summaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
Diffstat (limited to 'drivers')
-rw-r--r--drivers/clk/meson/gxbb.h18
-rw-r--r--drivers/net/ethernet/stmicro/stmmac/Kconfig6
-rw-r--r--drivers/net/ethernet/stmicro/stmmac/Makefile2
-rw-r--r--drivers/net/ethernet/stmicro/stmmac/dwmac-meson.c4
-rw-r--r--drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c324
-rw-r--r--drivers/net/ethernet/stmicro/stmmac/stmmac_platform.h8
-rw-r--r--drivers/usb/dwc2/platform.c34
7 files changed, 381 insertions, 15 deletions
diff --git a/drivers/clk/meson/gxbb.h b/drivers/clk/meson/gxbb.h
index ae461b16af75..0252939ba58f 100644
--- a/drivers/clk/meson/gxbb.h
+++ b/drivers/clk/meson/gxbb.h
@@ -183,14 +183,14 @@
/* CLKID_CLK81 */
#define CLKID_MPLL0 13
#define CLKID_MPLL1 14
-#define CLKID_MPLL2 15
+/* CLKID_MPLL2 */
#define CLKID_DDR 16
#define CLKID_DOS 17
#define CLKID_ISA 18
#define CLKID_PL301 19
#define CLKID_PERIPHS 20
#define CLKID_SPICC 21
-#define CLKID_I2C 22
+/* CLKID_I2C */
#define CLKID_SAR_ADC 23
#define CLKID_SMART_CARD 24
#define CLKID_RNG0 25
@@ -202,7 +202,7 @@
#define CLKID_ABUF 31
#define CLKID_HIU_IFACE 32
#define CLKID_ASSIST_MISC 33
-#define CLKID_SPI 34
+/* CLKID_SPI */
#define CLKID_I2S_SPDIF 35
#define CLKID_ETH 36
#define CLKID_DEMUX 37
@@ -218,12 +218,12 @@
#define CLKID_AIU 47
#define CLKID_UART1 48
#define CLKID_G2D 49
-#define CLKID_USB0 50
-#define CLKID_USB1 51
+/* CLKID_USB0 */
+/* CLKID_USB1 */
#define CLKID_RESET 52
#define CLKID_NAND 53
#define CLKID_DOS_PARSER 54
-#define CLKID_USB 55
+/* CLKID_USB */
#define CLKID_VDIN1 56
#define CLKID_AHB_ARB0 57
#define CLKID_EFUSE 58
@@ -232,8 +232,8 @@
#define CLKID_AHB_CTRL_BUS 61
#define CLKID_HDMI_INTR_SYNC 62
#define CLKID_HDMI_PCLK 63
-#define CLKID_USB1_DDR_BRIDGE 64
-#define CLKID_USB0_DDR_BRIDGE 65
+/* CLKID_USB1_DDR_BRIDGE */
+/* CLKID_USB0_DDR_BRIDGE */
#define CLKID_MMC_PCLK 66
#define CLKID_DVIN 67
#define CLKID_UART2 68
@@ -261,7 +261,7 @@
#define CLKID_AO_AHB_SRAM 90
#define CLKID_AO_AHB_BUS 91
#define CLKID_AO_IFACE 92
-#define CLKID_AO_I2C 93
+/* CLKID_AO_I2C */
/* CLKID_SD_EMMC_A */
/* CLKID_SD_EMMC_B */
/* CLKID_SD_EMMC_C */
diff --git a/drivers/net/ethernet/stmicro/stmmac/Kconfig b/drivers/net/ethernet/stmicro/stmmac/Kconfig
index c732b8ce2528..3818c5e06eba 100644
--- a/drivers/net/ethernet/stmicro/stmmac/Kconfig
+++ b/drivers/net/ethernet/stmicro/stmmac/Kconfig
@@ -61,13 +61,13 @@ config DWMAC_LPC18XX
config DWMAC_MESON
tristate "Amlogic Meson dwmac support"
default ARCH_MESON
- depends on OF && (ARCH_MESON || COMPILE_TEST)
+ depends on OF && COMMON_CLK && (ARCH_MESON || COMPILE_TEST)
help
Support for Ethernet controller on Amlogic Meson SoCs.
