diff options
Diffstat (limited to 'drivers')
38 files changed, 537 insertions, 416 deletions
diff --git a/drivers/phy/phy-exynos-mipi-video.c b/drivers/phy/phy-exynos-mipi-video.c index cc093ebfda94..8b851f718123 100644 --- a/drivers/phy/phy-exynos-mipi-video.c +++ b/drivers/phy/phy-exynos-mipi-video.c @@ -233,8 +233,12 @@ static inline int __is_running(const struct exynos_mipi_phy_desc *data, struct exynos_mipi_video_phy *state) { u32 val; + int ret; + + ret = regmap_read(state->regmaps[data->resetn_map], data->resetn_reg, &val); + if (ret) + return 0; - regmap_read(state->regmaps[data->resetn_map], data->resetn_reg, &val); return val & data->resetn_val; } diff --git a/drivers/phy/phy-ti-pipe3.c b/drivers/phy/phy-ti-pipe3.c index 0a477d24cf76..bf46844dc387 100644 --- a/drivers/phy/phy-ti-pipe3.c +++ b/drivers/phy/phy-ti-pipe3.c @@ -293,11 +293,18 @@ static int ti_pipe3_init(struct phy *x) ret = ti_pipe3_dpll_wait_lock(phy); } - /* Program the DPLL only if not locked */ + /* SATA has issues if re-programmed when locked */ val = ti_pipe3_readl(phy->pll_ctrl_base, PLL_STATUS); - if (!(val & PLL_LOCK)) - if (ti_pipe3_dpll_program(phy)) - return -EINVAL; + if ((val & PLL_LOCK) && of_device_is_compatible(phy->dev->of_node, + "ti,phy-pipe3-sata")) + return ret; + + /* Program the DPLL */ + ret = ti_pipe3_dpll_program(phy); + if (ret) { + ti_pipe3_disable_clocks(phy); + return -EINVAL; + } return ret; } diff --git a/drivers/phy/phy-twl4030-usb.c b/drivers/phy/phy-twl4030-usb.c index 6b6af6cba454..d9b10a39a2cf 100644 --- a/drivers/phy/phy-twl4030-usb.c +++ b/drivers/phy/phy-twl4030-usb.c @@ -463,7 +463,8 @@ static int twl4030_phy_power_on(struct phy *phy) twl4030_usb_set_mode(twl, twl->usb_mode); if (twl->usb_mode == T2_USB_MODE_ULPI) twl4030_i2c_access(twl, 0); - schedule_delayed_work(&twl->id_workaround_work, 0); + twl->linkstat = MUSB_UNKNOWN; + schedule_delayed_work(&twl->id_workaround_work, HZ); return 0; } @@ -537,6 +538,7 @@ static irqreturn_t twl4030_usb_irq(int irq, void *_twl) struct twl4030_usb *twl = _twl; enum musb_vbus_id_status status; bool status_changed = false; + int err; status = twl4030_usb_linkstat(twl); @@ -567,7 +569,9 @@ static irqreturn_t twl4030_usb_irq(int irq, void *_twl) pm_runtime_mark_last_busy(twl->dev); pm_runtime_put_autosuspend(twl->dev); } - musb_mailbox(status); + err = musb_mailbox(status); + if (err) + twl->linkstat = MUSB_UNKNOWN; } /* don't schedule during sleep - irq works right then */ @@ -595,7 +599,8 @@ static int twl4030_phy_init(struct phy *phy) struct twl4030_usb *twl = phy_get_drvdata(phy); pm_runtime_get_sync(twl->dev); - schedule_delayed_work(&twl->id_workaround_work, 0); + twl->linkstat = MUSB_UNKNOWN; + schedule_delayed_work(&twl->id_workaround_work, HZ); pm_runtime_mark_last_busy(twl->dev); pm_runtime_put_autosuspend(twl->dev); @@ -763,7 +768,8 @@ static int twl4030_usb_remove(struct platform_device *pdev) if (cable_present(twl->linkstat)) pm_runtime_put_noidle(twl->dev); pm_runtime_mark_last_busy(twl->dev); - pm_runtime_put_sync_suspend(twl->dev); + pm_runtime_dont_use_autosuspend(&pdev->dev); + pm_runtime_put_sync(twl->dev); pm_runtime_disable(twl->dev); /* autogate 60MHz ULPI clock, diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c index 6dc810bce295..944a6dca0fcb 100644 --- a/drivers/usb/core/quirks.c +++ b/drivers/usb/core/quirks.c @@ -44,6 +44,9 @@ static const struct usb_device_id usb_quirk_list[] = { /* Creative SB Audigy 2 NX */ { USB_DEVICE(0x041e, 0x3020), .driver_info = USB_QUIRK_RESET_RESUME }, + /* USB3503 */ + { USB_DEVICE(0x0424, 0x3503), .driver_info = USB_QUIRK_RESET_RESUME }, + /* Microsoft Wireless Laser Mouse 6000 Receiver */ { USB_DEVICE(0x045e, 0x00e1), .driver_info = USB_QUIRK_RESET_RESUME }, @@ -173,6 +176,10 @@ static const struct usb_device_id usb_quirk_list[] = { /* MAYA44USB sound device */ { USB_DEVICE(0x0a92, 0x0091), .driver_info = USB_QUIRK_RESET_RESUME }, + /* ASUS Base Station(T100) */ + { USB_DEVICE(0x0b05, 0x17e0), .driver_info = + USB_QUIRK_IGNORE_REMOTE_WAKEUP }, + /* Action Semiconductor flash disk */ { USB_DEVICE(0x10d6, 0x2200), .driver_info = USB_QUIRK_STRING_FETCH_255 }, @@ -188,26 +195,22 @@ static const struct usb_device_id usb_quirk_list[] = { { USB_DEVICE(0x1908, 0x1315), .driver_info = USB_QUIRK_HONOR_BNUMINTERFACES }, - /* INTEL VALUE SSD */ - { USB_DEVICE(0x8086, 0xf1a5), .driver_info = USB_QUIRK_RESET_RESUME }, - - /* USB3503 */ - { USB_DEVICE(0x0424, 0x3503), .driver_info = USB_QUIRK_RESET_RESUME }, - - /* ASUS Base Station(T100) */ - { USB_DEVICE(0x0b05, 0x17e0), .driver_info = - USB_QUIRK_IGNORE_REMOTE_WAKEUP }, - /* Protocol and OTG Electrical Test Device */ { USB_DEVICE(0x1a0a, 0x0200), .driver_info = USB_QUIRK_LINEAR_UFRAME_INTR_BINTERVAL }, + /* Acer C120 LED Projector */ + { USB_DEVICE(0x1de1, 0xc102), .driver_info = USB_QUIRK_NO_LPM }, + /* Blackmagic Design Intensity Shuttle */ { USB_DEVICE(0x1edb, 0xbd3b), .driver_info = USB_QUIRK_NO_LPM }, /* Blackmagic Design UltraStudio SDI */ { USB_DEVICE(0x1edb, 0xbd4f), .driver_info = USB_QUIRK_NO_LPM }, + /* INTEL VALUE SSD */ + { USB_DEVICE(0x8086, 0xf1a5), .driver_info = USB_QUIRK_RESET_RESUME }, + { } /* terminating entry must be last */ }; diff --git a/drivers/usb/dwc2/core.h b/drivers/usb/dwc2/core.h index 3c58d633ce80..dec0b21fc626 100644 --- a/drivers/usb/dwc2/core.h +++ b/drivers/usb/dwc2/core.h @@ -64,6 +64,17 @@ DWC2_TRACE_SCHEDULER_VB(pr_fmt("%s: SCH: " fmt), \ dev_name(hsotg->dev), ##__VA_ARGS__) +#ifdef CONFIG_MIPS +/* + * There are some MIPS machines that can run in either big-endian + * or little-endian mode and that use the dwc2 register without + * a byteswap in both ways. + * Unlike other architectures, MIPS apparently does not require a + * barrier before the __raw_writel() to synchronize with DMA but does + * require the barrier after the __raw_writel() to serialize a set of + * writes. This set of operations was added specifically for MIPS and + * should only be used there. + */ static inline u32 dwc2_readl(const void __iomem *addr) { u32 value = __raw_readl(addr); @@ -90,6 +101,22 @@ static inline void dwc2_writel(u32 value, void __iomem *addr) pr_info("INFO:: wrote %08x to %p\n", value, addr); #endif } +#else +/* Normal architectures just use readl/write */ +static inline u32 dwc2_readl(const void __iomem *addr) +{ + return readl(addr); +} + +static inline void dwc2_writel(u32 value, void __iomem *addr) +{ + writel(value, addr); + +#ifdef DWC2_LOG_WRITES + pr_info("info:: wrote %08x to %p\n", value, addr); +#endif +} +#endif /* Maximum number of Endpoints/HostChannels */ #define MAX_EPS_CHANNELS 16 diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c index 4c5e3005e1dc..26cf09d0fe3c 100644 --- a/drivers/usb/dwc2/gadget.c +++ b/drivers/usb/dwc2/gadget.c @@ -1018,7 +1018,7 @@ static int dwc2_hsotg_process_req_status(struct dwc2_hsotg *hsotg, return 1; } -static int dwc2_hsotg_ep_sethalt(struct usb_ep *ep, int value); +static int dwc2_hsotg_ep_sethalt(struct usb_ep *ep, int value, bool now); /** * get_ep_head - return the first request on the endpoint @@ -1094,7 +1094,7 @@ static int dwc2_hsotg_process_req_feature(struct dwc2_hsotg *hsotg, case USB_ENDPOINT_HALT: halted = ep->halted; - dwc2_hsotg_ep_sethalt(&ep->ep, set); + dwc2_hsotg_ep_sethalt(&ep->ep, set, true); ret = dwc2_hsotg_send_reply(hsotg, ep0, NULL, 0); if (ret) { @@ -2948,8 +2948,13 @@ static int dwc2_hsotg_ep_dequeue(struct usb_ep *ep, struct usb_request *req) * dwc2_hsotg_ep_sethalt - set halt on a given endpoint * @ep: The endpoint to set halt. * @value: Set or unset the halt. + * @now: If true, stall the endpoint now. Otherwise return -EAGAIN if + * the endpoint is busy processing requests. + * + * We need to stall the endpoint immediately if request comes from set_feature + * protocol command handler. */ -static int dwc2_hsotg_ep_sethalt(struct usb_ep *ep, int value) +static int dwc2_hsotg_ep_sethalt(struct usb_ep *ep, int value, bool now) { struct dwc2_hsotg_ep *hs_ep = our_ep(ep); struct dwc2_hsotg *hs = hs_ep->parent; @@ -2969,6 +2974,17 @@ static int dwc2_hsotg_ep_sethalt(struct usb_ep *ep, int value) return 0; } + if (hs_ep->isochronous) { + dev_err(hs->dev, "%s is Isochronous Endpoint\n", ep->name); + return -EINVAL; + } + + if (!now && value && !list_empty(&hs_ep->queue)) { + dev_dbg(hs->dev, "%s