diff options
Diffstat (limited to 'drivers')
452 files changed, 49656 insertions, 5870 deletions
diff --git a/drivers/Kconfig b/drivers/Kconfig index d19b6f5a1106..d38f43f593d4 100644 --- a/drivers/Kconfig +++ b/drivers/Kconfig @@ -78,6 +78,8 @@ source "drivers/hid/Kconfig" source "drivers/usb/Kconfig" +source "drivers/uwb/Kconfig" + source "drivers/mmc/Kconfig" source "drivers/memstick/Kconfig" diff --git a/drivers/Makefile b/drivers/Makefile index a0a2e3b675d6..2503f7b99b2f 100644 --- a/drivers/Makefile +++ b/drivers/Makefile @@ -101,3 +101,4 @@ obj-$(CONFIG_SSB) += ssb/ obj-$(CONFIG_VIRTIO) += virtio/ obj-$(CONFIG_REGULATOR) += regulator/ obj-$(CONFIG_STAGING) += staging/ +obj-$(CONFIG_UWB) += uwb/ diff --git a/drivers/acpi/pci_slot.c b/drivers/acpi/pci_slot.c index 9bb84d4596be..cd1f4467be7b 100644 --- a/drivers/acpi/pci_slot.c +++ b/drivers/acpi/pci_slot.c @@ -150,7 +150,7 @@ register_slot(acpi_handle handle, u32 lvl, void *context, void **rv) } snprintf(name, sizeof(name), "%u", (u32)sun); - pci_slot = pci_create_slot(pci_bus, device, name); + pci_slot = pci_create_slot(pci_bus, device, name, NULL); if (IS_ERR(pci_slot)) { err("pci_create_slot returned %ld\n", PTR_ERR(pci_slot)); kfree(slot); diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 1ee9499bd343..bbb3cae57492 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -5373,6 +5373,8 @@ struct ata_port *ata_port_alloc(struct ata_host *host) #ifdef CONFIG_ATA_SFF INIT_DELAYED_WORK(&ap->port_task, ata_pio_task); +#else + INIT_DELAYED_WORK(&ap->port_task, NULL); #endif INIT_DELAYED_WORK(&ap->hotplug_task, ata_scsi_hotplug); INIT_WORK(&ap->scsi_rescan_task, ata_scsi_dev_rescan); diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c index a93247cc395a..5d687d7cffae 100644 --- a/drivers/ata/libata-eh.c +++ b/drivers/ata/libata-eh.c @@ -1206,7 +1206,10 @@ void ata_eh_about_to_do(struct ata_link *link, struct ata_device *dev, ata_eh_clear_action(link, dev, ehi, action); - if (!(ehc->i.flags & ATA_EHI_QUIET)) + /* About to take EH action, set RECOVERED. Ignore actions on + * slave links as master will do them again. + */ + if (!(ehc->i.flags & ATA_EHI_QUIET) && link != ap->slave_link) ap->pflags |= ATA_PFLAG_RECOVERED; spin_unlock_irqrestore(ap->lock, flags); @@ -2010,8 +2013,13 @@ void ata_eh_autopsy(struct ata_port *ap) struct ata_eh_context *mehc = &ap->link.eh_context; struct ata_eh_context *sehc = &ap->slave_link->eh_context; + /* transfer control flags from master to slave */ + sehc->i.flags |= mehc->i.flags & ATA_EHI_TO_SLAVE_MASK; + + /* perform autopsy on the slave link */ ata_eh_link_autopsy(ap->slave_link); + /* transfer actions from slave to master and clear slave */ ata_eh_about_to_do(ap->slave_link, NULL, ATA_EH_ALL_ACTIONS); mehc->i.action |= sehc->i.action; mehc->i.dev_action[1] |= sehc->i.dev_action[1]; @@ -2447,14 +2455,14 @@ int ata_eh_reset(struct ata_link *link, int classify, dev->pio_mode = XFER_PIO_0; dev->flags &= ~ATA_DFLAG_SLEEPING; - if (ata_phys_link_offline(ata_dev_phys_link(dev))) - continue; - - /* apply class override */ - if (lflags & ATA_LFLAG_ASSUME_ATA) - classes[dev->devno] = ATA_DEV_ATA; - else if (lflags & ATA_LFLAG_ASSUME_SEMB) - classes[dev->devno] = ATA_DEV_SEMB_UNSUP; /* not yet */ + if (!ata_phys_link_offline(ata_dev_phys_link(dev))) { + /* apply class override */ + if (lflags & ATA_LFLAG_ASSUME_ATA) + classes[dev->devno] = ATA_DEV_ATA; + else if (lflags & ATA_LFLAG_ASSUME_SEMB) + classes[dev->devno] = ATA_DEV_SEMB_UNSUP; + } else + classes[dev->devno] = ATA_DEV_NONE; } /* record current link speed */ diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c index 2a4c516894f0..4b4739486327 100644 --- a/drivers/ata/libata-sff.c +++ b/drivers/ata/libata-sff.c @@ -2153,8 +2153,17 @@ void ata_sff_error_handler(struct ata_port *ap) */ void ata_sff_post_internal_cmd(struct ata_queued_cmd *qc) { - if (qc->ap->ioaddr.bmdma_addr) + struct ata_port *ap = qc->ap; + unsigned long flags; + + spin_lock_irqsave(ap->lock, flags); + + ap->hsm_task_state = HSM_ST_IDLE; + + if (ap->ioaddr.bmdma_addr) ata_bmdma_stop(qc); + + spin_unlock_irqrestore(ap->lock, flags); } /** diff --git a/drivers/ata/sata_via.c b/drivers/ata/sata_via.c index 1cfa74535d91..5b72e734300a 100644 --- a/drivers/ata/sata_via.c +++ b/drivers/ata/sata_via.c @@ -70,6 +70,7 @@ enum { static int svia_init_one(struct pci_dev *pdev, const struct pci_device_id *ent); static int svia_scr_read(struct ata_link *link, unsigned int sc_reg, u32 *val); static int svia_scr_write(struct ata_link *link, unsigned int sc_reg, u32 val); +static void svia_tf_load(struct ata_port *ap, const struct ata_taskfile *tf); static void svia_noop_freeze(struct ata_port *ap); static int vt6420_prereset(struct ata_link *link, unsigned long deadline); static int vt6421_pata_cable_detect(struct ata_port *ap); @@ -103,21 +104,26 @@ static struct scsi_host_template svia_sht = { ATA_BMDMA_SHT(DRV_NAME), }; -static struct ata_port_operations vt6420_sata_ops = { +static struct ata_port_operations svia_base_ops = { .inherits = &ata_bmdma_port_ops, + .sff_tf_load = svia_tf_load, +}; + +static struct ata_port_operations vt6420_sata_ops = { + .inherits = &svia_base_ops, .freeze = svia_noop_freeze, .prereset = vt6420_prereset, }; static struct ata_port_operations vt6421_pata_ops = { - .inherits = &ata_bmdma_port_ops, + .inherits = &svia_base_ops, .cable_detect = vt6421_pata_cable_detect, .set_piomode = vt6421_set_pio_mode, .set_dmamode = vt6421_set_dma_mode, }; static struct ata_port_operations vt6421_sata_ops = { - .inherits = &ata_bmdma_port_ops, + .inherits = &svia_base_ops, .scr_read = svia_scr_read, .scr_write = svia_scr_write, }; @@ -168,6 +174,29 @@ static int svia_scr_write(struct ata_link *link, unsigned int sc_reg, u32 val) return 0; } +/** + * svia_tf_load - send taskfile registers to host controller + * @ap: Port to which output is sent + * @tf: ATA taskfile register set + * + * Outputs ATA taskfile to standard ATA host controller. + * + * This is to fix the internal bug of via chipsets, which will + * reset the device register after changing the IEN bit on ctl + * register. + */ +static void svia_tf_load(struct ata_port *ap, const struct ata_taskfile *tf) +{ + struct ata_taskfile ttf; + + if (tf->ctl != ap->last_ctl) { + ttf = *tf; + ttf.flags |= ATA_TFLAG_DEVICE; + tf = &ttf; + } + ata_sff_tf_load(ap, tf); +} + static void svia_noop_freeze(struct ata_port *ap) { /* Some VIA controllers choke if ATA_NIEN is manipulated in diff --git a/drivers/char/hvc_console.c b/drivers/char/hvc_console.c index bf70450a49cc..5b819b12675a 100644 --- a/drivers/char/hvc_console.c +++ b/drivers/char/hvc_console.c @@ -161,7 +161,7 @@ static void hvc_console_print(struct console *co, const char *b, } } else { r = cons_ops[index]->put_chars(vtermnos[index], c, i); - if (r < 0) { + if (r <= 0) { /* throw away chars on error */ i = 0; } else if (r > 0) { @@ -374,6 +374,9 @@ static void hvc_close(struct tty_struct *tty, struct file * filp) if (hp->ops->notifier_del) hp->ops->notifier_del(hp, hp->data); + /* cancel pending tty resize work */ + cancel_work_sync(&hp->tty_resize); + /* * Chain calls chars_in_buffer() and returns immediately if * there is no buffered data otherwise sleeps on a wait queue @@ -399,6 +402,9 @@ static void hvc_hangup(struct tty_struct *tty) if (!hp) return; + /* cancel pending tty resize work */ + cancel_work_sync(&hp->tty_resize); + spin_lock_irqsave(&hp->lock, flags); /* @@ -418,8 +424,8 @@ static void hvc_hangup(struct tty_struct *tty) spin_unlock_irqrestore(&hp->lock, flags); - if (hp->ops->notifier_del) - hp->ops->notifier_del(hp, hp->data); + if (hp->ops->notifier_hangup) + hp->ops->notifier_hangup(hp, hp->data); while(temp_open_count) { --temp_open_count; @@ -431,7 +437,7 @@ static void hvc_hangup(struct tty_struct *tty) * Push buffered characters whether they were just recently buffered or waiting * on a blocked hypervisor. Call this function with hp->lock held. */ -static void hvc_push(struct hvc_struct *hp) +static int hvc_push(struct hvc_struct *hp) { int n; @@ -439,7 +445,7 @@ static void hvc_push(struct hvc_struct *hp) if (n <= 0) { if (n == 0) { hp->do_wakeup = 1; - return; + return 0; } /* throw away output on error; this happens when there is no session connected to the vterm. */ @@ -450,6 +456,8 @@ static void hvc_push(struct hvc_struct *hp) memmove(hp->outbuf, hp->outbuf + n, hp->n_outbuf); else hp->do_wakeup = 1; + + return n; } static int hvc_write(struct tty_struct *tty, const unsigned char *buf, int count) @@ -492,6 +500,39 @@ static int hvc_write(struct tty_struct *tty, const unsigned char *buf, int count return written; } +/** + * hvc_set_winsz() - Resize the hvc tty terminal window. + * @work: work structure. + * + * The routine shall not be called within an atomic context because it + * might sleep. + * + * Locking: hp->lock + */ +static void hvc_set_winsz(struct work_struct *work) +{ + struct hvc_struct *hp; + unsigned long hvc_flags; + struct tty_struct *tty; + struct winsize ws; + + hp = container_of(work, struct hvc_struct, tty_resize); + if (!hp) + return; + + spin_lock_irqsave(&hp->lock, hvc_flags); + if (!hp->tty) { + spin_unlock_irqrestore(&hp->lock, hvc_flags); + return; + } + ws = hp->ws; + tty = tty_kref_get(hp->tty); + spin_unlock_irqrestore(&hp->lock, hvc_flags); + + tty_do_resize(tty, tty, &ws); + tty_kref_put(tty); +} + /* * This is actually a contract between the driver and the tty layer outlining * how much write room the driver can guarantee will be sent OR BUFFERED. This @@ -538,16 +579,20 @@ int hvc_poll(struct hvc_struct *hp) char buf[N_INBUF] __ALIGNED__; unsigned long flags; int read_total = 0; + int written_total = 0; spin_lock_irqsave(&hp->lock, flags); /* Push pending writes */ if (hp->n_outbuf > 0) - hvc_push(hp); + written_total = hvc_push(hp); /* Reschedule us if still some write pending */ - if (hp->n_outbuf > 0) + if (hp->n_outbuf > 0) { poll_mask |= HVC_POLL_WRITE; + /* If hvc_push() was not able to write, sleep a few msecs */ + timeout = (written_total) ? 0 : MIN_TIMEOUT; + } /* No tty attached, just skip */ tty = hp->tty; @@ -632,6 +677,24 @@ int hvc_poll(struct hvc_struct *hp) } EXPORT_SYMBOL_GPL(hvc_poll); +/** + * hvc_resize() - Update terminal window size information. + * @hp: HVC console pointer + * @ws: Terminal window size structure + * + * Stores the specified window size information in the hvc structure of @hp. + * The function schedule the tty resize update. + * + * Locking: Locking free; the function MUST be called holding hp->lock + */ +void hvc_resize(struct hvc_struct *hp, struct winsize ws) +{ + if ((hp->ws.ws_row != ws.ws_row) || (hp->ws.ws_col != ws.ws_col)) { + hp->ws = ws; + schedule_work(&hp->tty_resize); + } +} + /* * This kthread is either polling or interrupt driven. This is determined by * calling hvc_poll() who determines whether a console adapter support @@ -659,10 +722,6 @@ static int khvcd(void *unused) poll_mask |= HVC_POLL_READ; if (hvc_kicked) continue; - if (poll_mask & HVC_POLL_WRITE) { - yield(); - continue; - } set_current_state(TASK_INTERRUPTIBLE); if (!hvc_kicked) { if (poll_mask == 0) @@ -718,6 +777,7 @@ struct hvc_struct __devinit *hvc_alloc(uint32_t vtermno, int data, kref_init(&hp->kref); + INIT_WORK(&hp->tty_resize, hvc_set_winsz); spin_lock_init(&hp->lock); spin_lock(&hvc_structs_lock); @@ -743,7 +803,7 @@ struct hvc_struct __devinit *hvc_alloc(uint32_t vtermno, int data, } EXPORT_SYMBOL_GPL(hvc_alloc); -int __devexit hvc_remove(struct hvc_struct *hp) +int hvc_remove(struct hvc_struct *hp) { unsigned long flags; struct tty_struct *tty; @@ -796,7 +856,7 @@ static int hvc_init(void) drv->minor_start = HVC_MINOR; drv->type = TTY_DRIVER_TYPE_SYSTEM; drv->init_termios = tty_std_termios; - drv->flags = TTY_DRIVER_REAL_RAW; + drv->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_RESET_TERMIOS; tty_set_operations(drv, &hvc_ops); /* Always start the kthread because there can be hotplug vty adapters diff --git a/drivers/char/hvc_console.h b/drivers/char/hvc_console.h index 9790201718ae..8297dbc2e6ec 100644 --- a/drivers/char/hvc_console.h +++ b/drivers/char/hvc_console.h @@ -27,6 +27,7 @@ #ifndef HVC_CONSOLE_H #define HVC_CONSOLE_H #include <linux/kref.h> +#include <linux/tty.h> /* * This is the max number of console adapters that can/will be found as @@ -56,6 +57,8 @@ struct hvc_struct { struct hv_ops *ops; int irq_requested; int data; + struct winsize ws; + struct work_struct tty_resize; struct list_head next; struct kref kref; /* ref count & hvc_struct lifetime */ }; @@ -65,9 +68,10 @@ struct hv_ops { int (*get_chars)(uint32_t vtermno, char *buf, int count); int (*put_chars)(uint32_t vtermno, const char *buf, int count); - /* Callbacks for notification. Called in open and close */ + /* Callbacks for notification. Called in open, close and hangup */ int (*notifier_add)(struct hvc_struct *hp, int irq); void (*notifier_del)(struct hvc_struct *hp, int irq); + void (*notifier_hangup)(struct hvc_struct *hp, int irq); }; /* Register a vterm and a slot index for use as a console (console_init) */ @@ -77,15 +81,19 @@ extern int hvc_instantiate(uint32_t vtermno, int index, struct hv_ops *ops); extern struct hvc_struct * __devinit hvc_alloc(uint32_t vtermno, int data, struct hv_ops *ops, int outbuf_size); /* remove a vterm from hvc tty operation (module_exit or hotplug remove) */ -extern int __devexit hvc_remove(struct hvc_struct *hp); +extern int hvc_remove(struct hvc_struct *hp); /* data available */ int hvc_poll(struct hvc_struct *hp); void hvc_kick(void); +/* Resize hvc tty terminal window */ +extern void hvc_resize(struct hvc_struct *hp, struct winsize ws); + /* default notifier for irq based notification */ extern int notifier_add_irq(struct hvc_struct *hp, int data); extern void notifier_del_irq(struct hvc_struct *hp, int data); +extern void notifier_hangup_irq(struct hvc_struct *hp, int data); #if defined(CONFIG_XMON) && defined(CONFIG_SMP) diff --git a/drivers/char/hvc_irq.c b/drivers/char/hvc_irq.c index 73a59cdb8947..d09e5688d449 100644 --- a/drivers/char/hvc_irq.c +++ b/drivers/char/hvc_irq.c @@ -42,3 +42,8 @@ void notifier_del_irq(struct hvc_struct *hp, int irq) free_irq(irq, hp); hp->irq_requested = 0; } + +void notifier_hangup_irq(struct hvc_struct *hp, int irq) +{ + notifier_del_irq(hp, irq); +} diff --git a/drivers/char/hvc_iseries.c b/drivers/char/hvc_iseries.c index b71c610fe5ae..b74a2f8ab908 100644 --- a/drivers/char/hvc_iseries.c +++ b/drivers/char/hvc_iseries.c @@ -202,6 +202,7 @@ static struct hv_ops hvc_get_put_ops = { .put_chars = put_chars, .notifier_add = notifier_add_irq, .notifier_del = notifier_del_irq, + .notifier_hangup = notifier_hangup_irq, }; static int __devinit hvc_vio_probe(struct vio_dev *vdev, diff --git a/drivers/char/hvc_vio.c b/drivers/char/hvc_vio.c index 93f3840c1682..019e0b58593d 100644 --- a/drivers/char/hvc_vio.c +++ b/drivers/char/hvc_vio.c @@ -82,6 +82,7 @@ static struct hv_ops hvc_get_put_ops = { .put_chars = hvc_put_chars, .notifier_add = notifier_add_irq, .notifier_del = notifier_del_irq, + .notifier_hangup = notifier_hangup_irq, }; static int __devinit hvc_vio_probe(struct vio_dev *vdev, diff --git a/drivers/char/hvc_xen.c b/drivers/char/hvc_xen.c index 538ceea5e7df..eba999f8598d 100644 --- a/drivers/char/hvc_xen.c +++ b/drivers/char/hvc_xen.c @@ -102,6 +102,7 @@ static struct hv_ops hvc_ops = { .put_chars = write_console, .notifier_add = notifier_add_irq, .notifier_del = notifier_del_irq, + .notifier_hangup = notifier_hangup_irq, }; static int __init xen_init(void) diff --git a/drivers/char/tty_port.c b/drivers/char/tty_port.c index 553b0e9d8d17..c8f8024cb40e 100644 --- a/drivers/char/tty_port.c +++ b/drivers/char/tty_port.c @@ -90,7 +90,7 @@ void tty_port_tty_set(struct tty_port *port, struct tty_struct *tty) spin_lock_irqsave(&port->lock, flags); if (port->tty) tty_kref_put(port->tty); - port->tty = tty; + port->tty = tty_kref_get(tty); spin_unlock_irqrestore(&port->lock, flags); } EXPORT_SYMBOL(tty_port_tty_set); diff --git a/drivers/char/virtio_console.c b/drivers/char/virtio_console.c index d0f4eb6fdb7f..3fb0d2c88ba5 100644 --- a/drivers/char/virtio_console.c +++ b/drivers/char/virtio_console.c @@ -198,6 +198,7 @@ static int __devinit virtcons_probe(struct virtio_device *dev) virtio_cons.put_chars = put_chars; virtio_cons.notifier_add = notifier_add_vio; virtio_cons.notifier_del = notifier_del_vio; + virtio_cons.notifier_hangup = notifier_del_vio; /* The first argument of hvc_alloc() is the virtual console number, so * we use zero. The second argument is the parameter for the diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index dbd42d6c93a7..7f2ee27fe76b 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -127,6 +127,13 @@ config GPIO_PCF857X This driver provides an in-kernel interface to those GPIOs using platform-neutral GPIO calls. +config GPIO_TWL4030 + tristate "TWL4030, TWL5030, and TPS659x0 GPIOs" + depends on TWL4030_CORE + help + Say yes here to access the GPIO signals of various multi-function + power management chips from Texas Instruments. + comment "PCI GPIO expanders:" config GPIO_BT8XX diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile index 01b4bbde1956..6aafdeb9ad03 100644 --- a/drivers/gpio/Makefile +++ b/drivers/gpio/Makefile @@ -9,4 +9,5 @@ obj-$(CONFIG_GPIO_MAX732X) += max732x.o obj-$(CONFIG_GPIO_MCP23S08) += mcp23s08.o obj-$(CONFIG_GPIO_PCA953X) += pca953x.o obj-$(CONFIG_GPIO_PCF857X) += pcf857x.o +obj-$(CONFIG_GPIO_TWL4030) += twl4030-gpio.o obj-$(CONFIG_GPIO_BT8XX) += bt8xxgpio.o diff --git a/drivers/gpio/twl4030-gpio.c b/drivers/gpio/twl4030-gpio.c new file mode 100644 index 000000000000..37d3eec8730a --- /dev/null +++ b/drivers/gpio/twl4030-gpio.c @@ -0,0 +1,521 @@ +/* + * twl4030_gpio.c -- access to GPIOs on TWL4030/TPS659x0 chips + * + * Copyright (C) 2006-2007 Texas Instruments, Inc. + * Copyright (C) 2006 MontaVista Software, Inc. + * + * Code re-arranged and cleaned up by: + * Syed Mohammed Khasim <x0khasim@ti.com> + * + * Initial Code: + * Andy Lowe / Nishanth Menon + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/kthread.h> +#include <linux/irq.h> +#include <linux/gpio.h> +#include <linux/platform_device.h> +#include <linux/slab.h> + +#include <linux/i2c/twl4030.h> + + +/* + * The GPIO "subchip" supports 18 GPIOs which can be configured as + * inputs or outputs, with pullups or pulldowns on each pin. Each + * GPIO can trigger interrupts on either or both edges. + * + * GPIO interrupts can be fed to either of two IRQ lines; this is + * intended to support multiple hosts. + * + * There are also two LED pins used sometimes as output-only GPIOs. + */ + + +static struct gpio_chip twl_gpiochip; +static int twl4030_gpio_irq_base; + +/* genirq interfaces are not available to modules */ +#ifdef MODULE +#define is_module() true +#else +#define is_module() false +#endif + +/* GPIO_CTRL Fields */ +#define MASK_GPIO_CTRL_GPIO0CD1 BIT(0) +#define MASK_GPIO_CTRL_GPIO1CD2 BIT(1) +#define MASK_GPIO_CTRL_GPIO_ON BIT(2) + +/* Mask for GPIO registers when aggregated into a 32-bit integer */ +#define GPIO_32_MASK 0x0003ffff + +/* Data structures */ +static DEFINE_MUTEX(gpio_lock); + +/* store usage of each GPIO. - each bit represents one GPIO */ +static unsigned int gpio_usage_count; + +/*----------------------------------------------------------------------*/ + +/* + * To configure TWL4030 GPIO module registers + */ +static inline int gpio_twl4030_write(u8 address, u8 data) +{ + return twl4030_i2c_write_u8(TWL4030_MODULE_GPIO, data, address); +} + +/*----------------------------------------------------------------------*/ + +/* + * LED register offsets (use TWL4030_MODULE_{LED,PWMA,PWMB})) + * PWMs A and B are dedicated to LEDs A and B, respectively. + */ + +#define TWL4030_LED_LEDEN 0x0 + +/* LEDEN bits */ +#define LEDEN_LEDAON BIT(0) +#define LEDEN_LEDBON BIT(1) +#define LEDEN_LEDAEXT BIT(2) +#define LEDEN_LEDBEXT BIT(3) +#define LEDEN_LEDAPWM BIT(4) +#define LEDEN_LEDBPWM BIT(5) +#define LEDEN_PWM_LENGTHA BIT(6) +#define LEDEN_PWM_LENGTHB BIT(7) + +#define TWL4030_PWMx_PWMxON 0x0 +#define TWL4030_PWMx_PWMxOFF 0x1 + +#define PWMxON_LENGTH BIT(7) + +/*----------------------------------------------------------------------*/ + +/* + * To read a TWL4030 GPIO module register + */ +static inline int gpio_twl4030_read(u8 address) +{ + u8 data; + int ret = 0; + + ret = twl4030_i2c_read_u8(TWL4030_MODULE_GPIO, &data, address); + return (ret < 0) ? ret : data; +} + +/*----------------------------------------------------------------------*/ + +static u8 cached_leden; /* protected by gpio_lock */ + +/* The LED lines are open drain outputs ... a FET pulls to GND, so an + * external pullup is needed. We could also expose the integrated PWM + * as a LED brightness control; we initialize it as "always on". + */ +static void twl4030_led_set_value(int led, int value) +{ + u8 mask = LEDEN_LEDAON | LEDEN_LEDAPWM; + int status; + + if (led) + mask <<= 1; + + mutex_lock(&gpio_lock); + if (value) + cached_leden &= ~mask; + else + cached_leden |= mask; + status = twl4030_i2c_write_u8(TWL4030_MODULE_LED, cached_leden, + TWL4030_LED_LEDEN); + mutex_unlock(&gpio_lock); +} + +static int twl4030_set_gpio_direction(int gpio, int is_input) +{ + u8 d_bnk = gpio >> 3; + u8 d_msk = BIT(gpio & 0x7); + u8 reg = 0; + u8 base = REG_GPIODATADIR1 + d_bnk; + int ret = 0; + + mutex_lock(&gpio_lock); + ret = gpio_twl4030_read(base); + if (ret >= 0) { + if (is_input) + reg = ret & ~d_msk; + else + reg = ret | d_msk; + + ret = gpio_twl4030_write(base, reg); + } + mutex_unlock(&gpio_lock); + return ret; +} + +static int twl4030_set_gpio_dataout(int gpio, int enable) +{ + u8 d_bnk = gpio >> 3; + u8 d_msk = BIT(gpio & 0x7); + u8 base = 0; + + if (enable) + base = REG_SETGPIODATAOUT1 + d_bnk; + else + base = REG_CLEARGPIODATAOUT1 + d_bnk; + + return gpio_twl4030_write(base, d_msk); +} + +static int twl4030_get_gpio_datain(int gpio) +{ + u8 d_bnk = gpio >> 3; + u8 d_off = gpio & 0x7; + u8 base = 0; + int ret = 0; + + if (unlikely((gpio >= TWL4030_GPIO_MAX) + || !(gpio_usage_count & BIT(gpio)))) + return -EPERM; + + base = REG_GPIODATAIN1 + d_bnk; + ret = gpio_twl4030_read(base); + if (ret > 0) + ret = (ret >> d_off) & 0x1; + + return ret; +} + +/* + * Configure debounce timing value for a GPIO pin on TWL4030 + */ +int twl4030_set_gpio_debounce(int gpio, int enable) +{ + u8 d_bnk = gpio >> 3; + u8 d_msk = BIT(gpio & 0x7); + u8 reg = 0; + u8 base = 0; + int ret = 0; + + if (unlikely((gpio >= TWL4030_GPIO_MAX) + || !(gpio_usage_count & BIT(gpio)))) + return -EPERM; + + base = REG_GPIO_DEBEN1 + d_bnk; + mutex_lock(&gpio_lock); + ret = gpio_twl4030_read(base); + if (ret >= 0) { + if (enable) + reg = ret | d_msk; + else + reg = ret & ~d_msk; + + ret = gpio_twl4030_write(base, reg); + } + mutex_unlock(&gpio_lock); + return ret; +} +EXPORT_SYMBOL(twl4030_set_gpio_debounce); + +/*----------------------------------------------------------------------*/ + +static int twl_request(struct gpio_chip *chip, unsigned offset) +{ + int status = 0; + + mutex_lock(&gpio_lock); + + /* Support the two LED outputs as output-only GPIOs. */ + if (offset >= TWL4030_GPIO_MAX) { + u8 ledclr_mask = LEDEN_LEDAON | LEDEN_LEDAEXT + | LEDEN_LEDAPWM | LEDEN_PWM_LENGTHA; + u8 module = TWL4030_MODULE_PWMA; + + offset -= TWL4030_GPIO_MAX; + if (offset) { + ledclr_mask <<= 1; + module = TWL4030_MODULE_PWMB; + } + + /* initialize PWM to always-drive */ + status = twl4030_i2c_write_u8(module, 0x7f, + TWL4030_PWMx_PWMxOFF); + if (status < 0) + goto done; + status = twl4030_i2c_write_u8(module, 0x7f, + TWL4030_PWMx_PWMxON); + if (status < 0) + goto done; + + /* init LED to not-driven (high) */ + module = TWL4030_MODULE_LED; + status = twl4030_i2c_read_u8(module, &cached_leden, + TWL4030_LED_LEDEN); + if (status < 0) + goto done; + cached_leden &= ~ledclr_mask; + status = twl4030_i2c_write_u8(module, cached_leden, + TWL4030_LED_LEDEN); + if (status < 0) + goto done; + + status = 0; + goto done; + } + + /* on first use, turn GPIO module "on" */ + if (!gpio_usage_count) { + struct twl4030_gpio_platform_data *pdata; + u8 value = MASK_GPIO_CTRL_GPIO_ON; + + /* optionally have the first two GPIOs switch vMMC1 + * and vMMC2 power supplies based on card presence. + */ + pdata = chip->dev->platform_data; + value |= pdata->mmc_cd & 0x03; + + status = gpio_twl4030_write(REG_GPIO_CTRL, value); + } + + if (!status) + gpio_usage_count |= (0x1 << offset); + +done: + mutex_unlock(&gpio_lock); + return status; +} + +static void twl_free(struct gpio_chip *chip, unsigned offset) +{ + if (offset >= TWL4030_GPIO_MAX) { + twl4030_led_set_value(offset - TWL4030_GPIO_MAX, 1); + return; + } + + mutex_lock(&gpio_lock); + + gpio_usage_count &= ~BIT(offset); + + /* on last use, switch off GPIO module */ + if (!gpio_usage_count) + gpio_twl4030_write(REG_GPIO_CTRL, 0x0); + + mutex_unlock(&gpio_lock); +} + +static int twl_direction_in(struct gpio_chip *chip, unsigned offset) +{ + return (offset < TWL4030_GPIO_MAX) + ? twl4030_set_gpio_direction(offset, 1) + : -EINVAL; +} + +static int twl_get(struct gpio_chip *chip, unsigned offset) +{ + int status = 0; + + if (offset < TWL4030_GPIO_MAX) + status = twl4030_get_gpio_datain(offset); + else if (offset == TWL4030_GPIO_MAX) + status = cached_leden & LEDEN_LEDAON; + else + status = cached_leden & LEDEN_LEDBON; + return (status < 0) ? 0 : status; +} + +static int twl_direction_out(struct gpio_chip *chip, unsigned offset, int value) +{ + if (offset < TWL4030_GPIO_MAX) { + twl4030_set_gpio_dataout(offset, value); + return twl4030_set_gpio_direction(offset, 0); + } else { + twl4030_led_set_value(offset - TWL4030_GPIO_MAX, value); + return 0; + } +} + +static void twl_set(struct gpio_chip *chip, unsigned offset, int value) +{ + if (offset < TWL4030_GPIO_MAX) + twl4030_set_gpio_dataout(offset, value); + else + twl4030_led_set_value(offset - TWL4030_GPIO_MAX, value); +} + +static int twl_to_irq(struct gpio_chip *chip, unsigned offset) +{ + return (twl4030_gpio_irq_base && (offset < TWL4030_GPIO_MAX)) + ? (twl4030_gpio_irq_base + offset) + : -EINVAL; +} + +static struct gpio_chip twl_gpiochip = { + .label = "twl4030", + .owner = THIS_MODULE, + .request = twl_request, + .free = twl_free, + .direction_input = twl_direction_in, + .get = twl_get, + .direction_output = twl_direction_out, + .set = twl_set, + .to_irq = twl_to_irq, + .can_sleep = 1, +}; + +/*----------------------------------------------------------------------*/ + +static int __devinit gpio_twl4030_pulls(u32 ups, u32 downs) +{ + u8 message[6]; + unsigned i, gpio_bit; + + /* For most pins, a pulldown was enabled by default. + * We should have data that's specific to this board. + */ + for (gpio_bit = 1, i = 1; i < 6; i++) { + u8 bit_mask; + unsigned j; + + for (bit_mask = 0, j = 0; j < 8; j += 2, gpio_bit <<= 1) { + if (ups & gpio_bit) + bit_mask |= 1 << (j + 1); + else if (downs & gpio_bit) + bit_mask |= 1 << (j + 0); + } + message[i] = bit_mask; + } + + return twl4030_i2c_write(TWL4030_MODULE_GPIO, message, + REG_GPIOPUPDCTR1, 5); +} + +static int gpio_twl4030_remove(struct platform_device *pdev); + +static int __devinit gpio_twl4030_probe(struct platform_device *pdev) +{ + struct twl4030_gpio_platform_data *pdata = pdev->dev.platform_data; + int ret; + + /* maybe setup IRQs */ + if (pdata->irq_base) { + if (is_module()) { + dev_err(&pdev->dev, + "can't dispatch IRQs from modules\n"); + goto no_irqs; + } + ret = twl4030_sih_setup(TWL4030_MODULE_GPIO); + if (ret < 0) + return ret; + WARN_ON(ret != pdata->irq_base); + twl4030_gpio_irq_base = ret; + } + +no_irqs: + /* + * NOTE: boards may waste power if they don't set pullups + * and pulldowns correctly ... default for non-ULPI pins is + * pulldown, and some other pins may have external pullups + * or pulldowns. Careful! + */ + ret = gpio_twl4030_pulls(pdata->pullups, pdata->pulldowns); + if (ret) + dev_dbg(&pdev->dev, "pullups %.05x %.05x --> %d\n", + pdata->pullups, pdata->pulldowns, + ret); + + twl_gpiochip.base = pdata->gpio_base; + twl_gpiochip.ngpio = TWL4030_GPIO_MAX; + twl_gpiochip.dev = &pdev->dev; + + /* NOTE: we assume VIBRA_CTL.VIBRA_EN, in MODULE_AUDIO_VOICE, + * is (still) clear if use_leds is set. + */ + if (pdata->use_leds) + twl_gpiochip.ngpio += 2; + + ret = gpiochip_add(&twl_gpiochip); + if (ret < 0) { + dev_err(&pdev->dev, + "could not register gpiochip, %d\n", + ret); + twl_gpiochip.ngpio = 0; + gpio_twl4030_remove(pdev); + } else if (pdata->setup) { + int status; + + status = pdata->setup(&pdev->dev, + pdata->gpio_base, TWL4030_GPIO_MAX); + if (status) + dev_dbg(&pdev->dev, "setup --> %d\n", status); + } + + return ret; +} + +static int __devexit gpio_twl4030_remove(struct platform_device *pdev) +{ + struct twl4030_gpio_platform_data *pdata = pdev->dev.platform_data; + int status; + + if (pdata->teardown) { + status = pdata->teardown(&pdev->dev, + pdata->gpio_base, TWL4030_GPIO_MAX); + if (status) { + dev_dbg(&pdev->dev, "teardown --> %d\n", status); + return status; + } + } + + status = gpiochip_remove(&twl_gpiochip); + if (status < 0) + return status; + + if (is_module()) + return 0; + + /* REVISIT no support yet for deregistering all the IRQs */ + WARN_ON(1); + return -EIO; +} + +/* Note: this hardware lives inside an I2C-based multi-function device. */ +MODULE_ALIAS("platform:twl4030_gpio"); + +static struct platform_driver gpio_twl4030_driver = { + .driver.name = "twl4030_gpio", + .driver.owner = THIS_MODULE, + .probe = gpio_twl4030_probe, + .remove = __devexit_p(gpio_twl4030_remove), +}; + +static int __init gpio_twl4030_init(void) +{ + return platform_driver_register(&gpio_twl4030_driver); +} +subsys_initcall(gpio_twl4030_init); + +static void __exit gpio_twl4030_exit(void) +{ + platform_driver_unregister(&gpio_twl4030_driver); +} +module_exit(gpio_twl4030_exit); + +MODULE_AUTHOR("Texas Instruments, Inc."); +MODULE_DESCRIPTION("GPIO interface for TWL4030"); +MODULE_LICENSE("GPL"); diff --git a/drivers/gpu/drm/drm_drawable.c b/drivers/gpu/drm/drm_drawable.c index 1839c57663c5..80be1cab62af 100644 --- a/drivers/gpu/drm/drm_drawable.c +++ b/drivers/gpu/drm/drm_drawable.c @@ -76,11 +76,18 @@ int drm_rmdraw(struct drm_device *dev, void *data, struct drm_file *file_priv) { struct drm_draw *draw = data; unsigned long irqflags; + struct drm_drawable_info *info; spin_lock_irqsave(&dev->drw_lock, irqflags); - drm_free(drm_get_drawable_info(dev, draw->handle), - sizeof(struct drm_drawable_info), DRM_MEM_BUFS); + info = drm_get_drawable_info(dev, draw->handle); + if (info == NULL) { + spin_unlock_irqrestore(&dev->drw_lock, irqflags); + return -EINVAL; + } + drm_free(info->rects, info->num_rects * sizeof(struct drm_clip_rect), + DRM_MEM_BUFS); + drm_free(info, sizeof(struct drm_drawable_info), DRM_MEM_BUFS); idr_remove(&dev->drw_idr, draw->handle); @@ -111,7 +118,9 @@ int drm_update_drawable_info(struct drm_device *dev, void *data, struct drm_file switch (update->type) { case DRM_DRAWABLE_CLIPRECTS: - if (update->num != info->num_rects) { + if (update->num == 0) + rects = NULL; + else if (update->num != info->num_rects) { rects = drm_alloc(update->num * sizeof(struct drm_clip_rect), DRM_MEM_BUFS); } else diff --git a/drivers/gpu/drm/drm_ioc32.c b/drivers/gpu/drm/drm_ioc32.c index 90f5a8d9bdcb..920b72fbc958 100644 --- a/drivers/gpu/drm/drm_ioc32.c +++ b/drivers/gpu/drm/drm_ioc32.c @@ -64,6 +64,8 @@ #define DRM_IOCTL_SG_ALLOC32 DRM_IOW( 0x38, drm_scatter_gather32_t) #define DRM_IOCTL_SG_FREE32 DRM_IOW( 0x39, drm_scatter_gather32_t) +#define DRM_IOCTL_UPDATE_DRAW32 DRM_IOW( 0x3f, drm_update_draw32_t) + #define DRM_IOCTL_WAIT_VBLANK32 DRM_IOWR(0x3a, drm_wait_vblank32_t) typedef struct drm_version_32 { @@ -952,6 +954,37 @@ static int compat_drm_sg_free(struct file *file, unsigned int cmd, DRM_IOCTL_SG_FREE, (unsigned long)request); } +typedef struct drm_update_draw32 { + drm_drawable_t handle; + unsigned int type; + unsigned int num; + /* 64-bit version has a 32-bit pad here */ + u64 data; /**< Pointer */ +} __attribute__((packed)) drm_update_draw32_t; + +static int compat_drm_update_draw(struct file *file, unsigned int cmd, + unsigned long arg) +{ + drm_update_draw32_t update32; + struct drm_update_draw __user *request; + int err; + + if (copy_from_user(&update32, (void __user *)arg, sizeof(update32))) + return -EFAULT; + + request = compat_alloc_user_space(sizeof(*request)); + if (!access_ok(VERIFY_WRITE, request, sizeof(*request)) || + __put_user(update32.handle, &request->handle) || + __put_user(update32.type, &request->type) || + __put_user(update32.num, &request->num) || + __put_user(update32.data, &request->data)) + return -EFAULT; + + err = drm_ioctl(file->f_path.dentry->d_inode, file, + DRM_IOCTL_UPDATE_DRAW, (unsigned long)request); + return err; +} + struct drm_wait_vblank_request32 { enum drm_vblank_seq_type type; unsigned int sequence; @@ -1033,6 +1066,7 @@ drm_ioctl_compat_t *drm_compat_ioctls[] = { #endif [DRM_IOCTL_NR(DRM_IOCTL_SG_ALLOC32)] = compat_drm_sg_alloc, [DRM_IOCTL_NR(DRM_IOCTL_SG_FREE32)] = compat_drm_sg_free, + [DRM_IOCTL_NR(DRM_IOCTL_UPDATE_DRAW32)] = compat_drm_update_draw, [DRM_IOCTL_NR(DRM_IOCTL_WAIT_VBLANK32)] = compat_drm_wait_vblank, }; diff --git a/drivers/gpu/drm/drm_irq.c b/drivers/gpu/drm/drm_irq.c index 4091b9e291f9..212a94f715b2 100644 --- a/drivers/gpu/drm/drm_irq.c +++ b/drivers/gpu/drm/drm_irq.c @@ -594,11 +594,14 @@ int drm_wait_vblank(struct drm_device *dev, void *data, goto done; } + /* Get a refcount on the vblank, which will be released by + * drm_vbl_send_signals(). + */ ret = drm_vblank_get(dev, crtc); if (ret) { drm_free(vbl_sig, sizeof(struct drm_vbl_sig), DRM_MEM_DRIVER); - return ret; + goto done; } atomic_inc(&dev->vbl_signal_pending); diff --git a/drivers/gpu/drm/drm_lock.c b/drivers/gpu/drm/drm_lock.c index a4caf95485d7..888159e03d26 100644 --- a/drivers/gpu/drm/drm_lock.c +++ b/drivers/gpu/drm/drm_lock.c @@ -232,6 +232,7 @@ int drm_lock_take(struct drm_lock_data *lock_data, } return 0; } +EXPORT_SYMBOL(drm_lock_take); /** * This takes a lock forcibly and hands it to context. Should ONLY be used @@ -299,6 +300,7 @@ int drm_lock_free(struct drm_lock_data *lock_data, unsigned int context) wake_up_interruptible(&lock_data->lock_queue); return 0; } +EXPORT_SYMBOL(drm_lock_free); /** * If we get here, it means that the process has called DRM_IOCTL_LOCK diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c index db34780edbb2..01de536e0211 100644 --- a/drivers/gpu/drm/i915/i915_dma.c +++ b/drivers/gpu/drm/i915/i915_dma.c @@ -844,8 +844,11 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags) * correctly in testing on 945G. * This may be a side effect of MSI having been made available for PEG * and the registers being closely associated. + * + * According to chipset errata, on the 965GM, MSI interrupts may + * be lost or delayed */ - if (!IS_I945G(dev) && !IS_I945GM(dev)) + if (!IS_I945G(dev) && !IS_I945GM(dev) && !IS_I965GM(dev)) if (pci_enable_msi(dev->pdev)) DRM_ERROR("failed to enable MSI\n"); diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index eae4ed3956e0..f20ffe17df71 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -90,7 +90,7 @@ struct mem_block { typedef struct _drm_i915_vbl_swap { struct list_head head; drm_drawable_t drw_id; - unsigned int plane; + unsigned int pipe; unsigned int sequence; } drm_i915_vbl_swap_t; @@ -240,6 +240,9 @@ typedef struct drm_i915_private { u8 saveDACDATA[256*3]; /* 256 3-byte colors */ u8 saveCR[37]; + /** Work task for vblank-related ring access */ + struct work_struct vblank_work; + struct { struct drm_mm gtt_space; @@ -285,9 +288,6 @@ typedef struct drm_i915_private { */ struct delayed_work retire_work; - /** Work task for vblank-related ring access */ - struct work_struct vblank_work; - uint32_t next_gem_seqno; /** @@ -441,7 +441,7 @@ extern int i915_irq_wait(struct drm_device *dev, void *data, void i915_user_irq_get(struct drm_device *dev); void i915_user_irq_put(struct drm_device *dev); -extern void i915_gem_vblank_work_handler(struct work_struct *work); +extern void i915_vblank_work_handler(struct work_struct *work); extern irqreturn_t i915_driver_irq_handler(DRM_IRQ_ARGS); extern void i915_driver_irq_preinstall(struct drm_device * dev); extern int i915_driver_irq_postinstall(struct drm_device *dev); diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index dc2e6fdb6ca3..17ae330ff269 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -2564,8 +2564,6 @@ i915_gem_load(struct drm_device *dev) INIT_LIST_HEAD(&dev_priv->mm.request_list); INIT_DELAYED_WORK(&dev_priv->mm.retire_work, i915_gem_retire_work_handler); - INIT_WORK(&dev_priv->mm.vblank_work, - i915_gem_vblank_work_handler); dev_priv->mm.next_gem_seqno = 1; i915_gem_detect_bit_6_swizzle(dev); diff --git a/drivers/gpu/drm/i915/i915_gem_proc.c b/drivers/gpu/drm/i915/i915_gem_proc.c index 15d4160415b0..93de15b4c9a7 100644 --- a/drivers/gpu/drm/i915/i915_gem_proc.c +++ b/drivers/gpu/drm/i915/i915_gem_proc.c @@ -192,7 +192,12 @@ static int i915_gem_seqno_info(char *buf, char **start, off_t offset, *start = &buf[offset]; *eof = 0; - DRM_PROC_PRINT("Current sequence: %d\n", i915_get_gem_seqno(dev)); + if (dev_priv->hw_status_page != NULL) { + DRM_PROC_PRINT("Current sequence: %d\n", + i915_get_gem_seqno(dev)); + } else { + DRM_PROC_PRINT("Current sequence: hws uninitialized\n"); + } DRM_PROC_PRINT("Waiter sequence: %d\n", dev_priv->mm.waiting_gem_seqno); DRM_PROC_PRINT("IRQ sequence: %d\n", dev_priv->mm.irq_gem_seqno); @@ -230,8 +235,12 @@ static int i915_interrupt_info(char *buf, char **start, off_t offset, I915_READ(PIPEBSTAT)); DRM_PROC_PRINT("Interrupts received: %d\n", atomic_read(&dev_priv->irq_received)); - DRM_PROC_PRINT("Current sequence: %d\n", - i915_get_gem_seqno(dev)); + if (dev_priv->hw_status_page != NULL) { + DRM_PROC_PRINT("Current sequence: %d\n", + i915_get_gem_seqno(dev)); + } else { + DRM_PROC_PRINT("Current sequence: hws uninitialized\n"); + } DRM_PROC_PRINT("Waiter sequence: %d\n", dev_priv->mm.waiting_gem_seqno); DRM_PROC_PRINT("IRQ sequence: %d\n", diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c index baae511c785b..26f48932a51e 100644 --- a/drivers/gpu/drm/i915/i915_irq.c +++ b/drivers/gpu/drm/i915/i915_irq.c @@ -60,43 +60,6 @@ i915_disable_irq(drm_i915_private_t *dev_priv, u32 mask) } /** - * i915_get_pipe - return the the pipe associated with a given plane - * @dev: DRM device - * @plane: plane to look for - * - * The Intel Mesa & 2D drivers call the vblank routines with a plane number - * rather than a pipe number, since they may not always be equal. This routine - * maps the given @plane back to a pipe number. - */ -static int -i915_get_pipe(struct drm_device *dev, int plane) -{ - drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; - u32 dspcntr; - - dspcntr = plane ? I915_READ(DSPBCNTR) : I915_READ(DSPACNTR); - - return dspcntr & DISPPLANE_SEL_PIPE_MASK ? 1 : 0; -} - -/** - * i915_get_plane - return the the plane associated with a given pipe - * @dev: DRM device - * @pipe: pipe to look for - * - * The Intel Mesa & 2D drivers call the vblank routines with a plane number - * rather than a plane number, since they may not always be equal. This routine - * maps the given @pipe back to a plane number. - */ -static int -i915_get_plane(struct drm_device *dev, int pipe) -{ - if (i915_get_pipe(dev, 0) == pipe) - return 0; - return 1; -} - -/** * i915_pipe_enabled - check if a pipe is enabled * @dev: DRM device * @pipe: pipe to check @@ -121,6 +84,9 @@ i915_pipe_enabled(struct drm_device *dev, int pipe) * Emit blits for scheduled buffer swaps. * * This function will be called with the HW lock held. + * Because this function must grab the ring mutex (dev->struct_mutex), + * it can no longer run at soft irq time. We'll fix this when we do + * the DRI2 swap buffer work. */ static void i915_vblank_tasklet(struct drm_device *dev) { @@ -141,6 +107,8 @@ static void i915_vblank_tasklet(struct drm_device *dev) u32 ropcpp = (0xcc << 16) | ((cpp - 1) << 24); RING_LOCALS; + mutex_lock(&dev->struct_mutex); + if (IS_I965G(dev) && sarea_priv->front_tiled) { cmd |= XY_SRC_COPY_BLT_DST_TILED; dst_pitch >>= 2; @@ -165,7 +133,7 @@ static void i915_vblank_tasklet(struct drm_device *dev) list_for_each_safe(list, tmp, &dev_priv->vbl_swaps.head) { drm_i915_vbl_swap_t *vbl_swap = list_entry(list, drm_i915_vbl_swap_t, head); - int pipe = i915_get_pipe(dev, vbl_swap->plane); + int pipe = vbl_swap->pipe; if ((counter[pipe] - vbl_swap->sequence) > (1<<23)) continue; @@ -179,20 +147,19 @@ static void i915_vblank_tasklet(struct drm_device *dev) drw = drm_get_drawable_info(dev, vbl_swap->drw_id); - if (!drw) { - spin_unlock(&dev->drw_lock); - drm_free(vbl_swap, sizeof(*vbl_swap), DRM_MEM_DRIVER); - spin_lock(&dev_priv->swaps_lock); - continue; - } - list_for_each(hit, &hits) { drm_i915_vbl_swap_t *swap_cmp = list_entry(hit, drm_i915_vbl_swap_t, head); struct drm_drawable_info *drw_cmp = drm_get_drawable_info(dev, swap_cmp->drw_id); - if (drw_cmp && + /* Make sure both drawables are still + * around and have some rectangles before + * we look inside to order them for the + * blts below. + */ + if (drw_cmp && drw_cmp->num_rects > 0 && + drw && drw->num_rects > 0 && drw_cmp->rects[0].y1 > drw->rects[0].y1) { list_add_tail(list, hit); break; @@ -212,6 +179,7 @@ static void i915_vblank_tasklet(struct drm_device *dev) if (nhits == 0) { spin_unlock_irqrestore(&dev_priv->swaps_lock, irqflags); + mutex_unlock(&dev->struct_mutex); return; } @@ -265,18 +233,21 @@ static void i915_vblank_tasklet(struct drm_device *dev) drm_i915_vbl_swap_t *swap_hit = list_entry(hit, drm_i915_vbl_swap_t, head); struct drm_clip_rect *rect; - int num_rects, plane; + int num_rects, pipe; unsigned short top, bottom; drw = drm_get_drawable_info(dev, swap_hit->drw_id); + /* The drawable may have been destroyed since + * the vblank swap was queued + */ if (!drw) continue; rect = drw->rects; - plane = swap_hit->plane; - top = upper[plane]; - bottom = lower[plane]; + pipe = swap_hit->pipe; + top = upper[pipe]; + bottom = lower[pipe]; for (num_rects = drw->num_rects; num_rects--; rect++) { int y1 = max(rect->y1, top); @@ -302,6 +273,7 @@ static void i915_vblank_tasklet(struct drm_device *dev) } spin_unlock_irqrestore(&dev->drw_lock, irqflags); + mutex_unlock(&dev->struct_mutex); list_for_each_safe(hit, tmp, &hits) { drm_i915_vbl_swap_t *swap_hit = @@ -313,15 +285,16 @@ static void i915_vblank_tasklet(struct drm_device *dev) } } -u32 i915_get_vblank_counter(struct drm_device *dev, int plane) +/* Called from drm generic code, passed a 'crtc', which + * we use as a pipe index + */ +u32 i915_get_vblank_counter(struct drm_device *dev, int pipe) { drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; unsigned long high_frame; unsigned long low_frame; u32 high1, high2, low, count; - int pipe; - pipe = i915_get_pipe(dev, plane); high_frame = pipe ? PIPEBFRAMEHIGH : PIPEAFRAMEHIGH; low_frame = pipe ? PIPEBFRAMEPIXEL : PIPEAFRAMEPIXEL; @@ -350,18 +323,37 @@ u32 i915_get_vblank_counter(struct drm_device *dev, int plane) } void -i915_gem_vblank_work_handler(struct work_struct *work) +i915_vblank_work_handler(struct work_struct *work) { - drm_i915_private_t *dev_priv; - struct drm_device *dev; + drm_i915_private_t *dev_priv = container_of(work, drm_i915_private_t, + vblank_work); + struct drm_device *dev = dev_priv->dev; + unsigned long irqflags; - dev_priv = container_of(work, drm_i915_private_t, - mm.vblank_work); - dev = dev_priv->dev; + if (dev->lock.hw_lock == NULL) { + i915_vblank_tasklet(dev); + return; + } + + spin_lock_irqsave(&dev->tasklet_lock, irqflags); + dev->locked_tasklet_func = i915_vblank_tasklet; + spin_unlock_irqrestore(&dev->tasklet_lock, irqflags); + + /* Try to get the lock now, if this fails, the lock + * holder will execute the tasklet during unlock + */ + if (!drm_lock_take(&dev->lock, DRM_KERNEL_CONTEXT)) + return; + + dev->lock.lock_time = jiffies; + atomic_inc(&dev->counts[_DRM_STAT_LOCKS]); + + spin_lock_irqsave(&dev->tasklet_lock, irqflags); + dev->locked_tasklet_func = NULL; + spin_unlock_irqrestore(&dev->tasklet_lock, irqflags); - mutex_lock(&dev->struct_mutex); i915_vblank_tasklet(dev); - mutex_unlock(&dev->struct_mutex); + drm_lock_free(&dev->lock, DRM_KERNEL_CONTEXT); } irqreturn_t i915_driver_irq_handler(DRM_IRQ_ARGS) @@ -398,7 +390,7 @@ irqreturn_t i915_driver_irq_handler(DRM_IRQ_ARGS) else if (pipea_stats & (PIPE_START_VBLANK_INTERRUPT_STATUS| PIPE_VBLANK_INTERRUPT_STATUS)) { vblank++; - drm_handle_vblank(dev, i915_get_plane(dev, 0)); + drm_handle_vblank(dev, 0); } I915_WRITE(PIPEASTAT, pipea_stats); @@ -416,7 +408,7 @@ irqreturn_t i915_driver_irq_handler(DRM_IRQ_ARGS) else if (pipeb_stats & (PIPE_START_VBLANK_INTERRUPT_STATUS| PIPE_VBLANK_INTERRUPT_STATUS)) { vblank++; - drm_handle_vblank(dev, i915_get_plane(dev, 1)); + drm_handle_vblank(dev, 1); } if (pipeb_stats & I915_LEGACY_BLC_EVENT_STATUS) @@ -441,12 +433,8 @@ irqreturn_t i915_driver_irq_handler(DRM_IRQ_ARGS) if (iir & I915_ASLE_INTERRUPT) opregion_asle_intr(dev); - if (vblank && dev_priv->swaps_pending > 0) { - if (dev_priv->ring.ring_obj == NULL) - drm_locked_tasklet(dev, i915_vblank_tasklet); - else - schedule_work(&dev_priv->mm.vblank_work); - } + if (vblank && dev_priv->swaps_pending > 0) + schedule_work(&dev_priv->vblank_work); return IRQ_HANDLED; } @@ -481,22 +469,24 @@ static int i915_emit_irq(struct drm_device * dev) void i915_user_irq_get(struct drm_device *dev) { drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; + unsigned long irqflags; - spin_lock(&dev_priv->user_irq_lock); + spin_lock_irqsave(&dev_priv->user_irq_lock, irqflags); if (dev->irq_enabled && (++dev_priv->user_irq_refcount == 1)) i915_enable_irq(dev_priv, I915_USER_INTERRUPT); - spin_unlock(&dev_priv->user_irq_lock); + spin_unlock_irqrestore(&dev_priv->user_irq_lock, irqflags); } void i915_user_irq_put(struct drm_device *dev) { drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; + unsigned long irqflags; - spin_lock(&dev_priv->user_irq_lock); + spin_lock_irqsave(&dev_priv->user_irq_lock, irqflags); BUG_ON(dev->irq_enabled && dev_priv->user_irq_refcount <= 0); if (dev->irq_enabled && (--dev_priv->user_irq_refcount == 0)) i915_disable_irq(dev_priv, I915_USER_INTERRUPT); - spin_unlock(&dev_priv->user_irq_lock); + spin_unlock_irqrestore(&dev_priv->user_irq_lock, irqflags); } static int i915_wait_irq(struct drm_device * dev, int irq_nr) @@ -578,74 +568,95 @@ int i915_irq_wait(struct drm_device *dev, void *data, return i915_wait_irq(dev, irqwait->irq_seq); } -int i915_enable_vblank(struct drm_device *dev, int plane) +/* Called from drm generic code, passed 'crtc' which + * we use as a pipe index + */ +int i915_enable_vblank(struct drm_device *dev, int pipe) { drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; - int pipe = i915_get_pipe(dev, plane); u32 pipestat_reg = 0; u32 pipestat; + u32 interrupt = 0; + unsigned long irqflags; switch (pipe) { case 0: pipestat_reg = PIPEASTAT; - i915_enable_irq(dev_priv, I915_DISPLAY_PIPE_A_EVENT_INTERRUPT); + interrupt = I915_DISPLAY_PIPE_A_EVENT_INTERRUPT; break; case 1: pipestat_reg = PIPEBSTAT; - i915_enable_irq(dev_priv, I915_DISPLAY_PIPE_B_EVENT_INTERRUPT); + interrupt = I915_DISPLAY_PIPE_B_EVENT_INTERRUPT; break; default: DRM_ERROR("tried to enable vblank on non-existent pipe %d\n", pipe); - break; + return 0; } - if (pipestat_reg) { - pipestat = I915_READ(pipestat_reg); - if (IS_I965G(dev)) - pipestat |= PIPE_START_VBLANK_INTERRUPT_ENABLE; - else - pipestat |= PIPE_VBLANK_INTERRUPT_ENABLE; - /* Clear any stale interrupt status */ - pipestat |= (PIPE_START_VBLANK_INTERRUPT_STATUS | - PIPE_VBLANK_INTERRUPT_STATUS); - I915_WRITE(pipestat_reg, pipestat); - } + spin_lock_irqsave(&dev_priv->user_irq_lock, irqflags); + /* Enabling vblank events in IMR comes before PIPESTAT write, or + * there's a race where the PIPESTAT vblank bit gets set to 1, so + * the OR of enabled PIPESTAT bits goes to 1, so the PIPExEVENT in + * ISR flashes to 1, but the IIR bit doesn't get set to 1 because + * IMR masks it. It doesn't ever get set after we clear the masking + * in IMR because the ISR bit is edge, not level-triggered, on the + * OR of PIPESTAT bits. + */ + i915_enable_irq(dev_priv, interrupt); + pipestat = I915_READ(pipestat_reg); + if (IS_I965G(dev)) + pipestat |= PIPE_START_VBLANK_INTERRUPT_ENABLE; + else + pipestat |= PIPE_VBLANK_INTERRUPT_ENABLE; + /* Clear any stale interrupt status */ + pipestat |= (PIPE_START_VBLANK_INTERRUPT_STATUS | + PIPE_VBLANK_INTERRUPT_STATUS); + I915_WRITE(pipestat_reg, pipestat); + (void) I915_READ(pipestat_reg); /* Posting read */ + spin_unlock_irqrestore(&dev_priv->user_irq_lock, irqflags); return 0; } -void i915_disable_vblank(struct drm_device *dev, int plane) +/* Called from drm generic code, passed 'crtc' which + * we use as a pipe index + */ +void i915_disable_vblank(struct drm_device *dev, int pipe) { drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; - int pipe = i915_get_pipe(dev, plane); u32 pipestat_reg = 0; u32 pipestat; + u32 interrupt = 0; + unsigned long irqflags; switch (pipe) { case 0: pipestat_reg = PIPEASTAT; - i915_disable_irq(dev_priv, I915_DISPLAY_PIPE_A_EVENT_INTERRUPT); + interrupt = I915_DISPLAY_PIPE_A_EVENT_INTERRUPT; break; case 1: pipestat_reg = PIPEBSTAT; - i915_disable_irq(dev_priv, I915_DISPLAY_PIPE_B_EVENT_INTERRUPT); + interrupt = I915_DISPLAY_PIPE_B_EVENT_INTERRUPT; break; default: DRM_ERROR("tried to disable vblank on non-existent pipe %d\n", pipe); + return; break; } - if (pipestat_reg) { - pipestat = I915_READ(pipestat_reg); - pipestat &= ~(PIPE_START_VBLANK_INTERRUPT_ENABLE | - PIPE_VBLANK_INTERRUPT_ENABLE); - /* Clear any stale interrupt status */ - pipestat |= (PIPE_START_VBLANK_INTERRUPT_STATUS | - PIPE_VBLANK_INTERRUPT_STATUS); - I915_WRITE(pipestat_reg, pipestat); - } + spin_lock_irqsave(&dev_priv->user_irq_lock, irqflags); + i915_disable_irq(dev_priv, interrupt); + pipestat = I915_READ(pipestat_reg); + pipestat &= ~(PIPE_START_VBLANK_INTERRUPT_ENABLE | + PIPE_VBLANK_INTERRUPT_ENABLE); + /* Clear any stale interrupt status */ + pipestat |= (PIPE_START_VBLANK_INTERRUPT_STATUS | + PIPE_VBLANK_INTERRUPT_STATUS); + I915_WRITE(pipestat_reg, pipestat); + (void) I915_READ(pipestat_reg); /* Posting read */ + spin_unlock_irqrestore(&dev_priv->user_irq_lock, irqflags); } /* Set the vblank monitor pipe @@ -687,8 +698,8 @@ int i915_vblank_swap(struct drm_device *dev, void *data, { drm_i915_private_t *dev_priv = dev->dev_private; drm_i915_vblank_swap_t *swap = data; - drm_i915_vbl_swap_t *vbl_swap; - unsigned int pipe, seqtype, curseq, plane; + drm_i915_vbl_swap_t *vbl_swap, *vbl_old; + unsigned int pipe, seqtype, curseq; unsigned long irqflags; struct list_head *list; int ret; @@ -709,8 +720,7 @@ int i915_vblank_swap(struct drm_device *dev, void *data, return -EINVAL; } - plane = (swap->seqtype & _DRM_VBLANK_SECONDARY) ? 1 : 0; - pipe = i915_get_pipe(dev, plane); + pipe = (swap->seqtype & _DRM_VBLANK_SECONDARY) ? 1 : 0; seqtype = swap->seqtype & (_DRM_VBLANK_RELATIVE | _DRM_VBLANK_ABSOLUTE); @@ -751,44 +761,52 @@ int i915_vblank_swap(struct drm_device *dev, void *data, } } + vbl_swap = drm_calloc(1, sizeof(*vbl_swap), DRM_MEM_DRIVER); + + if (!vbl_swap) { + DRM_ERROR("Failed to allocate memory to queue swap\n"); + drm_vblank_put(dev, pipe); + return -ENOMEM; + } + + vbl_swap->drw_id = swap->drawable; + vbl_swap->pipe = pipe; + vbl_swap->sequence = swap->sequence; + spin_lock_irqsave(&dev_priv->swaps_lock, irqflags); list_for_each(list, &dev_priv->vbl_swaps.head) { - vbl_swap = list_entry(list, drm_i915_vbl_swap_t, head); + vbl_old = list_entry(list, drm_i915_vbl_swap_t, head); - if (vbl_swap->drw_id == swap->drawable && - vbl_swap->plane == plane && - vbl_swap->sequence == swap->sequence) { + if (vbl_old->drw_id == swap->drawable && + vbl_old->pipe == pipe && + vbl_old->sequence == swap->sequence) { spin_unlock_irqrestore(&dev_priv->swaps_lock, irqflags); + drm_vblank_put(dev, pipe); + drm_free(vbl_swap, sizeof(*vbl_swap), DRM_MEM_DRIVER); DRM_DEBUG("Already scheduled\n"); return 0; } } - spin_unlock_irqrestore(&dev_priv->swaps_lock, irqflags); - - if (dev_priv->swaps_pending >= 100) { + if (dev_priv->swaps_pending >= 10) { DRM_DEBUG("Too many swaps queued\n"); + DRM_DEBUG(" pipe 0: %d pipe 1: %d\n", + drm_vblank_count(dev, 0), + drm_vblank_count(dev, 1)); + + list_for_each(list, &dev_priv->vbl_swaps.head) { + vbl_old = list_entry(list, drm_i915_vbl_swap_t, head); + DRM_DEBUG("\tdrw %x pipe %d seq %x\n", + vbl_old->drw_id, vbl_old->pipe, + vbl_old->sequence); + } + spin_unlock_irqrestore(&dev_priv->swaps_lock, irqflags); drm_vblank_put(dev, pipe); + drm_free(vbl_swap, sizeof(*vbl_swap), DRM_MEM_DRIVER); return -EBUSY; } - vbl_swap = drm_calloc(1, sizeof(*vbl_swap), DRM_MEM_DRIVER); - - if (!vbl_swap) { - DRM_ERROR("Failed to allocate memory to queue swap\n"); - drm_vblank_put(dev, pipe); - return -ENOMEM; - } - - DRM_DEBUG("\n"); - - vbl_swap->drw_id = swap->drawable; - vbl_swap->plane = plane; - vbl_swap->sequence = swap->sequence; - - spin_lock_irqsave(&dev_priv->swaps_lock, irqflags); - list_add_tail(&vbl_swap->head, &dev_priv->vbl_swaps.head); dev_priv->swaps_pending++; @@ -815,6 +833,7 @@ int i915_driver_irq_postinstall(struct drm_device *dev) spin_lock_init(&dev_priv->swaps_lock); INIT_LIST_HEAD(&dev_priv->vbl_swaps.head); + INIT_WORK(&dev_priv->vblank_work, i915_vblank_work_handler); dev_priv->swaps_pending = 0; /* Set initial unmasked IRQs to just the selected vblank pipes. */ diff --git a/drivers/i2c/algos/i2c-algo-pcf.c b/drivers/i2c/algos/i2c-algo-pcf.c index 1e328d19cd6d..3e01992230b8 100644 --- a/drivers/i2c/algos/i2c-algo-pcf.c +++ b/drivers/i2c/algos/i2c-algo-pcf.c @@ -135,7 +135,7 @@ static int wait_for_pin(struct i2c_algo_pcf_data *adap, int *status) { *status = get_pcf(adap, 1); #ifndef STUB_I2C while (timeout-- && (*status & I2C_PCF_PIN)) { - adap->waitforpin(); + adap->waitforpin(adap->data); *status = get_pcf(adap, 1); } if (*status & I2C_PCF_LAB) { @@ -208,7 +208,7 @@ static int pcf_init_8584 (struct i2c_algo_pcf_data *adap) return -ENXIO; } - printk(KERN_DEBUG "i2c-algo-pcf.o: deteted and initialized PCF8584.\n"); + printk(KERN_DEBUG "i2c-algo-pcf.o: detected and initialized PCF8584.\n"); return 0; } @@ -331,13 +331,16 @@ static int pcf_xfer(struct i2c_adapter *i2c_adap, int i; int ret=0, timeout, status; + if (adap->xfer_begin) + adap->xfer_begin(adap->data); /* Check for bus busy */ timeout = wait_for_bb(adap); if (timeout) { DEB2(printk(KERN_ERR "i2c-algo-pcf.o: " "Timeout waiting for BB in pcf_xfer\n");) - return -EIO; + i = -EIO; + goto out; } for (i = 0;ret >= 0 && i < num; i++) { @@ -359,12 +362,14 @@ static int pcf_xfer(struct i2c_adapter *i2c_adap, if (timeout) { if (timeout == -EINTR) { /* arbitration lost */ - return (-EINTR); + i = -EINTR; + goto out; } i2c_stop(adap); DEB2(printk(KERN_ERR "i2c-algo-pcf.o: Timeout waiting " "for PIN(1) in pcf_xfer\n");) - return (-EREMOTEIO); + i = -EREMOTEIO; + goto out; } #ifndef STUB_I2C @@ -372,7 +377,8 @@ static int pcf_xfer(struct i2c_adapter *i2c_adap, if (status & I2C_PCF_LRB) { i2c_stop(adap); DEB2(printk(KERN_ERR "i2c-algo-pcf.o: No LRB(1) in pcf_xfer\n");) - return (-EREMOTEIO); + i = -EREMOTEIO; + goto out; } #endif @@ -404,6 +410,9 @@ static int pcf_xfer(struct i2c_adapter *i2c_adap, } } +out: + if (adap->xfer_end) + adap->xfer_end(adap->data); return (i); } diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index acadbc51fc0f..7f95905bbb9d 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -97,6 +97,7 @@ config I2C_I801 ICH9 Tolapai ICH10 + PCH This driver can also be built as a module. If so, the module will be called i2c-i801. diff --git a/drivers/i2c/busses/i2c-cpm.c b/drivers/i2c/busses/i2c-cpm.c index 8164de1f4d72..228f75723063 100644 --- a/drivers/i2c/busses/i2c-cpm.c +++ b/drivers/i2c/busses/i2c-cpm.c @@ -423,7 +423,6 @@ static const struct i2c_adapter cpm_ops = { .owner = THIS_MODULE, .name = "i2c-cpm", .algo = &cpm_i2c_algo, - .class = I2C_CLASS_HWMON | I2C_CLASS_SPD, }; static int __devinit cpm_i2c_setup(struct cpm_i2c *cpm) diff --git a/drivers/i2c/busses/i2c-elektor.c b/drivers/i2c/busses/i2c-elektor.c index 7f38c01fb3a0..0ed3ccb81b63 100644 --- a/drivers/i2c/busses/i2c-elektor.c +++ b/drivers/i2c/busses/i2c-elektor.c @@ -104,7 +104,8 @@ static int pcf_isa_getclock(void *data) return (clock); } -static void pcf_isa_waitforpin(void) { +static void pcf_isa_waitforpin(void *data) +{ DEFINE_WAIT(wait); int timeout = 2; unsigned long flags; diff --git a/drivers/i2c/busses/i2c-hydra.c b/drivers/i2c/busses/i2c-hydra.c index 1098f21ace13..648aa7baff83 100644 --- a/drivers/i2c/busses/i2c-hydra.c +++ b/drivers/i2c/busses/i2c-hydra.c @@ -123,7 +123,7 @@ static int __devinit hydra_probe(struct pci_dev *dev, hydra_adap.name)) return -EBUSY; - hydra_bit_data.data = ioremap(base, pci_resource_len(dev, 0)); + hydra_bit_data.data = pci_ioremap_bar(dev, 0); if (hydra_bit_data.data == NULL) { release_mem_region(base+offsetof(struct Hydra, CachePD), 4); return -ENODEV; diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c index dc7ea32b69a8..5123eb69a971 100644 --- a/drivers/i2c/busses/i2c-i801.c +++ b/drivers/i2c/busses/i2c-i801.c @@ -41,6 +41,7 @@ Tolapai 0x5032 32 hard yes yes yes ICH10 0x3a30 32 hard yes yes yes ICH10 0x3a60 32 hard yes yes yes + PCH 0x3b30 32 hard yes yes yes Features supported by this driver: Software PEC no @@ -576,6 +577,7 @@ static struct pci_device_id i801_ids[] = { { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_TOLAPAI_1) }, { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH10_4) }, { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH10_5) }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PCH_SMBUS) }, { 0, } }; @@ -599,6 +601,7 @@ static int __devinit i801_probe(struct pci_dev *dev, const struct pci_device_id case PCI_DEVICE_ID_INTEL_TOLAPAI_1: case PCI_DEVICE_ID_INTEL_ICH10_4: case PCI_DEVICE_ID_INTEL_ICH10_5: + case PCI_DEVICE_ID_INTEL_PCH_SMBUS: i801_features |= FEATURE_I2C_BLOCK_READ; /* fall through */ case PCI_DEVICE_ID_INTEL_82801DB_3: diff --git a/drivers/i2c/chips/Kconfig b/drivers/i2c/chips/Kconfig index 17356827b93d..4c35702830ce 100644 --- a/drivers/i2c/chips/Kconfig +++ b/drivers/i2c/chips/Kconfig @@ -1,6 +1,8 @@ # # Miscellaneous I2C chip drivers configuration # +# *** DEPRECATED! Do not add new entries! See Makefile *** +# menu "Miscellaneous I2C Chip support" diff --git a/drivers/i2c/chips/Makefile b/drivers/i2c/chips/Makefile index ca520fa143d6..23d2a31b0a64 100644 --- a/drivers/i2c/chips/Makefile +++ b/drivers/i2c/chips/Makefile @@ -1,7 +1,8 @@ # # Makefile for miscellaneous I2C chip drivers. # -# Think twice before you add a new driver to this directory. +# Do not add new drivers to this directory! It is DEPRECATED. +# # Device drivers are better grouped according to the functionality they # implement rather than to the bus they are connected to. In particular: # * Hardware monitoring chip drivers go to drivers/hwmon diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c index 42e852d79ffa..5a485c22660a 100644 --- a/drivers/i2c/i2c-core.c +++ b/drivers/i2c/i2c-core.c @@ -266,6 +266,9 @@ i2c_new_device(struct i2c_adapter *adap, struct i2c_board_info const *info) client->dev.platform_data = info->platform_data; + if (info->archdata) + client->dev.archdata = *info->archdata; + client->flags = info->flags; client->addr = info->addr; client->irq = info->irq; diff --git a/drivers/ide/Makefile b/drivers/ide/Makefile index 093d3248ca89..9cf92ac939d2 100644 --- a/drivers/ide/Makefile +++ b/drivers/ide/Makefile @@ -18,22 +18,66 @@ ide-core-$(CONFIG_BLK_DEV_IDEACPI) += ide-acpi.o obj-$(CONFIG_IDE) += ide-core.o -ifeq ($(CONFIG_IDE_ARM), y) - ide-arm-core-y += arm/ide_arm.o - obj-y += ide-arm-core.o -endif - -obj-$(CONFIG_IDE) += legacy/ pci/ +obj-$(CONFIG_IDE_ARM) += ide_arm.o + +obj-$(CONFIG_BLK_DEV_ALI14XX) += ali14xx.o +obj-$(CONFIG_BLK_DEV_UMC8672) += umc8672.o +obj-$(CONFIG_BLK_DEV_DTC2278) += dtc2278.o +obj-$(CONFIG_BLK_DEV_HT6560B) += ht6560b.o +obj-$(CONFIG_BLK_DEV_QD65XX) += qd65xx.o +obj-$(CONFIG_BLK_DEV_4DRIVES) += ide-4drives.o + +obj-$(CONFIG_BLK_DEV_GAYLE) += gayle.o +obj-$(CONFIG_BLK_DEV_FALCON_IDE) += falconide.o +obj-$(CONFIG_BLK_DEV_MAC_IDE) += macide.o +obj-$(CONFIG_BLK_DEV_Q40IDE) += q40ide.o +obj-$(CONFIG_BLK_DEV_BUDDHA) += buddha.o + +obj-$(CONFIG_BLK_DEV_AEC62XX) += aec62xx.o +obj-$(CONFIG_BLK_DEV_ALI15X3) += alim15x3.o +obj-$(CONFIG_BLK_DEV_AMD74XX) += amd74xx.o +obj-$(CONFIG_BLK_DEV_ATIIXP) += atiixp.o +obj-$(CONFIG_BLK_DEV_CELLEB) += scc_pata.o +obj-$(CONFIG_BLK_DEV_CMD64X) += cmd64x.o +obj-$(CONFIG_BLK_DEV_CS5520) += cs5520.o +obj-$(CONFIG_BLK_DEV_CS5530) += cs5530.o +obj-$(CONFIG_BLK_DEV_CS5535) += cs5535.o +obj-$(CONFIG_BLK_DEV_SC1200) += sc1200.o +obj-$(CONFIG_BLK_DEV_CY82C693) += cy82c693.o +obj-$(CONFIG_BLK_DEV_DELKIN) += delkin_cb.o +obj-$(CONFIG_BLK_DEV_HPT366) += hpt366.o +obj-$(CONFIG_BLK_DEV_IT8213) += it8213.o +obj-$(CONFIG_BLK_DEV_IT821X) += it821x.o +obj-$(CONFIG_BLK_DEV_JMICRON) += jmicron.o +obj-$(CONFIG_BLK_DEV_NS87415) += ns87415.o +obj-$(CONFIG_BLK_DEV_OPTI621) += opti621.o +obj-$(CONFIG_BLK_DEV_PDC202XX_OLD) += pdc202xx_old.o +obj-$(CONFIG_BLK_DEV_PDC202XX_NEW) += pdc202xx_new.o +obj-$(CONFIG_BLK_DEV_PIIX) += piix.o +obj-$(CONFIG_BLK_DEV_RZ1000) += rz1000.o +obj-$(CONFIG_BLK_DEV_SVWKS) += serverworks.o +obj-$(CONFIG_BLK_DEV_SGIIOC4) += sgiioc4.o +obj-$(CONFIG_BLK_DEV_SIIMAGE) += siimage.o +obj-$(CONFIG_BLK_DEV_SIS5513) += sis5513.o +obj-$(CONFIG_BLK_DEV_SL82C105) += sl82c105.o +obj-$(CONFIG_BLK_DEV_SLC90E66) += slc90e66.o +obj-$(CONFIG_BLK_DEV_TC86C001) += tc86c001.o +obj-$(CONFIG_BLK_DEV_TRIFLEX) += triflex.o +obj-$(CONFIG_BLK_DEV_TRM290) += trm290.o +obj-$(CONFIG_BLK_DEV_VIA82CXXX) += via82cxxx.o + +# Must appear at the end of the block +obj-$(CONFIG_BLK_DEV_GENERIC) += ide-pci-generic.o +ide-pci-generic-y += generic.o obj-$(CONFIG_IDEPCI_PCIBUS_ORDER) += ide-scan-pci.o -ifeq ($(CONFIG_BLK_DEV_CMD640), y) - cmd640-core-y += pci/cmd640.o - obj-y += cmd640-core.o -endif +obj-$(CONFIG_BLK_DEV_CMD640) += cmd640.o + +obj-$(CONFIG_BLK_DEV_IDE_PMAC) += pmac.o + +obj-$(CONFIG_IDE_H8300) += ide-h8300.o -obj-$(CONFIG_IDE) += ppc/ -obj-$(CONFIG_IDE_H8300) += h8300/ obj-$(CONFIG_IDE_GENERIC) += ide-generic.o obj-$(CONFIG_BLK_DEV_IDEPNP) += ide-pnp.o @@ -58,14 +102,12 @@ obj-$(CONFIG_IDE_GD) += ide-gd_mod.o obj-$(CONFIG_BLK_DEV_IDECD) += ide-cd_mod.o obj-$(CONFIG_BLK_DEV_IDETAPE) += ide-tape.o -ifeq ($(CONFIG_BLK_DEV_IDECS), y) - ide-cs-core-y += legacy/ide-cs.o - obj-y += ide-cs-core.o -endif +obj-$(CONFIG_BLK_DEV_IDECS) += ide-cs.o -ifeq ($(CONFIG_BLK_DEV_PLATFORM), y) - ide-platform-core-y += legacy/ide_platform.o - obj-y += ide-platform-core.o -endif +obj-$(CONFIG_BLK_DEV_PLATFORM) += ide_platform.o + +obj-$(CONFIG_BLK_DEV_IDE_ICSIDE) += icside.o +obj-$(CONFIG_BLK_DEV_IDE_RAPIDE) += rapide.o +obj-$(CONFIG_BLK_DEV_PALMCHIP_BK3710) += palm_bk3710.o -obj-$(CONFIG_IDE) += arm/ mips/ +obj-$(CONFIG_BLK_DEV_IDE_AU1XXX) += au1xxx-ide.o diff --git a/drivers/ide/pci/aec62xx.c b/drivers/ide/aec62xx.c index 4142c698e0d3..4142c698e0d3 100644 --- a/drivers/ide/pci/aec62xx.c +++ b/drivers/ide/aec62xx.c diff --git a/drivers/ide/legacy/ali14xx.c b/drivers/ide/ali14xx.c index 90da1f953ed0..90da1f953ed0 100644 --- a/drivers/ide/legacy/ali14xx.c +++ b/drivers/ide/ali14xx.c diff --git a/drivers/ide/pci/alim15x3.c b/drivers/ide/alim15x3.c index daf9dce39e52..daf9dce39e52 100644 --- a/drivers/ide/pci/alim15x3.c +++ b/drivers/ide/alim15x3.c diff --git a/drivers/ide/pci/amd74xx.c b/drivers/ide/amd74xx.c index 81ec73134eda..81ec73134eda 100644 --- a/drivers/ide/pci/amd74xx.c +++ b/drivers/ide/amd74xx.c diff --git a/drivers/ide/arm/Makefile b/drivers/ide/arm/Makefile deleted file mode 100644 index 5bc26053afa6..000000000000 --- a/drivers/ide/arm/Makefile +++ /dev/null @@ -1,10 +0,0 @@ - -obj-$(CONFIG_BLK_DEV_IDE_ICSIDE) += icside.o -obj-$(CONFIG_BLK_DEV_IDE_RAPIDE) += rapide.o -obj-$(CONFIG_BLK_DEV_PALMCHIP_BK3710) += palm_bk3710.o - -ifeq ($(CONFIG_IDE_ARM), m) - obj-m += ide_arm.o -endif - -EXTRA_CFLAGS := -Idrivers/ide diff --git a/drivers/ide/pci/atiixp.c b/drivers/ide/atiixp.c index b2735d28f5cc..b2735d28f5cc 100644 --- a/drivers/ide/pci/atiixp.c +++ b/drivers/ide/atiixp.c diff --git a/drivers/ide/mips/au1xxx-ide.c b/drivers/ide/au1xxx-ide.c index 0ec8fd1e4dcb..0ec8fd1e4dcb 100644 --- a/drivers/ide/mips/au1xxx-ide.c +++ b/drivers/ide/au1xxx-ide.c diff --git a/drivers/ide/legacy/buddha.c b/drivers/ide/buddha.c index c5a3c9ef6a5d..c5a3c9ef6a5d 100644 --- a/drivers/ide/legacy/buddha.c +++ b/drivers/ide/buddha.c diff --git a/drivers/ide/pci/cmd640.c b/drivers/ide/cmd640.c index e4306647d00d..e4306647d00d 100644 --- a/drivers/ide/pci/cmd640.c +++ b/drivers/ide/cmd640.c diff --git a/drivers/ide/pci/cmd64x.c b/drivers/ide/cmd64x.c index 935385c77e06..935385c77e06 100644 --- a/drivers/ide/pci/cmd64x.c +++ b/drivers/ide/cmd64x.c diff --git a/drivers/ide/pci/cs5520.c b/drivers/ide/cs5520.c index 5efb467f8fa0..5efb467f8fa0 100644 --- a/drivers/ide/pci/cs5520.c +++ b/drivers/ide/cs5520.c diff --git a/drivers/ide/pci/cs5530.c b/drivers/ide/cs5530.c index 53f079cc00af..53f079cc00af 100644 --- a/drivers/ide/pci/cs5530.c +++ b/drivers/ide/cs5530.c diff --git a/drivers/ide/pci/cs5535.c b/drivers/ide/cs5535.c index 983d957a0189..983d957a0189 100644 --- a/drivers/ide/pci/cs5535.c +++ b/drivers/ide/cs5535.c diff --git a/drivers/ide/pci/cy82c693.c b/drivers/ide/cy82c693.c index 5297f07d2933..5297f07d2933 100644 --- a/drivers/ide/pci/cy82c693.c +++ b/drivers/ide/cy82c693.c diff --git a/drivers/ide/pci/delkin_cb.c b/drivers/ide/delkin_cb.c index 8f1b2d9f0513..8f1b2d9f0513 100644 --- a/drivers/ide/pci/delkin_cb.c +++ b/drivers/ide/delkin_cb.c diff --git a/drivers/ide/legacy/dtc2278.c b/drivers/ide/dtc2278.c index 689b2e493413..689b2e493413 100644 --- a/drivers/ide/legacy/dtc2278.c +++ b/drivers/ide/dtc2278.c diff --git a/drivers/ide/legacy/falconide.c b/drivers/ide/falconide.c index 39d500d84b07..39d500d84b07 100644 --- a/drivers/ide/legacy/falconide.c +++ b/drivers/ide/falconide.c diff --git a/drivers/ide/legacy/gayle.c b/drivers/ide/gayle.c index 691506886561..691506886561 100644 --- a/drivers/ide/legacy/gayle.c +++ b/drivers/ide/gayle.c diff --git a/drivers/ide/pci/generic.c b/drivers/ide/generic.c index 474f96a7c076..474f96a7c076 100644 --- a/drivers/ide/pci/generic.c +++ b/drivers/ide/generic.c diff --git a/drivers/ide/h8300/Makefile b/drivers/ide/h8300/Makefile deleted file mode 100644 index 5eba16f423f4..000000000000 --- a/drivers/ide/h8300/Makefile +++ /dev/null @@ -1,2 +0,0 @@ - -obj-$(CONFIG_IDE_H8300) += ide-h8300.o diff --git a/drivers/ide/pci/hpt366.c b/drivers/ide/hpt366.c index a7909e9c720e..a7909e9c720e 100644 --- a/drivers/ide/pci/hpt366.c +++ b/drivers/ide/hpt366.c diff --git a/drivers/ide/legacy/ht6560b.c b/drivers/ide/ht6560b.c index c7e5c2246b79..c7e5c2246b79 100644 --- a/drivers/ide/legacy/ht6560b.c +++ b/drivers/ide/ht6560b.c diff --git a/drivers/ide/arm/icside.c b/drivers/ide/icside.c index 76bdc9a27f6f..76bdc9a27f6f 100644 --- a/drivers/ide/arm/icside.c +++ b/drivers/ide/icside.c diff --git a/drivers/ide/legacy/ide-4drives.c b/drivers/ide/ide-4drives.c index 9e85b1ec9607..9e85b1ec9607 100644 --- a/drivers/ide/legacy/ide-4drives.c +++ b/drivers/ide/ide-4drives.c diff --git a/drivers/ide/legacy/ide-cs.c b/drivers/ide/ide-cs.c index cb199c815b53..cb199c815b53 100644 --- a/drivers/ide/legacy/ide-cs.c +++ b/drivers/ide/ide-cs.c diff --git a/drivers/ide/h8300/ide-h8300.c b/drivers/ide/ide-h8300.c index e2cdd2e9cdec..e2cdd2e9cdec 100644 --- a/drivers/ide/h8300/ide-h8300.c +++ b/drivers/ide/ide-h8300.c diff --git a/drivers/ide/arm/ide_arm.c b/drivers/ide/ide_arm.c index f728f2927b5a..f728f2927b5a 100644 --- a/drivers/ide/arm/ide_arm.c +++ b/drivers/ide/ide_arm.c diff --git a/drivers/ide/legacy/ide_platform.c b/drivers/ide/ide_platform.c index 051b4ab0f359..051b4ab0f359 100644 --- a/drivers/ide/legacy/ide_platform.c +++ b/drivers/ide/ide_platform.c diff --git a/drivers/ide/pci/it8213.c b/drivers/ide/it8213.c index 7c2feeb3c5ec..7c2feeb3c5ec 100644 --- a/drivers/ide/pci/it8213.c +++ b/drivers/ide/it8213.c diff --git a/drivers/ide/pci/it821x.c b/drivers/ide/it821x.c index 995e18bb3139..995e18bb3139 100644 --- a/drivers/ide/pci/it821x.c +++ b/drivers/ide/it821x.c diff --git a/drivers/ide/pci/jmicron.c b/drivers/ide/jmicron.c index 9a68433cf46d..9a68433cf46d 100644 --- a/drivers/ide/pci/jmicron.c +++ b/drivers/ide/jmicron.c diff --git a/drivers/ide/legacy/Makefile b/drivers/ide/legacy/Makefile deleted file mode 100644 index 6939329f89e8..000000000000 --- a/drivers/ide/legacy/Makefile +++ /dev/null @@ -1,25 +0,0 @@ - -# link order is important here - -obj-$(CONFIG_BLK_DEV_ALI14XX) += ali14xx.o -obj-$(CONFIG_BLK_DEV_UMC8672) += umc8672.o -obj-$(CONFIG_BLK_DEV_DTC2278) += dtc2278.o -obj-$(CONFIG_BLK_DEV_HT6560B) += ht6560b.o -obj-$(CONFIG_BLK_DEV_QD65XX) += qd65xx.o -obj-$(CONFIG_BLK_DEV_4DRIVES) += ide-4drives.o - -obj-$(CONFIG_BLK_DEV_GAYLE) += gayle.o -obj-$(CONFIG_BLK_DEV_FALCON_IDE) += falconide.o -obj-$(CONFIG_BLK_DEV_MAC_IDE) += macide.o -obj-$(CONFIG_BLK_DEV_Q40IDE) += q40ide.o -obj-$(CONFIG_BLK_DEV_BUDDHA) += buddha.o - -ifeq ($(CONFIG_BLK_DEV_IDECS), m) - obj-m += ide-cs.o -endif - -ifeq ($(CONFIG_BLK_DEV_PLATFORM), m) - obj-m += ide_platform.o -endif - -EXTRA_CFLAGS := -Idrivers/ide diff --git a/drivers/ide/legacy/macide.c b/drivers/ide/macide.c index 43f97cc1d30e..43f97cc1d30e 100644 --- a/drivers/ide/legacy/macide.c +++ b/drivers/ide/macide.c diff --git a/drivers/ide/mips/Makefile b/drivers/ide/mips/Makefile deleted file mode 100644 index 5873fa0b8769..000000000000 --- a/drivers/ide/mips/Makefile +++ /dev/null @@ -1,3 +0,0 @@ -obj-$(CONFIG_BLK_DEV_IDE_AU1XXX) += au1xxx-ide.o - -EXTRA_CFLAGS := -Idrivers/ide diff --git a/drivers/ide/pci/ns87415.c b/drivers/ide/ns87415.c index 13789060f407..13789060f407 100644 --- a/drivers/ide/pci/ns87415.c +++ b/drivers/ide/ns87415.c diff --git a/drivers/ide/pci/opti621.c b/drivers/ide/opti621.c index 6048eda3cd61..6048eda3cd61 100644 --- a/drivers/ide/pci/opti621.c +++ b/drivers/ide/opti621.c diff --git a/drivers/ide/arm/palm_bk3710.c b/drivers/ide/palm_bk3710.c index 122ed3c072fd..122ed3c072fd 100644 --- a/drivers/ide/arm/palm_bk3710.c +++ b/drivers/ide/palm_bk3710.c diff --git a/drivers/ide/pci/Makefile b/drivers/ide/pci/Makefile deleted file mode 100644 index ab44a1f5f5a9..000000000000 --- a/drivers/ide/pci/Makefile +++ /dev/null @@ -1,43 +0,0 @@ - -obj-$(CONFIG_BLK_DEV_AEC62XX) += aec62xx.o -obj-$(CONFIG_BLK_DEV_ALI15X3) += alim15x3.o -obj-$(CONFIG_BLK_DEV_AMD74XX) += amd74xx.o -obj-$(CONFIG_BLK_DEV_ATIIXP) += atiixp.o -obj-$(CONFIG_BLK_DEV_CELLEB) += scc_pata.o -obj-$(CONFIG_BLK_DEV_CMD64X) += cmd64x.o -obj-$(CONFIG_BLK_DEV_CS5520) += cs5520.o -obj-$(CONFIG_BLK_DEV_CS5530) += cs5530.o -obj-$(CONFIG_BLK_DEV_CS5535) += cs5535.o -obj-$(CONFIG_BLK_DEV_SC1200) += sc1200.o -obj-$(CONFIG_BLK_DEV_CY82C693) += cy82c693.o -obj-$(CONFIG_BLK_DEV_DELKIN) += delkin_cb.o -obj-$(CONFIG_BLK_DEV_HPT366) += hpt366.o -obj-$(CONFIG_BLK_DEV_IT8213) += it8213.o -obj-$(CONFIG_BLK_DEV_IT821X) += it821x.o -obj-$(CONFIG_BLK_DEV_JMICRON) += jmicron.o -obj-$(CONFIG_BLK_DEV_NS87415) += ns87415.o -obj-$(CONFIG_BLK_DEV_OPTI621) += opti621.o -obj-$(CONFIG_BLK_DEV_PDC202XX_OLD) += pdc202xx_old.o -obj-$(CONFIG_BLK_DEV_PDC202XX_NEW) += pdc202xx_new.o -obj-$(CONFIG_BLK_DEV_PIIX) += piix.o -obj-$(CONFIG_BLK_DEV_RZ1000) += rz1000.o -obj-$(CONFIG_BLK_DEV_SVWKS) += serverworks.o -obj-$(CONFIG_BLK_DEV_SGIIOC4) += sgiioc4.o -obj-$(CONFIG_BLK_DEV_SIIMAGE) += siimage.o -obj-$(CONFIG_BLK_DEV_SIS5513) += sis5513.o -obj-$(CONFIG_BLK_DEV_SL82C105) += sl82c105.o -obj-$(CONFIG_BLK_DEV_SLC90E66) += slc90e66.o -obj-$(CONFIG_BLK_DEV_TC86C001) += tc86c001.o -obj-$(CONFIG_BLK_DEV_TRIFLEX) += triflex.o -obj-$(CONFIG_BLK_DEV_TRM290) += trm290.o -obj-$(CONFIG_BLK_DEV_VIA82CXXX) += via82cxxx.o - -# Must appear at the end of the block -obj-$(CONFIG_BLK_DEV_GENERIC) += ide-pci-generic.o -ide-pci-generic-y += generic.o - -ifeq ($(CONFIG_BLK_DEV_CMD640), m) - obj-m += cmd640.o -endif - -EXTRA_CFLAGS := -Idrivers/ide diff --git a/drivers/ide/pci/pdc202xx_new.c b/drivers/ide/pdc202xx_new.c index 211ae46e3e0c..211ae46e3e0c 100644 --- a/drivers/ide/pci/pdc202xx_new.c +++ b/drivers/ide/pdc202xx_new.c diff --git a/drivers/ide/pci/pdc202xx_old.c b/drivers/ide/pdc202xx_old.c index 799557c25eef..799557c25eef 100644 --- a/drivers/ide/pci/pdc202xx_old.c +++ b/drivers/ide/pdc202xx_old.c diff --git a/drivers/ide/pci/piix.c b/drivers/ide/piix.c index d63f9fdca76b..d63f9fdca76b 100644 --- a/drivers/ide/pci/piix.c +++ b/drivers/ide/piix.c diff --git a/drivers/ide/ppc/pmac.c b/drivers/ide/pmac.c index 2e19d6298536..2e19d6298536 100644 --- a/drivers/ide/ppc/pmac.c +++ b/drivers/ide/pmac.c diff --git a/drivers/ide/ppc/Makefile b/drivers/ide/ppc/Makefile deleted file mode 100644 index 74e52adcdf4b..000000000000 --- a/drivers/ide/ppc/Makefile +++ /dev/null @@ -1,2 +0,0 @@ - -obj-$(CONFIG_BLK_DEV_IDE_PMAC) += pmac.o diff --git a/drivers/ide/legacy/q40ide.c b/drivers/ide/q40ide.c index 4af4a8ce4cdf..4af4a8ce4cdf 100644 --- a/drivers/ide/legacy/q40ide.c +++ b/drivers/ide/q40ide.c diff --git a/drivers/ide/legacy/qd65xx.c b/drivers/ide/qd65xx.c index bc27c7aba936..bc27c7aba936 100644 --- a/drivers/ide/legacy/qd65xx.c +++ b/drivers/ide/qd65xx.c diff --git a/drivers/ide/legacy/qd65xx.h b/drivers/ide/qd65xx.h index c83dea85e621..c83dea85e621 100644 --- a/drivers/ide/legacy/qd65xx.h +++ b/drivers/ide/qd65xx.h diff --git a/drivers/ide/arm/rapide.c b/drivers/ide/rapide.c index 78d27d9ae430..78d27d9ae430 100644 --- a/drivers/ide/arm/rapide.c +++ b/drivers/ide/rapide.c diff --git a/drivers/ide/pci/rz1000.c b/drivers/ide/rz1000.c index 7daf0135cbac..7daf0135cbac 100644 --- a/drivers/ide/pci/rz1000.c +++ b/drivers/ide/rz1000.c diff --git a/drivers/ide/pci/sc1200.c b/drivers/ide/sc1200.c index f1a8758e3a99..f1a8758e3a99 100644 --- a/drivers/ide/pci/sc1200.c +++ b/drivers/ide/sc1200.c diff --git a/drivers/ide/pci/scc_pata.c b/drivers/ide/scc_pata.c index 49f163aa51e3..49f163aa51e3 100644 --- a/drivers/ide/pci/scc_pata.c +++ b/drivers/ide/scc_pata.c diff --git a/drivers/ide/pci/serverworks.c b/drivers/ide/serverworks.c index 437bc919dafd..437bc919dafd 100644 --- a/drivers/ide/pci/serverworks.c +++ b/drivers/ide/serverworks.c diff --git a/drivers/ide/pci/sgiioc4.c b/drivers/ide/sgiioc4.c index 8af9b23499fd..8af9b23499fd 100644 --- a/drivers/ide/pci/sgiioc4.c +++ b/drivers/ide/sgiioc4.c diff --git a/drivers/ide/pci/siimage.c b/drivers/ide/siimage.c index eb4faf92c571..eb4faf92c571 100644 --- a/drivers/ide/pci/siimage.c +++ b/drivers/ide/siimage.c diff --git a/drivers/ide/pci/sis5513.c b/drivers/ide/sis5513.c index ad32e18c5ba3..ad32e18c5ba3 100644 --- a/drivers/ide/pci/sis5513.c +++ b/drivers/ide/sis5513.c diff --git a/drivers/ide/pci/sl82c105.c b/drivers/ide/sl82c105.c index 84dc33602ff8..84dc33602ff8 100644 --- a/drivers/ide/pci/sl82c105.c +++ b/drivers/ide/sl82c105.c diff --git a/drivers/ide/pci/slc90e66.c b/drivers/ide/slc90e66.c index 0f759e4ed779..0f759e4ed779 100644 --- a/drivers/ide/pci/slc90e66.c +++ b/drivers/ide/slc90e66.c diff --git a/drivers/ide/pci/tc86c001.c b/drivers/ide/tc86c001.c index 93e2cce4b296..93e2cce4b296 100644 --- a/drivers/ide/pci/tc86c001.c +++ b/drivers/ide/tc86c001.c diff --git a/drivers/ide/pci/triflex.c b/drivers/ide/triflex.c index b6ff40336aa9..b6ff40336aa9 100644 --- a/drivers/ide/pci/triflex.c +++ b/drivers/ide/triflex.c diff --git a/drivers/ide/pci/trm290.c b/drivers/ide/trm290.c index 75ea61526566..75ea61526566 100644 --- a/drivers/ide/pci/trm290.c +++ b/drivers/ide/trm290.c diff --git a/drivers/ide/legacy/umc8672.c b/drivers/ide/umc8672.c index 1da076e0c917..1da076e0c917 100644 --- a/drivers/ide/legacy/umc8672.c +++ b/drivers/ide/umc8672.c diff --git a/drivers/ide/pci/via82cxxx.c b/drivers/ide/via82cxxx.c index 2a812d3207e9..2a812d3207e9 100644 --- a/drivers/ide/pci/via82cxxx.c +++ b/drivers/ide/via82cxxx.c diff --git a/drivers/infiniband/core/mad.c b/drivers/infiniband/core/mad.c index 49c45feccd5b..5c54fc2350be 100644 --- a/drivers/infiniband/core/mad.c +++ b/drivers/infiniband/core/mad.c @@ -406,19 +406,15 @@ static int register_snoop_agent(struct ib_mad_qp_info *qp_info, if (i == qp_info->snoop_table_size) { /* Grow table. */ - new_snoop_table = kmalloc(sizeof mad_snoop_priv * - qp_info->snoop_table_size + 1, - GFP_ATOMIC); + new_snoop_table = krealloc(qp_info->snoop_table, + sizeof mad_snoop_priv * + (qp_info->snoop_table_size + 1), + GFP_ATOMIC); if (!new_snoop_table) { i = -ENOMEM; goto out; } - if (qp_info->snoop_table) { - memcpy(new_snoop_table, qp_info->snoop_table, - sizeof mad_snoop_priv * - qp_info->snoop_table_size); - kfree(qp_info->snoop_table); - } + qp_info->snoop_table = new_snoop_table; qp_info->snoop_table_size++; } diff --git a/drivers/infiniband/core/ucma.c b/drivers/infiniband/core/ucma.c index 3ddacf39b7ba..4346a24568fb 100644 --- a/drivers/infiniband/core/ucma.c +++ b/drivers/infiniband/core/ucma.c @@ -904,8 +904,8 @@ static ssize_t ucma_join_multicast(struct ucma_file *file, mutex_lock(&file->mut); mc = ucma_alloc_multicast(ctx); - if (IS_ERR(mc)) { - ret = PTR_ERR(mc); + if (!mc) { + ret = -ENOMEM; goto err1; } diff --git a/drivers/infiniband/hw/cxgb3/iwch_cm.c b/drivers/infiniband/hw/cxgb3/iwch_cm.c index c325c44807e8..44e936e48a31 100644 --- a/drivers/infiniband/hw/cxgb3/iwch_cm.c +++ b/drivers/infiniband/hw/cxgb3/iwch_cm.c @@ -1942,6 +1942,7 @@ fail4: fail3: cxgb3_free_atid(ep->com.tdev, ep->atid); fail2: + cm_id->rem_ref(cm_id); put_ep(&ep->com); out: return err; diff --git a/drivers/infiniband/hw/ehca/ehca_classes.h b/drivers/infiniband/hw/ehca/ehca_classes.h index 5d7b7855afb9..4df887af66a5 100644 --- a/drivers/infiniband/hw/ehca/ehca_classes.h +++ b/drivers/infiniband/hw/ehca/ehca_classes.h @@ -128,6 +128,8 @@ struct ehca_shca { /* MR pgsize: bit 0-3 means 4K, 64K, 1M, 16M respectively */ u32 hca_cap_mr_pgsize; int max_mtu; + int max_num_qps; + int max_num_cqs; atomic_t num_cqs; atomic_t num_qps; }; diff --git a/drivers/infiniband/hw/ehca/ehca_cq.c b/drivers/infiniband/hw/ehca/ehca_cq.c index 33647a95eb9a..2f4c28a30271 100644 --- a/drivers/infiniband/hw/ehca/ehca_cq.c +++ b/drivers/infiniband/hw/ehca/ehca_cq.c @@ -132,9 +132,9 @@ struct ib_cq *ehca_create_cq(struct ib_device *device, int cqe, int comp_vector, if (cqe >= 0xFFFFFFFF - 64 - additional_cqe) return ERR_PTR(-EINVAL); - if (!atomic_add_unless(&shca->num_cqs, 1, ehca_max_cq)) { + if (!atomic_add_unless(&shca->num_cqs, 1, shca->max_num_cqs)) { ehca_err(device, "Unable to create CQ, max number of %i " - "CQs reached.", ehca_max_cq); + "CQs reached.", shca->max_num_cqs); ehca_err(device, "To increase the maximum number of CQs " "use the number_of_cqs module parameter.\n"); return ERR_PTR(-ENOSPC); diff --git a/drivers/infiniband/hw/ehca/ehca_main.c b/drivers/infiniband/hw/ehca/ehca_main.c index 598844d2edc9..bb02a86aa526 100644 --- a/drivers/infiniband/hw/ehca/ehca_main.c +++ b/drivers/infiniband/hw/ehca/ehca_main.c @@ -44,6 +44,8 @@ #include <linux/slab.h> #endif +#include <linux/notifier.h> +#include <linux/memory.h> #include "ehca_classes.h" #include "ehca_iverbs.h" #include "ehca_mrmw.h" @@ -366,22 +368,23 @@ static int ehca_sense_attributes(struct ehca_shca *shca) shca->hca_cap_mr_pgsize |= pgsize_map[i + 1]; /* Set maximum number of CQs and QPs to calculate EQ size */ - if (ehca_max_qp == -1) - ehca_max_qp = min_t(int, rblock->max_qp, EHCA_MAX_NUM_QUEUES); - else if (ehca_max_qp < 1 || ehca_max_qp > rblock->max_qp) { - ehca_gen_err("Requested number of QPs is out of range (1 - %i) " - "specified by HW", rblock->max_qp); - ret = -EINVAL; - goto sense_attributes1; + if (shca->max_num_qps == -1) + shca->max_num_qps = min_t(int, rblock->max_qp, + EHCA_MAX_NUM_QUEUES); + else if (shca->max_num_qps < 1 || shca->max_num_qps > rblock->max_qp) { + ehca_gen_warn("The requested number of QPs is out of range " + "(1 - %i) specified by HW. Value is set to %i", + rblock->max_qp, rblock->max_qp); + shca->max_num_qps = rblock->max_qp; } - if (ehca_max_cq == -1) - ehca_max_cq = min_t(int, rblock->max_cq, EHCA_MAX_NUM_QUEUES); - else if (ehca_max_cq < 1 || ehca_max_cq > rblock->max_cq) { - ehca_gen_err("Requested number of CQs is out of range (1 - %i) " - "specified by HW", rblock->max_cq); - ret = -EINVAL; - goto sense_attributes1; + if (shca->max_num_cqs == -1) + shca->max_num_cqs = min_t(int, rblock->max_cq, + EHCA_MAX_NUM_QUEUES); + else if (shca->max_num_cqs < 1 || shca->max_num_cqs > rblock->max_cq) { + ehca_gen_warn("The requested number of CQs is out of range " + "(1 - %i) specified by HW. Value is set to %i", + rblock->max_cq, rblock->max_cq); } /* query max MTU from first port -- it's the same for all ports */ @@ -733,9 +736,13 @@ static int __devinit ehca_probe(struct of_device *dev, ehca_gen_err("Cannot allocate shca memory."); return -ENOMEM; } + mutex_init(&shca->modify_mutex); atomic_set(&shca->num_cqs, 0); atomic_set(&shca->num_qps, 0); + shca->max_num_qps = ehca_max_qp; + shca->max_num_cqs = ehca_max_cq; + for (i = 0; i < ARRAY_SIZE(shca->sport); i++) spin_lock_init(&shca->sport[i].mod_sqp_lock); @@ -755,7 +762,7 @@ static int __devinit ehca_probe(struct of_device *dev, goto probe1; } - eq_size = 2 * ehca_max_cq + 4 * ehca_max_qp; + eq_size = 2 * shca->max_num_cqs + 4 * shca->max_num_qps; /* create event queues */ ret = ehca_create_eq(shca, &shca->eq, EHCA_EQ, eq_size); if (ret) { @@ -964,6 +971,41 @@ void ehca_poll_eqs(unsigned long data) spin_unlock(&shca_list_lock); } +static int ehca_mem_notifier(struct notifier_block *nb, + unsigned long action, void *data) +{ + static unsigned long ehca_dmem_warn_time; + + switch (action) { + case MEM_CANCEL_OFFLINE: + case MEM_CANCEL_ONLINE: + case MEM_ONLINE: + case MEM_OFFLINE: + return NOTIFY_OK; + case MEM_GOING_ONLINE: + case MEM_GOING_OFFLINE: + /* only ok if no hca is attached to the lpar */ + spin_lock(&shca_list_lock); + if (list_empty(&shca_list)) { + spin_unlock(&shca_list_lock); + return NOTIFY_OK; + } else { + spin_unlock(&shca_list_lock); + if (printk_timed_ratelimit(&ehca_dmem_warn_time, + 30 * 1000)) + ehca_gen_err("DMEM operations are not allowed" + "as long as an ehca adapter is" + "attached to the LPAR"); + return NOTIFY_BAD; + } + } + return NOTIFY_OK; +} + +static struct notifier_block ehca_mem_nb = { + .notifier_call = ehca_mem_notifier, +}; + static int __init ehca_module_init(void) { int ret; @@ -991,6 +1033,12 @@ static int __init ehca_module_init(void) goto module_init2; } + ret = register_memory_notifier(&ehca_mem_nb); + if (ret) { + ehca_gen_err("Failed registering memory add/remove notifier"); + goto module_init3; + } + if (ehca_poll_all_eqs != 1) { ehca_gen_err("WARNING!!!"); ehca_gen_err("It is possible to lose interrupts."); @@ -1003,6 +1051,9 @@ static int __init ehca_module_init(void) return 0; +module_init3: + ibmebus_unregister_driver(&ehca_driver); + module_init2: ehca_destroy_slab_caches(); @@ -1018,6 +1069,8 @@ static void __exit ehca_module_exit(void) ibmebus_unregister_driver(&ehca_driver); + unregister_memory_notifier(&ehca_mem_nb); + ehca_destroy_slab_caches(); ehca_destroy_comp_pool(); diff --git a/drivers/infiniband/hw/ehca/ehca_qp.c b/drivers/infiniband/hw/ehca/ehca_qp.c index 4dbe2870e014..4d54b9f64567 100644 --- a/drivers/infiniband/hw/ehca/ehca_qp.c +++ b/drivers/infiniband/hw/ehca/ehca_qp.c @@ -465,9 +465,9 @@ static struct ehca_qp *internal_create_qp( u32 swqe_size = 0, rwqe_size = 0, ib_qp_num; unsigned long flags; - if (!atomic_add_unless(&shca->num_qps, 1, ehca_max_qp)) { + if (!atomic_add_unless(&shca->num_qps, 1, shca->max_num_qps)) { ehca_err(pd->device, "Unable to create QP, max number of %i " - "QPs reached.", ehca_max_qp); + "QPs reached.", shca->max_num_qps); ehca_err(pd->device, "To increase the maximum number of QPs " "use the number_of_qps module parameter.\n"); return ERR_PTR(-ENOSPC); @@ -502,6 +502,12 @@ static struct ehca_qp *internal_create_qp( if (init_attr->srq) { my_srq = container_of(init_attr->srq, struct ehca_qp, ib_srq); + if (qp_type == IB_QPT_UC) { + ehca_err(pd->device, "UC with SRQ not supported"); + atomic_dec(&shca->num_qps); + return ERR_PTR(-EINVAL); + } + has_srq = 1; parms.ext_type = EQPT_SRQBASE; parms.srq_qpn = my_srq->real_qp_num; diff --git a/drivers/infiniband/hw/mlx4/mad.c b/drivers/infiniband/hw/mlx4/mad.c index cdca3a511e1c..606f1e2ef284 100644 --- a/drivers/infiniband/hw/mlx4/mad.c +++ b/drivers/infiniband/hw/mlx4/mad.c @@ -298,7 +298,7 @@ int mlx4_ib_mad_init(struct mlx4_ib_dev *dev) int p, q; int ret; - for (p = 0; p < dev->dev->caps.num_ports; ++p) + for (p = 0; p < dev->num_ports; ++p) for (q = 0; q <= 1; ++q) { agent = ib_register_mad_agent(&dev->ib_dev, p + 1, q ? IB_QPT_GSI : IB_QPT_SMI, @@ -314,7 +314,7 @@ int mlx4_ib_mad_init(struct mlx4_ib_dev *dev) return 0; err: - for (p = 0; p < dev->dev->caps.num_ports; ++p) + for (p = 0; p < dev->num_ports; ++p) for (q = 0; q <= 1; ++q) if (dev->send_agent[p][q]) ib_unregister_mad_agent(dev->send_agent[p][q]); @@ -327,7 +327,7 @@ void mlx4_ib_mad_cleanup(struct mlx4_ib_dev *dev) struct ib_mad_agent *agent; int p, q; - for (p = 0; p < dev->dev->caps.num_ports; ++p) { + for (p = 0; p < dev->num_ports; ++p) { for (q = 0; q <= 1; ++q) { agent = dev->send_agent[p][q]; dev->send_agent[p][q] = NULL; diff --git a/drivers/infiniband/hw/mlx4/main.c b/drivers/infiniband/hw/mlx4/main.c index a3c2851c0545..2e80f8f47b02 100644 --- a/drivers/infiniband/hw/mlx4/main.c +++ b/drivers/infiniband/hw/mlx4/main.c @@ -574,7 +574,10 @@ static void *mlx4_ib_add(struct mlx4_dev *dev) ibdev->ib_dev.owner = THIS_MODULE; ibdev->ib_dev.node_type = RDMA_NODE_IB_CA; ibdev->ib_dev.local_dma_lkey = dev->caps.reserved_lkey; - ibdev->ib_dev.phys_port_cnt = dev->caps.num_ports; + ibdev->num_ports = 0; + mlx4_foreach_port(i, dev, MLX4_PORT_TYPE_IB) + ibdev->num_ports++; + ibdev->ib_dev.phys_port_cnt = ibdev->num_ports; ibdev->ib_dev.num_comp_vectors = 1; ibdev->ib_dev.dma_device = &dev->pdev->dev; @@ -691,7 +694,7 @@ static void mlx4_ib_remove(struct mlx4_dev *dev, void *ibdev_ptr) struct mlx4_ib_dev *ibdev = ibdev_ptr; int p; - for (p = 1; p <= dev->caps.num_ports; ++p) + for (p = 1; p <= ibdev->num_ports; ++p) mlx4_CLOSE_PORT(dev, p); mlx4_ib_mad_cleanup(ibdev); @@ -706,6 +709,10 @@ static void mlx4_ib_event(struct mlx4_dev *dev, void *ibdev_ptr, enum mlx4_dev_event event, int port) { struct ib_event ibev; + struct mlx4_ib_dev *ibdev = to_mdev((struct ib_device *) ibdev_ptr); + + if (port > ibdev->num_ports) + return; switch (event) { case MLX4_DEV_EVENT_PORT_UP: diff --git a/drivers/infiniband/hw/mlx4/mlx4_ib.h b/drivers/infiniband/hw/mlx4/mlx4_ib.h index 6e2b0dc21b61..9974e886b8de 100644 --- a/drivers/infiniband/hw/mlx4/mlx4_ib.h +++ b/drivers/infiniband/hw/mlx4/mlx4_ib.h @@ -162,6 +162,7 @@ struct mlx4_ib_ah { struct mlx4_ib_dev { struct ib_device ib_dev; struct mlx4_dev *dev; + int num_ports; void __iomem *uar_map; struct mlx4_uar priv_uar; diff --git a/drivers/infiniband/hw/mlx4/qp.c b/drivers/infiniband/hw/mlx4/qp.c index baa01deb2436..39167a797f99 100644 --- a/drivers/infiniband/hw/mlx4/qp.c +++ b/drivers/infiniband/hw/mlx4/qp.c @@ -451,6 +451,7 @@ static int create_qp_common(struct mlx4_ib_dev *dev, struct ib_pd *pd, struct ib_qp_init_attr *init_attr, struct ib_udata *udata, int sqpn, struct mlx4_ib_qp *qp) { + int qpn; int err; mutex_init(&qp->mutex); @@ -545,9 +546,17 @@ static int create_qp_common(struct mlx4_ib_dev *dev, struct ib_pd *pd, } } - err = mlx4_qp_alloc(dev->dev, sqpn, &qp->mqp); + if (sqpn) { + qpn = sqpn; + } else { + err = mlx4_qp_reserve_range(dev->dev, 1, 1, &qpn); + if (err) + goto err_wrid; + } + + err = mlx4_qp_alloc(dev->dev, qpn, &qp->mqp); if (err) - goto err_wrid; + goto err_qpn; /* * Hardware wants QPN written in big-endian order (after @@ -560,6 +569,10 @@ static int create_qp_common(struct mlx4_ib_dev *dev, struct ib_pd *pd, return 0; +err_qpn: + if (!sqpn) + mlx4_qp_release_range(dev->dev, qpn, 1); + err_wrid: if (pd->uobject) { if (!init_attr->srq) @@ -655,6 +668,10 @@ static void destroy_qp_common(struct mlx4_ib_dev *dev, struct mlx4_ib_qp *qp, mlx4_ib_unlock_cqs(send_cq, recv_cq); mlx4_qp_free(dev->dev, &qp->mqp); + + if (!is_sqp(dev, qp)) + mlx4_qp_release_range(dev->dev, qp->mqp.qpn, 1); + mlx4_mtt_cleanup(dev->dev, &qp->mtt); if (is_user) { diff --git a/drivers/infiniband/ulp/ipoib/ipoib.h b/drivers/infiniband/ulp/ipoib/ipoib.h index 68ba5c3482e4..e0c7dfabf2b4 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib.h +++ b/drivers/infiniband/ulp/ipoib/ipoib.h @@ -507,6 +507,7 @@ int ipoib_pkey_dev_delay_open(struct net_device *dev); void ipoib_drain_cq(struct net_device *dev); void ipoib_set_ethtool_ops(struct net_device *dev); +int ipoib_set_dev_features(struct ipoib_dev_priv *priv, struct ib_device *hca); #ifdef CONFIG_INFINIBAND_IPOIB_CM diff --git a/drivers/infiniband/ulp/ipoib/ipoib_ethtool.c b/drivers/infiniband/ulp/ipoib/ipoib_ethtool.c index 66af5c1a76e5..e9795f60e5d6 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_ethtool.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_ethtool.c @@ -42,6 +42,13 @@ static void ipoib_get_drvinfo(struct net_device *netdev, strncpy(drvinfo->driver, "ipoib", sizeof(drvinfo->driver) - 1); } +static u32 ipoib_get_rx_csum(struct net_device *dev) +{ + struct ipoib_dev_priv *priv = netdev_priv(dev); + return test_bit(IPOIB_FLAG_CSUM, &priv->flags) && + !test_bit(IPOIB_FLAG_ADMIN_CM, &priv->flags); +} + static int ipoib_get_coalesce(struct net_device *dev, struct ethtool_coalesce *coal) { @@ -129,7 +136,7 @@ static void ipoib_get_ethtool_stats(struct net_device *dev, static const struct ethtool_ops ipoib_ethtool_ops = { .get_drvinfo = ipoib_get_drvinfo, - .get_tso = ethtool_op_get_tso, + .get_rx_csum = ipoib_get_rx_csum, .get_coalesce = ipoib_get_coalesce, .set_coalesce = ipoib_set_coalesce, .get_flags = ethtool_op_get_flags, diff --git a/drivers/infiniband/ulp/ipoib/ipoib_ib.c b/drivers/infiniband/ulp/ipoib/ipoib_ib.c index 0e748aeeae99..28eb6f03c588 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_ib.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_ib.c @@ -685,10 +685,6 @@ int ipoib_ib_dev_open(struct net_device *dev) queue_delayed_work(ipoib_workqueue, &priv->ah_reap_task, round_jiffies_relative(HZ)); - init_timer(&priv->poll_timer); - priv->poll_timer.function = ipoib_ib_tx_timer_func; - priv->poll_timer.data = (unsigned long)dev; - set_bit(IPOIB_FLAG_INITIALIZED, &priv->flags); return 0; @@ -906,6 +902,9 @@ int ipoib_ib_dev_init(struct net_device *dev, struct ib_device *ca, int port) return -ENODEV; } + setup_timer(&priv->poll_timer, ipoib_ib_tx_timer_func, + (unsigned long) dev); + if (dev->flags & IFF_UP) { if (ipoib_ib_dev_open(dev)) { ipoib_transport_dev_cleanup(dev); diff --git a/drivers/infiniband/ulp/ipoib/ipoib_main.c b/drivers/infiniband/ulp/ipoib/ipoib_main.c index c0ee514396df..fddded7900d1 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_main.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_main.c @@ -1173,11 +1173,48 @@ int ipoib_add_pkey_attr(struct net_device *dev) return device_create_file(&dev->dev, &dev_attr_pkey); } +int ipoib_set_dev_features(struct ipoib_dev_priv *priv, struct ib_device *hca) +{ + struct ib_device_attr *device_attr; + int result = -ENOMEM; + + device_attr = kmalloc(sizeof *device_attr, GFP_KERNEL); + if (!device_attr) { + printk(KERN_WARNING "%s: allocation of %zu bytes failed\n", + hca->name, sizeof *device_attr); + return result; + } + + result = ib_query_device(hca, device_attr); + if (result) { + printk(KERN_WARNING "%s: ib_query_device failed (ret = %d)\n", + hca->name, result); + kfree(device_attr); + return result; + } + priv->hca_caps = device_attr->device_cap_flags; + + kfree(device_attr); + + if (priv->hca_caps & IB_DEVICE_UD_IP_CSUM) { + set_bit(IPOIB_FLAG_CSUM, &priv->flags); + priv->dev->features |= NETIF_F_SG | NETIF_F_IP_CSUM; + } + + if (lro) + priv->dev->features |= NETIF_F_LRO; + + if (priv->dev->features & NETIF_F_SG && priv->hca_caps & IB_DEVICE_UD_TSO) + priv->dev->features |= NETIF_F_TSO; + + return 0; +} + + static struct net_device *ipoib_add_port(const char *format, struct ib_device *hca, u8 port) { struct ipoib_dev_priv *priv; - struct ib_device_attr *device_attr; struct ib_port_attr attr; int result = -ENOMEM; @@ -1206,31 +1243,8 @@ static struct net_device *ipoib_add_port(const char *format, goto device_init_failed; } - device_attr = kmalloc(sizeof *device_attr, GFP_KERNEL); - if (!device_attr) { - printk(KERN_WARNING "%s: allocation of %zu bytes failed\n", - hca->name, sizeof *device_attr); + if (ipoib_set_dev_features(priv, hca)) goto device_init_failed; - } - - result = ib_query_device(hca, device_attr); - if (result) { - printk(KERN_WARNING "%s: ib_query_device failed (ret = %d)\n", - hca->name, result); - kfree(device_attr); - goto device_init_failed; - } - priv->hca_caps = device_attr->device_cap_flags; - - kfree(device_attr); - - if (priv->hca_caps & IB_DEVICE_UD_IP_CSUM) { - set_bit(IPOIB_FLAG_CSUM, &priv->flags); - priv->dev->features |= NETIF_F_SG | NETIF_F_IP_CSUM; - } - - if (lro) - priv->dev->features |= NETIF_F_LRO; /* * Set the full membership bit, so that we join the right @@ -1266,9 +1280,6 @@ static struct net_device *ipoib_add_port(const char *format, goto event_failed; } - if (priv->dev->features & NETIF_F_SG && priv->hca_caps & IB_DEVICE_UD_TSO) - priv->dev->features |= NETIF_F_TSO; - result = register_netdev(priv->dev); if (result) { printk(KERN_WARNING "%s: couldn't register ipoib port %d; error %d\n", diff --git a/drivers/infiniband/ulp/ipoib/ipoib_vlan.c b/drivers/infiniband/ulp/ipoib/ipoib_vlan.c index b08eb56196d3..2cf1a4088718 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_vlan.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_vlan.c @@ -93,6 +93,10 @@ int ipoib_vlan_add(struct net_device *pdev, unsigned short pkey) priv->mcast_mtu = priv->admin_mtu = priv->dev->mtu; set_bit(IPOIB_FLAG_SUBINTERFACE, &priv->flags); + result = ipoib_set_dev_features(priv, ppriv->ca); + if (result) + goto device_init_failed; + priv->pkey = pkey; memcpy(priv->dev->dev_addr, ppriv->dev->dev_addr, INFINIBAND_ALEN); diff --git a/drivers/md/Makefile b/drivers/md/Makefile index f1ef33dfd8cf..1c615804ea76 100644 --- a/drivers/md/Makefile +++ b/drivers/md/Makefile @@ -34,7 +34,7 @@ obj-$(CONFIG_DM_CRYPT) += dm-crypt.o obj-$(CONFIG_DM_DELAY) += dm-delay.o obj-$(CONFIG_DM_MULTIPATH) += dm-multipath.o dm-round-robin.o obj-$(CONFIG_DM_SNAPSHOT) += dm-snapshot.o -obj-$(CONFIG_DM_MIRROR) += dm-mirror.o dm-log.o +obj-$(CONFIG_DM_MIRROR) += dm-mirror.o dm-log.o dm-region-hash.o obj-$(CONFIG_DM_ZERO) += dm-zero.o quiet_cmd_unroll = UNROLL $@ diff --git a/drivers/md/dm-crypt.c b/drivers/md/dm-crypt.c index 682ef9e6acd3..ce26c84af064 100644 --- a/drivers/md/dm-crypt.c +++ b/drivers/md/dm-crypt.c @@ -23,7 +23,7 @@ #include <asm/page.h> #include <asm/unaligned.h> -#include "dm.h" +#include <linux/device-mapper.h> #define DM_MSG_PREFIX "crypt" #define MESG_STR(x) x, sizeof(x) @@ -56,6 +56,7 @@ struct dm_crypt_io { atomic_t pending; int error; sector_t sector; + struct dm_crypt_io *base_io; }; struct dm_crypt_request { @@ -93,7 +94,6 @@ struct crypt_config { struct workqueue_struct *io_queue; struct workqueue_struct *crypt_queue; - wait_queue_head_t writeq; /* * crypto related data @@ -534,6 +534,7 @@ static struct dm_crypt_io *crypt_io_alloc(struct dm_target *ti, io->base_bio = bio; io->sector = sector; io->error = 0; + io->base_io = NULL; atomic_set(&io->pending, 0); return io; @@ -547,6 +548,7 @@ static void crypt_inc_pending(struct dm_crypt_io *io) /* * One of the bios was finished. Check for completion of * the whole request and correctly clean up the buffer. + * If base_io is set, wait for the last fragment to complete. */ static void crypt_dec_pending(struct dm_crypt_io *io) { @@ -555,7 +557,14 @@ static void crypt_dec_pending(struct dm_crypt_io *io) if (!atomic_dec_and_test(&io->pending)) return; - bio_endio(io->base_bio, io->error); + if (likely(!io->base_io)) + bio_endio(io->base_bio, io->error); + else { + if (io->error && !io->base_io->error) + io->base_io->error = io->error; + crypt_dec_pending(io->base_io); + } + mempool_free(io, cc->io_pool); } @@ -646,10 +655,7 @@ static void kcryptd_io_read(struct dm_crypt_io *io) static void kcryptd_io_write(struct dm_crypt_io *io) { struct bio *clone = io->ctx.bio_out; - struct crypt_config *cc = io->target->private; - generic_make_request(clone); - wake_up(&cc->writeq); } static void kcryptd_io(struct work_struct *work) @@ -688,7 +694,6 @@ static void kcryptd_crypt_write_io_submit(struct dm_crypt_io *io, BUG_ON(io->ctx.idx_out < clone->bi_vcnt); clone->bi_sector = cc->start + io->sector; - io->sector += bio_sectors(clone); if (async) kcryptd_queue_io(io); @@ -700,16 +705,18 @@ static void kcryptd_crypt_write_convert(struct dm_crypt_io *io) { struct crypt_config *cc = io->target->private; struct bio *clone; + struct dm_crypt_io *new_io; int crypt_finished; unsigned out_of_pages = 0; unsigned remaining = io->base_bio->bi_size; + sector_t sector = io->sector; int r; /* * Prevent io from disappearing until this function completes. */ crypt_inc_pending(io); - crypt_convert_init(cc, &io->ctx, NULL, io->base_bio, io->sector); + crypt_convert_init(cc, &io->ctx, NULL, io->base_bio, sector); /* * The allocated buffers can be smaller than the whole bio, @@ -726,6 +733,7 @@ static void kcryptd_crypt_write_convert(struct dm_crypt_io *io) io->ctx.idx_out = 0; remaining -= clone->bi_size; + sector += bio_sectors(clone); crypt_inc_pending(io); r = crypt_convert(cc, &io->ctx); @@ -741,6 +749,8 @@ static void kcryptd_crypt_write_convert(struct dm_crypt_io *io) */ if (unlikely(r < 0)) break; + + io->sector = sector; } /* @@ -750,8 +760,33 @@ static void kcryptd_crypt_write_convert(struct dm_crypt_io *io) if (unlikely(out_of_pages)) congestion_wait(WRITE, HZ/100); - if (unlikely(remaining)) - wait_event(cc->writeq, !atomic_read(&io->ctx.pending)); + /* + * With async crypto it is unsafe to share the crypto context + * between fragments, so switch to a new dm_crypt_io structure. + */ + if (unlikely(!crypt_finished && remaining)) { + new_io = crypt_io_alloc(io->target, io->base_bio, + sector); + crypt_inc_pending(new_io); + crypt_convert_init(cc, &new_io->ctx, NULL, + io->base_bio, sector); + new_io->ctx.idx_in = io->ctx.idx_in; + new_io->ctx.offset_in = io->ctx.offset_in; + + /* + * Fragments after the first use the base_io + * pending count. + */ + if (!io->base_io) + new_io->base_io = io; + else { + new_io->base_io = io->base_io; + crypt_inc_pending(io->base_io); + crypt_dec_pending(io); + } + + io = new_io; + } } crypt_dec_pending(io); @@ -1078,7 +1113,6 @@ static int crypt_ctr(struct dm_target *ti, unsigned int argc, char **argv) goto bad_crypt_queue; } - init_waitqueue_head(&cc->writeq); ti->private = cc; return 0; diff --git a/drivers/md/dm-delay.c b/drivers/md/dm-delay.c index bdd37f881c42..848b381f1173 100644 --- a/drivers/md/dm-delay.c +++ b/drivers/md/dm-delay.c @@ -13,7 +13,8 @@ #include <linux/bio.h> #include <linux/slab.h> -#include "dm.h" +#include <linux/device-mapper.h> + #include "dm-bio-list.h" #define DM_MSG_PREFIX "delay" diff --git a/drivers/md/dm-exception-store.c b/drivers/md/dm-exception-store.c index 769ab677f8e0..01590f3e0009 100644 --- a/drivers/md/dm-exception-store.c +++ b/drivers/md/dm-exception-store.c @@ -7,7 +7,6 @@ * This file is released under the GPL. */ -#include "dm.h" #include "dm-snap.h" #include <linux/mm.h> @@ -105,6 +104,11 @@ struct pstore { void *area; /* + * An area of zeros used to clear the next area. + */ + void *zero_area; + + /* * Used to keep track of which metadata area the data in * 'chunk' refers to. */ @@ -149,6 +153,13 @@ static int alloc_area(struct pstore *ps) if (!ps->area) return r; + ps->zero_area = vmalloc(len); + if (!ps->zero_area) { + vfree(ps->area); + return r; + } + memset(ps->zero_area, 0, len); + return 0; } @@ -156,6 +167,8 @@ static void free_area(struct pstore *ps) { vfree(ps->area); ps->area = NULL; + vfree(ps->zero_area); + ps->zero_area = NULL; } struct mdata_req { @@ -220,25 +233,41 @@ static chunk_t area_location(struct pstore *ps, chunk_t area) * Read or write a metadata area. Remembering to skip the first * chunk which holds the header. */ -static int area_io(struct pstore *ps, chunk_t area, int rw) +static int area_io(struct pstore *ps, int rw) { int r; chunk_t chunk; - chunk = area_location(ps, area); + chunk = area_location(ps, ps->current_area); r = chunk_io(ps, chunk, rw, 0); if (r) return r; - ps->current_area = area; return 0; } -static int zero_area(struct pstore *ps, chunk_t area) +static void zero_memory_area(struct pstore *ps) { memset(ps->area, 0, ps->snap->chunk_size << SECTOR_SHIFT); - return area_io(ps, area, WRITE); +} + +static int zero_disk_area(struct pstore *ps, chunk_t area) +{ + struct dm_io_region where = { + .bdev = ps->snap->cow->bdev, + .sector = ps->snap->chunk_size * area_location(ps, area), + .count = ps->snap->chunk_size, + }; + struct dm_io_request io_req = { + .bi_rw = WRITE, + .mem.type = DM_IO_VMA, + .mem.ptr.vma = ps->zero_area, + .client = ps->io_client, + .notify.fn = NULL, + }; + + return dm_io(&io_req, 1, &where, NULL); } static int read_header(struct pstore *ps, int *new_snapshot) @@ -411,15 +440,14 @@ static int insert_exceptions(struct pstore *ps, int *full) static int read_exceptions(struct pstore *ps) { - chunk_t area; int r, full = 1; /* * Keeping reading chunks and inserting exceptions until * we find a partially full area. */ - for (area = 0; full; area++) { - r = area_io(ps, area, READ); + for (ps->current_area = 0; full; ps->current_area++) { + r = area_io(ps, READ); if (r) return r; @@ -428,6 +456,8 @@ static int read_exceptions(struct pstore *ps) return r; } + ps->current_area--; + return 0; } @@ -486,12 +516,13 @@ static int persistent_read_metadata(struct exception_store *store) return r; } - r = zero_area(ps, 0); + ps->current_area = 0; + zero_memory_area(ps); + r = zero_disk_area(ps, 0); if (r) { - DMWARN("zero_area(0) failed"); + DMWARN("zero_disk_area(0) failed"); return r; } - } else { /* * Sanity checks. @@ -551,7 +582,6 @@ static void persistent_commit(struct exception_store *store, void (*callback) (void *, int success), void *callback_context) { - int r; unsigned int i; struct pstore *ps = get_info(store); struct disk_exception de; @@ -572,33 +602,41 @@ static void persistent_commit(struct exception_store *store, cb->context = callback_context; /* - * If there are no more exceptions in flight, or we have - * filled this metadata area we commit the exceptions to - * disk. + * If there are exceptions in flight and we have not yet + * filled this metadata area there's nothing more to do. */ - if (atomic_dec_and_test(&ps->pending_count) || - (ps->current_committed == ps->exceptions_per_area)) { - r = area_io(ps, ps->current_area, WRITE); - if (r) - ps->valid = 0; + if (!atomic_dec_and_test(&ps->pending_count) && + (ps->current_committed != ps->exceptions_per_area)) + return; - /* - * Have we completely filled the current area ? - */ - if (ps->current_committed == ps->exceptions_per_area) { - ps->current_committed = 0; - r = zero_area(ps, ps->current_area + 1); - if (r) - ps->valid = 0; - } + /* + * If we completely filled the current area, then wipe the next one. + */ + if ((ps->current_committed == ps->exceptions_per_area) && + zero_disk_area(ps, ps->current_area + 1)) + ps->valid = 0; - for (i = 0; i < ps->callback_count; i++) { - cb = ps->callbacks + i; - cb->callback(cb->context, r == 0 ? 1 : 0); - } + /* + * Commit exceptions to disk. + */ + if (ps->valid && area_io(ps, WRITE)) + ps->valid = 0; - ps->callback_count = 0; + /* + * Advance to the next area if this one is full. + */ + if (ps->current_committed == ps->exceptions_per_area) { + ps->current_committed = 0; + ps->current_area++; + zero_memory_area(ps); } + + for (i = 0; i < ps->callback_count; i++) { + cb = ps->callbacks + i; + cb->callback(cb->context, ps->valid); + } + + ps->callback_count = 0; } static void persistent_drop(struct exception_store *store) diff --git a/drivers/md/dm-io.c b/drivers/md/dm-io.c index 4789c42d9a3a..2fd6d4450637 100644 --- a/drivers/md/dm-io.c +++ b/drivers/md/dm-io.c @@ -5,7 +5,7 @@ * This file is released under the GPL. */ -#include "dm.h" +#include <linux/device-mapper.h> #include <linux/bio.h> #include <linux/mempool.h> diff --git a/drivers/md/dm-kcopyd.c b/drivers/md/dm-kcopyd.c index 996802b8a452..3073618269ea 100644 --- a/drivers/md/dm-kcopyd.c +++ b/drivers/md/dm-kcopyd.c @@ -22,6 +22,7 @@ #include <linux/vmalloc.h> #include <linux/workqueue.h> #include <linux/mutex.h> +#include <linux/device-mapper.h> #include <linux/dm-kcopyd.h> #include "dm.h" @@ -268,6 +269,17 @@ static void push(struct list_head *jobs, struct kcopyd_job *job) spin_unlock_irqrestore(&kc->job_lock, flags); } + +static void push_head(struct list_head *jobs, struct kcopyd_job *job) +{ + unsigned long flags; + struct dm_kcopyd_client *kc = job->kc; + + spin_lock_irqsave(&kc->job_lock, flags); + list_add(&job->list, jobs); + spin_unlock_irqrestore(&kc->job_lock, flags); +} + /* * These three functions process 1 item from the corresponding * job list. @@ -398,7 +410,7 @@ static int process_jobs(struct list_head *jobs, struct dm_kcopyd_client *kc, * We couldn't service this job ATM, so * push this job back onto the list. */ - push(jobs, job); + push_head(jobs, job); break; } diff --git a/drivers/md/dm-linear.c b/drivers/md/dm-linear.c index 6449bcdf84ca..1b29e9136758 100644 --- a/drivers/md/dm-linear.c +++ b/drivers/md/dm-linear.c @@ -5,12 +5,12 @@ */ #include "dm.h" - #include <linux/module.h> #include <linux/init.h> #include <linux/blkdev.h> #include <linux/bio.h> #include <linux/slab.h> +#include <linux/device-mapper.h> #define DM_MSG_PREFIX "linear" diff --git a/drivers/md/dm-log.c b/drivers/md/dm-log.c index 5b48478c79f5..a8c0fc79ca78 100644 --- a/drivers/md/dm-log.c +++ b/drivers/md/dm-log.c @@ -12,7 +12,7 @@ #include <linux/dm-io.h> #include <linux/dm-dirty-log.h> -#include "dm.h" +#include <linux/device-mapper.h> #define DM_MSG_PREFIX "dirty region log" diff --git a/drivers/md/dm-mpath.c b/drivers/md/dm-mpath.c index 9bf3460c5540..abf6e8cfaedb 100644 --- a/drivers/md/dm-mpath.c +++ b/drivers/md/dm-mpath.c @@ -5,7 +5,8 @@ * This file is released under the GPL. */ -#include "dm.h" +#include <linux/device-mapper.h> + #include "dm-path-selector.h" #include "dm-bio-list.h" #include "dm-bio-record.h" diff --git a/drivers/md/dm-path-selector.c b/drivers/md/dm-path-selector.c index ca1bb636a3e4..96ea226155b1 100644 --- a/drivers/md/dm-path-selector.c +++ b/drivers/md/dm-path-selector.c @@ -9,7 +9,8 @@ * Path selector registration. */ -#include "dm.h" +#include <linux/device-mapper.h> + #include "dm-path-selector.h" #include <linux/slab.h> diff --git a/drivers/md/dm-raid1.c b/drivers/md/dm-raid1.c index 29913e42c4ab..92dcc06832a4 100644 --- a/drivers/md/dm-raid1.c +++ b/drivers/md/dm-raid1.c @@ -1,30 +1,30 @@ /* * Copyright (C) 2003 Sistina Software Limited. + * Copyright (C) 2005-2008 Red Hat, Inc. All rights reserved. * * This file is released under the GPL. */ -#include "dm.h" #include "dm-bio-list.h" #include "dm-bio-record.h" -#include <linux/ctype.h> #include <linux/init.h> #include <linux/mempool.h> #include <linux/module.h> #include <linux/pagemap.h> #include <linux/slab.h> -#include <linux/time.h> -#include <linux/vmalloc.h> #include <linux/workqueue.h> -#include <linux/log2.h> -#include <linux/hardirq.h> +#include <linux/device-mapper.h> #include <linux/dm-io.h> #include <linux/dm-dirty-log.h> #include <linux/dm-kcopyd.h> +#include <linux/dm-region-hash.h> #define DM_MSG_PREFIX "raid1" + +#define MAX_RECOVERY 1 /* Maximum number of regions recovered in parallel. */ #define DM_IO_PAGES 64 +#define DM_KCOPYD_PAGES 64 #define DM_RAID1_HANDLE_ERRORS 0x01 #define errors_handled(p) ((p)->features & DM_RAID1_HANDLE_ERRORS) @@ -32,87 +32,6 @@ static DECLARE_WAIT_QUEUE_HEAD(_kmirrord_recovery_stopped); /*----------------------------------------------------------------- - * Region hash - * - * The mirror splits itself up into discrete regions. Each - * region can be in one of three states: clean, dirty, - * nosync. There is no need to put clean regions in the hash. - * - * In addition to being present in the hash table a region _may_ - * be present on one of three lists. - * - * clean_regions: Regions on this list have no io pending to - * them, they are in sync, we are no longer interested in them, - * they are dull. rh_update_states() will remove them from the - * hash table. - * - * quiesced_regions: These regions have been spun down, ready - * for recovery. rh_recovery_start() will remove regions from - * this list and hand them to kmirrord, which will schedule the - * recovery io with kcopyd. - * - * recovered_regions: Regions that kcopyd has successfully - * recovered. rh_update_states() will now schedule any delayed - * io, up the recovery_count, and remove the region from the - * hash. - * - * There are 2 locks: - * A rw spin lock 'hash_lock' protects just the hash table, - * this is never held in write mode from interrupt context, - * which I believe means that we only have to disable irqs when - * doing a write lock. - * - * An ordinary spin lock 'region_lock' that protects the three - * lists in the region_hash, with the 'state', 'list' and - * 'bhs_delayed' fields of the regions. This is used from irq - * context, so all other uses will have to suspend local irqs. - *---------------------------------------------------------------*/ -struct mirror_set; -struct region_hash { - struct mirror_set *ms; - uint32_t region_size; - unsigned region_shift; - - /* holds persistent region state */ - struct dm_dirty_log *log; - - /* hash table */ - rwlock_t hash_lock; - mempool_t *region_pool; - unsigned int mask; - unsigned int nr_buckets; - struct list_head *buckets; - - spinlock_t region_lock; - atomic_t recovery_in_flight; - struct semaphore recovery_count; - struct list_head clean_regions; - struct list_head quiesced_regions; - struct list_head recovered_regions; - struct list_head failed_recovered_regions; -}; - -enum { - RH_CLEAN, - RH_DIRTY, - RH_NOSYNC, - RH_RECOVERING -}; - -struct region { - struct region_hash *rh; /* FIXME: can we get rid of this ? */ - region_t key; - int state; - - struct list_head hash_list; - struct list_head list; - - atomic_t pending; - struct bio_list delayed_bios; -}; - - -/*----------------------------------------------------------------- * Mirror set structures. *---------------------------------------------------------------*/ enum dm_raid1_error { @@ -132,8 +51,7 @@ struct mirror { struct mirror_set { struct dm_target *ti; struct list_head list; - struct region_hash rh; - struct dm_kcopyd_client *kcopyd_client; + uint64_t features; spinlock_t lock; /* protects the lists */ @@ -141,6 +59,8 @@ struct mirror_set { struct bio_list writes; struct bio_list failures; + struct dm_region_hash *rh; + struct dm_kcopyd_client *kcopyd_client; struct dm_io_client *io_client; mempool_t *read_record_pool; @@ -159,25 +79,14 @@ struct mirror_set { struct work_struct trigger_event; - unsigned int nr_mirrors; + unsigned nr_mirrors; struct mirror mirror[0]; }; -/* - * Conversion fns - */ -static inline region_t bio_to_region(struct region_hash *rh, struct bio *bio) -{ - return (bio->bi_sector - rh->ms->ti->begin) >> rh->region_shift; -} - -static inline sector_t region_to_sector(struct region_hash *rh, region_t region) +static void wakeup_mirrord(void *context) { - return region << rh->region_shift; -} + struct mirror_set *ms = context; -static void wake(struct mirror_set *ms) -{ queue_work(ms->kmirrord_wq, &ms->kmirrord_work); } @@ -186,7 +95,7 @@ static void delayed_wake_fn(unsigned long data) struct mirror_set *ms = (struct mirror_set *) data; clear_bit(0, &ms->timer_pending); - wake(ms); + wakeup_mirrord(ms); } static void delayed_wake(struct mirror_set *ms) @@ -200,473 +109,34 @@ static void delayed_wake(struct mirror_set *ms) add_timer(&ms->timer); } -/* FIXME move this */ -static void queue_bio(struct mirror_set *ms, struct bio *bio, int rw); - -#define MIN_REGIONS 64 -#define MAX_RECOVERY 1 -static int rh_init(struct region_hash *rh, struct mirror_set *ms, - struct dm_dirty_log *log, uint32_t region_size, - region_t nr_regions) +static void wakeup_all_recovery_waiters(void *context) { - unsigned int nr_buckets, max_buckets; - size_t i; - - /* - * Calculate a suitable number of buckets for our hash - * table. - */ - max_buckets = nr_regions >> 6; - for (nr_buckets = 128u; nr_buckets < max_buckets; nr_buckets <<= 1) - ; - nr_buckets >>= 1; - - rh->ms = ms; - rh->log = log; - rh->region_size = region_size; - rh->region_shift = ffs(region_size) - 1; - rwlock_init(&rh->hash_lock); - rh->mask = nr_buckets - 1; - rh->nr_buckets = nr_buckets; - - rh->buckets = vmalloc(nr_buckets * sizeof(*rh->buckets)); - if (!rh->buckets) { - DMERR("unable to allocate region hash memory"); - return -ENOMEM; - } - - for (i = 0; i < nr_buckets; i++) - INIT_LIST_HEAD(rh->buckets + i); - - spin_lock_init(&rh->region_lock); - sema_init(&rh->recovery_count, 0); - atomic_set(&rh->recovery_in_flight, 0); - INIT_LIST_HEAD(&rh->clean_regions); - INIT_LIST_HEAD(&rh->quiesced_regions); - INIT_LIST_HEAD(&rh->recovered_regions); - INIT_LIST_HEAD(&rh->failed_recovered_regions); - - rh->region_pool = mempool_create_kmalloc_pool(MIN_REGIONS, - sizeof(struct region)); - if (!rh->region_pool) { - vfree(rh->buckets); - rh->buckets = NULL; - return -ENOMEM; - } - - return 0; + wake_up_all(&_kmirrord_recovery_stopped); } -static void rh_exit(struct region_hash *rh) -{ - unsigned int h; - struct region *reg, *nreg; - - BUG_ON(!list_empty(&rh->quiesced_regions)); - for (h = 0; h < rh->nr_buckets; h++) { - list_for_each_entry_safe(reg, nreg, rh->buckets + h, hash_list) { - BUG_ON(atomic_read(®->pending)); - mempool_free(reg, rh->region_pool); - } - } - - if (rh->log) - dm_dirty_log_destroy(rh->log); - if (rh->region_pool) - mempool_destroy(rh->region_pool); - vfree(rh->buckets); -} - -#define RH_HASH_MULT 2654435387U - -static inline unsigned int rh_hash(struct region_hash *rh, region_t region) -{ - return (unsigned int) ((region * RH_HASH_MULT) >> 12) & rh->mask; -} - -static struct region *__rh_lookup(struct region_hash *rh, region_t region) -{ - struct region *reg; - - list_for_each_entry (reg, rh->buckets + rh_hash(rh, region), hash_list) - if (reg->key == region) - return reg; - - return NULL; -} - -static void __rh_insert(struct region_hash *rh, struct region *reg) -{ - unsigned int h = rh_hash(rh, reg->key); - list_add(®->hash_list, rh->buckets + h); -} - -static struct region *__rh_alloc(struct region_hash *rh, region_t region) -{ - struct region *reg, *nreg; - - read_unlock(&rh->hash_lock); - nreg = mempool_alloc(rh->region_pool, GFP_ATOMIC); - if (unlikely(!nreg)) - nreg = kmalloc(sizeof(struct region), GFP_NOIO); - nreg->state = rh->log->type->in_sync(rh->log, region, 1) ? - RH_CLEAN : RH_NOSYNC; - nreg->rh = rh; - nreg->key = region; - - INIT_LIST_HEAD(&nreg->list); - - atomic_set(&nreg->pending, 0); - bio_list_init(&nreg->delayed_bios); - write_lock_irq(&rh->hash_lock); - - reg = __rh_lookup(rh, region); - if (reg) - /* we lost the race */ - mempool_free(nreg, rh->region_pool); - - else { - __rh_insert(rh, nreg); - if (nreg->state == RH_CLEAN) { - spin_lock(&rh->region_lock); - list_add(&nreg->list, &rh->clean_regions); - spin_unlock(&rh->region_lock); - } - reg = nreg; - } - write_unlock_irq(&rh->hash_lock); - read_lock(&rh->hash_lock); - - return reg; -} - -static inline struct region *__rh_find(struct region_hash *rh, region_t region) -{ - struct region *reg; - - reg = __rh_lookup(rh, region); - if (!reg) - reg = __rh_alloc(rh, region); - - return reg; -} - -static int rh_state(struct region_hash *rh, region_t region, int may_block) -{ - int r; - struct region *reg; - - read_lock(&rh->hash_lock); - reg = __rh_lookup(rh, region); - read_unlock(&rh->hash_lock); - - if (reg) - return reg->state; - - /* - * The region wasn't in the hash, so we fall back to the - * dirty log. - */ - r = rh->log->type->in_sync(rh->log, region, may_block); - - /* - * Any error from the dirty log (eg. -EWOULDBLOCK) gets - * taken as a RH_NOSYNC - */ - return r == 1 ? RH_CLEAN : RH_NOSYNC; -} - -static inline int rh_in_sync(struct region_hash *rh, - region_t region, int may_block) -{ - int state = rh_state(rh, region, may_block); - return state == RH_CLEAN || state == RH_DIRTY; -} - -static void dispatch_bios(struct mirror_set *ms, struct bio_list *bio_list) -{ - struct bio *bio; - - while ((bio = bio_list_pop(bio_list))) { - queue_bio(ms, bio, WRITE); - } -} - -static void complete_resync_work(struct region *reg, int success) -{ - struct region_hash *rh = reg->rh; - - rh->log->type->set_region_sync(rh->log, reg->key, success); - - /* - * Dispatch the bios before we call 'wake_up_all'. - * This is important because if we are suspending, - * we want to know that recovery is complete and - * the work queue is flushed. If we wake_up_all - * before we dispatch_bios (queue bios and call wake()), - * then we risk suspending before the work queue - * has been properly flushed. - */ - dispatch_bios(rh->ms, ®->delayed_bios); - if (atomic_dec_and_test(&rh->recovery_in_flight)) - wake_up_all(&_kmirrord_recovery_stopped); - up(&rh->recovery_count); -} - -static void rh_update_states(struct region_hash *rh) -{ - struct region *reg, *next; - - LIST_HEAD(clean); - LIST_HEAD(recovered); - LIST_HEAD(failed_recovered); - - /* - * Quickly grab the lists. - */ - write_lock_irq(&rh->hash_lock); - spin_lock(&rh->region_lock); - if (!list_empty(&rh->clean_regions)) { - list_splice_init(&rh->clean_regions, &clean); - - list_for_each_entry(reg, &clean, list) - list_del(®->hash_list); - } - - if (!list_empty(&rh->recovered_regions)) { - list_splice_init(&rh->recovered_regions, &recovered); - - list_for_each_entry (reg, &recovered, list) - list_del(®->hash_list); - } - - if (!list_empty(&rh->failed_recovered_regions)) { - list_splice_init(&rh->failed_recovered_regions, - &failed_recovered); - - list_for_each_entry(reg, &failed_recovered, list) - list_del(®->hash_list); - } - - spin_unlock(&rh->region_lock); - write_unlock_irq(&rh->hash_lock); - - /* - * All the regions on the recovered and clean lists have - * now been pulled out of the system, so no need to do - * any more locking. - */ - list_for_each_entry_safe (reg, next, &recovered, list) { - rh->log->type->clear_region(rh->log, reg->key); - complete_resync_work(reg, 1); - mempool_free(reg, rh->region_pool); - } - - list_for_each_entry_safe(reg, next, &failed_recovered, list) { - complete_resync_work(reg, errors_handled(rh->ms) ? 0 : 1); - mempool_free(reg, rh->region_pool); - } - - list_for_each_entry_safe(reg, next, &clean, list) { - rh->log->type->clear_region(rh->log, reg->key); - mempool_free(reg, rh->region_pool); - } - - rh->log->type->flush(rh->log); -} - -static void rh_inc(struct region_hash *rh, region_t region) -{ - struct region *reg; - - read_lock(&rh->hash_lock); - reg = __rh_find(rh, region); - - spin_lock_irq(&rh->region_lock); - atomic_inc(®->pending); - - if (reg->state == RH_CLEAN) { - reg->state = RH_DIRTY; - list_del_init(®->list); /* take off the clean list */ - spin_unlock_irq(&rh->region_lock); - - rh->log->type->mark_region(rh->log, reg->key); - } else - spin_unlock_irq(&rh->region_lock); - - - read_unlock(&rh->hash_lock); -} - -static void rh_inc_pending(struct region_hash *rh, struct bio_list *bios) -{ - struct bio *bio; - - for (bio = bios->head; bio; bio = bio->bi_next) - rh_inc(rh, bio_to_region(rh, bio)); -} - -static void rh_dec(struct region_hash *rh, region_t region) +static void queue_bio(struct mirror_set *ms, struct bio *bio, int rw) { unsigned long flags; - struct region *reg; int should_wake = 0; + struct bio_list *bl; - read_lock(&rh->hash_lock); - reg = __rh_lookup(rh, region); - read_unlock(&rh->hash_lock); - - spin_lock_irqsave(&rh->region_lock, flags); - if (atomic_dec_and_test(®->pending)) { - /* - * There is no pending I/O for this region. - * We can move the region to corresponding list for next action. - * At this point, the region is not yet connected to any list. - * - * If the state is RH_NOSYNC, the region should be kept off - * from clean list. - * The hash entry for RH_NOSYNC will remain in memory - * until the region is recovered or the map is reloaded. - */ - - /* do nothing for RH_NOSYNC */ - if (reg->state == RH_RECOVERING) { - list_add_tail(®->list, &rh->quiesced_regions); - } else if (reg->state == RH_DIRTY) { - reg->state = RH_CLEAN; - list_add(®->list, &rh->clean_regions); - } - should_wake = 1; - } - spin_unlock_irqrestore(&rh->region_lock, flags); + bl = (rw == WRITE) ? &ms->writes : &ms->reads; + spin_lock_irqsave(&ms->lock, flags); + should_wake = !(bl->head); + bio_list_add(bl, bio); + spin_unlock_irqrestore(&ms->lock, flags); if (should_wake) - wake(rh->ms); -} - -/* - * Starts quiescing a region in preparation for recovery. - */ -static int __rh_recovery_prepare(struct region_hash *rh) -{ - int r; - struct region *reg; - region_t region; - - /* - * Ask the dirty log what's next. - */ - r = rh->log->type->get_resync_work(rh->log, ®ion); - if (r <= 0) - return r; - - /* - * Get this region, and start it quiescing by setting the - * recovering flag. - */ - read_lock(&rh->hash_lock); - reg = __rh_find(rh, region); - read_unlock(&rh->hash_lock); - - spin_lock_irq(&rh->region_lock); - reg->state = RH_RECOVERING; - - /* Already quiesced ? */ - if (atomic_read(®->pending)) - list_del_init(®->list); - else - list_move(®->list, &rh->quiesced_regions); - - spin_unlock_irq(&rh->region_lock); - - return 1; -} - -static void rh_recovery_prepare(struct region_hash *rh) -{ - /* Extra reference to avoid race with rh_stop_recovery */ - atomic_inc(&rh->recovery_in_flight); - - while (!down_trylock(&rh->recovery_count)) { - atomic_inc(&rh->recovery_in_flight); - if (__rh_recovery_prepare(rh) <= 0) { - atomic_dec(&rh->recovery_in_flight); - up(&rh->recovery_count); - break; - } - } - - /* Drop the extra reference */ - if (atomic_dec_and_test(&rh->recovery_in_flight)) - wake_up_all(&_kmirrord_recovery_stopped); -} - -/* - * Returns any quiesced regions. - */ -static struct region *rh_recovery_start(struct region_hash *rh) -{ - struct region *reg = NULL; - - spin_lock_irq(&rh->region_lock); - if (!list_empty(&rh->quiesced_regions)) { - reg = list_entry(rh->quiesced_regions.next, - struct region, list); - list_del_init(®->list); /* remove from the quiesced list */ - } - spin_unlock_irq(&rh->region_lock); - - return reg; -} - -static void rh_recovery_end(struct region *reg, int success) -{ - struct region_hash *rh = reg->rh; - - spin_lock_irq(&rh->region_lock); - if (success) - list_add(®->list, ®->rh->recovered_regions); - else { - reg->state = RH_NOSYNC; - list_add(®->list, ®->rh->failed_recovered_regions); - } - spin_unlock_irq(&rh->region_lock); - - wake(rh->ms); + wakeup_mirrord(ms); } -static int rh_flush(struct region_hash *rh) +static void dispatch_bios(void *context, struct bio_list *bio_list) { - return rh->log->type->flush(rh->log); -} - -static void rh_delay(struct region_hash *rh, struct bio *bio) -{ - struct region *reg; - - read_lock(&rh->hash_lock); - reg = __rh_find(rh, bio_to_region(rh, bio)); - bio_list_add(®->delayed_bios, bio); - read_unlock(&rh->hash_lock); -} - -static void rh_stop_recovery(struct region_hash *rh) -{ - int i; - - /* wait for any recovering regions */ - for (i = 0; i < MAX_RECOVERY; i++) - down(&rh->recovery_count); -} - -static void rh_start_recovery(struct region_hash *rh) -{ - int i; - - for (i = 0; i < MAX_RECOVERY; i++) - up(&rh->recovery_count); + struct mirror_set *ms = context; + struct bio *bio; - wake(rh->ms); + while ((bio = bio_list_pop(bio_list))) + queue_bio(ms, bio, WRITE); } #define MIN_READ_RECORDS 20 @@ -776,8 +246,8 @@ out: static void recovery_complete(int read_err, unsigned long write_err, void *context) { - struct region *reg = (struct region *)context; - struct mirror_set *ms = reg->rh->ms; + struct dm_region *reg = context; + struct mirror_set *ms = dm_rh_region_context(reg); int m, bit = 0; if (read_err) { @@ -803,31 +273,33 @@ static void recovery_complete(int read_err, unsigned long write_err, } } - rh_recovery_end(reg, !(read_err || write_err)); + dm_rh_recovery_end(reg, !(read_err || write_err)); } -static int recover(struct mirror_set *ms, struct region *reg) +static int recover(struct mirror_set *ms, struct dm_region *reg) { int r; - unsigned int i; + unsigned i; struct dm_io_region from, to[DM_KCOPYD_MAX_REGIONS], *dest; struct mirror *m; unsigned long flags = 0; + region_t key = dm_rh_get_region_key(reg); + sector_t region_size = dm_rh_get_region_size(ms->rh); /* fill in the source */ m = get_default_mirror(ms); from.bdev = m->dev->bdev; - from.sector = m->offset + region_to_sector(reg->rh, reg->key); - if (reg->key == (ms->nr_regions - 1)) { + from.sector = m->offset + dm_rh_region_to_sector(ms->rh, key); + if (key == (ms->nr_regions - 1)) { /* * The final region may be smaller than * region_size. */ - from.count = ms->ti->len & (reg->rh->region_size - 1); + from.count = ms->ti->len & (region_size - 1); if (!from.count) - from.count = reg->rh->region_size; + from.count = region_size; } else - from.count = reg->rh->region_size; + from.count = region_size; /* fill in the destinations */ for (i = 0, dest = to; i < ms->nr_mirrors; i++) { @@ -836,7 +308,7 @@ static int recover(struct mirror_set *ms, struct region *reg) m = ms->mirror + i; dest->bdev = m->dev->bdev; - dest->sector = m->offset + region_to_sector(reg->rh, reg->key); + dest->sector = m->offset + dm_rh_region_to_sector(ms->rh, key); dest->count = from.count; dest++; } @@ -853,22 +325,22 @@ static int recover(struct mirror_set *ms, struct region *reg) static void do_recovery(struct mirror_set *ms) { + struct dm_region *reg; + struct dm_dirty_log *log = dm_rh_dirty_log(ms->rh); int r; - struct region *reg; - struct dm_dirty_log *log = ms->rh.log; /* * Start quiescing some regions. */ - rh_recovery_prepare(&ms->rh); + dm_rh_recovery_prepare(ms->rh); /* * Copy any already quiesced regions. */ - while ((reg = rh_recovery_start(&ms->rh))) { + while ((reg = dm_rh_recovery_start(ms->rh))) { r = recover(ms, reg); if (r) - rh_recovery_end(reg, 0); + dm_rh_recovery_end(reg, 0); } /* @@ -909,9 +381,10 @@ static int default_ok(struct mirror *m) static int mirror_available(struct mirror_set *ms, struct bio *bio) { - region_t region = bio_to_region(&ms->rh, bio); + struct dm_dirty_log *log = dm_rh_dirty_log(ms->rh); + region_t region = dm_rh_bio_to_region(ms->rh, bio); - if (ms->rh.log->type->in_sync(ms->rh.log, region, 0)) + if (log->type->in_sync(log, region, 0)) return choose_mirror(ms, bio->bi_sector) ? 1 : 0; return 0; @@ -985,7 +458,14 @@ static void read_async_bio(struct mirror *m, struct bio *bio) map_region(&io, m, bio); bio_set_m(bio, m); - (void) dm_io(&io_req, 1, &io, NULL); + BUG_ON(dm_io(&io_req, 1, &io, NULL)); +} + +static inline int region_in_sync(struct mirror_set *ms, region_t region, + int may_block) +{ + int state = dm_rh_get_state(ms->rh, region, may_block); + return state == DM_RH_CLEAN || state == DM_RH_DIRTY; } static void do_reads(struct mirror_set *ms, struct bio_list *reads) @@ -995,13 +475,13 @@ static void do_reads(struct mirror_set *ms, struct bio_list *reads) struct mirror *m; while ((bio = bio_list_pop(reads))) { - region = bio_to_region(&ms->rh, bio); + region = dm_rh_bio_to_region(ms->rh, bio); m = get_default_mirror(ms); /* * We can only read balance if the region is in sync. */ - if (likely(rh_in_sync(&ms->rh, region, 1))) + if (likely(region_in_sync(ms, region, 1))) m = choose_mirror(ms, bio->bi_sector); else if (m && atomic_read(&m->error_count)) m = NULL; @@ -1024,57 +504,6 @@ static void do_reads(struct mirror_set *ms, struct bio_list *reads) * NOSYNC: increment pending, just write to the default mirror *---------------------------------------------------------------*/ -/* __bio_mark_nosync - * @ms - * @bio - * @done - * @error - * - * The bio was written on some mirror(s) but failed on other mirror(s). - * We can successfully endio the bio but should avoid the region being - * marked clean by setting the state RH_NOSYNC. - * - * This function is _not_ safe in interrupt context! - */ -static void __bio_mark_nosync(struct mirror_set *ms, - struct bio *bio, unsigned done, int error) -{ - unsigned long flags; - struct region_hash *rh = &ms->rh; - struct dm_dirty_log *log = ms->rh.log; - struct region *reg; - region_t region = bio_to_region(rh, bio); - int recovering = 0; - - /* We must inform the log that the sync count has changed. */ - log->type->set_region_sync(log, region, 0); - ms->in_sync = 0; - - read_lock(&rh->hash_lock); - reg = __rh_find(rh, region); - read_unlock(&rh->hash_lock); - - /* region hash entry should exist because write was in-flight */ - BUG_ON(!reg); - BUG_ON(!list_empty(®->list)); - - spin_lock_irqsave(&rh->region_lock, flags); - /* - * Possible cases: - * 1) RH_DIRTY - * 2) RH_NOSYNC: was dirty, other preceeding writes failed - * 3) RH_RECOVERING: flushing pending writes - * Either case, the region should have not been connected to list. - */ - recovering = (reg->state == RH_RECOVERING); - reg->state = RH_NOSYNC; - BUG_ON(!list_empty(®->list)); - spin_unlock_irqrestore(&rh->region_lock, flags); - - bio_endio(bio, error); - if (recovering) - complete_resync_work(reg, 0); -} static void write_callback(unsigned long error, void *context) { @@ -1119,7 +548,7 @@ static void write_callback(unsigned long error, void *context) bio_list_add(&ms->failures, bio); spin_unlock_irqrestore(&ms->lock, flags); if (should_wake) - wake(ms); + wakeup_mirrord(ms); return; } out: @@ -1149,7 +578,7 @@ static void do_write(struct mirror_set *ms, struct bio *bio) */ bio_set_m(bio, get_default_mirror(ms)); - (void) dm_io(&io_req, ms->nr_mirrors, io, NULL); + BUG_ON(dm_io(&io_req, ms->nr_mirrors, io, NULL)); } static void do_writes(struct mirror_set *ms, struct bio_list *writes) @@ -1169,18 +598,19 @@ static void do_writes(struct mirror_set *ms, struct bio_list *writes) bio_list_init(&recover); while ((bio = bio_list_pop(writes))) { - state = rh_state(&ms->rh, bio_to_region(&ms->rh, bio), 1); + state = dm_rh_get_state(ms->rh, + dm_rh_bio_to_region(ms->rh, bio), 1); switch (state) { - case RH_CLEAN: - case RH_DIRTY: + case DM_RH_CLEAN: + case DM_RH_DIRTY: this_list = &sync; break; - case RH_NOSYNC: + case DM_RH_NOSYNC: this_list = &nosync; break; - case RH_RECOVERING: + case DM_RH_RECOVERING: this_list = &recover; break; } @@ -1193,9 +623,9 @@ static void do_writes(struct mirror_set *ms, struct bio_list *writes) * be written to (writes to recover regions are going to * be delayed). */ - rh_inc_pending(&ms->rh, &sync); - rh_inc_pending(&ms->rh, &nosync); - ms->log_failure = rh_flush(&ms->rh) ? 1 : 0; + dm_rh_inc_pending(ms->rh, &sync); + dm_rh_inc_pending(ms->rh, &nosync); + ms->log_failure = dm_rh_flush(ms->rh) ? 1 : 0; /* * Dispatch io. @@ -1204,13 +634,13 @@ static void do_writes(struct mirror_set *ms, struct bio_list *writes) spin_lock_irq(&ms->lock); bio_list_merge(&ms->failures, &sync); spin_unlock_irq(&ms->lock); - wake(ms); + wakeup_mirrord(ms); } else while ((bio = bio_list_pop(&sync))) do_write(ms, bio); while ((bio = bio_list_pop(&recover))) - rh_delay(&ms->rh, bio); + dm_rh_delay(ms->rh, bio); while ((bio = bio_list_pop(&nosync))) { map_bio(get_default_mirror(ms), bio); @@ -1227,7 +657,8 @@ static void do_failures(struct mirror_set *ms, struct bio_list *failures) if (!ms->log_failure) { while ((bio = bio_list_pop(failures))) - __bio_mark_nosync(ms, bio, bio->bi_size, 0); + ms->in_sync = 0; + dm_rh_mark_nosync(ms->rh, bio, bio->bi_size, 0); return; } @@ -1280,8 +711,8 @@ static void trigger_event(struct work_struct *work) *---------------------------------------------------------------*/ static void do_mirror(struct work_struct *work) { - struct mirror_set *ms =container_of(work, struct mirror_set, - kmirrord_work); + struct mirror_set *ms = container_of(work, struct mirror_set, + kmirrord_work); struct bio_list reads, writes, failures; unsigned long flags; @@ -1294,7 +725,7 @@ static void do_mirror(struct work_struct *work) bio_list_init(&ms->failures); spin_unlock_irqrestore(&ms->lock, flags); - rh_update_states(&ms->rh); + dm_rh_update_states(ms->rh, errors_handled(ms)); do_recovery(ms); do_reads(ms, &reads); do_writes(ms, &writes); @@ -1303,7 +734,6 @@ static void do_mirror(struct work_struct *work) dm_table_unplug_all(ms->ti->table); } - /*----------------------------------------------------------------- * Target functions *---------------------------------------------------------------*/ @@ -1315,9 +745,6 @@ static struct mirror_set *alloc_context(unsigned int nr_mirrors, size_t len; struct mirror_set *ms = NULL; - if (array_too_big(sizeof(*ms), sizeof(ms->mirror[0]), nr_mirrors)) - return NULL; - len = sizeof(*ms) + (sizeof(ms->mirror[0]) * nr_mirrors); ms = kzalloc(len, GFP_KERNEL); @@ -1353,7 +780,11 @@ static struct mirror_set *alloc_context(unsigned int nr_mirrors, return NULL; } - if (rh_init(&ms->rh, ms, dl, region_size, ms->nr_regions)) { + ms->rh = dm_region_hash_create(ms, dispatch_bios, wakeup_mirrord, + wakeup_all_recovery_waiters, + ms->ti->begin, MAX_RECOVERY, + dl, region_size, ms->nr_regions); + if (IS_ERR(ms->rh)) { ti->error = "Error creating dirty region hash"; dm_io_client_destroy(ms->io_client); mempool_destroy(ms->read_record_pool); @@ -1371,7 +802,7 @@ static void free_context(struct mirror_set *ms, struct dm_target *ti, dm_put_device(ti, ms->mirror[m].dev); dm_io_client_destroy(ms->io_client); - rh_exit(&ms->rh); + dm_region_hash_destroy(ms->rh); mempool_destroy(ms->read_record_pool); kfree(ms); } @@ -1411,10 +842,10 @@ static int get_mirror(struct mirror_set *ms, struct dm_target *ti, * Create dirty log: log_type #log_params <log_params> */ static struct dm_dirty_log *create_dirty_log(struct dm_target *ti, - unsigned int argc, char **argv, - unsigned int *args_used) + unsigned argc, char **argv, + unsigned *args_used) { - unsigned int param_count; + unsigned param_count; struct dm_dirty_log *dl; if (argc < 2) { @@ -1545,7 +976,7 @@ static int mirror_ctr(struct dm_target *ti, unsigned int argc, char **argv) } ti->private = ms; - ti->split_io = ms->rh.region_size; + ti->split_io = dm_rh_get_region_size(ms->rh); ms->kmirrord_wq = create_singlethread_workqueue("kmirrord"); if (!ms->kmirrord_wq) { @@ -1580,11 +1011,11 @@ static int mirror_ctr(struct dm_target *ti, unsigned int argc, char **argv) goto err_destroy_wq; } - r = dm_kcopyd_client_create(DM_IO_PAGES, &ms->kcopyd_client); + r = dm_kcopyd_client_create(DM_KCOPYD_PAGES, &ms->kcopyd_client); if (r) goto err_destroy_wq; - wake(ms); + wakeup_mirrord(ms); return 0; err_destroy_wq: @@ -1605,22 +1036,6 @@ static void mirror_dtr(struct dm_target *ti) free_context(ms, ti, ms->nr_mirrors); } -static void queue_bio(struct mirror_set *ms, struct bio *bio, int rw) -{ - unsigned long flags; - int should_wake = 0; - struct bio_list *bl; - - bl = (rw == WRITE) ? &ms->writes : &ms->reads; - spin_lock_irqsave(&ms->lock, flags); - should_wake = !(bl->head); - bio_list_add(bl, bio); - spin_unlock_irqrestore(&ms->lock, flags); - - if (should_wake) - wake(ms); -} - /* * Mirror mapping function */ @@ -1631,16 +1046,16 @@ static int mirror_map(struct dm_target *ti, struct bio *bio, struct mirror *m; struct mirror_set *ms = ti->private; struct dm_raid1_read_record *read_record = NULL; + struct dm_dirty_log *log = dm_rh_dirty_log(ms->rh); if (rw == WRITE) { /* Save region for mirror_end_io() handler */ - map_context->ll = bio_to_region(&ms->rh, bio); + map_context->ll = dm_rh_bio_to_region(ms->rh, bio); queue_bio(ms, bio, rw); return DM_MAPIO_SUBMITTED; } - r = ms->rh.log->type->in_sync(ms->rh.log, - bio_to_region(&ms->rh, bio), 0); + r = log->type->in_sync(log, dm_rh_bio_to_region(ms->rh, bio), 0); if (r < 0 && r != -EWOULDBLOCK) return r; @@ -1688,7 +1103,7 @@ static int mirror_end_io(struct dm_target *ti, struct bio *bio, * We need to dec pending if this was a write. */ if (rw == WRITE) { - rh_dec(&ms->rh, map_context->ll); + dm_rh_dec(ms->rh, map_context->ll); return error; } @@ -1744,7 +1159,7 @@ out: static void mirror_presuspend(struct dm_target *ti) { struct mirror_set *ms = (struct mirror_set *) ti->private; - struct dm_dirty_log *log = ms->rh.log; + struct dm_dirty_log *log = dm_rh_dirty_log(ms->rh); atomic_set(&ms->suspend, 1); @@ -1752,10 +1167,10 @@ static void mirror_presuspend(struct dm_target *ti) * We must finish up all the work that we've * generated (i.e. recovery work). */ - rh_stop_recovery(&ms->rh); + dm_rh_stop_recovery(ms->rh); wait_event(_kmirrord_recovery_stopped, - !atomic_read(&ms->rh.recovery_in_flight)); + !dm_rh_recovery_in_flight(ms->rh)); if (log->type->presuspend && log->type->presuspend(log)) /* FIXME: need better error handling */ @@ -1773,7 +1188,7 @@ static void mirror_presuspend(struct dm_target *ti) static void mirror_postsuspend(struct dm_target *ti) { struct mirror_set *ms = ti->private; - struct dm_dirty_log *log = ms->rh.log; + struct dm_dirty_log *log = dm_rh_dirty_log(ms->rh); if (log->type->postsuspend && log->type->postsuspend(log)) /* FIXME: need better error handling */ @@ -1783,13 +1198,13 @@ static void mirror_postsuspend(struct dm_target *ti) static void mirror_resume(struct dm_target *ti) { struct mirror_set *ms = ti->private; - struct dm_dirty_log *log = ms->rh.log; + struct dm_dirty_log *log = dm_rh_dirty_log(ms->rh); atomic_set(&ms->suspend, 0); if (log->type->resume && log->type->resume(log)) /* FIXME: need better error handling */ DMWARN("log resume failed"); - rh_start_recovery(&ms->rh); + dm_rh_start_recovery(ms->rh); } /* @@ -1821,7 +1236,7 @@ static int mirror_status(struct dm_target *ti, status_type_t type, { unsigned int m, sz = 0; struct mirror_set *ms = (struct mirror_set *) ti->private; - struct dm_dirty_log *log = ms->rh.log; + struct dm_dirty_log *log = dm_rh_dirty_log(ms->rh); char buffer[ms->nr_mirrors + 1]; switch (type) { @@ -1834,15 +1249,15 @@ static int mirror_status(struct dm_target *ti, status_type_t type, buffer[m] = '\0'; DMEMIT("%llu/%llu 1 %s ", - (unsigned long long)log->type->get_sync_count(ms->rh.log), + (unsigned long long)log->type->get_sync_count(log), (unsigned long long)ms->nr_regions, buffer); - sz += log->type->status(ms->rh.log, type, result+sz, maxlen-sz); + sz += log->type->status(log, type, result+sz, maxlen-sz); break; case STATUSTYPE_TABLE: - sz = log->type->status(ms->rh.log, type, result, maxlen); + sz = log->type->status(log, type, result, maxlen); DMEMIT("%d", ms->nr_mirrors); for (m = 0; m < ms->nr_mirrors; m++) diff --git a/drivers/md/dm-region-hash.c b/drivers/md/dm-region-hash.c new file mode 100644 index 000000000000..59f8d9df9e1a --- /dev/null +++ b/drivers/md/dm-region-hash.c @@ -0,0 +1,704 @@ +/* + * Copyright (C) 2003 Sistina Software Limited. + * Copyright (C) 2004-2008 Red Hat, Inc. All rights reserved. + * + * This file is released under the GPL. + */ + +#include <linux/dm-dirty-log.h> +#include <linux/dm-region-hash.h> + +#include <linux/ctype.