This selects the Amlogic Meson SoC glue layer support for
- the stmmac device driver. This driver is used for Meson6 and
- Meson8 SoCs.
+ the stmmac device driver. This driver is used for Meson6,
+ Meson8, Meson8b and GXBB SoCs.
config DWMAC_ROCKCHIP
tristate "Rockchip dwmac support"
diff --git a/drivers/net/ethernet/stmicro/stmmac/Makefile b/drivers/net/ethernet/stmicro/stmmac/Makefile
index f0c9396fa28e..5d6ece5919b3 100644
--- a/drivers/net/ethernet/stmicro/stmmac/Makefile
+++ b/drivers/net/ethernet/stmicro/stmmac/Makefile
@@ -9,7 +9,7 @@ stmmac-objs:= stmmac_main.o stmmac_ethtool.o stmmac_mdio.o ring_mode.o \
obj-$(CONFIG_STMMAC_PLATFORM) += stmmac-platform.o
obj-$(CONFIG_DWMAC_IPQ806X) += dwmac-ipq806x.o
obj-$(CONFIG_DWMAC_LPC18XX) += dwmac-lpc18xx.o
-obj-$(CONFIG_DWMAC_MESON) += dwmac-meson.o
+obj-$(CONFIG_DWMAC_MESON) += dwmac-meson.o dwmac-meson8b.o
obj-$(CONFIG_DWMAC_ROCKCHIP) += dwmac-rk.o
obj-$(CONFIG_DWMAC_SOCFPGA) += dwmac-altr-socfpga.o
obj-$(CONFIG_DWMAC_STI) += dwmac-sti.o
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-meson.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-meson.c
index c1bac1912b37..309d99536a2c 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-meson.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-meson.c
@@ -1,5 +1,5 @@
/*
- * Amlogic Meson DWMAC glue layer
+ * Amlogic Meson6 and Meson8 DWMAC glue layer
*
* Copyright (C) 2014 Beniamino Galvani <b.galvani@gmail.com>
*
@@ -96,5 +96,5 @@ static struct platform_driver meson6_dwmac_driver = {
module_platform_driver(meson6_dwmac_driver);
MODULE_AUTHOR("Beniamino Galvani <b.galvani@gmail.com>");
-MODULE_DESCRIPTION("Amlogic Meson DWMAC glue layer");
+MODULE_DESCRIPTION("Amlogic Meson6 and Meson8 DWMAC glue layer");
MODULE_LICENSE("GPL v2");
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c
new file mode 100644
index 000000000000..250e4ceafc8d
--- /dev/null
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c
@@ -0,0 +1,324 @@
+/*
+ * Amlogic Meson8b and GXBB DWMAC glue layer
+ *
+ * Copyright (C) 2016 Martin Blumenstingl <martin.blumenstingl@googlemail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/device.h>
+#include <linux/ethtool.h>
+#include <linux/io.h>
+#include <linux/ioport.h>
+#include <linux/module.h>
+#include <linux/of_net.h>
+#include <linux/mfd/syscon.h>
+#include <linux/platform_device.h>
+#include <linux/stmmac.h>
+
+#include "stmmac_platform.h"
+
+#define PRG_ETH0 0x0
+
+#define PRG_ETH0_RGMII_MODE BIT(0)
+
+/* mux to choose between fclk_div2 (bit unset) and mpll2 (bit set) */
+#define PRG_ETH0_CLK_M250_SEL_SHIFT 4
+#define PRG_ETH0_CLK_M250_SEL_MASK GENMASK(4, 4)
+
+#define PRG_ETH0_TXDLY_SHIFT 5
