summaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
Diffstat (limited to 'drivers')
-rw-r--r--drivers/thunderbolt/switch.c1
-rw-r--r--drivers/thunderbolt/tb.h2
-rw-r--r--drivers/thunderbolt/tunnel.c12
-rw-r--r--drivers/usb/core/message.c91
-rw-r--r--drivers/usb/core/sysfs.c5
-rw-r--r--drivers/usb/dwc3/dwc3-meson-g12a.c15
-rw-r--r--drivers/usb/serial/ftdi_sio.c1
-rw-r--r--drivers/usb/serial/ftdi_sio_ids.h1
-rw-r--r--drivers/usb/serial/option.c22
-rw-r--r--drivers/usb/typec/mux/intel_pmc_mux.c14
-rw-r--r--drivers/usb/typec/ucsi/ucsi_acpi.c4
11 files changed, 87 insertions, 81 deletions
diff --git a/drivers/thunderbolt/switch.c b/drivers/thunderbolt/switch.c
index 3845db569e4c..a921de9ce7cb 100644
--- a/drivers/thunderbolt/switch.c
+++ b/drivers/thunderbolt/switch.c
@@ -684,6 +684,7 @@ static int tb_init_port(struct tb_port *port)
if (res == -ENODEV) {
tb_dbg(port->sw->tb, " Port %d: not implemented\n",
port->port);
+ port->disabled = true;
return 0;
}
return res;
diff --git a/drivers/thunderbolt/tb.h b/drivers/thunderbolt/tb.h
index a413d55b5f8b..3c620a9203c5 100644
--- a/drivers/thunderbolt/tb.h
+++ b/drivers/thunderbolt/tb.h
@@ -186,7 +186,7 @@ struct tb_switch {
* @cap_adap: Offset of the adapter specific capability (%0 if not present)
* @cap_usb4: Offset to the USB4 port capability (%0 if not present)
* @port: Port number on switch
- * @disabled: Disabled by eeprom
+ * @disabled: Disabled by eeprom or enabled but not implemented
* @bonded: true if the port is bonded (two lanes combined as one)
* @dual_link_port: If the switch is connected using two ports, points
* to the other port.
diff --git a/drivers/thunderbolt/tunnel.c b/drivers/thunderbolt/tunnel.c
index 1a7e849840b2..829b6ccdd5d4 100644
--- a/drivers/thunderbolt/tunnel.c
+++ b/drivers/thunderbolt/tunnel.c
@@ -951,10 +951,18 @@ static void tb_usb3_reclaim_available_bandwidth(struct tb_tunnel *tunnel,
int ret, max_rate, allocate_up, allocate_down;
ret = usb4_usb3_port_actual_link_rate(tunnel->src_port);
- if (ret <= 0) {
- tb_tunnel_warn(tunnel, "tunnel is not up\n");
+ if (ret < 0) {
+ tb_tunnel_warn(tunnel, "failed to read actual link rate\n");
return;
+ } else if (!ret) {
+ /* Use maximum link rate if the link valid is not set */
+ ret = usb4_usb3_port_max_link_rate(tunnel->src_port);
+ if (ret < 0) {
+ tb_tunnel_warn(tunnel, "failed to read maximum link rate\n");
+ return;
+ }
}
+
/*
* 90% of the max rate can be allocated for isochronous
* transfers.
diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c
index 6197938dcc2d..ae1de9cc4b09 100644
--- a/drivers/usb/core/message.c
+++ b/drivers/usb/core/message.c
@@ -1205,6 +1205,34 @@ void usb_disable_interface(struct usb_device *dev, struct usb_interface *intf,
}
}
+/*
+ * usb_disable_device_endpoints -- Disable all endpoints for a device
+ * @dev: the device whose endpoints are being disabled
+ * @skip_ep0: 0 to disable endpoint 0, 1 to skip it.