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/vmalloc.h> + +#include "dm.h" +#include "dm-bio-list.h" + +#define DM_MSG_PREFIX "region hash" + +/*----------------------------------------------------------------- + * Region hash + * + * The mirror splits itself up into discrete regions. Each + * region can be in one of three states: clean, dirty, + * nosync. There is no need to put clean regions in the hash. + * + * In addition to being present in the hash table a region _may_ + * be present on one of three lists. + * + * clean_regions: Regions on this list have no io pending to + * them, they are in sync, we are no longer interested in them, + * they are dull. dm_rh_update_states() will remove them from the + * hash table. + * + * quiesced_regions: These regions have been spun down, ready + * for recovery. rh_recovery_start() will remove regions from + * this list and hand them to kmirrord, which will schedule the + * recovery io with kcopyd. + * + * recovered_regions: Regions that kcopyd has successfully + * recovered. dm_rh_update_states() will now schedule any delayed + * io, up the recovery_count, and remove the region from the + * hash. + * + * There are 2 locks: + * A rw spin lock 'hash_lock' protects just the hash table, + * this is never held in write mode from interrupt context, + * which I believe means that we only have to disable irqs when + * doing a write lock. + * + * An ordinary spin lock 'region_lock' that protects the three + * lists in the region_hash, with the 'state', 'list' and + * 'delayed_bios' fields of the regions. This is used from irq + * context, so all other uses will have to suspend local irqs. + *---------------------------------------------------------------*/ +struct dm_region_hash { + uint32_t region_size; + unsigned region_shift; + + /* holds persistent region state */ + struct dm_dirty_log *log; + + /* hash table */ + rwlock_t hash_lock; + mempool_t *region_pool; + unsigned mask; + unsigned nr_buckets; + unsigned prime; + unsigned shift; + struct list_head *buckets; + + unsigned max_recovery; /* Max # of regions to recover in parallel */ + + spinlock_t region_lock; + atomic_t recovery_in_flight; + struct semaphore recovery_count; + struct list_head clean_regions; + struct list_head quiesced_regions; + struct list_head recovered_regions; + struct list_head failed_recovered_regions; + + void *context; + sector_t target_begin; + + /* Callback function to schedule bios writes */ + void (*dispatch_bios)(void *context, struct bio_list *bios); + + /* Callback function to wakeup callers worker thread. */ + void (*wakeup_workers)(void *context); + + /* Callback function to wakeup callers recovery waiters. */ + void (*wakeup_all_recovery_waiters)(void *context); +}; + +struct dm_region { + struct dm_region_hash *rh; /* FIXME: can we get rid of this ? */ + region_t key; + int state; + + struct list_head hash_list; + struct list_head list; + + atomic_t pending; + struct bio_list delayed_bios; +}; + +/* + * Conversion fns + */ +static region_t dm_rh_sector_to_region(struct dm_region_hash *rh, sector_t sector) +{ + return sector >> rh->region_shift; +} + +sector_t dm_rh_region_to_sector(struct dm_region_hash *rh, region_t region) +{ + return region << rh->region_shift; +} +EXPORT_SYMBOL_GPL(dm_rh_region_to_sector); + +region_t dm_rh_bio_to_region(struct dm_region_hash *rh, struct bio *bio) +{ + return dm_rh_sector_to_region(rh, bio->bi_sector - rh->target_begin); +} +EXPORT_SYMBOL_GPL(dm_rh_bio_to_region); + +void *dm_rh_region_context(struct dm_region *reg) +{ + return reg->rh->context; +} +EXPORT_SYMBOL_GPL(dm_rh_region_context); + +region_t dm_rh_get_region_key(struct dm_region *reg) +{ + return reg->key; +} +EXPORT_SYMBOL_GPL(dm_rh_get_region_key); + +sector_t dm_rh_get_region_size(struct dm_region_hash *rh) +{ + return rh->region_size; +} +EXPORT_SYMBOL_GPL(dm_rh_get_region_size); + +/* + * FIXME: shall we pass in a structure instead of all these args to + * dm_region_hash_create()???? + */ +#define RH_HASH_MULT 2654435387U +#define RH_HASH_SHIFT 12 + +#define MIN_REGIONS 64 +struct dm_region_hash *dm_region_hash_create( + void *context, void (*dispatch_bios)(void *context, + struct bio_list *bios), + void (*wakeup_workers)(void *context), + void (*wakeup_all_recovery_waiters)(void *context), + sector_t target_begin, unsigned max_recovery, + struct dm_dirty_log *log, uint32_t region_size, + region_t nr_regions) +{ + struct dm_region_hash *rh; + unsigned nr_buckets, max_buckets; + size_t i; + + /* + * Calculate a suitable number of buckets for our hash + * table. + */ + max_buckets = nr_regions >> 6; + for (nr_buckets = 128u; nr_buckets < max_buckets; nr_buckets <<= 1) + ; + nr_buckets >>= 1; + + rh = kmalloc(sizeof(*rh), GFP_KERNEL); + if (!rh) { + DMERR("unable to allocate region hash memory"); + return ERR_PTR(-ENOMEM); + } + + rh->context = context; + rh->dispatch_bios = dispatch_bios; + rh->wakeup_workers = wakeup_workers; + rh->wakeup_all_recovery_waiters = wakeup_all_recovery_waiters; + rh->target_begin = target_begin; + rh->max_recovery = max_recovery; + rh->log = log; + rh->region_size = region_size; + rh->region_shift = ffs(region_size) - 1; + rwlock_init(&rh->hash_lock); + rh->mask = nr_buckets - 1; + rh->nr_buckets = nr_buckets; + + rh->shift = RH_HASH_SHIFT; + rh->prime = RH_HASH_MULT; + + rh->buckets = vmalloc(nr_buckets * sizeof(*rh->buckets)); + if (!rh->buckets) { + DMERR("unable to allocate region hash bucket memory"); + kfree(rh); + return ERR_PTR(-ENOMEM); + } + + for (i = 0; i < nr_buckets; i++) + INIT_LIST_HEAD(rh->buckets + i); + + spin_lock_init(&rh->region_lock); + sema_init(&rh->recovery_count, 0); + atomic_set(&rh->recovery_in_flight, 0); + INIT_LIST_HEAD(&rh->clean_regions); + INIT_LIST_HEAD(&rh->quiesced_regions); + INIT_LIST_HEAD(&rh->recovered_regions); + INIT_LIST_HEAD(&rh->failed_recovered_regions); + + rh->region_pool = mempool_create_kmalloc_pool(MIN_REGIONS, + sizeof(struct dm_region)); + if (!rh->region_pool) { + vfree(rh->buckets); + kfree(rh); + rh = ERR_PTR(-ENOMEM); + } + + return rh; +} +EXPORT_SYMBOL_GPL(dm_region_hash_create); + +void dm_region_hash_destroy(struct dm_region_hash *rh) +{ + unsigned h; + struct dm_region *reg, *nreg; + + BUG_ON(!list_empty(&rh->quiesced_regions)); + for (h = 0; h < rh->nr_buckets; h++) { + list_for_each_entry_safe(reg, nreg, rh->buckets + h, + hash_list) { + BUG_ON(atomic_read(®->pending)); + mempool_free(reg, rh->region_pool); + } + } + + if (rh->log) + dm_dirty_log_destroy(rh->log); + + if (rh->region_pool) + mempool_destroy(rh->region_pool); + + vfree(rh->buckets); + kfree(rh); +} +EXPORT_SYMBOL_GPL(dm_region_hash_destroy); + +struct dm_dirty_log *dm_rh_dirty_log(struct dm_region_hash *rh) +{ + return rh->log; +} +EXPORT_SYMBOL_GPL(dm_rh_dirty_log); + +static unsigned rh_hash(struct dm_region_hash *rh, region_t region) +{ + return (unsigned) ((region * rh->prime) >> rh->shift) & rh->mask; +} + +static struct dm_region *__rh_lookup(struct dm_region_hash *rh, region_t region) +{ + struct dm_region *reg; + struct list_head *bucket = rh->buckets + rh_hash(rh, region); + + list_for_each_entry(reg, bucket, hash_list) + if (reg->key == region) + return reg; + + return NULL; +} + +static void __rh_insert(struct dm_region_hash *rh, struct dm_region *reg) +{ + list_add(®->hash_list, rh->buckets + rh_hash(rh, reg->key)); +} + +static struct dm_region *__rh_alloc(struct dm_region_hash *rh, region_t region) +{ + struct dm_region *reg, *nreg; + + nreg = mempool_alloc(rh->region_pool, GFP_ATOMIC); + if (unlikely(!nreg)) + nreg = kmalloc(sizeof(*nreg), GFP_NOIO); + + nreg->state = rh->log->type->in_sync(rh->log, region, 1) ? + DM_RH_CLEAN : DM_RH_NOSYNC; + nreg->rh = rh; + nreg->key = region; + INIT_LIST_HEAD(&nreg->list); + atomic_set(&nreg->pending, 0); + bio_list_init(&nreg->delayed_bios); + + write_lock_irq(&rh->hash_lock); + reg = __rh_lookup(rh, region); + if (reg) + /* We lost the race. */ + mempool_free(nreg, rh->region_pool); + else { + __rh_insert(rh, nreg); + if (nreg->state == DM_RH_CLEAN) { + spin_lock(&rh->region_lock); + list_add(&nreg->list, &rh->clean_regions); + spin_unlock(&rh->region_lock); + } + + reg = nreg; + } + write_unlock_irq(&rh->hash_lock); + + return reg; +} + +static struct dm_region *__rh_find(struct dm_region_hash *rh, region_t region) +{ + struct dm_region *reg; + + reg = __rh_lookup(rh, region); + if (!reg) { + read_unlock(&rh->hash_lock); + reg = __rh_alloc(rh, region); + read_lock(&rh->hash_lock); + } + + return reg; +} + +int dm_rh_get_state(struct dm_region_hash *rh, region_t region, int may_block) +{ + int r; + struct dm_region *reg; + + read_lock(&rh->hash_lock); + reg = __rh_lookup(rh, region); + read_unlock(&rh->hash_lock); + + if (reg) + return reg->state; + + /* + * The region wasn't in the hash, so we fall back to the + * dirty log. + */ + r = rh->log->type->in_sync(rh->log, region, may_block); + + /* + * Any error from the dirty log (eg. -EWOULDBLOCK) gets + * taken as a DM_RH_NOSYNC + */ + return r == 1 ? DM_RH_CLEAN : DM_RH_NOSYNC; +} +EXPORT_SYMBOL_GPL(dm_rh_get_state); + +static void complete_resync_work(struct dm_region *reg, int success) +{ + struct dm_region_hash *rh = reg->rh; + + rh->log->type->set_region_sync(rh->log, reg->key, success); + + /* + * Dispatch the bios before we call 'wake_up_all'. + * This is important because if we are suspending, + * we want to know that recovery is complete and + * the work queue is flushed. If we wake_up_all + * before we dispatch_bios (queue bios and call wake()), + * then we risk suspending before the work queue + * has been properly flushed. + */ + rh->dispatch_bios(rh->context, ®->delayed_bios); + if (atomic_dec_and_test(&rh->recovery_in_flight)) + rh->wakeup_all_recovery_waiters(rh->context); + up(&rh->recovery_count); +} + +/* dm_rh_mark_nosync + * @ms + * @bio + * @done + * @error + * + * The bio was written on some mirror(s) but failed on other mirror(s). + * We can successfully endio the bio but should avoid the region being + * marked clean by setting the state DM_RH_NOSYNC. + * + * This function is _not_ safe in interrupt context! + */ +void dm_rh_mark_nosync(struct dm_region_hash *rh, + struct bio *bio, unsigned done, int error) +{ + unsigned long flags; + struct dm_dirty_log *log = rh->log; + struct dm_region *reg; + region_t region = dm_rh_bio_to_region(rh, bio); + int recovering = 0; + + /* We must inform the log that the sync count has changed. */ + log->type->set_region_sync(log, region, 0); + + read_lock(&rh->hash_lock); + reg = __rh_find(rh, region); + read_unlock(&rh->hash_lock); + + /* region hash entry should exist because write was in-flight */ + BUG_ON(!reg); + BUG_ON(!list_empty(®->list)); + + spin_lock_irqsave(&rh->region_lock, flags); + /* + * Possible cases: + * 1) DM_RH_DIRTY + * 2) DM_RH_NOSYNC: was dirty, other preceeding writes failed + * 3) DM_RH_RECOVERING: flushing pending writes + * Either case, the region should have not been connected to list. + */ + recovering = (reg->state == DM_RH_RECOVERING); + reg->state = DM_RH_NOSYNC; + BUG_ON(!list_empty(®->list)); + spin_unlock_irqrestore(&rh->region_lock, flags); + + bio_endio(bio, error); + if (recovering) + complete_resync_work(reg, 0); +} +EXPORT_SYMBOL_GPL(dm_rh_mark_nosync); + +void dm_rh_update_states(struct dm_region_hash *rh, int errors_handled) +{ + struct dm_region *reg, *next; + + LIST_HEAD(clean); + LIST_HEAD(recovered); + LIST_HEAD(failed_recovered); + + /* + * Quickly grab the lists. + */ + write_lock_irq(&rh->hash_lock); + spin_lock(&rh->region_lock); + if (!list_empty(&rh->clean_regions)) { + list_splice_init(&rh->clean_regions, &clean); + + list_for_each_entry(reg, &clean, list) + list_del(®->hash_list); + } + + if (!list_empty(&rh->recovered_regions)) { + list_splice_init(&rh->recovered_regions, &recovered); + + list_for_each_entry(reg, &recovered, list) + list_del(®->hash_list); + } + + if (!list_empty(&rh->failed_recovered_regions)) { + list_splice_init(&rh->failed_recovered_regions, + &failed_recovered); + + list_for_each_entry(reg, &failed_recovered, list) + list_del(®->hash_list); + } + + spin_unlock(&rh->region_lock); + write_unlock_irq(&rh->hash_lock); + + /* + * All the regions on the recovered and clean lists have + * now been pulled out of the system, so no need to do + * any more locking. + */ + list_for_each_entry_safe(reg, next, &recovered, list) { + rh->log->type->clear_region(rh->log, reg->key); + complete_resync_work(reg, 1); + mempool_free(reg, rh->region_pool); + } + + list_for_each_entry_safe(reg, next, &failed_recovered, list) { + complete_resync_work(reg, errors_handled ? 0 : 1); + mempool_free(reg, rh->region_pool); + } + + list_for_each_entry_safe(reg, next, &clean, list) { + rh->log->type->clear_region(rh->log, reg->key); + mempool_free(reg, rh->region_pool); + } + + rh->log->type->flush(rh->log); +} +EXPORT_SYMBOL_GPL(dm_rh_update_states); + +static void rh_inc(struct dm_region_hash *rh, region_t region) +{ + struct dm_region *reg; + + read_lock(&rh->hash_lock); + reg = __rh_find(rh, region); + + spin_lock_irq(&rh->region_lock); + atomic_inc(®->pending); + + if (reg->state == DM_RH_CLEAN) { + reg->state = DM_RH_DIRTY; + list_del_init(®->list); /* take off the clean list */ + spin_unlock_irq(&rh->region_lock); + + rh->log->type->mark_region(rh->log, reg->key); + } else + spin_unlock_irq(&rh->region_lock); + + + read_unlock(&rh->hash_lock); +} + +void dm_rh_inc_pending(struct dm_region_hash *rh, struct bio_list *bios) +{ + struct bio *bio; + + for (bio = bios->head; bio; bio = bio->bi_next) + rh_inc(rh, dm_rh_bio_to_region(rh, bio)); +} +EXPORT_SYMBOL_GPL(dm_rh_inc_pending); + +void dm_rh_dec(struct dm_region_hash *rh, region_t region) +{ + unsigned long flags; + struct dm_region *reg; + int should_wake = 0; + + read_lock(&rh->hash_lock); + reg = __rh_lookup(rh, region); + read_unlock(&rh->hash_lock); + + spin_lock_irqsave(&rh->region_lock, flags); + if (atomic_dec_and_test(®->pending)) { + /* + * There is no pending I/O for this region. + * We can move the region to corresponding list for next action. + * At this point, the region is not yet connected to any list. + * + * If the state is DM_RH_NOSYNC, the region should be kept off + * from clean list. + * The hash entry for DM_RH_NOSYNC will remain in memory + * until the region is recovered or the map is reloaded. + */ + + /* do nothing for DM_RH_NOSYNC */ + if (reg->state == DM_RH_RECOVERING) { + list_add_tail(®->list, &rh->quiesced_regions); + } else if (reg->state == DM_RH_DIRTY) { + reg->state = DM_RH_CLEAN; + list_add(®->list, &rh->clean_regions); + } + should_wake = 1; + } + spin_unlock_irqrestore(&rh->region_lock, flags); + + if (should_wake) + rh->wakeup_workers(rh->context); +} +EXPORT_SYMBOL_GPL(dm_rh_dec); + +/* + * Starts quiescing a region in preparation for recovery. + */ +static int __rh_recovery_prepare(struct dm_region_hash *rh) +{ + int r; + region_t region; + struct dm_region *reg; + + /* + * Ask the dirty log what's next. + */ + r = rh->log->type->get_resync_work(rh->log, ®ion); + if (r <= 0) + return r; + + /* + * Get this region, and start it quiescing by setting the + * recovering flag. + */ + read_lock(&rh->hash_lock); + reg = __rh_find(rh, region); + read_unlock(&rh->hash_lock); + + spin_lock_irq(&rh->region_lock); + reg->state = DM_RH_RECOVERING; + + /* Already quiesced ? */ + if (atomic_read(®->pending)) + list_del_init(®->list); + else + list_move(®->list, &rh->quiesced_regions); + + spin_unlock_irq(&rh->region_lock); + + return 1; +} + +void dm_rh_recovery_prepare(struct dm_region_hash *rh) +{ + /* Extra reference to avoid race with dm_rh_stop_recovery */ + atomic_inc(&rh->recovery_in_flight); + + while (!down_trylock(&rh->recovery_count)) { + atomic_inc(&rh->recovery_in_flight); + if (__rh_recovery_prepare(rh) <= 0) { + atomic_dec(&rh->recovery_in_flight); + up(&rh->recovery_count); + break; + } + } + + /* Drop the extra reference */ + if (atomic_dec_and_test(&rh->recovery_in_flight)) + rh->wakeup_all_recovery_waiters(rh->context); +} +EXPORT_SYMBOL_GPL(dm_rh_recovery_prepare); + +/* + * Returns any quiesced regions. + */ +struct dm_region *dm_rh_recovery_start(struct dm_region_hash *rh) +{ + struct dm_region *reg = NULL; + + spin_lock_irq(&rh->region_lock); + if (!list_empty(&rh->quiesced_regions)) { + reg = list_entry(rh->quiesced_regions.next, + struct dm_region, list); + list_del_init(®->list); /* remove from the quiesced list */ + } + spin_unlock_irq(&rh->region_lock); + + return reg; +} +EXPORT_SYMBOL_GPL(dm_rh_recovery_start); + +void dm_rh_recovery_end(struct dm_region *reg, int success) +{ + struct dm_region_hash *rh = reg->rh; + + spin_lock_irq(&rh->region_lock); + if (success) + list_add(®->list, ®->rh->recovered_regions); + else { + reg->state = DM_RH_NOSYNC; + list_add(®->list, ®->rh->failed_recovered_regions); + } + spin_unlock_irq(&rh->region_lock); + + rh->wakeup_workers(rh->context); +} +EXPORT_SYMBOL_GPL(dm_rh_recovery_end); + +/* Return recovery in flight count. */ +int dm_rh_recovery_in_flight(struct dm_region_hash *rh) +{ + return atomic_read(&rh->recovery_in_flight); +} +EXPORT_SYMBOL_GPL(dm_rh_recovery_in_flight); + +int dm_rh_flush(struct dm_region_hash *rh) +{ + return rh->log->type->flush(rh->log); +} +EXPORT_SYMBOL_GPL(dm_rh_flush); + +void dm_rh_delay(struct dm_region_hash *rh, struct bio *bio) +{ + struct dm_region *reg; + + read_lock(&rh->hash_lock); + reg = __rh_find(rh, dm_rh_bio_to_region(rh, bio)); + bio_list_add(®->delayed_bios, bio); + read_unlock(&rh->hash_lock); +} +EXPORT_SYMBOL_GPL(dm_rh_delay); + +void dm_rh_stop_recovery(struct dm_region_hash *rh) +{ + int i; + + /* wait for any recovering regions */ + for (i = 0; i < rh->max_recovery; i++) + down(&rh->recovery_count); +} +EXPORT_SYMBOL_GPL(dm_rh_stop_recovery); + +void dm_rh_start_recovery(struct dm_region_hash *rh) +{ + int i; + + for (i = 0; i < rh->max_recovery; i++) + up(&rh->recovery_count); + + rh->wakeup_workers(rh->context); +} +EXPORT_SYMBOL_GPL(dm_rh_start_recovery); + +MODULE_DESCRIPTION(DM_NAME " region hash"); +MODULE_AUTHOR("Joe Thornber/Heinz Mauelshagen <dm-devel@redhat.com>"); +MODULE_LICENSE("GPL"); diff --git a/drivers/md/dm-round-robin.c b/drivers/md/dm-round-robin.c index 391dfa2ad434..cdfbf65b28cb 100644 --- a/drivers/md/dm-round-robin.c +++ b/drivers/md/dm-round-robin.c @@ -9,7 +9,8 @@ * Round-robin path selector. */ -#include "dm.h" +#include <linux/device-mapper.h> + #include "dm-path-selector.h" #include <linux/slab.h> diff --git a/drivers/md/dm-snap.c b/drivers/md/dm-snap.c index 6e5528aecc98..b2d9d1ac28ad 100644 --- a/drivers/md/dm-snap.c +++ b/drivers/md/dm-snap.c @@ -600,7 +600,6 @@ static int snapshot_ctr(struct dm_target *ti, unsigned int argc, char **argv) s->valid = 1; s->active = 0; - s->last_percent = 0; init_rwsem(&s->lock); spin_lock_init(&s->pe_lock); s->ti = ti; @@ -824,8 +823,10 @@ static struct bio *put_pending_exception(struct dm_snap_pending_exception *pe) * the bios for the original write to the origin. */ if (primary_pe && - atomic_dec_and_test(&primary_pe->ref_count)) + atomic_dec_and_test(&primary_pe->ref_count)) { origin_bios = bio_list_get(&primary_pe->origin_bios); + free_pending_exception(primary_pe); + } /* * Free the pe if it's not linked to an origin write or if @@ -834,12 +835,6 @@ static struct bio *put_pending_exception(struct dm_snap_pending_exception *pe) if (!primary_pe || primary_pe != pe) free_pending_exception(pe); - /* - * Free the primary pe if nothing references it. - */ - if (primary_pe && !atomic_read(&primary_pe->ref_count)) - free_pending_exception(primary_pe); - return origin_bios; } diff --git a/drivers/md/dm-snap.h b/drivers/md/dm-snap.h index 292c15609ae3..f07315fe2362 100644 --- a/drivers/md/dm-snap.h +++ b/drivers/md/dm-snap.h @@ -9,7 +9,7 @@ #ifndef DM_SNAPSHOT_H #define DM_SNAPSHOT_H -#include "dm.h" +#include <linux/device-mapper.h> #include "dm-bio-list.h" #include <linux/blkdev.h> #include <linux/workqueue.h> @@ -158,9 +158,6 @@ struct dm_snapshot { /* Used for display of table */ char type; - /* The last percentage we notified */ - int last_percent; - mempool_t *pending_pool; struct exception_table pending; diff --git a/drivers/md/dm-stripe.c b/drivers/md/dm-stripe.c index b745d8ac625b..a2d068dbe9e2 100644 --- a/drivers/md/dm-stripe.c +++ b/drivers/md/dm-stripe.c @@ -4,7 +4,7 @@ * This file is released under the GPL. */ -#include "dm.h" +#include <linux/device-mapper.h> #include <linux/module.h> #include <linux/init.h> @@ -60,8 +60,8 @@ static inline struct stripe_c *alloc_context(unsigned int stripes) { size_t len; - if (array_too_big(sizeof(struct stripe_c), sizeof(struct stripe), - stripes)) + if (dm_array_too_big(sizeof(struct stripe_c), sizeof(struct stripe), + stripes)) return NULL; len = sizeof(struct stripe_c) + (sizeof(struct stripe) * stripes); diff --git a/drivers/md/dm-zero.c b/drivers/md/dm-zero.c index bdec206c404b..cdbf126ec106 100644 --- a/drivers/md/dm-zero.c +++ b/drivers/md/dm-zero.c @@ -4,7 +4,7 @@ * This file is released under the GPL. */ -#include "dm.h" +#include <linux/device-mapper.h> #include <linux/module.h> #include <linux/init.h> diff --git a/drivers/md/dm.c b/drivers/md/dm.c index 327de03a5bdf..d1d0cd0f5750 100644 --- a/drivers/md/dm.c +++ b/drivers/md/dm.c @@ -76,7 +76,6 @@ union map_info *dm_get_mapinfo(struct bio *bio) */ struct dm_wq_req { enum { - DM_WQ_FLUSH_ALL, DM_WQ_FLUSH_DEFERRED, } type; struct work_struct work; @@ -151,40 +150,40 @@ static struct kmem_cache *_tio_cache; static int __init local_init(void) { - int r; + int r = -ENOMEM; /* allocate a slab for the dm_ios */ _io_cache = KMEM_CACHE(dm_io, 0); if (!_io_cache) - return -ENOMEM; + return r; /* allocate a slab for the target ios */ _tio_cache = KMEM_CACHE(dm_target_io, 0); - if (!_tio_cache) { - kmem_cache_destroy(_io_cache); - return -ENOMEM; - } + if (!_tio_cache) + goto out_free_io_cache; r = dm_uevent_init(); - if (r) { - kmem_cache_destroy(_tio_cache); - kmem_cache_destroy(_io_cache); - return r; - } + if (r) + goto out_free_tio_cache; _major = major; r = register_blkdev(_major, _name); - if (r < 0) { - kmem_cache_destroy(_tio_cache); - kmem_cache_destroy(_io_cache); - dm_uevent_exit(); - return r; - } + if (r < 0) + goto out_uevent_exit; if (!_major) _major = r; return 0; + +out_uevent_exit: + dm_uevent_exit(); +out_free_tio_cache: + kmem_cache_destroy(_tio_cache); +out_free_io_cache: + kmem_cache_destroy(_io_cache); + + return r; } static void local_exit(void) @@ -669,6 +668,7 @@ static struct bio *split_bvec(struct bio *bio, sector_t sector, clone->bi_size = to_bytes(len); clone->bi_io_vec->bv_offset = offset; clone->bi_io_vec->bv_len = clone->bi_size; + clone->bi_flags |= 1 << BIO_CLONED; return clone; } @@ -1394,9 +1394,6 @@ static void dm_wq_work(struct work_struct *work) down_write(&md->io_lock); switch (req->type) { - case DM_WQ_FLUSH_ALL: - __merge_pushback_list(md); - /* pass through */ case DM_WQ_FLUSH_DEFERRED: __flush_deferred_io(md); break; @@ -1526,7 +1523,7 @@ int dm_suspend(struct mapped_device *md, unsigned suspend_flags) if (!md->suspended_bdev) { DMWARN("bdget failed in dm_suspend"); r = -ENOMEM; - goto flush_and_out; + goto out; } /* @@ -1577,14 +1574,6 @@ int dm_suspend(struct mapped_device *md, unsigned suspend_flags) set_bit(DMF_SUSPENDED, &md->flags); -flush_and_out: - if (r && noflush) - /* - * Because there may be already I/Os in the pushback list, - * flush them before return. - */ - dm_queue_flush(md, DM_WQ_FLUSH_ALL, NULL); - out: if (r && md->suspended_bdev) { bdput(md->suspended_bdev); diff --git a/drivers/md/dm.h b/drivers/md/dm.h index cd189da2b2fa..0ade60cdef42 100644 --- a/drivers/md/dm.h +++ b/drivers/md/dm.h @@ -62,15 +62,6 @@ void dm_put_target_type(struct target_type *t); int dm_target_iterate(void (*iter_func)(struct target_type *tt, void *param), void *param); -/*----------------------------------------------------------------- - * Useful inlines. - *---------------------------------------------------------------*/ -static inline int array_too_big(unsigned long fixed, unsigned long obj, - unsigned long num) -{ - return (num > (ULONG_MAX - fixed) / obj); -} - int dm_split_args(int *argc, char ***argvp, char *input); /* diff --git a/drivers/media/common/saa7146_fops.c b/drivers/media/common/saa7146_fops.c index 5b34c134aa25..127b0526a727 100644 --- a/drivers/media/common/saa7146_fops.c +++ b/drivers/media/common/saa7146_fops.c @@ -545,11 +545,11 @@ int saa7146_register_device(struct video_device **vid, struct saa7146_dev* dev, if( VFL_TYPE_GRABBER == type ) { vv->video_minor = vfd->minor; INFO(("%s: registered device video%d [v4l2]\n", - dev->name, vfd->minor & 0x1f)); + dev->name, vfd->num)); } else { vv->vbi_minor = vfd->minor; INFO(("%s: registered device vbi%d [v4l2]\n", - dev->name, vfd->minor & 0x1f)); + dev->name, vfd->num)); } *vid = vfd; diff --git a/drivers/media/common/saa7146_video.c b/drivers/media/common/saa7146_video.c index 99be9e5c85f7..fe0bd55977e3 100644 --- a/drivers/media/common/saa7146_video.c +++ b/drivers/media/common/saa7146_video.c @@ -834,7 +834,7 @@ static int video_end(struct saa7146_fh *fh, struct file *file) * copying is done already, arg is a kernel pointer. */ -int saa7146_video_do_ioctl(struct inode *inode, struct file *file, unsigned int cmd, void *arg) +static int __saa7146_video_do_ioctl(struct file *file, unsigned int cmd, void *arg) { struct saa7146_fh *fh = file->private_data; struct saa7146_dev *dev = fh->dev; @@ -1215,12 +1215,18 @@ int saa7146_video_do_ioctl(struct inode *inode, struct file *file, unsigned int } #endif default: - return v4l_compat_translate_ioctl(inode,file,cmd,arg, - saa7146_video_do_ioctl); + return v4l_compat_translate_ioctl(file, cmd, arg, + __saa7146_video_do_ioctl); } return 0; } +int saa7146_video_do_ioctl(struct inode *inode, struct file *file, + unsigned int cmd, void *arg) +{ + return __saa7146_video_do_ioctl(file, cmd, arg); +} + /*********************************************************************************/ /* buffer handling functions */ diff --git a/drivers/media/dvb/frontends/s5h1411.c b/drivers/media/dvb/frontends/s5h1411.c index 2febfb5a846b..40644aacffcb 100644 --- a/drivers/media/dvb/frontends/s5h1411.c +++ b/drivers/media/dvb/frontends/s5h1411.c @@ -38,6 +38,7 @@ struct s5h1411_state { struct dvb_frontend frontend; fe_modulation_t current_modulation; + unsigned int first_tune:1; u32 current_frequency; int if_freq; @@ -62,7 +63,7 @@ static struct init_tab { { S5H1411_I2C_TOP_ADDR, 0x08, 0x0047, }, { S5H1411_I2C_TOP_ADDR, 0x1c, 0x0400, }, { S5H1411_I2C_TOP_ADDR, 0x1e, 0x0370, }, - { S5H1411_I2C_TOP_ADDR, 0x1f, 0x342a, }, + { S5H1411_I2C_TOP_ADDR, 0x1f, 0x342c, }, { S5H1411_I2C_TOP_ADDR, 0x24, 0x0231, }, { S5H1411_I2C_TOP_ADDR, 0x25, 0x1011, }, { S5H1411_I2C_TOP_ADDR, 0x26, 0x0f07, }, @@ -100,7 +101,6 @@ static struct init_tab { { S5H1411_I2C_TOP_ADDR, 0x78, 0x3141, }, { S5H1411_I2C_TOP_ADDR, 0x7a, 0x3141, }, { S5H1411_I2C_TOP_ADDR, 0xb3, 0x8003, }, - { S5H1411_I2C_TOP_ADDR, 0xb5, 0xafbb, }, { S5H1411_I2C_TOP_ADDR, 0xb5, 0xa6bb, }, { S5H1411_I2C_TOP_ADDR, 0xb6, 0x0609, }, { S5H1411_I2C_TOP_ADDR, 0xb7, 0x2f06, }, @@ -393,7 +393,7 @@ static int s5h1411_set_if_freq(struct dvb_frontend *fe, int KHz) switch (KHz) { case 3250: - s5h1411_writereg(state, S5H1411_I2C_TOP_ADDR, 0x38, 0x10d9); + s5h1411_writereg(state, S5H1411_I2C_TOP_ADDR, 0x38, 0x10d5); s5h1411_writereg(state, S5H1411_I2C_TOP_ADDR, 0x39, 0x5342); s5h1411_writereg(state, S5H1411_I2C_QAM_ADDR, 0x2c, 0x10d9); break; @@ -464,13 +464,25 @@ static int s5h1411_set_spectralinversion(struct dvb_frontend *fe, int inversion) if (inversion == 1) val |= 0x1000; /* Inverted */ - else - val |= 0x0000; state->inversion = inversion; return s5h1411_writereg(state, S5H1411_I2C_TOP_ADDR, 0x24, val); } +static int s5h1411_set_serialmode(struct dvb_frontend *fe, int serial) +{ + struct s5h1411_state *state = fe->demodulator_priv; + u16 val; + + dprintk("%s(%d)\n", __func__, serial); + val = s5h1411_readreg(state, S5H1411_I2C_TOP_ADDR, 0xbd) & ~0x100; + + if (serial == 1) + val |= 0x100; + + return s5h1411_writereg(state, S5H1411_I2C_TOP_ADDR, 0xbd, val); +} + static int s5h1411_enable_modulation(struct dvb_frontend *fe, fe_modulation_t m) { @@ -478,6 +490,12 @@ static int s5h1411_enable_modulation(struct dvb_frontend *fe, dprintk("%s(0x%08x)\n", __func__, m); + if ((state->first_tune == 0) && (m == state->current_modulation)) { + dprintk("%s() Already at desired modulation. Skipping...\n", + __func__); + return 0; + } + switch (m) { case VSB_8: dprintk("%s() VSB_8\n", __func__); @@ -502,6 +520,7 @@ static int s5h1411_enable_modulation(struct dvb_frontend *fe, } state->current_modulation = m; + state->first_tune = 0; s5h1411_softreset(fe); return 0; @@ -535,7 +554,7 @@ static int s5h1411_set_gpio(struct dvb_frontend *fe, int enable) return s5h1411_writereg(state, S5H1411_I2C_TOP_ADDR, 0xe0, val); } -static int s5h1411_sleep(struct dvb_frontend *fe, int enable) +static int s5h1411_set_powerstate(struct dvb_frontend *fe, int enable) { struct s5h1411_state *state = fe->demodulator_priv; @@ -551,6 +570,11 @@ static int s5h1411_sleep(struct dvb_frontend *fe, int enable) return 0; } +static int s5h1411_sleep(struct dvb_frontend *fe) +{ + return s5h1411_set_powerstate(fe, 1); +} + static int s5h1411_register_reset(struct dvb_frontend *fe) { struct s5h1411_state *state = fe->demodulator_priv; @@ -574,9 +598,6 @@ static int s5h1411_set_frontend(struct dvb_frontend *fe, s5h1411_enable_modulation(fe, p->u.vsb.modulation); - /* Allow the demod to settle */ - msleep(100); - if (fe->ops.tuner_ops.set_params) { if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 1); @@ -587,6 +608,10 @@ static int s5h1411_set_frontend(struct dvb_frontend *fe, fe->ops.i2c_gate_ctrl(fe, 0); } + /* Issue a reset to the demod so it knows to resync against the + newly tuned frequency */ + s5h1411_softreset(fe); + return 0; } @@ -599,7 +624,7 @@ static int s5h1411_init(struct dvb_frontend *fe) dprintk("%s()\n", __func__); - s5h1411_sleep(fe, 0); + s5h1411_set_powerstate(fe, 0); s5h1411_register_reset(fe); for (i = 0; i < ARRAY_SIZE(init_tab); i++) @@ -610,12 +635,17 @@ static int s5h1411_init(struct dvb_frontend *fe) /* The datasheet says that after initialisation, VSB is default */ state->current_modulation = VSB_8; + /* Although the datasheet says it's in VSB, empirical evidence + shows problems getting lock on the first tuning request. Make + sure we call enable_modulation the first time around */ + state->first_tune = 1; + if (state->config->output_mode == S5H1411_SERIAL_OUTPUT) /* Serial */ - s5h1411_writereg(state, S5H1411_I2C_TOP_ADDR, 0xbd, 0x1101); + s5h1411_set_serialmode(fe, 1); else /* Parallel */ - s5h1411_writereg(state, S5H1411_I2C_TOP_ADDR, 0xbd, 0x1001); + s5h1411_set_serialmode(fe, 0); s5h1411_set_spectralinversion(fe, state->config->inversion); s5h1411_set_if_freq(fe, state->config->vsb_if); @@ -637,28 +667,29 @@ static int s5h1411_read_status(struct dvb_frontend *fe, fe_status_t *status) *status = 0; - /* Get the demodulator status */ - reg = (s5h1411_readreg(state, S5H1411_I2C_TOP_ADDR, 0xf2) >> 15) - & 0x0001; - if (reg) - *status |= FE_HAS_LOCK | FE_HAS_CARRIER | FE_HAS_SIGNAL; + /* Register F2 bit 15 = Master Lock, removed */ switch (state->current_modulation) { case QAM_64: case QAM_256: reg = s5h1411_readreg(state, S5H1411_I2C_TOP_ADDR, 0xf0); - if (reg & 0x100) - *status |= FE_HAS_VITERBI; - if (reg & 0x10) - *status |= FE_HAS_SYNC; + if (reg & 0x10) /* QAM FEC Lock */ + *status |= FE_HAS_SYNC | FE_HAS_LOCK; + if (reg & 0x100) /* QAM EQ Lock */ + *status |= FE_HAS_VITERBI | FE_HAS_CARRIER | FE_HAS_SIGNAL; + break; case VSB_8: - reg = s5h1411_readreg(state, S5H1411_I2C_TOP_ADDR, 0x5e); - if (reg & 0x0001) - *status |= FE_HAS_SYNC; reg = s5h1411_readreg(state, S5H1411_I2C_TOP_ADDR, 0xf2); - if (reg & 0x1000) - *status |= FE_HAS_VITERBI; + if (reg & 0x1000) /* FEC Lock */ + *status |= FE_HAS_SYNC | FE_HAS_LOCK; + if (reg & 0x2000) /* EQ Lock */ + *status |= FE_HAS_VITERBI | FE_HAS_CARRIER | FE_HAS_SIGNAL; + + reg = s5h1411_readreg(state, S5H1411_I2C_TOP_ADDR, 0x53); + if (reg & 0x1) /* AFC Lock */ + *status |= FE_HAS_SIGNAL; + break; default: return -EINVAL; @@ -863,6 +894,7 @@ static struct dvb_frontend_ops s5h1411_ops = { }, .init = s5h1411_init, + .sleep = s5h1411_sleep, .i2c_gate_ctrl = s5h1411_i2c_gate_ctrl, .set_frontend = s5h1411_set_frontend, .get_frontend = s5h1411_get_frontend, diff --git a/drivers/media/dvb/frontends/s5h1411.h b/drivers/media/dvb/frontends/s5h1411.h index 7d542bc00c48..45ec0f82989c 100644 --- a/drivers/media/dvb/frontends/s5h1411.h +++ b/drivers/media/dvb/frontends/s5h1411.h @@ -47,7 +47,7 @@ struct s5h1411_config { u16 mpeg_timing; /* IF Freq for QAM and VSB in KHz */ -#define S5H1411_IF_2500 2500 +#define S5H1411_IF_3250 3250 #define S5H1411_IF_3500 3500 #define S5H1411_IF_4000 4000 #define S5H1411_IF_5380 5380 diff --git a/drivers/media/radio/dsbr100.c b/drivers/media/radio/dsbr100.c index 78f56944e640..a5ca176a7b08 100644 --- a/drivers/media/radio/dsbr100.c +++ b/drivers/media/radio/dsbr100.c @@ -171,11 +171,11 @@ static int dsbr100_start(struct dsbr100_device *radio) if (usb_control_msg(radio->usbdev, usb_rcvctrlpipe(radio->usbdev, 0), USB_REQ_GET_STATUS, USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN, - 0x00, 0xC7, radio->transfer_buffer, 8, 300)<0 || + 0x00, 0xC7, radio->transfer_buffer, 8, 300) < 0 || usb_control_msg(radio->usbdev, usb_rcvctrlpipe(radio->usbdev, 0), DSB100_ONOFF, USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN, - 0x01, 0x00, radio->transfer_buffer, 8, 300)<0) + 0x01, 0x00, radio->transfer_buffer, 8, 300) < 0) return -1; radio->muted=0; return (radio->transfer_buffer)[0]; @@ -188,11 +188,11 @@ static int dsbr100_stop(struct dsbr100_device *radio) if (usb_control_msg(radio->usbdev, usb_rcvctrlpipe(radio->usbdev, 0), USB_REQ_GET_STATUS, USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN, - 0x16, 0x1C, radio->transfer_buffer, 8, 300)<0 || + 0x16, 0x1C, radio->transfer_buffer, 8, 300) < 0 || usb_control_msg(radio->usbdev, usb_rcvctrlpipe(radio->usbdev, 0), DSB100_ONOFF, USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN, - 0x00, 0x00, radio->transfer_buffer, 8, 300)<0) + 0x00, 0x00, radio->transfer_buffer, 8, 300) < 0) return -1; radio->muted=1; return (radio->transfer_buffer)[0]; @@ -201,24 +201,24 @@ static int dsbr100_stop(struct dsbr100_device *radio) /* set a frequency, freq is defined by v4l's TUNER_LOW, i.e. 1/16th kHz */ static int dsbr100_setfreq(struct dsbr100_device *radio, int freq) { - freq = (freq/16*80)/1000+856; + freq = (freq / 16 * 80) / 1000 + 856; if (usb_control_msg(radio->usbdev, usb_rcvctrlpipe(radio->usbdev, 0), DSB100_TUNE, USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN, - (freq>>8)&0x00ff, freq&0xff, - radio->transfer_buffer, 8, 300)<0 || + (freq >> 8) & 0x00ff, freq & 0xff, + radio->transfer_buffer, 8, 300) < 0 || usb_control_msg(radio->usbdev, usb_rcvctrlpipe(radio->usbdev, 0), USB_REQ_GET_STATUS, USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN, - 0x96, 0xB7, radio->transfer_buffer, 8, 300)<0 || + 0x96, 0xB7, radio->transfer_buffer, 8, 300) < 0 || usb_control_msg(radio->usbdev, usb_rcvctrlpipe(radio->usbdev, 0), USB_REQ_GET_STATUS, USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN, - 0x00, 0x24, radio->transfer_buffer, 8, 300)<0) { + 0x00, 0x24, radio->transfer_buffer, 8, 300) < 0) { radio->stereo = -1; return -1; } - radio->stereo = ! ((radio->transfer_buffer)[0]&0x01); + radio->stereo = !((radio->transfer_buffer)[0] & 0x01); return (radio->transfer_buffer)[0]; } @@ -229,10 +229,10 @@ static void dsbr100_getstat(struct dsbr100_device *radio) if (usb_control_msg(radio->usbdev, usb_rcvctrlpipe(radio->usbdev, 0), USB_REQ_GET_STATUS, USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN, - 0x00 , 0x24, radio->transfer_buffer, 8, 300)<0) + 0x00 , 0x24, radio->transfer_buffer, 8, 300) < 0) radio->stereo = -1; else - radio->stereo = ! (radio->transfer_buffer[0]&0x01); + radio->stereo = !(radio->transfer_buffer[0] & 0x01); } @@ -265,7 +265,7 @@ static int vidioc_querycap(struct file *file, void *priv, { strlcpy(v->driver, "dsbr100", sizeof(v->driver)); strlcpy(v->card, "D-Link R-100 USB FM Radio", sizeof(v->card)); - sprintf(v->bus_info, "ISA"); + sprintf(v->bus_info, "USB"); v->version = RADIO_VERSION; v->capabilities = V4L2_CAP_TUNER; return 0; @@ -282,9 +282,9 @@ static int vidioc_g_tuner(struct file *file, void *priv, dsbr100_getstat(radio); strcpy(v->name, "FM"); v->type = V4L2_TUNER_RADIO; - v->rangelow = FREQ_MIN*FREQ_MUL; - v->rangehigh = FREQ_MAX*FREQ_MUL; - v->rxsubchans = V4L2_TUNER_SUB_MONO|V4L2_TUNER_SUB_STEREO; + v->rangelow = FREQ_MIN * FREQ_MUL; + v->rangehigh = FREQ_MAX * FREQ_MUL; + v->rxsubchans = V4L2_TUNER_SUB_MONO | V4L2_TUNER_SUB_STEREO; v->capability = V4L2_TUNER_CAP_LOW; if(radio->stereo) v->audmode = V4L2_TUNER_MODE_STEREO; @@ -309,7 +309,7 @@ static int vidioc_s_frequency(struct file *file, void *priv, struct dsbr100_device *radio = video_drvdata(file); radio->curfreq = f->frequency; - if (dsbr100_setfreq(radio, radio->curfreq)==-1) + if (dsbr100_setfreq(radio, radio->curfreq) == -1) dev_warn(&radio->usbdev->dev, "Set frequency failed\n"); return 0; } @@ -331,8 +331,7 @@ static int vidioc_queryctrl(struct file *file, void *priv, for (i = 0; i < ARRAY_SIZE(radio_qctrl); i++) { if (qc->id && qc->id == radio_qctrl[i].id) { - memcpy(qc, &(radio_qctrl[i]), - sizeof(*qc)); + memcpy(qc, &(radio_qctrl[i]), sizeof(*qc)); return 0; } } @@ -412,19 +411,25 @@ static int vidioc_s_audio(struct file *file, void *priv, static int usb_dsbr100_open(struct inode *inode, struct file *file) { struct dsbr100_device *radio = video_drvdata(file); + int retval; lock_kernel(); radio->users = 1; radio->muted = 1; - if (dsbr100_start(radio)<0) { + if (dsbr100_start(radio) < 0) { dev_warn(&radio->usbdev->dev, "Radio did not start up properly\n"); radio->users = 0; unlock_kernel(); return -EIO; } - dsbr100_setfreq(radio, radio->curfreq); + + retval = dsbr100_setfreq(radio, radio->curfreq); + + if (retval == -1) + printk(KERN_WARNING KBUILD_MODNAME ": Set frequency failed\n"); + unlock_kernel(); return 0; } @@ -485,13 +490,20 @@ static int usb_dsbr100_probe(struct usb_interface *intf, { struct dsbr100_device *radio; - if (!(radio = kmalloc(sizeof(struct dsbr100_device), GFP_KERNEL))) + radio = kmalloc(sizeof(struct dsbr100_device), GFP_KERNEL); + + if (!radio) return -ENOMEM; - if (!(radio->transfer_buffer = kmalloc(TB_LEN, GFP_KERNEL))) { + + radio->transfer_buffer = kmalloc(TB_LEN, GFP_KERNEL); + + if (!(radio->transfer_buffer)) { kfree(radio); return -ENOMEM; } - if (!(radio->videodev = video_device_alloc())) { + radio->videodev = video_device_alloc(); + + if (!(radio->videodev)) { kfree(radio->transfer_buffer); kfree(radio); return -ENOMEM; @@ -501,7 +513,7 @@ static int usb_dsbr100_probe(struct usb_interface *intf, radio->removed = 0; radio->users = 0; radio->usbdev = interface_to_usbdev(intf); - radio->curfreq = FREQ_MIN*FREQ_MUL; + radio->curfreq = FREQ_MIN * FREQ_MUL; video_set_drvdata(radio->videodev, radio); if (video_register_device(radio->videodev, VFL_TYPE_RADIO, radio_nr) < 0) { dev_warn(&intf->dev, "Could not register video device\n"); diff --git a/drivers/media/radio/radio-mr800.c b/drivers/media/radio/radio-mr800.c index a33717c48003..256cbeffdcb6 100644 --- a/drivers/media/radio/radio-mr800.c +++ b/drivers/media/radio/radio-mr800.c @@ -469,16 +469,21 @@ static int usb_amradio_open(struct inode *inode, struct file *file) { struct amradio_device *radio = video_get_drvdata(video_devdata(file)); + lock_kernel(); + radio->users = 1; radio->muted = 1; if (amradio_start(radio) < 0) { warn("Radio did not start up properly"); radio->users = 0; + unlock_kernel(); return -EIO; } if (amradio_setfreq(radio, radio->curfreq) < 0) warn("Set frequency failed"); + + unlock_kernel(); return 0; } diff --git a/drivers/media/video/arv.c b/drivers/media/video/arv.c index 218754b4906a..e09b00693230 100644 --- a/drivers/media/video/arv.c +++ b/drivers/media/video/arv.c @@ -866,7 +866,7 @@ static int __init ar_init(void) } printk("video%d: Found M64278 VGA (IRQ %d, Freq %dMHz).\n", - ar->vdev->minor, M32R_IRQ_INT3, freq); + ar->vdev->num, M32R_IRQ_INT3, freq); return 0; diff --git a/drivers/media/video/bt8xx/bttv-driver.c b/drivers/media/video/bt8xx/bttv-driver.c index 5858bf5ff41c..9ec4cec2e52d 100644 --- a/drivers/media/video/bt8xx/bttv-driver.c +++ b/drivers/media/video/bt8xx/bttv-driver.c @@ -4246,7 +4246,7 @@ static int __devinit bttv_register_video(struct bttv *btv) video_nr[btv->c.nr]) < 0) goto err; printk(KERN_INFO "bttv%d: registered device video%d\n", - btv->c.nr,btv->video_dev->minor & 0x1f); + btv->c.nr, btv->video_dev->num); if (device_create_file(&btv->video_dev->dev, &dev_attr_card)<0) { printk(KERN_ERR "bttv%d: device_create_file 'card' " @@ -4263,7 +4263,7 @@ static int __devinit bttv_register_video(struct bttv *btv) vbi_nr[btv->c.nr]) < 0) goto err; printk(KERN_INFO "bttv%d: registered device vbi%d\n", - btv->c.nr,btv->vbi_dev->minor & 0x1f); + btv->c.nr, btv->vbi_dev->num); if (!btv->has_radio) return 0; @@ -4275,7 +4275,7 @@ static int __devinit bttv_register_video(struct bttv *btv) radio_nr[btv->c.nr]) < 0) goto err; printk(KERN_INFO "bttv%d: registered device radio%d\n", - btv->c.nr,btv->radio_dev->minor & 0x1f); + btv->c.nr, btv->radio_dev->num); /* all done */ return 0; diff --git a/drivers/media/video/c-qcam.c b/drivers/media/video/c-qcam.c index 17aa0adb3467..0f930d351466 100644 --- a/drivers/media/video/c-qcam.c +++ b/drivers/media/video/c-qcam.c @@ -815,7 +815,7 @@ static int init_cqcam(struct parport *port) } printk(KERN_INFO "video%d: Colour QuickCam found on %s\n", - qcam->vdev.minor, qcam->pport->name); + qcam->vdev.num, qcam->pport->name); qcams[num_cams++] = qcam; diff --git a/drivers/media/video/cafe_ccic.c b/drivers/media/video/cafe_ccic.c index fc9497bdd322..a8c068e1de1c 100644 --- a/drivers/media/video/cafe_ccic.c +++ b/drivers/media/video/cafe_ccic.c @@ -2059,10 +2059,10 @@ static void cafe_dfs_cam_setup(struct cafe_camera *cam) if (!cafe_dfs_root) return; - sprintf(fname, "regs-%d", cam->v4ldev.minor); + sprintf(fname, "regs-%d", cam->v4ldev.num); cam->dfs_regs = debugfs_create_file(fname, 0444, cafe_dfs_root, cam, &cafe_dfs_reg_ops); - sprintf(fname, "cam-%d", cam->v4ldev.minor); + sprintf(fname, "cam-%d", cam->v4ldev.num); cam->dfs_cam_regs = debugfs_create_file(fname, 0444, cafe_dfs_root, cam, &cafe_dfs_cam_ops); } diff --git a/drivers/media/video/cpia.c b/drivers/media/video/cpia.c index 1798b779a25a..16c094f77852 100644 --- a/drivers/media/video/cpia.c +++ b/drivers/media/video/cpia.c @@ -1347,7 +1347,7 @@ static void create_proc_cpia_cam(struct cam_data *cam) if (!cpia_proc_root || !cam) return; - snprintf(name, sizeof(name), "video%d", cam->vdev.minor); + snprintf(name, sizeof(name), "video%d", cam->vdev.num); ent = create_proc_entry(name, S_IFREG|S_IRUGO|S_IWUSR, cpia_proc_root); if (!ent) @@ -1372,7 +1372,7 @@ static void destroy_proc_cpia_cam(struct cam_data *cam) if (!cam || !cam->proc_entry) return; - snprintf(name, sizeof(name), "video%d", cam->vdev.minor); + snprintf(name, sizeof(name), "video%d", cam->vdev.num); remove_proc_entry(name, cpia_proc_root); cam->proc_entry = NULL; } @@ -4005,7 +4005,7 @@ void cpia_unregister_camera(struct cam_data *cam) } #ifdef CONFIG_PROC_FS - DBG("destroying /proc/cpia/video%d\n", cam->vdev.minor); + DBG("destroying /proc/cpia/video%d\n", cam->vdev.num); destroy_proc_cpia_cam(cam); #endif if (!cam->open_count) { diff --git a/drivers/media/video/cpia2/cpia2_v4l.c b/drivers/media/video/cpia2/cpia2_v4l.c index 897e8d1a5c3c..1c6bd633f193 100644 --- a/drivers/media/video/cpia2/cpia2_v4l.c +++ b/drivers/media/video/cpia2/cpia2_v4l.c @@ -1973,7 +1973,7 @@ void cpia2_unregister_camera(struct camera_data *cam) } else { LOG("/dev/video%d removed while open, " "deferring video_unregister_device\n", - cam->vdev->minor); + cam->vdev->num); } } diff --git a/drivers/media/video/cx18/cx18-driver.c b/drivers/media/video/cx18/cx18-driver.c index 085121c2b47f..7a1a7830a6b3 100644 --- a/drivers/media/video/cx18/cx18-driver.c +++ b/drivers/media/video/cx18/cx18-driver.c @@ -613,6 +613,7 @@ static int __devinit cx18_probe(struct pci_dev *dev, const struct pci_device_id *pci_id) { int retval = 0; + int i; int vbi_buf_size; u32 devtype; struct cx18 *cx; @@ -698,7 +699,8 @@ static int __devinit cx18_probe(struct pci_dev *dev, /* active i2c */ CX18_DEBUG_INFO("activating i2c...\n"); - if (init_cx18_i2c(cx)) { + retval = init_cx18_i2c(cx); + if (retval) { CX18_ERR("Could not initialize i2c\n"); goto free_map; } @@ -836,8 +838,11 @@ err: CX18_ERR("Error %d on initialization\n", retval); cx18_log_statistics(cx); - kfree(cx18_cards[cx18_cards_active]); - cx18_cards[cx18_cards_active] = NULL; + i = cx->num; + spin_lock(&cx18_cards_lock); + kfree(cx18_cards[i]); + cx18_cards[i] = NULL; + spin_unlock(&cx18_cards_lock); return retval; } diff --git a/drivers/media/video/cx18/cx18-io.h b/drivers/media/video/cx18/cx18-io.h index 197d4fbd9f95..287a5e8bf67b 100644 --- a/drivers/media/video/cx18/cx18-io.h +++ b/drivers/media/video/cx18/cx18-io.h @@ -39,7 +39,7 @@ static inline void cx18_io_delay(struct cx18 *cx) /* Statistics gathering */ static inline -void cx18_log_write_retries(struct cx18 *cx, int i, const void *addr) +void cx18_log_write_retries(struct cx18 *cx, int i, const void __iomem *addr) { if (i > CX18_MAX_MMIO_RETRIES) i = CX18_MAX_MMIO_RETRIES; @@ -48,7 +48,7 @@ void cx18_log_write_retries(struct cx18 *cx, int i, const void *addr) } static inline -void cx18_log_read_retries(struct cx18 *cx, int i, const void *addr) +void cx18_log_read_retries(struct cx18 *cx, int i, const void __iomem *addr) { if (i > CX18_MAX_MMIO_RETRIES) i = CX18_MAX_MMIO_RETRIES; diff --git a/drivers/media/video/cx18/cx18-streams.c b/drivers/media/video/cx18/cx18-streams.c index 0c8e7542cf60..e5ff7705b7a1 100644 --- a/drivers/media/video/cx18/cx18-streams.c +++ b/drivers/media/video/cx18/cx18-streams.c @@ -200,16 +200,18 @@ static int cx18_prep_dev(struct cx18 *cx, int type) /* Initialize v4l2 variables and register v4l2 devices */ int cx18_streams_setup(struct cx18 *cx) { - int type; + int type, ret; /* Setup V4L2 Devices */ for (type = 0; type < CX18_MAX_STREAMS; type++) { /* Prepare device */ - if (cx18_prep_dev(cx, type)) + ret = cx18_prep_dev(cx, type); + if (ret < 0) break; /* Allocate Stream */ - if (cx18_stream_alloc(&cx->streams[type])) + ret = cx18_stream_alloc(&cx->streams[type]); + if (ret < 0) break; } if (type == CX18_MAX_STREAMS) @@ -217,14 +219,14 @@ int cx18_streams_setup(struct cx18 *cx) /* One or more streams could not be initialized. Clean 'em all up. */ cx18_streams_cleanup(cx, 0); - return -ENOMEM; + return ret; } static int cx18_reg_dev(struct cx18 *cx, int type) { struct cx18_stream *s = &cx->streams[type]; int vfl_type = cx18_stream_info[type].vfl_type; - int num; + int num, ret; /* TODO: Shouldn't this be a VFL_TYPE_TRANSPORT or something? * We need a VFL_TYPE_TS defined. @@ -233,9 +235,10 @@ static int cx18_reg_dev(struct cx18 *cx, int type) /* just return if no DVB is supported */ if ((cx->card->hw_all & CX18_HW_DVB) == 0) return 0; - if (cx18_dvb_register(s) < 0) { + ret = cx18_dvb_register(s); + if (ret < 0) { CX18_ERR("DVB failed to register\n"); - return -EINVAL; + return ret; } } @@ -252,12 +255,13 @@ static int cx18_reg_dev(struct cx18 *cx, int type) } /* Register device. First try the desired minor, then any free one. */ - if (video_register_device(s->v4l2dev, vfl_type, num)) { + ret = video_register_device(s->v4l2dev, vfl_type, num); + if (ret < 0) { CX18_ERR("Couldn't register v4l2 device for %s kernel number %d\n", s->name, num); video_device_release(s->v4l2dev); s->v4l2dev = NULL; - return -ENOMEM; + return ret; } num = s->v4l2dev->num; @@ -290,18 +294,22 @@ static int cx18_reg_dev(struct cx18 *cx, int type) int cx18_streams_register(struct cx18 *cx) { int type; - int err = 0; + int err; + int ret = 0; /* Register V4L2 devices */ - for (type = 0; type < CX18_MAX_STREAMS; type++) - err |= cx18_reg_dev(cx, type); + for (type = 0; type < CX18_MAX_STREAMS; type++) { + err = cx18_reg_dev(cx, type); + if (err && ret == 0) + ret = err; + } - if (err == 0) + if (ret == 0) return 0; /* One or more streams could not be initialized. Clean 'em all up. */ cx18_streams_cleanup(cx, 1); - return -ENOMEM; + return ret; } /* Unregister v4l2 devices */ diff --git a/drivers/media/video/cx23885/cx23885-417.c b/drivers/media/video/cx23885/cx23885-417.c index 395c11fa47ce..00831f3ef8f5 100644 --- a/drivers/media/video/cx23885/cx23885-417.c +++ b/drivers/media/video/cx23885/cx23885-417.c @@ -1815,7 +1815,7 @@ int cx23885_417_register(struct cx23885_dev *dev) cx23885_mc417_init(dev); printk(KERN_INFO "%s: registered device video%d [mpeg]\n", - dev->name, dev->v4l_device->minor & 0x1f); + dev->name, dev->v4l_device->num); return 0; } diff --git a/drivers/media/video/cx23885/cx23885-video.c b/drivers/media/video/cx23885/cx23885-video.c index ab3110d6046c..c742a10be5cb 100644 --- a/drivers/media/video/cx23885/cx23885-video.c +++ b/drivers/media/video/cx23885/cx23885-video.c @@ -1543,7 +1543,7 @@ int cx23885_video_register(struct cx23885_dev *dev) goto fail_unreg; } printk(KERN_INFO "%s/0: registered device video%d [v4l2]\n", - dev->name, dev->video_dev->minor & 0x1f); + dev->name, dev->video_dev->num); /* initial device configuration */ mutex_lock(&dev->lock); cx23885_set_tvnorm(dev, dev->tvnorm); diff --git a/drivers/media/video/cx88/cx88-blackbird.c b/drivers/media/video/cx88/cx88-blackbird.c index e71369754305..078be6319556 100644 --- a/drivers/media/video/cx88/cx88-blackbird.c +++ b/drivers/media/video/cx88/cx88-blackbird.c @@ -1285,7 +1285,7 @@ static int blackbird_register_video(struct cx8802_dev *dev) return err; } printk(KERN_INFO "%s/2: registered device video%d [mpeg]\n", - dev->core->name,dev->mpeg_dev->minor & 0x1f); + dev->core->name, dev->mpeg_dev->num); return 0; } diff --git a/drivers/media/video/cx88/cx88-cards.c b/drivers/media/video/cx88/cx88-cards.c index fbc224f46e0e..5bcbb4cc7c2a 100644 --- a/drivers/media/video/cx88/cx88-cards.c +++ b/drivers/media/video/cx88/cx88-cards.c @@ -3044,8 +3044,8 @@ struct cx88_core *cx88_core_create(struct pci_dev *pci, int nr) memcpy(&core->board, &cx88_boards[core->boardnr], sizeof(core->board)); - if (!core->board.num_frontends) - core->board.num_frontends=1; + if (!core->board.num_frontends && (core->board.mpeg & CX88_MPEG_DVB)) + core->board.num_frontends = 1; info_printk(core, "subsystem: %04x:%04x, board: %s [card=%d,%s], frontend(s): %d\n", pci->subsystem_vendor, pci->subsystem_device, core->board.name, diff --git a/drivers/media/video/cx88/cx88-dvb.c b/drivers/media/video/cx88/cx88-dvb.c index 6968ab0181aa..cf6c30d4e545 100644 --- a/drivers/media/video/cx88/cx88-dvb.c +++ b/drivers/media/video/cx88/cx88-dvb.c @@ -789,7 +789,7 @@ static int dvb_register(struct cx8802_dev *dev) if (fe0->dvb.frontend) fe0->dvb.frontend->ops.i2c_gate_ctrl = NULL; if (attach_xc3028(0x61, dev) < 0) - return -EINVAL; + goto frontend_detach; break; case CX88_BOARD_PCHDTV_HD3000: fe0->dvb.frontend = dvb_attach(or51132_attach, &pchdtv_hd3000, @@ -1058,7 +1058,6 @@ static int dvb_register(struct cx8802_dev *dev) goto frontend_detach; core->prev_set_voltage = fe0->dvb.frontend->ops.set_voltage; fe0->dvb.frontend->ops.set_voltage = tevii_dvbs_set_voltage; - } } break; @@ -1110,10 +1109,7 @@ static int dvb_register(struct cx8802_dev *dev) &dev->pci->dev, adapter_nr, mfe_shared); frontend_detach: - if (fe0->dvb.frontend) { - dvb_frontend_detach(fe0->dvb.frontend); - fe0->dvb.frontend = NULL; - } + videobuf_dvb_dealloc_frontends(&dev->frontends); return -EINVAL; } @@ -1246,8 +1242,11 @@ fail_core: static int cx8802_dvb_remove(struct cx8802_driver *drv) { + struct cx88_core *core = drv->core; struct cx8802_dev *dev = drv->core->dvbdev; + dprintk( 1, "%s\n", __func__); + videobuf_dvb_unregister_bus(&dev->frontends); vp3054_i2c_remove(dev); diff --git a/drivers/media/video/cx88/cx88-i2c.c b/drivers/media/video/cx88/cx88-i2c.c index 01de23007095..1ab691d20692 100644 --- a/drivers/media/video/cx88/cx88-i2c.c +++ b/drivers/media/video/cx88/cx88-i2c.c @@ -116,8 +116,10 @@ static int detach_inform(struct i2c_client *client) void cx88_call_i2c_clients(struct cx88_core *core, unsigned int cmd, void *arg) { +#if defined(CONFIG_VIDEO_CX88_DVB) || defined(CONFIG_VIDEO_CX88_DVB_MODULE) struct videobuf_dvb_frontends *f = &core->dvbdev->frontends; struct videobuf_dvb_frontend *fe = NULL; +#endif if (0 != core->i2c_rc) return; diff --git a/drivers/media/video/cx88/cx88-mpeg.c b/drivers/media/video/cx88/cx88-mpeg.c index 6df5cf314186..a1c435b4b1cd 100644 --- a/drivers/media/video/cx88/cx88-mpeg.c +++ b/drivers/media/video/cx88/cx88-mpeg.c @@ -768,8 +768,11 @@ static int __devinit cx8802_probe(struct pci_dev *pci_dev, { struct cx8802_dev *dev; struct cx88_core *core; + int err; +#if defined(CONFIG_VIDEO_CX88_DVB) || defined(CONFIG_VIDEO_CX88_DVB_MODULE) struct videobuf_dvb_frontend *demod; - int err,i; + int i; +#endif /* general setup */ core = cx88_core_get(pci_dev); @@ -782,11 +785,6 @@ static int __devinit cx8802_probe(struct pci_dev *pci_dev, if (!core->board.mpeg) goto fail_core; - if (!core->board.num_frontends) { - printk(KERN_ERR "%s() .num_frontends should be non-zero, err = %d\n", __func__, err); - goto fail_core; - } - err = -ENOMEM; dev = kzalloc(sizeof(*dev),GFP_KERNEL); if (NULL == dev) @@ -801,10 +799,12 @@ static int __devinit cx8802_probe(struct pci_dev *pci_dev, INIT_LIST_HEAD(&dev->drvlist); list_add_tail(&dev->devlist,&cx8802_devlist); +#if defined(CONFIG_VIDEO_CX88_DVB) || defined(CONFIG_VIDEO_CX88_DVB_MODULE) mutex_init(&dev->frontends.lock); INIT_LIST_HEAD(&dev->frontends.felist); - printk(KERN_INFO "%s() allocating %d frontend(s)\n", __func__, core->board.num_frontends); + if (core->board.num_frontends) + printk(KERN_INFO "%s() allocating %d frontend(s)\n", __func__, core->board.num_frontends); for (i = 1; i <= core->board.num_frontends; i++) { demod = videobuf_dvb_alloc_frontend(&dev->frontends, i); @@ -814,6 +814,7 @@ static int __devinit cx8802_probe(struct pci_dev *pci_dev, goto fail_free; } } +#endif /* Maintain a reference so cx88-video can query the 8802 device. */ core->dvbdev = dev; diff --git a/drivers/media/video/cx88/cx88-video.c b/drivers/media/video/cx88/cx88-video.c index 3904b73f52ee..61265fd04d56 100644 --- a/drivers/media/video/cx88/cx88-video.c +++ b/drivers/media/video/cx88/cx88-video.c @@ -1911,7 +1911,7 @@ static int __devinit cx8800_initdev(struct pci_dev *pci_dev, goto fail_unreg; } printk(KERN_INFO "%s/0: registered device video%d [v4l2]\n", - core->name,dev->video_dev->minor & 0x1f); + core->name, dev->video_dev->num); dev->vbi_dev = cx88_vdev_init(core,dev->pci,&cx8800_vbi_template,"vbi"); err = video_register_device(dev->vbi_dev,VFL_TYPE_VBI, @@ -1922,7 +1922,7 @@ static int __devinit cx8800_initdev(struct pci_dev *pci_dev, goto fail_unreg; } printk(KERN_INFO "%s/0: registered device vbi%d\n", - core->name,dev->vbi_dev->minor & 0x1f); + core->name, dev->vbi_dev->num); if (core->board.radio.type == CX88_RADIO) { dev->radio_dev = cx88_vdev_init(core,dev->pci, @@ -1935,7 +1935,7 @@ static int __devinit cx8800_initdev(struct pci_dev *pci_dev, goto fail_unreg; } printk(KERN_INFO "%s/0: registered device radio%d\n", - core->name,dev->radio_dev->minor & 0x1f); + core->name, dev->radio_dev->num); } /* everything worked */ diff --git a/drivers/media/video/em28xx/em28xx-video.c b/drivers/media/video/em28xx/em28xx-video.c index c53649e5315b..a1ab2ef45578 100644 --- a/drivers/media/video/em28xx/em28xx-video.c +++ b/drivers/media/video/em28xx/em28xx-video.c @@ -2042,7 +2042,7 @@ static int em28xx_init_dev(struct em28xx **devhandle, struct usb_device *udev, goto fail_unreg; } em28xx_info("Registered radio device as /dev/radio%d\n", - dev->radio_dev->minor & 0x1f); + dev->radio_dev->num); } /* init video dma queues */ diff --git a/drivers/media/video/et61x251/et61x251_core.c b/drivers/media/video/et61x251/et61x251_core.c index 7a85c41b0eea..9d0ef96c23ff 100644 --- a/drivers/media/video/et61x251/et61x251_core.c +++ b/drivers/media/video/et61x251/et61x251_core.c @@ -588,7 +588,7 @@ static int et61x251_stream_interrupt(struct et61x251_device* cam) cam->state |= DEV_MISCONFIGURED; DBG(1, "URB timeout reached. The camera is misconfigured. To " "use it, close and open /dev/video%d again.", - cam->v4ldev->minor); + cam->v4ldev->num); return -EIO; } @@ -1195,7 +1195,7 @@ static void et61x251_release_resources(struct kref *kref) cam = container_of(kref, struct et61x251_device, kref); - DBG(2, "V4L2 device /dev/video%d deregistered", cam->v4ldev->minor); + DBG(2, "V4L2 device /dev/video%d deregistered", cam->v4ldev->num); video_set_drvdata(cam->v4ldev, NULL); video_unregister_device(cam->v4ldev); usb_put_dev(cam->usbdev); @@ -1237,7 +1237,7 @@ static int et61x251_open(struct inode* inode, struct file* filp) if (cam->users) { DBG(2, "Device /dev/video%d is already in use", - cam->v4ldev->minor); + cam->v4ldev->num); DBG(3, "Simultaneous opens are not supported"); if ((filp->f_flags & O_NONBLOCK) || (filp->f_flags & O_NDELAY)) { @@ -1280,7 +1280,7 @@ static int et61x251_open(struct inode* inode, struct file* filp) cam->frame_count = 0; et61x251_empty_framequeues(cam); - DBG(3, "Video device /dev/video%d is open", cam->v4ldev->minor); + DBG(3, "Video device /dev/video%d is open", cam->v4ldev->num); out: mutex_unlock(&cam->open_mutex); @@ -1304,7 +1304,7 @@ static int et61x251_release(struct inode* inode, struct file* filp) cam->users--; wake_up_interruptible_nr(&cam->wait_open, 1); - DBG(3, "Video device /dev/video%d closed", cam->v4ldev->minor); + DBG(3, "Video device /dev/video%d closed", cam->v4ldev->num); kref_put(&cam->kref, et61x251_release_resources); @@ -1845,7 +1845,7 @@ et61x251_vidioc_s_crop(struct et61x251_device* cam, void __user * arg) cam->state |= DEV_MISCONFIGURED; DBG(1, "VIDIOC_S_CROP failed because of hardware problems. To " "use the camera, close and open /dev/video%d again.", - cam->v4ldev->minor); + cam->v4ldev->num); return -EIO; } @@ -1858,7 +1858,7 @@ et61x251_vidioc_s_crop(struct et61x251_device* cam, void __user * arg) cam->state |= DEV_MISCONFIGURED; DBG(1, "VIDIOC_S_CROP failed because of not enough memory. To " "use the camera, close and open /dev/video%d again.", - cam->v4ldev->minor); + cam->v4ldev->num); return -ENOMEM; } @@ -2068,7 +2068,7 @@ et61x251_vidioc_try_s_fmt(struct et61x251_device* cam, unsigned int cmd, cam->state |= DEV_MISCONFIGURED; DBG(1, "VIDIOC_S_FMT failed because of hardware problems. To " "use the camera, close and open /dev/video%d again.", - cam->v4ldev->minor); + cam->v4ldev->num); return -EIO; } @@ -2080,7 +2080,7 @@ et61x251_vidioc_try_s_fmt(struct et61x251_device* cam, unsigned int cmd, cam->state |= DEV_MISCONFIGURED; DBG(1, "VIDIOC_S_FMT failed because of not enough memory. To " "use the camera, close and open /dev/video%d again.", - cam->v4ldev->minor); + cam->v4ldev->num); return -ENOMEM; } @@ -2128,7 +2128,7 @@ et61x251_vidioc_s_jpegcomp(struct et61x251_device* cam, void __user * arg) cam->state |= DEV_MISCONFIGURED; DBG(1, "VIDIOC_S_JPEGCOMP failed because of hardware " "problems. To use the camera, close and open " - "/dev/video%d again.", cam->v4ldev->minor); + "/dev/video%d again.", cam->v4ldev->num); return -EIO; } @@ -2605,7 +2605,7 @@ et61x251_usb_probe(struct usb_interface* intf, const struct usb_device_id* id) goto fail; } - DBG(2, "V4L2 device registered as /dev/video%d", cam->v4ldev->minor); + DBG(2, "V4L2 device registered as /dev/video%d", cam->v4ldev->num); cam->module_param.force_munmap = force_munmap[dev_nr]; cam->module_param.frame_timeout = frame_timeout[dev_nr]; @@ -2658,7 +2658,7 @@ static void et61x251_usb_disconnect(struct usb_interface* intf) if (cam->users) { DBG(2, "Device /dev/video%d is open! Deregistration and " "memory deallocation are deferred.", - cam->v4ldev->minor); + cam->v4ldev->num); cam->state |= DEV_MISCONFIGURED; et61x251_stop_transfer(cam); cam->state |= DEV_DISCONNECTED; diff --git a/drivers/media/video/ivtv/ivtv-driver.c b/drivers/media/video/ivtv/ivtv-driver.c index aeaa13f6cb36..d36485023b68 100644 --- a/drivers/media/video/ivtv/ivtv-driver.c +++ b/drivers/media/video/ivtv/ivtv-driver.c @@ -1211,6 +1211,10 @@ static int __devinit ivtv_probe(struct pci_dev *dev, if (itv->v4l2_cap & V4L2_CAP_VIDEO_OUTPUT) { ivtv_call_i2c_clients(itv, VIDIOC_INT_S_STD_OUTPUT, &itv->std); + /* Turn off the output signal. The mpeg decoder is not yet + active so without this you would get a green image until the + mpeg decoder becomes active. */ + ivtv_saa7127(itv, VIDIOC_STREAMOFF, NULL); } /* clear interrupt mask, effectively disabling interrupts */ @@ -1330,6 +1334,10 @@ int ivtv_init_on_first_open(struct ivtv *itv) ivtv_s_frequency(NULL, &fh, &vf); if (itv->card->v4l2_capabilities & V4L2_CAP_VIDEO_OUTPUT) { + /* Turn on the TV-out: ivtv_init_mpeg_decoder() initializes + the mpeg decoder so now the saa7127 receives a proper + signal. */ + ivtv_saa7127(itv, VIDIOC_STREAMON, NULL); ivtv_init_mpeg_decoder(itv); } ivtv_s_std(NULL, &fh, &itv->tuner_std); @@ -1366,6 +1374,10 @@ static void ivtv_remove(struct pci_dev *pci_dev) /* Stop all decoding */ IVTV_DEBUG_INFO("Stopping decoding\n"); + + /* Turn off the TV-out */ + if (itv->v4l2_cap & V4L2_CAP_VIDEO_OUTPUT) + ivtv_saa7127(itv, VIDIOC_STREAMOFF, NULL); if (atomic_read(&itv->decoding) > 0) { int type; diff --git a/drivers/media/video/ivtv/ivtv-i2c.c b/drivers/media/video/ivtv/ivtv-i2c.c index 24700c211d52..41dbbe9621a1 100644 --- a/drivers/media/video/ivtv/ivtv-i2c.c +++ b/drivers/media/video/ivtv/ivtv-i2c.c @@ -726,6 +726,7 @@ int ivtv_saa7127(struct ivtv *itv, unsigned int cmd, void *arg) { return ivtv_call_i2c_client(itv, IVTV_SAA7127_I2C_ADDR, cmd, arg); } +EXPORT_SYMBOL(ivtv_saa7127); int ivtv_saa717x(struct ivtv *itv, unsigned int cmd, void *arg) { diff --git a/drivers/media/video/ivtv/ivtv-ioctl.c b/drivers/media/video/ivtv/ivtv-ioctl.c index 208fb54842f2..4bae38d21ef6 100644 --- a/drivers/media/video/ivtv/ivtv-ioctl.c +++ b/drivers/media/video/ivtv/ivtv-ioctl.c @@ -1756,12 +1756,12 @@ static int ivtv_default(struct file *file, void *fh, int cmd, void *arg) return 0; } -static int ivtv_serialized_ioctl(struct ivtv *itv, struct inode *inode, struct file *filp, +static long ivtv_serialized_ioctl(struct ivtv *itv, struct file *filp, unsigned int cmd, unsigned long arg) { struct video_device *vfd = video_devdata(filp); struct ivtv_open_id *id = (struct ivtv_open_id *)filp->private_data; - int ret; + long ret; /* Filter dvb ioctls that cannot be handled by the v4l ioctl framework */ switch (cmd) { @@ -1830,20 +1830,19 @@ static int ivtv_serialized_ioctl(struct ivtv *itv, struct inode *inode, struct f if (ivtv_debug & IVTV_DBGFLG_IOCTL) vfd->debug = V4L2_DEBUG_IOCTL | V4L2_DEBUG_IOCTL_ARG; - ret = video_ioctl2(inode, filp, cmd, arg); + ret = __video_ioctl2(filp, cmd, arg); vfd->debug = 0; return ret; } -int ivtv_v4l2_ioctl(struct inode *inode, struct file *filp, unsigned int cmd, - unsigned long arg) +long ivtv_v4l2_ioctl(struct file *filp, unsigned int cmd, unsigned long arg) { struct ivtv_open_id *id = (struct ivtv_open_id *)filp->private_data; struct ivtv *itv = id->itv; - int res; + long res; mutex_lock(&itv->serialize_lock); - res = ivtv_serialized_ioctl(itv, inode, filp, cmd, arg); + res = ivtv_serialized_ioctl(itv, filp, cmd, arg); mutex_unlock(&itv->serialize_lock); return res; } diff --git a/drivers/media/video/ivtv/ivtv-ioctl.h b/drivers/media/video/ivtv/ivtv-ioctl.h index 70188588b4f4..58f003412afd 100644 --- a/drivers/media/video/ivtv/ivtv-ioctl.h +++ b/drivers/media/video/ivtv/ivtv-ioctl.h @@ -30,7 +30,6 @@ void ivtv_set_funcs(struct video_device *vdev); int ivtv_s_std(struct file *file, void *fh, v4l2_std_id *std); int ivtv_s_frequency(struct file *file, void *fh, struct v4l2_frequency *vf); int ivtv_s_input(struct file *file, void *fh, unsigned int inp); -int ivtv_v4l2_ioctl(struct inode *inode, struct file *filp, unsigned int cmd, - unsigned long arg); +long ivtv_v4l2_ioctl(struct file *filp, unsigned int cmd, unsigned long arg); #endif diff --git a/drivers/media/video/ivtv/ivtv-streams.c b/drivers/media/video/ivtv/ivtv-streams.c index 5bbf31e39304..9b7aa79eb267 100644 --- a/drivers/media/video/ivtv/ivtv-streams.c +++ b/drivers/media/video/ivtv/ivtv-streams.c @@ -48,7 +48,7 @@ static const struct file_operations ivtv_v4l2_enc_fops = { .read = ivtv_v4l2_read, .write = ivtv_v4l2_write, .open = ivtv_v4l2_open, - .ioctl = ivtv_v4l2_ioctl, + .unlocked_ioctl = ivtv_v4l2_ioctl, .compat_ioctl = v4l_compat_ioctl32, .release = ivtv_v4l2_close, .poll = ivtv_v4l2_enc_poll, @@ -59,7 +59,7 @@ static const struct file_operations ivtv_v4l2_dec_fops = { .read = ivtv_v4l2_read, .write = ivtv_v4l2_write, .open = ivtv_v4l2_open, - .ioctl = ivtv_v4l2_ioctl, + .unlocked_ioctl = ivtv_v4l2_ioctl, .compat_ioctl = v4l_compat_ioctl32, .release = ivtv_v4l2_close, .poll = ivtv_v4l2_dec_poll, diff --git a/drivers/media/video/ivtv/ivtvfb.c b/drivers/media/video/ivtv/ivtvfb.c index 8a4a150b12fb..921e281876f8 100644 --- a/drivers/media/video/ivtv/ivtvfb.c +++ b/drivers/media/video/ivtv/ivtvfb.c @@ -48,6 +48,7 @@ #endif #include "ivtv-driver.h" +#include "ivtv-i2c.h" #include "ivtv-udma.h" #include "ivtv-mailbox.h" @@ -894,11 +895,16 @@ static int ivtvfb_blank(int blank_mode, struct fb_info *info) switch (blank_mode) { case FB_BLANK_UNBLANK: ivtv_vapi(itv, CX2341X_OSD_SET_STATE, 1, 1); + ivtv_saa7127(itv, VIDIOC_STREAMON, NULL); break; case FB_BLANK_NORMAL: case FB_BLANK_HSYNC_SUSPEND: case FB_BLANK_VSYNC_SUSPEND: + ivtv_vapi(itv, CX2341X_OSD_SET_STATE, 1, 0); + ivtv_saa7127(itv, VIDIOC_STREAMON, NULL); + break; case FB_BLANK_POWERDOWN: + ivtv_saa7127(itv, VIDIOC_STREAMOFF, NULL); ivtv_vapi(itv, CX2341X_OSD_SET_STATE, 1, 0); break; } diff --git a/drivers/media/video/pvrusb2/pvrusb2-encoder.c b/drivers/media/video/pvrusb2/pvrusb2-encoder.c index a1252d673b41..273d2a1aa220 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-encoder.c +++ b/drivers/media/video/pvrusb2/pvrusb2-encoder.c @@ -402,6 +402,10 @@ static int pvr2_encoder_prep_config(struct pvr2_hdw *hdw) ret |= pvr2_encoder_vcmd(hdw, CX2341X_ENC_MISC,4, 0,3,0,0); ret |= pvr2_encoder_vcmd(hdw, CX2341X_ENC_MISC,4,15,0,0,0); + /* prevent the PTSs from slowly drifting away in the generated + MPEG stream */ + ret |= pvr2_encoder_vcmd(hdw, CX2341X_ENC_MISC, 2, 4, 1); + return ret; } diff --git a/drivers/media/video/pvrusb2/pvrusb2-hdw.c b/drivers/media/video/pvrusb2/pvrusb2-hdw.c index 94265bd3d926..5b81ba469641 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-hdw.c +++ b/drivers/media/video/pvrusb2/pvrusb2-hdw.c @@ -60,7 +60,6 @@ static struct pvr2_hdw *unit_pointers[PVR_NUM] = {[ 0 ... PVR_NUM-1 ] = NULL}; static DEFINE_MUTEX(pvr2_unit_mtx); static int ctlchg; -static int initusbreset = 1; static int procreload; static int tuner[PVR_NUM] = { [0 ... PVR_NUM-1] = -1 }; static int tolerance[PVR_NUM] = { [0 ... PVR_NUM-1] = 0 }; @@ -71,8 +70,6 @@ module_param(ctlchg, int, S_IRUGO|S_IWUSR); MODULE_PARM_DESC(ctlchg, "0=optimize ctl change 1=always accept new ctl value"); module_param(init_pause_msec, int, S_IRUGO|S_IWUSR); MODULE_PARM_DESC(init_pause_msec, "hardware initialization settling delay"); -module_param(initusbreset, int, S_IRUGO|S_IWUSR); -MODULE_PARM_DESC(initusbreset, "Do USB reset device on probe"); module_param(procreload, int, S_IRUGO|S_IWUSR); MODULE_PARM_DESC(procreload, "Attempt init failure recovery with firmware reload"); @@ -1967,9 +1964,6 @@ static void pvr2_hdw_setup_low(struct pvr2_hdw *hdw) } hdw->fw1_state = FW1_STATE_OK; - if (initusbreset) { - pvr2_hdw_device_reset(hdw); - } if (!pvr2_hdw_dev_ok(hdw)) return; for (idx = 0; idx < hdw->hdw_desc->client_modules.cnt; idx++) { diff --git a/drivers/media/video/pvrusb2/pvrusb2-v4l2.c b/drivers/media/video/pvrusb2/pvrusb2-v4l2.c index f048d80b77e5..97ed95957992 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-v4l2.c +++ b/drivers/media/video/pvrusb2/pvrusb2-v4l2.c @@ -168,7 +168,7 @@ static const char *get_v4l_name(int v4l_type) * This is part of Video 4 Linux API. The procedure handles ioctl() calls. * */ -static int pvr2_v4l2_do_ioctl(struct inode *inode, struct file *file, +static int __pvr2_v4l2_do_ioctl(struct file *file, unsigned int cmd, void *arg) { struct pvr2_v4l2_fh *fh = file->private_data; @@ -863,8 +863,8 @@ static int pvr2_v4l2_do_ioctl(struct inode *inode, struct file *file, #endif default : - ret = v4l_compat_translate_ioctl(inode,file,cmd, - arg,pvr2_v4l2_do_ioctl); + ret = v4l_compat_translate_ioctl(file, cmd, + arg, __pvr2_v4l2_do_ioctl); } pvr2_hdw_commit_ctl(hdw); @@ -890,10 +890,15 @@ static int pvr2_v4l2_do_ioctl(struct inode *inode, struct file *file, return ret; } +static int pvr2_v4l2_do_ioctl(struct inode *inode, struct file *file, + unsigned int cmd, void *arg) +{ + return __pvr2_v4l2_do_ioctl(file, cmd, arg); +} static void pvr2_v4l2_dev_destroy(struct pvr2_v4l2_dev *dip) { - int minor_id = dip->devbase.minor; + int num = dip->devbase.num; struct pvr2_hdw *hdw = dip->v4lp->channel.mc_head->hdw; enum pvr2_config cfg = dip->config; int v4l_type = dip->v4l_type; @@ -909,7 +914,7 @@ static void pvr2_v4l2_dev_destroy(struct pvr2_v4l2_dev *dip) video_unregister_device(&dip->devbase); printk(KERN_INFO "pvrusb2: unregistered device %s%u [%s]\n", - get_v4l_name(v4l_type),minor_id & 0x1f, + get_v4l_name(v4l_type), num, pvr2_config_get_name(cfg)); } @@ -1310,7 +1315,7 @@ static void pvr2_v4l2_dev_init(struct pvr2_v4l2_dev *dip, } printk(KERN_INFO "pvrusb2: registered device %s%u [%s]\n", - get_v4l_name(dip->v4l_type),dip->devbase.minor & 0x1f, + get_v4l_name(dip->v4l_type), dip->devbase.num, pvr2_config_get_name(dip->config)); pvr2_hdw_v4l_store_minor_number(vp->channel.mc_head->hdw, diff --git a/drivers/media/video/pwc/pwc-if.c b/drivers/media/video/pwc/pwc-if.c index ab28389b4cda..f3897a3fdb75 100644 --- a/drivers/media/video/pwc/pwc-if.c +++ b/drivers/media/video/pwc/pwc-if.c @@ -1795,7 +1795,7 @@ static int usb_pwc_probe(struct usb_interface *intf, const struct usb_device_id goto err; } else { - PWC_INFO("Registered as /dev/video%d.\n", pdev->vdev->minor & 0x3F); + PWC_INFO("Registered as /dev/video%d.\n", pdev->vdev->num); } /* occupy slot */ diff --git a/drivers/media/video/saa7134/saa7134-core.c b/drivers/media/video/saa7134/saa7134-core.c index b686bfabbde0..249184452949 100644 --- a/drivers/media/video/saa7134/saa7134-core.c +++ b/drivers/media/video/saa7134/saa7134-core.c @@ -996,7 +996,7 @@ static int __devinit saa7134_initdev(struct pci_dev *pci_dev, goto fail4; } printk(KERN_INFO "%s: registered device video%d [v4l2]\n", - dev->name,dev->video_dev->minor & 0x1f); + dev->name, dev->video_dev->num); dev->vbi_dev = vdev_init(dev, &saa7134_video_template, "vbi"); @@ -1005,7 +1005,7 @@ static int __devinit saa7134_initdev(struct pci_dev *pci_dev, if (err < 0) goto fail4; printk(KERN_INFO "%s: registered device vbi%d\n", - dev->name,dev->vbi_dev->minor & 0x1f); + dev->name, dev->vbi_dev->num); if (card_has_radio(dev)) { dev->radio_dev = vdev_init(dev,&saa7134_radio_template,"radio"); @@ -1014,7 +1014,7 @@ static int __devinit saa7134_initdev(struct pci_dev *pci_dev, if (err < 0) goto fail4; printk(KERN_INFO "%s: registered device radio%d\n", - dev->name,dev->radio_dev->minor & 0x1f); + dev->name, dev->radio_dev->num); } /* everything worked */ diff --git a/drivers/media/video/saa7134/saa7134-empress.c b/drivers/media/video/saa7134/saa7134-empress.c index 9a8766a78a0c..7f40511bcc04 100644 --- a/drivers/media/video/saa7134/saa7134-empress.c +++ b/drivers/media/video/saa7134/saa7134-empress.c @@ -534,7 +534,7 @@ static int empress_init(struct saa7134_dev *dev) return err; } printk(KERN_INFO "%s: registered device video%d [mpeg]\n", - dev->name,dev->empress_dev->minor & 0x1f); + dev->name, dev->empress_dev->num); videobuf_queue_sg_init(&dev->empress_tsq, &saa7134_ts_qops, &dev->pci->dev, &dev->slock, diff --git a/drivers/media/video/se401.c b/drivers/media/video/se401.c index ae3949180c4e..044a2e94c34d 100644 --- a/drivers/media/video/se401.c +++ b/drivers/media/video/se401.c @@ -1412,7 +1412,7 @@ static int se401_probe(struct usb_interface *intf, return -EIO; } dev_info(&intf->dev, "registered new video device: video%d\n", - se401->vdev.minor); + se401->vdev.num); usb_set_intfdata (intf, se401); return 0; diff --git a/drivers/media/video/sn9c102/sn9c102_core.c b/drivers/media/video/sn9c102/sn9c102_core.c index 20e30bd9364b..fcd2b62f92c4 100644 --- a/drivers/media/video/sn9c102/sn9c102_core.c +++ b/drivers/media/video/sn9c102/sn9c102_core.c @@ -1008,7 +1008,7 @@ static int sn9c102_stream_interrupt(struct sn9c102_device* cam) cam->state |= DEV_MISCONFIGURED; DBG(1, "URB timeout reached. The camera is misconfigured. " "To use it, close and open /dev/video%d again.", - cam->v4ldev->minor); + cam->v4ldev->num); return -EIO; } @@ -1734,7 +1734,7 @@ static void sn9c102_release_resources(struct kref *kref) cam = container_of(kref, struct sn9c102_device, kref); - DBG(2, "V4L2 device /dev/video%d deregistered", cam->v4ldev->minor); + DBG(2, "V4L2 device /dev/video%d deregistered", cam->v4ldev->num); video_set_drvdata(cam->v4ldev, NULL); video_unregister_device(cam->v4ldev); usb_put_dev(cam->usbdev); @@ -1792,7 +1792,7 @@ static int sn9c102_open(struct inode* inode, struct file* filp) if (cam->users) { DBG(2, "Device /dev/video%d is already in use", - cam->v4ldev->minor); + cam->v4ldev->num); DBG(3, "Simultaneous opens are not supported"); /* open() must follow the open flags and should block @@ -1845,7 +1845,7 @@ static int sn9c102_open(struct inode* inode, struct file* filp) cam->frame_count = 0; sn9c102_empty_framequeues(cam); - DBG(3, "Video device /dev/video%d is open", cam->v4ldev->minor); + DBG(3, "Video device /dev/video%d is open", cam->v4ldev->num); out: mutex_unlock(&cam->open_mutex); @@ -1870,7 +1870,7 @@ static int sn9c102_release(struct inode* inode, struct file* filp) cam->users--; wake_up_interruptible_nr(&cam->wait_open, 1); - DBG(3, "Video device /dev/video%d closed", cam->v4ldev->minor); + DBG(3, "Video device /dev/video%d closed", cam->v4ldev->num); kref_put(&cam->kref, sn9c102_release_resources); @@ -2432,7 +2432,7 @@ sn9c102_vidioc_s_crop(struct sn9c102_device* cam, void __user * arg) cam->state |= DEV_MISCONFIGURED; DBG(1, "VIDIOC_S_CROP failed because of hardware problems. To " "use the camera, close and open /dev/video%d again.", - cam->v4ldev->minor); + cam->v4ldev->num); return -EIO; } @@ -2445,7 +2445,7 @@ sn9c102_vidioc_s_crop(struct sn9c102_device* cam, void __user * arg) cam->state |= DEV_MISCONFIGURED; DBG(1, "VIDIOC_S_CROP failed because of not enough memory. To " "use the camera, close and open /dev/video%d again.", - cam->v4ldev->minor); + cam->v4ldev->num); return -ENOMEM; } @@ -2689,7 +2689,7 @@ sn9c102_vidioc_try_s_fmt(struct sn9c102_device* cam, unsigned int cmd, cam->state |= DEV_MISCONFIGURED; DBG(1, "VIDIOC_S_FMT failed because of hardware problems. To " "use the camera, close and open /dev/video%d again.", - cam->v4ldev->minor); + cam->v4ldev->num); return -EIO; } @@ -2701,7 +2701,7 @@ sn9c102_vidioc_try_s_fmt(struct sn9c102_device* cam, unsigned int cmd, cam->state |= DEV_MISCONFIGURED; DBG(1, "VIDIOC_S_FMT failed because of not enough memory. To " "use the camera, close and open /dev/video%d again.", - cam->v4ldev->minor); + cam->v4ldev->num); return -ENOMEM; } @@ -2748,7 +2748,7 @@ sn9c102_vidioc_s_jpegcomp(struct sn9c102_device* cam, void __user * arg) cam->state |= DEV_MISCONFIGURED; DBG(1, "VIDIOC_S_JPEGCOMP failed because of hardware " "problems. To use the camera, close and open " - "/dev/video%d again.", cam->v4ldev->minor); + "/dev/video%d again.", cam->v4ldev->num); return -EIO; } @@ -3348,7 +3348,7 @@ sn9c102_usb_probe(struct usb_interface* intf, const struct usb_device_id* id) goto fail; } - DBG(2, "V4L2 device registered as /dev/video%d", cam->v4ldev->minor); + DBG(2, "V4L2 device registered as /dev/video%d", cam->v4ldev->num); video_set_drvdata(cam->v4ldev, cam); cam->module_param.force_munmap = force_munmap[dev_nr]; @@ -3402,7 +3402,7 @@ static void sn9c102_usb_disconnect(struct usb_interface* intf) if (cam->users) { DBG(2, "Device /dev/video%d is open! Deregistration and " "memory deallocation are deferred.", - cam->v4ldev->minor); + cam->v4ldev->num); cam->state |= DEV_MISCONFIGURED; sn9c102_stop_transfer(cam); cam->state |= DEV_DISCONNECTED; diff --git a/drivers/media/video/stk-webcam.c b/drivers/media/video/stk-webcam.c index edaea4964513..e9eb6d754d5c 100644 --- a/drivers/media/video/stk-webcam.c +++ b/drivers/media/video/stk-webcam.c @@ -1331,7 +1331,7 @@ static int stk_register_video_device(struct stk_camera *dev) STK_ERROR("v4l registration failed\n"); else STK_INFO("Syntek USB2.0 Camera is now controlling video device" - " /dev/video%d\n", dev->vdev.minor); + " /dev/video%d\n", dev->vdev.num); return err; } @@ -1426,7 +1426,7 @@ static void stk_camera_disconnect(struct usb_interface *interface) stk_remove_sysfs_files(&dev->vdev); STK_INFO("Syntek USB2.0 Camera release resources " - "video device /dev/video%d\n", dev->vdev.minor); + "video device /dev/video%d\n", dev->vdev.num); video_unregister_device(&dev->vdev); } diff --git a/drivers/media/video/stv680.c b/drivers/media/video/stv680.c index 9c549d935994..328c41b1517d 100644 --- a/drivers/media/video/stv680.c +++ b/drivers/media/video/stv680.c @@ -1470,7 +1470,8 @@ static int stv680_probe (struct usb_interface *intf, const struct usb_device_id retval = -EIO; goto error_vdev; } - PDEBUG (0, "STV(i): registered new video device: video%d", stv680->vdev->minor); + PDEBUG(0, "STV(i): registered new video device: video%d", + stv680->vdev->num); usb_set_intfdata (intf, stv680); retval = stv680_create_sysfs_files(stv680->vdev); diff --git a/drivers/media/video/usbvideo/usbvideo.c b/drivers/media/video/usbvideo/usbvideo.c index 07cd87d16f69..7c575bb8184f 100644 --- a/drivers/media/video/usbvideo/usbvideo.c +++ b/drivers/media/video/usbvideo/usbvideo.c @@ -1059,7 +1059,7 @@ int usbvideo_RegisterVideoDevice(struct uvd *uvd) dev_info(&uvd->dev->dev, "%s on /dev/video%d: canvas=%s videosize=%s\n", (uvd->handle != NULL) ? uvd->handle->drvName : "???", - uvd->vdev.minor, tmp2, tmp1); + uvd->vdev.num, tmp2, tmp1); usb_get_dev(uvd->dev); return 0; diff --git a/drivers/media/video/usbvideo/vicam.c b/drivers/media/video/usbvideo/vicam.c index 7a127d6bfdee..8e2d58bec481 100644 --- a/drivers/media/video/usbvideo/vicam.c +++ b/drivers/media/video/usbvideo/vicam.c @@ -877,7 +877,8 @@ vicam_probe( struct usb_interface *intf, const struct usb_device_id *id) return -EIO; } - printk(KERN_INFO "ViCam webcam driver now controlling video device %d\n",cam->vdev.minor); + printk(KERN_INFO "ViCam webcam driver now controlling video device %d\n", + cam->vdev.num); usb_set_intfdata (intf, cam); diff --git a/drivers/media/video/usbvision/usbvision-i2c.c b/drivers/media/video/usbvision/usbvision-i2c.c index 92427fdc1459..9907b9aff2b9 100644 --- a/drivers/media/video/usbvision/usbvision-i2c.c +++ b/drivers/media/video/usbvision/usbvision-i2c.c @@ -236,7 +236,7 @@ int usbvision_i2c_register(struct usb_usbvision *usbvision) sizeof(struct i2c_client)); sprintf(usbvision->i2c_adap.name + strlen(usbvision->i2c_adap.name), - " #%d", usbvision->vdev->minor & 0x1f); + " #%d", usbvision->vdev->num); PDEBUG(DBG_I2C,"Adaptername: %s", usbvision->i2c_adap.name); usbvision->i2c_adap.dev.parent = &usbvision->dev->dev; diff --git a/drivers/media/video/usbvision/usbvision-video.c b/drivers/media/video/usbvision/usbvision-video.c index 77aeb39b2750..d185b57fdcd0 100644 --- a/drivers/media/video/usbvision/usbvision-video.c +++ b/drivers/media/video/usbvision/usbvision-video.c @@ -1440,7 +1440,7 @@ static void usbvision_unregister_video(struct usb_usbvision *usbvision) // vbi Device: if (usbvision->vbi) { PDEBUG(DBG_PROBE, "unregister /dev/vbi%d [v4l2]", - usbvision->vbi->minor & 0x1f); + usbvision->vbi->num); if (usbvision->vbi->minor != -1) { video_unregister_device(usbvision->vbi); } else { @@ -1452,7 +1452,7 @@ static void usbvision_unregister_video(struct usb_usbvision *usbvision) // Radio Device: if (usbvision->rdev) { PDEBUG(DBG_PROBE, "unregister /dev/radio%d [v4l2]", - usbvision->rdev->minor & 0x1f); + usbvision->rdev->num); if (usbvision->rdev->minor != -1) { video_unregister_device(usbvision->rdev); } else { @@ -1464,7 +1464,7 @@ static void usbvision_unregister_video(struct usb_usbvision *usbvision) // Video Device: if (usbvision->vdev) { PDEBUG(DBG_PROBE, "unregister /dev/video%d [v4l2]", - usbvision->vdev->minor & 0x1f); + usbvision->vdev->num); if (usbvision->vdev->minor != -1) { video_unregister_device(usbvision->vdev); } else { @@ -1490,7 +1490,7 @@ static int __devinit usbvision_register_video(struct usb_usbvision *usbvision) goto err_exit; } printk(KERN_INFO "USBVision[%d]: registered USBVision Video device /dev/video%d [v4l2]\n", - usbvision->nr,usbvision->vdev->minor & 0x1f); + usbvision->nr, usbvision->vdev->num); // Radio Device: if (usbvision_device_data[usbvision->DevModel].Radio) { @@ -1507,7 +1507,7 @@ static int __devinit usbvision_register_video(struct usb_usbvision *usbvision) goto err_exit; } printk(KERN_INFO "USBVision[%d]: registered USBVision Radio device /dev/radio%d [v4l2]\n", - usbvision->nr, usbvision->rdev->minor & 0x1f); + usbvision->nr, usbvision->rdev->num); } // vbi Device: if (usbvision_device_data[usbvision->DevModel].vbi) { @@ -1523,7 +1523,7 @@ static int __devinit usbvision_register_video(struct usb_usbvision *usbvision) goto err_exit; } printk(KERN_INFO "USBVision[%d]: registered USBVision VBI device /dev/vbi%d [v4l2] (Not Working Yet!)\n", - usbvision->nr,usbvision->vbi->minor & 0x1f); + usbvision->nr, usbvision->vbi->num); } // all done return 0; diff --git a/drivers/media/video/uvc/uvc_v4l2.c b/drivers/media/video/uvc/uvc_v4l2.c index 78e4c4e09d89..758dfefaba8d 100644 --- a/drivers/media/video/uvc/uvc_v4l2.c +++ b/drivers/media/video/uvc/uvc_v4l2.c @@ -464,7 +464,7 @@ static int uvc_v4l2_release(struct inode *inode, struct file *file) return 0; } -static int uvc_v4l2_do_ioctl(struct inode *inode, struct file *file, +static int __uvc_v4l2_do_ioctl(struct file *file, unsigned int cmd, void *arg) { struct video_device *vdev = video_devdata(file); @@ -978,8 +978,8 @@ static int uvc_v4l2_do_ioctl(struct inode *inode, struct file *file, return uvc_xu_ctrl_query(video, arg, 1); default: - if ((ret = v4l_compat_translate_ioctl(inode, file, cmd, arg, - uvc_v4l2_do_ioctl)) == -ENOIOCTLCMD) + if ((ret = v4l_compat_translate_ioctl(file, cmd, arg, + __uvc_v4l2_do_ioctl)) == -ENOIOCTLCMD) uvc_trace(UVC_TRACE_IOCTL, "Unknown ioctl 0x%08x\n", cmd); return ret; @@ -988,6 +988,12 @@ static int uvc_v4l2_do_ioctl(struct inode *inode, struct file *file, return ret; } +static int uvc_v4l2_do_ioctl(struct inode *inode, struct file *file, + unsigned int cmd, void *arg) +{ + return __uvc_v4l2_do_ioctl(file, cmd, arg); +} + static int uvc_v4l2_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg) { diff --git a/drivers/media/video/v4l1-compat.c b/drivers/media/video/v4l1-compat.c index 928cb4037372..f13c0a9d684f 100644 --- a/drivers/media/video/v4l1-compat.c +++ b/drivers/media/video/v4l1-compat.c @@ -57,8 +57,7 @@ MODULE_LICENSE("GPL"); */ static int -get_v4l_control(struct inode *inode, - struct file *file, +get_v4l_control(struct file *file, int cid, v4l2_kioctl drv) { @@ -67,12 +66,12 @@ get_v4l_control(struct inode *inode, int err; qctrl2.id = cid; - err = drv(inode, file, VIDIOC_QUERYCTRL, &qctrl2); + err = drv(file, VIDIOC_QUERYCTRL, &qctrl2); if (err < 0) dprintk("VIDIOC_QUERYCTRL: %d\n", err); if (err == 0 && !(qctrl2.flags & V4L2_CTRL_FLAG_DISABLED)) { ctrl2.id = qctrl2.id; - err = drv(inode, file, VIDIOC_G_CTRL, &ctrl2); + err = drv(file, VIDIOC_G_CTRL, &ctrl2); if (err < 0) { dprintk("VIDIOC_G_CTRL: %d\n", err); return 0; @@ -85,8 +84,7 @@ get_v4l_control(struct inode *inode, } static int -set_v4l_control(struct inode *inode, - struct file *file, +set_v4l_control(struct file *file, int cid, int value, v4l2_kioctl drv) @@ -96,7 +94,7 @@ set_v4l_control(struct inode *inode, int err; qctrl2.id = cid; - err = drv(inode, file, VIDIOC_QUERYCTRL, &qctrl2); + err = drv(file, VIDIOC_QUERYCTRL, &qctrl2); if (err < 0) dprintk("VIDIOC_QUERYCTRL: %d\n", err); if (err == 0 && @@ -114,7 +112,7 @@ set_v4l_control(struct inode *inode, + 32767) / 65535; ctrl2.value += qctrl2.minimum; - err = drv(inode, file, VIDIOC_S_CTRL, &ctrl2); + err = drv(file, VIDIOC_S_CTRL, &ctrl2); if (err < 0) dprintk("VIDIOC_S_CTRL: %d\n", err); } @@ -222,7 +220,6 @@ static int poll_one(struct file *file, struct poll_wqueues *pwq) } static int count_inputs( - struct inode *inode, struct file *file, v4l2_kioctl drv) { @@ -232,14 +229,13 @@ static int count_inputs( for (i = 0;; i++) { memset(&input2, 0, sizeof(input2)); input2.index = i; - if (0 != drv(inode, file, VIDIOC_ENUMINPUT, &input2)) + if (0 != drv(file, VIDIOC_ENUMINPUT, &input2)) break; } return i; } static int check_size( - struct inode *inode, struct file *file, v4l2_kioctl drv, int *maxw, @@ -252,14 +248,14 @@ static int check_size( memset(&fmt2, 0, sizeof(fmt2)); desc2.type = V4L2_BUF_TYPE_VIDEO_CAPTURE; - if (0 != drv(inode, file, VIDIOC_ENUM_FMT, &desc2)) + if (0 != drv(file, VIDIOC_ENUM_FMT, &desc2)) goto done; fmt2.type = V4L2_BUF_TYPE_VIDEO_CAPTURE; fmt2.fmt.pix.width = 10000; fmt2.fmt.pix.height = 10000; fmt2.fmt.pix.pixelformat = desc2.pixelformat; - if (0 != drv(inode, file, VIDIOC_TRY_FMT, &fmt2)) + if (0 != drv(file, VIDIOC_TRY_FMT, &fmt2)) goto done; *maxw = fmt2.fmt.pix.width; @@ -273,7 +269,6 @@ done: static noinline int v4l1_compat_get_capabilities( struct video_capability *cap, - struct inode *inode, struct file *file, v4l2_kioctl drv) { @@ -289,13 +284,13 @@ static noinline int v4l1_compat_get_capabilities( memset(cap, 0, sizeof(*cap)); memset(&fbuf, 0, sizeof(fbuf)); - err = drv(inode, file, VIDIOC_QUERYCAP, cap2); + err = drv(file, VIDIOC_QUERYCAP, cap2); if (err < 0) { dprintk("VIDIOCGCAP / VIDIOC_QUERYCAP: %d\n", err); goto done; } if (cap2->capabilities & V4L2_CAP_VIDEO_OVERLAY) { - err = drv(inode, file, VIDIOC_G_FBUF, &fbuf); + err = drv(file, VIDIOC_G_FBUF, &fbuf); if (err < 0) { dprintk("VIDIOCGCAP / VIDIOC_G_FBUF: %d\n", err); memset(&fbuf, 0, sizeof(fbuf)); @@ -317,8 +312,8 @@ static noinline int v4l1_compat_get_capabilities( if (fbuf.capability & V4L2_FBUF_CAP_LIST_CLIPPING) cap->type |= VID_TYPE_CLIPPING; - cap->channels = count_inputs(inode, file, drv); - check_size(inode, file, drv, + cap->channels = count_inputs(file, drv); + check_size(file, drv, &cap->maxwidth, &cap->maxheight); cap->audios = 0; /* FIXME */ cap->minwidth = 48; /* FIXME */ @@ -331,7 +326,6 @@ done: static noinline int v4l1_compat_get_frame_buffer( struct video_buffer *buffer, - struct inode *inode, struct file *file, v4l2_kioctl drv) { @@ -341,7 +335,7 @@ static noinline int v4l1_compat_get_frame_buffer( memset(buffer, 0, sizeof(*buffer)); memset(&fbuf, 0, sizeof(fbuf)); - err = drv(inode, file, VIDIOC_G_FBUF, &fbuf); + err = drv(file, VIDIOC_G_FBUF, &fbuf); if (err < 0) { dprintk("VIDIOCGFBUF / VIDIOC_G_FBUF: %d\n", err); goto done; @@ -386,7 +380,6 @@ done: static noinline int v4l1_compat_set_frame_buffer( struct video_buffer *buffer, - struct inode *inode, struct file *file, v4l2_kioctl drv) { @@ -415,7 +408,7 @@ static noinline int v4l1_compat_set_frame_buffer( break; } fbuf.fmt.bytesperline = buffer->bytesperline; - err = drv(inode, file, VIDIOC_S_FBUF, &fbuf); + err = drv(file, VIDIOC_S_FBUF, &fbuf); if (err < 0) dprintk("VIDIOCSFBUF / VIDIOC_S_FBUF: %d\n", err); return err; @@ -423,7 +416,6 @@ static noinline int v4l1_compat_set_frame_buffer( static noinline int v4l1_compat_get_win_cap_dimensions( struct video_window *win, - struct inode *inode, struct file *file, v4l2_kioctl drv) { @@ -438,7 +430,7 @@ static noinline int v4l1_compat_get_win_cap_dimensions( memset(win, 0, sizeof(*win)); fmt->type = V4L2_BUF_TYPE_VIDEO_OVERLAY; - err = drv(inode, file, VIDIOC_G_FMT, fmt); + err = drv(file, VIDIOC_G_FMT, fmt); if (err < 0) dprintk("VIDIOCGWIN / VIDIOC_G_WIN: %d\n", err); if (err == 0) { @@ -453,7 +445,7 @@ static noinline int v4l1_compat_get_win_cap_dimensions( } fmt->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; - err = drv(inode, file, VIDIOC_G_FMT, fmt); + err = drv(file, VIDIOC_G_FMT, fmt); if (err < 0) { dprintk("VIDIOCGWIN / VIDIOC_G_FMT: %d\n", err); goto done; @@ -472,7 +464,6 @@ done: static noinline int v4l1_compat_set_win_cap_dimensions( struct video_window *win, - struct inode *inode, struct file *file, v4l2_kioctl drv) { @@ -485,8 +476,8 @@ static noinline int v4l1_compat_set_win_cap_dimensions( return err; } fmt->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; - drv(inode, file, VIDIOC_STREAMOFF, &fmt->type); - err1 = drv(inode, file, VIDIOC_G_FMT, fmt); + drv(file, VIDIOC_STREAMOFF, &fmt->type); + err1 = drv(file, VIDIOC_G_FMT, fmt); if (err1 < 0) dprintk("VIDIOCSWIN / VIDIOC_G_FMT: %d\n", err1); if (err1 == 0) { @@ -494,7 +485,7 @@ static noinline int v4l1_compat_set_win_cap_dimensions( fmt->fmt.pix.height = win->height; fmt->fmt.pix.field = V4L2_FIELD_ANY; fmt->fmt.pix.bytesperline = 0; - err = drv(inode, file, VIDIOC_S_FMT, fmt); + err = drv(file, VIDIOC_S_FMT, fmt); if (err < 0) dprintk("VIDIOCSWIN / VIDIOC_S_FMT #1: %d\n", err); @@ -511,7 +502,7 @@ static noinline int v4l1_compat_set_win_cap_dimensions( fmt->fmt.win.chromakey = win->chromakey; fmt->fmt.win.clips = (void __user *)win->clips; fmt->fmt.win.clipcount = win->clipcount; - err2 = drv(inode, file, VIDIOC_S_FMT, fmt); + err2 = drv(file, VIDIOC_S_FMT, fmt); if (err2 < 0) dprintk("VIDIOCSWIN / VIDIOC_S_FMT #2: %d\n", err2); @@ -525,7 +516,6 @@ static noinline int v4l1_compat_set_win_cap_dimensions( static noinline int v4l1_compat_turn_preview_on_off( int *on, - struct inode *inode, struct file *file, v4l2_kioctl drv) { @@ -536,9 +526,9 @@ static noinline int v4l1_compat_turn_preview_on_off( /* dirty hack time. But v4l1 has no STREAMOFF * equivalent in the API, and this one at * least comes close ... */ - drv(inode, file, VIDIOC_STREAMOFF, &captype); + drv(file, VIDIOC_STREAMOFF, &captype); } - err = drv(inode, file, VIDIOC_OVERLAY, on); + err = drv(file, VIDIOC_OVERLAY, on); if (err < 0) dprintk("VIDIOCCAPTURE / VIDIOC_PREVIEW: %d\n", err); return err; @@ -546,7 +536,6 @@ static noinline int v4l1_compat_turn_preview_on_off( static noinline int v4l1_compat_get_input_info( struct video_channel *chan, - struct inode *inode, struct file *file, v4l2_kioctl drv) { @@ -556,7 +545,7 @@ static noinline int v4l1_compat_get_input_info( memset(&input2, 0, sizeof(input2)); input2.index = chan->channel; - err = drv(inode, file, VIDIOC_ENUMINPUT, &input2); + err = drv(file, VIDIOC_ENUMINPUT, &input2); if (err < 0) { dprintk("VIDIOCGCHAN / VIDIOC_ENUMINPUT: " "channel=%d err=%d\n", chan->channel, err); @@ -578,7 +567,7 @@ static noinline int v4l1_compat_get_input_info( break; } chan->norm = 0; - err = drv(inode, file, VIDIOC_G_STD, &sid); + err = drv(file, VIDIOC_G_STD, &sid); if (err < 0) dprintk("VIDIOCGCHAN / VIDIOC_G_STD: %d\n", err); if (err == 0) { @@ -595,14 +584,13 @@ done: static noinline int v4l1_compat_set_input( struct video_channel *chan, - struct inode *inode, struct file *file, v4l2_kioctl drv) { int err; v4l2_std_id sid = 0; - err = drv(inode, file, VIDIOC_S_INPUT, &chan->channel); + err = drv(file, VIDIOC_S_INPUT, &chan->channel); if (err < 0) dprintk("VIDIOCSCHAN / VIDIOC_S_INPUT: %d\n", err); switch (chan->norm) { @@ -617,7 +605,7 @@ static noinline int v4l1_compat_set_input( break; } if (0 != sid) { - err = drv(inode, file, VIDIOC_S_STD, &sid); + err = drv(file, VIDIOC_S_STD, &sid); if (err < 0) dprintk("VIDIOCSCHAN / VIDIOC_S_STD: %d\n", err); } @@ -626,7 +614,6 @@ static noinline int v4l1_compat_set_input( static noinline int v4l1_compat_get_picture( struct video_picture *pict, - struct inode *inode, struct file *file, v4l2_kioctl drv) { @@ -639,19 +626,19 @@ static noinline int v4l1_compat_get_picture( return err; } - pict->brightness = get_v4l_control(inode, file, + pict->brightness = get_v4l_control(file, V4L2_CID_BRIGHTNESS, drv); - pict->hue = get_v4l_control(inode, file, + pict->hue = get_v4l_control(file, V4L2_CID_HUE, drv); - pict->contrast = get_v4l_control(inode, file, + pict->contrast = get_v4l_control(file, V4L2_CID_CONTRAST, drv); - pict->colour = get_v4l_control(inode, file, + pict->colour = get_v4l_control(file, V4L2_CID_SATURATION, drv); - pict->whiteness = get_v4l_control(inode, file, + pict->whiteness = get_v4l_control(file, V4L2_CID_WHITENESS, drv); fmt->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; - err = drv(inode, file, VIDIOC_G_FMT, fmt); + err = drv(file, VIDIOC_G_FMT, fmt); if (err < 0) { dprintk("VIDIOCGPICT / VIDIOC_G_FMT: %d\n", err); goto done; @@ -669,7 +656,6 @@ done: static noinline int v4l1_compat_set_picture( struct video_picture *pict, - struct inode *inode, struct file *file, v4l2_kioctl drv) { @@ -685,15 +671,15 @@ static noinline int v4l1_compat_set_picture( } memset(&fbuf, 0, sizeof(fbuf)); - set_v4l_control(inode, file, + set_v4l_control(file, V4L2_CID_BRIGHTNESS, pict->brightness, drv); - set_v4l_control(inode, file, + set_v4l_control(file, V4L2_CID_HUE, pict->hue, drv); - set_v4l_control(inode, file, + set_v4l_control(file, V4L2_CID_CONTRAST, pict->contrast, drv); - set_v4l_control(inode, file, + set_v4l_control(file, V4L2_CID_SATURATION, pict->colour, drv); - set_v4l_control(inode, file, + set_v4l_control(file, V4L2_CID_WHITENESS, pict->whiteness, drv); /* * V4L1 uses this ioctl to set both memory capture and overlay @@ -703,7 +689,7 @@ static noinline int v4l1_compat_set_picture( */ fmt->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; - err = drv(inode, file, VIDIOC_G_FMT, fmt); + err = drv(file, VIDIOC_G_FMT, fmt); /* If VIDIOC_G_FMT failed, then the driver likely doesn't support memory capture. Trying to set the memory capture parameters would be pointless. */ @@ -714,13 +700,13 @@ static noinline int v4l1_compat_set_picture( palette_to_pixelformat(pict->palette)) { fmt->fmt.pix.pixelformat = palette_to_pixelformat( pict->palette); - mem_err = drv(inode, file, VIDIOC_S_FMT, fmt); + mem_err = drv(file, VIDIOC_S_FMT, fmt); if (mem_err < 0) dprintk("VIDIOCSPICT / VIDIOC_S_FMT: %d\n", mem_err); } - err = drv(inode, file, VIDIOC_G_FBUF, &fbuf); + err = drv(file, VIDIOC_G_FBUF, &fbuf); /* If VIDIOC_G_FBUF failed, then the driver likely doesn't support overlay. Trying to set the overlay parameters would be quite pointless. */ @@ -731,7 +717,7 @@ static noinline int v4l1_compat_set_picture( palette_to_pixelformat(pict->palette)) { fbuf.fmt.pixelformat = palette_to_pixelformat( pict->palette); - ovl_err = drv(inode, file, VIDIOC_S_FBUF, &fbuf); + ovl_err = drv(file, VIDIOC_S_FBUF, &fbuf); if (ovl_err < 0) dprintk("VIDIOCSPICT / VIDIOC_S_FBUF: %d\n", ovl_err); @@ -752,7 +738,6 @@ static noinline int v4l1_compat_set_picture( static noinline int v4l1_compat_get_tuner( struct video_tuner *tun, - struct inode *inode, struct file *file, v4l2_kioctl drv) { @@ -762,7 +747,7 @@ static noinline int v4l1_compat_get_tuner( v4l2_std_id sid; memset(&tun2, 0, sizeof(tun2)); - err = drv(inode, file, VIDIOC_G_TUNER, &tun2); + err = drv(file, VIDIOC_G_TUNER, &tun2); if (err < 0) { dprintk("VIDIOCGTUNER / VIDIOC_G_TUNER: %d\n", err); goto done; @@ -778,7 +763,7 @@ static noinline int v4l1_compat_get_tuner( for (i = 0; i < 64; i++) { memset(&std2, 0, sizeof(std2)); std2.index = i; - if (0 != drv(inode, file, VIDIOC_ENUMSTD, &std2)) + if (0 != drv(file, VIDIOC_ENUMSTD, &std2)) break; if (std2.id & V4L2_STD_PAL) tun->flags |= VIDEO_TUNER_PAL; @@ -788,7 +773,7 @@ static noinline int v4l1_compat_get_tuner( tun->flags |= VIDEO_TUNER_SECAM; } - err = drv(inode, file, VIDIOC_G_STD, &sid); + err = drv(file, VIDIOC_G_STD, &sid); if (err < 0) dprintk("VIDIOCGTUNER / VIDIOC_G_STD: %d\n", err); if (err == 0) { @@ -811,7 +796,6 @@ done: static noinline int v4l1_compat_select_tuner( struct video_tuner *tun, - struct inode *inode, struct file *file, v4l2_kioctl drv) { @@ -821,7 +805,7 @@ static noinline int v4l1_compat_select_tuner( t.index = tun->tuner; - err = drv(inode, file, VIDIOC_S_INPUT, &t); + err = drv(file, VIDIOC_S_INPUT, &t); if (err < 0) dprintk("VIDIOCSTUNER / VIDIOC_S_INPUT: %d\n", err); return err; @@ -829,7 +813,6 @@ static noinline int v4l1_compat_select_tuner( static noinline int v4l1_compat_get_frequency( unsigned long *freq, - struct inode *inode, struct file *file, v4l2_kioctl drv) { @@ -838,7 +821,7 @@ static noinline int v4l1_compat_get_frequency( memset(&freq2, 0, sizeof(freq2)); freq2.tuner = 0; - err = drv(inode, file, VIDIOC_G_FREQUENCY, &freq2); + err = drv(file, VIDIOC_G_FREQUENCY, &freq2); if (err < 0) dprintk("VIDIOCGFREQ / VIDIOC_G_FREQUENCY: %d\n", err); if (0 == err) @@ -848,7 +831,6 @@ static noinline int v4l1_compat_get_frequency( static noinline int v4l1_compat_set_frequency( unsigned long *freq, - struct inode *inode, struct file *file, v4l2_kioctl drv) { @@ -856,9 +838,9 @@ static noinline int v4l1_compat_set_frequency( struct v4l2_frequency freq2; memset(&freq2, 0, sizeof(freq2)); - drv(inode, file, VIDIOC_G_FREQUENCY, &freq2); + drv(file, VIDIOC_G_FREQUENCY, &freq2); freq2.frequency = *freq; - err = drv(inode, file, VIDIOC_S_FREQUENCY, &freq2); + err = drv(file, VIDIOC_S_FREQUENCY, &freq2); if (err < 0) dprintk("VIDIOCSFREQ / VIDIOC_S_FREQUENCY: %d\n", err); return err; @@ -866,7 +848,6 @@ static noinline int v4l1_compat_set_frequency( static noinline int v4l1_compat_get_audio( struct video_audio *aud, - struct inode *inode, struct file *file, v4l2_kioctl drv) { @@ -876,7 +857,7 @@ static noinline int v4l1_compat_get_audio( struct v4l2_tuner tun2; memset(&aud2, 0, sizeof(aud2)); - err = drv(inode, file, VIDIOC_G_AUDIO, &aud2); + err = drv(file, VIDIOC_G_AUDIO, &aud2); if (err < 0) { dprintk("VIDIOCGAUDIO / VIDIOC_G_AUDIO: %d\n", err); goto done; @@ -886,27 +867,27 @@ static noinline int v4l1_compat_get_audio( aud->name[sizeof(aud->name) - 1] = 0; aud->audio = aud2.index; aud->flags = 0; - i = get_v4l_control(inode, file, V4L2_CID_AUDIO_VOLUME, drv); + i = get_v4l_control(file, V4L2_CID_AUDIO_VOLUME, drv); if (i >= 0) { aud->volume = i; aud->flags |= VIDEO_AUDIO_VOLUME; } - i = get_v4l_control(inode, file, V4L2_CID_AUDIO_BASS, drv); + i = get_v4l_control(file, V4L2_CID_AUDIO_BASS, drv); if (i >= 0) { aud->bass = i; aud->flags |= VIDEO_AUDIO_BASS; } - i = get_v4l_control(inode, file, V4L2_CID_AUDIO_TREBLE, drv); + i = get_v4l_control(file, V4L2_CID_AUDIO_TREBLE, drv); if (i >= 0) { aud->treble = i; aud->flags |= VIDEO_AUDIO_TREBLE; } - i = get_v4l_control(inode, file, V4L2_CID_AUDIO_BALANCE, drv); + i = get_v4l_control(file, V4L2_CID_AUDIO_BALANCE, drv); if (i >= 0) { aud->balance = i; aud->flags |= VIDEO_AUDIO_BALANCE; } - i = get_v4l_control(inode, file, V4L2_CID_AUDIO_MUTE, drv); + i = get_v4l_control(file, V4L2_CID_AUDIO_MUTE, drv); if (i >= 0) { if (i) aud->flags |= VIDEO_AUDIO_MUTE; @@ -914,13 +895,13 @@ static noinline int v4l1_compat_get_audio( } aud->step = 1; qctrl2.id = V4L2_CID_AUDIO_VOLUME; - if (drv(inode, file, VIDIOC_QUERYCTRL, &qctrl2) == 0 && + if (drv(file, VIDIOC_QUERYCTRL, &qctrl2) == 0 && !(qctrl2.flags & V4L2_CTRL_FLAG_DISABLED)) aud->step = qctrl2.step; aud->mode = 0; memset(&tun2, 0, sizeof(tun2)); - err = drv(inode, file, VIDIOC_G_TUNER, &tun2); + err = drv(file, VIDIOC_G_TUNER, &tun2); if (err < 0) { dprintk("VIDIOCGAUDIO / VIDIOC_G_TUNER: %d\n", err); err = 0; @@ -939,7 +920,6 @@ done: static noinline int v4l1_compat_set_audio( struct video_audio *aud, - struct inode *inode, struct file *file, v4l2_kioctl drv) { @@ -951,24 +931,24 @@ static noinline int v4l1_compat_set_audio( memset(&tun2, 0, sizeof(tun2)); aud2.index = aud->audio; - err = drv(inode, file, VIDIOC_S_AUDIO, &aud2); + err = drv(file, VIDIOC_S_AUDIO, &aud2); if (err < 0) { dprintk("VIDIOCSAUDIO / VIDIOC_S_AUDIO: %d\n", err); goto done; } - set_v4l_control(inode, file, V4L2_CID_AUDIO_VOLUME, + set_v4l_control(file, V4L2_CID_AUDIO_VOLUME, aud->volume, drv); - set_v4l_control(inode, file, V4L2_CID_AUDIO_BASS, + set_v4l_control(file, V4L2_CID_AUDIO_BASS, aud->bass, drv); - set_v4l_control(inode, file, V4L2_CID_AUDIO_TREBLE, + set_v4l_control(file, V4L2_CID_AUDIO_TREBLE, aud->treble, drv); - set_v4l_control(inode, file, V4L2_CID_AUDIO_BALANCE, + set_v4l_control(file, V4L2_CID_AUDIO_BALANCE, aud->balance, drv); - set_v4l_control(inode, file, V4L2_CID_AUDIO_MUTE, + set_v4l_control(file, V4L2_CID_AUDIO_MUTE, !!(aud->flags & VIDEO_AUDIO_MUTE), drv); - err = drv(inode, file, VIDIOC_G_TUNER, &tun2); + err = drv(file, VIDIOC_G_TUNER, &tun2); if (err < 0) dprintk("VIDIOCSAUDIO / VIDIOC_G_TUNER: %d\n", err); if (err == 0) { @@ -985,7 +965,7 @@ static noinline int v4l1_compat_set_audio( tun2.audmode = V4L2_TUNER_MODE_LANG2; break; } - err = drv(inode, file, VIDIOC_S_TUNER, &tun2); + err = drv(file, VIDIOC_S_TUNER, &tun2); if (err < 0) dprintk("VIDIOCSAUDIO / VIDIOC_S_TUNER: %d\n", err); } @@ -996,7 +976,6 @@ done: static noinline int v4l1_compat_capture_frame( struct video_mmap *mm, - struct inode *inode, struct file *file, v4l2_kioctl drv) { @@ -1013,7 +992,7 @@ static noinline int v4l1_compat_capture_frame( memset(&buf, 0, sizeof(buf)); fmt->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; - err = drv(inode, file, VIDIOC_G_FMT, fmt); + err = drv(file, VIDIOC_G_FMT, fmt); if (err < 0) { dprintk("VIDIOCMCAPTURE / VIDIOC_G_FMT: %d\n", err); goto done; @@ -1029,7 +1008,7 @@ static noinline int v4l1_compat_capture_frame( palette_to_pixelformat(mm->format); fmt->fmt.pix.field = V4L2_FIELD_ANY; fmt->fmt.pix.bytesperline = 0; - err = drv(inode, file, VIDIOC_S_FMT, fmt); + err = drv(file, VIDIOC_S_FMT, fmt); if (err < 0) { dprintk("VIDIOCMCAPTURE / VIDIOC_S_FMT: %d\n", err); goto done; @@ -1037,17 +1016,17 @@ static noinline int v4l1_compat_capture_frame( } buf.index = mm->frame; buf.type = V4L2_BUF_TYPE_VIDEO_CAPTURE; - err = drv(inode, file, VIDIOC_QUERYBUF, &buf); + err = drv(file, VIDIOC_QUERYBUF, &buf); if (err < 0) { dprintk("VIDIOCMCAPTURE / VIDIOC_QUERYBUF: %d\n", err); goto done; } - err = drv(inode, file, VIDIOC_QBUF, &buf); + err = drv(file, VIDIOC_QBUF, &buf); if (err < 0) { dprintk("VIDIOCMCAPTURE / VIDIOC_QBUF: %d\n", err); goto done; } - err = drv(inode, file, VIDIOC_STREAMON, &captype); + err = drv(file, VIDIOC_STREAMON, &captype); if (err < 0) dprintk("VIDIOCMCAPTURE / VIDIOC_STREAMON: %d\n", err); done: @@ -1057,7 +1036,6 @@ done: static noinline int v4l1_compat_sync( int *i, - struct inode *inode, struct file *file, v4l2_kioctl drv) { @@ -1069,7 +1047,7 @@ static noinline int v4l1_compat_sync( memset(&buf, 0, sizeof(buf)); buf.index = *i; buf.type = V4L2_BUF_TYPE_VIDEO_CAPTURE; - err = drv(inode, file, VIDIOC_QUERYBUF, &buf); + err = drv(file, VIDIOC_QUERYBUF, &buf); if (err < 0) { /* No such buffer */ dprintk("VIDIOCSYNC / VIDIOC_QUERYBUF: %d\n", err); @@ -1082,7 +1060,7 @@ static noinline int v4l1_compat_sync( } /* make sure capture actually runs so we don't block forever */ - err = drv(inode, file, VIDIOC_STREAMON, &captype); + err = drv(file, VIDIOC_STREAMON, &captype); if (err < 0) { dprintk("VIDIOCSYNC / VIDIOC_STREAMON: %d\n", err); goto done; @@ -1096,7 +1074,7 @@ static noinline int v4l1_compat_sync( if (err < 0 || /* error or sleep was interrupted */ err == 0) /* timeout? Shouldn't occur. */ break; - err = drv(inode, file, VIDIOC_QUERYBUF, &buf); + err = drv(file, VIDIOC_QUERYBUF, &buf); if (err < 0) dprintk("VIDIOCSYNC / VIDIOC_QUERYBUF: %d\n", err); } @@ -1104,7 +1082,7 @@ static noinline int v4l1_compat_sync( if (!(buf.flags & V4L2_BUF_FLAG_DONE)) /* not done */ goto done; do { - err = drv(inode, file, VIDIOC_DQBUF, &buf); + err = drv(file, VIDIOC_DQBUF, &buf); if (err < 0) dprintk("VIDIOCSYNC / VIDIOC_DQBUF: %d\n", err); } while (err == 0 && buf.index != *i); @@ -1114,7 +1092,6 @@ done: static noinline int v4l1_compat_get_vbi_format( struct vbi_format *fmt, - struct inode *inode, struct file *file, v4l2_kioctl drv) { @@ -1128,7 +1105,7 @@ static noinline int v4l1_compat_get_vbi_format( } fmt2->type = V4L2_BUF_TYPE_VBI_CAPTURE; - err = drv(inode, file, VIDIOC_G_FMT, fmt2); + err = drv(file, VIDIOC_G_FMT, fmt2); if (err < 0) { dprintk("VIDIOCGVBIFMT / VIDIOC_G_FMT: %d\n", err); goto done; @@ -1153,7 +1130,6 @@ done: static noinline int v4l1_compat_set_vbi_format( struct vbi_format *fmt, - struct inode *inode, struct file *file, v4l2_kioctl drv) { @@ -1179,7 +1155,7 @@ static noinline int v4l1_compat_set_vbi_format( fmt2->fmt.vbi.start[1] = fmt->start[1]; fmt2->fmt.vbi.count[1] = fmt->count[1]; fmt2->fmt.vbi.flags = fmt->flags; - err = drv(inode, file, VIDIOC_TRY_FMT, fmt2); + err = drv(file, VIDIOC_TRY_FMT, fmt2); if (err < 0) { dprintk("VIDIOCSVBIFMT / VIDIOC_TRY_FMT: %d\n", err); goto done; @@ -1196,7 +1172,7 @@ static noinline int v4l1_compat_set_vbi_format( err = -EINVAL; goto done; } - err = drv(inode, file, VIDIOC_S_FMT, fmt2); + err = drv(file, VIDIOC_S_FMT, fmt2); if (err < 0) dprintk("VIDIOCSVBIFMT / VIDIOC_S_FMT: %d\n", err); done: @@ -1208,8 +1184,7 @@ done: * This function is exported. */ int -v4l_compat_translate_ioctl(struct inode *inode, - struct file *file, +v4l_compat_translate_ioctl(struct file *file, int cmd, void *arg, v4l2_kioctl drv) @@ -1218,64 +1193,64 @@ v4l_compat_translate_ioctl(struct inode *inode, switch (cmd) { case VIDIOCGCAP: /* capability */ - err = v4l1_compat_get_capabilities(arg, inode, file, drv); + err = v4l1_compat_get_capabilities(arg, file, drv); break; case VIDIOCGFBUF: /* get frame buffer */ - err = v4l1_compat_get_frame_buffer(arg, inode, file, drv); + err = v4l1_compat_get_frame_buffer(arg, file, drv); break; case VIDIOCSFBUF: /* set frame buffer */ - err = v4l1_compat_set_frame_buffer(arg, inode, file, drv); + err = v4l1_compat_set_frame_buffer(arg, file, drv); break; case VIDIOCGWIN: /* get window or capture dimensions */ - err = v4l1_compat_get_win_cap_dimensions(arg, inode, file, drv); + err = v4l1_compat_get_win_cap_dimensions(arg, file, drv); break; case VIDIOCSWIN: /* set window and/or capture dimensions */ - err = v4l1_compat_set_win_cap_dimensions(arg, inode, file, drv); + err = v4l1_compat_set_win_cap_dimensions(arg, file, drv); break; case VIDIOCCAPTURE: /* turn on/off preview */ - err = v4l1_compat_turn_preview_on_off(arg, inode, file, drv); + err = v4l1_compat_turn_preview_on_off(arg, file, drv); break; case VIDIOCGCHAN: /* get input information */ - err = v4l1_compat_get_input_info(arg, inode, file, drv); + err = v4l1_compat_get_input_info(arg, file, drv); break; case VIDIOCSCHAN: /* set input */ - err = v4l1_compat_set_input(arg, inode, file, drv); + err = v4l1_compat_set_input(arg, file, drv); break; case VIDIOCGPICT: /* get tone controls & partial capture format */ - err = v4l1_compat_get_picture(arg, inode, file, drv); + err = v4l1_compat_get_picture(arg, file, drv); break; case VIDIOCSPICT: /* set tone controls & partial capture format */ - err = v4l1_compat_set_picture(arg, inode, file, drv); + err = v4l1_compat_set_picture(arg, file, drv); break; case VIDIOCGTUNER: /* get tuner information */ - err = v4l1_compat_get_tuner(arg, inode, file, drv); + err = v4l1_compat_get_tuner(arg, file, drv); break; case VIDIOCSTUNER: /* select a tuner input */ - err = v4l1_compat_select_tuner(arg, inode, file, drv); + err = v4l1_compat_select_tuner(arg, file, drv); break; case VIDIOCGFREQ: /* get frequency */ - err = v4l1_compat_get_frequency(arg, inode, file, drv); + err = v4l1_compat_get_frequency(arg, file, drv); break; case VIDIOCSFREQ: /* set frequency */ - err = v4l1_compat_set_frequency(arg, inode, file, drv); + err = v4l1_compat_set_frequency(arg, file, drv); break; case VIDIOCGAUDIO: /* get audio properties/controls */ - err = v4l1_compat_get_audio(arg, inode, file, drv); + err = v4l1_compat_get_audio(arg, file, drv); break; case VIDIOCSAUDIO: /* set audio controls */ - err = v4l1_compat_set_audio(arg, inode, file, drv); + err = v4l1_compat_set_audio(arg, file, drv); break; case VIDIOCMCAPTURE: /* capture a frame */ - err = v4l1_compat_capture_frame(arg, inode, file, drv); + err = v4l1_compat_capture_frame(arg, file, drv); break; case VIDIOCSYNC: /* wait for a frame */ - err = v4l1_compat_sync(arg, inode, file, drv); + err = v4l1_compat_sync(arg, file, drv); break; case VIDIOCGVBIFMT: /* query VBI data capture format */ - err = v4l1_compat_get_vbi_format(arg, inode, file, drv); + err = v4l1_compat_get_vbi_format(arg, file, drv); break; case VIDIOCSVBIFMT: - err = v4l1_compat_set_vbi_format(arg, inode, file, drv); + err = v4l1_compat_set_vbi_format(arg, file, drv); break; default: err = -ENOIOCTLCMD; diff --git a/drivers/media/video/v4l2-int-device.c b/drivers/media/video/v4l2-int-device.c index 0e4549922f26..a935bae538ef 100644 --- a/drivers/media/video/v4l2-int-device.c +++ b/drivers/media/video/v4l2-int-device.c @@ -32,7 +32,7 @@ static DEFINE_MUTEX(mutex); static LIST_HEAD(int_list); -static void v4l2_int_device_try_attach_all(void) +void v4l2_int_device_try_attach_all(void) { struct v4l2_int_device *m, *s; @@ -66,6 +66,7 @@ static void v4l2_int_device_try_attach_all(void) } } } +EXPORT_SYMBOL_GPL(v4l2_int_device_try_attach_all); static int ioctl_sort_cmp(const void *a, const void *b) { @@ -144,6 +145,7 @@ int v4l2_int_ioctl_0(struct v4l2_int_device *d, int cmd) find_ioctl(d->u.slave, cmd, (v4l2_int_ioctl_func *)no_such_ioctl_0))(d); } +EXPORT_SYMBOL_GPL(v4l2_int_ioctl_0); static int no_such_ioctl_1(struct v4l2_int_device *d, void *arg) { @@ -156,5 +158,6 @@ int v4l2_int_ioctl_1(struct v4l2_int_device *d, int cmd, void *arg) find_ioctl(d->u.slave, cmd, (v4l2_int_ioctl_func *)no_such_ioctl_1))(d, arg); } +EXPORT_SYMBOL_GPL(v4l2_int_ioctl_1); MODULE_LICENSE("GPL"); diff --git a/drivers/media/video/v4l2-ioctl.c b/drivers/media/video/v4l2-ioctl.c index 155c9d77a463..710e1a40c422 100644 --- a/drivers/media/video/v4l2-ioctl.c +++ b/drivers/media/video/v4l2-ioctl.c @@ -625,13 +625,13 @@ static int check_fmt(const struct v4l2_ioctl_ops *ops, enum v4l2_buf_type type) return -EINVAL; } -static int __video_do_ioctl(struct inode *inode, struct file *file, +static int __video_do_ioctl(struct file *file, unsigned int cmd, void *arg) { struct video_device *vfd = video_devdata(file); const struct v4l2_ioctl_ops *ops = vfd->ioctl_ops; - void *fh = file->private_data; - int ret = -EINVAL; + void *fh = file->private_data; + int ret = -EINVAL; if ((vfd->debug & V4L2_DEBUG_IOCTL) && !(vfd->debug & V4L2_DEBUG_IOCTL_ARG)) { @@ -675,7 +675,7 @@ static int __video_do_ioctl(struct inode *inode, struct file *file, V4L2 ioctls. ********************************************************/ if (_IOC_TYPE(cmd) == 'v' && _IOC_NR(cmd) < BASE_VIDIOCPRIVATE) - return v4l_compat_translate_ioctl(inode, file, cmd, arg, + return v4l_compat_translate_ioctl(file, cmd, arg, __video_do_ioctl); #endif @@ -1768,7 +1768,7 @@ static int __video_do_ioctl(struct inode *inode, struct file *file, return ret; } -int video_ioctl2(struct inode *inode, struct file *file, +int __video_ioctl2(struct file *file, unsigned int cmd, unsigned long arg) { char sbuf[128]; @@ -1832,7 +1832,7 @@ int video_ioctl2(struct inode *inode, struct file *file, } /* Handles IOCTL */ - err = __video_do_ioctl(inode, file, cmd, parg); + err = __video_do_ioctl(file, cmd, parg); if (err == -ENOIOCTLCMD) err = -EINVAL; if (is_ext_ctrl) { @@ -1860,4 +1860,11 @@ out: kfree(mbuf); return err; } +EXPORT_SYMBOL(__video_ioctl2); + +int video_ioctl2(struct inode *inode, struct file *file, + unsigned int cmd, unsigned long arg) +{ + return __video_ioctl2(file, cmd, arg); +} EXPORT_SYMBOL(video_ioctl2); diff --git a/drivers/media/video/videobuf-dvb.c b/drivers/media/video/videobuf-dvb.c index 917277d36605..0e7dcba8e4ae 100644 --- a/drivers/media/video/videobuf-dvb.c +++ b/drivers/media/video/videobuf-dvb.c @@ -296,29 +296,7 @@ EXPORT_SYMBOL(videobuf_dvb_register_bus); void videobuf_dvb_unregister_bus(struct videobuf_dvb_frontends *f) { - struct list_head *list, *q; - struct videobuf_dvb_frontend *fe; - - mutex_lock(&f->lock); - list_for_each_safe(list, q, &f->felist) { - fe = list_entry(list, struct videobuf_dvb_frontend, felist); - if (fe->dvb.net.dvbdev) { - dvb_net_release(&fe->dvb.net); - fe->dvb.demux.dmx.remove_frontend(&fe->dvb.demux.dmx, - &fe->dvb.fe_mem); - fe->dvb.demux.dmx.remove_frontend(&fe->dvb.demux.dmx, - &fe->dvb.fe_hw); - dvb_dmxdev_release(&fe->dvb.dmxdev); - dvb_dmx_release(&fe->dvb.demux); - dvb_unregister_frontend(fe->dvb.frontend); - } - if (fe->dvb.frontend) - /* always allocated, may have been reset */ - dvb_frontend_detach(fe->dvb.frontend); - list_del(list); - kfree(fe); - } - mutex_unlock(&f->lock); + videobuf_dvb_dealloc_frontends(f); dvb_unregister_adapter(&f->adapter); } @@ -389,3 +367,31 @@ fail_alloc: return fe; } EXPORT_SYMBOL(videobuf_dvb_alloc_frontend); + +void videobuf_dvb_dealloc_frontends(struct videobuf_dvb_frontends *f) +{ + struct list_head *list, *q; + struct videobuf_dvb_frontend *fe; + + mutex_lock(&f->lock); + list_for_each_safe(list, q, &f->felist) { + fe = list_entry(list, struct videobuf_dvb_frontend, felist); + if (fe->dvb.net.dvbdev) { + dvb_net_release(&fe->dvb.net); + fe->dvb.demux.dmx.remove_frontend(&fe->dvb.demux.dmx, + &fe->dvb.fe_mem); + fe->dvb.demux.dmx.remove_frontend(&fe->dvb.demux.dmx, + &fe->dvb.fe_hw); + dvb_dmxdev_release(&fe->dvb.dmxdev); + dvb_dmx_release(&fe->dvb.demux); + dvb_unregister_frontend(fe->dvb.frontend); + } + if (fe->dvb.frontend) + /* always allocated, may have been reset */ + dvb_frontend_detach(fe->dvb.frontend); + list_del(list); /* remove list entry */ + kfree(fe); /* free frontend allocation */ + } + mutex_unlock(&f->lock); +} +EXPORT_SYMBOL(videobuf_dvb_dealloc_frontends); diff --git a/drivers/media/video/vivi.c b/drivers/media/video/vivi.c index 7d7e51def461..e15e48f04be7 100644 --- a/drivers/media/video/vivi.c +++ b/drivers/media/video/vivi.c @@ -1163,11 +1163,11 @@ static int vivi_release(void) if (-1 != dev->vfd->minor) { printk(KERN_INFO "%s: unregistering /dev/video%d\n", - VIVI_MODULE_NAME, dev->vfd->minor); + VIVI_MODULE_NAME, dev->vfd->num); video_unregister_device(dev->vfd); } else { printk(KERN_INFO "%s: releasing /dev/video%d\n", - VIVI_MODULE_NAME, dev->vfd->minor); + VIVI_MODULE_NAME, dev->vfd->num); video_device_release(dev->vfd); } @@ -1307,7 +1307,7 @@ static int __init vivi_init(void) dev->vfd = vfd; printk(KERN_INFO "%s: V4L2 device registered as /dev/video%d\n", - VIVI_MODULE_NAME, vfd->minor); + VIVI_MODULE_NAME, vfd->num); } if (ret < 0) { diff --git a/drivers/media/video/w9968cf.c b/drivers/media/video/w9968cf.c index dcd45dbd82dc..4dfb43bd1846 100644 --- a/drivers/media/video/w9968cf.c +++ b/drivers/media/video/w9968cf.c @@ -2398,7 +2398,7 @@ error: cam->sensor = CC_UNKNOWN; DBG(1, "Image sensor initialization failed for %s (/dev/video%d). " "Try to detach and attach this device again", - symbolic(camlist, cam->id), cam->v4ldev->minor) + symbolic(camlist, cam->id), cam->v4ldev->num) return err; } @@ -2644,7 +2644,7 @@ static void w9968cf_release_resources(struct w9968cf_device* cam) { mutex_lock(&w9968cf_devlist_mutex); - DBG(2, "V4L device deregistered: /dev/video%d", cam->v4ldev->minor) + DBG(2, "V4L device deregistered: /dev/video%d", cam->v4ldev->num) video_unregister_device(cam->v4ldev); list_del(&cam->v4llist); @@ -2679,7 +2679,7 @@ static int w9968cf_open(struct inode* inode, struct file* filp) DBG(2, "No supported image sensor has been detected by the " "'ovcamchip' module for the %s (/dev/video%d). Make " "sure it is loaded *before* (re)connecting the camera.", - symbolic(camlist, cam->id), cam->v4ldev->minor) + symbolic(camlist, cam->id), cam->v4ldev->num) mutex_unlock(&cam->dev_mutex); up_read(&w9968cf_disconnect); return -ENODEV; @@ -2687,7 +2687,7 @@ static int w9968cf_open(struct inode* inode, struct file* filp) if (cam->users) { DBG(2, "%s (/dev/video%d) has been already occupied by '%s'", - symbolic(camlist, cam->id),cam->v4ldev->minor,cam->command) + symbolic(camlist, cam->id), cam->v4ldev->num, cam->command) if ((filp->f_flags & O_NONBLOCK)||(filp->f_flags & O_NDELAY)) { mutex_unlock(&cam->dev_mutex); up_read(&w9968cf_disconnect); @@ -2709,7 +2709,7 @@ static int w9968cf_open(struct inode* inode, struct file* filp) } DBG(5, "Opening '%s', /dev/video%d ...", - symbolic(camlist, cam->id), cam->v4ldev->minor) + symbolic(camlist, cam->id), cam->v4ldev->num) cam->streaming = 0; cam->misconfigured = 0; @@ -2947,7 +2947,7 @@ static int w9968cf_v4l_ioctl(struct inode* inode, struct file* filp, .minheight = cam->minheight, }; sprintf(cap.name, "W996[87]CF USB Camera #%d", - cam->v4ldev->minor); + cam->v4ldev->num); cap.maxwidth = (cam->upscaling && w9968cf_vpp) ? max((u16)W9968CF_MAX_WIDTH, cam->maxwidth) : cam->maxwidth; @@ -3567,7 +3567,7 @@ w9968cf_usb_probe(struct usb_interface* intf, const struct usb_device_id* id) goto fail; } - DBG(2, "V4L device registered as /dev/video%d", cam->v4ldev->minor) + DBG(2, "V4L device registered as /dev/video%d", cam->v4ldev->num) /* Set some basic constants */ w9968cf_configure_camera(cam, udev, mod_id, dev_nr); @@ -3618,7 +3618,7 @@ static void w9968cf_usb_disconnect(struct usb_interface* intf) DBG(2, "The device is open (/dev/video%d)! " "Process name: %s. Deregistration and memory " "deallocation are deferred on close.", - cam->v4ldev->minor, cam->command) + cam->v4ldev->num, cam->command) cam->misconfigured = 1; w9968cf_stop_transfer(cam); wake_up_interruptible(&cam->wait_queue); diff --git a/drivers/media/video/zc0301/zc0301_core.c b/drivers/media/video/zc0301/zc0301_core.c index 6a0902bcba6b..9fc581707638 100644 --- a/drivers/media/video/zc0301/zc0301_core.c +++ b/drivers/media/video/zc0301/zc0301_core.c @@ -539,7 +539,7 @@ static int zc0301_stream_interrupt(struct zc0301_device* cam) cam->state |= DEV_MISCONFIGURED; DBG(1, "URB timeout reached. The camera is misconfigured. To " "use it, close and open /dev/video%d again.", - cam->v4ldev->minor); + cam->v4ldev->num); return -EIO; } @@ -640,7 +640,7 @@ static void zc0301_release_resources(struct kref *kref) { struct zc0301_device *cam = container_of(kref, struct zc0301_device, kref); - DBG(2, "V4L2 device /dev/video%d deregistered", cam->v4ldev->minor); + DBG(2, "V4L2 device /dev/video%d deregistered", cam->v4ldev->num); video_set_drvdata(cam->v4ldev, NULL); video_unregister_device(cam->v4ldev); usb_put_dev(cam->usbdev); @@ -679,7 +679,7 @@ static int zc0301_open(struct inode* inode, struct file* filp) } if (cam->users) { - DBG(2, "Device /dev/video%d is busy...", cam->v4ldev->minor); + DBG(2, "Device /dev/video%d is busy...", cam->v4ldev->num); DBG(3, "Simultaneous opens are not supported"); if ((filp->f_flags & O_NONBLOCK) || (filp->f_flags & O_NDELAY)) { @@ -722,7 +722,7 @@ static int zc0301_open(struct inode* inode, struct file* filp) cam->frame_count = 0; zc0301_empty_framequeues(cam); - DBG(3, "Video device /dev/video%d is open", cam->v4ldev->minor); + DBG(3, "Video device /dev/video%d is open", cam->v4ldev->num); out: mutex_unlock(&cam->open_mutex); @@ -746,7 +746,7 @@ static int zc0301_release(struct inode* inode, struct file* filp) cam->users--; wake_up_interruptible_nr(&cam->wait_open, 1); - DBG(3, "Video device /dev/video%d closed", cam->v4ldev->minor); + DBG(3, "Video device /dev/video%d closed", cam->v4ldev->num); kref_put(&cam->kref, zc0301_release_resources); @@ -1275,7 +1275,7 @@ zc0301_vidioc_s_crop(struct zc0301_device* cam, void __user * arg) cam->state |= DEV_MISCONFIGURED; DBG(1, "VIDIOC_S_CROP failed because of hardware problems. To " "use the camera, close and open /dev/video%d again.", - cam->v4ldev->minor); + cam->v4ldev->num); return -EIO; } @@ -1288,7 +1288,7 @@ zc0301_vidioc_s_crop(struct zc0301_device* cam, void __user * arg) cam->state |= DEV_MISCONFIGURED; DBG(1, "VIDIOC_S_CROP failed because of not enough memory. To " "use the camera, close and open /dev/video%d again.", - cam->v4ldev->minor); + cam->v4ldev->num); return -ENOMEM; } @@ -1470,7 +1470,7 @@ zc0301_vidioc_try_s_fmt(struct zc0301_device* cam, unsigned int cmd, cam->state |= DEV_MISCONFIGURED; DBG(1, "VIDIOC_S_FMT failed because of hardware problems. To " "use the camera, close and open /dev/video%d again.", - cam->v4ldev->minor); + cam->v4ldev->num); return -EIO; } @@ -1482,7 +1482,7 @@ zc0301_vidioc_try_s_fmt(struct zc0301_device* cam, unsigned int cmd, cam->state |= DEV_MISCONFIGURED; DBG(1, "VIDIOC_S_FMT failed because of not enough memory. To " "use the camera, close and open /dev/video%d again.", - cam->v4ldev->minor); + cam->v4ldev->num); return -ENOMEM; } @@ -1529,7 +1529,7 @@ zc0301_vidioc_s_jpegcomp(struct zc0301_device* cam, void __user * arg) cam->state |= DEV_MISCONFIGURED; DBG(1, "VIDIOC_S_JPEGCOMP failed because of hardware " "problems. To use the camera, close and open " - "/dev/video%d again.", cam->v4ldev->minor); + "/dev/video%d again.", cam->v4ldev->num); return -EIO; } @@ -2005,7 +2005,7 @@ zc0301_usb_probe(struct usb_interface* intf, const struct usb_device_id* id) goto fail; } - DBG(2, "V4L2 device registered as /dev/video%d", cam->v4ldev->minor); + DBG(2, "V4L2 device registered as /dev/video%d", cam->v4ldev->num); cam->module_param.force_munmap = force_munmap[dev_nr]; cam->module_param.frame_timeout = frame_timeout[dev_nr]; @@ -2044,7 +2044,7 @@ static void zc0301_usb_disconnect(struct usb_interface* intf) if (cam->users) { DBG(2, "Device /dev/video%d is open! Deregistration and " "memory deallocation are deferred.", - cam->v4ldev->minor); + cam->v4ldev->num); cam->state |= DEV_MISCONFIGURED; zc0301_stop_transfer(cam); cam->state |= DEV_DISCONNECTED; diff --git a/drivers/media/video/zr364xx.c b/drivers/media/video/zr364xx.c index 7cdac99deea6..a1d81ed44c7c 100644 --- a/drivers/media/video/zr364xx.c +++ b/drivers/media/video/zr364xx.c @@ -885,7 +885,7 @@ static int zr364xx_probe(struct usb_interface *intf, usb_set_intfdata(intf, cam); dev_info(&udev->dev, DRIVER_DESC " controlling video device %d\n", - cam->vdev->minor); + cam->vdev->num); return 0; } diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index 68e237b830ad..0acefe8aff87 100644 --- a/drivers/mfd/Makefile +++ b/drivers/mfd/Makefile @@ -17,7 +17,7 @@ wm8350-objs := wm8350-core.o wm8350-regmap.o wm8350-gpio.o obj-$(CONFIG_MFD_WM8350) += wm8350.o obj-$(CONFIG_MFD_WM8350_I2C) += wm8350-i2c.o -obj-$(CONFIG_TWL4030_CORE) += twl4030-core.o +obj-$(CONFIG_TWL4030_CORE) += twl4030-core.o twl4030-irq.o obj-$(CONFIG_MFD_CORE) += mfd-core.o diff --git a/drivers/mfd/sm501.c b/drivers/mfd/sm501.c index 220e4371266b..170f9d47c2f9 100644 --- a/drivers/mfd/sm501.c +++ b/drivers/mfd/sm501.c @@ -1374,31 +1374,31 @@ static int sm501_init_dev(struct sm501_devdata *sm) static int sm501_plat_probe(struct platform_device *dev) { struct sm501_devdata *sm; - int err; + int ret; sm = kzalloc(sizeof(struct sm501_devdata), GFP_KERNEL); if (sm == NULL) { dev_err(&dev->dev, "no memory for device data\n"); - err = -ENOMEM; + ret = -ENOMEM; goto err1; } sm->dev = &dev->dev; sm->pdev_id = dev->id; - sm->irq = platform_get_irq(dev, 0); - sm->io_res = platform_get_resource(dev, IORESOURCE_MEM, 1); - sm->mem_res = platform_get_resource(dev, IORESOURCE_MEM, 0); sm->platdata = dev->dev.platform_data; - if (sm->irq < 0) { + ret = platform_get_irq(dev, 0); + if (ret < 0) { dev_err(&dev->dev, "failed to get irq resource\n"); - err = sm->irq; goto err_res; } + sm->irq = ret; + sm->io_res = platform_get_resource(dev, IORESOURCE_MEM, 1); + sm->mem_res = platform_get_resource(dev, IORESOURCE_MEM, 0); if (sm->io_res == NULL || sm->mem_res == NULL) { dev_err(&dev->dev, "failed to get IO resource\n"); - err = -ENOENT; + ret = -ENOENT; goto err_res; } @@ -1407,7 +1407,7 @@ static int sm501_plat_probe(struct platform_device *dev) if (sm->regs_claim == NULL) { dev_err(&dev->dev, "cannot claim registers\n"); - err= -EBUSY; + ret = -EBUSY; goto err_res; } @@ -1418,7 +1418,7 @@ static int sm501_plat_probe(struct platform_device *dev) if (sm->regs == NULL) { dev_err(&dev->dev, "cannot remap registers\n"); - err = -EIO; + ret = -EIO; goto err_claim; } @@ -1430,7 +1430,7 @@ static int sm501_plat_probe(struct platform_device *dev) err_res: kfree(sm); err1: - return err; + return ret; } @@ -1625,8 +1625,7 @@ static int sm501_pci_probe(struct pci_dev *dev, goto err3; } - sm->regs = ioremap(pci_resource_start(dev, 1), - pci_resource_len(dev, 1)); + sm->regs = pci_ioremap_bar(dev, 1); if (sm->regs == NULL) { dev_err(&dev->dev, "cannot remap registers\n"); diff --git a/drivers/mfd/twl4030-core.c b/drivers/mfd/twl4030-core.c index fd9a0160202c..dd843c4fbcc7 100644 --- a/drivers/mfd/twl4030-core.c +++ b/drivers/mfd/twl4030-core.c @@ -27,15 +27,11 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ -#include <linux/kernel_stat.h> #include <linux/init.h> #include <linux/mutex.h> -#include <linux/interrupt.h> -#include <linux/irq.h> -#include <linux/random.h> -#include <linux/kthread.h> #include <linux/platform_device.h> #include <linux/clk.h> +#include <linux/err.h> #include <linux/i2c.h> #include <linux/i2c/twl4030.h> @@ -93,26 +89,6 @@ #define twl_has_usb() false #endif -static inline void activate_irq(int irq) -{ -#ifdef CONFIG_ARM - /* ARM requires an extra step to clear IRQ_NOREQUEST, which it - * sets on behalf of every irq_chip. Also sets IRQ_NOPROBE. - */ - set_irq_flags(irq, IRQF_VALID); -#else - /* same effect on other architectures */ - set_irq_noprobe(irq); -#endif -} - -/* Primary Interrupt Handler on TWL4030 Registers */ - -/* Register Definitions */ - -#define REG_PIH_ISR_P1 (0x1) -#define REG_PIH_ISR_P2 (0x2) -#define REG_PIH_SIR (0x3) /* Triton Core internal information (BEGIN) */ @@ -175,138 +151,6 @@ static inline void activate_irq(int irq) /*----------------------------------------------------------------------*/ -/** - * struct twl4030_mod_iregs - TWL module IMR/ISR regs to mask/clear at init - * @mod_no: TWL4030 module number (e.g., TWL4030_MODULE_GPIO) - * @sih_ctrl: address of module SIH_CTRL register - * @reg_cnt: number of IMR/ISR regs - * @imrs: pointer to array of TWL module interrupt mask register indices - * @isrs: pointer to array of TWL module interrupt status register indices - * - * Ties together TWL4030 modules and lists of IMR/ISR registers to mask/clear - * during twl_init_irq(). - */ -struct twl4030_mod_iregs { - const u8 mod_no; - const u8 sih_ctrl; - const u8 reg_cnt; - const u8 *imrs; - const u8 *isrs; -}; - -/* TWL4030 INT module interrupt mask registers */ -static const u8 __initconst twl4030_int_imr_regs[] = { - TWL4030_INT_PWR_IMR1, - TWL4030_INT_PWR_IMR2, -}; - -/* TWL4030 INT module interrupt status registers */ -static const u8 __initconst twl4030_int_isr_regs[] = { - TWL4030_INT_PWR_ISR1, - TWL4030_INT_PWR_ISR2, -}; - -/* TWL4030 INTERRUPTS module interrupt mask registers */ -static const u8 __initconst twl4030_interrupts_imr_regs[] = { - TWL4030_INTERRUPTS_BCIIMR1A, - TWL4030_INTERRUPTS_BCIIMR1B, - TWL4030_INTERRUPTS_BCIIMR2A, - TWL4030_INTERRUPTS_BCIIMR2B, -}; - -/* TWL4030 INTERRUPTS module interrupt status registers */ -static const u8 __initconst twl4030_interrupts_isr_regs[] = { - TWL4030_INTERRUPTS_BCIISR1A, - TWL4030_INTERRUPTS_BCIISR1B, - TWL4030_INTERRUPTS_BCIISR2A, - TWL4030_INTERRUPTS_BCIISR2B, -}; - -/* TWL4030 MADC module interrupt mask registers */ -static const u8 __initconst twl4030_madc_imr_regs[] = { - TWL4030_MADC_IMR1, - TWL4030_MADC_IMR2, -}; - -/* TWL4030 MADC module interrupt status registers */ -static const u8 __initconst twl4030_madc_isr_regs[] = { - TWL4030_MADC_ISR1, - TWL4030_MADC_ISR2, -}; - -/* TWL4030 keypad module interrupt mask registers */ -static const u8 __initconst twl4030_keypad_imr_regs[] = { - TWL4030_KEYPAD_KEYP_IMR1, - TWL4030_KEYPAD_KEYP_IMR2, -}; - -/* TWL4030 keypad module interrupt status registers */ -static const u8 __initconst twl4030_keypad_isr_regs[] = { - TWL4030_KEYPAD_KEYP_ISR1, - TWL4030_KEYPAD_KEYP_ISR2, -}; - -/* TWL4030 GPIO module interrupt mask registers */ -static const u8 __initconst twl4030_gpio_imr_regs[] = { - REG_GPIO_IMR1A, - REG_GPIO_IMR1B, - REG_GPIO_IMR2A, - REG_GPIO_IMR2B, - REG_GPIO_IMR3A, - REG_GPIO_IMR3B, -}; - -/* TWL4030 GPIO module interrupt status registers */ -static const u8 __initconst twl4030_gpio_isr_regs[] = { - REG_GPIO_ISR1A, - REG_GPIO_ISR1B, - REG_GPIO_ISR2A, - REG_GPIO_ISR2B, - REG_GPIO_ISR3A, - REG_GPIO_ISR3B, -}; - -/* TWL4030 modules that have IMR/ISR registers that must be masked/cleared */ -static const struct twl4030_mod_iregs __initconst twl4030_mod_regs[] = { - { - .mod_no = TWL4030_MODULE_INT, - .sih_ctrl = TWL4030_INT_PWR_SIH_CTRL, - .reg_cnt = ARRAY_SIZE(twl4030_int_imr_regs), - .imrs = twl4030_int_imr_regs, - .isrs = twl4030_int_isr_regs, - }, - { - .mod_no = TWL4030_MODULE_INTERRUPTS, - .sih_ctrl = TWL4030_INTERRUPTS_BCISIHCTRL, - .reg_cnt = ARRAY_SIZE(twl4030_interrupts_imr_regs), - .imrs = twl4030_interrupts_imr_regs, - .isrs = twl4030_interrupts_isr_regs, - }, - { - .mod_no = TWL4030_MODULE_MADC, - .sih_ctrl = TWL4030_MADC_SIH_CTRL, - .reg_cnt = ARRAY_SIZE(twl4030_madc_imr_regs), - .imrs = twl4030_madc_imr_regs, - .isrs = twl4030_madc_isr_regs, - }, - { - .mod_no = TWL4030_MODULE_KEYPAD, - .sih_ctrl = TWL4030_KEYPAD_KEYP_SIH_CTRL, - .reg_cnt = ARRAY_SIZE(twl4030_keypad_imr_regs), - .imrs = twl4030_keypad_imr_regs, - .isrs = twl4030_keypad_isr_regs, - }, - { - .mod_no = TWL4030_MODULE_GPIO, - .sih_ctrl = REG_GPIO_SIH_CTRL, - .reg_cnt = ARRAY_SIZE(twl4030_gpio_imr_regs), - .imrs = twl4030_gpio_imr_regs, - .isrs = twl4030_gpio_isr_regs, - }, -}; - -/*----------------------------------------------------------------*/ - /* is driver active, bound to a chip? */ static bool inuse; @@ -367,33 +211,6 @@ static struct twl4030mapping twl4030_map[TWL4030_MODULE_LAST + 1] = { /*----------------------------------------------------------------------*/ -/* - * TWL4030 doesn't have PIH mask, hence dummy function for mask - * and unmask of the (eight) interrupts reported at that level ... - * masking is only available from SIH (secondary) modules. - */ - -static void twl4030_i2c_ackirq(unsigned int irq) -{ -} - -static void twl4030_i2c_disableint(unsigned int irq) -{ -} - -static void twl4030_i2c_enableint(unsigned int irq) -{ -} - -static struct irq_chip twl4030_irq_chip = { - .name = "twl4030", - .ack = twl4030_i2c_ackirq, - .mask = twl4030_i2c_disableint, - .unmask = twl4030_i2c_enableint, -}; - -/*----------------------------------------------------------------------*/ - /* Exported Functions */ /** @@ -535,108 +352,11 @@ EXPORT_SYMBOL(twl4030_i2c_read_u8); /*----------------------------------------------------------------------*/ -static unsigned twl4030_irq_base; - -static struct completion irq_event; - -/* - * This thread processes interrupts reported by the Primary Interrupt Handler. - */ -static int twl4030_irq_thread(void *data) -{ - long irq = (long)data; - irq_desc_t *desc = irq_desc + irq; - static unsigned i2c_errors; - const static unsigned max_i2c_errors = 100; - - current->flags |= PF_NOFREEZE; - - while (!kthread_should_stop()) { - int ret; - int module_irq; - u8 pih_isr; - - /* Wait for IRQ, then read PIH irq status (also blocking) */ - wait_for_completion_interruptible(&irq_event); - - ret = twl4030_i2c_read_u8(TWL4030_MODULE_PIH, &pih_isr, - REG_PIH_ISR_P1); - if (ret) { - pr_warning("%s: I2C error %d reading PIH ISR\n", - DRIVER_NAME, ret); - if (++i2c_errors >= max_i2c_errors) { - printk(KERN_ERR "Maximum I2C error count" - " exceeded. Terminating %s.\n", - __func__); - break; - } - complete(&irq_event); - continue; - } - - /* these handlers deal with the relevant SIH irq status */ - local_irq_disable(); - for (module_irq = twl4030_irq_base; - pih_isr; - pih_isr >>= 1, module_irq++) { - if (pih_isr & 0x1) { - irq_desc_t *d = irq_desc + module_irq; - - d->handle_irq(module_irq, d); - } - } - local_irq_enable(); - - desc->chip->unmask(irq); - } - - return 0; -} - /* - * do_twl4030_irq() is the desc->handle method for the twl4030 interrupt. - * This is a chained interrupt, so there is no desc->action method for it. - * Now we need to query the interrupt controller in the twl4030 to determine - * which module is generating the interrupt request. However, we can't do i2c - * transactions in interrupt context, so we must defer that work to a kernel - * thread. All we do here is acknowledge and mask the interrupt and wakeup - * the kernel thread. + * NOTE: We know the first 8 IRQs after pdata->base_irq are + * for the PIH, and the next are for the PWR_INT SIH, since + * that's how twl_init_irq() sets things up. */ -static void do_twl4030_irq(unsigned int irq, irq_desc_t *desc) -{ - const unsigned int cpu = smp_processor_id(); - - /* - * Earlier this was desc->triggered = 1; - */ - desc->status |= IRQ_LEVEL; - - /* - * Acknowledge, clear _AND_ disable the interrupt. - */ - desc->chip->ack(irq); - - if (!desc->depth) { - kstat_cpu(cpu).irqs[irq]++; - - complete(&irq_event); - } -} - -static struct task_struct * __init start_twl4030_irq_thread(long irq) -{ - struct task_struct *thread; - - init_completion(&irq_event); - thread = kthread_run(twl4030_irq_thread, (void *)irq, "twl4030-irq"); - if (!thread) - pr_err("%s: could not create twl4030 irq %ld thread!\n", - DRIVER_NAME, irq); - - return thread; -} - -/*----------------------------------------------------------------------*/ static int add_children(struct twl4030_platform_data *pdata) { @@ -668,7 +388,7 @@ static int add_children(struct twl4030_platform_data *pdata) if (status == 0) { struct resource r = { - .start = TWL4030_PWRIRQ_CHG_PRES, + .start = pdata->irq_base + 8 + 1, .flags = IORESOURCE_IRQ, }; @@ -817,8 +537,7 @@ static int add_children(struct twl4030_platform_data *pdata) /* RTC module IRQ */ if (status == 0) { struct resource r = { - /* REVISIT don't hard-wire this stuff */ - .start = TWL4030_PWRIRQ_RTC, + .start = pdata->irq_base + 8 + 3, .flags = IORESOURCE_IRQ, }; @@ -863,7 +582,7 @@ static int add_children(struct twl4030_platform_data *pdata) if (status == 0) { struct resource r = { - .start = TWL4030_PWRIRQ_USB_PRES, + .start = pdata->irq_base + 8 + 2, .flags = IORESOURCE_IRQ, }; @@ -965,123 +684,17 @@ static void __init clocks_init(void) /*----------------------------------------------------------------------*/ -/** - * twl4030_i2c_clear_isr - clear TWL4030 SIH ISR regs via read + write - * @mod_no: TWL4030 module number - * @reg: register index to clear - * @cor: value of the <module>_SIH_CTRL.COR bit (1 or 0) - * - * Either reads (cor == 1) or writes (cor == 0) to a TWL4030 interrupt - * status register to ensure that any prior interrupts are cleared. - * Returns the status from the I2C read operation. - */ -static int __init twl4030_i2c_clear_isr(u8 mod_no, u8 reg, u8 cor) -{ - u8 tmp; - - return (cor) ? twl4030_i2c_read_u8(mod_no, &tmp, reg) : - twl4030_i2c_write_u8(mod_no, 0xff, reg); -} - -/** - * twl4030_read_cor_bit - are TWL module ISRs cleared by reads or writes? - * @mod_no: TWL4030 module number - * @reg: register index to clear - * - * Returns 1 if the TWL4030 SIH interrupt status registers (ISRs) for - * the specified TWL module are cleared by reads, or 0 if cleared by - * writes. - */ -static int twl4030_read_cor_bit(u8 mod_no, u8 reg) -{ - u8 tmp = 0; - - WARN_ON(twl4030_i2c_read_u8(mod_no, &tmp, reg) < 0); - - tmp &= TWL4030_SIH_CTRL_COR_MASK; - tmp >>= __ffs(TWL4030_SIH_CTRL_COR_MASK); - - return tmp; -} - -/** - * twl4030_mask_clear_intrs - mask and clear all TWL4030 interrupts - * @t: pointer to twl4030_mod_iregs array - * @t_sz: ARRAY_SIZE(t) (starting at 1) - * - * Mask all TWL4030 interrupt mask registers (IMRs) and clear all - * interrupt status registers (ISRs). No return value, but will WARN if - * any I2C operations fail. - */ -static void __init twl4030_mask_clear_intrs(const struct twl4030_mod_iregs *t, - const u8 t_sz) -{ - int i, j; - - /* - * N.B. - further efficiency is possible here. Eight I2C - * operations on BCI and GPIO modules are avoidable if I2C - * burst read/write transactions were implemented. Would - * probably save about 1ms of boot time and a small amount of - * power. - */ - for (i = 0; i < t_sz; i++) { - const struct twl4030_mod_iregs tmr = t[i]; - int cor; - - /* Are ISRs cleared by reads or writes? */ - cor = twl4030_read_cor_bit(tmr.mod_no, tmr.sih_ctrl); - - for (j = 0; j < tmr.reg_cnt; j++) { - - /* Mask interrupts at the TWL4030 */ - WARN_ON(twl4030_i2c_write_u8(tmr.mod_no, 0xff, - tmr.imrs[j]) < 0); - - /* Clear TWL4030 ISRs */ - WARN_ON(twl4030_i2c_clear_isr(tmr.mod_no, - tmr.isrs[j], cor) < 0); - } - } -} - - -static void twl_init_irq(int irq_num, unsigned irq_base, unsigned irq_end) -{ - int i; - - /* - * Mask and clear all TWL4030 interrupts since initially we do - * not have any TWL4030 module interrupt handlers present - */ - twl4030_mask_clear_intrs(twl4030_mod_regs, - ARRAY_SIZE(twl4030_mod_regs)); - - twl4030_irq_base = irq_base; - - /* install an irq handler for each of the PIH modules */ - for (i = irq_base; i < irq_end; i++) { - set_irq_chip_and_handler(i, &twl4030_irq_chip, - handle_simple_irq); - activate_irq(i); - } - - /* install an irq handler to demultiplex the TWL4030 interrupt */ - set_irq_data(irq_num, start_twl4030_irq_thread(irq_num)); - set_irq_chained_handler(irq_num, do_twl4030_irq); -} - -/*----------------------------------------------------------------------*/ +int twl_init_irq(int irq_num, unsigned irq_base, unsigned irq_end); +int twl_exit_irq(void); static int twl4030_remove(struct i2c_client *client) { unsigned i; + int status; - /* FIXME undo twl_init_irq() */ - if (twl4030_irq_base) { - dev_err(&client->dev, "can't yet clean up IRQs?\n"); - return -ENOSYS; - } + status = twl_exit_irq(); + if (status < 0) + return status; for (i = 0; i < TWL4030_NUM_SLAVES; i++) { struct twl4030_client *twl = &twl4030_modules[i]; @@ -1112,7 +725,7 @@ twl4030_probe(struct i2c_client *client, const struct i2c_device_id *id) return -EIO; } - if (inuse || twl4030_irq_base) { + if (inuse) { dev_dbg(&client->dev, "driver is already in use\n"); return -EBUSY; } @@ -1146,9 +759,9 @@ twl4030_probe(struct i2c_client *client, const struct i2c_device_id *id) if (client->irq && pdata->irq_base && pdata->irq_end > pdata->irq_base) { - twl_init_irq(client->irq, pdata->irq_base, pdata->irq_end); - dev_info(&client->dev, "IRQ %d chains IRQs %d..