatile unchar phase; /* used by interrupt handler */ -} IcbRevLvl; - -typedef struct icbUnsMask { /* I'm totally guessing here */ - unchar op; - volatile unchar mask[14]; /* mask bits */ -#if 0 - unchar rsvd[12]; /* reserved */ -#endif - volatile unchar vue; /* vendor-unique error code */ - volatile unchar status; /* returned (icmb) status */ - volatile unchar phase; /* used by interrupt handler */ -} IcbUnsMask; - -typedef struct icbDiag { - unchar op; - unchar type; /* diagnostics type code (0-3) */ - unchar len[3]; /* buffer length */ - unchar ptr[3]; /* buffer address */ - unchar rsvd[7]; /* reserved */ - volatile unchar vue; /* vendor-unique error code */ - volatile unchar status; /* returned (icmb) status */ - volatile unchar phase; /* used by interrupt handler */ -} IcbDiag; - -#define ICB_DIAG_POWERUP 0 /* Power-up diags only */ -#define ICB_DIAG_WALKING 1 /* walking 1's pattern */ -#define ICB_DIAG_DMA 2 /* DMA - system memory diags */ -#define ICB_DIAG_FULL 3 /* do both 1 & 2 */ - -typedef struct icbParms { - unchar op; - unchar rsvd1; /* reserved */ - unchar len[3]; /* parms buffer length */ - unchar ptr[3]; /* parms buffer address */ - unchar idx[2]; /* index (MSB-LSB) */ - unchar rsvd2[5]; /* reserved */ - volatile unchar vue; /* vendor-unique error code */ - volatile unchar status; /* returned (icmb) status */ - volatile unchar phase; /* used by interrupt handler */ -} IcbParms; - -typedef struct icbAny { - unchar op; - unchar data[14]; /* format-specific data */ - volatile unchar vue; /* vendor-unique error code */ - volatile unchar status; /* returned (icmb) status */ - volatile unchar phase; /* used by interrupt handler */ -} IcbAny; - -typedef union icb { - unchar op; /* ICB opcode */ - IcbRecvCmd recv_cmd; /* format for receive command */ - IcbSendStat send_stat; /* format for send status */ - IcbRevLvl rev_lvl; /* format for get revision level */ - IcbDiag diag; /* format for execute diagnostics */ - IcbParms eparms; /* format for get/set exec parms */ - IcbAny icb; /* generic format */ - unchar data[18]; -} Icb; - -#ifdef MODULE -static char *wd7000; -module_param(wd7000, charp, 0); -#endif - -/* - * Driver SCB structure pool. - * - * The SCBs declared here are shared by all host adapters; hence, this - * structure is not part of the Adapter structure. - */ -static Scb scbs[MAX_SCBS]; -static Scb *scbfree; /* free list */ -static int freescbs = MAX_SCBS; /* free list counter */ -static spinlock_t scbpool_lock; /* guards the scb free list and count */ - -/* - * END of data/declarations - code follows. - */ -static void __init setup_error(char *mesg, int *ints) -{ - if (ints[0] == 3) - printk(KERN_ERR "wd7000_setup: \"wd7000=%d,%d,0x%x\" -> %s\n", ints[1], ints[2], ints[3], mesg); - else if (ints[0] == 4) - printk(KERN_ERR "wd7000_setup: \"wd7000=%d,%d,0x%x,%d\" -> %s\n", ints[1], ints[2], ints[3], ints[4], mesg); - else - printk(KERN_ERR "wd7000_setup: \"wd7000=%d,%d,0x%x,%d,%d\" -> %s\n", ints[1], ints[2], ints[3], ints[4], ints[5], mesg); -} - - -/* - * Note: You can now set these options from the kernel's "command line". - * The syntax is: - * - * wd7000=<IRQ>,<DMA>,<IO>[,<BUS_ON>[,<BUS_OFF>]] - * - * , where BUS_ON and BUS_OFF are in nanoseconds. BIOS default values - * are 8000ns for BUS_ON and 1875ns for BUS_OFF. - * eg: - * wd7000=7,6,0x350 - * - * will configure the driver for a WD-7000 controller - * using IRQ 15 with a DMA channel 6, at IO base address 0x350. - */ -static int __init wd7000_setup(char *str) -{ - static short wd7000_card_num; /* .bss will zero this */ - short i; - int ints[6]; - - (void) get_options(str, ARRAY_SIZE(ints), ints); - - if (wd7000_card_num >= NUM_CONFIGS) { - printk(KERN_ERR "%s: Too many \"wd7000=\" configurations in " "command line!