+#define PRG_ETH0_TXDLY_MASK GENMASK(6, 5)
+#define PRG_ETH0_TXDLY_OFF (0x0 << PRG_ETH0_TXDLY_SHIFT)
+#define PRG_ETH0_TXDLY_QUARTER (0x1 << PRG_ETH0_TXDLY_SHIFT)
+#define PRG_ETH0_TXDLY_HALF (0x2 << PRG_ETH0_TXDLY_SHIFT)
+#define PRG_ETH0_TXDLY_THREE_QUARTERS (0x3 << PRG_ETH0_TXDLY_SHIFT)
+
+/* divider for the result of m250_sel */
+#define PRG_ETH0_CLK_M250_DIV_SHIFT 7
+#define PRG_ETH0_CLK_M250_DIV_WIDTH 3
+
+/* divides the result of m25_sel by either 5 (bit unset) or 10 (bit set) */
+#define PRG_ETH0_CLK_M25_DIV_SHIFT 10
+#define PRG_ETH0_CLK_M25_DIV_WIDTH 1
+
+#define PRG_ETH0_INVERTED_RMII_CLK BIT(11)
+#define PRG_ETH0_TX_AND_PHY_REF_CLK BIT(12)
+
+#define MUX_CLK_NUM_PARENTS 2
+
+struct meson8b_dwmac {
+ struct platform_device *pdev;
+
+ void __iomem *regs;
+
+ phy_interface_t phy_mode;
+
+ struct clk_mux m250_mux;
+ struct clk *m250_mux_clk;
+ struct clk *m250_mux_parent[MUX_CLK_NUM_PARENTS];
+
+ struct clk_divider m250_div;
+ struct clk *m250_div_clk;
+
+ struct clk_divider m25_div;
+ struct clk *m25_div_clk;
+};
+
+static void meson8b_dwmac_mask_bits(struct meson8b_dwmac *dwmac, u32 reg,
+ u32 mask, u32 value)
+{
+ u32 data;
+
+ data = readl(dwmac->regs + reg);
+ data &= ~mask;
+ data |= (value & mask);
+
+ writel(data, dwmac->regs + reg);
+}
+
+static int meson8b_init_clk(struct meson8b_dwmac *dwmac)
+{
+ struct clk_init_data init;
+ int i, ret;
+ struct device *dev = &dwmac->pdev->dev;
+ char clk_name[32];
+ const char *clk_div_parents[1];
+ const char *mux_parent_names[MUX_CLK_NUM_PARENTS];
+ static struct clk_div_table clk_25m_div_table[] = {
+ { .val = 0, .div = 5 },
+ { .val = 1, .div = 10 },
+ { /* sentinel */ },
+ };
+
+ /* get the mux parents from DT */
+ for (i = 0; i < MUX_CLK_NUM_PARENTS; i++) {
+ char name[16];
+
+ snprintf(name, sizeof(name), "clkin%d", i);
+ dwmac->m250_mux_parent[i] = devm_clk_get(dev, name);
+ if (IS_ERR(dwmac->m250_mux_parent[i])) {
+ ret = PTR_ERR(dwmac->m250_mux_parent[i]);
+ if (ret != -EPROBE_DEFER)
+ dev_err(dev, "Missing clock %s\n", name);
+ return ret;
+ }
+
+ mux_parent_names[i] =
+ __clk_get_name(dwmac->m250_mux_parent[i]);
+ }
+
+ /* create the m250_mux */
+ snprintf(clk_name, sizeof(clk_name), "%s#m250_sel", dev_name(dev));
+ init.name = clk_name;
+ init.ops = &clk_mux_ops;
+ init.flags = 0;
+ init.parent_names = mux_parent_names;
+ init.num_parents = MUX_CLK_NUM_PARENTS;
+
+ dwmac->m250_mux.reg = dwmac->regs + PRG_ETH0;
+ dwmac->m250_mux.shift = PRG_ETH0_CLK_M250_SEL_SHIFT;
+ dwmac->m250_mux.mask = PRG_ETH0_CLK_M250_SEL_MASK;
+ dwmac->m250_mux.flags = 0;
+ dwmac->m250_mux.table = NULL;
+ dwmac->m250_mux.hw.init = &init;
+
+ dwmac->m250_mux_clk = devm_clk_register(dev, &dwmac->m250_mux.hw);