%d\n", - client->irq, pdata->irq_base, pdata->irq_end - 1); + status = twl_init_irq(client->irq, pdata->irq_base, pdata->irq_end); + if (status < 0) + goto fail; } status = add_children(pdata); diff --git a/drivers/mfd/twl4030-irq.c b/drivers/mfd/twl4030-irq.c new file mode 100644 index 000000000000..fae868a8d499 --- /dev/null +++ b/drivers/mfd/twl4030-irq.c @@ -0,0 +1,743 @@ +/* + * twl4030-irq.c - TWL4030/TPS659x0 irq support + * + * Copyright (C) 2005-2006 Texas Instruments, Inc. + * + * Modifications to defer interrupt handling to a kernel thread: + * Copyright (C) 2006 MontaVista Software, Inc. + * + * Based on tlv320aic23.c: + * Copyright (c) by Kai Svahn <kai.svahn@nokia.com> + * + * Code cleanup and modifications to IRQ handler. + * by syed khasim <x0khasim@ti.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/kthread.h> + +#include <linux/i2c/twl4030.h> + + +/* + * TWL4030 IRQ handling has two stages in hardware, and thus in software. + * The Primary Interrupt Handler (PIH) stage exposes status bits saying + * which Secondary Interrupt Handler (SIH) stage is raising an interrupt. + * SIH modules are more traditional IRQ components, which support per-IRQ + * enable/disable and trigger controls; they do most of the work. + * + * These chips are designed to support IRQ handling from two different + * I2C masters. Each has a dedicated IRQ line, and dedicated IRQ status + * and mask registers in the PIH and SIH modules. + * + * We set up IRQs starting at a platform-specified base, always starting + * with PIH and the SIH for PWR_INT and then usually adding GPIO: + * base + 0 .. base + 7 PIH + * base + 8 .. base + 15 SIH for PWR_INT + * base + 16 .. base + 33 SIH for GPIO + */ + +/* PIH register offsets */ +#define REG_PIH_ISR_P1 0x01 +#define REG_PIH_ISR_P2 0x02 +#define REG_PIH_SIR 0x03 /* for testing */ + + +/* Linux could (eventually) use either IRQ line */ +static int irq_line; + +struct sih { + char name[8]; + u8 module; /* module id */ + u8 control_offset; /* for SIH_CTRL */ + bool set_cor; + + u8 bits; /* valid in isr/imr */ + u8 bytes_ixr; /* bytelen of ISR/IMR/SIR */ + + u8 edr_offset; + u8 bytes_edr; /* bytelen of EDR */ + + /* SIR ignored -- set interrupt, for testing only */ + struct irq_data { + u8 isr_offset; + u8 imr_offset; + } mask[2]; + /* + 2 bytes padding */ +}; + +#define SIH_INITIALIZER(modname, nbits) \ + .module = TWL4030_MODULE_ ## modname, \ + .control_offset = TWL4030_ ## modname ## _SIH_CTRL, \ + .bits = nbits, \ + .bytes_ixr = DIV_ROUND_UP(nbits, 8), \ + .edr_offset = TWL4030_ ## modname ## _EDR, \ + .bytes_edr = DIV_ROUND_UP((2*(nbits)), 8), \ + .mask = { { \ + .isr_offset = TWL4030_ ## modname ## _ISR1, \ + .imr_offset = TWL4030_ ## modname ## _IMR1, \ + }, \ + { \ + .isr_offset = TWL4030_ ## modname ## _ISR2, \ + .imr_offset = TWL4030_ ## modname ## _IMR2, \ + }, }, + +/* register naming policies are inconsistent ... */ +#define TWL4030_INT_PWR_EDR TWL4030_INT_PWR_EDR1 +#define TWL4030_MODULE_KEYPAD_KEYP TWL4030_MODULE_KEYPAD +#define TWL4030_MODULE_INT_PWR TWL4030_MODULE_INT + + +/* Order in this table matches order in PIH_ISR. That is, + * BIT(n) in PIH_ISR is sih_modules[n]. + */ +static const struct sih sih_modules[6] = { + [0] = { + .name = "gpio", + .module = TWL4030_MODULE_GPIO, + .control_offset = REG_GPIO_SIH_CTRL, + .set_cor = true, + .bits = TWL4030_GPIO_MAX, + .bytes_ixr = 3, + /* Note: *all* of these IRQs default to no-trigger */ + .edr_offset = REG_GPIO_EDR1, + .bytes_edr = 5, + .mask = { { + .isr_offset = REG_GPIO_ISR1A, + .imr_offset = REG_GPIO_IMR1A, + }, { + .isr_offset = REG_GPIO_ISR1B, + .imr_offset = REG_GPIO_IMR1B, + }, }, + }, + [1] = { + .name = "keypad", + .set_cor = true, + SIH_INITIALIZER(KEYPAD_KEYP, 4) + }, + [2] = { + .name = "bci", + .module = TWL4030_MODULE_INTERRUPTS, + .control_offset = TWL4030_INTERRUPTS_BCISIHCTRL, + .bits = 12, + .bytes_ixr = 2, + .edr_offset = TWL4030_INTERRUPTS_BCIEDR1, + /* Note: most of these IRQs default to no-trigger */ + .bytes_edr = 3, + .mask = { { + .isr_offset = TWL4030_INTERRUPTS_BCIISR1A, + .imr_offset = TWL4030_INTERRUPTS_BCIIMR1A, + }, { + .isr_offset = TWL4030_INTERRUPTS_BCIISR1B, + .imr_offset = TWL4030_INTERRUPTS_BCIIMR1B, + }, }, + }, + [3] = { + .name = "madc", + SIH_INITIALIZER(MADC, 4) + }, + [4] = { + /* USB doesn't use the same SIH organization */ + .name = "usb", + }, + [5] = { + .name = "power", + .set_cor = true, + SIH_INITIALIZER(INT_PWR, 8) + }, + /* there are no SIH modules #6 or #7 ... */ +}; + +#undef TWL4030_MODULE_KEYPAD_KEYP +#undef TWL4030_MODULE_INT_PWR +#undef TWL4030_INT_PWR_EDR + +/*----------------------------------------------------------------------*/ + +static unsigned twl4030_irq_base; + +static struct completion irq_event; + +/* + * This thread processes interrupts reported by the Primary Interrupt Handler. + */ +static int twl4030_irq_thread(void *data) +{ + long irq = (long)data; + irq_desc_t *desc = irq_desc + irq; + static unsigned i2c_errors; + const static unsigned max_i2c_errors = 100; + + current->flags |= PF_NOFREEZE; + + while (!kthread_should_stop()) { + int ret; + int module_irq; + u8 pih_isr; + + /* Wait for IRQ, then read PIH irq status (also blocking) */ + wait_for_completion_interruptible(&irq_event); + + ret = twl4030_i2c_read_u8(TWL4030_MODULE_PIH, &pih_isr, + REG_PIH_ISR_P1); + if (ret) { + pr_warning("twl4030: I2C error %d reading PIH ISR\n", + ret); + if (++i2c_errors >= max_i2c_errors) { + printk(KERN_ERR "Maximum I2C error count" + " exceeded. Terminating %s.\n", + __func__); + break; + } + complete(&irq_event); + continue; + } + + /* these handlers deal with the relevant SIH irq status */ + local_irq_disable(); + for (module_irq = twl4030_irq_base; + pih_isr; + pih_isr >>= 1, module_irq++) { + if (pih_isr & 0x1) { + irq_desc_t *d = irq_desc + module_irq; + + /* These can't be masked ... always warn + * if we get any surprises. + */ + if (d->status & IRQ_DISABLED) + note_interrupt(module_irq, d, + IRQ_NONE); + else + d->handle_irq(module_irq, d); + } + } + local_irq_enable(); + + desc->chip->unmask(irq); + } + + return 0; +} + +/* + * handle_twl4030_pih() is the desc->handle method for the twl4030 interrupt. + * This is a chained interrupt, so there is no desc->action method for it. + * Now we need to query the interrupt controller in the twl4030 to determine + * which module is generating the interrupt request. However, we can't do i2c + * transactions in interrupt context, so we must defer that work to a kernel + * thread. All we do here is acknowledge and mask the interrupt and wakeup + * the kernel thread. + */ +static void handle_twl4030_pih(unsigned int irq, irq_desc_t *desc) +{ + /* Acknowledge, clear *AND* mask the interrupt... */ + desc->chip->ack(irq); + complete(&irq_event); +} + +static struct task_struct *start_twl4030_irq_thread(long irq) +{ + struct task_struct *thread; + + init_completion(&irq_event); + thread = kthread_run(twl4030_irq_thread, (void *)irq, "twl4030-irq"); + if (!thread) + pr_err("twl4030: could not create irq %ld thread!\n", irq); + + return thread; +} + +/*----------------------------------------------------------------------*/ + +/* + * twl4030_init_sih_modules() ... start from a known state where no + * IRQs will be coming in, and where we can quickly enable them then + * handle them as they arrive. Mask all IRQs: maybe init SIH_CTRL. + * + * NOTE: we don't touch EDR registers here; they stay with hardware + * defaults or whatever the last value was. Note that when both EDR + * bits for an IRQ are clear, that's as if its IMR bit is set... + */ +static int twl4030_init_sih_modules(unsigned line) +{ + const struct sih *sih; + u8 buf[4]; + int i; + int status; + + /* line 0 == int1_n signal; line 1 == int2_n signal */ + if (line > 1) + return -EINVAL; + + irq_line = line; + + /* disable all interrupts on our line */ + memset(buf, 0xff, sizeof buf); + sih = sih_modules; + for (i = 0; i < ARRAY_SIZE(sih_modules); i++, sih++) { + + /* skip USB -- it's funky */ + if (!sih->bytes_ixr) + continue; + + status = twl4030_i2c_write(sih->module, buf, + sih->mask[line].imr_offset, sih->bytes_ixr); + if (status < 0) + pr_err("twl4030: err %d initializing %s %s\n", + status, sih->name, "IMR"); + + /* Maybe disable "exclusive" mode; buffer second pending irq; + * set Clear-On-Read (COR) bit. + * + * NOTE that sometimes COR polarity is documented as being + * inverted: for MADC and BCI, COR=1 means "clear on write". + * And for PWR_INT it's not documented... + */ + if (sih->set_cor) { + status = twl4030_i2c_write_u8(sih->module, + TWL4030_SIH_CTRL_COR_MASK, + sih->control_offset); + if (status < 0) + pr_err("twl4030: err %d initializing %s %s\n", + status, sih->name, "SIH_CTRL"); + } + } + + sih = sih_modules; + for (i = 0; i < ARRAY_SIZE(sih_modules); i++, sih++) { + u8 rxbuf[4]; + int j; + + /* skip USB */ + if (!sih->bytes_ixr) + continue; + + /* Clear pending interrupt status. Either the read was + * enough, or we need to write those bits. Repeat, in + * case an IRQ is pending (PENDDIS=0) ... that's not + * uncommon with PWR_INT.PWRON. + */ + for (j = 0; j < 2; j++) { + status = twl4030_i2c_read(sih->module, rxbuf, + sih->mask[line].isr_offset, sih->bytes_ixr); + if (status < 0) + pr_err("twl4030: err %d initializing %s %s\n", + status, sih->name, "ISR"); + + if (!sih->set_cor) + status = twl4030_i2c_write(sih->module, buf, + sih->mask[line].isr_offset, + sih->bytes_ixr); + /* else COR=1 means read sufficed. + * (for most SIH modules...) + */ + } + } + + return 0; +} + +static inline void activate_irq(int irq) +{ +#ifdef CONFIG_ARM + /* ARM requires an extra step to clear IRQ_NOREQUEST, which it + * sets on behalf of every irq_chip. Also sets IRQ_NOPROBE. + */ + set_irq_flags(irq, IRQF_VALID); +#else + /* same effect on other architectures */ + set_irq_noprobe(irq); +#endif +} + +/*----------------------------------------------------------------------*/ + +static DEFINE_SPINLOCK(sih_agent_lock); + +static struct workqueue_struct *wq; + +struct sih_agent { + int irq_base; + const struct sih *sih; + + u32 imr; + bool imr_change_pending; + struct work_struct mask_work; + + u32 edge_change; + struct work_struct edge_work; +}; + +static void twl4030_sih_do_mask(struct work_struct *work) +{ + struct sih_agent *agent; + const struct sih *sih; + union { + u8 bytes[4]; + u32 word; + } imr; + int status; + + agent = container_of(work, struct sih_agent, mask_work); + + /* see what work we have */ + spin_lock_irq(&sih_agent_lock); + if (agent->imr_change_pending) { + sih = agent->sih; + /* byte[0] gets overwritten as we write ... */ + imr.word = cpu_to_le32(agent->imr << 8); + agent->imr_change_pending = false; + } else + sih = NULL; + spin_unlock_irq(&sih_agent_lock); + if (!sih) + return; + + /* write the whole mask ... simpler than subsetting it */ + status = twl4030_i2c_write(sih->module, imr.bytes, + sih->mask[irq_line].imr_offset, sih->bytes_ixr); + if (status) + pr_err("twl4030: %s, %s --> %d\n", __func__, + "write", status); +} + +static void twl4030_sih_do_edge(struct work_struct *work) +{ + struct sih_agent *agent; + const struct sih *sih; + u8 bytes[6]; + u32 edge_change; + int status; + + agent = container_of(work, struct sih_agent, edge_work); + + /* see what work we have */ + spin_lock_irq(&sih_agent_lock); + edge_change = agent->edge_change; + agent->edge_change = 0;; + sih = edge_change ? agent->sih : NULL; + spin_unlock_irq(&sih_agent_lock); + if (!sih) + return; + + /* Read, reserving first byte for write scratch. Yes, this + * could be cached for some speedup ... but be careful about + * any processor on the other IRQ line, EDR registers are + * shared. + */ + status = twl4030_i2c_read(sih->module, bytes + 1, + sih->edr_offset, sih->bytes_edr); + if (status) { + pr_err("twl4030: %s, %s --> %d\n", __func__, + "read", status); + return; + } + + /* Modify only the bits we know must change */ + while (edge_change) { + int i = fls(edge_change) - 1; + struct irq_desc *d = irq_desc + i + agent->irq_base; + int byte = 1 + (i >> 2); + int off = (i & 0x3) * 2; + + bytes[byte] &= ~(0x03 << off); + + spin_lock_irq(&d->lock); + if (d->status & IRQ_TYPE_EDGE_RISING) + bytes[byte] |= BIT(off + 1); + if (d->status & IRQ_TYPE_EDGE_FALLING) + bytes[byte] |= BIT(off + 0); + spin_unlock_irq(&d->lock); + + edge_change &= ~BIT(i); + } + + /* Write */ + status = twl4030_i2c_write(sih->module, bytes, + sih->edr_offset, sih->bytes_edr); + if (status) + pr_err("twl4030: %s, %s --> %d\n", __func__, + "write", status); +} + +/*----------------------------------------------------------------------*/ + +/* + * All irq_chip methods get issued from code holding irq_desc[irq].lock, + * which can't perform the underlying I2C operations (because they sleep). + * So we must hand them off to a thread (workqueue) and cope with asynch + * completion, potentially including some re-ordering, of these requests. + */ + +static void twl4030_sih_mask(unsigned irq) +{ + struct sih_agent *sih = get_irq_chip_data(irq); + unsigned long flags; + + spin_lock_irqsave(&sih_agent_lock, flags); + sih->imr |= BIT(irq - sih->irq_base); + sih->imr_change_pending = true; + queue_work(wq, &sih->mask_work); + spin_unlock_irqrestore(&sih_agent_lock, flags); +} + +static void twl4030_sih_unmask(unsigned irq) +{ + struct sih_agent *sih = get_irq_chip_data(irq); + unsigned long flags; + + spin_lock_irqsave(&sih_agent_lock, flags); + sih->imr &= ~BIT(irq - sih->irq_base); + sih->imr_change_pending = true; + queue_work(wq, &sih->mask_work); + spin_unlock_irqrestore(&sih_agent_lock, flags); +} + +static int twl4030_sih_set_type(unsigned irq, unsigned trigger) +{ + struct sih_agent *sih = get_irq_chip_data(irq); + struct irq_desc *desc = irq_desc + irq; + unsigned long flags; + + if (trigger & ~(IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING)) + return -EINVAL; + + spin_lock_irqsave(&sih_agent_lock, flags); + if ((desc->status & IRQ_TYPE_SENSE_MASK) != trigger) { + desc->status &= ~IRQ_TYPE_SENSE_MASK; + desc->status |= trigger; + sih->edge_change |= BIT(irq - sih->irq_base); + queue_work(wq, &sih->edge_work); + } + spin_unlock_irqrestore(&sih_agent_lock, flags); + return 0; +} + +static struct irq_chip twl4030_sih_irq_chip = { + .name = "twl4030", + .mask = twl4030_sih_mask, + .unmask = twl4030_sih_unmask, + .set_type = twl4030_sih_set_type, +}; + +/*----------------------------------------------------------------------*/ + +static inline int sih_read_isr(const struct sih *sih) +{ + int status; + union { + u8 bytes[4]; + u32 word; + } isr; + + /* FIXME need retry-on-error ... */ + + isr.word = 0; + status = twl4030_i2c_read(sih->module, isr.bytes, + sih->mask[irq_line].isr_offset, sih->bytes_ixr); + + return (status < 0) ? status : le32_to_cpu(isr.word); +} + +/* + * Generic handler for SIH interrupts ... we "know" this is called + * in task context, with IRQs enabled. + */ +static void handle_twl4030_sih(unsigned irq, struct irq_desc *desc) +{ + struct sih_agent *agent = get_irq_data(irq); + const struct sih *sih = agent->sih; + int isr; + + /* reading ISR acks the IRQs, using clear-on-read mode */ + local_irq_enable(); + isr = sih_read_isr(sih); + local_irq_disable(); + + if (isr < 0) { + pr_err("twl4030: %s SIH, read ISR error %d\n", + sih->name, isr); + /* REVISIT: recover; eventually mask it all, etc */ + return; + } + + while (isr) { + irq = fls(isr); + irq--; + isr &= ~BIT(irq); + + if (irq < sih->bits) + generic_handle_irq(agent->irq_base + irq); + else + pr_err("twl4030: %s SIH, invalid ISR bit %d\n", + sih->name, irq); + } +} + +static unsigned twl4030_irq_next; + +/* returns the first IRQ used by this SIH bank, + * or negative errno + */ +int twl4030_sih_setup(int module) +{ + int sih_mod; + const struct sih *sih = NULL; + struct sih_agent *agent; + int i, irq; + int status = -EINVAL; + unsigned irq_base = twl4030_irq_next; + + /* only support modules with standard clear-on-read for now */ + for (sih_mod = 0, sih = sih_modules; + sih_mod < ARRAY_SIZE(sih_modules); + sih_mod++, sih++) { + if (sih->module == module && sih->set_cor) { + if (!WARN((irq_base + sih->bits) > NR_IRQS, + "irq %d for %s too big\n", + irq_base + sih->bits, + sih->name)) + status = 0; + break; + } + } + if (status < 0) + return status; + + agent = kzalloc(sizeof *agent, GFP_KERNEL); + if (!agent) + return -ENOMEM; + + status = 0; + + agent->irq_base = irq_base; + agent->sih = sih; + agent->imr = ~0; + INIT_WORK(&agent->mask_work, twl4030_sih_do_mask); + INIT_WORK(&agent->edge_work, twl4030_sih_do_edge); + + for (i = 0; i < sih->bits; i++) { + irq = irq_base + i; + + set_irq_chip_and_handler(irq, &twl4030_sih_irq_chip, + handle_edge_irq); + set_irq_chip_data(irq, agent); + activate_irq(irq); + } + + status = irq_base; + twl4030_irq_next += i; + + /* replace generic PIH handler (handle_simple_irq) */ + irq = sih_mod + twl4030_irq_base; + set_irq_data(irq, agent); + set_irq_chained_handler(irq, handle_twl4030_sih); + + pr_info("twl4030: %s (irq %d) chaining IRQs %d..%d\n", sih->name, + irq, irq_base, twl4030_irq_next - 1); + + return status; +} + +/* FIXME need a call to reverse twl4030_sih_setup() ... */ + + +/*----------------------------------------------------------------------*/ + +/* FIXME pass in which interrupt line we'll use ... */ +#define twl_irq_line 0 + +int twl_init_irq(int irq_num, unsigned irq_base, unsigned irq_end) +{ + static struct irq_chip twl4030_irq_chip; + + int status; + int i; + struct task_struct *task; + + /* + * Mask and clear all TWL4030 interrupts since initially we do + * not have any TWL4030 module interrupt handlers present + */ + status = twl4030_init_sih_modules(twl_irq_line); + if (status < 0) + return status; + + wq = create_singlethread_workqueue("twl4030-irqchip"); + if (!wq) { + pr_err("twl4030: workqueue FAIL\n"); + return -ESRCH; + } + + twl4030_irq_base = irq_base; + + /* install an irq handler for each of the SIH modules; + * clone dummy irq_chip since PIH can't *do* anything + */ + twl4030_irq_chip = dummy_irq_chip; + twl4030_irq_chip.name = "twl4030"; + + twl4030_sih_irq_chip.ack = dummy_irq_chip.ack; + + for (i = irq_base; i < irq_end; i++) { + set_irq_chip_and_handler(i, &twl4030_irq_chip, + handle_simple_irq); + activate_irq(i); + } + twl4030_irq_next = i; + pr_info("twl4030: %s (irq %d) chaining IRQs %d..%d\n", "PIH", + irq_num, irq_base, twl4030_irq_next - 1); + + /* ... and the PWR_INT module ... */ + status = twl4030_sih_setup(TWL4030_MODULE_INT); + if (status < 0) { + pr_err("twl4030: sih_setup PWR INT --> %d\n", status); + goto fail; + } + + /* install an irq handler to demultiplex the TWL4030 interrupt */ + task = start_twl4030_irq_thread(irq_num); + if (!task) { + pr_err("twl4030: irq thread FAIL\n"); + status = -ESRCH; + goto fail; + } + + set_irq_data(irq_num, task); + set_irq_chained_handler(irq_num, handle_twl4030_pih); + + return status; + +fail: + for (i = irq_base; i < irq_end; i++) + set_irq_chip_and_handler(i, NULL, NULL); + destroy_workqueue(wq); + wq = NULL; + return status; +} + +int twl_exit_irq(void) +{ + /* FIXME undo twl_init_irq() */ + if (twl4030_irq_base) { + pr_err("twl4030: can't yet clean up IRQs?\n"); + return -ENOSYS; + } + return 0; +} diff --git a/drivers/mfd/wm8350-core.c b/drivers/mfd/wm8350-core.c index bf87f675e7fa..0d47fb9e4b3b 100644 --- a/drivers/mfd/wm8350-core.c +++ b/drivers/mfd/wm8350-core.c @@ -183,6 +183,9 @@ static int wm8350_write(struct wm8350 *wm8350, u8 reg, int num_regs, u16 *src) (wm8350->reg_cache[i] & ~wm8350_reg_io_map[i].writable) | src[i - reg]; + /* Don't store volatile bits */ + wm8350->reg_cache[i] &= ~wm8350_reg_io_map[i].vol; + src[i - reg] = cpu_to_be16(src[i - reg]); } @@ -1120,6 +1123,7 @@ static int wm8350_create_cache(struct wm8350 *wm8350, int mode) } value = be16_to_cpu(value); value &= wm8350_reg_io_map[i].readable; + value &= ~wm8350_reg_io_map[i].vol; wm8350->reg_cache[i] = value; } else wm8350->reg_cache[i] = reg_map[i]; @@ -1128,7 +1132,6 @@ static int wm8350_create_cache(struct wm8350 *wm8350, int mode) out: return ret; } -EXPORT_SYMBOL_GPL(wm8350_create_cache); /* * Register a client device. This is non-fatal since there is no need to diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index ad301ace6085..0b71ebc074b6 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -464,6 +464,12 @@ config MIPS_JAZZ_SONIC This is the driver for the onboard card of MIPS Magnum 4000, Acer PICA, Olivetti M700-10 and a few other identical OEM systems. +config XTENSA_XT2000_SONIC + tristate "Xtensa XT2000 onboard SONIC Ethernet support" + depends on XTENSA_PLATFORM_XT2000 + help + This is the driver for the onboard card of the Xtensa XT2000 board. + config MIPS_AU1X00_ENET bool "MIPS AU1000 Ethernet support" depends on SOC_AU1X00 @@ -2504,6 +2510,15 @@ config PASEMI_MAC This driver supports the on-chip 1/10Gbit Ethernet controller on PA Semi's PWRficient line of chips. +config MLX4_EN + tristate "Mellanox Technologies 10Gbit Ethernet support" + depends on PCI && INET + select MLX4_CORE + select INET_LRO + help + This driver supports Mellanox Technologies ConnectX Ethernet + devices. + config MLX4_CORE tristate depends on PCI diff --git a/drivers/net/Makefile b/drivers/net/Makefile index fa2510b2e609..f19acf8b9220 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -227,6 +227,8 @@ pasemi_mac_driver-objs := pasemi_mac.o pasemi_mac_ethtool.o obj-$(CONFIG_MLX4_CORE) += mlx4/ obj-$(CONFIG_ENC28J60) += enc28j60.o +obj-$(CONFIG_XTENSA_XT2000_SONIC) += xtsonic.o + obj-$(CONFIG_MACB) += macb.o obj-$(CONFIG_ARM) += arm/ diff --git a/drivers/net/fec_mpc52xx_phy.c b/drivers/net/fec_mpc52xx_phy.c index 08e18bcb970f..45dd9bdc5d62 100644 --- a/drivers/net/fec_mpc52xx_phy.c +++ b/drivers/net/fec_mpc52xx_phy.c @@ -2,6 +2,7 @@ * Driver for the MPC5200 Fast Ethernet Controller - MDIO bus driver * * Copyright (C) 2007 Domen Puncer, Telargo, Inc. + * Copyright (C) 2008 Wolfram Sang, Pengutronix * * This file is licensed under the terms of the GNU General Public License * version 2. This program is licensed "as is" without any warranty of any @@ -21,58 +22,45 @@ struct mpc52xx_fec_mdio_priv { struct mpc52xx_fec __iomem *regs; }; -static int mpc52xx_fec_mdio_read(struct mii_bus *bus, int phy_id, int reg) +static int mpc52xx_fec_mdio_transfer(struct mii_bus *bus, int phy_id, + int reg, u32 value) { struct mpc52xx_fec_mdio_priv *priv = bus->priv; struct mpc52xx_fec __iomem *fec; int tries = 100; - u32 request = FEC_MII_READ_FRAME; + + value |= (phy_id << FEC_MII_DATA_PA_SHIFT) & FEC_MII_DATA_PA_MSK; + value |= (reg << FEC_MII_DATA_RA_SHIFT) & FEC_MII_DATA_RA_MSK; fec = priv->regs; out_be32(&fec->ievent, FEC_IEVENT_MII); - - request |= (phy_id << FEC_MII_DATA_PA_SHIFT) & FEC_MII_DATA_PA_MSK; - request |= (reg << FEC_MII_DATA_RA_SHIFT) & FEC_MII_DATA_RA_MSK; - - out_be32(&priv->regs->mii_data, request); + out_be32(&priv->regs->mii_data, value); /* wait for it to finish, this takes about 23 us on lite5200b */ while (!(in_be32(&fec->ievent) & FEC_IEVENT_MII) && --tries) udelay(5); - if (tries == 0) + if (!tries) return -ETIMEDOUT; - return in_be32(&priv->regs->mii_data) & FEC_MII_DATA_DATAMSK; + return value & FEC_MII_DATA_OP_RD ? + in_be32(&priv->regs->mii_data) & FEC_MII_DATA_DATAMSK : 0; } -static int mpc52xx_fec_mdio_write(struct mii_bus *bus, int phy_id, int reg, u16 data) +static int mpc52xx_fec_mdio_read(struct mii_bus *bus, int phy_id, int reg) { - struct mpc52xx_fec_mdio_priv *priv = bus->priv; - struct mpc52xx_fec __iomem *fec; - u32 value = data; - int tries = 100; - - fec = priv->regs; - out_be32(&fec->ievent, FEC_IEVENT_MII); - - value |= FEC_MII_WRITE_FRAME; - value |= (phy_id << FEC_MII_DATA_PA_SHIFT) & FEC_MII_DATA_PA_MSK; - value |= (reg << FEC_MII_DATA_RA_SHIFT) & FEC_MII_DATA_RA_MSK; - - out_be32(&priv->regs->mii_data, value); - - /* wait for request to finish */ - while (!(in_be32(&fec->ievent) & FEC_IEVENT_MII) && --tries) - udelay(5); - - if (tries == 0) - return -ETIMEDOUT; + return mpc52xx_fec_mdio_transfer(bus, phy_id, reg, FEC_MII_READ_FRAME); +} - return 0; +static int mpc52xx_fec_mdio_write(struct mii_bus *bus, int phy_id, int reg, + u16 data) +{ + return mpc52xx_fec_mdio_transfer(bus, phy_id, reg, + data | FEC_MII_WRITE_FRAME); } -static int mpc52xx_fec_mdio_probe(struct of_device *of, const struct of_device_id *match) +static int mpc52xx_fec_mdio_probe(struct of_device *of, + const struct of_device_id *match) { struct device *dev = &of->dev; struct device_node *np = of->node; @@ -131,7 +119,8 @@ static int mpc52xx_fec_mdio_probe(struct of_device *of, const struct of_device_i dev_set_drvdata(dev, bus); /* set MII speed */ - out_be32(&priv->regs->mii_speed, ((mpc52xx_find_ipb_freq(of->node) >> 20) / 5) << 1); + out_be32(&priv->regs->mii_speed, + ((mpc52xx_find_ipb_freq(of->node) >> 20) / 5) << 1); /* enable MII interrupt */ out_be32(&priv->regs->imask, in_be32(&priv->regs->imask) | FEC_IMASK_MII); diff --git a/drivers/net/ibm_newemac/core.c b/drivers/net/ibm_newemac/core.c index efcf21c9f5c7..2ee2622258f5 100644 --- a/drivers/net/ibm_newemac/core.c +++ b/drivers/net/ibm_newemac/core.c @@ -2604,8 +2604,16 @@ static int __devinit emac_init_config(struct emac_instance *dev) if (of_device_is_compatible(np, "ibm,emac-440ep") || of_device_is_compatible(np, "ibm,emac-440gr")) dev->features |= EMAC_FTR_440EP_PHY_CLK_FIX; - if (of_device_is_compatible(np, "ibm,emac-405ez")) + if (of_device_is_compatible(np, "ibm,emac-405ez")) { +#ifdef CONFIG_IBM_NEW_EMAC_NO_FLOW_CONTROL dev->features |= EMAC_FTR_NO_FLOW_CONTROL_40x; +#else + printk(KERN_ERR "%s: Flow control not disabled!\n", + np->full_name); + return -ENXIO; +#endif + } + } /* Fixup some feature bits based on the device tree */ diff --git a/drivers/net/ibm_newemac/mal.c b/drivers/net/ibm_newemac/mal.c index 1839d3f154a3..ecf9798987fa 100644 --- a/drivers/net/ibm_newemac/mal.c +++ b/drivers/net/ibm_newemac/mal.c @@ -280,9 +280,11 @@ static irqreturn_t mal_txeob(int irq, void *dev_instance) mal_schedule_poll(mal); set_mal_dcrn(mal, MAL_TXEOBISR, r); +#ifdef CONFIG_PPC_DCR_NATIVE if (mal_has_feature(mal, MAL_FTR_CLEAR_ICINTSTAT)) mtdcri(SDR0, DCRN_SDR_ICINTSTAT, (mfdcri(SDR0, DCRN_SDR_ICINTSTAT) | ICINTSTAT_ICTX)); +#endif return IRQ_HANDLED; } @@ -298,9 +300,11 @@ static irqreturn_t mal_rxeob(int irq, void *dev_instance) mal_schedule_poll(mal); set_mal_dcrn(mal, MAL_RXEOBISR, r); +#ifdef CONFIG_PPC_DCR_NATIVE if (mal_has_feature(mal, MAL_FTR_CLEAR_ICINTSTAT)) mtdcri(SDR0, DCRN_SDR_ICINTSTAT, (mfdcri(SDR0, DCRN_SDR_ICINTSTAT) | ICINTSTAT_ICRX)); +#endif return IRQ_HANDLED; } @@ -572,9 +576,18 @@ static int __devinit mal_probe(struct of_device *ofdev, goto fail; } - if (of_device_is_compatible(ofdev->node, "ibm,mcmal-405ez")) + if (of_device_is_compatible(ofdev->node, "ibm,mcmal-405ez")) { +#if defined(CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT) && \ + defined(CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR) mal->features |= (MAL_FTR_CLEAR_ICINTSTAT | MAL_FTR_COMMON_ERR_INT); +#else + printk(KERN_ERR "%s: Support for 405EZ not enabled!\n", + ofdev->node->full_name); + err = -ENODEV; + goto fail; +#endif + } mal->txeob_irq = irq_of_parse_and_map(ofdev->node, 0); mal->rxeob_irq = irq_of_parse_and_map(ofdev->node, 1); diff --git a/drivers/net/mlx4/Makefile b/drivers/net/mlx4/Makefile index 0952a6528f58..a7a97bf998f8 100644 --- a/drivers/net/mlx4/Makefile +++ b/drivers/net/mlx4/Makefile @@ -1,4 +1,9 @@ obj-$(CONFIG_MLX4_CORE) += mlx4_core.o mlx4_core-y := alloc.o catas.o cmd.o cq.o eq.o fw.o icm.o intf.o main.o mcg.o \ - mr.o pd.o profile.o qp.o reset.o srq.o + mr.o pd.o port.o profile.o qp.o reset.o srq.o + +obj-$(CONFIG_MLX4_EN) += mlx4_en.o + +mlx4_en-y := en_main.o en_tx.o en_rx.o en_params.o en_port.o en_cq.o \ + en_resources.o en_netdev.o diff --git a/drivers/net/mlx4/alloc.c b/drivers/net/mlx4/alloc.c index b411b79d72ad..ad95d5f7b630 100644 --- a/drivers/net/mlx4/alloc.c +++ b/drivers/net/mlx4/alloc.c @@ -48,13 +48,16 @@ u32 mlx4_bitmap_alloc(struct mlx4_bitmap *bitmap) obj = find_next_zero_bit(bitmap->table, bitmap->max, bitmap->last); if (obj >= bitmap->max) { - bitmap->top = (bitmap->top + bitmap->max) & bitmap->mask; + bitmap->top = (bitmap->top + bitmap->max + bitmap->reserved_top) + & bitmap->mask; obj = find_first_zero_bit(bitmap->table, bitmap->max); } if (obj < bitmap->max) { set_bit(obj, bitmap->table); - bitmap->last = (obj + 1) & (bitmap->max - 1); + bitmap->last = (obj + 1); + if (bitmap->last == bitmap->max) + bitmap->last = 0; obj |= bitmap->top; } else obj = -1; @@ -66,16 +69,90 @@ u32 mlx4_bitmap_alloc(struct mlx4_bitmap *bitmap) void mlx4_bitmap_free(struct mlx4_bitmap *bitmap, u32 obj) { - obj &= bitmap->max - 1; + mlx4_bitmap_free_range(bitmap, obj, 1); +} + +static unsigned long find_aligned_range(unsigned long *bitmap, + u32 start, u32 nbits, + int len, int align) +{ + unsigned long end, i; + +again: + start = ALIGN(start, align); + + while ((start < nbits) && test_bit(start, bitmap)) + start += align; + + if (start >= nbits) + return -1; + + end = start+len; + if (end > nbits) + return -1; + + for (i = start + 1; i < end; i++) { + if (test_bit(i, bitmap)) { + start = i + 1; + goto again; + } + } + + return start; +} + +u32 mlx4_bitmap_alloc_range(struct mlx4_bitmap *bitmap, int cnt, int align) +{ + u32 obj, i; + + if (likely(cnt == 1 && align == 1)) + return mlx4_bitmap_alloc(bitmap); + + spin_lock(&bitmap->lock); + + obj = find_aligned_range(bitmap->table, bitmap->last, + bitmap->max, cnt, align); + if (obj >= bitmap->max) { + bitmap->top = (bitmap->top + bitmap->max + bitmap->reserved_top) + & bitmap->mask; + obj = find_aligned_range(bitmap->table, 0, bitmap->max, + cnt, align); + } + + if (obj < bitmap->max) { + for (i = 0; i < cnt; i++) + set_bit(obj + i, bitmap->table); + if (obj == bitmap->last) { + bitmap->last = (obj + cnt); + if (bitmap->last >= bitmap->max) + bitmap->last = 0; + } + obj |= bitmap->top; + } else + obj = -1; + + spin_unlock(&bitmap->lock); + + return obj; +} + +void mlx4_bitmap_free_range(struct mlx4_bitmap *bitmap, u32 obj, int cnt) +{ + u32 i; + + obj &= bitmap->max + bitmap->reserved_top - 1; spin_lock(&bitmap->lock); - clear_bit(obj, bitmap->table); + for (i = 0; i < cnt; i++) + clear_bit(obj + i, bitmap->table); bitmap->last = min(bitmap->last, obj); - bitmap->top = (bitmap->top + bitmap->max) & bitmap->mask; + bitmap->top = (bitmap->top + bitmap->max + bitmap->reserved_top) + & bitmap->mask; spin_unlock(&bitmap->lock); } -int mlx4_bitmap_init(struct mlx4_bitmap *bitmap, u32 num, u32 mask, u32 reserved) +int mlx4_bitmap_init(struct mlx4_bitmap *bitmap, u32 num, u32 mask, + u32 reserved_bot, u32 reserved_top) { int i; @@ -85,14 +162,16 @@ int mlx4_bitmap_init(struct mlx4_bitmap *bitmap, u32 num, u32 mask, u32 reserved bitmap->last = 0; bitmap->top = 0; - bitmap->max = num; + bitmap->max = num - reserved_top; bitmap->mask = mask; + bitmap->reserved_top = reserved_top; spin_lock_init(&bitmap->lock); - bitmap->table = kzalloc(BITS_TO_LONGS(num) * sizeof (long), GFP_KERNEL); + bitmap->table = kzalloc(BITS_TO_LONGS(bitmap->max) * + sizeof (long), GFP_KERNEL); if (!bitmap->table) return -ENOMEM; - for (i = 0; i < reserved; ++i) + for (i = 0; i < reserved_bot; ++i) set_bit(i, bitmap->table); return 0; diff --git a/drivers/net/mlx4/cq.c b/drivers/net/mlx4/cq.c index 9bb50e3f8974..b7ad2829d67e 100644 --- a/drivers/net/mlx4/cq.c +++ b/drivers/net/mlx4/cq.c @@ -300,7 +300,7 @@ int mlx4_init_cq_table(struct mlx4_dev *dev) INIT_RADIX_TREE(&cq_table->tree, GFP_ATOMIC); err = mlx4_bitmap_init(&cq_table->bitmap, dev->caps.num_cqs, - dev->caps.num_cqs - 1, dev->caps.reserved_cqs); + dev->caps.num_cqs - 1, dev->caps.reserved_cqs, 0); if (err) return err; diff --git a/drivers/net/mlx4/en_cq.c b/drivers/net/mlx4/en_cq.c new file mode 100644 index 000000000000..1368a8010af4 --- /dev/null +++ b/drivers/net/mlx4/en_cq.c @@ -0,0 +1,146 @@ +/* + * Copyright (c) 2007 Mellanox Technologies. All rights reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the + * OpenIB.org BSD license below: + * + * Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * - Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * + * - Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + * + */ + +#include <linux/mlx4/cq.h> +#include <linux/mlx4/qp.h> +#include <linux/mlx4/cmd.h> + +#include "mlx4_en.h" + +static void mlx4_en_cq_event(struct mlx4_cq *cq, enum mlx4_event event) +{ + return; +} + + +int mlx4_en_create_cq(struct mlx4_en_priv *priv, + struct mlx4_en_cq *cq, + int entries, int ring, enum cq_type mode) +{ + struct mlx4_en_dev *mdev = priv->mdev; + int err; + + cq->size = entries; + if (mode == RX) + cq->buf_size = cq->size * sizeof(struct mlx4_cqe); + else + cq->buf_size = sizeof(struct mlx4_cqe); + + cq->ring = ring; + cq->is_tx = mode; + spin_lock_init(&cq->lock); + + err = mlx4_alloc_hwq_res(mdev->dev, &cq->wqres, + cq->buf_size, 2 * PAGE_SIZE); + if (err) + return err; + + err = mlx4_en_map_buffer(&cq->wqres.buf); + if (err) + mlx4_free_hwq_res(mdev->dev, &cq->wqres, cq->buf_size); + + return err; +} + +int mlx4_en_activate_cq(struct mlx4_en_priv *priv, struct mlx4_en_cq *cq) +{ + struct mlx4_en_dev *mdev = priv->mdev; + int err; + + cq->dev = mdev->pndev[priv->port]; + cq->mcq.set_ci_db = cq->wqres.db.db; + cq->mcq.arm_db = cq->wqres.db.db + 1; + *cq->mcq.set_ci_db = 0; + *cq->mcq.arm_db = 0; + cq->buf = (struct mlx4_cqe *) cq->wqres.buf.direct.buf; + memset(cq->buf, 0, cq->buf_size); + + err = mlx4_cq_alloc(mdev->dev, cq->size, &cq->wqres.mtt, &mdev->priv_uar, + cq->wqres.db.dma, &cq->mcq, cq->is_tx); + if (err) + return err; + + cq->mcq.comp = cq->is_tx ? mlx4_en_tx_irq : mlx4_en_rx_irq; + cq->mcq.event = mlx4_en_cq_event; + + if (cq->is_tx) { + init_timer(&cq->timer); + cq->timer.function = mlx4_en_poll_tx_cq; + cq->timer.data = (unsigned long) cq; + } else { + netif_napi_add(cq->dev, &cq->napi, mlx4_en_poll_rx_cq, 64); + napi_enable(&cq->napi); + } + + return 0; +} + +void mlx4_en_destroy_cq(struct mlx4_en_priv *priv, struct mlx4_en_cq *cq) +{ + struct mlx4_en_dev *mdev = priv->mdev; + + mlx4_en_unmap_buffer(&cq->wqres.buf); + mlx4_free_hwq_res(mdev->dev, &cq->wqres, cq->buf_size); + cq->buf_size = 0; + cq->buf = NULL; +} + +void mlx4_en_deactivate_cq(struct mlx4_en_priv *priv, struct mlx4_en_cq *cq) +{ + struct mlx4_en_dev *mdev = priv->mdev; + + if (cq->is_tx) + del_timer(&cq->timer); + else + napi_disable(&cq->napi); + + mlx4_cq_free(mdev->dev, &cq->mcq); +} + +/* Set rx cq moderation parameters */ +int mlx4_en_set_cq_moder(struct mlx4_en_priv *priv, struct mlx4_en_cq *cq) +{ + return mlx4_cq_modify(priv->mdev->dev, &cq->mcq, + cq->moder_cnt, cq->moder_time); +} + +int mlx4_en_arm_cq(struct mlx4_en_priv *priv, struct mlx4_en_cq *cq) +{ + cq->armed = 1; + mlx4_cq_arm(&cq->mcq, MLX4_CQ_DB_REQ_NOT, priv->mdev->uar_map, + &priv->mdev->uar_lock); + + return 0; +} + + diff --git a/drivers/net/mlx4/en_main.c b/drivers/net/mlx4/en_main.c new file mode 100644 index 000000000000..1b0eebf84f76 --- /dev/null +++ b/drivers/net/mlx4/en_main.c @@ -0,0 +1,254 @@ +/* + * Copyright (c) 2007 Mellanox Technologies. All rights reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the + * OpenIB.org BSD license below: + * + * Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * - Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * + * - Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + * + */ + +#include <linux/cpumask.h> +#include <linux/module.h> +#include <linux/delay.h> +#include <linux/netdevice.h> +#include <linux/cpumask.h> + +#include <linux/mlx4/driver.h> +#include <linux/mlx4/device.h> +#include <linux/mlx4/cmd.h> + +#include "mlx4_en.h" + +MODULE_AUTHOR("Liran Liss, Yevgeny Petrilin"); +MODULE_DESCRIPTION("Mellanox ConnectX HCA Ethernet driver"); +MODULE_LICENSE("Dual BSD/GPL"); +MODULE_VERSION(DRV_VERSION " ("DRV_RELDATE")"); + +static const char mlx4_en_version[] = + DRV_NAME ": Mellanox ConnectX HCA Ethernet driver v" + DRV_VERSION " (" DRV_RELDATE ")\n"; + +static void mlx4_en_event(struct mlx4_dev *dev, void *endev_ptr, + enum mlx4_dev_event event, int port) +{ + struct mlx4_en_dev *mdev = (struct mlx4_en_dev *) endev_ptr; + struct mlx4_en_priv *priv; + + if (!mdev->pndev[port]) + return; + + priv = netdev_priv(mdev->pndev[port]); + switch (event) { + case MLX4_DEV_EVENT_PORT_UP: + case MLX4_DEV_EVENT_PORT_DOWN: + /* To prevent races, we poll the link state in a separate + task rather than changing it here */ + priv->link_state = event; + queue_work(mdev->workqueue, &priv->linkstate_task); + break; + + case MLX4_DEV_EVENT_CATASTROPHIC_ERROR: + mlx4_err(mdev, "Internal error detected, restarting device\n"); + break; + + default: + mlx4_warn(mdev, "Unhandled event: %d\n", event); + } +} + +static void mlx4_en_remove(struct mlx4_dev *dev, void *endev_ptr) +{ + struct mlx4_en_dev *mdev = endev_ptr; + int i; + + mutex_lock(&mdev->state_lock); + mdev->device_up = false; + mutex_unlock(&mdev->state_lock); + + mlx4_foreach_port(i, dev, MLX4_PORT_TYPE_ETH) + if (mdev->pndev[i]) + mlx4_en_destroy_netdev(mdev->pndev[i]); + + flush_workqueue(mdev->workqueue); + destroy_workqueue(mdev->workqueue); + mlx4_mr_free(dev, &mdev->mr); + mlx4_uar_free(dev, &mdev->priv_uar); + mlx4_pd_free(dev, mdev->priv_pdn); + kfree(mdev); +} + +static void *mlx4_en_add(struct mlx4_dev *dev) +{ + static int mlx4_en_version_printed; + struct mlx4_en_dev *mdev; + int i; + int err; + + if (!mlx4_en_version_printed) { + printk(KERN_INFO "%s", mlx4_en_version); + mlx4_en_version_printed++; + } + + mdev = kzalloc(sizeof *mdev, GFP_KERNEL); + if (!mdev) { + dev_err(&dev->pdev->dev, "Device struct alloc failed, " + "aborting.\n"); + err = -ENOMEM; + goto err_free_res; + } + + if (mlx4_pd_alloc(dev, &mdev->priv_pdn)) + goto err_free_dev; + + if (mlx4_uar_alloc(dev, &mdev->priv_uar)) + goto err_pd; + + mdev->uar_map = ioremap(mdev->priv_uar.pfn << PAGE_SHIFT, PAGE_SIZE); + if (!mdev->uar_map) + goto err_uar; + spin_lock_init(&mdev->uar_lock); + + mdev->dev = dev; + mdev->dma_device = &(dev->pdev->dev); + mdev->pdev = dev->pdev; + mdev->device_up = false; + + mdev->LSO_support = !!(dev->caps.flags & (1 << 15)); + if (!mdev->LSO_support) + mlx4_warn(mdev, "LSO not supported, please upgrade to later " + "FW version to enable LSO\n"); + + if (mlx4_mr_alloc(mdev->dev, mdev->priv_pdn, 0, ~0ull, + MLX4_PERM_LOCAL_WRITE | MLX4_PERM_LOCAL_READ, + 0, 0, &mdev->mr)) { + mlx4_err(mdev, "Failed allocating memory region\n"); + goto err_uar; + } + if (mlx4_mr_enable(mdev->dev, &mdev->mr)) { + mlx4_err(mdev, "Failed enabling memory region\n"); + goto err_mr; + } + + /* Build device profile according to supplied module parameters */ + err = mlx4_en_get_profile(mdev); + if (err) { + mlx4_err(mdev, "Bad module parameters, aborting.\n"); + goto err_mr; + } + + /* Configure wich ports to start according to module parameters */ + mdev->port_cnt = 0; + mlx4_foreach_port(i, dev, MLX4_PORT_TYPE_ETH) + mdev->port_cnt++; + + /* If we did not receive an explicit number of Rx rings, default to + * the number of completion vectors populated by the mlx4_core */ + mlx4_foreach_port(i, dev, MLX4_PORT_TYPE_ETH) { + mlx4_info(mdev, "Using %d tx rings for port:%d\n", + mdev->profile.prof[i].tx_ring_num, i); + if (!mdev->profile.prof[i].rx_ring_num) { + mdev->profile.prof[i].rx_ring_num = 1; + mlx4_info(mdev, "Defaulting to %d rx rings for port:%d\n", + 1, i); + } else + mlx4_info(mdev, "Using %d rx rings for port:%d\n", + mdev->profile.prof[i].rx_ring_num, i); + } + + /* Create our own workqueue for reset/multicast tasks + * Note: we cannot use the shared workqueue because of deadlocks caused + * by the rtnl lock */ + mdev->workqueue = create_singlethread_workqueue("mlx4_en"); + if (!mdev->workqueue) { + err = -ENOMEM; + goto err_close_nic; + } + + /* At this stage all non-port specific tasks are complete: + * mark the card state as up */ + mutex_init(&mdev->state_lock); + mdev->device_up = true; + + /* Setup ports */ + + /* Create a netdev for each port */ + mlx4_foreach_port(i, dev, MLX4_PORT_TYPE_ETH) { + mlx4_info(mdev, "Activating port:%d\n", i); + if (mlx4_en_init_netdev(mdev, i, &mdev->profile.prof[i])) { + mdev->pndev[i] = NULL; + goto err_free_netdev; + } + } + return mdev; + + +err_free_netdev: + mlx4_foreach_port(i, dev, MLX4_PORT_TYPE_ETH) { + if (mdev->pndev[i]) + mlx4_en_destroy_netdev(mdev->pndev[i]); + } + + mutex_lock(&mdev->state_lock); + mdev->device_up = false; + mutex_unlock(&mdev->state_lock); + flush_workqueue(mdev->workqueue); + + /* Stop event queue before we drop down to release shared SW state */ + +err_close_nic: + destroy_workqueue(mdev->workqueue); +err_mr: + mlx4_mr_free(dev, &mdev->mr); +err_uar: + mlx4_uar_free(dev, &mdev->priv_uar); +err_pd: + mlx4_pd_free(dev, mdev->priv_pdn); +err_free_dev: + kfree(mdev); +err_free_res: + return NULL; +} + +static struct mlx4_interface mlx4_en_interface = { + .add = mlx4_en_add, + .remove = mlx4_en_remove, + .event = mlx4_en_event, +}; + +static int __init mlx4_en_init(void) +{ + return mlx4_register_interface(&mlx4_en_interface); +} + +static void __exit mlx4_en_cleanup(void) +{ + mlx4_unregister_interface(&mlx4_en_interface); +} + +module_init(mlx4_en_init); +module_exit(mlx4_en_cleanup); + diff --git a/drivers/net/mlx4/en_netdev.c b/drivers/net/mlx4/en_netdev.c new file mode 100644 index 000000000000..a339afbeed38 --- /dev/null +++ b/drivers/net/mlx4/en_netdev.c @@ -0,0 +1,1088 @@ +/* + * Copyright (c) 2007 Mellanox Technologies. All rights reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the + * OpenIB.org BSD license below: + * + * Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * - Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * + * - Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + * + */ + +#include <linux/etherdevice.h> +#include <linux/tcp.h> +#include <linux/if_vlan.h> +#include <linux/delay.h> + +#include <linux/mlx4/driver.h> +#include <linux/mlx4/device.h> +#include <linux/mlx4/cmd.h> +#include <linux/mlx4/cq.h> + +#include "mlx4_en.h" +#include "en_port.h" + + +static void mlx4_en_vlan_rx_register(struct net_device *dev, struct vlan_group *grp) +{ + struct mlx4_en_priv *priv = netdev_priv(dev); + struct mlx4_en_dev *mdev = priv->mdev; + int err; + + mlx4_dbg(HW, priv, "Registering VLAN group:%p\n", grp); + priv->vlgrp = grp; + + mutex_lock(&mdev->state_lock); + if (mdev->device_up && priv->port_up) { + err = mlx4_SET_VLAN_FLTR(mdev->dev, priv->port, grp); + if (err) + mlx4_err(mdev, "Failed configuring VLAN filter\n"); + } + mutex_unlock(&mdev->state_lock); +} + +static void mlx4_en_vlan_rx_add_vid(struct net_device *dev, unsigned short vid) +{ + struct mlx4_en_priv *priv = netdev_priv(dev); + struct mlx4_en_dev *mdev = priv->mdev; + int err; + + if (!priv->vlgrp) + return; + + mlx4_dbg(HW, priv, "adding VLAN:%d (vlgrp entry:%p)\n", + vid, vlan_group_get_device(priv->vlgrp, vid)); + + /* Add VID to port VLAN filter */ + mutex_lock(&mdev->state_lock); + if (mdev->device_up && priv->port_up) { + err = mlx4_SET_VLAN_FLTR(mdev->dev, priv->port, priv->vlgrp); + if (err) + mlx4_err(mdev, "Failed configuring VLAN filter\n"); + } + mutex_unlock(&mdev->state_lock); +} + +static void mlx4_en_vlan_rx_kill_vid(struct net_device *dev, unsigned short vid) +{ + struct mlx4_en_priv *priv = netdev_priv(dev); + struct mlx4_en_dev *mdev = priv->mdev; + int err; + + if (!priv->vlgrp) + return; + + mlx4_dbg(HW, priv, "Killing VID:%d (vlgrp:%p vlgrp " + "entry:%p)\n", vid, priv->vlgrp, + vlan_group_get_device(priv->vlgrp, vid)); + vlan_group_set_device(priv->vlgrp, vid, NULL); + + /* Remove VID from port VLAN filter */ + mutex_lock(&mdev->state_lock); + if (mdev->device_up && priv->port_up) { + err = mlx4_SET_VLAN_FLTR(mdev->dev, priv->port, priv->vlgrp); + if (err) + mlx4_err(mdev, "Failed configuring VLAN filter\n"); + } + mutex_unlock(&mdev->state_lock); +} + +static u64 mlx4_en_mac_to_u64(u8 *addr) +{ + u64 mac = 0; + int i; + + for (i = 0; i < ETH_ALEN; i++) { + mac <<= 8; + mac |= addr[i]; + } + return mac; +} + +static int mlx4_en_set_mac(struct net_device *dev, void *addr) +{ + struct mlx4_en_priv *priv = netdev_priv(dev); + struct mlx4_en_dev *mdev = priv->mdev; + struct sockaddr *saddr = addr; + + if (!is_valid_ether_addr(saddr->sa_data)) + return -EADDRNOTAVAIL; + + memcpy(dev->dev_addr, saddr->sa_data, ETH_ALEN); + priv->mac = mlx4_en_mac_to_u64(dev->dev_addr); + queue_work(mdev->workqueue, &priv->mac_task); + return 0; +} + +static void mlx4_en_do_set_mac(struct work_struct *work) +{ + struct mlx4_en_priv *priv = container_of(work, struct mlx4_en_priv, + mac_task); + struct mlx4_en_dev *mdev = priv->mdev; + int err = 0; + + mutex_lock(&mdev->state_lock); + if (priv->port_up) { + /* Remove old MAC and insert the new one */ + mlx4_unregister_mac(mdev->dev, priv->port, priv->mac_index); + err = mlx4_register_mac(mdev->dev, priv->port, + priv->mac, &priv->mac_index); + if (err) + mlx4_err(mdev, "Failed changing HW MAC address\n"); + } else + mlx4_dbg(HW, priv, "Port is down, exiting...\n"); + + mutex_unlock(&mdev->state_lock); +} + +static void mlx4_en_clear_list(struct net_device *dev) +{ + struct mlx4_en_priv *priv = netdev_priv(dev); + struct dev_mc_list *plist = priv->mc_list; + struct dev_mc_list *next; + + while (plist) { + next = plist->next; + kfree(plist); + plist = next; + } + priv->mc_list = NULL; +} + +static void mlx4_en_cache_mclist(struct net_device *dev) +{ + struct mlx4_en_priv *priv = netdev_priv(dev); + struct mlx4_en_dev *mdev = priv->mdev; + struct dev_mc_list *mclist; + struct dev_mc_list *tmp; + struct dev_mc_list *plist = NULL; + + for (mclist = dev->mc_list; mclist; mclist = mclist->next) { + tmp = kmalloc(sizeof(struct dev_mc_list), GFP_ATOMIC); + if (!tmp) { + mlx4_err(mdev, "failed to allocate multicast list\n"); + mlx4_en_clear_list(dev); + return; + } + memcpy(tmp, mclist, sizeof(struct dev_mc_list)); + tmp->next = NULL; + if (plist) + plist->next = tmp; + else + priv->mc_list = tmp; + plist = tmp; + } +} + + +static void mlx4_en_set_multicast(struct net_device *dev) +{ + struct mlx4_en_priv *priv = netdev_priv(dev); + + if (!priv->port_up) + return; + + queue_work(priv->mdev->workqueue, &priv->mcast_task); +} + +static void mlx4_en_do_set_multicast(struct work_struct *work) +{ + struct mlx4_en_priv *priv = container_of(work, struct mlx4_en_priv, + mcast_task); + struct mlx4_en_dev *mdev = priv->mdev; + struct net_device *dev = priv->dev; + struct dev_mc_list *mclist; + u64 mcast_addr = 0; + int err; + + mutex_lock(&mdev->state_lock); + if (!mdev->device_up) { + mlx4_dbg(HW, priv, "Card is not up, ignoring " + "multicast change.\n"); + goto out; + } + if (!priv->port_up) { + mlx4_dbg(HW, priv, "Port is down, ignoring " + "multicast change.\n"); + goto out; + } + + /* + * Promsicuous mode: disable all filters + */ + + if (dev->flags & IFF_PROMISC) { + if (!(priv->flags & MLX4_EN_FLAG_PROMISC)) { + if (netif_msg_rx_status(priv)) + mlx4_warn(mdev, "Port:%d entering promiscuous mode\n", + priv->port); + priv->flags |= MLX4_EN_FLAG_PROMISC; + + /* Enable promiscouos mode */ + err = mlx4_SET_PORT_qpn_calc(mdev->dev, priv->port, + priv->base_qpn, 1); + if (err) + mlx4_err(mdev, "Failed enabling " + "promiscous mode\n"); + + /* Disable port multicast filter (unconditionally) */ + err = mlx4_SET_MCAST_FLTR(mdev->dev, priv->port, 0, + 0, MLX4_MCAST_DISABLE); + if (err) + mlx4_err(mdev, "Failed disabling " + "multicast filter\n"); + + /* Disable port VLAN filter */ + err = mlx4_SET_VLAN_FLTR(mdev->dev, priv->port, NULL); + if (err) + mlx4_err(mdev, "Failed disabling " + "VLAN filter\n"); + } + goto out; + } + + /* + * Not in promiscous mode + */ + + if (priv->flags & MLX4_EN_FLAG_PROMISC) { + if (netif_msg_rx_status(priv)) + mlx4_warn(mdev, "Port:%d leaving promiscuous mode\n", + priv->port); + priv->flags &= ~MLX4_EN_FLAG_PROMISC; + + /* Disable promiscouos mode */ + err = mlx4_SET_PORT_qpn_calc(mdev->dev, priv->port, + priv->base_qpn, 0); + if (err) + mlx4_err(mdev, "Failed disabling promiscous mode\n"); + + /* Enable port VLAN filter */ + err = mlx4_SET_VLAN_FLTR(mdev->dev, priv->port, priv->vlgrp); + if (err) + mlx4_err(mdev, "Failed enabling VLAN filter\n"); + } + + /* Enable/disable the multicast filter according to IFF_ALLMULTI */ + if (dev->flags & IFF_ALLMULTI) { + err = mlx4_SET_MCAST_FLTR(mdev->dev, priv->port, 0, + 0, MLX4_MCAST_DISABLE); + if (err) + mlx4_err(mdev, "Failed disabling multicast filter\n"); + } else { + err = mlx4_SET_MCAST_FLTR(mdev->dev, priv->port, 0, + 0, MLX4_MCAST_DISABLE); + if (err) + mlx4_err(mdev, "Failed disabling multicast filter\n"); + + /* Flush mcast filter and init it with broadcast address */ + mlx4_SET_MCAST_FLTR(mdev->dev, priv->port, ETH_BCAST, + 1, MLX4_MCAST_CONFIG); + + /* Update multicast list - we cache all addresses so they won't + * change while HW is updated holding the command semaphor */ + netif_tx_lock_bh(dev); + mlx4_en_cache_mclist(dev); + netif_tx_unlock_bh(dev); + for (mclist = priv->mc_list; mclist; mclist = mclist->next) { + mcast_addr = mlx4_en_mac_to_u64(mclist->dmi_addr); + mlx4_SET_MCAST_FLTR(mdev->dev, priv->port, + mcast_addr, 0, MLX4_MCAST_CONFIG); + } + err = mlx4_SET_MCAST_FLTR(mdev->dev, priv->port, 0, + 0, MLX4_MCAST_ENABLE); + if (err) + mlx4_err(mdev, "Failed enabling multicast filter\n"); + + mlx4_en_clear_list(dev); + } +out: + mutex_unlock(&mdev->state_lock); +} + +#ifdef CONFIG_NET_POLL_CONTROLLER +static void mlx4_en_netpoll(struct net_device *dev) +{ + struct mlx4_en_priv *priv = netdev_priv(dev); + struct mlx4_en_cq *cq; + unsigned long flags; + int i; + + for (i = 0; i < priv->rx_ring_num; i++) { + cq = &priv->rx_cq[i]; + spin_lock_irqsave(&cq->lock, flags); + napi_synchronize(&cq->napi); + mlx4_en_process_rx_cq(dev, cq, 0); + spin_unlock_irqrestore(&cq->lock, flags); + } +} +#endif + +static void mlx4_en_tx_timeout(struct net_device *dev) +{ + struct mlx4_en_priv *priv = netdev_priv(dev); + struct mlx4_en_dev *mdev = priv->mdev; + + if (netif_msg_timer(priv)) + mlx4_warn(mdev, "Tx timeout called on port:%d\n", priv->port); + + if (netif_carrier_ok(dev)) { + priv->port_stats.tx_timeout++; + mlx4_dbg(DRV, priv, "Scheduling watchdog\n"); + queue_work(mdev->workqueue, &priv->watchdog_task); + } +} + + +static struct net_device_stats *mlx4_en_get_stats(struct net_device *dev) +{ + struct mlx4_en_priv *priv = netdev_priv(dev); + + spin_lock_bh(&priv->stats_lock); + memcpy(&priv->ret_stats, &priv->stats, sizeof(priv->stats)); + spin_unlock_bh(&priv->stats_lock); + + return &priv->ret_stats; +} + +static void mlx4_en_set_default_moderation(struct mlx4_en_priv *priv) +{ + struct mlx4_en_dev *mdev = priv->mdev; + struct mlx4_en_cq *cq; + int i; + + /* If we haven't received a specific coalescing setting + * (module param), we set the moderation paramters as follows: + * - moder_cnt is set to the number of mtu sized packets to + * satisfy our coelsing target. + * - moder_time is set to a fixed value. + */ + priv->rx_frames = (mdev->profile.rx_moder_cnt == + MLX4_EN_AUTO_CONF) ? + MLX4_EN_RX_COAL_TARGET / + priv->dev->mtu + 1 : + mdev->profile.rx_moder_cnt; + priv->rx_usecs = (mdev->profile.rx_moder_time == + MLX4_EN_AUTO_CONF) ? + MLX4_EN_RX_COAL_TIME : + mdev->profile.rx_moder_time; + mlx4_dbg(INTR, priv, "Default coalesing params for mtu:%d - " + "rx_frames:%d rx_usecs:%d\n", + priv->dev->mtu, priv->rx_frames, priv->rx_usecs); + + /* Setup cq moderation params */ + for (i = 0; i < priv->rx_ring_num; i++) { + cq = &priv->rx_cq[i]; + cq->moder_cnt = priv->rx_frames; + cq->moder_time = priv->rx_usecs; + } + + for (i = 0; i < priv->tx_ring_num; i++) { + cq = &priv->tx_cq[i]; + cq->moder_cnt = MLX4_EN_TX_COAL_PKTS; + cq->moder_time = MLX4_EN_TX_COAL_TIME; + } + + /* Reset auto-moderation params */ + priv->pkt_rate_low = MLX4_EN_RX_RATE_LOW; + priv->rx_usecs_low = MLX4_EN_RX_COAL_TIME_LOW; + priv->pkt_rate_high = MLX4_EN_RX_RATE_HIGH; + priv->rx_usecs_high = MLX4_EN_RX_COAL_TIME_HIGH; + priv->sample_interval = MLX4_EN_SAMPLE_INTERVAL; + priv->adaptive_rx_coal = mdev->profile.auto_moder; + priv->last_moder_time = MLX4_EN_AUTO_CONF; + priv->last_moder_jiffies = 0; + priv->last_moder_packets = 0; + priv->last_moder_tx_packets = 0; + priv->last_moder_bytes = 0; +} + +static void mlx4_en_auto_moderation(struct mlx4_en_priv *priv) +{ + unsigned long period = (unsigned long) (jiffies - priv->last_moder_jiffies); + struct mlx4_en_dev *mdev = priv->mdev; + struct mlx4_en_cq *cq; + unsigned long packets; + unsigned long rate; + unsigned long avg_pkt_size; + unsigned long rx_packets; + unsigned long rx_bytes; + unsigned long tx_packets; + unsigned long tx_pkt_diff; + unsigned long rx_pkt_diff; + int moder_time; + int i, err; + + if (!priv->adaptive_rx_coal || period < priv->sample_interval * HZ) + return; + + spin_lock_bh(&priv->stats_lock); + rx_packets = priv->stats.rx_packets; + rx_bytes = priv->stats.rx_bytes; + tx_packets = priv->stats.tx_packets; + spin_unlock_bh(&priv->stats_lock); + + if (!priv->last_moder_jiffies || !period) + goto out; + + tx_pkt_diff = ((unsigned long) (tx_packets - + priv->last_moder_tx_packets)); + rx_pkt_diff = ((unsigned long) (rx_packets - + priv->last_moder_packets)); + packets = max(tx_pkt_diff, rx_pkt_diff); + rate = packets * HZ / period; + avg_pkt_size = packets ? ((unsigned long) (rx_bytes - + priv->last_moder_bytes)) / packets : 0; + + /* Apply auto-moderation only when packet rate exceeds a rate that + * it matters */ + if (rate > MLX4_EN_RX_RATE_THRESH) { + /* If tx and rx packet rates are not balanced, assume that + * traffic is mainly BW bound and apply maximum moderation. + * Otherwise, moderate according to packet rate */ + if (2 * tx_pkt_diff > 3 * rx_pkt_diff || + 2 * rx_pkt_diff > 3 * tx_pkt_diff) { + moder_time = priv->rx_usecs_high; + } else { + if (rate < priv->pkt_rate_low) + moder_time = priv->rx_usecs_low; + else if (rate > priv->pkt_rate_high) + moder_time = priv->rx_usecs_high; + else + moder_time = (rate - priv->pkt_rate_low) * + (priv->rx_usecs_high - priv->rx_usecs_low) / + (priv->pkt_rate_high - priv->pkt_rate_low) + + priv->rx_usecs_low; + } + } else { + /* When packet rate is low, use default moderation rather than + * 0 to prevent interrupt storms if traffic suddenly increases */ + moder_time = priv->rx_usecs; + } + + mlx4_dbg(INTR, priv, "tx rate:%lu rx_rate:%lu\n", + tx_pkt_diff * HZ / period, rx_pkt_diff * HZ / period); + + mlx4_dbg(INTR, priv, "Rx moder_time changed from:%d to %d period:%lu " + "[jiff] packets:%lu avg_pkt_size:%lu rate:%lu [p/s])\n", + priv->last_moder_time, moder_time, period, packets, + avg_pkt_size, rate); + + if (moder_time != priv->last_moder_time) { + priv->last_moder_time = moder_time; + for (i = 0; i < priv->rx_ring_num; i++) { + cq = &priv->rx_cq[i]; + cq->moder_time = moder_time; + err = mlx4_en_set_cq_moder(priv, cq); + if (err) { + mlx4_err(mdev, "Failed modifying moderation for cq:%d " + "on port:%d\n", i, priv->port); + break; + } + } + } + +out: + priv->last_moder_packets = rx_packets; + priv->last_moder_tx_packets = tx_packets; + priv->last_moder_bytes = rx_bytes; + priv->last_moder_jiffies = jiffies; +} + +static void mlx4_en_do_get_stats(struct work_struct *work) +{ + struct delayed_work *delay = container_of(work, struct delayed_work, work); + struct mlx4_en_priv *priv = container_of(delay, struct mlx4_en_priv, + stats_task); + struct mlx4_en_dev *mdev = priv->mdev; + int err; + + err = mlx4_en_DUMP_ETH_STATS(mdev, priv->port, 0); + if (err) + mlx4_dbg(HW, priv, "Could not update stats for " + "port:%d\n", priv->port); + + mutex_lock(&mdev->state_lock); + if (mdev->device_up) { + if (priv->port_up) + mlx4_en_auto_moderation(priv); + + queue_delayed_work(mdev->workqueue, &priv->stats_task, STATS_DELAY); + } + mutex_unlock(&mdev->state_lock); +} + +static void mlx4_en_linkstate(struct work_struct *work) +{ + struct mlx4_en_priv *priv = container_of(work, struct mlx4_en_priv, + linkstate_task); + struct mlx4_en_dev *mdev = priv->mdev; + int linkstate = priv->link_state; + + mutex_lock(&mdev->state_lock); + /* If observable port state changed set carrier state and + * report to system log */ + if (priv->last_link_state != linkstate) { + if (linkstate == MLX4_DEV_EVENT_PORT_DOWN) { + if (netif_msg_link(priv)) + mlx4_info(mdev, "Port %d - link down\n", priv->port); + netif_carrier_off(priv->dev); + } else { + if (netif_msg_link(priv)) + mlx4_info(mdev, "Port %d - link up\n", priv->port); + netif_carrier_on(priv->dev); + } + } + priv->last_link_state = linkstate; + mutex_unlock(&mdev->state_lock); +} + + +static int mlx4_en_start_port(struct net_device *dev) +{ + struct mlx4_en_priv *priv = netdev_priv(dev); + struct mlx4_en_dev *mdev = priv->mdev; + struct mlx4_en_cq *cq; + struct mlx4_en_tx_ring *tx_ring; + struct mlx4_en_rx_ring *rx_ring; + int rx_index = 0; + int tx_index = 0; + u16 stride; + int err = 0; + int i; + int j; + + if (priv->port_up) { + mlx4_dbg(DRV, priv, "start port called while port already up\n"); + return 0; + } + + /* Calculate Rx buf size */ + dev->mtu = min(dev->mtu, priv->max_mtu); + mlx4_en_calc_rx_buf(dev); + mlx4_dbg(DRV, priv, "Rx buf size:%d\n", priv->rx_skb_size); + stride = roundup_pow_of_two(sizeof(struct mlx4_en_rx_desc) + + DS_SIZE * priv->num_frags); + /* Configure rx cq's and rings */ + for (i = 0; i < priv->rx_ring_num; i++) { + cq = &priv->rx_cq[i]; + rx_ring = &priv->rx_ring[i]; + + err = mlx4_en_activate_cq(priv, cq); + if (err) { + mlx4_err(mdev, "Failed activating Rx CQ\n"); + goto rx_err; + } + for (j = 0; j < cq->size; j++) + cq->buf[j].owner_sr_opcode = MLX4_CQE_OWNER_MASK; + err = mlx4_en_set_cq_moder(priv, cq); + if (err) { + mlx4_err(mdev, "Failed setting cq moderation parameters"); + mlx4_en_deactivate_cq(priv, cq); + goto cq_err; + } + mlx4_en_arm_cq(priv, cq); + + ++rx_index; + } + + err = mlx4_en_activate_rx_rings(priv); + if (err) { + mlx4_err(mdev, "Failed to activate RX rings\n"); + goto cq_err; + } + + err = mlx4_en_config_rss_steer(priv); + if (err) { + mlx4_err(mdev, "Failed configuring rss steering\n"); + goto rx_err; + } + + /* Configure tx cq's and rings */ + for (i = 0; i < priv->tx_ring_num; i++) { + /* Configure cq */ + cq = &priv->tx_cq[i]; + err = mlx4_en_activate_cq(priv, cq); + if (err) { + mlx4_err(mdev, "Failed allocating Tx CQ\n"); + goto tx_err; + } + err = mlx4_en_set_cq_moder(priv, cq); + if (err) { + mlx4_err(mdev, "Failed setting cq moderation parameters"); + mlx4_en_deactivate_cq(priv, cq); + goto tx_err; + } + mlx4_dbg(DRV, priv, "Resetting index of collapsed CQ:%d to -1\n", i); + cq->buf->wqe_index = cpu_to_be16(0xffff); + + /* Configure ring */ + tx_ring = &priv->tx_ring[i]; + err = mlx4_en_activate_tx_ring(priv, tx_ring, cq->mcq.cqn, + priv->rx_ring[0].srq.srqn); + if (err) { + mlx4_err(mdev, "Failed allocating Tx ring\n"); + mlx4_en_deactivate_cq(priv, cq); + goto tx_err; + } + /* Set initial ownership of all Tx TXBBs to SW (1) */ + for (j = 0; j < tx_ring->buf_size; j += STAMP_STRIDE) + *((u32 *) (tx_ring->buf + j)) = 0xffffffff; + ++tx_index; + } + + /* Configure port */ + err = mlx4_SET_PORT_general(mdev->dev, priv->port, + priv->rx_skb_size + ETH_FCS_LEN, + mdev->profile.tx_pause, + mdev->profile.tx_ppp, + mdev->profile.rx_pause, + mdev->profile.rx_ppp); + if (err) { + mlx4_err(mdev, "Failed setting port general configurations" + " for port %d, with error %d\n", priv->port, err); + goto tx_err; + } + /* Set default qp number */ + err = mlx4_SET_PORT_qpn_calc(mdev->dev, priv->port, priv->base_qpn, 0); + if (err) { + mlx4_err(mdev, "Failed setting default qp numbers\n"); + goto tx_err; + } + /* Set port mac number */ + mlx4_dbg(DRV, priv, "Setting mac for port %d\n", priv->port); + err = mlx4_register_mac(mdev->dev, priv->port, + priv->mac, &priv->mac_index); + if (err) { + mlx4_err(mdev, "Failed setting port mac\n"); + goto tx_err; + } + + /* Init port */ + mlx4_dbg(HW, priv, "Initializing port\n"); + err = mlx4_INIT_PORT(mdev->dev, priv->port); + if (err) { + mlx4_err(mdev, "Failed Initializing port\n"); + goto mac_err; + } + + /* Schedule multicast task to populate multicast list */ + queue_work(mdev->workqueue, &priv->mcast_task); + + priv->port_up = true; + netif_start_queue(dev); + return 0; + +mac_err: + mlx4_unregister_mac(mdev->dev, priv->port, priv->mac_index); +tx_err: + while (tx_index--) { + mlx4_en_deactivate_tx_ring(priv, &priv->tx_ring[tx_index]); + mlx4_en_deactivate_cq(priv, &priv->tx_cq[tx_index]); + } + + mlx4_en_release_rss_steer(priv); +rx_err: + for (i = 0; i < priv->rx_ring_num; i++) + mlx4_en_deactivate_rx_ring(priv, &priv->rx_ring[rx_index]); +cq_err: + while (rx_index--) + mlx4_en_deactivate_cq(priv, &priv->rx_cq[rx_index]); + + return err; /* need to close devices */ +} + + +static void mlx4_en_stop_port(struct net_device *dev) +{ + struct mlx4_en_priv *priv = netdev_priv(dev); + struct mlx4_en_dev *mdev = priv->mdev; + int i; + + if (!priv->port_up) { + mlx4_dbg(DRV, priv, "stop port (%d) called while port already down\n", + priv->port); + return; + } + netif_stop_queue(dev); + + /* Synchronize with tx routine */ + netif_tx_lock_bh(dev); + priv->port_up = false; + netif_tx_unlock_bh(dev); + + /* close port*/ + mlx4_CLOSE_PORT(mdev->dev, priv->port); + + /* Unregister Mac address for the port */ + mlx4_unregister_mac(mdev->dev, priv->port, priv->mac_index); + + /* Free TX Rings */ + for (i = 0; i < priv->tx_ring_num; i++) { + mlx4_en_deactivate_tx_ring(priv, &priv->tx_ring[i]); + mlx4_en_deactivate_cq(priv, &priv->tx_cq[i]); + } + msleep(10); + + for (i = 0; i < priv->tx_ring_num; i++) + mlx4_en_free_tx_buf(dev, &priv->tx_ring[i]); + + /* Free RSS qps */ + mlx4_en_release_rss_steer(priv); + + /* Free RX Rings */ + for (i = 0; i < priv->rx_ring_num; i++) { + mlx4_en_deactivate_rx_ring(priv, &priv->rx_ring[i]); + while (test_bit(NAPI_STATE_SCHED, &priv->rx_cq[i].napi.state)) + msleep(1); + mlx4_en_deactivate_cq(priv, &priv->rx_cq[i]); + } +} + +static void mlx4_en_restart(struct work_struct *work) +{ + struct mlx4_en_priv *priv = container_of(work, struct mlx4_en_priv, + watchdog_task); + struct mlx4_en_dev *mdev = priv->mdev; + struct net_device *dev = priv->dev; + + mlx4_dbg(DRV, priv, "Watchdog task called for port %d\n", priv->port); + mlx4_en_stop_port(dev); + if (mlx4_en_start_port(dev)) + mlx4_err(mdev, "Failed restarting port %d\n", priv->port); +} + + +static int mlx4_en_open(struct net_device *dev) +{ + struct mlx4_en_priv *priv = netdev_priv(dev); + struct mlx4_en_dev *mdev = priv->mdev; + int i; + int err = 0; + + mutex_lock(&mdev->state_lock); + + if (!mdev->device_up) { + mlx4_err(mdev, "Cannot open - device down/disabled\n"); + err = -EBUSY; + goto out; + } + + /* Reset HW statistics and performance counters */ + if (mlx4_en_DUMP_ETH_STATS(mdev, priv->port, 1)) + mlx4_dbg(HW, priv, "Failed dumping statistics\n"); + + memset(&priv->stats, 0, sizeof(priv->stats)); + memset(&priv->pstats, 0, sizeof(priv->pstats)); + + for (i = 0; i < priv->tx_ring_num; i++) { + priv->tx_ring[i].bytes = 0; + priv->tx_ring[i].packets = 0; + } + for (i = 0; i < priv->rx_ring_num; i++) { + priv->rx_ring[i].bytes = 0; + priv->rx_ring[i].packets = 0; + } + + mlx4_en_set_default_moderation(priv); + err = mlx4_en_start_port(dev); + if (err) + mlx4_err(mdev, "Failed starting port:%d\n", priv->port); + +out: + mutex_unlock(&mdev->state_lock); + return err; +} + + +static int mlx4_en_close(struct net_device *dev) +{ + struct mlx4_en_priv *priv = netdev_priv(dev); + struct mlx4_en_dev *mdev = priv->mdev; + + if (netif_msg_ifdown(priv)) + mlx4_info(mdev, "Close called for port:%d\n", priv->port); + + mutex_lock(&mdev->state_lock); + + mlx4_en_stop_port(dev); + netif_carrier_off(dev); + + mutex_unlock(&mdev->state_lock); + return 0; +} + +static void mlx4_en_free_resources(struct mlx4_en_priv *priv) +{ + int i; + + for (i = 0; i < priv->tx_ring_num; i++) { + if (priv->tx_ring[i].tx_info) + mlx4_en_destroy_tx_ring(priv, &priv->tx_ring[i]); + if (priv->tx_cq[i].buf) + mlx4_en_destroy_cq(priv, &priv->tx_cq[i]); + } + + for (i = 0; i < priv->rx_ring_num; i++) { + if (priv->rx_ring[i].rx_info) + mlx4_en_destroy_rx_ring(priv, &priv->rx_ring[i]); + if (priv->rx_cq[i].buf) + mlx4_en_destroy_cq(priv, &priv->rx_cq[i]); + } +} + +static int mlx4_en_alloc_resources(struct mlx4_en_priv *priv) +{ + struct mlx4_en_dev *mdev = priv->mdev; + struct mlx4_en_port_profile *prof = priv->prof; + int i; + + /* Create tx Rings */ + for (i = 0; i < priv->tx_ring_num; i++) { + if (mlx4_en_create_cq(priv, &priv->tx_cq[i], + prof->tx_ring_size, i, TX)) + goto err; + + if (mlx4_en_create_tx_ring(priv, &priv->tx_ring[i], + prof->tx_ring_size, TXBB_SIZE)) + goto err; + } + + /* Create rx Rings */ + for (i = 0; i < priv->rx_ring_num; i++) { + if (mlx4_en_create_cq(priv, &priv->rx_cq[i], + prof->rx_ring_size, i, RX)) + goto err; + + if (mlx4_en_create_rx_ring(priv, &priv->rx_ring[i], + prof->rx_ring_size, priv->stride)) + goto err; + } + + return 0; + +err: + mlx4_err(mdev, "Failed to allocate NIC resources\n"); + return -ENOMEM; +} + + +void mlx4_en_destroy_netdev(struct net_device *dev) +{ + struct mlx4_en_priv *priv = netdev_priv(dev); + struct mlx4_en_dev *mdev = priv->mdev; + + mlx4_dbg(DRV, priv, "Destroying netdev on port:%d\n", priv->port); + + /* Unregister device - this will close the port if it was up */ + if (priv->registered) + unregister_netdev(dev); + + if (priv->allocated) + mlx4_free_hwq_res(mdev->dev, &priv->res, MLX4_EN_PAGE_SIZE); + + cancel_delayed_work(&priv->stats_task); + cancel_delayed_work(&priv->refill_task); + /* flush any pending task for this netdev */ + flush_workqueue(mdev->workqueue); + + /* Detach the netdev so tasks would not attempt to access it */ + mutex_lock(&mdev->state_lock); + mdev->pndev[priv->port] = NULL; + mutex_unlock(&mdev->state_lock); + + mlx4_en_free_resources(priv); + free_netdev(dev); +} + +static int mlx4_en_change_mtu(struct net_device *dev, int new_mtu) +{ + struct mlx4_en_priv *priv = netdev_priv(dev); + struct mlx4_en_dev *mdev = priv->mdev; + int err = 0; + + mlx4_dbg(DRV, priv, "Change MTU called - current:%d new:%d\n", + dev->mtu, new_mtu); + + if ((new_mtu < MLX4_EN_MIN_MTU) || (new_mtu > priv->max_mtu)) { + mlx4_err(mdev, "Bad MTU size:%d.\n", new_mtu); + return -EPERM; + } + dev->mtu = new_mtu; + + if (netif_running(dev)) { + mutex_lock(&mdev->state_lock); + if (!mdev->device_up) { + /* NIC is probably restarting - let watchdog task reset + * the port */ + mlx4_dbg(DRV, priv, "Change MTU called with card down!?\n"); + } else { + mlx4_en_stop_port(dev); + mlx4_en_set_default_moderation(priv); + err = mlx4_en_start_port(dev); + if (err) { + mlx4_err(mdev, "Failed restarting port:%d\n", + priv->port); + queue_work(mdev->workqueue, &priv->watchdog_task); + } + } + mutex_unlock(&mdev->state_lock); + } + return 0; +} + +int mlx4_en_init_netdev(struct mlx4_en_dev *mdev, int port, + struct mlx4_en_port_profile *prof) +{ + struct net_device *dev; + struct mlx4_en_priv *priv; + int i; + int err; + + dev = alloc_etherdev(sizeof(struct mlx4_en_priv)); + if (dev == NULL) { + mlx4_err(mdev, "Net device allocation failed\n"); + return -ENOMEM; + } + + SET_NETDEV_DEV(dev, &mdev->dev->pdev->dev); + + /* + * Initialize driver private data + */ + + priv = netdev_priv(dev); + memset(priv, 0, sizeof(struct mlx4_en_priv)); + priv->dev = dev; + priv->mdev = mdev; + priv->prof = prof; + priv->port = port; + priv->port_up = false; + priv->rx_csum = 1; + priv->flags = prof->flags; + priv->tx_ring_num = prof->tx_ring_num; + priv->rx_ring_num = prof->rx_ring_num; + priv->mc_list = NULL; + priv->mac_index = -1; + priv->msg_enable = MLX4_EN_MSG_LEVEL; + spin_lock_init(&priv->stats_lock); + INIT_WORK(&priv->mcast_task, mlx4_en_do_set_multicast); + INIT_WORK(&priv->mac_task, mlx4_en_do_set_mac); + INIT_DELAYED_WORK(&priv->refill_task, mlx4_en_rx_refill); + INIT_WORK(&priv->watchdog_task, mlx4_en_restart); + INIT_WORK(&priv->linkstate_task, mlx4_en_linkstate); + INIT_DELAYED_WORK(&priv->stats_task, mlx4_en_do_get_stats); + + /* Query for default mac and max mtu */ + priv->max_mtu = mdev->dev->caps.eth_mtu_cap[priv->port]; + priv->mac = mdev->dev->caps.def_mac[priv->port]; + if (ILLEGAL_MAC(priv->mac)) { + mlx4_err(mdev, "Port: %d, invalid mac burned: 0x%llx, quiting\n", + priv->port, priv->mac); + err = -EINVAL; + goto out; + } + + priv->stride = roundup_pow_of_two(sizeof(struct mlx4_en_rx_desc) + + DS_SIZE * MLX4_EN_MAX_RX_FRAGS); + err = mlx4_en_alloc_resources(priv); + if (err) + goto out; + + /* Populate Rx default RSS mappings */ + mlx4_en_set_default_rss_map(priv, &priv->rss_map, priv->rx_ring_num * + RSS_FACTOR, priv->rx_ring_num); + /* Allocate page for receive rings */ + err = mlx4_alloc_hwq_res(mdev->dev, &priv->res, + MLX4_EN_PAGE_SIZE, MLX4_EN_PAGE_SIZE); + if (err) { + mlx4_err(mdev, "Failed to allocate page for rx qps\n"); + goto out; + } + priv->allocated = 1; + + /* Populate Tx priority mappings */ + mlx4_en_set_prio_map(priv, priv->tx_prio_map, prof->tx_ring_num); + + /* + * Initialize netdev entry points + */ + + dev->open = &mlx4_en_open; + dev->stop = &mlx4_en_close; + dev->hard_start_xmit = &mlx4_en_xmit; + dev->get_stats = &mlx4_en_get_stats; + dev->set_multicast_list = &mlx4_en_set_multicast; + dev->set_mac_address = &mlx4_en_set_mac; + dev->change_mtu = &mlx4_en_change_mtu; + dev->tx_timeout = &mlx4_en_tx_timeout; + dev->watchdog_timeo = MLX4_EN_WATCHDOG_TIMEOUT; + dev->vlan_rx_register = mlx4_en_vlan_rx_register; + dev->vlan_rx_add_vid = mlx4_en_vlan_rx_add_vid; + dev->vlan_rx_kill_vid = mlx4_en_vlan_rx_kill_vid; +#ifdef CONFIG_NET_POLL_CONTROLLER + dev->poll_controller = mlx4_en_netpoll; +#endif + SET_ETHTOOL_OPS(dev, &mlx4_en_ethtool_ops); + + /* Set defualt MAC */ + dev->addr_len = ETH_ALEN; + for (i = 0; i < ETH_ALEN; i++) + dev->dev_addr[ETH_ALEN - 1 - i] = + (u8) (priv->mac >> (8 * i)); + + /* + * Set driver features + */ + dev->features |= NETIF_F_SG; + dev->features |= NETIF_F_HW_CSUM; + dev->features |= NETIF_F_HIGHDMA; + dev->features |= NETIF_F_HW_VLAN_TX | + NETIF_F_HW_VLAN_RX | + NETIF_F_HW_VLAN_FILTER; + if (mdev->profile.num_lro) + dev->features |= NETIF_F_LRO; + if (mdev->LSO_support) { + dev->features |= NETIF_F_TSO; + dev->features |= NETIF_F_TSO6; + } + + mdev->pndev[port] = dev; + + netif_carrier_off(dev); + err = register_netdev(dev); + if (err) { + mlx4_err(mdev, "Netdev registration failed\n"); + goto out; + } + priv->registered = 1; + queue_delayed_work(mdev->workqueue, &priv->stats_task, STATS_DELAY); + return 0; + +out: + mlx4_en_destroy_netdev(dev); + return err; +} + diff --git a/drivers/net/mlx4/en_params.c b/drivers/net/mlx4/en_params.c new file mode 100644 index 000000000000..c2e69b1bcd0a --- /dev/null +++ b/drivers/net/mlx4/en_params.c @@ -0,0 +1,480 @@ +/* + * Copyright (c) 2007 Mellanox Technologies. All rights reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the + * OpenIB.org BSD license below: + * + * Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * - Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * + * - Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + * + */ + +#include <linux/kernel.h> +#include <linux/ethtool.h> +#include <linux/netdevice.h> + +#include "mlx4_en.h" +#include "en_port.h" + +#define MLX4_EN_PARM_INT(X, def_val, desc) \ + static unsigned int X = def_val;\ + module_param(X , uint, 0444); \ + MODULE_PARM_DESC(X, desc); + + +/* + * Device scope module parameters + */ + + +/* Use a XOR rathern than Toeplitz hash function for RSS */ +MLX4_EN_PARM_INT(rss_xor, 0, "Use XOR hash function for RSS"); + +/* RSS hash type mask - default to <saddr, daddr, sport, dport> */ +MLX4_EN_PARM_INT(rss_mask, 0xf, "RSS hash type bitmask"); + +/* Number of LRO sessions per Rx ring (rounded up to a power of two) */ +MLX4_EN_PARM_INT(num_lro, MLX4_EN_MAX_LRO_DESCRIPTORS, + "Number of LRO sessions per ring or disabled (0)"); + +/* Priority pausing */ +MLX4_EN_PARM_INT(pptx, MLX4_EN_DEF_TX_PAUSE, + "Pause policy on TX: 0 never generate pause frames " + "1 generate pause frames according to RX buffer threshold"); +MLX4_EN_PARM_INT(pprx, MLX4_EN_DEF_RX_PAUSE, + "Pause policy on RX: 0 ignore received pause frames " + "1 respect received pause frames"); +MLX4_EN_PARM_INT(pfctx, 0, "Priority based Flow Control policy on TX[7:0]." + " Per priority bit mask"); +MLX4_EN_PARM_INT(pfcrx, 0, "Priority based Flow Control policy on RX[7:0]." + " Per priority bit mask"); + +/* Interrupt moderation tunning */ +MLX4_EN_PARM_INT(rx_moder_cnt, MLX4_EN_AUTO_CONF, + "Max coalesced descriptors for Rx interrupt moderation"); +MLX4_EN_PARM_INT(rx_moder_time, MLX4_EN_AUTO_CONF, + "Timeout following last packet for Rx interrupt moderation"); +MLX4_EN_PARM_INT(auto_moder, 1, "Enable dynamic interrupt moderation"); + +MLX4_EN_PARM_INT(rx_ring_num1, 0, "Number or Rx rings for port 1 (0 = #cores)"); +MLX4_EN_PARM_INT(rx_ring_num2, 0, "Number or Rx rings for port 2 (0 = #cores)"); + +MLX4_EN_PARM_INT(tx_ring_size1, MLX4_EN_AUTO_CONF, "Tx ring size for port 1"); +MLX4_EN_PARM_INT(tx_ring_size2, MLX4_EN_AUTO_CONF, "Tx ring size for port 2"); +MLX4_EN_PARM_INT(rx_ring_size1, MLX4_EN_AUTO_CONF, "Rx ring size for port 1"); +MLX4_EN_PARM_INT(rx_ring_size2, MLX4_EN_AUTO_CONF, "Rx ring size for port 2"); + + +int mlx4_en_get_profile(struct mlx4_en_dev *mdev) +{ + struct mlx4_en_profile *params = &mdev->profile; + + params->rx_moder_cnt = min_t(int, rx_moder_cnt, MLX4_EN_AUTO_CONF); + params->rx_moder_time = min_t(int, rx_moder_time, MLX4_EN_AUTO_CONF); + params->auto_moder = auto_moder; + params->rss_xor = (rss_xor != 0); + params->rss_mask = rss_mask & 0x1f; + params->num_lro = min_t(int, num_lro , MLX4_EN_MAX_LRO_DESCRIPTORS); + params->rx_pause = pprx; + params->rx_ppp = pfcrx; + params->tx_pause = pptx; + params->tx_ppp = pfctx; + if (params->rx_ppp || params->tx_ppp) { + params->prof[1].tx_ring_num = MLX4_EN_TX_RING_NUM; + params->prof[2].tx_ring_num = MLX4_EN_TX_RING_NUM; + } else { + params->prof[1].tx_ring_num = 1; + params->prof[2].tx_ring_num = 1; + } + params->prof[1].rx_ring_num = min_t(int, rx_ring_num1, MAX_RX_RINGS); + params->prof[2].rx_ring_num = min_t(int, rx_ring_num2, MAX_RX_RINGS); + + if (tx_ring_size1 == MLX4_EN_AUTO_CONF) + tx_ring_size1 = MLX4_EN_DEF_TX_RING_SIZE; + params->prof[1].tx_ring_size = + (tx_ring_size1 < MLX4_EN_MIN_TX_SIZE) ? + MLX4_EN_MIN_TX_SIZE : roundup_pow_of_two(tx_ring_size1); + + if (tx_ring_size2 == MLX4_EN_AUTO_CONF) + tx_ring_size2 = MLX4_EN_DEF_TX_RING_SIZE; + params->prof[2].tx_ring_size = + (tx_ring_size2 < MLX4_EN_MIN_TX_SIZE) ? + MLX4_EN_MIN_TX_SIZE : roundup_pow_of_two(tx_ring_size2); + + if (rx_ring_size1 == MLX4_EN_AUTO_CONF) + rx_ring_size1 = MLX4_EN_DEF_RX_RING_SIZE; + params->prof[1].rx_ring_size = + (rx_ring_size1 < MLX4_EN_MIN_RX_SIZE) ? + MLX4_EN_MIN_RX_SIZE : roundup_pow_of_two(rx_ring_size1); + + if (rx_ring_size2 == MLX4_EN_AUTO_CONF) + rx_ring_size2 = MLX4_EN_DEF_RX_RING_SIZE; + params->prof[2].rx_ring_size = + (rx_ring_size2 < MLX4_EN_MIN_RX_SIZE) ? + MLX4_EN_MIN_RX_SIZE : roundup_pow_of_two(rx_ring_size2); + return 0; +} + + +/* + * Ethtool support + */ + +static void mlx4_en_update_lro_stats(struct mlx4_en_priv *priv) +{ + int i; + + priv->port_stats.lro_aggregated = 0; + priv->port_stats.lro_flushed = 0; + priv->port_stats.lro_no_desc = 0; + + for (i = 0; i < priv->rx_ring_num; i++) { + priv->port_stats.lro_aggregated += priv->rx_ring[i].lro.stats.aggregated; + priv->port_stats.lro_flushed += priv->rx_ring[i].lro.stats.flushed; + priv->port_stats.lro_no_desc += priv->rx_ring[i].lro.stats.no_desc; + } +} + +static void +mlx4_en_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *drvinfo) +{ + struct mlx4_en_priv *priv = netdev_priv(dev); + struct mlx4_en_dev *mdev = priv->mdev; + + sprintf(drvinfo->driver, DRV_NAME " (%s)", mdev->dev->board_id); + strncpy(drvinfo->version, DRV_VERSION " (" DRV_RELDATE ")", 32); + sprintf(drvinfo->fw_version, "%d.%d.%d", + (u16) (mdev->dev->caps.fw_ver >> 32), + (u16) ((mdev->dev->caps.fw_ver >> 16) & 0xffff), + (u16) (mdev->dev->caps.fw_ver & 0xffff)); + strncpy(drvinfo->bus_info, pci_name(mdev->dev->pdev), 32); + drvinfo->n_stats = 0; + drvinfo->regdump_len = 0; + drvinfo->eedump_len = 0; +} + +static u32 mlx4_en_get_tso(struct net_device *dev) +{ + return (dev->features & NETIF_F_TSO) != 0; +} + +static int mlx4_en_set_tso(struct net_device *dev, u32 data) +{ + struct mlx4_en_priv *priv = netdev_priv(dev); + + if (data) { + if (!priv->mdev->LSO_support) + return -EPERM; + dev->features |= (NETIF_F_TSO | NETIF_F_TSO6); + } else + dev->features &= ~(NETIF_F_TSO | NETIF_F_TSO6); + return 0; +} + +static u32 mlx4_en_get_rx_csum(struct net_device *dev) +{ + struct mlx4_en_priv *priv = netdev_priv(dev); + return priv->rx_csum; +} + +static int mlx4_en_set_rx_csum(struct net_device *dev, u32 data) +{ + struct mlx4_en_priv *priv = netdev_priv(dev); + priv->rx_csum = (data != 0); + return 0; +} + +static const char main_strings[][ETH_GSTRING_LEN] = { + "rx_packets", "tx_packets", "rx_bytes", "tx_bytes", "rx_errors", + "tx_errors", "rx_dropped", "tx_dropped", "multicast", "collisions", + "rx_length_errors", "rx_over_errors", "rx_crc_errors", + "rx_frame_errors", "rx_fifo_errors", "rx_missed_errors", + "tx_aborted_errors", "tx_carrier_errors", "tx_fifo_errors", + "tx_heartbeat_errors", "tx_window_errors", + + /* port statistics */ + "lro_aggregated", "lro_flushed", "lro_no_desc", "tso_packets", + "queue_stopped", "wake_queue", "tx_timeout", "rx_alloc_failed", + "rx_csum_good", "rx_csum_none", "tx_chksum_offload", + + /* packet statistics */ + "broadcast", "rx_prio_0", "rx_prio_1", "rx_prio_2", "rx_prio_3", + "rx_prio_4", "rx_prio_5", "rx_prio_6", "rx_prio_7", "tx_prio_0", + "tx_prio_1", "tx_prio_2", "tx_prio_3", "tx_prio_4", "tx_prio_5", + "tx_prio_6", "tx_prio_7", +}; +#define NUM_MAIN_STATS 21 +#define NUM_ALL_STATS (NUM_MAIN_STATS + NUM_PORT_STATS + NUM_PKT_STATS + NUM_PERF_STATS) + +static u32 mlx4_en_get_msglevel(struct net_device *dev) +{ + return ((struct mlx4_en_priv *) netdev_priv(dev))->msg_enable; +} + +static void mlx4_en_set_msglevel(struct net_device *dev, u32 val) +{ + ((struct mlx4_en_priv *) netdev_priv(dev))->msg_enable = val; +} + +static void mlx4_en_get_wol(struct net_device *netdev, + struct ethtool_wolinfo *wol) +{ + wol->supported = 0; + wol->wolopts = 0; + + return; +} + +static int mlx4_en_get_sset_count(struct net_device *dev, int sset) +{ + struct mlx4_en_priv *priv = netdev_priv(dev); + + if (sset != ETH_SS_STATS) + return -EOPNOTSUPP; + + return NUM_ALL_STATS + (priv->tx_ring_num + priv->rx_ring_num) * 2; +} + +static void mlx4_en_get_ethtool_stats(struct net_device *dev, + struct ethtool_stats *stats, uint64_t *data) +{ + struct mlx4_en_priv *priv = netdev_priv(dev); + int index = 0; + int i; + + spin_lock_bh(&priv->stats_lock); + + mlx4_en_update_lro_stats(priv); + + for (i = 0; i < NUM_MAIN_STATS; i++) + data[index++] = ((unsigned long *) &priv->stats)[i]; + for (i = 0; i < NUM_PORT_STATS; i++) + data[index++] = ((unsigned long *) &priv->port_stats)[i]; + for (i = 0; i < priv->tx_ring_num; i++) { + data[index++] = priv->tx_ring[i].packets; + data[index++] = priv->tx_ring[i].bytes; + } + for (i = 0; i < priv->rx_ring_num; i++) { + data[index++] = priv->rx_ring[i].packets; + data[index++] = priv->rx_ring[i].bytes; + } + for (i = 0; i < NUM_PKT_STATS; i++) + data[index++] = ((unsigned long *) &priv->pkstats)[i]; + spin_unlock_bh(&priv->stats_lock); + +} + +static void mlx4_en_get_strings(struct net_device *dev, + uint32_t stringset, uint8_t *data) +{ + struct mlx4_en_priv *priv = netdev_priv(dev); + int index = 0; + int i; + + if (stringset != ETH_SS_STATS) + return; + + /* Add main counters */ + for (i = 0; i < NUM_MAIN_STATS; i++) + strcpy(data + (index++) * ETH_GSTRING_LEN, main_strings[i]); + for (i = 0; i < NUM_PORT_STATS; i++) + strcpy(data + (index++) * ETH_GSTRING_LEN, + main_strings[i + NUM_MAIN_STATS]); + for (i = 0; i < priv->tx_ring_num; i++) { + sprintf(data + (index++) * ETH_GSTRING_LEN, + "tx%d_packets", i); + sprintf(data + (index++) * ETH_GSTRING_LEN, + "tx%d_bytes", i); + } + for (i = 0; i < priv->rx_ring_num; i++) { + sprintf(data + (index++) * ETH_GSTRING_LEN, + "rx%d_packets", i); + sprintf(data + (index++) * ETH_GSTRING_LEN, + "rx%d_bytes", i); + } + for (i = 0; i < NUM_PKT_STATS; i++) + strcpy(data + (index++) * ETH_GSTRING_LEN, + main_strings[i + NUM_MAIN_STATS + NUM_PORT_STATS]); +} + +static int mlx4_en_get_settings(struct net_device *dev, struct ethtool_cmd *cmd) +{ + cmd->autoneg = AUTONEG_DISABLE; + cmd->supported = SUPPORTED_10000baseT_Full; + cmd->advertising = SUPPORTED_10000baseT_Full; + if (netif_carrier_ok(dev)) { + cmd->speed = SPEED_10000; + cmd->duplex = DUPLEX_FULL; + } else { + cmd->speed = -1; + cmd->duplex = -1; + } + return 0; +} + +static int mlx4_en_set_settings(struct net_device *dev, struct ethtool_cmd *cmd) +{ + if ((cmd->autoneg == AUTONEG_ENABLE) || + (cmd->speed != SPEED_10000) || (cmd->duplex != DUPLEX_FULL)) + return -EINVAL; + + /* Nothing to change */ + return 0; +} + +static int mlx4_en_get_coalesce(struct net_device *dev, + struct ethtool_coalesce *coal) +{ + struct mlx4_en_priv *priv = netdev_priv(dev); + + coal->tx_coalesce_usecs = 0; + coal->tx_max_coalesced_frames = 0; + coal->rx_coalesce_usecs = priv->rx_usecs; + coal->rx_max_coalesced_frames = priv->rx_frames; + + coal->pkt_rate_low = priv->pkt_rate_low; + coal->rx_coalesce_usecs_low = priv->rx_usecs_low; + coal->pkt_rate_high = priv->pkt_rate_high; + coal->rx_coalesce_usecs_high = priv->rx_usecs_high; + coal->rate_sample_interval = priv->sample_interval; + coal->use_adaptive_rx_coalesce = priv->adaptive_rx_coal; + return 0; +} + +static int mlx4_en_set_coalesce(struct net_device *dev, + struct ethtool_coalesce *coal) +{ + struct mlx4_en_priv *priv = netdev_priv(dev); + int err, i; + + priv->rx_frames = (coal->rx_max_coalesced_frames == + MLX4_EN_AUTO_CONF) ? + MLX4_EN_RX_COAL_TARGET / + priv->dev->mtu + 1 : + coal->rx_max_coalesced_frames; + priv->rx_usecs = (coal->rx_coalesce_usecs == + MLX4_EN_AUTO_CONF) ? + MLX4_EN_RX_COAL_TIME : + coal->rx_coalesce_usecs; + + /* Set adaptive coalescing params */ + priv->pkt_rate_low = coal->pkt_rate_low; + priv->rx_usecs_low = coal->rx_coalesce_usecs_low; + priv->pkt_rate_high = coal->pkt_rate_high; + priv->rx_usecs_high = coal->rx_coalesce_usecs_high; + priv->sample_interval = coal->rate_sample_interval; + priv->adaptive_rx_coal = coal->use_adaptive_rx_coalesce; + priv->last_moder_time = MLX4_EN_AUTO_CONF; + if (priv->adaptive_rx_coal) + return 0; + + for (i = 0; i < priv->rx_ring_num; i++) { + priv->rx_cq[i].moder_cnt = priv->rx_frames; + priv->rx_cq[i].moder_time = priv->rx_usecs; + err = mlx4_en_set_cq_moder(priv, &priv->rx_cq[i]); + if (err) + return err; + } + return 0; +} + +static int mlx4_en_set_pauseparam(struct net_device *dev, + struct ethtool_pauseparam *pause) +{ + struct mlx4_en_priv *priv = netdev_priv(dev); + struct mlx4_en_dev *mdev = priv->mdev; + int err; + + mdev->profile.tx_pause = pause->tx_pause != 0; + mdev->profile.rx_pause = pause->rx_pause != 0; + err = mlx4_SET_PORT_general(mdev->dev, priv->port, + priv->rx_skb_size + ETH_FCS_LEN, + mdev->profile.tx_pause, + mdev->profile.tx_ppp, + mdev->profile.rx_pause, + mdev->profile.rx_ppp); + if (err) + mlx4_err(mdev, "Failed setting pause params to\n"); + + return err; +} + +static void mlx4_en_get_pauseparam(struct net_device *dev, + struct ethtool_pauseparam *pause) +{ + struct mlx4_en_priv *priv = netdev_priv(dev); + struct mlx4_en_dev *mdev = priv->mdev; + + pause->tx_pause = mdev->profile.tx_pause; + pause->rx_pause = mdev->profile.rx_pause; +} + +static void mlx4_en_get_ringparam(struct net_device *dev, + struct ethtool_ringparam *param) +{ + struct mlx4_en_priv *priv = netdev_priv(dev); + struct mlx4_en_dev *mdev = priv->mdev; + + memset(param, 0, sizeof(*param)); + param->rx_max_pending = mdev->dev->caps.max_rq_sg; + param->tx_max_pending = mdev->dev->caps.max_sq_sg; + param->rx_pending = mdev->profile.prof[priv->port].rx_ring_size; + param->tx_pending = mdev->profile.prof[priv->port].tx_ring_size; +} + +const struct ethtool_ops mlx4_en_ethtool_ops = { + .get_drvinfo = mlx4_en_get_drvinfo, + .get_settings = mlx4_en_get_settings, + .set_settings = mlx4_en_set_settings, +#ifdef NETIF_F_TSO + .get_tso = mlx4_en_get_tso, + .set_tso = mlx4_en_set_tso, +#endif + .get_sg = ethtool_op_get_sg, + .set_sg = ethtool_op_set_sg, + .get_link = ethtool_op_get_link, + .get_rx_csum = mlx4_en_get_rx_csum, + .set_rx_csum = mlx4_en_set_rx_csum, + .get_tx_csum = ethtool_op_get_tx_csum, + .set_tx_csum = ethtool_op_set_tx_ipv6_csum, + .get_strings = mlx4_en_get_strings, + .get_sset_count = mlx4_en_get_sset_count, + .get_ethtool_stats = mlx4_en_get_ethtool_stats, + .get_wol = mlx4_en_get_wol, + .get_msglevel = mlx4_en_get_msglevel, + .set_msglevel = mlx4_en_set_msglevel, + .get_coalesce = mlx4_en_get_coalesce, + .set_coalesce = mlx4_en_set_coalesce, + .get_pauseparam = mlx4_en_get_pauseparam, + .set_pauseparam = mlx4_en_set_pauseparam, + .get_ringparam = mlx4_en_get_ringparam, + .get_flags = ethtool_op_get_flags, + .set_flags = ethtool_op_set_flags, +}; + + + + + diff --git a/drivers/net/mlx4/en_port.c b/drivers/net/mlx4/en_port.c new file mode 100644 index 000000000000..c5a4c0389752 --- /dev/null +++ b/drivers/net/mlx4/en_port.c @@ -0,0 +1,261 @@ +/* + * Copyright (c) 2007 Mellanox Technologies. All rights reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the + * OpenIB.org BSD license below: + * + * Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * - Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * + * - Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + * + */ + + +#include <linux/if_vlan.h> + +#include <linux/mlx4/device.h> +#include <linux/mlx4/cmd.h> + +#include "en_port.h" +#include "mlx4_en.h" + + +int mlx4_SET_MCAST_FLTR(struct mlx4_dev *dev, u8 port, + u64 mac, u64 clear, u8 mode) +{ + return mlx4_cmd(dev, (mac | (clear << 63)), port, mode, + MLX4_CMD_SET_MCAST_FLTR, MLX4_CMD_TIME_CLASS_B); +} + +int mlx4_SET_VLAN_FLTR(struct mlx4_dev *dev, u8 port, struct vlan_group *grp) +{ + struct mlx4_cmd_mailbox *mailbox; + struct mlx4_set_vlan_fltr_mbox *filter; + int i; + int j; + int index = 0; + u32 entry; + int err = 0; + + mailbox = mlx4_alloc_cmd_mailbox(dev); + if (IS_ERR(mailbox)) + return PTR_ERR(mailbox); + + filter = mailbox->buf; + if (grp) { + memset(filter, 0, sizeof *filter); + for (i = VLAN_FLTR_SIZE - 1; i >= 0; i--) { + entry = 0; + for (j = 0; j < 32; j++) + if (vlan_group_get_device(grp, index++)) + entry |= 1 << j; + filter->entry[i] = cpu_to_be32(entry); + } + } else { + /* When no vlans are configured we block all vlans */ + memset(filter, 0, sizeof(*filter)); + } + err = mlx4_cmd(dev, mailbox->dma, port, 0, MLX4_CMD_SET_VLAN_FLTR, + MLX4_CMD_TIME_CLASS_B); + mlx4_free_cmd_mailbox(dev, mailbox); + return err; +} + + +int mlx4_SET_PORT_general(struct mlx4_dev *dev, u8 port, int mtu, + u8 pptx, u8 pfctx, u8 pprx, u8 pfcrx) +{ + struct mlx4_cmd_mailbox *mailbox; + struct mlx4_set_port_general_context *context; + int err; + u32 in_mod; + + mailbox = mlx4_alloc_cmd_mailbox(dev); + if (IS_ERR(mailbox)) + return PTR_ERR(mailbox); + context = mailbox->buf; + memset(context, 0, sizeof *context); + + context->flags = SET_PORT_GEN_ALL_VALID; + context->mtu = cpu_to_be16(mtu); + context->pptx = (pptx * (!pfctx)) << 7; + context->pfctx = pfctx; + context->pprx = (pprx * (!pfcrx)) << 7; + context->pfcrx = pfcrx; + + in_mod = MLX4_SET_PORT_GENERAL << 8 | port; + err = mlx4_cmd(dev, mailbox->dma, in_mod, 1, MLX4_CMD_SET_PORT, + MLX4_CMD_TIME_CLASS_B); + + mlx4_free_cmd_mailbox(dev, mailbox); + return err; +} + +int mlx4_SET_PORT_qpn_calc(struct mlx4_dev *dev, u8 port, u32 base_qpn, + u8 promisc) +{ + struct mlx4_cmd_mailbox *mailbox; + struct mlx4_set_port_rqp_calc_context *context; + int err; + u32 in_mod; + + mailbox = mlx4_alloc_cmd_mailbox(dev); + if (IS_ERR(mailbox)) + return PTR_ERR(mailbox); + context = mailbox->buf; + memset(context, 0, sizeof *context); + + context->base_qpn = cpu_to_be32(base_qpn); + context->promisc = cpu_to_be32(promisc << SET_PORT_PROMISC_SHIFT | base_qpn); + context->mcast = cpu_to_be32(1 << SET_PORT_PROMISC_SHIFT | base_qpn); + context->intra_no_vlan = 0; + context->no_vlan = MLX4_NO_VLAN_IDX; + context->intra_vlan_miss = 0; + context->vlan_miss = MLX4_VLAN_MISS_IDX; + + in_mod = MLX4_SET_PORT_RQP_CALC << 8 | port; + err = mlx4_cmd(dev, mailbox->dma, in_mod, 1, MLX4_CMD_SET_PORT, + MLX4_CMD_TIME_CLASS_B); + + mlx4_free_cmd_mailbox(dev, mailbox); + return err; +} + + +int mlx4_en_DUMP_ETH_STATS(struct mlx4_en_dev *mdev, u8 port, u8 reset) +{ + struct mlx4_en_stat_out_mbox *mlx4_en_stats; + struct mlx4_en_priv *priv = netdev_priv(mdev->pndev[port]); + struct net_device_stats *stats = &priv->stats; + struct mlx4_cmd_mailbox *mailbox; + u64 in_mod = reset << 8 | port; + int err; + + mailbox = mlx4_alloc_cmd_mailbox(mdev->dev); + if (IS_ERR(mailbox)) + return PTR_ERR(mailbox); + memset(mailbox->buf, 0, sizeof(*mlx4_en_stats)); + err = mlx4_cmd_box(mdev->dev, 0, mailbox->dma, in_mod, 0, + MLX4_CMD_DUMP_ETH_STATS, MLX4_CMD_TIME_CLASS_B); + if (err) + goto out; + + mlx4_en_stats = mailbox->buf; + + spin_lock_bh(&priv->stats_lock); + + stats->rx_packets = be32_to_cpu(mlx4_en_stats->RTOTFRMS) - + be32_to_cpu(mlx4_en_stats->RDROP); + stats->tx_packets = be64_to_cpu(mlx4_en_stats->TTOT_prio_0) + + be64_to_cpu(mlx4_en_stats->TTOT_prio_1) + + be64_to_cpu(mlx4_en_stats->TTOT_prio_2) + + be64_to_cpu(mlx4_en_stats->TTOT_prio_3) + + be64_to_cpu(mlx4_en_stats->TTOT_prio_4) + + be64_to_cpu(mlx4_en_stats->TTOT_prio_5) + + be64_to_cpu(mlx4_en_stats->TTOT_prio_6) + + be64_to_cpu(mlx4_en_stats->TTOT_prio_7) + + be64_to_cpu(mlx4_en_stats->TTOT_novlan) + + be64_to_cpu(mlx4_en_stats->TTOT_loopbk); + stats->rx_bytes = be64_to_cpu(mlx4_en_stats->ROCT_prio_0) + + be64_to_cpu(mlx4_en_stats->ROCT_prio_1) + + be64_to_cpu(mlx4_en_stats->ROCT_prio_2) + + be64_to_cpu(mlx4_en_stats->ROCT_prio_3) + + be64_to_cpu(mlx4_en_stats->ROCT_prio_4) + + be64_to_cpu(mlx4_en_stats->ROCT_prio_5) + + be64_to_cpu(mlx4_en_stats->ROCT_prio_6) + + be64_to_cpu(mlx4_en_stats->ROCT_prio_7) + + be64_to_cpu(mlx4_en_stats->ROCT_novlan); + + stats->tx_bytes = be64_to_cpu(mlx4_en_stats->TTTLOCT_prio_0) + + be64_to_cpu(mlx4_en_stats->TTTLOCT_prio_1) + + be64_to_cpu(mlx4_en_stats->TTTLOCT_prio_2) + + be64_to_cpu(mlx4_en_stats->TTTLOCT_prio_3) + + be64_to_cpu(mlx4_en_stats->TTTLOCT_prio_4) + + be64_to_cpu(mlx4_en_stats->TTTLOCT_prio_5) + + be64_to_cpu(mlx4_en_stats->TTTLOCT_prio_6) + + be64_to_cpu(mlx4_en_stats->TTTLOCT_prio_7) + + be64_to_cpu(mlx4_en_stats->TTTLOCT_novlan) + + be64_to_cpu(mlx4_en_stats->TTTLOCT_loopbk); + + stats->rx_errors = be64_to_cpu(mlx4_en_stats->PCS) + + be32_to_cpu(mlx4_en_stats->RdropLength) + + be32_to_cpu(mlx4_en_stats->RJBBR) + + be32_to_cpu(mlx4_en_stats->RCRC) + + be32_to_cpu(mlx4_en_stats->RRUNT); + stats->tx_errors = be32_to_cpu(mlx4_en_stats->TDROP); + stats->multicast = be64_to_cpu(mlx4_en_stats->MCAST_prio_0) + + be64_to_cpu(mlx4_en_stats->MCAST_prio_1) + + be64_to_cpu(mlx4_en_stats->MCAST_prio_2) + + be64_to_cpu(mlx4_en_stats->MCAST_prio_3) + + be64_to_cpu(mlx4_en_stats->MCAST_prio_4) + + be64_to_cpu(mlx4_en_stats->MCAST_prio_5) + + be64_to_cpu(mlx4_en_stats->MCAST_prio_6) + + be64_to_cpu(mlx4_en_stats->MCAST_prio_7) + + be64_to_cpu(mlx4_en_stats->MCAST_novlan); + stats->collisions = 0; + stats->rx_length_errors = be32_to_cpu(mlx4_en_stats->RdropLength); + stats->rx_over_errors = be32_to_cpu(mlx4_en_stats->RdropOvflw); + stats->rx_crc_errors = be32_to_cpu(mlx4_en_stats->RCRC); + stats->rx_frame_errors = 0; + stats->rx_fifo_errors = be32_to_cpu(mlx4_en_stats->RdropOvflw); + stats->rx_missed_errors = be32_to_cpu(mlx4_en_stats->RdropOvflw); + stats->tx_aborted_errors = 0; + stats->tx_carrier_errors = 0; + stats->tx_fifo_errors = 0; + stats->tx_heartbeat_errors = 0; + stats->tx_window_errors = 0; + + priv->pkstats.broadcast = + be64_to_cpu(mlx4_en_stats->RBCAST_prio_0) + + be64_to_cpu(mlx4_en_stats->RBCAST_prio_1) + + be64_to_cpu(mlx4_en_stats->RBCAST_prio_2) + + be64_to_cpu(mlx4_en_stats->RBCAST_prio_3) + + be64_to_cpu(mlx4_en_stats->RBCAST_prio_4) + + be64_to_cpu(mlx4_en_stats->RBCAST_prio_5) + + be64_to_cpu(mlx4_en_stats->RBCAST_prio_6) + + be64_to_cpu(mlx4_en_stats->RBCAST_prio_7) + + be64_to_cpu(mlx4_en_stats->RBCAST_novlan); + priv->pkstats.rx_prio[0] = be64_to_cpu(mlx4_en_stats->RTOT_prio_0); + priv->pkstats.rx_prio[1] = be64_to_cpu(mlx4_en_stats->RTOT_prio_1); + priv->pkstats.rx_prio[2] = be64_to_cpu(mlx4_en_stats->RTOT_prio_2); + priv->pkstats.rx_prio[3] = be64_to_cpu(mlx4_en_stats->RTOT_prio_3); + priv->pkstats.rx_prio[4] = be64_to_cpu(mlx4_en_stats->RTOT_prio_4); + priv->pkstats.rx_prio[5] = be64_to_cpu(mlx4_en_stats->RTOT_prio_5); + priv->pkstats.rx_prio[6] = be64_to_cpu(mlx4_en_stats->RTOT_prio_6); + priv->pkstats.rx_prio[7] = be64_to_cpu(mlx4_en_stats->RTOT_prio_7); + priv->pkstats.tx_prio[0] = be64_to_cpu(mlx4_en_stats->TTOT_prio_0); + priv->pkstats.tx_prio[1] = be64_to_cpu(mlx4_en_stats->TTOT_prio_1); + priv->pkstats.tx_prio[2] = be64_to_cpu(mlx4_en_stats->TTOT_prio_2); + priv->pkstats.tx_prio[3] = be64_to_cpu(mlx4_en_stats->TTOT_prio_3); + priv->pkstats.tx_prio[4] = be64_to_cpu(mlx4_en_stats->TTOT_prio_4); + priv->pkstats.tx_prio[5] = be64_to_cpu(mlx4_en_stats->TTOT_prio_5); + priv->pkstats.tx_prio[6] = be64_to_cpu(mlx4_en_stats->TTOT_prio_6); + priv->pkstats.tx_prio[7] = be64_to_cpu(mlx4_en_stats->TTOT_prio_7); + spin_unlock_bh(&priv->stats_lock); + +out: + mlx4_free_cmd_mailbox(mdev->dev, mailbox); + return err; +} + diff --git a/drivers/net/mlx4/en_port.h b/drivers/net/mlx4/en_port.h new file mode 100644 index 000000000000..e6477f12beb5 --- /dev/null +++ b/drivers/net/mlx4/en_port.h @@ -0,0 +1,570 @@ +/* + * Copyright (c) 2007 Mellanox Technologies. All rights reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the + * OpenIB.org BSD license below: + * + * Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * - Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * + * - Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + * + */ + +#ifndef _MLX4_EN_PORT_H_ +#define _MLX4_EN_PORT_H_ + + +#define SET_PORT_GEN_ALL_VALID 0x7 +#define SET_PORT_PROMISC_SHIFT 31 + +enum { + MLX4_CMD_SET_VLAN_FLTR = 0x47, + MLX4_CMD_SET_MCAST_FLTR = 0x48, + MLX4_CMD_DUMP_ETH_STATS = 0x49, +}; + +struct mlx4_set_port_general_context { + u8 reserved[3]; + u8 flags; + u16 reserved2; + __be16 mtu; + u8 pptx; + u8 pfctx; + u16 reserved3; + u8 pprx; + u8 pfcrx; + u16 reserved4; +}; + +struct mlx4_set_port_rqp_calc_context { + __be32 base_qpn; + __be32 flags; + u8 reserved[3]; + u8 mac_miss; + u8 intra_no_vlan; + u8 no_vlan; + u8 intra_vlan_miss; + u8 vlan_miss; + u8 reserved2[3]; + u8 no_vlan_prio; + __be32 promisc; + __be32 mcast; +}; + +#define VLAN_FLTR_SIZE 128 +struct mlx4_set_vlan_fltr_mbox { + __be32 entry[VLAN_FLTR_SIZE]; +}; + + +enum { + MLX4_MCAST_CONFIG = 0, + MLX4_MCAST_DISABLE = 1, + MLX4_MCAST_ENABLE = 2, +}; + + +struct mlx4_en_stat_out_mbox { + /* Received frames with a length of 64 octets */ + __be64 R64_prio_0; + __be64 R64_prio_1; + __be64 R64_prio_2; + __be64 R64_prio_3; + __be64 R64_prio_4; + __be64 R64_prio_5; + __be64 R64_prio_6; + __be64 R64_prio_7; + __be64 R64_novlan; + /* Received frames with a length of 127 octets */ + __be64 R127_prio_0; + __be64 R127_prio_1; + __be64 R127_prio_2; + __be64 R127_prio_3; + __be64 R127_prio_4; + __be64 R127_prio_5; + __be64 R127_prio_6; + __be64 R127_prio_7; + __be64 R127_novlan; + /* Received frames with a length of 255 octets */ + __be64 R255_prio_0; + __be64 R255_prio_1; + __be64 R255_prio_2; + __be64 R255_prio_3; + __be64 R255_prio_4; + __be64 R255_prio_5; + __be64 R255_prio_6; + __be64 R255_prio_7; + __be64 R255_novlan; + /* Received frames with a length of 511 octets */ + __be64 R511_prio_0; + __be64 R511_prio_1; + __be64 R511_prio_2; + __be64 R511_prio_3; + __be64 R511_prio_4; + __be64 R511_prio_5; + __be64 R511_prio_6; + __be64 R511_prio_7; + __be64 R511_novlan; + /* Received frames with a length of 1023 octets */ + __be64 R1023_prio_0; + __be64 R1023_prio_1; + __be64 R1023_prio_2; + __be64 R1023_prio_3; + __be64 R1023_prio_4; + __be64 R1023_prio_5; + __be64 R1023_prio_6; + __be64 R1023_prio_7; + __be64 R1023_novlan; + /* Received frames with a length of 1518 octets */ + __be64 R1518_prio_0; + __be64 R1518_prio_1; + __be64 R1518_prio_2; + __be64 R1518_prio_3; + __be64 R1518_prio_4; + __be64 R1518_prio_5; + __be64 R1518_prio_6; + __be64 R1518_prio_7; + __be64 R1518_novlan; + /* Received frames with a length of 1522 octets */ + __be64 R1522_prio_0; + __be64 R1522_prio_1; + __be64 R1522_prio_2; + __be64 R1522_prio_3; + __be64 R1522_prio_4; + __be64 R1522_prio_5; + __be64 R1522_prio_6; + __be64 R1522_prio_7; + __be64 R1522_novlan; + /* Received frames with a length of 1548 octets */ + __be64 R1548_prio_0; + __be64 R1548_prio_1; + __be64 R1548_prio_2; + __be64 R1548_prio_3; + __be64 R1548_prio_4; + __be64 R1548_prio_5; + __be64 R1548_prio_6; + __be64 R1548_prio_7; + __be64 R1548_novlan; + /* Received frames with a length of 1548 < octets < MTU */ + __be64 R2MTU_prio_0; + __be64 R2MTU_prio_1; + __be64 R2MTU_prio_2; + __be64 R2MTU_prio_3; + __be64 R2MTU_prio_4; + __be64 R2MTU_prio_5; + __be64 R2MTU_prio_6; + __be64 R2MTU_prio_7; + __be64 R2MTU_novlan; + /* Received frames with a length of MTU< octets and good CRC */ + __be64 RGIANT_prio_0; + __be64 RGIANT_prio_1; + __be64 RGIANT_prio_2; + __be64 RGIANT_prio_3; + __be64 RGIANT_prio_4; + __be64 RGIANT_prio_5; + __be64 RGIANT_prio_6; + __be64 RGIANT_prio_7; + __be64 RGIANT_novlan; + /* Received broadcast frames with good CRC */ + __be64 RBCAST_prio_0; + __be64 RBCAST_prio_1; + __be64 RBCAST_prio_2; + __be64 RBCAST_prio_3; + __be64 RBCAST_prio_4; + __be64 RBCAST_prio_5; + __be64 RBCAST_prio_6; + __be64 RBCAST_prio_7; + __be64 RBCAST_novlan; + /* Received multicast frames with good CRC */ + __be64 MCAST_prio_0; + __be64 MCAST_prio_1; + __be64 MCAST_prio_2; + __be64 MCAST_prio_3; + __be64 MCAST_prio_4; + __be64 MCAST_prio_5; + __be64 MCAST_prio_6; + __be64 MCAST_prio_7; + __be64 MCAST_novlan; + /* Received unicast not short or GIANT frames with good CRC */ + __be64 RTOTG_prio_0; + __be64 RTOTG_prio_1; + __be64 RTOTG_prio_2; + __be64 RTOTG_prio_3; + __be64 RTOTG_prio_4; + __be64 RTOTG_prio_5; + __be64 RTOTG_prio_6; + __be64 RTOTG_prio_7; + __be64 RTOTG_novlan; + + /* Count of total octets of received frames, includes framing characters */ + __be64 RTTLOCT_prio_0; + /* Count of total octets of received frames, not including framing + characters */ + __be64 RTTLOCT_NOFRM_prio_0; + /* Count of Total number of octets received + (only for frames without errors) */ + __be64 ROCT_prio_0; + + __be64 RTTLOCT_prio_1; + __be64 RTTLOCT_NOFRM_prio_1; + __be64 ROCT_prio_1; + + __be64 RTTLOCT_prio_2; + __be64 RTTLOCT_NOFRM_prio_2; + __be64 ROCT_prio_2; + + __be64 RTTLOCT_prio_3; + __be64 RTTLOCT_NOFRM_prio_3; + __be64 ROCT_prio_3; + + __be64 RTTLOCT_prio_4; + __be64 RTTLOCT_NOFRM_prio_4; + __be64 ROCT_prio_4; + + __be64 RTTLOCT_prio_5; + __be64 RTTLOCT_NOFRM_prio_5; + __be64 ROCT_prio_5; + + __be64 RTTLOCT_prio_6; + __be64 RTTLOCT_NOFRM_prio_6; + __be64 ROCT_prio_6; + + __be64 RTTLOCT_prio_7; + __be64 RTTLOCT_NOFRM_prio_7; + __be64 ROCT_prio_7; + + __be64 RTTLOCT_novlan; + __be64 RTTLOCT_NOFRM_novlan; + __be64 ROCT_novlan; + + /* Count of Total received frames including bad frames */ + __be64 RTOT_prio_0; + /* Count of Total number of received frames with 802.1Q encapsulation */ + __be64 R1Q_prio_0; + __be64 reserved1; + + __be64 RTOT_prio_1; + __be64 R1Q_prio_1; + __be64 reserved2; + + __be64 RTOT_prio_2; + __be64 R1Q_prio_2; + __be64 reserved3; + + __be64 RTOT_prio_3; + __be64 R1Q_prio_3; + __be64 reserved4; + + __be64 RTOT_prio_4; + __be64 R1Q_prio_4; + __be64 reserved5; + + __be64 RTOT_prio_5; + __be64 R1Q_prio_5; + __be64 reserved6; + + __be64 RTOT_prio_6; + __be64 R1Q_prio_6; + __be64 reserved7; + + __be64 RTOT_prio_7; + __be64 R1Q_prio_7; + __be64 reserved8; + + __be64 RTOT_novlan; + __be64 R1Q_novlan; + __be64 reserved9; + + /* Total number of Successfully Received Control Frames */ + __be64 RCNTL; + __be64 reserved10; + __be64 reserved11; + __be64 reserved12; + /* Count of received frames with a length/type field value between 46 + (42 for VLANtagged frames) and 1500 (also 1500 for VLAN-tagged frames), + inclusive */ + __be64 RInRangeLengthErr; + /* Count of received frames with length/type field between 1501 and 1535 + decimal, inclusive */ + __be64 ROutRangeLengthErr; + /* Count of received frames that are longer than max allowed size for + 802.3 frames (1518/1522) */ + __be64 RFrmTooLong; + /* Count frames received with PCS error */ + __be64 PCS; + + /* Transmit frames with a length of 64 octets */ + __be64 T64_prio_0; + __be64 T64_prio_1; + __be64 T64_prio_2; + __be64 T64_prio_3; + __be64 T64_prio_4; + __be64 T64_prio_5; + __be64 T64_prio_6; + __be64 T64_prio_7; + __be64 T64_novlan; + __be64 T64_loopbk; + /* Transmit frames with a length of 65 to 127 octets. */ + __be64 T127_prio_0; + __be64 T127_prio_1; + __be64 T127_prio_2; + __be64 T127_prio_3; + __be64 T127_prio_4; + __be64 T127_prio_5; + __be64 T127_prio_6; + __be64 T127_prio_7; + __be64 T127_novlan; + __be64 T127_loopbk; + /* Transmit frames with a length of 128 to 255 octets */ + __be64 T255_prio_0; + __be64 T255_prio_1; + __be64 T255_prio_2; + __be64 T255_prio_3; + __be64 T255_prio_4; + __be64 T255_prio_5; + __be64 T255_prio_6; + __be64 T255_prio_7; + __be64 T255_novlan; + __be64 T255_loopbk; + /* Transmit frames with a length of 256 to 511 octets */ + __be64 T511_prio_0; + __be64 T511_prio_1; + __be64 T511_prio_2; + __be64 T511_prio_3; + __be64 T511_prio_4; + __be64 T511_prio_5; + __be64 T511_prio_6; + __be64 T511_prio_7; + __be64 T511_novlan; + __be64 T511_loopbk; + /* Transmit frames with a length of 512 to 1023 octets */ + __be64 T1023_prio_0; + __be64 T1023_prio_1; + __be64 T1023_prio_2; + __be64 T1023_prio_3; + __be64 T1023_prio_4; + __be64 T1023_prio_5; + __be64 T1023_prio_6; + __be64 T1023_prio_7; + __be64 T1023_novlan; + __be64 T1023_loopbk; + /* Transmit frames with a length of 1024 to 1518 octets */ + __be64 T1518_prio_0; + __be64 T1518_prio_1; + __be64 T1518_prio_2; + __be64 T1518_prio_3; + __be64 T1518_prio_4; + __be64 T1518_prio_5; + __be64 T1518_prio_6; + __be64 T1518_prio_7; + __be64 T1518_novlan; + __be64 T1518_loopbk; + /* Counts transmit frames with a length of 1519 to 1522 bytes */ + __be64 T1522_prio_0; + __be64 T1522_prio_1; + __be64 T1522_prio_2; + __be64 T1522_prio_3; + __be64 T1522_prio_4; + __be64 T1522_prio_5; + __be64 T1522_prio_6; + __be64 T1522_prio_7; + __be64 T1522_novlan; + __be64 T1522_loopbk; + /* Transmit frames with a length of 1523 to 1548 octets */ + __be64 T1548_prio_0; + __be64 T1548_prio_1; + __be64 T1548_prio_2; + __be64 T1548_prio_3; + __be64 T1548_prio_4; + __be64 T1548_prio_5; + __be64 T1548_prio_6; + __be64 T1548_prio_7; + __be64 T1548_novlan; + __be64 T1548_loopbk; + /* Counts transmit frames with a length of 1549 to MTU bytes */ + __be64 T2MTU_prio_0; + __be64 T2MTU_prio_1; + __be64 T2MTU_prio_2; + __be64 T2MTU_prio_3; + __be64 T2MTU_prio_4; + __be64 T2MTU_prio_5; + __be64 T2MTU_prio_6; + __be64 T2MTU_prio_7; + __be64 T2MTU_novlan; + __be64 T2MTU_loopbk; + /* Transmit frames with a length greater than MTU octets and a good CRC. */ + __be64 TGIANT_prio_0; + __be64 TGIANT_prio_1; + __be64 TGIANT_prio_2; + __be64 TGIANT_prio_3; + __be64 TGIANT_prio_4; + __be64 TGIANT_prio_5; + __be64 TGIANT_prio_6; + __be64 TGIANT_prio_7; + __be64 TGIANT_novlan; + __be64 TGIANT_loopbk; + /* Transmit broadcast frames with a good CRC */ + __be64 TBCAST_prio_0; + __be64 TBCAST_prio_1; + __be64 TBCAST_prio_2; + __be64 TBCAST_prio_3; + __be64 TBCAST_prio_4; + __be64 TBCAST_prio_5; + __be64 TBCAST_prio_6; + __be64 TBCAST_prio_7; + __be64 TBCAST_novlan; + __be64 TBCAST_loopbk; + /* Transmit multicast frames with a good CRC */ + __be64 TMCAST_prio_0; + __be64 TMCAST_prio_1; + __be64 TMCAST_prio_2; + __be64 TMCAST_prio_3; + __be64 TMCAST_prio_4; + __be64 TMCAST_prio_5; + __be64 TMCAST_prio_6; + __be64 TMCAST_prio_7; + __be64 TMCAST_novlan; + __be64 TMCAST_loopbk; + /* Transmit good frames that are neither broadcast nor multicast */ + __be64 TTOTG_prio_0; + __be64 TTOTG_prio_1; + __be64 TTOTG_prio_2; + __be64 TTOTG_prio_3; + __be64 TTOTG_prio_4; + __be64 TTOTG_prio_5; + __be64 TTOTG_prio_6; + __be64 TTOTG_prio_7; + __be64 TTOTG_novlan; + __be64 TTOTG_loopbk; + + /* total octets of transmitted frames, including framing characters */ + __be64 TTTLOCT_prio_0; + /* total octets of transmitted frames, not including framing characters */ + __be64 TTTLOCT_NOFRM_prio_0; + /* ifOutOctets */ + __be64 TOCT_prio_0; + + __be64 TTTLOCT_prio_1; + __be64 TTTLOCT_NOFRM_prio_1; + __be64 TOCT_prio_1; + + __be64 TTTLOCT_prio_2; + __be64 TTTLOCT_NOFRM_prio_2; + __be64 TOCT_prio_2; + + __be64 TTTLOCT_prio_3; + __be64 TTTLOCT_NOFRM_prio_3; + __be64 TOCT_prio_3; + + __be64 TTTLOCT_prio_4; + __be64 TTTLOCT_NOFRM_prio_4; + __be64 TOCT_prio_4; + + __be64 TTTLOCT_prio_5; + __be64 TTTLOCT_NOFRM_prio_5; + __be64 TOCT_prio_5; + + __be64 TTTLOCT_prio_6; + __be64 TTTLOCT_NOFRM_prio_6; + __be64 TOCT_prio_6; + + __be64 TTTLOCT_prio_7; + __be64 TTTLOCT_NOFRM_prio_7; + __be64 TOCT_prio_7; + + __be64 TTTLOCT_novlan; + __be64 TTTLOCT_NOFRM_novlan; + __be64 TOCT_novlan; + + __be64 TTTLOCT_loopbk; + __be64 TTTLOCT_NOFRM_loopbk; + __be64 TOCT_loopbk; + + /* Total frames transmitted with a good CRC that are not aborted */ + __be64 TTOT_prio_0; + /* Total number of frames transmitted with 802.1Q encapsulation */ + __be64 T1Q_prio_0; + __be64 reserved13; + + __be64 TTOT_prio_1; + __be64 T1Q_prio_1; + __be64 reserved14; + + __be64 TTOT_prio_2; + __be64 T1Q_prio_2; + __be64 reserved15; + + __be64 TTOT_prio_3; + __be64 T1Q_prio_3; + __be64 reserved16; + + __be64 TTOT_prio_4; + __be64 T1Q_prio_4; + __be64 reserved17; + + __be64 TTOT_prio_5; + __be64 T1Q_prio_5; + __be64 reserved18; + + __be64 TTOT_prio_6; + __be64 T1Q_prio_6; + __be64 reserved19; + + __be64 TTOT_prio_7; + __be64 T1Q_prio_7; + __be64 reserved20; + + __be64 TTOT_novlan; + __be64 T1Q_novlan; + __be64 reserved21; + + __be64 TTOT_loopbk; + __be64 T1Q_loopbk; + __be64 reserved22; + + /* Received frames with a length greater than MTU octets and a bad CRC */ + __be32 RJBBR; + /* Received frames with a bad CRC that are not runts, jabbers, + or alignment errors */ + __be32 RCRC; + /* Received frames with SFD with a length of less than 64 octets and a + bad CRC */ + __be32 RRUNT; + /* Received frames with a length less than 64 octets and a good CRC */ + __be32 RSHORT; + /* Total Number of Received Packets Dropped */ + __be32 RDROP; + /* Drop due to overflow */ + __be32 RdropOvflw; + /* Drop due to overflow */ + __be32 RdropLength; + /* Total of good frames. Does not include frames received with + frame-too-long, FCS, or length errors */ + __be32 RTOTFRMS; + /* Total dropped Xmited packets */ + __be32 TDROP; +}; + + +#endif diff --git a/drivers/net/mlx4/en_resources.c b/drivers/net/mlx4/en_resources.c new file mode 100644 index 000000000000..a0545209e507 --- /dev/null +++ b/drivers/net/mlx4/en_resources.c @@ -0,0 +1,96 @@ +/* + * Copyright (c) 2007 Mellanox Technologies. All rights reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the + * OpenIB.org BSD license below: + * + * Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * - Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * + * - Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + * + */ + +#include <linux/vmalloc.h> +#include <linux/mlx4/qp.h> + +#include "mlx4_en.h" + +void mlx4_en_fill_qp_context(struct mlx4_en_priv *priv, int size, int stride, + int is_tx, int rss, int qpn, int cqn, int srqn, + struct mlx4_qp_context *context) +{ + struct mlx4_en_dev *mdev = priv->mdev; + + memset(context, 0, sizeof *context); + context->flags = cpu_to_be32(7 << 16 | rss << 13); + context->pd = cpu_to_be32(mdev->priv_pdn); + context->mtu_msgmax = 0xff; + context->rq_size_stride = 0; + if (is_tx) + context->sq_size_stride = ilog2(size) << 3 | (ilog2(stride) - 4); + else + context->sq_size_stride = 1; + context->usr_page = cpu_to_be32(mdev->priv_uar.index); + context->local_qpn = cpu_to_be32(qpn); + context->pri_path.ackto = 1 & 0x07; + context->pri_path.sched_queue = 0x83 | (priv->port - 1) << 6; + context->pri_path.counter_index = 0xff; + context->cqn_send = cpu_to_be32(cqn); + context->cqn_recv = cpu_to_be32(cqn); + context->db_rec_addr = cpu_to_be64(priv->res.db.dma << 2); + if (!rss) + context->srqn = cpu_to_be32(MLX4_EN_USE_SRQ | srqn); +} + + +int mlx4_en_map_buffer(struct mlx4_buf *buf) +{ + struct page **pages; + int i; + + if (BITS_PER_LONG == 64 || buf->nbufs == 1) + return 0; + + pages = kmalloc(sizeof *pages * buf->nbufs, GFP_KERNEL); + if (!pages) + return -ENOMEM; + + for (i = 0; i < buf->nbufs; ++i) + pages[i] = virt_to_page(buf->page_list[i].buf); + + buf->direct.buf = vmap(pages, buf->nbufs, VM_MAP, PAGE_KERNEL); + kfree(pages); + if (!buf->direct.buf) + return -ENOMEM; + + return 0; +} + +void mlx4_en_unmap_buffer(struct mlx4_buf *buf) +{ + if (BITS_PER_LONG == 64 || buf->nbufs == 1) + return; + + vunmap(buf->direct.buf); +} diff --git a/drivers/net/mlx4/en_rx.c b/drivers/net/mlx4/en_rx.c new file mode 100644 index 000000000000..6232227f56c3 --- /dev/null +++ b/drivers/net/mlx4/en_rx.c @@ -0,0 +1,1080 @@ +/* + * Copyright (c) 2007 Mellanox Technologies. All rights reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the + * OpenIB.org BSD license below: + * + * Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * - Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * + * - Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + * + */ + +#include <linux/mlx4/cq.h> +#include <linux/mlx4/qp.h> +#include <linux/skbuff.h> +#include <linux/if_ether.h> +#include <linux/if_vlan.h> +#include <linux/vmalloc.h> + +#include "mlx4_en.h" + +static void *get_wqe(struct mlx4_en_rx_ring *ring, int n) +{ + int offset = n << ring->srq.wqe_shift; + return ring->buf + offset; +} + +static void mlx4_en_srq_event(struct mlx4_srq *srq, enum mlx4_event type) +{ + return; +} + +static int mlx4_en_get_frag_header(struct skb_frag_struct *frags, void **mac_hdr, + void **ip_hdr, void **tcpudp_hdr, + u64 *hdr_flags, void *priv) +{ + *mac_hdr = page_address(frags->page) + frags->page_offset; + *ip_hdr = *mac_hdr + ETH_HLEN; + *tcpudp_hdr = (struct tcphdr *)(*ip_hdr + sizeof(struct iphdr)); + *hdr_flags = LRO_IPV4 | LRO_TCP; + + return 0; +} + +static int mlx4_en_alloc_frag(struct mlx4_en_priv *priv, + struct mlx4_en_rx_desc *rx_desc, + struct skb_frag_struct *skb_frags, + struct mlx4_en_rx_alloc *ring_alloc, + int i) +{ + struct mlx4_en_dev *mdev = priv->mdev; + struct mlx4_en_frag_info *frag_info = &priv->frag_info[i]; + struct mlx4_en_rx_alloc *page_alloc = &ring_alloc[i]; + struct page *page; + dma_addr_t dma; + + if (page_alloc->offset == frag_info->last_offset) { + /* Allocate new page */ + page = alloc_pages(GFP_ATOMIC | __GFP_COMP, MLX4_EN_ALLOC_ORDER); + if (!page) + return -ENOMEM; + + skb_frags[i].page = page_alloc->page; + skb_frags[i].page_offset = page_alloc->offset; + page_alloc->page = page; + page_alloc->offset = frag_info->frag_align; + } else { + page = page_alloc->page; + get_page(page); + + skb_frags[i].page = page; + skb_frags[i].page_offset = page_alloc->offset; + page_alloc->offset += frag_info->frag_stride; + } + dma = pci_map_single(mdev->pdev, page_address(skb_frags[i].page) + + skb_frags[i].page_offset, frag_info->frag_size, + PCI_DMA_FROMDEVICE); + rx_desc->data[i].addr = cpu_to_be64(dma); + return 0; +} + +static int mlx4_en_init_allocator(struct mlx4_en_priv *priv, + struct mlx4_en_rx_ring *ring) +{ + struct mlx4_en_rx_alloc *page_alloc; + int i; + + for (i = 0; i < priv->num_frags; i++) { + page_alloc = &ring->page_alloc[i]; + page_alloc->page = alloc_pages(GFP_ATOMIC | __GFP_COMP, + MLX4_EN_ALLOC_ORDER); + if (!page_alloc->page) + goto out; + + page_alloc->offset = priv->frag_info[i].frag_align; + mlx4_dbg(DRV, priv, "Initialized allocator:%d with page:%p\n", + i, page_alloc->page); + } + return 0; + +out: + while (i--) { + page_alloc = &ring->page_alloc[i]; + put_page(page_alloc->page); + page_alloc->page = NULL; + } + return -ENOMEM; +} + +static void mlx4_en_destroy_allocator(struct mlx4_en_priv *priv, + struct mlx4_en_rx_ring *ring) +{ + struct mlx4_en_rx_alloc *page_alloc; + int i; + + for (i = 0; i < priv->num_frags; i++) { + page_alloc = &ring->page_alloc[i]; + mlx4_dbg(DRV, priv, "Freeing allocator:%d count:%d\n", + i, page_count(page_alloc->page)); + + put_page(page_alloc->page); + page_alloc->page = NULL; + } +} + + +static void mlx4_en_init_rx_desc(struct mlx4_en_priv *priv, + struct mlx4_en_rx_ring *ring, int index) +{ + struct mlx4_en_rx_desc *rx_desc = ring->buf + ring->stride * index; + struct skb_frag_struct *skb_frags = ring->rx_info + + (index << priv->log_rx_info); + int possible_frags; + int i; + + /* Pre-link descriptor */ + rx_desc->next.next_wqe_index = cpu_to_be16((index + 1) & ring->size_mask); + + /* Set size and memtype fields */ + for (i = 0; i < priv->num_frags; i++) { + skb_frags[i].size = priv->frag_info[i].frag_size; + rx_desc->data[i].byte_count = + cpu_to_be32(priv->frag_info[i].frag_size); + rx_desc->data[i].lkey = cpu_to_be32(priv->mdev->mr.key); + } + + /* If the number of used fragments does not fill up the ring stride, + * remaining (unused) fragments must be padded with null address/size + * and a special memory key */ + possible_frags = (ring->stride - sizeof(struct mlx4_en_rx_desc)) / DS_SIZE; + for (i = priv->num_frags; i < possible_frags; i++) { + rx_desc->data[i].byte_count = 0; + rx_desc->data[i].lkey = cpu_to_be32(MLX4_EN_MEMTYPE_PAD); + rx_desc->data[i].addr = 0; + } +} + + +static int mlx4_en_prepare_rx_desc(struct mlx4_en_priv *priv, + struct mlx4_en_rx_ring *ring, int index) +{ + struct mlx4_en_rx_desc *rx_desc = ring->buf + (index * ring->stride); + struct skb_frag_struct *skb_frags = ring->rx_info + + (index << priv->log_rx_info); + int i; + + for (i = 0; i < priv->num_frags; i++) + if (mlx4_en_alloc_frag(priv, rx_desc, skb_frags, ring->page_alloc, i)) + goto err; + + return 0; + +err: + while (i--) + put_page(skb_frags[i].page); + return -ENOMEM; +} + +static inline void mlx4_en_update_rx_prod_db(struct mlx4_en_rx_ring *ring) +{ + *ring->wqres.db.db = cpu_to_be32(ring->prod & 0xffff); +} + +static int mlx4_en_fill_rx_buffers(struct mlx4_en_priv *priv) +{ + struct mlx4_en_dev *mdev = priv->mdev; + struct mlx4_en_rx_ring *ring; + int ring_ind; + int buf_ind; + + for (buf_ind = 0; buf_ind < priv->prof->rx_ring_size; buf_ind++) { + for (ring_ind = 0; ring_ind < priv->rx_ring_num; ring_ind++) { + ring = &priv->rx_ring[ring_ind]; + + if (mlx4_en_prepare_rx_desc(priv, ring, + ring->actual_size)) { + if (ring->actual_size < MLX4_EN_MIN_RX_SIZE) { + mlx4_err(mdev, "Failed to allocate " + "enough rx buffers\n"); + return -ENOMEM; + } else { + if (netif_msg_rx_err(priv)) + mlx4_warn(mdev, + "Only %d buffers allocated\n", + ring->actual_size); + goto out; + } + } + ring->actual_size++; + ring->prod++; + } + } +out: + return 0; +} + +static int mlx4_en_fill_rx_buf(struct net_device *dev, + struct mlx4_en_rx_ring *ring) +{ + struct mlx4_en_priv *priv = netdev_priv(dev); + int num = 0; + int err; + + while ((u32) (ring->prod - ring->cons) < ring->actual_size) { + err = mlx4_en_prepare_rx_desc(priv, ring, ring->prod & + ring->size_mask); + if (err) { + if (netif_msg_rx_err(priv)) + mlx4_warn(priv->mdev, + "Failed preparing rx descriptor\n"); + priv->port_stats.rx_alloc_failed++; + break; + } + ++num; + ++ring->prod; + } + if ((u32) (ring->prod - ring->cons) == ring->size) + ring->full = 1; + + return num; +} + +static void mlx4_en_free_rx_buf(struct mlx4_en_priv *priv, + struct mlx4_en_rx_ring *ring) +{ + struct mlx4_en_dev *mdev = priv->mdev; + struct skb_frag_struct *skb_frags; + struct mlx4_en_rx_desc *rx_desc; + dma_addr_t dma; + int index; + int nr; + + mlx4_dbg(DRV, priv, "Freeing Rx buf - cons:%d prod:%d\n", + ring->cons, ring->prod); + + /* Unmap and free Rx buffers */ + BUG_ON((u32) (ring->prod - ring->cons) > ring->size); + while (ring->cons != ring->prod) { + index = ring->cons & ring->size_mask; + rx_desc = ring->buf + (index << ring->log_stride); + skb_frags = ring->rx_info + (index << priv->log_rx_info); + mlx4_dbg(DRV, priv, "Processing descriptor:%d\n", index); + + for (nr = 0; nr < priv->num_frags; nr++) { + mlx4_dbg(DRV, priv, "Freeing fragment:%d\n", nr); + dma = be64_to_cpu(rx_desc->data[nr].addr); + + mlx4_dbg(DRV, priv, "Unmaping buffer at dma:0x%llx\n", (u64) dma); + pci_unmap_single(mdev->pdev, dma, skb_frags[nr].size, + PCI_DMA_FROMDEVICE); + put_page(skb_frags[nr].page); + } + ++ring->cons; + } +} + + +void mlx4_en_rx_refill(struct work_struct *work) +{ + struct delayed_work *delay = container_of(work, struct delayed_work, work); + struct mlx4_en_priv *priv = container_of(delay, struct mlx4_en_priv, + refill_task); + struct mlx4_en_dev *mdev = priv->mdev; + struct net_device *dev = priv->dev; + struct mlx4_en_rx_ring *ring; + int need_refill = 0; + int i; + + mutex_lock(&mdev->state_lock); + if (!mdev->device_up || !priv->port_up) + goto out; + + /* We only get here if there are no receive buffers, so we can't race + * with Rx interrupts while filling buffers */ + for (i = 0; i < priv->rx_ring_num; i++) { + ring = &priv->rx_ring[i]; + if (ring->need_refill) { + if (mlx4_en_fill_rx_buf(dev, ring)) { + ring->need_refill = 0; + mlx4_en_update_rx_prod_db(ring); + } else + need_refill = 1; + } + } + if (need_refill) + queue_delayed_work(mdev->workqueue, &priv->refill_task, HZ); + +out: + mutex_unlock(&mdev->state_lock); +} + + +int mlx4_en_create_rx_ring(struct mlx4_en_priv *priv, + struct mlx4_en_rx_ring *ring, u32 size, u16 stride) +{ + struct mlx4_en_dev *mdev = priv->mdev; + int err; + int tmp; + + /* Sanity check SRQ size before proceeding */ + if (size >= mdev->dev->caps.max_srq_wqes) + return -EINVAL; + + ring->prod = 0; + ring->cons = 0; + ring->size = size; + ring->size_mask = size - 1; + ring->stride = stride; + ring->log_stride = ffs(ring->stride) - 1; + ring->buf_size = ring->size * ring->stride; + + tmp = size * roundup_pow_of_two(MLX4_EN_MAX_RX_FRAGS * + sizeof(struct skb_frag_struct)); + ring->rx_info = vmalloc(tmp); + if (!ring->rx_info) { + mlx4_err(mdev, "Failed allocating rx_info ring\n"); + return -ENOMEM; + } + mlx4_dbg(DRV, priv, "Allocated rx_info ring at addr:%p size:%d\n", + ring->rx_info, tmp); + + err = mlx4_alloc_hwq_res(mdev->dev, &ring->wqres, + ring->buf_size, 2 * PAGE_SIZE); + if (err) + goto err_ring; + + err = mlx4_en_map_buffer(&ring->wqres.buf); + if (err) { + mlx4_err(mdev, "Failed to map RX buffer\n"); + goto err_hwq; + } + ring->buf = ring->wqres.buf.direct.buf; + + /* Configure lro mngr */ + memset(&ring->lro, 0, sizeof(struct net_lro_mgr)); + ring->lro.dev = priv->dev; + ring->lro.features = LRO_F_NAPI; + ring->lro.frag_align_pad = NET_IP_ALIGN; + ring->lro.ip_summed = CHECKSUM_UNNECESSARY; + ring->lro.ip_summed_aggr = CHECKSUM_UNNECESSARY; + ring->lro.max_desc = mdev->profile.num_lro; + ring->lro.max_aggr = MAX_SKB_FRAGS; + ring->lro.lro_arr = kzalloc(mdev->profile.num_lro * + sizeof(struct net_lro_desc), + GFP_KERNEL); + if (!ring->lro.lro_arr) { + mlx4_err(mdev, "Failed to allocate lro array\n"); + goto err_map; + } + ring->lro.get_frag_header = mlx4_en_get_frag_header; + + return 0; + +err_map: + mlx4_en_unmap_buffer(&ring->wqres.buf); +err_hwq: + mlx4_free_hwq_res(mdev->dev, &ring->wqres, ring->buf_size); +err_ring: + vfree(ring->rx_info); + ring->rx_info = NULL; + return err; +} + +int mlx4_en_activate_rx_rings(struct mlx4_en_priv *priv) +{ + struct mlx4_en_dev *mdev = priv->mdev; + struct mlx4_wqe_srq_next_seg *next; + struct mlx4_en_rx_ring *ring; + int i; + int ring_ind; + int err; + int stride = roundup_pow_of_two(sizeof(struct mlx4_en_rx_desc) + + DS_SIZE * priv->num_frags); + int max_gs = (stride - sizeof(struct mlx4_wqe_srq_next_seg)) / DS_SIZE; + + for (ring_ind = 0; ring_ind < priv->rx_ring_num; ring_ind++) { + ring = &priv->rx_ring[ring_ind]; + + ring->prod = 0; + ring->cons = 0; + ring->actual_size = 0; + ring->cqn = priv->rx_cq[ring_ind].mcq.cqn; + + ring->stride = stride; + ring->log_stride = ffs(ring->stride) - 1; + ring->buf_size = ring->size * ring->stride; + + memset(ring->buf, 0, ring->buf_size); + mlx4_en_update_rx_prod_db(ring); + + /* Initailize all descriptors */ + for (i = 0; i < ring->size; i++) + mlx4_en_init_rx_desc(priv, ring, i); + + /* Initialize page allocators */ + err = mlx4_en_init_allocator(priv, ring); + if (err) { + mlx4_err(mdev, "Failed initializing ring allocator\n"); + goto err_allocator; + } + + /* Fill Rx buffers */ + ring->full = 0; + } + if (mlx4_en_fill_rx_buffers(priv)) + goto err_buffers; + + for (ring_ind = 0; ring_ind < priv->rx_ring_num; ring_ind++) { + ring = &priv->rx_ring[ring_ind]; + + mlx4_en_update_rx_prod_db(ring); + + /* Configure SRQ representing the ring */ + ring->srq.max = ring->size; + ring->srq.max_gs = max_gs; + ring->srq.wqe_shift = ilog2(ring->stride); + + for (i = 0; i < ring->srq.max; ++i) { + next = get_wqe(ring, i); + next->next_wqe_index = + cpu_to_be16((i + 1) & (ring->srq.max - 1)); + } + + err = mlx4_srq_alloc(mdev->dev, mdev->priv_pdn, &ring->wqres.mtt, + ring->wqres.db.dma, &ring->srq); + if (err){ + mlx4_err(mdev, "Failed to allocate srq\n"); + goto err_srq; + } + ring->srq.event = mlx4_en_srq_event; + } + + return 0; + +err_srq: + while (ring_ind >= 0) { + ring = &priv->rx_ring[ring_ind]; + mlx4_srq_free(mdev->dev, &ring->srq); + ring_ind--; + } + +err_buffers: + for (ring_ind = 0; ring_ind < priv->rx_ring_num; ring_ind++) + mlx4_en_free_rx_buf(priv, &priv->rx_ring[ring_ind]); + + ring_ind = priv->rx_ring_num - 1; +err_allocator: + while (ring_ind >= 0) { + mlx4_en_destroy_allocator(priv, &priv->rx_ring[ring_ind]); + ring_ind--; + } + return err; +} + +void mlx4_en_destroy_rx_ring(struct mlx4_en_priv *priv, + struct mlx4_en_rx_ring *ring) +{ + struct mlx4_en_dev *mdev = priv->mdev; + + kfree(ring->lro.lro_arr); + mlx4_en_unmap_buffer(&ring->wqres.buf); + mlx4_free_hwq_res(mdev->dev, &ring->wqres, ring->buf_size); + vfree(ring->rx_info); + ring->rx_info = NULL; +} + +void mlx4_en_deactivate_rx_ring(struct mlx4_en_priv *priv, + struct mlx4_en_rx_ring *ring) +{ + struct mlx4_en_dev *mdev = priv->mdev; + + mlx4_srq_free(mdev->dev, &ring->srq); + mlx4_en_free_rx_buf(priv, ring); + mlx4_en_destroy_allocator(priv, ring); +} + + +/* Unmap a completed descriptor and free unused pages */ +static int mlx4_en_complete_rx_desc(struct mlx4_en_priv *priv, + struct mlx4_en_rx_desc *rx_desc, + struct skb_frag_struct *skb_frags, + struct skb_frag_struct *skb_frags_rx, + struct mlx4_en_rx_alloc *page_alloc, + int length) +{ + struct mlx4_en_dev *mdev = priv->mdev; + struct mlx4_en_frag_info *frag_info; + int nr; + dma_addr_t dma; + + /* Collect used fragments while replacing them in the HW descirptors */ + for (nr = 0; nr < priv->num_frags; nr++) { + frag_info = &priv->frag_info[nr]; + if (length <= frag_info->frag_prefix_size) + break; + + /* Save page reference in skb */ + skb_frags_rx[nr].page = skb_frags[nr].page; + skb_frags_rx[nr].size = skb_frags[nr].size; + skb_frags_rx[nr].page_offset = skb_frags[nr].page_offset; + dma = be64_to_cpu(rx_desc->data[nr].addr); + + /* Allocate a replacement page */ + if (mlx4_en_alloc_frag(priv, rx_desc, skb_frags, page_alloc, nr)) + goto fail; + + /* Unmap buffer */ + pci_unmap_single(mdev->pdev, dma, skb_frags[nr].size, + PCI_DMA_FROMDEVICE); + } + /* Adjust size of last fragment to match actual length */ + skb_frags_rx[nr - 1].size = length - + priv->frag_info[nr - 1].frag_prefix_size; + return nr; + +fail: + /* Drop all accumulated fragments (which have already been replaced in + * the descriptor) of this packet; remaining fragments are reused... */ + while (nr > 0) { + nr--; + put_page(skb_frags_rx[nr].page); + } + return 0; +} + + +static struct sk_buff *mlx4_en_rx_skb(struct mlx4_en_priv *priv, + struct mlx4_en_rx_desc *rx_desc, + struct skb_frag_struct *skb_frags, + struct mlx4_en_rx_alloc *page_alloc, + unsigned int length) +{ + struct mlx4_en_dev *mdev = priv->mdev; + struct sk_buff *skb; + void *va; + int used_frags; + dma_addr_t dma; + + skb = dev_alloc_skb(SMALL_PACKET_SIZE + NET_IP_ALIGN); + if (!skb) { + mlx4_dbg(RX_ERR, priv, "Failed allocating skb\n"); + return NULL; + } + skb->dev = priv->dev; + skb_reserve(skb, NET_IP_ALIGN); + skb->len = length; + skb->truesize = length + sizeof(struct sk_buff); + + /* Get pointer to first fragment so we could copy the headers into the + * (linear part of the) skb */ + va = page_address(skb_frags[0].page) + skb_frags[0].page_offset; + + if (length <= SMALL_PACKET_SIZE) { + /* We are copying all relevant data to the skb - temporarily + * synch buffers for the copy */ + dma = be64_to_cpu(rx_desc->data[0].addr); + dma_sync_single_range_for_cpu(&mdev->pdev->dev, dma, 0, + length, DMA_FROM_DEVICE); + skb_copy_to_linear_data(skb, va, length); + dma_sync_single_range_for_device(&mdev->pdev->dev, dma, 0, + length, DMA_FROM_DEVICE); + skb->tail += length; + } else { + + /* Move relevant fragments to skb */ + used_frags = mlx4_en_complete_rx_desc(priv, rx_desc, skb_frags, + skb_shinfo(skb)->frags, + page_alloc, length); + skb_shinfo(skb)->nr_frags = used_frags; + + /* Copy headers into the skb linear buffer */ + memcpy(skb->data, va, HEADER_COPY_SIZE); + skb->tail += HEADER_COPY_SIZE; + + /* Skip headers in first fragment */ + skb_shinfo(skb)->frags[0].page_offset += HEADER_COPY_SIZE; + + /* Adjust size of first fragment */ + skb_shinfo(skb)->frags[0].size -= HEADER_COPY_SIZE; + skb->data_len = length - HEADER_COPY_SIZE; + } + return skb; +} + +static void mlx4_en_copy_desc(struct mlx4_en_priv *priv, + struct mlx4_en_rx_ring *ring, + int from, int to, int num) +{ + struct skb_frag_struct *skb_frags_from; + struct skb_frag_struct *skb_frags_to; + struct mlx4_en_rx_desc *rx_desc_from; + struct mlx4_en_rx_desc *rx_desc_to; + int from_index, to_index; + int nr, i; + + for (i = 0; i < num; i++) { + from_index = (from + i) & ring->size_mask; + to_index = (to + i) & ring->size_mask; + skb_frags_from = ring->rx_info + (from_index << priv->log_rx_info); + skb_frags_to = ring->rx_info + (to_index << priv->log_rx_info); + rx_desc_from = ring->buf + (from_index << ring->log_stride); + rx_desc_to = ring->buf + (to_index << ring->log_stride); + + for (nr = 0; nr < priv->num_frags; nr++) { + skb_frags_to[nr].page = skb_frags_from[nr].page; + skb_frags_to[nr].page_offset = skb_frags_from[nr].page_offset; + rx_desc_to->data[nr].addr = rx_desc_from->data[nr].addr; + } + } +} + + +int mlx4_en_process_rx_cq(struct net_device *dev, struct mlx4_en_cq *cq, int budget) +{ + struct mlx4_en_priv *priv = netdev_priv(dev); + struct mlx4_en_dev *mdev = priv->mdev; + struct mlx4_cqe *cqe; + struct mlx4_en_rx_ring *ring = &priv->rx_ring[cq->ring]; + struct skb_frag_struct *skb_frags; + struct skb_frag_struct lro_frags[MLX4_EN_MAX_RX_FRAGS]; + struct mlx4_en_rx_desc *rx_desc; + struct sk_buff *skb; + int index; + int nr; + unsigned int length; + int polled = 0; + int ip_summed; + + if (!priv->port_up) + return 0; + + /* We assume a 1:1 mapping between CQEs and Rx descriptors, so Rx + * descriptor offset can be deduced from the CQE index instead of + * reading 'cqe->index' */ + index = cq->mcq.cons_index & ring->size_mask; + cqe = &cq->buf[index]; + + /* Process all completed CQEs */ + while (XNOR(cqe->owner_sr_opcode & MLX4_CQE_OWNER_MASK, + cq->mcq.cons_index & cq->size)) { + + skb_frags = ring->rx_info + (index << priv->log_rx_info); + rx_desc = ring->buf + (index << ring->log_stride); + + /* + * make sure we read the CQE after we read the ownership bit + */ + rmb(); + + /* Drop packet on bad receive or bad checksum */ + if (unlikely((cqe->owner_sr_opcode & MLX4_CQE_OPCODE_MASK) == + MLX4_CQE_OPCODE_ERROR)) { + mlx4_err(mdev, "CQE completed in error - vendor " + "syndrom:%d syndrom:%d\n", + ((struct mlx4_err_cqe *) cqe)->vendor_err_syndrome, + ((struct mlx4_err_cqe *) cqe)->syndrome); + goto next; + } + if (unlikely(cqe->badfcs_enc & MLX4_CQE_BAD_FCS)) { + mlx4_dbg(RX_ERR, priv, "Accepted frame with bad FCS\n"); + goto next; + } + + /* + * Packet is OK - process it. + */ + length = be32_to_cpu(cqe->byte_cnt); + ring->bytes += length; + ring->packets++; + + if (likely(priv->rx_csum)) { + if ((cqe->status & cpu_to_be16(MLX4_CQE_STATUS_IPOK)) && + (cqe->checksum == cpu_to_be16(0xffff))) { + priv->port_stats.rx_chksum_good++; + /* This packet is eligible for LRO if it is: + * - DIX Ethernet (type interpretation) + * - TCP/IP (v4) + * - without IP options + * - not an IP fragment */ + if (mlx4_en_can_lro(cqe->status) && + dev->features & NETIF_F_LRO) { + + nr = mlx4_en_complete_rx_desc( + priv, rx_desc, + skb_frags, lro_frags, + ring->page_alloc, length); + if (!nr) + goto next; + + if (priv->vlgrp && (cqe->vlan_my_qpn & + cpu_to_be32(MLX4_CQE_VLAN_PRESENT_MASK))) { + lro_vlan_hwaccel_receive_frags( + &ring->lro, lro_frags, + length, length, + priv->vlgrp, + be16_to_cpu(cqe->sl_vid), + NULL, 0); + } else + lro_receive_frags(&ring->lro, + lro_frags, + length, + length, + NULL, 0); + + goto next; + } + + /* LRO not possible, complete processing here */ + ip_summed = CHECKSUM_UNNECESSARY; + INC_PERF_COUNTER(priv->pstats.lro_misses); + } else { + ip_summed = CHECKSUM_NONE; + priv->port_stats.rx_chksum_none++; + } + } else { + ip_summed = CHECKSUM_NONE; + priv->port_stats.rx_chksum_none++; + } + + skb = mlx4_en_rx_skb(priv, rx_desc, skb_frags, + ring->page_alloc, length); + if (!skb) { + priv->stats.rx_dropped++; + goto next; + } + + skb->ip_summed = ip_summed; + skb->protocol = eth_type_trans(skb, dev); + + /* Push it up the stack */ + if (priv->vlgrp && (be32_to_cpu(cqe->vlan_my_qpn) & + MLX4_CQE_VLAN_PRESENT_MASK)) { + vlan_hwaccel_receive_skb(skb, priv->vlgrp, + be16_to_cpu(cqe->sl_vid)); + } else + netif_receive_skb(skb); + + dev->last_rx = jiffies; + +next: + ++cq->mcq.cons_index; + index = (cq->mcq.cons_index) & ring->size_mask; + cqe = &cq->buf[index]; + if (++polled == budget) { + /* We are here because we reached the NAPI budget - + * flush only pending LRO sessions */ + lro_flush_all(&ring->lro); + goto out; + } + } + + /* If CQ is empty flush all LRO sessions unconditionally */ + lro_flush_all(&ring->lro); + +out: + AVG_PERF_COUNTER(priv->pstats.rx_coal_avg, polled); + mlx4_cq_set_ci(&cq->mcq); + wmb(); /* ensure HW sees CQ consumer before we post new buffers */ + ring->cons = cq->mcq.cons_index; + ring->prod += polled; /* Polled descriptors were realocated in place */ + if (unlikely(!ring->full)) { + mlx4_en_copy_desc(priv, ring, ring->cons - polled, + ring->prod - polled, polled); + mlx4_en_fill_rx_buf(dev, ring); + } + mlx4_en_update_rx_prod_db(ring); + return polled; +} + + +void mlx4_en_rx_irq(struct mlx4_cq *mcq) +{ + struct mlx4_en_cq *cq = container_of(mcq, struct mlx4_en_cq, mcq); + struct mlx4_en_priv *priv = netdev_priv(cq->dev); + + if (priv->port_up) + netif_rx_schedule(cq->dev, &cq->napi); + else + mlx4_en_arm_cq(priv, cq); +} + +/* Rx CQ polling - called by NAPI */ +int mlx4_en_poll_rx_cq(struct napi_struct *napi, int budget) +{ + struct mlx4_en_cq *cq = container_of(napi, struct mlx4_en_cq, napi); + struct net_device *dev = cq->dev; + struct mlx4_en_priv *priv = netdev_priv(dev); + int done; + + done = mlx4_en_process_rx_cq(dev, cq, budget); + + /* If we used up all the quota - we're probably not done yet... */ + if (done == budget) + INC_PERF_COUNTER(priv->pstats.napi_quota); + else { + /* Done for now */ + netif_rx_complete(dev, napi); + mlx4_en_arm_cq(priv, cq); + } + return done; +} + + +/* Calculate the last offset position that accomodates a full fragment + * (assuming fagment size = stride-align) */ +static int mlx4_en_last_alloc_offset(struct mlx4_en_priv *priv, u16 stride, u16 align) +{ + u16 res = MLX4_EN_ALLOC_SIZE % stride; + u16 offset = MLX4_EN_ALLOC_SIZE - stride - res + align; + + mlx4_dbg(DRV, priv, "Calculated last offset for stride:%d align:%d " + "res:%d offset:%d\n", stride, align, res, offset); + return offset; +} + + +static int frag_sizes[] = { + FRAG_SZ0, + FRAG_SZ1, + FRAG_SZ2, + FRAG_SZ3 +}; + +void mlx4_en_calc_rx_buf(struct net_device *dev) +{ + struct mlx4_en_priv *priv = netdev_priv(dev); + int eff_mtu = dev->mtu + ETH_HLEN + VLAN_HLEN + ETH_LLC_SNAP_SIZE; + int buf_size = 0; + int i = 0; + + while (buf_size < eff_mtu) { + priv->frag_info[i].frag_size = + (eff_mtu > buf_size + frag_sizes[i]) ? + frag_sizes[i] : eff_mtu - buf_size; + priv->frag_info[i].frag_prefix_size = buf_size; + if (!i) { + priv->frag_info[i].frag_align = NET_IP_ALIGN; + priv->frag_info[i].frag_stride = + ALIGN(frag_sizes[i] + NET_IP_ALIGN, SMP_CACHE_BYTES); + } else { + priv->frag_info[i].frag_align = 0; + priv->frag_info[i].frag_stride = + ALIGN(frag_sizes[i], SMP_CACHE_BYTES); + } + priv->frag_info[i].last_offset = mlx4_en_last_alloc_offset( + priv, priv->frag_info[i].frag_stride, + priv->frag_info[i].frag_align); + buf_size += priv->frag_info[i].frag_size; + i++; + } + + priv->num_frags = i; + priv->rx_skb_size = eff_mtu; + priv->log_rx_info = ROUNDUP_LOG2(i * sizeof(struct skb_frag_struct)); + + mlx4_dbg(DRV, priv, "Rx buffer scatter-list (effective-mtu:%d " + "num_frags:%d):\n", eff_mtu, priv->num_frags); + for (i = 0; i < priv->num_frags; i++) { + mlx4_dbg(DRV, priv, " frag:%d - size:%d prefix:%d align:%d " + "stride:%d last_offset:%d\n", i, + priv->frag_info[i].frag_size, + priv->frag_info[i].frag_prefix_size, + priv->frag_info[i].frag_align, + priv->frag_info[i].frag_stride, + priv->frag_info[i].last_offset); + } +} + +/* RSS related functions */ + +/* Calculate rss size and map each entry in rss table to rx ring */ +void mlx4_en_set_default_rss_map(struct mlx4_en_priv *priv, + struct mlx4_en_rss_map *rss_map, + int num_entries, int num_rings) +{ + int i; + + rss_map->size = roundup_pow_of_two(num_entries); + mlx4_dbg(DRV, priv, "Setting default RSS map of %d entires\n", + rss_map->size); + + for (i = 0; i < rss_map->size; i++) { + rss_map->map[i] = i % num_rings; + mlx4_dbg(DRV, priv, "Entry %d ---> ring %d\n", i, rss_map->map[i]); + } +} + +static void mlx4_en_sqp_event(struct mlx4_qp *qp, enum mlx4_event event) +{ + return; +} + + +static int mlx4_en_config_rss_qp(struct mlx4_en_priv *priv, + int qpn, int srqn, int cqn, + enum mlx4_qp_state *state, + struct mlx4_qp *qp) +{ + struct mlx4_en_dev *mdev = priv->mdev; + struct mlx4_qp_context *context; + int err = 0; + + context = kmalloc(sizeof *context , GFP_KERNEL); + if (!context) { + mlx4_err(mdev, "Failed to allocate qp context\n"); + return -ENOMEM; + } + + err = mlx4_qp_alloc(mdev->dev, qpn, qp); + if (err) { + mlx4_err(mdev, "Failed to allocate qp #%d\n", qpn); + goto out; + return err; + } + qp->event = mlx4_en_sqp_event; + + memset(context, 0, sizeof *context); + mlx4_en_fill_qp_context(priv, 0, 0, 0, 0, qpn, cqn, srqn, context); + + err = mlx4_qp_to_ready(mdev->dev, &priv->res.mtt, context, qp, state); + if (err) { + mlx4_qp_remove(mdev->dev, qp); + mlx4_qp_free(mdev->dev, qp); + } +out: + kfree(context); + return err; +} + +/* Allocate rx qp's and configure them according to rss map */ +int mlx4_en_config_rss_steer(struct mlx4_en_priv *priv) +{ + struct mlx4_en_dev *mdev = priv->mdev; + struct mlx4_en_rss_map *rss_map = &priv->rss_map; + struct mlx4_qp_context context; + struct mlx4_en_rss_context *rss_context; + void *ptr; + int rss_xor = mdev->profile.rss_xor; + u8 rss_mask = mdev->profile.rss_mask; + int i, srqn, qpn, cqn; + int err = 0; + int good_qps = 0; + + mlx4_dbg(DRV, priv, "Configuring rss steering for port %u\n", priv->port); + err = mlx4_qp_reserve_range(mdev->dev, rss_map->size, + rss_map->size, &rss_map->base_qpn); + if (err) { + mlx4_err(mdev, "Failed reserving %d qps for port %u\n", + rss_map->size, priv->port); + return err; + } + + for (i = 0; i < rss_map->size; i++) { + cqn = priv->rx_ring[rss_map->map[i]].cqn; + srqn = priv->rx_ring[rss_map->map[i]].srq.srqn; + qpn = rss_map->base_qpn + i; + err = mlx4_en_config_rss_qp(priv, qpn, srqn, cqn, + &rss_map->state[i], + &rss_map->qps[i]); + if (err) + goto rss_err; + + ++good_qps; + } + + /* Configure RSS indirection qp */ + err = mlx4_qp_reserve_range(mdev->dev, 1, 1, &priv->base_qpn); + if (err) { + mlx4_err(mdev, "Failed to reserve range for RSS " + "indirection qp\n"); + goto rss_err; + } + err = mlx4_qp_alloc(mdev->dev, priv->base_qpn, &rss_map->indir_qp); + if (err) { + mlx4_err(mdev, "Failed to allocate RSS indirection QP\n"); + goto reserve_err; + } + rss_map->indir_qp.event = mlx4_en_sqp_event; + mlx4_en_fill_qp_context(priv, 0, 0, 0, 1, priv->base_qpn, + priv->rx_ring[0].cqn, 0, &context); + + ptr = ((void *) &context) + 0x3c; + rss_context = (struct mlx4_en_rss_context *) ptr; + rss_context->base_qpn = cpu_to_be32(ilog2(rss_map->size) << 24 | + (rss_map->base_qpn)); + rss_context->default_qpn = cpu_to_be32(rss_map->base_qpn); + rss_context->hash_fn = rss_xor & 0x3; + rss_context->flags = rss_mask << 2; + + err = mlx4_qp_to_ready(mdev->dev, &priv->res.mtt, &context, + &rss_map->indir_qp, &rss_map->indir_state); + if (err) + goto indir_err; + + return 0; + +indir_err: + mlx4_qp_modify(mdev->dev, NULL, rss_map->indir_state, + MLX4_QP_STATE_RST, NULL, 0, 0, &rss_map->indir_qp); + mlx4_qp_remove(mdev->dev, &rss_map->indir_qp); + mlx4_qp_free(mdev->dev, &rss_map->indir_qp); +reserve_err: + mlx4_qp_release_range(mdev->dev, priv->base_qpn, 1); +rss_err: + for (i = 0; i < good_qps; i++) { + mlx4_qp_modify(mdev->dev, NULL, rss_map->state[i], + MLX4_QP_STATE_RST, NULL, 0, 0, &rss_map->qps[i]); + mlx4_qp_remove(mdev->dev, &rss_map->qps[i]); + mlx4_qp_free(mdev->dev, &rss_map->qps[i]); + } + mlx4_qp_release_range(mdev->dev, rss_map->base_qpn, rss_map->size); + return err; +} + +void mlx4_en_release_rss_steer(struct mlx4_en_priv *priv) +{ + struct mlx4_en_dev *mdev = priv->mdev; + struct mlx4_en_rss_map *rss_map = &priv->rss_map; + int i; + + mlx4_qp_modify(mdev->dev, NULL, rss_map->indir_state, + MLX4_QP_STATE_RST, NULL, 0, 0, &rss_map->indir_qp); + mlx4_qp_remove(mdev->dev, &rss_map->indir_qp); + mlx4_qp_free(mdev->dev, &rss_map->indir_qp); + mlx4_qp_release_range(mdev->dev, priv->base_qpn, 1); + + for (i = 0; i < rss_map->size; i++) { + mlx4_qp_modify(mdev->dev, NULL, rss_map->state[i], + MLX4_QP_STATE_RST, NULL, 0, 0, &rss_map->qps[i]); + mlx4_qp_remove(mdev->dev, &rss_map->qps[i]); + mlx4_qp_free(mdev->dev, &rss_map->qps[i]); + } + mlx4_qp_release_range(mdev->dev, rss_map->base_qpn, rss_map->size); +} + + + + + diff --git a/drivers/net/mlx4/en_tx.c b/drivers/net/mlx4/en_tx.c new file mode 100644 index 000000000000..8592f8fb8475 --- /dev/null +++ b/drivers/net/mlx4/en_tx.c @@ -0,0 +1,820 @@ +/* + * Copyright (c) 2007 Mellanox Technologies. All rights reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the + * OpenIB.org BSD license below: + * + * Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * - Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * + * - Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + * + */ + +#include <asm/page.h> +#include <linux/mlx4/cq.h> +#include <linux/mlx4/qp.h> +#include <linux/skbuff.h> +#include <linux/if_vlan.h> +#include <linux/vmalloc.h> + +#include "mlx4_en.h" + +enum { + MAX_INLINE = 104, /* 128 - 16 - 4 - 4 */ +}; + +static int inline_thold __read_mostly = MAX_INLINE; + +module_param_named(inline_thold, inline_thold, int, 0444); +MODULE_PARM_DESC(inline_thold, "treshold for using inline data"); + +int mlx4_en_create_tx_ring(struct mlx4_en_priv *priv, + struct mlx4_en_tx_ring *ring, u32 size, + u16 stride) +{ + struct mlx4_en_dev *mdev = priv->mdev; + int tmp; + int err; + + ring->size = size; + ring->size_mask = size - 1; + ring->stride = stride; + + inline_thold = min(inline_thold, MAX_INLINE); + + spin_lock_init(&ring->comp_lock); + + tmp = size * sizeof(struct mlx4_en_tx_info); + ring->tx_info = vmalloc(tmp); + if (!ring->tx_info) { + mlx4_err(mdev, "Failed allocating tx_info ring\n"); + return -ENOMEM; + } + mlx4_dbg(DRV, priv, "Allocated tx_info ring at addr:%p size:%d\n", + ring->tx_info, tmp); + + ring->bounce_buf = kmalloc(MAX_DESC_SIZE, GFP_KERNEL); + if (!ring->bounce_buf) { + mlx4_err(mdev, "Failed allocating bounce buffer\n"); + err = -ENOMEM; + goto err_tx; + } + ring->buf_size = ALIGN(size * ring->stride, MLX4_EN_PAGE_SIZE); + + err = mlx4_alloc_hwq_res(mdev->dev, &ring->wqres, ring->buf_size, + 2 * PAGE_SIZE); + if (err) { + mlx4_err(mdev, "Failed allocating hwq resources\n"); + goto err_bounce; + } + + err = mlx4_en_map_buffer(&ring->wqres.buf); + if (err) { + mlx4_err(mdev, "Failed to map TX buffer\n"); + goto err_hwq_res; + } + + ring->buf = ring->wqres.buf.direct.buf; + + mlx4_dbg(DRV, priv, "Allocated TX ring (addr:%p) - buf:%p size:%d " + "buf_size:%d dma:%llx\n", ring, ring->buf, ring->size, + ring->buf_size, (unsigned long long) ring->wqres.buf.direct.map); + + err = mlx4_qp_reserve_range(mdev->dev, 1, 1, &ring->qpn); + if (err) { + mlx4_err(mdev, "Failed reserving qp for tx ring.