+ */
+static void usb_disable_device_endpoints(struct usb_device *dev, int skip_ep0)
+{
+ struct usb_hcd *hcd = bus_to_hcd(dev->bus);
+ int i;
+
+ if (hcd->driver->check_bandwidth) {
+ /* First pass: Cancel URBs, leave endpoint pointers intact. */
+ for (i = skip_ep0; i < 16; ++i) {
+ usb_disable_endpoint(dev, i, false);
+ usb_disable_endpoint(dev, i + USB_DIR_IN, false);
+ }
+ /* Remove endpoints from the host controller internal state */
+ mutex_lock(hcd->bandwidth_mutex);
+ usb_hcd_alloc_bandwidth(dev, NULL, NULL, NULL);
+ mutex_unlock(hcd->bandwidth_mutex);
+ }
+ /* Second pass: remove endpoint pointers */
+ for (i = skip_ep0; i < 16; ++i) {
+ usb_disable_endpoint(dev, i, true);
+ usb_disable_endpoint(dev, i + USB_DIR_IN, true);
+ }
+}
+
/**
* usb_disable_device - Disable all the endpoints for a USB device
* @dev: the device whose endpoints are being disabled
@@ -1218,7 +1246,6 @@ void usb_disable_interface(struct usb_device *dev, struct usb_interface *intf,
void usb_disable_device(struct usb_device *dev, int skip_ep0)
{
int i;
- struct usb_hcd *hcd = bus_to_hcd(dev->bus);
/* getting rid of interfaces will disconnect
* any drivers bound to them (a key side effect)
@@ -1264,22 +1291,8 @@ void usb_disable_device(struct usb_device *dev, int skip_ep0)
dev_dbg(&dev->dev, "%s nuking %s URBs\n", __func__,
skip_ep0 ? "non-ep0" : "all");
- if (hcd->driver->check_bandwidth) {
- /* First pass: Cancel URBs, leave endpoint pointers intact. */
- for (i = skip_ep0; i < 16; ++i) {
- usb_disable_endpoint(dev, i, false);
- usb_disable_endpoint(dev, i + USB_DIR_IN, false);
- }
- /* Remove endpoints from the host controller internal state */
- mutex_lock(hcd->bandwidth_mutex);
- usb_hcd_alloc_bandwidth(dev, NULL, NULL, NULL);
- mutex_unlock(hcd->bandwidth_mutex);
- /* Second pass: remove endpoint pointers */
- }
- for (i = skip_ep0; i < 16; ++i) {
- usb_disable_endpoint(dev, i, true);
- usb_disable_endpoint(dev, i + USB_DIR_IN, true);
- }
+
+ usb_disable_device_endpoints(dev, skip_ep0);
}
/**
@@ -1522,6 +1535,9 @@ EXPORT_SYMBOL_GPL(usb_set_interface);
* The caller must own the device lock.
*
* Return: Zero on success, else a negative error code.
+ *
+ * If this routine fails the device will probably be in an unusable state
+ * with endpoints disabled, and interfaces only partially enabled.
*/
int usb_reset_configuration(struct usb_device *dev)
{
@@ -1537,10 +1553,7 @@ int usb_reset_configuration(struct usb_device *dev)
* calls during probe() are fine
*/
- for (i = 1; i < 16; ++i) {
- usb_disable_endpoint(dev, i, true);
- usb_disable_endpoint(dev, i + USB_DIR_IN, true);
- }
+ usb_disable_device_endpoints(dev, 1); /* skip ep0*/
config = dev->actconfig;
retval = 0;
@@ -1553,34 +1566,10 @@ int usb_reset_configuration(struct usb_device *dev)
mutex_unlock(hcd->bandwidth_mutex);
return -ENOMEM;
}
- /* Make sure we have enough bandwidth for each alternate setting 0 */
- for (i = 0; i < config->desc.bNumInterfaces; i++) {
- struct usb_interface *intf = config->interface[i];
- struct usb_host_interface *alt;
- alt = usb_altnum_to_altsetting(intf, 0);
- if (!alt)
- alt = &intf->altsetting[0];
- if (alt != intf->cur_altsetting)
- retval = usb_hcd_alloc_bandwidth(dev, NULL,
