summaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
Diffstat (limited to 'drivers')
-rw-r--r--drivers/infiniband/hw/ipath/ipath_eeprom.c426
-rw-r--r--drivers/infiniband/hw/ipath/ipath_kernel.h7
-rw-r--r--drivers/infiniband/hw/ipath/ipath_sysfs.c73
3 files changed, 439 insertions, 67 deletions
diff --git a/drivers/infiniband/hw/ipath/ipath_eeprom.c b/drivers/infiniband/hw/ipath/ipath_eeprom.c
index e28a42f53769..72f90e8d5f76 100644
--- a/drivers/infiniband/hw/ipath/ipath_eeprom.c
+++ b/drivers/infiniband/hw/ipath/ipath_eeprom.c
@@ -62,6 +62,33 @@
* accessing eeprom contents from within the kernel, only via sysfs.
*/
+/* Added functionality for IBA7220-based cards */
+#define IPATH_EEPROM_DEV_V1 0xA0
+#define IPATH_EEPROM_DEV_V2 0xA2
+#define IPATH_TEMP_DEV 0x98
+#define IPATH_BAD_DEV (IPATH_EEPROM_DEV_V2+2)
+#define IPATH_NO_DEV (0xFF)
+
+/*
+ * The number of I2C chains is proliferating. Table below brings
+ * some order to the madness. The basic principle is that the
+ * table is scanned from the top, and a "probe" is made to the
+ * device probe_dev. If that succeeds, the chain is considered
+ * to be of that type, and dd->i2c_chain_type is set to the index+1
+ * of the entry.
+ * The +1 is so static initialization can mean "unknown, do probe."
+ */
+static struct i2c_chain_desc {
+ u8 probe_dev; /* If seen at probe, chain is this type */
+ u8 eeprom_dev; /* Dev addr (if any) for EEPROM */
+ u8 temp_dev; /* Dev Addr (if any) for Temp-sense */
+} i2c_chains[] = {
+ { IPATH_BAD_DEV, IPATH_NO_DEV, IPATH_NO_DEV }, /* pre-iba7220 bds */
+ { IPATH_EEPROM_DEV_V1, IPATH_EEPROM_DEV_V1, IPATH_TEMP_DEV}, /* V1 */
+ { IPATH_EEPROM_DEV_V2, IPATH_EEPROM_DEV_V2, IPATH_TEMP_DEV}, /* V2 */
+ { IPATH_NO_DEV }
+};
+
enum i2c_type {
i2c_line_scl = 0,
i2c_line_sda
@@ -75,13 +102,6 @@ enum i2c_state {
#define READ_CMD 1
#define WRITE_CMD 0
-static int eeprom_init;
-
-/*
- * The gpioval manipulation really should be protected by spinlocks
- * or be converted to use atomic operations.
- */
-
/**
* i2c_gpio_set - set a GPIO line
* @dd: the infinipath device
@@ -241,6 +261,27 @@ static int i2c_ackrcv(struct ipath_devdata *dd)
}
/**
+ * rd_byte - read a byte, leaving ACK, STOP, etc up to caller
+ * @dd: the infinipath device
+ *
+ * Returns byte shifted out of device
+ */
+static int rd_byte(struct ipath_devdata *dd)
+{
+ int bit_cntr, data;
+
+ data = 0;
+
+ for (bit_cntr = 7; bit_cntr >= 0; --bit_cntr) {
+ data <<= 1;
+ scl_out(dd, i2c_line_high);
+ data |= sda_in(dd, 0);
+ scl_out(dd, i2c_line_low);
+ }
+ return data;
+}
+
+/**
* wr_byte - write a byte, one bit at a time
* @dd: the infinipath device
* @data: the byte to write
@@ -331,7 +372,6 @@ static int eeprom_reset(struct ipath_devdata *dd)
ipath_cdbg(VERBOSE, "Resetting i2c eeprom; initial gpioout reg "
"is %llx\n", (unsigned long long) *gpioval);
- eeprom_init = 1;
/*
* This is to get the i2c into a known state, by first going low,
* then tristate sda (and then tristate scl as first thing
@@ -340,12 +380,17 @@ static int eeprom_reset(struct ipath_devdata *dd)
scl_out(dd, i2c_line_low);
sda_out(dd, i2c_line_high);
+ /* Clock up to 9 cycles looking for SDA hi, then issue START and STOP */
while (clock_cycles_left--) {
scl_out(dd, i2c_line_high);
+ /* SDA seen high, issue START by dropping it while SCL high */
if (sda_in(dd, 0)) {
sda_out(dd, i2c_line_low);
scl_out(dd, i2c_line_low);
+ /* ATMEL spec says must be followed by STOP. */
+ scl_out(dd, i2c_line_high);
+ sda_out(dd, i2c_line_high);
ret = 0;
goto bail;
}
@@ -359,29 +404,121 @@ bail:
return ret;
}
-/**
- * ipath_eeprom_read - receives bytes from the eeprom via I2C
- * @dd: the infinipath device
- * @eeprom_offset: address to read from
- * @buffer: where to store result
- * @len: number of bytes to receive
+/*
+ * Probe for I2C device at specified address. Returns 0 for "success"
+ * to match rest of this file.