\n"); + goto err_map; + } + + err = mlx4_qp_alloc(mdev->dev, ring->qpn, &ring->qp); + if (err) { + mlx4_err(mdev, "Failed allocating qp %d\n", ring->qpn); + goto err_reserve; + } + + return 0; + +err_reserve: + mlx4_qp_release_range(mdev->dev, ring->qpn, 1); +err_map: + mlx4_en_unmap_buffer(&ring->wqres.buf); +err_hwq_res: + mlx4_free_hwq_res(mdev->dev, &ring->wqres, ring->buf_size); +err_bounce: + kfree(ring->bounce_buf); + ring->bounce_buf = NULL; +err_tx: + vfree(ring->tx_info); + ring->tx_info = NULL; + return err; +} + +void mlx4_en_destroy_tx_ring(struct mlx4_en_priv *priv, + struct mlx4_en_tx_ring *ring) +{ + struct mlx4_en_dev *mdev = priv->mdev; + mlx4_dbg(DRV, priv, "Destroying tx ring, qpn: %d\n", ring->qpn); + + mlx4_qp_remove(mdev->dev, &ring->qp); + mlx4_qp_free(mdev->dev, &ring->qp); + mlx4_qp_release_range(mdev->dev, ring->qpn, 1); + mlx4_en_unmap_buffer(&ring->wqres.buf); + mlx4_free_hwq_res(mdev->dev, &ring->wqres, ring->buf_size); + kfree(ring->bounce_buf); + ring->bounce_buf = NULL; + vfree(ring->tx_info); + ring->tx_info = NULL; +} + +int mlx4_en_activate_tx_ring(struct mlx4_en_priv *priv, + struct mlx4_en_tx_ring *ring, + int cq, int srqn) +{ + struct mlx4_en_dev *mdev = priv->mdev; + int err; + + ring->cqn = cq; + ring->prod = 0; + ring->cons = 0xffffffff; + ring->last_nr_txbb = 1; + ring->poll_cnt = 0; + ring->blocked = 0; + memset(ring->tx_info, 0, ring->size * sizeof(struct mlx4_en_tx_info)); + memset(ring->buf, 0, ring->buf_size); + + ring->qp_state = MLX4_QP_STATE_RST; + ring->doorbell_qpn = swab32(ring->qp.qpn << 8); + + mlx4_en_fill_qp_context(priv, ring->size, ring->stride, 1, 0, ring->qpn, + ring->cqn, srqn, &ring->context); + + err = mlx4_qp_to_ready(mdev->dev, &ring->wqres.mtt, &ring->context, + &ring->qp, &ring->qp_state); + + return err; +} + +void mlx4_en_deactivate_tx_ring(struct mlx4_en_priv *priv, + struct mlx4_en_tx_ring *ring) +{ + struct mlx4_en_dev *mdev = priv->mdev; + + mlx4_qp_modify(mdev->dev, NULL, ring->qp_state, + MLX4_QP_STATE_RST, NULL, 0, 0, &ring->qp); +} + + +static u32 mlx4_en_free_tx_desc(struct mlx4_en_priv *priv, + struct mlx4_en_tx_ring *ring, + int index, u8 owner) +{ + struct mlx4_en_dev *mdev = priv->mdev; + struct mlx4_en_tx_info *tx_info = &ring->tx_info[index]; + struct mlx4_en_tx_desc *tx_desc = ring->buf + index * TXBB_SIZE; + struct mlx4_wqe_data_seg *data = (void *) tx_desc + tx_info->data_offset; + struct sk_buff *skb = tx_info->skb; + struct skb_frag_struct *frag; + void *end = ring->buf + ring->buf_size; + int frags = skb_shinfo(skb)->nr_frags; + int i; + __be32 *ptr = (__be32 *)tx_desc; + __be32 stamp = cpu_to_be32(STAMP_VAL | (!!owner << STAMP_SHIFT)); + + /* Optimize the common case when there are no wraparounds */ + if (likely((void *) tx_desc + tx_info->nr_txbb * TXBB_SIZE <= end)) { + if (tx_info->linear) { + pci_unmap_single(mdev->pdev, + (dma_addr_t) be64_to_cpu(data->addr), + be32_to_cpu(data->byte_count), + PCI_DMA_TODEVICE); + ++data; + } + + for (i = 0; i < frags; i++) { + frag = &skb_shinfo(skb)->frags[i]; + pci_unmap_page(mdev->pdev, + (dma_addr_t) be64_to_cpu(data[i].addr), + frag->size, PCI_DMA_TODEVICE); + } + /* Stamp the freed descriptor */ + for (i = 0; i < tx_info->nr_txbb * TXBB_SIZE; i += STAMP_STRIDE) { + *ptr = stamp; + ptr += STAMP_DWORDS; + } + + } else { + if ((void *) data >= end) { + data = (struct mlx4_wqe_data_seg *) + (ring->buf + ((void *) data - end)); + } + + if (tx_info->linear) { + pci_unmap_single(mdev->pdev, + (dma_addr_t) be64_to_cpu(data->addr), + be32_to_cpu(data->byte_count), + PCI_DMA_TODEVICE); + ++data; + } + + for (i = 0; i < frags; i++) { + /* Check for wraparound before unmapping */ + if ((void *) data >= end) + data = (struct mlx4_wqe_data_seg *) ring->buf; + frag = &skb_shinfo(skb)->frags[i]; + pci_unmap_page(mdev->pdev, + (dma_addr_t) be64_to_cpu(data->addr), + frag->size, PCI_DMA_TODEVICE); + } + /* Stamp the freed descriptor */ + for (i = 0; i < tx_info->nr_txbb * TXBB_SIZE; i += STAMP_STRIDE) { + *ptr = stamp; + ptr += STAMP_DWORDS; + if ((void *) ptr >= end) { + ptr = ring->buf; + stamp ^= cpu_to_be32(0x80000000); + } + } + + } + dev_kfree_skb_any(skb); + return tx_info->nr_txbb; +} + + +int mlx4_en_free_tx_buf(struct net_device *dev, struct mlx4_en_tx_ring *ring) +{ + struct mlx4_en_priv *priv = netdev_priv(dev); + int cnt = 0; + + /* Skip last polled descriptor */ + ring->cons += ring->last_nr_txbb; + mlx4_dbg(DRV, priv, "Freeing Tx buf - cons:0x%x prod:0x%x\n", + ring->cons, ring->prod); + + if ((u32) (ring->prod - ring->cons) > ring->size) { + if (netif_msg_tx_err(priv)) + mlx4_warn(priv->mdev, "Tx consumer passed producer!\n"); + return 0; + } + + while (ring->cons != ring->prod) { + ring->last_nr_txbb = mlx4_en_free_tx_desc(priv, ring, + ring->cons & ring->size_mask, + !!(ring->cons & ring->size)); + ring->cons += ring->last_nr_txbb; + cnt++; + } + + if (cnt) + mlx4_dbg(DRV, priv, "Freed %d uncompleted tx descriptors\n", cnt); + + return cnt; +} + +void mlx4_en_set_prio_map(struct mlx4_en_priv *priv, u16 *prio_map, u32 ring_num) +{ + int block = 8 / ring_num; + int extra = 8 - (block * ring_num); + int num = 0; + u16 ring = 1; + int prio; + + if (ring_num == 1) { + for (prio = 0; prio < 8; prio++) + prio_map[prio] = 0; + return; + } + + for (prio = 0; prio < 8; prio++) { + if (extra && (num == block + 1)) { + ring++; + num = 0; + extra--; + } else if (!extra && (num == block)) { + ring++; + num = 0; + } + prio_map[prio] = ring; + mlx4_dbg(DRV, priv, " prio:%d --> ring:%d\n", prio, ring); + num++; + } +} + +static void mlx4_en_process_tx_cq(struct net_device *dev, struct mlx4_en_cq *cq) +{ + struct mlx4_en_priv *priv = netdev_priv(dev); + struct mlx4_cq *mcq = &cq->mcq; + struct mlx4_en_tx_ring *ring = &priv->tx_ring[cq->ring]; + struct mlx4_cqe *cqe = cq->buf; + u16 index; + u16 new_index; + u32 txbbs_skipped = 0; + u32 cq_last_sav; + + /* index always points to the first TXBB of the last polled descriptor */ + index = ring->cons & ring->size_mask; + new_index = be16_to_cpu(cqe->wqe_index) & ring->size_mask; + if (index == new_index) + return; + + if (!priv->port_up) + return; + + /* + * We use a two-stage loop: + * - the first samples the HW-updated CQE + * - the second frees TXBBs until the last sample + * This lets us amortize CQE cache misses, while still polling the CQ + * until is quiescent. + */ + cq_last_sav = mcq->cons_index; + do { + do { + /* Skip over last polled CQE */ + index = (index + ring->last_nr_txbb) & ring->size_mask; + txbbs_skipped += ring->last_nr_txbb; + + /* Poll next CQE */ + ring->last_nr_txbb = mlx4_en_free_tx_desc( + priv, ring, index, + !!((ring->cons + txbbs_skipped) & + ring->size)); + ++mcq->cons_index; + + } while (index != new_index); + + new_index = be16_to_cpu(cqe->wqe_index) & ring->size_mask; + } while (index != new_index); + AVG_PERF_COUNTER(priv->pstats.tx_coal_avg, + (u32) (mcq->cons_index - cq_last_sav)); + + /* + * To prevent CQ overflow we first update CQ consumer and only then + * the ring consumer. + */ + mlx4_cq_set_ci(mcq); + wmb(); + ring->cons += txbbs_skipped; + + /* Wakeup Tx queue if this ring stopped it */ + if (unlikely(ring->blocked)) { + if (((u32) (ring->prod - ring->cons) <= + ring->size - HEADROOM - MAX_DESC_TXBBS) && !cq->armed) { + + /* TODO: support multiqueue netdevs. Currently, we block + * when *any* ring is full. Note that: + * - 2 Tx rings can unblock at the same time and call + * netif_wake_queue(), which is OK since this + * operation is idempotent. + * - We might wake the queue just after another ring + * stopped it. This is no big deal because the next + * transmission on that ring would stop the queue. + */ + ring->blocked = 0; + netif_wake_queue(dev); + priv->port_stats.wake_queue++; + } + } +} + +void mlx4_en_tx_irq(struct mlx4_cq *mcq) +{ + struct mlx4_en_cq *cq = container_of(mcq, struct mlx4_en_cq, mcq); + struct mlx4_en_priv *priv = netdev_priv(cq->dev); + struct mlx4_en_tx_ring *ring = &priv->tx_ring[cq->ring]; + + spin_lock_irq(&ring->comp_lock); + cq->armed = 0; + mlx4_en_process_tx_cq(cq->dev, cq); + if (ring->blocked) + mlx4_en_arm_cq(priv, cq); + else + mod_timer(&cq->timer, jiffies + 1); + spin_unlock_irq(&ring->comp_lock); +} + + +void mlx4_en_poll_tx_cq(unsigned long data) +{ + struct mlx4_en_cq *cq = (struct mlx4_en_cq *) data; + struct mlx4_en_priv *priv = netdev_priv(cq->dev); + struct mlx4_en_tx_ring *ring = &priv->tx_ring[cq->ring]; + u32 inflight; + + INC_PERF_COUNTER(priv->pstats.tx_poll); + + netif_tx_lock(priv->dev); + spin_lock_irq(&ring->comp_lock); + mlx4_en_process_tx_cq(cq->dev, cq); + inflight = (u32) (ring->prod - ring->cons - ring->last_nr_txbb); + + /* If there are still packets in flight and the timer has not already + * been scheduled by the Tx routine then schedule it here to guarantee + * completion processing of these packets */ + if (inflight && priv->port_up) + mod_timer(&cq->timer, jiffies + MLX4_EN_TX_POLL_TIMEOUT); + + spin_unlock_irq(&ring->comp_lock); + netif_tx_unlock(priv->dev); +} + +static struct mlx4_en_tx_desc *mlx4_en_bounce_to_desc(struct mlx4_en_priv *priv, + struct mlx4_en_tx_ring *ring, + u32 index, + unsigned int desc_size) +{ + u32 copy = (ring->size - index) * TXBB_SIZE; + int i; + + for (i = desc_size - copy - 4; i >= 0; i -= 4) { + if ((i & (TXBB_SIZE - 1)) == 0) + wmb(); + + *((u32 *) (ring->buf + i)) = + *((u32 *) (ring->bounce_buf + copy + i)); + } + + for (i = copy - 4; i >= 4 ; i -= 4) { + if ((i & (TXBB_SIZE - 1)) == 0) + wmb(); + + *((u32 *) (ring->buf + index * TXBB_SIZE + i)) = + *((u32 *) (ring->bounce_buf + i)); + } + + /* Return real descriptor location */ + return ring->buf + index * TXBB_SIZE; +} + +static inline void mlx4_en_xmit_poll(struct mlx4_en_priv *priv, int tx_ind) +{ + struct mlx4_en_cq *cq = &priv->tx_cq[tx_ind]; + struct mlx4_en_tx_ring *ring = &priv->tx_ring[tx_ind]; + + /* If we don't have a pending timer, set one up to catch our recent + post in case the interface becomes idle */ + if (!timer_pending(&cq->timer)) + mod_timer(&cq->timer, jiffies + MLX4_EN_TX_POLL_TIMEOUT); + + /* Poll the CQ every mlx4_en_TX_MODER_POLL packets */ + if ((++ring->poll_cnt & (MLX4_EN_TX_POLL_MODER - 1)) == 0) + mlx4_en_process_tx_cq(priv->dev, cq); +} + +static void *get_frag_ptr(struct sk_buff *skb) +{ + struct skb_frag_struct *frag = &skb_shinfo(skb)->frags[0]; + struct page *page = frag->page; + void *ptr; + + ptr = page_address(page); + if (unlikely(!ptr)) + return NULL; + + return ptr + frag->page_offset; +} + +static int is_inline(struct sk_buff *skb, void **pfrag) +{ + void *ptr; + + if (inline_thold && !skb_is_gso(skb) && skb->len <= inline_thold) { + if (skb_shinfo(skb)->nr_frags == 1) { + ptr = get_frag_ptr(skb); + if (unlikely(!ptr)) + return 0; + + if (pfrag) + *pfrag = ptr; + + return 1; + } else if (unlikely(skb_shinfo(skb)->nr_frags)) + return 0; + else + return 1; + } + + return 0; +} + +static int inline_size(struct sk_buff *skb) +{ + if (skb->len + CTRL_SIZE + sizeof(struct mlx4_wqe_inline_seg) + <= MLX4_INLINE_ALIGN) + return ALIGN(skb->len + CTRL_SIZE + + sizeof(struct mlx4_wqe_inline_seg), 16); + else + return ALIGN(skb->len + CTRL_SIZE + 2 * + sizeof(struct mlx4_wqe_inline_seg), 16); +} + +static int get_real_size(struct sk_buff *skb, struct net_device *dev, + int *lso_header_size) +{ + struct mlx4_en_priv *priv = netdev_priv(dev); + struct mlx4_en_dev *mdev = priv->mdev; + int real_size; + + if (skb_is_gso(skb)) { + *lso_header_size = skb_transport_offset(skb) + tcp_hdrlen(skb); + real_size = CTRL_SIZE + skb_shinfo(skb)->nr_frags * DS_SIZE + + ALIGN(*lso_header_size + 4, DS_SIZE); + if (unlikely(*lso_header_size != skb_headlen(skb))) { + /* We add a segment for the skb linear buffer only if + * it contains data */ + if (*lso_header_size < skb_headlen(skb)) + real_size += DS_SIZE; + else { + if (netif_msg_tx_err(priv)) + mlx4_warn(mdev, "Non-linear headers\n"); + dev_kfree_skb_any(skb); + return 0; + } + } + if (unlikely(*lso_header_size > MAX_LSO_HDR_SIZE)) { + if (netif_msg_tx_err(priv)) + mlx4_warn(mdev, "LSO header size too big\n"); + dev_kfree_skb_any(skb); + return 0; + } + } else { + *lso_header_size = 0; + if (!is_inline(skb, NULL)) + real_size = CTRL_SIZE + (skb_shinfo(skb)->nr_frags + 1) * DS_SIZE; + else + real_size = inline_size(skb); + } + + return real_size; +} + +static void build_inline_wqe(struct mlx4_en_tx_desc *tx_desc, struct sk_buff *skb, + int real_size, u16 *vlan_tag, int tx_ind, void *fragptr) +{ + struct mlx4_wqe_inline_seg *inl = &tx_desc->inl; + int spc = MLX4_INLINE_ALIGN - CTRL_SIZE - sizeof *inl; + + if (skb->len <= spc) { + inl->byte_count = cpu_to_be32(1 << 31 | skb->len); + skb_copy_from_linear_data(skb, inl + 1, skb_headlen(skb)); + if (skb_shinfo(skb)->nr_frags) + memcpy(((void *)(inl + 1)) + skb_headlen(skb), fragptr, + skb_shinfo(skb)->frags[0].size); + + } else { + inl->byte_count = cpu_to_be32(1 << 31 | spc); + if (skb_headlen(skb) <= spc) { + skb_copy_from_linear_data(skb, inl + 1, skb_headlen(skb)); + if (skb_headlen(skb) < spc) { + memcpy(((void *)(inl + 1)) + skb_headlen(skb), + fragptr, spc - skb_headlen(skb)); + fragptr += spc - skb_headlen(skb); + } + inl = (void *) (inl + 1) + spc; + memcpy(((void *)(inl + 1)), fragptr, skb->len - spc); + } else { + skb_copy_from_linear_data(skb, inl + 1, spc); + inl = (void *) (inl + 1) + spc; + skb_copy_from_linear_data_offset(skb, spc, inl + 1, + skb_headlen(skb) - spc); + if (skb_shinfo(skb)->nr_frags) + memcpy(((void *)(inl + 1)) + skb_headlen(skb) - spc, + fragptr, skb_shinfo(skb)->frags[0].size); + } + + wmb(); + inl->byte_count = cpu_to_be32(1 << 31 | (skb->len - spc)); + } + tx_desc->ctrl.vlan_tag = cpu_to_be16(*vlan_tag); + tx_desc->ctrl.ins_vlan = MLX4_WQE_CTRL_INS_VLAN * !!(*vlan_tag); + tx_desc->ctrl.fence_size = (real_size / 16) & 0x3f; +} + +static int get_vlan_info(struct mlx4_en_priv *priv, struct sk_buff *skb, + u16 *vlan_tag) +{ + int tx_ind; + + /* Obtain VLAN information if present */ + if (priv->vlgrp && vlan_tx_tag_present(skb)) { + *vlan_tag = vlan_tx_tag_get(skb); + /* Set the Tx ring to use according to vlan priority */ + tx_ind = priv->tx_prio_map[*vlan_tag >> 13]; + } else { + *vlan_tag = 0; + tx_ind = 0; + } + return tx_ind; +} + +int mlx4_en_xmit(struct sk_buff *skb, struct net_device *dev) +{ + struct mlx4_en_priv *priv = netdev_priv(dev); + struct mlx4_en_dev *mdev = priv->mdev; + struct mlx4_en_tx_ring *ring; + struct mlx4_en_cq *cq; + struct mlx4_en_tx_desc *tx_desc; + struct mlx4_wqe_data_seg *data; + struct skb_frag_struct *frag; + struct mlx4_en_tx_info *tx_info; + int tx_ind = 0; + int nr_txbb; + int desc_size; + int real_size; + dma_addr_t dma; + u32 index; + __be32 op_own; + u16 vlan_tag; + int i; + int lso_header_size; + void *fragptr; + + if (unlikely(!skb->len)) { + dev_kfree_skb_any(skb); + return NETDEV_TX_OK; + } + real_size = get_real_size(skb, dev, &lso_header_size); + if (unlikely(!real_size)) + return NETDEV_TX_OK; + + /* Allign descriptor to TXBB size */ + desc_size = ALIGN(real_size, TXBB_SIZE); + nr_txbb = desc_size / TXBB_SIZE; + if (unlikely(nr_txbb > MAX_DESC_TXBBS)) { + if (netif_msg_tx_err(priv)) + mlx4_warn(mdev, "Oversized header or SG list\n"); + dev_kfree_skb_any(skb); + return NETDEV_TX_OK; + } + + tx_ind = get_vlan_info(priv, skb, &vlan_tag); + ring = &priv->tx_ring[tx_ind]; + + /* Check available TXBBs And 2K spare for prefetch */ + if (unlikely(((int)(ring->prod - ring->cons)) > + ring->size - HEADROOM - MAX_DESC_TXBBS)) { + /* every full Tx ring stops queue. + * TODO: implement multi-queue support (per-queue stop) */ + netif_stop_queue(dev); + ring->blocked = 1; + priv->port_stats.queue_stopped++; + + /* Use interrupts to find out when queue opened */ + cq = &priv->tx_cq[tx_ind]; + mlx4_en_arm_cq(priv, cq); + return NETDEV_TX_BUSY; + } + + /* Now that we know what Tx ring to use */ + if (unlikely(!priv->port_up)) { + if (netif_msg_tx_err(priv)) + mlx4_warn(mdev, "xmit: port down!\n"); + dev_kfree_skb_any(skb); + return NETDEV_TX_OK; + } + + /* Track current inflight packets for performance analysis */ + AVG_PERF_COUNTER(priv->pstats.inflight_avg, + (u32) (ring->prod - ring->cons - 1)); + + /* Packet is good - grab an index and transmit it */ + index = ring->prod & ring->size_mask; + + /* See if we have enough space for whole descriptor TXBB for setting + * SW ownership on next descriptor; if not, use a bounce buffer. */ + if (likely(index + nr_txbb <= ring->size)) + tx_desc = ring->buf + index * TXBB_SIZE; + else + tx_desc = (struct mlx4_en_tx_desc *) ring->bounce_buf; + + /* Save skb in tx_info ring */ + tx_info = &ring->tx_info[index]; + tx_info->skb = skb; + tx_info->nr_txbb = nr_txbb; + + /* Prepare ctrl segement apart opcode+ownership, which depends on + * whether LSO is used */ + tx_desc->ctrl.vlan_tag = cpu_to_be16(vlan_tag); + tx_desc->ctrl.ins_vlan = MLX4_WQE_CTRL_INS_VLAN * !!vlan_tag; + tx_desc->ctrl.fence_size = (real_size / 16) & 0x3f; + tx_desc->ctrl.srcrb_flags = cpu_to_be32(MLX4_WQE_CTRL_CQ_UPDATE | + MLX4_WQE_CTRL_SOLICITED); + if (likely(skb->ip_summed == CHECKSUM_PARTIAL)) { + tx_desc->ctrl.srcrb_flags |= cpu_to_be32(MLX4_WQE_CTRL_IP_CSUM | + MLX4_WQE_CTRL_TCP_UDP_CSUM); + priv->port_stats.tx_chksum_offload++; + } + + /* Handle LSO (TSO) packets */ + if (lso_header_size) { + /* Mark opcode as LSO */ + op_own = cpu_to_be32(MLX4_OPCODE_LSO | (1 << 6)) | + ((ring->prod & ring->size) ? + cpu_to_be32(MLX4_EN_BIT_DESC_OWN) : 0); + + /* Fill in the LSO prefix */ + tx_desc->lso.mss_hdr_size = cpu_to_be32( + skb_shinfo(skb)->gso_size << 16 | lso_header_size); + + /* Copy headers; + * note that we already verified that it is linear */ + memcpy(tx_desc->lso.header, skb->data, lso_header_size); + data = ((void *) &tx_desc->lso + + ALIGN(lso_header_size + 4, DS_SIZE)); + + priv->port_stats.tso_packets++; + i = ((skb->len - lso_header_size) / skb_shinfo(skb)->gso_size) + + !!((skb->len - lso_header_size) % skb_shinfo(skb)->gso_size); + ring->bytes += skb->len + (i - 1) * lso_header_size; + ring->packets += i; + } else { + /* Normal (Non LSO) packet */ + op_own = cpu_to_be32(MLX4_OPCODE_SEND) | + ((ring->prod & ring->size) ? + cpu_to_be32(MLX4_EN_BIT_DESC_OWN) : 0); + data = &tx_desc->data; + ring->bytes += max(skb->len, (unsigned int) ETH_ZLEN); + ring->packets++; + + } + AVG_PERF_COUNTER(priv->pstats.tx_pktsz_avg, skb->len); + + + /* valid only for none inline segments */ + tx_info->data_offset = (void *) data - (void *) tx_desc; + + tx_info->linear = (lso_header_size < skb_headlen(skb) && !is_inline(skb, NULL)) ? 1 : 0; + data += skb_shinfo(skb)->nr_frags + tx_info->linear - 1; + + if (!is_inline(skb, &fragptr)) { + /* Map fragments */ + for (i = skb_shinfo(skb)->nr_frags - 1; i >= 0; i--) { + frag = &skb_shinfo(skb)->frags[i]; + dma = pci_map_page(mdev->dev->pdev, frag->page, frag->page_offset, + frag->size, PCI_DMA_TODEVICE); + data->addr = cpu_to_be64(dma); + data->lkey = cpu_to_be32(mdev->mr.key); + wmb(); + data->byte_count = cpu_to_be32(frag->size); + --data; + } + + /* Map linear part */ + if (tx_info->linear) { + dma = pci_map_single(mdev->dev->pdev, skb->data + lso_header_size, + skb_headlen(skb) - lso_header_size, PCI_DMA_TODEVICE); + data->addr = cpu_to_be64(dma); + data->lkey = cpu_to_be32(mdev->mr.key); + wmb(); + data->byte_count = cpu_to_be32(skb_headlen(skb) - lso_header_size); + } + } else + build_inline_wqe(tx_desc, skb, real_size, &vlan_tag, tx_ind, fragptr); + + ring->prod += nr_txbb; + + /* If we used a bounce buffer then copy descriptor back into place */ + if (tx_desc == (struct mlx4_en_tx_desc *) ring->bounce_buf) + tx_desc = mlx4_en_bounce_to_desc(priv, ring, index, desc_size); + + /* Run destructor before passing skb to HW */ + if (likely(!skb_shared(skb))) + skb_orphan(skb); + + /* Ensure new descirptor hits memory + * before setting ownership of this descriptor to HW */ + wmb(); + tx_desc->ctrl.owner_opcode = op_own; + + /* Ring doorbell! */ + wmb(); + writel(ring->doorbell_qpn, mdev->uar_map + MLX4_SEND_DOORBELL); + dev->trans_start = jiffies; + + /* Poll CQ here */ + mlx4_en_xmit_poll(priv, tx_ind); + + return 0; +} + diff --git a/drivers/net/mlx4/eq.c b/drivers/net/mlx4/eq.c index 8a8b56135a58..de169338cd90 100644 --- a/drivers/net/mlx4/eq.c +++ b/drivers/net/mlx4/eq.c @@ -558,7 +558,7 @@ int mlx4_init_eq_table(struct mlx4_dev *dev) int i; err = mlx4_bitmap_init(&priv->eq_table.bitmap, dev->caps.num_eqs, - dev->caps.num_eqs - 1, dev->caps.reserved_eqs); + dev->caps.num_eqs - 1, dev->caps.reserved_eqs, 0); if (err) return err; diff --git a/drivers/net/mlx4/fw.c b/drivers/net/mlx4/fw.c index 7e32955da982..be09fdb79cb8 100644 --- a/drivers/net/mlx4/fw.c +++ b/drivers/net/mlx4/fw.c @@ -88,6 +88,7 @@ static void dump_dev_cap_flags(struct mlx4_dev *dev, u32 flags) [ 8] = "P_Key violation counter", [ 9] = "Q_Key violation counter", [10] = "VMM", + [12] = "DPDP", [16] = "MW support", [17] = "APM support", [18] = "Atomic ops support", @@ -346,7 +347,7 @@ int mlx4_QUERY_DEV_CAP(struct mlx4_dev *dev, struct mlx4_dev_cap *dev_cap) MLX4_GET(field, outbox, QUERY_DEV_CAP_VL_PORT_OFFSET); dev_cap->max_vl[i] = field >> 4; MLX4_GET(field, outbox, QUERY_DEV_CAP_MTU_WIDTH_OFFSET); - dev_cap->max_mtu[i] = field >> 4; + dev_cap->ib_mtu[i] = field >> 4; dev_cap->max_port_width[i] = field & 0xf; MLX4_GET(field, outbox, QUERY_DEV_CAP_MAX_GID_OFFSET); dev_cap->max_gids[i] = 1 << (field & 0xf); @@ -354,9 +355,13 @@ int mlx4_QUERY_DEV_CAP(struct mlx4_dev *dev, struct mlx4_dev_cap *dev_cap) dev_cap->max_pkeys[i] = 1 << (field & 0xf); } } else { +#define QUERY_PORT_SUPPORTED_TYPE_OFFSET 0x00 #define QUERY_PORT_MTU_OFFSET 0x01 +#define QUERY_PORT_ETH_MTU_OFFSET 0x02 #define QUERY_PORT_WIDTH_OFFSET 0x06 #define QUERY_PORT_MAX_GID_PKEY_OFFSET 0x07 +#define QUERY_PORT_MAC_OFFSET 0x08 +#define QUERY_PORT_MAX_MACVLAN_OFFSET 0x0a #define QUERY_PORT_MAX_VL_OFFSET 0x0b for (i = 1; i <= dev_cap->num_ports; ++i) { @@ -365,8 +370,10 @@ int mlx4_QUERY_DEV_CAP(struct mlx4_dev *dev, struct mlx4_dev_cap *dev_cap) if (err) goto out; + MLX4_GET(field, outbox, QUERY_PORT_SUPPORTED_TYPE_OFFSET); + dev_cap->supported_port_types[i] = field & 3; MLX4_GET(field, outbox, QUERY_PORT_MTU_OFFSET); - dev_cap->max_mtu[i] = field & 0xf; + dev_cap->ib_mtu[i] = field & 0xf; MLX4_GET(field, outbox, QUERY_PORT_WIDTH_OFFSET); dev_cap->max_port_width[i] = field & 0xf; MLX4_GET(field, outbox, QUERY_PORT_MAX_GID_PKEY_OFFSET); @@ -374,6 +381,11 @@ int mlx4_QUERY_DEV_CAP(struct mlx4_dev *dev, struct mlx4_dev_cap *dev_cap) dev_cap->max_pkeys[i] = 1 << (field & 0xf); MLX4_GET(field, outbox, QUERY_PORT_MAX_VL_OFFSET); dev_cap->max_vl[i] = field & 0xf; + MLX4_GET(field, outbox, QUERY_PORT_MAX_MACVLAN_OFFSET); + dev_cap->log_max_macs[i] = field & 0xf; + dev_cap->log_max_vlans[i] = field >> 4; + MLX4_GET(dev_cap->eth_mtu[i], outbox, QUERY_PORT_ETH_MTU_OFFSET); + MLX4_GET(dev_cap->def_mac[i], outbox, QUERY_PORT_MAC_OFFSET); } } @@ -407,7 +419,7 @@ int mlx4_QUERY_DEV_CAP(struct mlx4_dev *dev, struct mlx4_dev_cap *dev_cap) mlx4_dbg(dev, "Max CQEs: %d, max WQEs: %d, max SRQ WQEs: %d\n", dev_cap->max_cq_sz, dev_cap->max_qp_sz, dev_cap->max_srq_sz); mlx4_dbg(dev, "Local CA ACK delay: %d, max MTU: %d, port width cap: %d\n", - dev_cap->local_ca_ack_delay, 128 << dev_cap->max_mtu[1], + dev_cap->local_ca_ack_delay, 128 << dev_cap->ib_mtu[1], dev_cap->max_port_width[1]); mlx4_dbg(dev, "Max SQ desc size: %d, max SQ S/G: %d\n", dev_cap->max_sq_desc_sz, dev_cap->max_sq_sg); @@ -819,7 +831,7 @@ int mlx4_INIT_PORT(struct mlx4_dev *dev, int port) flags |= (dev->caps.port_width_cap[port] & 0xf) << INIT_PORT_PORT_WIDTH_SHIFT; MLX4_PUT(inbox, flags, INIT_PORT_FLAGS_OFFSET); - field = 128 << dev->caps.mtu_cap[port]; + field = 128 << dev->caps.ib_mtu_cap[port]; MLX4_PUT(inbox, field, INIT_PORT_MTU_OFFSET); field = dev->caps.gid_table_len[port]; MLX4_PUT(inbox, field, INIT_PORT_MAX_GID_OFFSET); diff --git a/drivers/net/mlx4/fw.h b/drivers/net/mlx4/fw.h index decbb5c2ad41..526d7f30c041 100644 --- a/drivers/net/mlx4/fw.h +++ b/drivers/net/mlx4/fw.h @@ -66,11 +66,13 @@ struct mlx4_dev_cap { int local_ca_ack_delay; int num_ports; u32 max_msg_sz; - int max_mtu[MLX4_MAX_PORTS + 1]; + int ib_mtu[MLX4_MAX_PORTS + 1]; int max_port_width[MLX4_MAX_PORTS + 1]; int max_vl[MLX4_MAX_PORTS + 1]; int max_gids[MLX4_MAX_PORTS + 1]; int max_pkeys[MLX4_MAX_PORTS + 1]; + u64 def_mac[MLX4_MAX_PORTS + 1]; + u16 eth_mtu[MLX4_MAX_PORTS + 1]; u16 stat_rate_support; u32 flags; int reserved_uars; @@ -102,6 +104,9 @@ struct mlx4_dev_cap { u32 reserved_lkey; u64 max_icm_sz; int max_gso_sz; + u8 supported_port_types[MLX4_MAX_PORTS + 1]; + u8 log_max_macs[MLX4_MAX_PORTS + 1]; + u8 log_max_vlans[MLX4_MAX_PORTS + 1]; }; struct mlx4_adapter { diff --git a/drivers/net/mlx4/main.c b/drivers/net/mlx4/main.c index 1252a919de2e..468921b8f4b6 100644 --- a/drivers/net/mlx4/main.c +++ b/drivers/net/mlx4/main.c @@ -85,6 +85,57 @@ static struct mlx4_profile default_profile = { .num_mtt = 1 << 20, }; +static int log_num_mac = 2; +module_param_named(log_num_mac, log_num_mac, int, 0444); +MODULE_PARM_DESC(log_num_mac, "Log2 max number of MACs per ETH port (1-7)"); + +static int log_num_vlan; +module_param_named(log_num_vlan, log_num_vlan, int, 0444); +MODULE_PARM_DESC(log_num_vlan, "Log2 max number of VLANs per ETH port (0-7)"); + +static int use_prio; +module_param_named(use_prio, use_prio, bool, 0444); +MODULE_PARM_DESC(use_prio, "Enable steering by VLAN priority on ETH ports " + "(0/1, default 0)"); + +static int mlx4_check_port_params(struct mlx4_dev *dev, + enum mlx4_port_type *port_type) +{ + int i; + + for (i = 0; i < dev->caps.num_ports - 1; i++) { + if (port_type[i] != port_type[i+1] && + !(dev->caps.flags & MLX4_DEV_CAP_FLAG_DPDP)) { + mlx4_err(dev, "Only same port types supported " + "on this HCA, aborting.\n"); + return -EINVAL; + } + } + if ((port_type[0] == MLX4_PORT_TYPE_ETH) && + (port_type[1] == MLX4_PORT_TYPE_IB)) { + mlx4_err(dev, "eth-ib configuration is not supported.\n"); + return -EINVAL; + } + + for (i = 0; i < dev->caps.num_ports; i++) { + if (!(port_type[i] & dev->caps.supported_type[i+1])) { + mlx4_err(dev, "Requested port type for port %d is not " + "supported on this HCA\n", i + 1); + return -EINVAL; + } + } + return 0; +} + +static void mlx4_set_port_mask(struct mlx4_dev *dev) +{ + int i; + + dev->caps.port_mask = 0; + for (i = 1; i <= dev->caps.num_ports; ++i) + if (dev->caps.port_type[i] == MLX4_PORT_TYPE_IB) + dev->caps.port_mask |= 1 << (i - 1); +} static int mlx4_dev_cap(struct mlx4_dev *dev, struct mlx4_dev_cap *dev_cap) { int err; @@ -120,10 +171,13 @@ static int mlx4_dev_cap(struct mlx4_dev *dev, struct mlx4_dev_cap *dev_cap) dev->caps.num_ports = dev_cap->num_ports; for (i = 1; i <= dev->caps.num_ports; ++i) { dev->caps.vl_cap[i] = dev_cap->max_vl[i]; - dev->caps.mtu_cap[i] = dev_cap->max_mtu[i]; + dev->caps.ib_mtu_cap[i] = dev_cap->ib_mtu[i]; dev->caps.gid_table_len[i] = dev_cap->max_gids[i]; dev->caps.pkey_table_len[i] = dev_cap->max_pkeys[i]; dev->caps.port_width_cap[i] = dev_cap->max_port_width[i]; + dev->caps.eth_mtu_cap[i] = dev_cap->eth_mtu[i]; + dev->caps.def_mac[i] = dev_cap->def_mac[i]; + dev->caps.supported_type[i] = dev_cap->supported_port_types[i]; } dev->caps.num_uars = dev_cap->uar_size / PAGE_SIZE; @@ -134,7 +188,6 @@ static int mlx4_dev_cap(struct mlx4_dev *dev, struct mlx4_dev_cap *dev_cap) dev->caps.max_rq_sg = dev_cap->max_rq_sg; dev->caps.max_wqes = dev_cap->max_qp_sz; dev->caps.max_qp_init_rdma = dev_cap->max_requester_per_qp; - dev->caps.reserved_qps = dev_cap->reserved_qps; dev->caps.max_srq_wqes = dev_cap->max_srq_sz; dev->caps.max_srq_sge = dev_cap->max_rq_sg - 1; dev->caps.reserved_srqs = dev_cap->reserved_srqs; @@ -163,9 +216,138 @@ static int mlx4_dev_cap(struct mlx4_dev *dev, struct mlx4_dev_cap *dev_cap) dev->caps.stat_rate_support = dev_cap->stat_rate_support; dev->caps.max_gso_sz = dev_cap->max_gso_sz; + dev->caps.log_num_macs = log_num_mac; + dev->caps.log_num_vlans = log_num_vlan; + dev->caps.log_num_prios = use_prio ? 3 : 0; + + for (i = 1; i <= dev->caps.num_ports; ++i) { + if (dev->caps.supported_type[i] != MLX4_PORT_TYPE_ETH) + dev->caps.port_type[i] = MLX4_PORT_TYPE_IB; + else + dev->caps.port_type[i] = MLX4_PORT_TYPE_ETH; + + if (dev->caps.log_num_macs > dev_cap->log_max_macs[i]) { + dev->caps.log_num_macs = dev_cap->log_max_macs[i]; + mlx4_warn(dev, "Requested number of MACs is too much " + "for port %d, reducing to %d.\n", + i, 1 << dev->caps.log_num_macs); + } + if (dev->caps.log_num_vlans > dev_cap->log_max_vlans[i]) { + dev->caps.log_num_vlans = dev_cap->log_max_vlans[i]; + mlx4_warn(dev, "Requested number of VLANs is too much " + "for port %d, reducing to %d.\n", + i, 1 << dev->caps.log_num_vlans); + } + } + + mlx4_set_port_mask(dev); + + dev->caps.reserved_qps_cnt[MLX4_QP_REGION_FW] = dev_cap->reserved_qps; + dev->caps.reserved_qps_cnt[MLX4_QP_REGION_ETH_ADDR] = + dev->caps.reserved_qps_cnt[MLX4_QP_REGION_FC_ADDR] = + (1 << dev->caps.log_num_macs) * + (1 << dev->caps.log_num_vlans) * + (1 << dev->caps.log_num_prios) * + dev->caps.num_ports; + dev->caps.reserved_qps_cnt[MLX4_QP_REGION_FC_EXCH] = MLX4_NUM_FEXCH; + + dev->caps.reserved_qps = dev->caps.reserved_qps_cnt[MLX4_QP_REGION_FW] + + dev->caps.reserved_qps_cnt[MLX4_QP_REGION_ETH_ADDR] + + dev->caps.reserved_qps_cnt[MLX4_QP_REGION_FC_ADDR] + + dev->caps.reserved_qps_cnt[MLX4_QP_REGION_FC_EXCH]; + return 0; } +/* + * Change the port configuration of the device. + * Every user of this function must hold the port mutex. + */ +static int mlx4_change_port_types(struct mlx4_dev *dev, + enum mlx4_port_type *port_types) +{ + int err = 0; + int change = 0; + int port; + + for (port = 0; port < dev->caps.num_ports; port++) { + if (port_types[port] != dev->caps.port_type[port + 1]) { + change = 1; + dev->caps.port_type[port + 1] = port_types[port]; + } + } + if (change) { + mlx4_unregister_device(dev); + for (port = 1; port <= dev->caps.num_ports; port++) { + mlx4_CLOSE_PORT(dev, port); + err = mlx4_SET_PORT(dev, port); + if (err) { + mlx4_err(dev, "Failed to set port %d, " + "aborting\n", port); + goto out; + } + } + mlx4_set_port_mask(dev); + err = mlx4_register_device(dev); + } + +out: + return err; +} + +static ssize_t show_port_type(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct mlx4_port_info *info = container_of(attr, struct mlx4_port_info, + port_attr); + struct mlx4_dev *mdev = info->dev; + + return sprintf(buf, "%s\n", + mdev->caps.port_type[info->port] == MLX4_PORT_TYPE_IB ? + "ib" : "eth"); +} + +static ssize_t set_port_type(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct mlx4_port_info *info = container_of(attr, struct mlx4_port_info, + port_attr); + struct mlx4_dev *mdev = info->dev; + struct mlx4_priv *priv = mlx4_priv(mdev); + enum mlx4_port_type types[MLX4_MAX_PORTS]; + int i; + int err = 0; + + if (!strcmp(buf, "ib\n")) + info->tmp_type = MLX4_PORT_TYPE_IB; + else if (!strcmp(buf, "eth\n")) + info->tmp_type = MLX4_PORT_TYPE_ETH; + else { + mlx4_err(mdev, "%s is not supported port type\n", buf); + return -EINVAL; + } + + mutex_lock(&priv->port_mutex); + for (i = 0; i < mdev->caps.num_ports; i++) + types[i] = priv->port[i+1].tmp_type ? priv->port[i+1].tmp_type : + mdev->caps.port_type[i+1]; + + err = mlx4_check_port_params(mdev, types); + if (err) + goto out; + + for (i = 1; i <= mdev->caps.num_ports; i++) + priv->port[i].tmp_type = 0; + + err = mlx4_change_port_types(mdev, types); + +out: + mutex_unlock(&priv->port_mutex); + return err ? err : count; +} + static int mlx4_load_fw(struct mlx4_dev *dev) { struct mlx4_priv *priv = mlx4_priv(dev); @@ -211,7 +393,8 @@ static int mlx4_init_cmpt_table(struct mlx4_dev *dev, u64 cmpt_base, ((u64) (MLX4_CMPT_TYPE_QP * cmpt_entry_sz) << MLX4_CMPT_SHIFT), cmpt_entry_sz, dev->caps.num_qps, - dev->caps.reserved_qps, 0, 0); + dev->caps.reserved_qps_cnt[MLX4_QP_REGION_FW], + 0, 0); if (err) goto err; @@ -336,7 +519,8 @@ static int mlx4_init_icm(struct mlx4_dev *dev, struct mlx4_dev_cap *dev_cap, init_hca->qpc_base, dev_cap->qpc_entry_sz, dev->caps.num_qps, - dev->caps.reserved_qps, 0, 0); + dev->caps.reserved_qps_cnt[MLX4_QP_REGION_FW], + 0, 0); if (err) { mlx4_err(dev, "Failed to map QP context memory, aborting.\n"); goto err_unmap_dmpt; @@ -346,7 +530,8 @@ static int mlx4_init_icm(struct mlx4_dev *dev, struct mlx4_dev_cap *dev_cap, init_hca->auxc_base, dev_cap->aux_entry_sz, dev->caps.num_qps, - dev->caps.reserved_qps, 0, 0); + dev->caps.reserved_qps_cnt[MLX4_QP_REGION_FW], + 0, 0); if (err) { mlx4_err(dev, "Failed to map AUXC context memory, aborting.\n"); goto err_unmap_qp; @@ -356,7 +541,8 @@ static int mlx4_init_icm(struct mlx4_dev *dev, struct mlx4_dev_cap *dev_cap, init_hca->altc_base, dev_cap->altc_entry_sz, dev->caps.num_qps, - dev->caps.reserved_qps, 0, 0); + dev->caps.reserved_qps_cnt[MLX4_QP_REGION_FW], + 0, 0); if (err) { mlx4_err(dev, "Failed to map ALTC context memory, aborting.\n"); goto err_unmap_auxc; @@ -366,7 +552,8 @@ static int mlx4_init_icm(struct mlx4_dev *dev, struct mlx4_dev_cap *dev_cap, init_hca->rdmarc_base, dev_cap->rdmarc_entry_sz << priv->qp_table.rdmarc_shift, dev->caps.num_qps, - dev->caps.reserved_qps, 0, 0); + dev->caps.reserved_qps_cnt[MLX4_QP_REGION_FW], + 0, 0); if (err) { mlx4_err(dev, "Failed to map RDMARC context memory, aborting\n"); goto err_unmap_altc; @@ -565,6 +752,7 @@ static int mlx4_setup_hca(struct mlx4_dev *dev) { struct mlx4_priv *priv = mlx4_priv(dev); int err; + int port; err = mlx4_init_uar_table(dev); if (err) { @@ -663,8 +851,20 @@ static int mlx4_setup_hca(struct mlx4_dev *dev) goto err_qp_table_free; } + for (port = 1; port <= dev->caps.num_ports; port++) { + err = mlx4_SET_PORT(dev, port); + if (err) { + mlx4_err(dev, "Failed to set port %d, aborting\n", + port); + goto err_mcg_table_free; + } + } + return 0; +err_mcg_table_free: + mlx4_cleanup_mcg_table(dev); + err_qp_table_free: mlx4_cleanup_qp_table(dev); @@ -728,11 +928,45 @@ no_msi: priv->eq_table.eq[i].irq = dev->pdev->irq; } +static int mlx4_init_port_info(struct mlx4_dev *dev, int port) +{ + struct mlx4_port_info *info = &mlx4_priv(dev)->port[port]; + int err = 0; + + info->dev = dev; + info->port = port; + mlx4_init_mac_table(dev, &info->mac_table); + mlx4_init_vlan_table(dev, &info->vlan_table); + + sprintf(info->dev_name, "mlx4_port%d", port); + info->port_attr.attr.name = info->dev_name; + info->port_attr.attr.mode = S_IRUGO | S_IWUSR; + info->port_attr.show = show_port_type; + info->port_attr.store = set_port_type; + + err = device_create_file(&dev->pdev->dev, &info->port_attr); + if (err) { + mlx4_err(dev, "Failed to create file for port %d\n", port); + info->port = -1; + } + + return err; +} + +static void mlx4_cleanup_port_info(struct mlx4_port_info *info) +{ + if (info->port < 0) + return; + + device_remove_file(&info->dev->pdev->dev, &info->port_attr); +} + static int __mlx4_init_one(struct pci_dev *pdev, const struct pci_device_id *id) { struct mlx4_priv *priv; struct mlx4_dev *dev; int err; + int port; printk(KERN_INFO PFX "Initializing %s\n", pci_name(pdev)); @@ -807,6 +1041,8 @@ static int __mlx4_init_one(struct pci_dev *pdev, const struct pci_device_id *id) INIT_LIST_HEAD(&priv->ctx_list); spin_lock_init(&priv->ctx_lock); + mutex_init(&priv->port_mutex); + INIT_LIST_HEAD(&priv->pgdir_list); mutex_init(&priv->pgdir_mutex); @@ -842,15 +1078,24 @@ static int __mlx4_init_one(struct pci_dev *pdev, const struct pci_device_id *id) if (err) goto err_close; + for (port = 1; port <= dev->caps.num_ports; port++) { + err = mlx4_init_port_info(dev, port); + if (err) + goto err_port; + } + err = mlx4_register_device(dev); if (err) - goto err_cleanup; + goto err_port; pci_set_drvdata(pdev, dev); return 0; -err_cleanup: +err_port: + for (port = 1; port <= dev->caps.num_ports; port++) + mlx4_cleanup_port_info(&priv->port[port]); + mlx4_cleanup_mcg_table(dev); mlx4_cleanup_qp_table(dev); mlx4_cleanup_srq_table(dev); @@ -907,8 +1152,10 @@ static void mlx4_remove_one(struct pci_dev *pdev) if (dev) { mlx4_unregister_device(dev); - for (p = 1; p <= dev->caps.num_ports; ++p) + for (p = 1; p <= dev->caps.num_ports; p++) { + mlx4_cleanup_port_info(&priv->port[p]); mlx4_CLOSE_PORT(dev, p); + } mlx4_cleanup_mcg_table(dev); mlx4_cleanup_qp_table(dev); @@ -948,6 +1195,8 @@ static struct pci_device_id mlx4_pci_table[] = { { PCI_VDEVICE(MELLANOX, 0x6354) }, /* MT25408 "Hermon" QDR */ { PCI_VDEVICE(MELLANOX, 0x6732) }, /* MT25408 "Hermon" DDR PCIe gen2 */ { PCI_VDEVICE(MELLANOX, 0x673c) }, /* MT25408 "Hermon" QDR PCIe gen2 */ + { PCI_VDEVICE(MELLANOX, 0x6368) }, /* MT25408 "Hermon" EN 10GigE */ + { PCI_VDEVICE(MELLANOX, 0x6750) }, /* MT25408 "Hermon" EN 10GigE PCIe gen2 */ { 0, } }; @@ -960,10 +1209,28 @@ static struct pci_driver mlx4_driver = { .remove = __devexit_p(mlx4_remove_one) }; +static int __init mlx4_verify_params(void) +{ + if ((log_num_mac < 0) || (log_num_mac > 7)) { + printk(KERN_WARNING "mlx4_core: bad num_mac: %d\n", log_num_mac); + return -1; + } + + if ((log_num_vlan < 0) || (log_num_vlan > 7)) { + printk(KERN_WARNING "mlx4_core: bad num_vlan: %d\n", log_num_vlan); + return -1; + } + + return 0; +} + static int __init mlx4_init(void) { int ret; + if (mlx4_verify_params()) + return -EINVAL; + ret = mlx4_catas_init(); if (ret) return ret; diff --git a/drivers/net/mlx4/mcg.c b/drivers/net/mlx4/mcg.c index c83f88ce0736..592c01ae2c5d 100644 --- a/drivers/net/mlx4/mcg.c +++ b/drivers/net/mlx4/mcg.c @@ -368,8 +368,8 @@ int mlx4_init_mcg_table(struct mlx4_dev *dev) struct mlx4_priv *priv = mlx4_priv(dev); int err; - err = mlx4_bitmap_init(&priv->mcg_table.bitmap, - dev->caps.num_amgms, dev->caps.num_amgms - 1, 0); + err = mlx4_bitmap_init(&priv->mcg_table.bitmap, dev->caps.num_amgms, + dev->caps.num_amgms - 1, 0, 0); if (err) return err; diff --git a/drivers/net/mlx4/mlx4.h b/drivers/net/mlx4/mlx4.h index 5337e3ac3e78..fa431fad0eec 100644 --- a/drivers/net/mlx4/mlx4.h +++ b/drivers/net/mlx4/mlx4.h @@ -111,6 +111,7 @@ struct mlx4_bitmap { u32 last; u32 top; u32 max; + u32 reserved_top; u32 mask; spinlock_t lock; unsigned long *table; @@ -251,6 +252,38 @@ struct mlx4_catas_err { struct list_head list; }; +#define MLX4_MAX_MAC_NUM 128 +#define MLX4_MAC_TABLE_SIZE (MLX4_MAX_MAC_NUM << 3) + +struct mlx4_mac_table { + __be64 entries[MLX4_MAX_MAC_NUM]; + int refs[MLX4_MAX_MAC_NUM]; + struct mutex mutex; + int total; + int max; +}; + +#define MLX4_MAX_VLAN_NUM 128 +#define MLX4_VLAN_TABLE_SIZE (MLX4_MAX_VLAN_NUM << 2) + +struct mlx4_vlan_table { + __be32 entries[MLX4_MAX_VLAN_NUM]; + int refs[MLX4_MAX_VLAN_NUM]; + struct mutex mutex; + int total; + int max; +}; + +struct mlx4_port_info { + struct mlx4_dev *dev; + int port; + char dev_name[16]; + struct device_attribute port_attr; + enum mlx4_port_type tmp_type; + struct mlx4_mac_table mac_table; + struct mlx4_vlan_table vlan_table; +}; + struct mlx4_priv { struct mlx4_dev dev; @@ -279,6 +312,8 @@ struct mlx4_priv { struct mlx4_uar driver_uar; void __iomem *kar; + struct mlx4_port_info port[MLX4_MAX_PORTS + 1]; + struct mutex port_mutex; }; static inline struct mlx4_priv *mlx4_priv(struct mlx4_dev *dev) @@ -288,7 +323,10 @@ static inline struct mlx4_priv *mlx4_priv(struct mlx4_dev *dev) u32 mlx4_bitmap_alloc(struct mlx4_bitmap *bitmap); void mlx4_bitmap_free(struct mlx4_bitmap *bitmap, u32 obj); -int mlx4_bitmap_init(struct mlx4_bitmap *bitmap, u32 num, u32 mask, u32 reserved); +u32 mlx4_bitmap_alloc_range(struct mlx4_bitmap *bitmap, int cnt, int align); +void mlx4_bitmap_free_range(struct mlx4_bitmap *bitmap, u32 obj, int cnt); +int mlx4_bitmap_init(struct mlx4_bitmap *bitmap, u32 num, u32 mask, + u32 reserved_bot, u32 resetrved_top); void mlx4_bitmap_cleanup(struct mlx4_bitmap *bitmap); int mlx4_reset(struct mlx4_dev *dev); @@ -346,4 +384,9 @@ void mlx4_srq_event(struct mlx4_dev *dev, u32 srqn, int event_type); void mlx4_handle_catas_err(struct mlx4_dev *dev); +void mlx4_init_mac_table(struct mlx4_dev *dev, struct mlx4_mac_table *table); +void mlx4_init_vlan_table(struct mlx4_dev *dev, struct mlx4_vlan_table *table); + +int mlx4_SET_PORT(struct mlx4_dev *dev, u8 port); + #endif /* MLX4_H */ diff --git a/drivers/net/mlx4/mlx4_en.h b/drivers/net/mlx4/mlx4_en.h new file mode 100644 index 000000000000..11fb17c6e97b --- /dev/null +++ b/drivers/net/mlx4/mlx4_en.h @@ -0,0 +1,561 @@ +/* + * Copyright (c) 2007 Mellanox Technologies. All rights reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the + * OpenIB.org BSD license below: + * + * Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * - Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * + * - Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + * + */ + +#ifndef _MLX4_EN_H_ +#define _MLX4_EN_H_ + +#include <linux/compiler.h> +#include <linux/list.h> +#include <linux/mutex.h> +#include <linux/netdevice.h> +#include <linux/inet_lro.h> + +#include <linux/mlx4/device.h> +#include <linux/mlx4/qp.h> +#include <linux/mlx4/cq.h> +#include <linux/mlx4/srq.h> +#include <linux/mlx4/doorbell.h> + +#include "en_port.h" + +#define DRV_NAME "mlx4_en" +#define DRV_VERSION "1.4.0" +#define DRV_RELDATE "Sep 2008" + + +#define MLX4_EN_MSG_LEVEL (NETIF_MSG_LINK | NETIF_MSG_IFDOWN) + +#define mlx4_dbg(mlevel, priv, format, arg...) \ + if (NETIF_MSG_##mlevel & priv->msg_enable) \ + printk(KERN_DEBUG "%s %s: " format , DRV_NAME ,\ + (&priv->mdev->pdev->dev)->bus_id , ## arg) + +#define mlx4_err(mdev, format, arg...) \ + printk(KERN_ERR "%s %s: " format , DRV_NAME ,\ + (&mdev->pdev->dev)->bus_id , ## arg) +#define mlx4_info(mdev, format, arg...) \ + printk(KERN_INFO "%s %s: " format , DRV_NAME ,\ + (&mdev->pdev->dev)->bus_id , ## arg) +#define mlx4_warn(mdev, format, arg...) \ + printk(KERN_WARNING "%s %s: " format , DRV_NAME ,\ + (&mdev->pdev->dev)->bus_id , ## arg) + +/* + * Device constants + */ + + +#define MLX4_EN_PAGE_SHIFT 12 +#define MLX4_EN_PAGE_SIZE (1 << MLX4_EN_PAGE_SHIFT) +#define MAX_TX_RINGS 16 +#define MAX_RX_RINGS 16 +#define MAX_RSS_MAP_SIZE 64 +#define RSS_FACTOR 2 +#define TXBB_SIZE 64 +#define HEADROOM (2048 / TXBB_SIZE + 1) +#define MAX_LSO_HDR_SIZE 92 +#define STAMP_STRIDE 64 +#define STAMP_DWORDS (STAMP_STRIDE / 4) +#define STAMP_SHIFT 31 +#define STAMP_VAL 0x7fffffff +#define STATS_DELAY (HZ / 4) + +/* Typical TSO descriptor with 16 gather entries is 352 bytes... */ +#define MAX_DESC_SIZE 512 +#define MAX_DESC_TXBBS (MAX_DESC_SIZE / TXBB_SIZE) + +/* + * OS related constants and tunables + */ + +#define MLX4_EN_WATCHDOG_TIMEOUT (15 * HZ) + +#define MLX4_EN_ALLOC_ORDER 2 +#define MLX4_EN_ALLOC_SIZE (PAGE_SIZE << MLX4_EN_ALLOC_ORDER) + +#define MLX4_EN_MAX_LRO_DESCRIPTORS 32 + +/* Receive fragment sizes; we use at most 4 fragments (for 9600 byte MTU + * and 4K allocations) */ +enum { + FRAG_SZ0 = 512 - NET_IP_ALIGN, + FRAG_SZ1 = 1024, + FRAG_SZ2 = 4096, + FRAG_SZ3 = MLX4_EN_ALLOC_SIZE +}; +#define MLX4_EN_MAX_RX_FRAGS 4 + +/* Minimum ring size for our page-allocation sceme to work */ +#define MLX4_EN_MIN_RX_SIZE (MLX4_EN_ALLOC_SIZE / SMP_CACHE_BYTES) +#define MLX4_EN_MIN_TX_SIZE (4096 / TXBB_SIZE) + +#define MLX4_EN_TX_RING_NUM 9 +#define MLX4_EN_DEF_TX_RING_SIZE 1024 +#define MLX4_EN_DEF_RX_RING_SIZE 1024 + +/* Target number of bytes to coalesce with interrupt moderation */ +#define MLX4_EN_RX_COAL_TARGET 0x20000 +#define MLX4_EN_RX_COAL_TIME 0x10 + +#define MLX4_EN_TX_COAL_PKTS 5 +#define MLX4_EN_TX_COAL_TIME 0x80 + +#define MLX4_EN_RX_RATE_LOW 400000 +#define MLX4_EN_RX_COAL_TIME_LOW 0 +#define MLX4_EN_RX_RATE_HIGH 450000 +#define MLX4_EN_RX_COAL_TIME_HIGH 128 +#define MLX4_EN_RX_SIZE_THRESH 1024 +#define MLX4_EN_RX_RATE_THRESH (1000000 / MLX4_EN_RX_COAL_TIME_HIGH) +#define MLX4_EN_SAMPLE_INTERVAL 0 + +#define MLX4_EN_AUTO_CONF 0xffff + +#define MLX4_EN_DEF_RX_PAUSE 1 +#define MLX4_EN_DEF_TX_PAUSE 1 + +/* Interval between sucessive polls in the Tx routine when polling is used + instead of interrupts (in per-core Tx rings) - should be power of 2 */ +#define MLX4_EN_TX_POLL_MODER 16 +#define MLX4_EN_TX_POLL_TIMEOUT (HZ / 4) + +#define ETH_LLC_SNAP_SIZE 8 + +#define SMALL_PACKET_SIZE (256 - NET_IP_ALIGN) +#define HEADER_COPY_SIZE (128 - NET_IP_ALIGN) + +#define MLX4_EN_MIN_MTU 46 +#define ETH_BCAST 0xffffffffffffULL + +#ifdef MLX4_EN_PERF_STAT +/* Number of samples to 'average' */ +#define AVG_SIZE 128 +#define AVG_FACTOR 1024 +#define NUM_PERF_STATS NUM_PERF_COUNTERS + +#define INC_PERF_COUNTER(cnt) (++(cnt)) +#define ADD_PERF_COUNTER(cnt, add) ((cnt) += (add)) +#define AVG_PERF_COUNTER(cnt, sample) \ + ((cnt) = ((cnt) * (AVG_SIZE - 1) + (sample) * AVG_FACTOR) / AVG_SIZE) +#define GET_PERF_COUNTER(cnt) (cnt) +#define GET_AVG_PERF_COUNTER(cnt) ((cnt) / AVG_FACTOR) + +#else + +#define NUM_PERF_STATS 0 +#define INC_PERF_COUNTER(cnt) do {} while (0) +#define ADD_PERF_COUNTER(cnt, add) do {} while (0) +#define AVG_PERF_COUNTER(cnt, sample) do {} while (0) +#define GET_PERF_COUNTER(cnt) (0) +#define GET_AVG_PERF_COUNTER(cnt) (0) +#endif /* MLX4_EN_PERF_STAT */ + +/* + * Configurables + */ + +enum cq_type { + RX = 0, + TX = 1, +}; + + +/* + * Useful macros + */ +#define ROUNDUP_LOG2(x) ilog2(roundup_pow_of_two(x)) +#define XNOR(x, y) (!(x) == !(y)) +#define ILLEGAL_MAC(addr) (addr == 0xffffffffffffULL || addr == 0x0) + + +struct mlx4_en_tx_info { + struct sk_buff *skb; + u32 nr_txbb; + u8 linear; + u8 data_offset; +}; + + +#define MLX4_EN_BIT_DESC_OWN 0x80000000 +#define CTRL_SIZE sizeof(struct mlx4_wqe_ctrl_seg) +#define MLX4_EN_MEMTYPE_PAD 0x100 +#define DS_SIZE sizeof(struct mlx4_wqe_data_seg) + + +struct mlx4_en_tx_desc { + struct mlx4_wqe_ctrl_seg ctrl; + union { + struct mlx4_wqe_data_seg data; /* at least one data segment */ + struct mlx4_wqe_lso_seg lso; + struct mlx4_wqe_inline_seg inl; + }; +}; + +#define MLX4_EN_USE_SRQ 0x01000000 + +struct mlx4_en_rx_alloc { + struct page *page; + u16 offset; +}; + +struct mlx4_en_tx_ring { + struct mlx4_hwq_resources wqres; + u32 size ; /* number of TXBBs */ + u32 size_mask; + u16 stride; + u16 cqn; /* index of port CQ associated with this ring */ + u32 prod; + u32 cons; + u32 buf_size; + u32 doorbell_qpn; + void *buf; + u16 poll_cnt; + int blocked; + struct mlx4_en_tx_info *tx_info; + u8 *bounce_buf; + u32 last_nr_txbb; + struct mlx4_qp qp; + struct mlx4_qp_context context; + int qpn; + enum mlx4_qp_state qp_state; + struct mlx4_srq dummy; + unsigned long bytes; + unsigned long packets; + spinlock_t comp_lock; +}; + +struct mlx4_en_rx_desc { + struct mlx4_wqe_srq_next_seg next; + /* actual number of entries depends on rx ring stride */ + struct mlx4_wqe_data_seg data[0]; +}; + +struct mlx4_en_rx_ring { + struct mlx4_srq srq; + struct mlx4_hwq_resources wqres; + struct mlx4_en_rx_alloc page_alloc[MLX4_EN_MAX_RX_FRAGS]; + struct net_lro_mgr lro; + u32 size ; /* number of Rx descs*/ + u32 actual_size; + u32 size_mask; + u16 stride; + u16 log_stride; + u16 cqn; /* index of port CQ associated with this ring */ + u32 prod; + u32 cons; + u32 buf_size; + int need_refill; + int full; + void *buf; + void *rx_info; + unsigned long bytes; + unsigned long packets; +}; + + +static inline int mlx4_en_can_lro(__be16 status) +{ + return (status & cpu_to_be16(MLX4_CQE_STATUS_IPV4 | + MLX4_CQE_STATUS_IPV4F | + MLX4_CQE_STATUS_IPV6 | + MLX4_CQE_STATUS_IPV4OPT | + MLX4_CQE_STATUS_TCP | + MLX4_CQE_STATUS_UDP | + MLX4_CQE_STATUS_IPOK)) == + cpu_to_be16(MLX4_CQE_STATUS_IPV4 | + MLX4_CQE_STATUS_IPOK | + MLX4_CQE_STATUS_TCP); +} + +struct mlx4_en_cq { + struct mlx4_cq mcq; + struct mlx4_hwq_resources wqres; + int ring; + spinlock_t lock; + struct net_device *dev; + struct napi_struct napi; + /* Per-core Tx cq processing support */ + struct timer_list timer; + int size; + int buf_size; + unsigned vector; + enum cq_type is_tx; + u16 moder_time; + u16 moder_cnt; + int armed; + struct mlx4_cqe *buf; +#define MLX4_EN_OPCODE_ERROR 0x1e +}; + +struct mlx4_en_port_profile { + u32 flags; + u32 tx_ring_num; + u32 rx_ring_num; + u32 tx_ring_size; + u32 rx_ring_size; +}; + +struct mlx4_en_profile { + int rss_xor; + int num_lro; + u8 rss_mask; + u32 active_ports; + u32 small_pkt_int; + int rx_moder_cnt; + int rx_moder_time; + int auto_moder; + u8 rx_pause; + u8 rx_ppp; + u8 tx_pause; + u8 tx_ppp; + u8 no_reset; + struct mlx4_en_port_profile prof[MLX4_MAX_PORTS + 1]; +}; + +struct mlx4_en_dev { + struct mlx4_dev *dev; + struct pci_dev *pdev; + struct mutex state_lock; + struct net_device *pndev[MLX4_MAX_PORTS + 1]; + u32 port_cnt; + bool device_up; + struct mlx4_en_profile profile; + u32 LSO_support; + struct workqueue_struct *workqueue; + struct device *dma_device; + void __iomem *uar_map; + struct mlx4_uar priv_uar; + struct mlx4_mr mr; + u32 priv_pdn; + spinlock_t uar_lock; +}; + + +struct mlx4_en_rss_map { + int size; + int base_qpn; + u16 map[MAX_RSS_MAP_SIZE]; + struct mlx4_qp qps[MAX_RSS_MAP_SIZE]; + enum mlx4_qp_state state[MAX_RSS_MAP_SIZE]; + struct mlx4_qp indir_qp; + enum mlx4_qp_state indir_state; +}; + +struct mlx4_en_rss_context { + __be32 base_qpn; + __be32 default_qpn; + u16 reserved; + u8 hash_fn; + u8 flags; + __be32 rss_key[10]; +}; + +struct mlx4_en_pkt_stats { + unsigned long broadcast; + unsigned long rx_prio[8]; + unsigned long tx_prio[8]; +#define NUM_PKT_STATS 17 +}; + +struct mlx4_en_port_stats { + unsigned long lro_aggregated; + unsigned long lro_flushed; + unsigned long lro_no_desc; + unsigned long tso_packets; + unsigned long queue_stopped; + unsigned long wake_queue; + unsigned long tx_timeout; + unsigned long rx_alloc_failed; + unsigned long rx_chksum_good; + unsigned long rx_chksum_none; + unsigned long tx_chksum_offload; +#define NUM_PORT_STATS 11 +}; + +struct mlx4_en_perf_stats { + u32 tx_poll; + u64 tx_pktsz_avg; + u32 inflight_avg; + u16 tx_coal_avg; + u16 rx_coal_avg; + u32 napi_quota; +#define NUM_PERF_COUNTERS 6 +}; + +struct mlx4_en_frag_info { + u16 frag_size; + u16 frag_prefix_size; + u16 frag_stride; + u16 frag_align; + u16 last_offset; + +}; + +struct mlx4_en_priv { + struct mlx4_en_dev *mdev; + struct mlx4_en_port_profile *prof; + struct net_device *dev; + struct vlan_group *vlgrp; + struct net_device_stats stats; + struct net_device_stats ret_stats; + spinlock_t stats_lock; + + unsigned long last_moder_packets; + unsigned long last_moder_tx_packets; + unsigned long last_moder_bytes; + unsigned long last_moder_jiffies; + int last_moder_time; + u16 rx_usecs; + u16 rx_frames; + u16 tx_usecs; + u16 tx_frames; + u32 pkt_rate_low; + u16 rx_usecs_low; + u32 pkt_rate_high; + u16 rx_usecs_high; + u16 sample_interval; + u16 adaptive_rx_coal; + u32 msg_enable; + + struct mlx4_hwq_resources res; + int link_state; + int last_link_state; + bool port_up; + int port; + int registered; + int allocated; + int stride; + int rx_csum; + u64 mac; + int mac_index; + unsigned max_mtu; + int base_qpn; + + struct mlx4_en_rss_map rss_map; + u16 tx_prio_map[8]; + u32 flags; +#define MLX4_EN_FLAG_PROMISC 0x1 + u32 tx_ring_num; + u32 rx_ring_num; + u32 rx_skb_size; + struct mlx4_en_frag_info frag_info[MLX4_EN_MAX_RX_FRAGS]; + u16 num_frags; + u16 log_rx_info; + + struct mlx4_en_tx_ring tx_ring[MAX_TX_RINGS]; + struct mlx4_en_rx_ring rx_ring[MAX_RX_RINGS]; + struct mlx4_en_cq tx_cq[MAX_TX_RINGS]; + struct mlx4_en_cq rx_cq[MAX_RX_RINGS]; + struct work_struct mcast_task; + struct work_struct mac_task; + struct delayed_work refill_task; + struct work_struct watchdog_task; + struct work_struct linkstate_task; + struct delayed_work stats_task; + struct mlx4_en_perf_stats pstats; + struct mlx4_en_pkt_stats pkstats; + struct mlx4_en_port_stats port_stats; + struct dev_mc_list *mc_list; + struct mlx4_en_stat_out_mbox hw_stats; +}; + + +void mlx4_en_destroy_netdev(struct net_device *dev); +int mlx4_en_init_netdev(struct mlx4_en_dev *mdev, int port, + struct mlx4_en_port_profile *prof); + +int mlx4_en_get_profile(struct mlx4_en_dev *mdev); + +int mlx4_en_create_cq(struct mlx4_en_priv *priv, struct mlx4_en_cq *cq, + int entries, int ring, enum cq_type mode); +void mlx4_en_destroy_cq(struct mlx4_en_priv *priv, struct mlx4_en_cq *cq); +int mlx4_en_activate_cq(struct mlx4_en_priv *priv, struct mlx4_en_cq *cq); +void mlx4_en_deactivate_cq(struct mlx4_en_priv *priv, struct mlx4_en_cq *cq); +int mlx4_en_set_cq_moder(struct mlx4_en_priv *priv, struct mlx4_en_cq *cq); +int mlx4_en_arm_cq(struct mlx4_en_priv *priv, struct mlx4_en_cq *cq); + +void mlx4_en_poll_tx_cq(unsigned long data); +void mlx4_en_tx_irq(struct mlx4_cq *mcq); +int mlx4_en_xmit(struct sk_buff *skb, struct net_device *dev); + +int mlx4_en_create_tx_ring(struct mlx4_en_priv *priv, struct mlx4_en_tx_ring *ring, + u32 size, u16 stride); +void mlx4_en_destroy_tx_ring(struct mlx4_en_priv *priv, struct mlx4_en_tx_ring *ring); +int mlx4_en_activate_tx_ring(struct mlx4_en_priv *priv, + struct mlx4_en_tx_ring *ring, + int cq, int srqn); +void mlx4_en_deactivate_tx_ring(struct mlx4_en_priv *priv, + struct mlx4_en_tx_ring *ring); + +int mlx4_en_create_rx_ring(struct mlx4_en_priv *priv, + struct mlx4_en_rx_ring *ring, + u32 size, u16 stride); +void mlx4_en_destroy_rx_ring(struct mlx4_en_priv *priv, + struct mlx4_en_rx_ring *ring); +int mlx4_en_activate_rx_rings(struct mlx4_en_priv *priv); +void mlx4_en_deactivate_rx_ring(struct mlx4_en_priv *priv, + struct mlx4_en_rx_ring *ring); +int mlx4_en_process_rx_cq(struct net_device *dev, + struct mlx4_en_cq *cq, + int budget); +int mlx4_en_poll_rx_cq(struct napi_struct *napi, int budget); +void mlx4_en_fill_qp_context(struct mlx4_en_priv *priv, int size, int stride, + int is_tx, int rss, int qpn, int cqn, int srqn, + struct mlx4_qp_context *context); +int mlx4_en_map_buffer(struct mlx4_buf *buf); +void mlx4_en_unmap_buffer(struct mlx4_buf *buf); + +void mlx4_en_calc_rx_buf(struct net_device *dev); +void mlx4_en_set_default_rss_map(struct mlx4_en_priv *priv, + struct mlx4_en_rss_map *rss_map, + int num_entries, int num_rings); +void mlx4_en_set_prio_map(struct mlx4_en_priv *priv, u16 *prio_map, u32 ring_num); +int mlx4_en_config_rss_steer(struct mlx4_en_priv *priv); +void mlx4_en_release_rss_steer(struct mlx4_en_priv *priv); +int mlx4_en_free_tx_buf(struct net_device *dev, struct mlx4_en_tx_ring *ring); +void mlx4_en_rx_refill(struct work_struct *work); +void mlx4_en_rx_irq(struct mlx4_cq *mcq); + +int mlx4_SET_MCAST_FLTR(struct mlx4_dev *dev, u8 port, u64 mac, u64 clear, u8 mode); +int mlx4_SET_VLAN_FLTR(struct mlx4_dev *dev, u8 port, struct vlan_group *grp); +int mlx4_SET_PORT_general(struct mlx4_dev *dev, u8 port, int mtu, + u8 pptx, u8 pfctx, u8 pprx, u8 pfcrx); +int mlx4_SET_PORT_qpn_calc(struct mlx4_dev *dev, u8 port, u32 base_qpn, + u8 promisc); + +int mlx4_en_DUMP_ETH_STATS(struct mlx4_en_dev *mdev, u8 port, u8 reset); + +/* + * Globals + */ +extern const struct ethtool_ops mlx4_en_ethtool_ops; +#endif diff --git a/drivers/net/mlx4/mr.c b/drivers/net/mlx4/mr.c index d1dd5b48dbd1..0caf74cae8bc 100644 --- a/drivers/net/mlx4/mr.c +++ b/drivers/net/mlx4/mr.c @@ -461,7 +461,7 @@ int mlx4_init_mr_table(struct mlx4_dev *dev) int err; err = mlx4_bitmap_init(&mr_table->mpt_bitmap, dev->caps.num_mpts, - ~0, dev->caps.reserved_mrws); + ~0, dev->caps.reserved_mrws, 0); if (err) return err; diff --git a/drivers/net/mlx4/pd.c b/drivers/net/mlx4/pd.c index aa616892d09c..26d1a7a9e375 100644 --- a/drivers/net/mlx4/pd.c +++ b/drivers/net/mlx4/pd.c @@ -62,7 +62,7 @@ int mlx4_init_pd_table(struct mlx4_dev *dev) struct mlx4_priv *priv = mlx4_priv(dev); return mlx4_bitmap_init(&priv->pd_bitmap, dev->caps.num_pds, - (1 << 24) - 1, dev->caps.reserved_pds); + (1 << 24) - 1, dev->caps.reserved_pds, 0); } void mlx4_cleanup_pd_table(struct mlx4_dev *dev) @@ -100,7 +100,7 @@ int mlx4_init_uar_table(struct mlx4_dev *dev) return mlx4_bitmap_init(&mlx4_priv(dev)->uar_table.bitmap, dev->caps.num_uars, dev->caps.num_uars - 1, - max(128, dev->caps.reserved_uars)); + max(128, dev->caps.reserved_uars), 0); } void mlx4_cleanup_uar_table(struct mlx4_dev *dev) diff --git a/drivers/net/mlx4/port.c b/drivers/net/mlx4/port.c new file mode 100644 index 000000000000..e2fdab42c4ce --- /dev/null +++ b/drivers/net/mlx4/port.c @@ -0,0 +1,282 @@ +/* + * Copyright (c) 2007 Mellanox Technologies. All rights reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the + * OpenIB.org BSD license below: + * + * Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * - Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * + * - Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ + +#include <linux/errno.h> +#include <linux/if_ether.h> + +#include <linux/mlx4/cmd.h> + +#include "mlx4.h" + +#define MLX4_MAC_VALID (1ull << 63) +#define MLX4_MAC_MASK 0xffffffffffffULL + +#define MLX4_VLAN_VALID (1u << 31) +#define MLX4_VLAN_MASK 0xfff + +void mlx4_init_mac_table(struct mlx4_dev *dev, struct mlx4_mac_table *table) +{ + int i; + + mutex_init(&table->mutex); + for (i = 0; i < MLX4_MAX_MAC_NUM; i++) { + table->entries[i] = 0; + table->refs[i] = 0; + } + table->max = 1 << dev->caps.log_num_macs; + table->total = 0; +} + +void mlx4_init_vlan_table(struct mlx4_dev *dev, struct mlx4_vlan_table *table) +{ + int i; + + mutex_init(&table->mutex); + for (i = 0; i < MLX4_MAX_VLAN_NUM; i++) { + table->entries[i] = 0; + table->refs[i] = 0; + } + table->max = 1 << dev->caps.log_num_vlans; + table->total = 0; +} + +static int mlx4_set_port_mac_table(struct mlx4_dev *dev, u8 port, + __be64 *entries) +{ + struct mlx4_cmd_mailbox *mailbox; + u32 in_mod; + int err; + + mailbox = mlx4_alloc_cmd_mailbox(dev); + if (IS_ERR(mailbox)) + return PTR_ERR(mailbox); + + memcpy(mailbox->buf, entries, MLX4_MAC_TABLE_SIZE); + + in_mod = MLX4_SET_PORT_MAC_TABLE << 8 | port; + err = mlx4_cmd(dev, mailbox->dma, in_mod, 1, MLX4_CMD_SET_PORT, + MLX4_CMD_TIME_CLASS_B); + + mlx4_free_cmd_mailbox(dev, mailbox); + return err; +} + +int mlx4_register_mac(struct mlx4_dev *dev, u8 port, u64 mac, int *index) +{ + struct mlx4_mac_table *table = &mlx4_priv(dev)->port[port].mac_table; + int i, err = 0; + int free = -1; + + mlx4_dbg(dev, "Registering MAC: 0x%llx\n", (unsigned long long) mac); + mutex_lock(&table->mutex); + for (i = 0; i < MLX4_MAX_MAC_NUM - 1; i++) { + if (free < 0 && !table->refs[i]) { + free = i; + continue; + } + + if (mac == (MLX4_MAC_MASK & be64_to_cpu(table->entries[i]))) { + /* MAC already registered, increase refernce count */ + *index = i; + ++table->refs[i]; + goto out; + } + } + mlx4_dbg(dev, "Free MAC index is %d\n", free); + + if (table->total == table->max) { + /* No free mac entries */ + err = -ENOSPC; + goto out; + } + + /* Register new MAC */ + table->refs[free] = 1; + table->entries[free] = cpu_to_be64(mac | MLX4_MAC_VALID); + + err = mlx4_set_port_mac_table(dev, port, table->entries); + if (unlikely(err)) { + mlx4_err(dev, "Failed adding MAC: 0x%llx\n", (unsigned long long) mac); + table->refs[free] = 0; + table->entries[free] = 0; + goto out; + } + + *index = free; + ++table->total; +out: + mutex_unlock(&table->mutex); + return err; +} +EXPORT_SYMBOL_GPL(mlx4_register_mac); + +void mlx4_unregister_mac(struct mlx4_dev *dev, u8 port, int index) +{ + struct mlx4_mac_table *table = &mlx4_priv(dev)->port[port].mac_table; + + mutex_lock(&table->mutex); + if (!table->refs[index]) { + mlx4_warn(dev, "No MAC entry for index %d\n", index); + goto out; + } + if (--table->refs[index]) { + mlx4_warn(dev, "Have more references for index %d," + "no need to modify MAC table\n", index); + goto out; + } + table->entries[index] = 0; + mlx4_set_port_mac_table(dev, port, table->entries); + --table->total; +out: + mutex_unlock(&table->mutex); +} +EXPORT_SYMBOL_GPL(mlx4_unregister_mac); + +static int mlx4_set_port_vlan_table(struct mlx4_dev *dev, u8 port, + __be32 *entries) +{ + struct mlx4_cmd_mailbox *mailbox; + u32 in_mod; + int err; + + mailbox = mlx4_alloc_cmd_mailbox(dev); + if (IS_ERR(mailbox)) + return PTR_ERR(mailbox); + + memcpy(mailbox->buf, entries, MLX4_VLAN_TABLE_SIZE); + in_mod = MLX4_SET_PORT_VLAN_TABLE << 8 | port; + err = mlx4_cmd(dev, mailbox->dma, in_mod, 1, MLX4_CMD_SET_PORT, + MLX4_CMD_TIME_CLASS_B); + + mlx4_free_cmd_mailbox(dev, mailbox); + + return err; +} + +int mlx4_register_vlan(struct mlx4_dev *dev, u8 port, u16 vlan, int *index) +{ + struct mlx4_vlan_table *table = &mlx4_priv(dev)->port[port].vlan_table; + int i, err = 0; + int free = -1; + + mutex_lock(&table->mutex); + for (i = MLX4_VLAN_REGULAR; i < MLX4_MAX_VLAN_NUM; i++) { + if (free < 0 && (table->refs[i] == 0)) { + free = i; + continue; + } + + if (table->refs[i] && + (vlan == (MLX4_VLAN_MASK & + be32_to_cpu(table->entries[i])))) { + /* Vlan already registered, increase refernce count */ + *index = i; + ++table->refs[i]; + goto out; + } + } + + if (table->total == table->max) { + /* No free vlan entries */ + err = -ENOSPC; + goto out; + } + + /* Register new MAC */ + table->refs[free] = 1; + table->entries[free] = cpu_to_be32(vlan | MLX4_VLAN_VALID); + + err = mlx4_set_port_vlan_table(dev, port, table->entries); + if (unlikely(err)) { + mlx4_warn(dev, "Failed adding vlan: %u\n", vlan); + table->refs[free] = 0; + table->entries[free] = 0; + goto out; + } + + *index = free; + ++table->total; +out: + mutex_unlock(&table->mutex); + return err; +} +EXPORT_SYMBOL_GPL(mlx4_register_vlan); + +void mlx4_unregister_vlan(struct mlx4_dev *dev, u8 port, int index) +{ + struct mlx4_vlan_table *table = &mlx4_priv(dev)->port[port].vlan_table; + + if (index < MLX4_VLAN_REGULAR) { + mlx4_warn(dev, "Trying to free special vlan index %d\n", index); + return; + } + + mutex_lock(&table->mutex); + if (!table->refs[index]) { + mlx4_warn(dev, "No vlan entry for index %d\n", index); + goto out; + } + if (--table->refs[index]) { + mlx4_dbg(dev, "Have more references for index %d," + "no need to modify vlan table\n", index); + goto out; + } + table->entries[index] = 0; + mlx4_set_port_vlan_table(dev, port, table->entries); + --table->total; +out: + mutex_unlock(&table->mutex); +} +EXPORT_SYMBOL_GPL(mlx4_unregister_vlan); + +int mlx4_SET_PORT(struct mlx4_dev *dev, u8 port) +{ + struct mlx4_cmd_mailbox *mailbox; + int err; + u8 is_eth = dev->caps.port_type[port] == MLX4_PORT_TYPE_ETH; + + mailbox = mlx4_alloc_cmd_mailbox(dev); + if (IS_ERR(mailbox)) + return PTR_ERR(mailbox); + + memset(mailbox->buf, 0, 256); + if (is_eth) { + ((u8 *) mailbox->buf)[3] = 6; + ((__be16 *) mailbox->buf)[4] = cpu_to_be16(1 << 15); + ((__be16 *) mailbox->buf)[6] = cpu_to_be16(1 << 15); + } + err = mlx4_cmd(dev, mailbox->dma, port, is_eth, MLX4_CMD_SET_PORT, + MLX4_CMD_TIME_CLASS_B); + + mlx4_free_cmd_mailbox(dev, mailbox); + return err; +} diff --git a/drivers/net/mlx4/qp.c b/drivers/net/mlx4/qp.c index c49a86044bf7..1c565ef8d179 100644 --- a/drivers/net/mlx4/qp.c +++ b/drivers/net/mlx4/qp.c @@ -147,19 +147,42 @@ int mlx4_qp_modify(struct mlx4_dev *dev, struct mlx4_mtt *mtt, } EXPORT_SYMBOL_GPL(mlx4_qp_modify); -int mlx4_qp_alloc(struct mlx4_dev *dev, int sqpn, struct mlx4_qp *qp) +int mlx4_qp_reserve_range(struct mlx4_dev *dev, int cnt, int align, int *base) +{ + struct mlx4_priv *priv = mlx4_priv(dev); + struct mlx4_qp_table *qp_table = &priv->qp_table; + int qpn; + + qpn = mlx4_bitmap_alloc_range(&qp_table->bitmap, cnt, align); + if (qpn == -1) + return -ENOMEM; + + *base = qpn; + return 0; +} +EXPORT_SYMBOL_GPL(mlx4_qp_reserve_range); + +void mlx4_qp_release_range(struct mlx4_dev *dev, int base_qpn, int cnt) +{ + struct mlx4_priv *priv = mlx4_priv(dev); + struct mlx4_qp_table *qp_table = &priv->qp_table; + if (base_qpn < dev->caps.sqp_start + 8) + return; + + mlx4_bitmap_free_range(&qp_table->bitmap, base_qpn, cnt); +} +EXPORT_SYMBOL_GPL(mlx4_qp_release_range); + +int mlx4_qp_alloc(struct mlx4_dev *dev, int qpn, struct mlx4_qp *qp) { struct mlx4_priv *priv = mlx4_priv(dev); struct mlx4_qp_table *qp_table = &priv->qp_table; int err; - if (sqpn) - qp->qpn = sqpn; - else { - qp->qpn = mlx4_bitmap_alloc(&qp_table->bitmap); - if (qp->qpn == -1) - return -ENOMEM; - } + if (!qpn) + return -EINVAL; + + qp->qpn = qpn; err = mlx4_table_get(dev, &qp_table->qp_table, qp->qpn); if (err) @@ -208,9 +231,6 @@ err_put_qp: mlx4_table_put(dev, &qp_table->qp_table, qp->qpn); err_out: - if (!sqpn) - mlx4_bitmap_free(&qp_table->bitmap, qp->qpn); - return err; } EXPORT_SYMBOL_GPL(mlx4_qp_alloc); @@ -239,9 +259,6 @@ void mlx4_qp_free(struct mlx4_dev *dev, struct mlx4_qp *qp) mlx4_table_put(dev, &qp_table->altc_table, qp->qpn); mlx4_table_put(dev, &qp_table->auxc_table, qp->qpn); mlx4_table_put(dev, &qp_table->qp_table, qp->qpn); - - if (qp->qpn >= dev->caps.sqp_start + 8) - mlx4_bitmap_free(&qp_table->bitmap, qp->qpn); } EXPORT_SYMBOL_GPL(mlx4_qp_free); @@ -255,6 +272,7 @@ int mlx4_init_qp_table(struct mlx4_dev *dev) { struct mlx4_qp_table *qp_table = &mlx4_priv(dev)->qp_table; int err; + int reserved_from_top = 0; spin_lock_init(&qp_table->lock); INIT_RADIX_TREE(&dev->qp_table_tree, GFP_ATOMIC); @@ -264,9 +282,40 @@ int mlx4_init_qp_table(struct mlx4_dev *dev) * block of special QPs must be aligned to a multiple of 8, so * round up. */ - dev->caps.sqp_start = ALIGN(dev->caps.reserved_qps, 8); + dev->caps.sqp_start = + ALIGN(dev->caps.reserved_qps_cnt[MLX4_QP_REGION_FW], 8); + + { + int sort[MLX4_NUM_QP_REGION]; + int i, j, tmp; + int last_base = dev->caps.num_qps; + + for (i = 1; i < MLX4_NUM_QP_REGION; ++i) + sort[i] = i; + + for (i = MLX4_NUM_QP_REGION; i > 0; --i) { + for (j = 2; j < i; ++j) { + if (dev->caps.reserved_qps_cnt[sort[j]] > + dev->caps.reserved_qps_cnt[sort[j - 1]]) { + tmp = sort[j]; + sort[j] = sort[j - 1]; + sort[j - 1] = tmp; + } + } + } + + for (i = 1; i < MLX4_NUM_QP_REGION; ++i) { + last_base -= dev->caps.reserved_qps_cnt[sort[i]]; + dev->caps.reserved_qps_base[sort[i]] = last_base; + reserved_from_top += + dev->caps.reserved_qps_cnt[sort[i]]; + } + + } + err = mlx4_bitmap_init(&qp_table->bitmap, dev->caps.num_qps, - (1 << 24) - 1, dev->caps.sqp_start + 8); + (1 << 23) - 1, dev->caps.sqp_start + 8, + reserved_from_top); if (err) return err; diff --git a/drivers/net/mlx4/srq.c b/drivers/net/mlx4/srq.c index 533eb6db24b3..fe9f218691f5 100644 --- a/drivers/net/mlx4/srq.c +++ b/drivers/net/mlx4/srq.c @@ -245,7 +245,7 @@ int mlx4_init_srq_table(struct mlx4_dev *dev) INIT_RADIX_TREE(&srq_table->tree, GFP_ATOMIC); err = mlx4_bitmap_init(&srq_table->bitmap, dev->caps.num_srqs, - dev->caps.num_srqs - 1, dev->caps.reserved_srqs); + dev->caps.num_srqs - 1, dev->caps.reserved_srqs, 0); if (err) return err; diff --git a/drivers/net/xtsonic.c b/drivers/net/xtsonic.c new file mode 100644 index 000000000000..da42aa06a3ba --- /dev/null +++ b/drivers/net/xtsonic.c @@ -0,0 +1,319 @@ +/* + * xtsonic.c + * + * (C) 2001 - 2007 Tensilica Inc. + * Kevin Chea <kchea@yahoo.com> + * Marc Gauthier <marc@linux-xtensa.org> + * Chris Zankel <chris@zankel.net> + * + * (C) 1996,1998 by Thomas Bogendoerfer (tsbogend@alpha.franken.de) + * + * This driver is based on work from Andreas Busse, but most of + * the code is rewritten. + * + * (C) 1995 by Andreas Busse (andy@waldorf-gmbh.de) + * + * A driver for the onboard Sonic ethernet controller on the XT2000. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/types.h> +#include <linux/fcntl.h> +#include <linux/interrupt.h> +#include <linux/init.h> +#include <linux/ioport.h> +#include <linux/in.h> +#include <linux/slab.h> +#include <linux/string.h> +#include <linux/delay.h> +#include <linux/errno.h> +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/skbuff.h> +#include <linux/platform_device.h> +#include <linux/dma-mapping.h> + +#include <asm/io.h> +#include <asm/pgtable.h> +#include <asm/dma.h> + +static char xtsonic_string[] = "xtsonic"; + +extern unsigned xtboard_nvram_valid(void); +extern void xtboard_get_ether_addr(unsigned char *buf); + +#include "sonic.h" + +/* + * According to the documentation for the Sonic ethernet controller, + * EOBC should be 760 words (1520 bytes) for 32-bit applications, and, + * as such, 2 words less than the buffer size. The value for RBSIZE + * defined in sonic.h, however is only 1520. + * + * (Note that in 16-bit configurations, EOBC is 759 words (1518 bytes) and + * RBSIZE 1520 bytes) + */ +#undef SONIC_RBSIZE +#define SONIC_RBSIZE 1524 + +/* + * The chip provides 256 byte register space. + */ +#define SONIC_MEM_SIZE 0x100 + +/* + * Macros to access SONIC registers + */ +#define SONIC_READ(reg) \ + (0xffff & *((volatile unsigned int *)dev->base_addr+reg)) + +#define SONIC_WRITE(reg,val) \ + *((volatile unsigned int *)dev->base_addr+reg) = val + + +/* Use 0 for production, 1 for verification, and >2 for debug */ +#ifdef SONIC_DEBUG +static unsigned int sonic_debug = SONIC_DEBUG; +#else +static unsigned int sonic_debug = 1; +#endif + +/* + * We cannot use station (ethernet) address prefixes to detect the + * sonic controller since these are board manufacturer depended. + * So we check for known Silicon Revision IDs instead. + */ +static unsigned short known_revisions[] = +{ + 0x101, /* SONIC 83934 */ + 0xffff /* end of list */ +}; + +static int xtsonic_open(struct net_device *dev) +{ + if (request_irq(dev->irq,&sonic_interrupt,IRQF_DISABLED,"sonic",dev)) { + printk(KERN_ERR "%s: unable to get IRQ %d.\n", + dev->name, dev->irq); + return -EAGAIN; + } + return sonic_open(dev); +} + +static int xtsonic_close(struct net_device *dev) +{ + int err; + err = sonic_close(dev); + free_irq(dev->irq, dev); + return err; +} + +static int __init sonic_probe1(struct net_device *dev) +{ + static unsigned version_printed = 0; + unsigned int silicon_revision; + struct sonic_local *lp = netdev_priv(dev); + unsigned int base_addr = dev->base_addr; + int i; + int err = 0; + + if (!request_mem_region(base_addr, 0x100, xtsonic_string)) + return -EBUSY; + + /* + * get the Silicon Revision ID. If this is one of the known + * one assume that we found a SONIC ethernet controller at + * the expected location. + */ + silicon_revision = SONIC_READ(SONIC_SR); + if (sonic_debug > 1) + printk("SONIC Silicon Revision = 0x%04x\n",silicon_revision); + + i = 0; + while ((known_revisions[i] != 0xffff) && + (known_revisions[i] != silicon_revision)) + i++; + + if (known_revisions[i] == 0xffff) { + printk("SONIC ethernet controller not found (0x%4x)\n", + silicon_revision); + return -ENODEV; + } + + if (sonic_debug && version_printed++ == 0) + printk(version); + + /* + * Put the sonic into software reset, then retrieve ethernet address. + * Note: we are assuming that the boot-loader has initialized the cam. + */ + SONIC_WRITE(SONIC_CMD,SONIC_CR_RST); + SONIC_WRITE(SONIC_DCR, + SONIC_DCR_WC0|SONIC_DCR_DW|SONIC_DCR_LBR|SONIC_DCR_SBUS); + SONIC_WRITE(SONIC_CEP,0); + SONIC_WRITE(SONIC_IMR,0); + + SONIC_WRITE(SONIC_CMD,SONIC_CR_RST); + SONIC_WRITE(SONIC_CEP,0); + + for (i=0; i<3; i++) { + unsigned int val = SONIC_READ(SONIC_CAP0-i); + dev->dev_addr[i*2] = val; + dev->dev_addr[i*2+1] = val >> 8; + } + + /* Initialize the device structure. */ + + lp->dma_bitmode = SONIC_BITMODE32; + + /* + * Allocate local private descriptor areas in uncached space. + * The entire structure must be located within the same 64kb segment. + * A simple way to ensure this is to allocate twice the + * size of the structure -- given that the structure is + * much less than 64 kB, at least one of the halves of + * the allocated area will be contained entirely in 64 kB. + * We also allocate extra space for a pointer to allow freeing + * this structure later on (in xtsonic_cleanup_module()). + */ + lp->descriptors = + dma_alloc_coherent(lp->device, + SIZEOF_SONIC_DESC * SONIC_BUS_SCALE(lp->dma_bitmode), + &lp->descriptors_laddr, GFP_KERNEL); + + if (lp->descriptors == NULL) { + printk(KERN_ERR "%s: couldn't alloc DMA memory for " + " descriptors.\n", lp->device->bus_id); + goto out; + } + + lp->cda = lp->descriptors; + lp->tda = lp->cda + (SIZEOF_SONIC_CDA + * SONIC_BUS_SCALE(lp->dma_bitmode)); + lp->rda = lp->tda + (SIZEOF_SONIC_TD * SONIC_NUM_TDS + * SONIC_BUS_SCALE(lp->dma_bitmode)); + lp->rra = lp->rda + (SIZEOF_SONIC_RD * SONIC_NUM_RDS + * SONIC_BUS_SCALE(lp->dma_bitmode)); + + /* get the virtual dma address */ + + lp->cda_laddr = lp->descriptors_laddr; + lp->tda_laddr = lp->cda_laddr + (SIZEOF_SONIC_CDA + * SONIC_BUS_SCALE(lp->dma_bitmode)); + lp->rda_laddr = lp->tda_laddr + (SIZEOF_SONIC_TD * SONIC_NUM_TDS + * SONIC_BUS_SCALE(lp->dma_bitmode)); + lp->rra_laddr = lp->rda_laddr + (SIZEOF_SONIC_RD * SONIC_NUM_RDS + * SONIC_BUS_SCALE(lp->dma_bitmode)); + + dev->open = xtsonic_open; + dev->stop = xtsonic_close; + dev->hard_start_xmit = sonic_send_packet; + dev->get_stats = sonic_get_stats; + dev->set_multicast_list = &sonic_multicast_list; + dev->tx_timeout = sonic_tx_timeout; + dev->watchdog_timeo = TX_TIMEOUT; + + /* + * clear tally counter + */ + SONIC_WRITE(SONIC_CRCT,0xffff); + SONIC_WRITE(SONIC_FAET,0xffff); + SONIC_WRITE(SONIC_MPT,0xffff); + + return 0; +out: + release_region(dev->base_addr, SONIC_MEM_SIZE); + return err; +} + + +/* + * Probe for a SONIC ethernet controller on an XT2000 board. + * Actually probing is superfluous but we're paranoid. + */ + +int __init xtsonic_probe(struct platform_device *pdev) +{ + struct net_device *dev; + struct sonic_local *lp; + struct resource *resmem, *resirq; + int err = 0; + + DECLARE_MAC_BUF(mac); + + if ((resmem = platform_get_resource(pdev, IORESOURCE_MEM, 0)) == NULL) + return -ENODEV; + + if ((resirq = platform_get_resource(pdev, IORESOURCE_IRQ, 0)) == NULL) + return -ENODEV; + + if ((dev = alloc_etherdev(sizeof(struct sonic_local))) == NULL) + return -ENOMEM; + + lp = netdev_priv(dev); + lp->device = &pdev->dev; + SET_NETDEV_DEV(dev, &pdev->dev); + netdev_boot_setup_check(dev); + + dev->base_addr = resmem->start; + dev->irq = resirq->start; + + if ((err = sonic_probe1(dev))) + goto out; + if ((err = register_netdev(dev))) + goto out1; + + printk("%s: SONIC ethernet @%08lx, MAC %s, IRQ %d\n", dev->name, + dev->base_addr, print_mac(mac, dev->dev_addr), dev->irq); + + return 0; + +out1: + release_region(dev->base_addr, SONIC_MEM_SIZE); +out: + free_netdev(dev); + + return err; +} + +MODULE_DESCRIPTION("Xtensa XT2000 SONIC ethernet driver"); +module_param(sonic_debug, int, 0); +MODULE_PARM_DESC(sonic_debug, "xtsonic debug level (1-4)"); + +#include "sonic.c" + +static int __devexit xtsonic_device_remove (struct platform_device *pdev) +{ + struct net_device *dev = platform_get_drvdata(pdev); + struct sonic_local *lp = netdev_priv(dev); + + unregister_netdev(dev); + dma_free_coherent(lp->device, + SIZEOF_SONIC_DESC * SONIC_BUS_SCALE(lp->dma_bitmode), + lp->descriptors, lp->descriptors_laddr); + release_region (dev->base_addr, SONIC_MEM_SIZE); + free_netdev(dev); + + return 0; +} + +static struct platform_driver xtsonic_driver = { + .probe = xtsonic_probe, + .remove = __devexit_p(xtsonic_device_remove), + .driver = { + .name = xtsonic_string, + }, +}; + +static int __init xtsonic_init(void) +{ + return platform_driver_register(&xtsonic_driver); +} + +static void __exit xtsonic_cleanup(void) +{ + platform_driver_unregister(&xtsonic_driver); +} + +module_init(xtsonic_init); +module_exit(xtsonic_cleanup); diff --git a/drivers/of/of_i2c.c b/drivers/of/of_i2c.c index 6a98dc8aa30b..24bbef777c19 100644 --- a/drivers/of/of_i2c.c +++ b/drivers/of/of_i2c.c @@ -41,7 +41,7 @@ void of_register_i2c_devices(struct i2c_adapter *adap, info.addr = *addr; - request_module(info.type); + request_module("%s", info.type); result = i2c_new_device(adap, &info); if (result == NULL) { diff --git a/drivers/of/of_spi.c b/drivers/of/of_spi.c index b01eec026f68..bed0ed6dcdc1 100644 --- a/drivers/of/of_spi.c +++ b/drivers/of/of_spi.c @@ -61,6 +61,8 @@ void of_register_spi_devices(struct spi_master *master, struct device_node *np) spi->mode |= SPI_CPHA; if (of_find_property(nc, "spi-cpol", NULL)) spi->mode |= SPI_CPOL; + if (of_find_property(nc, "spi-cs-high", NULL)) + spi->mode |= SPI_CS_HIGH; /* Device speed */ prop = of_get_property(nc, "spi-max-frequency", &len); diff --git a/drivers/oprofile/buffer_sync.c b/drivers/oprofile/buffer_sync.c index ed982273fb8b..b55cd23ffdef 100644 --- a/drivers/oprofile/buffer_sync.c +++ b/drivers/oprofile/buffer_sync.c @@ -41,7 +41,6 @@ static cpumask_t marked_cpus = CPU_MASK_NONE; static DEFINE_SPINLOCK(task_mortuary); static void process_task_mortuary(void); - /* Take ownership of the task struct and place it on the * list for processing. Only after two full buffer syncs * does the task eventually get freed, because by then @@ -341,7 +340,7 @@ static void add_trace_begin(void) * Add IBS fetch and op entries to event buffer */ static void add_ibs_begin(struct oprofile_cpu_buffer *cpu_buf, int code, - int in_kernel, struct mm_struct *mm) + struct mm_struct *mm) { unsigned long rip; int i, count; @@ -565,9 +564,11 @@ void sync_buffer(int cpu) struct task_struct *new; unsigned long cookie = 0; int in_kernel = 1; - unsigned int i; sync_buffer_state state = sb_buffer_start; +#ifndef CONFIG_OPROFILE_IBS + unsigned int i; unsigned long available; +#endif mutex_lock(&buffer_mutex); @@ -575,9 +576,13 @@ void sync_buffer(int cpu) /* Remember, only we can modify tail_pos */ +#ifndef CONFIG_OPROFILE_IBS available = get_slots(cpu_buf); for (i = 0; i < available; ++i) { +#else + while (get_slots(cpu_buf)) { +#endif struct op_sample *s = &cpu_buf->buffer[cpu_buf->tail_pos]; if (is_code(s->eip)) { @@ -593,12 +598,10 @@ void sync_buffer(int cpu) #ifdef CONFIG_OPROFILE_IBS } else if (s->event == IBS_FETCH_BEGIN) { state = sb_bt_start; - add_ibs_begin(cpu_buf, - IBS_FETCH_CODE, in_kernel, mm); + add_ibs_begin(cpu_buf, IBS_FETCH_CODE, mm); } else if (s->event == IBS_OP_BEGIN) { state = sb_bt_start; - add_ibs_begin(cpu_buf, - IBS_OP_CODE, in_kernel, mm); + add_ibs_begin(cpu_buf, IBS_OP_CODE, mm); #endif } else { struct mm_struct *oldmm = mm; @@ -628,3 +631,27 @@ void sync_buffer(int cpu) mutex_unlock(&buffer_mutex); } + +/* The function can be used to add a buffer worth of data directly to + * the kernel buffer. The buffer is assumed to be a circular buffer. + * Take the entries from index start and end at index end, wrapping + * at max_entries. + */ +void oprofile_put_buff(unsigned long *buf, unsigned int start, + unsigned int stop, unsigned int max) +{ + int i; + + i = start; + + mutex_lock(&buffer_mutex); + while (i != stop) { + add_event_entry(buf[i++]); + + if (i >= max) + i = 0; + } + + mutex_unlock(&buffer_mutex); +} + diff --git a/drivers/oprofile/buffer_sync.h b/drivers/oprofile/buffer_sync.h index 08866f6a96a3..3110732c1835 100644 --- a/drivers/oprofile/buffer_sync.h +++ b/drivers/oprofile/buffer_sync.h @@ -9,13 +9,13 @@ #ifndef OPROFILE_BUFFER_SYNC_H #define OPROFILE_BUFFER_SYNC_H - + /* add the necessary profiling hooks */ int sync_start(void); /* remove the hooks */ void sync_stop(void); - + /* sync the given CPU's buffer */ void sync_buffer(int cpu); diff --git a/drivers/oprofile/cpu_buffer.c b/drivers/oprofile/cpu_buffer.c index e1bd5a937f6c..01d38e78cde1 100644 --- a/drivers/oprofile/cpu_buffer.c +++ b/drivers/oprofile/cpu_buffer.c @@ -22,7 +22,7 @@ #include <linux/oprofile.h> #include <linux/vmalloc.h> #include <linux/errno.h> - + #include "event_buffer.h" #include "cpu_buffer.h" #include "buffer_sync.h" @@ -38,27 +38,40 @@ static int work_enabled; void free_cpu_buffers(void) { int i; - - for_each_online_cpu(i) { + + for_each_possible_cpu(i) { vfree(per_cpu(cpu_buffer, i).buffer); per_cpu(cpu_buffer, i).buffer = NULL; } } +unsigned long oprofile_get_cpu_buffer_size(void) +{ + return fs_cpu_buffer_size; +} + +void oprofile_cpu_buffer_inc_smpl_lost(void) +{ + struct oprofile_cpu_buffer *cpu_buf + = &__get_cpu_var(cpu_buffer); + + cpu_buf->sample_lost_overflow++; +} + int alloc_cpu_buffers(void) { int i; - + unsigned long buffer_size = fs_cpu_buffer_size; - - for_each_online_cpu(i) { + + for_each_possible_cpu(i) { struct oprofile_cpu_buffer *b = &per_cpu(cpu_buffer, i); - + b->buffer = vmalloc_node(sizeof(struct op_sample) * buffer_size, cpu_to_node(i)); if (!b->buffer) goto fail; - + b->last_task = NULL; b->last_is_kernel = -1; b->tracing = 0; @@ -112,7 +125,7 @@ void end_cpu_work(void) } /* Resets the cpu buffer to a sane state. */ -void cpu_buffer_reset(struct oprofile_cpu_buffer * cpu_buf) +void cpu_buffer_reset(struct oprofile_cpu_buffer *cpu_buf) { /* reset these to invalid values; the next sample * collected will populate the buffer with proper @@ -123,7 +136,7 @@ void cpu_buffer_reset(struct oprofile_cpu_buffer * cpu_buf) } /* compute number of available slots in cpu_buffer queue */ -static unsigned long nr_available_slots(struct oprofile_cpu_buffer const * b) +static unsigned long nr_available_slots(struct oprofile_cpu_buffer const *b) { unsigned long head = b->head_pos; unsigned long tail = b->tail_pos; @@ -134,7 +147,7 @@ static unsigned long nr_available_slots(struct oprofile_cpu_buffer const * b) return tail + (b->buffer_size - head) - 1; } -static void increment_head(struct oprofile_cpu_buffer * b) +static void increment_head(struct oprofile_cpu_buffer *b) { unsigned long new_head = b->head_pos + 1; @@ -149,17 +162,17 @@ static void increment_head(struct oprofile_cpu_buffer * b) } static inline void -add_sample(struct oprofile_cpu_buffer * cpu_buf, - unsigned long pc, unsigned long event) +add_sample(struct oprofile_cpu_buffer *cpu_buf, + unsigned long pc, unsigned long event) { - struct op_sample * entry = &cpu_buf->buffer[cpu_buf->head_pos]; + struct op_sample *entry = &cpu_buf->buffer[cpu_buf->head_pos]; entry->eip = pc; entry->event = event; increment_head(cpu_buf); } static inline void -add_code(struct oprofile_cpu_buffer * buffer, unsigned long value) +add_code(struct oprofile_cpu_buffer *buffer, unsigned long value) { add_sample(buffer, ESCAPE_CODE, value); } @@ -173,10 +186,10 @@ add_code(struct oprofile_cpu_buffer * buffer, unsigned long value) * pc. We tag this in the buffer by generating kernel enter/exit * events whenever is_kernel changes */ -static int log_sample(struct oprofile_cpu_buffer * cpu_buf, unsigned long pc, +static int log_sample(struct oprofile_cpu_buffer *cpu_buf, unsigned long pc, int is_kernel, unsigned long event) { - struct task_struct * task; + struct task_struct *task; cpu_buf->sample_received++; @@ -205,7 +218,7 @@ static int log_sample(struct oprofile_cpu_buffer * cpu_buf, unsigned long pc, cpu_buf->last_task = task; add_code(cpu_buf, (unsigned long)task); } - + add_sample(cpu_buf, pc, event); return 1; } @@ -222,7 +235,7 @@ static int oprofile_begin_trace(struct oprofile_cpu_buffer *cpu_buf) return 1; } -static void oprofile_end_trace(struct oprofile_cpu_buffer * cpu_buf) +static void oprofile_end_trace(struct oprofile_cpu_buffer *cpu_buf) { cpu_buf->tracing = 0; } @@ -257,21 +270,23 @@ void oprofile_add_sample(struct pt_regs * const regs, unsigned long event) #ifdef CONFIG_OPROFILE_IBS -#define MAX_IBS_SAMPLE_SIZE 14 -static int log_ibs_sample(struct oprofile_cpu_buffer *cpu_buf, - unsigned long pc, int is_kernel, unsigned int *ibs, int ibs_code) +#define MAX_IBS_SAMPLE_SIZE 14 + +void oprofile_add_ibs_sample(struct pt_regs *const regs, + unsigned int *const ibs_sample, int ibs_code) { + int is_kernel = !user_mode(regs); + struct oprofile_cpu_buffer *cpu_buf = &__get_cpu_var(cpu_buffer); struct task_struct *task; cpu_buf->sample_received++; if (nr_available_slots(cpu_buf) < MAX_IBS_SAMPLE_SIZE) { + /* we can't backtrace since we lost the source of this event */ cpu_buf->sample_lost_overflow++; - return 0; + return; } - is_kernel = !!is_kernel; - /* notice a switch from user->kernel or vice versa */ if (cpu_buf->last_is_kernel != is_kernel) { cpu_buf->last_is_kernel = is_kernel; @@ -281,7 +296,6 @@ static int log_ibs_sample(struct oprofile_cpu_buffer *cpu_buf, /* notice a task switch */ if (!is_kernel) { task = current; - if (cpu_buf->last_task != task) { cpu_buf->last_task = task; add_code(cpu_buf, (unsigned long)task); @@ -289,36 +303,17 @@ static int log_ibs_sample(struct oprofile_cpu_buffer *cpu_buf, } add_code(cpu_buf, ibs_code); - add_sample(cpu_buf, ibs[0], ibs[1]); - add_sample(cpu_buf, ibs[2], ibs[3]); - add_sample(cpu_buf, ibs[4], ibs[5]); + add_sample(cpu_buf, ibs_sample[0], ibs_sample[1]); + add_sample(cpu_buf, ibs_sample[2], ibs_sample[3]); + add_sample(cpu_buf, ibs_sample[4], ibs_sample[5]); if (ibs_code == IBS_OP_BEGIN) { - add_sample(cpu_buf, ibs[6], ibs[7]); - add_sample(cpu_buf, ibs[8], ibs[9]); - add_sample(cpu_buf, ibs[10], ibs[11]); - } - - return 1; -} - -void oprofile_add_ibs_sample(struct pt_regs *const regs, - unsigned int * const ibs_sample, u8 code) -{ - int is_kernel = !user_mode(regs); - unsigned long pc = profile_pc(regs); - - struct oprofile_cpu_buffer *cpu_buf = - &per_cpu(cpu_buffer, smp_processor_id()); - - if (!backtrace_depth) { - log_ibs_sample(cpu_buf, pc, is_kernel, ibs_sample, code); - return; + add_sample(cpu_buf, ibs_sample[6], ibs_sample[7]); + add_sample(cpu_buf, ibs_sample[8], ibs_sample[9]); + add_sample(cpu_buf, ibs_sample[10], ibs_sample[11]); } - /* if log_sample() fails we can't backtrace since we lost the source - * of this event */ - if (log_ibs_sample(cpu_buf, pc, is_kernel, ibs_sample, code)) + if (backtrace_depth) oprofile_ops.backtrace(regs, backtrace_depth); } @@ -363,11 +358,16 @@ void oprofile_add_trace(unsigned long pc) */ static void wq_sync_buffer(struct work_struct *work) { - struct oprofile_cpu_buffer * b = + struct oprofile_cpu_buffer *b = container_of(work, struct oprofile_cpu_buffer, work.work); if (b->cpu != smp_processor_id()) { printk(KERN_DEBUG "WQ on CPU%d, prefer CPU%d\n", smp_processor_id(), b->cpu); + + if (!cpu_online(b->cpu)) { + cancel_delayed_work(&b->work); + return; + } } sync_buffer(b->cpu); diff --git a/drivers/oprofile/cpu_buffer.h b/drivers/oprofile/cpu_buffer.h index 9c44d004da69..d3cc26264db5 100644 --- a/drivers/oprofile/cpu_buffer.h +++ b/drivers/oprofile/cpu_buffer.h @@ -15,9 +15,9 @@ #include <linux/workqueue.h> #include <linux/cache.h> #include <linux/sched.h> - + struct task_struct; - + int alloc_cpu_buffers(void); void free_cpu_buffers(void); @@ -31,15 +31,15 @@ struct op_sample { unsigned long eip; unsigned long event; }; - + struct oprofile_cpu_buffer { volatile unsigned long head_pos; volatile unsigned long tail_pos; unsigned long buffer_size; - struct task_struct * last_task; + struct task_struct *last_task; int last_is_kernel; int tracing; - struct op_sample * buffer; + struct op_sample *buffer; unsigned long sample_received; unsigned long sample_lost_overflow; unsigned long backtrace_aborted; @@ -50,7 +50,7 @@ struct oprofile_cpu_buffer { DECLARE_PER_CPU(struct oprofile_cpu_buffer, cpu_buffer); -void cpu_buffer_reset(struct oprofile_cpu_buffer * cpu_buf); +void cpu_buffer_reset(struct oprofile_cpu_buffer *cpu_buf); /* transient events for the CPU buffer -> event buffer */ #define CPU_IS_KERNEL 1 diff --git a/drivers/oprofile/event_buffer.c b/drivers/oprofile/event_buffer.c index 8d692a5c8e73..d962ba0dd87a 100644 --- a/drivers/oprofile/event_buffer.c +++ b/drivers/oprofile/event_buffer.c @@ -19,16 +19,16 @@ #include <linux/dcookies.h> #include <linux/fs.h> #include <asm/uaccess.h> - + #include "oprof.h" #include "event_buffer.h" #include "oprofile_stats.h" DEFINE_MUTEX(buffer_mutex); - + static unsigned long buffer_opened; static DECLARE_WAIT_QUEUE_HEAD(buffer_wait); -static unsigned long * event_buffer; +static unsigned long *event_buffer; static unsigned long buffer_size; static unsigned long buffer_watershed; static size_t buffer_pos; @@ -66,7 +66,7 @@ void wake_up_buffer_waiter(void) mutex_unlock(&buffer_mutex); } - + int alloc_event_buffer(void) { int err = -ENOMEM; @@ -76,13 +76,13 @@ int alloc_event_buffer(void) buffer_size = fs_buffer_size; buffer_watershed = fs_buffer_watershed; spin_unlock_irqrestore(&oprofilefs_lock, flags); - + if (buffer_watershed >= buffer_size) return -EINVAL; - + event_buffer = vmalloc(sizeof(unsigned long) * buffer_size); if (!event_buffer) - goto out; + goto out; err = 0; out: @@ -97,8 +97,8 @@ void free_event_buffer(void) event_buffer = NULL; } - -static int event_buffer_open(struct inode * inode, struct file * file) + +static int event_buffer_open(struct inode *inode, struct file *file) { int err = -EPERM; @@ -116,14 +116,14 @@ static int event_buffer_open(struct inode * inode, struct file * file) file->private_data = dcookie_register(); if (!file->private_data) goto out; - + if ((err = oprofile_setup())) goto fail; /* NB: the actual start happens from userspace * echo 1 >/dev/oprofile/enable */ - + return 0; fail: @@ -134,7 +134,7 @@ out: } -static int event_buffer_release(struct inode * inode, struct file * file) +static int event_buffer_release(struct inode *inode, struct file *file) { oprofile_stop(); oprofile_shutdown(); @@ -146,8 +146,8 @@ static int event_buffer_release(struct inode * inode, struct file * file) } -static ssize_t event_buffer_read(struct file * file, char __user * buf, - size_t count, loff_t * offset) +static ssize_t event_buffer_read(struct file *file, char __user *buf, + size_t count, loff_t *offset) { int retval = -EINVAL; size_t const max = buffer_size * sizeof(unsigned long); @@ -172,18 +172,18 @@ static ssize_t event_buffer_read(struct file * file, char __user * buf, retval = -EFAULT; count = buffer_pos * sizeof(unsigned long); - + if (copy_to_user(buf, event_buffer, count)) goto out; retval = count; buffer_pos = 0; - + out: mutex_unlock(&buffer_mutex); return retval; } - + const struct file_operations event_buffer_fops = { .open = event_buffer_open, .release = event_buffer_release, diff --git a/drivers/oprofile/event_buffer.h b/drivers/oprofile/event_buffer.h index 5076ed1ebd8f..4e70749f8d16 100644 --- a/drivers/oprofile/event_buffer.h +++ b/drivers/oprofile/event_buffer.h @@ -10,13 +10,20 @@ #ifndef EVENT_BUFFER_H #define EVENT_BUFFER_H -#include <linux/types.h> +#include <linux/types.h> #include <asm/mutex.h> - + int alloc_event_buffer(void); void free_event_buffer(void); - + +/** + * Add data to the event buffer. + * The data passed is free-form, but typically consists of + * file offsets, dcookies, context information, and ESCAPE codes. + */ +void add_event_entry(unsigned long data); + /* wake up the process sleeping on the event file */ void wake_up_buffer_waiter(void); @@ -24,10 +31,10 @@ void wake_up_buffer_waiter(void); #define NO_COOKIE 0UL extern const struct file_operations event_buffer_fops; - + /* mutex between sync_cpu_buffers() and the * file reading code. */ extern struct mutex buffer_mutex; - + #endif /* EVENT_BUFFER_H */ diff --git a/drivers/oprofile/oprof.c b/drivers/oprofile/oprof.c index 2c645170f06e..cd375907f26f 100644 --- a/drivers/oprofile/oprof.c +++ b/drivers/oprofile/oprof.c @@ -19,7 +19,7 @@ #include "cpu_buffer.h" #include "buffer_sync.h" #include "oprofile_stats.h" - + struct oprofile_operations oprofile_ops; unsigned long oprofile_started; @@ -36,7 +36,7 @@ static int timer = 0; int oprofile_setup(void) { int err; - + mutex_lock(&start_mutex); if ((err = alloc_cpu_buffers())) @@ -44,10 +44,10 @@ int oprofile_setup(void) if ((err = alloc_event_buffer())) goto out1; - + if (oprofile_ops.setup && (err = oprofile_ops.setup())) goto out2; - + /* Note even though this starts part of the * profiling overhead, it's necessary to prevent * us missing task deaths and eventually oopsing @@ -74,7 +74,7 @@ post_sync: is_setup = 1; mutex_unlock(&start_mutex); return 0; - + out3: if (oprofile_ops.shutdown) oprofile_ops.shutdown(); @@ -92,17 +92,17 @@ out: int oprofile_start(void) { int err = -EINVAL; - + mutex_lock(&start_mutex); - + if (!is_setup) goto out; - err = 0; - + err = 0; + if (oprofile_started) goto out; - + oprofile_reset_stats(); if ((err = oprofile_ops.start())) @@ -114,7 +114,7 @@ out: return err; } - + /* echo 0>/dev/oprofile/enable */ void oprofile_stop(void) { @@ -204,13 +204,13 @@ static void __exit oprofile_exit(void) oprofile_arch_exit(); } - + module_init(oprofile_init); module_exit(oprofile_exit); module_param_named(timer, timer, int, 0644); MODULE_PARM_DESC(timer, "force use of timer interrupt"); - + MODULE_LICENSE("GPL"); MODULE_AUTHOR("John Levon <levon@movementarian.org>"); MODULE_DESCRIPTION("OProfile system profiler"); diff --git a/drivers/oprofile/oprof.h b/drivers/oprofile/oprof.h index 18323650806e..5df0c21a608f 100644 --- a/drivers/oprofile/oprof.h +++ b/drivers/oprofile/oprof.h @@ -11,7 +11,7 @@ #define OPROF_H int oprofile_setup(void); -void oprofile_shutdown(void); +void oprofile_shutdown(void); int oprofilefs_register(void); void oprofilefs_unregister(void); @@ -20,20 +20,20 @@ int oprofile_start(void); void oprofile_stop(void); struct oprofile_operations; - + extern unsigned long fs_buffer_size; extern unsigned long fs_cpu_buffer_size; extern unsigned long fs_buffer_watershed; extern struct oprofile_operations oprofile_ops; extern unsigned long oprofile_started; extern unsigned long backtrace_depth; - + struct super_block; struct dentry; -void oprofile_create_files(struct super_block * sb, struct dentry * root); -void oprofile_timer_init(struct oprofile_operations * ops); +void oprofile_create_files(struct super_block *sb, struct dentry *root); +void oprofile_timer_init(struct oprofile_operations *ops); int oprofile_set_backtrace(unsigned long depth); - + #endif /* OPROF_H */ diff --git a/drivers/oprofile/oprofile_files.c b/drivers/oprofile/oprofile_files.c index ef953ba5ab6b..cc106d503ace 100644 --- a/drivers/oprofile/oprofile_files.c +++ b/drivers/oprofile/oprofile_files.c @@ -13,18 +13,18 @@ #include "event_buffer.h" #include "oprofile_stats.h" #include "oprof.h" - + unsigned long fs_buffer_size = 131072; unsigned long fs_cpu_buffer_size = 8192; unsigned long fs_buffer_watershed = 32768; /* FIXME: tune */ -static ssize_t depth_read(struct file * file, char __user * buf, size_t count, loff_t * offset) +static ssize_t depth_read(struct file *file, char __user *buf, size_t count, loff_t *offset) { return oprofilefs_ulong_to_user(backtrace_depth, buf, count, offset); } -static ssize_t depth_write(struct file * file, char const __user * buf, size_t count, loff_t * offset) +static ssize_t depth_write(struct file *file, char const __user *buf, size_t count, loff_t *offset) { unsigned long val; int retval; @@ -49,8 +49,8 @@ static const struct file_operations depth_fops = { .write = depth_write }; - -static ssize_t pointer_size_read(struct file * file, char __user * buf, size_t count, loff_t * offset) + +static ssize_t pointer_size_read(struct file *file, char __user *buf, size_t count, loff_t *offset) { return oprofilefs_ulong_to_user(sizeof(void *), buf, count, offset); } @@ -61,24 +61,24 @@ static const struct file_operations pointer_size_fops = { }; -static ssize_t cpu_type_read(struct file * file, char __user * buf, size_t count, loff_t * offset) +static ssize_t cpu_type_read(struct file *file, char __user *buf, size_t count, loff_t *offset) { return oprofilefs_str_to_user(oprofile_ops.cpu_type, buf, count, offset); } - - + + static const struct file_operations cpu_type_fops = { .read = cpu_type_read, }; - - -static ssize_t enable_read(struct file * file, char __user * buf, size_t count, loff_t * offset) + + +static ssize_t enable_read(struct file *file, char __user *buf, size_t count, loff_t *offset) { return oprofilefs_ulong_to_user(oprofile_started, buf, count, offset); } -static ssize_t enable_write(struct file * file, char const __user * buf, size_t count, loff_t * offset) +static ssize_t enable_write(struct file *file, char const __user *buf, size_t count, loff_t *offset) { unsigned long val; int retval; @@ -89,7 +89,7 @@ static ssize_t enable_write(struct file * file, char const __user * buf, size_t retval = oprofilefs_ulong_from_user(&val, buf, count); if (retval) return retval; - + if (val) retval = oprofile_start(); else @@ -100,14 +100,14 @@ static ssize_t enable_write(struct file * file, char const __user * buf, size_t return count; } - + static const struct file_operations enable_fops = { .read = enable_read, .write = enable_write, }; -static ssize_t dump_write(struct file * file, char const __user * buf, size_t count, loff_t * offset) +static ssize_t dump_write(struct file *file, char const __user *buf, size_t count, loff_t *offset) { wake_up_buffer_waiter(); return count; @@ -117,8 +117,8 @@ static ssize_t dump_write(struct file * file, char const __user * buf, size_t co static const struct file_operations dump_fops = { .write = dump_write, }; - -void oprofile_create_files(struct super_block * sb, struct dentry * root) + +void oprofile_create_files(struct super_block *sb, struct dentry *root) { oprofilefs_create_file(sb, root, "enable", &enable_fops); oprofilefs_create_file_perm(sb, root, "dump", &dump_fops, 0666); @@ -126,7 +126,7 @@ void oprofile_create_files(struct super_block * sb, struct dentry * root) oprofilefs_create_ulong(sb, root, "buffer_size", &fs_buffer_size); oprofilefs_create_ulong(sb, root, "buffer_watershed", &fs_buffer_watershed); oprofilefs_create_ulong(sb, root, "cpu_buffer_size", &fs_cpu_buffer_size); - oprofilefs_create_file(sb, root, "cpu_type", &cpu_type_fops); + oprofilefs_create_file(sb, root, "cpu_type", &cpu_type_fops); oprofilefs_create_file(sb, root, "backtrace_depth", &depth_fops); oprofilefs_create_file(sb, root, "pointer_size", &pointer_size_fops); oprofile_create_stats_files(sb, root); diff --git a/drivers/oprofile/oprofile_stats.c b/drivers/oprofile/oprofile_stats.c index f99b28e7b79a..e1f6ce03705e 100644 --- a/drivers/oprofile/oprofile_stats.c +++ b/drivers/oprofile/oprofile_stats.c @@ -11,17 +11,17 @@ #include <linux/smp.h> #include <linux/cpumask.h> #include <linux/threads.h> - + #include "oprofile_stats.h" #include "cpu_buffer.h" - + struct oprofile_stat_struct oprofile_stats; - + void oprofile_reset_stats(void) { - struct oprofile_cpu_buffer * cpu_buf; + struct oprofile_cpu_buffer *cpu_buf; int i; - + for_each_possible_cpu(i) { cpu_buf = &per_cpu(cpu_buffer, i); cpu_buf->sample_received = 0; @@ -29,18 +29,18 @@ void oprofile_reset_stats(void) cpu_buf->backtrace_aborted = 0; cpu_buf->sample_invalid_eip = 0; } - + atomic_set(&oprofile_stats.sample_lost_no_mm, 0); atomic_set(&oprofile_stats.sample_lost_no_mapping, 0); atomic_set(&oprofile_stats.event_lost_overflow, 0); } -void oprofile_create_stats_files(struct super_block * sb, struct dentry * root) +void oprofile_create_stats_files(struct super_block *sb, struct dentry *root) { - struct oprofile_cpu_buffer * cpu_buf; - struct dentry * cpudir; - struct dentry * dir; + struct oprofile_cpu_buffer *cpu_buf; + struct dentry *cpudir; + struct dentry *dir; char buf[10]; int i; @@ -52,7 +52,7 @@ void oprofile_create_stats_files(struct super_block * sb, struct dentry * root) cpu_buf = &per_cpu(cpu_buffer, i); snprintf(buf, 10, "cpu%d", i); cpudir = oprofilefs_mkdir(sb, dir, buf); - + /* Strictly speaking access to these ulongs is racy, * but we can't simply lock them, and they are * informational only. @@ -66,7 +66,7 @@ void oprofile_create_stats_files(struct super_block * sb, struct dentry * root) oprofilefs_create_ro_ulong(sb, cpudir, "sample_invalid_eip", &cpu_buf->sample_invalid_eip); } - + oprofilefs_create_ro_atomic(sb, dir, "sample_lost_no_mm", &oprofile_stats.sample_lost_no_mm); oprofilefs_create_ro_atomic(sb, dir, "sample_lost_no_mapping", diff --git a/drivers/oprofile/oprofile_stats.h b/drivers/oprofile/oprofile_stats.h index 6d755a633f15..3da0d08dc1f9 100644 --- a/drivers/oprofile/oprofile_stats.h +++ b/drivers/oprofile/oprofile_stats.h @@ -11,7 +11,7 @@ #define OPROFILE_STATS_H #include <asm/atomic.h> - + struct oprofile_stat_struct { atomic_t sample_lost_no_mm; atomic_t sample_lost_no_mapping; @@ -20,14 +20,14 @@ struct oprofile_stat_struct { }; extern struct oprofile_stat_struct oprofile_stats; - + /* reset all stats to zero */ void oprofile_reset_stats(void); - + struct super_block; struct dentry; - + /* create the stats/ dir */ -void oprofile_create_stats_files(struct super_block * sb, struct dentry * root); +void oprofile_create_stats_files(struct super_block *sb, struct dentry *root); #endif /* OPROFILE_STATS_H */ diff --git a/drivers/oprofile/oprofilefs.c b/drivers/oprofile/oprofilefs.c index 8543cb26cf34..ddc4c59f02dc 100644 --- a/drivers/oprofile/oprofilefs.c +++ b/drivers/oprofile/oprofilefs.c @@ -23,9 +23,9 @@ DEFINE_SPINLOCK(oprofilefs_lock); -static struct inode * oprofilefs_get_inode(struct super_block * sb, int mode) +static struct inode *oprofilefs_get_inode(struct super_block *sb, int mode) { - struct inode * inode = new_inode(sb); + struct inode *inode = new_inode(sb); if (inode) { inode->i_mode = mode; @@ -44,7 +44,7 @@ static struct super_operations s_ops = { }; -ssize_t oprofilefs_str_to_user(char const * str, char __user * buf, size_t count, loff_t * offset) +ssize_t oprofilefs_str_to_user(char const *str, char __user *buf, size_t count, loff_t *offset) { return simple_read_from_buffer(buf, count, offset, str, strlen(str)); } @@ -52,7 +52,7 @@ ssize_t oprofilefs_str_to_user(char const * str, char __user * buf, size_t count #define TMPBUFSIZE 50 -ssize_t oprofilefs_ulong_to_user(unsigned long val, char __user * buf, size_t count, loff_t * offset) +ssize_t oprofilefs_ulong_to_user(unsigned long val, char __user *buf, size_t count, loff_t *offset) { char tmpbuf[TMPBUFSIZE]; size_t maxlen = snprintf(tmpbuf, TMPBUFSIZE, "%lu\n", val); @@ -62,7 +62,7 @@ ssize_t oprofilefs_ulong_to_user(unsigned long val, char __user * buf, size_t co } -int oprofilefs_ulong_from_user(unsigned long * val, char const __user * buf, size_t count) +int oprofilefs_ulong_from_user(unsigned long *val, char const __user *buf, size_t count) { char tmpbuf[TMPBUFSIZE]; unsigned long flags; @@ -85,16 +85,16 @@ int oprofilefs_ulong_from_user(unsigned long * val, char const __user * buf, siz } -static ssize_t ulong_read_file(struct file * file, char __user * buf, size_t count, loff_t * offset) +static ssize_t ulong_read_file(struct file *file, char __user *buf, size_t count, loff_t *offset) { - unsigned long * val = file->private_data; + unsigned long *val = file->private_data; return oprofilefs_ulong_to_user(*val, buf, count, offset); } -static ssize_t ulong_write_file(struct file * file, char const __user * buf, size_t count, loff_t * offset) +static ssize_t ulong_write_file(struct file *file, char const __user *buf, size_t count, loff_t *offset) { - unsigned long * value = file->private_data; + unsigned long *value = file->private_data; int retval; if (*offset) @@ -108,7 +108,7 @@ static ssize_t ulong_write_file(struct file * file, char const __user * buf, siz } -static int default_open(struct inode * inode, struct file * filp) +static int default_open(struct inode *inode, struct file *filp) { if (inode->i_private) filp->private_data = inode->i_private; @@ -129,12 +129,12 @@ static const struct file_operations ulong_ro_fops = { }; -static struct dentry * __oprofilefs_create_file(struct super_block * sb, - struct dentry * root, char const * name, const struct file_operations * fops, +static struct dentry *__oprofilefs_create_file(struct super_block *sb, + struct dentry *root, char const *name, const struct file_operations *fops, int perm) { - struct dentry * dentry; - struct inode * inode; + struct dentry *dentry; + struct inode *inode; dentry = d_alloc_name(root, name); if (!dentry) @@ -150,10 +150,10 @@ static struct dentry * __oprofilefs_create_file(struct super_block * sb, } -int oprofilefs_create_ulong(struct super_block * sb, struct dentry * root, - char const * name, unsigned long * val) +int oprofilefs_create_ulong(struct super_block *sb, struct dentry *root, + char const *name, unsigned long *val) { - struct dentry * d = __oprofilefs_create_file(sb, root, name, + struct dentry *d = __oprofilefs_create_file(sb, root, name, &ulong_fops, 0644); if (!d) return -EFAULT; @@ -163,10 +163,10 @@ int oprofilefs_create_ulong(struct super_block * sb, struct dentry * root, } -int oprofilefs_create_ro_ulong(struct super_block * sb, struct dentry * root, - char const * name, unsigned long * val) +int oprofilefs_create_ro_ulong(struct super_block *sb, struct dentry *root, + char const *name, unsigned long *val) { - struct dentry * d = __oprofilefs_create_file(sb, root, name, + struct dentry *d = __oprofilefs_create_file(sb, root, name, &ulong_ro_fops, 0444); if (!d) return -EFAULT; @@ -176,23 +176,23 @@ int oprofilefs_create_ro_ulong(struct super_block * sb, struct dentry * root, } -static ssize_t atomic_read_file(struct file * file, char __user * buf, size_t count, loff_t * offset) +static ssize_t atomic_read_file(struct file *file, char __user *buf, size_t count, loff_t *offset) { - atomic_t * val = file->private_data; + atomic_t *val = file->private_data; return oprofilefs_ulong_to_user(atomic_read(val), buf, count, offset); } - + static const struct file_operations atomic_ro_fops = { .read = atomic_read_file, .open = default_open, }; - -int oprofilefs_create_ro_atomic(struct super_block * sb, struct dentry * root, - char const * name, atomic_t * val) + +int oprofilefs_create_ro_atomic(struct super_block *sb, struct dentry *root, + char const *name, atomic_t *val) { - struct dentry * d = __oprofilefs_create_file(sb, root, name, + struct dentry *d = __oprofilefs_create_file(sb, root, name, &atomic_ro_fops, 0444); if (!d) return -EFAULT; @@ -201,9 +201,9 @@ int oprofilefs_create_ro_atomic(struct super_block * sb, struct dentry * root, return 0; } - -int oprofilefs_create_file(struct super_block * sb, struct dentry * root, - char const * name, const struct file_operations * fops) + +int oprofilefs_create_file(struct super_block *sb, struct dentry *root, + char const *name, const struct file_operations *fops) { if (!__oprofilefs_create_file(sb, root, name, fops, 0644)) return -EFAULT; @@ -211,8 +211,8 @@ int oprofilefs_create_file(struct super_block * sb, struct dentry * root, } -int oprofilefs_create_file_perm(struct super_block * sb, struct dentry * root, - char const * name, const struct file_operations * fops, int perm) +int oprofilefs_create_file_perm(struct super_block *sb, struct dentry *root, + char const *name, const struct file_operations *fops, int perm) { if (!__oprofilefs_create_file(sb, root, name, fops, perm)) return -EFAULT; @@ -220,11 +220,11 @@ int oprofilefs_create_file_perm(struct super_block * sb, struct dentry * root, } -struct dentry * oprofilefs_mkdir(struct super_block * sb, - struct dentry * root, char const * name) +struct dentry *oprofilefs_mkdir(struct super_block *sb, + struct dentry *root, char const *name) { - struct dentry * dentry; - struct inode * inode; + struct dentry *dentry; + struct inode *inode; dentry = d_alloc_name(root, name); if (!dentry) @@ -241,10 +241,10 @@ struct dentry * oprofilefs_mkdir(struct super_block * sb, } -static int oprofilefs_fill_super(struct super_block * sb, void * data, int silent) +static int oprofilefs_fill_super(struct super_block *sb, void *data, int silent) { - struct inode * root_inode; - struct dentry * root_dentry; + struct inode *root_inode; + struct dentry *root_dentry; sb->s_blocksize = PAGE_CACHE_SIZE; sb->s_blocksize_bits = PAGE_CACHE_SHIFT; diff --git a/drivers/oprofile/timer_int.c b/drivers/oprofile/timer_int.c index 710a45f0d734..333f915568c7 100644 --- a/drivers/oprofile/timer_int.c +++ b/drivers/oprofile/timer_int.c @@ -19,7 +19,7 @@ static int timer_notify(struct pt_regs *regs) { - oprofile_add_sample(regs, 0); + oprofile_add_sample(regs, 0); return 0; } @@ -35,7 +35,7 @@ static void timer_stop(void) } -void __init oprofile_timer_init(struct oprofile_operations * ops) +void __init oprofile_timer_init(struct oprofile_operations *ops) { ops->create_files = NULL; ops->setup = NULL; diff --git a/drivers/parport/parport_pc.c b/drivers/parport/parport_pc.c index 8a846adf1dcf..96f3bdf0ec4b 100644 --- a/drivers/parport/parport_pc.c +++ b/drivers/parport/parport_pc.c @@ -2791,6 +2791,7 @@ enum parport_pc_pci_cards { oxsemi_952, oxsemi_954, oxsemi_840, + oxsemi_pcie_pport, aks_0100, mobility_pp, netmos_9705, @@ -2868,6 +2869,7 @@ static struct parport_pc_pci { /* oxsemi_952 */ { 1, { { 0, 1 }, } }, /* oxsemi_954 */ { 1, { { 0, -1 }, } }, /* oxsemi_840 */ { 1, { { 0, 1 }, } }, + /* oxsemi_pcie_pport */ { 1, { { 0, 1 }, } }, /* aks_0100 */ { 1, { { 0, -1 }, } }, /* mobility_pp */ { 1, { { 0, 1 }, } }, /* netmos_9705 */ { 1, { { 0, -1 }, } }, /* untested */ @@ -2928,7 +2930,6 @@ static const struct pci_device_id parport_pc_pci_tbl[] = { { 0x1409, 0x7268, 0x1409, 0x0103, 0, 0, timedia_4008a }, { 0x1409, 0x7268, 0x1409, 0x0104, 0, 0, timedia_4018 }, { 0x1409, 0x7268, 0x1409, 0x9018, 0, 0, timedia_9018a }, - { 0x14f2, 0x0121, PCI_ANY_ID, PCI_ANY_ID, 0, 0, mobility_pp }, { PCI_VENDOR_ID_SYBA, PCI_DEVICE_ID_SYBA_2P_EPP, PCI_ANY_ID, PCI_ANY_ID, 0, 0, syba_2p_epp }, { PCI_VENDOR_ID_SYBA, PCI_DEVICE_ID_SYBA_1P_ECP, @@ -2946,8 +2947,25 @@ static const struct pci_device_id parport_pc_pci_tbl[] = { PCI_ANY_ID, PCI_ANY_ID, 0, 0, oxsemi_954 }, { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_12PCI840, PCI_ANY_ID, PCI_ANY_ID, 0, 0, oxsemi_840 }, + { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_PCIe840, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, oxsemi_pcie_pport }, + { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_PCIe840_G, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, oxsemi_pcie_pport }, + { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_PCIe952_0, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, oxsemi_pcie_pport }, + { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_PCIe952_0_G, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, oxsemi_pcie_pport }, + { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_PCIe952_1, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, oxsemi_pcie_pport }, + { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_PCIe952_1_G, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, oxsemi_pcie_pport }, + { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_PCIe952_1_U, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, oxsemi_pcie_pport }, + { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_PCIe952_1_GU, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, oxsemi_pcie_pport }, { PCI_VENDOR_ID_AKS, PCI_DEVICE_ID_AKS_ALADDINCARD, PCI_ANY_ID, PCI_ANY_ID, 0, 0, aks_0100 }, + { 0x14f2, 0x0121, PCI_ANY_ID, PCI_ANY_ID, 0, 0, mobility_pp }, /* NetMos communication controllers */ { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9705, PCI_ANY_ID, PCI_ANY_ID, 0, 0, netmos_9705 }, diff --git a/drivers/pci/dmar.c b/drivers/pci/dmar.c index 8b29c307f1a1..691b3adeb870 100644 --- a/drivers/pci/dmar.c +++ b/drivers/pci/dmar.c @@ -188,8 +188,7 @@ dmar_parse_one_drhd(struct acpi_dmar_header *header) return 0; } -static int __init -dmar_parse_dev(struct dmar_drhd_unit *dmaru) +static int __init dmar_parse_dev(struct dmar_drhd_unit *dmaru) { struct acpi_dmar_hardware_unit *drhd; static int include_all; @@ -277,14 +276,15 @@ dmar_table_print_dmar_entry(struct acpi_dmar_header *header) drhd = (struct acpi_dmar_hardware_unit *)header; printk (KERN_INFO PREFIX "DRHD (flags: 0x%08x)base: 0x%016Lx\n", - drhd->flags, drhd->address); + drhd->flags, (unsigned long long)drhd->address); break; case ACPI_DMAR_TYPE_RESERVED_MEMORY: rmrr = (struct acpi_dmar_reserved_memory *)header; printk (KERN_INFO PREFIX "RMRR base: 0x%016Lx end: 0x%016Lx\n", - rmrr->base_address, rmrr->end_address); + (unsigned long long)rmrr->base_address, + (unsigned long long)rmrr->end_address); break; } } @@ -328,7 +328,7 @@ parse_dmar_table(void) if (!dmar) return -ENODEV; - if (dmar->width < PAGE_SHIFT_4K - 1) { + if (dmar->width < PAGE_SHIFT - 1) { printk(KERN_WARNING PREFIX "Invalid DMAR haw\n"); return -EINVAL; } @@ -460,8 +460,8 @@ void __init detect_intel_iommu(void) ret = dmar_table_detect(); -#ifdef CONFIG_DMAR { +#ifdef CONFIG_INTR_REMAP struct acpi_table_dmar *dmar; /* * for now we will disable dma-remapping when interrupt @@ -470,29 +470,17 @@ void __init detect_intel_iommu(void) * is added, we will not need this any more. */ dmar = (struct acpi_table_dmar *) dmar_tbl; - if (ret && cpu_has_x2apic && dmar->flags & 0x1) { + if (ret && cpu_has_x2apic && dmar->flags & 0x1) printk(KERN_INFO "Queued invalidation will be enabled to support " "x2apic and Intr-remapping.\n"); - printk(KERN_INFO - "Disabling IOMMU detection, because of missing " - "queued invalidation support for IOTLB " - "invalidation\n"); - printk(KERN_INFO - "Use \"nox2apic\", if you want to use Intel " - " IOMMU for DMA-remapping and don't care about " - " x2apic support\n"); - - dmar_disabled = 1; - goto end; - } - +#endif +#ifdef CONFIG_DMAR if (ret && !no_iommu && !iommu_detected && !swiotlb && !dmar_disabled) iommu_detected = 1; - } -end: #endif + } dmar_tbl = NULL; } @@ -510,7 +498,7 @@ int alloc_iommu(struct dmar_drhd_unit *drhd) iommu->seq_id = iommu_allocated++; - iommu->reg = ioremap(drhd->reg_base_addr, PAGE_SIZE_4K); + iommu->reg = ioremap(drhd->reg_base_addr, VTD_PAGE_SIZE); if (!iommu->reg) { printk(KERN_ERR "IOMMU: can't map the region\n"); goto error; @@ -521,8 +509,8 @@ int alloc_iommu(struct dmar_drhd_unit *drhd) /* the registers might be more than one page */ map_size = max_t(int, ecap_max_iotlb_offset(iommu->ecap), cap_max_fault_reg_offset(iommu->cap)); - map_size = PAGE_ALIGN_4K(map_size); - if (map_size > PAGE_SIZE_4K) { + map_size = VTD_PAGE_ALIGN(map_size); + if (map_size > VTD_PAGE_SIZE) { iounmap(iommu->reg); iommu->reg = ioremap(drhd->reg_base_addr, map_size); if (!iommu->reg) { @@ -533,8 +521,10 @@ int alloc_iommu(struct dmar_drhd_unit *drhd) ver = readl(iommu->reg + DMAR_VER_REG); pr_debug("IOMMU %llx: ver %d:%d cap %llx ecap %llx\n", - drhd->reg_base_addr, DMAR_VER_MAJOR(ver), DMAR_VER_MINOR(ver), - iommu->cap, iommu->ecap); + (unsigned long long)drhd->reg_base_addr, + DMAR_VER_MAJOR(ver), DMAR_VER_MINOR(ver), + (unsigned long long)iommu->cap, + (unsigned long long)iommu->ecap); spin_lock_init(&iommu->register_lock); @@ -587,11 +577,11 @@ void qi_submit_sync(struct qi_desc *desc, struct intel_iommu *iommu) hw = qi->desc; - spin_lock(&qi->q_lock); + spin_lock_irqsave(&qi->q_lock, flags); while (qi->free_cnt < 3) { - spin_unlock(&qi->q_lock); + spin_unlock_irqrestore(&qi->q_lock, flags); cpu_relax(); - spin_lock(&qi->q_lock); + spin_lock_irqsave(&qi->q_lock, flags); } index = qi->free_head; @@ -612,15 +602,22 @@ void qi_submit_sync(struct qi_desc *desc, struct intel_iommu *iommu) qi->free_head = (qi->free_head + 2) % QI_LENGTH; qi->free_cnt -= 2; - spin_lock_irqsave(&iommu->register_lock, flags); + spin_lock(&iommu->register_lock); /* * update the HW tail register indicating the presence of * new descriptors. */ writel(qi->free_head << 4, iommu->reg + DMAR_IQT_REG); - spin_unlock_irqrestore(&iommu->register_lock, flags); + spin_unlock(&iommu->register_lock); while (qi->desc_status[wait_index] != QI_DONE) { + /* + * We will leave the interrupts disabled, to prevent interrupt + * context to queue another cmd while a cmd is already submitted + * and waiting for completion on this cpu. This is to avoid + * a deadlock where the interrupt context can wait indefinitely + * for free slots in the queue. + */ spin_unlock(&qi->q_lock); cpu_relax(); spin_lock(&qi->q_lock); @@ -629,7 +626,7 @@ void qi_submit_sync(struct qi_desc *desc, struct intel_iommu *iommu) qi->desc_status[index] = QI_DONE; reclaim_free_desc(qi); - spin_unlock(&qi->q_lock); + spin_unlock_irqrestore(&qi->q_lock, flags); } /* @@ -645,6 +642,62 @@ void qi_global_iec(struct intel_iommu *iommu) qi_submit_sync(&desc, iommu); } +int qi_flush_context(struct intel_iommu *iommu, u16 did, u16 sid, u8 fm, + u64 type, int non_present_entry_flush) +{ + + struct qi_desc desc; + + if (non_present_entry_flush) { + if (!cap_caching_mode(iommu->cap)) + return 1; + else + did = 0; + } + + desc.low = QI_CC_FM(fm) | QI_CC_SID(sid) | QI_CC_DID(did) + | QI_CC_GRAN(type) | QI_CC_TYPE; + desc.high = 0; + + qi_submit_sync(&desc, iommu); + + return 0; + +} + +int qi_flush_iotlb(struct intel_iommu *iommu, u16 did, u64 addr, + unsigned int size_order, u64 type, + int non_present_entry_flush) +{ + u8 dw = 0, dr = 0; + + struct qi_desc desc; + int ih = 0; + + if (non_present_entry_flush) { + if (!cap_caching_mode(iommu->cap)) + return 1; + else + did = 0; + } + + if (cap_write_drain(iommu->cap)) + dw = 1; + + if (cap_read_drain(iommu->cap)) + dr = 1; + + desc.low = QI_IOTLB_DID(did) | QI_IOTLB_DR(dr) | QI_IOTLB_DW(dw) + | QI_IOTLB_GRAN(type) | QI_IOTLB_TYPE; + desc.high = QI_IOTLB_ADDR(addr) | QI_IOTLB_IH(ih) + | QI_IOTLB_AM(size_order); + + qi_submit_sync(&desc, iommu); + + return 0; + +} + /* * Enable Queued Invalidation interface. This is a must to support * interrupt-remapping. Also used by DMA-remapping, which replaces diff --git a/drivers/pci/hotplug/acpiphp.h b/drivers/pci/hotplug/acpiphp.h index 5a58b075dd8d..f9e244da30ae 100644 --- a/drivers/pci/hotplug/acpiphp.h +++ b/drivers/pci/hotplug/acpiphp.h @@ -50,9 +50,6 @@ #define info(format, arg...) printk(KERN_INFO "%s: " format, MY_NAME , ## arg) #define warn(format, arg...) printk(KERN_WARNING "%s: " format, MY_NAME , ## arg) -/* name size which is used for entries in pcihpfs */ -#define SLOT_NAME_SIZE 20 /* {_SUN} */ - struct acpiphp_bridge; struct acpiphp_slot; @@ -63,9 +60,13 @@ struct slot { struct hotplug_slot *hotplug_slot; struct acpiphp_slot *acpi_slot; struct hotplug_slot_info info; - char name[SLOT_NAME_SIZE]; }; +static inline const char *slot_name(struct slot *slot) +{ + return hotplug_slot_name(slot->hotplug_slot); +} + /* * struct acpiphp_bridge - PCI bridge information * diff --git a/drivers/pci/hotplug/acpiphp_core.c b/drivers/pci/hotplug/acpiphp_core.c index 0e496e866a84..95b536a23d25 100644 --- a/drivers/pci/hotplug/acpiphp_core.c +++ b/drivers/pci/hotplug/acpiphp_core.c @@ -44,6 +44,9 @@ #define MY_NAME "acpiphp" +/* name size which is used for entries in pcihpfs */ +#define SLOT_NAME_SIZE 21 /* {_SUN} */ + static int debug; int acpiphp_debug; @@ -84,7 +87,6 @@ static struct hotplug_slot_ops acpi_hotplug_slot_ops = { .get_adapter_status = get_adapter_status, }; - /** * acpiphp_register_attention - set attention LED callback * @info: must be completely filled with LED callbacks @@ -136,7 +138,7 @@ static int enable_slot(struct hotplug_slot *hotplug_slot) { struct slot *slot = hotplug_slot->private; - dbg("%s - physical_slot = %s\n", __func__, hotplug_slot->name); + dbg("%s - physical_slot = %s\n", __func__, slot_name(slot)); /* enable the specified slot */ return acpiphp_enable_slot(slot->acpi_slot); @@ -154,7 +156,7 @@ static int disable_slot(struct hotplug_slot *hotplug_slot) struct slot *slot = hotplug_slot->private; int retval; - dbg("%s - physical_slot = %s\n", __func__, hotplug_slot->name); + dbg("%s - physical_slot = %s\n", __func__, slot_name(slot)); /* disable the specified slot */ retval = acpiphp_disable_slot(slot->acpi_slot); @@ -177,7 +179,7 @@ static int disable_slot(struct hotplug_slot *hotplug_slot) { int retval = -ENODEV; - dbg("%s - physical_slot = %s\n", __func__, hotplug_slot->name); + dbg("%s - physical_slot = %s\n", __func__, hotplug_slot_name(hotplug_slot)); if (attention_info && try_module_get(attention_info->owner)) { retval = attention_info->set_attn(hotplug_slot, status); @@ -200,7 +202,7 @@ static int get_power_status(struct hotplug_slot *hotplug_slot, u8 *value) { struct slot *slot = hotplug_slot->private; - dbg("%s - physical_slot = %s\n", __func__, hotplug_slot->name); + dbg("%s - physical_slot = %s\n", __func__, slot_name(slot)); *value = acpiphp_get_power_status(slot->acpi_slot); @@ -222,7 +224,7 @@ static int get_attention_status(struct hotplug_slot *hotplug_slot, u8 *value) { int retval = -EINVAL; - dbg("%s - physical_slot = %s\n", __func__, hotplug_slot->name); + dbg("%s - physical_slot = %s\n", __func__, hotplug_slot_name(hotplug_slot)); if (attention_info && try_module_get(attention_info->owner)) { retval = attention_info->get_attn(hotplug_slot, value); @@ -245,7 +247,7 @@ static int get_latch_status(struct hotplug_slot *hotplug_slot, u8 *value) { struct slot *slot = hotplug_slot->private; - dbg("%s - physical_slot = %s\n", __func__, hotplug_slot->name); + dbg("%s - physical_slot = %s\n", __func__, slot_name(slot)); *value = acpiphp_get_latch_status(slot->acpi_slot); @@ -265,7 +267,7 @@ static int get_adapter_status(struct hotplug_slot *hotplug_slot, u8 *value) { struct slot *slot = hotplug_slot->private; - dbg("%s - physical_slot = %s\n", __func__, hotplug_slot->name); + dbg("%s - physical_slot = %s\n", __func__, slot_name(slot)); *value = acpiphp_get_adapter_status(slot->acpi_slot); @@ -299,7 +301,7 @@ static void release_slot(struct hotplug_slot *hotplug_slot) { struct slot *slot = hotplug_slot->private; - dbg("%s - physical_slot = %s\n", __func__, hotplug_slot->name); + dbg("%s - physical_slot = %s\n", __func__, slot_name(slot)); kfree(slot->hotplug_slot); kfree(slot); @@ -310,6 +312,7 @@ int acpiphp_register_hotplug_slot(struct acpiphp_slot *acpiphp_slot) { struct slot *slot; int retval = -ENOMEM; + char name[SLOT_NAME_SIZE]; slot = kzalloc(sizeof(*slot), GFP_KERNEL); if (!slot) @@ -321,8 +324,6 @@ int acpiphp_register_hotplug_slot(struct acpiphp_slot *acpiphp_slot) slot->hotplug_slot->info = &slot->info; - slot->hotplug_slot->name = slot->name; - slot->hotplug_slot->private = slot; slot->hotplug_slot->release = &release_slot; slot->hotplug_slot->ops = &acpi_hotplug_slot_ops; @@ -336,11 +337,12 @@ int acpiphp_register_hotplug_slot(struct acpiphp_slot *acpiphp_slot) slot->hotplug_slot->info->cur_bus_speed = PCI_SPEED_UNKNOWN; acpiphp_slot->slot = slot; - snprintf(slot->name, sizeof(slot->name), "%u", slot->acpi_slot->sun); + snprintf(name, SLOT_NAME_SIZE, "%u", slot->acpi_slot->sun); retval = pci_hp_register(slot->hotplug_slot, acpiphp_slot->bridge->pci_bus, - acpiphp_slot->device); + acpiphp_slot->device, + name); if (retval == -EBUSY) goto error_hpslot; if (retval) { @@ -348,7 +350,7 @@ int acpiphp_register_hotplug_slot(struct acpiphp_slot *acpiphp_slot) goto error_hpslot; } - info("Slot [%s] registered\n", slot->hotplug_slot->name); + info("Slot [%s] registered\n", slot_name(slot)); return 0; error_hpslot: @@ -365,7 +367,7 @@ void acpiphp_unregister_hotplug_slot(struct acpiphp_slot *acpiphp_slot) struct slot *slot = acpiphp_slot->slot; int retval = 0; - info ("Slot [%s] unregistered\n", slot->hotplug_slot->name); + info("Slot [%s] unregistered\n", slot_name(slot)); retval = pci_hp_deregister(slot->hotplug_slot); if (retval) diff --git a/drivers/pci/hotplug/cpci_hotplug.h b/drivers/pci/hotplug/cpci_hotplug.h index d9769b30be9a..9fff878cf026 100644 --- a/drivers/pci/hotplug/cpci_hotplug.h +++ b/drivers/pci/hotplug/cpci_hotplug.h @@ -30,6 +30,7 @@ #include <linux/types.h> #include <linux/pci.h> +#include <linux/pci_hotplug.h> /* PICMG 2.1 R2.0 HS CSR bits: */ #define HS_CSR_INS 0x0080 @@ -69,6 +70,11 @@ struct cpci_hp_controller { struct cpci_hp_controller_ops *ops; }; +static inline const char *slot_name(struct slot *slot) +{ + return hotplug_slot_name(slot->hotplug_slot); +} + extern int cpci_hp_register_controller(struct cpci_hp_controller *controller); extern int cpci_hp_unregister_controller(struct cpci_hp_controller *controller); extern int cpci_hp_register_bus(struct pci_bus *bus, u8 first, u8 last); diff --git a/drivers/pci/hotplug/cpci_hotplug_core.c b/drivers/pci/hotplug/cpci_hotplug_core.c index 935947991dc9..de94f4feef8c 100644 --- a/drivers/pci/hotplug/cpci_hotplug_core.c +++ b/drivers/pci/hotplug/cpci_hotplug_core.c @@ -108,7 +108,7 @@ enable_slot(struct hotplug_slot *hotplug_slot) struct slot *slot = hotplug_slot->private; int retval = 0; - dbg("%s - physical_slot = %s", __func__, hotplug_slot->name); + dbg("%s - physical_slot = %s", __func__, slot_name(slot)); if (controller->ops->set_power) retval = controller->ops->set_power(slot, 1); @@ -121,25 +121,23 @@ disable_slot(struct hotplug_slot *hotplug_slot) struct slot *slot = hotplug_slot->private; int retval = 0; - dbg("%s - physical_slot = %s", __func__, hotplug_slot->name); + dbg("%s - physical_slot = %s", __func__, slot_name(slot)); down_write(&list_rwsem); /* Unconfigure device */ - dbg("%s - unconfiguring slot %s", - __func__, slot->hotplug_slot->name); + dbg("%s - unconfiguring slot %s", __func__, slot_name(slot)); if ((retval = cpci_unconfigure_slot(slot))) { err("%s - could not unconfigure slot %s", - __func__, slot->hotplug_slot->name); + __func__, slot_name(slot)); goto disable_error; } - dbg("%s - finished unconfiguring slot %s", - __func__, slot->hotplug_slot->name); + dbg("%s - finished unconfiguring slot %s", __func__, slot_name(slot)); /* Clear EXT (by setting it) */ if (cpci_clear_ext(slot)) { err("%s - could not clear EXT for slot %s", - __func__, slot->hotplug_slot->name); + __func__, slot_name(slot)); retval = -ENODEV; goto disable_error; } @@ -214,7 +212,6 @@ static void release_slot(struct hotplug_slot *hotplug_slot) struct slot *slot = hotplug_slot->private; kfree(slot->hotplug_slot->info); - kfree(slot->hotplug_slot->name); kfree(slot->hotplug_slot); if (slot->dev) pci_dev_put(slot->dev); @@ -222,12 +219,6 @@ static void release_slot(struct hotplug_slot *hotplug_slot) } #define SLOT_NAME_SIZE 6 -static void -make_slot_name(struct slot *slot) -{ - snprintf(slot->hotplug_slot->name, - SLOT_NAME_SIZE, "%02x:%02x", slot->bus->number, slot->number); -} int cpci_hp_register_bus(struct pci_bus *bus, u8 first, u8 last) @@ -235,7 +226,7 @@ cpci_hp_register_bus(struct pci_bus *bus, u8 first, u8 last) struct slot *slot; struct hotplug_slot *hotplug_slot; struct hotplug_slot_info *info; - char *name; + char name[SLOT_NAME_SIZE]; int status = -ENOMEM; int i; @@ -262,34 +253,31 @@ cpci_hp_register_bus(struct pci_bus *bus, u8 first, u8 last) goto error_hpslot; hotplug_slot->info = info; - name = kmalloc(SLOT_NAME_SIZE, GFP_KERNEL); - if (!name) - goto error_info; - hotplug_slot->name = name; - slot->bus = bus; slot->number = i; slot->devfn = PCI_DEVFN(i, 0); + snprintf(name, SLOT_NAME_SIZE, "%02x:%02x", bus->number, i); + hotplug_slot->private = slot; hotplug_slot->release = &release_slot; - make_slot_name(slot); hotplug_slot->ops = &cpci_hotplug_slot_ops; /* * Initialize the slot info structure with some known * good values. */ - dbg("initializing slot %s", slot->hotplug_slot->name); + dbg("initializing slot %s", name); info->power_status = cpci_get_power_status(slot); info->attention_status = cpci_get_attention_status(slot); - dbg("registering slot %s", slot->hotplug_slot->name); - status = pci_hp_register(slot->hotplug_slot, bus, i); + dbg("registering slot %s", name); + status = pci_hp_register(slot->hotplug_slot, bus, i, name); if (status) { err("pci_hp_register failed with error %d", status); - goto error_name; + goto error_info; } + dbg("slot registered with name: %s", slot_name(slot)); /* Add slot to our internal list */ down_write(&list_rwsem); @@ -298,8 +286,6 @@ cpci_hp_register_bus(struct pci_bus *bus, u8 first, u8 last) up_write(&list_rwsem); } return 0; -error_name: - kfree(name); error_info: kfree(info); error_hpslot: @@ -327,7 +313,7 @@ cpci_hp_unregister_bus(struct pci_bus *bus) list_del(&slot->slot_list); slots--; - dbg("deregistering slot %s", slot->hotplug_slot->name); + dbg("deregistering slot %s", slot_name(slot)); status = pci_hp_deregister(slot->hotplug_slot); if (status) { err("pci_hp_deregister failed with error %d", @@ -379,11 +365,10 @@ init_slots(int clear_ins) return -1; } list_for_each_entry(slot, &slot_list, slot_list) { - dbg("%s - looking at slot %s", - __func__, slot->hotplug_slot->name); + dbg("%s - looking at slot %s", __func__, slot_name(slot)); if (clear_ins && cpci_check_and_clear_ins(slot)) dbg("%s - cleared INS for slot %s", - __func__, slot->hotplug_slot->name); + __func__, slot_name(slot)); dev = pci_get_slot(slot->bus, PCI_DEVFN(slot->number, 0)); if (dev) { if (update_adapter_status(slot->hotplug_slot, 1)) @@ -414,8 +399,7 @@ check_slots(void) } extracted = inserted = 0; list_for_each_entry(slot, &slot_list, slot_list) { - dbg("%s - looking at slot %s", - __func__, slot->hotplug_slot->name); + dbg("%s - looking at slot %s", __func__, slot_name(slot)); if (cpci_check_and_clear_ins(slot)) { /* * Some broken hardware (e.g. PLX 9054AB) asserts @@ -423,35 +407,34 @@ check_slots(void) */ if (slot->dev) { warn("slot %s already inserted", - slot->hotplug_slot->name); + slot_name(slot)); inserted++; continue; } /* Process insertion */ - dbg("%s - slot %s inserted", - __func__, slot->hotplug_slot->name); + dbg("%s - slot %s inserted", __func__, slot_name(slot)); /* GSM, debug */ hs_csr = cpci_get_hs_csr(slot); dbg("%s - slot %s HS_CSR (1) = %04x", - __func__, slot->hotplug_slot->name, hs_csr); + __func__, slot_name(slot), hs_csr); /* Configure device */ dbg("%s - configuring slot %s", - __func__, slot->hotplug_slot->name); + __func__, slot_name(slot)); if (cpci_configure_slot(slot)) { err("%s - could not configure slot %s", - __func__, slot->hotplug_slot->name); + __func__, slot_name(slot)); continue; } dbg("%s - finished configuring slot %s", - __func__, slot->hotplug_slot->name); + __func__, slot_name(slot)); /* GSM, debug */ hs_csr = cpci_get_hs_csr(slot); dbg("%s - slot %s HS_CSR (2) = %04x", - __func__, slot->hotplug_slot->name, hs_csr); + __func__, slot_name(slot), hs_csr); if (update_latch_status(slot->hotplug_slot, 1)) warn("failure to update latch file"); @@ -464,18 +447,18 @@ check_slots(void) /* GSM, debug */ hs_csr = cpci_get_hs_csr(slot); dbg("%s - slot %s HS_CSR (3) = %04x", - __func__, slot->hotplug_slot->name, hs_csr); + __func__, slot_name(slot), hs_csr); inserted++; } else if (cpci_check_ext(slot)) { /* Process extraction request */ dbg("%s - slot %s extracted", - __func__, slot->hotplug_slot->name); + __func__, slot_name(slot)); /* GSM, debug */ hs_csr = cpci_get_hs_csr(slot); dbg("%s - slot %s HS_CSR = %04x", - __func__, slot->hotplug_slot->name, hs_csr); + __func__, slot_name(slot), hs_csr); if (!slot->extracting) { if (update_latch_status(slot->hotplug_slot, 0)) { @@ -493,7 +476,7 @@ check_slots(void) * bother trying to tell the driver or not? */ err("card in slot %s was improperly removed", - slot->hotplug_slot->name); + slot_name(slot)); if (update_adapter_status(slot->hotplug_slot, 0)) warn("failure to update adapter file"); slot->extracting = 0; diff --git a/drivers/pci/hotplug/cpci_hotplug_pci.c b/drivers/pci/hotplug/cpci_hotplug_pci.c index df82b95e2874..829c327cfb5e 100644 --- a/drivers/pci/hotplug/cpci_hotplug_pci.c +++ b/drivers/pci/hotplug/cpci_hotplug_pci.c @@ -209,7 +209,7 @@ int cpci_led_on(struct slot* slot) hs_cap + 2, hs_csr)) { err("Could not set LOO for slot %s", - slot->hotplug_slot->name); + hotplug_slot_name(slot->hotplug_slot)); return -ENODEV; } } @@ -238,7 +238,7 @@ int cpci_led_off(struct slot* slot) hs_cap + 2, hs_csr)) { err("Could not clear LOO for slot %s", - slot->hotplug_slot->name); + hotplug_slot_name(slot->hotplug_slot)); return -ENODEV; } } diff --git a/drivers/pci/hotplug/cpqphp.h b/drivers/pci/hotplug/cpqphp.h index b1decfa88b7a..afaf8f69f73e 100644 --- a/drivers/pci/hotplug/cpqphp.h +++ b/drivers/pci/hotplug/cpqphp.h @@ -449,6 +449,11 @@ extern u8 cpqhp_disk_irq; /* inline functions */ +static inline char *slot_name(struct slot *slot) +{ + return hotplug_slot_name(slot->hotplug_slot); +} + /* * return_resource * @@ -696,14 +701,6 @@ static inline int get_presence_status(struct controller *ctrl, struct slot *slot return presence_save; } -#define SLOT_NAME_SIZE 10 - -static inline void make_slot_name(char *buffer, int buffer_size, struct slot *slot) -{ - snprintf(buffer, buffer_size, "%d", slot->number); -} - - static inline int wait_for_ctrl_irq(struct controller *ctrl) { DECLARE_WAITQUEUE(wait, current); diff --git a/drivers/pci/hotplug/cpqphp_core.c b/drivers/pci/hotplug/cpqphp_core.c index 54defec51d08..724d42c4adbc 100644 --- a/drivers/pci/hotplug/cpqphp_core.c +++ b/drivers/pci/hotplug/cpqphp_core.c @@ -315,14 +315,15 @@ static void release_slot(struct hotplug_slot *hotplug_slot) { struct slot *slot = hotplug_slot->private; - dbg("%s - physical_slot = %s\n", __func__, hotplug_slot->name); + dbg("%s - physical_slot = %s\n", __func__, slot_name(slot)); kfree(slot->hotplug_slot->info); - kfree(slot->hotplug_slot->name); kfree(slot->hotplug_slot); kfree(slot); } +#define SLOT_NAME_SIZE 10 + static int ctrl_slot_setup(struct controller *ctrl, void __iomem *smbios_start, void __iomem *smbios_table) @@ -335,6 +336,7 @@ static int ctrl_slot_setup(struct controller *ctrl, u8 slot_number; u8 ctrl_slot; u32 tempdword; + char name[SLOT_NAME_SIZE]; void __iomem *slot_entry= NULL; int result = -ENOMEM; @@ -363,16 +365,12 @@ static int ctrl_slot_setup(struct controller *ctrl, if (!hotplug_slot->info) goto error_hpslot; hotplug_slot_info = hotplug_slot->info; - hotplug_slot->name = kmalloc(SLOT_NAME_SIZE, GFP_KERNEL); - - if (!hotplug_slot->name) - goto error_info; slot->ctrl = ctrl; slot->bus = ctrl->bus; slot->device = slot_device; slot->number = slot_number; - dbg("slot->number = %d\n", slot->number); + dbg("slot->number = %u\n", slot->number); slot_entry = get_SMBIOS_entry(smbios_start, smbios_table, 9, slot_entry); @@ -418,9 +416,9 @@ static int ctrl_slot_setup(struct controller *ctrl, /* register this slot with the hotplug pci core */ hotplug_slot->release = &release_slot; hotplug_slot->private = slot; - make_slot_name(hotplug_slot->name, SLOT_NAME_SIZE, slot); + snprintf(name, SLOT_NAME_SIZE, "%u", slot->number); hotplug_slot->ops = &cpqphp_hotplug_slot_ops; - + hotplug_slot_info->power_status = get_slot_enabled(ctrl, slot); hotplug_slot_info->attention_status = cpq_get_attention_status(ctrl, slot); @@ -436,10 +434,11 @@ static int ctrl_slot_setup(struct controller *ctrl, slot_number); result = pci_hp_register(hotplug_slot, ctrl->pci_dev->subordinate, - slot->device); + slot->device, + name); if (result) { err("pci_hp_register failed with error %d\n", result); - goto error_name; + goto error_info; } slot->next = ctrl->slot; @@ -451,8 +450,6 @@ static int ctrl_slot_setup(struct controller *ctrl, } return 0; -error_name: - kfree(hotplug_slot->name); error_info: kfree(hotplug_slot_info); error_hpslot: @@ -638,7 +635,7 @@ static int set_attention_status (struct hotplug_slot *hotplug_slot, u8 status) u8 device; u8 function; - dbg("%s - physical_slot = %s\n", __func__, hotplug_slot->name); + dbg("%s - physical_slot = %s\n", __func__, slot_name(slot)); if (cpqhp_get_bus_dev(ctrl, &bus, &devfn, slot->number) == -1) return -ENODEV; @@ -665,7 +662,7 @@ static int process_SI(struct hotplug_slot *hotplug_slot) u8 device; u8 function; - dbg("%s - physical_slot = %s\n", __func__, hotplug_slot->name); + dbg("%s - physical_slot = %s\n", __func__, slot_name(slot)); if (cpqhp_get_bus_dev(ctrl, &bus, &devfn, slot->number) == -1) return -ENODEV; @@ -697,7 +694,7 @@ static int process_SS(struct hotplug_slot *hotplug_slot) u8 device; u8 function; - dbg("%s - physical_slot = %s\n", __func__, hotplug_slot->name); + dbg("%s - physical_slot = %s\n", __func__, slot_name(slot)); if (cpqhp_get_bus_dev(ctrl, &bus, &devfn, slot->number) == -1) return -ENODEV; @@ -720,7 +717,7 @@ static int hardware_test(struct hotplug_slot *hotplug_slot, u32 value) struct slot *slot = hotplug_slot->private; struct controller *ctrl = slot->ctrl; - dbg("%s - physical_slot = %s\n", __func__, hotplug_slot->name); + dbg("%s - physical_slot = %s\n", __func__, slot_name(slot)); return cpqhp_hardware_test(ctrl, value); } @@ -731,7 +728,7 @@ static int get_power_status(struct hotplug_slot *hotplug_slot, u8 *value) struct slot *slot = hotplug_slot->private; struct controller *ctrl = slot->ctrl; - dbg("%s - physical_slot = %s\n", __func__, hotplug_slot->name); + dbg("%s - physical_slot = %s\n", __func__, slot_name(slot)); *value = get_slot_enabled(ctrl, slot); return 0; @@ -742,7 +739,7 @@ static int get_attention_status(struct hotplug_slot *hotplug_slot, u8 *value) struct slot *slot = hotplug_slot->private; struct controller *ctrl = slot->ctrl; - dbg("%s - physical_slot = %s\n", __func__, hotplug_slot->name); + dbg("%s - physical_slot = %s\n", __func__, slot_name(slot)); *value = cpq_get_attention_status(ctrl, slot); return 0; @@ -753,7 +750,7 @@ static int get_latch_status(struct hotplug_slot *hotplug_slot, u8 *value) struct slot *slot = hotplug_slot->private; struct controller *ctrl = slot->ctrl; - dbg("%s - physical_slot = %s\n", __func__, hotplug_slot->name); + dbg("%s - physical_slot = %s\n", __func__, slot_name(slot)); *value = cpq_get_latch_status(ctrl, slot); @@ -765,7 +762,7 @@ static int get_adapter_status(struct hotplug_slot *hotplug_slot, u8 *value) struct slot *slot = hotplug_slot->private; struct controller *ctrl = slot->ctrl; - dbg("%s - physical_slot = %s\n", __func__, hotplug_slot->name); + dbg("%s - physical_slot = %s\n", __func__, slot_name(slot)); *value = get_presence_status(ctrl, slot); @@ -777,7 +774,7 @@ static int get_max_bus_speed (struct hotplug_slot *hotplug_slot, enum pci_bus_sp struct slot *slot = hotplug_slot->private; struct controller *ctrl = slot->ctrl; - dbg("%s - physical_slot = %s\n", __func__, hotplug_slot->name); + dbg("%s - physical_slot = %s\n", __func__, slot_name(slot)); *value = ctrl->speed_capability; @@ -789,7 +786,7 @@ static int get_cur_bus_speed (struct hotplug_slot *hotplug_slot, enum pci_bus_sp struct slot *slot = hotplug_slot->private; struct controller *ctrl = slot->ctrl; - dbg("%s - physical_slot = %s\n", __func__, hotplug_slot->name); + dbg("%s - physical_slot = %s\n", __func__, slot_name(slot)); *value = ctrl->speed; diff --git a/drivers/pci/hotplug/cpqphp_ctrl.c b/drivers/pci/hotplug/cpqphp_ctrl.c index ef041ca91c27..a60a25290995 100644 --- a/drivers/pci/hotplug/cpqphp_ctrl.c +++ b/drivers/pci/hotplug/cpqphp_ctrl.c @@ -1139,7 +1139,7 @@ static u8 set_controller_speed(struct controller *ctrl, u8 adapter_speed, u8 hp_ for(slot = ctrl->slot; slot; slot = slot->next) { if (slot->device == (hp_slot + ctrl->slot_device_offset)) continue; - if (!slot->hotplug_slot && !slot->hotplug_slot->info) + if (!slot->hotplug_slot || !slot->hotplug_slot->info) continue; if (slot->hotplug_slot->info->adapter_status == 0) continue; diff --git a/drivers/pci/hotplug/fakephp.c b/drivers/pci/hotplug/fakephp.c index 146ca9cd1567..3a2637a00934 100644 --- a/drivers/pci/hotplug/fakephp.c +++ b/drivers/pci/hotplug/fakephp.c @@ -66,10 +66,10 @@ struct dummy_slot { struct pci_dev *dev; struct work_struct remove_work; unsigned long removed; - char name[8]; }; static int debug; +static int dup_slots; static LIST_HEAD(slot_list); static struct workqueue_struct *dummyphp_wq; @@ -96,10 +96,13 @@ static void dummy_release(struct hotplug_slot *slot) kfree(dslot); } +#define SLOT_NAME_SIZE 8 + static int add_slot(struct pci_dev *dev) { struct dummy_slot *dslot; struct hotplug_slot *slot; + char name[SLOT_NAME_SIZE]; int retval = -ENOMEM; static int count = 1; @@ -119,19 +122,22 @@ static int add_slot(struct pci_dev *dev) if (!dslot) goto error_info; - slot->name = dslot->name; - snprintf(slot->name, sizeof(dslot->name), "fake%d", count++); - dbg("slot->name = %s\n", slot->name); + if (dup_slots) + snprintf(name, SLOT_NAME_SIZE, "fake"); + else + snprintf(name, SLOT_NAME_SIZE, "fake%d", count++); + dbg("slot->name = %s\n", name); slot->ops = &dummy_hotplug_slot_ops; slot->release = &dummy_release; slot->private = dslot; - retval = pci_hp_register(slot, dev->bus, PCI_SLOT(dev->devfn)); + retval = pci_hp_register(slot, dev->bus, PCI_SLOT(dev->devfn), name); if (retval) { err("pci_hp_register failed with error %d\n", retval); goto error_dslot; } + dbg("slot->name = %s\n", hotplug_slot_name(slot)); dslot->slot = slot; dslot->dev = pci_dev_get(dev); list_add (&dslot->node, &slot_list); @@ -167,10 +173,11 @@ static void remove_slot(struct dummy_slot *dslot) { int retval; - dbg("removing slot %s\n", dslot->slot->name); + dbg("removing slot %s\n", hotplug_slot_name(dslot->slot)); retval = pci_hp_deregister(dslot->slot); if (retval) - err("Problem unregistering a slot %s\n", dslot->slot->name); + err("Problem unregistering a slot %s\n", + hotplug_slot_name(dslot->slot)); } /* called from the single-threaded workqueue handler to remove a slot */ @@ -308,7 +315,7 @@ static int disable_slot(struct hotplug_slot *slot) return -ENODEV; dslot = slot->private; - dbg("%s - physical_slot = %s\n", __func__, slot->name); + dbg("%s - physical_slot = %s\n", __func__, hotplug_slot_name(slot)); for (func = 7; func >= 0; func--) { dev = pci_get_slot(dslot->dev->bus, dslot->dev->devfn + func); @@ -373,4 +380,5 @@ MODULE_DESCRIPTION(DRIVER_DESC); MODULE_LICENSE("GPL"); module_param(debug, bool, S_IRUGO | S_IWUSR); MODULE_PARM_DESC(debug, "Debugging mode enabled or not"); - +module_param(dup_slots, bool, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(dup_slots, "Force duplicate slot names for debugging"); diff --git a/drivers/pci/hotplug/ibmphp.h b/drivers/pci/hotplug/ibmphp.h index 612d96301509..a8d391a4957d 100644 --- a/drivers/pci/hotplug/ibmphp.h +++ b/drivers/pci/hotplug/ibmphp.h @@ -707,17 +707,16 @@ struct slot { u8 device; u8 number; u8 real_physical_slot_num; - char name[100]; u32 capabilities; u8 supported_speed; u8 supported_bus_mode; + u8 flag; /* this is for disable slot and polling */ + u8 ctlr_index; struct hotplug_slot *hotplug_slot; struct controller *ctrl; struct pci_func *func; u8 irq[4]; - u8 flag; /* this is for disable slot and polling */ int bit_mode; /* 0 = 32, 1 = 64 */ - u8 ctlr_index; struct bus_info *bus_on; struct list_head ibm_slot_list; u8 status; diff --git a/drivers/pci/hotplug/ibmphp_ebda.c b/drivers/pci/hotplug/ibmphp_ebda.c index 8cfd1c4926c8..c1abac8ab5c3 100644 --- a/drivers/pci/hotplug/ibmphp_ebda.c +++ b/drivers/pci/hotplug/ibmphp_ebda.c @@ -587,11 +587,14 @@ static u8 calculate_first_slot (u8 slot_num) return first_slot + 1; } + +#define SLOT_NAME_SIZE 30 + static char *create_file_name (struct slot * slot_cur) { struct opt_rio *opt_vg_ptr = NULL; struct opt_rio_lo *opt_lo_ptr = NULL; - static char str[30]; + static char str[SLOT_NAME_SIZE]; int which = 0; /* rxe = 1, chassis = 0 */ u8 number = 1; /* either chassis or rxe # */ u8 first_slot = 1; @@ -703,7 +706,6 @@ static void release_slot(struct hotplug_slot *hotplug_slot) slot = hotplug_slot->private; kfree(slot->hotplug_slot->info); - kfree(slot->hotplug_slot->name); kfree(slot->hotplug_slot); slot->ctrl = NULL; slot->bus_on = NULL; @@ -734,6 +736,7 @@ static int __init ebda_rsrc_controller (void) struct bus_info *bus_info_ptr1, *bus_info_ptr2; int rc; struct slot *tmp_slot; + char name[SLOT_NAME_SIZE]; addr = hpc_list_ptr->phys_addr; for (ctlr = 0; ctlr < hpc_list_ptr->num_ctlrs; ctlr++) { @@ -897,12 +900,6 @@ static int __init ebda_rsrc_controller (void) goto error_no_hp_info; } - hp_slot_ptr->name = kmalloc(30, GFP_KERNEL); - if (!hp_slot_ptr->name) { - rc = -ENOMEM; - goto error_no_hp_name; - } - tmp_slot = kzalloc(sizeof(*tmp_slot), GFP_KERNEL); if (!tmp_slot) { rc = -ENOMEM; @@ -964,9 +961,9 @@ static int __init ebda_rsrc_controller (void) } /* each hpc */ list_for_each_entry(tmp_slot, &ibmphp_slot_head, ibm_slot_list) { - snprintf (tmp_slot->hotplug_slot->name, 30, "%s", create_file_name (tmp_slot)); + snprintf(name, SLOT_NAME_SIZE, "%s", create_file_name(tmp_slot)); pci_hp_register(tmp_slot->hotplug_slot, - pci_find_bus(0, tmp_slot->bus), tmp_slot->device); + pci_find_bus(0, tmp_slot->bus), tmp_slot->device, name); } print_ebda_hpc (); @@ -976,8 +973,6 @@ static int __init ebda_rsrc_controller (void) error: kfree (hp_slot_ptr->private); error_no_slot: - kfree (hp_slot_ptr->name); -error_no_hp_name: kfree (hp_slot_ptr->info); error_no_hp_info: kfree (hp_slot_ptr); diff --git a/drivers/pci/hotplug/pci_hotplug_core.c b/drivers/pci/hotplug/pci_hotplug_core.c index 2e6c4474644e..535fce0f07f9 100644 --- a/drivers/pci/hotplug/pci_hotplug_core.c +++ b/drivers/pci/hotplug/pci_hotplug_core.c @@ -37,6 +37,7 @@ #include <linux/init.h> #include <linux/mount.h> #include <linux/namei.h> +#include <linux/mutex.h> #include <linux/pci.h> #include <linux/pci_hotplug.h> #include <asm/uaccess.h> @@ -61,7 +62,7 @@ static int debug; ////////////////////////////////////////////////////////////////// static LIST_HEAD(pci_hotplug_slot_list); -static DEFINE_SPINLOCK(pci_hotplug_slot_list_lock); +static DEFINE_MUTEX(pci_hp_mutex); /* these strings match up with the values in pci_bus_speed */ static char *pci_bus_speed_strings[] = { @@ -530,16 +531,12 @@ static struct hotplug_slot *get_slot_from_name (const char *name) struct hotplug_slot *slot; struct list_head *tmp; - spin_lock(&pci_hotplug_slot_list_lock); list_for_each (tmp, &pci_hotplug_slot_list) { slot = list_entry (tmp, struct hotplug_slot, slot_list); - if (strcmp(slot->name, name) == 0) - goto out; + if (strcmp(hotplug_slot_name(slot), name) == 0) + return slot; } - slot = NULL; -out: - spin_unlock(&pci_hotplug_slot_list_lock); - return slot; + return NULL; } /** @@ -547,13 +544,15 @@ out: * @bus: bus this slot is on * @slot: pointer to the &struct hotplug_slot to register * @slot_nr: slot number + * @name: name registered with kobject core * * Registers a hotplug slot with the pci hotplug subsystem, which will allow * userspace interaction to the slot. * * Returns 0 if successful, anything else for an error. */ -int pci_hp_register(struct hotplug_slot *slot, struct pci_bus *bus, int slot_nr) +int pci_hp_register(struct hotplug_slot *slot, struct pci_bus *bus, int slot_nr, + const char *name) { int result; struct pci_slot *pci_slot; @@ -568,48 +567,29 @@ int pci_hp_register(struct hotplug_slot *slot, struct pci_bus *bus, int slot_nr) return -EINVAL; } - /* Check if we have already registered a slot with the same name. */ - if (get_slot_from_name(slot->name)) - return -EEXIST; + mutex_lock(&pci_hp_mutex); /* * No problems if we call this interface from both ACPI_PCI_SLOT * driver and call it here again. If we've already created the * pci_slot, the interface will simply bump the refcount. */ - pci_slot = pci_create_slot(bus, slot_nr, slot->name); - if (IS_ERR(pci_slot)) - return PTR_ERR(pci_slot); - - if (pci_slot->hotplug) { - dbg("%s: already claimed\n", __func__); - pci_destroy_slot(pci_slot); - return -EBUSY; + pci_slot = pci_create_slot(bus, slot_nr, name, slot); + if (IS_ERR(pci_slot)) { + result = PTR_ERR(pci_slot); + goto out; } slot->pci_slot = pci_slot; pci_slot->hotplug = slot; - /* - * Allow pcihp drivers to override the ACPI_PCI_SLOT name. - */ - if (strcmp(kobject_name(&pci_slot->kobj), slot->name)) { - result = kobject_rename(&pci_slot->kobj, slot->name); - if (result) { - pci_destroy_slot(pci_slot); - return result; - } - } - - spin_lock(&pci_hotplug_slot_list_lock); list_add(&slot->slot_list, &pci_hotplug_slot_list); - spin_unlock(&pci_hotplug_slot_list_lock); result = fs_add_slot(pci_slot); kobject_uevent(&pci_slot->kobj, KOBJ_ADD); - dbg("Added slot %s to the list\n", slot->name); - - + dbg("Added slot %s to the list\n", name); +out: + mutex_unlock(&pci_hp_mutex); return result; } @@ -630,21 +610,23 @@ int pci_hp_deregister(struct hotplug_slot *hotplug) if (!hotplug) return -ENODEV; - temp = get_slot_from_name(hotplug->name); - if (temp != hotplug) + mutex_lock(&pci_hp_mutex); + temp = get_slot_from_name(hotplug_slot_name(hotplug)); + if (temp != hotplug) { + mutex_unlock(&pci_hp_mutex); return -ENODEV; + } - spin_lock(&pci_hotplug_slot_list_lock); list_del(&hotplug->slot_list); - spin_unlock(&pci_hotplug_slot_list_lock); slot = hotplug->pci_slot; fs_remove_slot(slot); - dbg("Removed slot %s from the list\n", hotplug->name); + dbg("Removed slot %s from the list\n", hotplug_slot_name(hotplug)); hotplug->release(hotplug); slot->hotplug = NULL; pci_destroy_slot(slot); + mutex_unlock(&pci_hp_mutex); return 0; } diff --git a/drivers/pci/hotplug/pciehp.h b/drivers/pci/hotplug/pciehp.h index c367978bd7fe..a4817a841fae 100644 --- a/drivers/pci/hotplug/pciehp.h +++ b/drivers/pci/hotplug/pciehp.h @@ -74,15 +74,13 @@ extern struct workqueue_struct *pciehp_wq; struct slot { u8 bus; u8 device; - u32 number; u8 state; - struct timer_list task_event; u8 hp_slot; + u32 number; struct controller *ctrl; struct hpc_ops *hpc_ops; struct hotplug_slot *hotplug_slot; struct list_head slot_list; - char name[SLOT_NAME_SIZE]; unsigned long last_emi_toggle; struct delayed_work work; /* work for button event */ struct mutex lock; @@ -112,6 +110,7 @@ struct controller { struct timer_list poll_timer; int cmd_busy; unsigned int no_cmd_complete:1; + unsigned int link_active_reporting:1; }; #define INT_BUTTON_IGNORE 0 @@ -175,6 +174,11 @@ int pciehp_enable_slot(struct slot *p_slot); int pciehp_disable_slot(struct slot *p_slot); int pcie_enable_notification(struct controller *ctrl); +static inline const char *slot_name(struct slot *slot) +{ + return hotplug_slot_name(slot->hotplug_slot); +} + static inline struct slot *pciehp_find_slot(struct controller *ctrl, u8 device) { struct slot *slot; diff --git a/drivers/pci/hotplug/pciehp_core.c b/drivers/pci/hotplug/pciehp_core.c index c748a19db89d..62be1b59c74b 100644 --- a/drivers/pci/hotplug/pciehp_core.c +++ b/drivers/pci/hotplug/pciehp_core.c @@ -185,7 +185,7 @@ static void release_slot(struct hotplug_slot *hotplug_slot) struct slot *slot = hotplug_slot->private; ctrl_dbg(slot->ctrl, "%s - physical_slot = %s\n", - __func__, hotplug_slot->name); + __func__, hotplug_slot_name(hotplug_slot)); kfree(hotplug_slot->info); kfree(hotplug_slot); @@ -196,7 +196,7 @@ static int init_slots(struct controller *ctrl) struct slot *slot; struct hotplug_slot *hotplug_slot; struct hotplug_slot_info *info; - int len, dup = 1; + char name[SLOT_NAME_SIZE]; int retval = -ENOMEM; list_for_each_entry(slot, &ctrl->slot_list, slot_list) { @@ -210,41 +210,28 @@ static int init_slots(struct controller *ctrl) /* register this slot with the hotplug pci core */ hotplug_slot->info = info; - hotplug_slot->name = slot->name; hotplug_slot->private = slot; hotplug_slot->release = &release_slot; hotplug_slot->ops = &pciehp_hotplug_slot_ops; - get_power_status(hotplug_slot, &info->power_status); - get_attention_status(hotplug_slot, &info->attention_status); - get_latch_status(hotplug_slot, &info->latch_status); - get_adapter_status(hotplug_slot, &info->adapter_status); slot->hotplug_slot = hotplug_slot; + snprintf(name, SLOT_NAME_SIZE, "%u", slot->number); ctrl_dbg(ctrl, "Registering bus=%x dev=%x hp_slot=%x sun=%x " "slot_device_offset=%x\n", slot->bus, slot->device, slot->hp_slot, slot->number, ctrl->slot_device_offset); -duplicate_name: retval = pci_hp_register(hotplug_slot, ctrl->pci_dev->subordinate, - slot->device); + slot->device, + name); if (retval) { - /* - * If slot N already exists, we'll try to create - * slot N-1, N-2 ... N-M, until we overflow. - */ - if (retval == -EEXIST) { - len = snprintf(slot->name, SLOT_NAME_SIZE, - "%d-%d", slot->number, dup++); - if (len < SLOT_NAME_SIZE) - goto duplicate_name; - else - ctrl_err(ctrl, "duplicate slot name " - "overflow\n"); - } ctrl_err(ctrl, "pci_hp_register failed with error %d\n", retval); goto error_info; } + get_power_status(hotplug_slot, &info->power_status); + get_attention_status(hotplug_slot, &info->attention_status); + get_latch_status(hotplug_slot, &info->latch_status); + get_adapter_status(hotplug_slot, &info->adapter_status); /* create additional sysfs entries */ if (EMI(ctrl)) { retval = sysfs_create_file(&hotplug_slot->pci_slot->kobj, @@ -287,7 +274,7 @@ static int set_attention_status(struct hotplug_slot *hotplug_slot, u8 status) struct slot *slot = hotplug_slot->private; ctrl_dbg(slot->ctrl, "%s - physical_slot = %s\n", - __func__, hotplug_slot->name); + __func__, slot_name(slot)); hotplug_slot->info->attention_status = status; @@ -303,7 +290,7 @@ static int enable_slot(struct hotplug_slot *hotplug_slot) struct slot *slot = hotplug_slot->private; ctrl_dbg(slot->ctrl, "%s - physical_slot = %s\n", - __func__, hotplug_slot->name); + __func__, slot_name(slot)); return pciehp_sysfs_enable_slot(slot); } @@ -314,7 +301,7 @@ static int disable_slot(struct hotplug_slot *hotplug_slot) struct slot *slot = hotplug_slot->private; ctrl_dbg(slot->ctrl, "%s - physical_slot = %s\n", - __func__, hotplug_slot->name); + __func__, slot_name(slot)); return pciehp_sysfs_disable_slot(slot); } @@ -325,7 +312,7 @@ static int get_power_status(struct hotplug_slot *hotplug_slot, u8 *value) int retval; ctrl_dbg(slot->ctrl, "%s - physical_slot = %s\n", - __func__, hotplug_slot->name); + __func__, slot_name(slot)); retval = slot->hpc_ops->get_power_status(slot, value); if (retval < 0) @@ -340,7 +327,7 @@ static int get_attention_status(struct hotplug_slot *hotplug_slot, u8 *value) int retval; ctrl_dbg(slot->ctrl, "%s - physical_slot = %s\n", - __func__, hotplug_slot->name); + __func__, slot_name(slot)); retval = slot->hpc_ops->get_attention_status(slot, value); if (retval < 0) @@ -355,7 +342,7 @@ static int get_latch_status(struct hotplug_slot *hotplug_slot, u8 *value) int retval; ctrl_dbg(slot->ctrl, "%s - physical_slot = %s\n", - __func__, hotplug_slot->name); + __func__, slot_name(slot)); retval = slot->hpc_ops->get_latch_status(slot, value); if (retval < 0) @@ -370,7 +357,7 @@ static int get_adapter_status(struct hotplug_slot *hotplug_slot, u8 *value) int retval; ctrl_dbg(slot->ctrl, "%s - physical_slot = %s\n", - __func__, hotplug_slot->name); + __func__, slot_name(slot)); retval = slot->hpc_ops->get_adapter_status(slot, value); if (retval < 0) @@ -386,7 +373,7 @@ static int get_max_bus_speed(struct hotplug_slot *hotplug_slot, int retval; ctrl_dbg(slot->ctrl, "%s - physical_slot = %s\n", - __func__, hotplug_slot->name); + __func__, slot_name(slot)); retval = slot->hpc_ops->get_max_bus_speed(slot, value); if (retval < 0) @@ -401,7 +388,7 @@ static int get_cur_bus_speed(struct hotplug_slot *hotplug_slot, enum pci_bus_spe int retval; ctrl_dbg(slot->ctrl, "%s - physical_slot = %s\n", - __func__, hotplug_slot->name); + __func__, slot_name(slot)); retval = slot->hpc_ops->get_cur_bus_speed(slot, value); if (retval < 0) diff --git a/drivers/pci/hotplug/pciehp_ctrl.c b/drivers/pci/hotplug/pciehp_ctrl.c index acb7f9efd182..d6c5eb297753 100644 --- a/drivers/pci/hotplug/pciehp_ctrl.c +++ b/drivers/pci/hotplug/pciehp_ctrl.c @@ -66,7 +66,7 @@ u8 pciehp_handle_attention_button(struct slot *p_slot) /* * Button pressed - See if need to TAKE ACTION!!! */ - ctrl_info(ctrl, "Button pressed on Slot(%s)\n", p_slot->name); + ctrl_info(ctrl, "Button pressed on Slot(%s)\n", slot_name(p_slot)); event_type = INT_BUTTON_PRESS; queue_interrupt_event(p_slot, event_type); @@ -88,13 +88,13 @@ u8 pciehp_handle_switch_change(struct slot *p_slot) /* * Switch opened */ - ctrl_info(ctrl, "Latch open on Slot(%s)\n", p_slot->name); + ctrl_info(ctrl, "Latch open on Slot(%s)\n", slot_name(p_slot)); event_type = INT_SWITCH_OPEN; } else { /* * Switch closed */ - ctrl_info(ctrl, "Latch close on Slot(%s)\n", p_slot->name); + ctrl_info(ctrl, "Latch close on Slot(%s)\n", slot_name(p_slot)); event_type = INT_SWITCH_CLOSE; } @@ -120,13 +120,14 @@ u8 pciehp_handle_presence_change(struct slot *p_slot) /* * Card Present */ - ctrl_info(ctrl, "Card present on Slot(%s)\n", p_slot->name); + ctrl_info(ctrl, "Card present on Slot(%s)\n", slot_name(p_slot)); event_type = INT_PRESENCE_ON; } else { /* * Not Present */ - ctrl_info(ctrl, "Card not present on Slot(%s)\n", p_slot->name); + ctrl_info(ctrl, "Card not present on Slot(%s)\n", + slot_name(p_slot)); event_type = INT_PRESENCE_OFF; } @@ -148,13 +149,13 @@ u8 pciehp_handle_power_fault(struct slot *p_slot) * power fault Cleared */ ctrl_info(ctrl, "Power fault cleared on Slot(%s)\n", - p_slot->name); + slot_name(p_slot)); event_type = INT_POWER_FAULT_CLEAR; } else { /* * power fault */ - ctrl_info(ctrl, "Power fault on Slot(%s)\n", p_slot->name); + ctrl_info(ctrl, "Power fault on Slot(%s)\n", slot_name(p_slot)); event_type = INT_POWER_FAULT; ctrl_info(ctrl, "power fault bit %x set\n", 0); } @@ -225,9 +226,6 @@ static int board_added(struct slot *p_slot) if (PWR_LED(ctrl)) p_slot->hpc_ops->green_led_blink(p_slot); - /* Wait for ~1 second */ - msleep(1000); - /* Check link training status */ retval = p_slot->hpc_ops->check_lnk_status(ctrl); if (retval) { @@ -412,12 +410,12 @@ static void handle_button_press_event(struct slot *p_slot) p_slot->state = BLINKINGOFF_STATE; ctrl_info(ctrl, "PCI slot #%s - powering off due to button " - "press.