- intf->cur_altsetting, alt);
- if (retval < 0)
- break;
- }
- /* If not, reinstate the old alternate settings */
+ /* xHCI adds all endpoints in usb_hcd_alloc_bandwidth */
+ retval = usb_hcd_alloc_bandwidth(dev, config, NULL, NULL);
if (retval < 0) {
-reset_old_alts:
- for (i--; i >= 0; i--) {
- struct usb_interface *intf = config->interface[i];
- struct usb_host_interface *alt;
-
- alt = usb_altnum_to_altsetting(intf, 0);
- if (!alt)
- alt = &intf->altsetting[0];
- if (alt != intf->cur_altsetting)
- usb_hcd_alloc_bandwidth(dev, NULL,
- alt, intf->cur_altsetting);
- }
usb_enable_lpm(dev);
mutex_unlock(hcd->bandwidth_mutex);
return retval;
@@ -1589,8 +1578,12 @@ reset_old_alts:
USB_REQ_SET_CONFIGURATION, 0,
config->desc.bConfigurationValue, 0,
NULL, 0, USB_CTRL_SET_TIMEOUT);
- if (retval < 0)
- goto reset_old_alts;
+ if (retval < 0) {
+ usb_hcd_alloc_bandwidth(dev, NULL, NULL, NULL);
+ usb_enable_lpm(dev);
+ mutex_unlock(hcd->bandwidth_mutex);
+ return retval;
+ }
mutex_unlock(hcd->bandwidth_mutex);
/* re-init hc/hcd interface/endpoint state */
diff --git a/drivers/usb/core/sysfs.c b/drivers/usb/core/sysfs.c
index a2ca38e25e0c..8d134193fa0c 100644
--- a/drivers/usb/core/sysfs.c
+++ b/drivers/usb/core/sysfs.c
@@ -889,7 +889,11 @@ read_descriptors(struct file *filp, struct kobject *kobj,
size_t srclen, n;
int cfgno;
void *src;
+ int retval;
+ retval = usb_lock_device_interruptible(udev);
+ if (retval < 0)
+ return -EINTR;
/* The binary attribute begins with the device descriptor.
* Following that are the raw descriptor entries for all the
* configurations (config plus subsidiary descriptors).
@@ -914,6 +918,7 @@ read_descriptors(struct file *filp, struct kobject *kobj,
off -= srclen;
}
}
+ usb_unlock_device(udev);
return count - nleft;
}
diff --git a/drivers/usb/dwc3/dwc3-meson-g12a.c b/drivers/usb/dwc3/dwc3-meson-g12a.c
index 88b75b5a039c..1f7f4d88ed9d 100644
--- a/drivers/usb/dwc3/dwc3-meson-g12a.c
+++ b/drivers/usb/dwc3/dwc3-meson-g12a.c
@@ -737,13 +737,13 @@ static int dwc3_meson_g12a_probe(struct platform_device *pdev)
goto err_disable_clks;
}
- ret = reset_control_deassert(priv->reset);
+ ret = reset_control_reset(priv->reset);
if (ret)
- goto err_assert_reset;
+ goto err_disable_clks;
ret = dwc3_meson_g12a_get_phys(priv);
if (ret)
- goto err_assert_reset;
+ goto err_disable_clks;
ret = priv->drvdata->setup_regmaps(priv, base);
if (ret)
@@ -752,7 +752,7 @@ static int dwc3_meson_g12a_probe(struct platform_device *pdev)
if (priv->vbus) {
ret = regulator_enable(priv->vbus);
if (ret)
- goto err_assert_reset;
+ goto err_disable_clks;
}
/* Get dr_mode */
@@ -765,13 +765,13 @@ static int dwc3_meson_g12a_probe(struct platform_device *pdev)
ret = priv->drvdata->usb_init(priv);
if (ret)
- goto err_assert_reset;
+ goto err_disable_clks;
/* Init PHYs */
for (i = 0 ; i < PHY_COUNT ; ++i) {
ret = phy_init(priv->phys[i]);
if (ret)
- goto err_assert_reset;
+ goto err_disable_clks;
}
/* Set PHY Power */
@@ -809,9 +809,6 @@ err_phys_exit:
for (i = 0 ; i < PHY_COUNT ; ++i)
phy_exit(priv->phys[i]);
-err_assert_reset:
- reset_control_assert(priv->reset);
-
err_disable_clks:
clk_bulk_disable_unprepare(priv->drvdata->num_clks,
priv->drvdata->clks);