\n", __func__); - return 0; - } - - if ((ints[0] < 3) || (ints[0] > 5)) { - printk(KERN_ERR "%s: Error in command line! " "Usage: wd7000=<IRQ>,<DMA>,IO>[,<BUS_ON>" "[,<BUS_OFF>]]\n", __func__); - } else { - for (i = 0; i < NUM_IRQS; i++) - if (ints[1] == wd7000_irq[i]) - break; - - if (i == NUM_IRQS) { - setup_error("invalid IRQ.", ints); - return 0; - } else - configs[wd7000_card_num].irq = ints[1]; - - for (i = 0; i < NUM_DMAS; i++) - if (ints[2] == wd7000_dma[i]) - break; - - if (i == NUM_DMAS) { - setup_error("invalid DMA channel.", ints); - return 0; - } else - configs[wd7000_card_num].dma = ints[2]; - - for (i = 0; i < NUM_IOPORTS; i++) - if (ints[3] == wd7000_iobase[i]) - break; - - if (i == NUM_IOPORTS) { - setup_error("invalid I/O base address.", ints); - return 0; - } else - configs[wd7000_card_num].iobase = ints[3]; - - if (ints[0] > 3) { - if ((ints[4] < 500) || (ints[4] > 31875)) { - setup_error("BUS_ON value is out of range (500" " to 31875 nanoseconds)!", ints); - configs[wd7000_card_num].bus_on = BUS_ON; - } else - configs[wd7000_card_num].bus_on = ints[4] / 125; - } else - configs[wd7000_card_num].bus_on = BUS_ON; - - if (ints[0] > 4) { - if ((ints[5] < 500) || (ints[5] > 31875)) { - setup_error("BUS_OFF value is out of range (500" " to 31875 nanoseconds)!", ints); - configs[wd7000_card_num].bus_off = BUS_OFF; - } else - configs[wd7000_card_num].bus_off = ints[5] / 125; - } else - configs[wd7000_card_num].bus_off = BUS_OFF; - - if (wd7000_card_num) { - for (i = 0; i < (wd7000_card_num - 1); i++) { - int j = i + 1; - - for (; j < wd7000_card_num; j++) - if (configs[i].irq == configs[j].irq) { - setup_error("duplicated IRQ!", ints); - return 0; - } - if (configs[i].dma == configs[j].dma) { - setup_error("duplicated DMA " "channel!", ints); - return 0; - } - if (configs[i].iobase == configs[j].iobase) { - setup_error("duplicated I/O " "base address!", ints); - return 0; - } - } - } - - dprintk(KERN_DEBUG "wd7000_setup: IRQ=%d, DMA=%d, I/O=0x%x, " - "BUS_ON=%dns, BUS_OFF=%dns\n", configs[wd7000_card_num].irq, configs[wd7000_card_num].dma, configs[wd7000_card_num].iobase, configs[wd7000_card_num].bus_on * 125, configs[wd7000_card_num].bus_off * 125); - - wd7000_card_num++; - } - return 1; -} - -__setup("wd7000=", wd7000_setup); - -static inline void any2scsi(unchar * scsi, int any) -{ - *scsi++ = (unsigned)any >> 16; - *scsi++ = (unsigned)any >> 8; - *scsi++ = any; -} - -static inline int scsi2int(unchar * scsi) -{ - return (scsi[0] << 16) | (scsi[1] << 8) | scsi[2]; -} - -static inline void wd7000_enable_intr(Adapter * host) -{ - host->control |= INT_EN; - outb(host->control, host->iobase + ASC_CONTROL); -} - - -static inline void wd7000_enable_dma(Adapter * host) -{ - unsigned long flags; - host->control |= DMA_EN; - outb(host->control, host->iobase + ASC_CONTROL); - - flags = claim_dma_lock(); - set_dma_mode(host->dma, DMA_MODE_CASCADE); - enable_dma(host->dma); - release_dma_lock(flags); - -} - - -#define WAITnexttimeout 200 /* 2 seconds */ - -static inline short WAIT(unsigned port, unsigned mask, unsigned allof, unsigned noneof) -{ - unsigned WAITbits; - unsigned long WAITtimeout = jiffies + WAITnexttimeout; - - while (time_before_eq(jiffies, WAITtimeout)) { - WAITbits = inb(port) & mask; - - if (((WAITbits & allof) == allof) && ((WAITbits & noneof) == 0)) - return (0); - } - - return (1); -} - - -static inline int command_out(Adapter * host, unchar * cmd, int len) -{ - if (!WAIT(host->iobase + ASC_STAT, ASC_STATMASK, CMD_RDY, 0)) { - while (len--) { - do { - outb(*cmd, host->iobase + ASC_COMMAND); - WAIT(host->iobase + ASC_STAT, ASC_STATMASK, CMD_RDY, 0); - } while (inb(host->iobase + ASC_STAT) & CMD_REJ); - - cmd++; - } - - return (1); - } - - printk(KERN_WARNING "wd7000 command_out: WAIT failed(%d)\n", len + 1); - - return (0); -} - - -/* - * This version of alloc_scbs is in preparation for supporting multiple - * commands per lun and command chaining, by queueing pending commands. - * We will need to allocate Scbs in blocks since they will wait to be - * executed so there is the possibility of deadlock otherwise. - * Also, to keep larger requests from being starved by smaller requests, - * we limit access to this routine with an internal busy flag, so that - * the satisfiability of a request is not dependent on the size of the - * request. - */ -static inline Scb *alloc_scbs(struct Scsi_Host *host, int needed) -{ - Scb *scb, *p = NULL; - unsigned long flags; - unsigned long timeout = jiffies + WAITnexttimeout; - unsigned long now; - int i; - - if (needed <= 0) - return (NULL); /* sanity check */ - - spin_unlock_irq(host->host_lock); - - retry: - while (freescbs < needed) { - timeout = jiffies + WAITnexttimeout; - do { - /* FIXME: can we actually just yield here ?? */ - for (now = jiffies; now == jiffies;) - cpu_relax(); /* wait a jiffy */ - } while (freescbs < needed && time_before_eq(jiffies, timeout)); - /* - * If we get here with enough free Scbs, we can take them. - * Otherwise, we timed out and didn't get enough. - */ - if (freescbs < needed) { - printk(KERN_ERR "wd7000: can't get enough free SCBs.\n"); - return (NULL); - } - } - - /* Take the lock, then check we didn't get beaten, if so try again */ - spin_lock_irqsave(&scbpool_lock, flags); - if (freescbs < needed) { - spin_unlock_irqrestore(&scbpool_lock, flags); - goto retry; - } - - scb = scbfree; - freescbs -= needed; - for (i = 0; i < needed; i++) { - p = scbfree; - scbfree = p->next; - } - p->next = NULL; - - spin_unlock_irqrestore(&scbpool_lock, flags); - - spin_lock_irq(host->host_lock); - return (scb); -} - - -static inline void free_scb(Scb * scb) -{ - unsigned long flags; - - spin_lock_irqsave(&scbpool_lock, flags); - - memset(scb, 0, sizeof(Scb)); - scb->next = scbfree; - scbfree = scb; - freescbs++; - - spin_unlock_irqrestore(&scbpool_lock, flags); -} - - -static inline void init_scbs(void) -{ - int i; - - spin_lock_init(&scbpool_lock); - - /* This is only ever called before the SCB pool is active */ - - scbfree = &(scbs[0]); - memset(scbs, 0, sizeof(scbs)); - for (i = 0; i < MAX_SCBS - 1; i++) { - scbs[i].next = &(scbs[i + 1]); - scbs[i].SCpnt = NULL; - } - scbs[MAX_SCBS - 1].next = NULL; - scbs[MAX_SCBS - 1].SCpnt = NULL; -} - - -static int mail_out(Adapter * host, Scb * scbptr) -/* - * Note: this can also be used for ICBs; just cast to the parm type. - */ -{ - int i, ogmb; - unsigned long flags; - unchar start_ogmb; - Mailbox *ogmbs = host->mb.ogmb; - int *next_ogmb = &(host->next_ogmb); - - dprintk("wd7000_mail_out: 0x%06lx", (long) scbptr); - - /* We first look for a free outgoing mailbox */ - spin_lock_irqsave(host->sh->host_lock, flags); - ogmb = *next_ogmb; - for (i = 0; i < OGMB_CNT; i++) { - if (ogmbs[ogmb].status == 0) { - dprintk(" using OGMB 0x%x", ogmb); - ogmbs[ogmb].status = 1; - any2scsi((unchar *) ogmbs[ogmb].scbptr, (int) scbptr); - - *next_ogmb = (ogmb + 1) % OGMB_CNT; - break; - } else - ogmb = (ogmb + 1) % OGMB_CNT; - } - spin_unlock_irqrestore(host->sh->host_lock, flags); - - dprintk(", scb is 0x%06lx", (long) scbptr); - - if (i >= OGMB_CNT) { - /* - * Alternatively, we might issue the "interrupt on free OGMB", - * and sleep, but it must be ensured that it isn't the init - * task running. Instead, this version assumes that the caller - * will be persistent, and try again. Since it's the adapter - * that marks OGMB's free, waiting even with interrupts off - * should work, since they are freed very quickly in most cases. - */ - dprintk(", no free OGMBs.