\n", p_slot->name); + "press.\n", slot_name(p_slot)); } else { p_slot->state = BLINKINGON_STATE; ctrl_info(ctrl, "PCI slot #%s - powering on due to button " - "press.\n", p_slot->name); + "press.\n", slot_name(p_slot)); } /* blink green LED and turn off amber */ if (PWR_LED(ctrl)) @@ -434,7 +432,7 @@ static void handle_button_press_event(struct slot *p_slot) * press the attention again before the 5 sec. limit * expires to cancel hot-add or hot-remove */ - ctrl_info(ctrl, "Button cancel on Slot(%s)\n", p_slot->name); + ctrl_info(ctrl, "Button cancel on Slot(%s)\n", slot_name(p_slot)); ctrl_dbg(ctrl, "%s: button cancel\n", __func__); cancel_delayed_work(&p_slot->work); if (p_slot->state == BLINKINGOFF_STATE) { @@ -447,7 +445,7 @@ static void handle_button_press_event(struct slot *p_slot) if (ATTN_LED(ctrl)) p_slot->hpc_ops->set_attention_status(p_slot, 0); ctrl_info(ctrl, "PCI slot #%s - action canceled " - "due to button press\n", p_slot->name); + "due to button press\n", slot_name(p_slot)); p_slot->state = STATIC_STATE; break; case POWEROFF_STATE: @@ -457,7 +455,7 @@ static void handle_button_press_event(struct slot *p_slot) * this means that the previous attention button action * to hot-add or hot-remove is undergoing */ - ctrl_info(ctrl, "Button ignore on Slot(%s)\n", p_slot->name); + ctrl_info(ctrl, "Button ignore on Slot(%s)\n", slot_name(p_slot)); update_slot_info(p_slot); break; default: @@ -540,7 +538,7 @@ int pciehp_enable_slot(struct slot *p_slot) rc = p_slot->hpc_ops->get_adapter_status(p_slot, &getstatus); if (rc || !getstatus) { ctrl_info(ctrl, "%s: no adapter on slot(%s)\n", - __func__, p_slot->name); + __func__, slot_name(p_slot)); mutex_unlock(&p_slot->ctrl->crit_sect); return -ENODEV; } @@ -548,7 +546,7 @@ int pciehp_enable_slot(struct slot *p_slot) rc = p_slot->hpc_ops->get_latch_status(p_slot, &getstatus); if (rc || getstatus) { ctrl_info(ctrl, "%s: latch open on slot(%s)\n", - __func__, p_slot->name); + __func__, slot_name(p_slot)); mutex_unlock(&p_slot->ctrl->crit_sect); return -ENODEV; } @@ -558,7 +556,7 @@ int pciehp_enable_slot(struct slot *p_slot) rc = p_slot->hpc_ops->get_power_status(p_slot, &getstatus); if (rc || getstatus) { ctrl_info(ctrl, "%s: already enabled on slot(%s)\n", - __func__, p_slot->name); + __func__, slot_name(p_slot)); mutex_unlock(&p_slot->ctrl->crit_sect); return -EINVAL; } @@ -594,7 +592,7 @@ int pciehp_disable_slot(struct slot *p_slot) ret = p_slot->hpc_ops->get_adapter_status(p_slot, &getstatus); if (ret || !getstatus) { ctrl_info(ctrl, "%s: no adapter on slot(%s)\n", - __func__, p_slot->name); + __func__, slot_name(p_slot)); mutex_unlock(&p_slot->ctrl->crit_sect); return -ENODEV; } @@ -604,7 +602,7 @@ int pciehp_disable_slot(struct slot *p_slot) ret = p_slot->hpc_ops->get_latch_status(p_slot, &getstatus); if (ret || getstatus) { ctrl_info(ctrl, "%s: latch open on slot(%s)\n", - __func__, p_slot->name); + __func__, slot_name(p_slot)); mutex_unlock(&p_slot->ctrl->crit_sect); return -ENODEV; } @@ -614,7 +612,7 @@ int pciehp_disable_slot(struct slot *p_slot) ret = p_slot->hpc_ops->get_power_status(p_slot, &getstatus); if (ret || !getstatus) { ctrl_info(ctrl, "%s: already disabled slot(%s)\n", - __func__, p_slot->name); + __func__, slot_name(p_slot)); mutex_unlock(&p_slot->ctrl->crit_sect); return -EINVAL; } @@ -645,14 +643,16 @@ int pciehp_sysfs_enable_slot(struct slot *p_slot) break; case POWERON_STATE: ctrl_info(ctrl, "Slot %s is already in powering on state\n", - p_slot->name); + slot_name(p_slot)); break; case BLINKINGOFF_STATE: case POWEROFF_STATE: - ctrl_info(ctrl, "Already enabled on slot %s\n", p_slot->name); + ctrl_info(ctrl, "Already enabled on slot %s\n", + slot_name(p_slot)); break; default: - ctrl_err(ctrl, "Not a valid state on slot %s\n", p_slot->name); + ctrl_err(ctrl, "Not a valid state on slot %s\n", + slot_name(p_slot)); break; } mutex_unlock(&p_slot->lock); @@ -678,14 +678,16 @@ int pciehp_sysfs_disable_slot(struct slot *p_slot) break; case POWEROFF_STATE: ctrl_info(ctrl, "Slot %s is already in powering off state\n", - p_slot->name); + slot_name(p_slot)); break; case BLINKINGON_STATE: case POWERON_STATE: - ctrl_info(ctrl, "Already disabled on slot %s\n", p_slot->name); + ctrl_info(ctrl, "Already disabled on slot %s\n", + slot_name(p_slot)); break; default: - ctrl_err(ctrl, "Not a valid state on slot %s\n", p_slot->name); + ctrl_err(ctrl, "Not a valid state on slot %s\n", + slot_name(p_slot)); break; } mutex_unlock(&p_slot->lock); diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c index 8e9530c4c36d..58c72d2cc217 100644 --- a/drivers/pci/hotplug/pciehp_hpc.c +++ b/drivers/pci/hotplug/pciehp_hpc.c @@ -125,6 +125,7 @@ static inline int pciehp_writel(struct controller *ctrl, int reg, u32 value) /* Field definitions in Link Capabilities Register */ #define MAX_LNK_SPEED 0x000F #define MAX_LNK_WIDTH 0x03F0 +#define LINK_ACTIVE_REPORTING 0x00100000 /* Link Width Encoding */ #define LNK_X1 0x01 @@ -141,6 +142,7 @@ static inline int pciehp_writel(struct controller *ctrl, int reg, u32 value) #define LNK_TRN_ERR 0x0400 #define LNK_TRN 0x0800 #define SLOT_CLK_CONF 0x1000 +#define LINK_ACTIVE 0x2000 /* Field definitions in Slot Capabilities Register */ #define ATTN_BUTTN_PRSN 0x00000001 @@ -368,11 +370,52 @@ static int pcie_write_cmd(struct controller *ctrl, u16 cmd, u16 mask) return retval; } +static inline int check_link_active(struct controller *ctrl) +{ + u16 link_status; + + if (pciehp_readw(ctrl, LNKSTATUS, &link_status)) + return 0; + return !!(link_status & LINK_ACTIVE); +} + +static void pcie_wait_link_active(struct controller *ctrl) +{ + int timeout = 1000; + + if (check_link_active(ctrl)) + return; + while (timeout > 0) { + msleep(10); + timeout -= 10; + if (check_link_active(ctrl)) + return; + } + ctrl_dbg(ctrl, "Data Link Layer Link Active not set in 1000 msec\n"); +} + static int hpc_check_lnk_status(struct controller *ctrl) { u16 lnk_status; int retval = 0; + /* + * Data Link Layer Link Active Reporting must be capable for + * hot-plug capable downstream port. But old controller might + * not implement it. In this case, we wait for 1000 ms. + */ + if (ctrl->link_active_reporting){ + /* Wait for Data Link Layer Link Active bit to be set */ + pcie_wait_link_active(ctrl); + /* + * We must wait for 100 ms after the Data Link Layer + * Link Active bit reads 1b before initiating a + * configuration access to the hot added device. + */ + msleep(100); + } else + msleep(1000); + retval = pciehp_readw(ctrl, LNKSTATUS, &lnk_status); if (retval) { ctrl_err(ctrl, "%s: Cannot read LNKSTATUS register\n", @@ -1061,7 +1104,6 @@ static int pcie_init_slot(struct controller *ctrl) slot->device = ctrl->slot_device_offset + slot->hp_slot; slot->hpc_ops = ctrl->hpc_ops; slot->number = ctrl->first_slot; - snprintf(slot->name, SLOT_NAME_SIZE, "%d", slot->number); mutex_init(&slot->lock); INIT_DELAYED_WORK(&slot->work, pciehp_queue_pushbutton_work); list_add(&slot->slot_list, &ctrl->slot_list); @@ -1132,7 +1174,7 @@ static inline void dbg_ctrl(struct controller *ctrl) struct controller *pcie_init(struct pcie_device *dev) { struct controller *ctrl; - u32 slot_cap; + u32 slot_cap, link_cap; struct pci_dev *pdev = dev->port; ctrl = kzalloc(sizeof(*ctrl), GFP_KERNEL); @@ -1148,11 +1190,11 @@ struct controller *pcie_init(struct pcie_device *dev) if (!ctrl->cap_base) { ctrl_err(ctrl, "%s: Cannot find PCI Express capability\n", __func__); - goto abort; + goto abort_ctrl; } if (pciehp_readl(ctrl, SLOTCAP, &slot_cap)) { ctrl_err(ctrl, "%s: Cannot read SLOTCAP register\n", __func__); - goto abort; + goto abort_ctrl; } ctrl->slot_cap = slot_cap; @@ -1174,6 +1216,16 @@ struct controller *pcie_init(struct pcie_device *dev) !(POWER_CTRL(ctrl) | ATTN_LED(ctrl) | PWR_LED(ctrl) | EMI(ctrl))) ctrl->no_cmd_complete = 1; + /* Check if Data Link Layer Link Active Reporting is implemented */ + if (pciehp_readl(ctrl, LNKCAP, &link_cap)) { + ctrl_err(ctrl, "%s: Cannot read LNKCAP register\n", __func__); + goto abort_ctrl; + } + if (link_cap & LINK_ACTIVE_REPORTING) { + ctrl_dbg(ctrl, "Link Active Reporting supported\n"); + ctrl->link_active_reporting = 1; + } + /* Clear all remaining event bits in Slot Status register */ if (pciehp_writew(ctrl, SLOTSTATUS, 0x1f)) goto abort_ctrl; diff --git a/drivers/pci/hotplug/rpaphp_slot.c b/drivers/pci/hotplug/rpaphp_slot.c index 50884507b8be..2ea9cf1a8d02 100644 --- a/drivers/pci/hotplug/rpaphp_slot.c +++ b/drivers/pci/hotplug/rpaphp_slot.c @@ -43,7 +43,7 @@ static void rpaphp_release_slot(struct hotplug_slot *hotplug_slot) void dealloc_slot_struct(struct slot *slot) { kfree(slot->hotplug_slot->info); - kfree(slot->hotplug_slot->name); + kfree(slot->name); kfree(slot->hotplug_slot); kfree(slot); } @@ -63,11 +63,9 @@ struct slot *alloc_slot_struct(struct device_node *dn, GFP_KERNEL); if (!slot->hotplug_slot->info) goto error_hpslot; - slot->hotplug_slot->name = kmalloc(strlen(drc_name) + 1, GFP_KERNEL); - if (!slot->hotplug_slot->name) + slot->name = kstrdup(drc_name, GFP_KERNEL); + if (!slot->name) goto error_info; - slot->name = slot->hotplug_slot->name; - strcpy(slot->name, drc_name); slot->dn = dn; slot->index = drc_index; slot->power_domain = power_domain; @@ -137,7 +135,7 @@ int rpaphp_register_slot(struct slot *slot) slotno = PCI_SLOT(PCI_DN(slot->dn->child)->devfn); else slotno = -1; - retval = pci_hp_register(php_slot, slot->bus, slotno); + retval = pci_hp_register(php_slot, slot->bus, slotno, slot->name); if (retval) { err("pci_hp_register failed with error %d\n", retval); return retval; diff --git a/drivers/pci/hotplug/sgi_hotplug.c b/drivers/pci/hotplug/sgi_hotplug.c index 59f42501acce..3eee70928d45 100644 --- a/drivers/pci/hotplug/sgi_hotplug.c +++ b/drivers/pci/hotplug/sgi_hotplug.c @@ -161,7 +161,8 @@ static int sn_pci_bus_valid(struct pci_bus *pci_bus) } static int sn_hp_slot_private_alloc(struct hotplug_slot *bss_hotplug_slot, - struct pci_bus *pci_bus, int device) + struct pci_bus *pci_bus, int device, + char *name) { struct pcibus_info *pcibus_info; struct slot *slot; @@ -173,15 +174,9 @@ static int sn_hp_slot_private_alloc(struct hotplug_slot *bss_hotplug_slot, return -ENOMEM; bss_hotplug_slot->private = slot; - bss_hotplug_slot->name = kmalloc(SN_SLOT_NAME_SIZE, GFP_KERNEL); - if (!bss_hotplug_slot->name) { - kfree(bss_hotplug_slot->private); - return -ENOMEM; - } - slot->device_num = device; slot->pci_bus = pci_bus; - sprintf(bss_hotplug_slot->name, "%04x:%02x:%02x", + sprintf(name, "%04x:%02x:%02x", pci_domain_nr(pci_bus), ((u16)pcibus_info->pbi_buscommon.bs_persist_busnum), device + 1); @@ -608,7 +603,6 @@ static inline int get_power_status(struct hotplug_slot *bss_hotplug_slot, static void sn_release_slot(struct hotplug_slot *bss_hotplug_slot) { kfree(bss_hotplug_slot->info); - kfree(bss_hotplug_slot->name); kfree(bss_hotplug_slot->private); kfree(bss_hotplug_slot); } @@ -618,6 +612,7 @@ static int sn_hotplug_slot_register(struct pci_bus *pci_bus) int device; struct pci_slot *pci_slot; struct hotplug_slot *bss_hotplug_slot; + char name[SN_SLOT_NAME_SIZE]; int rc = 0; /* @@ -645,15 +640,14 @@ static int sn_hotplug_slot_register(struct pci_bus *pci_bus) } if (sn_hp_slot_private_alloc(bss_hotplug_slot, - pci_bus, device)) { + pci_bus, device, name)) { rc = -ENOMEM; goto alloc_err; } - bss_hotplug_slot->ops = &sn_hotplug_slot_ops; bss_hotplug_slot->release = &sn_release_slot; - rc = pci_hp_register(bss_hotplug_slot, pci_bus, device); + rc = pci_hp_register(bss_hotplug_slot, pci_bus, device, name); if (rc) goto register_err; diff --git a/drivers/pci/hotplug/shpchp.h b/drivers/pci/hotplug/shpchp.h index 8a026f750deb..4d9fed00e1d0 100644 --- a/drivers/pci/hotplug/shpchp.h +++ b/drivers/pci/hotplug/shpchp.h @@ -69,15 +69,13 @@ struct slot { u8 state; u8 presence_save; u8 pwr_save; - struct timer_list task_event; - u8 hp_slot; struct controller *ctrl; struct hpc_ops *hpc_ops; struct hotplug_slot *hotplug_slot; struct list_head slot_list; - char name[SLOT_NAME_SIZE]; struct delayed_work work; /* work for button event */ struct mutex lock; + u8 hp_slot; }; struct event_info { @@ -169,6 +167,11 @@ extern void cleanup_slots(struct controller *ctrl); extern void shpchp_queue_pushbutton_work(struct work_struct *work); extern int shpc_init( struct controller *ctrl, struct pci_dev *pdev); +static inline const char *slot_name(struct slot *slot) +{ + return hotplug_slot_name(slot->hotplug_slot); +} + #ifdef CONFIG_ACPI #include <linux/pci-acpi.h> static inline int get_hp_params_from_firmware(struct pci_dev *dev, diff --git a/drivers/pci/hotplug/shpchp_core.c b/drivers/pci/hotplug/shpchp_core.c index cc38615395f1..7af9191df4d6 100644 --- a/drivers/pci/hotplug/shpchp_core.c +++ b/drivers/pci/hotplug/shpchp_core.c @@ -89,7 +89,7 @@ static void release_slot(struct hotplug_slot *hotplug_slot) { struct slot *slot = hotplug_slot->private; - dbg("%s - physical_slot = %s\n", __func__, hotplug_slot->name); + dbg("%s - physical_slot = %s\n", __func__, slot_name(slot)); kfree(slot->hotplug_slot->info); kfree(slot->hotplug_slot); @@ -101,8 +101,9 @@ static int init_slots(struct controller *ctrl) struct slot *slot; struct hotplug_slot *hotplug_slot; struct hotplug_slot_info *info; + char name[SLOT_NAME_SIZE]; int retval = -ENOMEM; - int i, len, dup = 1; + int i; for (i = 0; i < ctrl->num_slots; i++) { slot = kzalloc(sizeof(*slot), GFP_KERNEL); @@ -119,8 +120,6 @@ static int init_slots(struct controller *ctrl) goto error_hpslot; hotplug_slot->info = info; - hotplug_slot->name = slot->name; - slot->hp_slot = i; slot->ctrl = ctrl; slot->bus = ctrl->pci_dev->subordinate->number; @@ -133,37 +132,24 @@ static int init_slots(struct controller *ctrl) /* register this slot with the hotplug pci core */ hotplug_slot->private = slot; hotplug_slot->release = &release_slot; - snprintf(slot->name, SLOT_NAME_SIZE, "%d", slot->number); + snprintf(name, SLOT_NAME_SIZE, "%d", slot->number); hotplug_slot->ops = &shpchp_hotplug_slot_ops; - get_power_status(hotplug_slot, &info->power_status); - get_attention_status(hotplug_slot, &info->attention_status); - get_latch_status(hotplug_slot, &info->latch_status); - get_adapter_status(hotplug_slot, &info->adapter_status); - dbg("Registering bus=%x dev=%x hp_slot=%x sun=%x " "slot_device_offset=%x\n", slot->bus, slot->device, slot->hp_slot, slot->number, ctrl->slot_device_offset); -duplicate_name: retval = pci_hp_register(slot->hotplug_slot, - ctrl->pci_dev->subordinate, slot->device); + ctrl->pci_dev->subordinate, slot->device, name); if (retval) { - /* - * If slot N already exists, we'll try to create - * slot N-1, N-2 ... N-M, until we overflow. - */ - if (retval == -EEXIST) { - len = snprintf(slot->name, SLOT_NAME_SIZE, - "%d-%d", slot->number, dup++); - if (len < SLOT_NAME_SIZE) - goto duplicate_name; - else - err("duplicate slot name overflow\n"); - } err("pci_hp_register failed with error %d\n", retval); goto error_info; } + get_power_status(hotplug_slot, &info->power_status); + get_attention_status(hotplug_slot, &info->attention_status); + get_latch_status(hotplug_slot, &info->latch_status); + get_adapter_status(hotplug_slot, &info->adapter_status); + list_add(&slot->slot_list, &ctrl->slot_list); } @@ -201,7 +187,7 @@ static int set_attention_status (struct hotplug_slot *hotplug_slot, u8 status) { struct slot *slot = get_slot(hotplug_slot); - dbg("%s - physical_slot = %s\n", __func__, hotplug_slot->name); + dbg("%s - physical_slot = %s\n", __func__, slot_name(slot)); hotplug_slot->info->attention_status = status; slot->hpc_ops->set_attention_status(slot, status); @@ -213,7 +199,7 @@ static int enable_slot (struct hotplug_slot *hotplug_slot) { struct slot *slot = get_slot(hotplug_slot); - dbg("%s - physical_slot = %s\n", __func__, hotplug_slot->name); + dbg("%s - physical_slot = %s\n", __func__, slot_name(slot)); return shpchp_sysfs_enable_slot(slot); } @@ -222,7 +208,7 @@ static int disable_slot (struct hotplug_slot *hotplug_slot) { struct slot *slot = get_slot(hotplug_slot); - dbg("%s - physical_slot = %s\n", __func__, hotplug_slot->name); + dbg("%s - physical_slot = %s\n", __func__, slot_name(slot)); return shpchp_sysfs_disable_slot(slot); } @@ -232,7 +218,7 @@ static int get_power_status (struct hotplug_slot *hotplug_slot, u8 *value) struct slot *slot = get_slot(hotplug_slot); int retval; - dbg("%s - physical_slot = %s\n", __func__, hotplug_slot->name); + dbg("%s - physical_slot = %s\n", __func__, slot_name(slot)); retval = slot->hpc_ops->get_power_status(slot, value); if (retval < 0) @@ -246,7 +232,7 @@ static int get_attention_status (struct hotplug_slot *hotplug_slot, u8 *value) struct slot *slot = get_slot(hotplug_slot); int retval; - dbg("%s - physical_slot = %s\n", __func__, hotplug_slot->name); + dbg("%s - physical_slot = %s\n", __func__, slot_name(slot)); retval = slot->hpc_ops->get_attention_status(slot, value); if (retval < 0) @@ -260,7 +246,7 @@ static int get_latch_status (struct hotplug_slot *hotplug_slot, u8 *value) struct slot *slot = get_slot(hotplug_slot); int retval; - dbg("%s - physical_slot = %s\n", __func__, hotplug_slot->name); + dbg("%s - physical_slot = %s\n", __func__, slot_name(slot)); retval = slot->hpc_ops->get_latch_status(slot, value); if (retval < 0) @@ -274,7 +260,7 @@ static int get_adapter_status (struct hotplug_slot *hotplug_slot, u8 *value) struct slot *slot = get_slot(hotplug_slot); int retval; - dbg("%s - physical_slot = %s\n", __func__, hotplug_slot->name); + dbg("%s - physical_slot = %s\n", __func__, slot_name(slot)); retval = slot->hpc_ops->get_adapter_status(slot, value); if (retval < 0) @@ -289,7 +275,7 @@ static int get_max_bus_speed(struct hotplug_slot *hotplug_slot, struct slot *slot = get_slot(hotplug_slot); int retval; - dbg("%s - physical_slot = %s\n", __func__, hotplug_slot->name); + dbg("%s - physical_slot = %s\n", __func__, slot_name(slot)); retval = slot->hpc_ops->get_max_bus_speed(slot, value); if (retval < 0) @@ -303,7 +289,7 @@ static int get_cur_bus_speed (struct hotplug_slot *hotplug_slot, enum pci_bus_sp struct slot *slot = get_slot(hotplug_slot); int retval; - dbg("%s - physical_slot = %s\n", __func__, hotplug_slot->name); + dbg("%s - physical_slot = %s\n", __func__, slot_name(slot)); retval = slot->hpc_ops->get_cur_bus_speed(slot, value); if (retval < 0) diff --git a/drivers/pci/hotplug/shpchp_ctrl.c b/drivers/pci/hotplug/shpchp_ctrl.c index dfb53932dfbc..919b1ee44313 100644 --- a/drivers/pci/hotplug/shpchp_ctrl.c +++ b/drivers/pci/hotplug/shpchp_ctrl.c @@ -70,7 +70,7 @@ u8 shpchp_handle_attention_button(u8 hp_slot, struct controller *ctrl) /* * Button pressed - See if need to TAKE ACTION!!! */ - info("Button pressed on Slot(%s)\n", p_slot->name); + info("Button pressed on Slot(%s)\n", slot_name(p_slot)); event_type = INT_BUTTON_PRESS; queue_interrupt_event(p_slot, event_type); @@ -98,7 +98,7 @@ u8 shpchp_handle_switch_change(u8 hp_slot, struct controller *ctrl) /* * Switch opened */ - info("Latch open on Slot(%s)\n", p_slot->name); + info("Latch open on Slot(%s)\n", slot_name(p_slot)); event_type = INT_SWITCH_OPEN; if (p_slot->pwr_save && p_slot->presence_save) { event_type = INT_POWER_FAULT; @@ -108,7 +108,7 @@ u8 shpchp_handle_switch_change(u8 hp_slot, struct controller *ctrl) /* * Switch closed */ - info("Latch close on Slot(%s)\n", p_slot->name); + info("Latch close on Slot(%s)\n", slot_name(p_slot)); event_type = INT_SWITCH_CLOSE; } @@ -135,13 +135,13 @@ u8 shpchp_handle_presence_change(u8 hp_slot, struct controller *ctrl) /* * Card Present */ - info("Card present on Slot(%s)\n", p_slot->name); + info("Card present on Slot(%s)\n", slot_name(p_slot)); event_type = INT_PRESENCE_ON; } else { /* * Not Present */ - info("Card not present on Slot(%s)\n", p_slot->name); + info("Card not present on Slot(%s)\n", slot_name(p_slot)); event_type = INT_PRESENCE_OFF; } @@ -164,14 +164,14 @@ u8 shpchp_handle_power_fault(u8 hp_slot, struct controller *ctrl) /* * Power fault Cleared */ - info("Power fault cleared on Slot(%s)\n", p_slot->name); + info("Power fault cleared on Slot(%s)\n", slot_name(p_slot)); p_slot->status = 0x00; event_type = INT_POWER_FAULT_CLEAR; } else { /* * Power fault */ - info("Power fault on Slot(%s)\n", p_slot->name); + info("Power fault on Slot(%s)\n", slot_name(p_slot)); event_type = INT_POWER_FAULT; /* set power fault status for this board */ p_slot->status = 0xFF; @@ -493,11 +493,11 @@ static void handle_button_press_event(struct slot *p_slot) if (getstatus) { p_slot->state = BLINKINGOFF_STATE; info("PCI slot #%s - powering off due to button " - "press.\n", p_slot->name); + "press.\n", slot_name(p_slot)); } else { p_slot->state = BLINKINGON_STATE; info("PCI slot #%s - powering on due to button " - "press.\n", p_slot->name); + "press.\n", slot_name(p_slot)); } /* blink green LED and turn off amber */ p_slot->hpc_ops->green_led_blink(p_slot); @@ -512,7 +512,7 @@ static void handle_button_press_event(struct slot *p_slot) * press the attention again before the 5 sec. limit * expires to cancel hot-add or hot-remove */ - info("Button cancel on Slot(%s)\n", p_slot->name); + info("Button cancel on Slot(%s)\n", slot_name(p_slot)); dbg("%s: button cancel\n", __func__); cancel_delayed_work(&p_slot->work); if (p_slot->state == BLINKINGOFF_STATE) @@ -521,7 +521,7 @@ static void handle_button_press_event(struct slot *p_slot) p_slot->hpc_ops->green_led_off(p_slot); p_slot->hpc_ops->set_attention_status(p_slot, 0); info("PCI slot #%s - action canceled due to button press\n", - p_slot->name); + slot_name(p_slot)); p_slot->state = STATIC_STATE; break; case POWEROFF_STATE: @@ -531,7 +531,7 @@ static void handle_button_press_event(struct slot *p_slot) * this means that the previous attention button action * to hot-add or hot-remove is undergoing */ - info("Button ignore on Slot(%s)\n", p_slot->name); + info("Button ignore on Slot(%s)\n", slot_name(p_slot)); update_slot_info(p_slot); break; default: @@ -574,17 +574,17 @@ static int shpchp_enable_slot (struct slot *p_slot) mutex_lock(&p_slot->ctrl->crit_sect); rc = p_slot->hpc_ops->get_adapter_status(p_slot, &getstatus); if (rc || !getstatus) { - info("No adapter on slot(%s)\n", p_slot->name); + info("No adapter on slot(%s)\n", slot_name(p_slot)); goto out; } rc = p_slot->hpc_ops->get_latch_status(p_slot, &getstatus); if (rc || getstatus) { - info("Latch open on slot(%s)\n", p_slot->name); + info("Latch open on slot(%s)\n", slot_name(p_slot)); goto out; } rc = p_slot->hpc_ops->get_power_status(p_slot, &getstatus); if (rc || getstatus) { - info("Already enabled on slot(%s)\n", p_slot->name); + info("Already enabled on slot(%s)\n", slot_name(p_slot)); goto out; } @@ -633,17 +633,17 @@ static int shpchp_disable_slot (struct slot *p_slot) rc = p_slot->hpc_ops->get_adapter_status(p_slot, &getstatus); if (rc || !getstatus) { - info("No adapter on slot(%s)\n", p_slot->name); + info("No adapter on slot(%s)\n", slot_name(p_slot)); goto out; } rc = p_slot->hpc_ops->get_latch_status(p_slot, &getstatus); if (rc || getstatus) { - info("Latch open on slot(%s)\n", p_slot->name); + info("Latch open on slot(%s)\n", slot_name(p_slot)); goto out; } rc = p_slot->hpc_ops->get_power_status(p_slot, &getstatus); if (rc || !getstatus) { - info("Already disabled slot(%s)\n", p_slot->name); + info("Already disabled slot(%s)\n", slot_name(p_slot)); goto out; } @@ -671,14 +671,14 @@ int shpchp_sysfs_enable_slot(struct slot *p_slot) break; case POWERON_STATE: info("Slot %s is already in powering on state\n", - p_slot->name); + slot_name(p_slot)); break; case BLINKINGOFF_STATE: case POWEROFF_STATE: - info("Already enabled on slot %s\n", p_slot->name); + info("Already enabled on slot %s\n", slot_name(p_slot)); break; default: - err("Not a valid state on slot %s\n", p_slot->name); + err("Not a valid state on slot %s\n", slot_name(p_slot)); break; } mutex_unlock(&p_slot->lock); @@ -703,14 +703,14 @@ int shpchp_sysfs_disable_slot(struct slot *p_slot) break; case POWEROFF_STATE: info("Slot %s is already in powering off state\n", - p_slot->name); + slot_name(p_slot)); break; case BLINKINGON_STATE: case POWERON_STATE: - info("Already disabled on slot %s\n", p_slot->name); + info("Already disabled on slot %s\n", slot_name(p_slot)); break; default: - err("Not a valid state on slot %s\n", p_slot->name); + err("Not a valid state on slot %s\n", slot_name(p_slot)); break; } mutex_unlock(&p_slot->lock); diff --git a/drivers/pci/intel-iommu.c b/drivers/pci/intel-iommu.c index 8b51e10b7783..a2692724b68f 100644 --- a/drivers/pci/intel-iommu.c +++ b/drivers/pci/intel-iommu.c @@ -18,6 +18,7 @@ * Author: Ashok Raj <ashok.raj@intel.com> * Author: Shaohua Li <shaohua.li@intel.com> * Author: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> + * Author: Fenghua Yu <fenghua.yu@intel.com> */ #include <linux/init.h> @@ -35,11 +36,13 @@ #include <linux/timer.h> #include <linux/iova.h> #include <linux/intel-iommu.h> -#include <asm/proto.h> /* force_iommu in this header in x86-64*/ #include <asm/cacheflush.h> #include <asm/iommu.h> #include "pci.h" +#define ROOT_SIZE VTD_PAGE_SIZE +#define CONTEXT_SIZE VTD_PAGE_SIZE + #define IS_GFX_DEVICE(pdev) ((pdev->class >> 16) == PCI_BASE_CLASS_DISPLAY) #define IS_ISA_DEVICE(pdev) ((pdev->class >> 8) == PCI_CLASS_BRIDGE_ISA) @@ -199,7 +202,7 @@ static struct context_entry * device_to_context_entry(struct intel_iommu *iommu, spin_unlock_irqrestore(&iommu->lock, flags); return NULL; } - __iommu_flush_cache(iommu, (void *)context, PAGE_SIZE_4K); + __iommu_flush_cache(iommu, (void *)context, CONTEXT_SIZE); phy_addr = virt_to_phys((void *)context); set_root_value(root, phy_addr); set_root_present(root); @@ -345,7 +348,7 @@ static struct dma_pte * addr_to_dma_pte(struct dmar_domain *domain, u64 addr) return NULL; } __iommu_flush_cache(domain->iommu, tmp_page, - PAGE_SIZE_4K); + PAGE_SIZE); dma_set_pte_addr(*pte, virt_to_phys(tmp_page)); /* * high level table always sets r/w, last level page @@ -408,13 +411,13 @@ static void dma_pte_clear_range(struct dmar_domain *domain, u64 start, u64 end) start &= (((u64)1) << addr_width) - 1; end &= (((u64)1) << addr_width) - 1; /* in case it's partial page */ - start = PAGE_ALIGN_4K(start); - end &= PAGE_MASK_4K; + start = PAGE_ALIGN(start); + end &= PAGE_MASK; /* we don't need lock here, nobody else touches the iova range */ while (start < end) { dma_pte_clear_one(domain, start); - start += PAGE_SIZE_4K; + start += VTD_PAGE_SIZE; } } @@ -468,7 +471,7 @@ static int iommu_alloc_root_entry(struct intel_iommu *iommu) if (!root) return -ENOMEM; - __iommu_flush_cache(iommu, root, PAGE_SIZE_4K); + __iommu_flush_cache(iommu, root, ROOT_SIZE); spin_lock_irqsave(&iommu->lock, flags); iommu->root_entry = root; @@ -567,27 +570,6 @@ static int __iommu_flush_context(struct intel_iommu *iommu, return 0; } -static int inline iommu_flush_context_global(struct intel_iommu *iommu, - int non_present_entry_flush) -{ - return __iommu_flush_context(iommu, 0, 0, 0, DMA_CCMD_GLOBAL_INVL, - non_present_entry_flush); -} - -static int inline iommu_flush_context_domain(struct intel_iommu *iommu, u16 did, - int non_present_entry_flush) -{ - return __iommu_flush_context(iommu, did, 0, 0, DMA_CCMD_DOMAIN_INVL, - non_present_entry_flush); -} - -static int inline iommu_flush_context_device(struct intel_iommu *iommu, - u16 did, u16 source_id, u8 function_mask, int non_present_entry_flush) -{ - return __iommu_flush_context(iommu, did, source_id, function_mask, - DMA_CCMD_DEVICE_INVL, non_present_entry_flush); -} - /* return value determine if we need a write buffer flush */ static int __iommu_flush_iotlb(struct intel_iommu *iommu, u16 did, u64 addr, unsigned int size_order, u64 type, @@ -655,37 +637,25 @@ static int __iommu_flush_iotlb(struct intel_iommu *iommu, u16 did, printk(KERN_ERR"IOMMU: flush IOTLB failed\n"); if (DMA_TLB_IAIG(val) != DMA_TLB_IIRG(type)) pr_debug("IOMMU: tlb flush request %Lx, actual %Lx\n", - DMA_TLB_IIRG(type), DMA_TLB_IAIG(val)); + (unsigned long long)DMA_TLB_IIRG(type), + (unsigned long long)DMA_TLB_IAIG(val)); /* flush iotlb entry will implicitly flush write buffer */ return 0; } -static int inline iommu_flush_iotlb_global(struct intel_iommu *iommu, - int non_present_entry_flush) -{ - return __iommu_flush_iotlb(iommu, 0, 0, 0, DMA_TLB_GLOBAL_FLUSH, - non_present_entry_flush); -} - -static int inline iommu_flush_iotlb_dsi(struct intel_iommu *iommu, u16 did, - int non_present_entry_flush) -{ - return __iommu_flush_iotlb(iommu, did, 0, 0, DMA_TLB_DSI_FLUSH, - non_present_entry_flush); -} - static int iommu_flush_iotlb_psi(struct intel_iommu *iommu, u16 did, u64 addr, unsigned int pages, int non_present_entry_flush) { unsigned int mask; - BUG_ON(addr & (~PAGE_MASK_4K)); + BUG_ON(addr & (~VTD_PAGE_MASK)); BUG_ON(pages == 0); /* Fallback to domain selective flush if no PSI support */ if (!cap_pgsel_inv(iommu->cap)) - return iommu_flush_iotlb_dsi(iommu, did, - non_present_entry_flush); + return iommu->flush.flush_iotlb(iommu, did, 0, 0, + DMA_TLB_DSI_FLUSH, + non_present_entry_flush); /* * PSI requires page size to be 2 ^ x, and the base address is naturally @@ -694,11 +664,12 @@ static int iommu_flush_iotlb_psi(struct intel_iommu *iommu, u16 did, mask = ilog2(__roundup_pow_of_two(pages)); /* Fallback to domain selective flush if size is too big */ if (mask > cap_max_amask_val(iommu->cap)) - return iommu_flush_iotlb_dsi(iommu, did, - non_present_entry_flush); + return iommu->flush.flush_iotlb(iommu, did, 0, 0, + DMA_TLB_DSI_FLUSH, non_present_entry_flush); - return __iommu_flush_iotlb(iommu, did, addr, mask, - DMA_TLB_PSI_FLUSH, non_present_entry_flush); + return iommu->flush.flush_iotlb(iommu, did, addr, mask, + DMA_TLB_PSI_FLUSH, + non_present_entry_flush); } static void iommu_disable_protect_mem_regions(struct intel_iommu *iommu) @@ -831,7 +802,7 @@ void dmar_msi_read(int irq, struct msi_msg *msg) } static int iommu_page_fault_do_one(struct intel_iommu *iommu, int type, - u8 fault_reason, u16 source_id, u64 addr) + u8 fault_reason, u16 source_id, unsigned long long addr) { const char *reason; @@ -1084,9 +1055,9 @@ static void dmar_init_reserved_ranges(void) if (!r->flags || !(r->flags & IORESOURCE_MEM)) continue; addr = r->start; - addr &= PAGE_MASK_4K; + addr &= PAGE_MASK; size = r->end - addr; - size = PAGE_ALIGN_4K(size); + size = PAGE_ALIGN(size); iova = reserve_iova(&reserved_iova_list, IOVA_PFN(addr), IOVA_PFN(size + addr) - 1); if (!iova) @@ -1148,7 +1119,7 @@ static int domain_init(struct dmar_domain *domain, int guest_width) domain->pgd = (struct dma_pte *)alloc_pgtable_page(); if (!domain->pgd) return -ENOMEM; - __iommu_flush_cache(iommu, domain->pgd, PAGE_SIZE_4K); + __iommu_flush_cache(iommu, domain->pgd, PAGE_SIZE); return 0; } @@ -1164,7 +1135,7 @@ static void domain_exit(struct dmar_domain *domain) /* destroy iovas */ put_iova_domain(&domain->iovad); end = DOMAIN_MAX_ADDR(domain->gaw); - end = end & (~PAGE_MASK_4K); + end = end & (~PAGE_MASK); /* clear ptes */ dma_pte_clear_range(domain, 0, end); @@ -1204,11 +1175,13 @@ static int domain_context_mapping_one(struct dmar_domain *domain, __iommu_flush_cache(iommu, context, sizeof(*context)); /* it's a non-present to present mapping */ - if (iommu_flush_context_device(iommu, domain->id, - (((u16)bus) << 8) | devfn, DMA_CCMD_MASK_NOBIT, 1)) + if (iommu->flush.flush_context(iommu, domain->id, + (((u16)bus) << 8) | devfn, DMA_CCMD_MASK_NOBIT, + DMA_CCMD_DEVICE_INVL, 1)) iommu_flush_write_buffer(iommu); else - iommu_flush_iotlb_dsi(iommu, 0, 0); + iommu->flush.flush_iotlb(iommu, 0, 0, 0, DMA_TLB_DSI_FLUSH, 0); + spin_unlock_irqrestore(&iommu->lock, flags); return 0; } @@ -1283,22 +1256,25 @@ domain_page_mapping(struct dmar_domain *domain, dma_addr_t iova, u64 start_pfn, end_pfn; struct dma_pte *pte; int index; + int addr_width = agaw_to_width(domain->agaw); + + hpa &= (((u64)1) << addr_width) - 1; if ((prot & (DMA_PTE_READ|DMA_PTE_WRITE)) == 0) return -EINVAL; - iova &= PAGE_MASK_4K; - start_pfn = ((u64)hpa) >> PAGE_SHIFT_4K; - end_pfn = (PAGE_ALIGN_4K(((u64)hpa) + size)) >> PAGE_SHIFT_4K; + iova &= PAGE_MASK; + start_pfn = ((u64)hpa) >> VTD_PAGE_SHIFT; + end_pfn = (VTD_PAGE_ALIGN(((u64)hpa) + size)) >> VTD_PAGE_SHIFT; index = 0; while (start_pfn < end_pfn) { - pte = addr_to_dma_pte(domain, iova + PAGE_SIZE_4K * index); + pte = addr_to_dma_pte(domain, iova + VTD_PAGE_SIZE * index); if (!pte) return -ENOMEM; /* We don't need lock here, nobody else * touches the iova range */ BUG_ON(dma_pte_addr(*pte)); - dma_set_pte_addr(*pte, start_pfn << PAGE_SHIFT_4K); + dma_set_pte_addr(*pte, start_pfn << VTD_PAGE_SHIFT); dma_set_pte_prot(*pte, prot); __iommu_flush_cache(domain->iommu, pte, sizeof(*pte)); start_pfn++; @@ -1310,8 +1286,10 @@ domain_page_mapping(struct dmar_domain *domain, dma_addr_t iova, static void detach_domain_for_dev(struct dmar_domain *domain, u8 bus, u8 devfn) { clear_context_table(domain->iommu, bus, devfn); - iommu_flush_context_global(domain->iommu, 0); - iommu_flush_iotlb_global(domain->iommu, 0); + domain->iommu->flush.flush_context(domain->iommu, 0, 0, 0, + DMA_CCMD_GLOBAL_INVL, 0); + domain->iommu->flush.flush_iotlb(domain->iommu, 0, 0, 0, + DMA_TLB_GLOBAL_FLUSH, 0); } static void domain_remove_dev_info(struct dmar_domain *domain) @@ -1474,11 +1452,13 @@ error: return find_domain(pdev); } -static int iommu_prepare_identity_map(struct pci_dev *pdev, u64 start, u64 end) +static int iommu_prepare_identity_map(struct pci_dev *pdev, + unsigned long long start, + unsigned long long end) { struct dmar_domain *domain; unsigned long size; - u64 base; + unsigned long long base; int ret; printk(KERN_INFO @@ -1490,9 +1470,9 @@ static int iommu_prepare_identity_map(struct pci_dev *pdev, u64 start, u64 end) return -ENOMEM; /* The address might not be aligned */ - base = start & PAGE_MASK_4K; + base = start & PAGE_MASK; size = end - base; - size = PAGE_ALIGN_4K(size); + size = PAGE_ALIGN(size); if (!reserve_iova(&domain->iovad, IOVA_PFN(base), IOVA_PFN(base + size) - 1)) { printk(KERN_ERR "IOMMU: reserve iova failed\n"); @@ -1662,6 +1642,28 @@ int __init init_dmars(void) } } + for_each_drhd_unit(drhd) { + if (drhd->ignored) + continue; + + iommu = drhd->iommu; + if (dmar_enable_qi(iommu)) { + /* + * Queued Invalidate not enabled, use Register Based + * Invalidate + */ + iommu->flush.flush_context = __iommu_flush_context; + iommu->flush.flush_iotlb = __iommu_flush_iotlb; + printk(KERN_INFO "IOMMU 0x%Lx: using Register based " + "invalidation\n", drhd->reg_base_addr); + } else { + iommu->flush.flush_context = qi_flush_context; + iommu->flush.flush_iotlb = qi_flush_iotlb; + printk(KERN_INFO "IOMMU 0x%Lx: using Queued " + "invalidation\n", drhd->reg_base_addr); + } + } + /* * For each rmrr * for each dev attached to rmrr @@ -1714,9 +1716,10 @@ int __init init_dmars(void) iommu_set_root_entry(iommu); - iommu_flush_context_global(iommu, 0); - iommu_flush_iotlb_global(iommu, 0); - + iommu->flush.flush_context(iommu, 0, 0, 0, DMA_CCMD_GLOBAL_INVL, + 0); + iommu->flush.flush_iotlb(iommu, 0, 0, 0, DMA_TLB_GLOBAL_FLUSH, + 0); iommu_disable_protect_mem_regions(iommu); ret = iommu_enable_translation(iommu); @@ -1738,8 +1741,8 @@ error: static inline u64 aligned_size(u64 host_addr, size_t size) { u64 addr; - addr = (host_addr & (~PAGE_MASK_4K)) + size; - return PAGE_ALIGN_4K(addr); + addr = (host_addr & (~PAGE_MASK)) + size; + return PAGE_ALIGN(addr); } struct iova * @@ -1753,20 +1756,20 @@ iommu_alloc_iova(struct dmar_domain *domain, size_t size, u64 end) return NULL; piova = alloc_iova(&domain->iovad, - size >> PAGE_SHIFT_4K, IOVA_PFN(end), 1); + size >> PAGE_SHIFT, IOVA_PFN(end), 1); return piova; } static struct iova * __intel_alloc_iova(struct device *dev, struct dmar_domain *domain, - size_t size) + size_t size, u64 dma_mask) { struct pci_dev *pdev = to_pci_dev(dev); struct iova *iova = NULL; - if ((pdev->dma_mask <= DMA_32BIT_MASK) || (dmar_forcedac)) { - iova = iommu_alloc_iova(domain, size, pdev->dma_mask); - } else { + if (dma_mask <= DMA_32BIT_MASK || dmar_forcedac) + iova = iommu_alloc_iova(domain, size, dma_mask); + else { /* * First try to allocate an io virtual address in * DMA_32BIT_MASK and if that fails then try allocating @@ -1774,7 +1777,7 @@ __intel_alloc_iova(struct device *dev, struct dmar_domain *domain, */ iova = iommu_alloc_iova(domain, size, DMA_32BIT_MASK); if (!iova) - iova = iommu_alloc_iova(domain, size, pdev->dma_mask); + iova = iommu_alloc_iova(domain, size, dma_mask); } if (!iova) { @@ -1813,12 +1816,12 @@ get_valid_domain_for_dev(struct pci_dev *pdev) return domain; } -static dma_addr_t -intel_map_single(struct device *hwdev, phys_addr_t paddr, size_t size, int dir) +static dma_addr_t __intel_map_single(struct device *hwdev, phys_addr_t paddr, + size_t size, int dir, u64 dma_mask) { struct pci_dev *pdev = to_pci_dev(hwdev); struct dmar_domain *domain; - unsigned long start_paddr; + phys_addr_t start_paddr; struct iova *iova; int prot = 0; int ret; @@ -1833,11 +1836,11 @@ intel_map_single(struct device *hwdev, phys_addr_t paddr, size_t size, int dir) size = aligned_size((u64)paddr, size); - iova = __intel_alloc_iova(hwdev, domain, size); + iova = __intel_alloc_iova(hwdev, domain, size, pdev->dma_mask); if (!iova) goto error; - start_paddr = iova->pfn_lo << PAGE_SHIFT_4K; + start_paddr = (phys_addr_t)iova->pfn_lo << PAGE_SHIFT; /* * Check if DMAR supports zero-length reads on write only @@ -1855,30 +1858,33 @@ intel_map_single(struct device *hwdev, phys_addr_t paddr, size_t size, int dir) * is not a big problem */ ret = domain_page_mapping(domain, start_paddr, - ((u64)paddr) & PAGE_MASK_4K, size, prot); + ((u64)paddr) & PAGE_MASK, size, prot); if (ret) goto error; - pr_debug("Device %s request: %lx@%llx mapping: %lx@%llx, dir %d\n", - pci_name(pdev), size, (u64)paddr, - size, (u64)start_paddr, dir); - /* it's a non-present to present mapping */ ret = iommu_flush_iotlb_psi(domain->iommu, domain->id, - start_paddr, size >> PAGE_SHIFT_4K, 1); + start_paddr, size >> VTD_PAGE_SHIFT, 1); if (ret) iommu_flush_write_buffer(domain->iommu); - return (start_paddr + ((u64)paddr & (~PAGE_MASK_4K))); + return start_paddr + ((u64)paddr & (~PAGE_MASK)); error: if (iova) __free_iova(&domain->iovad, iova); printk(KERN_ERR"Device %s request: %lx@%llx dir %d --- failed\n", - pci_name(pdev), size, (u64)paddr, dir); + pci_name(pdev), size, (unsigned long long)paddr, dir); return 0; } +dma_addr_t intel_map_single(struct device *hwdev, phys_addr_t paddr, + size_t size, int dir) +{ + return __intel_map_single(hwdev, paddr, size, dir, + to_pci_dev(hwdev)->dma_mask); +} + static void flush_unmaps(void) { int i, j; @@ -1891,7 +1897,8 @@ static void flush_unmaps(void) struct intel_iommu *iommu = deferred_flush[i].domain[0]->iommu; - iommu_flush_iotlb_global(iommu, 0); + iommu->flush.flush_iotlb(iommu, 0, 0, 0, + DMA_TLB_GLOBAL_FLUSH, 0); for (j = 0; j < deferred_flush[i].next; j++) { __free_iova(&deferred_flush[i].domain[j]->iovad, deferred_flush[i].iova[j]); @@ -1936,8 +1943,8 @@ static void add_unmap(struct dmar_domain *dom, struct iova *iova) spin_unlock_irqrestore(&async_umap_flush_lock, flags); } -static void intel_unmap_single(struct device *dev, dma_addr_t dev_addr, - size_t size, int dir) +void intel_unmap_single(struct device *dev, dma_addr_t dev_addr, size_t size, + int dir) { struct pci_dev *pdev = to_pci_dev(dev); struct dmar_domain *domain; @@ -1953,11 +1960,11 @@ static void intel_unmap_single(struct device *dev, dma_addr_t dev_addr, if (!iova) return; - start_addr = iova->pfn_lo << PAGE_SHIFT_4K; + start_addr = iova->pfn_lo << PAGE_SHIFT; size = aligned_size((u64)dev_addr, size); pr_debug("Device %s unmapping: %lx@%llx\n", - pci_name(pdev), size, (u64)start_addr); + pci_name(pdev), size, (unsigned long long)start_addr); /* clear the whole page */ dma_pte_clear_range(domain, start_addr, start_addr + size); @@ -1965,7 +1972,7 @@ static void intel_unmap_single(struct device *dev, dma_addr_t dev_addr, dma_pte_free_pagetable(domain, start_addr, start_addr + size); if (intel_iommu_strict) { if (iommu_flush_iotlb_psi(domain->iommu, - domain->id, start_addr, size >> PAGE_SHIFT_4K, 0)) + domain->id, start_addr, size >> VTD_PAGE_SHIFT, 0)) iommu_flush_write_buffer(domain->iommu); /* free iova */ __free_iova(&domain->iovad, iova); @@ -1978,13 +1985,13 @@ static void intel_unmap_single(struct device *dev, dma_addr_t dev_addr, } } -static void * intel_alloc_coherent(struct device *hwdev, size_t size, - dma_addr_t *dma_handle, gfp_t flags) +void *intel_alloc_coherent(struct device *hwdev, size_t size, + dma_addr_t *dma_handle, gfp_t flags) { void *vaddr; int order; - size = PAGE_ALIGN_4K(size); + size = PAGE_ALIGN(size); order = get_order(size); flags &= ~(GFP_DMA | GFP_DMA32); @@ -1993,19 +2000,21 @@ static void * intel_alloc_coherent(struct device *hwdev, size_t size, return NULL; memset(vaddr, 0, size); - *dma_handle = intel_map_single(hwdev, virt_to_bus(vaddr), size, DMA_BIDIRECTIONAL); + *dma_handle = __intel_map_single(hwdev, virt_to_bus(vaddr), size, + DMA_BIDIRECTIONAL, + hwdev->coherent_dma_mask); if (*dma_handle) return vaddr; free_pages((unsigned long)vaddr, order); return NULL; } -static void intel_free_coherent(struct device *hwdev, size_t size, - void *vaddr, dma_addr_t dma_handle) +void intel_free_coherent(struct device *hwdev, size_t size, void *vaddr, + dma_addr_t dma_handle) { int order; - size = PAGE_ALIGN_4K(size); + size = PAGE_ALIGN(size); order = get_order(size); intel_unmap_single(hwdev, dma_handle, size, DMA_BIDIRECTIONAL); @@ -2013,8 +2022,9 @@ static void intel_free_coherent(struct device *hwdev, size_t size, } #define SG_ENT_VIRT_ADDRESS(sg) (sg_virt((sg))) -static void intel_unmap_sg(struct device *hwdev, struct scatterlist *sglist, - int nelems, int dir) + +void intel_unmap_sg(struct device *hwdev, struct scatterlist *sglist, + int nelems, int dir) { int i; struct pci_dev *pdev = to_pci_dev(hwdev); @@ -2038,7 +2048,7 @@ static void intel_unmap_sg(struct device *hwdev, struct scatterlist *sglist, size += aligned_size((u64)addr, sg->length); } - start_addr = iova->pfn_lo << PAGE_SHIFT_4K; + start_addr = iova->pfn_lo << PAGE_SHIFT; /* clear the whole page */ dma_pte_clear_range(domain, start_addr, start_addr + size); @@ -2046,7 +2056,7 @@ static void intel_unmap_sg(struct device *hwdev, struct scatterlist *sglist, dma_pte_free_pagetable(domain, start_addr, start_addr + size); if (iommu_flush_iotlb_psi(domain->iommu, domain->id, start_addr, - size >> PAGE_SHIFT_4K, 0)) + size >> VTD_PAGE_SHIFT, 0)) iommu_flush_write_buffer(domain->iommu); /* free iova */ @@ -2067,8 +2077,8 @@ static int intel_nontranslate_map_sg(struct device *hddev, return nelems; } -static int intel_map_sg(struct device *hwdev, struct scatterlist *sglist, - int nelems, int dir) +int intel_map_sg(struct device *hwdev, struct scatterlist *sglist, int nelems, + int dir) { void *addr; int i; @@ -2096,7 +2106,7 @@ static int intel_map_sg(struct device *hwdev, struct scatterlist *sglist, size += aligned_size((u64)addr, sg->length); } - iova = __intel_alloc_iova(hwdev, domain, size); + iova = __intel_alloc_iova(hwdev, domain, size, pdev->dma_mask); if (!iova) { sglist->dma_length = 0; return 0; @@ -2112,14 +2122,14 @@ static int intel_map_sg(struct device *hwdev, struct scatterlist *sglist, if (dir == DMA_FROM_DEVICE || dir == DMA_BIDIRECTIONAL) prot |= DMA_PTE_WRITE; - start_addr = iova->pfn_lo << PAGE_SHIFT_4K; + start_addr = iova->pfn_lo << PAGE_SHIFT; offset = 0; for_each_sg(sglist, sg, nelems, i) { addr = SG_ENT_VIRT_ADDRESS(sg); addr = (void *)virt_to_phys(addr); size = aligned_size((u64)addr, sg->length); ret = domain_page_mapping(domain, start_addr + offset, - ((u64)addr) & PAGE_MASK_4K, + ((u64)addr) & PAGE_MASK, size, prot); if (ret) { /* clear the page */ @@ -2133,14 +2143,14 @@ static int intel_map_sg(struct device *hwdev, struct scatterlist *sglist, return 0; } sg->dma_address = start_addr + offset + - ((u64)addr & (~PAGE_MASK_4K)); + ((u64)addr & (~PAGE_MASK)); sg->dma_length = sg->length; offset += size; } /* it's a non-present to present mapping */ if (iommu_flush_iotlb_psi(domain->iommu, domain->id, - start_addr, offset >> PAGE_SHIFT_4K, 1)) + start_addr, offset >> VTD_PAGE_SHIFT, 1)) iommu_flush_write_buffer(domain->iommu); return nelems; } @@ -2180,7 +2190,6 @@ static inline int iommu_devinfo_cache_init(void) sizeof(struct device_domain_info), 0, SLAB_HWCACHE_ALIGN, - NULL); if (!iommu_devinfo_cache) { printk(KERN_ERR "Couldn't create devinfo cache\n"); @@ -2198,7 +2207,6 @@ static inline int iommu_iova_cache_init(void) sizeof(struct iova), 0, SLAB_HWCACHE_ALIGN, - NULL); if (!iommu_iova_cache) { printk(KERN_ERR "Couldn't create iova cache\n"); @@ -2327,7 +2335,7 @@ void intel_iommu_domain_exit(struct dmar_domain *domain) return; end = DOMAIN_MAX_ADDR(domain->gaw); - end = end & (~PAGE_MASK_4K); + end = end & (~VTD_PAGE_MASK); /* clear ptes */ dma_pte_clear_range(domain, 0, end); @@ -2423,6 +2431,6 @@ u64 intel_iommu_iova_to_pfn(struct dmar_domain *domain, u64 iova) if (pte) pfn = dma_pte_addr(*pte); - return pfn >> PAGE_SHIFT_4K; + return pfn >> VTD_PAGE_SHIFT; } EXPORT_SYMBOL_GPL(intel_iommu_iova_to_pfn); diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c index d2812013fd22..74801f7df9c9 100644 --- a/drivers/pci/msi.c +++ b/drivers/pci/msi.c @@ -759,3 +759,24 @@ void pci_msi_init_pci_dev(struct pci_dev *dev) { INIT_LIST_HEAD(&dev->msi_list); } + +#ifdef CONFIG_ACPI +#include <linux/acpi.h> +#include <linux/pci-acpi.h> +static void __devinit msi_acpi_init(void) +{ + if (acpi_pci_disabled) + return; + pci_osc_support_set(OSC_MSI_SUPPORT); + pcie_osc_support_set(OSC_MSI_SUPPORT); +} +#else +static inline void msi_acpi_init(void) { } +#endif /* CONFIG_ACPI */ + +void __devinit msi_init(void) +{ + if (!pci_msi_enable) + return; + msi_acpi_init(); +} diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c index 89a2f0fa10f9..dfe7c8e1b185 100644 --- a/drivers/pci/pci-acpi.c +++ b/drivers/pci/pci-acpi.c @@ -24,17 +24,17 @@ struct acpi_osc_data { acpi_handle handle; u32 support_set; u32 control_set; - int is_queried; - u32 query_result; struct list_head sibiling; }; static LIST_HEAD(acpi_osc_data_list); struct acpi_osc_args { u32 capbuf[3]; - u32 query_result; + u32 ctrl_result; }; +static DEFINE_MUTEX(pci_acpi_lock); + static struct acpi_osc_data *acpi_get_osc_data(acpi_handle handle) { struct acpi_osc_data *data; @@ -108,9 +108,8 @@ static acpi_status acpi_run_osc(acpi_handle handle, goto out_kfree; } out_success: - if (flags & OSC_QUERY_ENABLE) - osc_args->query_result = - *((u32 *)(out_obj->buffer.pointer + 8)); + osc_args->ctrl_result = + *((u32 *)(out_obj->buffer.pointer + 8)); status = AE_OK; out_kfree: @@ -118,41 +117,53 @@ out_kfree: return status; } -static acpi_status acpi_query_osc(acpi_handle handle, - u32 level, void *context, void **retval) +static acpi_status __acpi_query_osc(u32 flags, struct acpi_osc_data *osc_data, + u32 *result) { acpi_status status; - struct acpi_osc_data *osc_data; - u32 flags = (unsigned long)context, support_set; - acpi_handle tmp; + u32 support_set; struct acpi_osc_args osc_args; - status = acpi_get_handle(handle, "_OSC", &tmp); - if (ACPI_FAILURE(status)) - return status; - - osc_data = acpi_get_osc_data(handle); - if (!osc_data) { - printk(KERN_ERR "acpi osc data array is full\n"); - return AE_ERROR; - } - /* do _OSC query for all possible controls */ support_set = osc_data->support_set | (flags & OSC_SUPPORT_MASKS); osc_args.capbuf[OSC_QUERY_TYPE] = OSC_QUERY_ENABLE; osc_args.capbuf[OSC_SUPPORT_TYPE] = support_set; osc_args.capbuf[OSC_CONTROL_TYPE] = OSC_CONTROL_MASKS; - status = acpi_run_osc(handle, &osc_args); + status = acpi_run_osc(osc_data->handle, &osc_args); if (ACPI_SUCCESS(status)) { osc_data->support_set = support_set; - osc_data->query_result = osc_args.query_result; - osc_data->is_queried = 1; + *result = osc_args.ctrl_result; } return status; } +static acpi_status acpi_query_osc(acpi_handle handle, + u32 level, void *context, void **retval) +{ + acpi_status status; + struct acpi_osc_data *osc_data; + u32 flags = (unsigned long)context, dummy; + acpi_handle tmp; + + status = acpi_get_handle(handle, "_OSC", &tmp); + if (ACPI_FAILURE(status)) + return AE_OK; + + mutex_lock(&pci_acpi_lock); + osc_data = acpi_get_osc_data(handle); + if (!osc_data) { + printk(KERN_ERR "acpi osc data array is full\n"); + goto out; + } + + __acpi_query_osc(flags, osc_data, &dummy); +out: + mutex_unlock(&pci_acpi_lock); + return AE_OK; +} + /** * __pci_osc_support_set - register OS support to Firmware * @flags: OS support bits @@ -181,7 +192,7 @@ acpi_status __pci_osc_support_set(u32 flags, const char *hid) acpi_status pci_osc_control_set(acpi_handle handle, u32 flags) { acpi_status status; - u32 ctrlset, control_set; + u32 ctrlset, control_set, result; acpi_handle tmp; struct acpi_osc_data *osc_data; struct acpi_osc_args osc_args; @@ -190,19 +201,28 @@ acpi_status pci_osc_control_set(acpi_handle handle, u32 flags) if (ACPI_FAILURE(status)) return status; + mutex_lock(&pci_acpi_lock); osc_data = acpi_get_osc_data(handle); if (!osc_data) { printk(KERN_ERR "acpi osc data array is full\n"); - return AE_ERROR; + status = AE_ERROR; + goto out; } ctrlset = (flags & OSC_CONTROL_MASKS); - if (!ctrlset) - return AE_TYPE; + if (!ctrlset) { + status = AE_TYPE; + goto out; + } - if (osc_data->is_queried && - ((osc_data->query_result & ctrlset) != ctrlset)) - return AE_SUPPORT; + status = __acpi_query_osc(osc_data->support_set, osc_data, &result); + if (ACPI_FAILURE(status)) + goto out; + + if ((result & ctrlset) != ctrlset) { + status = AE_SUPPORT; + goto out; + } control_set = osc_data->control_set | ctrlset; osc_args.capbuf[OSC_QUERY_TYPE] = 0; @@ -211,7 +231,8 @@ acpi_status pci_osc_control_set(acpi_handle handle, u32 flags) status = acpi_run_osc(handle, &osc_args); if (ACPI_SUCCESS(status)) osc_data->control_set = control_set; - +out: + mutex_unlock(&pci_acpi_lock); return status; } EXPORT_SYMBOL(pci_osc_control_set); diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index 4db261e13e69..533aeb5fcbe4 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -18,6 +18,7 @@ #include <linux/log2.h> #include <linux/pci-aspm.h> #include <linux/pm_wakeup.h> +#include <linux/interrupt.h> #include <asm/dma.h> /* isa_dma_bridge_buggy */ #include "pci.h" @@ -1746,6 +1747,103 @@ EXPORT_SYMBOL(pci_set_dma_seg_boundary); #endif /** + * pci_execute_reset_function() - Reset a PCI device function + * @dev: Device function to reset + * + * Some devices allow an individual function to be reset without affecting + * other functions in the same device. The PCI device must be responsive + * to PCI config space in order to use this function. + * + * The device function is presumed to be unused when this function is called. + * Resetting the device will make the contents of PCI configuration space + * random, so any caller of this must be prepared to reinitialise the + * device including MSI, bus mastering, BARs, decoding IO and memory spaces, + * etc. + * + * Returns 0 if the device function was successfully reset or -ENOTTY if the + * device doesn't support resetting a single function. + */ +int pci_execute_reset_function(struct pci_dev *dev) +{ + u16 status; + u32 cap; + int exppos = pci_find_capability(dev, PCI_CAP_ID_EXP); + + if (!exppos) + return -ENOTTY; + pci_read_config_dword(dev, exppos + PCI_EXP_DEVCAP, &cap); + if (!(cap & PCI_EXP_DEVCAP_FLR)) + return -ENOTTY; + + pci_block_user_cfg_access(dev); + + /* Wait for Transaction Pending bit clean */ + msleep(100); + pci_read_config_word(dev, exppos + PCI_EXP_DEVSTA, &status); + if (status & PCI_EXP_DEVSTA_TRPND) { + dev_info(&dev->dev, "Busy after 100ms while trying to reset; " + "sleeping for 1 second\n"); + ssleep(1); + pci_read_config_word(dev, exppos + PCI_EXP_DEVSTA, &status); + if (status & PCI_EXP_DEVSTA_TRPND) + dev_info(&dev->dev, "Still busy after 1s; " + "proceeding with reset anyway\n"); + } + + pci_write_config_word(dev, exppos + PCI_EXP_DEVCTL, + PCI_EXP_DEVCTL_BCR_FLR); + mdelay(100); + + pci_unblock_user_cfg_access(dev); + return 0; +} +EXPORT_SYMBOL_GPL(pci_execute_reset_function); + +/** + * pci_reset_function() - quiesce and reset a PCI device function + * @dev: Device function to reset + * + * Some devices allow an individual function to be reset without affecting + * other functions in the same device. The PCI device must be responsive + * to PCI config space in order to use this function. + * + * This function does not just reset the PCI portion of a device, but + * clears all the state associated with the device. This function differs + * from pci_execute_reset_function in that it saves and restores device state + * over the reset. + * + * Returns 0 if the device function was successfully reset or -ENOTTY if the + * device doesn't support resetting a single function. + */ +int pci_reset_function(struct pci_dev *dev) +{ + u32 cap; + int exppos = pci_find_capability(dev, PCI_CAP_ID_EXP); + int r; + + if (!exppos) + return -ENOTTY; + pci_read_config_dword(dev, exppos + PCI_EXP_DEVCAP, &cap); + if (!(cap & PCI_EXP_DEVCAP_FLR)) + return -ENOTTY; + + if (!dev->msi_enabled && !dev->msix_enabled) + disable_irq(dev->irq); + pci_save_state(dev); + + pci_write_config_word(dev, PCI_COMMAND, PCI_COMMAND_INTX_DISABLE); + + r = pci_execute_reset_function(dev); + + pci_restore_state(dev); + if (!dev->msi_enabled && !dev->msix_enabled) + enable_irq(dev->irq); + + return r; +} +EXPORT_SYMBOL_GPL(pci_reset_function); + +/** * pcix_get_max_mmrbc - get PCI-X maximum designed memory read byte count * @dev: PCI device to query * @@ -1933,6 +2031,9 @@ static int __devinit pci_init(void) while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) { pci_fixup_device(pci_fixup_final, dev); } + + msi_init(); + return 0; } diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h index b205ab866a1d..9de87e9f98f5 100644 --- a/drivers/pci/pci.h +++ b/drivers/pci/pci.h @@ -98,9 +98,11 @@ extern unsigned int pci_pm_d3_delay; #ifdef CONFIG_PCI_MSI void pci_no_msi(void); extern void pci_msi_init_pci_dev(struct pci_dev *dev); +extern void __devinit msi_init(void); #else static inline void pci_no_msi(void) { } static inline void pci_msi_init_pci_dev(struct pci_dev *dev) { } +static inline void msi_init(void) { } #endif #ifdef CONFIG_PCIEAER diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c index aaaf0a1fed22..6f1e51d77bce 100644 --- a/drivers/pci/probe.c +++ b/drivers/pci/probe.c @@ -480,19 +480,27 @@ int __devinit pci_scan_bridge(struct pci_bus *bus, struct pci_dev *dev, int max, int is_cardbus = (dev->hdr_type == PCI_HEADER_TYPE_CARDBUS); u32 buses, i, j = 0; u16 bctl; + int broken = 0; pci_read_config_dword(dev, PCI_PRIMARY_BUS, &buses); dev_dbg(&dev->dev, "scanning behind bridge, config %06x, pass %d\n", buses & 0xffffff, pass); + /* Check if setup is sensible at all */ + if (!pass && + ((buses & 0xff) != bus->number || ((buses >> 8) & 0xff) <= bus->number)) { + dev_dbg(&dev->dev, "bus configuration invalid, reconfiguring\n"); + broken = 1; + } + /* Disable MasterAbortMode during probing to avoid reporting of bus errors (in some architectures) */ pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &bctl); pci_write_config_word(dev, PCI_BRIDGE_CONTROL, bctl & ~PCI_BRIDGE_CTL_MASTER_ABORT); - if ((buses & 0xffff00) && !pcibios_assign_all_busses() && !is_cardbus) { + if ((buses & 0xffff00) && !pcibios_assign_all_busses() && !is_cardbus && !broken) { unsigned int cmax, busnr; /* * Bus already configured by firmware, process it in the first @@ -530,7 +538,7 @@ int __devinit pci_scan_bridge(struct pci_bus *bus, struct pci_dev *dev, int max, * do in the second pass. */ if (!pass) { - if (pcibios_assign_all_busses()) + if (pcibios_assign_all_busses() || broken) /* Temporarily disable forwarding of the configuration cycles on all bridges in this bus segment to avoid possible diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index bbf66ea8fd87..96cf8ecd04ce 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -43,6 +43,20 @@ static void __devinit quirk_mellanox_tavor(struct pci_dev *dev) DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_MELLANOX,PCI_DEVICE_ID_MELLANOX_TAVOR,quirk_mellanox_tavor); DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_MELLANOX,PCI_DEVICE_ID_MELLANOX_TAVOR_BRIDGE,quirk_mellanox_tavor); +/* Many VIA bridges seem to corrupt data for DAC. Disable it here */ +int forbid_dac __read_mostly; +EXPORT_SYMBOL(forbid_dac); + +static __devinit void via_no_dac(struct pci_dev *dev) +{ + if ((dev->class >> 8) == PCI_CLASS_BRIDGE_PCI && forbid_dac == 0) { + dev_info(&dev->dev, + "VIA PCI bridge detected. Disabling DAC.\n"); + forbid_dac = 1; + } +} +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_ANY_ID, via_no_dac); + /* Deal with broken BIOS'es that neglect to enable passive release, which can cause problems in combination with the 82441FX/PPro MTRRs */ static void quirk_passive_release(struct pci_dev *dev) diff --git a/drivers/pci/search.c b/drivers/pci/search.c index 4edfc4731bd4..5af8bd538149 100644 --- a/drivers/pci/search.c +++ b/drivers/pci/search.c @@ -166,6 +166,7 @@ struct pci_dev *pci_find_device(unsigned int vendor, unsigned int device, { struct pci_dev *pdev; + pci_dev_get(from); pdev = pci_get_subsys(vendor, device, PCI_ANY_ID, PCI_ANY_ID, from); pci_dev_put(pdev); return pdev; @@ -270,12 +271,8 @@ static struct pci_dev *pci_get_dev_by_id(const struct pci_device_id *id, struct pci_dev *pdev = NULL; WARN_ON(in_interrupt()); - if (from) { - /* FIXME - * take the cast off, when bus_find_device is made const. - */ - dev_start = (struct device *)&from->dev; - } + if (from) + dev_start = &from->dev; dev = bus_find_device(&pci_bus_type, dev_start, (void *)id, match_pci_dev_by_id); if (dev) diff --git a/drivers/pci/slot.c b/drivers/pci/slot.c index 0c6db03698ea..4dd1c3e157ae 100644 --- a/drivers/pci/slot.c +++ b/drivers/pci/slot.c @@ -78,18 +78,100 @@ static struct kobj_type pci_slot_ktype = { .default_attrs = pci_slot_default_attrs, }; +static char *make_slot_name(const char *name) +{ + char *new_name; + int len, max, dup; + + new_name = kstrdup(name, GFP_KERNEL); + if (!new_name) + return NULL; + + /* + * Make sure we hit the realloc case the first time through the + * loop. 'len' will be strlen(name) + 3 at that point which is + * enough space for "name-X" and the trailing NUL. + */ + len = strlen(name) + 2; + max = 1; + dup = 1; + + for (;;) { + struct kobject *dup_slot; + dup_slot = kset_find_obj(pci_slots_kset, new_name); + if (!dup_slot) + break; + kobject_put(dup_slot); + if (dup == max) { + len++; + max *= 10; + kfree(new_name); + new_name = kmalloc(len, GFP_KERNEL); + if (!new_name) + break; + } + sprintf(new_name, "%s-%d", name, dup++); + } + + return new_name; +} + +static int rename_slot(struct pci_slot *slot, const char *name) +{ + int result = 0; + char *slot_name; + + if (strcmp(pci_slot_name(slot), name) == 0) + return result; + + slot_name = make_slot_name(name); + if (!slot_name) + return -ENOMEM; + + result = kobject_rename(&slot->kobj, slot_name); + kfree(slot_name); + + return result; +} + +static struct pci_slot *get_slot(struct pci_bus *parent, int slot_nr) +{ + struct pci_slot *slot; + /* + * We already hold pci_bus_sem so don't worry + */ + list_for_each_entry(slot, &parent->slots, list) + if (slot->number == slot_nr) { + kobject_get(&slot->kobj); + return slot; + } + + return NULL; +} + /** * pci_create_slot - create or increment refcount for physical PCI slot * @parent: struct pci_bus of parent bridge * @slot_nr: PCI_SLOT(pci_dev->devfn) or -1 for placeholder * @name: user visible string presented in /sys/bus/pci/slots/<name> + * @hotplug: set if caller is hotplug driver, NULL otherwise * * PCI slots have first class attributes such as address, speed, width, * and a &struct pci_slot is used to manage them. This interface will * either return a new &struct pci_slot to the caller, or if the pci_slot * already exists, its refcount will be incremented. * - * Slots are uniquely identified by a @pci_bus, @slot_nr, @name tuple. + * Slots are uniquely identified by a @pci_bus, @slot_nr tuple. + * + * There are known platforms with broken firmware that assign the same + * name to multiple slots. Workaround these broken platforms by renaming + * the slots on behalf of the caller. If firmware assigns name N to + * multiple slots: + * + * The first slot is assigned N + * The second slot is assigned N-1 + * The third slot is assigned N-2 + * etc. * * Placeholder slots: * In most cases, @pci_bus, @slot_nr will be sufficient to uniquely identify @@ -98,61 +180,67 @@ static struct kobj_type pci_slot_ktype = { * the slot. In this scenario, the caller may pass -1 for @slot_nr. * * The following semantics are imposed when the caller passes @slot_nr == - * -1. First, the check for existing %struct pci_slot is skipped, as the - * caller may know about several unpopulated slots on a given %struct - * pci_bus, and each slot would have a @slot_nr of -1. Uniqueness for - * these slots is then determined by the @name parameter. We expect - * kobject_init_and_add() to warn us if the caller attempts to create - * multiple slots with the same name. The other change in semantics is + * -1. First, we no longer check for an existing %struct pci_slot, as there + * may be many slots with @slot_nr of -1. The other change in semantics is * user-visible, which is the 'address' parameter presented in sysfs will * consist solely of a dddd:bb tuple, where dddd is the PCI domain of the * %struct pci_bus and bb is the bus number. In other words, the devfn of * the 'placeholder' slot will not be displayed. */ - struct pci_slot *pci_create_slot(struct pci_bus *parent, int slot_nr, - const char *name) + const char *name, + struct hotplug_slot *hotplug) { struct pci_dev *dev; struct pci_slot *slot; - int err; + int err = 0; + char *slot_name = NULL; down_write(&pci_bus_sem); if (slot_nr == -1) goto placeholder; - /* If we've already created this slot, bump refcount and return. */ - list_for_each_entry(slot, &parent->slots, list) { - if (slot->number == slot_nr) { - kobject_get(&slot->kobj); - pr_debug("%s: inc refcount to %d on %04x:%02x:%02x\n", - __func__, - atomic_read(&slot->kobj.kref.refcount), - pci_domain_nr(parent), parent->number, - slot_nr); - goto out; + /* + * Hotplug drivers are allowed to rename an existing slot, + * but only if not already claimed. + */ + slot = get_slot(parent, slot_nr); + if (slot) { + if (hotplug) { + if ((err = slot->hotplug ? -EBUSY : 0) + || (err = rename_slot(slot, name))) { + kobject_put(&slot->kobj); + slot = NULL; + goto err; + } } + goto out; } placeholder: slot = kzalloc(sizeof(*slot), GFP_KERNEL); if (!slot) { - slot = ERR_PTR(-ENOMEM); - goto out; + err = -ENOMEM; + goto err; } slot->bus = parent; slot->number = slot_nr; slot->kobj.kset = pci_slots_kset; - err = kobject_init_and_add(&slot->kobj, &pci_slot_ktype, NULL, - "%s", name); - if (err) { - printk(KERN_ERR "Unable to register kobject %s\n", name); + + slot_name = make_slot_name(name); + if (!slot_name) { + err = -ENOMEM; goto err; } + err = kobject_init_and_add(&slot->kobj, &pci_slot_ktype, NULL, + "%s", slot_name); + if (err) + goto err; + INIT_LIST_HEAD(&slot->list); list_add(&slot->list, &parent->slots); @@ -164,10 +252,10 @@ placeholder: pr_debug("%s: created pci_slot on %04x:%02x:%02x\n", __func__, pci_domain_nr(parent), parent->number, slot_nr); - out: +out: up_write(&pci_bus_sem); return slot; - err: +err: kfree(slot); slot = ERR_PTR(err); goto out; @@ -175,7 +263,7 @@ placeholder: EXPORT_SYMBOL_GPL(pci_create_slot); /** - * pci_update_slot_number - update %struct pci_slot -> number + * pci_renumber_slot - update %struct pci_slot -> number * @slot - %struct pci_slot to update * @slot_nr - new number for slot * @@ -183,27 +271,22 @@ EXPORT_SYMBOL_GPL(pci_create_slot); * created a placeholder slot in pci_create_slot() by passing a -1 as * slot_nr, to update their %struct pci_slot with the correct @slot_nr. */ - -void pci_update_slot_number(struct pci_slot *slot, int slot_nr) +void pci_renumber_slot(struct pci_slot *slot, int slot_nr) { - int name_count = 0; struct pci_slot *tmp; down_write(&pci_bus_sem); list_for_each_entry(tmp, &slot->bus->slots, list) { WARN_ON(tmp->number == slot_nr); - if (!strcmp(kobject_name(&tmp->kobj), kobject_name(&slot->kobj))) - name_count++; + goto out; } - if (name_count > 1) - printk(KERN_WARNING "pci_update_slot_number found %d slots with the same name: %s\n", name_count, kobject_name(&slot->kobj)); - slot->number = slot_nr; +out: up_write(&pci_bus_sem); } -EXPORT_SYMBOL_GPL(pci_update_slot_number); +EXPORT_SYMBOL_GPL(pci_renumber_slot); /** * pci_destroy_slot - decrement refcount for physical PCI slot @@ -213,7 +296,6 @@ EXPORT_SYMBOL_GPL(pci_update_slot_number); * just call kobject_put on its kobj and let our release methods do the * rest. */ - void pci_destroy_slot(struct pci_slot *slot) { pr_debug("%s: dec refcount to %d on %04x:%02x:%02x\n", __func__, diff --git a/drivers/pcmcia/Makefile b/drivers/pcmcia/Makefile index b46c60b72708..23e492bf75cf 100644 --- a/drivers/pcmcia/Makefile +++ b/drivers/pcmcia/Makefile @@ -70,7 +70,7 @@ pxa2xx-obj-$(CONFIG_MACH_MAINSTONE) += pxa2xx_mainstone.o pxa2xx-obj-$(CONFIG_PXA_SHARPSL) += pxa2xx_sharpsl.o pxa2xx-obj-$(CONFIG_MACH_ARMCORE) += pxa2xx_cm_x2xx_cs.o pxa2xx-obj-$(CONFIG_ARCH_VIPER) += pxa2xx_viper.o -pxa2xx-obj-$(CONFIG_TRIZEPS_PCMCIA) += pxa2xx_trizeps.o +pxa2xx-obj-$(CONFIG_TRIZEPS_PCMCIA) += pxa2xx_trizeps4.o pxa2xx-obj-$(CONFIG_MACH_PALMTX) += pxa2xx_palmtx.o pxa2xx-obj-$(CONFIG_MACH_PALMLD) += pxa2xx_palmld.o diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig index 814f49fde530..8abbb2020af9 100644 --- a/drivers/rtc/Kconfig +++ b/drivers/rtc/Kconfig @@ -171,10 +171,10 @@ config RTC_DRV_MAX6900 will be called rtc-max6900. config RTC_DRV_RS5C372 - tristate "Ricoh RS5C372A/B, RV5C386, RV5C387A" + tristate "Ricoh R2025S/D, RS5C372A/B, RV5C386, RV5C387A" help If you say yes here you get support for the - Ricoh RS5C372A, RS5C372B, RV5C386, and RV5C387A RTC chips. + Ricoh R2025S/D, RS5C372A, RS5C372B, RV5C386, and RV5C387A RTC chips. This driver can also be built as a module. If so, the module will be called rtc-rs5c372. @@ -246,6 +246,16 @@ config RTC_DRV_TWL92330 platforms. The support is integrated with the rest of the Menelaus driver; it's not separate module. +config RTC_DRV_TWL4030 + tristate "TI TWL4030/TWL5030/TPS659x0" + depends on RTC_CLASS && TWL4030_CORE + help + If you say yes here you get support for the RTC on the + TWL4030 family chips, used mostly with OMAP3 platforms. + + This driver can also be built as a module. If so, the module + will be called rtc-twl4030. + config RTC_DRV_S35390A tristate "Seiko Instruments S-35390A" select BITREVERSE diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile index d6a9ac7176ea..e9e8474cc8fe 100644 --- a/drivers/rtc/Makefile +++ b/drivers/rtc/Makefile @@ -63,6 +63,7 @@ obj-$(CONFIG_RTC_DRV_SA1100) += rtc-sa1100.o obj-$(CONFIG_RTC_DRV_SH) += rtc-sh.o obj-$(CONFIG_RTC_DRV_STK17TA8) += rtc-stk17ta8.o obj-$(CONFIG_RTC_DRV_TEST) += rtc-test.o +obj-$(CONFIG_RTC_DRV_TWL4030) += rtc-twl4030.o obj-$(CONFIG_RTC_DRV_V3020) += rtc-v3020.o obj-$(CONFIG_RTC_DRV_VR41XX) += rtc-vr41xx.o obj-$(CONFIG_RTC_DRV_X1205) += rtc-x1205.o diff --git a/drivers/rtc/rtc-twl4030.c b/drivers/rtc/rtc-twl4030.c new file mode 100644 index 000000000000..abe87a4d2665 --- /dev/null +++ b/drivers/rtc/rtc-twl4030.c @@ -0,0 +1,564 @@ +/* + * rtc-twl4030.c -- TWL4030 Real Time Clock interface + * + * Copyright (C) 2007 MontaVista Software, Inc + * Author: Alexandre Rusev <source@mvista.com> + * + * Based on original TI driver twl4030-rtc.c + * Copyright (C) 2006 Texas Instruments, Inc. + * + * Based on rtc-omap.c + * Copyright (C) 2003 MontaVista Software, Inc. + * Author: George G. Davis <gdavis@mvista.com> or <source@mvista.com> + * Copyright (C) 2006 David Brownell + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/types.h> +#include <linux/rtc.h> +#include <linux/bcd.h> +#include <linux/platform_device.h> +#include <linux/interrupt.h> + +#include <linux/i2c/twl4030.h> + + +/* + * RTC block register offsets (use TWL_MODULE_RTC) + */ +#define REG_SECONDS_REG 0x00 +#define REG_MINUTES_REG 0x01 +#define REG_HOURS_REG 0x02 +#define REG_DAYS_REG 0x03 +#define REG_MONTHS_REG 0x04 +#define REG_YEARS_REG 0x05 +#define REG_WEEKS_REG 0x06 + +#define REG_ALARM_SECONDS_REG 0x07 +#define REG_ALARM_MINUTES_REG 0x08 +#define REG_ALARM_HOURS_REG 0x09 +#define REG_ALARM_DAYS_REG 0x0A +#define REG_ALARM_MONTHS_REG 0x0B +#define REG_ALARM_YEARS_REG 0x0C + +#define REG_RTC_CTRL_REG 0x0D +#define REG_RTC_STATUS_REG 0x0E +#define REG_RTC_INTERRUPTS_REG 0x0F + +#define REG_RTC_COMP_LSB_REG 0x10 +#define REG_RTC_COMP_MSB_REG 0x11 + +/* RTC_CTRL_REG bitfields */ +#define BIT_RTC_CTRL_REG_STOP_RTC_M 0x01 +#define BIT_RTC_CTRL_REG_ROUND_30S_M 0x02 +#define BIT_RTC_CTRL_REG_AUTO_COMP_M 0x04 +#define BIT_RTC_CTRL_REG_MODE_12_24_M 0x08 +#define BIT_RTC_CTRL_REG_TEST_MODE_M 0x10 +#define BIT_RTC_CTRL_REG_SET_32_COUNTER_M 0x20 +#define BIT_RTC_CTRL_REG_GET_TIME_M 0x40 + +/* RTC_STATUS_REG bitfields */ +#define BIT_RTC_STATUS_REG_RUN_M 0x02 +#define BIT_RTC_STATUS_REG_1S_EVENT_M 0x04 +#define BIT_RTC_STATUS_REG_1M_EVENT_M 0x08 +#define BIT_RTC_STATUS_REG_1H_EVENT_M 0x10 +#define BIT_RTC_STATUS_REG_1D_EVENT_M 0x20 +#define BIT_RTC_STATUS_REG_ALARM_M 0x40 +#define BIT_RTC_STATUS_REG_POWER_UP_M 0x80 + +/* RTC_INTERRUPTS_REG bitfields */ +#define BIT_RTC_INTERRUPTS_REG_EVERY_M 0x03 +#define BIT_RTC_INTERRUPTS_REG_IT_TIMER_M 0x04 +#define BIT_RTC_INTERRUPTS_REG_IT_ALARM_M 0x08 + + +/* REG_SECONDS_REG through REG_YEARS_REG is how many registers? */ +#define ALL_TIME_REGS 6 + +/*----------------------------------------------------------------------*/ + +/* + * Supports 1 byte read from TWL4030 RTC register. + */ +static int twl4030_rtc_read_u8(u8 *data, u8 reg) +{ + int ret; + + ret = twl4030_i2c_read_u8(TWL4030_MODULE_RTC, data, reg); + if (ret < 0) + pr_err("twl4030_rtc: Could not read TWL4030" + "register %X - error %d\n", reg, ret); + return ret; +} + +/* + * Supports 1 byte write to TWL4030 RTC registers. + */ +static int twl4030_rtc_write_u8(u8 data, u8 reg) +{ + int ret; + + ret = twl4030_i2c_write_u8(TWL4030_MODULE_RTC, data, reg); + if (ret < 0) + pr_err("twl4030_rtc: Could not write TWL4030" + "register %X - error %d\n", reg, ret); + return ret; +} + +/* + * Cache the value for timer/alarm interrupts register; this is + * only changed by callers holding rtc ops lock (or resume). + */ +static unsigned char rtc_irq_bits; + +/* + * Enable timer and/or alarm interrupts. + */ +static int set_rtc_irq_bit(unsigned char bit) +{ + unsigned char val; + int ret; + + val = rtc_irq_bits | bit; + ret = twl4030_rtc_write_u8(val, REG_RTC_INTERRUPTS_REG); + if (ret == 0) + rtc_irq_bits = val; + + return ret; +} + +/* + * Disable timer and/or alarm interrupts. + */ +static int mask_rtc_irq_bit(unsigned char bit) +{ + unsigned char val; + int ret; + + val = rtc_irq_bits & ~bit; + ret = twl4030_rtc_write_u8(val, REG_RTC_INTERRUPTS_REG); + if (ret == 0) + rtc_irq_bits = val; + + return ret; +} + +static inline int twl4030_rtc_alarm_irq_set_state(int enabled) +{ + int ret; + + if (enabled) + ret = set_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_ALARM_M); + else + ret = mask_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_ALARM_M); + + return ret; +} + +static inline int twl4030_rtc_irq_set_state(int enabled) +{ + int ret; + + if (enabled) + ret = set_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_TIMER_M); + else + ret = mask_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_TIMER_M); + + return ret; +} + +/* + * Gets current TWL4030 RTC time and date parameters. + * + * The RTC's time/alarm representation is not what gmtime(3) requires + * Linux to use: + * + * - Months are 1..12 vs Linux 0-11 + * - Years are 0..99 vs Linux 1900..N (we assume 21st century) + */ +static int twl4030_rtc_read_time(struct device *dev, struct rtc_time *tm) +{ + unsigned char rtc_data[ALL_TIME_REGS + 1]; + int ret; + u8 save_control; + + ret = twl4030_rtc_read_u8(&save_control, REG_RTC_CTRL_REG); + if (ret < 0) + return ret; + + save_control |= BIT_RTC_CTRL_REG_GET_TIME_M; + + ret = twl4030_rtc_write_u8(save_control, REG_RTC_CTRL_REG); + if (ret < 0) + return ret; + + ret = twl4030_i2c_read(TWL4030_MODULE_RTC, rtc_data, + REG_SECONDS_REG, ALL_TIME_REGS); + + if (ret < 0) { + dev_err(dev, "rtc_read_time error %d\n", ret); + return ret; + } + + tm->tm_sec = bcd2bin(rtc_data[0]); + tm->tm_min = bcd2bin(rtc_data[1]); + tm->tm_hour = bcd2bin(rtc_data[2]); + tm->tm_mday = bcd2bin(rtc_data[3]); + tm->tm_mon = bcd2bin(rtc_data[4]) - 1; + tm->tm_year = bcd2bin(rtc_data[5]) + 100; + + return ret; +} + +static int twl4030_rtc_set_time(struct device *dev, struct rtc_time *tm) +{ + unsigned char save_control; + unsigned char rtc_data[ALL_TIME_REGS + 1]; + int ret; + + rtc_data[1] = bin2bcd(tm->tm_sec); + rtc_data[2] = bin2bcd(tm->tm_min); + rtc_data[3] = bin2bcd(tm->tm_hour); + rtc_data[4] = bin2bcd(tm->tm_mday); + rtc_data[5] = bin2bcd(tm->tm_mon + 1); + rtc_data[6] = bin2bcd(tm->tm_year - 100); + + /* Stop RTC while updating the TC registers */ + ret = twl4030_rtc_read_u8(&save_control, REG_RTC_CTRL_REG); + if (ret < 0) + goto out; + + save_control &= ~BIT_RTC_CTRL_REG_STOP_RTC_M; + twl4030_rtc_write_u8(save_control, REG_RTC_CTRL_REG); + if (ret < 0) + goto out; + + /* update all the time registers in one shot */ + ret = twl4030_i2c_write(TWL4030_MODULE_RTC, rtc_data, + REG_SECONDS_REG, ALL_TIME_REGS); + if (ret < 0) { + dev_err(dev, "rtc_set_time error %d\n", ret); + goto out; + } + + /* Start back RTC */ + save_control |= BIT_RTC_CTRL_REG_STOP_RTC_M; + ret = twl4030_rtc_write_u8(save_control, REG_RTC_CTRL_REG); + +out: + return ret; +} + +/* + * Gets current TWL4030 RTC alarm time. + */ +static int twl4030_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alm) +{ + unsigned char rtc_data[ALL_TIME_REGS + 1]; + int ret; + + ret = twl4030_i2c_read(TWL4030_MODULE_RTC, rtc_data, + REG_ALARM_SECONDS_REG, ALL_TIME_REGS); + if (ret < 0) { + dev_err(dev, "rtc_read_alarm error %d\n", ret); + return ret; + } + + /* some of these fields may be wildcard/"match all" */ + alm->time.tm_sec = bcd2bin(rtc_data[0]); + alm->time.tm_min = bcd2bin(rtc_data[1]); + alm->time.tm_hour = bcd2bin(rtc_data[2]); + alm->time.tm_mday = bcd2bin(rtc_data[3]); + alm->time.tm_mon = bcd2bin(rtc_data[4]) - 1; + alm->time.tm_year = bcd2bin(rtc_data[5]) + 100; + + /* report cached alarm enable state */ + if (rtc_irq_bits & BIT_RTC_INTERRUPTS_REG_IT_ALARM_M) + alm->enabled = 1; + + return ret; +} + +static int twl4030_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alm) +{ + unsigned char alarm_data[ALL_TIME_REGS + 1]; + int ret; + + ret = twl4030_rtc_alarm_irq_set_state(0); + if (ret) + goto out; + + alarm_data[1] = bin2bcd(alm->time.tm_sec); + alarm_data[2] = bin2bcd(alm->time.tm_min); + alarm_data[3] = bin2bcd(alm->time.tm_hour); + alarm_data[4] = bin2bcd(alm->time.tm_mday); + alarm_data[5] = bin2bcd(alm->time.tm_mon + 1); + alarm_data[6] = bin2bcd(alm->time.tm_year - 100); + + /* update all the alarm registers in one shot */ + ret = twl4030_i2c_write(TWL4030_MODULE_RTC, alarm_data, + REG_ALARM_SECONDS_REG, ALL_TIME_REGS); + if (ret) { + dev_err(dev, "rtc_set_alarm error %d\n", ret); + goto out; + } + + if (alm->enabled) + ret = twl4030_rtc_alarm_irq_set_state(1); +out: + return ret; +} + +#ifdef CONFIG_RTC_INTF_DEV + +static int twl4030_rtc_ioctl(struct device *dev, unsigned int cmd, + unsigned long arg) +{ + switch (cmd) { + case RTC_AIE_OFF: + return twl4030_rtc_alarm_irq_set_state(0); + case RTC_AIE_ON: + return twl4030_rtc_alarm_irq_set_state(1); + case RTC_UIE_OFF: + return twl4030_rtc_irq_set_state(0); + case RTC_UIE_ON: + return twl4030_rtc_irq_set_state(1); + + default: + return -ENOIOCTLCMD; + } +} + +#else +#define omap_rtc_ioctl NULL +#endif + +static irqreturn_t twl4030_rtc_interrupt(int irq, void *rtc) +{ + unsigned long events = 0; + int ret = IRQ_NONE; + int res; + u8 rd_reg; + +#ifdef CONFIG_LOCKDEP + /* WORKAROUND for lockdep forcing IRQF_DISABLED on us, which + * we don't want and can't tolerate. Although it might be + * friendlier not to borrow this thread context... + */ + local_irq_enable(); +#endif + + res = twl4030_rtc_read_u8(&rd_reg, REG_RTC_STATUS_REG); + if (res) + goto out; + /* + * Figure out source of interrupt: ALARM or TIMER in RTC_STATUS_REG. + * only one (ALARM or RTC) interrupt source may be enabled + * at time, we also could check our results + * by reading RTS_INTERRUPTS_REGISTER[IT_TIMER,IT_ALARM] + */ + if (rd_reg & BIT_RTC_STATUS_REG_ALARM_M) + events |= RTC_IRQF | RTC_AF; + else + events |= RTC_IRQF | RTC_UF; + + res = twl4030_rtc_write_u8(rd_reg | BIT_RTC_STATUS_REG_ALARM_M, + REG_RTC_STATUS_REG); + if (res) + goto out; + + /* Clear on Read enabled. RTC_IT bit of TWL4030_INT_PWR_ISR1 + * needs 2 reads to clear the interrupt. One read is done in + * do_twl4030_pwrirq(). Doing the second read, to clear + * the bit. + * + * FIXME the reason PWR_ISR1 needs an extra read is that + * RTC_IF retriggered until we cleared REG_ALARM_M above. + * But re-reading like this is a bad hack; by doing so we + * risk wrongly clearing status for some other IRQ (losing + * the interrupt). Be smarter about handling RTC_UF ... + */ + res = twl4030_i2c_read_u8(TWL4030_MODULE_INT, + &rd_reg, TWL4030_INT_PWR_ISR1); + if (res) + goto out; + + /* Notify RTC core on event */ + rtc_update_irq(rtc, 1, events); + + ret = IRQ_HANDLED; +out: + return ret; +} + +static struct rtc_class_ops twl4030_rtc_ops = { + .ioctl = twl4030_rtc_ioctl, + .read_time = twl4030_rtc_read_time, + .set_time = twl4030_rtc_set_time, + .read_alarm = twl4030_rtc_read_alarm, + .set_alarm = twl4030_rtc_set_alarm, +}; + +/*----------------------------------------------------------------------*/ + +static int __devinit twl4030_rtc_probe(struct platform_device *pdev) +{ + struct rtc_device *rtc; + int ret = 0; + int irq = platform_get_irq(pdev, 0); + u8 rd_reg; + + if (irq < 0) + return irq; + + rtc = rtc_device_register(pdev->name, + &pdev->dev, &twl4030_rtc_ops, THIS_MODULE); + if (IS_ERR(rtc)) { + ret = -EINVAL; + dev_err(&pdev->dev, "can't register RTC device, err %ld\n", + PTR_ERR(rtc)); + goto out0; + + } + + platform_set_drvdata(pdev, rtc); + + ret = twl4030_rtc_read_u8(&rd_reg, REG_RTC_STATUS_REG); + + if (ret < 0) + goto out1; + + if (rd_reg & BIT_RTC_STATUS_REG_POWER_UP_M) + dev_warn(&pdev->dev, "Power up reset detected.\n"); + + if (rd_reg & BIT_RTC_STATUS_REG_ALARM_M) + dev_warn(&pdev->dev, "Pending Alarm interrupt detected.\n"); + + /* Clear RTC Power up reset and pending alarm interrupts */ + ret = twl4030_rtc_write_u8(rd_reg, REG_RTC_STATUS_REG); + if (ret < 0) + goto out1; + + ret = request_irq(irq, twl4030_rtc_interrupt, + IRQF_TRIGGER_RISING, + rtc->dev.bus_id, rtc); + if (ret < 0) { + dev_err(&pdev->dev, "IRQ is not free.\n"); + goto out1; + } + + /* Check RTC module status, Enable if it is off */ + ret = twl4030_rtc_read_u8(&rd_reg, REG_RTC_CTRL_REG); + if (ret < 0) + goto out2; + + if (!(rd_reg & BIT_RTC_CTRL_REG_STOP_RTC_M)) { + dev_info(&pdev->dev, "Enabling TWL4030-RTC.\n"); + rd_reg = BIT_RTC_CTRL_REG_STOP_RTC_M; + ret = twl4030_rtc_write_u8(rd_reg, REG_RTC_CTRL_REG); + if (ret < 0) + goto out2; + } + + /* init cached IRQ enable bits */ + ret = twl4030_rtc_read_u8(&rtc_irq_bits, REG_RTC_INTERRUPTS_REG); + if (ret < 0) + goto out2; + + return ret; + + +out2: + free_irq(irq, rtc); +out1: + rtc_device_unregister(rtc); +out0: + return ret; +} + +/* + * Disable all TWL4030 RTC module interrupts. + * Sets status flag to free. + */ +static int __devexit twl4030_rtc_remove(struct platform_device *pdev) +{ + /* leave rtc running, but disable irqs */ + struct rtc_device *rtc = platform_get_drvdata(pdev); + int irq = platform_get_irq(pdev, 0); + + mask_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_ALARM_M); + mask_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_TIMER_M); + + free_irq(irq, rtc); + + rtc_device_unregister(rtc); + platform_set_drvdata(pdev, NULL); + return 0; +} + +static void twl4030_rtc_shutdown(struct platform_device *pdev) +{ + mask_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_TIMER_M | + BIT_RTC_INTERRUPTS_REG_IT_ALARM_M); +} + +#ifdef CONFIG_PM + +static unsigned char irqstat; + +static int twl4030_rtc_suspend(struct platform_device *pdev, pm_message_t state) +{ + irqstat = rtc_irq_bits; + + /* REVISIT alarm may need to wake us from sleep */ + mask_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_TIMER_M | + BIT_RTC_INTERRUPTS_REG_IT_ALARM_M); + return 0; +} + +static int twl4030_rtc_resume(struct platform_device *pdev) +{ + set_rtc_irq_bit(irqstat); + return 0; +} + +#else +#define twl4030_rtc_suspend NULL +#define twl4030_rtc_resume NULL +#endif + +MODULE_ALIAS("platform:twl4030_rtc"); + +static struct platform_driver twl4030rtc_driver = { + .probe = twl4030_rtc_probe, + .remove = __devexit_p(twl4030_rtc_remove), + .shutdown = twl4030_rtc_shutdown, + .suspend = twl4030_rtc_suspend, + .resume = twl4030_rtc_resume, + .driver = { + .owner = THIS_MODULE, + .name = "twl4030_rtc", + }, +}; + +static int __init twl4030_rtc_init(void) +{ + return platform_driver_register(&twl4030rtc_driver); +} +module_init(twl4030_rtc_init); + +static void __exit twl4030_rtc_exit(void) +{ + platform_driver_unregister(&twl4030rtc_driver); +} +module_exit(twl4030_rtc_exit); + +MODULE_AUTHOR("Texas Instruments, MontaVista Software"); +MODULE_LICENSE("GPL"); diff --git a/drivers/serial/8250_pci.c b/drivers/serial/8250_pci.c index c014ffb110e9..5450a0e5ecdb 100644 --- a/drivers/serial/8250_pci.c +++ b/drivers/serial/8250_pci.c @@ -1100,6 +1100,8 @@ enum pci_board_num_t { pbn_b0_4_1843200_200, pbn_b0_8_1843200_200, + pbn_b0_1_4000000, + pbn_b0_bt_1_115200, pbn_b0_bt_2_115200, pbn_b0_bt_8_115200, @@ -1167,6 +1169,10 @@ enum pci_board_num_t { pbn_exsys_4055, pbn_plx_romulus, pbn_oxsemi, + pbn_oxsemi_1_4000000, + pbn_oxsemi_2_4000000, + pbn_oxsemi_4_4000000, + pbn_oxsemi_8_4000000, pbn_intel_i960, pbn_sgi_ioc3, pbn_computone_4, @@ -1290,6 +1296,12 @@ static struct pciserial_board pci_boards[] __devinitdata = { .base_baud = 1843200, .uart_offset = 0x200, }, + [pbn_b0_1_4000000] = { + .flags = FL_BASE0, + .num_ports = 1, + .base_baud = 4000000, + .uart_offset = 8, + }, [pbn_b0_bt_1_115200] = { .flags = FL_BASE0|FL_BASE_BARS, @@ -1625,6 +1637,35 @@ static struct pciserial_board pci_boards[] __devinitdata = { .base_baud = 115200, .uart_offset = 8, }, + [pbn_oxsemi_1_4000000] = { + .flags = FL_BASE0, + .num_ports = 1, + .base_baud = 4000000, + .uart_offset = 0x200, + .first_offset = 0x1000, + }, + [pbn_oxsemi_2_4000000] = { + .flags = FL_BASE0, + .num_ports = 2, + .base_baud = 4000000, + .uart_offset = 0x200, + .first_offset = 0x1000, + }, + [pbn_oxsemi_4_4000000] = { + .flags = FL_BASE0, + .num_ports = 4, + .base_baud = 4000000, + .uart_offset = 0x200, + .first_offset = 0x1000, + }, + [pbn_oxsemi_8_4000000] = { + .flags = FL_BASE0, + .num_ports = 8, + .base_baud = 4000000, + .uart_offset = 0x200, + .first_offset = 0x1000, + }, + /* * EKF addition for i960 Boards form EKF with serial port. @@ -1813,6 +1854,39 @@ serial_pci_matches(struct pciserial_board *board, board->first_offset == guessed->first_offset; } +/* + * Oxford Semiconductor Inc. + * Check that device is part of the Tornado range of devices, then determine + * the number of ports available on the device. + */ +static int pci_oxsemi_tornado_init(struct pci_dev *dev, struct pciserial_board *board) +{ + u8 __iomem *p; + unsigned long deviceID; + unsigned int number_uarts; + + /* OxSemi Tornado devices are all 0xCxxx */ + if (dev->vendor == PCI_VENDOR_ID_OXSEMI && + (dev->device & 0xF000) != 0xC000) + return 0; + + p = pci_iomap(dev, 0, 5); + if (p == NULL) + return -ENOMEM; + + deviceID = ioread32(p); + /* Tornado device */ + if (deviceID == 0x07000200) { + number_uarts = ioread8(p + 4); + board->num_ports = number_uarts; + printk(KERN_DEBUG + "%d ports detected on Oxford PCI Express device\n", + number_uarts); + } + pci_iounmap(dev, p); + return 0; +} + struct serial_private * pciserial_init_ports(struct pci_dev *dev, struct pciserial_board *board) { @@ -1821,6 +1895,13 @@ pciserial_init_ports(struct pci_dev *dev, struct pciserial_board *board) struct pci_serial_quirk *quirk; int rc, nr_ports, i; + /* + * Find number of ports on board + */ + if (dev->vendor == PCI_VENDOR_ID_OXSEMI || + dev->vendor == PCI_VENDOR_ID_MAINPINE) + pci_oxsemi_tornado_init(dev, board); + nr_ports = board->num_ports; /* @@ -2301,6 +2382,156 @@ static struct pci_device_id serial_pci_tbl[] = { pbn_b0_bt_2_921600 }, /* + * Oxford Semiconductor Inc. Tornado PCI express device range. + */ + { PCI_VENDOR_ID_OXSEMI, 0xc101, /* OXPCIe952 1 Legacy UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc105, /* OXPCIe952 1 Legacy UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc11b, /* OXPCIe952 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc11f, /* OXPCIe952 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc120, /* OXPCIe952 1 Legacy UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc124, /* OXPCIe952 1 Legacy UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc138, /* OXPCIe952 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc13d, /* OXPCIe952 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc140, /* OXPCIe952 1 Legacy UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc141, /* OXPCIe952 1 Legacy UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc144, /* OXPCIe952 1 Legacy UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc145, /* OXPCIe952 1 Legacy UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc158, /* OXPCIe952 2 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_2_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc15d, /* OXPCIe952 2 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_2_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc208, /* OXPCIe954 4 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_4_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc20d, /* OXPCIe954 4 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_4_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc308, /* OXPCIe958 8 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_8_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc30d, /* OXPCIe958 8 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_8_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc40b, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc40f, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc41b, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc41f, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc42b, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc42f, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc43b, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc43f, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc44b, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc44f, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc45b, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc45f, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc46b, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc46f, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc47b, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc47f, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc48b, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc48f, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc49b, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc49f, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc4ab, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc4af, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc4bb, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc4bf, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc4cb, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc4cf, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + /* + * Mainpine Inc. IQ Express "Rev3" utilizing OxSemi Tornado + */ + { PCI_VENDOR_ID_MAINPINE, 0x4000, /* IQ Express 1 Port V.34 Super-G3 Fax */ + PCI_VENDOR_ID_MAINPINE, 0x4001, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_MAINPINE, 0x4000, /* IQ Express 2 Port V.34 Super-G3 Fax */ + PCI_VENDOR_ID_MAINPINE, 0x4002, 0, 0, + pbn_oxsemi_2_4000000 }, + { PCI_VENDOR_ID_MAINPINE, 0x4000, /* IQ Express 4 Port V.34 Super-G3 Fax */ + PCI_VENDOR_ID_MAINPINE, 0x4004, 0, 0, + pbn_oxsemi_4_4000000 }, + { PCI_VENDOR_ID_MAINPINE, 0x4000, /* IQ Express 8 Port V.34 Super-G3 Fax */ + PCI_VENDOR_ID_MAINPINE, 0x4008, 0, 0, + pbn_oxsemi_8_4000000 }, + /* * SBS Technologies, Inc. P-Octal and PMC-OCTPRO cards, * from skokodyn@yahoo.com */ diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig index db783b77a881..c94d3c4b7521 100644 --- a/drivers/serial/Kconfig +++ b/drivers/serial/Kconfig @@ -457,7 +457,7 @@ config SERIAL_SAMSUNG config SERIAL_SAMSUNG_DEBUG bool "Samsung SoC serial debug" - depends on SERIAL_SAMSUNG + depends on SERIAL_SAMSUNG && DEBUG_LL help Add support for debugging the serial driver. Since this is generally being used as a console, we use our own output diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig index 2a79decd7dfc..c4eff44c9f27 100644 --- a/drivers/staging/Kconfig +++ b/drivers/staging/Kconfig @@ -43,4 +43,8 @@ source "drivers/staging/echo/Kconfig" source "drivers/staging/at76_usb/Kconfig" +source "drivers/staging/pcc-acpi/Kconfig" + +source "drivers/staging/poch/Kconfig" + endif # STAGING diff --git a/drivers/staging/Makefile b/drivers/staging/Makefile index 325bca4f71c0..7cb8701d96d4 100644 --- a/drivers/staging/Makefile +++ b/drivers/staging/Makefile @@ -13,3 +13,5 @@ obj-$(CONFIG_W35UND) += winbond/ obj-$(CONFIG_PRISM2_USB) += wlan-ng/ obj-$(CONFIG_ECHO) += echo/ obj-$(CONFIG_USB_ATMEL) += at76_usb/ +obj-$(CONFIG_PCC_ACPI) += pcc-acpi/ +obj-$(CONFIG_POCH) += poch/ diff --git a/drivers/staging/at76_usb/at76_usb.c b/drivers/staging/at76_usb/at76_usb.c index 52df0c665183..174e2bec9223 100644 --- a/drivers/staging/at76_usb/at76_usb.c +++ b/drivers/staging/at76_usb/at76_usb.c @@ -2319,9 +2319,11 @@ static int at76_iw_handler_get_scan(struct net_device *netdev, if (!iwe) return -ENOMEM; - if (priv->scan_state != SCAN_COMPLETED) + if (priv->scan_state != SCAN_COMPLETED) { /* scan not yet finished */ + kfree(iwe); return -EAGAIN; + } spin_lock_irqsave(&priv->bss_list_spinlock, flags); diff --git a/drivers/staging/echo/bit_operations.h b/drivers/staging/echo/bit_operations.h index b32f4bf99397..cecdcf3fd755 100644 --- a/drivers/staging/echo/bit_operations.h +++ b/drivers/staging/echo/bit_operations.h @@ -30,114 +30,98 @@ #if !defined(_BIT_OPERATIONS_H_) #define _BIT_OPERATIONS_H_ -#ifdef __cplusplus -extern "C" { -#endif - #if defined(__i386__) || defined(__x86_64__) /*! \brief Find the bit position of the highest set bit in a word \param bits The word to be searched \return The bit number of the highest set bit, or -1 if the word is zero. */ static __inline__ int top_bit(unsigned int bits) { - int res; - - __asm__ (" xorl %[res],%[res];\n" - " decl %[res];\n" - " bsrl %[bits],%[res]\n" - : [res] "=&r" (res) - : [bits] "rm" (bits)); - return res; + int res; + + __asm__(" xorl %[res],%[res];\n" + " decl %[res];\n" + " bsrl %[bits],%[res]\n" + :[res] "=&r" (res) + :[bits] "rm"(bits) + ); + return res; } -/*- End of function --------------------------------------------------------*/ /*! \brief Find the bit position of the lowest set bit in a word \param bits The word to be searched \return The bit number of the lowest set bit, or -1 if the word is zero. */ static __inline__ int bottom_bit(unsigned int bits) { - int res; - - __asm__ (" xorl %[res],%[res];\n" - " decl %[res];\n" - " bsfl %[bits],%[res]\n" - : [res] "=&r" (res) - : [bits] "rm" (bits)); - return res; + int res; + + __asm__(" xorl %[res],%[res];\n" + " decl %[res];\n" + " bsfl %[bits],%[res]\n" + :[res] "=&r" (res) + :[bits] "rm"(bits) + ); + return res; } -/*- End of function --------------------------------------------------------*/ #else static __inline__ int top_bit(unsigned int bits) { - int i; - - if (bits == 0) - return -1; - i = 0; - if (bits & 0xFFFF0000) - { - bits &= 0xFFFF0000; - i += 16; - } - if (bits & 0xFF00FF00) - { - bits &= 0xFF00FF00; - i += 8; - } - if (bits & 0xF0F0F0F0) - { - bits &= 0xF0F0F0F0; - i += 4; - } - if (bits & 0xCCCCCCCC) - { - bits &= 0xCCCCCCCC; - i += 2; - } - if (bits & 0xAAAAAAAA) - { - bits &= 0xAAAAAAAA; - i += 1; - } - return i; + int i; + + if (bits == 0) + return -1; + i = 0; + if (bits & 0xFFFF0000) { + bits &= 0xFFFF0000; + i += 16; + } + if (bits & 0xFF00FF00) { + bits &= 0xFF00FF00; + i += 8; + } + if (bits & 0xF0F0F0F0) { + bits &= 0xF0F0F0F0; + i += 4; + } + if (bits & 0xCCCCCCCC) { + bits &= 0xCCCCCCCC; + i += 2; + } + if (bits & 0xAAAAAAAA) { + bits &= 0xAAAAAAAA; + i += 1; + } + return i; } -/*- End of function --------------------------------------------------------*/ static __inline__ int bottom_bit(unsigned int bits) { - int i; - - if (bits == 0) - return -1; - i = 32; - if (bits & 0x0000FFFF) - { - bits &= 0x0000FFFF; - i -= 16; - } - if (bits & 0x00FF00FF) - { - bits &= 0x00FF00FF; - i -= 8; - } - if (bits & 0x0F0F0F0F) - { - bits &= 0x0F0F0F0F; - i -= 4; - } - if (bits & 0x33333333) - { - bits &= 0x33333333; - i -= 2; - } - if (bits & 0x55555555) - { - bits &= 0x55555555; - i -= 1; - } - return i; + int i; + + if (bits == 0) + return -1; + i = 32; + if (bits & 0x0000FFFF) { + bits &= 0x0000FFFF; + i -= 16; + } + if (bits & 0x00FF00FF) { + bits &= 0x00FF00FF; + i -= 8; + } + if (bits & 0x0F0F0F0F) { + bits &= 0x0F0F0F0F; + i -= 4; + } + if (bits & 0x33333333) { + bits &= 0x33333333; + i -= 2; + } + if (bits & 0x55555555) { + bits &= 0x55555555; + i -= 1; + } + return i; } -/*- End of function --------------------------------------------------------*/ #endif /*! \brief Bit reverse a byte. @@ -146,16 +130,16 @@ static __inline__ int bottom_bit(unsigned int bits) static __inline__ uint8_t bit_reverse8(uint8_t x) { #if defined(__i386__) || defined(__x86_64__) - /* If multiply is fast */ - return ((x*0x0802U & 0x22110U) | (x*0x8020U & 0x88440U))*0x10101U >> 16; + /* If multiply is fast */ + return ((x * 0x0802U & 0x22110U) | (x * 0x8020U & 0x88440U)) * + 0x10101U >> 16; #else - /* If multiply is slow, but we have a barrel shifter */ - x = (x >> 4) | (x << 4); - x = ((x & 0xCC) >> 2) | ((x & 0x33) << 2); - return ((x & 0xAA) >> 1) | ((x & 0x55) << 1); + /* If multiply is slow, but we have a barrel shifter */ + x = (x >> 4) | (x << 4); + x = ((x & 0xCC) >> 2) | ((x & 0x33) << 2); + return ((x & 0xAA) >> 1) | ((x & 0x55) << 1); #endif } -/*- End of function --------------------------------------------------------*/ /*! \brief Bit reverse a 16 bit word. \param data The word to be reversed. @@ -193,9 +177,8 @@ uint16_t make_mask16(uint16_t x); \return The word with the single set bit. */ static __inline__ uint32_t least_significant_one32(uint32_t x) { - return (x & (-(int32_t) x)); + return (x & (-(int32_t) x)); } -/*- End of function --------------------------------------------------------*/ /*! \brief Find the most significant one in a word, and return a word with just that bit set. @@ -204,50 +187,42 @@ static __inline__ uint32_t least_significant_one32(uint32_t x) static __inline__ uint32_t most_significant_one32(uint32_t x) { #if defined(__i386__) || defined(__x86_64__) - return 1 << top_bit(x); + return 1 << top_bit(x); #else - x = make_mask32(x); - return (x ^ (x >> 1)); + x = make_mask32(x); + return (x ^ (x >> 1)); #endif } -/*- End of function --------------------------------------------------------*/ /*! \brief Find the parity of a byte. \param x The byte to be checked. \return 1 for odd, or 0 for even. */ static __inline__ int parity8(uint8_t x) { - x = (x ^ (x >> 4)) & 0x0F; - return (0x6996 >> x) & 1; + x = (x ^ (x >> 4)) & 0x0F; + return (0x6996 >> x) & 1; } -/*- End of function --------------------------------------------------------*/ /*! \brief Find the parity of a 16 bit word. \param x The word to be checked. \return 1 for odd, or 0 for even. */ static __inline__ int parity16(uint16_t x) { - x ^= (x >> 8); - x = (x ^ (x >> 4)) & 0x0F; - return (0x6996 >> x) & 1; + x ^= (x >> 8); + x = (x ^ (x >> 4)) & 0x0F; + return (0x6996 >> x) & 1; } -/*- End of function --------------------------------------------------------*/ /*! \brief Find the parity of a 32 bit word. \param x The word to be checked. \return 1 for odd, or 0 for even. */ static __inline__ int parity32(uint32_t x) { - x ^= (x >> 16); - x ^= (x >> 8); - x = (x ^ (x >> 4)) & 0x0F; - return (0x6996 >> x) & 1; + x ^= (x >> 16); + x ^= (x >> 8); + x = (x ^ (x >> 4)) & 0x0F; + return (0x6996 >> x) & 1; } -/*- End of function --------------------------------------------------------*/ - -#ifdef __cplusplus -} -#endif #endif /*- End of file ------------------------------------------------------------*/ diff --git a/drivers/staging/echo/echo.c b/drivers/staging/echo/echo.c index 4a281b14fc58..b8f2c5e9dee5 100644 --- a/drivers/staging/echo/echo.c +++ b/drivers/staging/echo/echo.c @@ -74,7 +74,6 @@ Steve also has some nice notes on echo cancellers in echo.h - References: [1] Ochiai, Areseki, and Ogihara, "Echo Canceller with Two Echo @@ -105,20 +104,18 @@ Mark, Pawel, and Pavel. */ -#include <linux/kernel.h> /* We're doing kernel work */ +#include <linux/kernel.h> /* We're doing kernel work */ #include <linux/module.h> #include <linux/kernel.h> #include <linux/slab.h> -#define malloc(a) kmalloc((a), GFP_KERNEL) -#define free(a) kfree(a) #include "bit_operations.h" #include "echo.h" #define MIN_TX_POWER_FOR_ADAPTION 64 #define MIN_RX_POWER_FOR_ADAPTION 64 -#define DTD_HANGOVER 600 /* 600 samples, or 75ms */ -#define DC_LOG2BETA 3 /* log2() of DC filter Beta */ +#define DTD_HANGOVER 600 /* 600 samples, or 75ms */ +#define DC_LOG2BETA 3 /* log2() of DC filter Beta */ /*-----------------------------------------------------------------------*\ FUNCTIONS @@ -126,59 +123,58 @@ /* adapting coeffs using the traditional stochastic descent (N)LMS algorithm */ - -#ifdef __BLACKFIN_ASM__ -static void __inline__ lms_adapt_bg(echo_can_state_t *ec, int clean, int shift) +#ifdef __bfin__ +static void __inline__ lms_adapt_bg(struct oslec_state *ec, int clean, + int shift) { - int i, j; - int offset1; - int offset2; - int factor; - int exp; - int16_t *phist; - int n; - - if (shift > 0) - factor = clean << shift; - else - factor = clean >> -shift; - - /* Update the FIR taps */ - - offset2 = ec->curr_pos; - offset1 = ec->taps - offset2; - phist = &ec->fir_state_bg.history[offset2]; - - /* st: and en: help us locate the assembler in echo.s */ - - //asm("st:"); - n = ec->taps; - for (i = 0, j = offset2; i < n; i++, j++) - { - exp = *phist++ * factor; - ec->fir_taps16[1][i] += (int16_t) ((exp+(1<<14)) >> 15); - } - //asm("en:"); - - /* Note the asm for the inner loop above generated by Blackfin gcc - 4.1.1 is pretty good (note even parallel instructions used): - - R0 = W [P0++] (X); - R0 *= R2; - R0 = R0 + R3 (NS) || - R1 = W [P1] (X) || - nop; - R0 >>>= 15; - R0 = R0 + R1; - W [P1++] = R0; - - A block based update algorithm would be much faster but the - above can't be improved on much. Every instruction saved in - the loop above is 2 MIPs/ch! The for loop above is where the - Blackfin spends most of it's time - about 17 MIPs/ch measured - with speedtest.c with 256 taps (32ms). Write-back and - Write-through cache gave about the same performance. - */ + int i, j; + int offset1; + int offset2; + int factor; + int exp; + int16_t *phist; + int n; + + if (shift > 0) + factor = clean << shift; + else + factor = clean >> -shift; + + /* Update the FIR taps */ + + offset2 = ec->curr_pos; + offset1 = ec->taps - offset2; + phist = &ec->fir_state_bg.history[offset2]; + + /* st: and en: help us locate the assembler in echo.s */ + + //asm("st:"); + n = ec->taps; + for (i = 0, j = offset2; i < n; i++, j++) { + exp = *phist++ * factor; + ec->fir_taps16[1][i] += (int16_t) ((exp + (1 << 14)) >> 15); + } + //asm("en:"); + + /* Note the asm for the inner loop above generated by Blackfin gcc + 4.1.1 is pretty good (note even parallel instructions used): + + R0 = W [P0++] (X); + R0 *= R2; + R0 = R0 + R3 (NS) || + R1 = W [P1] (X) || + nop; + R0 >>>= 15; + R0 = R0 + R1; + W [P1++] = R0; + + A block based update algorithm would be much faster but the + above can't be improved on much. Every instruction saved in + the loop above is 2 MIPs/ch! The for loop above is where the + Blackfin spends most of it's time - about 17 MIPs/ch measured + with speedtest.c with 256 taps (32ms). Write-back and + Write-through cache gave about the same performance. + */ } /* @@ -200,392 +196,393 @@ static void __inline__ lms_adapt_bg(echo_can_state_t *ec, int clean, int shift) */ #else -static __inline__ void lms_adapt_bg(echo_can_state_t *ec, int clean, int shift) +static __inline__ void lms_adapt_bg(struct oslec_state *ec, int clean, + int shift) { - int i; - - int offset1; - int offset2; - int factor; - int exp; - - if (shift > 0) - factor = clean << shift; - else - factor = clean >> -shift; - - /* Update the FIR taps */ - - offset2 = ec->curr_pos; - offset1 = ec->taps - offset2; - - for (i = ec->taps - 1; i >= offset1; i--) - { - exp = (ec->fir_state_bg.history[i - offset1]*factor); - ec->fir_taps16[1][i] += (int16_t) ((exp+(1<<14)) >> 15); - } - for ( ; i >= 0; i--) - { - exp = (ec->fir_state_bg.history[i + offset2]*factor); - ec->fir_taps16[1][i] += (int16_t) ((exp+(1<<14)) >> 15); - } + int i; + + int offset1; + int offset2; + int factor; + int exp; + + if (shift > 0) + factor = clean << shift; + else + factor = clean >> -shift; + + /* Update the FIR taps */ + + offset2 = ec->curr_pos; + offset1 = ec->taps - offset2; + + for (i = ec->taps - 1; i >= offset1; i--) { + exp = (ec->fir_state_bg.history[i - offset1] * factor); + ec->fir_taps16[1][i] += (int16_t) ((exp + (1 << 14)) >> 15); + } + for (; i >= 0; i--) { + exp = (ec->fir_state_bg.history[i + offset2] * factor); + ec->fir_taps16[1][i] += (int16_t) ((exp + (1 << 14)) >> 15); + } } #endif -/*- End of function --------------------------------------------------------*/ - -echo_can_state_t *echo_can_create(int len, int adaption_mode) +struct oslec_state *oslec_create(int len, int adaption_mode) { - echo_can_state_t *ec; - int i; - int j; - - ec = kmalloc(sizeof(*ec), GFP_KERNEL); - if (ec == NULL) - return NULL; - memset(ec, 0, sizeof(*ec)); - - ec->taps = len; - ec->log2taps = top_bit(len); - ec->curr_pos = ec->taps - 1; - - for (i = 0; i < 2; i++) - { - if ((ec->fir_taps16[i] = (int16_t *) malloc((ec->taps)*sizeof(int16_t))) == NULL) - { - for (j = 0; j < i; j++) - kfree(ec->fir_taps16[j]); - kfree(ec); - return NULL; - } - memset(ec->fir_taps16[i], 0, (ec->taps)*sizeof(int16_t)); - } - - fir16_create(&ec->fir_state, - ec->fir_taps16[0], - ec->taps); - fir16_create(&ec->fir_state_bg, - ec->fir_taps16[1], - ec->taps); - - for(i=0; i<5; i++) { - ec->xvtx[i] = ec->yvtx[i] = ec->xvrx[i] = ec->yvrx[i] = 0; - } - - ec->cng_level = 1000; - echo_can_adaption_mode(ec, adaption_mode); - - ec->snapshot = (int16_t*)malloc(ec->taps*sizeof(int16_t)); - memset(ec->snapshot, 0, sizeof(int16_t)*ec->taps); - - ec->cond_met = 0; - ec->Pstates = 0; - ec->Ltxacc = ec->Lrxacc = ec->Lcleanacc = ec->Lclean_bgacc = 0; - ec->Ltx = ec->Lrx = ec->Lclean = ec->Lclean_bg = 0; - ec->tx_1 = ec->tx_2 = ec->rx_1 = ec->rx_2 = 0; - ec->Lbgn = ec->Lbgn_acc = 0; - ec->Lbgn_upper = 200; - ec->Lbgn_upper_acc = ec->Lbgn_upper << 13; - - return ec; + struct oslec_state *ec; + int i; + + ec = kzalloc(sizeof(*ec), GFP_KERNEL); + if (!ec) + return NULL; + + ec->taps = len; + ec->log2taps = top_bit(len); + ec->curr_pos = ec->taps - 1; + + for (i = 0; i < 2; i++) { + ec->fir_taps16[i] = + kcalloc(ec->taps, sizeof(int16_t), GFP_KERNEL); + if (!ec->fir_taps16[i]) + goto error_oom; + } + + fir16_create(&ec->fir_state, ec->fir_taps16[0], ec->taps); + fir16_create(&ec->fir_state_bg, ec->fir_taps16[1], ec->taps); + + for (i = 0; i < 5; i++) { + ec->xvtx[i] = ec->yvtx[i] = ec->xvrx[i] = ec->yvrx[i] = 0; + } + + ec->cng_level = 1000; + oslec_adaption_mode(ec, adaption_mode); + + ec->snapshot = kcalloc(ec->taps, sizeof(int16_t), GFP_KERNEL); + if (!ec->snapshot) + goto error_oom; + + ec->cond_met = 0; + ec->Pstates = 0; + ec->Ltxacc = ec->Lrxacc = ec->Lcleanacc = ec->Lclean_bgacc = 0; + ec->Ltx = ec->Lrx = ec->Lclean = ec->Lclean_bg = 0; + ec->tx_1 = ec->tx_2 = ec->rx_1 = ec->rx_2 = 0; + ec->Lbgn = ec->Lbgn_acc = 0; + ec->Lbgn_upper = 200; + ec->Lbgn_upper_acc = ec->Lbgn_upper << 13; + + return ec; + + error_oom: + for (i = 0; i < 2; i++) + kfree(ec->fir_taps16[i]); + + kfree(ec); + return NULL; } -/*- End of function --------------------------------------------------------*/ -void echo_can_free(echo_can_state_t *ec) +EXPORT_SYMBOL_GPL(oslec_create); + +void oslec_free(struct oslec_state *ec) { int i; fir16_free(&ec->fir_state); fir16_free(&ec->fir_state_bg); - for (i = 0; i < 2; i++) + for (i = 0; i < 2; i++) kfree(ec->fir_taps16[i]); kfree(ec->snapshot); kfree(ec); } -/*- End of function --------------------------------------------------------*/ -void echo_can_adaption_mode(echo_can_state_t *ec, int adaption_mode) +EXPORT_SYMBOL_GPL(oslec_free); + +void oslec_adaption_mode(struct oslec_state *ec, int adaption_mode) { - ec->adaption_mode = adaption_mode; + ec->adaption_mode = adaption_mode; } -/*- End of function --------------------------------------------------------*/ -void echo_can_flush(echo_can_state_t *ec) +EXPORT_SYMBOL_GPL(oslec_adaption_mode); + +void oslec_flush(struct oslec_state *ec) { - int i; + int i; - ec->Ltxacc = ec->Lrxacc = ec->Lcleanacc = ec->Lclean_bgacc = 0; - ec->Ltx = ec->Lrx = ec->Lclean = ec->Lclean_bg = 0; - ec->tx_1 = ec->tx_2 = ec->rx_1 = ec->rx_2 = 0; + ec->Ltxacc = ec->Lrxacc = ec->Lcleanacc = ec->Lclean_bgacc = 0; + ec->Ltx = ec->Lrx = ec->Lclean = ec->Lclean_bg = 0; + ec->tx_1 = ec->tx_2 = ec->rx_1 = ec->rx_2 = 0; - ec->Lbgn = ec->Lbgn_acc = 0; - ec->Lbgn_upper = 200; - ec->Lbgn_upper_acc = ec->Lbgn_upper << 13; + ec->Lbgn = ec->Lbgn_acc = 0; + ec->Lbgn_upper = 200; + ec->Lbgn_upper_acc = ec->Lbgn_upper << 13; - ec->nonupdate_dwell = 0; + ec->nonupdate_dwell = 0; - fir16_flush(&ec->fir_state); - fir16_flush(&ec->fir_state_bg); - ec->fir_state.curr_pos = ec->taps - 1; - ec->fir_state_bg.curr_pos = ec->taps - 1; - for (i = 0; i < 2; i++) - memset(ec->fir_taps16[i], 0, ec->taps*sizeof(int16_t)); + fir16_flush(&ec->fir_state); + fir16_flush(&ec->fir_state_bg); + ec->fir_state.curr_pos = ec->taps - 1; + ec->fir_state_bg.curr_pos = ec->taps - 1; + for (i = 0; i < 2; i++) + memset(ec->fir_taps16[i], 0, ec->taps * sizeof(int16_t)); - ec->curr_pos = ec->taps - 1; - ec->Pstates = 0; + ec->curr_pos = ec->taps - 1; + ec->Pstates = 0; } -/*- End of function --------------------------------------------------------*/ -void echo_can_snapshot(echo_can_state_t *ec) { - memcpy(ec->snapshot, ec->fir_taps16[0], ec->taps*sizeof(int16_t)); +EXPORT_SYMBOL_GPL(oslec_flush); + +void oslec_snapshot(struct oslec_state *ec) +{ + memcpy(ec->snapshot, ec->fir_taps16[0], ec->taps * sizeof(int16_t)); } -/*- End of function --------------------------------------------------------*/ + +EXPORT_SYMBOL_GPL(oslec_snapshot); /* Dual Path Echo Canceller ------------------------------------------------*/ -int16_t echo_can_update(echo_can_state_t *ec, int16_t tx, int16_t rx) +int16_t oslec_update(struct oslec_state *ec, int16_t tx, int16_t rx) { - int32_t echo_value; - int clean_bg; - int tmp, tmp1; - - /* Input scaling was found be required to prevent problems when tx - starts clipping. Another possible way to handle this would be the - filter coefficent scaling. */ - - ec->tx = tx; ec->rx = rx; - tx >>=1; - rx >>=1; - - /* - Filter DC, 3dB point is 160Hz (I think), note 32 bit precision required - otherwise values do not track down to 0. Zero at DC, Pole at (1-Beta) - only real axis. Some chip sets (like Si labs) don't need - this, but something like a $10 X100P card does. Any DC really slows - down convergence. - - Note: removes some low frequency from the signal, this reduces - the speech quality when listening to samples through headphones - but may not be obvious through a telephone handset. - - Note that the 3dB frequency in radians is approx Beta, e.g. for - Beta = 2^(-3) = 0.125, 3dB freq is 0.125 rads = 159Hz. - */ - - if (ec->adaption_mode & ECHO_CAN_USE_RX_HPF) { - tmp = rx << 15; + int32_t echo_value; + int clean_bg; + int tmp, tmp1; + + /* Input scaling was found be required to prevent problems when tx + starts clipping. Another possible way to handle this would be the + filter coefficent scaling. */ + + ec->tx = tx; + ec->rx = rx; + tx >>= 1; + rx >>= 1; + + /* + Filter DC, 3dB point is 160Hz (I think), note 32 bit precision required + otherwise values do not track down to 0. Zero at DC, Pole at (1-Beta) + only real axis. Some chip sets (like Si labs) don't need + this, but something like a $10 X100P card does. Any DC really slows + down convergence. + + Note: removes some low frequency from the signal, this reduces + the speech quality when listening to samples through headphones + but may not be obvious through a telephone handset. + + Note that the 3dB frequency in radians is approx Beta, e.g. for + Beta = 2^(-3) = 0.125, 3dB freq is 0.125 rads = 159Hz. + */ + + if (ec->adaption_mode & ECHO_CAN_USE_RX_HPF) { + tmp = rx << 15; #if 1 - /* Make sure the gain of the HPF is 1.0. This can still saturate a little under - impulse conditions, and it might roll to 32768 and need clipping on sustained peak - level signals. However, the scale of such clipping is small, and the error due to - any saturation should not markedly affect the downstream processing. */ - tmp -= (tmp >> 4); + /* Make sure the gain of the HPF is 1.0. This can still saturate a little under + impulse conditions, and it might roll to 32768 and need clipping on sustained peak + level signals. However, the scale of such clipping is small, and the error due to + any saturation should not markedly affect the downstream processing. */ + tmp -= (tmp >> 4); #endif - ec->rx_1 += -(ec->rx_1>>DC_LOG2BETA) + tmp - ec->rx_2; + ec->rx_1 += -(ec->rx_1 >> DC_LOG2BETA) + tmp - ec->rx_2; + + /* hard limit filter to prevent clipping. Note that at this stage + rx should be limited to +/- 16383 due to right shift above */ + tmp1 = ec->rx_1 >> 15; + if (tmp1 > 16383) + tmp1 = 16383; + if (tmp1 < -16383) + tmp1 = -16383; + rx = tmp1; + ec->rx_2 = tmp; + } - /* hard limit filter to prevent clipping. Note that at this stage - rx should be limited to +/- 16383 due to right shift above */ - tmp1 = ec->rx_1 >> 15; - if (tmp1 > 16383) tmp1 = 16383; - if (tmp1 < -16383) tmp1 = -16383; - rx = tmp1; - ec->rx_2 = tmp; - } + /* Block average of power in the filter states. Used for + adaption power calculation. */ - /* Block average of power in the filter states. Used for - adaption power calculation. */ + { + int new, old; + + /* efficient "out with the old and in with the new" algorithm so + we don't have to recalculate over the whole block of + samples. */ + new = (int)tx *(int)tx; + old = (int)ec->fir_state.history[ec->fir_state.curr_pos] * + (int)ec->fir_state.history[ec->fir_state.curr_pos]; + ec->Pstates += + ((new - old) + (1 << ec->log2taps)) >> ec->log2taps; + if (ec->Pstates < 0) + ec->Pstates = 0; + } - { - int new, old; + /* Calculate short term average levels using simple single pole IIRs */ - /* efficient "out with the old and in with the new" algorithm so - we don't have to recalculate over the whole block of - samples. */ - new = (int)tx * (int)tx; - old = (int)ec->fir_state.history[ec->fir_state.curr_pos] * - (int)ec->fir_state.history[ec->fir_state.curr_pos]; - ec->Pstates += ((new - old) + (1<<ec->log2taps)) >> ec->log2taps; - if (ec->Pstates < 0) ec->Pstates = 0; - } - - /* Calculate short term average levels using simple single pole IIRs */ - - ec->Ltxacc += abs(tx) - ec->Ltx; - ec->Ltx = (ec->Ltxacc + (1<<4)) >> 5; - ec->Lrxacc += abs(rx) - ec->Lrx; - ec->Lrx = (ec->Lrxacc + (1<<4)) >> 5; - - /* Foreground filter ---------------------------------------------------*/ - - ec->fir_state.coeffs = ec->fir_taps16[0]; - echo_value = fir16(&ec->fir_state, tx); - ec->clean = rx - echo_value; - ec->Lcleanacc += abs(ec->clean) - ec->Lclean; - ec->Lclean = (ec->Lcleanacc + (1<<4)) >> 5; - - /* Background filter ---------------------------------------------------*/ - - echo_value = fir16(&ec->fir_state_bg, tx); - clean_bg = rx - echo_value; - ec->Lclean_bgacc += abs(clean_bg) - ec->Lclean_bg; - ec->Lclean_bg = (ec->Lclean_bgacc + (1<<4)) >> 5; - - /* Background Filter adaption -----------------------------------------*/ - - /* Almost always adap bg filter, just simple DT and energy - detection to minimise adaption in cases of strong double talk. - However this is not critical for the dual path algorithm. - */ - ec->factor = 0; - ec->shift = 0; - if ((ec->nonupdate_dwell == 0)) { - int P, logP, shift; - - /* Determine: - - f = Beta * clean_bg_rx/P ------ (1) - - where P is the total power in the filter states. - - The Boffins have shown that if we obey (1) we converge - quickly and avoid instability. - - The correct factor f must be in Q30, as this is the fixed - point format required by the lms_adapt_bg() function, - therefore the scaled version of (1) is: - - (2^30) * f = (2^30) * Beta * clean_bg_rx/P - factor = (2^30) * Beta * clean_bg_rx/P ----- (2) - - We have chosen Beta = 0.25 by experiment, so: - - factor = (2^30) * (2^-2) * clean_bg_rx/P - - (30 - 2 - log2(P)) - factor = clean_bg_rx 2 ----- (3) - - To avoid a divide we approximate log2(P) as top_bit(P), - which returns the position of the highest non-zero bit in - P. This approximation introduces an error as large as a - factor of 2, but the algorithm seems to handle it OK. - - Come to think of it a divide may not be a big deal on a - modern DSP, so its probably worth checking out the cycles - for a divide versus a top_bit() implementation. - */ - - P = MIN_TX_POWER_FOR_ADAPTION + ec->Pstates; - logP = top_bit(P) + ec->log2taps; - shift = 30 - 2 - logP; - ec->shift = shift; - - lms_adapt_bg(ec, clean_bg, shift); - } - - /* very simple DTD to make sure we dont try and adapt with strong - near end speech */ - - ec->adapt = 0; - if ((ec->Lrx > MIN_RX_POWER_FOR_ADAPTION) && (ec->Lrx > ec->Ltx)) - ec->nonupdate_dwell = DTD_HANGOVER; - if (ec->nonupdate_dwell) - ec->nonupdate_dwell--; + ec->Ltxacc += abs(tx) - ec->Ltx; + ec->Ltx = (ec->Ltxacc + (1 << 4)) >> 5; + ec->Lrxacc += abs(rx) - ec->Lrx; + ec->Lrx = (ec->Lrxacc + (1 << 4)) >> 5; - /* Transfer logic ------------------------------------------------------*/ + /* Foreground filter --------------------------------------------------- */ - /* These conditions are from the dual path paper [1], I messed with - them a bit to improve performance. */ + ec->fir_state.coeffs = ec->fir_taps16[0]; + echo_value = fir16(&ec->fir_state, tx); + ec->clean = rx - echo_value; + ec->Lcleanacc += abs(ec->clean) - ec->Lclean; + ec->Lclean = (ec->Lcleanacc + (1 << 4)) >> 5; - if ((ec->adaption_mode & ECHO_CAN_USE_ADAPTION) && - (ec->nonupdate_dwell == 0) && - (8*ec->Lclean_bg < 7*ec->Lclean) /* (ec->Lclean_bg < 0.875*ec->Lclean) */ && - (8*ec->Lclean_bg < ec->Ltx) /* (ec->Lclean_bg < 0.125*ec->Ltx) */ ) - { - if (ec->cond_met == 6) { - /* BG filter has had better results for 6 consecutive samples */ - ec->adapt = 1; - memcpy(ec->fir_taps16[0], ec->fir_taps16[1], ec->taps*sizeof(int16_t)); - } - else - ec->cond_met++; - } - else - ec->cond_met = 0; + /* Background filter --------------------------------------------------- */ - /* Non-Linear Processing ---------------------------------------------------*/ + echo_value = fir16(&ec->fir_state_bg, tx); + clean_bg = rx - echo_value; + ec->Lclean_bgacc += abs(clean_bg) - ec->Lclean_bg; + ec->Lclean_bg = (ec->Lclean_bgacc + (1 << 4)) >> 5; - ec->clean_nlp = ec->clean; - if (ec->adaption_mode & ECHO_CAN_USE_NLP) - { - /* Non-linear processor - a fancy way to say "zap small signals, to avoid - residual echo due to (uLaw/ALaw) non-linearity in the channel.". */ + /* Background Filter adaption ----------------------------------------- */ - if ((16*ec->Lclean < ec->Ltx)) - { - /* Our e/c has improved echo by at least 24 dB (each factor of 2 is 6dB, - so 2*2*2*2=16 is the same as 6+6+6+6=24dB) */ - if (ec->adaption_mode & ECHO_CAN_USE_CNG) - { - ec->cng_level = ec->Lbgn; - - /* Very elementary comfort noise generation. Just random - numbers rolled off very vaguely Hoth-like. DR: This - noise doesn't sound quite right to me - I suspect there - are some overlfow issues in the filtering as it's too - "crackly". TODO: debug this, maybe just play noise at - high level or look at spectrum. - */ - - ec->cng_rndnum = 1664525U*ec->cng_rndnum + 1013904223U; - ec->cng_filter = ((ec->cng_rndnum & 0xFFFF) - 32768 + 5*ec->cng_filter) >> 3; - ec->clean_nlp = (ec->cng_filter*ec->cng_level*8) >> 14; - - } - else if (ec->adaption_mode & ECHO_CAN_USE_CLIP) - { - /* This sounds much better than CNG */ - if (ec->clean_nlp > ec->Lbgn) - ec->clean_nlp = ec->Lbgn; - if (ec->clean_nlp < -ec->Lbgn) - ec->clean_nlp = -ec->Lbgn; + /* Almost always adap bg filter, just simple DT and energy + detection to minimise adaption in cases of strong double talk. + However this is not critical for the dual path algorithm. + */ + ec->factor = 0; + ec->shift = 0; + if ((ec->nonupdate_dwell == 0)) { + int P, logP, shift; + + /* Determine: + + f = Beta * clean_bg_rx/P ------ (1) + + where P is the total power in the filter states. + + The Boffins have shown that if we obey (1) we converge + quickly and avoid instability. + + The correct factor f must be in Q30, as this is the fixed + point format required by the lms_adapt_bg() function, + therefore the scaled version of (1) is: + + (2^30) * f = (2^30) * Beta * clean_bg_rx/P + factor = (2^30) * Beta * clean_bg_rx/P ----- (2) + + We have chosen Beta = 0.25 by experiment, so: + + factor = (2^30) * (2^-2) * clean_bg_rx/P + + (30 - 2 - log2(P)) + factor = clean_bg_rx 2 ----- (3) + + To avoid a divide we approximate log2(P) as top_bit(P), + which returns the position of the highest non-zero bit in + P. This approximation introduces an error as large as a + factor of 2, but the algorithm seems to handle it OK. + + Come to think of it a divide may not be a big deal on a + modern DSP, so its probably worth checking out the cycles + for a divide versus a top_bit() implementation. + */ + + P = MIN_TX_POWER_FOR_ADAPTION + ec->Pstates; + logP = top_bit(P) + ec->log2taps; + shift = 30 - 2 - logP; + ec->shift = shift; + + lms_adapt_bg(ec, clean_bg, shift); } - else - { - /* just mute the residual, doesn't sound very good, used mainly - in G168 tests */ - ec->clean_nlp = 0; - } - } - else { - /* Background noise estimator. I tried a few algorithms - here without much luck. This very simple one seems to - work best, we just average the level using a slow (1 sec - time const) filter if the current level is less than a - (experimentally derived) constant. This means we dont - include high level signals like near end speech. When - combined with CNG or especially CLIP seems to work OK. - */ - if (ec->Lclean < 40) { - ec->Lbgn_acc += abs(ec->clean) - ec->Lbgn; - ec->Lbgn = (ec->Lbgn_acc + (1<<11)) >> 12; - } - } - } - - /* Roll around the taps buffer */ - if (ec->curr_pos <= 0) - ec->curr_pos = ec->taps; - ec->curr_pos--; - - if (ec->adaption_mode & ECHO_CAN_DISABLE) - ec->clean_nlp = rx; - - /* Output scaled back up again to match input scaling */ - - return (int16_t) ec->clean_nlp << 1; + + /* very simple