+ if (WARN_ON(IS_ERR(dwmac->m250_mux_clk)))
+ return PTR_ERR(dwmac->m250_mux_clk);
+
+ /* create the m250_div */
+ snprintf(clk_name, sizeof(clk_name), "%s#m250_div", dev_name(dev));
+ init.name = devm_kstrdup(dev, clk_name, GFP_KERNEL);
+ init.ops = &clk_divider_ops;
+ init.flags = CLK_SET_RATE_PARENT;
+ clk_div_parents[0] = __clk_get_name(dwmac->m250_mux_clk);
+ init.parent_names = clk_div_parents;
+ init.num_parents = ARRAY_SIZE(clk_div_parents);
+
+ dwmac->m250_div.reg = dwmac->regs + PRG_ETH0;
+ dwmac->m250_div.shift = PRG_ETH0_CLK_M250_DIV_SHIFT;
+ dwmac->m250_div.width = PRG_ETH0_CLK_M250_DIV_WIDTH;
+ dwmac->m250_div.hw.init = &init;
+ dwmac->m250_div.flags = CLK_DIVIDER_ONE_BASED | CLK_DIVIDER_ALLOW_ZERO;
+
+ dwmac->m250_div_clk = devm_clk_register(dev, &dwmac->m250_div.hw);
+ if (WARN_ON(IS_ERR(dwmac->m250_div_clk)))
+ return PTR_ERR(dwmac->m250_div_clk);
+
+ /* create the m25_div */
+ snprintf(clk_name, sizeof(clk_name), "%s#m25_div", dev_name(dev));
+ init.name = devm_kstrdup(dev, clk_name, GFP_KERNEL);
+ init.ops = &clk_divider_ops;
+ init.flags = CLK_IS_BASIC | CLK_SET_RATE_PARENT;
+ clk_div_parents[0] = __clk_get_name(dwmac->m250_div_clk);
+ init.parent_names = clk_div_parents;
+ init.num_parents = ARRAY_SIZE(clk_div_parents);
+
+ dwmac->m25_div.reg = dwmac->regs + PRG_ETH0;
+ dwmac->m25_div.shift = PRG_ETH0_CLK_M25_DIV_SHIFT;
+ dwmac->m25_div.width = PRG_ETH0_CLK_M25_DIV_WIDTH;
+ dwmac->m25_div.table = clk_25m_div_table;
+ dwmac->m25_div.hw.init = &init;
+ dwmac->m25_div.flags = CLK_DIVIDER_ALLOW_ZERO;
+
+ dwmac->m25_div_clk = devm_clk_register(dev, &dwmac->m25_div.hw);
+ if (WARN_ON(IS_ERR(dwmac->m25_div_clk)))
+ return PTR_ERR(dwmac->m25_div_clk);
+
+ return 0;
+}
+
+static int meson8b_init_prg_eth(struct meson8b_dwmac *dwmac)
+{
+ int ret;
+ unsigned long clk_rate;
+
+ switch (dwmac->phy_mode) {
+ case PHY_INTERFACE_MODE_RGMII:
+ case PHY_INTERFACE_MODE_RGMII_ID:
+ case PHY_INTERFACE_MODE_RGMII_RXID:
+ case PHY_INTERFACE_MODE_RGMII_TXID:
+ /* Generate a 25MHz clock for the PHY */
+ clk_rate = 25 * 1000 * 1000;
+
+ /* enable RGMII mode */
+ meson8b_dwmac_mask_bits(dwmac, PRG_ETH0, PRG_ETH0_RGMII_MODE,
+ PRG_ETH0_RGMII_MODE);
+
+ /* only relevant for RMII mode -> disable in RGMII mode */
+ meson8b_dwmac_mask_bits(dwmac, PRG_ETH0,
+ PRG_ETH0_INVERTED_RMII_CLK, 0);
+
+ /* TX clock delay - all known boards use a 1/4 cycle delay */
+ meson8b_dwmac_mask_bits(dwmac, PRG_ETH0, PRG_ETH0_TXDLY_MASK,
+ PRG_ETH0_TXDLY_QUARTER);
+ break;
+
+ case PHY_INTERFACE_MODE_RMII:
+ /* Use the rate of the mux clock for the internal RMII PHY */
+ clk_rate = clk_get_rate(dwmac->m250_mux_clk);
+
+ /* disable RGMII mode -> enables RMII mode */