\n"); - return (0); - } - - wd7000_enable_intr(host); - - start_ogmb = START_OGMB | ogmb; - command_out(host, &start_ogmb, 1); - - dprintk(", awaiting interrupt.\n"); - - return (1); -} - - -static int make_code(unsigned hosterr, unsigned scsierr) -{ -#ifdef WD7000_DEBUG - int in_error = hosterr; -#endif - - switch ((hosterr >> 8) & 0xff) { - case 0: /* Reserved */ - hosterr = DID_ERROR; - break; - case 1: /* Command Complete, no errors */ - hosterr = DID_OK; - break; - case 2: /* Command complete, error logged in scb status (scsierr) */ - hosterr = DID_OK; - break; - case 4: /* Command failed to complete - timeout */ - hosterr = DID_TIME_OUT; - break; - case 5: /* Command terminated; Bus reset by external device */ - hosterr = DID_RESET; - break; - case 6: /* Unexpected Command Received w/ host as target */ - hosterr = DID_BAD_TARGET; - break; - case 80: /* Unexpected Reselection */ - case 81: /* Unexpected Selection */ - hosterr = DID_BAD_INTR; - break; - case 82: /* Abort Command Message */ - hosterr = DID_ABORT; - break; - case 83: /* SCSI Bus Software Reset */ - case 84: /* SCSI Bus Hardware Reset */ - hosterr = DID_RESET; - break; - default: /* Reserved */ - hosterr = DID_ERROR; - } -#ifdef WD7000_DEBUG - if (scsierr || hosterr) - dprintk("\nSCSI command error: SCSI 0x%02x host 0x%04x return %d\n", scsierr, in_error, hosterr); -#endif - return (scsierr | (hosterr << 16)); -} - -#define wd7000_intr_ack(host) outb (0, host->iobase + ASC_INTR_ACK) - - -static irqreturn_t wd7000_intr(int irq, void *dev_id) -{ - Adapter *host = (Adapter *) dev_id; - int flag, icmb, errstatus, icmb_status; - int host_error, scsi_error; - Scb *scb; /* for SCSI commands */ - IcbAny *icb; /* for host commands */ - struct scsi_cmnd *SCpnt; - Mailbox *icmbs = host->mb.icmb; - unsigned long flags; - - spin_lock_irqsave(host->sh->host_lock, flags); - host->int_counter++; - - dprintk("wd7000_intr: irq = %d, host = 0x%06lx\n", irq, (long) host); - - flag = inb(host->iobase + ASC_INTR_STAT); - - dprintk("wd7000_intr: intr stat = 0x%02x\n", flag); - - if (!(inb(host->iobase + ASC_STAT) & INT_IM)) { - /* NB: these are _very_ possible if IRQ 15 is being used, since - * it's the "garbage collector" on the 2nd 8259 PIC. Specifically, - * any interrupt signal into the 8259 which can't be identified - * comes out as 7 from the 8259, which is 15 to the host. Thus, it - * is a good thing the WD7000 has an interrupt status port, so we - * can sort these out. Otherwise, electrical noise and other such - * problems would be indistinguishable from valid interrupts... - */ - dprintk("wd7000_intr: phantom interrupt...\n"); - goto ack; - } - - if (!(flag & MB_INTR)) - goto ack; - - /* The interrupt is for a mailbox */ - if (!(flag & IMB_INTR)) { - dprintk("wd7000_intr: free outgoing mailbox\n"); - /* - * If sleep_on() and the "interrupt on free OGMB" command are - * used in mail_out(), wake_up() should correspondingly be called - * here. For now, we don't need to do anything special. - */ - goto ack; - } - - /* The interrupt is for an incoming mailbox */ - icmb = flag & MB_MASK; - icmb_status = icmbs[icmb].status; - if (icmb_status & 0x80) { /* unsolicited - result in ICMB */ - dprintk("wd7000_intr: unsolicited interrupt 0x%02x\n", icmb_status); - goto ack; - } - - /* Aaaargh! (Zaga) */ - scb = isa_bus_to_virt(scsi2int((unchar *) icmbs[icmb].scbptr)); - icmbs[icmb].status = 0; - if (scb->op & ICB_OP_MASK) { /* an SCB is done */ - icb = (IcbAny *) scb; - icb->status = icmb_status; - icb->phase = 0; - goto ack; - } - - SCpnt = scb->SCpnt; - if (--(SCpnt->SCp.phase) <= 0) { /* all scbs are done */ - host_error = scb->vue | (icmb_status << 8); - scsi_error = scb->status; - errstatus = make_code(host_error, scsi_error); - SCpnt->result = errstatus; - - free_scb(scb); - - SCpnt->scsi_done(SCpnt); - } - - ack: - dprintk("wd7000_intr: return from interrupt handler\n"); - wd7000_intr_ack(host); - - spin_unlock_irqrestore(host->sh->host_lock, flags); - return IRQ_HANDLED; -} - -static int wd7000_queuecommand_lck(struct scsi_cmnd *SCpnt, - void (*done)(struct scsi_cmnd *)) -{ - Scb *scb; - Sgb *sgb; - unchar *cdb = (unchar *) SCpnt->cmnd; - unchar idlun; - short cdblen; - int nseg; - Adapter *host = (Adapter *) SCpnt->device->host->hostdata; - - cdblen = SCpnt->cmd_len; - idlun = ((SCpnt->device->id << 5) & 0xe0) | (SCpnt->device->lun & 7); - SCpnt->scsi_done = done; - SCpnt->SCp.phase = 1; - scb = alloc_scbs(SCpnt->device->host, 1); - scb->idlun = idlun; - memcpy(scb->cdb, cdb, cdblen); - scb->direc = 0x40; /* Disable direction check */ - - scb->SCpnt = SCpnt; /* so we can find stuff later */ - SCpnt->host_scribble = (unchar *) scb; - scb->host = host; - - nseg = scsi_sg_count(SCpnt); - if (nseg > 1) { - struct scatterlist *sg; - unsigned i; - - dprintk("Using scatter/gather with %d elements.\n", nseg); - - sgb = scb->sgb; - scb->op = 1; - any2scsi(scb->dataptr, (int) sgb); - any2scsi(scb->maxlen, nseg * sizeof(Sgb)); - - scsi_for_each_sg(SCpnt, sg, nseg, i) { - any2scsi(sgb[i].ptr, isa_page_to_bus(sg_page(sg)) + sg->offset); - any2scsi(sgb[i].len, sg->length); - } - } else { - scb->op = 0; - if (nseg) { - struct scatterlist *sg = scsi_sglist(SCpnt); - any2scsi(scb->dataptr, isa_page_to_bus(sg_page(sg)) + sg->offset); - } - any2scsi(scb->maxlen, scsi_bufflen(SCpnt)); - } - - /* FIXME: drop lock and yield here ? */ - - while (!mail_out(host, scb)) - cpu_relax(); /* keep trying */ - - return 0; -} - -static DEF_SCSI_QCMD(wd7000_queuecommand) - -static int wd7000_diagnostics(Adapter * host, int code) -{ - static IcbDiag icb = { ICB_OP_DIAGNOSTICS }; - static unchar buf[256]; - unsigned long timeout; - - icb.type = code; - any2scsi(icb.len, sizeof(buf)); - any2scsi(icb.ptr, (int) &buf); - icb.phase = 1; - /* - * This routine is only called at init, so there should be OGMBs - * available. I'm assuming so here. If this is going to - * fail, I can just let the timeout catch the failure. - */ - mail_out(host, (struct scb *) &icb); - timeout = jiffies + WAITnexttimeout; /* wait up to 2 seconds */ - while (icb.phase && time_before(jiffies, timeout)) { - cpu_relax(); /* wait for completion */ - barrier(); - } - - if (icb.phase) { - printk("wd7000_diagnostics: timed out.\n"); - return (0); - } - if (make_code(icb.vue | (icb.status << 8), 0)) { - printk("wd7000_diagnostics: failed (0x%02x,0x%02x)\n", icb.vue, icb.status); - return (0); - } - - return (1); -} - - -static int wd7000_adapter_reset(Adapter * host) -{ - InitCmd init_cmd = { - INITIALIZATION, - 7, - host->bus_on, - host->bus_off, - 0, - {0, 0, 0}, - OGMB_CNT, - ICMB_CNT - }; - int diag; - /* - * Reset the adapter - only. The SCSI bus was initialized at power-up, - * and we need to do this just so we control the mailboxes, etc. - */ - outb(ASC_RES, host->iobase + ASC_CONTROL); - udelay(40); /* reset pulse: this is 40us, only need 25us */ - outb(0, host->iobase + ASC_CONTROL); - host->control = 0; /* this must always shadow ASC_CONTROL */ - - if (WAIT(host->iobase + ASC_STAT, ASC_STATMASK, CMD_RDY, 0)) { - printk(KERN_ERR "wd7000_init: WAIT timed out.\n"); - return -1; /* -1 = not ok */ - } - - if ((diag = inb(host->iobase + ASC_INTR_STAT)) != 1) { - printk("wd7000_init: "); - - switch (diag) { - case 2: - printk(KERN_ERR "RAM failure.\n"); - break; - case 3: - printk(KERN_ERR "FIFO R/W failed\n"); - break; - case 4: - printk(KERN_ERR "SBIC register R/W failed\n"); - break; - case 5: - printk(KERN_ERR "Initialization D-FF failed.