DTD to make sure we dont try and adapt with strong + near end speech */ + + ec->adapt = 0; + if ((ec->Lrx > MIN_RX_POWER_FOR_ADAPTION) && (ec->Lrx > ec->Ltx)) + ec->nonupdate_dwell = DTD_HANGOVER; + if (ec->nonupdate_dwell) + ec->nonupdate_dwell--; + + /* Transfer logic ------------------------------------------------------ */ + + /* These conditions are from the dual path paper [1], I messed with + them a bit to improve performance. */ + + if ((ec->adaption_mode & ECHO_CAN_USE_ADAPTION) && + (ec->nonupdate_dwell == 0) && + (8 * ec->Lclean_bg < + 7 * ec->Lclean) /* (ec->Lclean_bg < 0.875*ec->Lclean) */ && + (8 * ec->Lclean_bg < + ec->Ltx) /* (ec->Lclean_bg < 0.125*ec->Ltx) */ ) { + if (ec->cond_met == 6) { + /* BG filter has had better results for 6 consecutive samples */ + ec->adapt = 1; + memcpy(ec->fir_taps16[0], ec->fir_taps16[1], + ec->taps * sizeof(int16_t)); + } else + ec->cond_met++; + } else + ec->cond_met = 0; + + /* Non-Linear Processing --------------------------------------------------- */ + + ec->clean_nlp = ec->clean; + if (ec->adaption_mode & ECHO_CAN_USE_NLP) { + /* Non-linear processor - a fancy way to say "zap small signals, to avoid + residual echo due to (uLaw/ALaw) non-linearity in the channel.". */ + + if ((16 * ec->Lclean < ec->Ltx)) { + /* Our e/c has improved echo by at least 24 dB (each factor of 2 is 6dB, + so 2*2*2*2=16 is the same as 6+6+6+6=24dB) */ + if (ec->adaption_mode & ECHO_CAN_USE_CNG) { + ec->cng_level = ec->Lbgn; + + /* Very elementary comfort noise generation. Just random + numbers rolled off very vaguely Hoth-like. DR: This + noise doesn't sound quite right to me - I suspect there + are some overlfow issues in the filtering as it's too + "crackly". TODO: debug this, maybe just play noise at + high level or look at spectrum. + */ + + ec->cng_rndnum = + 1664525U * ec->cng_rndnum + 1013904223U; + ec->cng_filter = + ((ec->cng_rndnum & 0xFFFF) - 32768 + + 5 * ec->cng_filter) >> 3; + ec->clean_nlp = + (ec->cng_filter * ec->cng_level * 8) >> 14; + + } else if (ec->adaption_mode & ECHO_CAN_USE_CLIP) { + /* This sounds much better than CNG */ + if (ec->clean_nlp > ec->Lbgn) + ec->clean_nlp = ec->Lbgn; + if (ec->clean_nlp < -ec->Lbgn) + ec->clean_nlp = -ec->Lbgn; + } else { + /* just mute the residual, doesn't sound very good, used mainly + in G168 tests */ + ec->clean_nlp = 0; + } + } else { + /* Background noise estimator. I tried a few algorithms + here without much luck. This very simple one seems to + work best, we just average the level using a slow (1 sec + time const) filter if the current level is less than a + (experimentally derived) constant. This means we dont + include high level signals like near end speech. When + combined with CNG or especially CLIP seems to work OK. + */ + if (ec->Lclean < 40) { + ec->Lbgn_acc += abs(ec->clean) - ec->Lbgn; + ec->Lbgn = (ec->Lbgn_acc + (1 << 11)) >> 12; + } + } + } + + /* Roll around the taps buffer */ + if (ec->curr_pos <= 0) + ec->curr_pos = ec->taps; + ec->curr_pos--; + + if (ec->adaption_mode & ECHO_CAN_DISABLE) + ec->clean_nlp = rx; + + /* Output scaled back up again to match input scaling */ + + return (int16_t) ec->clean_nlp << 1; } -/*- End of function --------------------------------------------------------*/ +EXPORT_SYMBOL_GPL(oslec_update); /* This function is seperated from the echo canceller is it is usually called as part of the tx process. See rx HP (DC blocking) filter above, it's @@ -608,25 +605,35 @@ int16_t echo_can_update(echo_can_state_t *ec, int16_t tx, int16_t rx) precision, which noise shapes things, giving very clean DC removal. */ -int16_t echo_can_hpf_tx(echo_can_state_t *ec, int16_t tx) { - int tmp, tmp1; +int16_t oslec_hpf_tx(struct oslec_state * ec, int16_t tx) +{ + int tmp, tmp1; - if (ec->adaption_mode & ECHO_CAN_USE_TX_HPF) { - tmp = tx << 15; + if (ec->adaption_mode & ECHO_CAN_USE_TX_HPF) { + tmp = tx << 15; #if 1 - /* Make sure the gain of the HPF is 1.0. The first can still saturate a little under - impulse conditions, and it might roll to 32768 and need clipping on sustained peak - level signals. However, the scale of such clipping is small, and the error due to - any saturation should not markedly affect the downstream processing. */ - tmp -= (tmp >> 4); + /* Make sure the gain of the HPF is 1.0. The first can still saturate a little under + impulse conditions, and it might roll to 32768 and need clipping on sustained peak + level signals. However, the scale of such clipping is small, and the error due to + any saturation should not markedly affect the downstream processing. */ + tmp -= (tmp >> 4); #endif - ec->tx_1 += -(ec->tx_1>>DC_LOG2BETA) + tmp - ec->tx_2; - tmp1 = ec->tx_1 >> 15; - if (tmp1 > 32767) tmp1 = 32767; - if (tmp1 < -32767) tmp1 = -32767; - tx = tmp1; - ec->tx_2 = tmp; - } - - return tx; + ec->tx_1 += -(ec->tx_1 >> DC_LOG2BETA) + tmp - ec->tx_2; + tmp1 = ec->tx_1 >> 15; + if (tmp1 > 32767) + tmp1 = 32767; + if (tmp1 < -32767) + tmp1 = -32767; + tx = tmp1; + ec->tx_2 = tmp; + } + + return tx; } + +EXPORT_SYMBOL_GPL(oslec_hpf_tx); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("David Rowe"); +MODULE_DESCRIPTION("Open Source Line Echo Canceller"); +MODULE_VERSION("0.3.0"); diff --git a/drivers/staging/echo/echo.h b/drivers/staging/echo/echo.h index 7a91b4390f3b..9fb9543c4f13 100644 --- a/drivers/staging/echo/echo.h +++ b/drivers/staging/echo/echo.h @@ -118,23 +118,14 @@ a minor burden. */ #include "fir.h" - -/* Mask bits for the adaption mode */ -#define ECHO_CAN_USE_ADAPTION 0x01 -#define ECHO_CAN_USE_NLP 0x02 -#define ECHO_CAN_USE_CNG 0x04 -#define ECHO_CAN_USE_CLIP 0x08 -#define ECHO_CAN_USE_TX_HPF 0x10 -#define ECHO_CAN_USE_RX_HPF 0x20 -#define ECHO_CAN_DISABLE 0x40 +#include "oslec.h" /*! G.168 echo canceller descriptor. This defines the working state for a line echo canceller. */ -typedef struct -{ - int16_t tx,rx; +struct oslec_state { + int16_t tx, rx; int16_t clean; int16_t clean_nlp; @@ -176,45 +167,6 @@ typedef struct /* snapshot sample of coeffs used for development */ int16_t *snapshot; -} echo_can_state_t; - -/*! Create a voice echo canceller context. - \param len The length of the canceller, in samples. - \return The new canceller context, or NULL if the canceller could not be created. -*/ -echo_can_state_t *echo_can_create(int len, int adaption_mode); - -/*! Free a voice echo canceller context. - \param ec The echo canceller context. -*/ -void echo_can_free(echo_can_state_t *ec); - -/*! Flush (reinitialise) a voice echo canceller context. - \param ec The echo canceller context. -*/ -void echo_can_flush(echo_can_state_t *ec); - -/*! Set the adaption mode of a voice echo canceller context. - \param ec The echo canceller context. - \param adapt The mode. -*/ -void echo_can_adaption_mode(echo_can_state_t *ec, int adaption_mode); - -void echo_can_snapshot(echo_can_state_t *ec); - -/*! Process a sample through a voice echo canceller. - \param ec The echo canceller context. - \param tx The transmitted audio sample. - \param rx The received audio sample. - \return The clean (echo cancelled) received sample. -*/ -int16_t echo_can_update(echo_can_state_t *ec, int16_t tx, int16_t rx); - -/*! Process to high pass filter the tx signal. - \param ec The echo canceller context. - \param tx The transmitted auio sample. - \return The HP filtered transmit sample, send this to your D/A. -*/ -int16_t echo_can_hpf_tx(echo_can_state_t *ec, int16_t tx); +}; -#endif /* __ECHO_H */ +#endif /* __ECHO_H */ diff --git a/drivers/staging/echo/fir.h b/drivers/staging/echo/fir.h index e1bfc4994886..5645cb1b2f90 100644 --- a/drivers/staging/echo/fir.h +++ b/drivers/staging/echo/fir.h @@ -72,8 +72,7 @@ 16 bit integer FIR descriptor. This defines the working state for a single instance of an FIR filter using 16 bit integer coefficients. */ -typedef struct -{ +typedef struct { int taps; int curr_pos; const int16_t *coeffs; @@ -85,8 +84,7 @@ typedef struct instance of an FIR filter using 32 bit integer coefficients, and filtering 16 bit integer data. */ -typedef struct -{ +typedef struct { int taps; int curr_pos; const int32_t *coeffs; @@ -97,273 +95,201 @@ typedef struct Floating point FIR descriptor. This defines the working state for a single instance of an FIR filter using floating point coefficients and data. */ -typedef struct -{ +typedef struct { int taps; int curr_pos; const float *coeffs; float *history; } fir_float_state_t; -#ifdef __cplusplus -extern "C" { -#endif - -static __inline__ const int16_t *fir16_create(fir16_state_t *fir, - const int16_t *coeffs, - int taps) +static __inline__ const int16_t *fir16_create(fir16_state_t * fir, + const int16_t * coeffs, int taps) { fir->taps = taps; fir->curr_pos = taps - 1; fir->coeffs = coeffs; -#if defined(USE_MMX) || defined(USE_SSE2) || defined(__BLACKFIN_ASM__) - if ((fir->history = malloc(2*taps*sizeof(int16_t)))) - memset(fir->history, 0, 2*taps*sizeof(int16_t)); +#if defined(USE_MMX) || defined(USE_SSE2) || defined(__bfin__) + fir->history = kcalloc(2 * taps, sizeof(int16_t), GFP_KERNEL); #else - if ((fir->history = (int16_t *) malloc(taps*sizeof(int16_t)))) - memset(fir->history, 0, taps*sizeof(int16_t)); + fir->history = kcalloc(taps, sizeof(int16_t), GFP_KERNEL); #endif return fir->history; } -/*- End of function --------------------------------------------------------*/ -static __inline__ void fir16_flush(fir16_state_t *fir) +static __inline__ void fir16_flush(fir16_state_t * fir) { -#if defined(USE_MMX) || defined(USE_SSE2) || defined(__BLACKFIN_ASM__) - memset(fir->history, 0, 2*fir->taps*sizeof(int16_t)); +#if defined(USE_MMX) || defined(USE_SSE2) || defined(__bfin__) + memset(fir->history, 0, 2 * fir->taps * sizeof(int16_t)); #else - memset(fir->history, 0, fir->taps*sizeof(int16_t)); + memset(fir->history, 0, fir->taps * sizeof(int16_t)); #endif } -/*- End of function --------------------------------------------------------*/ -static __inline__ void fir16_free(fir16_state_t *fir) +static __inline__ void fir16_free(fir16_state_t * fir) { - free(fir->history); + kfree(fir->history); } -/*- End of function --------------------------------------------------------*/ -#ifdef __BLACKFIN_ASM__ +#ifdef __bfin__ static inline int32_t dot_asm(short *x, short *y, int len) { - int dot; - - len--; - - __asm__ - ( - "I0 = %1;\n\t" - "I1 = %2;\n\t" - "A0 = 0;\n\t" - "R0.L = W[I0++] || R1.L = W[I1++];\n\t" - "LOOP dot%= LC0 = %3;\n\t" - "LOOP_BEGIN dot%=;\n\t" - "A0 += R0.L * R1.L (IS) || R0.L = W[I0++] || R1.L = W[I1++];\n\t" - "LOOP_END dot%=;\n\t" - "A0 += R0.L*R1.L (IS);\n\t" - "R0 = A0;\n\t" - "%0 = R0;\n\t" - : "=&d" (dot) - : "a" (x), "a" (y), "a" (len) - : "I0", "I1", "A1", "A0", "R0", "R1" - ); - - return dot; + int dot; + + len--; + + __asm__("I0 = %1;\n\t" + "I1 = %2;\n\t" + "A0 = 0;\n\t" + "R0.L = W[I0++] || R1.L = W[I1++];\n\t" + "LOOP dot%= LC0 = %3;\n\t" + "LOOP_BEGIN dot%=;\n\t" + "A0 += R0.L * R1.L (IS) || R0.L = W[I0++] || R1.L = W[I1++];\n\t" + "LOOP_END dot%=;\n\t" + "A0 += R0.L*R1.L (IS);\n\t" + "R0 = A0;\n\t" + "%0 = R0;\n\t" + :"=&d"(dot) + :"a"(x), "a"(y), "a"(len) + :"I0", "I1", "A1", "A0", "R0", "R1" + ); + + return dot; } #endif -/*- End of function --------------------------------------------------------*/ -static __inline__ int16_t fir16(fir16_state_t *fir, int16_t sample) +static __inline__ int16_t fir16(fir16_state_t * fir, int16_t sample) { - int32_t y; + int32_t y; #if defined(USE_MMX) - int i; - mmx_t *mmx_coeffs; - mmx_t *mmx_hist; - - fir->history[fir->curr_pos] = sample; - fir->history[fir->curr_pos + fir->taps] = sample; - - mmx_coeffs = (mmx_t *) fir->coeffs; - mmx_hist = (mmx_t *) &fir->history[fir->curr_pos]; - i = fir->taps; - pxor_r2r(mm4, mm4); - /* 8 samples per iteration, so the filter must be a multiple of 8 long. */ - while (i > 0) - { - movq_m2r(mmx_coeffs[0], mm0); - movq_m2r(mmx_coeffs[1], mm2); - movq_m2r(mmx_hist[0], mm1); - movq_m2r(mmx_hist[1], mm3); - mmx_coeffs += 2; - mmx_hist += 2; - pmaddwd_r2r(mm1, mm0); - pmaddwd_r2r(mm3, mm2); - paddd_r2r(mm0, mm4); - paddd_r2r(mm2, mm4); - i -= 8; - } - movq_r2r(mm4, mm0); - psrlq_i2r(32, mm0); - paddd_r2r(mm0, mm4); - movd_r2m(mm4, y); - emms(); + int i; + mmx_t *mmx_coeffs; + mmx_t *mmx_hist; + + fir->history[fir->curr_pos] = sample; + fir->history[fir->curr_pos + fir->taps] = sample; + + mmx_coeffs = (mmx_t *) fir->coeffs; + mmx_hist = (mmx_t *) & fir->history[fir->curr_pos]; + i = fir->taps; + pxor_r2r(mm4, mm4); + /* 8 samples per iteration, so the filter must be a multiple of 8 long. */ + while (i > 0) { + movq_m2r(mmx_coeffs[0], mm0); + movq_m2r(mmx_coeffs[1], mm2); + movq_m2r(mmx_hist[0], mm1); + movq_m2r(mmx_hist[1], mm3); + mmx_coeffs += 2; + mmx_hist += 2; + pmaddwd_r2r(mm1, mm0); + pmaddwd_r2r(mm3, mm2); + paddd_r2r(mm0, mm4); + paddd_r2r(mm2, mm4); + i -= 8; + } + movq_r2r(mm4, mm0); + psrlq_i2r(32, mm0); + paddd_r2r(mm0, mm4); + movd_r2m(mm4, y); + emms(); #elif defined(USE_SSE2) - int i; - xmm_t *xmm_coeffs; - xmm_t *xmm_hist; - - fir->history[fir->curr_pos] = sample; - fir->history[fir->curr_pos + fir->taps] = sample; - - xmm_coeffs = (xmm_t *) fir->coeffs; - xmm_hist = (xmm_t *) &fir->history[fir->curr_pos]; - i = fir->taps; - pxor_r2r(xmm4, xmm4); - /* 16 samples per iteration, so the filter must be a multiple of 16 long. */ - while (i > 0) - { - movdqu_m2r(xmm_coeffs[0], xmm0); - movdqu_m2r(xmm_coeffs[1], xmm2); - movdqu_m2r(xmm_hist[0], xmm1); - movdqu_m2r(xmm_hist[1], xmm3); - xmm_coeffs += 2; - xmm_hist += 2; - pmaddwd_r2r(xmm1, xmm0); - pmaddwd_r2r(xmm3, xmm2); - paddd_r2r(xmm0, xmm4); - paddd_r2r(xmm2, xmm4); - i -= 16; - } - movdqa_r2r(xmm4, xmm0); - psrldq_i2r(8, xmm0); - paddd_r2r(xmm0, xmm4); - movdqa_r2r(xmm4, xmm0); - psrldq_i2r(4, xmm0); - paddd_r2r(xmm0, xmm4); - movd_r2m(xmm4, y); -#elif defined(__BLACKFIN_ASM__) - fir->history[fir->curr_pos] = sample; - fir->history[fir->curr_pos + fir->taps] = sample; - y = dot_asm((int16_t*)fir->coeffs, &fir->history[fir->curr_pos], fir->taps); + int i; + xmm_t *xmm_coeffs; + xmm_t *xmm_hist; + + fir->history[fir->curr_pos] = sample; + fir->history[fir->curr_pos + fir->taps] = sample; + + xmm_coeffs = (xmm_t *) fir->coeffs; + xmm_hist = (xmm_t *) & fir->history[fir->curr_pos]; + i = fir->taps; + pxor_r2r(xmm4, xmm4); + /* 16 samples per iteration, so the filter must be a multiple of 16 long. */ + while (i > 0) { + movdqu_m2r(xmm_coeffs[0], xmm0); + movdqu_m2r(xmm_coeffs[1], xmm2); + movdqu_m2r(xmm_hist[0], xmm1); + movdqu_m2r(xmm_hist[1], xmm3); + xmm_coeffs += 2; + xmm_hist += 2; + pmaddwd_r2r(xmm1, xmm0); + pmaddwd_r2r(xmm3, xmm2); + paddd_r2r(xmm0, xmm4); + paddd_r2r(xmm2, xmm4); + i -= 16; + } + movdqa_r2r(xmm4, xmm0); + psrldq_i2r(8, xmm0); + paddd_r2r(xmm0, xmm4); + movdqa_r2r(xmm4, xmm0); + psrldq_i2r(4, xmm0); + paddd_r2r(xmm0, xmm4); + movd_r2m(xmm4, y); +#elif defined(__bfin__) + fir->history[fir->curr_pos] = sample; + fir->history[fir->curr_pos + fir->taps] = sample; + y = dot_asm((int16_t *) fir->coeffs, &fir->history[fir->curr_pos], + fir->taps); #else - int i; - int offset1; - int offset2; - - fir->history[fir->curr_pos] = sample; - - offset2 = fir->curr_pos; - offset1 = fir->taps - offset2; - y = 0; - for (i = fir->taps - 1; i >= offset1; i--) - y += fir->coeffs[i]*fir->history[i - offset1]; - for ( ; i >= 0; i--) - y += fir->coeffs[i]*fir->history[i + offset2]; + int i; + int offset1; + int offset2; + + fir->history[fir->curr_pos] = sample; + + offset2 = fir->curr_pos; + offset1 = fir->taps - offset2; + y = 0; + for (i = fir->taps - 1; i >= offset1; i--) + y += fir->coeffs[i] * fir->history[i - offset1]; + for (; i >= 0; i--) + y += fir->coeffs[i] * fir->history[i + offset2]; #endif - if (fir->curr_pos <= 0) - fir->curr_pos = fir->taps; - fir->curr_pos--; - return (int16_t) (y >> 15); -} -/*- End of function --------------------------------------------------------*/ - -static __inline__ const int16_t *fir32_create(fir32_state_t *fir, - const int32_t *coeffs, - int taps) -{ - fir->taps = taps; - fir->curr_pos = taps - 1; - fir->coeffs = coeffs; - fir->history = (int16_t *) malloc(taps*sizeof(int16_t)); - if (fir->history) - memset(fir->history, '\0', taps*sizeof(int16_t)); - return fir->history; -} -/*- End of function --------------------------------------------------------*/ - -static __inline__ void fir32_flush(fir32_state_t *fir) -{ - memset(fir->history, 0, fir->taps*sizeof(int16_t)); + if (fir->curr_pos <= 0) + fir->curr_pos = fir->taps; + fir->curr_pos--; + return (int16_t) (y >> 15); } -/*- End of function --------------------------------------------------------*/ -static __inline__ void fir32_free(fir32_state_t *fir) +static __inline__ const int16_t *fir32_create(fir32_state_t * fir, + const int32_t * coeffs, int taps) { - free(fir->history); -} -/*- End of function --------------------------------------------------------*/ - -static __inline__ int16_t fir32(fir32_state_t *fir, int16_t sample) -{ - int i; - int32_t y; - int offset1; - int offset2; - - fir->history[fir->curr_pos] = sample; - offset2 = fir->curr_pos; - offset1 = fir->taps - offset2; - y = 0; - for (i = fir->taps - 1; i >= offset1; i--) - y += fir->coeffs[i]*fir->history[i - offset1]; - for ( ; i >= 0; i--) - y += fir->coeffs[i]*fir->history[i + offset2]; - if (fir->curr_pos <= 0) - fir->curr_pos = fir->taps; - fir->curr_pos--; - return (int16_t) (y >> 15); + fir->taps = taps; + fir->curr_pos = taps - 1; + fir->coeffs = coeffs; + fir->history = kcalloc(taps, sizeof(int16_t), GFP_KERNEL); + return fir->history; } -/*- End of function --------------------------------------------------------*/ -#ifndef __KERNEL__ -static __inline__ const float *fir_float_create(fir_float_state_t *fir, - const float *coeffs, - int taps) +static __inline__ void fir32_flush(fir32_state_t * fir) { - fir->taps = taps; - fir->curr_pos = taps - 1; - fir->coeffs = coeffs; - fir->history = (float *) malloc(taps*sizeof(float)); - if (fir->history) - memset(fir->history, '\0', taps*sizeof(float)); - return fir->history; + memset(fir->history, 0, fir->taps * sizeof(int16_t)); } -/*- End of function --------------------------------------------------------*/ -static __inline__ void fir_float_free(fir_float_state_t *fir) +static __inline__ void fir32_free(fir32_state_t * fir) { - free(fir->history); + kfree(fir->history); } -/*- End of function --------------------------------------------------------*/ -static __inline__ int16_t fir_float(fir_float_state_t *fir, int16_t sample) +static __inline__ int16_t fir32(fir32_state_t * fir, int16_t sample) { - int i; - float y; - int offset1; - int offset2; - - fir->history[fir->curr_pos] = sample; - - offset2 = fir->curr_pos; - offset1 = fir->taps - offset2; - y = 0; - for (i = fir->taps - 1; i >= offset1; i--) - y += fir->coeffs[i]*fir->history[i - offset1]; - for ( ; i >= 0; i--) - y += fir->coeffs[i]*fir->history[i + offset2]; - if (fir->curr_pos <= 0) - fir->curr_pos = fir->taps; - fir->curr_pos--; - return (int16_t) y; + int i; + int32_t y; + int offset1; + int offset2; + + fir->history[fir->curr_pos] = sample; + offset2 = fir->curr_pos; + offset1 = fir->taps - offset2; + y = 0; + for (i = fir->taps - 1; i >= offset1; i--) + y += fir->coeffs[i] * fir->history[i - offset1]; + for (; i >= 0; i--) + y += fir->coeffs[i] * fir->history[i + offset2]; + if (fir->curr_pos <= 0) + fir->curr_pos = fir->taps; + fir->curr_pos--; + return (int16_t) (y >> 15); } -/*- End of function --------------------------------------------------------*/ -#endif - -#ifdef __cplusplus -} -#endif #endif /*- End of file ------------------------------------------------------------*/ diff --git a/drivers/staging/echo/mmx.h b/drivers/staging/echo/mmx.h index b5a3964865b6..35412efe61ce 100644 --- a/drivers/staging/echo/mmx.h +++ b/drivers/staging/echo/mmx.h @@ -27,24 +27,23 @@ * values by ULL, lest they be truncated by the compiler) */ -typedef union { - long long q; /* Quadword (64-bit) value */ - unsigned long long uq; /* Unsigned Quadword */ - int d[2]; /* 2 Doubleword (32-bit) values */ - unsigned int ud[2]; /* 2 Unsigned Doubleword */ - short w[4]; /* 4 Word (16-bit) values */ - unsigned short uw[4]; /* 4 Unsigned Word */ - char b[8]; /* 8 Byte (8-bit) values */ - unsigned char ub[8]; /* 8 Unsigned Byte */ - float s[2]; /* Single-precision (32-bit) value */ -} mmx_t; /* On an 8-byte (64-bit) boundary */ +typedef union { + long long q; /* Quadword (64-bit) value */ + unsigned long long uq; /* Unsigned Quadword */ + int d[2]; /* 2 Doubleword (32-bit) values */ + unsigned int ud[2]; /* 2 Unsigned Doubleword */ + short w[4]; /* 4 Word (16-bit) values */ + unsigned short uw[4]; /* 4 Unsigned Word */ + char b[8]; /* 8 Byte (8-bit) values */ + unsigned char ub[8]; /* 8 Unsigned Byte */ + float s[2]; /* Single-precision (32-bit) value */ +} mmx_t; /* On an 8-byte (64-bit) boundary */ /* SSE registers */ typedef union { char b[16]; } xmm_t; - #define mmx_i2r(op,imm,reg) \ __asm__ __volatile__ (#op " %0, %%" #reg \ : /* nothing */ \ @@ -63,7 +62,6 @@ typedef union { #define mmx_r2r(op,regs,regd) \ __asm__ __volatile__ (#op " %" #regs ", %" #regd) - #define emms() __asm__ __volatile__ ("emms") #define movd_m2r(var,reg) mmx_m2r (movd, var, reg) @@ -192,16 +190,13 @@ typedef union { #define pxor_m2r(var,reg) mmx_m2r (pxor, var, reg) #define pxor_r2r(regs,regd) mmx_r2r (pxor, regs, regd) - /* 3DNOW extensions */ #define pavgusb_m2r(var,reg) mmx_m2r (pavgusb, var, reg) #define pavgusb_r2r(regs,regd) mmx_r2r (pavgusb, regs, regd) - /* AMD MMX extensions - also available in intel SSE */ - #define mmx_m2ri(op,mem,reg,imm) \ __asm__ __volatile__ (#op " %1, %0, %%" #reg \ : /* nothing */ \ @@ -216,7 +211,6 @@ typedef union { : /* nothing */ \ : "m" (mem)) - #define maskmovq(regs,maskreg) mmx_r2ri (maskmovq, regs, maskreg) #define movntq_r2m(mmreg,var) mmx_r2m (movntq, mmreg, var) @@ -284,5 +278,4 @@ typedef union { #define punpcklqdq_r2r(regs,regd) mmx_r2r (punpcklqdq, regs, regd) #define punpckhqdq_r2r(regs,regd) mmx_r2r (punpckhqdq, regs, regd) - #endif /* AVCODEC_I386MMX_H */ diff --git a/drivers/staging/echo/oslec.h b/drivers/staging/echo/oslec.h new file mode 100644 index 000000000000..bad852328a2f --- /dev/null +++ b/drivers/staging/echo/oslec.h @@ -0,0 +1,86 @@ +/* + * OSLEC - A line echo canceller. This code is being developed + * against and partially complies with G168. Using code from SpanDSP + * + * Written by Steve Underwood <steveu@coppice.org> + * and David Rowe <david_at_rowetel_dot_com> + * + * Copyright (C) 2001 Steve Underwood and 2007-2008 David Rowe + * + * All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2, as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ + +#ifndef __OSLEC_H +#define __OSLEC_H + +/* TODO: document interface */ + +/* Mask bits for the adaption mode */ +#define ECHO_CAN_USE_ADAPTION 0x01 +#define ECHO_CAN_USE_NLP 0x02 +#define ECHO_CAN_USE_CNG 0x04 +#define ECHO_CAN_USE_CLIP 0x08 +#define ECHO_CAN_USE_TX_HPF 0x10 +#define ECHO_CAN_USE_RX_HPF 0x20 +#define ECHO_CAN_DISABLE 0x40 + +/*! + G.168 echo canceller descriptor. This defines the working state for a line + echo canceller. +*/ +struct oslec_state; + +/*! Create a voice echo canceller context. + \param len The length of the canceller, in samples. + \return The new canceller context, or NULL if the canceller could not be created. +*/ +struct oslec_state *oslec_create(int len, int adaption_mode); + +/*! Free a voice echo canceller context. + \param ec The echo canceller context. +*/ +void oslec_free(struct oslec_state *ec); + +/*! Flush (reinitialise) a voice echo canceller context. + \param ec The echo canceller context. +*/ +void oslec_flush(struct oslec_state *ec); + +/*! Set the adaption mode of a voice echo canceller context. + \param ec The echo canceller context. + \param adapt The mode. +*/ +void oslec_adaption_mode(struct oslec_state *ec, int adaption_mode); + +void oslec_snapshot(struct oslec_state *ec); + +/*! Process a sample through a voice echo canceller. + \param ec The echo canceller context. + \param tx The transmitted audio sample. + \param rx The received audio sample. + \return The clean (echo cancelled) received sample. +*/ +int16_t oslec_update(struct oslec_state *ec, int16_t tx, int16_t rx); + +/*! Process to high pass filter the tx signal. + \param ec The echo canceller context. + \param tx The transmitted auio sample. + \return The HP filtered transmit sample, send this to your D/A. +*/ +int16_t oslec_hpf_tx(struct oslec_state *ec, int16_t tx); + +#endif /* __OSLEC_H */ diff --git a/drivers/staging/et131x/et1310_phy.c b/drivers/staging/et131x/et1310_phy.c index 6c4fa54419ea..9dd6dfd9a033 100644 --- a/drivers/staging/et131x/et1310_phy.c +++ b/drivers/staging/et131x/et1310_phy.c @@ -84,7 +84,6 @@ #include <linux/if_arp.h> #include <linux/ioport.h> #include <linux/random.h> -#include <linux/delay.h> #include "et1310_phy.h" #include "et1310_pm.h" @@ -95,7 +94,6 @@ #include "et131x_initpci.h" #include "et1310_address_map.h" -#include "et1310_jagcore.h" #include "et1310_tx.h" #include "et1310_rx.h" #include "et1310_mac.h" diff --git a/drivers/staging/et131x/et131x_debug.c b/drivers/staging/et131x/et131x_debug.c index 9ee5bce92c27..d1dd46e0a9c8 100644 --- a/drivers/staging/et131x/et131x_debug.c +++ b/drivers/staging/et131x/et131x_debug.c @@ -97,7 +97,6 @@ #include "et131x_isr.h" #include "et1310_address_map.h" -#include "et1310_jagcore.h" #include "et1310_tx.h" #include "et1310_rx.h" #include "et1310_mac.h" diff --git a/drivers/staging/et131x/et131x_initpci.c b/drivers/staging/et131x/et131x_initpci.c index 4c6f171f5b7c..a18c499d0ae0 100644 --- a/drivers/staging/et131x/et131x_initpci.c +++ b/drivers/staging/et131x/et131x_initpci.c @@ -97,7 +97,6 @@ #include "et131x_isr.h" #include "et1310_address_map.h" -#include "et1310_jagcore.h" #include "et1310_tx.h" #include "et1310_rx.h" #include "et1310_mac.h" diff --git a/drivers/staging/go7007/go7007-driver.c b/drivers/staging/go7007/go7007-driver.c index 81ae4b0fa890..e4ead96679c8 100644 --- a/drivers/staging/go7007/go7007-driver.c +++ b/drivers/staging/go7007/go7007-driver.c @@ -16,7 +16,6 @@ */ #include <linux/module.h> -#include <linux/version.h> #include <linux/init.h> #include <linux/delay.h> #include <linux/sched.h> diff --git a/drivers/staging/go7007/go7007-fw.c b/drivers/staging/go7007/go7007-fw.c index c2aea1020b0d..a0e17b0e0ce3 100644 --- a/drivers/staging/go7007/go7007-fw.c +++ b/drivers/staging/go7007/go7007-fw.c @@ -26,7 +26,6 @@ #include <linux/module.h> #include <linux/init.h> -#include <linux/version.h> #include <linux/time.h> #include <linux/mm.h> #include <linux/device.h> diff --git a/drivers/staging/go7007/go7007-i2c.c b/drivers/staging/go7007/go7007-i2c.c index 10baae3dade6..cd55b76eabc7 100644 --- a/drivers/staging/go7007/go7007-i2c.c +++ b/drivers/staging/go7007/go7007-i2c.c @@ -15,7 +15,6 @@ * Inc., 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. */ -#include <linux/version.h> #include <linux/module.h> #include <linux/init.h> #include <linux/delay.h> diff --git a/drivers/staging/go7007/go7007-usb.c b/drivers/staging/go7007/go7007-usb.c index d4ed6d2b715f..3f5ee3424e72 100644 --- a/drivers/staging/go7007/go7007-usb.c +++ b/drivers/staging/go7007/go7007-usb.c @@ -16,7 +16,6 @@ */ #include <linux/module.h> -#include <linux/version.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/wait.h> diff --git a/drivers/staging/go7007/snd-go7007.c b/drivers/staging/go7007/snd-go7007.c index 382740c405ff..a7de401f61ab 100644 --- a/drivers/staging/go7007/snd-go7007.c +++ b/drivers/staging/go7007/snd-go7007.c @@ -17,7 +17,6 @@ #include <linux/kernel.h> #include <linux/module.h> -#include <linux/version.h> #include <linux/moduleparam.h> #include <linux/init.h> #include <linux/spinlock.h> diff --git a/drivers/staging/go7007/wis-ov7640.c b/drivers/staging/go7007/wis-ov7640.c index f5f11e927af3..2f9efca04606 100644 --- a/drivers/staging/go7007/wis-ov7640.c +++ b/drivers/staging/go7007/wis-ov7640.c @@ -17,7 +17,6 @@ #include <linux/module.h> #include <linux/init.h> -#include <linux/version.h> #include <linux/i2c.h> #include <linux/videodev2.h> diff --git a/drivers/staging/go7007/wis-saa7113.c b/drivers/staging/go7007/wis-saa7113.c index c1aff1b923a0..11689723945e 100644 --- a/drivers/staging/go7007/wis-saa7113.c +++ b/drivers/staging/go7007/wis-saa7113.c @@ -17,7 +17,6 @@ #include <linux/module.h> #include <linux/init.h> -#include <linux/version.h> #include <linux/i2c.h> #include <linux/videodev2.h> #include <linux/ioctl.h> diff --git a/drivers/staging/go7007/wis-saa7115.c b/drivers/staging/go7007/wis-saa7115.c index 5c94c883b312..59417a7174d7 100644 --- a/drivers/staging/go7007/wis-saa7115.c +++ b/drivers/staging/go7007/wis-saa7115.c @@ -17,7 +17,6 @@ #include <linux/module.h> #include <linux/init.h> -#include <linux/version.h> #include <linux/i2c.h> #include <linux/videodev2.h> #include <linux/ioctl.h> diff --git a/drivers/staging/go7007/wis-sony-tuner.c b/drivers/staging/go7007/wis-sony-tuner.c index 5997fb479459..5a91ee409a7c 100644 --- a/drivers/staging/go7007/wis-sony-tuner.c +++ b/drivers/staging/go7007/wis-sony-tuner.c @@ -17,7 +17,6 @@ #include <linux/module.h> #include <linux/init.h> -#include <linux/version.h> #include <linux/i2c.h> #include <linux/videodev2.h> #include <media/tuner.h> diff --git a/drivers/staging/go7007/wis-tw2804.c b/drivers/staging/go7007/wis-tw2804.c index 27fe4d0d4ed6..57b8f2b1caa3 100644 --- a/drivers/staging/go7007/wis-tw2804.c +++ b/drivers/staging/go7007/wis-tw2804.c @@ -17,7 +17,6 @@ #include <linux/module.h> #include <linux/init.h> -#include <linux/version.h> #include <linux/i2c.h> #include <linux/videodev2.h> #include <linux/ioctl.h> diff --git a/drivers/staging/go7007/wis-tw9903.c b/drivers/staging/go7007/wis-tw9903.c index d8e41968022e..40627b282cb4 100644 --- a/drivers/staging/go7007/wis-tw9903.c +++ b/drivers/staging/go7007/wis-tw9903.c @@ -17,7 +17,6 @@ #include <linux/module.h> #include <linux/init.h> -#include <linux/version.h> #include <linux/i2c.h> #include <linux/videodev2.h> #include <linux/ioctl.h> diff --git a/drivers/staging/go7007/wis-uda1342.c b/drivers/staging/go7007/wis-uda1342.c index a0894e3cb8c7..555645c0cc1a 100644 --- a/drivers/staging/go7007/wis-uda1342.c +++ b/drivers/staging/go7007/wis-uda1342.c @@ -17,7 +17,6 @@ #include <linux/module.h> #include <linux/init.h> -#include <linux/version.h> #include <linux/i2c.h> #include <linux/videodev2.h> #include <media/tvaudio.h> diff --git a/drivers/staging/me4000/me4000.c b/drivers/staging/me4000/me4000.c index 862dd7ffb5c0..0b33773bb4f6 100644 --- a/drivers/staging/me4000/me4000.c +++ b/drivers/staging/me4000/me4000.c @@ -25,24 +25,21 @@ #include <linux/sched.h> #include <linux/interrupt.h> #include <linux/pci.h> -#include <asm/io.h> -#include <asm/system.h> -#include <asm/uaccess.h> #include <linux/errno.h> #include <linux/delay.h> -#include <linux/fs.h> #include <linux/mm.h> #include <linux/unistd.h> #include <linux/list.h> #include <linux/proc_fs.h> - +#include <linux/types.h> #include <linux/poll.h> #include <linux/vmalloc.h> +#include <linux/slab.h> #include <asm/pgtable.h> #include <asm/uaccess.h> -#include <linux/types.h> - -#include <linux/slab.h> +#include <asm/io.h> +#include <asm/system.h> +#include <asm/uaccess.h> /* Include-File for the Meilhaus ME-4000 I/O board */ #include "me4000.h" @@ -57,14 +54,14 @@ MODULE_SUPPORTED_DEVICE("Meilhaus ME-4000 Multi I/O boards"); MODULE_LICENSE("GPL"); /* Board specific data are kept in a global list */ -LIST_HEAD(me4000_board_info_list); +static LIST_HEAD(me4000_board_info_list); /* Major Device Numbers. 0 means to get it automatically from the System */ -static int me4000_ao_major_driver_no = 0; -static int me4000_ai_major_driver_no = 0; -static int me4000_dio_major_driver_no = 0; -static int me4000_cnt_major_driver_no = 0; -static int me4000_ext_int_major_driver_no = 0; +static int me4000_ao_major_driver_no; +static int me4000_ai_major_driver_no; +static int me4000_dio_major_driver_no; +static int me4000_cnt_major_driver_no; +static int me4000_ext_int_major_driver_no; /* Let the user specify a custom major driver number */ module_param(me4000_ao_major_driver_no, int, 0); @@ -88,36 +85,22 @@ MODULE_PARM_DESC(me4000_ext_int_major_driver_no, "Major driver number for external interrupt (default 0)"); /*----------------------------------------------------------------------------- - Module stuff - ---------------------------------------------------------------------------*/ -int init_module(void); -void cleanup_module(void); - -/*----------------------------------------------------------------------------- Board detection and initialization ---------------------------------------------------------------------------*/ static int me4000_probe(struct pci_dev *dev, const struct pci_device_id *id); -static int me4000_xilinx_download(me4000_info_t *); -static int me4000_reset_board(me4000_info_t *); +static int me4000_xilinx_download(struct me4000_info *); +static int me4000_reset_board(struct me4000_info *); static void clear_board_info_list(void); -static int get_registers(struct pci_dev *dev, me4000_info_t * info); -static int init_board_info(struct pci_dev *dev, me4000_info_t * board_info); -static int alloc_ao_contexts(me4000_info_t * info); -static void release_ao_contexts(me4000_info_t * board_info); -static int alloc_ai_context(me4000_info_t * info); -static int alloc_dio_context(me4000_info_t * info); -static int alloc_cnt_context(me4000_info_t * info); -static int alloc_ext_int_context(me4000_info_t * info); - +static void release_ao_contexts(struct me4000_info *board_info); /*----------------------------------------------------------------------------- Stuff used by all device parts ---------------------------------------------------------------------------*/ static int me4000_open(struct inode *, struct file *); static int me4000_release(struct inode *, struct file *); -static int me4000_get_user_info(me4000_user_info_t *, - me4000_info_t * board_info); +static int me4000_get_user_info(struct me4000_user_info *, + struct me4000_info *board_info); static int me4000_read_procmem(char *, char **, off_t, int, int *, void *); /*----------------------------------------------------------------------------- @@ -140,40 +123,42 @@ static int me4000_ao_ioctl_cont(struct inode *, struct file *, unsigned int, static unsigned int me4000_ao_poll_cont(struct file *, poll_table *); static int me4000_ao_fsync_cont(struct file *, struct dentry *, int); -static int me4000_ao_start(unsigned long *, me4000_ao_context_t *); -static int me4000_ao_stop(me4000_ao_context_t *); -static int me4000_ao_immediate_stop(me4000_ao_context_t *); -static int me4000_ao_timer_set_divisor(u32 *, me4000_ao_context_t *); -static int me4000_ao_preload(me4000_ao_context_t *); -static int me4000_ao_preload_update(me4000_ao_context_t *); -static int me4000_ao_ex_trig_set_edge(int *, me4000_ao_context_t *); -static int me4000_ao_ex_trig_enable(me4000_ao_context_t *); -static int me4000_ao_ex_trig_disable(me4000_ao_context_t *); -static int me4000_ao_prepare(me4000_ao_context_t * ao_info); -static int me4000_ao_reset(me4000_ao_context_t * ao_info); -static int me4000_ao_enable_do(me4000_ao_context_t *); -static int me4000_ao_disable_do(me4000_ao_context_t *); -static int me4000_ao_fsm_state(int *, me4000_ao_context_t *); - -static int me4000_ao_simultaneous_ex_trig(me4000_ao_context_t * ao_context); -static int me4000_ao_simultaneous_sw(me4000_ao_context_t * ao_context); -static int me4000_ao_simultaneous_disable(me4000_ao_context_t * ao_context); -static int me4000_ao_simultaneous_update(me4000_ao_channel_list_t * channels, - me4000_ao_context_t * ao_context); - -static int me4000_ao_synchronous_ex_trig(me4000_ao_context_t * ao_context); -static int me4000_ao_synchronous_sw(me4000_ao_context_t * ao_context); -static int me4000_ao_synchronous_disable(me4000_ao_context_t * ao_context); +static int me4000_ao_start(unsigned long *, struct me4000_ao_context *); +static int me4000_ao_stop(struct me4000_ao_context *); +static int me4000_ao_immediate_stop(struct me4000_ao_context *); +static int me4000_ao_timer_set_divisor(u32 *, struct me4000_ao_context *); +static int me4000_ao_preload(struct me4000_ao_context *); +static int me4000_ao_preload_update(struct me4000_ao_context *); +static int me4000_ao_ex_trig_set_edge(int *, struct me4000_ao_context *); +static int me4000_ao_ex_trig_enable(struct me4000_ao_context *); +static int me4000_ao_ex_trig_disable(struct me4000_ao_context *); +static int me4000_ao_prepare(struct me4000_ao_context *ao_info); +static int me4000_ao_reset(struct me4000_ao_context *ao_info); +static int me4000_ao_enable_do(struct me4000_ao_context *); +static int me4000_ao_disable_do(struct me4000_ao_context *); +static int me4000_ao_fsm_state(int *, struct me4000_ao_context *); + +static int me4000_ao_simultaneous_ex_trig(struct me4000_ao_context *ao_context); +static int me4000_ao_simultaneous_sw(struct me4000_ao_context *ao_context); +static int me4000_ao_simultaneous_disable(struct me4000_ao_context *ao_context); +static int me4000_ao_simultaneous_update( + struct me4000_ao_channel_list *channels, + struct me4000_ao_context *ao_context); + +static int me4000_ao_synchronous_ex_trig(struct me4000_ao_context *ao_context); +static int me4000_ao_synchronous_sw(struct me4000_ao_context *ao_context); +static int me4000_ao_synchronous_disable(struct me4000_ao_context *ao_context); static int me4000_ao_ex_trig_timeout(unsigned long *arg, - me4000_ao_context_t * ao_context); + struct me4000_ao_context *ao_context); static int me4000_ao_get_free_buffer(unsigned long *arg, - me4000_ao_context_t * ao_context); + struct me4000_ao_context *ao_context); /*----------------------------------------------------------------------------- Analog input stuff ---------------------------------------------------------------------------*/ -static int me4000_ai_single(me4000_ai_single_t *, me4000_ai_context_t *); +static int me4000_ai_single(struct me4000_ai_single *, + struct me4000_ai_context *); static int me4000_ai_ioctl_sing(struct inode *, struct file *, unsigned int, unsigned long); @@ -186,68 +171,69 @@ static int me4000_ai_fasync(int fd, struct file *file_p, int mode); static int me4000_ai_ioctl_ext(struct inode *, struct file *, unsigned int, unsigned long); -static int me4000_ai_prepare(me4000_ai_context_t * ai_context); -static int me4000_ai_reset(me4000_ai_context_t * ai_context); -static int me4000_ai_config(me4000_ai_config_t *, me4000_ai_context_t *); -static int me4000_ai_start(me4000_ai_context_t *); -static int me4000_ai_start_ex(unsigned long *, me4000_ai_context_t *); -static int me4000_ai_stop(me4000_ai_context_t *); -static int me4000_ai_immediate_stop(me4000_ai_context_t *); -static int me4000_ai_ex_trig_enable(me4000_ai_context_t *); -static int me4000_ai_ex_trig_disable(me4000_ai_context_t *); -static int me4000_ai_ex_trig_setup(me4000_ai_trigger_t *, - me4000_ai_context_t *); -static int me4000_ai_sc_setup(me4000_ai_sc_t * arg, - me4000_ai_context_t * ai_context); -static int me4000_ai_offset_enable(me4000_ai_context_t * ai_context); -static int me4000_ai_offset_disable(me4000_ai_context_t * ai_context); -static int me4000_ai_fullscale_enable(me4000_ai_context_t * ai_context); -static int me4000_ai_fullscale_disable(me4000_ai_context_t * ai_context); -static int me4000_ai_fsm_state(int *arg, me4000_ai_context_t * ai_context); +static int me4000_ai_prepare(struct me4000_ai_context *ai_context); +static int me4000_ai_reset(struct me4000_ai_context *ai_context); +static int me4000_ai_config(struct me4000_ai_config *, + struct me4000_ai_context *); +static int me4000_ai_start(struct me4000_ai_context *); +static int me4000_ai_start_ex(unsigned long *, struct me4000_ai_context *); +static int me4000_ai_stop(struct me4000_ai_context *); +static int me4000_ai_immediate_stop(struct me4000_ai_context *); +static int me4000_ai_ex_trig_enable(struct me4000_ai_context *); +static int me4000_ai_ex_trig_disable(struct me4000_ai_context *); +static int me4000_ai_ex_trig_setup(struct me4000_ai_trigger *, + struct me4000_ai_context *); +static int me4000_ai_sc_setup(struct me4000_ai_sc *arg, + struct me4000_ai_context *ai_context); +static int me4000_ai_offset_enable(struct me4000_ai_context *ai_context); +static int me4000_ai_offset_disable(struct me4000_ai_context *ai_context); +static int me4000_ai_fullscale_enable(struct me4000_ai_context *ai_context); +static int me4000_ai_fullscale_disable(struct me4000_ai_context *ai_context); +static int me4000_ai_fsm_state(int *arg, struct me4000_ai_context *ai_context); static int me4000_ai_get_count_buffer(unsigned long *arg, - me4000_ai_context_t * ai_context); + struct me4000_ai_context *ai_context); /*----------------------------------------------------------------------------- EEPROM stuff ---------------------------------------------------------------------------*/ -static int me4000_eeprom_read(me4000_eeprom_t * arg, - me4000_ai_context_t * ai_context); -static int me4000_eeprom_write(me4000_eeprom_t * arg, - me4000_ai_context_t * ai_context); -static unsigned short eeprom_read_cmd(me4000_ai_context_t * ai_context, - unsigned long cmd, int length); -static int eeprom_write_cmd(me4000_ai_context_t * ai_context, unsigned long cmd, - int length); +static int me4000_eeprom_read(struct me4000_eeprom *arg, + struct me4000_ai_context *ai_context); +static int me4000_eeprom_write(struct me4000_eeprom *arg, + struct me4000_ai_context *ai_context); /*----------------------------------------------------------------------------- Digital I/O stuff ---------------------------------------------------------------------------*/ static int me4000_dio_ioctl(struct inode *, struct file *, unsigned int, unsigned long); -static int me4000_dio_config(me4000_dio_config_t *, me4000_dio_context_t *); -static int me4000_dio_get_byte(me4000_dio_byte_t *, me4000_dio_context_t *); -static int me4000_dio_set_byte(me4000_dio_byte_t *, me4000_dio_context_t *); -static int me4000_dio_reset(me4000_dio_context_t *); +static int me4000_dio_config(struct me4000_dio_config *, + struct me4000_dio_context *); +static int me4000_dio_get_byte(struct me4000_dio_byte *, + struct me4000_dio_context *); +static int me4000_dio_set_byte(struct me4000_dio_byte *, + struct me4000_dio_context *); +static int me4000_dio_reset(struct me4000_dio_context *); /*----------------------------------------------------------------------------- Counter stuff ---------------------------------------------------------------------------*/ static int me4000_cnt_ioctl(struct inode *, struct file *, unsigned int, unsigned long); -static int me4000_cnt_config(me4000_cnt_config_t *, me4000_cnt_context_t *); -static int me4000_cnt_read(me4000_cnt_t *, me4000_cnt_context_t *); -static int me4000_cnt_write(me4000_cnt_t *, me4000_cnt_context_t *); -static int me4000_cnt_reset(me4000_cnt_context_t *); +static int me4000_cnt_config(struct me4000_cnt_config *, + struct me4000_cnt_context *); +static int me4000_cnt_read(struct me4000_cnt *, struct me4000_cnt_context *); +static int me4000_cnt_write(struct me4000_cnt *, struct me4000_cnt_context *); +static int me4000_cnt_reset(struct me4000_cnt_context *); /*----------------------------------------------------------------------------- External interrupt routines ---------------------------------------------------------------------------*/ static int me4000_ext_int_ioctl(struct inode *, struct file *, unsigned int, unsigned long); -static int me4000_ext_int_enable(me4000_ext_int_context_t *); -static int me4000_ext_int_disable(me4000_ext_int_context_t *); +static int me4000_ext_int_enable(struct me4000_ext_int_context *); +static int me4000_ext_int_disable(struct me4000_ext_int_context *); static int me4000_ext_int_count(unsigned long *arg, - me4000_ext_int_context_t * ext_int_context); + struct me4000_ext_int_context *ext_int_context); static int me4000_ext_int_fasync(int fd, struct file *file_ptr, int mode); /*----------------------------------------------------------------------------- @@ -260,27 +246,18 @@ static irqreturn_t me4000_ext_int_isr(int, void *); /*----------------------------------------------------------------------------- Inline functions ---------------------------------------------------------------------------*/ -static int inline me4000_buf_count(me4000_circ_buf_t, int); -static int inline me4000_buf_space(me4000_circ_buf_t, int); -static int inline me4000_space_to_end(me4000_circ_buf_t, int); -static int inline me4000_values_to_end(me4000_circ_buf_t, int); - -static void inline me4000_outb(unsigned char value, unsigned long port); -static void inline me4000_outl(unsigned long value, unsigned long port); -static unsigned long inline me4000_inl(unsigned long port); -static unsigned char inline me4000_inb(unsigned long port); -static int me4000_buf_count(me4000_circ_buf_t buf, int size) +static int inline me4000_buf_count(struct me4000_circ_buf buf, int size) { return ((buf.head - buf.tail) & (size - 1)); } -static int me4000_buf_space(me4000_circ_buf_t buf, int size) +static int inline me4000_buf_space(struct me4000_circ_buf buf, int size) { return ((buf.tail - (buf.head + 1)) & (size - 1)); } -static int me4000_values_to_end(me4000_circ_buf_t buf, int size) +static int inline me4000_values_to_end(struct me4000_circ_buf buf, int size) { int end; int n; @@ -289,7 +266,7 @@ static int me4000_values_to_end(me4000_circ_buf_t buf, int size) return (n < end) ? n : end; } -static int me4000_space_to_end(me4000_circ_buf_t buf, int size) +static int inline me4000_space_to_end(struct me4000_circ_buf buf, int size) { int end; int n; @@ -299,19 +276,19 @@ static int me4000_space_to_end(me4000_circ_buf_t buf, int size) return (n <= end) ? n : (end + 1); } -static void me4000_outb(unsigned char value, unsigned long port) +static void inline me4000_outb(unsigned char value, unsigned long port) { PORT_PDEBUG("--> 0x%02X port 0x%04lX\n", value, port); outb(value, port); } -static void me4000_outl(unsigned long value, unsigned long port) +static void inline me4000_outl(unsigned long value, unsigned long port) { PORT_PDEBUG("--> 0x%08lX port 0x%04lX\n", value, port); outl(value, port); } -static unsigned long me4000_inl(unsigned long port) +static unsigned long inline me4000_inl(unsigned long port) { unsigned long value; value = inl(port); @@ -319,7 +296,7 @@ static unsigned long me4000_inl(unsigned long port) return value; } -static unsigned char me4000_inb(unsigned long port) +static unsigned char inline me4000_inb(unsigned long port) { unsigned char value; value = inb(port); @@ -327,102 +304,102 @@ static unsigned char me4000_inb(unsigned long port) return value; } -struct pci_driver me4000_driver = { +static struct pci_driver me4000_driver = { .name = ME4000_NAME, .id_table = me4000_pci_table, .probe = me4000_probe }; static struct file_operations me4000_ao_fops_sing = { - owner:THIS_MODULE, - write:me4000_ao_write_sing, - ioctl:me4000_ao_ioctl_sing, - open:me4000_open, - release:me4000_release, + .owner = THIS_MODULE, + .write = me4000_ao_write_sing, + .ioctl = me4000_ao_ioctl_sing, + .open = me4000_open, + .release = me4000_release, }; static struct file_operations me4000_ao_fops_wrap = { - owner:THIS_MODULE, - write:me4000_ao_write_wrap, - ioctl:me4000_ao_ioctl_wrap, - open:me4000_open, - release:me4000_release, + .owner = THIS_MODULE, + .write = me4000_ao_write_wrap, + .ioctl = me4000_ao_ioctl_wrap, + .open = me4000_open, + .release = me4000_release, }; static struct file_operations me4000_ao_fops_cont = { - owner:THIS_MODULE, - write:me4000_ao_write_cont, - poll:me4000_ao_poll_cont, - ioctl:me4000_ao_ioctl_cont, - open:me4000_open, - release:me4000_release, - fsync:me4000_ao_fsync_cont, + .owner = THIS_MODULE, + .write = me4000_ao_write_cont, + .poll = me4000_ao_poll_cont, + .ioctl = me4000_ao_ioctl_cont, + .open = me4000_open, + .release = me4000_release, + .fsync = me4000_ao_fsync_cont, }; static struct file_operations me4000_ai_fops_sing = { - owner:THIS_MODULE, - ioctl:me4000_ai_ioctl_sing, - open:me4000_open, - release:me4000_release, + .owner = THIS_MODULE, + .ioctl = me4000_ai_ioctl_sing, + .open = me4000_open, + .release = me4000_release, }; static struct file_operations me4000_ai_fops_cont_sw = { - owner:THIS_MODULE, - read:me4000_ai_read, - poll:me4000_ai_poll, - ioctl:me4000_ai_ioctl_sw, - open:me4000_open, - release:me4000_release, - fasync:me4000_ai_fasync, + .owner = THIS_MODULE, + .read = me4000_ai_read, + .poll = me4000_ai_poll, + .ioctl = me4000_ai_ioctl_sw, + .open = me4000_open, + .release = me4000_release, + .fasync = me4000_ai_fasync, }; static struct file_operations me4000_ai_fops_cont_et = { - owner:THIS_MODULE, - read:me4000_ai_read, - poll:me4000_ai_poll, - ioctl:me4000_ai_ioctl_ext, - open:me4000_open, - release:me4000_release, + .owner = THIS_MODULE, + .read = me4000_ai_read, + .poll = me4000_ai_poll, + .ioctl = me4000_ai_ioctl_ext, + .open = me4000_open, + .release = me4000_release, }; static struct file_operations me4000_ai_fops_cont_et_value = { - owner:THIS_MODULE, - read:me4000_ai_read, - poll:me4000_ai_poll, - ioctl:me4000_ai_ioctl_ext, - open:me4000_open, - release:me4000_release, + .owner = THIS_MODULE, + .read = me4000_ai_read, + .poll = me4000_ai_poll, + .ioctl = me4000_ai_ioctl_ext, + .open = me4000_open, + .release = me4000_release, }; static struct file_operations me4000_ai_fops_cont_et_chanlist = { - owner:THIS_MODULE, - read:me4000_ai_read, - poll:me4000_ai_poll, - ioctl:me4000_ai_ioctl_ext, - open:me4000_open, - release:me4000_release, + .owner = THIS_MODULE, + .read = me4000_ai_read, + .poll = me4000_ai_poll, + .ioctl = me4000_ai_ioctl_ext, + .open = me4000_open, + .release = me4000_release, }; static struct file_operations me4000_dio_fops = { - owner:THIS_MODULE, - ioctl:me4000_dio_ioctl, - open:me4000_open, - release:me4000_release, + .owner = THIS_MODULE, + .ioctl = me4000_dio_ioctl, + .open = me4000_open, + .release = me4000_release, }; static struct file_operations me4000_cnt_fops = { - owner:THIS_MODULE, - ioctl:me4000_cnt_ioctl, - open:me4000_open, - release:me4000_release, + .owner = THIS_MODULE, + .ioctl = me4000_cnt_ioctl, + .open = me4000_open, + .release = me4000_release, }; static struct file_operations me4000_ext_int_fops = { - owner:THIS_MODULE, - ioctl:me4000_ext_int_ioctl, - open:me4000_open, - release:me4000_release, - fasync:me4000_ext_int_fasync, + .owner = THIS_MODULE, + .ioctl = me4000_ext_int_ioctl, + .open = me4000_open, + .release = me4000_release, + .fasync = me4000_ext_int_fasync, }; static struct file_operations *me4000_ao_fops_array[] = { @@ -439,9 +416,9 @@ static struct file_operations *me4000_ai_fops_array[] = { &me4000_ai_fops_cont_et_chanlist, // work through one channel list by external trigger }; -int __init me4000_init_module(void) +static int __init me4000_init_module(void) { - int result = 0; + int result; CALL_PDEBUG("init_module() is executed\n"); @@ -533,26 +510,26 @@ int __init me4000_init_module(void) return 0; - INIT_ERROR_7: +INIT_ERROR_7: unregister_chrdev(me4000_ext_int_major_driver_no, ME4000_EXT_INT_NAME); - INIT_ERROR_6: +INIT_ERROR_6: unregister_chrdev(me4000_cnt_major_driver_no, ME4000_CNT_NAME); - INIT_ERROR_5: +INIT_ERROR_5: unregister_chrdev(me4000_dio_major_driver_no, ME4000_DIO_NAME); - INIT_ERROR_4: +INIT_ERROR_4: unregister_chrdev(me4000_ai_major_driver_no, ME4000_AI_NAME); - INIT_ERROR_3: +INIT_ERROR_3: unregister_chrdev(me4000_ao_major_driver_no, ME4000_AO_NAME); - INIT_ERROR_2: +INIT_ERROR_2: pci_unregister_driver(&me4000_driver); clear_board_info_list(); - INIT_ERROR_1: +INIT_ERROR_1: return result; } @@ -562,18 +539,18 @@ static void clear_board_info_list(void) { struct list_head *board_p; struct list_head *dac_p; - me4000_info_t *board_info; - me4000_ao_context_t *ao_context; + struct me4000_info *board_info; + struct me4000_ao_context *ao_context; /* Clear context lists */ for (board_p = me4000_board_info_list.next; board_p != &me4000_board_info_list; board_p = board_p->next) { - board_info = list_entry(board_p, me4000_info_t, list); + board_info = list_entry(board_p, struct me4000_info, list); /* Clear analog output context list */ while (!list_empty(&board_info->ao_context_list)) { dac_p = board_info->ao_context_list.next; ao_context = - list_entry(dac_p, me4000_ao_context_t, list); + list_entry(dac_p, struct me4000_ao_context, list); me4000_ao_reset(ao_context); free_irq(ao_context->irq, ao_context); if (ao_context->circ_buf.buf) @@ -600,14 +577,14 @@ static void clear_board_info_list(void) /* Clear the board info list */ while (!list_empty(&me4000_board_info_list)) { board_p = me4000_board_info_list.next; - board_info = list_entry(board_p, me4000_info_t, list); + board_info = list_entry(board_p, struct me4000_info, list); pci_release_regions(board_info->pci_dev_p); list_del(board_p); kfree(board_info); } } -static int get_registers(struct pci_dev *dev, me4000_info_t * board_info) +static int get_registers(struct pci_dev *dev, struct me4000_info *board_info) { /*--------------------------- plx regbase ---------------------------------*/ @@ -667,20 +644,20 @@ static int get_registers(struct pci_dev *dev, me4000_info_t * board_info) } static int init_board_info(struct pci_dev *pci_dev_p, - me4000_info_t * board_info) + struct me4000_info *board_info) { int i; int result; struct list_head *board_p; board_info->pci_dev_p = pci_dev_p; - for (i = 0; i < ME4000_BOARD_VERSIONS; i++) { + for (i = 0; i < ARRAY_SIZE(me4000_boards); i++) { if (me4000_boards[i].device_id == pci_dev_p->device) { board_info->board_p = &me4000_boards[i]; break; } } - if (i == ME4000_BOARD_VERSIONS) { + if (i == ARRAY_SIZE(me4000_boards)) { printk(KERN_ERR "ME4000:init_board_info():Device ID not valid\n"); return -ENODEV; @@ -755,21 +732,21 @@ static int init_board_info(struct pci_dev *pci_dev_p, return 0; } -static int alloc_ao_contexts(me4000_info_t * info) +static int alloc_ao_contexts(struct me4000_info *info) { int i; int err; - me4000_ao_context_t *ao_context; + struct me4000_ao_context *ao_context; for (i = 0; i < info->board_p->ao.count; i++) { - ao_context = kmalloc(sizeof(me4000_ao_context_t), GFP_KERNEL); + ao_context = kzalloc(sizeof(struct me4000_ao_context), + GFP_KERNEL); if (!ao_context) { printk(KERN_ERR "alloc_ao_contexts():Can't get memory for ao context\n"); release_ao_contexts(info); return -ENOMEM; } - memset(ao_context, 0, sizeof(me4000_ao_context_t)); spin_lock_init(&ao_context->use_lock); spin_lock_init(&ao_context->int_lock); @@ -780,15 +757,13 @@ static int alloc_ao_contexts(me4000_info_t * info) if (info->board_p->ao.fifo_count) { /* Allocate circular buffer */ ao_context->circ_buf.buf = - kmalloc(ME4000_AO_BUFFER_SIZE, GFP_KERNEL); + kzalloc(ME4000_AO_BUFFER_SIZE, GFP_KERNEL); if (!ao_context->circ_buf.buf) { printk(KERN_ERR "alloc_ao_contexts():Can't get circular buffer\n"); release_ao_contexts(info); return -ENOMEM; } - memset(ao_context->circ_buf.buf, 0, - ME4000_AO_BUFFER_SIZE); /* Clear the circular buffer */ ao_context->circ_buf.head = 0; @@ -872,9 +847,8 @@ static int alloc_ao_contexts(me4000_info_t * info) ME4000_NAME, ao_context); if (err) { printk(KERN_ERR - "alloc_ao_contexts():Can't get interrupt line"); - if (ao_context->circ_buf.buf) - kfree(ao_context->circ_buf.buf); + "%s:Can't get interrupt line", __func__); + kfree(ao_context->circ_buf.buf); kfree(ao_context); release_ao_contexts(info); return -ENODEV; @@ -888,35 +862,34 @@ static int alloc_ao_contexts(me4000_info_t * info) return 0; } -static void release_ao_contexts(me4000_info_t * board_info) +static void release_ao_contexts(struct me4000_info *board_info) { struct list_head *dac_p; - me4000_ao_context_t *ao_context; + struct me4000_ao_context *ao_context; /* Clear analog output context list */ while (!list_empty(&board_info->ao_context_list)) { dac_p = board_info->ao_context_list.next; - ao_context = list_entry(dac_p, me4000_ao_context_t, list); + ao_context = list_entry(dac_p, struct me4000_ao_context, list); free_irq(ao_context->irq, ao_context); - if (ao_context->circ_buf.buf) - kfree(ao_context->circ_buf.buf); + kfree(ao_context->circ_buf.buf); list_del(dac_p); kfree(ao_context); } } -static int alloc_ai_context(me4000_info_t * info) +static int alloc_ai_context(struct me4000_info *info) { - me4000_ai_context_t *ai_context; + struct me4000_ai_context *ai_context; if (info->board_p->ai.count) { - ai_context = kmalloc(sizeof(me4000_ai_context_t), GFP_KERNEL); + ai_context = kzalloc(sizeof(struct me4000_ai_context), + GFP_KERNEL); if (!ai_context) { printk(KERN_ERR "ME4000:alloc_ai_context():Can't get memory for ai context\n"); return -ENOMEM; } - memset(ai_context, 0, sizeof(me4000_ai_context_t)); info->ai_context = ai_context; @@ -958,18 +931,18 @@ static int alloc_ai_context(me4000_info_t * info) return 0; } -static int alloc_dio_context(me4000_info_t * info) +static int alloc_dio_context(struct me4000_info *info) { - me4000_dio_context_t *dio_context; + struct me4000_dio_context *dio_context; if (info->board_p->dio.count) { - dio_context = kmalloc(sizeof(me4000_dio_context_t), GFP_KERNEL); + dio_context = kzalloc(sizeof(struct me4000_dio_context), + GFP_KERNEL); if (!dio_context) { printk(KERN_ERR "ME4000:alloc_dio_context():Can't get memory for dio context\n"); return -ENOMEM; } - memset(dio_context, 0, sizeof(me4000_dio_context_t)); info->dio_context = dio_context; @@ -995,18 +968,18 @@ static int alloc_dio_context(me4000_info_t * info) return 0; } -static int alloc_cnt_context(me4000_info_t * info) +static int alloc_cnt_context(struct me4000_info *info) { - me4000_cnt_context_t *cnt_context; + struct me4000_cnt_context *cnt_context; if (info->board_p->cnt.count) { - cnt_context = kmalloc(sizeof(me4000_cnt_context_t), GFP_KERNEL); + cnt_context = kzalloc(sizeof(struct me4000_cnt_context), + GFP_KERNEL); if (!cnt_context) { printk(KERN_ERR "ME4000:alloc_cnt_context():Can't get memory for cnt context\n"); return -ENOMEM; } - memset(cnt_context, 0, sizeof(me4000_cnt_context_t)); info->cnt_context = cnt_context; @@ -1026,19 +999,18 @@ static int alloc_cnt_context(me4000_info_t * info) return 0; } -static int alloc_ext_int_context(me4000_info_t * info) +static int alloc_ext_int_context(struct me4000_info *info) { - me4000_ext_int_context_t *ext_int_context; + struct me4000_ext_int_context *ext_int_context; if (info->board_p->cnt.count) { ext_int_context = - kmalloc(sizeof(me4000_ext_int_context_t), GFP_KERNEL); + kzalloc(sizeof(struct me4000_ext_int_context), GFP_KERNEL); if (!ext_int_context) { printk(KERN_ERR "ME4000:alloc_ext_int_context():Can't get memory for cnt context\n"); return -ENOMEM; } - memset(ext_int_context, 0, sizeof(me4000_ext_int_context_t)); info->ext_int_context = ext_int_context; @@ -1060,19 +1032,18 @@ static int alloc_ext_int_context(me4000_info_t * info) static int me4000_probe(struct pci_dev *dev, const struct pci_device_id *id) { int result = 0; - me4000_info_t *board_info; + struct me4000_info *board_info; CALL_PDEBUG("me4000_probe() is executed\n"); /* Allocate structure for board context */ - board_info = kmalloc(sizeof(me4000_info_t), GFP_KERNEL); + board_info = kzalloc(sizeof(struct me4000_info), GFP_KERNEL); if (!board_info) { printk(KERN_ERR "ME4000:Can't get memory for board info structure\n"); result = -ENOMEM; goto PROBE_ERROR_1; } - memset(board_info, 0, sizeof(me4000_info_t)); /* Add to global linked list */ list_add_tail(&board_info->list, &me4000_board_info_list); @@ -1080,70 +1051,70 @@ static int me4000_probe(struct pci_dev *dev, const struct pci_device_id *id) /* Get the PCI base registers */ result = get_registers(dev, board_info); if (result) { - printk(KERN_ERR "me4000_probe():Cannot get registers\n"); + printk(KERN_ERR "%s:Cannot get registers\n", __func__); goto PROBE_ERROR_2; } /* Enable the device */ result = pci_enable_device(dev); if (result < 0) { - printk(KERN_ERR "me4000_probe():Cannot enable PCI device\n"); + printk(KERN_ERR "%s:Cannot enable PCI device\n", __func__); goto PROBE_ERROR_2; } /* Request the PCI register regions */ result = pci_request_regions(dev, ME4000_NAME); if (result < 0) { - printk(KERN_ERR "me4000_probe():Cannot request I/O regions\n"); + printk(KERN_ERR "%s:Cannot request I/O regions\n", __func__); goto PROBE_ERROR_2; } /* Initialize board info */ result = init_board_info(dev, board_info); if (result) { - printk(KERN_ERR "me4000_probe():Cannot init baord info\n"); + printk(KERN_ERR "%s:Cannot init baord info\n", __func__); goto PROBE_ERROR_3; } /* Download the xilinx firmware */ result = me4000_xilinx_download(board_info); if (result) { - printk(KERN_ERR "me4000_probe:Can't download firmware\n"); + printk(KERN_ERR "%s:Can't download firmware\n", __func__); goto PROBE_ERROR_3; } /* Make a hardware reset */ result = me4000_reset_board(board_info); if (result) { - printk(KERN_ERR "me4000_probe:Can't reset board\n"); + printk(KERN_ERR "%s :Can't reset board\n", __func__); goto PROBE_ERROR_3; } /* Allocate analog output context structures */ result = alloc_ao_contexts(board_info); if (result) { - printk(KERN_ERR "me4000_probe():Cannot allocate ao contexts\n"); + printk(KERN_ERR "%s:Cannot allocate ao contexts\n", __func__); goto PROBE_ERROR_3; } /* Allocate analog input context */ result = alloc_ai_context(board_info); if (result) { - printk(KERN_ERR "me4000_probe():Cannot allocate ai context\n"); + printk(KERN_ERR "%s:Cannot allocate ai context\n", __func__); goto PROBE_ERROR_4; } /* Allocate digital I/O context */ result = alloc_dio_context(board_info); if (result) { - printk(KERN_ERR "me4000_probe():Cannot allocate dio context\n"); + printk(KERN_ERR "%s:Cannot allocate dio context\n", __func__); goto PROBE_ERROR_5; } /* Allocate counter context */ result = alloc_cnt_context(board_info); if (result) { - printk(KERN_ERR "me4000_probe():Cannot allocate cnt context\n"); + printk(KERN_ERR "%s:Cannot allocate cnt context\n", __func__); goto PROBE_ERROR_6; } @@ -1151,36 +1122,36 @@ static int me4000_probe(struct pci_dev *dev, const struct pci_device_id *id) result = alloc_ext_int_context(board_info); if (result) { printk(KERN_ERR - "me4000_probe():Cannot allocate ext_int context\n"); + "%s:Cannot allocate ext_int context\n", __func__); goto PROBE_ERROR_7; } return 0; - PROBE_ERROR_7: +PROBE_ERROR_7: kfree(board_info->cnt_context); - PROBE_ERROR_6: +PROBE_ERROR_6: kfree(board_info->dio_context); - PROBE_ERROR_5: +PROBE_ERROR_5: kfree(board_info->ai_context); - PROBE_ERROR_4: +PROBE_ERROR_4: release_ao_contexts(board_info); - PROBE_ERROR_3: +PROBE_ERROR_3: pci_release_regions(dev); - PROBE_ERROR_2: +PROBE_ERROR_2: list_del(&board_info->list); kfree(board_info); - PROBE_ERROR_1: +PROBE_ERROR_1: return result; } -static int me4000_xilinx_download(me4000_info_t * info) +static int me4000_xilinx_download(struct me4000_info *info) { int size = 0; u32 value = 0; @@ -1211,7 +1182,7 @@ static int me4000_xilinx_download(me4000_info_t * info) /* Wait until /INIT pin is set */ udelay(20); if (!inl(info->plx_regbase + PLX_INTCSR) & 0x20) { - printk(KERN_ERR "me4000_xilinx_download():Can't init Xilinx\n"); + printk(KERN_ERR "%s:Can't init Xilinx\n", __func__); return -EIO; } @@ -1232,7 +1203,7 @@ static int me4000_xilinx_download(me4000_info_t * info) /* Check if BUSY flag is low */ if (inl(info->plx_regbase + PLX_ICR) & 0x20) { printk(KERN_ERR - "me4000_xilinx_download():Xilinx is still busy (idx = %d)\n", + "%s:Xilinx is still busy (idx = %d)\n", __func__, idx); return -EIO; } @@ -1246,9 +1217,9 @@ static int me4000_xilinx_download(me4000_info_t * info) PDEBUG("me4000_xilinx_download():Download was successful\n"); } else { printk(KERN_ERR - "ME4000:me4000_xilinx_download():DONE flag is not set\n"); + "ME4000:%s:DONE flag is not set\n", __func__); printk(KERN_ERR - "ME4000:me4000_xilinx_download():Download not succesful\n"); + "ME4000:%s:Download not succesful\n", __func__); return -EIO; } @@ -1260,7 +1231,7 @@ static int me4000_xilinx_download(me4000_info_t * info) return 0; } -static int me4000_reset_board(me4000_info_t * info) +static int me4000_reset_board(struct me4000_info *info) { unsigned long icr; @@ -1314,12 +1285,12 @@ static int me4000_open(struct inode *inode_p, struct file *file_p) int err = 0; int i; struct list_head *ptr; - me4000_info_t *board_info = NULL; - me4000_ao_context_t *ao_context = NULL; - me4000_ai_context_t *ai_context = NULL; - me4000_dio_context_t *dio_context = NULL; - me4000_cnt_context_t *cnt_context = NULL; - me4000_ext_int_context_t *ext_int_context = NULL; + struct me4000_info *board_info = NULL; + struct me4000_ao_context *ao_context = NULL; + struct me4000_ai_context *ai_context = NULL; + struct me4000_dio_context *dio_context = NULL; + struct me4000_cnt_context *cnt_context = NULL; + struct me4000_ext_int_context *ext_int_context = NULL; CALL_PDEBUG("me4000_open() is executed\n"); @@ -1335,7 +1306,7 @@ static int me4000_open(struct inode *inode_p, struct file *file_p) /* Search for the board context */ for (ptr = me4000_board_info_list.next, i = 0; ptr != &me4000_board_info_list; ptr = ptr->next, i++) { - board_info = list_entry(ptr, me4000_info_t, list); + board_info = list_entry(ptr, struct me4000_info, list); if (i == board) break; } @@ -1351,7 +1322,8 @@ static int me4000_open(struct inode *inode_p, struct file *file_p) for (ptr = board_info->ao_context_list.next, i = 0; ptr != &board_info->ao_context_list; ptr = ptr->next, i++) { - ao_context = list_entry(ptr, me4000_ao_context_t, list); + ao_context = list_entry(ptr, struct me4000_ao_context, + list); if (i == dev) break; } @@ -1415,7 +1387,7 @@ static int me4000_open(struct inode *inode_p, struct file *file_p) /* Search for the board context */ for (ptr = me4000_board_info_list.next, i = 0; ptr != &me4000_board_info_list; ptr = ptr->next, i++) { - board_info = list_entry(ptr, me4000_info_t, list); + board_info = list_entry(ptr, struct me4000_info, list); if (i == board) break; } @@ -1469,7 +1441,7 @@ static int me4000_open(struct inode *inode_p, struct file *file_p) /* Search for the board context */ for (ptr = me4000_board_info_list.next; ptr != &me4000_board_info_list; ptr = ptr->next) { - board_info = list_entry(ptr, me4000_info_t, list); + board_info = list_entry(ptr, struct me4000_info, list); if (board_info->board_count == board) break; } @@ -1514,7 +1486,7 @@ static int me4000_open(struct inode *inode_p, struct file *file_p) /* Search for the board context */ for (ptr = me4000_board_info_list.next; ptr != &me4000_board_info_list; ptr = ptr->next) { - board_info = list_entry(ptr, me4000_info_t, list); + board_info = list_entry(ptr, struct me4000_info, list); if (board_info->board_count == board) break; } @@ -1557,7 +1529,7 @@ static int me4000_open(struct inode *inode_p, struct file *file_p) /* Search for the board context */ for (ptr = me4000_board_info_list.next; ptr != &me4000_board_info_list; ptr = ptr->next) { - board_info = list_entry(ptr, me4000_info_t, list); + board_info = list_entry(ptr, struct me4000_info, list); if (board_info->board_count == board) break; } @@ -1613,11 +1585,11 @@ static int me4000_open(struct inode *inode_p, struct file *file_p) static int me4000_release(struct inode *inode_p, struct file *file_p) { - me4000_ao_context_t *ao_context; - me4000_ai_context_t *ai_context; - me4000_dio_context_t *dio_context; - me4000_cnt_context_t *cnt_context; - me4000_ext_int_context_t *ext_int_context; + struct me4000_ao_context *ao_context; + struct me4000_ai_context *ai_context; + struct me4000_dio_context *dio_context; + struct me4000_cnt_context *cnt_context; + struct me4000_ext_int_context *ext_int_context; CALL_PDEBUG("me4000_release() is executed\n"); @@ -1677,7 +1649,7 @@ static int me4000_release(struct inode *inode_p, struct file *file_p) /*------------------------------- Analog output stuff --------------------------------------*/ -static int me4000_ao_prepare(me4000_ao_context_t * ao_context) +static int me4000_ao_prepare(struct me4000_ao_context *ao_context) { unsigned long flags; @@ -1756,7 +1728,7 @@ static int me4000_ao_prepare(me4000_ao_context_t * ao_context) return 0; } -static int me4000_ao_reset(me4000_ao_context_t * ao_context) +static int me4000_ao_reset(struct me4000_ao_context *ao_context) { u32 tmp; wait_queue_head_t queue; @@ -1777,9 +1749,10 @@ static int me4000_ao_reset(me4000_ao_context_t * ao_context) tmp |= ME4000_AO_CTRL_BIT_IMMEDIATE_STOP; me4000_outl(tmp, ao_context->ctrl_reg); - while (inl(ao_context->status_reg) & ME4000_AO_STATUS_BIT_FSM) { - sleep_on_timeout(&queue, 1); - } + wait_event_timeout(queue, + (inl(ao_context->status_reg) & + ME4000_AO_STATUS_BIT_FSM) == 0, + 1); /* Set to transparent mode */ me4000_ao_simultaneous_disable(ao_context); @@ -1812,9 +1785,10 @@ static int me4000_ao_reset(me4000_ao_context_t * ao_context) me4000_outl(tmp, ao_context->ctrl_reg); spin_unlock_irqrestore(&ao_context->int_lock, flags); - while (inl(ao_context->status_reg) & ME4000_AO_STATUS_BIT_FSM) { - sleep_on_timeout(&queue, 1); - } + wait_event_timeout(queue, + (inl(ao_context->status_reg) & + ME4000_AO_STATUS_BIT_FSM) == 0, + 1); /* Clear the circular buffer */ ao_context->circ_buf.head = 0; @@ -1853,9 +1827,9 @@ static int me4000_ao_reset(me4000_ao_context_t * ao_context) } static ssize_t me4000_ao_write_sing(struct file *filep, const char *buff, - size_t cnt, loff_t * offp) + size_t cnt, loff_t *offp) { - me4000_ao_context_t *ao_context = filep->private_data; + struct me4000_ao_context *ao_context = filep->private_data; u32 value; const u16 *buffer = (const u16 *)buff; @@ -1863,13 +1837,13 @@ static ssize_t me4000_ao_write_sing(struct file *filep, const char *buff, if (cnt != 2) { printk(KERN_ERR - "me4000_ao_write_sing():Write count is not 2\n"); + "%s:Write count is not 2\n", __func__); return -EINVAL; } if (get_user(value, buffer)) { printk(KERN_ERR - "me4000_ao_write_sing():Cannot copy data from user\n"); + "%s:Cannot copy data from user\n", __func__); return -EFAULT; } @@ -1879,9 +1853,9 @@ static ssize_t me4000_ao_write_sing(struct file *filep, const char *buff, } static ssize_t me4000_ao_write_wrap(struct file *filep, const char *buff, - size_t cnt, loff_t * offp) + size_t cnt, loff_t *offp) { - me4000_ao_context_t *ao_context = filep->private_data; + struct me4000_ao_context *ao_context = filep->private_data; size_t i; u32 value; u32 tmp; @@ -1893,13 +1867,13 @@ static ssize_t me4000_ao_write_wrap(struct file *filep, const char *buff, /* Check if a conversion is already running */ if (inl(ao_context->status_reg) & ME4000_AO_STATUS_BIT_FSM) { printk(KERN_ERR - "ME4000:me4000_ao_write_wrap():There is already a conversion running\n"); + "%s:There is already a conversion running\n", __func__); return -EBUSY; } if (count > ME4000_AO_FIFO_COUNT) { printk(KERN_ERR - "me4000_ao_write_wrap():Can't load more than %d values\n", + "%s:Can't load more than %d values\n", __func__, ME4000_AO_FIFO_COUNT); return -ENOSPC; } @@ -1914,7 +1888,7 @@ static ssize_t me4000_ao_write_wrap(struct file *filep, const char *buff, for (i = 0; i < count; i++) { if (get_user(value, buffer + i)) { printk(KERN_ERR - "me4000_ao_write_single():Cannot copy data from user\n"); + "%s:Cannot copy data from user\n", __func__); return -EFAULT; } if (((ao_context->fifo_reg & 0xFF) == ME4000_AO_01_FIFO_REG) @@ -1928,9 +1902,9 @@ static ssize_t me4000_ao_write_wrap(struct file *filep, const char *buff, } static ssize_t me4000_ao_write_cont(struct file *filep, const char *buff, - size_t cnt, loff_t * offp) + size_t cnt, loff_t *offp) { - me4000_ao_context_t *ao_context = filep->private_data; + struct me4000_ao_context *ao_context = filep->private_data; const u16 *buffer = (const u16 *)buff; size_t count = cnt / 2; unsigned long flags; @@ -2154,9 +2128,9 @@ static ssize_t me4000_ao_write_cont(struct file *filep, const char *buff, return 2 * ret; } -static unsigned int me4000_ao_poll_cont(struct file *file_p, poll_table * wait) +static unsigned int me4000_ao_poll_cont(struct file *file_p, poll_table *wait) { - me4000_ao_context_t *ao_context; + struct me4000_ao_context *ao_context; unsigned long mask = 0; CALL_PDEBUG("me4000_ao_poll_cont() is executed\n"); @@ -2177,7 +2151,7 @@ static unsigned int me4000_ao_poll_cont(struct file *file_p, poll_table * wait) static int me4000_ao_fsync_cont(struct file *file_p, struct dentry *dentry_p, int datasync) { - me4000_ao_context_t *ao_context; + struct me4000_ao_context *ao_context; wait_queue_head_t queue; CALL_PDEBUG("me4000_ao_fsync_cont() is executed\n"); @@ -2187,15 +2161,19 @@ static int me4000_ao_fsync_cont(struct file *file_p, struct dentry *dentry_p, while (inl(ao_context->status_reg) & ME4000_AO_STATUS_BIT_FSM) { interruptible_sleep_on_timeout(&queue, 1); + wait_event_interruptible_timeout(queue, + !(inl(ao_context->status_reg) & ME4000_AO_STATUS_BIT_FSM), + 1); if (ao_context->pipe_flag) { printk(KERN_ERR - "me4000_ao_fsync_cont():Broken pipe detected\n"); + "%s:Broken pipe detected\n", __func__); return -EPIPE; } if (signal_pending(current)) { printk(KERN_ERR - "me4000_ao_fsync_cont():Wait on state machine interrupted\n"); + "%s:Wait on state machine interrupted\n", + __func__); return -EINTR; } } @@ -2206,7 +2184,7 @@ static int me4000_ao_fsync_cont(struct file *file_p, struct dentry *dentry_p, static int me4000_ao_ioctl_sing(struct inode *inode_p, struct file *file_p, unsigned int service, unsigned long arg) { - me4000_ao_context_t *ao_context; + struct me4000_ao_context *ao_context; CALL_PDEBUG("me4000_ao_ioctl_sing() is executed\n"); @@ -2229,7 +2207,7 @@ static int me4000_ao_ioctl_sing(struct inode *inode_p, struct file *file_p, case ME4000_AO_PRELOAD_UPDATE: return me4000_ao_preload_update(ao_context); case ME4000_GET_USER_INFO: - return me4000_get_user_info((me4000_user_info_t *) arg, + return me4000_get_user_info((struct me4000_user_info *)arg, ao_context->board_info); case ME4000_AO_SIMULTANEOUS_EX_TRIG: return me4000_ao_simultaneous_ex_trig(ao_context); @@ -2239,8 +2217,9 @@ static int me4000_ao_ioctl_sing(struct inode *inode_p, struct file *file_p, return me4000_ao_simultaneous_disable(ao_context); case ME4000_AO_SIMULTANEOUS_UPDATE: return - me4000_ao_simultaneous_update((me4000_ao_channel_list_t *) - arg, ao_context); + me4000_ao_simultaneous_update( + (struct me4000_ao_channel_list *)arg, + ao_context); case ME4000_AO_EX_TRIG_TIMEOUT: return me4000_ao_ex_trig_timeout((unsigned long *)arg, ao_context); @@ -2258,7 +2237,7 @@ static int me4000_ao_ioctl_sing(struct inode *inode_p, struct file *file_p, static int me4000_ao_ioctl_wrap(struct inode *inode_p, struct file *file_p, unsigned int service, unsigned long arg) { - me4000_ao_context_t *ao_context; + struct me4000_ao_context *ao_context; CALL_PDEBUG("me4000_ao_ioctl_wrap() is executed\n"); @@ -2287,7 +2266,7 @@ static int me4000_ao_ioctl_wrap(struct inode *inode_p, struct file *file_p, case ME4000_AO_EX_TRIG_DISABLE: return me4000_ao_ex_trig_disable(ao_context); case ME4000_GET_USER_INFO: - return me4000_get_user_info((me4000_user_info_t *) arg, + return me4000_get_user_info((struct me4000_user_info *)arg, ao_context->board_info); case ME4000_AO_FSM_STATE: return me4000_ao_fsm_state((int *)arg, ao_context); @@ -2310,7 +2289,7 @@ static int me4000_ao_ioctl_wrap(struct inode *inode_p, struct file *file_p, static int me4000_ao_ioctl_cont(struct inode *inode_p, struct file *file_p, unsigned int service, unsigned long arg) { - me4000_ao_context_t *ao_context; + struct me4000_ao_context *ao_context; CALL_PDEBUG("me4000_ao_ioctl_cont() is executed\n"); @@ -2345,7 +2324,7 @@ static int me4000_ao_ioctl_cont(struct inode *inode_p, struct file *file_p, case ME4000_AO_FSM_STATE: return me4000_ao_fsm_state((int *)arg, ao_context); case ME4000_GET_USER_INFO: - return me4000_get_user_info((me4000_user_info_t *) arg, + return me4000_get_user_info((struct me4000_user_info *)arg, ao_context->board_info); case ME4000_AO_SYNCHRONOUS_EX_TRIG: return me4000_ao_synchronous_ex_trig(ao_context); @@ -2362,7 +2341,8 @@ static int me4000_ao_ioctl_cont(struct inode *inode_p, struct file *file_p, return 0; } -static int me4000_ao_start(unsigned long *arg, me4000_ao_context_t * ao_context) +static int me4000_ao_start(unsigned long *arg, + struct me4000_ao_context *ao_context) { u32 tmp; wait_queue_head_t queue; @@ -2412,7 +2392,7 @@ static int me4000_ao_start(unsigned long *arg, me4000_ao_context_t * ao_context) return 0; } -static int me4000_ao_stop(me4000_ao_context_t * ao_context) +static int me4000_ao_stop(struct me4000_ao_context *ao_context) { u32 tmp; wait_queue_head_t queue; @@ -2445,7 +2425,7 @@ static int me4000_ao_stop(me4000_ao_context_t * ao_context) return 0; } -static int me4000_ao_immediate_stop(me4000_ao_context_t * ao_context) +static int me4000_ao_immediate_stop(struct me4000_ao_context *ao_context) { u32 tmp; wait_queue_head_t queue; @@ -2477,8 +2457,8 @@ static int me4000_ao_immediate_stop(me4000_ao_context_t * ao_context) return 0; } -static int me4000_ao_timer_set_divisor(u32 * arg, - me4000_ao_context_t * ao_context) +static int me4000_ao_timer_set_divisor(u32 *arg, + struct me4000_ao_context *ao_context) { u32 divisor; u32 tmp; @@ -2518,7 +2498,7 @@ static int me4000_ao_timer_set_divisor(u32 * arg, } static int me4000_ao_ex_trig_set_edge(int *arg, - me4000_ao_context_t * ao_context) + struct me4000_ao_context *ao_context) { int mode; u32 tmp; @@ -2569,7 +2549,7 @@ static int me4000_ao_ex_trig_set_edge(int *arg, return 0; } -static int me4000_ao_ex_trig_enable(me4000_ao_context_t * ao_context) +static int me4000_ao_ex_trig_enable(struct me4000_ao_context *ao_context) { u32 tmp; unsigned long flags; @@ -2593,7 +2573,7 @@ static int me4000_ao_ex_trig_enable(me4000_ao_context_t * ao_context) return 0; } -static int me4000_ao_ex_trig_disable(me4000_ao_context_t * ao_context) +static int me4000_ao_ex_trig_disable(struct me4000_ao_context *ao_context) { u32 tmp; unsigned long flags; @@ -2617,7 +2597,7 @@ static int me4000_ao_ex_trig_disable(me4000_ao_context_t * ao_context) return 0; } -static int me4000_ao_simultaneous_disable(me4000_ao_context_t * ao_context) +static int me4000_ao_simultaneous_disable(struct me4000_ao_context *ao_context) { u32 tmp; @@ -2643,7 +2623,7 @@ static int me4000_ao_simultaneous_disable(me4000_ao_context_t * ao_context) return 0; } -static int me4000_ao_simultaneous_ex_trig(me4000_ao_context_t * ao_context) +static int me4000_ao_simultaneous_ex_trig(struct me4000_ao_context *ao_context) { u32 tmp; @@ -2659,7 +2639,7 @@ static int me4000_ao_simultaneous_ex_trig(me4000_ao_context_t * ao_context) return 0; } -static int me4000_ao_simultaneous_sw(me4000_ao_context_t * ao_context) +static int me4000_ao_simultaneous_sw(struct me4000_ao_context *ao_context) { u32 tmp; @@ -2675,13 +2655,13 @@ static int me4000_ao_simultaneous_sw(me4000_ao_context_t * ao_context) return 0; } -static int me4000_ao_preload(me4000_ao_context_t * ao_context) +static int me4000_ao_preload(struct me4000_ao_context *ao_context) { CALL_PDEBUG("me4000_ao_preload() is executed\n"); return me4000_ao_simultaneous_sw(ao_context); } -static int me4000_ao_preload_update(me4000_ao_context_t * ao_context) +static int me4000_ao_preload_update(struct me4000_ao_context *ao_context) { u32 tmp; u32 ctrl; @@ -2705,10 +2685,12 @@ static int me4000_ao_preload_update(me4000_ao_context_t * ao_context) if (! (tmp & (0x1 << - (((me4000_ao_context_t *) entry)->index + 16)))) { + (((struct me4000_ao_context *)entry)->index + + 16)))) { tmp &= ~(0x1 << - (((me4000_ao_context_t *) entry)->index)); + (((struct me4000_ao_context *)entry)-> + index)); } } } @@ -2718,18 +2700,19 @@ static int me4000_ao_preload_update(me4000_ao_context_t * ao_context) return 0; } -static int me4000_ao_simultaneous_update(me4000_ao_channel_list_t * arg, - me4000_ao_context_t * ao_context) +static int me4000_ao_simultaneous_update(struct me4000_ao_channel_list *arg, + struct me4000_ao_context *ao_context) { int err; int i; u32 tmp; - me4000_ao_channel_list_t channels; + struct me4000_ao_channel_list channels; CALL_PDEBUG("me4000_ao_simultaneous_update() is executed\n"); /* Copy data from user */ - err = copy_from_user(&channels, arg, sizeof(me4000_ao_channel_list_t)); + err = copy_from_user(&channels, arg, + sizeof(struct me4000_ao_channel_list)); if (err) { printk(KERN_ERR "ME4000:me4000_ao_simultaneous_update():Can't copy command\n"); @@ -2737,13 +2720,12 @@ static int me4000_ao_simultaneous_update(me4000_ao_channel_list_t * arg, } channels.list = - kmalloc(sizeof(unsigned long) * channels.count, GFP_KERNEL); + kzalloc(sizeof(unsigned long) * channels.count, GFP_KERNEL); if (!channels.list) { printk(KERN_ERR "ME4000:me4000_ao_simultaneous_update():Can't get buffer\n"); return -ENOMEM; } - memset(channels.list, 0, sizeof(unsigned long) * channels.count); /* Copy channel list from user */ err = @@ -2777,7 +2759,7 @@ static int me4000_ao_simultaneous_update(me4000_ao_channel_list_t * arg, return 0; } -static int me4000_ao_synchronous_ex_trig(me4000_ao_context_t * ao_context) +static int me4000_ao_synchronous_ex_trig(struct me4000_ao_context *ao_context) { u32 tmp; unsigned long flags; @@ -2813,7 +2795,7 @@ static int me4000_ao_synchronous_ex_trig(me4000_ao_context_t * ao_context) return 0; } -static int me4000_ao_synchronous_sw(me4000_ao_context_t * ao_context) +static int me4000_ao_synchronous_sw(struct me4000_ao_context *ao_context) { u32 tmp; unsigned long flags; @@ -2848,13 +2830,13 @@ static int me4000_ao_synchronous_sw(me4000_ao_context_t * ao_context) return 0; } -static int me4000_ao_synchronous_disable(me4000_ao_context_t * ao_context) +static int me4000_ao_synchronous_disable(struct me4000_ao_context *ao_context) { return me4000_ao_simultaneous_disable(ao_context); } static int me4000_ao_get_free_buffer(unsigned long *arg, - me4000_ao_context_t * ao_context) + struct me4000_ao_context *ao_context) { unsigned long c; int err; @@ -2864,7 +2846,7 @@ static int me4000_ao_get_free_buffer(unsigned long *arg, err = copy_to_user(arg, &c, sizeof(unsigned long)); if (err) { printk(KERN_ERR - "ME4000:me4000_ao_get_free_buffer():Can't copy to user space\n"); + "%s:Can't copy to user space\n", __func__); return -EFAULT; } @@ -2872,7 +2854,7 @@ static int me4000_ao_get_free_buffer(unsigned long *arg, } static int me4000_ao_ex_trig_timeout(unsigned long *arg, - me4000_ao_context_t * ao_context) + struct me4000_ao_context *ao_context) { u32 tmp; wait_queue_head_t queue; @@ -2928,7 +2910,7 @@ static int me4000_ao_ex_trig_timeout(unsigned long *arg, return 0; } -static int me4000_ao_enable_do(me4000_ao_context_t * ao_context) +static int me4000_ao_enable_do(struct me4000_ao_context *ao_context) { u32 tmp; unsigned long flags; @@ -2959,7 +2941,7 @@ static int me4000_ao_enable_do(me4000_ao_context_t * ao_context) return 0; } -static int me4000_ao_disable_do(me4000_ao_context_t * ao_context) +static int me4000_ao_disable_do(struct me4000_ao_context *ao_context) { u32 tmp; unsigned long flags; @@ -2989,7 +2971,7 @@ static int me4000_ao_disable_do(me4000_ao_context_t * ao_context) return 0; } -static int me4000_ao_fsm_state(int *arg, me4000_ao_context_t * ao_context) +static int me4000_ao_fsm_state(int *arg, struct me4000_ao_context *ao_context) { unsigned long tmp; @@ -3012,9 +2994,9 @@ static int me4000_ao_fsm_state(int *arg, me4000_ao_context_t * ao_context) return 0; } -/*------------------------------- Analog input stuff --------------------------------------*/ +/*------------------------- Analog input stuff -------------------------------*/ -static int me4000_ai_prepare(me4000_ai_context_t * ai_context) +static int me4000_ai_prepare(struct me4000_ai_context *ai_context) { wait_queue_head_t queue; int err; @@ -3057,14 +3039,13 @@ static int me4000_ai_prepare(me4000_ai_context_t * ai_context) /* Allocate circular buffer */ ai_context->circ_buf.buf = - kmalloc(ME4000_AI_BUFFER_SIZE, GFP_KERNEL); + kzalloc(ME4000_AI_BUFFER_SIZE, GFP_KERNEL); if (!ai_context->circ_buf.buf) { printk(KERN_ERR "ME4000:me4000_ai_prepare():Can't get circular buffer\n"); free_irq(ai_context->irq, ai_context); return -ENOMEM; } - memset(ai_context->circ_buf.buf, 0, ME4000_AI_BUFFER_SIZE); /* Clear the circular buffer */ ai_context->circ_buf.head = 0; @@ -3074,7 +3055,7 @@ static int me4000_ai_prepare(me4000_ai_context_t * ai_context) return 0; } -static int me4000_ai_reset(me4000_ai_context_t * ai_context) +static int me4000_ai_reset(struct me4000_ai_context *ai_context) { wait_queue_head_t queue; u32 tmp; @@ -3139,7 +3120,7 @@ static int me4000_ai_reset(me4000_ai_context_t * ai_context) static int me4000_ai_ioctl_sing(struct inode *inode_p, struct file *file_p, unsigned int service, unsigned long arg) { - me4000_ai_context_t *ai_context; + struct me4000_ai_context *ai_context; CALL_PDEBUG("me4000_ai_ioctl_sing() is executed\n"); @@ -3157,16 +3138,17 @@ static int me4000_ai_ioctl_sing(struct inode *inode_p, struct file *file_p, switch (service) { case ME4000_AI_SINGLE: - return me4000_ai_single((me4000_ai_single_t *) arg, ai_context); + return me4000_ai_single((struct me4000_ai_single *)arg, + ai_context); case ME4000_AI_EX_TRIG_ENABLE: return me4000_ai_ex_trig_enable(ai_context); case ME4000_AI_EX_TRIG_DISABLE: return me4000_ai_ex_trig_disable(ai_context); case ME4000_AI_EX_TRIG_SETUP: - return me4000_ai_ex_trig_setup((me4000_ai_trigger_t *) arg, + return me4000_ai_ex_trig_setup((struct me4000_ai_trigger *)arg, ai_context); case ME4000_GET_USER_INFO: - return me4000_get_user_info((me4000_user_info_t *) arg, + return me4000_get_user_info((struct me4000_user_info *)arg, ai_context->board_info); case ME4000_AI_OFFSET_ENABLE: return me4000_ai_offset_enable(ai_context); @@ -3177,9 +3159,11 @@ static int me4000_ai_ioctl_sing(struct inode *inode_p, struct file *file_p, case ME4000_AI_FULLSCALE_DISABLE: return me4000_ai_fullscale_disable(ai_context); case ME4000_AI_EEPROM_READ: - return me4000_eeprom_read((me4000_eeprom_t *) arg, ai_context); + return me4000_eeprom_read((struct me4000_eeprom *)arg, + ai_context); case ME4000_AI_EEPROM_WRITE: - return me4000_eeprom_write((me4000_eeprom_t *) arg, ai_context); + return me4000_eeprom_write((struct me4000_eeprom *)arg, + ai_context); default: printk(KERN_ERR "me4000_ai_ioctl_sing():Invalid service number\n"); @@ -3188,10 +3172,10 @@ static int me4000_ai_ioctl_sing(struct inode *inode_p, struct file *file_p, return 0; } -static int me4000_ai_single(me4000_ai_single_t * arg, - me4000_ai_context_t * ai_context) +static int me4000_ai_single(struct me4000_ai_single *arg, + struct me4000_ai_context *ai_context) { - me4000_ai_single_t cmd; + struct me4000_ai_single cmd; int err; u32 tmp; wait_queue_head_t queue; @@ -3202,7 +3186,7 @@ static int me4000_ai_single(me4000_ai_single_t * arg, init_waitqueue_head(&queue); /* Copy data from user */ - err = copy_from_user(&cmd, arg, sizeof(me4000_ai_single_t)); + err = copy_from_user(&cmd, arg, sizeof(struct me4000_ai_single)); if (err) { printk(KERN_ERR "ME4000:me4000_ai_single():Can't copy from user space\n"); @@ -3301,7 +3285,7 @@ static int me4000_ai_single(me4000_ai_single_t * arg, cmd.value = me4000_inl(ai_context->data_reg) & 0xFFFF; /* Copy result back to user */ - err = copy_to_user(arg, &cmd, sizeof(me4000_ai_single_t)); + err = copy_to_user(arg, &cmd, sizeof(struct me4000_ai_single)); if (err) { printk(KERN_ERR "ME4000:me4000_ai_single():Can't copy to user space\n"); @@ -3314,7 +3298,7 @@ static int me4000_ai_single(me4000_ai_single_t * arg, static int me4000_ai_ioctl_sw(struct inode *inode_p, struct file *file_p, unsigned int service, unsigned long arg) { - me4000_ai_context_t *ai_context; + struct me4000_ai_context *ai_context; CALL_PDEBUG("me4000_ai_ioctl_sw() is executed\n"); @@ -3332,9 +3316,11 @@ static int me4000_ai_ioctl_sw(struct inode *inode_p, struct file *file_p, switch (service) { case ME4000_AI_SC_SETUP: - return me4000_ai_sc_setup((me4000_ai_sc_t *) arg, ai_context); + return me4000_ai_sc_setup((struct me4000_ai_sc *)arg, + ai_context); case ME4000_AI_CONFIG: - return me4000_ai_config((me4000_ai_config_t *) arg, ai_context); + return me4000_ai_config((struct me4000_ai_config *)arg, + ai_context); case ME4000_AI_START: return me4000_ai_start(ai_context); case ME4000_AI_STOP: @@ -3344,19 +3330,20 @@ static int me4000_ai_ioctl_sw(struct inode *inode_p, struct file *file_p, case ME4000_AI_FSM_STATE: return me4000_ai_fsm_state((int *)arg, ai_context); case ME4000_GET_USER_INFO: - return me4000_get_user_info((me4000_user_info_t *) arg, + return me4000_get_user_info((struct me4000_user_info *)arg, ai_context->board_info); case ME4000_AI_EEPROM_READ: - return me4000_eeprom_read((me4000_eeprom_t *) arg, ai_context); + return me4000_eeprom_read((struct me4000_eeprom *)arg, + ai_context); case ME4000_AI_EEPROM_WRITE: - return me4000_eeprom_write((me4000_eeprom_t *) arg, ai_context); + return me4000_eeprom_write((struct me4000_eeprom *)arg, + ai_context); case ME4000_AI_GET_COUNT_BUFFER: return me4000_ai_get_count_buffer((unsigned long *)arg, ai_context); default: printk(KERN_ERR - "ME4000:me4000_ai_ioctl_sw():Invalid service number %d\n", - service); + "%s:Invalid service number %d\n", __func__, service); return -ENOTTY; } return 0; @@ -3365,7 +3352,7 @@ static int me4000_ai_ioctl_sw(struct inode *inode_p, struct file *file_p, static int me4000_ai_ioctl_ext(struct inode *inode_p, struct file *file_p, unsigned int service, unsigned long arg) { - me4000_ai_context_t *ai_context; + struct me4000_ai_context *ai_context; CALL_PDEBUG("me4000_ai_ioctl_ext() is executed\n"); @@ -3383,9 +3370,11 @@ static int me4000_ai_ioctl_ext(struct inode *inode_p, struct file *file_p, switch (service) { case ME4000_AI_SC_SETUP: - return me4000_ai_sc_setup((me4000_ai_sc_t *) arg, ai_context); + return me4000_ai_sc_setup((struct me4000_ai_sc *)arg, + ai_context); case ME4000_AI_CONFIG: - return me4000_ai_config((me4000_ai_config_t *) arg, ai_context); + return me4000_ai_config((struct me4000_ai_config *)arg, + ai_context); case ME4000_AI_START: return me4000_ai_start_ex((unsigned long *)arg, ai_context); case ME4000_AI_STOP: @@ -3397,20 +3386,19 @@ static int me4000_ai_ioctl_ext(struct inode *inode_p, struct file *file_p, case ME4000_AI_EX_TRIG_DISABLE: return me4000_ai_ex_trig_disable(ai_context); case ME4000_AI_EX_TRIG_SETUP: - return me4000_ai_ex_trig_setup((me4000_ai_trigger_t *) arg, + return me4000_ai_ex_trig_setup((struct me4000_ai_trigger *)arg, ai_context); case ME4000_AI_FSM_STATE: return me4000_ai_fsm_state((int *)arg, ai_context); case ME4000_GET_USER_INFO: - return me4000_get_user_info((me4000_user_info_t *) arg, + return me4000_get_user_info((struct me4000_user_info *)arg, ai_context->board_info); case ME4000_AI_GET_COUNT_BUFFER: return me4000_ai_get_count_buffer((unsigned long *)arg, ai_context); default: printk(KERN_ERR - "ME4000:me4000_ai_ioctl_ext():Invalid service number %d\n", - service); + "%s:Invalid service number %d\n", __func__ , service); return -ENOTTY; } return 0; @@ -3418,7 +3406,7 @@ static int me4000_ai_ioctl_ext(struct inode *inode_p, struct file *file_p, static int me4000_ai_fasync(int fd, struct file *file_p, int mode) { - me4000_ai_context_t *ai_context; + struct me4000_ai_context *ai_context; CALL_PDEBUG("me4000_ao_fasync_cont() is executed\n"); @@ -3426,10 +3414,10 @@ static int me4000_ai_fasync(int fd, struct file *file_p, int mode) return fasync_helper(fd, file_p, mode, &ai_context->fasync_p); } -static int me4000_ai_config(me4000_ai_config_t * arg, - me4000_ai_context_t * ai_context) +static int me4000_ai_config(struct me4000_ai_config *arg, + struct me4000_ai_context *ai_context) { - me4000_ai_config_t cmd; + struct me4000_ai_config cmd; u32 *list = NULL; u32 mode; int i; @@ -3451,7 +3439,7 @@ static int me4000_ai_config(me4000_ai_config_t * arg, } /* Copy data from user */ - err = copy_from_user(&cmd, arg, sizeof(me4000_ai_config_t)); + err = copy_from_user(&cmd, arg, sizeof(struct me4000_ai_config)); if (err) { printk(KERN_ERR "ME4000:me4000_ai_config():Can't copy from user space\n"); @@ -3671,7 +3659,7 @@ static int me4000_ai_config(me4000_ai_config_t * arg, return 0; - AI_CONFIG_ERR: +AI_CONFIG_ERR: /* Reset the timers */ ai_context->chan_timer = 66; @@ -3699,7 +3687,7 @@ static int me4000_ai_config(me4000_ai_config_t * arg, } -static int ai_common_start(me4000_ai_context_t * ai_context) +static int ai_common_start(struct me4000_ai_context *ai_context) { u32 tmp; CALL_PDEBUG("ai_common_start() is executed\n"); @@ -3762,7 +3750,7 @@ static int ai_common_start(me4000_ai_context_t * ai_context) return 0; } -static int me4000_ai_start(me4000_ai_context_t * ai_context) +static int me4000_ai_start(struct me4000_ai_context *ai_context) { int err; CALL_PDEBUG("me4000_ai_start() is executed\n"); @@ -3779,7 +3767,7 @@ static int me4000_ai_start(me4000_ai_context_t * ai_context) } static int me4000_ai_start_ex(unsigned long *arg, - me4000_ai_context_t * ai_context) + struct me4000_ai_context *ai_context) { int err; wait_queue_head_t queue; @@ -3834,7 +3822,7 @@ static int me4000_ai_start_ex(unsigned long *arg, return 0; } -static int me4000_ai_stop(me4000_ai_context_t * ai_context) +static int me4000_ai_stop(struct me4000_ai_context *ai_context) { wait_queue_head_t queue; u32 tmp; @@ -3871,7 +3859,7 @@ static int me4000_ai_stop(me4000_ai_context_t * ai_context) return 0; } -static int me4000_ai_immediate_stop(me4000_ai_context_t * ai_context) +static int me4000_ai_immediate_stop(struct me4000_ai_context *ai_context) { wait_queue_head_t queue; u32 tmp; @@ -3908,7 +3896,7 @@ static int me4000_ai_immediate_stop(me4000_ai_context_t * ai_context) return 0; } -static int me4000_ai_ex_trig_enable(me4000_ai_context_t * ai_context) +static int me4000_ai_ex_trig_enable(struct me4000_ai_context *ai_context) { u32 tmp; unsigned long flags; @@ -3924,7 +3912,7 @@ static int me4000_ai_ex_trig_enable(me4000_ai_context_t * ai_context) return 0; } -static int me4000_ai_ex_trig_disable(me4000_ai_context_t * ai_context) +static int me4000_ai_ex_trig_disable(struct me4000_ai_context *ai_context) { u32 tmp; unsigned long flags; @@ -3940,10 +3928,10 @@ static int me4000_ai_ex_trig_disable(me4000_ai_context_t * ai_context) return 0; } -static int me4000_ai_ex_trig_setup(me4000_ai_trigger_t * arg, - me4000_ai_context_t * ai_context) +static int me4000_ai_ex_trig_setup(struct me4000_ai_trigger *arg, + struct me4000_ai_context *ai_context) { - me4000_ai_trigger_t cmd; + struct me4000_ai_trigger cmd; int err; u32 tmp; unsigned long flags; @@ -3951,7 +3939,7 @@ static int me4000_ai_ex_trig_setup(me4000_ai_trigger_t * arg, CALL_PDEBUG("me4000_ai_ex_trig_setup() is executed\n"); /* Copy data from user */ - err = copy_from_user(&cmd, arg, sizeof(me4000_ai_trigger_t)); + err = copy_from_user(&cmd, arg, sizeof(struct me4000_ai_trigger)); if (err) { printk(KERN_ERR "ME4000:me4000_ai_ex_trig_setup():Can't copy from user space\n"); @@ -4000,16 +3988,16 @@ static int me4000_ai_ex_trig_setup(me4000_ai_trigger_t * arg, return 0; } -static int me4000_ai_sc_setup(me4000_ai_sc_t * arg, - me4000_ai_context_t * ai_context) +static int me4000_ai_sc_setup(struct me4000_ai_sc *arg, + struct me4000_ai_context *ai_context) { - me4000_ai_sc_t cmd; + struct me4000_ai_sc cmd; int err; CALL_PDEBUG("me4000_ai_sc_setup() is executed\n"); /* Copy data from user */ - err = copy_from_user(&cmd, arg, sizeof(me4000_ai_sc_t)); + err = copy_from_user(&cmd, arg, sizeof(struct me4000_ai_sc)); if (err) { printk(KERN_ERR "ME4000:me4000_ai_sc_setup():Can't copy from user space\n"); @@ -4023,9 +4011,9 @@ static int me4000_ai_sc_setup(me4000_ai_sc_t * arg, } static ssize_t me4000_ai_read(struct file *filep, char *buff, size_t cnt, - loff_t * offp) + loff_t *offp) { - me4000_ai_context_t *ai_context = filep->private_data; + struct me4000_ai_context *ai_context = filep->private_data; s16 *buffer = (s16 *) buff; size_t count = cnt / 2; unsigned long flags; @@ -4150,9 +4138,9 @@ static ssize_t me4000_ai_read(struct file *filep, char *buff, size_t cnt, return ret * 2; } -static unsigned int me4000_ai_poll(struct file *file_p, poll_table * wait) +static unsigned int me4000_ai_poll(struct file *file_p, poll_table *wait) { - me4000_ai_context_t *ai_context; + struct me4000_ai_context *ai_context; unsigned long mask = 0; CALL_PDEBUG("me4000_ai_poll() is executed\n"); @@ -4171,7 +4159,7 @@ static unsigned int me4000_ai_poll(struct file *file_p, poll_table * wait) return mask; } -static int me4000_ai_offset_enable(me4000_ai_context_t * ai_context) +static int me4000_ai_offset_enable(struct me4000_ai_context *ai_context) { unsigned long tmp; @@ -4184,7 +4172,7 @@ static int me4000_ai_offset_enable(me4000_ai_context_t * ai_context) return 0; } -static int me4000_ai_offset_disable(me4000_ai_context_t * ai_context) +static int me4000_ai_offset_disable(struct me4000_ai_context *ai_context) { unsigned long tmp; @@ -4197,7 +4185,7 @@ static int me4000_ai_offset_disable(me4000_ai_context_t * ai_context) return 0; } -static int me4000_ai_fullscale_enable(me4000_ai_context_t * ai_context) +static int me4000_ai_fullscale_enable(struct me4000_ai_context *ai_context) { unsigned long tmp; @@ -4210,7 +4198,7 @@ static int me4000_ai_fullscale_enable(me4000_ai_context_t * ai_context) return 0; } -static int me4000_ai_fullscale_disable(me4000_ai_context_t * ai_context) +static int me4000_ai_fullscale_disable(struct me4000_ai_context *ai_context) { unsigned long tmp; @@ -4223,7 +4211,7 @@ static int me4000_ai_fullscale_disable(me4000_ai_context_t * ai_context) return 0; } -static int me4000_ai_fsm_state(int *arg, me4000_ai_context_t * ai_context) +static int me4000_ai_fsm_state(int *arg, struct me4000_ai_context *ai_context) { unsigned long tmp; @@ -4242,7 +4230,7 @@ static int me4000_ai_fsm_state(int *arg, me4000_ai_context_t * ai_context) } static int me4000_ai_get_count_buffer(unsigned long *arg, - me4000_ai_context_t * ai_context) + struct me4000_ai_context *ai_context) { unsigned long c; int err; @@ -4252,7 +4240,7 @@ static int me4000_ai_get_count_buffer(unsigned long *arg, err = copy_to_user(arg, &c, sizeof(unsigned long)); if (err) { printk(KERN_ERR - "ME4000:me4000_ai_get_count_buffer():Can't copy to user space\n"); + "%s:Can't copy to user space\n", __func__); return -EFAULT; } @@ -4261,7 +4249,7 @@ static int me4000_ai_get_count_buffer(unsigned long *arg, /*---------------------------------- EEPROM stuff ---------------------------*/ -static int eeprom_write_cmd(me4000_ai_context_t * ai_context, unsigned long cmd, +static int eeprom_write_cmd(struct me4000_ai_context *ai_context, unsigned long cmd, int length) { int i; @@ -4318,7 +4306,7 @@ static int eeprom_write_cmd(me4000_ai_context_t * ai_context, unsigned long cmd, return 0; } -static unsigned short eeprom_read_cmd(me4000_ai_context_t * ai_context, +static unsigned short eeprom_read_cmd(struct me4000_ai_context *ai_context, unsigned long cmd, int length) { int i; @@ -4397,11 +4385,11 @@ static unsigned short eeprom_read_cmd(me4000_ai_context_t * ai_context, return id; } -static int me4000_eeprom_write(me4000_eeprom_t * arg, - me4000_ai_context_t * ai_context) +static int me4000_eeprom_write(struct me4000_eeprom *arg, + struct me4000_ai_context *ai_context) { int err; - me4000_eeprom_t setup; + struct me4000_eeprom setup; unsigned long cmd; unsigned long date_high; unsigned long date_low; @@ -4594,12 +4582,12 @@ static int me4000_eeprom_write(me4000_eeprom_t * arg, return 0; } -static int me4000_eeprom_read(me4000_eeprom_t * arg, - me4000_ai_context_t * ai_context) +static int me4000_eeprom_read(struct me4000_eeprom *arg, + struct me4000_ai_context *ai_context) { int err; unsigned long cmd; - me4000_eeprom_t setup; + struct me4000_eeprom setup; CALL_PDEBUG("me4000_eeprom_read() is executed\n"); @@ -4687,7 +4675,7 @@ static int me4000_eeprom_read(me4000_eeprom_t * arg, static int me4000_dio_ioctl(struct inode *inode_p, struct file *file_p, unsigned int service, unsigned long arg) { - me4000_dio_context_t *dio_context; + struct me4000_dio_context *dio_context; CALL_PDEBUG("me4000_dio_ioctl() is executed\n"); @@ -4704,13 +4692,13 @@ static int me4000_dio_ioctl(struct inode *inode_p, struct file *file_p, switch (service) { case ME4000_DIO_CONFIG: - return me4000_dio_config((me4000_dio_config_t *) arg, + return me4000_dio_config((struct me4000_dio_config *)arg, dio_context); case ME4000_DIO_SET_BYTE: - return me4000_dio_set_byte((me4000_dio_byte_t *) arg, + return me4000_dio_set_byte((struct me4000_dio_byte *)arg, dio_context); case ME4000_DIO_GET_BYTE: - return me4000_dio_get_byte((me4000_dio_byte_t *) arg, + return me4000_dio_get_byte((struct me4000_dio_byte *)arg, dio_context); case ME4000_DIO_RESET: return me4000_dio_reset(dio_context); @@ -4723,17 +4711,17 @@ static int me4000_dio_ioctl(struct inode *inode_p, struct file *file_p, return 0; } -static int me4000_dio_config(me4000_dio_config_t * arg, - me4000_dio_context_t * dio_context) +static int me4000_dio_config(struct me4000_dio_config *arg, + struct me4000_dio_context *dio_context) { - me4000_dio_config_t cmd; + struct me4000_dio_config cmd; u32 tmp; int err; CALL_PDEBUG("me4000_dio_config() is executed\n"); /* Copy data from user */ - err = copy_from_user(&cmd, arg, sizeof(me4000_dio_config_t)); + err = copy_from_user(&cmd, arg, sizeof(struct me4000_dio_config)); if (err) { printk(KERN_ERR "ME4000:me4000_dio_config():Can't copy from user space\n"); @@ -4964,16 +4952,16 @@ static int me4000_dio_config(me4000_dio_config_t * arg, return 0; } -static int me4000_dio_set_byte(me4000_dio_byte_t * arg, - me4000_dio_context_t * dio_context) +static int me4000_dio_set_byte(struct me4000_dio_byte *arg, + struct me4000_dio_context *dio_context) { - me4000_dio_byte_t cmd; + struct me4000_dio_byte cmd; int err; CALL_PDEBUG("me4000_dio_set_byte() is executed\n"); /* Copy data from user */ - err = copy_from_user(&cmd, arg, sizeof(me4000_dio_byte_t)); + err = copy_from_user(&cmd, arg, sizeof(struct me4000_dio_byte)); if (err) { printk(KERN_ERR "ME4000:me4000_dio_set_byte():Can't copy from user space\n"); @@ -5030,16 +5018,16 @@ static int me4000_dio_set_byte(me4000_dio_byte_t * arg, return 0; } -static int me4000_dio_get_byte(me4000_dio_byte_t * arg, - me4000_dio_context_t * dio_context) +static int me4000_dio_get_byte(struct me4000_dio_byte *arg, + struct me4000_dio_context *dio_context) { - me4000_dio_byte_t cmd; + struct me4000_dio_byte cmd; int err; CALL_PDEBUG("me4000_dio_get_byte() is executed\n"); /* Copy data from user */ - err = copy_from_user(&cmd, arg, sizeof(me4000_dio_byte_t)); + err = copy_from_user(&cmd, arg, sizeof(struct me4000_dio_byte)); if (err) { printk(KERN_ERR "ME4000:me4000_dio_get_byte():Can't copy from user space\n"); @@ -5070,7 +5058,7 @@ static int me4000_dio_get_byte(me4000_dio_byte_t * arg, } /* Copy result back to user */ - err = copy_to_user(arg, &cmd, sizeof(me4000_dio_byte_t)); + err = copy_to_user(arg, &cmd, sizeof(struct me4000_dio_byte)); if (err) { printk(KERN_ERR "ME4000:me4000_dio_get_byte():Can't copy to user space\n"); @@ -5080,7 +5068,7 @@ static int me4000_dio_get_byte(me4000_dio_byte_t * arg, return 0; } -static int me4000_dio_reset(me4000_dio_context_t * dio_context) +static int me4000_dio_reset(struct me4000_dio_context *dio_context) { CALL_PDEBUG("me4000_dio_reset() is executed\n"); @@ -5101,7 +5089,7 @@ static int me4000_dio_reset(me4000_dio_context_t * dio_context) static int me4000_cnt_ioctl(struct inode *inode_p, struct file *file_p, unsigned int service, unsigned long arg) { - me4000_cnt_context_t *cnt_context; + struct me4000_cnt_context *cnt_context; CALL_PDEBUG("me4000_cnt_ioctl() is executed\n"); @@ -5118,11 +5106,11 @@ static int me4000_cnt_ioctl(struct inode *inode_p, struct file *file_p, switch (service) { case ME4000_CNT_READ: - return me4000_cnt_read((me4000_cnt_t *) arg, cnt_context); + return me4000_cnt_read((struct me4000_cnt *)arg, cnt_context); case ME4000_CNT_WRITE: - return me4000_cnt_write((me4000_cnt_t *) arg, cnt_context); + return me4000_cnt_write((struct me4000_cnt *)arg, cnt_context); case ME4000_CNT_CONFIG: - return me4000_cnt_config((me4000_cnt_config_t *) arg, + return me4000_cnt_config((struct me4000_cnt_config *)arg, cnt_context); case ME4000_CNT_RESET: return me4000_cnt_reset(cnt_context); @@ -5135,10 +5123,10 @@ static int me4000_cnt_ioctl(struct inode *inode_p, struct file *file_p, return 0; } -static int me4000_cnt_config(me4000_cnt_config_t * arg, - me4000_cnt_context_t * cnt_context) +static int me4000_cnt_config(struct me4000_cnt_config *arg, + struct me4000_cnt_context *cnt_context) { - me4000_cnt_config_t cmd; + struct me4000_cnt_config cmd; u8 counter; u8 mode; int err; @@ -5146,7 +5134,7 @@ static int me4000_cnt_config(me4000_cnt_config_t * arg, CALL_PDEBUG("me4000_cnt_config() is executed\n"); /* Copy data from user */ - err = copy_from_user(&cmd, arg, sizeof(me4000_cnt_config_t)); + err = copy_from_user(&cmd, arg, sizeof(struct me4000_cnt_config)); if (err) { printk(KERN_ERR "ME4000:me4000_cnt_config():Can't copy from user space\n"); @@ -5204,17 +5192,17 @@ static int me4000_cnt_config(me4000_cnt_config_t * arg, return 0; } -static int me4000_cnt_read(me4000_cnt_t * arg, - me4000_cnt_context_t * cnt_context) +static int me4000_cnt_read(struct me4000_cnt *arg, + struct me4000_cnt_context *cnt_context) { - me4000_cnt_t cmd; + struct me4000_cnt cmd; u8 tmp; int err; CALL_PDEBUG("me4000_cnt_read() is executed\n"); /* Copy data from user */ - err = copy_from_user(&cmd, arg, sizeof(me4000_cnt_t)); + err = copy_from_user(&cmd, arg, sizeof(struct me4000_cnt)); if (err) { printk(KERN_ERR "ME4000:me4000_cnt_read():Can't copy from user space\n"); @@ -5249,7 +5237,7 @@ static int me4000_cnt_read(me4000_cnt_t * arg, } /* Copy result back to user */ - err = copy_to_user(arg, &cmd, sizeof(me4000_cnt_t)); + err = copy_to_user(arg, &cmd, sizeof(struct me4000_cnt)); if (err) { printk(KERN_ERR "ME4000:me4000_cnt_read():Can't copy to user space\n"); @@ -5259,17 +5247,17 @@ static int me4000_cnt_read(me4000_cnt_t * arg, return 0; } -static int me4000_cnt_write(me4000_cnt_t * arg, - me4000_cnt_context_t * cnt_context) +static int me4000_cnt_write(struct me4000_cnt *arg, + struct me4000_cnt_context *cnt_context) { - me4000_cnt_t cmd; + struct me4000_cnt cmd; u8 tmp; int err; CALL_PDEBUG("me4000_cnt_write() is executed\n"); /* Copy data from user */ - err = copy_from_user(&cmd, arg, sizeof(me4000_cnt_t)); + err = copy_from_user(&cmd, arg, sizeof(struct me4000_cnt)); if (err) { printk(KERN_ERR "ME4000:me4000_cnt_write():Can't copy from user space\n"); @@ -5306,7 +5294,7 @@ static int me4000_cnt_write(me4000_cnt_t * arg, return 0; } -static int me4000_cnt_reset(me4000_cnt_context_t * cnt_context) +static int me4000_cnt_reset(struct me4000_cnt_context *cnt_context) { CALL_PDEBUG("me4000_cnt_reset() is executed\n"); @@ -5333,7 +5321,7 @@ static int me4000_cnt_reset(me4000_cnt_context_t * cnt_context) static int me4000_ext_int_ioctl(struct inode *inode_p, struct file *file_p, unsigned int service, unsigned long arg) { - me4000_ext_int_context_t *ext_int_context; + struct me4000_ext_int_context *ext_int_context; CALL_PDEBUG("me4000_ext_int_ioctl() is executed\n"); @@ -5366,7 +5354,7 @@ static int me4000_ext_int_ioctl(struct inode *inode_p, struct file *file_p, return 0; } -static int me4000_ext_int_enable(me4000_ext_int_context_t * ext_int_context) +static int me4000_ext_int_enable(struct me4000_ext_int_context *ext_int_context) { unsigned long tmp; @@ -5379,7 +5367,7 @@ static int me4000_ext_int_enable(me4000_ext_int_context_t * ext_int_context) return 0; } -static int me4000_ext_int_disable(me4000_ext_int_context_t * ext_int_context) +static int me4000_ext_int_disable(struct me4000_ext_int_context *ext_int_context) { unsigned long tmp; @@ -5393,7 +5381,7 @@ static int me4000_ext_int_disable(me4000_ext_int_context_t * ext_int_context) } static int me4000_ext_int_count(unsigned long *arg, - me4000_ext_int_context_t * ext_int_context) + struct me4000_ext_int_context *ext_int_context) { CALL_PDEBUG("me4000_ext_int_count() is executed\n"); @@ -5404,10 +5392,10 @@ static int me4000_ext_int_count(unsigned long *arg, /*------------------------------------ General stuff ------------------------------------*/ -static int me4000_get_user_info(me4000_user_info_t * arg, - me4000_info_t * board_info) +static int me4000_get_user_info(struct me4000_user_info *arg, + struct me4000_info *board_info) { - me4000_user_info_t user_info; + struct me4000_user_info user_info; CALL_PDEBUG("me4000_get_user_info() is executed\n"); @@ -5437,7 +5425,7 @@ static int me4000_get_user_info(me4000_user_info_t * arg, user_info.cnt_count = board_info->board_p->cnt.count; - if (copy_to_user(arg, &user_info, sizeof(me4000_user_info_t))) + if (copy_to_user(arg, &user_info, sizeof(struct me4000_user_info))) return -EFAULT; return 0; @@ -5448,7 +5436,7 @@ static int me4000_get_user_info(me4000_user_info_t * arg, static int me4000_ext_int_fasync(int fd, struct file *file_ptr, int mode) { int result = 0; - me4000_ext_int_context_t *ext_int_context; + struct me4000_ext_int_context *ext_int_context; CALL_PDEBUG("me4000_ext_int_fasync() is executed\n"); @@ -5465,7 +5453,7 @@ static irqreturn_t me4000_ao_isr(int irq, void *dev_id) { u32 tmp; u32 value; - me4000_ao_context_t *ao_context; + struct me4000_ao_context *ao_context; int i; int c = 0; int c1 = 0; @@ -5589,7 +5577,7 @@ static irqreturn_t me4000_ao_isr(int irq, void *dev_id) static irqreturn_t me4000_ai_isr(int irq, void *dev_id) { u32 tmp; - me4000_ai_context_t *ai_context; + struct me4000_ai_context *ai_context; int i; int c = 0; int c1 = 0; @@ -5933,7 +5921,7 @@ static irqreturn_t me4000_ai_isr(int irq, void *dev_id) static irqreturn_t me4000_ext_int_isr(int irq, void *dev_id) { - me4000_ext_int_context_t *ext_int_context; + struct me4000_ext_int_context *ext_int_context; unsigned long tmp; ISR_PDEBUG("me4000_ext_int_isr() is executed\n"); @@ -5969,10 +5957,10 @@ static irqreturn_t me4000_ext_int_isr(int irq, void *dev_id) return IRQ_HANDLED; } -void __exit me4000_module_exit(void) +static void __exit me4000_module_exit(void) { struct list_head *board_p; - me4000_info_t *board_info; + struct me4000_info *board_info; CALL_PDEBUG("cleanup_module() is executed\n"); @@ -5993,7 +5981,7 @@ void __exit me4000_module_exit(void) /* Reset the boards */ for (board_p = me4000_board_info_list.next; board_p != &me4000_board_info_list; board_p = board_p->next) { - board_info = list_entry(board_p, me4000_info_t, list); + board_info = list_entry(board_p, struct me4000_info, list); me4000_reset_board(board_info); } @@ -6007,7 +5995,7 @@ static int me4000_read_procmem(char *buf, char **start, off_t offset, int count, { int len = 0; int limit = count - 1000; - me4000_info_t *board_info; + struct me4000_info *board_info; struct list_head *ptr; len += sprintf(buf + len, "\nME4000 DRIVER VERSION %X.%X.%X\n\n", @@ -6019,7 +6007,7 @@ static int me4000_read_procmem(char *buf, char **start, off_t offset, int count, for (ptr = me4000_board_info_list.next; (ptr != &me4000_board_info_list) && (len < limit); ptr = ptr->next) { - board_info = list_entry(ptr, me4000_info_t, list); + board_info = list_entry(ptr, struct me4000_info, list); len += sprintf(buf + len, "Board number %d:\n", @@ -6029,14 +6017,14 @@ static int me4000_read_procmem(char *buf, char **start, off_t offset, int count, sprintf(buf + len, "PLX base register = 0x%lX\n", board_info->plx_regbase); len += - sprintf(buf + len, "PLX base register size = 0x%lX\n", - board_info->plx_regbase_size); + sprintf(buf + len, "PLX base register size = 0x%X\n", + (unsigned int)board_info->plx_regbase_size); len += - sprintf(buf + len, "ME4000 base register = 0x%lX\n", - board_info->me4000_regbase); + sprintf(buf + len, "ME4000 base register = 0x%X\n", + (unsigned int)board_info->me4000_regbase); len += - sprintf(buf + len, "ME4000 base register size = 0x%lX\n", - board_info->me4000_regbase_size); + sprintf(buf + len, "ME4000 base register size = 0x%X\n", + (unsigned int)board_info->me4000_regbase_size); len += sprintf(buf + len, "Serial number = 0x%X\n", board_info->serial_no); diff --git a/drivers/staging/me4000/me4000.h b/drivers/staging/me4000/me4000.h index c35e4b9793a0..81c6f4d5e25c 100644 --- a/drivers/staging/me4000/me4000.h +++ b/drivers/staging/me4000/me4000.h @@ -329,46 +329,46 @@ Circular buffer used for analog input/output reads/writes. ===========================================================================*/ -typedef struct me4000_circ_buf { +struct me4000_circ_buf { s16 *buf; int volatile head; int volatile tail; -} me4000_circ_buf_t; +}; /*============================================================================= Information about the hardware capabilities ===========================================================================*/ -typedef struct me4000_ao_info { +struct me4000_ao_info { int count; int fifo_count; -} me4000_ao_info_t; +}; -typedef struct me4000_ai_info { +struct me4000_ai_info { int count; int sh_count; int diff_count; int ex_trig_analog; -} me4000_ai_info_t; +}; -typedef struct me4000_dio_info { +struct me4000_dio_info { int count; -} me4000_dio_info_t; +}; -typedef struct me4000_cnt_info { +struct me4000_cnt_info { int count; -} me4000_cnt_info_t; +}; -typedef struct me4000_board { +struct me4000_board { u16 vendor_id; u16 device_id; - me4000_ao_info_t ao; - me4000_ai_info_t ai; - me4000_dio_info_t dio; - me4000_cnt_info_t cnt; -} me4000_board_t; + struct me4000_ao_info ao; + struct me4000_ai_info ai; + struct me4000_dio_info dio; + struct me4000_cnt_info cnt; +}; -static me4000_board_t me4000_boards[] = { +static struct me4000_board me4000_boards[] = { {PCI_VENDOR_ID_MEILHAUS, 0x4610, {0, 0}, {16, 0, 0, 0}, {4}, {3}}, {PCI_VENDOR_ID_MEILHAUS, 0x4650, {0, 0}, {16, 0, 0, 0}, {4}, {0}}, @@ -391,8 +391,6 @@ static me4000_board_t me4000_boards[] = { {0}, }; -#define ME4000_BOARD_VERSIONS (sizeof(me4000_boards) / sizeof(me4000_board_t) - 1) - /*============================================================================= PCI device table. This is used by modprobe to translate PCI IDs to drivers. @@ -427,19 +425,19 @@ MODULE_DEVICE_TABLE(pci, me4000_pci_table); Global board and subdevice information structures ===========================================================================*/ -typedef struct me4000_info { +struct me4000_info { struct list_head list; // List of all detected boards int board_count; // Index of the board after detection unsigned long plx_regbase; // PLX configuration space base address - unsigned long me4000_regbase; // Base address of the ME4000 - unsigned long timer_regbase; // Base address of the timer circuit - unsigned long program_regbase; // Base address to set the program pin for the xilinx + resource_size_t me4000_regbase; // Base address of the ME4000 + resource_size_t timer_regbase; // Base address of the timer circuit + resource_size_t program_regbase; // Base address to set the program pin for the xilinx unsigned long plx_regbase_size; // PLX register set space - unsigned long me4000_regbase_size; // ME4000 register set space - unsigned long timer_regbase_size; // Timer circuit register set space - unsigned long program_regbase_size; // Size of program base address of the ME4000 + resource_size_t me4000_regbase_size; // ME4000 register set space + resource_size_t timer_regbase_size; // Timer circuit register set space + resource_size_t program_regbase_size; // Size of program base address of the ME4000 unsigned int serial_no; // Serial number of the board unsigned char hw_revision; // Hardware revision of the board @@ -451,7 +449,7 @@ typedef struct me4000_info { int pci_func_no; // PCI function number struct pci_dev *pci_dev_p; // General PCI information - me4000_board_t *board_p; // Holds the board capabilities + struct me4000_board *board_p; // Holds the board capabilities unsigned int irq; // IRQ assigned from the PCI BIOS unsigned int irq_count; // Count of external interrupts @@ -464,18 +462,18 @@ typedef struct me4000_info { struct me4000_dio_context *dio_context; // Digital I/O specific context struct me4000_cnt_context *cnt_context; // Counter specific context struct me4000_ext_int_context *ext_int_context; // External interrupt specific context -} me4000_info_t; +}; -typedef struct me4000_ao_context { +struct me4000_ao_context { struct list_head list; // linked list of me4000_ao_context_t int index; // Index in the list int mode; // Indicates mode (0 = single, 1 = wraparound, 2 = continous) int dac_in_use; // Indicates if already opend spinlock_t use_lock; // Guards in_use spinlock_t int_lock; // Used when locking out interrupts - me4000_circ_buf_t circ_buf; // Circular buffer + struct me4000_circ_buf circ_buf; // Circular buffer wait_queue_head_t wait_queue; // Wait queue to sleep while blocking write - me4000_info_t *board_info; + struct me4000_info *board_info; unsigned int irq; // The irq associated with this ADC int volatile pipe_flag; // Indicates broken pipe set from me4000_ao_isr() unsigned long ctrl_reg; @@ -486,9 +484,9 @@ typedef struct me4000_ao_context { unsigned long irq_status_reg; unsigned long preload_reg; struct fasync_struct *fasync_p; // Queue for asynchronous notification -} me4000_ao_context_t; +}; -typedef struct me4000_ai_context { +struct me4000_ai_context { struct list_head list; // linked list of me4000_ai_info_t int mode; // Indicates mode int in_use; // Indicates if already opend @@ -496,9 +494,9 @@ typedef struct me4000_ai_context { spinlock_t int_lock; // Used when locking out interrupts int number; // Number of the DAC unsigned int irq; // The irq associated with this ADC - me4000_circ_buf_t circ_buf; // Circular buffer + struct me4000_circ_buf circ_buf; // Circular buffer wait_queue_head_t wait_queue; // Wait queue to sleep while blocking read - me4000_info_t *board_info; + struct me4000_info *board_info; struct fasync_struct *fasync_p; // Queue for asynchronous notification @@ -523,48 +521,48 @@ typedef struct me4000_ai_context { unsigned long channel_list_count; unsigned long sample_counter; int sample_counter_reload; -} me4000_ai_context_t; +}; -typedef struct me4000_dio_context { +struct me4000_dio_context { struct list_head list; // linked list of me4000_dio_context_t int in_use; // Indicates if already opend spinlock_t use_lock; // Guards in_use int number; int dio_count; - me4000_info_t *board_info; + struct me4000_info *board_info; unsigned long dir_reg; unsigned long ctrl_reg; unsigned long port_0_reg; unsigned long port_1_reg; unsigned long port_2_reg; unsigned long port_3_reg; -} me4000_dio_context_t; +}; -typedef struct me4000_cnt_context { +struct me4000_cnt_context { struct list_head list; // linked list of me4000_dio_context_t int in_use; // Indicates if already opend spinlock_t use_lock; // Guards in_use int number; int cnt_count; - me4000_info_t *board_info; + struct me4000_info *board_info; unsigned long ctrl_reg; unsigned long counter_0_reg; unsigned long counter_1_reg; unsigned long counter_2_reg; -} me4000_cnt_context_t; +}; -typedef struct me4000_ext_int_context { +struct me4000_ext_int_context { struct list_head list; // linked list of me4000_dio_context_t int in_use; // Indicates if already opend spinlock_t use_lock; // Guards in_use int number; - me4000_info_t *board_info; + struct me4000_info *board_info; unsigned int irq; unsigned long int_count; struct fasync_struct *fasync_ptr; unsigned long ctrl_reg; unsigned long irq_status_reg; -} me4000_ext_int_context_t; +}; #endif @@ -745,12 +743,12 @@ typedef struct me4000_ext_int_context { General type definitions ----------------------------------------------------------------------------*/ -typedef struct me4000_user_info { +struct me4000_user_info { int board_count; // Index of the board after detection unsigned long plx_regbase; // PLX configuration space base address - unsigned long me4000_regbase; // Base address of the ME4000 + resource_size_t me4000_regbase; // Base address of the ME4000 unsigned long plx_regbase_size; // PLX register set space - unsigned long me4000_regbase_size; // ME4000 register set space + resource_size_t me4000_regbase_size; // ME4000 register set space unsigned long serial_no; // Serial number of the board unsigned char hw_revision; // Hardware revision of the board unsigned short vendor_id; // Meilhaus vendor id (0x1402) @@ -773,62 +771,62 @@ typedef struct me4000_user_info { int dio_count; // Count of digital I/O ports int cnt_count; // Count of counters -} me4000_user_info_t; +}; /*----------------------------------------------------------------------------- Type definitions for analog output ----------------------------------------------------------------------------*/ -typedef struct me4000_ao_channel_list { +struct me4000_ao_channel_list { unsigned long count; unsigned long *list; -} me4000_ao_channel_list_t; +}; /*----------------------------------------------------------------------------- Type definitions for analog input ----------------------------------------------------------------------------*/ -typedef struct me4000_ai_channel_list { +struct me4000_ai_channel_list { unsigned long count; unsigned long *list; -} me4000_ai_channel_list_t; +}; -typedef struct me4000_ai_timer { +struct me4000_ai_timer { unsigned long pre_chan; unsigned long chan; unsigned long scan_low; unsigned long scan_high; -} me4000_ai_timer_t; +}; -typedef struct me4000_ai_config { - me4000_ai_timer_t timer; - me4000_ai_channel_list_t channel_list; +struct me4000_ai_config { + struct me4000_ai_timer timer; + struct me4000_ai_channel_list channel_list; int sh; -} me4000_ai_config_t; +}; -typedef struct me4000_ai_single { +struct me4000_ai_single { int channel; int range; int mode; short value; unsigned long timeout; -} me4000_ai_single_t; +}; -typedef struct me4000_ai_trigger { +struct me4000_ai_trigger { int mode; int edge; -} me4000_ai_trigger_t; +}; -typedef struct me4000_ai_sc { +struct me4000_ai_sc { unsigned long value; int reload; -} me4000_ai_sc_t; +}; /*----------------------------------------------------------------------------- Type definitions for eeprom ----------------------------------------------------------------------------*/ -typedef struct me4000_eeprom { +struct me4000_eeprom { unsigned long date; short uni_10_offset; short uni_10_fullscale; @@ -842,45 +840,45 @@ typedef struct me4000_eeprom { short diff_10_fullscale; short diff_2_5_offset; short diff_2_5_fullscale; -} me4000_eeprom_t; +}; /*----------------------------------------------------------------------------- Type definitions for digital I/O ----------------------------------------------------------------------------*/ -typedef struct me4000_dio_config { +struct me4000_dio_config { int port; int mode; int function; -} me4000_dio_config_t; +}; -typedef struct me4000_dio_byte { +struct me4000_dio_byte { int port; unsigned char byte; -} me4000_dio_byte_t; +}; /*----------------------------------------------------------------------------- Type definitions for counters ----------------------------------------------------------------------------*/ -typedef struct me4000_cnt { +struct me4000_cnt { int counter; unsigned short value; -} me4000_cnt_t; +}; -typedef struct me4000_cnt_config { +struct me4000_cnt_config { int counter; int mode; -} me4000_cnt_config_t; +}; /*----------------------------------------------------------------------------- Type definitions for external interrupt ----------------------------------------------------------------------------*/ -typedef struct { +struct me4000_int { int int1_count; int int2_count; -} me4000_int_type; +}; /*----------------------------------------------------------------------------- The ioctls of the board @@ -888,7 +886,8 @@ typedef struct { #define ME4000_IOCTL_MAXNR 50 #define ME4000_MAGIC 'y' -#define ME4000_GET_USER_INFO _IOR (ME4000_MAGIC, 0, me4000_user_info_t) +#define ME4000_GET_USER_INFO _IOR (ME4000_MAGIC, 0, \ + struct me4000_user_info) #define ME4000_AO_START _IOW (ME4000_MAGIC, 1, unsigned long) #define ME4000_AO_STOP _IO (ME4000_MAGIC, 2) @@ -904,25 +903,35 @@ typedef struct { #define ME4000_AO_DISABLE_DO _IO (ME4000_MAGIC, 12) #define ME4000_AO_FSM_STATE _IOR (ME4000_MAGIC, 13, int) -#define ME4000_AI_SINGLE _IOR (ME4000_MAGIC, 14, me4000_ai_single_t) +#define ME4000_AI_SINGLE _IOR (ME4000_MAGIC, 14, \ + struct me4000_ai_single) #define ME4000_AI_START _IOW (ME4000_MAGIC, 15, unsigned long) #define ME4000_AI_STOP _IO (ME4000_MAGIC, 16) #define ME4000_AI_IMMEDIATE_STOP _IO (ME4000_MAGIC, 17) #define ME4000_AI_EX_TRIG_ENABLE _IO (ME4000_MAGIC, 18) #define ME4000_AI_EX_TRIG_DISABLE _IO (ME4000_MAGIC, 19) -#define ME4000_AI_EX_TRIG_SETUP _IOW (ME4000_MAGIC, 20, me4000_ai_trigger_t) -#define ME4000_AI_CONFIG _IOW (ME4000_MAGIC, 21, me4000_ai_config_t) -#define ME4000_AI_SC_SETUP _IOW (ME4000_MAGIC, 22, me4000_ai_sc_t) +#define ME4000_AI_EX_TRIG_SETUP _IOW (ME4000_MAGIC, 20, \ + struct me4000_ai_trigger) +#define ME4000_AI_CONFIG _IOW (ME4000_MAGIC, 21, \ + struct me4000_ai_config) +#define ME4000_AI_SC_SETUP _IOW (ME4000_MAGIC, 22, \ + struct me4000_ai_sc) #define ME4000_AI_FSM_STATE _IOR (ME4000_MAGIC, 23, int) -#define ME4000_DIO_CONFIG _IOW (ME4000_MAGIC, 24, me4000_dio_config_t) -#define ME4000_DIO_GET_BYTE _IOR (ME4000_MAGIC, 25, me4000_dio_byte_t) -#define ME4000_DIO_SET_BYTE _IOW (ME4000_MAGIC, 26, me4000_dio_byte_t) +#define ME4000_DIO_CONFIG _IOW (ME4000_MAGIC, 24, \ + struct me4000_dio_config) +#define ME4000_DIO_GET_BYTE _IOR (ME4000_MAGIC, 25, \ + struct me4000_dio_byte) +#define ME4000_DIO_SET_BYTE _IOW (ME4000_MAGIC, 26, \ + struct me4000_dio_byte) #define ME4000_DIO_RESET _IO (ME4000_MAGIC, 27) -#define ME4000_CNT_READ _IOR (ME4000_MAGIC, 28, me4000_cnt_t) -#define ME4000_CNT_WRITE _IOW (ME4000_MAGIC, 29, me4000_cnt_t) -#define ME4000_CNT_CONFIG _IOW (ME4000_MAGIC, 30, me4000_cnt_config_t) +#define ME4000_CNT_READ _IOR (ME4000_MAGIC, 28, \ + struct me4000_cnt) +#define ME4000_CNT_WRITE _IOW (ME4000_MAGIC, 29, \ + struct me4000_cnt) +#define ME4000_CNT_CONFIG _IOW (ME4000_MAGIC, 30, \ + struct me4000_cnt_config) #define ME4000_CNT_RESET _IO (ME4000_MAGIC, 31) #define ME4000_EXT_INT_DISABLE _IO (ME4000_MAGIC, 32) @@ -934,13 +943,16 @@ typedef struct { #define ME4000_AI_FULLSCALE_ENABLE _IO (ME4000_MAGIC, 37) #define ME4000_AI_FULLSCALE_DISABLE _IO (ME4000_MAGIC, 38) -#define ME4000_AI_EEPROM_READ _IOR (ME4000_MAGIC, 39, me4000_eeprom_t) -#define ME4000_AI_EEPROM_WRITE _IOW (ME4000_MAGIC, 40, me4000_eeprom_t) +#define ME4000_AI_EEPROM_READ _IOR (ME4000_MAGIC, 39, \ + struct me4000_eeprom) +#define ME4000_AI_EEPROM_WRITE _IOW (ME4000_MAGIC, 40, \ + struct me4000_eeprom) #define ME4000_AO_SIMULTANEOUS_EX_TRIG _IO (ME4000_MAGIC, 41) #define ME4000_AO_SIMULTANEOUS_SW _IO (ME4000_MAGIC, 42) #define ME4000_AO_SIMULTANEOUS_DISABLE _IO (ME4000_MAGIC, 43) -#define ME4000_AO_SIMULTANEOUS_UPDATE _IOW (ME4000_MAGIC, 44, me4000_ao_channel_list_t) +#define ME4000_AO_SIMULTANEOUS_UPDATE _IOW (ME4000_MAGIC, 44, \ + struct me4000_ao_channel_list) #define ME4000_AO_SYNCHRONOUS_EX_TRIG _IO (ME4000_MAGIC, 45) #define ME4000_AO_SYNCHRONOUS_SW _IO (ME4000_MAGIC, 46) diff --git a/drivers/staging/pcc-acpi/Kconfig b/drivers/staging/pcc-acpi/Kconfig new file mode 100644 index 000000000000..6720d4086baf --- /dev/null +++ b/drivers/staging/pcc-acpi/Kconfig @@ -0,0 +1,11 @@ +config PCC_ACPI + tristate "Panasonic ACPI Hotkey support" + depends on ACPI + default n + ---help--- + This driver provides support for Panasonic hotkeys through the + ACPI interface. This works for the Panasonic R1 (N variant), + R2, R3, T2, W2, and Y2 laptops. + + To compile this driver as a module, choose M here. The module + will be called pcc-acpi. diff --git a/drivers/staging/pcc-acpi/Makefile b/drivers/staging/pcc-acpi/Makefile new file mode 100644 index 000000000000..f93b29edf61e --- /dev/null +++ b/drivers/staging/pcc-acpi/Makefile @@ -0,0 +1 @@ +obj-$(CONFIG_PCC_ACPI) += pcc-acpi.o diff --git a/drivers/staging/pcc-acpi/TODO b/drivers/staging/pcc-acpi/TODO new file mode 100644 index 000000000000..fab240982286 --- /dev/null +++ b/drivers/staging/pcc-acpi/TODO @@ -0,0 +1,7 @@ +TODO: + - Lindent fixes + - checkpatch.pl fixes + - verify that the acpi interface is correct + - remove /proc dependancy if needed (not sure yet.) + +Please send any patches for this driver to Greg Kroah-Hartman <greg@kroah.com> diff --git a/drivers/staging/pcc-acpi/pcc-acpi.c b/drivers/staging/pcc-acpi/pcc-acpi.c new file mode 100644 index 000000000000..7715c31f2731 --- /dev/null +++ b/drivers/staging/pcc-acpi/pcc-acpi.c @@ -0,0 +1,1111 @@ +/* + * Panasonic HotKey and lcd brightness control Extra driver + * (C) 2004 Hiroshi Miura <miura@da-cha.org> + * (C) 2004 NTT DATA Intellilink Co. http://www.intellilink.co.jp/ + * (C) YOKOTA Hiroshi <yokota (at) netlab. is. tsukuba. ac. jp> + * (C) 2004 David Bronaugh <dbronaugh> + * + * derived from toshiba_acpi.c, Copyright (C) 2002-2004 John Belmonte + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * publicshed by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + *--------------------------------------------------------------------------- + * + * ChangeLog: + * + * Nov.04, 2006 Hiroshi Miura <miura@da-cha.org> + * -v0.9 remove warning about section reference. + * remove acpi_os_free + * add /proc/acpi/pcc/brightness interface to + * allow HAL to access. + * merge dbronaugh's enhancement + * Aug.17, 2004 David Bronaugh (dbronaugh) + * - Added screen brightness setting interface + * Thanks to the FreeBSD crew + * (acpi_panasonic.c authors) + * for the ideas I needed to accomplish it + * + * May.29, 2006 Hiroshi Miura <miura@da-cha.org> + * -v0.8.4 follow to change keyinput structure + * thanks Fabian Yamaguchi <fabs@cs.tu-berlin.de>, + * Jacob Bower <jacob.bower@ic.ac.uk> and + * Hiroshi Yokota for providing solutions. + * + * Oct.02, 2004 Hiroshi Miura <miura@da-cha.org> + * -v0.8.2 merge code of YOKOTA Hiroshi + * <yokota@netlab.is.tsukuba.ac.jp>. + * Add sticky key mode interface. + * Refactoring acpi_pcc_generete_keyinput(). + * + * Sep.15, 2004 Hiroshi Miura <miura@da-cha.org> + * -v0.8 Generate key input event on input subsystem. + * This is based on yet another driver + * written by Ryuta Nakanishi. + * + * Sep.10, 2004 Hiroshi Miura <miura@da-cha.org> + * -v0.7 Change proc interface functions using seq_file + * facility as same as other ACPI drivers. + * + * Aug.28, 2004 Hiroshi Miura <miura@da-cha.org> + * -v0.6.4 Fix a silly error with status checking + * + * Aug.25, 2004 Hiroshi Miura <miura@da-cha.org> + * -v0.6.3 replace read_acpi_int by standard + * function acpi_evaluate_integer + * some clean up and make smart copyright notice. + * fix return value of pcc_acpi_get_key() + * fix checking return value of acpi_bus_register_driver() + * + * Aug.22, 2004 David Bronaugh <dbronaugh@linuxboxen.org> + * -v0.6.2 Add check on ACPI data (num_sifr) + * Coding style cleanups, better error messages/handling + * Fixed an off-by-one error in memory allocation + * + * Aug.21, 2004 David Bronaugh <dbronaugh@linuxboxen.org> + * -v0.6.1 Fix a silly error with status checking + * + * Aug.20, 2004 David Bronaugh <dbronaugh@linuxboxen.org> + * - v0.6 Correct brightness controls to reflect reality + * based on information gleaned by Hiroshi Miura + * and discussions with Hiroshi Miura + * + * Aug.10, 2004 Hiroshi Miura <miura@da-cha.org> + * - v0.5 support LCD brightness control + * based on the disclosed information by MEI. + * + * Jul.25, 2004 Hiroshi Miura <miura@da-cha.org> + * - v0.4 first post version + * add function to retrive SIFR + * + * Jul.24, 2004 Hiroshi Miura <miura@da-cha.org> + * - v0.3 get proper status of hotkey + * + * Jul.22, 2004 Hiroshi Miura <miura@da-cha.org> + * - v0.2 add HotKey handler + * + * Jul.17, 2004 Hiroshi Miura <miura@da-cha.org> + * - v0.1 start from toshiba_acpi driver written by John Belmonte + * + */ + +#define ACPI_PCC_VERSION "0.9+hy" + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/types.h> +#include <linux/ctype.h> +#include <linux/init.h> +#include <linux/input.h> +#include <linux/proc_fs.h> +#include <linux/seq_file.h> +#include <linux/slab.h> +#include <linux/uaccess.h> +#include <acpi/acpi_bus.h> +#include <acpi/acpi_drivers.h> + + +/************************************************************************* + * "seq" file template definition. + */ +/* "seq" initializer */ +#define SEQ_OPEN_FS(_open_func_name_, _show_func_name_) \ +static int _open_func_name_(struct inode *inode, struct file *file) \ +{ \ + return single_open(file, _show_func_name_, PDE(inode)->data); \ +} + +/*------------------------------------------------------------------------- + * "seq" fops template for read-only files. + */ +#define SEQ_FILEOPS_R(_open_func_name_) \ +{ \ + .open = _open_func_name_, \ + .read = seq_read, \ + .llseek = seq_lseek, \ + .release = single_release, \ +} + +/*------------------------------------------------------------------------ + * "seq" fops template for read-write files. + */ +#define SEQ_FILEOPS_RW(_open_func_name_, _write_func_name_) \ +{ \ + .open = _open_func_name_ , \ + .read = seq_read, \ + .write = _write_func_name_, \ + .llseek = seq_lseek, \ + .release = single_release, \ +} + +/* + * "seq" file template definition ended. + *************************************************************************** + */ +#ifndef ACPI_HOTKEY_COMPONENT +#define ACPI_HOTKEY_COMPONENT 0x10000000 +#endif + +#define _COMPONENT ACPI_HOTKEY_COMPONENT +ACPI_MODULE_NAME("pcc_acpi"); + +MODULE_AUTHOR("Hiroshi Miura, Hiroshi Yokota"); +MODULE_DESCRIPTION("ACPI HotKey driver for Panasonic Let's Note laptops"); +MODULE_LICENSE("GPL"); + +#define LOGPREFIX "pcc_acpi: " + +/**************************************************** + * Define ACPI PATHs + ****************************************************/ +/* Lets note hotkeys */ +#define METHOD_HKEY_QUERY "HINF" +#define METHOD_HKEY_SQTY "SQTY" +#define METHOD_HKEY_SINF "SINF" +#define METHOD_HKEY_SSET "SSET" +#define HKEY_NOTIFY 0x80 + +/* for brightness control */ +#define LCD_MAX_BRIGHTNESS 255 +/* This may be magical -- beware */ +#define LCD_BRIGHTNESS_INCREMENT 17 +/* Registers of SINF */ +#define SINF_LCD_BRIGHTNESS 4 + +/******************************************************************* + * + * definitions for /proc/ interface + * + *******************************************************************/ +#define ACPI_PCC_DRIVER_NAME "pcc_acpi" +#define ACPI_PCC_DEVICE_NAME "PCCExtra" +#define ACPI_PCC_CLASS "pcc" +#define PROC_PCC ACPI_PCC_CLASS + +#define ACPI_PCC_INPUT_PHYS "panasonic/hkey0" + +/* This is transitional definition */ +#ifndef KEY_BATT +# define KEY_BATT 227 +#endif + +#define PROC_STR_MAX_LEN 8 + +#define BUS_PCC_HOTKEY BUS_I8042 /*0x1a*/ /* FIXME: BUS_I8042? */ + +/* Fn+F4/F5 confricts with Shift+F1/F2 */ +/* This hack avoids key number confrict */ +#define PCC_KEYINPUT_MODE (0) + +/* LCD_TYPEs: 0 = Normal, 1 = Semi-transparent + ENV_STATEs: Normal temp=0x01, High temp=0x81, N/A=0x00 +*/ +enum SINF_BITS { SINF_NUM_BATTERIES = 0, + SINF_LCD_TYPE, + SINF_AC_MAX_BRIGHT, + SINF_AC_MIN_BRIGHT, + SINF_AC_CUR_BRIGHT, + /* 4 = R1 only handle SINF_AC_CUR_BRIGHT + * as SINF_CUR_BRIGHT and don't know AC state */ + SINF_DC_MAX_BRIGHT, + SINF_DC_MIN_BRIGHT, + SINF_DC_CUR_BRIGHT, + SINF_MUTE, + SINF_RESERVED, + SINF_ENV_STATE, /* 10 */ + SINF_STICKY_KEY = 0x80, +}; + +static struct acpi_device_id pcc_device_ids[] = { + {"MAT0012", 0}, + {"MAT0013", 0}, + {"MAT0018", 0}, + {"MAT0019", 0}, + {"", 0}, +}; +MODULE_DEVICE_TABLE(acpi, pcc_device_ids); + + +static int __devinit acpi_pcc_hotkey_add(struct acpi_device *device); +static int __devexit acpi_pcc_hotkey_remove(struct acpi_device *device, + int type); +static int acpi_pcc_hotkey_resume(struct acpi_device *device); + + +static struct acpi_driver acpi_pcc_driver = { + .name = ACPI_PCC_DRIVER_NAME, + .class = ACPI_PCC_CLASS, + .ids = pcc_device_ids, + .ops = { + .add = acpi_pcc_hotkey_add, + .remove = __devexit_p(acpi_pcc_hotkey_remove), +#ifdef CONFIG_PM + /*.suspend = acpi_pcc_hotkey_suspend,*/ + .resume = acpi_pcc_hotkey_resume, +#endif + }, +}; + +struct acpi_hotkey { + acpi_handle handle; + struct acpi_device *device; + struct proc_dir_entry *proc_dir_entry; + unsigned long num_sifr; + unsigned long status; + struct input_dev *input_dev; + int sticky_mode; +}; + +struct pcc_keyinput { + struct acpi_hotkey *hotkey; + int key_mode; +}; + +/* ************************************************************************* + Hotkey driver core + ************************************************************************* */ +/* ------------------------------------------------------------------------- + method access functions + ------------------------------------------------------------------------- */ +static int acpi_pcc_write_sset(struct acpi_hotkey *hotkey, int func, int val) +{ + union acpi_object in_objs[] = { + { .integer.type = ACPI_TYPE_INTEGER, + .integer.value = func, }, + { .integer.type = ACPI_TYPE_INTEGER, + .integer.value = val, }, + }; + struct acpi_object_list params = { + .count = ARRAY_SIZE(in_objs), + .pointer = in_objs, + }; + acpi_status status; + + ACPI_FUNCTION_TRACE("acpi_pcc_write_sset"); + + status = acpi_evaluate_object(hotkey->handle, METHOD_HKEY_SSET, + ¶ms, NULL); + + return_VALUE(status == AE_OK ? AE_OK : AE_ERROR); +} + +static inline int acpi_pcc_get_sqty(struct acpi_device *device) +{ + unsigned long s; + acpi_status status; + + ACPI_FUNCTION_TRACE("acpi_pcc_get_sqty"); + + status = acpi_evaluate_integer(device->handle, METHOD_HKEY_SQTY, + NULL, &s); + if (ACPI_SUCCESS(status)) { + return_VALUE(s); + } else { + ACPI_DEBUG_PRINT((ACPI_DB_ERROR, + "evaluation error HKEY.SQTY\n")); + return_VALUE(-EINVAL); + } +} + +static int acpi_pcc_retrieve_biosdata(struct acpi_hotkey *hotkey, u32 *sinf) +{ + acpi_status status; + struct acpi_buffer buffer = {ACPI_ALLOCATE_BUFFER, NULL}; + union acpi_object *hkey = NULL; + int i; + + ACPI_FUNCTION_TRACE("acpi_pcc_retrieve_biosdata"); + + status = acpi_evaluate_object(hotkey->handle, METHOD_HKEY_SINF, 0, + &buffer); + if (ACPI_FAILURE(status)) { + ACPI_DEBUG_PRINT((ACPI_DB_ERROR, + "evaluation error HKEY.SINF\n")); + status = AE_ERROR; + return_VALUE(status); + } + + hkey = buffer.pointer; + if (!hkey || (hkey->type != ACPI_TYPE_PACKAGE)) { + ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Invalid HKEY.SINF\n")); + goto free_buffer; + } + + if (hotkey->num_sifr < hkey->package.count) { + ACPI_DEBUG_PRINT((ACPI_DB_ERROR, + "SQTY reports bad SINF length\n")); + status = AE_ERROR; + goto free_buffer; + } + + for (i = 0; i < hkey->package.count; i++) { + union acpi_object *element = &(hkey->package.elements[i]); + if (likely(element->type == ACPI_TYPE_INTEGER)) { + sinf[i] = element->integer.value; + } else { + ACPI_DEBUG_PRINT((ACPI_DB_ERROR, + "Invalid HKEY.SINF data\n")); + status = AE_ERROR; + break; + } + } + sinf[hkey->package.count] = -1; + + free_buffer: + kfree(buffer.pointer); + return_VALUE(status == AE_OK ? AE_OK : AE_ERROR); +} + +static int acpi_pcc_read_sinf_field(struct seq_file *seq, int field) +{ + struct acpi_hotkey *hotkey = (struct acpi_hotkey *) seq->private; + u32 sinf[hotkey->num_sifr + 1]; + + ACPI_FUNCTION_TRACE("acpi_pcc_read_sinf_field"); + + if (ACPI_SUCCESS(acpi_pcc_retrieve_biosdata(hotkey, sinf))) + seq_printf(seq, "%u\n", sinf[field]); + else + ACPI_DEBUG_PRINT((ACPI_DB_ERROR, + "Couldn't retrieve BIOS data\n")); + + return_VALUE(AE_OK); +} + +/* ------------------------------------------------------------------------- + user interface functions + ------------------------------------------------------------------------- */ +/* read methods */ +/* Sinf read methods */ +#define PCC_SINF_READ_F(_name_, FUNC) \ +static int _name_(struct seq_file *seq, void *offset) \ +{ \ + return_VALUE(ACPI_SUCCESS(acpi_pcc_read_sinf_field(seq, \ + (FUNC))) \ + ? 