+ * Leave bus in "reasonable" state for further commands.
*/
+static int i2c_probe(struct ipath_devdata *dd, int devaddr)
+{
+ int ret = 0;
+
+ ret = eeprom_reset(dd);
+ if (ret) {
+ ipath_dev_err(dd, "Failed reset probing device 0x%02X\n",
+ devaddr);
+ return ret;
+ }
+ /*
+ * Reset no longer leaves bus in start condition, so normal
+ * i2c_startcmd() will do.
+ */
+ ret = i2c_startcmd(dd, devaddr | READ_CMD);
+ if (ret)
+ ipath_cdbg(VERBOSE, "Failed startcmd for device 0x%02X\n",
+ devaddr);
+ else {
+ /*
+ * Device did respond. Complete a single-byte read, because some
+ * devices apparently cannot handle STOP immediately after they
+ * ACK the start-cmd.
+ */
+ int data;
+ data = rd_byte(dd);
+ stop_cmd(dd);
+ ipath_cdbg(VERBOSE, "Response from device 0x%02X\n", devaddr);
+ }
+ return ret;
+}
+
+/*
+ * Returns the "i2c type". This is a pointer to a struct that describes
+ * the I2C chain on this board. To minimize impact on struct ipath_devdata,
+ * the (small integer) index into the table is actually memoized, rather
+ * then the pointer.
+ * Memoization is because the type is determined on the first call per chip.
+ * An alternative would be to move type determination to early
+ * init code.
+ */
+static struct i2c_chain_desc *ipath_i2c_type(struct ipath_devdata *dd)
+{
+ int idx;
+
+ /* Get memoized index, from previous successful probes */
+ idx = dd->ipath_i2c_chain_type - 1;
+ if (idx >= 0 && idx < (ARRAY_SIZE(i2c_chains) - 1))
+ goto done;
+
+ idx = 0;
+ while (i2c_chains[idx].probe_dev != IPATH_NO_DEV) {
+ /* if probe succeeds, this is type */
+ if (!i2c_probe(dd, i2c_chains[idx].probe_dev))
+ break;
+ ++idx;
+ }
+
+ /*
+ * Old EEPROM (first entry) may require a reset after probe,
+ * rather than being able to "start" after "stop"
+ */
+ if (idx == 0)
+ eeprom_reset(dd);
+
+ if (i2c_chains[idx].probe_dev == IPATH_NO_DEV)
+ idx = -1;
+ else
+ dd->ipath_i2c_chain_type = idx + 1;
+done:
+ return (idx >= 0) ? i2c_chains + idx : NULL;
+}
static int ipath_eeprom_internal_read(struct ipath_devdata *dd,
u8 eeprom_offset, void *buffer, int len)
{
- /* compiler complains unless initialized */
- u8 single_byte = 0;
- int bit_cntr;
int ret;
+ struct i2c_chain_desc *icd;
+ u8 *bp = buffer;
- if (!eeprom_init)
- eeprom_reset(dd);
-
- eeprom_offset = (eeprom_offset << 1) | READ_CMD;
+ ret = 1;
+ icd = ipath_i2c_type(dd);
+ if (!icd)
+ goto bail;
- if (i2c_startcmd(dd, eeprom_offset)) {
- ipath_dbg("Failed startcmd\n");
+ if (icd->eeprom_dev == IPATH_NO_DEV) {
+ /* legacy not-really-I2C */
+ ipath_cdbg(VERBOSE, "Start command only address\n");
+ eeprom_offset = (eeprom_offset << 1) | READ_CMD;
+ ret = i2c_startcmd(dd, eeprom_offset);
+ } else {
+ /* Actual I2C */
+ ipath_cdbg(VERBOSE, "Start command uses devaddr\n");
+ if (i2c_startcmd(dd, icd->eeprom_dev | WRITE_CMD)) {
+ ipath_dbg("Failed EEPROM startcmd\n");
+ stop_cmd(dd);
+ ret = 1;
+ goto bail;
+ }
+ ret = wr_byte(dd, eeprom_offset);
+ stop_cmd(dd);
+ if (ret) {
+ ipath_dev_err(dd, "Failed to write EEPROM address\n");
+ ret = 1;
+ goto bail;
+ }
+ ret = i2c_startcmd(dd, icd->eeprom_dev | READ_CMD);
+ }
+ if (ret) {
+ ipath_dbg("Failed startcmd for dev %02X\n", icd->eeprom_dev);
stop_cmd(dd);
ret = 1;
goto bail;
@@ -392,22 +529,11 @@ static int ipath_eeprom_internal_read(struct ipath_devdata *dd,
* incrementing the address.