\n"); - break; - case 6: - printk(KERN_ERR "Host IRQ D-FF failed.\n"); - break; - case 7: - printk(KERN_ERR "ROM checksum error.\n"); - break; - default: - printk(KERN_ERR "diagnostic code 0x%02Xh received.\n", diag); - } - return -1; - } - /* Clear mailboxes */ - memset(&(host->mb), 0, sizeof(host->mb)); - - /* Execute init command */ - any2scsi((unchar *) & (init_cmd.mailboxes), (int) &(host->mb)); - if (!command_out(host, (unchar *) & init_cmd, sizeof(init_cmd))) { - printk(KERN_ERR "wd7000_adapter_reset: adapter initialization failed.\n"); - return -1; - } - - if (WAIT(host->iobase + ASC_STAT, ASC_STATMASK, ASC_INIT, 0)) { - printk("wd7000_adapter_reset: WAIT timed out.\n"); - return -1; - } - return 0; -} - -static int wd7000_init(Adapter * host) -{ - if (wd7000_adapter_reset(host) == -1) - return 0; - - - if (request_irq(host->irq, wd7000_intr, 0, "wd7000", host)) { - printk("wd7000_init: can't get IRQ %d.\n", host->irq); - return (0); - } - if (request_dma(host->dma, "wd7000")) { - printk("wd7000_init: can't get DMA channel %d.\n", host->dma); - free_irq(host->irq, host); - return (0); - } - wd7000_enable_dma(host); - wd7000_enable_intr(host); - - if (!wd7000_diagnostics(host, ICB_DIAG_FULL)) { - free_dma(host->dma); - free_irq(host->irq, NULL); - return (0); - } - - return (1); -} - - -static void wd7000_revision(Adapter * host) -{ - static IcbRevLvl icb = { ICB_OP_GET_REVISION }; - - icb.phase = 1; - /* - * Like diagnostics, this is only done at init time, in fact, from - * wd7000_detect, so there should be OGMBs available. If it fails, - * the only damage will be that the revision will show up as 0.0, - * which in turn means that scatter/gather will be disabled. - */ - mail_out(host, (struct scb *) &icb); - while (icb.phase) { - cpu_relax(); /* wait for completion */ - barrier(); - } - host->rev1 = icb.primary; - host->rev2 = icb.secondary; -} - - -static int wd7000_set_info(struct Scsi_Host *host, char *buffer, int length) -{ - dprintk("Buffer = <%.*s>, length = %d\n", length, buffer, length); - - /* - * Currently this is a no-op - */ - dprintk("Sorry, this function is currently out of order...\n"); - return (length); -} - - -static int wd7000_show_info(struct seq_file *m, struct Scsi_Host *host) -{ - Adapter *adapter = (Adapter *)host->hostdata; - unsigned long flags; -#ifdef WD7000_DEBUG - Mailbox *ogmbs, *icmbs; - short count; -#endif - - spin_lock_irqsave(host->host_lock, flags); - seq_printf(m, "Host scsi%d: Western Digital WD-7000 (rev %d.%d)\n", host->host_no, adapter->rev1, adapter->rev2); - seq_printf(m, " IO base: 0x%x\n", adapter->iobase); - seq_printf(m, " IRQ: %d\n", adapter->irq); - seq_printf(m, " DMA channel: %d\n", adapter->dma); - seq_printf(m, " Interrupts: %d\n", adapter->int_counter); - seq_printf(m, " BUS_ON time: %d nanoseconds\n", adapter->bus_on * 125); - seq_printf(m, " BUS_OFF time: %d nanoseconds\n", adapter->bus_off * 125); - -#ifdef WD7000_DEBUG - ogmbs = adapter->mb.ogmb; - icmbs = adapter->mb.icmb; - - seq_printf(m, "\nControl port value: 0x%x\n", adapter->control); - seq_puts(m, "Incoming mailbox:\n"); - seq_printf(m, " size: %d\n", ICMB_CNT); - seq_puts(m, " queued messages: "); - - for (i = count = 0; i < ICMB_CNT; i++) - if (icmbs[i].status) { - count++; - seq_printf(m, "0x%x ", i); - } - - seq_puts(m, count ? "\n" : "none\n"); - - seq_puts(m, "Outgoing mailbox:\n"); - seq_printf(m, " size: %d\n", OGMB_CNT); - seq_printf(m, " next message: 0x%x\n", adapter->next_ogmb); - seq_puts(m, " queued messages: "); - - for (i = count = 0; i < OGMB_CNT; i++) - if (ogmbs[i].status) { - count++; - seq_printf(m, "0x%x ", i); - } - - seq_puts(m, count ? "\n" : "none\n"); -#endif - - spin_unlock_irqrestore(host->host_lock, flags); - - return 