0 : -EINVAL); \ +} + +PCC_SINF_READ_F(acpi_pcc_numbatteries_show, SINF_NUM_BATTERIES); +PCC_SINF_READ_F(acpi_pcc_lcdtype_show, SINF_LCD_TYPE); +PCC_SINF_READ_F(acpi_pcc_ac_brightness_max_show, SINF_AC_MAX_BRIGHT); +PCC_SINF_READ_F(acpi_pcc_ac_brightness_min_show, SINF_AC_MIN_BRIGHT); +PCC_SINF_READ_F(acpi_pcc_ac_brightness_show, SINF_AC_CUR_BRIGHT); +PCC_SINF_READ_F(acpi_pcc_dc_brightness_max_show, SINF_DC_MAX_BRIGHT); +PCC_SINF_READ_F(acpi_pcc_dc_brightness_min_show, SINF_DC_MIN_BRIGHT); +PCC_SINF_READ_F(acpi_pcc_dc_brightness_show, SINF_DC_CUR_BRIGHT); +PCC_SINF_READ_F(acpi_pcc_brightness_show, SINF_AC_CUR_BRIGHT); +PCC_SINF_READ_F(acpi_pcc_mute_show, SINF_MUTE); + +static int acpi_pcc_sticky_key_show(struct seq_file *seq, void *offset) +{ + struct acpi_hotkey *hotkey = seq->private; + + ACPI_FUNCTION_TRACE("acpi_pcc_sticky_key_show"); + + if (!hotkey || !hotkey->device) + return_VALUE(-EINVAL); + + seq_printf(seq, "%d\n", hotkey->sticky_mode); + + return_VALUE(0); +} + +static int acpi_pcc_keyinput_show(struct seq_file *seq, void *offset) +{ + struct acpi_hotkey *hotkey = seq->private; + struct input_dev *hotk_input_dev = hotkey->input_dev; + struct pcc_keyinput *keyinput = input_get_drvdata(hotk_input_dev); + + ACPI_FUNCTION_TRACE("acpi_pcc_keyinput_show"); + + seq_printf(seq, "%d\n", keyinput->key_mode); + + return_VALUE(0); +} + +static int acpi_pcc_version_show(struct seq_file *seq, void *offset) +{ + struct acpi_hotkey *hotkey = seq->private; + + ACPI_FUNCTION_TRACE("acpi_pcc_version_show"); + + if (!hotkey || !hotkey->device) + return_VALUE(-EINVAL); + + seq_printf(seq, "%s version %s\n", ACPI_PCC_DRIVER_NAME, + ACPI_PCC_VERSION); + seq_printf(seq, "%li functions\n", hotkey->num_sifr); + + return_VALUE(0); +} + +/* write methods */ +static ssize_t acpi_pcc_write_single_flag(struct file *file, + const char __user *buffer, + size_t count, + int sinf_func) +{ + struct seq_file *seq = file->private_data; + struct acpi_hotkey *hotkey = seq->private; + char write_string[PROC_STR_MAX_LEN]; + u32 val; + + ACPI_FUNCTION_TRACE("acpi_pcc_write_single_flag"); + + if (!hotkey || (count > sizeof(write_string) - 1)) + return_VALUE(-EINVAL); + + if (copy_from_user(write_string, buffer, count)) + return_VALUE(-EFAULT); + + write_string[count] = '\0'; + + if ((sscanf(write_string, "%3i", &val) == 1) && + (val == 0 || val == 1)) + acpi_pcc_write_sset(hotkey, sinf_func, val); + + return_VALUE(count); +} + +static unsigned long acpi_pcc_write_brightness(struct file *file, + const char __user *buffer, + size_t count, + int min_index, int max_index, + int cur_index) +{ + struct seq_file *seq = (struct seq_file *)file->private_data; + struct acpi_hotkey *hotkey = (struct acpi_hotkey *)seq->private; + char write_string[PROC_STR_MAX_LEN]; + u32 bright; + u32 sinf[hotkey->num_sifr + 1]; + + ACPI_FUNCTION_TRACE("acpi_pcc_write_brightness"); + + if (!hotkey || (count > sizeof(write_string) - 1)) + return_VALUE(-EINVAL); + + if (copy_from_user(write_string, buffer, count)) + return_VALUE(-EFAULT); + + write_string[count] = '\0'; + + if (ACPI_FAILURE(acpi_pcc_retrieve_biosdata(hotkey, sinf))) { + ACPI_DEBUG_PRINT((ACPI_DB_ERROR, + "Couldn't retrieve BIOS data\n")); + goto end; + } + + if ((sscanf(write_string, "%4i", &bright) == 1) && + (bright >= sinf[min_index]) && + (bright <= sinf[max_index])) + acpi_pcc_write_sset(hotkey, cur_index, bright); + +end: + return_VALUE(count); +} + +static ssize_t acpi_pcc_write_ac_brightness(struct file *file, + const char __user *buffer, + size_t count, loff_t *ppos) +{ + return_VALUE(acpi_pcc_write_brightness(file, buffer, count, + SINF_AC_MIN_BRIGHT, + SINF_AC_MAX_BRIGHT, + SINF_AC_CUR_BRIGHT)); +} + +static ssize_t acpi_pcc_write_dc_brightness(struct file *file, + const char __user *buffer, + size_t count, loff_t *ppos) +{ + return_VALUE(acpi_pcc_write_brightness(file, buffer, count, + SINF_DC_MIN_BRIGHT, + SINF_DC_MAX_BRIGHT, + SINF_DC_CUR_BRIGHT)); +} + +static ssize_t acpi_pcc_write_no_brightness(struct file *file, + const char __user *buffer, + size_t count, loff_t *ppos) +{ + return acpi_pcc_write_brightness(file, buffer, count, + SINF_AC_MIN_BRIGHT, + SINF_AC_MAX_BRIGHT, + SINF_AC_CUR_BRIGHT); +} + +static ssize_t acpi_pcc_write_mute(struct file *file, + const char __user *buffer, + size_t count, loff_t *ppos) +{ + return_VALUE(acpi_pcc_write_single_flag(file, buffer, count, + SINF_MUTE)); +} + +static ssize_t acpi_pcc_write_sticky_key(struct file *file, + const char __user *buffer, + size_t count, loff_t *ppos) +{ + struct seq_file *seq = (struct seq_file *)file->private_data; + struct acpi_hotkey *hotkey = (struct acpi_hotkey *)seq->private; + char write_string[PROC_STR_MAX_LEN]; + int mode; + + ACPI_FUNCTION_TRACE("acpi_pcc_write_sticky_key"); + + if (!hotkey || (count > sizeof(write_string) - 1)) + return_VALUE(-EINVAL); + + if (copy_from_user(write_string, buffer, count)) + return_VALUE(-EFAULT); + + write_string[count] = '\0'; + + if ((sscanf(write_string, "%3i", &mode) == 1) && + (mode == 0 || mode == 1)) { + acpi_pcc_write_sset(hotkey, SINF_STICKY_KEY, mode); + hotkey->sticky_mode = mode; + } + + return_VALUE(count); +} + +static ssize_t acpi_pcc_write_keyinput(struct file *file, + const char __user *buffer, + size_t count, loff_t *ppos) +{ + struct seq_file *seq = (struct seq_file *)file->private_data; + struct acpi_hotkey *hotkey = (struct acpi_hotkey *)seq->private; + struct pcc_keyinput *keyinput; + char write_string[PROC_STR_MAX_LEN]; + int key_mode; + + ACPI_FUNCTION_TRACE("acpi_pcc_write_keyinput"); + + if (!hotkey || (count > (sizeof(write_string) - 1))) + return_VALUE(-EINVAL); + + if (copy_from_user(write_string, buffer, count)) + return_VALUE(-EFAULT); + + write_string[count] = '\0'; + + if ((sscanf(write_string, "%4i", &key_mode) == 1) && + (key_mode == 0 || key_mode == 1)) { + keyinput = input_get_drvdata(hotkey->input_dev); + keyinput->key_mode = key_mode; + } + + return_VALUE(count); +} + +/* ------------------------------------------------------------------------- + hotkey driver + ------------------------------------------------------------------------- */ +static void acpi_pcc_generete_keyinput(struct acpi_hotkey *hotkey) +{ + struct input_dev *hotk_input_dev = hotkey->input_dev; + struct pcc_keyinput *keyinput = input_get_drvdata(hotk_input_dev); + int hinf = hotkey->status; + int key_code, hkey_num; + const int key_map[] = { + /* 0 */ -1, + /* 1 */ KEY_BRIGHTNESSDOWN, + /* 2 */ KEY_BRIGHTNESSUP, + /* 3 */ -1, /* vga/lcd switch event is not occur on + hotkey driver. */ + /* 4 */ KEY_MUTE, + /* 5 */ KEY_VOLUMEDOWN, + /* 6 */ KEY_VOLUMEUP, + /* 7 */ KEY_SLEEP, + /* 8 */ -1, /* Change CPU boost: do nothing */ + /* 9 */ KEY_BATT, + /* 10 */ KEY_SUSPEND, + }; + + ACPI_FUNCTION_TRACE("acpi_pcc_generete_keyinput"); + + if (keyinput->key_mode == 0) + return_VOID; + + hkey_num = hinf & 0xf; + + if ((0 > hkey_num) || + (hkey_num > ARRAY_SIZE(key_map))) { + ACPI_DEBUG_PRINT((ACPI_DB_ERROR, + "hotkey number out of range: %d\n", + hkey_num)); + return_VOID; + } + + key_code = key_map[hkey_num]; + + if (key_code != -1) { + int pushed = (hinf & 0x80) ? TRUE : FALSE; + + input_report_key(hotk_input_dev, key_code, pushed); + input_sync(hotk_input_dev); + } +} + +static int acpi_pcc_hotkey_get_key(struct acpi_hotkey *hotkey) +{ + unsigned long result; + acpi_status status = AE_OK; + + ACPI_FUNCTION_TRACE("acpi_pcc_hotkey_get_key"); + + status = acpi_evaluate_integer(hotkey->handle, METHOD_HKEY_QUERY, + NULL, &result); + if (likely(ACPI_SUCCESS(status))) + hotkey->status = result; + else + ACPI_DEBUG_PRINT((ACPI_DB_ERROR, + "error getting hotkey status\n")); + + return_VALUE(status == AE_OK); +} + +void acpi_pcc_hotkey_notify(acpi_handle handle, u32 event, void *data) +{ + struct acpi_hotkey *hotkey = (struct acpi_hotkey *) data; + + ACPI_FUNCTION_TRACE("acpi_pcc_hotkey_notify"); + + switch (event) { + case HKEY_NOTIFY: + if (acpi_pcc_hotkey_get_key(hotkey)) { + /* generate event like '"pcc HKEY 00000080 00000084"' + * when Fn+F4 pressed */ + acpi_bus_generate_proc_event(hotkey->device, event, + hotkey->status); + } + acpi_pcc_generete_keyinput(hotkey); + break; + default: + /* nothing to do */ + break; + } + return_VOID; +} + +/* ************************************************************************* + FS Interface (/proc) + ************************************************************************* */ +/* oepn proc file fs*/ +SEQ_OPEN_FS(acpi_pcc_dc_brightness_open_fs, acpi_pcc_dc_brightness_show); +SEQ_OPEN_FS(acpi_pcc_numbatteries_open_fs, acpi_pcc_numbatteries_show); +SEQ_OPEN_FS(acpi_pcc_lcdtype_open_fs, acpi_pcc_lcdtype_show); +SEQ_OPEN_FS(acpi_pcc_ac_brightness_max_open_fs, + acpi_pcc_ac_brightness_max_show); +SEQ_OPEN_FS(acpi_pcc_ac_brightness_min_open_fs, + acpi_pcc_ac_brightness_min_show); +SEQ_OPEN_FS(acpi_pcc_ac_brightness_open_fs, acpi_pcc_ac_brightness_show); +SEQ_OPEN_FS(acpi_pcc_dc_brightness_max_open_fs, + acpi_pcc_dc_brightness_max_show); +SEQ_OPEN_FS(acpi_pcc_dc_brightness_min_open_fs, + acpi_pcc_dc_brightness_min_show); +SEQ_OPEN_FS(acpi_pcc_brightness_open_fs, acpi_pcc_brightness_show); +SEQ_OPEN_FS(acpi_pcc_mute_open_fs, acpi_pcc_mute_show); +SEQ_OPEN_FS(acpi_pcc_version_open_fs, acpi_pcc_version_show); +SEQ_OPEN_FS(acpi_pcc_keyinput_open_fs, acpi_pcc_keyinput_show); +SEQ_OPEN_FS(acpi_pcc_sticky_key_open_fs, acpi_pcc_sticky_key_show); + +static struct file_operations acpi_pcc_numbatteries_fops = + SEQ_FILEOPS_R(acpi_pcc_numbatteries_open_fs); +static struct file_operations acpi_pcc_lcdtype_fops = + SEQ_FILEOPS_R(acpi_pcc_lcdtype_open_fs); +static struct file_operations acpi_pcc_mute_fops = + SEQ_FILEOPS_RW(acpi_pcc_mute_open_fs, acpi_pcc_write_mute); +static struct file_operations acpi_pcc_ac_brightness_fops = + SEQ_FILEOPS_RW(acpi_pcc_ac_brightness_open_fs, + acpi_pcc_write_ac_brightness); +static struct file_operations acpi_pcc_ac_brightness_max_fops = + SEQ_FILEOPS_R(acpi_pcc_ac_brightness_max_open_fs); +static struct file_operations acpi_pcc_ac_brightness_min_fops = + SEQ_FILEOPS_R(acpi_pcc_ac_brightness_min_open_fs); +static struct file_operations acpi_pcc_dc_brightness_fops = + SEQ_FILEOPS_RW(acpi_pcc_dc_brightness_open_fs, + acpi_pcc_write_dc_brightness); +static struct file_operations acpi_pcc_dc_brightness_max_fops = + SEQ_FILEOPS_R(acpi_pcc_dc_brightness_max_open_fs); +static struct file_operations acpi_pcc_dc_brightness_min_fops = + SEQ_FILEOPS_R(acpi_pcc_dc_brightness_min_open_fs); +static struct file_operations acpi_pcc_brightness_fops = + SEQ_FILEOPS_RW(acpi_pcc_brightness_open_fs, + acpi_pcc_write_no_brightness); +static struct file_operations acpi_pcc_sticky_key_fops = + SEQ_FILEOPS_RW(acpi_pcc_sticky_key_open_fs, acpi_pcc_write_sticky_key); +static struct file_operations acpi_pcc_keyinput_fops = + SEQ_FILEOPS_RW(acpi_pcc_keyinput_open_fs, acpi_pcc_write_keyinput); +static struct file_operations acpi_pcc_version_fops = + SEQ_FILEOPS_R(acpi_pcc_version_open_fs); + +struct proc_item { + const char *name; + struct file_operations *fops; + mode_t flag; +}; + +/* Note: These functions map *exactly* to the SINF/SSET functions */ +struct proc_item acpi_pcc_proc_items_sifr[] = { + { "num_batteries", &acpi_pcc_numbatteries_fops, S_IRUGO }, + { "lcd_type", &acpi_pcc_lcdtype_fops, S_IRUGO }, + { "ac_brightness_max", &acpi_pcc_ac_brightness_max_fops, S_IRUGO }, + { "ac_brightness_min", &acpi_pcc_ac_brightness_min_fops, S_IRUGO }, + { "ac_brightness", &acpi_pcc_ac_brightness_fops, + S_IFREG | S_IRUGO | S_IWUSR }, + { "dc_brightness_max", &acpi_pcc_dc_brightness_max_fops, S_IRUGO }, + { "dc_brightness_min", &acpi_pcc_dc_brightness_min_fops, S_IRUGO }, + { "dc_brightness", &acpi_pcc_dc_brightness_fops, + S_IFREG | S_IRUGO | S_IWUSR }, + { "brightness", &acpi_pcc_brightness_fops, S_IFREG | S_IRUGO | S_IWUSR}, + { "mute", &acpi_pcc_mute_fops, S_IFREG | S_IRUGO | S_IWUSR }, + { NULL, NULL, 0 }, +}; + +struct proc_item acpi_pcc_proc_items[] = { + { "sticky_key", &acpi_pcc_sticky_key_fops, S_IFREG | S_IRUGO | S_IWUSR}, + { "keyinput", &acpi_pcc_keyinput_fops, S_IFREG | S_IRUGO | S_IWUSR }, + { "version", &acpi_pcc_version_fops, S_IRUGO }, + { NULL, NULL, 0 }, +}; + +static int __devinit acpi_pcc_add_device(struct acpi_device *device, + struct proc_item *proc_items, + int num) +{ + struct acpi_hotkey *hotkey = acpi_driver_data(device); + struct proc_dir_entry *proc; + struct proc_item *item; + int i; + + for (item = proc_items, i = 0; item->name && i < num; ++item, ++i) { + proc = create_proc_entry(item->name, item->flag, + hotkey->proc_dir_entry); + if (likely(proc)) { + proc->proc_fops = item->fops; + proc->data = hotkey; + proc->owner = THIS_MODULE; + } else { + while (i-- > 0) { + item--; + remove_proc_entry(item->name, + hotkey->proc_dir_entry); + } + return_VALUE(-ENODEV); + } + } + return_VALUE(0); +} + +static int __devinit acpi_pcc_proc_init(struct acpi_device *device) +{ + struct proc_dir_entry *acpi_pcc_dir; + struct acpi_hotkey *hotkey = acpi_driver_data(device); + acpi_status status; + + ACPI_FUNCTION_TRACE("acpi_pcc_proc_init"); + + acpi_pcc_dir = proc_mkdir(PROC_PCC, acpi_root_dir); + + if (unlikely(!acpi_pcc_dir)) { + ACPI_DEBUG_PRINT((ACPI_DB_ERROR, + "Couldn't create dir in /proc\n")); + return_VALUE(-ENODEV); + } + + acpi_pcc_dir->owner = THIS_MODULE; + hotkey->proc_dir_entry = acpi_pcc_dir; + + status = acpi_pcc_add_device(device, acpi_pcc_proc_items_sifr, + hotkey->num_sifr); + status |= acpi_pcc_add_device(device, acpi_pcc_proc_items, + ARRAY_SIZE(acpi_pcc_proc_items)); + if (unlikely(status)) { + remove_proc_entry(PROC_PCC, acpi_root_dir); + hotkey->proc_dir_entry = NULL; + return_VALUE(-ENODEV); + } + + return_VALUE(status); +} + +static void __devexit acpi_pcc_remove_device(struct acpi_device *device, + struct proc_item *proc_items, + int num) +{ + struct acpi_hotkey *hotkey = acpi_driver_data(device); + struct proc_item *item; + int i; + + for (item = proc_items, i = 0; + item->name != NULL && i < num; + ++item, ++i) { + remove_proc_entry(item->name, hotkey->proc_dir_entry); + } + + return_VOID; +} + +/* ************************************************************************* + Power Management + ************************************************************************* */ +#ifdef CONFIG_PM +static int acpi_pcc_hotkey_resume(struct acpi_device *device) +{ + struct acpi_hotkey *hotkey = acpi_driver_data(device); + acpi_status status = AE_OK; + + ACPI_FUNCTION_TRACE("acpi_pcc_hotkey_resume"); + + if (device == NULL || hotkey == NULL) + return_VALUE(-EINVAL); + + if (hotkey->num_sifr != 0) { + ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Sticky mode restore: %d\n", + hotkey->sticky_mode)); + + status = acpi_pcc_write_sset(hotkey, SINF_STICKY_KEY, + hotkey->sticky_mode); + } + if (status != AE_OK) + return_VALUE(-EINVAL); + + return_VALUE(0); +} +#endif + +/* ************************************************************************* + Module init/remove + ************************************************************************* */ +/* ------------------------------------------------------------------------- + input + ------------------------------------------------------------------------- */ +static int __devinit acpi_pcc_init_input(struct acpi_hotkey *hotkey) +{ + struct input_dev *hotk_input_dev; + struct pcc_keyinput *pcc_keyinput; + int error; + + ACPI_FUNCTION_TRACE("acpi_pcc_init_input"); + + hotk_input_dev = input_allocate_device(); + if (hotk_input_dev == NULL) { + ACPI_DEBUG_PRINT((ACPI_DB_ERROR, + "Couldn't allocate input device for hotkey")); + goto err_input; + } + + pcc_keyinput = kcalloc(1, sizeof(struct pcc_keyinput), GFP_KERNEL); + + if (pcc_keyinput == NULL) { + ACPI_DEBUG_PRINT((ACPI_DB_ERROR, + "Couldn't allocate mem for private data")); + goto err_pcc; + } + + hotk_input_dev->evbit[0] = BIT(EV_KEY); + + set_bit(KEY_BRIGHTNESSDOWN, hotk_input_dev->keybit); + set_bit(KEY_BRIGHTNESSUP, hotk_input_dev->keybit); + set_bit(KEY_MUTE, hotk_input_dev->keybit); + set_bit(KEY_VOLUMEDOWN, hotk_input_dev->keybit); + set_bit(KEY_VOLUMEUP, hotk_input_dev->keybit); + set_bit(KEY_SLEEP, hotk_input_dev->keybit); + set_bit(KEY_BATT, hotk_input_dev->keybit); + set_bit(KEY_SUSPEND, hotk_input_dev->keybit); + + hotk_input_dev->name = ACPI_PCC_DRIVER_NAME; + hotk_input_dev->phys = ACPI_PCC_INPUT_PHYS; + hotk_input_dev->id.bustype = BUS_PCC_HOTKEY; + hotk_input_dev->id.vendor = 0x0001; + hotk_input_dev->id.product = 0x0001; + hotk_input_dev->id.version = 0x0100; + + pcc_keyinput->key_mode = PCC_KEYINPUT_MODE; + pcc_keyinput->hotkey = hotkey; + + input_set_drvdata(hotk_input_dev, pcc_keyinput); + + hotkey->input_dev = hotk_input_dev; + + error = input_register_device(hotk_input_dev); + + if (error) + goto err_pcc; + + return_VALUE(0); + + err_pcc: + input_unregister_device(hotk_input_dev); + err_input: + return_VALUE(-ENOMEM); +} + +static void __devexit acpi_pcc_remove_input(struct acpi_hotkey *hotkey) +{ + struct input_dev *hotk_input_dev; + struct pcc_keyinput *pcc_keyinput; + + ACPI_FUNCTION_TRACE("acpi_pcc_remove_input"); + + if (hotkey == NULL) { + ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Can't free memory")); + return_VOID; + } + + hotk_input_dev = hotkey->input_dev; + pcc_keyinput = input_get_drvdata(hotk_input_dev); + + input_unregister_device(hotk_input_dev); + + kfree(pcc_keyinput); +} + +/* ------------------------------------------------------------------------- + ACPI + ------------------------------------------------------------------------- */ +static int __devinit acpi_pcc_hotkey_add(struct acpi_device *device) +{ + acpi_status status = AE_OK; + struct acpi_hotkey *hotkey = NULL; + int sifr_status, num_sifr, result; + + ACPI_FUNCTION_TRACE("acpi_pcc_hotkey_add"); + + if (device == NULL) + return_VALUE(-EINVAL); + + sifr_status = acpi_pcc_get_sqty(device); + + if (sifr_status > 255) { + ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "num_sifr too large")); + return_VALUE(-ENODEV); + } + + if (sifr_status < 0) { + ACPI_DEBUG_PRINT((ACPI_DB_INFO, "not support SQTY")); + num_sifr = 0; + } else { + num_sifr = sifr_status; + } + + hotkey = kcalloc(1, sizeof(struct acpi_hotkey), GFP_KERNEL); + if (hotkey == NULL) { + ACPI_DEBUG_PRINT((ACPI_DB_ERROR, + "Couldn't allocate mem for hotkey")); + return_VALUE(-ENOMEM); + } + + hotkey->device = device; + hotkey->handle = device->handle; + hotkey->num_sifr = num_sifr; + acpi_driver_data(device) = hotkey; + strcpy(acpi_device_name(device), ACPI_PCC_DEVICE_NAME); + strcpy(acpi_device_class(device), ACPI_PCC_CLASS); + + status = acpi_install_notify_handler(hotkey->handle, + ACPI_DEVICE_NOTIFY, + acpi_pcc_hotkey_notify, + hotkey); + + if (ACPI_FAILURE(status)) { + ACPI_DEBUG_PRINT((ACPI_DB_ERROR, + "Error installing notify handler\n")); + kfree(hotkey); + return_VALUE(-ENODEV); + } + + result = acpi_pcc_init_input(hotkey); + if (result != 0) { + ACPI_DEBUG_PRINT((ACPI_DB_ERROR, + "Error installing keyinput handler\n")); + kfree(hotkey); + return_VALUE(result); + } + + return_VALUE(acpi_pcc_proc_init(device)); +} + +static int __devexit acpi_pcc_hotkey_remove(struct acpi_device *device, + int type) +{ + acpi_status status = AE_OK; + struct acpi_hotkey *hotkey = acpi_driver_data(device); + + ACPI_FUNCTION_TRACE("acpi_pcc_hotkey_remove"); + + if (!device || !hotkey) + return_VALUE(-EINVAL); + + if (hotkey->proc_dir_entry) { + acpi_pcc_remove_device(device, acpi_pcc_proc_items_sifr, + hotkey->num_sifr); + acpi_pcc_remove_device(device, acpi_pcc_proc_items, + ARRAY_SIZE(acpi_pcc_proc_items)); + remove_proc_entry(PROC_PCC, acpi_root_dir); + } + + status = acpi_remove_notify_handler(hotkey->handle, + ACPI_DEVICE_NOTIFY, acpi_pcc_hotkey_notify); + + if (ACPI_FAILURE(status)) { + ACPI_DEBUG_PRINT((ACPI_DB_ERROR, + "Error removing notify handler\n")); + } + + acpi_pcc_remove_input(hotkey); + kfree(hotkey); + return_VALUE(status == AE_OK); +} + +/* ********************************************************************* + Module entry point + ********************************************************************* */ +static int __init acpi_pcc_init(void) +{ + int result; + + ACPI_FUNCTION_TRACE("acpi_pcc_init"); + + printk(KERN_INFO LOGPREFIX "loading...\n"); + + if (acpi_disabled) { + printk(KERN_INFO LOGPREFIX "ACPI disabled.\n"); + return_VALUE(-ENODEV); + } + + result = acpi_bus_register_driver(&acpi_pcc_driver); + if (result < 0) { + ACPI_DEBUG_PRINT((ACPI_DB_ERROR, + "Error registering hotkey driver\n")); + return_VALUE(-ENODEV); + } + + return_VALUE(result); +} + +static void __exit acpi_pcc_exit(void) +{ + ACPI_FUNCTION_TRACE("acpi_pcc_exit"); + + printk(KERN_INFO LOGPREFIX "unloading...\n"); + + acpi_bus_unregister_driver(&acpi_pcc_driver); + + return_VOID; +} + +module_init(acpi_pcc_init); +module_exit(acpi_pcc_exit); diff --git a/drivers/staging/poch/Kconfig b/drivers/staging/poch/Kconfig new file mode 100644 index 000000000000..b3b33b984a57 --- /dev/null +++ b/drivers/staging/poch/Kconfig @@ -0,0 +1,6 @@ +config POCH + tristate "Redrapids Pocket Change CardBus support" + depends on PCI && UIO + default N + ---help--- + Enable support for Redrapids Pocket Change CardBus devices. diff --git a/drivers/staging/poch/Makefile b/drivers/staging/poch/Makefile new file mode 100644 index 000000000000..d2b96805cb9e --- /dev/null +++ b/drivers/staging/poch/Makefile @@ -0,0 +1 @@ +obj-$(CONFIG_POCH) += poch.o diff --git a/drivers/staging/poch/README b/drivers/staging/poch/README new file mode 100644 index 000000000000..f65e979743ba --- /dev/null +++ b/drivers/staging/poch/README @@ -0,0 +1,7 @@ +TODO: + - fix transmit overflows + - audit userspace interfaces + - get reserved major/minor if needed + +Please send patches to Greg Kroah-Hartman <greg@kroah.com> and +Vijay Kumar <vijaykumar@bravegnu.org> and Jaya Kumar <jayakumar.lkml@gmail.com> diff --git a/drivers/staging/poch/poch.c b/drivers/staging/poch/poch.c new file mode 100644 index 000000000000..0e113f9a1581 --- /dev/null +++ b/drivers/staging/poch/poch.c @@ -0,0 +1,1425 @@ +/* + * User-space DMA and UIO based Redrapids Pocket Change CardBus driver + * + * Copyright 2008 Vijay Kumar <vijaykumar@bravegnu.org> + * + * Licensed under GPL version 2 only. + */ + +#include <linux/device.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/uio_driver.h> +#include <linux/spinlock.h> +#include <linux/cdev.h> +#include <linux/delay.h> +#include <linux/sysfs.h> +#include <linux/poll.h> +#include <linux/idr.h> +#include <linux/interrupt.h> +#include <linux/init.h> +#include <linux/ioctl.h> +#include <linux/io.h> + +#include "poch.h" + +#include <asm/cacheflush.h> + +#ifndef PCI_VENDOR_ID_RRAPIDS +#define PCI_VENDOR_ID_RRAPIDS 0x17D2 +#endif + +#ifndef PCI_DEVICE_ID_RRAPIDS_POCKET_CHANGE +#define PCI_DEVICE_ID_RRAPIDS_POCKET_CHANGE 0x0351 +#endif + +#define POCH_NCHANNELS 2 + +#define MAX_POCH_CARDS 8 +#define MAX_POCH_DEVICES (MAX_POCH_CARDS * POCH_NCHANNELS) + +#define DRV_NAME "poch" +#define PFX DRV_NAME ": " + +/* + * BAR0 Bridge Register Definitions + */ + +#define BRIDGE_REV_REG 0x0 +#define BRIDGE_INT_MASK_REG 0x4 +#define BRIDGE_INT_STAT_REG 0x8 + +#define BRIDGE_INT_ACTIVE (0x1 << 31) +#define BRIDGE_INT_FPGA (0x1 << 2) +#define BRIDGE_INT_TEMP_FAIL (0x1 << 1) +#define BRIDGE_INT_TEMP_WARN (0x1 << 0) + +#define BRIDGE_FPGA_RESET_REG 0xC + +#define BRIDGE_CARD_POWER_REG 0x10 +#define BRIDGE_CARD_POWER_EN (0x1 << 0) +#define BRIDGE_CARD_POWER_PROG_DONE (0x1 << 31) + +#define BRIDGE_JTAG_REG 0x14 +#define BRIDGE_DMA_GO_REG 0x18 +#define BRIDGE_STAT_0_REG 0x1C +#define BRIDGE_STAT_1_REG 0x20 +#define BRIDGE_STAT_2_REG 0x24 +#define BRIDGE_STAT_3_REG 0x28 +#define BRIDGE_TEMP_STAT_REG 0x2C +#define BRIDGE_TEMP_THRESH_REG 0x30 +#define BRIDGE_EEPROM_REVSEL_REG 0x34 +#define BRIDGE_CIS_STRUCT_REG 0x100 +#define BRIDGE_BOARDREV_REG 0x124 + +/* + * BAR1 FPGA Register Definitions + */ + +#define FPGA_IFACE_REV_REG 0x0 +#define FPGA_RX_BLOCK_SIZE_REG 0x8 +#define FPGA_TX_BLOCK_SIZE_REG 0xC +#define FPGA_RX_BLOCK_COUNT_REG 0x10 +#define FPGA_TX_BLOCK_COUNT_REG 0x14 +#define FPGA_RX_CURR_DMA_BLOCK_REG 0x18 +#define FPGA_TX_CURR_DMA_BLOCK_REG 0x1C +#define FPGA_RX_GROUP_COUNT_REG 0x20 +#define FPGA_TX_GROUP_COUNT_REG 0x24 +#define FPGA_RX_CURR_GROUP_REG 0x28 +#define FPGA_TX_CURR_GROUP_REG 0x2C +#define FPGA_RX_CURR_PCI_REG 0x38 +#define FPGA_TX_CURR_PCI_REG 0x3C +#define FPGA_RX_GROUP0_START_REG 0x40 +#define FPGA_TX_GROUP0_START_REG 0xC0 +#define FPGA_DMA_DESC_1_REG 0x140 +#define FPGA_DMA_DESC_2_REG 0x144 +#define FPGA_DMA_DESC_3_REG 0x148 +#define FPGA_DMA_DESC_4_REG 0x14C + +#define FPGA_DMA_INT_STAT_REG 0x150 +#define FPGA_DMA_INT_MASK_REG 0x154 +#define FPGA_DMA_INT_RX (1 << 0) +#define FPGA_DMA_INT_TX (1 << 1) + +#define FPGA_RX_GROUPS_PER_INT_REG 0x158 +#define FPGA_TX_GROUPS_PER_INT_REG 0x15C +#define FPGA_DMA_ADR_PAGE_REG 0x160 +#define FPGA_FPGA_REV_REG 0x200 + +#define FPGA_ADC_CLOCK_CTL_REG 0x204 +#define FPGA_ADC_CLOCK_CTL_OSC_EN (0x1 << 3) +#define FPGA_ADC_CLOCK_LOCAL_CLK (0x1 | FPGA_ADC_CLOCK_CTL_OSC_EN) +#define FPGA_ADC_CLOCK_EXT_SAMP_CLK 0X0 + +#define FPGA_ADC_DAC_EN_REG 0x208 +#define FPGA_ADC_DAC_EN_DAC_OFF (0x1 << 1) +#define FPGA_ADC_DAC_EN_ADC_OFF (0x1 << 0) + +#define FPGA_INT_STAT_REG 0x20C +#define FPGA_INT_MASK_REG 0x210 +#define FPGA_INT_PLL_UNLOCKED (0x1 << 9) +#define FPGA_INT_DMA_CORE (0x1 << 8) +#define FPGA_INT_TX_FF_EMPTY (0x1 << 7) +#define FPGA_INT_RX_FF_EMPTY (0x1 << 6) +#define FPGA_INT_TX_FF_OVRFLW (0x1 << 3) +#define FPGA_INT_RX_FF_OVRFLW (0x1 << 2) +#define FPGA_INT_TX_ACQ_DONE (0x1 << 1) +#define FPGA_INT_RX_ACQ_DONE (0x1) + +#define FPGA_RX_ADC_CTL_REG 0x214 +#define FPGA_RX_ADC_CTL_CONT_CAP (0x0) +#define FPGA_RX_ADC_CTL_SNAP_CAP (0x1) + +#define FPGA_RX_ARM_REG 0x21C + +#define FPGA_DOM_REG 0x224 +#define FPGA_DOM_DCM_RESET (0x1 << 5) +#define FPGA_DOM_SOFT_RESET (0x1 << 4) +#define FPGA_DOM_DUAL_M_SG_DMA (0x0) +#define FPGA_DOM_TARGET_ACCESS (0x1) + +#define FPGA_TX_CTL_REG 0x228 +#define FPGA_TX_CTL_FIFO_FLUSH (0x1 << 9) +#define FPGA_TX_CTL_OUTPUT_ZERO (0x0 << 2) +#define FPGA_TX_CTL_OUTPUT_CARDBUS (0x1 << 2) +#define FPGA_TX_CTL_OUTPUT_ADC (0x2 << 2) +#define FPGA_TX_CTL_OUTPUT_SNAPSHOT (0x3 << 2) +#define FPGA_TX_CTL_LOOPBACK (0x1 << 0) + +#define FPGA_ENDIAN_MODE_REG 0x22C +#define FPGA_RX_FIFO_COUNT_REG 0x28C +#define FPGA_TX_ENABLE_REG 0x298 +#define FPGA_TX_TRIGGER_REG 0x29C +#define FPGA_TX_DATAMEM_COUNT_REG 0x2A8 +#define FPGA_CAP_FIFO_REG 0x300 +#define FPGA_TX_SNAPSHOT_REG 0x8000 + +/* + * Channel Index Definitions + */ + +enum { + CHNO_RX_CHANNEL, + CHNO_TX_CHANNEL, +}; + +struct poch_dev; + +enum channel_dir { + CHANNEL_DIR_RX, + CHANNEL_DIR_TX, +}; + +struct poch_group_info { + struct page *pg; + dma_addr_t dma_addr; + unsigned long user_offset; +}; + +struct channel_info { + unsigned int chno; + + atomic_t sys_block_size; + atomic_t sys_group_size; + atomic_t sys_group_count; + + enum channel_dir dir; + + unsigned long block_size; + unsigned long group_size; + unsigned long group_count; + + /* Contains the DMA address and VM offset of each group. */ + struct poch_group_info *groups; + + /* Contains the header and circular buffer exported to userspace. */ + spinlock_t group_offsets_lock; + struct poch_cbuf_header *header; + struct page *header_pg; + unsigned long header_size; + + /* Last group indicated as 'complete' to user space. */ + unsigned int transfer; + + wait_queue_head_t wq; + + union { + unsigned int data_available; + unsigned int space_available; + }; + + void __iomem *bridge_iomem; + void __iomem *fpga_iomem; + spinlock_t *iomem_lock; + + atomic_t free; + atomic_t inited; + + /* Error counters */ + struct poch_counters counters; + spinlock_t counters_lock; + + struct device *dev; +}; + +struct poch_dev { + struct uio_info uio; + struct pci_dev *pci_dev; + unsigned int nchannels; + struct channel_info channels[POCH_NCHANNELS]; + struct cdev cdev; + + /* Counts the no. of channels that have been opened. On first + * open, the card is powered on. On last channel close, the + * card is powered off. + */ + atomic_t usage; + + void __iomem *bridge_iomem; + void __iomem *fpga_iomem; + spinlock_t iomem_lock; + + struct device *dev; +}; + +static dev_t poch_first_dev; +static struct class *poch_cls; +static DEFINE_IDR(poch_ids); + +static ssize_t store_block_size(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct channel_info *channel = dev_get_drvdata(dev); + unsigned long block_size; + + sscanf(buf, "%lu", &block_size); + atomic_set(&channel->sys_block_size, block_size); + + return count; +} +static DEVICE_ATTR(block_size, S_IWUSR|S_IWGRP, NULL, store_block_size); + +static ssize_t store_group_size(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct channel_info *channel = dev_get_drvdata(dev); + unsigned long group_size; + + sscanf(buf, "%lu", &group_size); + atomic_set(&channel->sys_group_size, group_size); + + return count; +} +static DEVICE_ATTR(group_size, S_IWUSR|S_IWGRP, NULL, store_group_size); + +static ssize_t store_group_count(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct channel_info *channel = dev_get_drvdata(dev); + unsigned long group_count; + + sscanf(buf, "%lu", &group_count); + atomic_set(&channel->sys_group_count, group_count); + + return count; +} +static DEVICE_ATTR(group_count, S_IWUSR|S_IWGRP, NULL, store_group_count); + +static ssize_t show_direction(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct channel_info *channel = dev_get_drvdata(dev); + int len; + + len = sprintf(buf, "%s\n", (channel->dir ? "tx" : "rx")); + return len; +} +static DEVICE_ATTR(dir, S_IRUSR|S_IRGRP, show_direction, NULL); + +static ssize_t show_mmap_size(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct channel_info *channel = dev_get_drvdata(dev); + int len; + unsigned long mmap_size; + unsigned long group_pages; + unsigned long header_pages; + unsigned long total_group_pages; + + /* FIXME: We do not have to add 1, if group_size a multiple of + PAGE_SIZE. */ + group_pages = (channel->group_size / PAGE_SIZE) + 1; + header_pages = (channel->header_size / PAGE_SIZE) + 1; + total_group_pages = group_pages * channel->group_count; + + mmap_size = (header_pages + total_group_pages) * PAGE_SIZE; + len = sprintf(buf, "%lu\n", mmap_size); + return len; +} +static DEVICE_ATTR(mmap_size, S_IRUSR|S_IRGRP, show_mmap_size, NULL); + +static struct device_attribute *poch_class_attrs[] = { + &dev_attr_block_size, + &dev_attr_group_size, + &dev_attr_group_count, + &dev_attr_dir, + &dev_attr_mmap_size, +}; + +static void poch_channel_free_groups(struct channel_info *channel) +{ + unsigned long i; + + for (i = 0; i < channel->group_count; i++) { + struct poch_group_info *group; + unsigned int order; + + group = &channel->groups[i]; + order = get_order(channel->group_size); + if (group->pg) + __free_pages(group->pg, order); + } +} + +static int poch_channel_alloc_groups(struct channel_info *channel) +{ + unsigned long i; + unsigned long group_pages; + unsigned long header_pages; + + group_pages = (channel->group_size / PAGE_SIZE) + 1; + header_pages = (channel->header_size / PAGE_SIZE) + 1; + + for (i = 0; i < channel->group_count; i++) { + struct poch_group_info *group; + unsigned int order; + gfp_t gfp_mask; + + group = &channel->groups[i]; + order = get_order(channel->group_size); + + /* + * __GFP_COMP is required here since we are going to + * perform non-linear mapping to userspace. For more + * information read the vm_insert_page() function + * comments. + */ + + gfp_mask = GFP_KERNEL | GFP_DMA32 | __GFP_ZERO; + group->pg = alloc_pages(gfp_mask, order); + if (!group->pg) { + poch_channel_free_groups(channel); + return -ENOMEM; + } + + /* FIXME: This is the physical address not the bus + * address! This won't work in architectures that + * have an IOMMU. Can we use pci_map_single() for + * this? + */ + group->dma_addr = page_to_pfn(group->pg) * PAGE_SIZE; + group->user_offset = + (header_pages + (i * group_pages)) * PAGE_SIZE; + + printk(KERN_INFO PFX "%ld: user_offset: 0x%lx dma: 0x%x\n", i, + group->user_offset, group->dma_addr); + } + + return 0; +} + +static void channel_latch_attr(struct channel_info *channel) +{ + channel->group_count = atomic_read(&channel->sys_group_count); + channel->group_size = atomic_read(&channel->sys_group_size); + channel->block_size = atomic_read(&channel->sys_block_size); +} + +/* + * Configure DMA group registers + */ +static void channel_dma_init(struct channel_info *channel) +{ + void __iomem *fpga = channel->fpga_iomem; + u32 group_regs_base; + u32 group_reg; + unsigned int page; + unsigned int group_in_page; + unsigned long i; + u32 block_size_reg; + u32 block_count_reg; + u32 group_count_reg; + u32 groups_per_int_reg; + u32 curr_pci_reg; + + if (channel->chno == CHNO_RX_CHANNEL) { + group_regs_base = FPGA_RX_GROUP0_START_REG; + block_size_reg = FPGA_RX_BLOCK_SIZE_REG; + block_count_reg = FPGA_RX_BLOCK_COUNT_REG; + group_count_reg = FPGA_RX_GROUP_COUNT_REG; + groups_per_int_reg = FPGA_RX_GROUPS_PER_INT_REG; + curr_pci_reg = FPGA_RX_CURR_PCI_REG; + } else { + group_regs_base = FPGA_TX_GROUP0_START_REG; + block_size_reg = FPGA_TX_BLOCK_SIZE_REG; + block_count_reg = FPGA_TX_BLOCK_COUNT_REG; + group_count_reg = FPGA_TX_GROUP_COUNT_REG; + groups_per_int_reg = FPGA_TX_GROUPS_PER_INT_REG; + curr_pci_reg = FPGA_TX_CURR_PCI_REG; + } + + printk(KERN_WARNING "block_size, group_size, group_count\n"); + iowrite32(channel->block_size, fpga + block_size_reg); + iowrite32(channel->group_size / channel->block_size, + fpga + block_count_reg); + iowrite32(channel->group_count, fpga + group_count_reg); + /* FIXME: Hardcoded groups per int. Get it from sysfs? */ + iowrite32(1, fpga + groups_per_int_reg); + + /* Unlock PCI address? Not defined in the data sheet, but used + * in the reference code by Redrapids. + */ + iowrite32(0x1, fpga + curr_pci_reg); + + /* The DMA address page register is shared between the RX and + * TX channels, so acquire lock. + */ + spin_lock(channel->iomem_lock); + for (i = 0; i < channel->group_count; i++) { + page = i / 32; + group_in_page = i % 32; + + group_reg = group_regs_base + (group_in_page * 4); + + iowrite32(page, fpga + FPGA_DMA_ADR_PAGE_REG); + iowrite32(channel->groups[i].dma_addr, fpga + group_reg); + } + for (i = 0; i < channel->group_count; i++) { + page = i / 32; + group_in_page = i % 32; + + group_reg = group_regs_base + (group_in_page * 4); + + iowrite32(page, fpga + FPGA_DMA_ADR_PAGE_REG); + printk(KERN_INFO PFX "%ld: read dma_addr: 0x%x\n", i, + ioread32(fpga + group_reg)); + } + spin_unlock(channel->iomem_lock); + +} + +static int poch_channel_alloc_header(struct channel_info *channel) +{ + struct poch_cbuf_header *header = channel->header; + unsigned long group_offset_size; + unsigned long tot_group_offsets_size; + + /* Allocate memory to hold header exported userspace */ + group_offset_size = sizeof(header->group_offsets[0]); + tot_group_offsets_size = group_offset_size * channel->group_count; + channel->header_size = sizeof(*header) + tot_group_offsets_size; + channel->header_pg = alloc_pages(GFP_KERNEL | __GFP_ZERO, + get_order(channel->header_size)); + if (!channel->header_pg) + return -ENOMEM; + + channel->header = page_address(channel->header_pg); + + return 0; +} + +static void poch_channel_free_header(struct channel_info *channel) +{ + unsigned int order; + + order = get_order(channel->header_size); + __free_pages(channel->header_pg, order); +} + +static void poch_channel_init_header(struct channel_info *channel) +{ + int i; + struct poch_group_info *groups; + s32 *group_offsets; + + channel->header->group_size_bytes = channel->group_size; + channel->header->group_count = channel->group_count; + + spin_lock_init(&channel->group_offsets_lock); + + group_offsets = channel->header->group_offsets; + groups = channel->groups; + + for (i = 0; i < channel->group_count; i++) { + if (channel->dir == CHANNEL_DIR_RX) + group_offsets[i] = -1; + else + group_offsets[i] = groups[i].user_offset; + } +} + +static void __poch_channel_clear_counters(struct channel_info *channel) +{ + channel->counters.pll_unlock = 0; + channel->counters.fifo_empty = 0; + channel->counters.fifo_overflow = 0; +} + +static int poch_channel_init(struct channel_info *channel, + struct poch_dev *poch_dev) +{ + struct pci_dev *pdev = poch_dev->pci_dev; + struct device *dev = &pdev->dev; + unsigned long alloc_size; + int ret; + + printk(KERN_WARNING "channel_latch_attr\n"); + + channel_latch_attr(channel); + + channel->transfer = 0; + + /* Allocate memory to hold group information. */ + alloc_size = channel->group_count * sizeof(struct poch_group_info); + channel->groups = kzalloc(alloc_size, GFP_KERNEL); + if (!channel->groups) { + dev_err(dev, "error allocating memory for group info\n"); + ret = -ENOMEM; + goto out; + } + + printk(KERN_WARNING "poch_channel_alloc_groups\n"); + + ret = poch_channel_alloc_groups(channel); + if (ret) { + dev_err(dev, "error allocating groups of order %d\n", + get_order(channel->group_size)); + goto out_free_group_info; + } + + ret = poch_channel_alloc_header(channel); + if (ret) { + dev_err(dev, "error allocating user space header\n"); + goto out_free_groups; + } + + channel->fpga_iomem = poch_dev->fpga_iomem; + channel->bridge_iomem = poch_dev->bridge_iomem; + channel->iomem_lock = &poch_dev->iomem_lock; + spin_lock_init(&channel->counters_lock); + + __poch_channel_clear_counters(channel); + + printk(KERN_WARNING "poch_channel_init_header\n"); + + poch_channel_init_header(channel); + + return 0; + + out_free_groups: + poch_channel_free_groups(channel); + out_free_group_info: + kfree(channel->groups); + out: + return ret; +} + +static int poch_wait_fpga_prog(void __iomem *bridge) +{ + unsigned long total_wait; + const unsigned long wait_period = 100; + /* FIXME: Get the actual timeout */ + const unsigned long prog_timeo = 10000; /* 10 Seconds */ + u32 card_power; + + printk(KERN_WARNING "poch_wait_fpg_prog\n"); + + printk(KERN_INFO PFX "programming fpga ...\n"); + total_wait = 0; + while (1) { + msleep(wait_period); + total_wait += wait_period; + + card_power = ioread32(bridge + BRIDGE_CARD_POWER_REG); + if (card_power & BRIDGE_CARD_POWER_PROG_DONE) { + printk(KERN_INFO PFX "programming done\n"); + return 0; + } + if (total_wait > prog_timeo) { + printk(KERN_ERR PFX + "timed out while programming FPGA\n"); + return -EIO; + } + } +} + +static void poch_card_power_off(struct poch_dev *poch_dev) +{ + void __iomem *bridge = poch_dev->bridge_iomem; + u32 card_power; + + iowrite32(0, bridge + BRIDGE_INT_MASK_REG); + iowrite32(0, bridge + BRIDGE_DMA_GO_REG); + + card_power = ioread32(bridge + BRIDGE_CARD_POWER_REG); + iowrite32(card_power & ~BRIDGE_CARD_POWER_EN, + bridge + BRIDGE_CARD_POWER_REG); +} + +enum clk_src { + CLK_SRC_ON_BOARD, + CLK_SRC_EXTERNAL +}; + +static void poch_card_clock_on(void __iomem *fpga) +{ + /* FIXME: Get this data through sysfs? */ + enum clk_src clk_src = CLK_SRC_ON_BOARD; + + if (clk_src == CLK_SRC_ON_BOARD) { + iowrite32(FPGA_ADC_CLOCK_LOCAL_CLK | FPGA_ADC_CLOCK_CTL_OSC_EN, + fpga + FPGA_ADC_CLOCK_CTL_REG); + } else if (clk_src == CLK_SRC_EXTERNAL) { + iowrite32(FPGA_ADC_CLOCK_EXT_SAMP_CLK, + fpga + FPGA_ADC_CLOCK_CTL_REG); + } +} + +static int poch_card_power_on(struct poch_dev *poch_dev) +{ + void __iomem *bridge = poch_dev->bridge_iomem; + void __iomem *fpga = poch_dev->fpga_iomem; + + iowrite32(BRIDGE_CARD_POWER_EN, bridge + BRIDGE_CARD_POWER_REG); + + if (poch_wait_fpga_prog(bridge) != 0) { + poch_card_power_off(poch_dev); + return -EIO; + } + + poch_card_clock_on(fpga); + + /* Sync to new clock, reset state machines, set DMA mode. */ + iowrite32(FPGA_DOM_DCM_RESET | FPGA_DOM_SOFT_RESET + | FPGA_DOM_DUAL_M_SG_DMA, fpga + FPGA_DOM_REG); + + /* FIXME: The time required for sync. needs to be tuned. */ + msleep(1000); + + return 0; +} + +static void poch_channel_analog_on(struct channel_info *channel) +{ + void __iomem *fpga = channel->fpga_iomem; + u32 adc_dac_en; + + spin_lock(channel->iomem_lock); + adc_dac_en = ioread32(fpga + FPGA_ADC_DAC_EN_REG); + switch (channel->chno) { + case CHNO_RX_CHANNEL: + iowrite32(adc_dac_en & ~FPGA_ADC_DAC_EN_ADC_OFF, + fpga + FPGA_ADC_DAC_EN_REG); + break; + case CHNO_TX_CHANNEL: + iowrite32(adc_dac_en & ~FPGA_ADC_DAC_EN_DAC_OFF, + fpga + FPGA_ADC_DAC_EN_REG); + break; + } + spin_unlock(channel->iomem_lock); +} + +static int poch_open(struct inode *inode, struct file *filp) +{ + struct poch_dev *poch_dev; + struct channel_info *channel; + void __iomem *bridge; + void __iomem *fpga; + int chno; + int usage; + int ret; + + poch_dev = container_of(inode->i_cdev, struct poch_dev, cdev); + bridge = poch_dev->bridge_iomem; + fpga = poch_dev->fpga_iomem; + + chno = iminor(inode) % poch_dev->nchannels; + channel = &poch_dev->channels[chno]; + + if (!atomic_dec_and_test(&channel->free)) { + atomic_inc(&channel->free); + ret = -EBUSY; + goto out; + } + + usage = atomic_inc_return(&poch_dev->usage); + + printk(KERN_WARNING "poch_card_power_on\n"); + + if (usage == 1) { + ret = poch_card_power_on(poch_dev); + if (ret) + goto out_dec_usage; + } + + printk(KERN_INFO "CardBus Bridge Revision: %x\n", + ioread32(bridge + BRIDGE_REV_REG)); + printk(KERN_INFO "CardBus Interface Revision: %x\n", + ioread32(fpga + FPGA_IFACE_REV_REG)); + + channel->chno = chno; + filp->private_data = channel; + + printk(KERN_WARNING "poch_channel_init\n"); + + ret = poch_channel_init(channel, poch_dev); + if (ret) + goto out_power_off; + + poch_channel_analog_on(channel); + + printk(KERN_WARNING "channel_dma_init\n"); + + channel_dma_init(channel); + + printk(KERN_WARNING "poch_channel_analog_on\n"); + + if (usage == 1) { + printk(KERN_WARNING "setting up DMA\n"); + + /* Initialize DMA Controller. */ + iowrite32(FPGA_CAP_FIFO_REG, bridge + BRIDGE_STAT_2_REG); + iowrite32(FPGA_DMA_DESC_1_REG, bridge + BRIDGE_STAT_3_REG); + + ioread32(fpga + FPGA_DMA_INT_STAT_REG); + ioread32(fpga + FPGA_INT_STAT_REG); + ioread32(bridge + BRIDGE_INT_STAT_REG); + + /* Initialize Interrupts. FIXME: Enable temperature + * handling We are enabling both Tx and Rx channel + * interrupts here. Do we need to enable interrupts + * only for the current channel? Anyways we won't get + * the interrupt unless the DMA is activated. + */ + iowrite32(BRIDGE_INT_FPGA, bridge + BRIDGE_INT_MASK_REG); + iowrite32(FPGA_INT_DMA_CORE + | FPGA_INT_PLL_UNLOCKED + | FPGA_INT_TX_FF_EMPTY + | FPGA_INT_RX_FF_EMPTY + | FPGA_INT_TX_FF_OVRFLW + | FPGA_INT_RX_FF_OVRFLW, + fpga + FPGA_INT_MASK_REG); + iowrite32(FPGA_DMA_INT_RX | FPGA_DMA_INT_TX, + fpga + FPGA_DMA_INT_MASK_REG); + } + + if (channel->dir == CHANNEL_DIR_TX) { + /* Flush TX FIFO and output data from cardbus. */ + iowrite32(FPGA_TX_CTL_FIFO_FLUSH + | FPGA_TX_CTL_OUTPUT_CARDBUS, + fpga + FPGA_TX_CTL_REG); + } + + atomic_inc(&channel->inited); + + return 0; + + out_power_off: + if (usage == 1) + poch_card_power_off(poch_dev); + out_dec_usage: + atomic_dec(&poch_dev->usage); + atomic_inc(&channel->free); + out: + return ret; +} + +static int poch_release(struct inode *inode, struct file *filp) +{ + struct channel_info *channel = filp->private_data; + struct poch_dev *poch_dev; + int usage; + + poch_dev = container_of(inode->i_cdev, struct poch_dev, cdev); + + usage = atomic_dec_return(&poch_dev->usage); + if (usage == 0) { + printk(KERN_WARNING "poch_card_power_off\n"); + poch_card_power_off(poch_dev); + } + + atomic_dec(&channel->inited); + poch_channel_free_header(channel); + poch_channel_free_groups(channel); + kfree(channel->groups); + atomic_inc(&channel->free); + + return 0; +} + +/* + * Map the header and the group buffers, to user space. + */ +static int poch_mmap(struct file *filp, struct vm_area_struct *vma) +{ + struct channel_info *channel = filp->private_data; + + unsigned long start; + unsigned long size; + + unsigned long group_pages; + unsigned long header_pages; + unsigned long total_group_pages; + + int pg_num; + struct page *pg; + + int i; + int ret; + + printk(KERN_WARNING "poch_mmap\n"); + + if (vma->vm_pgoff) { + printk(KERN_WARNING PFX "page offset: %lu\n", vma->vm_pgoff); + return -EINVAL; + } + + group_pages = (channel->group_size / PAGE_SIZE) + 1; + header_pages = (channel->header_size / PAGE_SIZE) + 1; + total_group_pages = group_pages * channel->group_count; + + size = vma->vm_end - vma->vm_start; + if (size != (header_pages + total_group_pages) * PAGE_SIZE) { + printk(KERN_WARNING PFX "required %lu bytes\n", size); + return -EINVAL; + } + + start = vma->vm_start; + + /* FIXME: Cleanup required on failure? */ + pg = channel->header_pg; + for (pg_num = 0; pg_num < header_pages; pg_num++, pg++) { + printk(KERN_DEBUG PFX "page_count: %d\n", page_count(pg)); + printk(KERN_DEBUG PFX "%d: header: 0x%lx\n", pg_num, start); + ret = vm_insert_page(vma, start, pg); + if (ret) { + printk(KERN_DEBUG "vm_insert 1 failed at %lx\n", start); + return ret; + } + start += PAGE_SIZE; + } + + for (i = 0; i < channel->group_count; i++) { + pg = channel->groups[i].pg; + for (pg_num = 0; pg_num < group_pages; pg_num++, pg++) { + printk(KERN_DEBUG PFX "%d: group %d: 0x%lx\n", + pg_num, i, start); + ret = vm_insert_page(vma, start, pg); + if (ret) { + printk(KERN_DEBUG PFX + "vm_insert 2 failed at %d\n", pg_num); + return ret; + } + start += PAGE_SIZE; + } + } + + return 0; +} + +/* + * Check whether there is some group that the user space has not + * consumed yet. When the user space consumes a group, it sets it to + * -1. Cosuming could be reading data in case of RX and filling a + * buffer in case of TX. + */ +static int poch_channel_available(struct channel_info *channel) +{ + int i; + + spin_lock_irq(&channel->group_offsets_lock); + + for (i = 0; i < channel->group_count; i++) { + if (channel->dir == CHANNEL_DIR_RX + && channel->header->group_offsets[i] == -1) { + spin_unlock_irq(&channel->group_offsets_lock); + return 1; + } + + if (channel->dir == CHANNEL_DIR_TX + && channel->header->group_offsets[i] != -1) { + spin_unlock_irq(&channel->group_offsets_lock); + return 1; + } + } + + spin_unlock_irq(&channel->group_offsets_lock); + + return 0; +} + +static unsigned int poch_poll(struct file *filp, poll_table *pt) +{ + struct channel_info *channel = filp->private_data; + unsigned int ret = 0; + + poll_wait(filp, &channel->wq, pt); + + if (poch_channel_available(channel)) { + if (channel->dir == CHANNEL_DIR_RX) + ret = POLLIN | POLLRDNORM; + else + ret = POLLOUT | POLLWRNORM; + } + + return ret; +} + +static int poch_ioctl(struct inode *inode, struct file *filp, + unsigned int cmd, unsigned long arg) +{ + struct channel_info *channel = filp->private_data; + void __iomem *fpga = channel->fpga_iomem; + void __iomem *bridge = channel->bridge_iomem; + void __user *argp = (void __user *)arg; + struct vm_area_struct *vms; + struct poch_counters counters; + int ret; + + switch (cmd) { + case POCH_IOC_TRANSFER_START: + switch (channel->chno) { + case CHNO_TX_CHANNEL: + printk(KERN_INFO PFX "ioctl: Tx start\n"); + iowrite32(0x1, fpga + FPGA_TX_TRIGGER_REG); + iowrite32(0x1, fpga + FPGA_TX_ENABLE_REG); + + /* FIXME: Does it make sense to do a DMA GO + * twice, once in Tx and once in Rx. + */ + iowrite32(0x1, bridge + BRIDGE_DMA_GO_REG); + break; + case CHNO_RX_CHANNEL: + printk(KERN_INFO PFX "ioctl: Rx start\n"); + iowrite32(0x1, fpga + FPGA_RX_ARM_REG); + iowrite32(0x1, bridge + BRIDGE_DMA_GO_REG); + break; + } + break; + case POCH_IOC_TRANSFER_STOP: + switch (channel->chno) { + case CHNO_TX_CHANNEL: + printk(KERN_INFO PFX "ioctl: Tx stop\n"); + iowrite32(0x0, fpga + FPGA_TX_ENABLE_REG); + iowrite32(0x0, fpga + FPGA_TX_TRIGGER_REG); + iowrite32(0x0, bridge + BRIDGE_DMA_GO_REG); + break; + case CHNO_RX_CHANNEL: + printk(KERN_INFO PFX "ioctl: Rx stop\n"); + iowrite32(0x0, fpga + FPGA_RX_ARM_REG); + iowrite32(0x0, bridge + BRIDGE_DMA_GO_REG); + break; + } + break; + case POCH_IOC_GET_COUNTERS: + if (access_ok(VERIFY_WRITE, argp, sizeof(struct poch_counters))) + return -EFAULT; + + spin_lock_irq(&channel->counters_lock); + counters = channel->counters; + __poch_channel_clear_counters(channel); + spin_unlock_irq(&channel->counters_lock); + + ret = copy_to_user(argp, &counters, + sizeof(struct poch_counters)); + if (ret) + return ret; + + break; + case POCH_IOC_SYNC_GROUP_FOR_USER: + case POCH_IOC_SYNC_GROUP_FOR_DEVICE: + vms = find_vma(current->mm, arg); + if (!vms) + /* Address not mapped. */ + return -EINVAL; + if (vms->vm_file != filp) + /* Address mapped from different device/file. */ + return -EINVAL; + + flush_cache_range(vms, arg, arg + channel->group_size); + break; + } + return 0; +} + +static struct file_operations poch_fops = { + .owner = THIS_MODULE, + .open = poch_open, + .release = poch_release, + .ioctl = poch_ioctl, + .poll = poch_poll, + .mmap = poch_mmap +}; + +static void poch_irq_dma(struct channel_info *channel) +{ + u32 prev_transfer; + u32 curr_transfer; + long groups_done; + unsigned long i, j; + struct poch_group_info *groups; + s32 *group_offsets; + u32 curr_group_reg; + + if (!atomic_read(&channel->inited)) + return; + + prev_transfer = channel->transfer; + + if (channel->chno == CHNO_RX_CHANNEL) + curr_group_reg = FPGA_RX_CURR_GROUP_REG; + else + curr_group_reg = FPGA_TX_CURR_GROUP_REG; + + curr_transfer = ioread32(channel->fpga_iomem + curr_group_reg); + + groups_done = curr_transfer - prev_transfer; + /* Check wrap over, and handle it. */ + if (groups_done <= 0) + groups_done += channel->group_count; + + group_offsets = channel->header->group_offsets; + groups = channel->groups; + + spin_lock(&channel->group_offsets_lock); + + for (i = 0; i < groups_done; i++) { + j = (prev_transfer + i) % channel->group_count; + if (channel->dir == CHANNEL_DIR_RX) + group_offsets[j] = -1; + else + group_offsets[j] = groups[j].user_offset; + } + + spin_unlock(&channel->group_offsets_lock); + + channel->transfer = curr_transfer; + + wake_up_interruptible(&channel->wq); +} + +static irqreturn_t poch_irq_handler(int irq, void *p) +{ + struct poch_dev *poch_dev = p; + void __iomem *bridge = poch_dev->bridge_iomem; + void __iomem *fpga = poch_dev->fpga_iomem; + struct channel_info *channel_rx = &poch_dev->channels[CHNO_RX_CHANNEL]; + struct channel_info *channel_tx = &poch_dev->channels[CHNO_TX_CHANNEL]; + u32 bridge_stat; + u32 fpga_stat; + u32 dma_stat; + + bridge_stat = ioread32(bridge + BRIDGE_INT_STAT_REG); + fpga_stat = ioread32(fpga + FPGA_INT_STAT_REG); + dma_stat = ioread32(fpga + FPGA_DMA_INT_STAT_REG); + + ioread32(fpga + FPGA_DMA_INT_STAT_REG); + ioread32(fpga + FPGA_INT_STAT_REG); + ioread32(bridge + BRIDGE_INT_STAT_REG); + + if (bridge_stat & BRIDGE_INT_FPGA) { + if (fpga_stat & FPGA_INT_DMA_CORE) { + if (dma_stat & FPGA_DMA_INT_RX) + poch_irq_dma(channel_rx); + if (dma_stat & FPGA_DMA_INT_TX) + poch_irq_dma(channel_tx); + } + if (fpga_stat & FPGA_INT_PLL_UNLOCKED) { + channel_tx->counters.pll_unlock++; + channel_rx->counters.pll_unlock++; + if (printk_ratelimit()) + printk(KERN_WARNING PFX "PLL unlocked\n"); + } + if (fpga_stat & FPGA_INT_TX_FF_EMPTY) + channel_tx->counters.fifo_empty++; + if (fpga_stat & FPGA_INT_TX_FF_OVRFLW) + channel_tx->counters.fifo_overflow++; + if (fpga_stat & FPGA_INT_RX_FF_EMPTY) + channel_rx->counters.fifo_empty++; + if (fpga_stat & FPGA_INT_RX_FF_OVRFLW) + channel_rx->counters.fifo_overflow++; + + /* + * FIXME: These errors should be notified through the + * poll interface as POLLERR. + */ + + /* Re-enable interrupts. */ + iowrite32(BRIDGE_INT_FPGA, bridge + BRIDGE_INT_MASK_REG); + + return IRQ_HANDLED; + } + + return IRQ_NONE; +} + +static void poch_class_dev_unregister(struct poch_dev *poch_dev, int id) +{ + int i, j; + int nattrs; + struct channel_info *channel; + dev_t devno; + + if (poch_dev->dev == NULL) + return; + + for (i = 0; i < poch_dev->nchannels; i++) { + channel = &poch_dev->channels[i]; + devno = poch_first_dev + (id * poch_dev->nchannels) + i; + + if (!channel->dev) + continue; + + nattrs = sizeof(poch_class_attrs)/sizeof(poch_class_attrs[0]); + for (j = 0; j < nattrs; j++) + device_remove_file(channel->dev, poch_class_attrs[j]); + + device_unregister(channel->dev); + } + + device_unregister(poch_dev->dev); +} + +static int __devinit poch_class_dev_register(struct poch_dev *poch_dev, + int id) +{ + struct device *dev = &poch_dev->pci_dev->dev; + int i, j; + int nattrs; + int ret; + struct channel_info *channel; + dev_t devno; + + poch_dev->dev = device_create(poch_cls, &poch_dev->pci_dev->dev, + MKDEV(0, 0), NULL, "poch%d", id); + if (IS_ERR(poch_dev->dev)) { + dev_err(dev, "error creating parent class device"); + ret = PTR_ERR(poch_dev->dev); + poch_dev->dev = NULL; + return ret; + } + + for (i = 0; i < poch_dev->nchannels; i++) { + channel = &poch_dev->channels[i]; + + devno = poch_first_dev + (id * poch_dev->nchannels) + i; + channel->dev = device_create(poch_cls, poch_dev->dev, devno, + NULL, "ch%d", i); + if (IS_ERR(channel->dev)) { + dev_err(dev, "error creating channel class device"); + ret = PTR_ERR(channel->dev); + channel->dev = NULL; + poch_class_dev_unregister(poch_dev, id); + return ret; + } + + dev_set_drvdata(channel->dev, channel); + nattrs = sizeof(poch_class_attrs)/sizeof(poch_class_attrs[0]); + for (j = 0; j < nattrs; j++) { + ret = device_create_file(channel->dev, + poch_class_attrs[j]); + if (ret) { + dev_err(dev, "error creating attribute file"); + poch_class_dev_unregister(poch_dev, id); + return ret; + } + } + } + + return 0; +} + +static int __devinit poch_pci_probe(struct pci_dev *pdev, + const struct pci_device_id *pci_id) +{ + struct device *dev = &pdev->dev; + struct poch_dev *poch_dev; + struct uio_info *uio; + int ret; + int id; + int i; + + poch_dev = kzalloc(sizeof(struct poch_dev), GFP_KERNEL); + if (!poch_dev) { + dev_err(dev, "error allocating priv. data memory\n"); + return -ENOMEM; + } + + poch_dev->pci_dev = pdev; + uio = &poch_dev->uio; + + pci_set_drvdata(pdev, poch_dev); + + spin_lock_init(&poch_dev->iomem_lock); + + poch_dev->nchannels = POCH_NCHANNELS; + poch_dev->channels[CHNO_RX_CHANNEL].dir = CHANNEL_DIR_RX; + poch_dev->channels[CHNO_TX_CHANNEL].dir = CHANNEL_DIR_TX; + + for (i = 0; i < poch_dev->nchannels; i++) { + init_waitqueue_head(&poch_dev->channels[i].wq); + atomic_set(&poch_dev->channels[i].free, 1); + atomic_set(&poch_dev->channels[i].inited, 0); + } + + ret = pci_enable_device(pdev); + if (ret) { + dev_err(dev, "error enabling device\n"); + goto out_free; + } + + ret = pci_request_regions(pdev, "poch"); + if (ret) { + dev_err(dev, "error requesting resources\n"); + goto out_disable; + } + + uio->mem[0].addr = pci_resource_start(pdev, 1); + if (!uio->mem[0].addr) { + dev_err(dev, "invalid BAR1\n"); + ret = -ENODEV; + goto out_release; + } + + uio->mem[0].size = pci_resource_len(pdev, 1); + uio->mem[0].memtype = UIO_MEM_PHYS; + + uio->name = "poch"; + uio->version = "0.0.1"; + uio->irq = -1; + ret = uio_register_device(dev, uio); + if (ret) { + dev_err(dev, "error register UIO device: %d\n", ret); + goto out_release; + } + + poch_dev->bridge_iomem = ioremap(pci_resource_start(pdev, 0), + pci_resource_len(pdev, 0)); + if (poch_dev->bridge_iomem == NULL) { + dev_err(dev, "error mapping bridge (bar0) registers\n"); + ret = -ENOMEM; + goto out_uio_unreg; + } + + poch_dev->fpga_iomem = ioremap(pci_resource_start(pdev, 1), + pci_resource_len(pdev, 1)); + if (poch_dev->fpga_iomem == NULL) { + dev_err(dev, "error mapping fpga (bar1) registers\n"); + ret = -ENOMEM; + goto out_bar0_unmap; + } + + ret = request_irq(pdev->irq, poch_irq_handler, IRQF_SHARED, + dev->bus_id, poch_dev); + if (ret) { + dev_err(dev, "error requesting IRQ %u\n", pdev->irq); + ret = -ENOMEM; + goto out_bar1_unmap; + } + + if (!idr_pre_get(&poch_ids, GFP_KERNEL)) { + dev_err(dev, "error allocating memory ids\n"); + ret = -ENOMEM; + goto out_free_irq; + } + + idr_get_new(&poch_ids, poch_dev, &id); + if (id >= MAX_POCH_CARDS) { + dev_err(dev, "minors exhausted\n"); + ret = -EBUSY; + goto out_free_irq; + } + + cdev_init(&poch_dev->cdev, &poch_fops); + poch_dev->cdev.owner = THIS_MODULE; + ret = cdev_add(&poch_dev->cdev, + poch_first_dev + (id * poch_dev->nchannels), + poch_dev->nchannels); + if (ret) { + dev_err(dev, "error register character device\n"); + goto out_idr_remove; + } + + ret = poch_class_dev_register(poch_dev, id); + if (ret) + goto out_cdev_del; + + return 0; + + out_cdev_del: + cdev_del(&poch_dev->cdev); + out_idr_remove: + idr_remove(&poch_ids, id); + out_free_irq: + free_irq(pdev->irq, poch_dev); + out_bar1_unmap: + iounmap(poch_dev->fpga_iomem); + out_bar0_unmap: + iounmap(poch_dev->bridge_iomem); + out_uio_unreg: + uio_unregister_device(uio); + out_release: + pci_release_regions(pdev); + out_disable: + pci_disable_device(pdev); + out_free: + kfree(poch_dev); + return ret; +} + +/* + * FIXME: We are yet to handle the hot unplug case. + */ +static void poch_pci_remove(struct pci_dev *pdev) +{ + struct poch_dev *poch_dev = pci_get_drvdata(pdev); + struct uio_info *uio = &poch_dev->uio; + unsigned int minor = MINOR(poch_dev->cdev.dev); + unsigned int id = minor / poch_dev->nchannels; + + /* FIXME: unmap fpga_iomem and bridge_iomem */ + + poch_class_dev_unregister(poch_dev, id); + cdev_del(&poch_dev->cdev); + idr_remove(&poch_ids, id); + free_irq(pdev->irq, poch_dev); + uio_unregister_device(uio); + pci_release_regions(pdev); + pci_disable_device(pdev); + pci_set_drvdata(pdev, NULL); + iounmap(uio->mem[0].internal_addr); + + kfree(poch_dev); +} + +static const struct pci_device_id poch_pci_ids[] /* __devinitconst */ = { + { PCI_DEVICE(PCI_VENDOR_ID_RRAPIDS, + PCI_DEVICE_ID_RRAPIDS_POCKET_CHANGE) }, + { 0, } +}; + +static struct pci_driver poch_pci_driver = { + .name = DRV_NAME, + .id_table = poch_pci_ids, + .probe = poch_pci_probe, + .remove = poch_pci_remove, +}; + +static int __init poch_init_module(void) +{ + int ret = 0; + + ret = alloc_chrdev_region(&poch_first_dev, 0, + MAX_POCH_DEVICES, DRV_NAME); + if (ret) { + printk(KERN_ERR PFX "error allocating device no."); + return ret; + } + + poch_cls = class_create(THIS_MODULE, "pocketchange"); + if (IS_ERR(poch_cls)) { + ret = PTR_ERR(poch_cls); + goto out_unreg_chrdev; + } + + ret = pci_register_driver(&poch_pci_driver); + if (ret) { + printk(KERN_ERR PFX "error register PCI device"); + goto out_class_destroy; + } + + return 0; + + out_class_destroy: + class_destroy(poch_cls); + + out_unreg_chrdev: + unregister_chrdev_region(poch_first_dev, MAX_POCH_DEVICES); + + return ret; +} + +static void __exit poch_exit_module(void) +{ + pci_unregister_driver(&poch_pci_driver); + class_destroy(poch_cls); + unregister_chrdev_region(poch_first_dev, MAX_POCH_DEVICES); +} + +module_init(poch_init_module); +module_exit(poch_exit_module); + +MODULE_LICENSE("GPL v2"); diff --git a/drivers/staging/poch/poch.h b/drivers/staging/poch/poch.h new file mode 100644 index 000000000000..51a2d145798e --- /dev/null +++ b/drivers/staging/poch/poch.h @@ -0,0 +1,29 @@ +/* + * User-space DMA and UIO based Redrapids Pocket Change CardBus driver + * + * Copyright 2008 Vijay Kumar <vijaykumar@bravegnu.org> + * + * Part of userspace API. Should be moved to a header file in + * include/linux for final version. + * + */ +struct poch_cbuf_header { + __s32 group_size_bytes; + __s32 group_count; + __s32 group_offsets[0]; +}; + +struct poch_counters { + __u32 fifo_empty; + __u32 fifo_overflow; + __u32 pll_unlock; +}; + +#define POCH_IOC_NUM '9' + +#define POCH_IOC_TRANSFER_START _IO(POCH_IOC_NUM, 0) +#define POCH_IOC_TRANSFER_STOP _IO(POCH_IOC_NUM, 1) +#define POCH_IOC_GET_COUNTERS _IOR(POCH_IOC_NUM, 2, \ + struct poch_counters) +#define POCH_IOC_SYNC_GROUP_FOR_USER _IO(POCH_IOC_NUM, 3) +#define POCH_IOC_SYNC_GROUP_FOR_DEVICE _IO(POCH_IOC_NUM, 4) diff --git a/drivers/staging/slicoss/slicoss.c b/drivers/staging/slicoss/slicoss.c index b61ac4b2db9e..8fa9490b3e2c 100644 --- a/drivers/staging/slicoss/slicoss.c +++ b/drivers/staging/slicoss/slicoss.c @@ -54,7 +54,6 @@ * IS-NIC driver. */ -#include <linux/version.h> #define SLIC_DUMP_ENABLED 0 #define KLUDGE_FOR_4GB_BOUNDARY 1 @@ -96,17 +95,9 @@ #include <linux/moduleparam.h> #include <linux/types.h> -#include <linux/slab.h> -#include <linux/delay.h> -#include <linux/init.h> -#include <linux/pci.h> #include <linux/dma-mapping.h> -#include <linux/netdevice.h> -#include <linux/etherdevice.h> #include <linux/mii.h> #include <linux/if_vlan.h> -#include <linux/skbuff.h> -#include <linux/string.h> #include <asm/unaligned.h> #include <linux/ethtool.h> @@ -275,7 +266,6 @@ static void slic_dbg_register_trace(struct adapter *adapter, card->reg_value[i], card->reg_valueh[i]); } } -} #endif static void slic_init_adapter(struct net_device *netdev, @@ -606,6 +596,7 @@ static void __devexit slic_entry_remove(struct pci_dev *pcidev) uint mmio_len = 0; struct adapter *adapter = (struct adapter *) netdev_priv(dev); struct sliccard *card; + struct mcast_address *mcaddr, *mlist; ASSERT(adapter); DBG_MSG("slicoss: %s ENTER dev[%p] adapter[%p]\n", __func__, dev, @@ -625,6 +616,13 @@ static void __devexit slic_entry_remove(struct pci_dev *pcidev) DBG_MSG("slicoss: %s iounmap dev->base_addr[%x]\n", __func__, (uint) dev->base_addr); iounmap((void __iomem *)dev->base_addr); + /* free multicast addresses */ + mlist = adapter->mcastaddrs; + while (mlist) { + mcaddr = mlist; + mlist = mlist->next; + kfree(mcaddr); + } ASSERT(adapter->card); card = adapter->card; ASSERT(card->adapters_allocated); diff --git a/drivers/staging/sxg/README b/drivers/staging/sxg/README index 4d1ddbe4c335..d514d1848803 100644 --- a/drivers/staging/sxg/README +++ b/drivers/staging/sxg/README @@ -7,6 +7,7 @@ TODO: - remove wrappers - checkpatch.pl cleanups - new functionality that the card needs + - remove reliance on x86 Please send patches to: Greg Kroah-Hartman <gregkh@suse.de> diff --git a/drivers/staging/sxg/sxg.c b/drivers/staging/sxg/sxg.c index 6ccbee875ab3..5272a18e2043 100644 --- a/drivers/staging/sxg/sxg.c +++ b/drivers/staging/sxg/sxg.c @@ -112,12 +112,16 @@ static bool sxg_mac_filter(p_adapter_t adapter, static struct net_device_stats *sxg_get_stats(p_net_device dev); #endif +#define XXXTODO 0 + +#if XXXTODO static int sxg_mac_set_address(p_net_device dev, void *ptr); +static void sxg_mcast_set_list(p_net_device dev); +#endif static void sxg_adapter_set_hwaddr(p_adapter_t adapter); static void sxg_unmap_mmio_space(p_adapter_t adapter); -static void sxg_mcast_set_mask(p_adapter_t adapter); static int sxg_initialize_adapter(p_adapter_t adapter); static void sxg_stock_rcv_buffers(p_adapter_t adapter); @@ -132,9 +136,6 @@ static int sxg_write_mdio_reg(p_adapter_t adapter, u32 DevAddr, u32 RegAddr, u32 Value); static int sxg_read_mdio_reg(p_adapter_t adapter, u32 DevAddr, u32 RegAddr, u32 *pValue); -static void sxg_mcast_set_list(p_net_device dev); - -#define XXXTODO 0 static unsigned int sxg_first_init = 1; static char *sxg_banner = @@ -202,7 +203,7 @@ static void sxg_init_driver(void) { if (sxg_first_init) { DBG_ERROR("sxg: %s sxg_first_init set jiffies[%lx]\n", - __FUNCTION__, jiffies); + __func__, jiffies); sxg_first_init = 0; spin_lock_init(&sxg_global.driver_lock); } @@ -223,7 +224,7 @@ static void sxg_dbg_macaddrs(p_adapter_t adapter) return; } -// SXG Globals +/* SXG Globals */ static SXG_DRIVER SxgDriver; #ifdef ATKDBG @@ -250,7 +251,7 @@ static bool sxg_download_microcode(p_adapter_t adapter, SXG_UCODE_SEL UcodeSel) u32 ThisSectionSize; u32 *Instruction = NULL; u32 BaseAddress, AddressOffset, Address; -// u32 Failure; +/* u32 Failure; */ u32 ValueRead; u32 i; u32 numSections = 0; @@ -259,10 +260,10 @@ static bool sxg_download_microcode(p_adapter_t adapter, SXG_UCODE_SEL UcodeSel) SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "DnldUcod", adapter, 0, 0, 0); - DBG_ERROR("sxg: %s ENTER\n", __FUNCTION__); + DBG_ERROR("sxg: %s ENTER\n", __func__); switch (UcodeSel) { - case SXG_UCODE_SAHARA: // Sahara operational ucode + case SXG_UCODE_SAHARA: /* Sahara operational ucode */ numSections = SNumSections; for (i = 0; i < numSections; i++) { sectionSize[i] = SSectionSize[i]; @@ -276,13 +277,13 @@ static bool sxg_download_microcode(p_adapter_t adapter, SXG_UCODE_SEL UcodeSel) } DBG_ERROR("sxg: RESET THE CARD\n"); - // First, reset the card + /* First, reset the card */ WRITE_REG(HwRegs->Reset, 0xDEAD, FLUSH); - // Download each section of the microcode as specified in - // its download file. The *download.c file is generated using - // the saharaobjtoc facility which converts the metastep .obj - // file to a .c file which contains a two dimentional array. + /* Download each section of the microcode as specified in */ + /* its download file. The *download.c file is generated using */ + /* the saharaobjtoc facility which converts the metastep .obj */ + /* file to a .c file which contains a two dimentional array. */ for (Section = 0; Section < numSections; Section++) { DBG_ERROR("sxg: SECTION # %d\n", Section); switch (UcodeSel) { @@ -294,35 +295,35 @@ static bool sxg_download_microcode(p_adapter_t adapter, SXG_UCODE_SEL UcodeSel) break; } BaseAddress = sectionStart[Section]; - ThisSectionSize = sectionSize[Section] / 12; // Size in instructions + ThisSectionSize = sectionSize[Section] / 12; /* Size in instructions */ for (AddressOffset = 0; AddressOffset < ThisSectionSize; AddressOffset++) { Address = BaseAddress + AddressOffset; ASSERT((Address & ~MICROCODE_ADDRESS_MASK) == 0); - // Write instruction bits 31 - 0 + /* Write instruction bits 31 - 0 */ WRITE_REG(HwRegs->UcodeDataLow, *Instruction, FLUSH); - // Write instruction bits 63-32 + /* Write instruction bits 63-32 */ WRITE_REG(HwRegs->UcodeDataMiddle, *(Instruction + 1), FLUSH); - // Write instruction bits 95-64 + /* Write instruction bits 95-64 */ WRITE_REG(HwRegs->UcodeDataHigh, *(Instruction + 2), FLUSH); - // Write instruction address with the WRITE bit set + /* Write instruction address with the WRITE bit set */ WRITE_REG(HwRegs->UcodeAddr, (Address | MICROCODE_ADDRESS_WRITE), FLUSH); - // Sahara bug in the ucode download logic - the write to DataLow - // for the next instruction could get corrupted. To avoid this, - // write to DataLow again for this instruction (which may get - // corrupted, but it doesn't matter), then increment the address - // and write the data for the next instruction to DataLow. That - // write should succeed. + /* Sahara bug in the ucode download logic - the write to DataLow */ + /* for the next instruction could get corrupted. To avoid this, */ + /* write to DataLow again for this instruction (which may get */ + /* corrupted, but it doesn't matter), then increment the address */ + /* and write the data for the next instruction to DataLow. That */ + /* write should succeed. */ WRITE_REG(HwRegs->UcodeDataLow, *Instruction, TRUE); - // Advance 3 u32S to start of next instruction + /* Advance 3 u32S to start of next instruction */ Instruction += 3; } } - // Now repeat the entire operation reading the instruction back and - // checking for parity errors + /* Now repeat the entire operation reading the instruction back and */ + /* checking for parity errors */ for (Section = 0; Section < numSections; Section++) { DBG_ERROR("sxg: check SECTION # %d\n", Section); switch (UcodeSel) { @@ -334,74 +335,74 @@ static bool sxg_download_microcode(p_adapter_t adapter, SXG_UCODE_SEL UcodeSel) break; } BaseAddress = sectionStart[Section]; - ThisSectionSize = sectionSize[Section] / 12; // Size in instructions + ThisSectionSize = sectionSize[Section] / 12; /* Size in instructions */ for (AddressOffset = 0; AddressOffset < ThisSectionSize; AddressOffset++) { Address = BaseAddress + AddressOffset; - // Write the address with the READ bit set + /* Write the address with the READ bit set */ WRITE_REG(HwRegs->UcodeAddr, (Address | MICROCODE_ADDRESS_READ), FLUSH); - // Read it back and check parity bit. + /* Read it back and check parity bit. */ READ_REG(HwRegs->UcodeAddr, ValueRead); if (ValueRead & MICROCODE_ADDRESS_PARITY) { DBG_ERROR("sxg: %s PARITY ERROR\n", - __FUNCTION__); + __func__); - return (FALSE); // Parity error + return (FALSE); /* Parity error */ } ASSERT((ValueRead & MICROCODE_ADDRESS_MASK) == Address); - // Read the instruction back and compare + /* Read the instruction back and compare */ READ_REG(HwRegs->UcodeDataLow, ValueRead); if (ValueRead != *Instruction) { DBG_ERROR("sxg: %s MISCOMPARE LOW\n", - __FUNCTION__); - return (FALSE); // Miscompare + __func__); + return (FALSE); /* Miscompare */ } READ_REG(HwRegs->UcodeDataMiddle, ValueRead); if (ValueRead != *(Instruction + 1)) { DBG_ERROR("sxg: %s MISCOMPARE MIDDLE\n", - __FUNCTION__); - return (FALSE); // Miscompare + __func__); + return (FALSE); /* Miscompare */ } READ_REG(HwRegs->UcodeDataHigh, ValueRead); if (ValueRead != *(Instruction + 2)) { DBG_ERROR("sxg: %s MISCOMPARE HIGH\n", - __FUNCTION__); - return (FALSE); // Miscompare + __func__); + return (FALSE); /* Miscompare */ } - // Advance 3 u32S to start of next instruction + /* Advance 3 u32S to start of next instruction */ Instruction += 3; } } - // Everything OK, Go. + /* Everything OK, Go. */ WRITE_REG(HwRegs->UcodeAddr, MICROCODE_ADDRESS_GO, FLUSH); - // Poll the CardUp register to wait for microcode to initialize - // Give up after 10,000 attemps (500ms). + /* Poll the CardUp register to wait for microcode to initialize */ + /* Give up after 10,000 attemps (500ms). */ for (i = 0; i < 10000; i++) { udelay(50); READ_REG(adapter->UcodeRegs[0].CardUp, ValueRead); if (ValueRead == 0xCAFE) { - DBG_ERROR("sxg: %s BOO YA 0xCAFE\n", __FUNCTION__); + DBG_ERROR("sxg: %s BOO YA 0xCAFE\n", __func__); break; } } if (i == 10000) { - DBG_ERROR("sxg: %s TIMEOUT\n", __FUNCTION__); + DBG_ERROR("sxg: %s TIMEOUT\n", __func__); - return (FALSE); // Timeout + return (FALSE); /* Timeout */ } - // Now write the LoadSync register. This is used to - // synchronize with the card so it can scribble on the memory - // that contained 0xCAFE from the "CardUp" step above + /* Now write the LoadSync register. This is used to */ + /* synchronize with the card so it can scribble on the memory */ + /* that contained 0xCAFE from the "CardUp" step above */ if (UcodeSel == SXG_UCODE_SAHARA) { WRITE_REG(adapter->UcodeRegs[0].LoadSync, 0, FLUSH); } SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "XDnldUcd", adapter, 0, 0, 0); - DBG_ERROR("sxg: %s EXIT\n", __FUNCTION__); + DBG_ERROR("sxg: %s EXIT\n", __func__); return (TRUE); } @@ -420,29 +421,29 @@ static int sxg_allocate_resources(p_adapter_t adapter) int status; u32 i; u32 RssIds, IsrCount; -// PSXG_XMT_RING XmtRing; -// PSXG_RCV_RING RcvRing; +/* PSXG_XMT_RING XmtRing; */ +/* PSXG_RCV_RING RcvRing; */ - DBG_ERROR("%s ENTER\n", __FUNCTION__); + DBG_ERROR("%s ENTER\n", __func__); SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "AllocRes", adapter, 0, 0, 0); - // Windows tells us how many CPUs it plans to use for - // RSS + /* Windows tells us how many CPUs it plans to use for */ + /* RSS */ RssIds = SXG_RSS_CPU_COUNT(adapter); IsrCount = adapter->MsiEnabled ? RssIds : 1; - DBG_ERROR("%s Setup the spinlocks\n", __FUNCTION__); + DBG_ERROR("%s Setup the spinlocks\n", __func__); - // Allocate spinlocks and initialize listheads first. + /* Allocate spinlocks and initialize listheads first. */ spin_lock_init(&adapter->RcvQLock); spin_lock_init(&adapter->SglQLock); spin_lock_init(&adapter->XmtZeroLock); spin_lock_init(&adapter->Bit64RegLock); spin_lock_init(&adapter->AdapterLock); - DBG_ERROR("%s Setup the lists\n", __FUNCTION__); + DBG_ERROR("%s Setup the lists\n", __func__); InitializeListHead(&adapter->FreeRcvBuffers); InitializeListHead(&adapter->FreeRcvBlocks); @@ -450,39 +451,39 @@ static int sxg_allocate_resources(p_adapter_t adapter) InitializeListHead(&adapter->FreeSglBuffers); InitializeListHead(&adapter->AllSglBuffers); - // Mark these basic allocations done. This flags essentially - // tells the SxgFreeResources routine that it can grab spinlocks - // and reference listheads. + /* Mark these basic allocations done. This flags essentially */ + /* tells the SxgFreeResources routine that it can grab spinlocks */ + /* and reference listheads. */ adapter->BasicAllocations = TRUE; - // Main allocation loop. Start with the maximum supported by - // the microcode and back off if memory allocation - // fails. If we hit a minimum, fail. + /* Main allocation loop. Start with the maximum supported by */ + /* the microcode and back off if memory allocation */ + /* fails. If we hit a minimum, fail. */ for (;;) { - DBG_ERROR("%s Allocate XmtRings size[%lx]\n", __FUNCTION__, - (sizeof(SXG_XMT_RING) * 1)); + DBG_ERROR("%s Allocate XmtRings size[%x]\n", __func__, + (unsigned int)(sizeof(SXG_XMT_RING) * 1)); - // Start with big items first - receive and transmit rings. At the moment - // I'm going to keep the ring size fixed and adjust the number of - // TCBs if we fail. Later we might consider reducing the ring size as well.. + /* Start with big items first - receive and transmit rings. At the moment */ + /* I'm going to keep the ring size fixed and adjust the number of */ + /* TCBs if we fail. Later we might consider reducing the ring size as well.. */ adapter->XmtRings = pci_alloc_consistent(adapter->pcidev, sizeof(SXG_XMT_RING) * 1, &adapter->PXmtRings); - DBG_ERROR("%s XmtRings[%p]\n", __FUNCTION__, adapter->XmtRings); + DBG_ERROR("%s XmtRings[%p]\n", __func__, adapter->XmtRings); if (!adapter->XmtRings) { goto per_tcb_allocation_failed; } memset(adapter->XmtRings, 0, sizeof(SXG_XMT_RING) * 1); - DBG_ERROR("%s Allocate RcvRings size[%lx]\n", __FUNCTION__, - (sizeof(SXG_RCV_RING) * 1)); + DBG_ERROR("%s Allocate RcvRings size[%x]\n", __func__, + (unsigned int)(sizeof(SXG_RCV_RING) * 1)); adapter->RcvRings = pci_alloc_consistent(adapter->pcidev, sizeof(SXG_RCV_RING) * 1, &adapter->PRcvRings); - DBG_ERROR("%s RcvRings[%p]\n", __FUNCTION__, adapter->RcvRings); + DBG_ERROR("%s RcvRings[%p]\n", __func__, adapter->RcvRings); if (!adapter->RcvRings) { goto per_tcb_allocation_failed; } @@ -490,7 +491,7 @@ static int sxg_allocate_resources(p_adapter_t adapter) break; per_tcb_allocation_failed: - // an allocation failed. Free any successful allocations. + /* an allocation failed. Free any successful allocations. */ if (adapter->XmtRings) { pci_free_consistent(adapter->pcidev, sizeof(SXG_XMT_RING) * 4096, @@ -505,22 +506,22 @@ static int sxg_allocate_resources(p_adapter_t adapter) adapter->PRcvRings); adapter->RcvRings = NULL; } - // Loop around and try again.... + /* Loop around and try again.... */ } - DBG_ERROR("%s Initialize RCV ZERO and XMT ZERO rings\n", __FUNCTION__); - // Initialize rcv zero and xmt zero rings + DBG_ERROR("%s Initialize RCV ZERO and XMT ZERO rings\n", __func__); + /* Initialize rcv zero and xmt zero rings */ SXG_INITIALIZE_RING(adapter->RcvRingZeroInfo, SXG_RCV_RING_SIZE); SXG_INITIALIZE_RING(adapter->XmtRingZeroInfo, SXG_XMT_RING_SIZE); - // Sanity check receive data structure format + /* Sanity check receive data structure format */ ASSERT((adapter->ReceiveBufferSize == SXG_RCV_DATA_BUFFER_SIZE) || (adapter->ReceiveBufferSize == SXG_RCV_JUMBO_BUFFER_SIZE)); ASSERT(sizeof(SXG_RCV_DESCRIPTOR_BLOCK) == SXG_RCV_DESCRIPTOR_BLOCK_SIZE); - // Allocate receive data buffers. We allocate a block of buffers and - // a corresponding descriptor block at once. See sxghw.h:SXG_RCV_BLOCK + /* Allocate receive data buffers. We allocate a block of buffers and */ + /* a corresponding descriptor block at once. See sxghw.h:SXG_RCV_BLOCK */ for (i = 0; i < SXG_INITIAL_RCV_DATA_BUFFERS; i += SXG_RCV_DESCRIPTORS_PER_BLOCK) { sxg_allocate_buffer_memory(adapter, @@ -528,8 +529,8 @@ static int sxg_allocate_resources(p_adapter_t adapter) ReceiveBufferSize), SXG_BUFFER_TYPE_RCV); } - // NBL resource allocation can fail in the 'AllocateComplete' routine, which - // doesn't return status. Make sure we got the number of buffers we requested + /* NBL resource allocation can fail in the 'AllocateComplete' routine, which */ + /* doesn't return status. Make sure we got the number of buffers we requested */ if (adapter->FreeRcvBufferCount < SXG_INITIAL_RCV_DATA_BUFFERS) { SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "XAResF6", adapter, adapter->FreeRcvBufferCount, SXG_MAX_ENTRIES, @@ -537,17 +538,17 @@ static int sxg_allocate_resources(p_adapter_t adapter) return (STATUS_RESOURCES); } - DBG_ERROR("%s Allocate EventRings size[%lx]\n", __FUNCTION__, - (sizeof(SXG_EVENT_RING) * RssIds)); + DBG_ERROR("%s Allocate EventRings size[%x]\n", __func__, + (unsigned int)(sizeof(SXG_EVENT_RING) * RssIds)); - // Allocate event queues. + /* Allocate event queues. */ adapter->EventRings = pci_alloc_consistent(adapter->pcidev, sizeof(SXG_EVENT_RING) * RssIds, &adapter->PEventRings); if (!adapter->EventRings) { - // Caller will call SxgFreeAdapter to clean up above allocations + /* Caller will call SxgFreeAdapter to clean up above allocations */ SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "XAResF8", adapter, SXG_MAX_ENTRIES, 0, 0); status = STATUS_RESOURCES; @@ -555,12 +556,12 @@ static int sxg_allocate_resources(p_adapter_t adapter) } memset(adapter->EventRings, 0, sizeof(SXG_EVENT_RING) * RssIds); - DBG_ERROR("%s Allocate ISR size[%x]\n", __FUNCTION__, IsrCount); - // Allocate ISR + DBG_ERROR("%s Allocate ISR size[%x]\n", __func__, IsrCount); + /* Allocate ISR */ adapter->Isr = pci_alloc_consistent(adapter->pcidev, IsrCount, &adapter->PIsr); if (!adapter->Isr) { - // Caller will call SxgFreeAdapter to clean up above allocations + /* Caller will call SxgFreeAdapter to clean up above allocations */ SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "XAResF9", adapter, SXG_MAX_ENTRIES, 0, 0); status = STATUS_RESOURCES; @@ -568,10 +569,10 @@ static int sxg_allocate_resources(p_adapter_t adapter) } memset(adapter->Isr, 0, sizeof(u32) * IsrCount); - DBG_ERROR("%s Allocate shared XMT ring zero index location size[%lx]\n", - __FUNCTION__, sizeof(u32)); + DBG_ERROR("%s Allocate shared XMT ring zero index location size[%x]\n", + __func__, (unsigned int)sizeof(u32)); - // Allocate shared XMT ring zero index location + /* Allocate shared XMT ring zero index location */ adapter->XmtRingZeroIndex = pci_alloc_consistent(adapter->pcidev, sizeof(u32), &adapter-> @@ -587,7 +588,7 @@ static int sxg_allocate_resources(p_adapter_t adapter) SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "XAlcResS", adapter, SXG_MAX_ENTRIES, 0, 0); - DBG_ERROR("%s EXIT\n", __FUNCTION__); + DBG_ERROR("%s EXIT\n", __func__); return (STATUS_SUCCESS); } @@ -606,17 +607,17 @@ static void sxg_config_pci(struct pci_dev *pcidev) u16 new_command; pci_read_config_word(pcidev, PCI_COMMAND, &pci_command); - DBG_ERROR("sxg: %s PCI command[%4.4x]\n", __FUNCTION__, pci_command); - // Set the command register - new_command = pci_command | (PCI_COMMAND_MEMORY | // Memory Space Enable - PCI_COMMAND_MASTER | // Bus master enable - PCI_COMMAND_INVALIDATE | // Memory write and invalidate - PCI_COMMAND_PARITY | // Parity error response - PCI_COMMAND_SERR | // System ERR - PCI_COMMAND_FAST_BACK); // Fast back-to-back + DBG_ERROR("sxg: %s PCI command[%4.4x]\n", __func__, pci_command); + /* Set the command register */ + new_command = pci_command | (PCI_COMMAND_MEMORY | /* Memory Space Enable */ + PCI_COMMAND_MASTER | /* Bus master enable */ + PCI_COMMAND_INVALIDATE | /* Memory write and invalidate */ + PCI_COMMAND_PARITY | /* Parity error response */ + PCI_COMMAND_SERR | /* System ERR */ + PCI_COMMAND_FAST_BACK); /* Fast back-to-back */ if (pci_command != new_command) { DBG_ERROR("%s -- Updating PCI COMMAND register %4.4x->%4.4x.\n", - __FUNCTION__, pci_command, new_command); + __func__, pci_command, new_command); pci_write_config_word(pcidev, PCI_COMMAND, new_command); } } @@ -634,9 +635,9 @@ static int sxg_entry_probe(struct pci_dev *pcidev, ulong mmio_len = 0; DBG_ERROR("sxg: %s 2.6 VERSION ENTER jiffies[%lx] cpu %d\n", - __FUNCTION__, jiffies, smp_processor_id()); + __func__, jiffies, smp_processor_id()); - // Initialize trace buffer + /* Initialize trace buffer */ #ifdef ATKDBG SxgTraceBuffer = &LSxgTraceBuffer; SXG_TRACE_INIT(SxgTraceBuffer, TRACE_NOISY); @@ -701,11 +702,11 @@ static int sxg_entry_probe(struct pci_dev *pcidev, mmio_start, mmio_len); memmapped_ioaddr = ioremap(mmio_start, mmio_len); - DBG_ERROR("sxg: %s MEMMAPPED_IOADDR [%p]\n", __FUNCTION__, + DBG_ERROR("sxg: %s MEMMAPPED_IOADDR [%p]\n", __func__, memmapped_ioaddr); if (!memmapped_ioaddr) { DBG_ERROR("%s cannot remap MMIO region %lx @ %lx\n", - __FUNCTION__, mmio_len, mmio_start); + __func__, mmio_len, mmio_start); goto err_out_free_mmio_region; } @@ -727,7 +728,7 @@ static int sxg_entry_probe(struct pci_dev *pcidev, memmapped_ioaddr); if (!memmapped_ioaddr) { DBG_ERROR("%s cannot remap MMIO region %lx @ %lx\n", - __FUNCTION__, mmio_len, mmio_start); + __func__, mmio_len, mmio_start); goto err_out_free_mmio_region; } @@ -738,13 +739,13 @@ static int sxg_entry_probe(struct pci_dev *pcidev, adapter->UcodeRegs = (void *)memmapped_ioaddr; adapter->State = SXG_STATE_INITIALIZING; - // Maintain a list of all adapters anchored by - // the global SxgDriver structure. + /* Maintain a list of all adapters anchored by */ + /* the global SxgDriver structure. */ adapter->Next = SxgDriver.Adapters; SxgDriver.Adapters = adapter; adapter->AdapterID = ++SxgDriver.AdapterID; - // Initialize CRC table used to determine multicast hash + /* Initialize CRC table used to determine multicast hash */ sxg_mcast_init_crc32(); adapter->JumboEnabled = FALSE; @@ -757,18 +758,18 @@ static int sxg_entry_probe(struct pci_dev *pcidev, adapter->ReceiveBufferSize = SXG_RCV_DATA_BUFFER_SIZE; } -// status = SXG_READ_EEPROM(adapter); -// if (!status) { -// goto sxg_init_bad; -// } +/* status = SXG_READ_EEPROM(adapter); */ +/* if (!status) { */ +/* goto sxg_init_bad; */ +/* } */ - DBG_ERROR("sxg: %s ENTER sxg_config_pci\n", __FUNCTION__); + DBG_ERROR("sxg: %s ENTER sxg_config_pci\n", __func__); sxg_config_pci(pcidev); - DBG_ERROR("sxg: %s EXIT sxg_config_pci\n", __FUNCTION__); + DBG_ERROR("sxg: %s EXIT sxg_config_pci\n", __func__); - DBG_ERROR("sxg: %s ENTER sxg_init_driver\n", __FUNCTION__); + DBG_ERROR("sxg: %s ENTER sxg_init_driver\n", __func__); sxg_init_driver(); - DBG_ERROR("sxg: %s EXIT sxg_init_driver\n", __FUNCTION__); + DBG_ERROR("sxg: %s EXIT sxg_init_driver\n", __func__); adapter->vendid = pci_tbl_entry->vendor; adapter->devid = pci_tbl_entry->device; @@ -780,23 +781,23 @@ static int sxg_entry_probe(struct pci_dev *pcidev, adapter->irq = pcidev->irq; adapter->next_netdevice = head_netdevice; head_netdevice = netdev; -// adapter->chipid = chip_idx; - adapter->port = 0; //adapter->functionnumber; +/* adapter->chipid = chip_idx; */ + adapter->port = 0; /*adapter->functionnumber; */ adapter->cardindex = adapter->port; - // Allocate memory and other resources - DBG_ERROR("sxg: %s ENTER sxg_allocate_resources\n", __FUNCTION__); + /* Allocate memory and other resources */ + DBG_ERROR("sxg: %s ENTER sxg_allocate_resources\n", __func__); status = sxg_allocate_resources(adapter); DBG_ERROR("sxg: %s EXIT sxg_allocate_resources status %x\n", - __FUNCTION__, status); + __func__, status); if (status != STATUS_SUCCESS) { goto err_out_unmap; } - DBG_ERROR("sxg: %s ENTER sxg_download_microcode\n", __FUNCTION__); + DBG_ERROR("sxg: %s ENTER sxg_download_microcode\n", __func__); if (sxg_download_microcode(adapter, SXG_UCODE_SAHARA)) { DBG_ERROR("sxg: %s ENTER sxg_adapter_set_hwaddr\n", - __FUNCTION__); + __func__); sxg_adapter_set_hwaddr(adapter); } else { adapter->state = ADAPT_FAIL; @@ -819,7 +820,7 @@ static int sxg_entry_probe(struct pci_dev *pcidev, #endif strcpy(netdev->name, "eth%d"); -// strcpy(netdev->name, pci_name(pcidev)); +/* strcpy(netdev->name, pci_name(pcidev)); */ if ((err = register_netdev(netdev))) { DBG_ERROR("Cannot register net device, aborting. %s\n", netdev->name); @@ -832,11 +833,11 @@ static int sxg_entry_probe(struct pci_dev *pcidev, netdev->dev_addr[1], netdev->dev_addr[2], netdev->dev_addr[3], netdev->dev_addr[4], netdev->dev_addr[5]); -//sxg_init_bad: +/*sxg_init_bad: */ ASSERT(status == FALSE); -// sxg_free_adapter(adapter); +/* sxg_free_adapter(adapter); */ - DBG_ERROR("sxg: %s EXIT status[%x] jiffies[%lx] cpu %d\n", __FUNCTION__, + DBG_ERROR("sxg: %s EXIT status[%x] jiffies[%lx] cpu %d\n", __func__, status, jiffies, smp_processor_id()); return status; @@ -848,7 +849,7 @@ static int sxg_entry_probe(struct pci_dev *pcidev, err_out_exit_sxg_probe: - DBG_ERROR("%s EXIT jiffies[%lx] cpu %d\n", __FUNCTION__, jiffies, + DBG_ERROR("%s EXIT jiffies[%lx] cpu %d\n", __func__, jiffies, smp_processor_id()); return -ENODEV; @@ -874,12 +875,12 @@ static void sxg_disable_interrupt(p_adapter_t adapter) { SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "DisIntr", adapter, adapter->InterruptsEnabled, 0, 0); - // For now, RSS is disabled with line based interrupts + /* For now, RSS is disabled with line based interrupts */ ASSERT(adapter->RssEnabled == FALSE); ASSERT(adapter->MsiEnabled == FALSE); - // - // Turn off interrupts by writing to the icr register. - // + /* */ + /* Turn off interrupts by writing to the icr register. */ + /* */ WRITE_REG(adapter->UcodeRegs[0].Icr, SXG_ICR(0, SXG_ICR_DISABLE), TRUE); adapter->InterruptsEnabled = 0; @@ -905,12 +906,12 @@ static void sxg_enable_interrupt(p_adapter_t adapter) { SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "EnIntr", adapter, adapter->InterruptsEnabled, 0, 0); - // For now, RSS is disabled with line based interrupts + /* For now, RSS is disabled with line based interrupts */ ASSERT(adapter->RssEnabled == FALSE); ASSERT(adapter->MsiEnabled == FALSE); - // - // Turn on interrupts by writing to the icr register. - // + /* */ + /* Turn on interrupts by writing to the icr register. */ + /* */ WRITE_REG(adapter->UcodeRegs[0].Icr, SXG_ICR(0, SXG_ICR_ENABLE), TRUE); adapter->InterruptsEnabled = 1; @@ -935,29 +936,29 @@ static irqreturn_t sxg_isr(int irq, void *dev_id) { p_net_device dev = (p_net_device) dev_id; p_adapter_t adapter = (p_adapter_t) netdev_priv(dev); -// u32 CpuMask = 0, i; +/* u32 CpuMask = 0, i; */ adapter->Stats.NumInts++; if (adapter->Isr[0] == 0) { - // The SLIC driver used to experience a number of spurious interrupts - // due to the delay associated with the masking of the interrupt - // (we'd bounce back in here). If we see that again with Sahara, - // add a READ_REG of the Icr register after the WRITE_REG below. + /* The SLIC driver used to experience a number of spurious interrupts */ + /* due to the delay associated with the masking of the interrupt */ + /* (we'd bounce back in here). If we see that again with Sahara, */ + /* add a READ_REG of the Icr register after the WRITE_REG below. */ adapter->Stats.FalseInts++; return IRQ_NONE; } - // - // Move the Isr contents and clear the value in - // shared memory, and mask interrupts - // + /* */ + /* Move the Isr contents and clear the value in */ + /* shared memory, and mask interrupts */ + /* */ adapter->IsrCopy[0] = adapter->Isr[0]; adapter->Isr[0] = 0; WRITE_REG(adapter->UcodeRegs[0].Icr, SXG_ICR(0, SXG_ICR_MASK), TRUE); -// ASSERT(adapter->IsrDpcsPending == 0); -#if XXXTODO // RSS Stuff - // If RSS is enabled and the ISR specifies - // SXG_ISR_EVENT, then schedule DPC's - // based on event queues. +/* ASSERT(adapter->IsrDpcsPending == 0); */ +#if XXXTODO /* RSS Stuff */ + /* If RSS is enabled and the ISR specifies */ + /* SXG_ISR_EVENT, then schedule DPC's */ + /* based on event queues. */ if (adapter->RssEnabled && (adapter->IsrCopy[0] & SXG_ISR_EVENT)) { for (i = 0; i < adapter->RssSystemInfo->ProcessorInfo.RssCpuCount; @@ -973,8 +974,8 @@ static irqreturn_t sxg_isr(int irq, void *dev_id) } } } - // Now, either schedule the CPUs specified by the CpuMask, - // or queue default + /* Now, either schedule the CPUs specified by the CpuMask, */ + /* or queue default */ if (CpuMask) { *QueueDefault = FALSE; } else { @@ -983,9 +984,9 @@ static irqreturn_t sxg_isr(int irq, void *dev_id) } *TargetCpus = CpuMask; #endif - // - // There are no DPCs in Linux, so call the handler now - // + /* */ + /* There are no DPCs in Linux, so call the handler now */ + /* */ sxg_handle_interrupt(adapter); return IRQ_HANDLED; @@ -993,7 +994,7 @@ static irqreturn_t sxg_isr(int irq, void *dev_id) static void sxg_handle_interrupt(p_adapter_t adapter) { -// unsigned char RssId = 0; +/* unsigned char RssId = 0; */ u32 NewIsr; if (adapter->Stats.RcvNoBuffer < 5) { @@ -1002,32 +1003,32 @@ static void sxg_handle_interrupt(p_adapter_t adapter) } SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "HndlIntr", adapter, adapter->IsrCopy[0], 0, 0); - // For now, RSS is disabled with line based interrupts + /* For now, RSS is disabled with line based interrupts */ ASSERT(adapter->RssEnabled == FALSE); ASSERT(adapter->MsiEnabled == FALSE); ASSERT(adapter->IsrCopy[0]); -///////////////////////////// +/*/////////////////////////// */ - // Always process the event queue. + /* Always process the event queue. */ sxg_process_event_queue(adapter, (adapter->RssEnabled ? /*RssId */ 0 : 0)); -#if XXXTODO // RSS stuff +#if XXXTODO /* RSS stuff */ if (--adapter->IsrDpcsPending) { - // We're done. + /* We're done. */ ASSERT(adapter->RssEnabled); SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "DPCsPend", adapter, 0, 0, 0); return; } #endif - // - // Last (or only) DPC processes the ISR and clears the interrupt. - // + /* */ + /* Last (or only) DPC processes the ISR and clears the interrupt. */ + /* */ NewIsr = sxg_process_isr(adapter, 0); - // - // Reenable interrupts - // + /* */ + /* Reenable interrupts */ + /* */ adapter->IsrCopy[0] = 0; SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "ClearIsr", adapter, NewIsr, 0, 0); @@ -1063,75 +1064,75 @@ static int sxg_process_isr(p_adapter_t adapter, u32 MessageId) SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "ProcIsr", adapter, Isr, 0, 0); - // Error + /* Error */ if (Isr & SXG_ISR_ERR) { if (Isr & SXG_ISR_PDQF) { adapter->Stats.PdqFull++; - DBG_ERROR("%s: SXG_ISR_ERR PDQF!!\n", __FUNCTION__); + DBG_ERROR("%s: SXG_ISR_ERR PDQF!!\n", __func__); } - // No host buffer + /* No host buffer */ if (Isr & SXG_ISR_RMISS) { - // There is a bunch of code in the SLIC driver which - // attempts to process more receive events per DPC - // if we start to fall behind. We'll probably - // need to do something similar here, but hold - // off for now. I don't want to make the code more - // complicated than strictly needed. + /* There is a bunch of code in the SLIC driver which */ + /* attempts to process more receive events per DPC */ + /* if we start to fall behind. We'll probably */ + /* need to do something similar here, but hold */ + /* off for now. I don't want to make the code more */ + /* complicated than strictly needed. */ adapter->Stats.RcvNoBuffer++; if (adapter->Stats.RcvNoBuffer < 5) { DBG_ERROR("%s: SXG_ISR_ERR RMISS!!\n", - __FUNCTION__); + __func__); } } - // Card crash + /* Card crash */ if (Isr & SXG_ISR_DEAD) { - // Set aside the crash info and set the adapter state to RESET + /* Set aside the crash info and set the adapter state to RESET */ adapter->CrashCpu = (unsigned char)((Isr & SXG_ISR_CPU) >> SXG_ISR_CPU_SHIFT); adapter->CrashLocation = (ushort) (Isr & SXG_ISR_CRASH); adapter->Dead = TRUE; - DBG_ERROR("%s: ISR_DEAD %x, CPU: %d\n", __FUNCTION__, + DBG_ERROR("%s: ISR_DEAD %x, CPU: %d\n", __func__, adapter->CrashLocation, adapter->CrashCpu); } - // Event ring full + /* Event ring full */ if (Isr & SXG_ISR_ERFULL) { - // Same issue as RMISS, really. This means the - // host is falling behind the card. Need to increase - // event ring size, process more events per interrupt, - // and/or reduce/remove interrupt aggregation. + /* Same issue as RMISS, really. This means the */ + /* host is falling behind the card. Need to increase */ + /* event ring size, process more events per interrupt, */ + /* and/or reduce/remove interrupt aggregation. */ adapter->Stats.EventRingFull++; DBG_ERROR("%s: SXG_ISR_ERR EVENT RING FULL!!\n", - __FUNCTION__); + __func__); } - // Transmit drop - no DRAM buffers or XMT error + /* Transmit drop - no DRAM buffers or XMT error */ if (Isr & SXG_ISR_XDROP) { adapter->Stats.XmtDrops++; adapter->Stats.XmtErrors++; - DBG_ERROR("%s: SXG_ISR_ERR XDROP!!\n", __FUNCTION__); + DBG_ERROR("%s: SXG_ISR_ERR XDROP!!\n", __func__); } } - // Slowpath send completions + /* Slowpath send completions */ if (Isr & SXG_ISR_SPSEND) { sxg_complete_slow_send(adapter); } - // Dump + /* Dump */ if (Isr & SXG_ISR_UPC) { - ASSERT(adapter->DumpCmdRunning); // Maybe change when debug is added.. + ASSERT(adapter->DumpCmdRunning); /* Maybe change when debug is added.. */ adapter->DumpCmdRunning = FALSE; } - // Link event + /* Link event */ if (Isr & SXG_ISR_LINK) { sxg_link_event(adapter); } - // Debug - breakpoint hit + /* Debug - breakpoint hit */ if (Isr & SXG_ISR_BREAK) { - // At the moment AGDB isn't written to support interactive - // debug sessions. When it is, this interrupt will be used - // to signal AGDB that it has hit a breakpoint. For now, ASSERT. + /* At the moment AGDB isn't written to support interactive */ + /* debug sessions. When it is, this interrupt will be used */ + /* to signal AGDB that it has hit a breakpoint. For now, ASSERT. */ ASSERT(0); } - // Heartbeat response + /* Heartbeat response */ if (Isr & SXG_ISR_PING) { adapter->PingOutstanding = FALSE; } @@ -1171,39 +1172,39 @@ static u32 sxg_process_event_queue(p_adapter_t adapter, u32 RssId) (adapter->State == SXG_STATE_PAUSING) || (adapter->State == SXG_STATE_PAUSED) || (adapter->State == SXG_STATE_HALTING)); - // We may still have unprocessed events on the queue if - // the card crashed. Don't process them. + /* We may still have unprocessed events on the queue if */ + /* the card crashed. Don't process them. */ if (adapter->Dead) { return (0); } - // In theory there should only be a single processor that - // accesses this queue, and only at interrupt-DPC time. So - // we shouldn't need a lock for any of this. + /* In theory there should only be a single processor that */ + /* accesses this queue, and only at interrupt-DPC time. So */ + /* we shouldn't need a lock for any of this. */ while (Event->Status & EVENT_STATUS_VALID) { SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "Event", Event, Event->Code, Event->Status, adapter->NextEvent); switch (Event->Code) { case EVENT_CODE_BUFFERS: - ASSERT(!(Event->CommandIndex & 0xFF00)); // SXG_RING_INFO Head & Tail == unsigned char - // + ASSERT(!(Event->CommandIndex & 0xFF00)); /* SXG_RING_INFO Head & Tail == unsigned char */ + /* */ sxg_complete_descriptor_blocks(adapter, Event->CommandIndex); - // + /* */ break; case EVENT_CODE_SLOWRCV: --adapter->RcvBuffersOnCard; if ((skb = sxg_slow_receive(adapter, Event))) { u32 rx_bytes; #ifdef LINUX_HANDLES_RCV_INDICATION_LISTS - // Add it to our indication list + /* Add it to our indication list */ SXG_ADD_RCV_PACKET(adapter, skb, prev_skb, IndicationList, num_skbs); - // In Linux, we just pass up each skb to the protocol above at this point, - // there is no capability of an indication list. + /* In Linux, we just pass up each skb to the protocol above at this point, */ + /* there is no capability of an indication list. */ #else -// CHECK skb_pull(skb, INIC_RCVBUF_HEADSIZE); - rx_bytes = Event->Length; // (rcvbuf->length & IRHDDR_FLEN_MSK); +/* CHECK skb_pull(skb, INIC_RCVBUF_HEADSIZE); */ + rx_bytes = Event->Length; /* (rcvbuf->length & IRHDDR_FLEN_MSK); */ skb_put(skb, rx_bytes); adapter->stats.rx_packets++; adapter->stats.rx_bytes += rx_bytes; @@ -1218,43 +1219,43 @@ static u32 sxg_process_event_queue(p_adapter_t adapter, u32 RssId) break; default: DBG_ERROR("%s: ERROR Invalid EventCode %d\n", - __FUNCTION__, Event->Code); -// ASSERT(0); + __func__, Event->Code); +/* ASSERT(0); */ } - // See if we need to restock card receive buffers. - // There are two things to note here: - // First - This test is not SMP safe. The - // adapter->BuffersOnCard field is protected via atomic interlocked calls, but - // we do not protect it with respect to these tests. The only way to do that - // is with a lock, and I don't want to grab a lock every time we adjust the - // BuffersOnCard count. Instead, we allow the buffer replenishment to be off - // once in a while. The worst that can happen is the card is given one - // more-or-less descriptor block than the arbitrary value we've chosen. - // No big deal - // In short DO NOT ADD A LOCK HERE, OR WHERE RcvBuffersOnCard is adjusted. - // Second - We expect this test to rarely evaluate to true. We attempt to - // refill descriptor blocks as they are returned to us - // (sxg_complete_descriptor_blocks), so The only time this should evaluate - // to true is when sxg_complete_descriptor_blocks failed to allocate - // receive buffers. + /* See if we need to restock card receive buffers. */ + /* There are two things to note here: */ + /* First - This test is not SMP safe. The */ + /* adapter->BuffersOnCard field is protected via atomic interlocked calls, but */ + /* we do not protect it with respect to these tests. The only way to do that */ + /* is with a lock, and I don't want to grab a lock every time we adjust the */ + /* BuffersOnCard count. Instead, we allow the buffer replenishment to be off */ + /* once in a while. The worst that can happen is the card is given one */ + /* more-or-less descriptor block than the arbitrary value we've chosen. */ + /* No big deal */ + /* In short DO NOT ADD A LOCK HERE, OR WHERE RcvBuffersOnCard is adjusted. */ + /* Second - We expect this test to rarely evaluate to true. We attempt to */ + /* refill descriptor blocks as they are returned to us */ + /* (sxg_complete_descriptor_blocks), so The only time this should evaluate */ + /* to true is when sxg_complete_descriptor_blocks failed to allocate */ + /* receive buffers. */ if (adapter->RcvBuffersOnCard < SXG_RCV_DATA_BUFFERS) { sxg_stock_rcv_buffers(adapter); } - // It's more efficient to just set this to zero. - // But clearing the top bit saves potential debug info... + /* It's more efficient to just set this to zero. */ + /* But clearing the top bit saves potential debug info... */ Event->Status &= ~EVENT_STATUS_VALID; - // Advanct to the next event + /* Advanct to the next event */ SXG_ADVANCE_INDEX(adapter->NextEvent[RssId], EVENT_RING_SIZE); Event = &EventRing->Ring[adapter->NextEvent[RssId]]; EventsProcessed++; if (EventsProcessed == EVENT_RING_BATCH) { - // Release a batch of events back to the card + /* Release a batch of events back to the card */ WRITE_REG(adapter->UcodeRegs[RssId].EventRelease, EVENT_RING_BATCH, FALSE); EventsProcessed = 0; - // If we've processed our batch limit, break out of the - // loop and return SXG_ISR_EVENT to arrange for us to - // be called again + /* If we've processed our batch limit, break out of the */ + /* loop and return SXG_ISR_EVENT to arrange for us to */ + /* be called again */ if (Batches++ == EVENT_BATCH_LIMIT) { SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "EvtLimit", Batches, @@ -1265,14 +1266,14 @@ static u32 sxg_process_event_queue(p_adapter_t adapter, u32 RssId) } } #ifdef LINUX_HANDLES_RCV_INDICATION_LISTS - // - // Indicate any received dumb-nic frames - // + /* */ + /* Indicate any received dumb-nic frames */ + /* */ SXG_INDICATE_PACKETS(adapter, IndicationList, num_skbs); #endif - // - // Release events back to the card. - // + /* */ + /* Release events back to the card. */ + /* */ if (EventsProcessed) { WRITE_REG(adapter->UcodeRegs[RssId].EventRelease, EventsProcessed, FALSE); @@ -1299,43 +1300,43 @@ static void sxg_complete_slow_send(p_adapter_t adapter) u32 *ContextType; PSXG_CMD XmtCmd; - // NOTE - This lock is dropped and regrabbed in this loop. - // This means two different processors can both be running - // through this loop. Be *very* careful. + /* NOTE - This lock is dropped and regrabbed in this loop. */ + /* This means two different processors can both be running */ + /* through this loop. Be *very* careful. */ spin_lock(&adapter->XmtZeroLock); SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "CmpSnds", adapter, XmtRingInfo->Head, XmtRingInfo->Tail, 0); while (XmtRingInfo->Tail != *adapter->XmtRingZeroIndex) { - // Locate the current Cmd (ring descriptor entry), and - // associated SGL, and advance the tail + /* Locate the current Cmd (ring descriptor entry), and */ + /* associated SGL, and advance the tail */ SXG_RETURN_CMD(XmtRing, XmtRingInfo, XmtCmd, ContextType); ASSERT(ContextType); SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "CmpSnd", XmtRingInfo->Head, XmtRingInfo->Tail, XmtCmd, 0); - // Clear the SGL field. + /* Clear the SGL field. */ XmtCmd->Sgl = 0; switch (*ContextType) { case SXG_SGL_DUMB: { struct sk_buff *skb; - // Dumb-nic send. Command context is the dumb-nic SGL + /* Dumb-nic send. Command context is the dumb-nic SGL */ skb = (struct sk_buff *)ContextType; - // Complete the send + /* Complete the send */ SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_IMPORTANT, "DmSndCmp", skb, 0, 0, 0); ASSERT(adapter->Stats.XmtQLen); - adapter->Stats.XmtQLen--; // within XmtZeroLock + adapter->Stats.XmtQLen--; /* within XmtZeroLock */ adapter->Stats.XmtOk++; - // Now drop the lock and complete the send back to - // Microsoft. We need to drop the lock because - // Microsoft can come back with a chimney send, which - // results in a double trip in SxgTcpOuput + /* Now drop the lock and complete the send back to */ + /* Microsoft. We need to drop the lock because */ + /* Microsoft can come back with a chimney send, which */ + /* results in a double trip in SxgTcpOuput */ spin_unlock(&adapter->XmtZeroLock); SXG_COMPLETE_DUMB_SEND(adapter, skb); - // and reacquire.. + /* and reacquire.. */ spin_lock(&adapter->XmtZeroLock); } break; @@ -1371,7 +1372,7 @@ static struct sk_buff *sxg_slow_receive(p_adapter_t adapter, PSXG_EVENT Event) SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_IMPORTANT, "SlowRcv", Event, RcvDataBufferHdr, RcvDataBufferHdr->State, RcvDataBufferHdr->VirtualAddress); - // Drop rcv frames in non-running state + /* Drop rcv frames in non-running state */ switch (adapter->State) { case SXG_STATE_RUNNING: break; @@ -1384,12 +1385,12 @@ static struct sk_buff *sxg_slow_receive(p_adapter_t adapter, PSXG_EVENT Event) goto drop; } - // Change buffer state to UPSTREAM + /* Change buffer state to UPSTREAM */ RcvDataBufferHdr->State = SXG_BUFFER_UPSTREAM; if (Event->Status & EVENT_STATUS_RCVERR) { SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "RcvError", Event, Event->Status, Event->HostHandle, 0); - // XXXTODO - Remove this print later + /* XXXTODO - Remove this print later */ DBG_ERROR("SXG: Receive error %x\n", *(u32 *) SXG_RECEIVE_DATA_LOCATION(RcvDataBufferHdr)); sxg_process_rcv_error(adapter, *(u32 *) @@ -1397,8 +1398,8 @@ static struct sk_buff *sxg_slow_receive(p_adapter_t adapter, PSXG_EVENT Event) (RcvDataBufferHdr)); goto drop; } -#if XXXTODO // VLAN stuff - // If there's a VLAN tag, extract it and validate it +#if XXXTODO /* VLAN stuff */ + /* If there's a VLAN tag, extract it and validate it */ if (((p_ether_header) (SXG_RECEIVE_DATA_LOCATION(RcvDataBufferHdr)))-> EtherType == ETHERTYPE_VLAN) { if (SxgExtractVlanHeader(adapter, RcvDataBufferHdr, Event) != @@ -1411,9 +1412,9 @@ static struct sk_buff *sxg_slow_receive(p_adapter_t adapter, PSXG_EVENT Event) } } #endif - // - // Dumb-nic frame. See if it passes our mac filter and update stats - // + /* */ + /* Dumb-nic frame. See if it passes our mac filter and update stats */ + /* */ if (!sxg_mac_filter(adapter, (p_ether_header) SXG_RECEIVE_DATA_LOCATION(RcvDataBufferHdr), Event->Length)) { @@ -1427,9 +1428,9 @@ static struct sk_buff *sxg_slow_receive(p_adapter_t adapter, PSXG_EVENT Event) SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_IMPORTANT, "DumbRcv", RcvDataBufferHdr, Packet, Event->Length, 0); - // - // Lastly adjust the receive packet length. - // + /* */ + /* Lastly adjust the receive packet length. */ + /* */ SXG_ADJUST_RCV_PACKET(Packet, RcvDataBufferHdr, Event); return (Packet); @@ -1541,7 +1542,7 @@ static bool sxg_mac_filter(p_adapter_t adapter, p_ether_header EtherHdr, if (SXG_MULTICAST_PACKET(EtherHdr)) { if (SXG_BROADCAST_PACKET(EtherHdr)) { - // broadcast + /* broadcast */ if (adapter->MacFilter & MAC_BCAST) { adapter->Stats.DumbRcvBcastPkts++; adapter->Stats.DumbRcvBcastBytes += length; @@ -1550,7 +1551,7 @@ static bool sxg_mac_filter(p_adapter_t adapter, p_ether_header EtherHdr, return (TRUE); } } else { - // multicast + /* multicast */ if (adapter->MacFilter & MAC_ALLMCAST) { adapter->Stats.DumbRcvMcastPkts++; adapter->Stats.DumbRcvMcastBytes += length; @@ -1580,9 +1581,9 @@ static bool sxg_mac_filter(p_adapter_t adapter, p_ether_header EtherHdr, } } } else if (adapter->MacFilter & MAC_DIRECTED) { - // Not broadcast or multicast. Must be directed at us or - // the card is in promiscuous mode. Either way, consider it - // ours if MAC_DIRECTED is set + /* Not broadcast or multicast. Must be directed at us or */ + /* the card is in promiscuous mode. Either way, consider it */ + /* ours if MAC_DIRECTED is set */ adapter->Stats.DumbRcvUcastPkts++; adapter->Stats.DumbRcvUcastBytes += length; adapter->Stats.DumbRcvPkts++; @@ -1590,7 +1591,7 @@ static bool sxg_mac_filter(p_adapter_t adapter, p_ether_header EtherHdr, return (TRUE); } if (adapter->MacFilter & MAC_PROMISC) { - // Whatever it is, keep it. + /* Whatever it is, keep it. */ adapter->Stats.DumbRcvPkts++; adapter->Stats.DumbRcvBytes += length; return (TRUE); @@ -1606,7 +1607,7 @@ static int sxg_register_interrupt(p_adapter_t adapter) DBG_ERROR ("sxg: %s AllocAdaptRsrcs adapter[%p] dev->irq[%x] %x\n", - __FUNCTION__, adapter, adapter->netdev->irq, NR_IRQS); + __func__, adapter, adapter->netdev->irq, NR_IRQS); spin_unlock_irqrestore(&sxg_global.driver_lock, sxg_global.flags); @@ -1625,18 +1626,18 @@ static int sxg_register_interrupt(p_adapter_t adapter) } adapter->intrregistered = 1; adapter->IntRegistered = TRUE; - // Disable RSS with line-based interrupts + /* Disable RSS with line-based interrupts */ adapter->MsiEnabled = FALSE; adapter->RssEnabled = FALSE; DBG_ERROR("sxg: %s AllocAdaptRsrcs adapter[%p] dev->irq[%x]\n", - __FUNCTION__, adapter, adapter->netdev->irq); + __func__, adapter, adapter->netdev->irq); } return (STATUS_SUCCESS); } static void sxg_deregister_interrupt(p_adapter_t adapter) { - DBG_ERROR("sxg: %s ENTER adapter[%p]\n", __FUNCTION__, adapter); + DBG_ERROR("sxg: %s ENTER adapter[%p]\n", __func__, adapter); #if XXXTODO slic_init_cleanup(adapter); #endif @@ -1651,7 +1652,7 @@ static void sxg_deregister_interrupt(p_adapter_t adapter) adapter->rcv_broadcasts = 0; adapter->rcv_multicasts = 0; adapter->rcv_unicasts = 0; - DBG_ERROR("sxg: %s EXIT\n", __FUNCTION__); + DBG_ERROR("sxg: %s EXIT\n", __func__); } /* @@ -1666,7 +1667,7 @@ static int sxg_if_init(p_adapter_t adapter) int status = 0; DBG_ERROR("sxg: %s (%s) ENTER states[%d:%d:%d] flags[%x]\n", - __FUNCTION__, adapter->netdev->name, + __func__, adapter->netdev->name, adapter->queues_initialized, adapter->state, adapter->linkstate, dev->flags); @@ -1680,7 +1681,7 @@ static int sxg_if_init(p_adapter_t adapter) adapter->devflags_prev = dev->flags; adapter->macopts = MAC_DIRECTED; if (dev->flags) { - DBG_ERROR("sxg: %s (%s) Set MAC options: ", __FUNCTION__, + DBG_ERROR("sxg: %s (%s) Set MAC options: ", __func__, adapter->netdev->name); if (dev->flags & IFF_BROADCAST) { adapter->macopts |= MAC_BCAST; @@ -1713,7 +1714,7 @@ static int sxg_if_init(p_adapter_t adapter) /* * clear any pending events, then enable interrupts */ - DBG_ERROR("sxg: %s ENABLE interrupts(slic)\n", __FUNCTION__); + DBG_ERROR("sxg: %s ENABLE interrupts(slic)\n", __func__); return (STATUS_SUCCESS); } @@ -1724,11 +1725,11 @@ static int sxg_entry_open(p_net_device dev) int status; ASSERT(adapter); - DBG_ERROR("sxg: %s adapter->activated[%d]\n", __FUNCTION__, + DBG_ERROR("sxg: %s adapter->activated[%d]\n", __func__, adapter->activated); DBG_ERROR ("sxg: %s (%s): [jiffies[%lx] cpu %d] dev[%p] adapt[%p] port[%d]\n", - __FUNCTION__, adapter->netdev->name, jiffies, smp_processor_id(), + __func__, adapter->netdev->name, jiffies, smp_processor_id(), adapter->netdev, adapter, adapter->port); netif_stop_queue(adapter->netdev); @@ -1738,16 +1739,16 @@ static int sxg_entry_open(p_net_device dev) sxg_global.num_sxg_ports_active++; adapter->activated = 1; } - // Initialize the adapter - DBG_ERROR("sxg: %s ENTER sxg_initialize_adapter\n", __FUNCTION__); + /* Initialize the adapter */ + DBG_ERROR("sxg: %s ENTER sxg_initialize_adapter\n", __func__); status = sxg_initialize_adapter(adapter); DBG_ERROR("sxg: %s EXIT sxg_initialize_adapter status[%x]\n", - __FUNCTION__, status); + __func__, status); if (status == STATUS_SUCCESS) { - DBG_ERROR("sxg: %s ENTER sxg_if_init\n", __FUNCTION__); + DBG_ERROR("sxg: %s ENTER sxg_if_init\n", __func__); status = sxg_if_init(adapter); - DBG_ERROR("sxg: %s EXIT sxg_if_init status[%x]\n", __FUNCTION__, + DBG_ERROR("sxg: %s EXIT sxg_if_init status[%x]\n", __func__, status); } @@ -1760,12 +1761,12 @@ static int sxg_entry_open(p_net_device dev) sxg_global.flags); return (status); } - DBG_ERROR("sxg: %s ENABLE ALL INTERRUPTS\n", __FUNCTION__); + DBG_ERROR("sxg: %s ENABLE ALL INTERRUPTS\n", __func__); - // Enable interrupts + /* Enable interrupts */ SXG_ENABLE_ALL_INTERRUPTS(adapter); - DBG_ERROR("sxg: %s EXIT\n", __FUNCTION__); + DBG_ERROR("sxg: %s EXIT\n", __func__); spin_unlock_irqrestore(&sxg_global.driver_lock, sxg_global.flags); return STATUS_SUCCESS; @@ -1779,27 +1780,27 @@ static void __devexit sxg_entry_remove(struct pci_dev *pcidev) p_adapter_t adapter = (p_adapter_t) netdev_priv(dev); ASSERT(adapter); - DBG_ERROR("sxg: %s ENTER dev[%p] adapter[%p]\n", __FUNCTION__, dev, + DBG_ERROR("sxg: %s ENTER dev[%p] adapter[%p]\n", __func__, dev, adapter); sxg_deregister_interrupt(adapter); sxg_unmap_mmio_space(adapter); - DBG_ERROR("sxg: %s unregister_netdev\n", __FUNCTION__); + DBG_ERROR("sxg: %s unregister_netdev\n", __func__); unregister_netdev(dev); mmio_start = pci_resource_start(pcidev, 0); mmio_len = pci_resource_len(pcidev, 0); - DBG_ERROR("sxg: %s rel_region(0) start[%x] len[%x]\n", __FUNCTION__, + DBG_ERROR("sxg: %s rel_region(0) start[%x] len[%x]\n", __func__, mmio_start, mmio_len); release_mem_region(mmio_start, mmio_len); - DBG_ERROR("sxg: %s iounmap dev->base_addr[%x]\n", __FUNCTION__, + DBG_ERROR("sxg: %s iounmap dev->base_addr[%x]\n", __func__, (unsigned int)dev->base_addr); iounmap((char *)dev->base_addr); - DBG_ERROR("sxg: %s deallocate device\n", __FUNCTION__); + DBG_ERROR("sxg: %s deallocate device\n", __func__); kfree(dev); - DBG_ERROR("sxg: %s EXIT\n", __FUNCTION__); + DBG_ERROR("sxg: %s EXIT\n", __func__); } static int sxg_entry_halt(p_net_device dev) @@ -1807,17 +1808,17 @@ static int sxg_entry_halt(p_net_device dev) p_adapter_t adapter = (p_adapter_t) netdev_priv(dev); spin_lock_irqsave(&sxg_global.driver_lock, sxg_global.flags); - DBG_ERROR("sxg: %s (%s) ENTER\n", __FUNCTION__, dev->name); + DBG_ERROR("sxg: %s (%s) ENTER\n", __func__, dev->name); netif_stop_queue(adapter->netdev); adapter->state = ADAPT_DOWN; adapter->linkstate = LINK_DOWN; adapter->devflags_prev = 0; DBG_ERROR("sxg: %s (%s) set adapter[%p] state to ADAPT_DOWN(%d)\n", - __FUNCTION__, dev->name, adapter, adapter->state); + __func__, dev->name, adapter, adapter->state); - DBG_ERROR("sxg: %s (%s) EXIT\n", __FUNCTION__, dev->name); - DBG_ERROR("sxg: %s EXIT\n", __FUNCTION__); + DBG_ERROR("sxg: %s (%s) EXIT\n", __func__, dev->name); + DBG_ERROR("sxg: %s EXIT\n", __func__); spin_unlock_irqrestore(&sxg_global.driver_lock, sxg_global.flags); return (STATUS_SUCCESS); } @@ -1825,11 +1826,11 @@ static int sxg_entry_halt(p_net_device dev) static int sxg_ioctl(p_net_device dev, struct ifreq *rq, int cmd) { ASSERT(rq); -// DBG_ERROR("sxg: %s cmd[%x] rq[%p] dev[%p]\n", __FUNCTION__, cmd, rq, dev); +/* DBG_ERROR("sxg: %s cmd[%x] rq[%p] dev[%p]\n", __func__, cmd, rq, dev); */ switch (cmd) { case SIOCSLICSETINTAGG: { -// p_adapter_t adapter = (p_adapter_t) netdev_priv(dev); +/* p_adapter_t adapter = (p_adapter_t) netdev_priv(dev); */ u32 data[7]; u32 intagg; @@ -1841,12 +1842,12 @@ static int sxg_ioctl(p_net_device dev, struct ifreq *rq, int cmd) intagg = data[0]; printk(KERN_EMERG "%s: set interrupt aggregation to %d\n", - __FUNCTION__, intagg); + __func__, intagg); return 0; } default: -// DBG_ERROR("sxg: %s UNSUPPORTED[%x]\n", __FUNCTION__, cmd); +/* DBG_ERROR("sxg: %s UNSUPPORTED[%x]\n", __func__, cmd); */ return -EOPNOTSUPP; } return 0; @@ -1870,15 +1871,15 @@ static int sxg_send_packets(struct sk_buff *skb, p_net_device dev) p_adapter_t adapter = (p_adapter_t) netdev_priv(dev); u32 status = STATUS_SUCCESS; - DBG_ERROR("sxg: %s ENTER sxg_send_packets skb[%p]\n", __FUNCTION__, + DBG_ERROR("sxg: %s ENTER sxg_send_packets skb[%p]\n", __func__, skb); - // Check the adapter state + /* Check the adapter state */ switch (adapter->State) { case SXG_STATE_INITIALIZING: case SXG_STATE_HALTED: case SXG_STATE_SHUTDOWN: - ASSERT(0); // unexpected - // fall through + ASSERT(0); /* unexpected */ + /* fall through */ case SXG_STATE_RESETTING: case SXG_STATE_SLEEP: case SXG_STATE_BOOTDIAG: @@ -1898,23 +1899,23 @@ static int sxg_send_packets(struct sk_buff *skb, p_net_device dev) if (status != STATUS_SUCCESS) { goto xmit_fail; } - // send a packet + /* send a packet */ status = sxg_transmit_packet(adapter, skb); if (status == STATUS_SUCCESS) { goto xmit_done; } xmit_fail: - // reject & complete all the packets if they cant be sent + /* reject & complete all the packets if they cant be sent */ if (status != STATUS_SUCCESS) { #if XXXTODO -// sxg_send_packets_fail(adapter, skb, status); +/* sxg_send_packets_fail(adapter, skb, status); */ #else SXG_DROP_DUMB_SEND(adapter, skb); adapter->stats.tx_dropped++; #endif } - DBG_ERROR("sxg: %s EXIT sxg_send_packets status[%x]\n", __FUNCTION__, + DBG_ERROR("sxg: %s EXIT sxg_send_packets status[%x]\n", __func__, status); xmit_done: @@ -1940,12 +1941,12 @@ static int sxg_transmit_packet(p_adapter_t adapter, struct sk_buff *skb) void *SglBuffer; u32 SglBufferLength; - // The vast majority of work is done in the shared - // sxg_dumb_sgl routine. + /* The vast majority of work is done in the shared */ + /* sxg_dumb_sgl routine. */ SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "DumbSend", adapter, skb, 0, 0); - // Allocate a SGL buffer + /* Allocate a SGL buffer */ SXG_GET_SGL_BUFFER(adapter, SxgSgl); if (!SxgSgl) { adapter->Stats.NoSglBuf++; @@ -1963,9 +1964,9 @@ static int sxg_transmit_packet(p_adapter_t adapter, struct sk_buff *skb) SxgSgl->DumbPacket = skb; pSgl = NULL; - // Call the common sxg_dumb_sgl routine to complete the send. + /* Call the common sxg_dumb_sgl routine to complete the send. */ sxg_dumb_sgl(pSgl, SxgSgl); - // Return success sxg_dumb_sgl (or something later) will complete it. + /* Return success sxg_dumb_sgl (or something later) will complete it. */ return (STATUS_SUCCESS); } @@ -1983,39 +1984,39 @@ static void sxg_dumb_sgl(PSCATTER_GATHER_LIST pSgl, PSXG_SCATTER_GATHER SxgSgl) { p_adapter_t adapter = SxgSgl->adapter; struct sk_buff *skb = SxgSgl->DumbPacket; - // For now, all dumb-nic sends go on RSS queue zero + /* For now, all dumb-nic sends go on RSS queue zero */ PSXG_XMT_RING XmtRing = &adapter->XmtRings[0]; PSXG_RING_INFO XmtRingInfo = &adapter->XmtRingZeroInfo; PSXG_CMD XmtCmd = NULL; -// u32 Index = 0; +/* u32 Index = 0; */ u32 DataLength = skb->len; -// unsigned int BufLen; -// u32 SglOffset; +/* unsigned int BufLen; */ +/* u32 SglOffset; */ u64 phys_addr; SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "DumbSgl", pSgl, SxgSgl, 0, 0); - // Set aside a pointer to the sgl + /* Set aside a pointer to the sgl */ SxgSgl->pSgl = pSgl; - // Sanity check that our SGL format is as we expect. + /* Sanity check that our SGL format is as we expect. */ ASSERT(sizeof(SXG_X64_SGE) == sizeof(SCATTER_GATHER_ELEMENT)); - // Shouldn't be a vlan tag on this frame + /* Shouldn't be a vlan tag on this frame */ ASSERT(SxgSgl->VlanTag.VlanTci == 0); ASSERT(SxgSgl->VlanTag.VlanTpid == 0); - // From here below we work with the SGL placed in our - // buffer. + /* From here below we work with the SGL placed in our */ + /* buffer. */ SxgSgl->Sgl.NumberOfElements = 1; - // Grab the spinlock and acquire a command + /* Grab the spinlock and acquire a command */ spin_lock(&adapter->XmtZeroLock); SXG_GET_CMD(XmtRing, XmtRingInfo, XmtCmd, SxgSgl); if (XmtCmd == NULL) { - // Call sxg_complete_slow_send to see if we can - // free up any XmtRingZero entries and then try again + /* Call sxg_complete_slow_send to see if we can */ + /* free up any XmtRingZero entries and then try again */ spin_unlock(&adapter->XmtZeroLock); sxg_complete_slow_send(adapter); spin_lock(&adapter->XmtZeroLock); @@ -2027,10 +2028,10 @@ static void sxg_dumb_sgl(PSCATTER_GATHER_LIST pSgl, PSXG_SCATTER_GATHER SxgSgl) } SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "DumbCmd", XmtCmd, XmtRingInfo->Head, XmtRingInfo->Tail, 0); - // Update stats + /* Update stats */ adapter->Stats.DumbXmtPkts++; adapter->Stats.DumbXmtBytes += DataLength; -#if XXXTODO // Stats stuff +#if XXXTODO /* Stats stuff */ if (SXG_MULTICAST_PACKET(EtherHdr)) { if (SXG_BROADCAST_PACKET(EtherHdr)) { adapter->Stats.DumbXmtBcastPkts++; @@ -2044,8 +2045,8 @@ static void sxg_dumb_sgl(PSCATTER_GATHER_LIST pSgl, PSXG_SCATTER_GATHER SxgSgl) adapter->Stats.DumbXmtUcastBytes += DataLength; } #endif - // Fill in the command - // Copy out the first SGE to the command and adjust for offset + /* Fill in the command */ + /* Copy out the first SGE to the command and adjust for offset */ phys_addr = pci_map_single(adapter->pcidev, skb->data, skb->len, PCI_DMA_TODEVICE); @@ -2053,54 +2054,54 @@ static void sxg_dumb_sgl(PSCATTER_GATHER_LIST pSgl, PSXG_SCATTER_GATHER SxgSgl) XmtCmd->Buffer.FirstSgeAddress = XmtCmd->Buffer.FirstSgeAddress << 32; XmtCmd->Buffer.FirstSgeAddress = XmtCmd->Buffer.FirstSgeAddress | SXG_GET_ADDR_LOW(phys_addr); -// XmtCmd->Buffer.FirstSgeAddress = SxgSgl->Sgl.Elements[Index].Address; -// XmtCmd->Buffer.FirstSgeAddress.LowPart += MdlOffset; +/* XmtCmd->Buffer.FirstSgeAddress = SxgSgl->Sgl.Elements[Index].Address; */ +/* XmtCmd->Buffer.FirstSgeAddress.LowPart += MdlOffset; */ XmtCmd->Buffer.FirstSgeLength = DataLength; - // Set a pointer to the remaining SGL entries -// XmtCmd->Sgl = SxgSgl->PhysicalAddress; - // Advance the physical address of the SxgSgl structure to - // the second SGE -// SglOffset = (u32)((u32 *)(&SxgSgl->Sgl.Elements[Index+1]) - -// (u32 *)SxgSgl); -// XmtCmd->Sgl.LowPart += SglOffset; + /* Set a pointer to the remaining SGL entries */ +/* XmtCmd->Sgl = SxgSgl->PhysicalAddress; */ + /* Advance the physical address of the SxgSgl structure to */ + /* the second SGE */ +/* SglOffset = (u32)((u32 *)(&SxgSgl->Sgl.Elements[Index+1]) - */ +/* (u32 *)SxgSgl); */ +/* XmtCmd->Sgl.LowPart += SglOffset; */ XmtCmd->Buffer.SgeOffset = 0; - // Note - TotalLength might be overwritten with MSS below.. + /* Note - TotalLength might be overwritten with MSS below.. */ XmtCmd->Buffer.TotalLength = DataLength; - XmtCmd->SgEntries = 1; //(ushort)(SxgSgl->Sgl.NumberOfElements - Index); + XmtCmd->SgEntries = 1; /*(ushort)(SxgSgl->Sgl.NumberOfElements - Index); */ XmtCmd->Flags = 0; - // - // Advance transmit cmd descripter by 1. - // NOTE - See comments in SxgTcpOutput where we write - // to the XmtCmd register regarding CPU ID values and/or - // multiple commands. - // - // + /* */ + /* Advance transmit cmd descripter by 1. */ + /* NOTE - See comments in SxgTcpOutput where we write */ + /* to the XmtCmd register regarding CPU ID values and/or */ + /* multiple commands. */ + /* */ + /* */ WRITE_REG(adapter->UcodeRegs[0].XmtCmd, 1, TRUE); - // - // - adapter->Stats.XmtQLen++; // Stats within lock + /* */ + /* */ + adapter->Stats.XmtQLen++; /* Stats within lock */ spin_unlock(&adapter->XmtZeroLock); SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "XDumSgl2", XmtCmd, pSgl, SxgSgl, 0); return; abortcmd: - // NOTE - Only jump to this label AFTER grabbing the - // XmtZeroLock, and DO NOT DROP IT between the - // command allocation and the following abort. + /* NOTE - Only jump to this label AFTER grabbing the */ + /* XmtZeroLock, and DO NOT DROP IT between the */ + /* command allocation and the following abort. */ if (XmtCmd) { SXG_ABORT_CMD(XmtRingInfo); } spin_unlock(&adapter->XmtZeroLock); -// failsgl: - // Jump to this label if failure occurs before the - // XmtZeroLock is grabbed +/* failsgl: */ + /* Jump to this label if failure occurs before the */ + /* XmtZeroLock is grabbed */ adapter->Stats.XmtErrors++; SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_IMPORTANT, "DumSGFal", pSgl, SxgSgl, XmtRingInfo->Head, XmtRingInfo->Tail); - SXG_COMPLETE_DUMB_SEND(adapter, SxgSgl->DumbPacket); // SxgSgl->DumbPacket is the skb + SXG_COMPLETE_DUMB_SEND(adapter, SxgSgl->DumbPacket); /* SxgSgl->DumbPacket is the skb */ } /*************************************************************** @@ -2127,122 +2128,122 @@ static int sxg_initialize_link(p_adapter_t adapter) SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "InitLink", adapter, 0, 0, 0); - // Reset PHY and XGXS module + /* Reset PHY and XGXS module */ WRITE_REG(HwRegs->LinkStatus, LS_SERDES_POWER_DOWN, TRUE); - // Reset transmit configuration register + /* Reset transmit configuration register */ WRITE_REG(HwRegs->XmtConfig, XMT_CONFIG_RESET, TRUE); - // Reset receive configuration register + /* Reset receive configuration register */ WRITE_REG(HwRegs->RcvConfig, RCV_CONFIG_RESET, TRUE); - // Reset all MAC modules + /* Reset all MAC modules */ WRITE_REG(HwRegs->MacConfig0, AXGMAC_CFG0_SUB_RESET, TRUE); - // Link address 0 - // XXXTODO - This assumes the MAC address (0a:0b:0c:0d:0e:0f) - // is stored with the first nibble (0a) in the byte 0 - // of the Mac address. Possibly reverse? + /* Link address 0 */ + /* XXXTODO - This assumes the MAC address (0a:0b:0c:0d:0e:0f) */ + /* is stored with the first nibble (0a) in the byte 0 */ + /* of the Mac address. Possibly reverse? */ Value = *(u32 *) adapter->MacAddr; WRITE_REG(HwRegs->LinkAddress0Low, Value, TRUE); - // also write the MAC address to the MAC. Endian is reversed. + /* also write the MAC address to the MAC. Endian is reversed. */ WRITE_REG(HwRegs->MacAddressLow, ntohl(Value), TRUE); Value = (*(u16 *) & adapter->MacAddr[4] & 0x0000FFFF); WRITE_REG(HwRegs->LinkAddress0High, Value | LINK_ADDRESS_ENABLE, TRUE); - // endian swap for the MAC (put high bytes in bits [31:16], swapped) + /* endian swap for the MAC (put high bytes in bits [31:16], swapped) */ Value = ntohl(Value); WRITE_REG(HwRegs->MacAddressHigh, Value, TRUE); - // Link address 1 + /* Link address 1 */ WRITE_REG(HwRegs->LinkAddress1Low, 0, TRUE); WRITE_REG(HwRegs->LinkAddress1High, 0, TRUE); - // Link address 2 + /* Link address 2 */ WRITE_REG(HwRegs->LinkAddress2Low, 0, TRUE); WRITE_REG(HwRegs->LinkAddress2High, 0, TRUE); - // Link address 3 + /* Link address 3 */ WRITE_REG(HwRegs->LinkAddress3Low, 0, TRUE); WRITE_REG(HwRegs->LinkAddress3High, 0, TRUE); - // Enable MAC modules + /* Enable MAC modules */ WRITE_REG(HwRegs->MacConfig0, 0, TRUE); - // Configure MAC - WRITE_REG(HwRegs->MacConfig1, (AXGMAC_CFG1_XMT_PAUSE | // Allow sending of pause - AXGMAC_CFG1_XMT_EN | // Enable XMT - AXGMAC_CFG1_RCV_PAUSE | // Enable detection of pause - AXGMAC_CFG1_RCV_EN | // Enable receive - AXGMAC_CFG1_SHORT_ASSERT | // short frame detection - AXGMAC_CFG1_CHECK_LEN | // Verify frame length - AXGMAC_CFG1_GEN_FCS | // Generate FCS - AXGMAC_CFG1_PAD_64), // Pad frames to 64 bytes + /* Configure MAC */ + WRITE_REG(HwRegs->MacConfig1, (AXGMAC_CFG1_XMT_PAUSE | /* Allow sending of pause */ + AXGMAC_CFG1_XMT_EN | /* Enable XMT */ + AXGMAC_CFG1_RCV_PAUSE | /* Enable detection of pause */ + AXGMAC_CFG1_RCV_EN | /* Enable receive */ + AXGMAC_CFG1_SHORT_ASSERT | /* short frame detection */ + AXGMAC_CFG1_CHECK_LEN | /* Verify frame length */ + AXGMAC_CFG1_GEN_FCS | /* Generate FCS */ + AXGMAC_CFG1_PAD_64), /* Pad frames to 64 bytes */ TRUE); - // Set AXGMAC max frame length if jumbo. Not needed for standard MTU + /* Set AXGMAC max frame length if jumbo. Not needed for standard MTU */ if (adapter->JumboEnabled) { WRITE_REG(HwRegs->MacMaxFrameLen, AXGMAC_MAXFRAME_JUMBO, TRUE); } - // AMIIM Configuration Register - - // The value placed in the AXGMAC_AMIIM_CFG_HALF_CLOCK portion - // (bottom bits) of this register is used to determine the - // MDC frequency as specified in the A-XGMAC Design Document. - // This value must not be zero. The following value (62 or 0x3E) - // is based on our MAC transmit clock frequency (MTCLK) of 312.5 MHz. - // Given a maximum MDIO clock frequency of 2.5 MHz (see the PHY spec), - // we get: 312.5/(2*(X+1)) < 2.5 ==> X = 62. - // This value happens to be the default value for this register, - // so we really don't have to do this. + /* AMIIM Configuration Register - */ + /* The value placed in the AXGMAC_AMIIM_CFG_HALF_CLOCK portion */ + /* (bottom bits) of this register is used to determine the */ + /* MDC frequency as specified in the A-XGMAC Design Document. */ + /* This value must not be zero. The following value (62 or 0x3E) */ + /* is based on our MAC transmit clock frequency (MTCLK) of 312.5 MHz. */ + /* Given a maximum MDIO clock frequency of 2.5 MHz (see the PHY spec), */ + /* we get: 312.5/(2*(X+1)) < 2.5 ==> X = 62. */ + /* This value happens to be the default value for this register, */ + /* so we really don't have to do this. */ WRITE_REG(HwRegs->MacAmiimConfig, 0x0000003E, TRUE); - // Power up and enable PHY and XAUI/XGXS/Serdes logic + /* Power up and enable PHY and XAUI/XGXS/Serdes logic */ WRITE_REG(HwRegs->LinkStatus, (LS_PHY_CLR_RESET | LS_XGXS_ENABLE | LS_XGXS_CTL | LS_PHY_CLK_EN | LS_ATTN_ALARM), TRUE); DBG_ERROR("After Power Up and enable PHY in sxg_initialize_link\n"); - // Per information given by Aeluros, wait 100 ms after removing reset. - // It's not enough to wait for the self-clearing reset bit in reg 0 to clear. + /* Per information given by Aeluros, wait 100 ms after removing reset. */ + /* It's not enough to wait for the self-clearing reset bit in reg 0 to clear. */ mdelay(100); - // Verify the PHY has come up by checking that the Reset bit has cleared. - status = sxg_read_mdio_reg(adapter, MIIM_DEV_PHY_PMA, // PHY PMA/PMD module - PHY_PMA_CONTROL1, // PMA/PMD control register + /* Verify the PHY has come up by checking that the Reset bit has cleared. */ + status = sxg_read_mdio_reg(adapter, MIIM_DEV_PHY_PMA, /* PHY PMA/PMD module */ + PHY_PMA_CONTROL1, /* PMA/PMD control register */ &Value); if (status != STATUS_SUCCESS) return (STATUS_FAILURE); - if (Value & PMA_CONTROL1_RESET) // reset complete if bit is 0 + if (Value & PMA_CONTROL1_RESET) /* reset complete if bit is 0 */ return (STATUS_FAILURE); - // The SERDES should be initialized by now - confirm + /* The SERDES should be initialized by now - confirm */ READ_REG(HwRegs->LinkStatus, Value); - if (Value & LS_SERDES_DOWN) // verify SERDES is initialized + if (Value & LS_SERDES_DOWN) /* verify SERDES is initialized */ return (STATUS_FAILURE); - // The XAUI link should also be up - confirm - if (!(Value & LS_XAUI_LINK_UP)) // verify XAUI link is up + /* The XAUI link should also be up - confirm */ + if (!(Value & LS_XAUI_LINK_UP)) /* verify XAUI link is up */ return (STATUS_FAILURE); - // Initialize the PHY + /* Initialize the PHY */ status = sxg_phy_init(adapter); if (status != STATUS_SUCCESS) return (STATUS_FAILURE); - // Enable the Link Alarm - status = sxg_write_mdio_reg(adapter, MIIM_DEV_PHY_PMA, // PHY PMA/PMD module - LASI_CONTROL, // LASI control register - LASI_CTL_LS_ALARM_ENABLE); // enable link alarm bit + /* Enable the Link Alarm */ + status = sxg_write_mdio_reg(adapter, MIIM_DEV_PHY_PMA, /* PHY PMA/PMD module */ + LASI_CONTROL, /* LASI control register */ + LASI_CTL_LS_ALARM_ENABLE); /* enable link alarm bit */ if (status != STATUS_SUCCESS) return (STATUS_FAILURE); - // XXXTODO - temporary - verify bit is set - status = sxg_read_mdio_reg(adapter, MIIM_DEV_PHY_PMA, // PHY PMA/PMD module - LASI_CONTROL, // LASI control register + /* XXXTODO - temporary - verify bit is set */ + status = sxg_read_mdio_reg(adapter, MIIM_DEV_PHY_PMA, /* PHY PMA/PMD module */ + LASI_CONTROL, /* LASI control register */ &Value); if (status != STATUS_SUCCESS) return (STATUS_FAILURE); if (!(Value & LASI_CTL_LS_ALARM_ENABLE)) { DBG_ERROR("Error! LASI Control Alarm Enable bit not set!\n"); } - // Enable receive + /* Enable receive */ MaxFrame = adapter->JumboEnabled ? JUMBOMAXFRAME : ETHERMAXFRAME; ConfigData = (RCV_CONFIG_ENABLE | RCV_CONFIG_ENPARSE | @@ -2256,7 +2257,7 @@ static int sxg_initialize_link(p_adapter_t adapter) WRITE_REG(HwRegs->XmtConfig, XMT_CONFIG_ENABLE, TRUE); - // Mark the link as down. We'll get a link event when it comes up. + /* Mark the link as down. We'll get a link event when it comes up. */ sxg_link_state(adapter, SXG_LINK_DOWN); SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "XInitLnk", @@ -2279,35 +2280,35 @@ static int sxg_phy_init(p_adapter_t adapter) PPHY_UCODE p; int status; - DBG_ERROR("ENTER %s\n", __FUNCTION__); + DBG_ERROR("ENTER %s\n", __func__); - // Read a register to identify the PHY type - status = sxg_read_mdio_reg(adapter, MIIM_DEV_PHY_PMA, // PHY PMA/PMD module - 0xC205, // PHY ID register (?) - &Value); // XXXTODO - add def + /* Read a register to identify the PHY type */ + status = sxg_read_mdio_reg(adapter, MIIM_DEV_PHY_PMA, /* PHY PMA/PMD module */ + 0xC205, /* PHY ID register (?) */ + &Value); /* XXXTODO - add def */ if (status != STATUS_SUCCESS) return (STATUS_FAILURE); - if (Value == 0x0012) { // 0x0012 == AEL2005C PHY(?) - XXXTODO - add def + if (Value == 0x0012) { /* 0x0012 == AEL2005C PHY(?) - XXXTODO - add def */ DBG_ERROR ("AEL2005C PHY detected. Downloading PHY microcode.\n"); - // Initialize AEL2005C PHY and download PHY microcode + /* Initialize AEL2005C PHY and download PHY microcode */ for (p = PhyUcode; p->Addr != 0xFFFF; p++) { if (p->Addr == 0) { - // if address == 0, data == sleep time in ms + /* if address == 0, data == sleep time in ms */ mdelay(p->Data); } else { - // write the given data to the specified address - status = sxg_write_mdio_reg(adapter, MIIM_DEV_PHY_PMA, // PHY PMA/PMD module - p->Addr, // PHY address - p->Data); // PHY data + /* write the given data to the specified address */ + status = sxg_write_mdio_reg(adapter, MIIM_DEV_PHY_PMA, /* PHY PMA/PMD module */ + p->Addr, /* PHY address */ + p->Data); /* PHY data */ if (status != STATUS_SUCCESS) return (STATUS_FAILURE); } } } - DBG_ERROR("EXIT %s\n", __FUNCTION__); + DBG_ERROR("EXIT %s\n", __func__); return (STATUS_SUCCESS); } @@ -2330,42 +2331,42 @@ static void sxg_link_event(p_adapter_t adapter) SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "LinkEvnt", adapter, 0, 0, 0); - DBG_ERROR("ENTER %s\n", __FUNCTION__); + DBG_ERROR("ENTER %s\n", __func__); - // Check the Link Status register. We should have a Link Alarm. + /* Check the Link Status register. We should have a Link Alarm. */ READ_REG(HwRegs->LinkStatus, Value); if (Value & LS_LINK_ALARM) { - // We got a Link Status alarm. First, pause to let the - // link state settle (it can bounce a number of times) + /* We got a Link Status alarm. First, pause to let the */ + /* link state settle (it can bounce a number of times) */ mdelay(10); - // Now clear the alarm by reading the LASI status register. - status = sxg_read_mdio_reg(adapter, MIIM_DEV_PHY_PMA, // PHY PMA/PMD module - LASI_STATUS, // LASI status register + /* Now clear the alarm by reading the LASI status register. */ + status = sxg_read_mdio_reg(adapter, MIIM_DEV_PHY_PMA, /* PHY PMA/PMD module */ + LASI_STATUS, /* LASI status register */ &Value); if (status != STATUS_SUCCESS) { DBG_ERROR("Error reading LASI Status MDIO register!\n"); sxg_link_state(adapter, SXG_LINK_DOWN); -// ASSERT(0); +/* ASSERT(0); */ } ASSERT(Value & LASI_STATUS_LS_ALARM); - // Now get and set the link state + /* Now get and set the link state */ LinkState = sxg_get_link_state(adapter); sxg_link_state(adapter, LinkState); DBG_ERROR("SXG: Link Alarm occurred. Link is %s\n", ((LinkState == SXG_LINK_UP) ? "UP" : "DOWN")); } else { - // XXXTODO - Assuming Link Attention is only being generated for the - // Link Alarm pin (and not for a XAUI Link Status change), then it's - // impossible to get here. Yet we've gotten here twice (under extreme - // conditions - bouncing the link up and down many times a second). - // Needs further investigation. + /* XXXTODO - Assuming Link Attention is only being generated for the */ + /* Link Alarm pin (and not for a XAUI Link Status change), then it's */ + /* impossible to get here. Yet we've gotten here twice (under extreme */ + /* conditions - bouncing the link up and down many times a second). */ + /* Needs further investigation. */ DBG_ERROR("SXG: sxg_link_event: Can't get here!\n"); DBG_ERROR("SXG: Link Status == 0x%08X.\n", Value); -// ASSERT(0); +/* ASSERT(0); */ } - DBG_ERROR("EXIT %s\n", __FUNCTION__); + DBG_ERROR("EXIT %s\n", __func__); } @@ -2383,50 +2384,50 @@ static SXG_LINK_STATE sxg_get_link_state(p_adapter_t adapter) int status; u32 Value; - DBG_ERROR("ENTER %s\n", __FUNCTION__); + DBG_ERROR("ENTER %s\n", __func__); SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "GetLink", adapter, 0, 0, 0); - // Per the Xenpak spec (and the IEEE 10Gb spec?), the link is up if - // the following 3 bits (from 3 different MDIO registers) are all true. - status = sxg_read_mdio_reg(adapter, MIIM_DEV_PHY_PMA, // PHY PMA/PMD module - PHY_PMA_RCV_DET, // PMA/PMD Receive Signal Detect register + /* Per the Xenpak spec (and the IEEE 10Gb spec?), the link is up if */ + /* the following 3 bits (from 3 different MDIO registers) are all true. */ + status = sxg_read_mdio_reg(adapter, MIIM_DEV_PHY_PMA, /* PHY PMA/PMD module */ + PHY_PMA_RCV_DET, /* PMA/PMD Receive Signal Detect register */ &Value); if (status != STATUS_SUCCESS) goto bad; - // If PMA/PMD receive signal detect is 0, then the link is down + /* If PMA/PMD receive signal detect is 0, then the link is down */ if (!(Value & PMA_RCV_DETECT)) return (SXG_LINK_DOWN); - status = sxg_read_mdio_reg(adapter, MIIM_DEV_PHY_PCS, // PHY PCS module - PHY_PCS_10G_STATUS1, // PCS 10GBASE-R Status 1 register + status = sxg_read_mdio_reg(adapter, MIIM_DEV_PHY_PCS, /* PHY PCS module */ + PHY_PCS_10G_STATUS1, /* PCS 10GBASE-R Status 1 register */ &Value); if (status != STATUS_SUCCESS) goto bad; - // If PCS is not locked to receive blocks, then the link is down + /* If PCS is not locked to receive blocks, then the link is down */ if (!(Value & PCS_10B_BLOCK_LOCK)) return (SXG_LINK_DOWN); - status = sxg_read_mdio_reg(adapter, MIIM_DEV_PHY_XS, // PHY XS module - PHY_XS_LANE_STATUS, // XS Lane Status register + status = sxg_read_mdio_reg(adapter, MIIM_DEV_PHY_XS, /* PHY XS module */ + PHY_XS_LANE_STATUS, /* XS Lane Status register */ &Value); if (status != STATUS_SUCCESS) goto bad; - // If XS transmit lanes are not aligned, then the link is down + /* If XS transmit lanes are not aligned, then the link is down */ if (!(Value & XS_LANE_ALIGN)) return (SXG_LINK_DOWN); - // All 3 bits are true, so the link is up - DBG_ERROR("EXIT %s\n", __FUNCTION__); + /* All 3 bits are true, so the link is up */ + DBG_ERROR("EXIT %s\n", __func__); return (SXG_LINK_UP); bad: - // An error occurred reading an MDIO register. This shouldn't happen. + /* An error occurred reading an MDIO register. This shouldn't happen. */ DBG_ERROR("Error reading an MDIO register!