request is pending, cannot halt\n", + ep->name); + return -EAGAIN; + } + if (hs_ep->dir_in) { epreg = DIEPCTL(index); epctl = dwc2_readl(hs->regs + epreg); @@ -3020,7 +3036,7 @@ static int dwc2_hsotg_ep_sethalt_lock(struct usb_ep *ep, int value) int ret = 0; spin_lock_irqsave(&hs->lock, flags); - ret = dwc2_hsotg_ep_sethalt(ep, value); + ret = dwc2_hsotg_ep_sethalt(ep, value, false); spin_unlock_irqrestore(&hs->lock, flags); return ret; diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h index 7ddf9449a063..654050684f4f 100644 --- a/drivers/usb/dwc3/core.h +++ b/drivers/usb/dwc3/core.h @@ -402,6 +402,7 @@ #define DWC3_DEPCMD_GET_RSC_IDX(x) (((x) >> DWC3_DEPCMD_PARAM_SHIFT) & 0x7f) #define DWC3_DEPCMD_STATUS(x) (((x) >> 12) & 0x0F) #define DWC3_DEPCMD_HIPRI_FORCERM (1 << 11) +#define DWC3_DEPCMD_CLEARPENDIN (1 << 11) #define DWC3_DEPCMD_CMDACT (1 << 10) #define DWC3_DEPCMD_CMDIOC (1 << 8) diff --git a/drivers/usb/dwc3/dwc3-exynos.c b/drivers/usb/dwc3/dwc3-exynos.c index dd5cb5577dca..2f1fb7e7aa54 100644 --- a/drivers/usb/dwc3/dwc3-exynos.c +++ b/drivers/usb/dwc3/dwc3-exynos.c @@ -128,12 +128,6 @@ static int dwc3_exynos_probe(struct platform_device *pdev) platform_set_drvdata(pdev, exynos); - ret = dwc3_exynos_register_phys(exynos); - if (ret) { - dev_err(dev, "couldn't register PHYs\n"); - return ret; - } - exynos->dev = dev; exynos->clk = devm_clk_get(dev, "usbdrd30"); @@ -183,20 +177,29 @@ static int dwc3_exynos_probe(struct platform_device *pdev) goto err3; } + ret = dwc3_exynos_register_phys(exynos); + if (ret) { + dev_err(dev, "couldn't register PHYs\n"); + goto err4; + } + if (node) { ret = of_platform_populate(node, NULL, NULL, dev); if (ret) { dev_err(dev, "failed to add dwc3 core\n"); - goto err4; + goto err5; } } else { dev_err(dev, "no device node, failed to add dwc3 core\n"); ret = -ENODEV; - goto err4; + goto err5; } return 0; +err5: + platform_device_unregister(exynos->usb2_phy); + platform_device_unregister(exynos->usb3_phy); err4: regulator_disable(exynos->vdd10); err3: diff --git a/drivers/usb/dwc3/dwc3-st.c b/drivers/usb/dwc3/dwc3-st.c index 5c0adb9c6fb2..50d6ae6f88bc 100644 --- a/drivers/usb/dwc3/dwc3-st.c +++ b/drivers/usb/dwc3/dwc3-st.c @@ -129,12 +129,18 @@ static int st_dwc3_drd_init(struct st_dwc3 *dwc3_data) switch (dwc3_data->dr_mode) { case USB_DR_MODE_PERIPHERAL: - val &= ~(USB3_FORCE_VBUSVALID | USB3_DELAY_VBUSVALID + val &= ~(USB3_DELAY_VBUSVALID | USB3_SEL_FORCE_OPMODE | USB3_FORCE_OPMODE(0x3) | USB3_SEL_FORCE_DPPULLDOWN2 | USB3_FORCE_DPPULLDOWN2 | USB3_SEL_FORCE_DMPULLDOWN2 | USB3_FORCE_DMPULLDOWN2); - val |= USB3_DEVICE_NOT_HOST; + /* + * USB3_PORT2_FORCE_VBUSVALID When '1' and when + * USB3_PORT2_DEVICE_NOT_HOST = 1, forces VBUSVLDEXT2 input + * of the pico PHY to 1. + */ + + val |= USB3_DEVICE_NOT_HOST | USB3_FORCE_VBUSVALID; break; case USB_DR_MODE_HOST: diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index 9a7d0bd15dc3..07248ff1be5c 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -347,6 +347,28 @@ int dwc3_send_gadget_ep_cmd(struct dwc3 *dwc, unsigned ep, return ret; } +static int dwc3_send_clear_stall_ep_cmd(struct dwc3_ep *dep) +{ + struct dwc3 *dwc = dep->dwc; + struct dwc3_gadget_ep_cmd_params params; + u32 cmd = DWC3_DEPCMD_CLEARSTALL; + + /* + * As of core revision 2.60a the recommended programming model + * is to set the ClearPendIN bit when issuing a Clear Stall EP + * command for IN endpoints. This is to prevent an issue where + * some (non-compliant) hosts may not send ACK TPs for pending + * IN transfers due to a mishandled error condition. Synopsys + * STAR 9000614252. + */ + if (dep->direction && (dwc->revision >= DWC3_REVISION_260A)) + cmd |= DWC3_DEPCMD_CLEARPENDIN; + + memset(¶ms, 0, sizeof(params)); + + return dwc3_send_gadget_ep_cmd(dwc, dep->number, cmd, ¶ms); +} + static dma_addr_t dwc3_trb_dma_offset(struct dwc3_ep *dep, struct dwc3_trb *trb) { @@ -1314,8 +1336,7 @@ int __dwc3_gadget_ep_set_halt(struct dwc3_ep *dep, int value, int protocol) else dep->flags |= DWC3_EP_STALL; } else { - ret = dwc3_send_gadget_ep_cmd(dwc, dep->number, - DWC3_DEPCMD_CLEARSTALL, ¶ms); + ret = dwc3_send_clear_stall_ep_cmd(dep); if (ret) dev_err(dwc->dev, "failed to clear STALL on %s\n", dep->name); @@ -2247,7 +2268,6 @@ static void dwc3_clear_stall_all_ep(struct dwc3 *dwc) for (epnum = 1; epnum < DWC3_ENDPOINTS_NUM; epnum++) { struct dwc3_ep *dep; - struct dwc3_gadget_ep_cmd_params params; int ret; dep = dwc->eps[epnum]; @@ -2259,9 +2279,7 @@ static void dwc3_clear_stall_all_ep(struct dwc3 *dwc) dep->flags &= ~DWC3_EP_STALL; - memset(¶ms, 0, sizeof(params)); - ret = dwc3_send_gadget_ep_cmd(dwc, dep->number, - DWC3_DEPCMD_CLEARSTALL, ¶ms); + ret = dwc3_send_clear_stall_ep_cmd(dep); WARN_ON_ONCE(ret); } } diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c index d67de0d22a2b..eb648485a58c 100644 --- a/drivers/usb/gadget/composite.c +++ b/drivers/usb/gadget/composite.c @@ -1868,14 +1868,19 @@ unknown: } break; } - req->length = value; - req->context = cdev; - req->zero = value < w_length; - value = composite_ep0_queue(cdev, req, GFP_ATOMIC); - if (value < 0) { - DBG(cdev, "ep_queue --> %d\n", value); - req->status = 0; - composite_setup_complete(gadget->ep0, req); + + if (value >= 0) { + req->length = value; + req->context = cdev; + req->zero = value < w_length; + value = composite_ep0_queue(cdev, req, + GFP_ATOMIC); + if (value < 0) { + DBG(cdev, "ep_queue --> %d\n", value); + req->status = 0; + composite_setup_complete(gadget->ep0, + req); + } } return value; } diff --git a/drivers/usb/gadget/configfs.c b/drivers/usb/gadget/configfs.c index b6f60ca8a035..70cf3477f951 100644 --- a/drivers/usb/gadget/configfs.c +++ b/drivers/usb/gadget/configfs.c @@ -1401,6 +1401,7 @@ static const struct usb_gadget_driver configfs_driver_template = { .owner = THIS_MODULE, .name = "configfs-gadget", }, + .match_existing_only = 1, }; static struct config_group *gadgets_make( diff --git a/drivers/usb/gadget/function/f_fs.c b/drivers/usb/gadget/function/f_fs.c index 73515d54e1cc..cc33d2667408 100644 --- a/drivers/usb/gadget/function/f_fs.c +++ b/drivers/usb/gadget/function/f_fs.c @@ -2051,7 +2051,7 @@ static int __ffs_data_do_os_desc(enum ffs_os_desc_type type, if (len < sizeof(*d) || d->bFirstInterfaceNumber >= ffs->interfaces_count || - d->Reserved1) + !d->Reserved1) return -EINVAL; for (i = 0; i < ARRAY_SIZE(d->Reserved2); ++i) if (d->Reserved2[i]) @@ -2729,6 +2729,7 @@ static int _ffs_func_bind(struct usb_configuration *c, func->ffs->ss_descs_count; int fs_len, hs_len, ss_len, ret, i; + struct ffs_ep *eps_ptr; /* Make it a single chunk, less management later on */ vla_group(d); @@ -2777,12 +2778,9 @@ static int _ffs_func_bind(struct usb_configuration *c, ffs->raw_descs_length); memset(vla_ptr(vlabuf, d, inums), 0xff, d_inums__sz); - for (ret = ffs->eps_count; ret; --ret) { - struct ffs_ep *ptr; - - ptr = vla_ptr(vlabuf, d, eps); - ptr[ret].num = -1; - } + eps_ptr = vla_ptr(vlabuf, d, eps); + for (i = 0; i < ffs->eps_count; i++) + eps_ptr[i].num = -1; /* Save pointers * d_eps == vlabuf, func->eps used to kfree vlabuf later @@ -2851,7 +2849,7 @@ static int _ffs_func_bind(struct usb_configuration *c, goto error; func->function.os_desc_table = vla_ptr(vlabuf, d, os_desc_table); - if (c->cdev->use_os_string) + if (c->cdev->use_os_string) { for (i = 0; i < ffs->interfaces_count; ++i) { struct usb_os_desc *desc; @@ -2862,13 +2860,15 @@ static int _ffs_func_bind(struct usb_configuration *c, vla_ptr(vlabuf, d, ext_compat) + i * 16; INIT_LIST_HEAD(&desc->ext_prop); } - ret = ffs_do_os_descs(ffs->ms_os_descs_count, - vla_ptr(vlabuf, d, raw_descs) + - fs_len + hs_len + ss_len, - d_raw_descs__sz - fs_len - hs_len - ss_len, - __ffs_func_bind_do_os_desc, func); - if (unlikely(ret < 0)) - goto error; + ret = ffs_do_os_descs(ffs->ms_os_descs_count, + vla_ptr(vlabuf, d, raw_descs) + + fs_len + hs_len + ss_len, + d_raw_descs__sz - fs_len - hs_len - + ss_len, + __ffs_func_bind_do_os_desc, func); + if (unlikely(ret < 0)) + goto error; + } func->function.os_desc_n = c->cdev->use_os_string ? ffs->interfaces_count : 0; diff --git a/drivers/usb/gadget/function/f_printer.c b/drivers/usb/gadget/function/f_printer.c index c45104e3a64b..64706a789580 100644 --- a/drivers/usb/gadget/function/f_printer.c +++ b/drivers/usb/gadget/function/f_printer.c @@ -161,14 +161,6 @@ static struct usb_endpoint_descriptor hs_ep_out_desc = { .wMaxPacketSize = cpu_to_le16(512) }; -static struct usb_qualifier_descriptor dev_qualifier = { - .bLength = sizeof(dev_qualifier), - .bDescriptorType = USB_DT_DEVICE_QUALIFIER, - .bcdUSB = cpu_to_le16(0x0200), - .bDeviceClass = USB_CLASS_PRINTER, - .bNumConfigurations = 1 -}; - static struct usb_descriptor_header *hs_printer_function[] = { (struct usb_descriptor_header *) &intf_desc, (struct usb_descriptor_header *) &hs_ep_in_desc, diff --git a/drivers/usb/gadget/function/f_tcm.c b/drivers/usb/gadget/function/f_tcm.c index 35fe3c80cfc0..197f73386fac 100644 --- a/drivers/usb/gadget/function/f_tcm.c +++ b/drivers/usb/gadget/function/f_tcm.c @@ -1445,16 +1445,18 @@ static void usbg_drop_tpg(struct se_portal_group *se_tpg) for (i = 0; i < TPG_INSTANCES; ++i) if (tpg_instances[i].tpg == tpg) break; - if (i < TPG_INSTANCES) + if (i < TPG_INSTANCES) { tpg_instances[i].tpg = NULL; - opts = container_of(tpg_instances[i].func_inst, - struct f_tcm_opts, func_inst); - mutex_lock(&opts->dep_lock); - if (opts->has_dep) - module_put(opts->dependent); - else - configfs_undepend_item_unlocked(&opts->func_inst.group.cg_item); - mutex_unlock(&opts->dep_lock); + opts = container_of(tpg_instances[i].func_inst, + struct f_tcm_opts, func_inst); + mutex_lock(&opts->dep_lock); + if (opts->has_dep) + module_put(opts->dependent); + else + configfs_undepend_item_unlocked( + &opts->func_inst.group.cg_item); + mutex_unlock(&opts->dep_lock); + } mutex_unlock(&tpg_instances_lock); kfree(tpg); diff --git a/drivers/usb/gadget/function/f_uac2.c b/drivers/usb/gadget/function/f_uac2.c index 186d4b162524..cd214ec8a601 100644 --- a/drivers/usb/gadget/function/f_uac2.c +++ b/drivers/usb/gadget/function/f_uac2.c @@ -598,18 +598,6 @@ static struct usb_gadget_strings *fn_strings[] = { NULL, }; -static struct usb_qualifier_descriptor devqual_desc = { - .bLength = sizeof devqual_desc, - .bDescriptorType = USB_DT_DEVICE_QUALIFIER, - - .bcdUSB = cpu_to_le16(0x200), - .bDeviceClass = USB_CLASS_MISC, - .bDeviceSubClass = 0x02, - .bDeviceProtocol = 0x01, - .bNumConfigurations = 1, - .bRESERVED = 0, -}; - static struct usb_interface_assoc_descriptor iad_desc = { .bLength = sizeof iad_desc, .bDescriptorType = USB_DT_INTERFACE_ASSOCIATION, @@ -1292,6 +1280,7 @@ in_rq_cur(struct usb_function *fn, const struct usb_ctrlrequest *cr) if (control_selector == UAC2_CS_CONTROL_SAM_FREQ) { struct cntrl_cur_lay3 c; + memset(&c, 0, sizeof(struct cntrl_cur_lay3)); if (entity_id == USB_IN_CLK_ID) c.dCUR = p_srate; diff --git a/drivers/usb/gadget/function/storage_common.c b/drivers/usb/gadget/function/storage_common.c index d62683017cf3..990df221c629 100644 --- a/drivers/usb/gadget/function/storage_common.c +++ b/drivers/usb/gadget/function/storage_common.c @@ -83,9 +83,7 @@ EXPORT_SYMBOL_GPL(fsg_fs_function); * USB 2.0 devices need to expose both high speed and full speed * descriptors, unless they only run at full speed. * - * That means alternate endpoint descriptors (bigger packets) - * and a "device qualifier" ... plus more construction options - * for the configuration descriptor. + * That means alternate endpoint descriptors (bigger packets). */ struct usb_endpoint_descriptor fsg_hs_bulk_in_desc = { .bLength = USB_DT_ENDPOINT_SIZE, diff --git a/drivers/usb/gadget/legacy/inode.c b/drivers/usb/gadget/legacy/inode.c index e64479f882a5..aa3707bdebb4 100644 --- a/drivers/usb/gadget/legacy/inode.c +++ b/drivers/usb/gadget/legacy/inode.c @@ -938,8 +938,11 @@ ep0_read (struct file *fd, char __user *buf, size_t len, loff_t *ptr) struct usb_ep *ep = dev->gadget->ep0; struct usb_request *req = dev->req; - if ((retval = setup_req (ep, req, 0)) == 0) - retval = usb_ep_queue (ep, req, GFP_ATOMIC); + if ((retval = setup_req (ep, req, 0)) == 0) { + spin_unlock_irq (&dev->lock); + retval = usb_ep_queue (ep, req, GFP_KERNEL); + spin_lock_irq (&dev->lock); + } dev->state = STATE_DEV_CONNECTED; /* assume that was SET_CONFIGURATION */ @@ -1457,8 +1460,11 @@ delegate: w_length); if (value < 0) break; + + spin_unlock (&dev->lock); value = usb_ep_queue (gadget->ep0, dev->req, - GFP_ATOMIC); + GFP_KERNEL); + spin_lock (&dev->lock); if (value < 0) { clean_req (gadget->ep0, dev->req); break; @@ -1481,11 +1487,14 @@ delegate: if (value >= 0 && dev->state != STATE_DEV_SETUP) { req->length = value; req->zero = value < w_length; - value = usb_ep_queue (gadget->ep0, req, GFP_ATOMIC); + + spin_unlock (&dev->lock); + value = usb_ep_queue (gadget->ep0, req, GFP_KERNEL); if (value < 0) { DBG (dev, "ep_queue --> %d\n", value); req->status = 0; } + return value; } /* device stalls when value < 0 */ diff --git a/drivers/usb/gadget/udc/udc-core.c b/drivers/usb/gadget/udc/udc-core.c index 6e8300d6a737..e1b2dcebdc2e 100644 --- a/drivers/usb/gadget/udc/udc-core.c +++ b/drivers/usb/gadget/udc/udc-core.c @@ -603,11 +603,15 @@ int usb_gadget_probe_driver(struct usb_gadget_driver *driver) } } - list_add_tail(&driver->pending, &gadget_driver_pending_list); - pr_info("udc-core: couldn't find an available UDC - added [%s] to list of pending drivers\n", - driver->function); + if (!driver->match_existing_only) { + list_add_tail(&driver->pending, &gadget_driver_pending_list); + pr_info("udc-core: couldn't find an available UDC - added [%s] to list of pending drivers\n", + driver->function); + ret = 0; + } + mutex_unlock(&udc_lock); - return 0; + return ret; found: ret = udc_bind_to_driver(udc, driver); mutex_unlock(&udc_lock); diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index ae1b6e69eb96..a962b89b65a6 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -368,6 +368,15 @@ static void ehci_shutdown(struct usb_hcd *hcd) { struct ehci_hcd *ehci = hcd_to_ehci(hcd); + /** + * Protect the system from crashing at system shutdown in cases where + * usb host is not added yet from OTG controller driver. + * As ehci_setup() not done yet, so stop accessing registers or + * variables initialized in ehci_setup() + */ + if (!ehci->sbrn) + return; + spin_lock_irq(&ehci->lock); ehci->shutdown = true; ehci->rh_state = EHCI_RH_STOPPING; diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c index ffc90295a95f..74f62d68f013 100644 --- a/drivers/usb/host/ehci-hub.c +++ b/drivers/usb/host/ehci-hub.c @@ -872,15 +872,23 @@ int ehci_hub_control( ) { struct ehci_hcd *ehci = hcd_to_ehci (hcd); int ports = HCS_N_PORTS (ehci->hcs_params); - u32 __iomem *status_reg = &ehci->regs->port_status[ - (wIndex & 0xff) - 1]; - u32 __iomem *hostpc_reg = &ehci->regs->hostpc[(wIndex & 0xff) - 1]; + u32 __iomem *status_reg, *hostpc_reg; u32 temp, temp1, status; unsigned long flags; int retval = 0; unsigned selector; /* + * Avoid underflow while calculating (wIndex & 0xff) - 1. + * The compiler might deduce that wIndex can never be 0 and then + * optimize away the tests for !wIndex below. + */ + temp = wIndex & 0xff; + temp -= (temp > 0); + status_reg = &ehci->regs->port_status[temp]; + hostpc_reg = &ehci->regs->hostpc[temp]; + + /* * FIXME: support SetPortFeatures USB_PORT_FEAT_INDICATOR. * HCS_INDICATOR may say we can change LEDs to off/amber/green. * (track current state ourselves) ... blink for diagnostics, diff --git a/drivers/usb/host/ehci-msm.c b/drivers/usb/host/ehci-msm.c index d3afc89d00f5..2f8d3af811ce 100644 --- a/drivers/usb/host/ehci-msm.c +++ b/drivers/usb/host/ehci-msm.c @@ -179,22 +179,32 @@ static int ehci_msm_remove(struct platform_device *pdev) static int ehci_msm_pm_suspend(struct device *dev) { struct usb_hcd *hcd = dev_get_drvdata(dev); + struct ehci_hcd *ehci = hcd_to_ehci(hcd); bool do_wakeup = device_may_wakeup(dev); dev_dbg(dev, "ehci-msm PM suspend\n"); - return ehci_suspend(hcd, do_wakeup); + /* Only call ehci_suspend if ehci_setup has been done */ + if (ehci->sbrn) + return ehci_suspend(hcd, do_wakeup); + + return 0; } static int ehci_msm_pm_resume(struct device *dev) { struct usb_hcd *hcd = dev_get_drvdata(dev); + struct ehci_hcd *ehci = hcd_to_ehci(hcd); dev_dbg(dev, "ehci-msm PM resume\n"); - ehci_resume(hcd, false); + + /* Only call ehci_resume if ehci_setup has been done */ + if (ehci->sbrn) + ehci_resume(hcd, false); return 0; } + #else #define ehci_msm_pm_suspend NULL #define ehci_msm_pm_resume NULL diff --git a/drivers/usb/host/ehci-tegra.c