*/
while (len-- > 0) {
- /* get data */
- single_byte = 0;
- for (bit_cntr = 8; bit_cntr; bit_cntr--) {
- u8 bit;
- scl_out(dd, i2c_line_high);
- bit = sda_in(dd, 0);
- single_byte |= bit << (bit_cntr - 1);
- scl_out(dd, i2c_line_low);
- }
-
+ /* get and store data */
+ *bp++ = rd_byte(dd);
/* send ack if not the last byte */
if (len)
send_ack(dd);
-
- *((u8 *) buffer) = single_byte;
- buffer++;
}
stop_cmd(dd);
@@ -418,31 +544,40 @@ bail:
return ret;
}
-
-/**
- * ipath_eeprom_write - writes data to the eeprom via I2C
- * @dd: the infinipath device
- * @eeprom_offset: where to place data
- * @buffer: data to write
- * @len: number of bytes to write
- */
static int ipath_eeprom_internal_write(struct ipath_devdata *dd, u8 eeprom_offset,
const void *buffer, int len)
{
- u8 single_byte;
int sub_len;
const u8 *bp = buffer;
int max_wait_time, i;
int ret;
+ struct i2c_chain_desc *icd;
- if (!eeprom_init)
- eeprom_reset(dd);
+ ret = 1;
+ icd = ipath_i2c_type(dd);
+ if (!icd)
+ goto bail;
while (len > 0) {
- if (i2c_startcmd(dd, (eeprom_offset << 1) | WRITE_CMD)) {
- ipath_dbg("Failed to start cmd offset %u\n",
- eeprom_offset);
- goto failed_write;
+ if (icd->eeprom_dev == IPATH_NO_DEV) {
+ if (i2c_startcmd(dd,
+ (eeprom_offset << 1) | WRITE_CMD)) {
+ ipath_dbg("Failed to start cmd offset %u\n",
+ eeprom_offset);
+ goto failed_write;
+ }
+ } else {
+ /* Real I2C */
+ if (i2c_startcmd(dd, icd->eeprom_dev | WRITE_CMD)) {
+ ipath_dbg("Failed EEPROM startcmd\n");
+ goto failed_write;
+ }
+ ret = wr_byte(dd, eeprom_offset);
+ if (ret) {
+ ipath_dev_err(dd, "Failed to write EEPROM "
+ "address\n");
+ goto failed_write;
+ }
}
sub_len = min(len, 4);
@@ -468,9 +603,11 @@ static int ipath_eeprom_internal_write(struct ipath_devdata *dd, u8 eeprom_offse
* the writes have completed. We do this inline to avoid
* the debug prints that are in the real read routine
* if the startcmd fails.
+ * We also use the proper device address, so it doesn't matter
+ * whether we have real eeprom_dev. legacy likes any address.