0; -} - - -/* - * Returns the number of adapters this driver is supporting. - * - * The source for hosts.c says to wait to call scsi_register until 100% - * sure about an adapter. We need to do it a little sooner here; we - * need the storage set up by scsi_register before wd7000_init, and - * changing the location of an Adapter structure is more trouble than - * calling scsi_unregister. - * - */ - -static __init int wd7000_detect(struct scsi_host_template *tpnt) -{ - short present = 0, biosaddr_ptr, sig_ptr, i, pass; - short biosptr[NUM_CONFIGS]; - unsigned iobase; - Adapter *host = NULL; - struct Scsi_Host *sh; - int unit = 0; - - dprintk("wd7000_detect: started\n"); - -#ifdef MODULE - if (wd7000) - wd7000_setup(wd7000); -#endif - - for (i = 0; i < UNITS; wd7000_host[i++] = NULL); - for (i = 0; i < NUM_CONFIGS; biosptr[i++] = -1); - - tpnt->proc_name = "wd7000"; - tpnt->show_info = &wd7000_show_info; - tpnt->write_info = wd7000_set_info; - - /* - * Set up SCB free list, which is shared by all adapters - */ - init_scbs(); - - for (pass = 0; pass < NUM_CONFIGS; pass++) { - /* - * First, search for BIOS SIGNATURE... - */ - for (biosaddr_ptr = 0; biosaddr_ptr < NUM_ADDRS; biosaddr_ptr++) - for (sig_ptr = 0; sig_ptr < NUM_SIGNATURES; sig_ptr++) { - for (i = 0; i < pass; i++) - if (biosptr[i] == biosaddr_ptr) - break; - - if (i == pass) { - void __iomem *biosaddr = ioremap(wd7000_biosaddr[biosaddr_ptr] + signatures[sig_ptr].ofs, - signatures[sig_ptr].len); - short bios_match = 1; - - if (biosaddr) - bios_match = check_signature(biosaddr, signatures[sig_ptr].sig, signatures[sig_ptr].len); - - iounmap(biosaddr); - - if (bios_match) - goto bios_matched; - } - } - - bios_matched: - /* - * BIOS SIGNATURE has been found. - */ -#ifdef WD7000_DEBUG - dprintk("wd7000_detect: pass %d\n", pass + 1); - - if (biosaddr_ptr == NUM_ADDRS) - dprintk("WD-7000 SST BIOS not detected...\n"); - else - dprintk("WD-7000 SST BIOS detected at 0x%lx: checking...\n", wd7000_biosaddr[biosaddr_ptr]); -#endif - - if (configs[pass].irq < 0) - continue; - - if (unit == UNITS) - continue; - - iobase = configs[pass].iobase; - - dprintk("wd7000_detect: check IO 0x%x region...\n", iobase); - - if (request_region(iobase, 4, "wd7000")) { - - dprintk("wd7000_detect: ASC reset (IO 0x%x) ...", iobase); - /* - * ASC reset... - */ - outb(ASC_RES, iobase + ASC_CONTROL); - msleep(10); - outb(0, iobase + ASC_CONTROL); - - if (WAIT(iobase + ASC_STAT, ASC_STATMASK, CMD_RDY, 0)) { - dprintk("failed!\n"); - goto err_release; - } else - dprintk("ok!\n"); - - if (inb(iobase + ASC_INTR_STAT) == 1) { - /* - * We register here, to get a pointer to the extra space, - * which we'll use as the Adapter structure (host) for - * this adapter. It is located just after the registered - * Scsi_Host structure (sh), and is located by the empty - * array hostdata. - */ - sh = scsi_register(tpnt, sizeof(Adapter)); - if (sh == NULL) - goto err_release; - - host = (Adapter *) sh->hostdata; - - dprintk("wd7000_detect: adapter allocated at 0x%x\n", (int) host); - memset(host, 0, sizeof(Adapter)); - - host->irq = configs[pass].irq; - host->dma = configs[pass].dma; - host->iobase = iobase; - host->int_counter = 0; - host->bus_on = configs[pass].bus_on; - host->bus_off = configs[pass].bus_off; - host->sh = wd7000_host[unit] = sh; - unit++; - - dprintk("wd7000_detect: Trying init WD-7000 card at IO " "0x%x, IRQ %d, DMA %d...\n", host->iobase, host->irq, host->dma); - - if (!wd7000_init(host)) /* Initialization failed */ - goto err_unregister; - - /* - * OK from here - we'll use this adapter/configuration. - */ - wd7000_revision(host); /* important for scatter/gather */ - - /* - * For boards before rev 6.0, scatter/gather isn't supported. - */ - if (host->rev1 < 6) - sh->sg_tablesize = 1; - - present++; /* count it */ - - if (biosaddr_ptr != NUM_ADDRS) - biosptr[pass] = biosaddr_ptr; - - printk(KERN_INFO "Western Digital WD-7000 (rev %d.