b/drivers/usb/host/ehci-tegra.c index 4031b372008e..9a3d7db5be57 100644 --- a/drivers/usb/host/ehci-tegra.c +++ b/drivers/usb/host/ehci-tegra.c @@ -81,15 +81,23 @@ static int tegra_reset_usb_controller(struct platform_device *pdev) struct usb_hcd *hcd = platform_get_drvdata(pdev); struct tegra_ehci_hcd *tegra = (struct tegra_ehci_hcd *)hcd_to_ehci(hcd)->priv; + bool has_utmi_pad_registers = false; phy_np = of_parse_phandle(pdev->dev.of_node, "nvidia,phy", 0); if (!phy_np) return -ENOENT; + if (of_property_read_bool(phy_np, "nvidia,has-utmi-pad-registers")) + has_utmi_pad_registers = true; + if (!usb1_reset_attempted) { struct reset_control *usb1_reset; - usb1_reset = of_reset_control_get(phy_np, "usb"); + if (!has_utmi_pad_registers) + usb1_reset = of_reset_control_get(phy_np, "utmi-pads"); + else + usb1_reset = tegra->rst; + if (IS_ERR(usb1_reset)) { dev_warn(&pdev->dev, "can't get utmi-pads reset from the PHY\n"); @@ -99,13 +107,15 @@ static int tegra_reset_usb_controller(struct platform_device *pdev) reset_control_assert(usb1_reset); udelay(1); reset_control_deassert(usb1_reset); + + if (!has_utmi_pad_registers) + reset_control_put(usb1_reset); } - reset_control_put(usb1_reset); usb1_reset_attempted = true; } - if (!of_property_read_bool(phy_np, "nvidia,has-utmi-pad-registers")) { + if (!has_utmi_pad_registers) { reset_control_assert(tegra->rst); udelay(1); reset_control_deassert(tegra->rst); diff --git a/drivers/usb/host/ohci-q.c b/drivers/usb/host/ohci-q.c index d029bbe9eb36..641fed609911 100644 --- a/drivers/usb/host/ohci-q.c +++ b/drivers/usb/host/ohci-q.c @@ -183,7 +183,6 @@ static int ed_schedule (struct ohci_hcd *ohci, struct ed *ed) { int branch; - ed->state = ED_OPER; ed->ed_prev = NULL; ed->ed_next = NULL; ed->hwNextED = 0; @@ -259,6 +258,8 @@ static int ed_schedule (struct ohci_hcd *ohci, struct ed *ed) /* the HC may not see the schedule updates yet, but if it does * then they'll be properly ordered. */ + + ed->state = ED_OPER; return 0; } diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index 48672fac7ff3..c10972fcc8e4 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -37,6 +37,7 @@ /* Device for a quirk */ #define PCI_VENDOR_ID_FRESCO_LOGIC 0x1b73 #define PCI_DEVICE_ID_FRESCO_LOGIC_PDK 0x1000 +#define PCI_DEVICE_ID_FRESCO_LOGIC_FL1009 0x1009 #define PCI_DEVICE_ID_FRESCO_LOGIC_FL1400 0x1400 #define PCI_VENDOR_ID_ETRON 0x1b6f @@ -114,6 +115,10 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci) xhci->quirks |= XHCI_TRUST_TX_LENGTH; } + if (pdev->vendor == PCI_VENDOR_ID_FRESCO_LOGIC && + pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_FL1009) + xhci->quirks |= XHCI_BROKEN_STREAMS; + if (pdev->vendor == PCI_VENDOR_ID_NEC) xhci->quirks |= XHCI_NEC_HOST; diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c index 676ea458148b..1f3f981fe7f8 100644 --- a/drivers/usb/host/xhci-plat.c +++ b/drivers/usb/host/xhci-plat.c @@ -196,6 +196,9 @@ static int xhci_plat_probe(struct platform_device *pdev) ret = clk_prepare_enable(clk); if (ret) goto put_hcd; + } else if (PTR_ERR(clk) == -EPROBE_DEFER) { + ret = -EPROBE_DEFER; + goto put_hcd; } xhci = hcd_to_xhci(hcd); diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index 52deae4b7eac..d7d502578d79 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -290,6 +290,14 @@ static int xhci_abort_cmd_ring(struct xhci_hcd *xhci) temp_64 = xhci_read_64(xhci, &xhci->op_regs->cmd_ring); xhci->cmd_ring_state = CMD_RING_STATE_ABORTED; + + /* + * Writing the CMD_RING_ABORT bit should cause a cmd completion event, + * however on some host hw the CMD_RING_RUNNING bit is correctly cleared + * but the completion event in never sent. Use the cmd timeout timer to + * handle those cases. Use twice the time to cover the bit polling retry + */ + mod_timer(&xhci->cmd_timer, jiffies + (2 * XHCI_CMD_DEFAULT_TIMEOUT)); xhci_write_64(xhci, temp_64 | CMD_RING_ABORT, &xhci->op_regs->cmd_ring); @@ -314,6 +322,7 @@ static int xhci_abort_cmd_ring(struct xhci_hcd *xhci) xhci_err(xhci, "Stopped the command ring failed, " "maybe the host is dead\n"); + del_timer(&xhci->cmd_timer); xhci->xhc_state |= XHCI_STATE_DYING; xhci_quiesce(xhci); xhci_halt(xhci); @@ -1246,22 +1255,21 @@ void xhci_handle_command_timeout(unsigned long data) int ret; unsigned long flags; u64 hw_ring_state; - struct xhci_command *cur_cmd = NULL; + bool second_timeout = false; xhci = (struct xhci_hcd *) data; /* mark this command to be cancelled */ spin_lock_irqsave(&xhci->lock, flags); if (xhci->current_cmd) { - cur_cmd = xhci->current_cmd; - cur_cmd->status = COMP_CMD_ABORT; + if (xhci->current_cmd->status == COMP_CMD_ABORT) + second_timeout = true; + xhci->current_cmd->status = COMP_CMD_ABORT; } - /* Make sure command ring is running before aborting it */ hw_ring_state = xhci_read_64(xhci, &xhci->op_regs->cmd_ring); if ((xhci->cmd_ring_state & CMD_RING_STATE_RUNNING) && (hw_ring_state & CMD_RING_RUNNING)) { - spin_unlock_irqrestore(&xhci->lock, flags); xhci_dbg(xhci, "Command timeout\n"); ret = xhci_abort_cmd_ring(xhci); @@ -1273,6 +1281,15 @@ void xhci_handle_command_timeout(unsigned long data) } return; } + + /* command ring failed to restart, or host removed. Bail out */ + if (second_timeout || xhci->xhc_state & XHCI_STATE_REMOVING) { + spin_unlock_irqrestore(&xhci->lock, flags); + xhci_dbg(xhci, "command timed out twice, ring start fail?\n"); + xhci_cleanup_command_queue(xhci); + return; + } + /* command timeout on stopped ring, ring can't be aborted */ xhci_dbg(xhci, "Command timeout on stopped ring\n"); xhci_handle_stopped_cmd_ring(xhci, xhci->current_cmd); @@ -2721,7 +2738,8 @@ hw_died: writel(irq_pending, &xhci->ir_set->irq_pending); } - if (xhci->xhc_state & XHCI_STATE_DYING) { + if (xhci->xhc_state & XHCI_STATE_DYING || + xhci->xhc_state & XHCI_STATE_HALTED) { xhci_dbg(xhci, "xHCI dying, ignoring interrupt. " "Shouldn't IRQs be disabled?\n"); /* Clear the event handler busy flag (RW1C); diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index fa7e1ef36cd9..f2f9518c53ab 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -685,20 +685,23 @@ void xhci_stop(struct usb_hcd *hcd) u32 temp; struct xhci_hcd *xhci = hcd_to_xhci(hcd); - if (xhci->xhc_state & XHCI_STATE_HALTED) - return; - mutex_lock(&xhci->mutex); - spin_lock_irq(&xhci->lock); - xhci->xhc_state |= XHCI_STATE_HALTED; - xhci->cmd_ring_state = CMD_RING_STATE_STOPPED; - /* Make sure the xHC is halted for a USB3 roothub - * (xhci_stop() could be called as part of failed init). - */ - xhci_halt(xhci); - xhci_reset(xhci); - spin_unlock_irq(&xhci->lock); + if (!(xhci->xhc_state & XHCI_STATE_HALTED)) { + spin_lock_irq(&xhci->lock); + + xhci->xhc_state |= XHCI_STATE_HALTED; + xhci->cmd_ring_state = CMD_RING_STATE_STOPPED; + xhci_halt(xhci); + xhci_reset(xhci); + + spin_unlock_irq(&xhci->lock); + } + + if (!usb_hcd_is_primary_hcd(hcd)) { + mutex_unlock(&xhci->mutex); + return; + } xhci_cleanup_msix(xhci); @@ -4886,7 +4889,7 @@ int xhci_gen_setup(struct usb_hcd *hcd, xhci_get_quirks_t get_quirks) xhci->hcc_params2 = readl(&xhci->cap_regs->hcc_params2); xhci_print_registers(xhci); - xhci->quirks = quirks; + xhci->quirks |= quirks; get_quirks(dev, xhci); diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index 39fd95833eb8..f824336def5c 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -1090,29 +1090,6 @@ void musb_stop(struct musb *musb) musb_platform_try_idle(musb, 0); } -static void musb_shutdown(struct platform_device *pdev) -{ - struct musb *musb = dev_to_musb(&pdev->dev); - unsigned long flags; - - pm_runtime_get_sync(musb->controller); - - musb_host_cleanup(musb); - musb_gadget_cleanup(musb); - - spin_lock_irqsave(&musb->lock, flags); - musb_platform_disable(musb); - musb_generic_disable(musb); - spin_unlock_irqrestore(&musb->lock, flags); - - musb_writeb(musb->mregs, MUSB_DEVCTL, 0); - musb_platform_exit(musb); - - pm_runtime_put(musb->controller); - /* FIXME power down */ -} - - /*-------------------------------------------------------------------------*/ /* @@ -1702,7 +1679,7 @@ EXPORT_SYMBOL_GPL(musb_dma_completion); #define use_dma 0 #endif -static void (*musb_phy_callback)(enum musb_vbus_id_status status); +static int (*musb_phy_callback)(enum musb_vbus_id_status status); /* * musb_mailbox - optional phy notifier function @@ -1711,11 +1688,12 @@ static void (*musb_phy_callback)(enum musb_vbus_id_status status); * Optionally gets called from the USB PHY. Note that the USB PHY must be * disabled at the point the phy_callback is registered or unregistered. */ -void musb_mailbox(enum musb_vbus_id_status status) +int musb_mailbox(enum musb_vbus_id_status status) { if (musb_phy_callback) - musb_phy_callback(status); + return musb_phy_callback(status); + return -ENODEV; }; EXPORT_SYMBOL_GPL(musb_mailbox); @@ -2028,11 +2006,6 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl) musb_readl = musb_default_readl; musb_writel = musb_default_writel; - /* We need musb_read/write functions initialized for PM */ - pm_runtime_use_autosuspend(musb->controller); - pm_runtime_set_autosuspend_delay(musb->controller, 200); - pm_runtime_enable(musb->controller); - /* The musb_platform_init() call: * - adjusts musb->mregs * - sets the musb->isr @@ -2134,6 +2107,16 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl) if (musb->ops->phy_callback) musb_phy_callback = musb->ops->phy_callback; + /* + * We need musb_read/write functions initialized for PM. + * Note that at least 2430 glue needs autosuspend delay + * somewhere above 300 ms for the hardware to idle properly + * after disconnecting the cable in host mode. Let's use + * 500 ms for some margin. + */ + pm_runtime_use_autosuspend(musb->controller); + pm_runtime_set_autosuspend_delay(musb->controller, 500); + pm_runtime_enable(musb->controller); pm_runtime_get_sync(musb->controller); status = usb_phy_init(musb->xceiv); @@ -2237,13 +2220,8 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl) if (status) goto fail5; - pm_runtime_put(musb->controller); - - /* - * For why this is currently needed, see commit 3e43a0725637 - * ("usb: musb: core: add pm_runtime_irq_safe()") - */ - pm_runtime_irq_safe(musb->controller); + pm_runtime_mark_last_busy(musb->controller); + pm_runtime_put_autosuspend(musb->controller); return 0; @@ -2265,7 +2243,9 @@ fail2_5: usb_phy_shutdown(musb->xceiv); err_usb_phy_init: + pm_runtime_dont_use_autosuspend(musb->controller); pm_runtime_put_sync(musb->controller); + pm_runtime_disable(musb->controller); fail2: if (musb->irq_wake) @@ -2273,7 +2253,6 @@ fail2: musb_platform_exit(musb); fail1: - pm_runtime_disable(musb->controller); dev_err(musb->controller, "musb_init_controller failed with status %d\n", status); @@ -2312,6 +2291,7 @@ static int musb_remove(struct platform_device *pdev) { struct device *dev = &pdev->dev; struct musb *musb = dev_to_musb(dev); + unsigned long flags; /* this gets called on rmmod. * - Host mode: host may still be active @@ -2319,17 +2299,26 @@ static int musb_remove(struct platform_device *pdev) * - OTG mode: both roles are deactivated (or never-activated) */ musb_exit_debugfs(musb); - musb_shutdown(pdev); - musb_phy_callback = NULL; - - if (musb->dma_controller) - musb_dma_controller_destroy(musb->dma_controller); - - usb_phy_shutdown(musb->xceiv); cancel_work_sync(&musb->irq_work); cancel_delayed_work_sync(&musb->finish_resume_work); cancel_delayed_work_sync(&musb->deassert_reset_work); + pm_runtime_get_sync(musb->controller); + musb_host_cleanup(musb); + musb_gadget_cleanup(musb); + spin_lock_irqsave(&musb->lock, flags); + musb_platform_disable(musb); + musb_generic_disable(musb); + spin_unlock_irqrestore(&musb->lock, flags); + musb_writeb(musb->mregs, MUSB_DEVCTL, 0); + pm_runtime_dont_use_autosuspend(musb->controller); + pm_runtime_put_sync(musb->controller); + pm_runtime_disable(musb->controller); + musb_platform_exit(musb); + musb_phy_callback = NULL; + if (musb->dma_controller) + musb_dma_controller_destroy(musb->dma_controller); + usb_phy_shutdown(musb->xceiv); musb_free(musb); device_init_wakeup(dev, 0); return 0; @@ -2429,7 +2418,8 @@ static void musb_restore_context(struct musb *musb) musb_writew(musb_base, MUSB_INTRTXE, musb->intrtxe); musb_writew(musb_base, MUSB_INTRRXE, musb->intrrxe); musb_writeb(musb_base, MUSB_INTRUSBE, musb->context.intrusbe); - musb_writeb(musb_base, MUSB_DEVCTL, musb->context.devctl); + if (musb->context.devctl & MUSB_DEVCTL_SESSION) + musb_writeb(musb_base, MUSB_DEVCTL, musb->context.devctl); for (i = 0; i < musb->config->num_eps; ++i) { struct musb_hw_ep *hw_ep; @@ -2612,7 +2602,6 @@ static struct platform_driver musb_driver = { }, .probe = musb_probe, .remove = musb_remove, - .shutdown = musb_shutdown, }; module_platform_driver(musb_driver); diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h index b6afe9e43305..b55a776b03eb 100644 --- a/drivers/usb/musb/musb_core.h +++ b/drivers/usb/musb/musb_core.h @@ -215,7 +215,7 @@ struct musb_platform_ops { dma_addr_t *dma_addr, u32 *len); void (*pre_root_reset_end)(struct musb *musb); void (*post_root_reset_end)(struct musb *musb); - void (*phy_callback)(enum musb_vbus_id_status status); + int (*phy_callback)(enum musb_vbus_id_status status); }; /* @@ -312,6 +312,7 @@ struct musb { struct work_struct irq_work; struct delayed_work deassert_reset_work; struct delayed_work finish_resume_work; + struct delayed_work gadget_work; u16 hwvers; u16 intrrxe; diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c index 152865b36522..af2a3a7addf9 100644 --- a/drivers/usb/musb/musb_gadget.c +++ b/drivers/usb/musb/musb_gadget.c @@ -1656,6 +1656,20 @@ static int musb_gadget_vbus_draw(struct usb_gadget *gadget, unsigned mA) return usb_phy_set_power(musb->xceiv, mA); } +static void musb_gadget_work(struct work_struct *work) +{ + struct musb *musb; + unsigned long flags; + + musb = container_of(work, struct musb, gadget_work.work); + pm_runtime_get_sync(musb->controller); + spin_lock_irqsave(&musb->lock, flags); + musb_pullup(musb, musb->softconnect); + spin_unlock_irqrestore(&musb->lock, flags); + pm_runtime_mark_last_busy(musb->controller); + pm_runtime_put_autosuspend(musb->controller); +} + static int musb_gadget_pullup(struct usb_gadget *gadget, int is_on) { struct musb *musb = gadget_to_musb(gadget); @@ -1663,20 +1677,16 @@ static int musb_gadget_pullup(struct usb_gadget *gadget, int is_on) is_on = !!is_on; - pm_runtime_get_sync(musb->controller); - /* NOTE: this assumes we are sensing vbus; we'd rather * not pullup unless the B-session is active. */ spin_lock_irqsave(&musb->lock, flags); if (is_on != musb->softconnect) { musb->softconnect = is_on; - musb_pullup(musb, is_on); + schedule_delayed_work(&musb->gadget_work, 0); } spin_unlock_irqrestore(&musb->lock, flags); - pm_runtime_put(musb->controller); - return 0; } @@ -1845,7 +1855,7 @@ int musb_gadget_setup(struct musb *musb) #elif IS_ENABLED(CONFIG_USB_MUSB_GADGET) musb->g.is_otg = 0; #endif - + INIT_DELAYED_WORK(&musb->gadget_work, musb_gadget_work); musb_g_init_endpoints(musb); musb->is_active = 0; @@ -1866,6 +1876,8 @@ void musb_gadget_cleanup(struct musb *musb) { if (musb->port_mode == MUSB_PORT_MODE_HOST) return; + + cancel_delayed_work_sync(&musb->gadget_work); usb_del_gadget_udc(&musb->g); } @@ -1914,8 +1926,8 @@ static int musb_gadget_start(struct usb_gadget *g, if (musb->xceiv->last_event == USB_EVENT_ID) musb_platform_set_vbus(musb, 1); - if (musb->xceiv->last_event == USB_EVENT_NONE) - pm_runtime_put(musb->controller); + pm_runtime_mark_last_busy(musb->controller); + pm_runtime_put_autosuspend(musb->controller); return 0; @@ -1934,8 +1946,7 @@ static int musb_gadget_stop(struct usb_gadget *g) struct musb *musb = gadget_to_musb(g); unsigned long flags; - if (musb->xceiv->last_event == USB_EVENT_NONE) - pm_runtime_get_sync(musb->controller); + pm_runtime_get_sync(musb->controller); /* * REVISIT always use otg_set_peripheral() here too; @@ -1963,7 +1974,8 @@ static int musb_gadget_stop(struct usb_gadget *g) * that currently misbehaves. */ - pm_runtime_put(musb->controller); + pm_runtime_mark_last_busy(musb->controller); + pm_runtime_put_autosuspend(musb->controller); return 0; } diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c index 2f8ad7f1f482..d227a71d85e1 100644 --- a/drivers/usb/musb/musb_host.c +++ b/drivers/usb/musb/musb_host.c @@ -434,7 +434,13 @@ static void musb_advance_schedule(struct musb *musb, struct urb *urb, } } - if (qh != NULL && qh->is_ready) { + /* + * The pipe must be broken if current urb->status is set, so don't + * start next urb. + * TODO: to minimize the risk of regression, only check urb->status + * for RX, until we have a test case to understand the behavior of TX. + */ + if ((!status || !is_in) && qh && qh->is_ready) { dev_dbg(musb->controller, "... next ep%d %cX urb %p\n", hw_ep->epnum, is_in ? 