+ meson8b_dwmac_mask_bits(dwmac, PRG_ETH0, PRG_ETH0_RGMII_MODE,
+ 0);
+
+ /* invert internal clk_rmii_i to generate 25/2.5 tx_rx_clk */
+ meson8b_dwmac_mask_bits(dwmac, PRG_ETH0,
+ PRG_ETH0_INVERTED_RMII_CLK,
+ PRG_ETH0_INVERTED_RMII_CLK);
+
+ /* TX clock delay cannot be configured in RMII mode */
+ meson8b_dwmac_mask_bits(dwmac, PRG_ETH0, PRG_ETH0_TXDLY_MASK,
+ 0);
+
+ break;
+
+ default:
+ dev_err(&dwmac->pdev->dev, "unsupported phy-mode %s\n",
+ phy_modes(dwmac->phy_mode));
+ return -EINVAL;
+ }
+
+ ret = clk_prepare_enable(dwmac->m25_div_clk);
+ if (ret) {
+ dev_err(&dwmac->pdev->dev, "failed to enable the PHY clock\n");
+ return ret;
+ }
+
+ ret = clk_set_rate(dwmac->m25_div_clk, clk_rate);
+ if (ret) {
+ clk_disable_unprepare(dwmac->m25_div_clk);
+
+ dev_err(&dwmac->pdev->dev, "failed to set PHY clock\n");
+ return ret;
+ }
+
+ /* enable TX_CLK and PHY_REF_CLK generator */
+ meson8b_dwmac_mask_bits(dwmac, PRG_ETH0, PRG_ETH0_TX_AND_PHY_REF_CLK,
+ PRG_ETH0_TX_AND_PHY_REF_CLK);
+
+ return 0;
+}
+
+static int meson8b_dwmac_probe(struct platform_device *pdev)
+{
+ struct plat_stmmacenet_data *plat_dat;
+ struct stmmac_resources stmmac_res;
+ struct resource *res;
+ struct meson8b_dwmac *dwmac;
+ int ret;
+
+ ret = stmmac_get_platform_resources(pdev, &stmmac_res);
+ if (ret)
+ return ret;
+
+ plat_dat = stmmac_probe_config_dt(pdev, &stmmac_res.mac);
+ if (IS_ERR(plat_dat))
+ return PTR_ERR(plat_dat);
+
+ dwmac = devm_kzalloc(&pdev->dev, sizeof(*dwmac), GFP_KERNEL);
+ if (!dwmac)
+ return -ENOMEM;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+ dwmac->regs = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(dwmac->regs))
+ return PTR_ERR(dwmac->regs);
+
+ dwmac->pdev = pdev;
+ dwmac->phy_mode = of_get_phy_mode(pdev->dev.of_node);
+ if (dwmac->phy_mode < 0) {
+ dev_err(&pdev->dev, "missing phy-mode property\n");
+ return -EINVAL;
+ }
+
+ ret = meson8b_init_clk(dwmac);
+ if (ret)
+ return ret;
+
+ ret = meson8b_init_prg_eth(dwmac);
+ if (ret)
+ return ret;
+
+ plat_dat->bsp_priv = dwmac;
+
+ return stmmac_dvr_probe(&pdev->dev, plat_dat, &stmmac_res);
+}
+
+static int meson8b_dwmac_remove(struct platform_device *pdev)
+{
+ struct meson8b_dwmac *dwmac = get_stmmac_bsp_priv(&pdev->dev);
+
+ clk_disable_unprepare(dwmac->m25_div_clk);
+
+ return stmmac_pltfr_remove(pdev);
+}
+
+static const struct of_device_id meson8b_dwmac_match[] = {
+ { .compatible = "amlogic,meson8b-dwmac" },
+ { .compatible = "amlogic,meson-gxbb-dwmac" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, meson8b_dwmac_match);
+
+static struct platform_driver meson8b_dwmac_driver = {
+ .probe = meson8b_dwmac_probe,
+ .remove = meson8b_dwmac_remove,
+ .driver = {