%d) ", host->rev1, host->rev2); - printk("using IO 0x%x, IRQ %d, DMA %d.\n", host->iobase, host->irq, host->dma); - printk(" BUS_ON time: %dns, BUS_OFF time: %dns\n", host->bus_on * 125, host->bus_off * 125); - } - } else - dprintk("wd7000_detect: IO 0x%x region already allocated!\n", iobase); - - continue; - - err_unregister: - scsi_unregister(sh); - err_release: - release_region(iobase, 4); - - } - - if (!present) - printk("Failed initialization of WD-7000 SCSI card!\n"); - - return (present); -} - -static int wd7000_release(struct Scsi_Host *shost) -{ - if (shost->irq) - free_irq(shost->irq, NULL); - if (shost->io_port && shost->n_io_port) - release_region(shost->io_port, shost->n_io_port); - scsi_unregister(shost); - return 0; -} - -#if 0 -/* - * I have absolutely NO idea how to do an abort with the WD7000... - */ -static int wd7000_abort(Scsi_Cmnd * SCpnt) -{ - Adapter *host = (Adapter *) SCpnt->device->host->hostdata; - - if (inb(host->iobase + ASC_STAT) & INT_IM) { - printk("wd7000_abort: lost interrupt\n"); - wd7000_intr_handle(host->irq, NULL, NULL); - return FAILED; - } - return FAILED; -} -#endif - -/* - * Last resort. Reinitialize the board. - */ - -static int wd7000_host_reset(struct scsi_cmnd *SCpnt) -{ - Adapter *host = (Adapter *) SCpnt->device->host->hostdata; - - spin_lock_irq(SCpnt->device->host->host_lock); - - if (wd7000_adapter_reset(host) < 0) { - spin_unlock_irq(SCpnt->device->host->host_lock); - return FAILED; - } - - wd7000_enable_intr(host); - - spin_unlock_irq(SCpnt->device->host->host_lock); - return SUCCESS; -} - -/* - * This was borrowed directly from aha1542.c. (Zaga) - */ - -static int wd7000_biosparam(struct scsi_device *sdev, - struct block_device *bdev, sector_t capacity, int *ip) -{ - char b[BDEVNAME_SIZE]; - - dprintk("wd7000_biosparam: dev=%s, size=%llu, ", - bdevname(bdev, b), (u64)capacity); - (void)b; /* unused var warning? */ - - /* - * try default translation - */ - ip[0] = 64; - ip[1] = 32; - ip[2] = capacity >> 11; - - /* - * for disks >1GB do some guessing - */ - if (ip[2] >= 1024) { - int info[3]; - - /* - * try to figure out the geometry from the partition table - */ - if ((scsicam_bios_param(bdev, capacity, info) < 0) || !(((info[0] == 64) && (info[1] == 32)) || ((info[0] == 255) && (info[1] == 63)))) { - printk("wd7000_biosparam: unable to verify geometry for disk with >1GB.\n" " using extended translation.\n"); - - ip[0] = 255; - ip[1] = 63; - ip[2] = (unsigned long) capacity / (255 * 63); - } else { - ip[0] = info[0]; - ip[1] = info[1]; - ip[2] = info[2]; - - if (info[0] == 255) - printk(KERN_INFO "%s: current partition table is " "using extended translation.\n", __func__); - } - } - - dprintk("bios geometry: head=%d, sec=%d, cyl=%d\n", ip[0], ip[1], ip[2]); - dprintk("WARNING: check, if the bios geometry is correct.\n"); - - return (0); -} - -MODULE_AUTHOR("Thomas Wuensche, John Boyd, Miroslav Zagorac"); -MODULE_DESCRIPTION("Driver for the WD7000 series ISA controllers"); -MODULE_LICENSE("GPL"); - -static struct scsi_host_template driver_template = { - .proc_name = "wd7000", - .show_info = wd7000_show_info, - .write_info = wd7000_set_info, - .name = "Western Digital WD-7000", - .detect = wd7000_detect, - .release = wd7000_release, - .queuecommand = wd7000_queuecommand, - .eh_host_reset_handler = wd7000_host_reset, - .bios_param = wd7000_biosparam, - .can_queue = WD7000_Q, - .this_id = 7, - .sg_tablesize = WD7000_SG, - .unchecked_isa_dma = 1, - .use_clustering = ENABLE_CLUSTERING, -}; - -#include "scsi_module.c" |