'R' : 'T', next_urb(qh)); musb_start_urb(musb, is_in, qh); @@ -594,14 +600,13 @@ musb_rx_reinit(struct musb *musb, struct musb_qh *qh, u8 epnum) musb_writew(ep->regs, MUSB_TXCSR, 0); /* scrub all previous state, clearing toggle */ - } else { - csr = musb_readw(ep->regs, MUSB_RXCSR); - if (csr & MUSB_RXCSR_RXPKTRDY) - WARNING("rx%d, packet/%d ready?\n", ep->epnum, - musb_readw(ep->regs, MUSB_RXCOUNT)); - - musb_h_flush_rxfifo(ep, MUSB_RXCSR_CLRDATATOG); } + csr = musb_readw(ep->regs, MUSB_RXCSR); + if (csr & MUSB_RXCSR_RXPKTRDY) + WARNING("rx%d, packet/%d ready?\n", ep->epnum, + musb_readw(ep->regs, MUSB_RXCOUNT)); + + musb_h_flush_rxfifo(ep, MUSB_RXCSR_CLRDATATOG); /* target addr and (for multipoint) hub addr/port */ if (musb->is_multipoint) { @@ -627,7 +632,7 @@ musb_rx_reinit(struct musb *musb, struct musb_qh *qh, u8 epnum) ep->rx_reinit = 0; } -static int musb_tx_dma_set_mode_mentor(struct dma_controller *dma, +static void musb_tx_dma_set_mode_mentor(struct dma_controller *dma, struct musb_hw_ep *hw_ep, struct musb_qh *qh, struct urb *urb, u32 offset, u32 *length, u8 *mode) @@ -664,23 +669,18 @@ static int musb_tx_dma_set_mode_mentor(struct dma_controller *dma, } channel->desired_mode = *mode; musb_writew(epio, MUSB_TXCSR, csr); - - return 0; } -static int musb_tx_dma_set_mode_cppi_tusb(struct dma_controller *dma, - struct musb_hw_ep *hw_ep, - struct musb_qh *qh, - struct urb *urb, - u32 offset, - u32 *length, - u8 *mode) +static void musb_tx_dma_set_mode_cppi_tusb(struct dma_controller *dma, + struct musb_hw_ep *hw_ep, + struct musb_qh *qh, + struct urb *urb, + u32 offset, + u32 *length, + u8 *mode) { struct dma_channel *channel = hw_ep->tx_channel; - if (!is_cppi_enabled(hw_ep->musb) && !tusb_dma_omap(hw_ep->musb)) - return -ENODEV; - channel->actual_len = 0; /* @@ -688,8 +688,6 @@ static int musb_tx_dma_set_mode_cppi_tusb(struct dma_controller *dma, * to identify the zero-length-final-packet case. */ *mode = (urb->transfer_flags & URB_ZERO_PACKET) ? 1 : 0; - - return 0; } static bool musb_tx_dma_program(struct dma_controller *dma, @@ -699,15 +697,14 @@ static bool musb_tx_dma_program(struct dma_controller *dma, struct dma_channel *channel = hw_ep->tx_channel; u16 pkt_size = qh->maxpacket; u8 mode; - int res; if (musb_dma_inventra(hw_ep->musb) || musb_dma_ux500(hw_ep->musb)) - res = musb_tx_dma_set_mode_mentor(dma, hw_ep, qh, urb, - offset, &length, &mode); + musb_tx_dma_set_mode_mentor(dma, hw_ep, qh, urb, offset, + &length, &mode); + else if (is_cppi_enabled(hw_ep->musb) || tusb_dma_omap(hw_ep->musb)) + musb_tx_dma_set_mode_cppi_tusb(dma, hw_ep, qh, urb, offset, + &length, &mode); else - res = musb_tx_dma_set_mode_cppi_tusb(dma, hw_ep, qh, urb, - offset, &length, &mode); - if (res) return false; qh->segsize = length; @@ -995,9 +992,15 @@ static void musb_bulk_nak_timeout(struct musb *musb, struct musb_hw_ep *ep, if (is_in) { dma = is_dma_capable() ? ep->rx_channel : NULL; - /* clear nak timeout bit */ + /* + * Need to stop the transaction by clearing REQPKT first + * then the NAK Timeout bit ref MUSBMHDRC USB 2.0 HIGH-SPEED + * DUAL-ROLE CONTROLLER Programmer's Guide, section 9.2.2 + */ rx_csr = musb_readw(epio, MUSB_RXCSR); rx_csr |= MUSB_RXCSR_H_WZC_BITS; + rx_csr &= ~MUSB_RXCSR_H_REQPKT; + musb_writew(epio, MUSB_RXCSR, rx_csr); rx_csr &= ~MUSB_RXCSR_DATAERROR; musb_writew(epio, MUSB_RXCSR, rx_csr); @@ -1551,7 +1554,7 @@ static int musb_rx_dma_iso_cppi41(struct dma_controller *dma, struct urb *urb, size_t len) { - struct dma_channel *channel = hw_ep->tx_channel; + struct dma_channel *channel = hw_ep->rx_channel; void __iomem *epio = hw_ep->regs; dma_addr_t *buf; u32 length, res; @@ -1870,6 +1873,9 @@ void musb_host_rx(struct musb *musb, u8 epnum) status = -EPROTO; musb_writeb(epio, MUSB_RXINTERVAL, 0); + rx_csr &= ~MUSB_RXCSR_H_ERROR; + musb_writew(epio, MUSB_RXCSR, rx_csr); + } else if (rx_csr & MUSB_RXCSR_DATAERROR) { if (USB_ENDPOINT_XFER_ISOC != qh->type) { diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c index c84e0322c108..0b4cec940386 100644 --- a/drivers/usb/musb/omap2430.c +++ b/drivers/usb/musb/omap2430.c @@ -49,97 +49,14 @@ struct omap2430_glue { enum musb_vbus_id_status status; struct work_struct omap_musb_mailbox_work; struct device *control_otghs; + bool cable_connected; + bool enabled; + bool powered; }; #define glue_to_musb(g) platform_get_drvdata(g->musb) static struct omap2430_glue *_glue; -static struct timer_list musb_idle_timer; - -static void musb_do_idle(unsigned long _musb) -{ - struct musb *musb = (void *)_musb; - unsigned long flags; - u8 power; - u8 devctl; - - spin_lock_irqsave(&musb->lock, flags); - - switch (musb->xceiv->otg->state) { - case OTG_STATE_A_WAIT_BCON: - - devctl = musb_readb(musb->mregs, MUSB_DEVCTL); - if (devctl & MUSB_DEVCTL_BDEVICE) { - musb->xceiv->otg->state = OTG_STATE_B_IDLE; - MUSB_DEV_MODE(musb); - } else { - musb->xceiv->otg->state = OTG_STATE_A_IDLE; - MUSB_HST_MODE(musb); - } - break; - case OTG_STATE_A_SUSPEND: - /* finish RESUME signaling? */ - if (musb->port1_status & MUSB_PORT_STAT_RESUME) { - power = musb_readb(musb->mregs, MUSB_POWER); - power &= ~MUSB_POWER_RESUME; - dev_dbg(musb->controller, "root port resume stopped, power %02x\n", power); - musb_writeb(musb->mregs, MUSB_POWER, power); - musb->is_active = 1; - musb->port1_status &= ~(USB_PORT_STAT_SUSPEND - | MUSB_PORT_STAT_RESUME); - musb->port1_status |= USB_PORT_STAT_C_SUSPEND << 16; - usb_hcd_poll_rh_status(musb->hcd); - /* NOTE: it might really be A_WAIT_BCON ... */ - musb->xceiv->otg->state = OTG_STATE_A_HOST; - } - break; - case OTG_STATE_A_HOST: - devctl = musb_readb(musb->mregs, MUSB_DEVCTL); - if (devctl & MUSB_DEVCTL_BDEVICE) - musb->xceiv->otg->state = OTG_STATE_B_IDLE; - else - musb->xceiv->otg->state = OTG_STATE_A_WAIT_BCON; - default: - break; - } - spin_unlock_irqrestore(&musb->lock, flags); -} - - -static void omap2430_musb_try_idle(struct musb *musb, unsigned long timeout) -{ - unsigned long default_timeout = jiffies + msecs_to_jiffies(3); - static unsigned long last_timer; - - if (timeout == 0) - timeout = default_timeout; - - /* Never idle if active, or when VBUS timeout is not set as host */ - if (musb->is_active || ((musb->a_wait_bcon == 0) - && (musb->xceiv->otg->state == OTG_STATE_A_WAIT_BCON))) { - dev_dbg(musb->controller, "%s active, deleting timer\n", - usb_otg_state_string(musb->xceiv->otg->state)); - del_timer(&musb_idle_timer); - last_timer = jiffies; - return; - } - - if (time_after(last_timer, timeout)) { - if (!timer_pending(&musb_idle_timer)) - last_timer = timeout; - else { - dev_dbg(musb->controller, "Longer idle timer already pending, ignoring\n"); - return; - } - } - last_timer = timeout; - - dev_dbg(musb->controller, "%s inactive, for idle timer for %lu ms\n", - usb_otg_state_string(musb->xceiv->otg->state), - (unsigned long)jiffies_to_msecs(timeout - jiffies)); - mod_timer(&musb_idle_timer, timeout); -} - static void omap2430_musb_set_vbus(struct musb *musb, int is_on) { struct usb_otg *otg = musb->xceiv->otg; @@ -205,16 +122,6 @@ static void omap2430_musb_set_vbus(struct musb *musb, int is_on) musb_readb(musb->mregs, MUSB_DEVCTL)); } -static int omap2430_musb_set_mode(struct musb *musb, u8 musb_mode) -{ - u8 devctl = musb_readb(musb->mregs, MUSB_DEVCTL); - - devctl |= MUSB_DEVCTL_SESSION; - musb_writeb(musb->mregs, MUSB_DEVCTL, devctl); - - return 0; -} - static inline void omap2430_low_level_exit(struct musb *musb) { u32 l; @@ -234,22 +141,63 @@ static inline void omap2430_low_level_init(struct musb *musb) musb_writel(musb->mregs, OTG_FORCESTDBY, l); } -static void omap2430_musb_mailbox(enum musb_vbus_id_status status) +/* + * We can get multiple cable events so we need to keep track + * of the power state. Only keep power enabled if USB cable is + * connected and a gadget is started. + */ +static void omap2430_set_power(struct musb *musb, bool enabled, bool cable) +{ + struct device *dev = musb->controller; + struct omap2430_glue *glue = dev_get_drvdata(dev->parent); + bool power_up; + int res; + + if (glue->enabled != enabled) + glue->enabled = enabled; + + if (glue->cable_connected != cable) + glue->cable_connected = cable; + + power_up = glue->enabled && glue->cable_connected; + if (power_up == glue->powered) { + dev_warn(musb->controller, "power state already %i\n", + power_up); + return; + } + + glue->powered = power_up; + + if (power_up) { + res = pm_runtime_get_sync(musb->controller); + if (res < 0) { + dev_err(musb->controller, "could not enable: %i", res); + glue->powered = false; + } + } else { + pm_runtime_mark_last_busy(musb->controller); + pm_runtime_put_autosuspend(musb->controller); + } +} + +static int omap2430_musb_mailbox(enum musb_vbus_id_status status) { struct omap2430_glue *glue = _glue; if (!glue) { pr_err("%s: musb core is not yet initialized\n", __func__); - return; + return -EPROBE_DEFER; } glue->status = status; if (!glue_to_musb(glue)) { pr_err("%s: musb core is not yet ready\n", __func__); - return; + return -EPROBE_DEFER; } schedule_work(&glue->omap_musb_mailbox_work); + + return 0; } static void omap_musb_set_mailbox(struct omap2430_glue *glue) @@ -259,6 +207,13 @@ static void omap_musb_set_mailbox(struct omap2430_glue *glue) struct musb_hdrc_platform_data *pdata = dev_get_platdata(dev); struct omap_musb_board_data *data = pdata->board_data; struct usb_otg *otg = musb->xceiv->otg; + bool cable_connected; + + cable_connected = ((glue->status == MUSB_ID_GROUND) || + (glue->status == MUSB_VBUS_VALID)); + + if (cable_connected) + omap2430_set_power(musb, glue->enabled, cable_connected); switch (glue->status) { case MUSB_ID_GROUND: @@ -268,7 +223,6 @@ static void omap_musb_set_mailbox(struct omap2430_glue *glue) musb->xceiv->otg->state = OTG_STATE_A_IDLE; musb->xceiv->last_event = USB_EVENT_ID; if (musb->gadget_driver) { - pm_runtime_get_sync(dev); omap_control_usb_set_mode(glue->control_otghs, USB_MODE_HOST); omap2430_musb_set_vbus(musb, 1); @@ -281,8 +235,6 @@ static void omap_musb_set_mailbox(struct omap2430_glue *glue) otg->default_a = false; musb->xceiv->otg->state = OTG_STATE_B_IDLE; musb->xceiv->last_event = USB_EVENT_VBUS; - if (musb->gadget_driver) - pm_runtime_get_sync(dev); omap_control_usb_set_mode(glue->control_otghs, USB_MODE_DEVICE); break; @@ -291,11 +243,8 @@ static void omap_musb_set_mailbox(struct omap2430_glue *glue) dev_dbg(dev, "VBUS Disconnect\n"); musb->xceiv->last_event = USB_EVENT_NONE; - if (musb->gadget_driver) { + if (musb->gadget_driver) omap2430_musb_set_vbus(musb, 0); - pm_runtime_mark_last_busy(dev); - pm_runtime_put_autosuspend(dev); - } if (data->interface_type == MUSB_INTERFACE_UTMI) otg_set_vbus(musb->xceiv->otg, 0); @@ -307,6 +256,9 @@ static void omap_musb_set_mailbox(struct omap2430_glue *glue) dev_dbg(dev, "ID float\n"); } + if (!cable_connected) + omap2430_set_power(musb, glue->enabled, cable_connected); + atomic_notifier_call_chain(&musb->xceiv->notifier, musb->xceiv->last_event, NULL); } @@ -316,13 +268,8 @@ static void omap_musb_mailbox_work(struct work_struct *mailbox_work) { struct omap2430_glue *glue = container_of(mailbox_work, struct omap2430_glue, omap_musb_mailbox_work); - struct musb *musb = glue_to_musb(glue); - struct device *dev = musb->controller; - pm_runtime_get_sync(dev); omap_musb_set_mailbox(glue); - pm_runtime_mark_last_busy(dev); - pm_runtime_put_autosuspend(dev); } static irqreturn_t omap2430_musb_interrupt(int irq, void *__hci) @@ -389,23 +336,7 @@ static int omap2430_musb_init(struct musb *musb) return PTR_ERR(musb->phy); } musb->isr = omap2430_musb_interrupt; - - /* - * Enable runtime PM for musb parent (this driver). We can't - * do it earlier as struct musb is not yet allocated and we - * need to touch the musb registers for runtime PM. - */ - pm_runtime_enable(glue->dev); - status = pm_runtime_get_sync(glue->dev); - if (status < 0) - goto err1; - - status = pm_runtime_get_sync(dev); - if (status < 0) { - dev_err(dev, "pm_runtime_get_sync FAILED %d\n", status); - pm_runtime_put_sync(glue->dev); - goto err1; - } + phy_init(musb->phy); l = musb_readl(musb->mregs, OTG_INTERFSEL); @@ -427,20 +358,10 @@ static int omap2430_musb_init(struct musb *musb) musb_readl(musb->mregs, OTG_INTERFSEL), musb_readl(musb->mregs, OTG_SIMENABLE)); - setup_timer(&musb_idle_timer, musb_do_idle, (unsigned long) musb); - if (glue->status != MUSB_UNKNOWN) omap_musb_set_mailbox(glue); - phy_init(musb->phy); - phy_power_on(musb->phy); - - pm_runtime_put_noidle(musb->controller); - pm_runtime_put_noidle(glue->dev); return 0; - -err1: - return status; } static void omap2430_musb_enable(struct musb *musb) @@ -452,6 +373,11 @@ static void omap2430_musb_enable(struct musb *musb) struct musb_hdrc_platform_data *pdata = dev_get_platdata(dev); struct omap_musb_board_data *data = pdata->board_data; + if (!WARN_ON(!musb->phy)) + phy_power_on(musb->phy); + + omap2430_set_power(musb, true, glue->cable_connected); + switch (glue->status) { case MUSB_ID_GROUND: @@ -487,18 +413,25 @@ static void omap2430_musb_disable(struct musb *musb) struct device *dev = musb->controller; struct omap2430_glue *glue = dev_get_drvdata(dev->parent); + if (!WARN_ON(!musb->phy)) + phy_power_off(musb->phy); + if (glue->status != MUSB_UNKNOWN) omap_control_usb_set_mode(glue->control_otghs, USB_MODE_DISCONNECT); + + omap2430_set_power(musb, false, glue->cable_connected); } static int omap2430_musb_exit(struct musb *musb) { - del_timer_sync(&musb_idle_timer); + struct device *dev = musb->controller; + struct omap2430_glue *glue = dev_get_drvdata(dev->parent); omap2430_low_level_exit(musb); - phy_power_off(musb->phy); phy_exit(musb->phy); + musb->phy = NULL; + cancel_work_sync(&glue->omap_musb_mailbox_work); return 0; } @@ -512,9 +445,6 @@ static const struct musb_platform_ops omap2430_ops = { .init = omap2430_musb_init, .exit = omap2430_musb_exit, - .set_mode = omap2430_musb_set_mode, - .try_idle = omap2430_musb_try_idle, - .set_vbus = omap2430_musb_set_vbus, .enable = omap2430_musb_enable, @@ -639,11 +569,9 @@ static int omap2430_probe(struct platform_device *pdev) goto err2; } - /* - * Note that we cannot enable PM runtime yet for this - * driver as we need struct musb initialized first. - * See omap2430_musb_init above. - */ + pm_runtime_enable(glue->dev); + pm_runtime_use_autosuspend(glue->dev); + pm_runtime_set_autosuspend_delay(glue->dev, 500); ret = platform_device_add(musb); if (ret) { @@ -662,12 +590,14 @@ err0: static int omap2430_remove(struct platform_device *pdev) { - struct omap2430_glue *glue = platform_get_drvdata(pdev); + struct omap2430_glue *glue = platform_get_drvdata(pdev); + struct musb *musb = glue_to_musb(glue); pm_runtime_get_sync(glue->dev); - cancel_work_sync(&glue->omap_musb_mailbox_work); platform_device_unregister(glue->musb); + omap2430_set_power(musb, false, false); pm_runtime_put_sync(glue->dev); + pm_runtime_dont_use_autosuspend(glue->dev); pm_runtime_disable(glue->dev); return 0; @@ -680,12 +610,13 @@ static int omap2430_runtime_suspend(struct device *dev) struct omap2430_glue *glue = dev_get_drvdata(dev); struct musb *musb = glue_to_musb(glue); - if (musb) { - musb->context.otg_interfsel = musb_readl(musb->mregs, - OTG_INTERFSEL); + if (!musb) + return 0; - omap2430_low_level_exit(musb); - } + musb->context.otg_interfsel = musb_readl(musb->mregs, + OTG_INTERFSEL); + + omap2430_low_level_exit(musb); return 0; } @@ -696,7 +627,7 @@ static int omap2430_runtime_resume(struct device *dev) struct musb *musb = glue_to_musb(glue); if (!musb) - return -EPROBE_DEFER; + return 0; omap2430_low_level_init(musb); musb_writel(musb->mregs, OTG_INTERFSEL, @@ -738,18 +669,8 @@ static struct platform_driver omap2430_driver = { }, }; +module_platform_driver(omap2430_driver); + MODULE_DESCRIPTION("OMAP2PLUS MUSB Glue Layer"); MODULE_AUTHOR("Felipe Balbi <balbi@ti.com>"); MODULE_LICENSE("GPL v2"); - -static int __init omap2430_init(void) -{ - return platform_driver_register(&omap2430_driver); -} -subsys_initcall(omap2430_init); - -static void __exit omap2430_exit(void) -{ - platform_driver_unregister(&omap2430_driver); -} -module_exit(omap2430_exit); diff --git a/drivers/usb/musb/sunxi.c b/drivers/usb/musb/sunxi.c index fdab4232cfbf..76500515dd8b 100644 --- a/drivers/usb/musb/sunxi.c +++ b/drivers/usb/musb/sunxi.c @@ -80,7 +80,8 @@ static struct musb *sunxi_musb; struct sunxi_glue { struct device *dev; - struct platform_device *musb; + struct musb *musb; + struct