*/
max_wait_time = 100;
- while (i2c_startcmd(dd, READ_CMD)) {
+ while (i2c_startcmd(dd, icd->eeprom_dev | READ_CMD)) {
stop_cmd(dd);
if (!--max_wait_time) {
ipath_dbg("Did not get successful read to "
@@ -478,15 +615,8 @@ static int ipath_eeprom_internal_write(struct ipath_devdata *dd, u8 eeprom_offse
goto failed_write;
}
}
- /* now read the zero byte */
- for (i = single_byte = 0; i < 8; i++) {
- u8 bit;
- scl_out(dd, i2c_line_high);
- bit = sda_in(dd, 0);
- scl_out(dd, i2c_line_low);
- single_byte <<= 1;
- single_byte |= bit;
- }
+ /* now read (and ignore) the resulting byte */
+ rd_byte(dd);
stop_cmd(dd);
}
@@ -501,9 +631,12 @@ bail:
return ret;
}
-/*
- * The public entry-points ipath_eeprom_read() and ipath_eeprom_write()
- * are now just wrappers around the internal functions.
+/**
+ * ipath_eeprom_read - receives bytes from the eeprom via I2C
+ * @dd: the infinipath device
+ * @eeprom_offset: address to read from
+ * @buffer: where to store result
+ * @len: number of bytes to receive
*/
int ipath_eeprom_read(struct ipath_devdata *dd, u8 eeprom_offset,
void *buff, int len)
@@ -519,6 +652,13 @@ int ipath_eeprom_read(struct ipath_devdata *dd, u8 eeprom_offset,
return ret;
}
+/**
+ * ipath_eeprom_write - writes data to the eeprom via I2C
+ * @dd: the infinipath device
+ * @eeprom_offset: where to place data
+ * @buffer: data to write
+ * @len: number of bytes to write
+ */
int ipath_eeprom_write(struct ipath_devdata *dd, u8 eeprom_offset,
const void *buff, int len)
{
@@ -820,7 +960,7 @@ int ipath_update_eeprom_log(struct ipath_devdata *dd)
* if we log an hour at 31 minutes, then we would need to set
* active_time to -29 to accurately count the _next_ hour.
*/
- if (new_time > 3600) {
+ if (new_time >= 3600) {
new_hrs = new_time / 3600;
atomic_sub((new_hrs * 3600), &dd->ipath_active_time);
new_hrs += dd->ipath_eep_hrs;
@@ -885,3 +1025,159 @@ void ipath_inc_eeprom_err(struct ipath_devdata *dd, u32 eidx, u32 incr)
spin_unlock_irqrestore(&dd->ipath_eep_st_lock, flags);
return;
}
+
+static int ipath_tempsense_internal_read(struct ipath_devdata *dd, u8 regnum)
+{
+ int ret;
+ struct i2c_chain_desc *icd;
+
+ ret = -ENOENT;
+
+ icd = ipath_i2c_type(dd);
+ if (!icd)
+ goto bail;
+
+ if (icd->temp_dev == IPATH_NO_DEV) {
+ /* tempsense only exists on new, real-I2C boards */
+ ret = -ENXIO;
+ goto bail;
+ }
+
+ if (i2c_startcmd(dd, icd->temp_dev | WRITE_CMD)) {
+ ipath_dbg("Failed tempsense startcmd\n");
+ stop_cmd(dd);
+ ret = -ENXIO;
+ goto bail;
+ }
+ ret = wr_byte(dd, regnum);
+ stop_cmd(dd);
+ if (ret) {
+ ipath_dev_err(dd, "Failed tempsense WR command %02X\n",
+ regnum);
+ ret = -ENXIO;
+ goto bail;
+ }
+ if (i2c_startcmd(dd, icd->temp_dev | READ_CMD)) {
+ ipath_dbg("Failed tempsense RD startcmd\n");
+ stop_cmd(dd);
+ ret = -ENXIO;
+ goto bail;
+ }
+ /*
+ * We can only clock out one byte per command, sensibly
+ */
+ ret = rd_byte(dd);
+ stop_cmd(dd);
+
+bail:
+ return ret;
+}
+
+#define VALID_TS_RD_REG_MASK 0xBF
+
+/**
+ * ipath_tempsense_read - read register of temp sensor via I2C
+ * @dd: the infinipath device
+ * @regnum: register to read from
+ *
+ * returns reg contents (0..255) or < 0 for error
+ */
+int ipath_tempsense_read(struct ipath_devdata *dd, u8 regnum)
+{
+ int ret;
+
+ if (regnum > 7)
+ return -EINVAL;
+
+ /* return a bogus value for (the one) register we do not have */
+ if (!((1 << regnum) & VALID_TS_RD_REG_MASK))
+ return 0;
+
+ ret = mutex_lock_interruptible(&dd->ipath_eep_lock);
+ if (!ret) {
+ ret = ipath_tempsense_internal_read(dd, regnum);
+ mutex_unlock(&dd->ipath_eep_lock);
+ }
+
+ /*
+ * There are three possibilities here:
+ * ret is actual value (0..255)
+ * ret is -ENXIO or -EINVAL from code in this file
+ * ret is -EINTR from mutex_lock_interruptible.