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 871cdccf3a5f..9823bb424abd 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -713,6 +713,7 @@ static const struct usb_device_id id_table_combined[] = {
{ USB_DEVICE(XSENS_VID, XSENS_AWINDA_STATION_PID) },
{ USB_DEVICE(XSENS_VID, XSENS_CONVERTER_PID) },
{ USB_DEVICE(XSENS_VID, XSENS_MTDEVBOARD_PID) },
+ { USB_DEVICE(XSENS_VID, XSENS_MTIUSBCONVERTER_PID) },
{ USB_DEVICE(XSENS_VID, XSENS_MTW_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_OMNI1509) },
{ USB_DEVICE(MOBILITY_VID, MOBILITY_USB_SERIAL_PID) },
diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h
index e8373528264c..b5ca17a5967a 100644
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -160,6 +160,7 @@
#define XSENS_AWINDA_DONGLE_PID 0x0102
#define XSENS_MTW_PID 0x0200 /* Xsens MTw */
#define XSENS_MTDEVBOARD_PID 0x0300 /* Motion Tracker Development Board */
+#define XSENS_MTIUSBCONVERTER_PID 0x0301 /* MTi USB converter */
#define XSENS_CONVERTER_PID 0xD00D /* Xsens USB-serial converter */
/* Xsens devices using FTDI VID */
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 89b3192af326..0c6f160a214a 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -1094,14 +1094,18 @@ static const struct usb_device_id option_ids[] = {
{ USB_DEVICE(QUALCOMM_VENDOR_ID, UBLOX_PRODUCT_R410M),
.driver_info = RSVD(1) | RSVD(3) },
/* Quectel products using Quectel vendor ID */
- { USB_DEVICE(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EC21),
- .driver_info = RSVD(4) },
- { USB_DEVICE(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EC25),
- .driver_info = RSVD(4) },
- { USB_DEVICE(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EG95),
- .driver_info = RSVD(4) },
- { USB_DEVICE(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_BG96),
- .driver_info = RSVD(4) },
+ { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EC21, 0xff, 0xff, 0xff),
+ .driver_info = NUMEP2 },
+ { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EC21, 0xff, 0, 0) },
+ { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EC25, 0xff, 0xff, 0xff),
+ .driver_info = NUMEP2 },
+ { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EC25, 0xff, 0, 0) },
+ { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EG95, 0xff, 0xff, 0xff),
+ .driver_info = NUMEP2 },
+ { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EG95, 0xff, 0, 0) },
+ { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_BG96, 0xff, 0xff, 0xff),
+ .driver_info = NUMEP2 },
+ { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_BG96, 0xff, 0, 0) },
{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EP06, 0xff, 0xff, 0xff),
.driver_info = RSVD(1) | RSVD(2) | RSVD(3) | RSVD(4) | NUMEP2 },
{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EP06, 0xff, 0, 0) },
@@ -1819,6 +1823,8 @@ static const struct usb_device_id option_ids[] = {
{ USB_DEVICE_INTERFACE_CLASS(0x1e0e, 0x9003, 0xff) }, /* Simcom SIM7500/SIM7600 MBIM mode */
{ USB_DEVICE_INTERFACE_CLASS(0x1e0e, 0x9011, 0xff), /* Simcom SIM7500/SIM7600 RNDIS mode */
.driver_info = RSVD(7) },
+ { USB_DEVICE_INTERFACE_CLASS(0x1e0e, 0x9205, 0xff) }, /* Simcom SIM7070/SIM7080/SIM7090 AT+ECM mode */
+ { USB_DEVICE_INTERFACE_CLASS(0x1e0e, 0x9206, 0xff) }, /* Simcom SIM7070/SIM7080/SIM7090 AT-only mode */
{ USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_X060S_X200),
.driver_info = NCTRL(0) | NCTRL(1) | RSVD(4) },
{ USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_X220_X500D),
diff --git a/drivers/usb/typec/mux/intel_pmc_mux.c b/drivers/usb/typec/mux/intel_pmc_mux.c
index e4021e13af40..ec7da0fa3cf8 100644
--- a/drivers/usb/typec/mux/intel_pmc_mux.c
+++ b/drivers/usb/typec/mux/intel_pmc_mux.c
@@ -61,14 +61,11 @@ enum {
#define PMC_USB_ALTMODE_ORI_SHIFT 1
#define PMC_USB_ALTMODE_UFP_SHIFT 3
-#define PMC_USB_ALTMODE_ORI_AUX_SHIFT 4
-#define PMC_USB_ALTMODE_ORI_HSL_SHIFT 5
/* DP specific Mode Data bits */
#define PMC_USB_ALTMODE_DP_MODE_SHIFT 8
/* TBT specific Mode Data bits */
-#define PMC_USB_ALTMODE_HPD_HIGH BIT(14)
#define PMC_USB_ALTMODE_TBT_TYPE BIT(17)
#define PMC_USB_ALTMODE_CABLE_TYPE BIT(18)
#define PMC_USB_ALTMODE_ACTIVE_LINK BIT(20)
@@ -179,15 +176,9 @@ pmc_usb_mux_dp(struct pmc_usb_port *port, struct typec_mux_state *state)
req.mode_data = (port->orientation - 1) << PMC_USB_ALTMODE_ORI_SHIFT;
req.mode_data |= (port->role - 1) << PMC_USB_ALTMODE_UFP_SHIFT;
- req.mode_data |= sbu_orientation(port) << PMC_USB_ALTMODE_ORI_AUX_SHIFT;
- req.mode_data |= hsl_orientation(port) << PMC_USB_ALTMODE_ORI_HSL_SHIFT;
-
req.mode_data |= (state->mode - TYPEC_STATE_MODAL) <<
PMC_USB_ALTMODE_DP_MODE_SHIFT;
- if (data->status & DP_STATUS_HPD_STATE)
- req.mode_data |= PMC_USB_ALTMODE_HPD_HIGH;
-
ret = pmc_usb_command(port, (void *)&req, sizeof(req));
if (ret)
return ret;
@@ -212,9 +203,6 @@ pmc_usb_mux_tbt(struct pmc_usb_port *port, struct typec_mux_state *state)
req.mode_data = (port->orientation - 1) << PMC_USB_ALTMODE_ORI_SHIFT;
req.mode_data |= (port->role - 1) << PMC_USB_ALTMODE_UFP_SHIFT;
- req.mode_data |= sbu_orientation(port) << PMC_USB_ALTMODE_ORI_AUX_SHIFT;
- req.mode_data |= hsl_orientation(port) << PMC_USB_ALTMODE_ORI_HSL_SHIFT;
-
if (TBT_ADAPTER(data->device_mode) == TBT_ADAPTER_TBT3)
req.mode_data |= PMC_USB_ALTMODE_TBT_TYPE;
@@ -497,6 +485,7 @@ err_remove_ports:
for (i = 0; i < pmc->num_ports; i++) {
typec_switch_unregister(pmc->port[i].typec_sw);
typec_mux_unregister(pmc->port[i].typec_mux);
+ usb_role_switch_unregister(pmc->port[i].usb_sw);
}
return ret;
@@ -510,6 +499,7 @@ static int pmc_usb_remove(struct platform_device *pdev)
for (i = 0; i < pmc->num_ports; i++) {
typec_switch_unregister(pmc->port[i].typec_sw);
typec_mux_unregister(pmc->port[i].typec_mux);
+ usb_role_switch_unregister(pmc->port[i].usb_sw);
}
return 0;
diff --git a/drivers/usb/typec/ucsi/ucsi_acpi.c b/drivers/usb/typec/ucsi/ucsi_acpi.c
index 9fc4f338e870..c0aca2f0f23f 100644
--- a/drivers/usb/typec/ucsi/ucsi_acpi.c
+++ b/drivers/usb/typec/ucsi/ucsi_acpi.c
@@ -112,11 +112,15 @@ static void ucsi_acpi_notify(acpi_handle handle, u32 event, void *data)
static int ucsi_acpi_probe(struct platform_device *pdev)
{
+ struct acpi_device *adev = ACPI_COMPANION(&pdev->dev);
struct ucsi_acpi *ua;
struct resource *res;
acpi_status status;
int ret;
+ if (adev->dep_unmet)
+ return -EPROBE_DEFER;
+
ua = devm_kzalloc(&pdev->dev, sizeof(*ua), GFP_KERNEL);
if (!ua)
return -ENOMEM;
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-27 23:08:07 +0300