platform_device *musb_pdev; struct clk *clk; struct reset_control *rst; struct phy *phy; @@ -102,7 +103,7 @@ static void sunxi_musb_work(struct work_struct *work) return; if (test_and_clear_bit(SUNXI_MUSB_FL_HOSTMODE_PEND, &glue->flags)) { - struct musb *musb = platform_get_drvdata(glue->musb); + struct musb *musb = glue->musb; unsigned long flags; u8 devctl; @@ -112,7 +113,7 @@ static void sunxi_musb_work(struct work_struct *work) if (test_bit(SUNXI_MUSB_FL_HOSTMODE, &glue->flags)) { set_bit(SUNXI_MUSB_FL_VBUS_ON, &glue->flags); musb->xceiv->otg->default_a = 1; - musb->xceiv->otg->state = OTG_STATE_A_IDLE; + musb->xceiv->otg->state = OTG_STATE_A_WAIT_VRISE; MUSB_HST_MODE(musb); devctl |= MUSB_DEVCTL_SESSION; } else { @@ -145,10 +146,12 @@ static void sunxi_musb_set_vbus(struct musb *musb, int is_on) { struct sunxi_glue *glue = dev_get_drvdata(musb->controller->parent); - if (is_on) + if (is_on) { set_bit(SUNXI_MUSB_FL_VBUS_ON, &glue->flags); - else + musb->xceiv->otg->state = OTG_STATE_A_WAIT_VRISE; + } else { clear_bit(SUNXI_MUSB_FL_VBUS_ON, &glue->flags); + } schedule_work(&glue->work); } @@ -264,15 +267,6 @@ static int sunxi_musb_init(struct musb *musb) if (ret) goto error_unregister_notifier; - if (musb->port_mode == MUSB_PORT_MODE_HOST) { - ret = phy_power_on(glue->phy); - if (ret) - goto error_phy_exit; - set_bit(SUNXI_MUSB_FL_PHY_ON, &glue->flags); - /* Stop musb work from turning vbus off again */ - set_bit(SUNXI_MUSB_FL_VBUS_ON, &glue->flags); - } - musb->isr = sunxi_musb_interrupt; /* Stop the musb-core from doing runtime pm (not supported on sunxi) */ @@ -280,8 +274,6 @@ static int sunxi_musb_init(struct musb *musb) return 0; -error_phy_exit: - phy_exit(glue->phy); error_unregister_notifier: if (musb->port_mode == MUSB_PORT_MODE_DUAL_ROLE) extcon_unregister_notifier(glue->extcon, EXTCON_USB_HOST, @@ -323,10 +315,31 @@ static int sunxi_musb_exit(struct musb *musb) return 0; } +static int sunxi_set_mode(struct musb *musb, u8 mode) +{ + struct sunxi_glue *glue = dev_get_drvdata(musb->controller->parent); + int ret; + + if (mode == MUSB_HOST) { + ret = phy_power_on(glue->phy); + if (ret) + return ret; + + set_bit(SUNXI_MUSB_FL_PHY_ON, &glue->flags); + /* Stop musb work from turning vbus off again */ + set_bit(SUNXI_MUSB_FL_VBUS_ON, &glue->flags); + musb->xceiv->otg->state = OTG_STATE_A_WAIT_VRISE; + } + + return 0; +} + static void sunxi_musb_enable(struct musb *musb) { struct sunxi_glue *glue = dev_get_drvdata(musb->controller->parent); + glue->musb = musb; + /* musb_core does not call us in a balanced manner */ if (test_and_set_bit(SUNXI_MUSB_FL_ENABLED, &glue->flags)) return; @@ -569,6 +582,7 @@ static const struct musb_platform_ops sunxi_musb_ops = { .exit = sunxi_musb_exit, .enable = sunxi_musb_enable, .disable = sunxi_musb_disable, + .set_mode = sunxi_set_mode, .fifo_offset = sunxi_musb_fifo_offset, .ep_offset = sunxi_musb_ep_offset, .busctl_offset = sunxi_musb_busctl_offset, @@ -721,9 +735,9 @@ static int sunxi_musb_probe(struct platform_device *pdev) pinfo.data = &pdata; pinfo.size_data = sizeof(pdata); - glue->musb = platform_device_register_full(&pinfo); - if (IS_ERR(glue->musb)) { - ret = PTR_ERR(glue->musb); + glue->musb_pdev = platform_device_register_full(&pinfo); + if (IS_ERR(glue->musb_pdev)) { + ret = PTR_ERR(glue->musb_pdev); dev_err(&pdev->dev, "Error registering musb dev: %d\n", ret); goto err_unregister_usb_phy; } @@ -740,7 +754,7 @@ static int sunxi_musb_remove(struct platform_device *pdev) struct sunxi_glue *glue = platform_get_drvdata(pdev); struct platform_device *usb_phy = glue->usb_phy; - platform_device_unregister(glue->musb); /* Frees glue ! */ + platform_device_unregister(glue->musb_pdev); usb_phy_generic_unregister(usb_phy); return 0; diff --git a/drivers/usb/phy/phy-twl6030-usb.c b/drivers/usb/phy/phy-twl6030-usb.c index 24e2b3cf1867..a72e8d670adc 100644 --- a/drivers/usb/phy/phy-twl6030-usb.c +++ b/drivers/usb/phy/phy-twl6030-usb.c @@ -97,6 +97,9 @@ struct twl6030_usb { struct regulator *usb3v3; + /* used to check initial cable status after probe */ + struct delayed_work get_status_work; + /* used to set vbus, in atomic path */ struct work_struct set_vbus_work; @@ -227,12 +230,16 @@ static irqreturn_t twl6030_usb_irq(int irq, void *_twl) twl->asleep = 1; status = MUSB_VBUS_VALID; twl->linkstat = status; - musb_mailbox(status); + ret = musb_mailbox(status); + if (ret) + twl->linkstat = MUSB_UNKNOWN; } else { if (twl->linkstat != MUSB_UNKNOWN) { status = MUSB_VBUS_OFF; twl->linkstat = status; - musb_mailbox(status); + ret = musb_mailbox(status); + if (ret) + twl->linkstat = MUSB_UNKNOWN; if (twl->asleep) { regulator_disable(twl->usb3v3); twl->asleep = 0; @@ -264,7 +271,9 @@ static irqreturn_t twl6030_usbotg_irq(int irq, void *_twl) twl6030_writeb(twl, TWL_MODULE_USB, 0x10, USB_ID_INT_EN_HI_SET); status = MUSB_ID_GROUND; twl->linkstat = status; - musb_mailbox(status); + ret = musb_mailbox(status); + if (ret) + twl->linkstat = MUSB_UNKNOWN; } else { twl6030_writeb(twl, TWL_MODULE_USB, 0x10, USB_ID_INT_EN_HI_CLR); twl6030_writeb(twl, TWL_MODULE_USB, 0x1, USB_ID_INT_EN_HI_SET); @@ -274,6 +283,15 @@ static irqreturn_t twl6030_usbotg_irq(int irq, void *_twl) return IRQ_HANDLED; } +static void twl6030_status_work(struct work_struct *work) +{ + struct twl6030_usb *twl = container_of(work, struct twl6030_usb, + get_status_work.work); + + twl6030_usb_irq(twl->irq2, twl); + twl6030_usbotg_irq(twl->irq1, twl); +} + static int twl6030_enable_irq(struct twl6030_usb *twl) { twl6030_writeb(twl, TWL_MODULE_USB, 0x1, USB_ID_INT_EN_HI_SET); @@ -284,8 +302,6 @@ static int twl6030_enable_irq(struct twl6030_usb *twl) REG_INT_MSK_LINE_C); twl6030_interrupt_unmask(TWL6030_CHARGER_CTRL_INT_MASK, REG_INT_MSK_STS_C); - twl6030_usb_irq(twl->irq2, twl); - twl6030_usbotg_irq(twl->irq1, twl); return 0; } @@ -371,6 +387,7 @@ static int twl6030_usb_probe(struct platform_device *pdev) dev_warn(&pdev->dev, "could not create sysfs file\n"); INIT_WORK(&twl->set_vbus_work, otg_set_vbus_work); + INIT_DELAYED_WORK(&twl->get_status_work, twl6030_status_work); status = request_threaded_irq(twl->irq1, NULL, twl6030_usbotg_irq, IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING | IRQF_ONESHOT, @@ -395,6 +412,7 @@ static int twl6030_usb_probe(struct platform_device *pdev) twl->asleep = 0; twl6030_enable_irq(twl); + schedule_delayed_work(&twl->get_status_work, HZ); dev_info(&pdev->dev, "Initialized TWL6030 USB module\n"); return 0; @@ -404,6 +422,7 @@ static int twl6030_usb_remove(struct platform_device *pdev) { struct twl6030_usb *twl = platform_get_drvdata(pdev); + cancel_delayed_work(&twl->get_status_work); twl6030_interrupt_mask(TWL6030_USBOTG_INT_MASK, REG_INT_MSK_LINE_C); twl6030_interrupt_mask(TWL6030_USBOTG_INT_MASK, diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c index 2eddbe538cda..5608af4a369d 100644 --- a/drivers/usb/serial/mos7720.c +++ b/drivers/usb/serial/mos7720.c @@ -2007,6 +2007,7 @@ static void mos7720_release(struct usb_serial *serial) urblist_entry) usb_unlink_urb(urbtrack->urb); spin_unlock_irqrestore(&mos_parport->listlock, flags); + parport_del_port(mos_parport->pp); kref_put(&mos_parport->ref_count, destroy_mos_parport); } diff --git a/drivers/usb/storage/uas.c b/drivers/usb/storage/uas.c index 4d49fce406e1..5ef014ba6ae8 100644 --- a/drivers/usb/storage/uas.c +++ b/drivers/usb/storage/uas.c @@ -836,6 +836,7 @@ static int uas_slave_configure(struct scsi_device *sdev) if (devinfo->flags & US_FL_BROKEN_FUA) sdev->broken_fua = 1; + scsi_change_queue_depth(sdev, devinfo->qdepth - 2); return 0; } @@ -848,7 +849,6 @@ static struct scsi_host_template uas_host_template = { .slave_configure = uas_slave_configure, .eh_abort_handler = uas_eh_abort_handler, .eh_bus_reset_handler = uas_eh_bus_reset_handler, - .can_queue = MAX_CMNDS, .this_id = -1, .sg_tablesize = SG_NONE, .skip_settle_delay = 1, diff --git a/drivers/usb/usbip/vhci_hcd.c b/drivers/usb/usbip/vhci_hcd.c index fca51105974e..2e0450bec1b1 100644 --- a/drivers/usb/usbip/vhci_hcd.c +++ b/drivers/usb/usbip/vhci_hcd.c @@ -941,7 +941,7 @@ static void vhci_stop(struct usb_hcd *hcd) static int vhci_get_frame_number(struct usb_hcd *hcd) { - pr_err("Not yet implemented\n"); + dev_err_ratelimited(&hcd->self.root_hub->dev, "Not yet implemented\n"); return 0; } |