+ */
+ return ret;
+}
+
+static int ipath_tempsense_internal_write(struct ipath_devdata *dd,
+ u8 regnum, u8 data)
+{
+ int ret = -ENOENT;
+ struct i2c_chain_desc *icd;
+
+ icd = ipath_i2c_type(dd);
+ if (!icd)
+ goto bail;
+
+ if (icd->temp_dev == IPATH_NO_DEV) {
+ /* tempsense only exists on new, real-I2C boards */
+ ret = -ENXIO;
+ goto bail;
+ }
+ if (i2c_startcmd(dd, icd->temp_dev | WRITE_CMD)) {
+ ipath_dbg("Failed tempsense startcmd\n");
+ stop_cmd(dd);
+ ret = -ENXIO;
+ goto bail;
+ }
+ ret = wr_byte(dd, regnum);
+ if (ret) {
+ stop_cmd(dd);
+ ipath_dev_err(dd, "Failed to write tempsense command %02X\n",
+ regnum);
+ ret = -ENXIO;
+ goto bail;
+ }
+ ret = wr_byte(dd, data);
+ stop_cmd(dd);
+ ret = i2c_startcmd(dd, icd->temp_dev | READ_CMD);
+ if (ret) {
+ ipath_dev_err(dd, "Failed tempsense data wrt to %02X\n",
+ regnum);
+ ret = -ENXIO;
+ }
+
+bail:
+ return ret;
+}
+
+#define VALID_TS_WR_REG_MASK ((1 << 9) | (1 << 0xB) | (1 << 0xD))
+
+/**
+ * ipath_tempsense_write - write register of temp sensor via I2C
+ * @dd: the infinipath device
+ * @regnum: register to write
+ * @data: data to write
+ *
+ * returns 0 for success or < 0 for error
+ */
+int ipath_tempsense_write(struct ipath_devdata *dd, u8 regnum, u8 data)
+{
+ int ret;
+
+ if (regnum > 15 || !((1 << regnum) & VALID_TS_WR_REG_MASK))
+ return -EINVAL;
+
+ ret = mutex_lock_interruptible(&dd->ipath_eep_lock);
+ if (!ret) {
+ ret = ipath_tempsense_internal_write(dd, regnum, data);
+ mutex_unlock(&dd->ipath_eep_lock);
+ }
+
+ /*
+ * There are three possibilities here:
+ * ret is 0 for success
+ * ret is -ENXIO or -EINVAL from code in this file
+ * ret is -EINTR from mutex_lock_interruptible.
+ */
+ return ret;
+}
diff --git a/drivers/infiniband/hw/ipath/ipath_kernel.h b/drivers/infiniband/hw/ipath/ipath_kernel.h
index 3a15af26b093..398de7f7e2e4 100644
--- a/drivers/infiniband/hw/ipath/ipath_kernel.h
+++ b/drivers/infiniband/hw/ipath/ipath_kernel.h
@@ -654,8 +654,9 @@ struct ipath_devdata {
* Register bits for selecting i2c direction and values, used for
* I2C serial flash.