+ .name = "meson8b-dwmac",
+ .pm = &stmmac_pltfr_pm_ops,
+ .of_match_table = meson8b_dwmac_match,
+ },
+};
+module_platform_driver(meson8b_dwmac_driver);
+
+MODULE_AUTHOR("Martin Blumenstingl <martin.blumenstingl@googlemail.com>");
+MODULE_DESCRIPTION("Amlogic Meson8b and GXBB DWMAC glue layer");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.h b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.h
index ffeb8d9e2b2e..64e147f53a9c 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.h
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.h
@@ -30,4 +30,12 @@ int stmmac_get_platform_resources(struct platform_device *pdev,
int stmmac_pltfr_remove(struct platform_device *pdev);
extern const struct dev_pm_ops stmmac_pltfr_pm_ops;
+static inline void *get_stmmac_bsp_priv(struct device *dev)
+{
+ struct net_device *ndev = dev_get_drvdata(dev);
+ struct stmmac_priv *priv = netdev_priv(ndev);
+
+ return priv->plat->bsp_priv;
+}
+
#endif /* __STMMAC_PLATFORM_H__ */
diff --git a/drivers/usb/dwc2/platform.c b/drivers/usb/dwc2/platform.c
index 530959a8a6d1..8e1728b39a49 100644
--- a/drivers/usb/dwc2/platform.c
+++ b/drivers/usb/dwc2/platform.c
@@ -182,6 +182,38 @@ static const struct dwc2_core_params params_ltq = {
.hibernation = -1,
};
+static const struct dwc2_core_params params_amlogic = {
+ .otg_cap = DWC2_CAP_PARAM_NO_HNP_SRP_CAPABLE,
+ .otg_ver = -1,
+ .dma_enable = 1,
+ .dma_desc_enable = 0,
+ .dma_desc_fs_enable = 0,
+ .speed = DWC2_SPEED_PARAM_HIGH,
+ .enable_dynamic_fifo = 1,
+ .en_multiple_tx_fifo = -1,
+ .host_rx_fifo_size = 512,
+ .host_nperio_tx_fifo_size = 500,
+ .host_perio_tx_fifo_size = 500,
+ .max_transfer_size = -1,
+ .max_packet_count = -1,
+ .host_channels = 16,
+ .phy_type = DWC2_PHY_TYPE_PARAM_UTMI,
+ .phy_utmi_width = -1,
+ .phy_ulpi_ddr = -1,
+ .phy_ulpi_ext_vbus = -1,
+ .i2c_enable = -1,
+ .ulpi_fs_ls = -1,
+ .host_support_fs_ls_low_power = -1,
+ .host_ls_low_power_phy_clk = -1,
+ .ts_dline = -1,
+ .reload_ctl = 1,
+ .ahbcfg = GAHBCFG_HBSTLEN_INCR8 <<
+ GAHBCFG_HBSTLEN_SHIFT,
+ .uframe_sched = 0,
+ .external_id_pin_ctl = -1,
+ .hibernation = -1,
+};
+
/*
* Check the dr_mode against the module configuration and hardware
* capabilities.
@@ -486,6 +518,8 @@ static const struct of_device_id dwc2_of_match_table[] = {
{ .compatible = "lantiq,xrx200-usb", .data = &params_ltq },
{ .compatible = "snps,dwc2", .data = NULL },
{ .compatible = "samsung,s3c6400-hsotg", .data = NULL},
+ { .compatible = "amlogic,meson8b-usb", .data = &params_amlogic },
+ { .compatible = "amlogic,meson-gxbb-usb", .data = &params_amlogic },
{},
};
MODULE_DEVICE_TABLE(of, dwc2_of_match_table);
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-01 05:36:11 +0300