*/
- u16 ipath_gpio_sda_num;
- u16 ipath_gpio_scl_num;
+ u8 ipath_gpio_sda_num;
+ u8 ipath_gpio_scl_num;
+ u8 ipath_i2c_chain_type;
u64 ipath_gpio_sda;
u64 ipath_gpio_scl;
@@ -906,6 +907,8 @@ void ipath_release_user_pages(struct page **, size_t);
void ipath_release_user_pages_on_close(struct page **, size_t);
int ipath_eeprom_read(struct ipath_devdata *, u8, void *, int);
int ipath_eeprom_write(struct ipath_devdata *, u8, const void *, int);
+int ipath_tempsense_read(struct ipath_devdata *, u8 regnum);
+int ipath_tempsense_write(struct ipath_devdata *, u8 regnum, u8 data);
/* these are used for the registers that vary with port */
void ipath_write_kreg_port(const struct ipath_devdata *, ipath_kreg,
diff --git a/drivers/infiniband/hw/ipath/ipath_sysfs.c b/drivers/infiniband/hw/ipath/ipath_sysfs.c
index bb41c3f6aad3..7961d26404f1 100644
--- a/drivers/infiniband/hw/ipath/ipath_sysfs.c
+++ b/drivers/infiniband/hw/ipath/ipath_sysfs.c
@@ -943,6 +943,7 @@ invalid:
bail:
return ret;
}
+
/*
* Get/Set RX lane-reversal enable. 0=no, 1=yes.
*/
@@ -997,6 +998,75 @@ static struct attribute_group driver_attr_group = {
.attrs = driver_attributes
};
+static ssize_t store_tempsense(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf,
+ size_t count)
+{
+ struct ipath_devdata *dd = dev_get_drvdata(dev);
+ int ret, stat;
+ u16 val;
+
+ ret = ipath_parse_ushort(buf, &val);
+ if (ret <= 0) {
+ ipath_dev_err(dd, "attempt to set invalid tempsense config\n");
+ goto bail;
+ }
+ /* If anything but the highest limit, enable T_CRIT_A "interrupt" */
+ stat = ipath_tempsense_write(dd, 9, (val == 0x7f7f) ? 0x80 : 0);
+ if (stat) {
+ ipath_dev_err(dd, "Unable to set tempsense config\n");
+ ret = -1;
+ goto bail;
+ }
+ stat = ipath_tempsense_write(dd, 0xB, (u8) (val & 0xFF));
+ if (stat) {
+ ipath_dev_err(dd, "Unable to set local Tcrit\n");
+ ret = -1;
+ goto bail;
+ }
+ stat = ipath_tempsense_write(dd, 0xD, (u8) (val >> 8));
+ if (stat) {
+ ipath_dev_err(dd, "Unable to set remote Tcrit\n");
+ ret = -1;
+ goto bail;
+ }
+
+bail:
+ return ret;
+}
+
+/*
+ * dump tempsense regs. in decimal, to ease shell-scripts.
+ */
+static ssize_t show_tempsense(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct ipath_devdata *dd = dev_get_drvdata(dev);
+ int ret;
+ int idx;
+ u8 regvals[8];
+
+ ret = -ENXIO;
+ for (idx = 0; idx < 8; ++idx) {
+ if (idx == 6)
+ continue;
+ ret = ipath_tempsense_read(dd, idx);
+ if (ret < 0)
+ break;
+ regvals[idx] = ret;
+ }
+ if (idx == 8)
+ ret = scnprintf(buf, PAGE_SIZE, "%d %d %02X %02X %d %d\n",
+ *(signed char *)(regvals),
+ *(signed char *)(regvals + 1),
+ regvals[2], regvals[3],
+ *(signed char *)(regvals + 5),
+ *(signed char *)(regvals + 7));
+ return ret;
+}
+
struct attribute_group *ipath_driver_attr_groups[] = {
&driver_attr_group,
NULL,
@@ -1025,6 +1095,8 @@ static DEVICE_ATTR(jint_max_packets, S_IWUSR | S_IRUGO,
show_jint_max_packets, store_jint_max_packets);
static DEVICE_ATTR(jint_idle_ticks, S_IWUSR | S_IRUGO,
show_jint_idle_ticks, store_jint_idle_ticks);
+static DEVICE_ATTR(tempsense, S_IWUSR | S_IRUGO,
+ show_tempsense, store_tempsense);
static struct attribute *dev_attributes[] = {
&dev_attr_guid.attr,
@@ -1044,6 +1116,7 @@ static struct attribute *dev_attributes[] = {
&dev_attr_rx_pol_inv.attr,
&dev_attr_led_override.attr,
&dev_attr_logged_errors.attr,
+ &dev_attr_tempsense.attr,
&dev_attr_localbus_info.attr,
NULL
};
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-25 14:32:23 +0300