\n"); ASSERT(0); return (SXG_LINK_DOWN); @@ -2437,11 +2438,11 @@ static void sxg_indicate_link_state(p_adapter_t adapter, { if (adapter->LinkState == SXG_LINK_UP) { DBG_ERROR("%s: LINK now UP, call netif_start_queue\n", - __FUNCTION__); + __func__); netif_start_queue(adapter->netdev); } else { DBG_ERROR("%s: LINK now DOWN, call netif_stop_queue\n", - __FUNCTION__); + __func__); netif_stop_queue(adapter->netdev); } } @@ -2464,23 +2465,23 @@ static void sxg_link_state(p_adapter_t adapter, SXG_LINK_STATE LinkState) SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_IMPORTANT, "LnkINDCT", adapter, LinkState, adapter->LinkState, adapter->State); - DBG_ERROR("ENTER %s\n", __FUNCTION__); + DBG_ERROR("ENTER %s\n", __func__); - // Hold the adapter lock during this routine. Maybe move - // the lock to the caller. + /* Hold the adapter lock during this routine. Maybe move */ + /* the lock to the caller. */ spin_lock(&adapter->AdapterLock); if (LinkState == adapter->LinkState) { - // Nothing changed.. + /* Nothing changed.. */ spin_unlock(&adapter->AdapterLock); - DBG_ERROR("EXIT #0 %s\n", __FUNCTION__); + DBG_ERROR("EXIT #0 %s\n", __func__); return; } - // Save the adapter state + /* Save the adapter state */ adapter->LinkState = LinkState; - // Drop the lock and indicate link state + /* Drop the lock and indicate link state */ spin_unlock(&adapter->AdapterLock); - DBG_ERROR("EXIT #1 %s\n", __FUNCTION__); + DBG_ERROR("EXIT #1 %s\n", __func__); sxg_indicate_link_state(adapter, LinkState); } @@ -2501,76 +2502,76 @@ static int sxg_write_mdio_reg(p_adapter_t adapter, u32 DevAddr, u32 RegAddr, u32 Value) { PSXG_HW_REGS HwRegs = adapter->HwRegs; - u32 AddrOp; // Address operation (written to MIIM field reg) - u32 WriteOp; // Write operation (written to MIIM field reg) - u32 Cmd; // Command (written to MIIM command reg) + u32 AddrOp; /* Address operation (written to MIIM field reg) */ + u32 WriteOp; /* Write operation (written to MIIM field reg) */ + u32 Cmd; /* Command (written to MIIM command reg) */ u32 ValueRead; u32 Timeout; -// DBG_ERROR("ENTER %s\n", __FUNCTION__); +/* DBG_ERROR("ENTER %s\n", __func__); */ SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "WrtMDIO", adapter, 0, 0, 0); - // Ensure values don't exceed field width - DevAddr &= 0x001F; // 5-bit field - RegAddr &= 0xFFFF; // 16-bit field - Value &= 0xFFFF; // 16-bit field + /* Ensure values don't exceed field width */ + DevAddr &= 0x001F; /* 5-bit field */ + RegAddr &= 0xFFFF; /* 16-bit field */ + Value &= 0xFFFF; /* 16-bit field */ - // Set MIIM field register bits for an MIIM address operation + /* Set MIIM field register bits for an MIIM address operation */ AddrOp = (MIIM_PORT_NUM << AXGMAC_AMIIM_FIELD_PORT_SHIFT) | (DevAddr << AXGMAC_AMIIM_FIELD_DEV_SHIFT) | (MIIM_TA_10GB << AXGMAC_AMIIM_FIELD_TA_SHIFT) | (MIIM_OP_ADDR << AXGMAC_AMIIM_FIELD_OP_SHIFT) | RegAddr; - // Set MIIM field register bits for an MIIM write operation + /* Set MIIM field register bits for an MIIM write operation */ WriteOp = (MIIM_PORT_NUM << AXGMAC_AMIIM_FIELD_PORT_SHIFT) | (DevAddr << AXGMAC_AMIIM_FIELD_DEV_SHIFT) | (MIIM_TA_10GB << AXGMAC_AMIIM_FIELD_TA_SHIFT) | (MIIM_OP_WRITE << AXGMAC_AMIIM_FIELD_OP_SHIFT) | Value; - // Set MIIM command register bits to execute an MIIM command + /* Set MIIM command register bits to execute an MIIM command */ Cmd = AXGMAC_AMIIM_CMD_START | AXGMAC_AMIIM_CMD_10G_OPERATION; - // Reset the command register command bit (in case it's not 0) + /* Reset the command register command bit (in case it's not 0) */ WRITE_REG(HwRegs->MacAmiimCmd, 0, TRUE); - // MIIM write to set the address of the specified MDIO register + /* MIIM write to set the address of the specified MDIO register */ WRITE_REG(HwRegs->MacAmiimField, AddrOp, TRUE); - // Write to MIIM Command Register to execute to address operation + /* Write to MIIM Command Register to execute to address operation */ WRITE_REG(HwRegs->MacAmiimCmd, Cmd, TRUE); - // Poll AMIIM Indicator register to wait for completion + /* Poll AMIIM Indicator register to wait for completion */ Timeout = SXG_LINK_TIMEOUT; do { - udelay(100); // Timeout in 100us units + udelay(100); /* Timeout in 100us units */ READ_REG(HwRegs->MacAmiimIndicator, ValueRead); if (--Timeout == 0) { return (STATUS_FAILURE); } } while (ValueRead & AXGMAC_AMIIM_INDC_BUSY); - // Reset the command register command bit + /* Reset the command register command bit */ WRITE_REG(HwRegs->MacAmiimCmd, 0, TRUE); - // MIIM write to set up an MDIO write operation + /* MIIM write to set up an MDIO write operation */ WRITE_REG(HwRegs->MacAmiimField, WriteOp, TRUE); - // Write to MIIM Command Register to execute the write operation + /* Write to MIIM Command Register to execute the write operation */ WRITE_REG(HwRegs->MacAmiimCmd, Cmd, TRUE); - // Poll AMIIM Indicator register to wait for completion + /* Poll AMIIM Indicator register to wait for completion */ Timeout = SXG_LINK_TIMEOUT; do { - udelay(100); // Timeout in 100us units + udelay(100); /* Timeout in 100us units */ READ_REG(HwRegs->MacAmiimIndicator, ValueRead); if (--Timeout == 0) { return (STATUS_FAILURE); } } while (ValueRead & AXGMAC_AMIIM_INDC_BUSY); -// DBG_ERROR("EXIT %s\n", __FUNCTION__); +/* DBG_ERROR("EXIT %s\n", __func__); */ return (STATUS_SUCCESS); } @@ -2591,110 +2592,78 @@ static int sxg_read_mdio_reg(p_adapter_t adapter, u32 DevAddr, u32 RegAddr, u32 *pValue) { PSXG_HW_REGS HwRegs = adapter->HwRegs; - u32 AddrOp; // Address operation (written to MIIM field reg) - u32 ReadOp; // Read operation (written to MIIM field reg) - u32 Cmd; // Command (written to MIIM command reg) + u32 AddrOp; /* Address operation (written to MIIM field reg) */ + u32 ReadOp; /* Read operation (written to MIIM field reg) */ + u32 Cmd; /* Command (written to MIIM command reg) */ u32 ValueRead; u32 Timeout; SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "WrtMDIO", adapter, 0, 0, 0); -// DBG_ERROR("ENTER %s\n", __FUNCTION__); +/* DBG_ERROR("ENTER %s\n", __func__); */ - // Ensure values don't exceed field width - DevAddr &= 0x001F; // 5-bit field - RegAddr &= 0xFFFF; // 16-bit field + /* Ensure values don't exceed field width */ + DevAddr &= 0x001F; /* 5-bit field */ + RegAddr &= 0xFFFF; /* 16-bit field */ - // Set MIIM field register bits for an MIIM address operation + /* Set MIIM field register bits for an MIIM address operation */ AddrOp = (MIIM_PORT_NUM << AXGMAC_AMIIM_FIELD_PORT_SHIFT) | (DevAddr << AXGMAC_AMIIM_FIELD_DEV_SHIFT) | (MIIM_TA_10GB << AXGMAC_AMIIM_FIELD_TA_SHIFT) | (MIIM_OP_ADDR << AXGMAC_AMIIM_FIELD_OP_SHIFT) | RegAddr; - // Set MIIM field register bits for an MIIM read operation + /* Set MIIM field register bits for an MIIM read operation */ ReadOp = (MIIM_PORT_NUM << AXGMAC_AMIIM_FIELD_PORT_SHIFT) | (DevAddr << AXGMAC_AMIIM_FIELD_DEV_SHIFT) | (MIIM_TA_10GB << AXGMAC_AMIIM_FIELD_TA_SHIFT) | (MIIM_OP_READ << AXGMAC_AMIIM_FIELD_OP_SHIFT); - // Set MIIM command register bits to execute an MIIM command + /* Set MIIM command register bits to execute an MIIM command */ Cmd = AXGMAC_AMIIM_CMD_START | AXGMAC_AMIIM_CMD_10G_OPERATION; - // Reset the command register command bit (in case it's not 0) + /* Reset the command register command bit (in case it's not 0) */ WRITE_REG(HwRegs->MacAmiimCmd, 0, TRUE); - // MIIM write to set the address of the specified MDIO register + /* MIIM write to set the address of the specified MDIO register */ WRITE_REG(HwRegs->MacAmiimField, AddrOp, TRUE); - // Write to MIIM Command Register to execute to address operation + /* Write to MIIM Command Register to execute to address operation */ WRITE_REG(HwRegs->MacAmiimCmd, Cmd, TRUE); - // Poll AMIIM Indicator register to wait for completion + /* Poll AMIIM Indicator register to wait for completion */ Timeout = SXG_LINK_TIMEOUT; do { - udelay(100); // Timeout in 100us units + udelay(100); /* Timeout in 100us units */ READ_REG(HwRegs->MacAmiimIndicator, ValueRead); if (--Timeout == 0) { return (STATUS_FAILURE); } } while (ValueRead & AXGMAC_AMIIM_INDC_BUSY); - // Reset the command register command bit + /* Reset the command register command bit */ WRITE_REG(HwRegs->MacAmiimCmd, 0, TRUE); - // MIIM write to set up an MDIO register read operation + /* MIIM write to set up an MDIO register read operation */ WRITE_REG(HwRegs->MacAmiimField, ReadOp, TRUE); - // Write to MIIM Command Register to execute the read operation + /* Write to MIIM Command Register to execute the read operation */ WRITE_REG(HwRegs->MacAmiimCmd, Cmd, TRUE); - // Poll AMIIM Indicator register to wait for completion + /* Poll AMIIM Indicator register to wait for completion */ Timeout = SXG_LINK_TIMEOUT; do { - udelay(100); // Timeout in 100us units + udelay(100); /* Timeout in 100us units */ READ_REG(HwRegs->MacAmiimIndicator, ValueRead); if (--Timeout == 0) { return (STATUS_FAILURE); } } while (ValueRead & AXGMAC_AMIIM_INDC_BUSY); - // Read the MDIO register data back from the field register + /* Read the MDIO register data back from the field register */ READ_REG(HwRegs->MacAmiimField, *pValue); - *pValue &= 0xFFFF; // data is in the lower 16 bits + *pValue &= 0xFFFF; /* data is in the lower 16 bits */ -// DBG_ERROR("EXIT %s\n", __FUNCTION__); - - return (STATUS_SUCCESS); -} - -/* - * Allocate a mcast_address structure to hold the multicast address. - * Link it in. - */ -static int sxg_mcast_add_list(p_adapter_t adapter, char *address) -{ - p_mcast_address_t mcaddr, mlist; - bool equaladdr; - - /* Check to see if it already exists */ - mlist = adapter->mcastaddrs; - while (mlist) { - ETHER_EQ_ADDR(mlist->address, address, equaladdr); - if (equaladdr) { - return (STATUS_SUCCESS); - } - mlist = mlist->next; - } - - /* Doesn't already exist. Allocate a structure to hold it */ - mcaddr = kmalloc(sizeof(mcast_address_t), GFP_ATOMIC); - if (mcaddr == NULL) - return 1; - - memcpy(mcaddr->address, address, 6); - - mcaddr->next = adapter->mcastaddrs; - adapter->mcastaddrs = mcaddr; +/* DBG_ERROR("EXIT %s\n", __func__); */ return (STATUS_SUCCESS); } @@ -2710,7 +2679,6 @@ static int sxg_mcast_add_list(p_adapter_t adapter, char *address) * */ static u32 sxg_crc_table[256]; /* Table of CRC's for all possible byte values */ -static u32 sxg_crc_init; /* Is table initialized */ /* * Contruct the CRC32 table @@ -2737,6 +2705,8 @@ static void sxg_mcast_init_crc32(void) } } +#if XXXTODO +static u32 sxg_crc_init; /* Is table initialized */ /* * Return the MAC hast as described above. */ @@ -2765,6 +2735,74 @@ static unsigned char sxg_mcast_get_mac_hash(char *macaddr) return (machash); } +static void sxg_mcast_set_mask(p_adapter_t adapter) +{ + PSXG_UCODE_REGS sxg_regs = adapter->UcodeRegs; + + DBG_ERROR("%s ENTER (%s) macopts[%x] mask[%llx]\n", __func__, + adapter->netdev->name, (unsigned int)adapter->MacFilter, + adapter->MulticastMask); + + if (adapter->MacFilter & (MAC_ALLMCAST | MAC_PROMISC)) { + /* Turn on all multicast addresses. We have to do this for promiscuous + * mode as well as ALLMCAST mode. It saves the Microcode from having + * to keep state about the MAC configuration. + */ +/* DBG_ERROR("sxg: %s macopts = MAC_ALLMCAST | MAC_PROMISC\n SLUT MODE!!!\n",__func__); */ + WRITE_REG(sxg_regs->McastLow, 0xFFFFFFFF, FLUSH); + WRITE_REG(sxg_regs->McastHigh, 0xFFFFFFFF, FLUSH); +/* DBG_ERROR("%s (%s) WRITE to slic_regs slic_mcastlow&high 0xFFFFFFFF\n",__func__, adapter->netdev->name); */ + + } else { + /* Commit our multicast mast to the SLIC by writing to the multicast + * address mask registers + */ + DBG_ERROR("%s (%s) WRITE mcastlow[%lx] mcasthigh[%lx]\n", + __func__, adapter->netdev->name, + ((ulong) (adapter->MulticastMask & 0xFFFFFFFF)), + ((ulong) + ((adapter->MulticastMask >> 32) & 0xFFFFFFFF))); + + WRITE_REG(sxg_regs->McastLow, + (u32) (adapter->MulticastMask & 0xFFFFFFFF), FLUSH); + WRITE_REG(sxg_regs->McastHigh, + (u32) ((adapter-> + MulticastMask >> 32) & 0xFFFFFFFF), FLUSH); + } +} + +/* + * Allocate a mcast_address structure to hold the multicast address. + * Link it in. + */ +static int sxg_mcast_add_list(p_adapter_t adapter, char *address) +{ + p_mcast_address_t mcaddr, mlist; + bool equaladdr; + + /* Check to see if it already exists */ + mlist = adapter->mcastaddrs; + while (mlist) { + ETHER_EQ_ADDR(mlist->address, address, equaladdr); + if (equaladdr) { + return (STATUS_SUCCESS); + } + mlist = mlist->next; + } + + /* Doesn't already exist. Allocate a structure to hold it */ + mcaddr = kmalloc(sizeof(mcast_address_t), GFP_ATOMIC); + if (mcaddr == NULL) + return 1; + + memcpy(mcaddr->address, address, 6); + + mcaddr->next = adapter->mcastaddrs; + adapter->mcastaddrs = mcaddr; + + return (STATUS_SUCCESS); +} + static void sxg_mcast_set_bit(p_adapter_t adapter, char *address) { unsigned char crcpoly; @@ -2783,7 +2821,6 @@ static void sxg_mcast_set_bit(p_adapter_t adapter, char *address) static void sxg_mcast_set_list(p_net_device dev) { -#if XXXTODO p_adapter_t adapter = (p_adapter_t) netdev_priv(dev); int status = STATUS_SUCCESS; int i; @@ -2809,7 +2846,7 @@ static void sxg_mcast_set_list(p_net_device dev) } DBG_ERROR("%s a->devflags_prev[%x] dev->flags[%x] status[%x]\n", - __FUNCTION__, adapter->devflags_prev, dev->flags, status); + __func__, adapter->devflags_prev, dev->flags, status); if (adapter->devflags_prev != dev->flags) { adapter->macopts = MAC_DIRECTED; if (dev->flags) { @@ -2828,60 +2865,24 @@ static void sxg_mcast_set_list(p_net_device dev) } adapter->devflags_prev = dev->flags; DBG_ERROR("%s call sxg_config_set adapter->macopts[%x]\n", - __FUNCTION__, adapter->macopts); + __func__, adapter->macopts); sxg_config_set(adapter, TRUE); } else { if (status == STATUS_SUCCESS) { sxg_mcast_set_mask(adapter); } } -#endif return; } - -static void sxg_mcast_set_mask(p_adapter_t adapter) -{ - PSXG_UCODE_REGS sxg_regs = adapter->UcodeRegs; - - DBG_ERROR("%s ENTER (%s) macopts[%x] mask[%llx]\n", __FUNCTION__, - adapter->netdev->name, (unsigned int)adapter->MacFilter, - adapter->MulticastMask); - - if (adapter->MacFilter & (MAC_ALLMCAST | MAC_PROMISC)) { - /* Turn on all multicast addresses. We have to do this for promiscuous - * mode as well as ALLMCAST mode. It saves the Microcode from having - * to keep state about the MAC configuration. - */ -// DBG_ERROR("sxg: %s macopts = MAC_ALLMCAST | MAC_PROMISC\n SLUT MODE!!!\n",__FUNCTION__); - WRITE_REG(sxg_regs->McastLow, 0xFFFFFFFF, FLUSH); - WRITE_REG(sxg_regs->McastHigh, 0xFFFFFFFF, FLUSH); -// DBG_ERROR("%s (%s) WRITE to slic_regs slic_mcastlow&high 0xFFFFFFFF\n",__FUNCTION__, adapter->netdev->name); - - } else { - /* Commit our multicast mast to the SLIC by writing to the multicast - * address mask registers - */ - DBG_ERROR("%s (%s) WRITE mcastlow[%lx] mcasthigh[%lx]\n", - __FUNCTION__, adapter->netdev->name, - ((ulong) (adapter->MulticastMask & 0xFFFFFFFF)), - ((ulong) - ((adapter->MulticastMask >> 32) & 0xFFFFFFFF))); - - WRITE_REG(sxg_regs->McastLow, - (u32) (adapter->MulticastMask & 0xFFFFFFFF), FLUSH); - WRITE_REG(sxg_regs->McastHigh, - (u32) ((adapter-> - MulticastMask >> 32) & 0xFFFFFFFF), FLUSH); - } -} +#endif static void sxg_unmap_mmio_space(p_adapter_t adapter) { #if LINUX_FREES_ADAPTER_RESOURCES -// if (adapter->Regs) { -// iounmap(adapter->Regs); -// } -// adapter->slic_regs = NULL; +/* if (adapter->Regs) { */ +/* iounmap(adapter->Regs); */ +/* } */ +/* adapter->slic_regs = NULL; */ #endif } @@ -2909,8 +2910,8 @@ void SxgFreeResources(p_adapter_t adapter) IsrCount = adapter->MsiEnabled ? RssIds : 1; if (adapter->BasicAllocations == FALSE) { - // No allocations have been made, including spinlocks, - // or listhead initializations. Return. + /* No allocations have been made, including spinlocks, */ + /* or listhead initializations. Return. */ return; } @@ -2920,7 +2921,7 @@ void SxgFreeResources(p_adapter_t adapter) if (!(IsListEmpty(&adapter->AllSglBuffers))) { SxgFreeSglBuffers(adapter); } - // Free event queues. + /* Free event queues. */ if (adapter->EventRings) { pci_free_consistent(adapter->pcidev, sizeof(SXG_EVENT_RING) * RssIds, @@ -2947,17 +2948,17 @@ void SxgFreeResources(p_adapter_t adapter) SXG_FREE_PACKET_POOL(adapter->PacketPoolHandle); SXG_FREE_BUFFER_POOL(adapter->BufferPoolHandle); - // Unmap register spaces + /* Unmap register spaces */ SxgUnmapResources(adapter); - // Deregister DMA + /* Deregister DMA */ if (adapter->DmaHandle) { SXG_DEREGISTER_DMA(adapter->DmaHandle); } - // Deregister interrupt + /* Deregister interrupt */ SxgDeregisterInterrupt(adapter); - // Possibly free system info (5.2 only) + /* Possibly free system info (5.2 only) */ SXG_RELEASE_SYSTEM_INFO(adapter); SxgDiagFreeResources(adapter); @@ -3047,23 +3048,23 @@ static int sxg_allocate_buffer_memory(p_adapter_t adapter, SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "AllocMem", adapter, Size, BufferType, 0); - // Grab the adapter lock and check the state. - // If we're in anything other than INITIALIZING or - // RUNNING state, fail. This is to prevent - // allocations in an improper driver state + /* Grab the adapter lock and check the state. */ + /* If we're in anything other than INITIALIZING or */ + /* RUNNING state, fail. This is to prevent */ + /* allocations in an improper driver state */ spin_lock(&adapter->AdapterLock); - // Increment the AllocationsPending count while holding - // the lock. Pause processing relies on this + /* Increment the AllocationsPending count while holding */ + /* the lock. Pause processing relies on this */ ++adapter->AllocationsPending; spin_unlock(&adapter->AdapterLock); - // At initialization time allocate resources synchronously. + /* At initialization time allocate resources synchronously. */ Buffer = pci_alloc_consistent(adapter->pcidev, Size, &pBuffer); if (Buffer == NULL) { spin_lock(&adapter->AdapterLock); - // Decrement the AllocationsPending count while holding - // the lock. Pause processing relies on this + /* Decrement the AllocationsPending count while holding */ + /* the lock. Pause processing relies on this */ --adapter->AllocationsPending; spin_unlock(&adapter->AdapterLock); SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "AlcMemF1", @@ -3113,10 +3114,10 @@ static void sxg_allocate_rcvblock_complete(p_adapter_t adapter, ASSERT((BufferSize == SXG_RCV_DATA_BUFFER_SIZE) || (BufferSize == SXG_RCV_JUMBO_BUFFER_SIZE)); ASSERT(Length == SXG_RCV_BLOCK_SIZE(BufferSize)); - // First, initialize the contained pool of receive data - // buffers. This initialization requires NBL/NB/MDL allocations, - // If any of them fail, free the block and return without - // queueing the shared memory + /* First, initialize the contained pool of receive data */ + /* buffers. This initialization requires NBL/NB/MDL allocations, */ + /* If any of them fail, free the block and return without */ + /* queueing the shared memory */ RcvDataBuffer = RcvBlock; #if 0 for (i = 0, Paddr = *PhysicalAddress; @@ -3126,14 +3127,14 @@ static void sxg_allocate_rcvblock_complete(p_adapter_t adapter, for (i = 0, Paddr = PhysicalAddress; i < SXG_RCV_DESCRIPTORS_PER_BLOCK; i++, Paddr += BufferSize, RcvDataBuffer += BufferSize) { - // + /* */ RcvDataBufferHdr = (PSXG_RCV_DATA_BUFFER_HDR) (RcvDataBuffer + SXG_RCV_DATA_BUFFER_HDR_OFFSET (BufferSize)); RcvDataBufferHdr->VirtualAddress = RcvDataBuffer; RcvDataBufferHdr->PhysicalAddress = Paddr; - RcvDataBufferHdr->State = SXG_BUFFER_UPSTREAM; // For FREE macro assertion + RcvDataBufferHdr->State = SXG_BUFFER_UPSTREAM; /* For FREE macro assertion */ RcvDataBufferHdr->Size = SXG_RCV_BUFFER_DATA_SIZE(BufferSize); @@ -3143,8 +3144,8 @@ static void sxg_allocate_rcvblock_complete(p_adapter_t adapter, } - // Place this entire block of memory on the AllRcvBlocks queue so it can be - // free later + /* Place this entire block of memory on the AllRcvBlocks queue so it can be */ + /* free later */ RcvBlockHdr = (PSXG_RCV_BLOCK_HDR) ((unsigned char *)RcvBlock + SXG_RCV_BLOCK_HDR_OFFSET(BufferSize)); @@ -3155,7 +3156,7 @@ static void sxg_allocate_rcvblock_complete(p_adapter_t adapter, InsertTailList(&adapter->AllRcvBlocks, &RcvBlockHdr->AllList); spin_unlock(&adapter->RcvQLock); - // Now free the contained receive data buffers that we initialized above + /* Now free the contained receive data buffers that we initialized above */ RcvDataBuffer = RcvBlock; for (i = 0, Paddr = PhysicalAddress; i < SXG_RCV_DESCRIPTORS_PER_BLOCK; @@ -3168,7 +3169,7 @@ static void sxg_allocate_rcvblock_complete(p_adapter_t adapter, spin_unlock(&adapter->RcvQLock); } - // Locate the descriptor block and put it on a separate free queue + /* Locate the descriptor block and put it on a separate free queue */ RcvDescriptorBlock = (PSXG_RCV_DESCRIPTOR_BLOCK) ((unsigned char *)RcvBlock + SXG_RCV_DESCRIPTOR_BLOCK_OFFSET @@ -3186,7 +3187,7 @@ static void sxg_allocate_rcvblock_complete(p_adapter_t adapter, adapter, RcvBlock, Length, 0); return; fail: - // Free any allocated resources + /* Free any allocated resources */ if (RcvBlock) { RcvDataBuffer = RcvBlock; for (i = 0; i < SXG_RCV_DESCRIPTORS_PER_BLOCK; @@ -3200,7 +3201,7 @@ static void sxg_allocate_rcvblock_complete(p_adapter_t adapter, pci_free_consistent(adapter->pcidev, Length, RcvBlock, PhysicalAddress); } - DBG_ERROR("%s: OUT OF RESOURCES\n", __FUNCTION__); + DBG_ERROR("%s: OUT OF RESOURCES\n", __func__); SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_IMPORTANT, "RcvAFail", adapter, adapter->FreeRcvBufferCount, adapter->FreeRcvBlockCount, adapter->AllRcvBlockCount); @@ -3230,7 +3231,7 @@ static void sxg_allocate_sgl_buffer_complete(p_adapter_t adapter, adapter->AllSglBufferCount++; memset(SxgSgl, 0, sizeof(SXG_SCATTER_GATHER)); SxgSgl->PhysicalAddress = PhysicalAddress; /* *PhysicalAddress; */ - SxgSgl->adapter = adapter; // Initialize backpointer once + SxgSgl->adapter = adapter; /* Initialize backpointer once */ InsertTailList(&adapter->AllSglBuffers, &SxgSgl->AllList); spin_unlock(&adapter->SglQLock); SxgSgl->State = SXG_BUFFER_BUSY; @@ -3244,14 +3245,14 @@ static unsigned char temp_mac_address[6] = static void sxg_adapter_set_hwaddr(p_adapter_t adapter) { -// DBG_ERROR ("%s ENTER card->config_set[%x] port[%d] physport[%d] funct#[%d]\n", __FUNCTION__, -// card->config_set, adapter->port, adapter->physport, adapter->functionnumber); -// -// sxg_dbg_macaddrs(adapter); +/* DBG_ERROR ("%s ENTER card->config_set[%x] port[%d] physport[%d] funct#[%d]\n", __func__, */ +/* card->config_set, adapter->port, adapter->physport, adapter->functionnumber); */ +/* */ +/* sxg_dbg_macaddrs(adapter); */ memcpy(adapter->macaddr, temp_mac_address, sizeof(SXG_CONFIG_MAC)); -// DBG_ERROR ("%s AFTER copying from config.macinfo into currmacaddr\n", __FUNCTION__); -// sxg_dbg_macaddrs(adapter); +/* DBG_ERROR ("%s AFTER copying from config.macinfo into currmacaddr\n", __func__); */ +/* sxg_dbg_macaddrs(adapter); */ if (!(adapter->currmacaddr[0] || adapter->currmacaddr[1] || adapter->currmacaddr[2] || @@ -3262,18 +3263,18 @@ static void sxg_adapter_set_hwaddr(p_adapter_t adapter) if (adapter->netdev) { memcpy(adapter->netdev->dev_addr, adapter->currmacaddr, 6); } -// DBG_ERROR ("%s EXIT port %d\n", __FUNCTION__, adapter->port); +/* DBG_ERROR ("%s EXIT port %d\n", __func__, adapter->port); */ sxg_dbg_macaddrs(adapter); } +#if XXXTODO static int sxg_mac_set_address(p_net_device dev, void *ptr) { -#if XXXTODO p_adapter_t adapter = (p_adapter_t) netdev_priv(dev); struct sockaddr *addr = ptr; - DBG_ERROR("%s ENTER (%s)\n", __FUNCTION__, adapter->netdev->name); + DBG_ERROR("%s ENTER (%s)\n", __func__, adapter->netdev->name); if (netif_running(dev)) { return -EBUSY; @@ -3282,22 +3283,22 @@ static int sxg_mac_set_address(p_net_device dev, void *ptr) return -EBUSY; } DBG_ERROR("sxg: %s (%s) curr %2.2X:%2.2X:%2.2X:%2.2X:%2.2X:%2.2X\n", - __FUNCTION__, adapter->netdev->name, adapter->currmacaddr[0], + __func__, adapter->netdev->name, adapter->currmacaddr[0], adapter->currmacaddr[1], adapter->currmacaddr[2], adapter->currmacaddr[3], adapter->currmacaddr[4], adapter->currmacaddr[5]); memcpy(dev->dev_addr, addr->sa_data, dev->addr_len); memcpy(adapter->currmacaddr, addr->sa_data, dev->addr_len); DBG_ERROR("sxg: %s (%s) new %2.2X:%2.2X:%2.2X:%2.2X:%2.2X:%2.2X\n", - __FUNCTION__, adapter->netdev->name, adapter->currmacaddr[0], + __func__, adapter->netdev->name, adapter->currmacaddr[0], adapter->currmacaddr[1], adapter->currmacaddr[2], adapter->currmacaddr[3], adapter->currmacaddr[4], adapter->currmacaddr[5]); sxg_config_set(adapter, TRUE); -#endif return 0; } +#endif /*****************************************************************************/ /************* SXG DRIVER FUNCTIONS (below) ********************************/ @@ -3321,77 +3322,77 @@ static int sxg_initialize_adapter(p_adapter_t adapter) SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "InitAdpt", adapter, 0, 0, 0); - RssIds = 1; // XXXTODO SXG_RSS_CPU_COUNT(adapter); + RssIds = 1; /* XXXTODO SXG_RSS_CPU_COUNT(adapter); */ IsrCount = adapter->MsiEnabled ? RssIds : 1; - // Sanity check SXG_UCODE_REGS structure definition to - // make sure the length is correct + /* Sanity check SXG_UCODE_REGS structure definition to */ + /* make sure the length is correct */ ASSERT(sizeof(SXG_UCODE_REGS) == SXG_REGISTER_SIZE_PER_CPU); - // Disable interrupts + /* Disable interrupts */ SXG_DISABLE_ALL_INTERRUPTS(adapter); - // Set MTU + /* Set MTU */ ASSERT((adapter->FrameSize == ETHERMAXFRAME) || (adapter->FrameSize == JUMBOMAXFRAME)); WRITE_REG(adapter->UcodeRegs[0].LinkMtu, adapter->FrameSize, TRUE); - // Set event ring base address and size + /* Set event ring base address and size */ WRITE_REG64(adapter, adapter->UcodeRegs[0].EventBase, adapter->PEventRings, 0); WRITE_REG(adapter->UcodeRegs[0].EventSize, EVENT_RING_SIZE, TRUE); - // Per-ISR initialization + /* Per-ISR initialization */ for (i = 0; i < IsrCount; i++) { u64 Addr; - // Set interrupt status pointer + /* Set interrupt status pointer */ Addr = adapter->PIsr + (i * sizeof(u32)); WRITE_REG64(adapter, adapter->UcodeRegs[i].Isp, Addr, i); } - // XMT ring zero index + /* XMT ring zero index */ WRITE_REG64(adapter, adapter->UcodeRegs[0].SPSendIndex, adapter->PXmtRingZeroIndex, 0); - // Per-RSS initialization + /* Per-RSS initialization */ for (i = 0; i < RssIds; i++) { - // Release all event ring entries to the Microcode + /* Release all event ring entries to the Microcode */ WRITE_REG(adapter->UcodeRegs[i].EventRelease, EVENT_RING_SIZE, TRUE); } - // Transmit ring base and size + /* Transmit ring base and size */ WRITE_REG64(adapter, adapter->UcodeRegs[0].XmtBase, adapter->PXmtRings, 0); WRITE_REG(adapter->UcodeRegs[0].XmtSize, SXG_XMT_RING_SIZE, TRUE); - // Receive ring base and size + /* Receive ring base and size */ WRITE_REG64(adapter, adapter->UcodeRegs[0].RcvBase, adapter->PRcvRings, 0); WRITE_REG(adapter->UcodeRegs[0].RcvSize, SXG_RCV_RING_SIZE, TRUE); - // Populate the card with receive buffers + /* Populate the card with receive buffers */ sxg_stock_rcv_buffers(adapter); - // Initialize checksum offload capabilities. At the moment - // we always enable IP and TCP receive checksums on the card. - // Depending on the checksum configuration specified by the - // user, we can choose to report or ignore the checksum - // information provided by the card. + /* Initialize checksum offload capabilities. At the moment */ + /* we always enable IP and TCP receive checksums on the card. */ + /* Depending on the checksum configuration specified by the */ + /* user, we can choose to report or ignore the checksum */ + /* information provided by the card. */ WRITE_REG(adapter->UcodeRegs[0].ReceiveChecksum, SXG_RCV_TCP_CSUM_ENABLED | SXG_RCV_IP_CSUM_ENABLED, TRUE); - // Initialize the MAC, XAUI - DBG_ERROR("sxg: %s ENTER sxg_initialize_link\n", __FUNCTION__); + /* Initialize the MAC, XAUI */ + DBG_ERROR("sxg: %s ENTER sxg_initialize_link\n", __func__); status = sxg_initialize_link(adapter); - DBG_ERROR("sxg: %s EXIT sxg_initialize_link status[%x]\n", __FUNCTION__, + DBG_ERROR("sxg: %s EXIT sxg_initialize_link status[%x]\n", __func__, status); if (status != STATUS_SUCCESS) { return (status); } - // Initialize Dead to FALSE. - // SlicCheckForHang or SlicDumpThread will take it from here. + /* Initialize Dead to FALSE. */ + /* SlicCheckForHang or SlicDumpThread will take it from here. */ adapter->Dead = FALSE; adapter->PingOutstanding = FALSE; @@ -3428,14 +3429,14 @@ static int sxg_fill_descriptor_block(p_adapter_t adapter, ASSERT(RcvDescriptorBlockHdr); - // If we don't have the resources to fill the descriptor block, - // return failure + /* If we don't have the resources to fill the descriptor block, */ + /* return failure */ if ((adapter->FreeRcvBufferCount < SXG_RCV_DESCRIPTORS_PER_BLOCK) || SXG_RING_FULL(RcvRingInfo)) { adapter->Stats.NoMem++; return (STATUS_FAILURE); } - // Get a ring descriptor command + /* Get a ring descriptor command */ SXG_GET_CMD(RingZero, RcvRingInfo, RingDescriptorCmd, RcvDescriptorBlockHdr); ASSERT(RingDescriptorCmd); @@ -3443,7 +3444,7 @@ static int sxg_fill_descriptor_block(p_adapter_t adapter, RcvDescriptorBlock = (PSXG_RCV_DESCRIPTOR_BLOCK) RcvDescriptorBlockHdr->VirtualAddress; - // Fill in the descriptor block + /* Fill in the descriptor block */ for (i = 0; i < SXG_RCV_DESCRIPTORS_PER_BLOCK; i++) { SXG_GET_RCV_DATA_BUFFER(adapter, RcvDataBufferHdr); ASSERT(RcvDataBufferHdr); @@ -3454,13 +3455,13 @@ static int sxg_fill_descriptor_block(p_adapter_t adapter, RcvDescriptorBlock->Descriptors[i].PhysicalAddress = RcvDataBufferHdr->PhysicalAddress; } - // Add the descriptor block to receive descriptor ring 0 + /* Add the descriptor block to receive descriptor ring 0 */ RingDescriptorCmd->Sgl = RcvDescriptorBlockHdr->PhysicalAddress; - // RcvBuffersOnCard is not protected via the receive lock (see - // sxg_process_event_queue) We don't want to grap a lock every time a - // buffer is returned to us, so we use atomic interlocked functions - // instead. + /* RcvBuffersOnCard is not protected via the receive lock (see */ + /* sxg_process_event_queue) We don't want to grap a lock every time a */ + /* buffer is returned to us, so we use atomic interlocked functions */ + /* instead. */ adapter->RcvBuffersOnCard += SXG_RCV_DESCRIPTORS_PER_BLOCK; SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "DscBlk", @@ -3490,10 +3491,10 @@ static void sxg_stock_rcv_buffers(p_adapter_t adapter) SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "StockBuf", adapter, adapter->RcvBuffersOnCard, adapter->FreeRcvBufferCount, adapter->AllRcvBlockCount); - // First, see if we've got less than our minimum threshold of - // receive buffers, there isn't an allocation in progress, and - // we haven't exceeded our maximum.. get another block of buffers - // None of this needs to be SMP safe. It's round numbers. + /* First, see if we've got less than our minimum threshold of */ + /* receive buffers, there isn't an allocation in progress, and */ + /* we haven't exceeded our maximum.. get another block of buffers */ + /* None of this needs to be SMP safe. It's round numbers. */ if ((adapter->FreeRcvBufferCount < SXG_MIN_RCV_DATA_BUFFERS) && (adapter->AllRcvBlockCount < SXG_MAX_RCV_BLOCKS) && (adapter->AllocationsPending == 0)) { @@ -3502,12 +3503,12 @@ static void sxg_stock_rcv_buffers(p_adapter_t adapter) ReceiveBufferSize), SXG_BUFFER_TYPE_RCV); } - // Now grab the RcvQLock lock and proceed + /* Now grab the RcvQLock lock and proceed */ spin_lock(&adapter->RcvQLock); while (adapter->RcvBuffersOnCard < SXG_RCV_DATA_BUFFERS) { PLIST_ENTRY _ple; - // Get a descriptor block + /* Get a descriptor block */ RcvDescriptorBlockHdr = NULL; if (adapter->FreeRcvBlockCount) { _ple = RemoveHeadList(&adapter->FreeRcvBlocks); @@ -3519,14 +3520,14 @@ static void sxg_stock_rcv_buffers(p_adapter_t adapter) } if (RcvDescriptorBlockHdr == NULL) { - // Bail out.. + /* Bail out.. */ adapter->Stats.NoMem++; break; } - // Fill in the descriptor block and give it to the card + /* Fill in the descriptor block and give it to the card */ if (sxg_fill_descriptor_block(adapter, RcvDescriptorBlockHdr) == STATUS_FAILURE) { - // Free the descriptor block + /* Free the descriptor block */ SXG_FREE_RCV_DESCRIPTOR_BLOCK(adapter, RcvDescriptorBlockHdr); break; @@ -3560,15 +3561,15 @@ static void sxg_complete_descriptor_blocks(p_adapter_t adapter, SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "CmpRBlks", adapter, Index, RcvRingInfo->Head, RcvRingInfo->Tail); - // Now grab the RcvQLock lock and proceed + /* Now grab the RcvQLock lock and proceed */ spin_lock(&adapter->RcvQLock); ASSERT(Index != RcvRingInfo->Tail); while (RcvRingInfo->Tail != Index) { - // - // Locate the current Cmd (ring descriptor entry), and - // associated receive descriptor block, and advance - // the tail - // + /* */ + /* Locate the current Cmd (ring descriptor entry), and */ + /* associated receive descriptor block, and advance */ + /* the tail */ + /* */ SXG_RETURN_CMD(RingZero, RcvRingInfo, RingDescriptorCmd, RcvDescriptorBlockHdr); @@ -3576,12 +3577,12 @@ static void sxg_complete_descriptor_blocks(p_adapter_t adapter, RcvRingInfo->Head, RcvRingInfo->Tail, RingDescriptorCmd, RcvDescriptorBlockHdr); - // Clear the SGL field + /* Clear the SGL field */ RingDescriptorCmd->Sgl = 0; - // Attempt to refill it and hand it right back to the - // card. If we fail to refill it, free the descriptor block - // header. The card will be restocked later via the - // RcvBuffersOnCard test + /* Attempt to refill it and hand it right back to the */ + /* card. If we fail to refill it, free the descriptor block */ + /* header. The card will be restocked later via the */ + /* RcvBuffersOnCard test */ if (sxg_fill_descriptor_block(adapter, RcvDescriptorBlockHdr) == STATUS_FAILURE) { SXG_FREE_RCV_DESCRIPTOR_BLOCK(adapter, diff --git a/drivers/staging/sxg/sxg_os.h b/drivers/staging/sxg/sxg_os.h index 26fb0ffafa5c..01182689aaba 100644 --- a/drivers/staging/sxg/sxg_os.h +++ b/drivers/staging/sxg/sxg_os.h @@ -44,7 +44,6 @@ #define FALSE (0) #define TRUE (1) - typedef struct _LIST_ENTRY { struct _LIST_ENTRY *nle_flink; struct _LIST_ENTRY *nle_blink; @@ -69,35 +68,32 @@ typedef struct _LIST_ENTRY { /* These two have to be inlined since they return things. */ -static __inline PLIST_ENTRY -RemoveHeadList(list_entry *l) +static __inline PLIST_ENTRY RemoveHeadList(list_entry * l) { - list_entry *f; - list_entry *e; + list_entry *f; + list_entry *e; - e = l->nle_flink; - f = e->nle_flink; - l->nle_flink = f; - f->nle_blink = l; + e = l->nle_flink; + f = e->nle_flink; + l->nle_flink = f; + f->nle_blink = l; - return (e); + return (e); } -static __inline PLIST_ENTRY -RemoveTailList(list_entry *l) +static __inline PLIST_ENTRY RemoveTailList(list_entry * l) { - list_entry *b; - list_entry *e; + list_entry *b; + list_entry *e; - e = l->nle_blink; - b = e->nle_blink; - l->nle_blink = b; - b->nle_flink = l; + e = l->nle_blink; + b = e->nle_blink; + l->nle_blink = b; + b->nle_flink = l; - return (e); + return (e); } - #define InsertTailList(l, e) \ do { \ list_entry *b; \ @@ -120,7 +116,6 @@ RemoveTailList(list_entry *l) (l)->nle_flink = (e); \ } while (0) - #define ATK_DEBUG 1 #if ATK_DEBUG @@ -133,7 +128,6 @@ RemoveTailList(list_entry *l) #define SLIC_TIMESTAMP(value) #endif - /****************** SXG DEFINES *****************************************/ #ifdef ATKDBG @@ -150,5 +144,4 @@ RemoveTailList(list_entry *l) #define WRITE_REG64(a,reg,value,cpu) sxg_reg64_write((a),(®),(value),(cpu)) #define READ_REG(reg,value) (value) = readl((void __iomem *)(®)) -#endif /* _SLIC_OS_SPECIFIC_H_ */ - +#endif /* _SLIC_OS_SPECIFIC_H_ */ diff --git a/drivers/staging/sxg/sxgdbg.h b/drivers/staging/sxg/sxgdbg.h index cfb6c7c77a9e..4522b8d71495 100644 --- a/drivers/staging/sxg/sxgdbg.h +++ b/drivers/staging/sxg/sxgdbg.h @@ -58,7 +58,7 @@ { \ if (!(a)) { \ DBG_ERROR("ASSERT() Failure: file %s, function %s line %d\n",\ - __FILE__, __FUNCTION__, __LINE__); \ + __FILE__, __func__, __LINE__); \ } \ } #endif diff --git a/drivers/staging/sxg/sxghif.h b/drivers/staging/sxg/sxghif.h index ed26ceaa1315..88bffbaa3be8 100644 --- a/drivers/staging/sxg/sxghif.h +++ b/drivers/staging/sxg/sxghif.h @@ -14,119 +14,119 @@ *******************************************************************************/ typedef struct _SXG_UCODE_REGS { // Address 0 - 0x3F = Command codes 0-15 for TCB 0. Excode 0 - u32 Icr; // Code = 0 (extended), ExCode = 0 - Int control - u32 RsvdReg1; // Code = 1 - TOE -NA - u32 RsvdReg2; // Code = 2 - TOE -NA - u32 RsvdReg3; // Code = 3 - TOE -NA - u32 RsvdReg4; // Code = 4 - TOE -NA - u32 RsvdReg5; // Code = 5 - TOE -NA - u32 CardUp; // Code = 6 - Microcode initialized when 1 - u32 RsvdReg7; // Code = 7 - TOE -NA - u32 CodeNotUsed[8]; // Codes 8-15 not used. ExCode = 0 + u32 Icr; // Code = 0 (extended), ExCode = 0 - Int control + u32 RsvdReg1; // Code = 1 - TOE -NA + u32 RsvdReg2; // Code = 2 - TOE -NA + u32 RsvdReg3; // Code = 3 - TOE -NA + u32 RsvdReg4; // Code = 4 - TOE -NA + u32 RsvdReg5; // Code = 5 - TOE -NA + u32 CardUp; // Code = 6 - Microcode initialized when 1 + u32 RsvdReg7; // Code = 7 - TOE -NA + u32 CodeNotUsed[8]; // Codes 8-15 not used. ExCode = 0 // This brings us to ExCode 1 at address 0x40 = Interrupt status pointer - u32 Isp; // Code = 0 (extended), ExCode = 1 - u32 PadEx1[15]; // Codes 1-15 not used with extended codes + u32 Isp; // Code = 0 (extended), ExCode = 1 + u32 PadEx1[15]; // Codes 1-15 not used with extended codes // ExCode 2 = Interrupt Status Register - u32 Isr; // Code = 0 (extended), ExCode = 2 - u32 PadEx2[15]; + u32 Isr; // Code = 0 (extended), ExCode = 2 + u32 PadEx2[15]; // ExCode 3 = Event base register. Location of event rings - u32 EventBase; // Code = 0 (extended), ExCode = 3 - u32 PadEx3[15]; + u32 EventBase; // Code = 0 (extended), ExCode = 3 + u32 PadEx3[15]; // ExCode 4 = Event ring size - u32 EventSize; // Code = 0 (extended), ExCode = 4 - u32 PadEx4[15]; + u32 EventSize; // Code = 0 (extended), ExCode = 4 + u32 PadEx4[15]; // ExCode 5 = TCB Buffers base address - u32 TcbBase; // Code = 0 (extended), ExCode = 5 - u32 PadEx5[15]; + u32 TcbBase; // Code = 0 (extended), ExCode = 5 + u32 PadEx5[15]; // ExCode 6 = TCB Composite Buffers base address - u32 TcbCompBase; // Code = 0 (extended), ExCode = 6 - u32 PadEx6[15]; + u32 TcbCompBase; // Code = 0 (extended), ExCode = 6 + u32 PadEx6[15]; // ExCode 7 = Transmit ring base address - u32 XmtBase; // Code = 0 (extended), ExCode = 7 - u32 PadEx7[15]; + u32 XmtBase; // Code = 0 (extended), ExCode = 7 + u32 PadEx7[15]; // ExCode 8 = Transmit ring size - u32 XmtSize; // Code = 0 (extended), ExCode = 8 - u32 PadEx8[15]; + u32 XmtSize; // Code = 0 (extended), ExCode = 8 + u32 PadEx8[15]; // ExCode 9 = Receive ring base address - u32 RcvBase; // Code = 0 (extended), ExCode = 9 - u32 PadEx9[15]; + u32 RcvBase; // Code = 0 (extended), ExCode = 9 + u32 PadEx9[15]; // ExCode 10 = Receive ring size - u32 RcvSize; // Code = 0 (extended), ExCode = 10 - u32 PadEx10[15]; + u32 RcvSize; // Code = 0 (extended), ExCode = 10 + u32 PadEx10[15]; // ExCode 11 = Read EEPROM Config - u32 Config; // Code = 0 (extended), ExCode = 11 - u32 PadEx11[15]; + u32 Config; // Code = 0 (extended), ExCode = 11 + u32 PadEx11[15]; // ExCode 12 = Multicast bits 31:0 - u32 McastLow; // Code = 0 (extended), ExCode = 12 - u32 PadEx12[15]; + u32 McastLow; // Code = 0 (extended), ExCode = 12 + u32 PadEx12[15]; // ExCode 13 = Multicast bits 63:32 - u32 McastHigh; // Code = 0 (extended), ExCode = 13 - u32 PadEx13[15]; + u32 McastHigh; // Code = 0 (extended), ExCode = 13 + u32 PadEx13[15]; // ExCode 14 = Ping - u32 Ping; // Code = 0 (extended), ExCode = 14 - u32 PadEx14[15]; + u32 Ping; // Code = 0 (extended), ExCode = 14 + u32 PadEx14[15]; // ExCode 15 = Link MTU - u32 LinkMtu; // Code = 0 (extended), ExCode = 15 - u32 PadEx15[15]; + u32 LinkMtu; // Code = 0 (extended), ExCode = 15 + u32 PadEx15[15]; // ExCode 16 = Download synchronization - u32 LoadSync; // Code = 0 (extended), ExCode = 16 - u32 PadEx16[15]; + u32 LoadSync; // Code = 0 (extended), ExCode = 16 + u32 PadEx16[15]; // ExCode 17 = Upper DRAM address bits on 32-bit systems - u32 Upper; // Code = 0 (extended), ExCode = 17 - u32 PadEx17[15]; + u32 Upper; // Code = 0 (extended), ExCode = 17 + u32 PadEx17[15]; // ExCode 18 = Slowpath Send Index Address - u32 SPSendIndex; // Code = 0 (extended), ExCode = 18 - u32 PadEx18[15]; - u32 RsvdXF; // Code = 0 (extended), ExCode = 19 - u32 PadEx19[15]; + u32 SPSendIndex; // Code = 0 (extended), ExCode = 18 + u32 PadEx18[15]; + u32 RsvdXF; // Code = 0 (extended), ExCode = 19 + u32 PadEx19[15]; // ExCode 20 = Aggregation - u32 Aggregation; // Code = 0 (extended), ExCode = 20 - u32 PadEx20[15]; + u32 Aggregation; // Code = 0 (extended), ExCode = 20 + u32 PadEx20[15]; // ExCode 21 = Receive MDL push timer - u32 PushTicks; // Code = 0 (extended), ExCode = 21 - u32 PadEx21[15]; + u32 PushTicks; // Code = 0 (extended), ExCode = 21 + u32 PadEx21[15]; // ExCode 22 = TOE NA - u32 AckFrequency; // Code = 0 (extended), ExCode = 22 - u32 PadEx22[15]; + u32 AckFrequency; // Code = 0 (extended), ExCode = 22 + u32 PadEx22[15]; // ExCode 23 = TOE NA - u32 RsvdReg23; - u32 PadEx23[15]; + u32 RsvdReg23; + u32 PadEx23[15]; // ExCode 24 = TOE NA - u32 RsvdReg24; - u32 PadEx24[15]; + u32 RsvdReg24; + u32 PadEx24[15]; // ExCode 25 = TOE NA - u32 RsvdReg25; // Code = 0 (extended), ExCode = 25 - u32 PadEx25[15]; + u32 RsvdReg25; // Code = 0 (extended), ExCode = 25 + u32 PadEx25[15]; // ExCode 26 = Receive checksum requirements - u32 ReceiveChecksum; // Code = 0 (extended), ExCode = 26 - u32 PadEx26[15]; + u32 ReceiveChecksum; // Code = 0 (extended), ExCode = 26 + u32 PadEx26[15]; // ExCode 27 = RSS Requirements - u32 Rss; // Code = 0 (extended), ExCode = 27 - u32 PadEx27[15]; + u32 Rss; // Code = 0 (extended), ExCode = 27 + u32 PadEx27[15]; // ExCode 28 = RSS Table - u32 RssTable; // Code = 0 (extended), ExCode = 28 - u32 PadEx28[15]; + u32 RssTable; // Code = 0 (extended), ExCode = 28 + u32 PadEx28[15]; // ExCode 29 = Event ring release entries - u32 EventRelease; // Code = 0 (extended), ExCode = 29 - u32 PadEx29[15]; + u32 EventRelease; // Code = 0 (extended), ExCode = 29 + u32 PadEx29[15]; // ExCode 30 = Number of receive bufferlist commands on ring 0 - u32 RcvCmd; // Code = 0 (extended), ExCode = 30 - u32 PadEx30[15]; + u32 RcvCmd; // Code = 0 (extended), ExCode = 30 + u32 PadEx30[15]; // ExCode 31 = slowpath transmit command - Data[31:0] = 1 - u32 XmtCmd; // Code = 0 (extended), ExCode = 31 - u32 PadEx31[15]; + u32 XmtCmd; // Code = 0 (extended), ExCode = 31 + u32 PadEx31[15]; // ExCode 32 = Dump command - u32 DumpCmd; // Code = 0 (extended), ExCode = 32 - u32 PadEx32[15]; + u32 DumpCmd; // Code = 0 (extended), ExCode = 32 + u32 PadEx32[15]; // ExCode 33 = Debug command - u32 DebugCmd; // Code = 0 (extended), ExCode = 33 - u32 PadEx33[15]; + u32 DebugCmd; // Code = 0 (extended), ExCode = 33 + u32 PadEx33[15]; // There are 128 possible extended commands - each of account for 16 // words (including the non-relevent base command codes 1-15). // Pad for the remainder of these here to bring us to the next CPU // base. As extended codes are added, reduce the first array value in // the following field - u32 PadToNextCpu[94][16]; // 94 = 128 - 34 (34 = Excodes 0 - 33) + u32 PadToNextCpu[94][16]; // 94 = 128 - 34 (34 = Excodes 0 - 33) } SXG_UCODE_REGS, *PSXG_UCODE_REGS; // Interrupt control register (0) values @@ -141,7 +141,7 @@ typedef struct _SXG_UCODE_REGS { // The Microcode supports up to 16 RSS queues #define SXG_MAX_RSS 16 -#define SXG_MAX_RSS_TABLE_SIZE 256 // 256-byte max +#define SXG_MAX_RSS_TABLE_SIZE 256 // 256-byte max #define SXG_RSS_TCP6 0x00000001 // RSS TCP over IPv6 #define SXG_RSS_TCP4 0x00000002 // RSS TCP over IPv4 @@ -170,16 +170,16 @@ typedef struct _SXG_UCODE_REGS { * SXG_UCODE_REGS definition above */ typedef struct _SXG_TCB_REGS { - u32 ExCode; /* Extended codes - see SXG_UCODE_REGS */ - u32 Xmt; /* Code = 1 - # of Xmt descriptors added to ring */ - u32 Rcv; /* Code = 2 - # of Rcv descriptors added to ring */ - u32 Rsvd1; /* Code = 3 - TOE NA */ - u32 Rsvd2; /* Code = 4 - TOE NA */ - u32 Rsvd3; /* Code = 5 - TOE NA */ - u32 Invalid; /* Code = 6 - Reserved for "CardUp" see above */ - u32 Rsvd4; /* Code = 7 - TOE NA */ - u32 Rsvd5; /* Code = 8 - TOE NA */ - u32 Pad[7]; /* Codes 8-15 - Not used. */ + u32 ExCode; /* Extended codes - see SXG_UCODE_REGS */ + u32 Xmt; /* Code = 1 - # of Xmt descriptors added to ring */ + u32 Rcv; /* Code = 2 - # of Rcv descriptors added to ring */ + u32 Rsvd1; /* Code = 3 - TOE NA */ + u32 Rsvd2; /* Code = 4 - TOE NA */ + u32 Rsvd3; /* Code = 5 - TOE NA */ + u32 Invalid; /* Code = 6 - Reserved for "CardUp" see above */ + u32 Rsvd4; /* Code = 7 - TOE NA */ + u32 Rsvd5; /* Code = 8 - TOE NA */ + u32 Pad[7]; /* Codes 8-15 - Not used. */ } SXG_TCB_REGS, *PSXG_TCB_REGS; /*************************************************************************** @@ -273,27 +273,27 @@ typedef struct _SXG_TCB_REGS { */ #pragma pack(push, 1) typedef struct _SXG_EVENT { - u32 Pad[1]; // not used - u32 SndUna; // SndUna value - u32 Resid; // receive MDL resid + u32 Pad[1]; // not used + u32 SndUna; // SndUna value + u32 Resid; // receive MDL resid union { - void * HostHandle; // Receive host handle - u32 Rsvd1; // TOE NA + void *HostHandle; // Receive host handle + u32 Rsvd1; // TOE NA struct { - u32 NotUsed; - u32 Rsvd2; // TOE NA + u32 NotUsed; + u32 Rsvd2; // TOE NA } Flush; }; - u32 Toeplitz; // RSS Toeplitz hash + u32 Toeplitz; // RSS Toeplitz hash union { - ushort Rsvd3; // TOE NA - ushort HdrOffset; // Slowpath + ushort Rsvd3; // TOE NA + ushort HdrOffset; // Slowpath }; - ushort Length; // - unsigned char Rsvd4; // TOE NA - unsigned char Code; // Event code - unsigned char CommandIndex; // New ring index - unsigned char Status; // Event status + ushort Length; // + unsigned char Rsvd4; // TOE NA + unsigned char Code; // Event code + unsigned char CommandIndex; // New ring index + unsigned char Status; // Event status } SXG_EVENT, *PSXG_EVENT; #pragma pack(pop) @@ -318,12 +318,12 @@ typedef struct _SXG_EVENT { // Event ring // Size must be power of 2, between 128 and 16k #define EVENT_RING_SIZE 4096 // ?? -#define EVENT_RING_BATCH 16 // Hand entries back 16 at a time. -#define EVENT_BATCH_LIMIT 256 // Stop processing events after 256 (16 * 16) +#define EVENT_RING_BATCH 16 // Hand entries back 16 at a time. +#define EVENT_BATCH_LIMIT 256 // Stop processing events after 256 (16 * 16) typedef struct _SXG_EVENT_RING { - SXG_EVENT Ring[EVENT_RING_SIZE]; -}SXG_EVENT_RING, *PSXG_EVENT_RING; + SXG_EVENT Ring[EVENT_RING_SIZE]; +} SXG_EVENT_RING, *PSXG_EVENT_RING; /*************************************************************************** * @@ -341,7 +341,7 @@ typedef struct _SXG_EVENT_RING { #define SXG_TCB_PER_BUCKET 16 #define SXG_TCB_BUCKET_MASK 0xFF0 // Bucket portion of TCB ID #define SXG_TCB_ELEMENT_MASK 0x00F // Element within bucket -#define SXG_TCB_BUCKETS 256 // 256 * 16 = 4k +#define SXG_TCB_BUCKETS 256 // 256 * 16 = 4k #define SXG_TCB_BUFFER_SIZE 512 // ASSERT format is correct @@ -368,7 +368,6 @@ typedef struct _SXG_EVENT_RING { &(_TcpObject)->CompBuffer->Frame.HasVlan.TcpIp6.Ip : \ &(_TcpObject)->CompBuffer->Frame.NoVlan.TcpIp6.Ip - #if DBG // Horrible kludge to distinguish dumb-nic, slowpath, and // fastpath traffic. Decrement the HopLimit by one @@ -396,16 +395,16 @@ typedef struct _SXG_EVENT_RING { * Receive and transmit rings ***************************************************************************/ #define SXG_MAX_RING_SIZE 256 -#define SXG_XMT_RING_SIZE 128 // Start with 128 -#define SXG_RCV_RING_SIZE 128 // Start with 128 +#define SXG_XMT_RING_SIZE 128 // Start with 128 +#define SXG_RCV_RING_SIZE 128 // Start with 128 #define SXG_MAX_ENTRIES 4096 // Structure and macros to manage a ring typedef struct _SXG_RING_INFO { - unsigned char Head; // Where we add entries - Note unsigned char:RING_SIZE - unsigned char Tail; // Where we pull off completed entries - ushort Size; // Ring size - Must be multiple of 2 - void * Context[SXG_MAX_RING_SIZE]; // Shadow ring + unsigned char Head; // Where we add entries - Note unsigned char:RING_SIZE + unsigned char Tail; // Where we pull off completed entries + ushort Size; // Ring size - Must be multiple of 2 + void *Context[SXG_MAX_RING_SIZE]; // Shadow ring } SXG_RING_INFO, *PSXG_RING_INFO; #define SXG_INITIALIZE_RING(_ring, _size) { \ @@ -483,40 +482,40 @@ typedef struct _SXG_RING_INFO { */ #pragma pack(push, 1) typedef struct _SXG_CMD { - dma_addr_t Sgl; // Physical address of SGL + dma_addr_t Sgl; // Physical address of SGL union { struct { - dma64_addr_t FirstSgeAddress;// Address of first SGE - u32 FirstSgeLength; // Length of first SGE + dma64_addr_t FirstSgeAddress; // Address of first SGE + u32 FirstSgeLength; // Length of first SGE union { - u32 Rsvd1; // TOE NA - u32 SgeOffset; // Slowpath - 2nd SGE offset - u32 Resid; // MDL completion - clobbers update + u32 Rsvd1; // TOE NA + u32 SgeOffset; // Slowpath - 2nd SGE offset + u32 Resid; // MDL completion - clobbers update }; union { - u32 TotalLength; // Total transfer length - u32 Mss; // LSO MSS + u32 TotalLength; // Total transfer length + u32 Mss; // LSO MSS }; } Buffer; }; union { struct { - unsigned char Flags:4; // slowpath flags - unsigned char IpHl:4; // Ip header length (>>2) - unsigned char MacLen; // Mac header len + unsigned char Flags:4; // slowpath flags + unsigned char IpHl:4; // Ip header length (>>2) + unsigned char MacLen; // Mac header len } CsumFlags; struct { - ushort Flags:4; // slowpath flags - ushort TcpHdrOff:7; // TCP - ushort MacLen:5; // Mac header len + ushort Flags:4; // slowpath flags + ushort TcpHdrOff:7; // TCP + ushort MacLen:5; // Mac header len } LsoFlags; - ushort Flags; // flags + ushort Flags; // flags }; union { - ushort SgEntries; // SG entry count including first sge + ushort SgEntries; // SG entry count including first sge struct { - unsigned char Status; // Copied from event status - unsigned char NotUsed; + unsigned char Status; // Copied from event status + unsigned char NotUsed; } Status; }; } SXG_CMD, *PSXG_CMD; @@ -524,8 +523,8 @@ typedef struct _SXG_CMD { #pragma pack(push, 1) typedef struct _VLAN_HDR { - ushort VlanTci; - ushort VlanTpid; + ushort VlanTci; + ushort VlanTpid; } VLAN_HDR, *PVLAN_HDR; #pragma pack(pop) @@ -561,16 +560,16 @@ typedef struct _VLAN_HDR { * */ // Slowpath CMD flags -#define SXG_SLOWCMD_CSUM_IP 0x01 // Checksum IP -#define SXG_SLOWCMD_CSUM_TCP 0x02 // Checksum TCP -#define SXG_SLOWCMD_LSO 0x04 // Large segment send +#define SXG_SLOWCMD_CSUM_IP 0x01 // Checksum IP +#define SXG_SLOWCMD_CSUM_TCP 0x02 // Checksum TCP +#define SXG_SLOWCMD_LSO 0x04 // Large segment send typedef struct _SXG_XMT_RING { - SXG_CMD Descriptors[SXG_XMT_RING_SIZE]; + SXG_CMD Descriptors[SXG_XMT_RING_SIZE]; } SXG_XMT_RING, *PSXG_XMT_RING; typedef struct _SXG_RCV_RING { - SXG_CMD Descriptors[SXG_RCV_RING_SIZE]; + SXG_CMD Descriptors[SXG_RCV_RING_SIZE]; } SXG_RCV_RING, *PSXG_RCV_RING; /*************************************************************************** @@ -578,8 +577,8 @@ typedef struct _SXG_RCV_RING { * shared memory allocation ***************************************************************************/ typedef enum { - SXG_BUFFER_TYPE_RCV, // Receive buffer - SXG_BUFFER_TYPE_SGL // SGL buffer + SXG_BUFFER_TYPE_RCV, // Receive buffer + SXG_BUFFER_TYPE_SGL // SGL buffer } SXG_BUFFER_TYPE; // State for SXG buffers @@ -668,60 +667,60 @@ typedef enum { #define SXG_RCV_DATA_BUFFERS 4096 // Amount to give to the card #define SXG_INITIAL_RCV_DATA_BUFFERS 8192 // Initial pool of buffers #define SXG_MIN_RCV_DATA_BUFFERS 2048 // Minimum amount and when to get more -#define SXG_MAX_RCV_BLOCKS 128 // = 16384 receive buffers +#define SXG_MAX_RCV_BLOCKS 128 // = 16384 receive buffers // Receive buffer header typedef struct _SXG_RCV_DATA_BUFFER_HDR { - dma_addr_t PhysicalAddress; // Buffer physical address + dma_addr_t PhysicalAddress; // Buffer physical address // Note - DO NOT USE the VirtualAddress field to locate data. // Use the sxg.h:SXG_RECEIVE_DATA_LOCATION macro instead. - void *VirtualAddress; // Start of buffer - LIST_ENTRY FreeList; // Free queue of buffers - struct _SXG_RCV_DATA_BUFFER_HDR *Next; // Fastpath data buffer queue - u32 Size; // Buffer size - u32 ByteOffset; // See SXG_RESTORE_MDL_OFFSET - unsigned char State; // See SXG_BUFFER state above - unsigned char Status; // Event status (to log PUSH) - struct sk_buff * skb; // Double mapped (nbl and pkt) + void *VirtualAddress; // Start of buffer + LIST_ENTRY FreeList; // Free queue of buffers + struct _SXG_RCV_DATA_BUFFER_HDR *Next; // Fastpath data buffer queue + u32 Size; // Buffer size + u32 ByteOffset; // See SXG_RESTORE_MDL_OFFSET + unsigned char State; // See SXG_BUFFER state above + unsigned char Status; // Event status (to log PUSH) + struct sk_buff *skb; // Double mapped (nbl and pkt) } SXG_RCV_DATA_BUFFER_HDR, *PSXG_RCV_DATA_BUFFER_HDR; // SxgSlowReceive uses the PACKET (skb) contained // in the SXG_RCV_DATA_BUFFER_HDR when indicating dumb-nic data #define SxgDumbRcvPacket skb -#define SXG_RCV_DATA_HDR_SIZE 256 // Space for SXG_RCV_DATA_BUFFER_HDR +#define SXG_RCV_DATA_HDR_SIZE 256 // Space for SXG_RCV_DATA_BUFFER_HDR #define SXG_RCV_DATA_BUFFER_SIZE 2048 // Non jumbo = 2k including HDR #define SXG_RCV_JUMBO_BUFFER_SIZE 10240 // jumbo = 10k including HDR // Receive data descriptor typedef struct _SXG_RCV_DATA_DESCRIPTOR { union { - struct sk_buff * VirtualAddress; // Host handle - u64 ForceTo8Bytes; // Force x86 to 8-byte boundary + struct sk_buff *VirtualAddress; // Host handle + u64 ForceTo8Bytes; // Force x86 to 8-byte boundary }; - dma_addr_t PhysicalAddress; + dma_addr_t PhysicalAddress; } SXG_RCV_DATA_DESCRIPTOR, *PSXG_RCV_DATA_DESCRIPTOR; // Receive descriptor block #define SXG_RCV_DESCRIPTORS_PER_BLOCK 128 #define SXG_RCV_DESCRIPTOR_BLOCK_SIZE 2048 // For sanity check typedef struct _SXG_RCV_DESCRIPTOR_BLOCK { - SXG_RCV_DATA_DESCRIPTOR Descriptors[SXG_RCV_DESCRIPTORS_PER_BLOCK]; + SXG_RCV_DATA_DESCRIPTOR Descriptors[SXG_RCV_DESCRIPTORS_PER_BLOCK]; } SXG_RCV_DESCRIPTOR_BLOCK, *PSXG_RCV_DESCRIPTOR_BLOCK; // Receive descriptor block header typedef struct _SXG_RCV_DESCRIPTOR_BLOCK_HDR { - void * VirtualAddress; // Start of 2k buffer - dma_addr_t PhysicalAddress; // ..and it's physical address - LIST_ENTRY FreeList; // Free queue of descriptor blocks - unsigned char State; // See SXG_BUFFER state above + void *VirtualAddress; // Start of 2k buffer + dma_addr_t PhysicalAddress; // ..and it's physical address + LIST_ENTRY FreeList; // Free queue of descriptor blocks + unsigned char State; // See SXG_BUFFER state above } SXG_RCV_DESCRIPTOR_BLOCK_HDR, *PSXG_RCV_DESCRIPTOR_BLOCK_HDR; // Receive block header typedef struct _SXG_RCV_BLOCK_HDR { - void * VirtualAddress; // Start of virtual memory - dma_addr_t PhysicalAddress; // ..and it's physical address - LIST_ENTRY AllList; // Queue of all SXG_RCV_BLOCKS + void *VirtualAddress; // Start of virtual memory + dma_addr_t PhysicalAddress; // ..and it's physical address + LIST_ENTRY AllList; // Queue of all SXG_RCV_BLOCKS } SXG_RCV_BLOCK_HDR, *PSXG_RCV_BLOCK_HDR; // Macros to determine data structure offsets into receive block @@ -747,8 +746,8 @@ typedef struct _SXG_RCV_BLOCK_HDR { // Use the miniport reserved portion of the NBL to locate // our SXG_RCV_DATA_BUFFER_HDR structure. typedef struct _SXG_RCV_NBL_RESERVED { - PSXG_RCV_DATA_BUFFER_HDR RcvDataBufferHdr; - void * Available; + PSXG_RCV_DATA_BUFFER_HDR RcvDataBufferHdr; + void *Available; } SXG_RCV_NBL_RESERVED, *PSXG_RCV_NBL_RESERVED; #define SXG_RCV_NBL_BUFFER_HDR(_NBL) (((PSXG_RCV_NBL_RESERVED)NET_BUFFER_LIST_MINIPORT_RESERVED(_NBL))->RcvDataBufferHdr) @@ -760,12 +759,11 @@ typedef struct _SXG_RCV_NBL_RESERVED { #define SXG_MIN_SGL_BUFFERS 2048 // Minimum amount and when to get more #define SXG_MAX_SGL_BUFFERS 16384 // Maximum to allocate (note ADAPT:ushort) - // Self identifying structure type typedef enum _SXG_SGL_TYPE { - SXG_SGL_DUMB, // Dumb NIC SGL - SXG_SGL_SLOW, // Slowpath protocol header - see below - SXG_SGL_CHIMNEY // Chimney offload SGL + SXG_SGL_DUMB, // Dumb NIC SGL + SXG_SGL_SLOW, // Slowpath protocol header - see below + SXG_SGL_CHIMNEY // Chimney offload SGL } SXG_SGL_TYPE, PSXG_SGL_TYPE; // Note - the description below is Microsoft specific @@ -774,14 +772,14 @@ typedef enum _SXG_SGL_TYPE { // for the SCATTER_GATHER_LIST portion of the SXG_SCATTER_GATHER data structure. // The following considerations apply when setting this value: // - First, the Sahara card is designed to read the Microsoft SGL structure -// straight out of host memory. This means that the SGL must reside in -// shared memory. If the length here is smaller than the SGL for the -// NET_BUFFER, then NDIS will allocate its own buffer. The buffer -// that NDIS allocates is not in shared memory, so when this happens, -// the SGL will need to be copied to a set of SXG_SCATTER_GATHER buffers. -// In other words.. we don't want this value to be too small. +// straight out of host memory. This means that the SGL must reside in +// shared memory. If the length here is smaller than the SGL for the +// NET_BUFFER, then NDIS will allocate its own buffer. The buffer +// that NDIS allocates is not in shared memory, so when this happens, +// the SGL will need to be copied to a set of SXG_SCATTER_GATHER buffers. +// In other words.. we don't want this value to be too small. // - On the other hand.. we're allocating up to 16k of these things. If -// we make this too big, we start to consume a ton of memory.. +// we make this too big, we start to consume a ton of memory.. // At the moment, I'm going to limit the number of SG entries to 150. // If each entry maps roughly 4k, then this should cover roughly 600kB // NET_BUFFERs. Furthermore, since each entry is 24 bytes, the total @@ -801,24 +799,23 @@ typedef enum _SXG_SGL_TYPE { // the SGL. The following structure defines an x64 // formatted SGL entry typedef struct _SXG_X64_SGE { - dma64_addr_t Address; // same as wdm.h - u32 Length; // same as wdm.h - u32 CompilerPad;// The compiler pads to 8-bytes - u64 Reserved; // u32 * in wdm.h. Force to 8 bytes + dma64_addr_t Address; // same as wdm.h + u32 Length; // same as wdm.h + u32 CompilerPad; // The compiler pads to 8-bytes + u64 Reserved; // u32 * in wdm.h. Force to 8 bytes } SXG_X64_SGE, *PSXG_X64_SGE; typedef struct _SCATTER_GATHER_ELEMENT { - dma64_addr_t Address; // same as wdm.h - u32 Length; // same as wdm.h - u32 CompilerPad;// The compiler pads to 8-bytes - u64 Reserved; // u32 * in wdm.h. Force to 8 bytes + dma64_addr_t Address; // same as wdm.h + u32 Length; // same as wdm.h + u32 CompilerPad; // The compiler pads to 8-bytes + u64 Reserved; // u32 * in wdm.h. Force to 8 bytes } SCATTER_GATHER_ELEMENT, *PSCATTER_GATHER_ELEMENT; - typedef struct _SCATTER_GATHER_LIST { - u32 NumberOfElements; - u32 * Reserved; - SCATTER_GATHER_ELEMENT Elements[]; + u32 NumberOfElements; + u32 *Reserved; + SCATTER_GATHER_ELEMENT Elements[]; } SCATTER_GATHER_LIST, *PSCATTER_GATHER_LIST; // The card doesn't care about anything except elements, so @@ -826,26 +823,26 @@ typedef struct _SCATTER_GATHER_LIST { // SGL structure. But redefine from wdm.h:SCATTER_GATHER_LIST so // we can specify SXG_X64_SGE and define a fixed number of elements typedef struct _SXG_X64_SGL { - u32 NumberOfElements; - u32 * Reserved; - SXG_X64_SGE Elements[SXG_SGL_ENTRIES]; + u32 NumberOfElements; + u32 *Reserved; + SXG_X64_SGE Elements[SXG_SGL_ENTRIES]; } SXG_X64_SGL, *PSXG_X64_SGL; typedef struct _SXG_SCATTER_GATHER { - SXG_SGL_TYPE Type; // FIRST! Dumb-nic or offload - void * adapter; // Back pointer to adapter - LIST_ENTRY FreeList; // Free SXG_SCATTER_GATHER blocks - LIST_ENTRY AllList; // All SXG_SCATTER_GATHER blocks - dma_addr_t PhysicalAddress;// physical address - unsigned char State; // See SXG_BUFFER state above - unsigned char CmdIndex; // Command ring index - struct sk_buff * DumbPacket; // Associated Packet - u32 Direction; // For asynchronous completions - u32 CurOffset; // Current SGL offset - u32 SglRef; // SGL reference count - VLAN_HDR VlanTag; // VLAN tag to be inserted into SGL - PSCATTER_GATHER_LIST pSgl; // SGL Addr. Possibly &Sgl - SXG_X64_SGL Sgl; // SGL handed to card + SXG_SGL_TYPE Type; // FIRST! Dumb-nic or offload + void *adapter; // Back pointer to adapter + LIST_ENTRY FreeList; // Free SXG_SCATTER_GATHER blocks + LIST_ENTRY AllList; // All SXG_SCATTER_GATHER blocks + dma_addr_t PhysicalAddress; // physical address + unsigned char State; // See SXG_BUFFER state above + unsigned char CmdIndex; // Command ring index + struct sk_buff *DumbPacket; // Associated Packet + u32 Direction; // For asynchronous completions + u32 CurOffset; // Current SGL offset + u32 SglRef; // SGL reference count + VLAN_HDR VlanTag; // VLAN tag to be inserted into SGL + PSCATTER_GATHER_LIST pSgl; // SGL Addr. Possibly &Sgl + SXG_X64_SGL Sgl; // SGL handed to card } SXG_SCATTER_GATHER, *PSXG_SCATTER_GATHER; #if defined(CONFIG_X86_64) @@ -856,6 +853,5 @@ typedef struct _SXG_SCATTER_GATHER { #define SXG_SGL_BUFFER(_SxgSgl) NULL #define SXG_SGL_BUF_SIZE 0 #else - Stop Compilation; +Stop Compilation; #endif - diff --git a/drivers/staging/sxg/sxghw.h b/drivers/staging/sxg/sxghw.h index 8f4f6effdd98..2222ae91fd97 100644 --- a/drivers/staging/sxg/sxghw.h +++ b/drivers/staging/sxg/sxghw.h @@ -13,11 +13,11 @@ /******************************************************************************* * Configuration space *******************************************************************************/ -// PCI Vendor ID -#define SXG_VENDOR_ID 0x139A // Alacritech's Vendor ID +/* PCI Vendor ID */ +#define SXG_VENDOR_ID 0x139A /* Alacritech's Vendor ID */ // PCI Device ID -#define SXG_DEVICE_ID 0x0009 // Sahara Device ID +#define SXG_DEVICE_ID 0x0009 /* Sahara Device ID */ // // Subsystem IDs. @@ -141,7 +141,7 @@ typedef struct _SXG_HW_REGS { #define SXG_REGISTER_SIZE_PER_CPU 0x00002000 // Used to sanity check UCODE_REGS structure // Sahara receive sequencer status values -#define SXG_RCV_STATUS_ATTN 0x80000000 // Attention +#define SXG_RCV_STATUS_ATTN 0x80000000 // Attention #define SXG_RCV_STATUS_TRANSPORT_MASK 0x3F000000 // Transport mask #define SXG_RCV_STATUS_TRANSPORT_ERROR 0x20000000 // Transport error #define SXG_RCV_STATUS_TRANSPORT_CSUM 0x23000000 // Transport cksum error @@ -156,9 +156,9 @@ typedef struct _SXG_HW_REGS { #define SXG_RCV_STATUS_TRANSPORT_FTP 0x03000000 // Transport FTP #define SXG_RCV_STATUS_TRANSPORT_HTTP 0x02000000 // Transport HTTP #define SXG_RCV_STATUS_TRANSPORT_SMB 0x01000000 // Transport SMB -#define SXG_RCV_STATUS_NETWORK_MASK 0x00FF0000 // Network mask +#define SXG_RCV_STATUS_NETWORK_MASK 0x00FF0000 // Network mask #define SXG_RCV_STATUS_NETWORK_ERROR 0x00800000 // Network error -#define SXG_RCV_STATUS_NETWORK_CSUM 0x00830000 // Network cksum error +#define SXG_RCV_STATUS_NETWORK_CSUM 0x00830000 // Network cksum error #define SXG_RCV_STATUS_NETWORK_UFLOW 0x00820000 // Network underflow error #define SXG_RCV_STATUS_NETWORK_HDRLEN 0x00800000 // Network header length #define SXG_RCV_STATUS_NETWORK_OFLOW 0x00400000 // Network overflow detected @@ -167,67 +167,67 @@ typedef struct _SXG_HW_REGS { #define SXG_RCV_STATUS_NETWORK_OFFSET 0x00080000 // Network offset detected #define SXG_RCV_STATUS_NETWORK_FRAGMENT 0x00040000 // Network fragment detected #define SXG_RCV_STATUS_NETWORK_TRANS_MASK 0x00030000 // Network transport type mask -#define SXG_RCV_STATUS_NETWORK_UDP 0x00020000 // UDP -#define SXG_RCV_STATUS_NETWORK_TCP 0x00010000 // TCP -#define SXG_RCV_STATUS_IPONLY 0x00008000 // IP-only not TCP -#define SXG_RCV_STATUS_PKT_PRI 0x00006000 // Receive priority -#define SXG_RCV_STATUS_PKT_PRI_SHFT 13 // Receive priority shift -#define SXG_RCV_STATUS_PARITY 0x00001000 // MAC Receive RAM parity error -#define SXG_RCV_STATUS_ADDRESS_MASK 0x00000F00 // Link address detection mask -#define SXG_RCV_STATUS_ADDRESS_D 0x00000B00 // Link address D -#define SXG_RCV_STATUS_ADDRESS_C 0x00000A00 // Link address C -#define SXG_RCV_STATUS_ADDRESS_B 0x00000900 // Link address B -#define SXG_RCV_STATUS_ADDRESS_A 0x00000800 // Link address A +#define SXG_RCV_STATUS_NETWORK_UDP 0x00020000 // UDP +#define SXG_RCV_STATUS_NETWORK_TCP 0x00010000 // TCP +#define SXG_RCV_STATUS_IPONLY 0x00008000 // IP-only not TCP +#define SXG_RCV_STATUS_PKT_PRI 0x00006000 // Receive priority +#define SXG_RCV_STATUS_PKT_PRI_SHFT 13 // Receive priority shift +#define SXG_RCV_STATUS_PARITY 0x00001000 // MAC Receive RAM parity error +#define SXG_RCV_STATUS_ADDRESS_MASK 0x00000F00 // Link address detection mask +#define SXG_RCV_STATUS_ADDRESS_D 0x00000B00 // Link address D +#define SXG_RCV_STATUS_ADDRESS_C 0x00000A00 // Link address C +#define SXG_RCV_STATUS_ADDRESS_B 0x00000900 // Link address B +#define SXG_RCV_STATUS_ADDRESS_A 0x00000800 // Link address A #define SXG_RCV_STATUS_ADDRESS_BCAST 0x00000300 // Link address broadcast #define SXG_RCV_STATUS_ADDRESS_MCAST 0x00000200 // Link address multicast #define SXG_RCV_STATUS_ADDRESS_CMCAST 0x00000100 // Link control multicast -#define SXG_RCV_STATUS_LINK_MASK 0x000000FF // Link status mask -#define SXG_RCV_STATUS_LINK_ERROR 0x00000080 // Link error -#define SXG_RCV_STATUS_LINK_MASK 0x000000FF // Link status mask -#define SXG_RCV_STATUS_LINK_PARITY 0x00000087 // RcvMacQ parity error -#define SXG_RCV_STATUS_LINK_EARLY 0x00000086 // Data early +#define SXG_RCV_STATUS_LINK_MASK 0x000000FF // Link status mask +#define SXG_RCV_STATUS_LINK_ERROR 0x00000080 // Link error +#define SXG_RCV_STATUS_LINK_MASK 0x000000FF // Link status mask +#define SXG_RCV_STATUS_LINK_PARITY 0x00000087 // RcvMacQ parity error +#define SXG_RCV_STATUS_LINK_EARLY 0x00000086 // Data early #define SXG_RCV_STATUS_LINK_BUFOFLOW 0x00000085 // Buffer overflow -#define SXG_RCV_STATUS_LINK_CODE 0x00000084 // Link code error -#define SXG_RCV_STATUS_LINK_DRIBBLE 0x00000083 // Dribble nibble -#define SXG_RCV_STATUS_LINK_CRC 0x00000082 // CRC error -#define SXG_RCV_STATUS_LINK_OFLOW 0x00000081 // Link overflow -#define SXG_RCV_STATUS_LINK_UFLOW 0x00000080 // Link underflow -#define SXG_RCV_STATUS_LINK_8023 0x00000020 // 802.3 -#define SXG_RCV_STATUS_LINK_SNAP 0x00000010 // Snap -#define SXG_RCV_STATUS_LINK_VLAN 0x00000008 // VLAN +#define SXG_RCV_STATUS_LINK_CODE 0x00000084 // Link code error +#define SXG_RCV_STATUS_LINK_DRIBBLE 0x00000083 // Dribble nibble +#define SXG_RCV_STATUS_LINK_CRC 0x00000082 // CRC error +#define SXG_RCV_STATUS_LINK_OFLOW 0x00000081 // Link overflow +#define SXG_RCV_STATUS_LINK_UFLOW 0x00000080 // Link underflow +#define SXG_RCV_STATUS_LINK_8023 0x00000020 // 802.3 +#define SXG_RCV_STATUS_LINK_SNAP 0x00000010 // Snap +#define SXG_RCV_STATUS_LINK_VLAN 0x00000008 // VLAN #define SXG_RCV_STATUS_LINK_TYPE_MASK 0x00000007 // Network type mask -#define SXG_RCV_STATUS_LINK_CONTROL 0x00000003 // Control packet -#define SXG_RCV_STATUS_LINK_IPV6 0x00000002 // IPv6 packet -#define SXG_RCV_STATUS_LINK_IPV4 0x00000001 // IPv4 packet +#define SXG_RCV_STATUS_LINK_CONTROL 0x00000003 // Control packet +#define SXG_RCV_STATUS_LINK_IPV6 0x00000002 // IPv6 packet +#define SXG_RCV_STATUS_LINK_IPV4 0x00000001 // IPv4 packet /*************************************************************************** * Sahara receive and transmit configuration registers ***************************************************************************/ -#define RCV_CONFIG_RESET 0x80000000 // RcvConfig register reset -#define RCV_CONFIG_ENABLE 0x40000000 // Enable the receive logic -#define RCV_CONFIG_ENPARSE 0x20000000 // Enable the receive parser -#define RCV_CONFIG_SOCKET 0x10000000 // Enable the socket detector -#define RCV_CONFIG_RCVBAD 0x08000000 // Receive all bad frames -#define RCV_CONFIG_CONTROL 0x04000000 // Receive all control frames -#define RCV_CONFIG_RCVPAUSE 0x02000000 // Enable pause transmit when attn -#define RCV_CONFIG_TZIPV6 0x01000000 // Include TCP port w/ IPv6 toeplitz -#define RCV_CONFIG_TZIPV4 0x00800000 // Include TCP port w/ IPv4 toeplitz -#define RCV_CONFIG_FLUSH 0x00400000 // Flush buffers +#define RCV_CONFIG_RESET 0x80000000 // RcvConfig register reset +#define RCV_CONFIG_ENABLE 0x40000000 // Enable the receive logic +#define RCV_CONFIG_ENPARSE 0x20000000 // Enable the receive parser +#define RCV_CONFIG_SOCKET 0x10000000 // Enable the socket detector +#define RCV_CONFIG_RCVBAD 0x08000000 // Receive all bad frames +#define RCV_CONFIG_CONTROL 0x04000000 // Receive all control frames +#define RCV_CONFIG_RCVPAUSE 0x02000000 // Enable pause transmit when attn +#define RCV_CONFIG_TZIPV6 0x01000000 // Include TCP port w/ IPv6 toeplitz +#define RCV_CONFIG_TZIPV4 0x00800000 // Include TCP port w/ IPv4 toeplitz +#define RCV_CONFIG_FLUSH 0x00400000 // Flush buffers #define RCV_CONFIG_PRIORITY_MASK 0x00300000 // Priority level #define RCV_CONFIG_HASH_MASK 0x00030000 // Hash depth -#define RCV_CONFIG_HASH_8 0x00000000 // Hash depth 8 -#define RCV_CONFIG_HASH_16 0x00010000 // Hash depth 16 -#define RCV_CONFIG_HASH_4 0x00020000 // Hash depth 4 -#define RCV_CONFIG_HASH_2 0x00030000 // Hash depth 2 +#define RCV_CONFIG_HASH_8 0x00000000 // Hash depth 8 +#define RCV_CONFIG_HASH_16 0x00010000 // Hash depth 16 +#define RCV_CONFIG_HASH_4 0x00020000 // Hash depth 4 +#define RCV_CONFIG_HASH_2 0x00030000 // Hash depth 2 #define RCV_CONFIG_BUFLEN_MASK 0x0000FFF0 // Buffer length bits 15:4. ie multiple of 16. -#define RCV_CONFIG_SKT_DIS 0x00000008 // Disable socket detection on attn +#define RCV_CONFIG_SKT_DIS 0x00000008 // Disable socket detection on attn // Macro to determine RCV_CONFIG_BUFLEN based on maximum frame size. // We add 18 bytes for Sahara receive status and padding, plus 4 bytes for CRC, // and round up to nearest 16 byte boundary #define RCV_CONFIG_BUFSIZE(_MaxFrame) ((((_MaxFrame) + 22) + 15) & RCV_CONFIG_BUFLEN_MASK) -#define XMT_CONFIG_RESET 0x80000000 // XmtConfig register reset -#define XMT_CONFIG_ENABLE 0x40000000 // Enable transmit logic +#define XMT_CONFIG_RESET 0x80000000 // XmtConfig register reset +#define XMT_CONFIG_ENABLE 0x40000000 // Enable transmit logic #define XMT_CONFIG_MAC_PARITY 0x20000000 // Inhibit MAC RAM parity error #define XMT_CONFIG_BUF_PARITY 0x10000000 // Inhibit D2F buffer parity error #define XMT_CONFIG_MEM_PARITY 0x08000000 // Inhibit 1T SRAM parity error @@ -249,9 +249,9 @@ typedef struct _SXG_HW_REGS { // A-XGMAC Configuration Register 1 #define AXGMAC_CFG1_XMT_PAUSE 0x80000000 // Allow the sending of Pause frames -#define AXGMAC_CFG1_XMT_EN 0x40000000 // Enable transmit +#define AXGMAC_CFG1_XMT_EN 0x40000000 // Enable transmit #define AXGMAC_CFG1_RCV_PAUSE 0x20000000 // Allow the detection of Pause frames -#define AXGMAC_CFG1_RCV_EN 0x10000000 // Enable receive +#define AXGMAC_CFG1_RCV_EN 0x10000000 // Enable receive #define AXGMAC_CFG1_XMT_STATE 0x04000000 // Current transmit state - READ ONLY #define AXGMAC_CFG1_RCV_STATE 0x01000000 // Current receive state - READ ONLY #define AXGMAC_CFG1_XOFF_SHORT 0x00001000 // Only pause for 64 slot on XOFF @@ -262,24 +262,24 @@ typedef struct _SXG_HW_REGS { #define AXGMAC_CFG1_RCV_FCS2 0x00000200 // Delay receive FCS 2 4-byte words #define AXGMAC_CFG1_RCV_FCS3 0x00000300 // Delay receive FCS 3 4-byte words #define AXGMAC_CFG1_PKT_OVERRIDE 0x00000080 // Per-packet override enable -#define AXGMAC_CFG1_SWAP 0x00000040 // Byte swap enable +#define AXGMAC_CFG1_SWAP 0x00000040 // Byte swap enable #define AXGMAC_CFG1_SHORT_ASSERT 0x00000020 // ASSERT srdrpfrm on short frame (<64) #define AXGMAC_CFG1_RCV_STRICT 0x00000010 // RCV only 802.3AE when CLEAR #define AXGMAC_CFG1_CHECK_LEN 0x00000008 // Verify frame length -#define AXGMAC_CFG1_GEN_FCS 0x00000004 // Generate FCS +#define AXGMAC_CFG1_GEN_FCS 0x00000004 // Generate FCS #define AXGMAC_CFG1_PAD_MASK 0x00000003 // Mask for pad bits -#define AXGMAC_CFG1_PAD_64 0x00000001 // Pad frames to 64 bytes +#define AXGMAC_CFG1_PAD_64 0x00000001 // Pad frames to 64 bytes #define AXGMAC_CFG1_PAD_VLAN 0x00000002 // Detect VLAN and pad to 68 bytes -#define AXGMAC_CFG1_PAD_68 0x00000003 // Pad to 68 bytes +#define AXGMAC_CFG1_PAD_68 0x00000003 // Pad to 68 bytes // A-XGMAC Configuration Register 2 #define AXGMAC_CFG2_GEN_PAUSE 0x80000000 // Generate single pause frame (test) #define AXGMAC_CFG2_LF_MANUAL 0x08000000 // Manual link fault sequence -#define AXGMAC_CFG2_LF_AUTO 0x04000000 // Auto link fault sequence +#define AXGMAC_CFG2_LF_AUTO 0x04000000 // Auto link fault sequence #define AXGMAC_CFG2_LF_REMOTE 0x02000000 // Remote link fault (READ ONLY) #define AXGMAC_CFG2_LF_LOCAL 0x01000000 // Local link fault (READ ONLY) #define AXGMAC_CFG2_IPG_MASK 0x001F0000 // Inter packet gap -#define AXGMAC_CFG2_IPG_SHIFT 16 +#define AXGMAC_CFG2_IPG_SHIFT 16 #define AXGMAC_CFG2_PAUSE_XMT 0x00008000 // Pause transmit module #define AXGMAC_CFG2_IPG_EXTEN 0x00000020 // Enable IPG extension algorithm #define AXGMAC_CFG2_IPGEX_MASK 0x0000001F // IPG extension @@ -299,9 +299,9 @@ typedef struct _SXG_HW_REGS { #define AXGMAC_SARHIGH_OCTET_SIX 0x00FF0000 // Sixth octet // A-XGMAC Maximum frame length register -#define AXGMAC_MAXFRAME_XMT 0x3FFF0000 // Maximum transmit frame length +#define AXGMAC_MAXFRAME_XMT 0x3FFF0000 // Maximum transmit frame length #define AXGMAC_MAXFRAME_XMT_SHIFT 16 -#define AXGMAC_MAXFRAME_RCV 0x0000FFFF // Maximum receive frame length +#define AXGMAC_MAXFRAME_RCV 0x0000FFFF // Maximum receive frame length // This register doesn't need to be written for standard MTU. // For jumbo, I'll just statically define the value here. This // value sets the receive byte count to 9036 (0x234C) and the @@ -324,34 +324,34 @@ typedef struct _SXG_HW_REGS { // A-XGMAC AMIIM Field Register #define AXGMAC_AMIIM_FIELD_ST 0xC0000000 // 2-bit ST field -#define AXGMAC_AMIIM_FIELD_ST_SHIFT 30 +#define AXGMAC_AMIIM_FIELD_ST_SHIFT 30 #define AXGMAC_AMIIM_FIELD_OP 0x30000000 // 2-bit OP field -#define AXGMAC_AMIIM_FIELD_OP_SHIFT 28 -#define AXGMAC_AMIIM_FIELD_PORT_ADDR 0x0F800000 // Port address field (hstphyadx in spec) +#define AXGMAC_AMIIM_FIELD_OP_SHIFT 28 +#define AXGMAC_AMIIM_FIELD_PORT_ADDR 0x0F800000 // Port address field (hstphyadx in spec) #define AXGMAC_AMIIM_FIELD_PORT_SHIFT 23 #define AXGMAC_AMIIM_FIELD_DEV_ADDR 0x007C0000 // Device address field (hstregadx in spec) #define AXGMAC_AMIIM_FIELD_DEV_SHIFT 18 #define AXGMAC_AMIIM_FIELD_TA 0x00030000 // 2-bit TA field -#define AXGMAC_AMIIM_FIELD_TA_SHIFT 16 +#define AXGMAC_AMIIM_FIELD_TA_SHIFT 16 #define AXGMAC_AMIIM_FIELD_DATA 0x0000FFFF // Data field // Values for the AXGMAC_AMIIM_FIELD_OP field in the A-XGMAC AMIIM Field Register -#define MIIM_OP_ADDR 0 // MIIM Address set operation -#define MIIM_OP_WRITE 1 // MIIM Write register operation -#define MIIM_OP_READ 2 // MIIM Read register operation +#define MIIM_OP_ADDR 0 // MIIM Address set operation +#define MIIM_OP_WRITE 1 // MIIM Write register operation +#define MIIM_OP_READ 2 // MIIM Read register operation #define MIIM_OP_ADDR_SHIFT (MIIM_OP_ADDR << AXGMAC_AMIIM_FIELD_OP_SHIFT) // Values for the AXGMAC_AMIIM_FIELD_PORT_ADDR field in the A-XGMAC AMIIM Field Register -#define MIIM_PORT_NUM 1 // All Sahara MIIM modules use port 1 +#define MIIM_PORT_NUM 1 // All Sahara MIIM modules use port 1 // Values for the AXGMAC_AMIIM_FIELD_DEV_ADDR field in the A-XGMAC AMIIM Field Register -#define MIIM_DEV_PHY_PMA 1 // PHY PMA/PMD module MIIM device number -#define MIIM_DEV_PHY_PCS 3 // PHY PCS module MIIM device number -#define MIIM_DEV_PHY_XS 4 // PHY XS module MIIM device number -#define MIIM_DEV_XGXS 5 // XGXS MIIM device number +#define MIIM_DEV_PHY_PMA 1 // PHY PMA/PMD module MIIM device number +#define MIIM_DEV_PHY_PCS 3 // PHY PCS module MIIM device number +#define MIIM_DEV_PHY_XS 4 // PHY XS module MIIM device number +#define MIIM_DEV_XGXS 5 // XGXS MIIM device number // Values for the AXGMAC_AMIIM_FIELD_TA field in the A-XGMAC AMIIM Field Register -#define MIIM_TA_10GB 2 // set to 2 for 10 GB operation +#define MIIM_TA_10GB 2 // set to 2 for 10 GB operation // A-XGMAC AMIIM Configuration Register #define AXGMAC_AMIIM_CFG_NOPREAM 0x00000080 // Bypass preamble of mngmt frame @@ -365,25 +365,25 @@ typedef struct _SXG_HW_REGS { #define AXGMAC_AMIIM_INDC_BUSY 0x00000001 // Set until cmd operation complete // Link Status and Control Register -#define LS_PHY_CLR_RESET 0x80000000 // Clear reset signal to PHY +#define LS_PHY_CLR_RESET 0x80000000 // Clear reset signal to PHY #define LS_SERDES_POWER_DOWN 0x40000000 // Power down the Sahara Serdes -#define LS_XGXS_ENABLE 0x20000000 // Enable the XAUI XGXS logic -#define LS_XGXS_CTL 0x10000000 // Hold XAUI XGXS logic reset until Serdes is up -#define LS_SERDES_DOWN 0x08000000 // When 0, XAUI Serdes is up and initialization is complete -#define LS_TRACE_DOWN 0x04000000 // When 0, Trace Serdes is up and initialization is complete -#define LS_PHY_CLK_25MHZ 0x02000000 // Set PHY clock to 25 MHz (else 156.125 MHz) -#define LS_PHY_CLK_EN 0x01000000 // Enable clock to PHY -#define LS_XAUI_LINK_UP 0x00000010 // XAUI link is up -#define LS_XAUI_LINK_CHNG 0x00000008 // XAUI link status has changed -#define LS_LINK_ALARM 0x00000004 // Link alarm pin -#define LS_ATTN_CTRL_MASK 0x00000003 // Mask link attention control bits -#define LS_ATTN_ALARM 0x00000000 // 00 => Attn on link alarm +#define LS_XGXS_ENABLE 0x20000000 // Enable the XAUI XGXS logic +#define LS_XGXS_CTL 0x10000000 // Hold XAUI XGXS logic reset until Serdes is up +#define LS_SERDES_DOWN 0x08000000 // When 0, XAUI Serdes is up and initialization is complete +#define LS_TRACE_DOWN 0x04000000 // When 0, Trace Serdes is up and initialization is complete +#define LS_PHY_CLK_25MHZ 0x02000000 // Set PHY clock to 25 MHz (else 156.125 MHz) +#define LS_PHY_CLK_EN 0x01000000 // Enable clock to PHY +#define LS_XAUI_LINK_UP 0x00000010 // XAUI link is up +#define LS_XAUI_LINK_CHNG 0x00000008 // XAUI link status has changed +#define LS_LINK_ALARM 0x00000004 // Link alarm pin +#define LS_ATTN_CTRL_MASK 0x00000003 // Mask link attention control bits +#define LS_ATTN_ALARM 0x00000000 // 00 => Attn on link alarm #define LS_ATTN_ALARM_OR_STAT_CHNG 0x00000001 // 01 => Attn on link alarm or status change -#define LS_ATTN_STAT_CHNG 0x00000002 // 10 => Attn on link status change -#define LS_ATTN_NONE 0x00000003 // 11 => no Attn +#define LS_ATTN_STAT_CHNG 0x00000002 // 10 => Attn on link status change +#define LS_ATTN_NONE 0x00000003 // 11 => no Attn // Link Address High Registers -#define LINK_ADDR_ENABLE 0x80000000 // Enable this link address +#define LINK_ADDR_ENABLE 0x80000000 // Enable this link address /*************************************************************************** @@ -396,7 +396,7 @@ typedef struct _SXG_HW_REGS { #define XGXS_ADDRESS_STATUS1 0x0001 // XS Status 1 #define XGXS_ADDRESS_DEVID_LOW 0x0002 // XS Device ID (low) #define XGXS_ADDRESS_DEVID_HIGH 0x0003 // XS Device ID (high) -#define XGXS_ADDRESS_SPEED 0x0004 // XS Speed ability +#define XGXS_ADDRESS_SPEED 0x0004 // XS Speed ability #define XGXS_ADDRESS_DEV_LOW 0x0005 // XS Devices in package #define XGXS_ADDRESS_DEV_HIGH 0x0006 // XS Devices in package #define XGXS_ADDRESS_STATUS2 0x0008 // XS Status 2 @@ -410,27 +410,27 @@ typedef struct _SXG_HW_REGS { #define XGXS_ADDRESS_RESET_HI2 0x8003 // Vendor-Specific Reset Hi 2 // XS Control 1 register bit definitions -#define XGXS_CONTROL1_RESET 0x8000 // Reset - self clearing +#define XGXS_CONTROL1_RESET 0x8000 // Reset - self clearing #define XGXS_CONTROL1_LOOPBACK 0x4000 // Enable loopback #define XGXS_CONTROL1_SPEED1 0x2000 // 0 = unspecified, 1 = 10Gb+ #define XGXS_CONTROL1_LOWPOWER 0x0400 // 1 = Low power mode #define XGXS_CONTROL1_SPEED2 0x0040 // Same as SPEED1 (?) -#define XGXS_CONTROL1_SPEED 0x003C // Everything reserved except zero (?) +#define XGXS_CONTROL1_SPEED 0x003C // Everything reserved except zero (?) // XS Status 1 register bit definitions -#define XGXS_STATUS1_FAULT 0x0080 // Fault detected -#define XGXS_STATUS1_LINK 0x0004 // 1 = Link up +#define XGXS_STATUS1_FAULT 0x0080 // Fault detected +#define XGXS_STATUS1_LINK 0x0004 // 1 = Link up #define XGXS_STATUS1_LOWPOWER 0x0002 // 1 = Low power supported // XS Speed register bit definitions -#define XGXS_SPEED_10G 0x0001 // 1 = 10G capable +#define XGXS_SPEED_10G 0x0001 // 1 = 10G capable // XS Devices register bit definitions -#define XGXS_DEVICES_DTE 0x0020 // DTE XS Present -#define XGXS_DEVICES_PHY 0x0010 // PHY XS Present -#define XGXS_DEVICES_PCS 0x0008 // PCS Present -#define XGXS_DEVICES_WIS 0x0004 // WIS Present -#define XGXS_DEVICES_PMD 0x0002 // PMD/PMA Present +#define XGXS_DEVICES_DTE 0x0020 // DTE XS Present +#define XGXS_DEVICES_PHY 0x0010 // PHY XS Present +#define XGXS_DEVICES_PCS 0x0008 // PCS Present +#define XGXS_DEVICES_WIS 0x0004 // WIS Present +#define XGXS_DEVICES_PMD 0x0002 // PMD/PMA Present #define XGXS_DEVICES_CLAUSE22 0x0001 // Clause 22 registers present // XS Devices High register bit definitions @@ -444,18 +444,18 @@ typedef struct _SXG_HW_REGS { #define XGXS_STATUS2_RCV_FAULT 0x0400 // Receive fault // XS Package ID High register bit definitions -#define XGXS_PKGID_HIGH_ORG 0xFC00 // Organizationally Unique -#define XGXS_PKGID_HIGH_MFG 0x03F0 // Manufacturer Model -#define XGXS_PKGID_HIGH_REV 0x000F // Revision Number +#define XGXS_PKGID_HIGH_ORG 0xFC00 // Organizationally Unique +#define XGXS_PKGID_HIGH_MFG 0x03F0 // Manufacturer Model +#define XGXS_PKGID_HIGH_REV 0x000F // Revision Number // XS Lane Status register bit definitions -#define XGXS_LANE_PHY 0x1000 // PHY/DTE lane alignment status -#define XGXS_LANE_PATTERN 0x0800 // Pattern testing ability -#define XGXS_LANE_LOOPBACK 0x0400 // PHY loopback ability -#define XGXS_LANE_SYNC3 0x0008 // Lane 3 sync -#define XGXS_LANE_SYNC2 0x0004 // Lane 2 sync -#define XGXS_LANE_SYNC1 0x0002 // Lane 1 sync -#define XGXS_LANE_SYNC0 0x0001 // Lane 0 sync +#define XGXS_LANE_PHY 0x1000 // PHY/DTE lane alignment status +#define XGXS_LANE_PATTERN 0x0800 // Pattern testing ability +#define XGXS_LANE_LOOPBACK 0x0400 // PHY loopback ability +#define XGXS_LANE_SYNC3 0x0008 // Lane 3 sync +#define XGXS_LANE_SYNC2 0x0004 // Lane 2 sync +#define XGXS_LANE_SYNC1 0x0002 // Lane 1 sync +#define XGXS_LANE_SYNC0 0x0001 // Lane 0 sync // XS Test Control register bit definitions #define XGXS_TEST_PATTERN_ENABLE 0x0004 // Test pattern enabled @@ -473,10 +473,10 @@ typedef struct _SXG_HW_REGS { // LASI (Link Alarm Status Interrupt) Registers (located in MIIM_DEV_PHY_PMA device) #define LASI_RX_ALARM_CONTROL 0x9000 // LASI RX_ALARM Control #define LASI_TX_ALARM_CONTROL 0x9001 // LASI TX_ALARM Control -#define LASI_CONTROL 0x9002 // LASI Control +#define LASI_CONTROL 0x9002 // LASI Control #define LASI_RX_ALARM_STATUS 0x9003 // LASI RX_ALARM Status #define LASI_TX_ALARM_STATUS 0x9004 // LASI TX_ALARM Status -#define LASI_STATUS 0x9005 // LASI Status +#define LASI_STATUS 0x9005 // LASI Status // LASI_CONTROL bit definitions #define LASI_CTL_RX_ALARM_ENABLE 0x0004 // Enable RX_ALARM interrupts @@ -489,34 +489,34 @@ typedef struct _SXG_HW_REGS { #define LASI_STATUS_LS_ALARM 0x0001 // Link Status // PHY registers - PMA/PMD (device 1) -#define PHY_PMA_CONTROL1 0x0000 // PMA/PMD Control 1 -#define PHY_PMA_STATUS1 0x0001 // PMA/PMD Status 1 -#define PHY_PMA_RCV_DET 0x000A // PMA/PMD Receive Signal Detect +#define PHY_PMA_CONTROL1 0x0000 // PMA/PMD Control 1 +#define PHY_PMA_STATUS1 0x0001 // PMA/PMD Status 1 +#define PHY_PMA_RCV_DET 0x000A // PMA/PMD Receive Signal Detect // other PMA/PMD registers exist and can be defined as needed // PHY registers - PCS (device 3) -#define PHY_PCS_CONTROL1 0x0000 // PCS Control 1 -#define PHY_PCS_STATUS1 0x0001 // PCS Status 1 -#define PHY_PCS_10G_STATUS1 0x0020 // PCS 10GBASE-R Status 1 +#define PHY_PCS_CONTROL1 0x0000 // PCS Control 1 +#define PHY_PCS_STATUS1 0x0001 // PCS Status 1 +#define PHY_PCS_10G_STATUS1 0x0020 // PCS 10GBASE-R Status 1 // other PCS registers exist and can be defined as needed // PHY registers - XS (device 4) -#define PHY_XS_CONTROL1 0x0000 // XS Control 1 -#define PHY_XS_STATUS1 0x0001 // XS Status 1 -#define PHY_XS_LANE_STATUS 0x0018 // XS Lane Status +#define PHY_XS_CONTROL1 0x0000 // XS Control 1 +#define PHY_XS_STATUS1 0x0001 // XS Status 1 +#define PHY_XS_LANE_STATUS 0x0018 // XS Lane Status // other XS registers exist and can be defined as needed // PHY_PMA_CONTROL1 register bit definitions -#define PMA_CONTROL1_RESET 0x8000 // PMA/PMD reset +#define PMA_CONTROL1_RESET 0x8000 // PMA/PMD reset // PHY_PMA_RCV_DET register bit definitions -#define PMA_RCV_DETECT 0x0001 // PMA/PMD receive signal detect +#define PMA_RCV_DETECT 0x0001 // PMA/PMD receive signal detect // PHY_PCS_10G_STATUS1 register bit definitions -#define PCS_10B_BLOCK_LOCK 0x0001 // PCS 10GBASE-R locked to receive blocks +#define PCS_10B_BLOCK_LOCK 0x0001 // PCS 10GBASE-R locked to receive blocks // PHY_XS_LANE_STATUS register bit definitions -#define XS_LANE_ALIGN 0x1000 // XS transmit lanes aligned +#define XS_LANE_ALIGN 0x1000 // XS transmit lanes aligned // PHY Microcode download data structure typedef struct _PHY_UCODE { @@ -558,8 +558,8 @@ typedef struct _XMT_DESC { // command codes #define XMT_DESC_CMD_RAW_SEND 0 // raw send descriptor #define XMT_DESC_CMD_CSUM_INSERT 1 // checksum insert descriptor -#define XMT_DESC_CMD_FORMAT 2 // format descriptor -#define XMT_DESC_CMD_PRIME 3 // prime descriptor +#define XMT_DESC_CMD_FORMAT 2 // format descriptor +#define XMT_DESC_CMD_PRIME 3 // prime descriptor #define XMT_DESC_CMD_CODE_SHFT 6 // comand code shift (shift to bits [31:30] in word 0) // shifted command codes #define XMT_RAW_SEND (XMT_DESC_CMD_RAW_SEND << XMT_DESC_CMD_CODE_SHFT) @@ -569,22 +569,22 @@ typedef struct _XMT_DESC { // XMT_DESC Control Byte (XmtCtl) definitions // NOTE: These bits do not work on Sahara (Rev A)! -#define XMT_CTL_PAUSE_FRAME 0x80 // current frame is a pause control frame (for statistics) +#define XMT_CTL_PAUSE_FRAME 0x80 // current frame is a pause control frame (for statistics) #define XMT_CTL_CONTROL_FRAME 0x40 // current frame is a control frame (for statistics) #define XMT_CTL_PER_PKT_QUAL 0x20 // per packet qualifier #define XMT_CTL_PAD_MODE_NONE 0x00 // do not pad frame -#define XMT_CTL_PAD_MODE_64 0x08 // pad frame to 64 bytes +#define XMT_CTL_PAD_MODE_64 0x08 // pad frame to 64 bytes #define XMT_CTL_PAD_MODE_VLAN_68 0x10 // pad frame to 64 bytes, and VLAN frames to 68 bytes -#define XMT_CTL_PAD_MODE_68 0x18 // pad frame to 68 bytes -#define XMT_CTL_GEN_FCS 0x04 // generate FCS (CRC) for this frame -#define XMT_CTL_DELAY_FCS_0 0x00 // do not delay FCS calcution -#define XMT_CTL_DELAY_FCS_1 0x01 // delay FCS calculation by 1 (4-byte) word -#define XMT_CTL_DELAY_FCS_2 0x02 // delay FCS calculation by 2 (4-byte) words -#define XMT_CTL_DELAY_FCS_3 0x03 // delay FCS calculation by 3 (4-byte) words +#define XMT_CTL_PAD_MODE_68 0x18 // pad frame to 68 bytes +#define XMT_CTL_GEN_FCS 0x04 // generate FCS (CRC) for this frame +#define XMT_CTL_DELAY_FCS_0 0x00 // do not delay FCS calcution +#define XMT_CTL_DELAY_FCS_1 0x01 // delay FCS calculation by 1 (4-byte) word +#define XMT_CTL_DELAY_FCS_2 0x02 // delay FCS calculation by 2 (4-byte) words +#define XMT_CTL_DELAY_FCS_3 0x03 // delay FCS calculation by 3 (4-byte) words // XMT_DESC XmtBufId definition -#define XMT_BUF_ID_SHFT 8 // The Xmt buffer ID is formed by dividing - // the buffer (DRAM) address by 256 (or << 8) +#define XMT_BUF_ID_SHFT 8 // The Xmt buffer ID is formed by dividing + // the buffer (DRAM) address by 256 (or << 8) /***************************************************************************** * Receiver Sequencer Definitions @@ -594,8 +594,8 @@ typedef struct _XMT_DESC { #define RCV_EVTQ_RBFID_MASK 0x0000FFFF // bit mask for the Receive Buffer ID // Receive Buffer ID definition -#define RCV_BUF_ID_SHFT 5 // The Rcv buffer ID is formed by dividing - // the buffer (DRAM) address by 32 (or << 5) +#define RCV_BUF_ID_SHFT 5 // The Rcv buffer ID is formed by dividing + // the buffer (DRAM) address by 32 (or << 5) // Format of the 18 byte Receive Buffer returned by the // Receive Sequencer for received packets @@ -623,48 +623,48 @@ typedef struct _RCV_BUF_HDR { * Queue definitions *****************************************************************************/ -// Ingress (read only) queue numbers -#define PXY_BUF_Q 0 // Proxy Buffer Queue -#define HST_EVT_Q 1 // Host Event Queue -#define XMT_BUF_Q 2 // Transmit Buffer Queue -#define SKT_EVL_Q 3 // RcvSqr Socket Event Low Priority Queue -#define RCV_EVL_Q 4 // RcvSqr Rcv Event Low Priority Queue -#define SKT_EVH_Q 5 // RcvSqr Socket Event High Priority Queue -#define RCV_EVH_Q 6 // RcvSqr Rcv Event High Priority Queue -#define DMA_RSP_Q 7 // Dma Response Queue - one per CPU context -// Local (read/write) queue numbers -#define LOCAL_A_Q 8 // Spare local Queue -#define LOCAL_B_Q 9 // Spare local Queue -#define LOCAL_C_Q 10 // Spare local Queue -#define FSM_EVT_Q 11 // Finite-State-Machine Event Queue -#define SBF_PAL_Q 12 // System Buffer Physical Address (low) Queue -#define SBF_PAH_Q 13 // System Buffer Physical Address (high) Queue -#define SBF_VAL_Q 14 // System Buffer Virtual Address (low) Queue -#define SBF_VAH_Q 15 // System Buffer Virtual Address (high) Queue -// Egress (write only) queue numbers -#define H2G_CMD_Q 16 // Host to GlbRam DMA Command Queue -#define H2D_CMD_Q 17 // Host to DRAM DMA Command Queue -#define G2H_CMD_Q 18 // GlbRam to Host DMA Command Queue -#define G2D_CMD_Q 19 // GlbRam to DRAM DMA Command Queue -#define D2H_CMD_Q 20 // DRAM to Host DMA Command Queue -#define D2G_CMD_Q 21 // DRAM to GlbRam DMA Command Queue -#define D2D_CMD_Q 22 // DRAM to DRAM DMA Command Queue -#define PXL_CMD_Q 23 // Low Priority Proxy Command Queue -#define PXH_CMD_Q 24 // High Priority Proxy Command Queue -#define RSQ_CMD_Q 25 // Receive Sequencer Command Queue -#define RCV_BUF_Q 26 // Receive Buffer Queue - -// Bit definitions for the Proxy Command queues (PXL_CMD_Q and PXH_CMD_Q) -#define PXY_COPY_EN 0x00200000 // enable copy of xmt descriptor to xmt command queue -#define PXY_SIZE_16 0x00000000 // copy 16 bytes -#define PXY_SIZE_32 0x00100000 // copy 32 bytes +/* Ingress (read only) queue numbers */ +#define PXY_BUF_Q 0 /* Proxy Buffer Queue */ +#define HST_EVT_Q 1 /* Host Event Queue */ +#define XMT_BUF_Q 2 /* Transmit Buffer Queue */ +#define SKT_EVL_Q 3 /* RcvSqr Socket Event Low Priority Queue */ +#define RCV_EVL_Q 4 /* RcvSqr Rcv Event Low Priority Queue */ +#define SKT_EVH_Q 5 /* RcvSqr Socket Event High Priority Queue */ +#define RCV_EVH_Q 6 /* RcvSqr Rcv Event High Priority Queue */ +#define DMA_RSP_Q 7 /* Dma Response Queue - one per CPU context */ +/* Local (read/write) queue numbers */ +#define LOCAL_A_Q 8 /* Spare local Queue */ +#define LOCAL_B_Q 9 /* Spare local Queue */ +#define LOCAL_C_Q 10 /* Spare local Queue */ +#define FSM_EVT_Q 11 /* Finite-State-Machine Event Queue */ +#define SBF_PAL_Q 12 /* System Buffer Physical Address (low) Queue */ +#define SBF_PAH_Q 13 /* System Buffer Physical Address (high) Queue */ +#define SBF_VAL_Q 14 /* System Buffer Virtual Address (low) Queue */ +#define SBF_VAH_Q 15 /* System Buffer Virtual Address (high) Queue */ +/* Egress (write only) queue numbers */ +#define H2G_CMD_Q 16 /* Host to GlbRam DMA Command Queue */ +#define H2D_CMD_Q 17 /* Host to DRAM DMA Command Queue */ +#define G2H_CMD_Q 18 /* GlbRam to Host DMA Command Queue */ +#define G2D_CMD_Q 19 /* GlbRam to DRAM DMA Command Queue */ +#define D2H_CMD_Q 20 /* DRAM to Host DMA Command Queue */ +#define D2G_CMD_Q 21 /* DRAM to GlbRam DMA Command Queue */ +#define D2D_CMD_Q 22 /* DRAM to DRAM DMA Command Queue */ +#define PXL_CMD_Q 23 /* Low Priority Proxy Command Queue */ +#define PXH_CMD_Q 24 /* High Priority Proxy Command Queue */ +#define RSQ_CMD_Q 25 /* Receive Sequencer Command Queue */ +#define RCV_BUF_Q 26 /* Receive Buffer Queue */ + +/* Bit definitions for the Proxy Command queues (PXL_CMD_Q and PXH_CMD_Q) */ +#define PXY_COPY_EN 0x00200000 /* enable copy of xmt descriptor to xmt command queue */ +#define PXY_SIZE_16 0x00000000 /* copy 16 bytes */ +#define PXY_SIZE_32 0x00100000 /* copy 32 bytes */ /***************************************************************************** * SXG EEPROM/Flash Configuration Definitions *****************************************************************************/ #pragma pack(push, 1) -// +/* */ typedef struct _HW_CFG_DATA { ushort Addr; union { @@ -673,22 +673,22 @@ typedef struct _HW_CFG_DATA { }; } HW_CFG_DATA, *PHW_CFG_DATA; -// +/* */ #define NUM_HW_CFG_ENTRIES ((128/sizeof(HW_CFG_DATA)) - 4) -// MAC address +/* MAC address */ typedef struct _SXG_CONFIG_MAC { - unsigned char MacAddr[6]; // MAC Address + unsigned char MacAddr[6]; /* MAC Address */ } SXG_CONFIG_MAC, *PSXG_CONFIG_MAC; -// +/* */ typedef struct _ATK_FRU { unsigned char PartNum[6]; unsigned char Revision[2]; unsigned char Serial[14]; } ATK_FRU, *PATK_FRU; -// OEM FRU Format types +/* OEM FRU Format types */ #define ATK_FRU_FORMAT 0x0000 #define CPQ_FRU_FORMAT 0x0001 #define DELL_FRU_FORMAT 0x0002 @@ -697,24 +697,24 @@ typedef struct _ATK_FRU { #define EMC_FRU_FORMAT 0x0005 #define NO_FRU_FORMAT 0xFFFF -// EEPROM/Flash Format +/* EEPROM/Flash Format */ typedef struct _SXG_CONFIG { - // - // Section 1 (128 bytes) - // - ushort MagicWord; // EEPROM/FLASH Magic code 'A5A5' - ushort SpiClks; // SPI bus clock dividers + /* */ + /* Section 1 (128 bytes) */ + /* */ + ushort MagicWord; /* EEPROM/FLASH Magic code 'A5A5' */ + ushort SpiClks; /* SPI bus clock dividers */ HW_CFG_DATA HwCfg[NUM_HW_CFG_ENTRIES]; - // - // - // - ushort Version; // EEPROM format version - SXG_CONFIG_MAC MacAddr[4]; // space for 4 MAC addresses - ATK_FRU AtkFru; // FRU information - ushort OemFruFormat; // OEM FRU format type - unsigned char OemFru[76]; // OEM FRU information (optional) - ushort Checksum; // Checksum of section 2 - // CS info XXXTODO + /* */ + /* */ + /* */ + ushort Version; /* EEPROM format version */ + SXG_CONFIG_MAC MacAddr[4]; /* space for 4 MAC addresses */ + ATK_FRU AtkFru; /* FRU information */ + ushort OemFruFormat; /* OEM FRU format type */ + unsigned char OemFru[76]; /* OEM FRU information (optional) */ + ushort Checksum; /* Checksum of section 2 */ + /* CS info XXXTODO */ } SXG_CONFIG, *PSXG_CONFIG; #pragma pack(pop) @@ -723,12 +723,12 @@ typedef struct _SXG_CONFIG { *****************************************************************************/ // Sahara (ASIC level) defines -#define SAHARA_GRAM_SIZE 0x020000 // GRAM size - 128 KB -#define SAHARA_DRAM_SIZE 0x200000 // DRAM size - 2 MB -#define SAHARA_QRAM_SIZE 0x004000 // QRAM size - 16K entries (64 KB) -#define SAHARA_WCS_SIZE 0x002000 // WCS - 8K instructions (x 108 bits) +#define SAHARA_GRAM_SIZE 0x020000 // GRAM size - 128 KB +#define SAHARA_DRAM_SIZE 0x200000 // DRAM size - 2 MB +#define SAHARA_QRAM_SIZE 0x004000 // QRAM size - 16K entries (64 KB) +#define SAHARA_WCS_SIZE 0x002000 // WCS - 8K instructions (x 108 bits) // Arabia (board level) defines -#define FLASH_SIZE 0x080000 // 512 KB (4 Mb) -#define EEPROM_SIZE_XFMR 512 // true EEPROM size (bytes), including xfmr area -#define EEPROM_SIZE_NO_XFMR 256 // EEPROM size excluding xfmr area +#define FLASH_SIZE 0x080000 // 512 KB (4 Mb) +#define EEPROM_SIZE_XFMR 512 // true EEPROM size (bytes), including xfmr area +#define EEPROM_SIZE_NO_XFMR 256 // EEPROM size excluding xfmr area diff --git a/drivers/staging/sxg/sxgphycode.h b/drivers/staging/sxg/sxgphycode.h index 26b36c81eb1a..8dbaeda7eca4 100644 --- a/drivers/staging/sxg/sxgphycode.h +++ b/drivers/staging/sxg/sxgphycode.h @@ -34,7 +34,7 @@ static PHY_UCODE PhyUcode[] = { */ /* Addr, Data */ {0xc017, 0xfeb0}, /* flip RX_LOS polarity (mandatory */ - /* patch for SFP+ applications) */ + /* patch for SFP+ applications) */ {0xC001, 0x0428}, /* flip RX serial polarity */ {0xc013, 0xf341}, /* invert lxmit clock (mandatory patch) */ @@ -43,7 +43,7 @@ static PHY_UCODE PhyUcode[] = { {0xc210, 0x8000}, /* reset datapath (mandatory patch) */ {0xc210, 0x0000}, /* reset datapath (mandatory patch) */ {0x0000, 0x0032}, /* wait for 50ms for datapath reset to */ - /* complete. (mandatory patch) */ + /* complete. (mandatory patch) */ /* Configure the LED's */ {0xc214, 0x0099}, /* configure the LED drivers */ @@ -52,15 +52,15 @@ static PHY_UCODE PhyUcode[] = { /* Transceiver-specific MDIO Patches: */ {0xc010, 0x448a}, /* (bit 14) mask out high BER input from the */ - /* LOS signal in 1.000A */ - /* (mandatory patch for SR code)*/ + /* LOS signal in 1.000A */ + /* (mandatory patch for SR code) */ {0xc003, 0x0181}, /* (bit 7) enable the CDR inc setting in */ - /* 1.C005 (mandatory patch for SR code) */ + /* 1.C005 (mandatory patch for SR code) */ /* Transceiver-specific Microcontroller Initialization: */ {0xc04a, 0x5200}, /* activate microcontroller and pause */ {0x0000, 0x0032}, /* wait 50ms for microcontroller before */ - /* writing in code. */ + /* writing in code. */ /* code block starts here: */ {0xcc00, 0x2009}, diff --git a/drivers/staging/usbip/usbip_common.c b/drivers/staging/usbip/usbip_common.c index e64918f42ff7..72e209276ea7 100644 --- a/drivers/staging/usbip/usbip_common.c +++ b/drivers/staging/usbip/usbip_common.c @@ -221,7 +221,7 @@ static void usbip_dump_request_type(__u8 rt) static void usbip_dump_usb_ctrlrequest(struct usb_ctrlrequest *cmd) { if (!cmd) { - printk(" %s : null pointer\n", __FUNCTION__); + printk(" %s : null pointer\n", __func__); return; } diff --git a/drivers/staging/usbip/vhci_rx.c b/drivers/staging/usbip/vhci_rx.c index 933ccaf50afb..58e3995d0e2c 100644 --- a/drivers/staging/usbip/vhci_rx.c +++ b/drivers/staging/usbip/vhci_rx.c @@ -202,7 +202,7 @@ static void vhci_rx_pdu(struct usbip_device *ud) ret = usbip_xmit(0, ud->tcp_socket, (char *) &pdu, sizeof(pdu), 0); if (ret != sizeof(pdu)) { uerr("receiving pdu failed! size is %d, should be %d\n", - ret, sizeof(pdu)); + ret, (unsigned int)sizeof(pdu)); usbip_event_add(ud, VDEV_EVENT_ERROR_TCP); return; } diff --git a/drivers/staging/winbond/Kconfig b/drivers/staging/winbond/Kconfig index 10d72bec88a9..425219ed7ab9 100644 --- a/drivers/staging/winbond/Kconfig +++ b/drivers/staging/winbond/Kconfig @@ -1,6 +1,6 @@ config W35UND tristate "Winbond driver" - depends on MAC80211 && WLAN_80211 && EXPERIMENTAL && !4KSTACKS + depends on MAC80211 && WLAN_80211 && USB && EXPERIMENTAL && !4KSTACKS default n ---help--- This is highly experimental driver for winbond wifi card on some Kohjinsha notebooks diff --git a/drivers/staging/winbond/README b/drivers/staging/winbond/README index 707b6b354dc5..cb944e4bf174 100644 --- a/drivers/staging/winbond/README +++ b/drivers/staging/winbond/README @@ -5,6 +5,7 @@ TODO: - remove typedefs - remove unused ioctls - use cfg80211 for regulatory stuff + - fix 4k stack problems Please send patches to Greg Kroah-Hartman <greg@kroah.com> and Pavel Machek <pavel@suse.cz> diff --git a/drivers/staging/winbond/bss_f.h b/drivers/staging/winbond/bss_f.h index c957bc94f08d..013183153993 100644 --- a/drivers/staging/winbond/bss_f.h +++ b/drivers/staging/winbond/bss_f.h @@ -24,7 +24,7 @@ void DesiredRate2InfoElement(PWB32_ADAPTER Adapter, u8 *addr, u16 *iFildOffset, u8 *pBasicRateSet, u8 BasicRateCount, u8 *pOperationRateSet, u8 OperationRateCount); void BSSAddIBSSdata(PWB32_ADAPTER Adapter, PWB_BSSDESCRIPTION psDesData); -unsigned char boCmpMacAddr( PUCHAR, PUCHAR ); +unsigned char boCmpMacAddr( u8 *, u8 *); unsigned char boCmpSSID(struct SSID_Element *psSSID1, struct SSID_Element *psSSID2); u16 wBSSfindSSID(PWB32_ADAPTER Adapter, struct SSID_Element *psSsid); u16 wRoamingQuery(PWB32_ADAPTER Adapter); @@ -42,11 +42,11 @@ void RateReSortForSRate(PWB32_ADAPTER Adapter, u8 *RateArray, u8 num); void Assemble_IE(PWB32_ADAPTER Adapter, u16 wBssIdx); void SetMaxTxRate(PWB32_ADAPTER Adapter); -void CreateWpaIE(PWB32_ADAPTER Adapter, u16* iFildOffset, PUCHAR msg, struct Management_Frame* msgHeader, +void CreateWpaIE(PWB32_ADAPTER Adapter, u16* iFildOffset, u8 *msg, struct Management_Frame* msgHeader, struct Association_Request_Frame_Body* msgBody, u16 iMSindex); //added by WS 05/14/05 #ifdef _WPA2_ -void CreateRsnIE(PWB32_ADAPTER Adapter, u16* iFildOffset, PUCHAR msg, struct Management_Frame* msgHeader, +void CreateRsnIE(PWB32_ADAPTER Adapter, u16* iFildOffset, u8 *msg, struct Management_Frame* msgHeader, struct Association_Request_Frame_Body* msgBody, u16 iMSindex);//added by WS 05/14/05 u16 SearchPmkid(PWB32_ADAPTER Adapter, struct Management_Frame* msgHeader, diff --git a/drivers/staging/winbond/ds_tkip.h b/drivers/staging/winbond/ds_tkip.h index 29e5055b45a1..6841d66e7e8c 100644 --- a/drivers/staging/winbond/ds_tkip.h +++ b/drivers/staging/winbond/ds_tkip.h @@ -25,9 +25,9 @@ typedef struct tkip s32 bytes_in_M; // # bytes in M } tkip_t; -//void _append_data( PUCHAR pData, u16 size, tkip_t *p ); -void Mds_MicGet( void* Adapter, void* pRxLayer1, PUCHAR pKey, PUCHAR pMic ); -void Mds_MicFill( void* Adapter, void* pDes, PUCHAR XmitBufAddress ); +//void _append_data( u8 *pData, u16 size, tkip_t *p ); +void Mds_MicGet( void* Adapter, void* pRxLayer1, u8 *pKey, u8 *pMic ); +void Mds_MicFill( void* Adapter, void* pDes, u8 *XmitBufAddress ); diff --git a/drivers/staging/winbond/linux/common.h b/drivers/staging/winbond/linux/common.h index 6b00bad74f78..712a86cfa68b 100644 --- a/drivers/staging/winbond/linux/common.h +++ b/drivers/staging/winbond/linux/common.h @@ -39,14 +39,6 @@ // Common type definition //=============================================================== -typedef u8* PUCHAR; -typedef s8* PCHAR; -typedef u8* PBOOLEAN; -typedef u16* PUSHORT; -typedef u32* PULONG; -typedef s16* PSHORT; - - //=========================================== #define IGNORE 2 #define SUCCESS 1 @@ -110,16 +102,9 @@ typedef struct urb * PURB; #define OS_ATOMIC_READ( _A, _V ) _V #define OS_ATOMIC_INC( _A, _V ) EncapAtomicInc( _A, (void*)_V ) #define OS_ATOMIC_DEC( _A, _V ) EncapAtomicDec( _A, (void*)_V ) -#define OS_MEMORY_CLEAR( _A, _S ) memset( (PUCHAR)_A,0,_S) +#define OS_MEMORY_CLEAR( _A, _S ) memset( (u8 *)_A,0,_S) #define OS_MEMORY_COMPARE( _A, _B, _S ) (memcmp(_A,_B,_S)? 0 : 1) // Definition is reverse with Ndis 1: the same 0: different - -#define OS_SPIN_LOCK spinlock_t -#define OS_SPIN_LOCK_ALLOCATE( _S ) spin_lock_init( _S ); -#define OS_SPIN_LOCK_FREE( _S ) -#define OS_SPIN_LOCK_ACQUIRED( _S ) spin_lock_irq( _S ) -#define OS_SPIN_LOCK_RELEASED( _S ) spin_unlock_irq( _S ); - #define OS_TIMER struct timer_list #define OS_TIMER_INITIAL( _T, _F, _P ) \ { \ diff --git a/drivers/staging/winbond/linux/wb35reg.c b/drivers/staging/winbond/linux/wb35reg.c index 2c0b454e8cad..ebb6db5438a4 100644 --- a/drivers/staging/winbond/linux/wb35reg.c +++ b/drivers/staging/winbond/linux/wb35reg.c @@ -10,7 +10,7 @@ extern void phy_calibration_winbond(hw_data_t *phw_data, u32 frequency); // Flag : AUTO_INCREMENT - RegisterNo will auto increment 4 // NO_INCREMENT - Function will write data into the same register unsigned char -Wb35Reg_BurstWrite(phw_data_t pHwData, u16 RegisterNo, PULONG pRegisterData, u8 NumberOfData, u8 Flag) +Wb35Reg_BurstWrite(phw_data_t pHwData, u16 RegisterNo, u32 * pRegisterData, u8 NumberOfData, u8 Flag) { PWB35REG pWb35Reg = &pHwData->Wb35Reg; PURB pUrb = NULL; @@ -30,13 +30,13 @@ Wb35Reg_BurstWrite(phw_data_t pHwData, u16 RegisterNo, PULONG pRegisterData, u8 if( pUrb && pRegQueue ) { pRegQueue->DIRECT = 2;// burst write register pRegQueue->INDEX = RegisterNo; - pRegQueue->pBuffer = (PULONG)((PUCHAR)pRegQueue + sizeof(REG_QUEUE)); + pRegQueue->pBuffer = (u32 *)((u8 *)pRegQueue + sizeof(REG_QUEUE)); memcpy( pRegQueue->pBuffer, pRegisterData, DataSize ); //the function for reversing register data from little endian to big endian for( i=0; i<NumberOfData ; i++ ) pRegQueue->pBuffer[i] = cpu_to_le32( pRegQueue->pBuffer[i] ); - dr = (struct usb_ctrlrequest *)((PUCHAR)pRegQueue + sizeof(REG_QUEUE) + DataSize); + dr = (struct usb_ctrlrequest *)((u8 *)pRegQueue + sizeof(REG_QUEUE) + DataSize); dr->bRequestType = USB_TYPE_VENDOR | USB_DIR_OUT | USB_RECIP_DEVICE; dr->bRequest = 0x04; // USB or vendor-defined request code, burst mode dr->wValue = cpu_to_le16( Flag ); // 0: Register number auto-increment, 1: No auto increment @@ -46,14 +46,14 @@ Wb35Reg_BurstWrite(phw_data_t pHwData, u16 RegisterNo, PULONG pRegisterData, u8 pRegQueue->pUsbReq = dr; pRegQueue->pUrb = pUrb; - OS_SPIN_LOCK_ACQUIRED( &pWb35Reg->EP0VM_spin_lock ); + spin_lock_irq( &pWb35Reg->EP0VM_spin_lock ); if (pWb35Reg->pRegFirst == NULL) pWb35Reg->pRegFirst = pRegQueue; else pWb35Reg->pRegLast->Next = pRegQueue; pWb35Reg->pRegLast = pRegQueue; - OS_SPIN_LOCK_RELEASED( &pWb35Reg->EP0VM_spin_lock ); + spin_unlock_irq( &pWb35Reg->EP0VM_spin_lock ); // Start EP0VM Wb35Reg_EP0VM_start(pHwData); @@ -181,7 +181,7 @@ Wb35Reg_Write( phw_data_t pHwData, u16 RegisterNo, u32 RegisterValue ) pRegQueue->INDEX = RegisterNo; pRegQueue->VALUE = cpu_to_le32(RegisterValue); pRegQueue->RESERVED_VALID = FALSE; - dr = (struct usb_ctrlrequest *)((PUCHAR)pRegQueue + sizeof(REG_QUEUE)); + dr = (struct usb_ctrlrequest *)((u8 *)pRegQueue + sizeof(REG_QUEUE)); dr->bRequestType = USB_TYPE_VENDOR|USB_DIR_OUT |USB_RECIP_DEVICE; dr->bRequest = 0x03; // USB or vendor-defined request code, burst mode dr->wValue = cpu_to_le16(0x0); @@ -193,14 +193,14 @@ Wb35Reg_Write( phw_data_t pHwData, u16 RegisterNo, u32 RegisterValue ) pRegQueue->pUsbReq = dr; pRegQueue->pUrb = pUrb; - OS_SPIN_LOCK_ACQUIRED(&pWb35Reg->EP0VM_spin_lock ); + spin_lock_irq(&pWb35Reg->EP0VM_spin_lock ); if (pWb35Reg->pRegFirst == NULL) pWb35Reg->pRegFirst = pRegQueue; else pWb35Reg->pRegLast->Next = pRegQueue; pWb35Reg->pRegLast = pRegQueue; - OS_SPIN_LOCK_RELEASED( &pWb35Reg->EP0VM_spin_lock ); + spin_unlock_irq( &pWb35Reg->EP0VM_spin_lock ); // Start EP0VM Wb35Reg_EP0VM_start(pHwData); @@ -220,7 +220,7 @@ Wb35Reg_Write( phw_data_t pHwData, u16 RegisterNo, u32 RegisterValue ) // FALSE : register not support unsigned char Wb35Reg_WriteWithCallbackValue( phw_data_t pHwData, u16 RegisterNo, u32 RegisterValue, - PCHAR pValue, s8 Len) + s8 *pValue, s8 Len) { PWB35REG pWb35Reg = &pHwData->Wb35Reg; struct usb_ctrlrequest *dr; @@ -243,7 +243,7 @@ Wb35Reg_WriteWithCallbackValue( phw_data_t pHwData, u16 RegisterNo, u32 Register //NOTE : Users must guarantee the size of value will not exceed the buffer size. memcpy(pRegQueue->RESERVED, pValue, Len); pRegQueue->RESERVED_VALID = TRUE; - dr = (struct usb_ctrlrequest *)((PUCHAR)pRegQueue + sizeof(REG_QUEUE)); + dr = (struct usb_ctrlrequest *)((u8 *)pRegQueue + sizeof(REG_QUEUE)); dr->bRequestType = USB_TYPE_VENDOR|USB_DIR_OUT |USB_RECIP_DEVICE; dr->bRequest = 0x03; // USB or vendor-defined request code, burst mode dr->wValue = cpu_to_le16(0x0); @@ -254,14 +254,14 @@ Wb35Reg_WriteWithCallbackValue( phw_data_t pHwData, u16 RegisterNo, u32 Register pRegQueue->Next = NULL; pRegQueue->pUsbReq = dr; pRegQueue->pUrb = pUrb; - OS_SPIN_LOCK_ACQUIRED (&pWb35Reg->EP0VM_spin_lock ); + spin_lock_irq (&pWb35Reg->EP0VM_spin_lock ); if( pWb35Reg->pRegFirst == NULL ) pWb35Reg->pRegFirst = pRegQueue; else pWb35Reg->pRegLast->Next = pRegQueue; pWb35Reg->pRegLast = pRegQueue; - OS_SPIN_LOCK_RELEASED ( &pWb35Reg->EP0VM_spin_lock ); + spin_unlock_irq ( &pWb35Reg->EP0VM_spin_lock ); // Start EP0VM Wb35Reg_EP0VM_start(pHwData); @@ -278,10 +278,10 @@ Wb35Reg_WriteWithCallbackValue( phw_data_t pHwData, u16 RegisterNo, u32 Register // FALSE : register not support // pRegisterValue : It must be a resident buffer due to asynchronous read register. unsigned char -Wb35Reg_ReadSync( phw_data_t pHwData, u16 RegisterNo, PULONG pRegisterValue ) +Wb35Reg_ReadSync( phw_data_t pHwData, u16 RegisterNo, u32 * pRegisterValue ) { PWB35REG pWb35Reg = &pHwData->Wb35Reg; - PULONG pltmp = pRegisterValue; + u32 * pltmp = pRegisterValue; int ret = -1; // Module shutdown @@ -327,7 +327,7 @@ Wb35Reg_ReadSync( phw_data_t pHwData, u16 RegisterNo, PULONG pRegisterValue // FALSE : register not support // pRegisterValue : It must be a resident buffer due to asynchronous read register. unsigned char -Wb35Reg_Read(phw_data_t pHwData, u16 RegisterNo, PULONG pRegisterValue ) +Wb35Reg_Read(phw_data_t pHwData, u16 RegisterNo, u32 * pRegisterValue ) { PWB35REG pWb35Reg = &pHwData->Wb35Reg; struct usb_ctrlrequest * dr; @@ -348,7 +348,7 @@ Wb35Reg_Read(phw_data_t pHwData, u16 RegisterNo, PULONG pRegisterValue ) pRegQueue->DIRECT = 0;// read register pRegQueue->INDEX = RegisterNo; pRegQueue->pBuffer = pRegisterValue; - dr = (struct usb_ctrlrequest *)((PUCHAR)pRegQueue + sizeof(REG_QUEUE)); + dr = (struct usb_ctrlrequest *)((u8 *)pRegQueue + sizeof(REG_QUEUE)); dr->bRequestType = USB_TYPE_VENDOR|USB_RECIP_DEVICE|USB_DIR_IN; dr->bRequest = 0x01; // USB or vendor-defined request code, burst mode dr->wValue = cpu_to_le16(0x0); @@ -359,14 +359,14 @@ Wb35Reg_Read(phw_data_t pHwData, u16 RegisterNo, PULONG pRegisterValue ) pRegQueue->Next = NULL; pRegQueue->pUsbReq = dr; pRegQueue->pUrb = pUrb; - OS_SPIN_LOCK_ACQUIRED ( &pWb35Reg->EP0VM_spin_lock ); + spin_lock_irq ( &pWb35Reg->EP0VM_spin_lock ); if( pWb35Reg->pRegFirst == NULL ) pWb35Reg->pRegFirst = pRegQueue; else pWb35Reg->pRegLast->Next = pRegQueue; pWb35Reg->pRegLast = pRegQueue; - OS_SPIN_LOCK_RELEASED( &pWb35Reg->EP0VM_spin_lock ); + spin_unlock_irq( &pWb35Reg->EP0VM_spin_lock ); // Start EP0VM Wb35Reg_EP0VM_start( pHwData ); @@ -399,7 +399,7 @@ Wb35Reg_EP0VM(phw_data_t pHwData ) PWB35REG pWb35Reg = &pHwData->Wb35Reg; PURB pUrb; struct usb_ctrlrequest *dr; - PULONG pBuffer; + u32 * pBuffer; int ret = -1; PREG_QUEUE pRegQueue; @@ -411,9 +411,9 @@ Wb35Reg_EP0VM(phw_data_t pHwData ) goto cleanup; // Get the register data and send to USB through Irp - OS_SPIN_LOCK_ACQUIRED( &pWb35Reg->EP0VM_spin_lock ); + spin_lock_irq( &pWb35Reg->EP0VM_spin_lock ); pRegQueue = pWb35Reg->pRegFirst; - OS_SPIN_LOCK_RELEASED( &pWb35Reg->EP0VM_spin_lock ); + spin_unlock_irq( &pWb35Reg->EP0VM_spin_lock ); if (!pRegQueue) goto cleanup; @@ -429,7 +429,7 @@ Wb35Reg_EP0VM(phw_data_t pHwData ) usb_fill_control_urb( pUrb, pHwData->WbUsb.udev, REG_DIRECTION(pHwData->WbUsb.udev,pRegQueue), - (PUCHAR)dr,pBuffer,cpu_to_le16(dr->wLength), + (u8 *)dr,pBuffer,cpu_to_le16(dr->wLength), Wb35Reg_EP0VM_complete, (void*)pHwData); pWb35Reg->EP0vm_state = VM_RUNNING; @@ -468,12 +468,12 @@ Wb35Reg_EP0VM_complete(PURB pUrb) OS_ATOMIC_DEC( pHwData->Adapter, &pWb35Reg->RegFireCount ); } else { // Complete to send, remove the URB from the first - OS_SPIN_LOCK_ACQUIRED( &pWb35Reg->EP0VM_spin_lock ); + spin_lock_irq( &pWb35Reg->EP0VM_spin_lock ); pRegQueue = pWb35Reg->pRegFirst; if (pRegQueue == pWb35Reg->pRegLast) pWb35Reg->pRegLast = NULL; pWb35Reg->pRegFirst = pWb35Reg->pRegFirst->Next; - OS_SPIN_LOCK_RELEASED( &pWb35Reg->EP0VM_spin_lock ); + spin_unlock_irq( &pWb35Reg->EP0VM_spin_lock ); if (pWb35Reg->EP0VM_status) { #ifdef _PE_REG_DUMP_ @@ -513,7 +513,7 @@ Wb35Reg_destroy(phw_data_t pHwData) OS_SLEEP(10000); // Delay for waiting function enter 940623.1.b // Release all the data in RegQueue - OS_SPIN_LOCK_ACQUIRED( &pWb35Reg->EP0VM_spin_lock ); + spin_lock_irq( &pWb35Reg->EP0VM_spin_lock ); pRegQueue = pWb35Reg->pRegFirst; while (pRegQueue) { if (pRegQueue == pWb35Reg->pRegLast) @@ -521,7 +521,7 @@ Wb35Reg_destroy(phw_data_t pHwData) pWb35Reg->pRegFirst = pWb35Reg->pRegFirst->Next; pUrb = pRegQueue->pUrb; - OS_SPIN_LOCK_RELEASED( &pWb35Reg->EP0VM_spin_lock ); + spin_unlock_irq( &pWb35Reg->EP0VM_spin_lock ); if (pUrb) { usb_free_urb(pUrb); kfree(pRegQueue); @@ -530,14 +530,11 @@ Wb35Reg_destroy(phw_data_t pHwData) WBDEBUG(("EP0 queue release error\n")); #endif } - OS_SPIN_LOCK_ACQUIRED( &pWb35Reg->EP0VM_spin_lock ); + spin_lock_irq( &pWb35Reg->EP0VM_spin_lock ); pRegQueue = pWb35Reg->pRegFirst; } - OS_SPIN_LOCK_RELEASED( &pWb35Reg->EP0VM_spin_lock ); - - // Free resource - OS_SPIN_LOCK_FREE( &pWb35Reg->EP0VM_spin_lock ); + spin_unlock_irq( &pWb35Reg->EP0VM_spin_lock ); } //==================================================================================== @@ -550,7 +547,7 @@ unsigned char Wb35Reg_initial(phw_data_t pHwData) u32 SoftwareSet, VCO_trim, TxVga, Region_ScanInterval; // Spin lock is acquired for read and write IRP command - OS_SPIN_LOCK_ALLOCATE( &pWb35Reg->EP0VM_spin_lock ); + spin_lock_init( &pWb35Reg->EP0VM_spin_lock ); // Getting RF module type from EEPROM ------------------------------------ Wb35Reg_WriteSync( pHwData, 0x03b4, 0x080d0000 ); // Start EEPROM access + Read + address(0x0d) @@ -655,7 +652,7 @@ unsigned char Wb35Reg_initial(phw_data_t pHwData) // version in _GENREQ.ASM of the DWB NE1000/2000 driver. //================================================================================== u32 -CardComputeCrc(PUCHAR Buffer, u32 Length) +CardComputeCrc(u8 * Buffer, u32 Length) { u32 Crc, Carry; u32 i, j; diff --git a/drivers/staging/winbond/linux/wb35reg_f.h b/drivers/staging/winbond/linux/wb35reg_f.h index 38e2906b51a7..3006cfe99ccd 100644 --- a/drivers/staging/winbond/linux/wb35reg_f.h +++ b/drivers/staging/winbond/linux/wb35reg_f.h @@ -29,16 +29,16 @@ void EEPROMTxVgaAdjust( phw_data_t pHwData ); // 20060619.5 Add void Wb35Reg_destroy( phw_data_t pHwData ); -unsigned char Wb35Reg_Read( phw_data_t pHwData, u16 RegisterNo, PULONG pRegisterValue ); -unsigned char Wb35Reg_ReadSync( phw_data_t pHwData, u16 RegisterNo, PULONG pRegisterValue ); +unsigned char Wb35Reg_Read( phw_data_t pHwData, u16 RegisterNo, u32 * pRegisterValue ); +unsigned char Wb35Reg_ReadSync( phw_data_t pHwData, u16 RegisterNo, u32 * pRegisterValue ); unsigned char Wb35Reg_Write( phw_data_t pHwData, u16 RegisterNo, u32 RegisterValue ); unsigned char Wb35Reg_WriteSync( phw_data_t pHwData, u16 RegisterNo, u32 RegisterValue ); unsigned char Wb35Reg_WriteWithCallbackValue( phw_data_t pHwData, u16 RegisterNo, u32 RegisterValue, - PCHAR pValue, - s8 Len); -unsigned char Wb35Reg_BurstWrite( phw_data_t pHwData, u16 RegisterNo, PULONG pRegisterData, u8 NumberOfData, u8 Flag ); + s8 *pValue, + s8 Len); +unsigned char Wb35Reg_BurstWrite( phw_data_t pHwData, u16 RegisterNo, u32 * pRegisterData, u8 NumberOfData, u8 Flag ); void Wb35Reg_EP0VM( phw_data_t pHwData ); void Wb35Reg_EP0VM_start( phw_data_t pHwData ); @@ -47,7 +47,7 @@ void Wb35Reg_EP0VM_complete( PURB pUrb ); u32 BitReverse( u32 dwData, u32 DataLength); void CardGetMulticastBit( u8 Address[MAC_ADDR_LENGTH], u8 *Byte, u8 *Value ); -u32 CardComputeCrc( PUCHAR Buffer, u32 Length ); +u32 CardComputeCrc( u8 * Buffer, u32 Length ); void Wb35Reg_phy_calibration( phw_data_t pHwData ); void Wb35Reg_Update( phw_data_t pHwData, u16 RegisterNo, u32 RegisterValue ); diff --git a/drivers/staging/winbond/linux/wb35reg_s.h b/drivers/staging/winbond/linux/wb35reg_s.h index a7595b1e7336..8b35b93f7f02 100644 --- a/drivers/staging/winbond/linux/wb35reg_s.h +++ b/drivers/staging/winbond/linux/wb35reg_s.h @@ -75,7 +75,7 @@ typedef struct _REG_QUEUE union { u32 VALUE; - PULONG pBuffer; + u32 * pBuffer; }; u8 RESERVED[4];// space reserved for communication @@ -143,7 +143,7 @@ typedef struct _WB35REG //------------------- // VM //------------------- - OS_SPIN_LOCK EP0VM_spin_lock; // 4B + spinlock_t EP0VM_spin_lock; // 4B u32 EP0VM_status;//$$ PREG_QUEUE pRegFirst; PREG_QUEUE pRegLast; diff --git a/drivers/staging/winbond/linux/wb35rx.c b/drivers/staging/winbond/linux/wb35rx.c index 26157eb3d5a2..b4b9f5f371d9 100644 --- a/drivers/staging/winbond/linux/wb35rx.c +++ b/drivers/staging/winbond/linux/wb35rx.c @@ -27,7 +27,7 @@ void Wb35Rx_start(phw_data_t pHwData) void Wb35Rx( phw_data_t pHwData ) { PWB35RX pWb35Rx = &pHwData->Wb35Rx; - PUCHAR pRxBufferAddress; + u8 * pRxBufferAddress; PURB pUrb = (PURB)pWb35Rx->RxUrb; int retv; u32 RxBufferId; @@ -35,51 +35,50 @@ void Wb35Rx( phw_data_t pHwData ) // // Issuing URB // - do { - if (pHwData->SurpriseRemove || pHwData->HwStop) - break; + if (pHwData->SurpriseRemove || pHwData->HwStop) + goto error; - if (pWb35Rx->rx_halt) - break; + if (pWb35Rx->rx_halt) + goto error; - // Get RxBuffer's ID - RxBufferId = pWb35Rx->RxBufferId; - if (!pWb35Rx->RxOwner[RxBufferId]) { - // It's impossible to run here. - #ifdef _PE_RX_DUMP_ - WBDEBUG(("Rx driver fifo unavailable\n")); - #endif - break; - } + // Get RxBuffer's ID + RxBufferId = pWb35Rx->RxBufferId; + if (!pWb35Rx->RxOwner[RxBufferId]) { + // It's impossible to run here. + #ifdef _PE_RX_DUMP_ + WBDEBUG(("Rx driver fifo unavailable\n")); + #endif + goto error; + } - // Update buffer point, then start to bulkin the data from USB - pWb35Rx->RxBufferId++; - pWb35Rx->RxBufferId %= MAX_USB_RX_BUFFER_NUMBER; + // Update buffer point, then start to bulkin the data from USB + pWb35Rx->RxBufferId++; + pWb35Rx->RxBufferId %= MAX_USB_RX_BUFFER_NUMBER; - pWb35Rx->CurrentRxBufferId = RxBufferId; + pWb35Rx->CurrentRxBufferId = RxBufferId; - if (1 != OS_MEMORY_ALLOC((void* *)&pWb35Rx->pDRx, MAX_USB_RX_BUFFER)) { - printk("w35und: Rx memory alloc failed\n"); - break; - } - pRxBufferAddress = pWb35Rx->pDRx; + if (1 != OS_MEMORY_ALLOC((void* *)&pWb35Rx->pDRx, MAX_USB_RX_BUFFER)) { + printk("w35und: Rx memory alloc failed\n"); + goto error; + } + pRxBufferAddress = pWb35Rx->pDRx; - usb_fill_bulk_urb(pUrb, pHwData->WbUsb.udev, - usb_rcvbulkpipe(pHwData->WbUsb.udev, 3), - pRxBufferAddress, MAX_USB_RX_BUFFER, - Wb35Rx_Complete, pHwData); + usb_fill_bulk_urb(pUrb, pHwData->WbUsb.udev, + usb_rcvbulkpipe(pHwData->WbUsb.udev, 3), + pRxBufferAddress, MAX_USB_RX_BUFFER, + Wb35Rx_Complete, pHwData); - pWb35Rx->EP3vm_state = VM_RUNNING; + pWb35Rx->EP3vm_state = VM_RUNNING; - retv = wb_usb_submit_urb(pUrb); + retv = wb_usb_submit_urb(pUrb); - if (retv != 0) { - printk("Rx URB sending error\n"); - break; - } - return; - } while(FALSE); + if (retv != 0) { + printk("Rx URB sending error\n"); + goto error; + } + return; +error: // VM stop pWb35Rx->EP3vm_state = VM_STOP; OS_ATOMIC_DEC( pHwData->Adapter, &pWb35Rx->RxFireCounter ); @@ -89,7 +88,7 @@ void Wb35Rx_Complete(PURB pUrb) { phw_data_t pHwData = pUrb->context; PWB35RX pWb35Rx = &pHwData->Wb35Rx; - PUCHAR pRxBufferAddress; + u8 * pRxBufferAddress; u32 SizeCheck; u16 BulkLength; u32 RxBufferId; @@ -99,65 +98,63 @@ void Wb35Rx_Complete(PURB pUrb) pWb35Rx->EP3vm_state = VM_COMPLETED; pWb35Rx->EP3VM_status = pUrb->status;//Store the last result of Irp - do { - RxBufferId = pWb35Rx->CurrentRxBufferId; + RxBufferId = pWb35Rx->CurrentRxBufferId; - pRxBufferAddress = pWb35Rx->pDRx; - BulkLength = (u16)pUrb->actual_length; + pRxBufferAddress = pWb35Rx->pDRx; + BulkLength = (u16)pUrb->actual_length; - // The IRP is completed - pWb35Rx->EP3vm_state = VM_COMPLETED; + // The IRP is completed + pWb35Rx->EP3vm_state = VM_COMPLETED; - if (pHwData->SurpriseRemove || pHwData->HwStop) // Must be here, or RxBufferId is invalid - break; + if (pHwData->SurpriseRemove || pHwData->HwStop) // Must be here, or RxBufferId is invalid + goto error; - if (pWb35Rx->rx_halt) - break; + if (pWb35Rx->rx_halt) + goto error; - // Start to process the data only in successful condition - pWb35Rx->RxOwner[ RxBufferId ] = 0; // Set the owner to driver - R00.value = le32_to_cpu(*(PULONG)pRxBufferAddress); + // Start to process the data only in successful condition + pWb35Rx->RxOwner[ RxBufferId ] = 0; // Set the owner to driver + R00.value = le32_to_cpu(*(u32 *)pRxBufferAddress); - // The URB is completed, check the result - if (pWb35Rx->EP3VM_status != 0) { - #ifdef _PE_USB_STATE_DUMP_ - WBDEBUG(("EP3 IoCompleteRoutine return error\n")); - DebugUsbdStatusInformation( pWb35Rx->EP3VM_status ); - #endif - pWb35Rx->EP3vm_state = VM_STOP; - break; - } + // The URB is completed, check the result + if (pWb35Rx->EP3VM_status != 0) { + #ifdef _PE_USB_STATE_DUMP_ + WBDEBUG(("EP3 IoCompleteRoutine return error\n")); + DebugUsbdStatusInformation( pWb35Rx->EP3VM_status ); + #endif + pWb35Rx->EP3vm_state = VM_STOP; + goto error; + } - // 20060220 For recovering. check if operating in single USB mode - if (!HAL_USB_MODE_BURST(pHwData)) { - SizeCheck = R00.R00_receive_byte_count; //20060926 anson's endian - if ((SizeCheck & 0x03) > 0) - SizeCheck -= 4; - SizeCheck = (SizeCheck + 3) & ~0x03; - SizeCheck += 12; // 8 + 4 badbeef - if ((BulkLength > 1600) || - (SizeCheck > 1600) || - (BulkLength != SizeCheck) || - (BulkLength == 0)) { // Add for fail Urb - pWb35Rx->EP3vm_state = VM_STOP; - pWb35Rx->Ep3ErrorCount2++; - } + // 20060220 For recovering. check if operating in single USB mode + if (!HAL_USB_MODE_BURST(pHwData)) { + SizeCheck = R00.R00_receive_byte_count; //20060926 anson's endian + if ((SizeCheck & 0x03) > 0) + SizeCheck -= 4; + SizeCheck = (SizeCheck + 3) & ~0x03; + SizeCheck += 12; // 8 + 4 badbeef + if ((BulkLength > 1600) || + (SizeCheck > 1600) || + (BulkLength != SizeCheck) || + (BulkLength == 0)) { // Add for fail Urb + pWb35Rx->EP3vm_state = VM_STOP; + pWb35Rx->Ep3ErrorCount2++; } + } - // Indicating the receiving data - pWb35Rx->ByteReceived += BulkLength; - pWb35Rx->RxBufferSize[ RxBufferId ] = BulkLength; - - if (!pWb35Rx->RxOwner[ RxBufferId ]) - Wb35Rx_indicate(pHwData); + // Indicating the receiving data + pWb35Rx->ByteReceived += BulkLength; + pWb35Rx->RxBufferSize[ RxBufferId ] = BulkLength; - kfree(pWb35Rx->pDRx); - // Do the next receive - Wb35Rx(pHwData); - return; + if (!pWb35Rx->RxOwner[ RxBufferId ]) + Wb35Rx_indicate(pHwData); - } while(FALSE); + kfree(pWb35Rx->pDRx); + // Do the next receive + Wb35Rx(pHwData); + return; +error: pWb35Rx->RxOwner[ RxBufferId ] = 1; // Set the owner to hardware OS_ATOMIC_DEC( pHwData->Adapter, &pWb35Rx->RxFireCounter ); pWb35Rx->EP3vm_state = VM_STOP; @@ -223,7 +220,7 @@ void Wb35Rx_reset_descriptor( phw_data_t pHwData ) void Wb35Rx_adjust(PDESCRIPTOR pRxDes) { - PULONG pRxBufferAddress; + u32 * pRxBufferAddress; u32 DecryptionMethod; u32 i; u16 BufferSize; @@ -264,7 +261,7 @@ u16 Wb35Rx_indicate(phw_data_t pHwData) { DESCRIPTOR RxDes; PWB35RX pWb35Rx = &pHwData->Wb35Rx; - PUCHAR pRxBufferAddress; + u8 * pRxBufferAddress; u16 PacketSize; u16 stmp, BufferSize, stmp2 = 0; u32 RxBufferId; @@ -283,13 +280,13 @@ u16 Wb35Rx_indicate(phw_data_t pHwData) // Parse the bulkin buffer while (BufferSize >= 4) { - if ((cpu_to_le32(*(PULONG)pRxBufferAddress) & 0x0fffffff) == RX_END_TAG) //Is ending? 921002.9.a + if ((cpu_to_le32(*(u32 *)pRxBufferAddress) & 0x0fffffff) == RX_END_TAG) //Is ending? 921002.9.a break; // Get the R00 R01 first - RxDes.R00.value = le32_to_cpu(*(PULONG)pRxBufferAddress); + RxDes.R00.value = le32_to_cpu(*(u32 *)pRxBufferAddress); PacketSize = (u16)RxDes.R00.R00_receive_byte_count; - RxDes.R01.value = le32_to_cpu(*((PULONG)(pRxBufferAddress+4))); + RxDes.R01.value = le32_to_cpu(*((u32 *)(pRxBufferAddress+4))); // For new DMA 4k if ((PacketSize & 0x03) > 0) PacketSize -= 4; diff --git a/drivers/staging/winbond/linux/wb35rx_s.h b/drivers/staging/winbond/linux/wb35rx_s.h index 53b831fdeb78..b90c269e6adb 100644 --- a/drivers/staging/winbond/linux/wb35rx_s.h +++ b/drivers/staging/winbond/linux/wb35rx_s.h @@ -41,7 +41,7 @@ typedef struct _WB35RX u32 Ep3ErrorCount2; // 20060625.1 Usbd for Rx DMA error count int EP3VM_status; - PUCHAR pDRx; + u8 * pDRx; } WB35RX, *PWB35RX; diff --git a/drivers/staging/winbond/linux/wb35tx.c b/drivers/staging/winbond/linux/wb35tx.c index cf19c3bc524a..ba9d51244e29 100644 --- a/drivers/staging/winbond/linux/wb35tx.c +++ b/drivers/staging/winbond/linux/wb35tx.c @@ -12,7 +12,7 @@ unsigned char -Wb35Tx_get_tx_buffer(phw_data_t pHwData, PUCHAR *pBuffer ) +Wb35Tx_get_tx_buffer(phw_data_t pHwData, u8 **pBuffer) { PWB35TX pWb35Tx = &pHwData->Wb35Tx; @@ -37,7 +37,7 @@ void Wb35Tx(phw_data_t pHwData) { PWB35TX pWb35Tx = &pHwData->Wb35Tx; PADAPTER Adapter = pHwData->Adapter; - PUCHAR pTxBufferAddress; + u8 *pTxBufferAddress; PMDS pMds = &Adapter->Mds; struct urb * pUrb = (struct urb *)pWb35Tx->Tx4Urb; int retv; @@ -100,25 +100,24 @@ void Wb35Tx_complete(struct urb * pUrb) pWb35Tx->TxSendIndex++; pWb35Tx->TxSendIndex %= MAX_USB_TX_BUFFER_NUMBER; - do { - if (pHwData->SurpriseRemove || pHwData->HwStop) // Let WbWlanHalt to handle surprise remove - break; + if (pHwData->SurpriseRemove || pHwData->HwStop) // Let WbWlanHalt to handle surprise remove + goto error; - if (pWb35Tx->tx_halt) - break; + if (pWb35Tx->tx_halt) + goto error; - // The URB is completed, check the result - if (pWb35Tx->EP4VM_status != 0) { - printk("URB submission failed\n"); - pWb35Tx->EP4vm_state = VM_STOP; - break; // Exit while(FALSE); - } + // The URB is completed, check the result + if (pWb35Tx->EP4VM_status != 0) { + printk("URB submission failed\n"); + pWb35Tx->EP4vm_state = VM_STOP; + goto error; + } - Mds_Tx(Adapter); - Wb35Tx(pHwData); - return; - } while(FALSE); + Mds_Tx(Adapter); + Wb35Tx(pHwData); + return; +error: OS_ATOMIC_DEC( pHwData->Adapter, &pWb35Tx->TxFireCounter ); pWb35Tx->EP4vm_state = VM_STOP; } @@ -225,36 +224,33 @@ void Wb35Tx_EP2VM(phw_data_t pHwData) { PWB35TX pWb35Tx = &pHwData->Wb35Tx; struct urb * pUrb = (struct urb *)pWb35Tx->Tx2Urb; - PULONG pltmp = (PULONG)pWb35Tx->EP2_buf; + u32 * pltmp = (u32 *)pWb35Tx->EP2_buf; int retv; - do { - if (pHwData->SurpriseRemove || pHwData->HwStop) - break; - - if (pWb35Tx->tx_halt) - break; - - // - // Issuing URB - // - usb_fill_int_urb( pUrb, pHwData->WbUsb.udev, usb_rcvintpipe(pHwData->WbUsb.udev,2), - pltmp, MAX_INTERRUPT_LENGTH, Wb35Tx_EP2VM_complete, pHwData, 32); + if (pHwData->SurpriseRemove || pHwData->HwStop) + goto error; - pWb35Tx->EP2vm_state = VM_RUNNING; - retv = wb_usb_submit_urb( pUrb ); + if (pWb35Tx->tx_halt) + goto error; - if(retv < 0) { - #ifdef _PE_TX_DUMP_ - WBDEBUG(("EP2 Tx Irp sending error\n")); - #endif - break; - } + // + // Issuing URB + // + usb_fill_int_urb( pUrb, pHwData->WbUsb.udev, usb_rcvintpipe(pHwData->WbUsb.udev,2), + pltmp, MAX_INTERRUPT_LENGTH, Wb35Tx_EP2VM_complete, pHwData, 32); - return; + pWb35Tx->EP2vm_state = VM_RUNNING; + retv = wb_usb_submit_urb( pUrb ); - } while(FALSE); + if (retv < 0) { + #ifdef _PE_TX_DUMP_ + WBDEBUG(("EP2 Tx Irp sending error\n")); + #endif + goto error; + } + return; +error: pWb35Tx->EP2vm_state = VM_STOP; OS_ATOMIC_DEC( pHwData->Adapter, &pWb35Tx->TxResultCount ); } @@ -266,7 +262,7 @@ void Wb35Tx_EP2VM_complete(struct urb * pUrb) T02_DESCRIPTOR T02, TSTATUS; PADAPTER Adapter = (PADAPTER)pHwData->Adapter; PWB35TX pWb35Tx = &pHwData->Wb35Tx; - PULONG pltmp = (PULONG)pWb35Tx->EP2_buf; + u32 * pltmp = (u32 *)pWb35Tx->EP2_buf; u32 i; u16 InterruptInLength; @@ -275,38 +271,36 @@ void Wb35Tx_EP2VM_complete(struct urb * pUrb) pWb35Tx->EP2vm_state = VM_COMPLETED; pWb35Tx->EP2VM_status = pUrb->status; - do { - // For Linux 2.4. Interrupt will always trigger - if( pHwData->SurpriseRemove || pHwData->HwStop ) // Let WbWlanHalt to handle surprise remove - break; - - if( pWb35Tx->tx_halt ) - break; - - //The Urb is completed, check the result - if (pWb35Tx->EP2VM_status != 0) { - WBDEBUG(("EP2 IoCompleteRoutine return error\n")); - pWb35Tx->EP2vm_state= VM_STOP; - break; // Exit while(FALSE); - } - - // Update the Tx result - InterruptInLength = pUrb->actual_length; - // Modify for minimum memory access and DWORD alignment. - T02.value = cpu_to_le32(pltmp[0]) >> 8; // [31:8] -> [24:0] - InterruptInLength -= 1;// 20051221.1.c Modify the follow for more stable - InterruptInLength >>= 2; // InterruptInLength/4 - for (i=1; i<=InterruptInLength; i++) { - T02.value |= ((cpu_to_le32(pltmp[i]) & 0xff) << 24); - - TSTATUS.value = T02.value; //20061009 anson's endian - Mds_SendComplete( Adapter, &TSTATUS ); - T02.value = cpu_to_le32(pltmp[i]) >> 8; - } - - return; - } while(FALSE); + // For Linux 2.4. Interrupt will always trigger + if (pHwData->SurpriseRemove || pHwData->HwStop) // Let WbWlanHalt to handle surprise remove + goto error; + + if (pWb35Tx->tx_halt) + goto error; + + //The Urb is completed, check the result + if (pWb35Tx->EP2VM_status != 0) { + WBDEBUG(("EP2 IoCompleteRoutine return error\n")); + pWb35Tx->EP2vm_state= VM_STOP; + goto error; + } + // Update the Tx result + InterruptInLength = pUrb->actual_length; + // Modify for minimum memory access and DWORD alignment. + T02.value = cpu_to_le32(pltmp[0]) >> 8; // [31:8] -> [24:0] + InterruptInLength -= 1;// 20051221.1.c Modify the follow for more stable + InterruptInLength >>= 2; // InterruptInLength/4 + for (i = 1; i <= InterruptInLength; i++) { + T02.value |= ((cpu_to_le32(pltmp[i]) & 0xff) << 24); + + TSTATUS.value = T02.value; //20061009 anson's endian + Mds_SendComplete( Adapter, &TSTATUS ); + T02.value = cpu_to_le32(pltmp[i]) >> 8; + } + + return; +error: OS_ATOMIC_DEC( pHwData->Adapter, &pWb35Tx->TxResultCount ); pWb35Tx->EP2vm_state = VM_STOP; } diff --git a/drivers/staging/winbond/linux/wb35tx_f.h b/drivers/staging/winbond/linux/wb35tx_f.h index 7705a8454dcb..107b12918137 100644 --- a/drivers/staging/winbond/linux/wb35tx_f.h +++ b/drivers/staging/winbond/linux/wb35tx_f.h @@ -3,7 +3,7 @@ //==================================== unsigned char Wb35Tx_initial( phw_data_t pHwData ); void Wb35Tx_destroy( phw_data_t pHwData ); -unsigned char Wb35Tx_get_tx_buffer( phw_data_t pHwData, PUCHAR *pBuffer ); +unsigned char Wb35Tx_get_tx_buffer( phw_data_t pHwData, u8 **pBuffer ); void Wb35Tx_EP2VM( phw_data_t pHwData ); void Wb35Tx_EP2VM_start( phw_data_t pHwData ); diff --git a/drivers/staging/winbond/linux/wbusb.c b/drivers/staging/winbond/linux/wbusb.c index cbad5fb05959..f4a7875f2389 100644 --- a/drivers/staging/winbond/linux/wbusb.c +++ b/drivers/staging/winbond/linux/wbusb.c @@ -6,42 +6,29 @@ #include "sysdef.h" #include <net/mac80211.h> - -MODULE_AUTHOR( DRIVER_AUTHOR ); -MODULE_DESCRIPTION( DRIVER_DESC ); +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_DESC); MODULE_LICENSE("GPL"); MODULE_VERSION("0.1"); - -//============================================================ -// vendor ID and product ID can into here for others -//============================================================ -static struct usb_device_id Id_Table[] = -{ - {USB_DEVICE( 0x0416, 0x0035 )}, - {USB_DEVICE( 0x18E8, 0x6201 )}, - {USB_DEVICE( 0x18E8, 0x6206 )}, - {USB_DEVICE( 0x18E8, 0x6217 )}, - {USB_DEVICE( 0x18E8, 0x6230 )}, - {USB_DEVICE( 0x18E8, 0x6233 )}, - {USB_DEVICE( 0x1131, 0x2035 )}, - { } +static struct usb_device_id wb35_table[] __devinitdata = { + {USB_DEVICE(0x0416, 0x0035)}, + {USB_DEVICE(0x18E8, 0x6201)}, + {USB_DEVICE(0x18E8, 0x6206)}, + {USB_DEVICE(0x18E8, 0x6217)}, + {USB_DEVICE(0x18E8, 0x6230)}, + {USB_DEVICE(0x18E8, 0x6233)}, + {USB_DEVICE(0x1131, 0x2035)}, + { 0, } }; -MODULE_DEVICE_TABLE(usb, Id_Table); +MODULE_DEVICE_TABLE(usb, wb35_table); -static struct usb_driver wb35_driver = { - .name = "w35und", - .probe = wb35_probe, - .disconnect = wb35_disconnect, - .id_table = Id_Table, -}; - -static const struct ieee80211_rate wbsoft_rates[] = { +static struct ieee80211_rate wbsoft_rates[] = { { .bitrate = 10, .flags = IEEE80211_RATE_SHORT_PREAMBLE }, }; -static const struct ieee80211_channel wbsoft_channels[] = { +static struct ieee80211_channel wbsoft_channels[] = { { .center_freq = 2412}, }; @@ -62,9 +49,22 @@ static void wbsoft_remove_interface(struct ieee80211_hw *dev, printk("wbsoft_remove interface called\n"); } -static int wbsoft_nop(void) +static void wbsoft_stop(struct ieee80211_hw *hw) +{ + printk(KERN_INFO "%s called\n", __func__); +} + +static int wbsoft_get_stats(struct ieee80211_hw *hw, + struct ieee80211_low_level_stats *stats) { - printk("wbsoft_nop called\n"); + printk(KERN_INFO "%s called\n", __func__); + return 0; +} + +static int wbsoft_get_tx_stats(struct ieee80211_hw *hw, + struct ieee80211_tx_queue_stats *stats) +{ + printk(KERN_INFO "%s called\n", __func__); return 0; } @@ -105,8 +105,7 @@ static void wbsoft_configure_filter(struct ieee80211_hw *dev, *total_flags = new_flags; } -static int wbsoft_tx(struct ieee80211_hw *dev, struct sk_buff *skb, - struct ieee80211_tx_control *control) +static int wbsoft_tx(struct ieee80211_hw *dev, struct sk_buff *skb) { char *buffer = kmalloc(skb->len, GFP_ATOMIC); printk("Sending frame %d bytes\n", skb->len); @@ -136,7 +135,7 @@ static int wbsoft_config(struct ieee80211_hw *dev, struct ieee80211_conf *conf) hal_set_current_channel(&my_adapter->sHwData, ch); hal_set_beacon_period(&my_adapter->sHwData, conf->beacon_int); // hal_set_cap_info(&my_adapter->sHwData, ?? ); -// hal_set_ssid(phw_data_t pHwData, PUCHAR pssid, u8 ssid_len); ?? +// hal_set_ssid(phw_data_t pHwData, u8 * pssid, u8 ssid_len); ?? hal_set_accept_broadcast(&my_adapter->sHwData, 1); hal_set_accept_promiscuous(&my_adapter->sHwData, 1); hal_set_accept_multicast(&my_adapter->sHwData, 1); @@ -148,7 +147,7 @@ static int wbsoft_config(struct ieee80211_hw *dev, struct ieee80211_conf *conf) // hal_start_bss(&my_adapter->sHwData, WLAN_BSSTYPE_INFRASTRUCTURE); ?? -//void hal_set_rates(phw_data_t pHwData, PUCHAR pbss_rates, +//void hal_set_rates(phw_data_t pHwData, u8 * pbss_rates, // u8 length, unsigned char basic_rate_set) return 0; @@ -171,14 +170,14 @@ static u64 wbsoft_get_tsf(struct ieee80211_hw *dev) static const struct ieee80211_ops wbsoft_ops = { .tx = wbsoft_tx, .start = wbsoft_start, /* Start can be pretty much empty as we do WbWLanInitialize() during probe? */ - .stop = wbsoft_nop, + .stop = wbsoft_stop, .add_interface = wbsoft_add_interface, .remove_interface = wbsoft_remove_interface, .config = wbsoft_config, .config_interface = wbsoft_config_interface, .configure_filter = wbsoft_configure_filter, - .get_stats = wbsoft_nop, - .get_tx_stats = wbsoft_nop, + .get_stats = wbsoft_get_stats, + .get_tx_stats = wbsoft_get_tx_stats, .get_tsf = wbsoft_get_tsf, // conf_tx: hal_set_cwmin()/hal_set_cwmax; }; @@ -187,21 +186,6 @@ struct wbsoft_priv { }; -int __init wb35_init(void) -{ - printk("[w35und]driver init\n"); - return usb_register(&wb35_driver); -} - -void __exit wb35_exit(void) -{ - printk("[w35und]driver exit\n"); - usb_deregister( &wb35_driver ); -} - -module_init(wb35_init); -module_exit(wb35_exit); - // Usb kernel subsystem will call this function when a new device is plugged into. int wb35_probe(struct usb_interface *intf, const struct usb_device_id *id_table) { @@ -210,7 +194,7 @@ int wb35_probe(struct usb_interface *intf, const struct usb_device_id *id_table) PWBUSB pWbUsb; struct usb_host_interface *interface; struct usb_endpoint_descriptor *endpoint; - int i, ret = -1; + int ret = -1; u32 ltmp; struct usb_device *udev = interface_to_usbdev(intf); @@ -218,114 +202,95 @@ int wb35_probe(struct usb_interface *intf, const struct usb_device_id *id_table) printk("[w35und]wb35_probe ->\n"); - do { - for (i=0; i<(sizeof(Id_Table)/sizeof(struct usb_device_id)); i++ ) { - if ((udev->descriptor.idVendor == Id_Table[i].idVendor) && - (udev->descriptor.idProduct == Id_Table[i].idProduct)) { - printk("[w35und]Found supported hardware\n"); - break; - } - } - if ((i == (sizeof(Id_Table)/sizeof(struct usb_device_id)))) { - #ifdef _PE_USB_INI_DUMP_ - WBDEBUG(("[w35und] This is not the one we are interested about\n")); - #endif - return -ENODEV; - } - - // 20060630.2 Check the device if it already be opened - ret = usb_control_msg(udev, usb_rcvctrlpipe( udev, 0 ), - 0x01, USB_TYPE_VENDOR|USB_RECIP_DEVICE|USB_DIR_IN, - 0x0, 0x400, <mp, 4, HZ*100 ); - if( ret < 0 ) - break; + // 20060630.2 Check the device if it already be opened + ret = usb_control_msg(udev, usb_rcvctrlpipe( udev, 0 ), + 0x01, USB_TYPE_VENDOR|USB_RECIP_DEVICE|USB_DIR_IN, + 0x0, 0x400, <mp, 4, HZ*100 ); + if (ret < 0) + goto error; - ltmp = cpu_to_le32(ltmp); - if (ltmp) // Is already initialized? - break; + ltmp = cpu_to_le32(ltmp); + if (ltmp) // Is already initialized? + goto error; + Adapter = kzalloc(sizeof(ADAPTER), GFP_KERNEL); - Adapter = kzalloc(sizeof(ADAPTER), GFP_KERNEL); + my_adapter = Adapter; + pWbLinux = &Adapter->WbLinux; + pWbUsb = &Adapter->sHwData.WbUsb; + pWbUsb->udev = udev; - my_adapter = Adapter; - pWbLinux = &Adapter->WbLinux; - pWbUsb = &Adapter->sHwData.WbUsb; - pWbUsb->udev = udev; + interface = intf->cur_altsetting; + endpoint = &interface->endpoint[0].desc; - interface = intf->cur_altsetting; - endpoint = &interface->endpoint[0].desc; - - if (endpoint[2].wMaxPacketSize == 512) { - printk("[w35und] Working on USB 2.0\n"); - pWbUsb->IsUsb20 = 1; - } - - if (!WbWLanInitialize(Adapter)) { - printk("[w35und]WbWLanInitialize fail\n"); - break; - } + if (endpoint[2].wMaxPacketSize == 512) { + printk("[w35und] Working on USB 2.0\n"); + pWbUsb->IsUsb20 = 1; + } - { - struct wbsoft_priv *priv; - struct ieee80211_hw *dev; - int res; + if (!WbWLanInitialize(Adapter)) { + printk("[w35und]WbWLanInitialize fail\n"); + goto error; + } - dev = ieee80211_alloc_hw(sizeof(*priv), &wbsoft_ops); + { + struct wbsoft_priv *priv; + struct ieee80211_hw *dev; + static struct ieee80211_supported_band band; + int res; - if (!dev) { - printk("w35und: ieee80211 alloc failed\n" ); - BUG(); - } + dev = ieee80211_alloc_hw(sizeof(*priv), &wbsoft_ops); - my_dev = dev; + if (!dev) { + printk("w35und: ieee80211 alloc failed\n" ); + BUG(); + } - SET_IEEE80211_DEV(dev, &udev->dev); - { - phw_data_t pHwData = &Adapter->sHwData; - unsigned char dev_addr[MAX_ADDR_LEN]; - hal_get_permanent_address(pHwData, dev_addr); - SET_IEEE80211_PERM_ADDR(dev, dev_addr); - } + my_dev = dev; + SET_IEEE80211_DEV(dev, &udev->dev); + { + phw_data_t pHwData = &Adapter->sHwData; + unsigned char dev_addr[MAX_ADDR_LEN]; + hal_get_permanent_address(pHwData, dev_addr); + SET_IEEE80211_PERM_ADDR(dev, dev_addr); + } - dev->extra_tx_headroom = 12; /* FIXME */ - dev->flags = 0; - dev->channel_change_time = 1000; -// dev->max_rssi = 100; + dev->extra_tx_headroom = 12; /* FIXME */ + dev->flags = 0; - dev->queues = 1; + dev->channel_change_time = 1000; +// dev->max_rssi = 100; - static struct ieee80211_supported_band band; + dev->queues = 1; - band.channels = wbsoft_channels; - band.n_channels = ARRAY_SIZE(wbsoft_channels); - band.bitrates = wbsoft_rates; - band.n_bitrates = ARRAY_SIZE(wbsoft_rates); + band.channels = wbsoft_channels; + band.n_channels = ARRAY_SIZE(wbsoft_channels); + band.bitrates = wbsoft_rates; + band.n_bitrates = ARRAY_SIZE(wbsoft_rates); - dev->wiphy->bands[IEEE80211_BAND_2GHZ] = &band; + dev->wiphy->bands[IEEE80211_BAND_2GHZ] = &band; #if 0 - wbsoft_modes[0].num_channels = 1; - wbsoft_modes[0].channels = wbsoft_channels; - wbsoft_modes[0].mode = MODE_IEEE80211B; - wbsoft_modes[0].num_rates = ARRAY_SIZE(wbsoft_rates); - wbsoft_modes[0].rates = wbsoft_rates; - - res = ieee80211_register_hwmode(dev, &wbsoft_modes[0]); - BUG_ON(res); + wbsoft_modes[0].num_channels = 1; + wbsoft_modes[0].channels = wbsoft_channels; + wbsoft_modes[0].mode = MODE_IEEE80211B; + wbsoft_modes[0].num_rates = ARRAY_SIZE(wbsoft_rates); + wbsoft_modes[0].rates = wbsoft_rates; + + res = ieee80211_register_hwmode(dev, &wbsoft_modes[0]); + BUG_ON(res); #endif - res = ieee80211_register_hw(dev); - BUG_ON(res); - } - - usb_set_intfdata( intf, Adapter ); - - printk("[w35und] _probe OK\n"); - return 0; + res = ieee80211_register_hw(dev); + BUG_ON(res); + } - } while(FALSE); + usb_set_intfdata( intf, Adapter ); + printk("[w35und] _probe OK\n"); + return 0; +error: return -ENOMEM; } @@ -401,4 +366,22 @@ void wb35_disconnect(struct usb_interface *intf) } +static struct usb_driver wb35_driver = { + .name = "w35und", + .id_table = wb35_table, + .probe = wb35_probe, + .disconnect = wb35_disconnect, +}; +static int __init wb35_init(void) +{ + return usb_register(&wb35_driver); +} + +static void __exit wb35_exit(void) +{ + usb_deregister(&wb35_driver); +} + +module_init(wb35_init); +module_exit(wb35_exit); diff --git a/drivers/staging/winbond/mds.c b/drivers/staging/winbond/mds.c index 8ce6389c4135..f1de813f9c76 100644 --- a/drivers/staging/winbond/mds.c +++ b/drivers/staging/winbond/mds.c @@ -40,7 +40,7 @@ Mds_Tx(PADAPTER Adapter) PMDS pMds = &Adapter->Mds; DESCRIPTOR TxDes; PDESCRIPTOR pTxDes = &TxDes; - PUCHAR XmitBufAddress; + u8 *XmitBufAddress; u16 XmitBufSize, PacketSize, stmp, CurrentSize, FragmentThreshold; u8 FillIndex, TxDesIndex, FragmentCount, FillCount; unsigned char BufferFilled = FALSE, MICAdd = 0; @@ -90,7 +90,7 @@ Mds_Tx(PADAPTER Adapter) BufferFilled = TRUE; /* Leaves first u8 intact */ - memset((PUCHAR)pTxDes + 1, 0, sizeof(DESCRIPTOR) - 1); + memset((u8 *)pTxDes + 1, 0, sizeof(DESCRIPTOR) - 1); TxDesIndex = pMds->TxDesIndex;//Get the current ID pTxDes->Descriptor_ID = TxDesIndex; @@ -229,10 +229,10 @@ Mds_SendComplete(PADAPTER Adapter, PT02_DESCRIPTOR pT02) } void -Mds_HeaderCopy(PADAPTER Adapter, PDESCRIPTOR pDes, PUCHAR TargetBuffer) +Mds_HeaderCopy(PADAPTER Adapter, PDESCRIPTOR pDes, u8 *TargetBuffer) { PMDS pMds = &Adapter->Mds; - PUCHAR src_buffer = pDes->buffer_address[0];//931130.5.g + u8 *src_buffer = pDes->buffer_address[0];//931130.5.g PT00_DESCRIPTOR pT00; PT01_DESCRIPTOR pT01; u16 stmp; @@ -276,7 +276,7 @@ Mds_HeaderCopy(PADAPTER Adapter, PDESCRIPTOR pDes, PUCHAR TargetBuffer) // // Set tx rate // - stmp = *(PUSHORT)(TargetBuffer+30); // 2n alignment address + stmp = *(u16 *)(TargetBuffer+30); // 2n alignment address //Use basic rate ctmp1 = ctmpf = CURRENT_TX_RATE_FOR_MNG; @@ -326,11 +326,13 @@ Mds_HeaderCopy(PADAPTER Adapter, PDESCRIPTOR pDes, PUCHAR TargetBuffer) // The function return the 4n size of usb pk u16 -Mds_BodyCopy(PADAPTER Adapter, PDESCRIPTOR pDes, PUCHAR TargetBuffer) +Mds_BodyCopy(PADAPTER Adapter, PDESCRIPTOR pDes, u8 *TargetBuffer) { PT00_DESCRIPTOR pT00; PMDS pMds = &Adapter->Mds; - PUCHAR buffer, src_buffer, pctmp; + u8 *buffer; + u8 *src_buffer; + u8 *pctmp; u16 Size = 0; u16 SizeLeft, CopySize, CopyLeft, stmp; u8 buf_index, FragmentCount = 0; @@ -354,7 +356,7 @@ Mds_BodyCopy(PADAPTER Adapter, PDESCRIPTOR pDes, PUCHAR TargetBuffer) SizeLeft -= CopySize; // 1 Byte operation - pctmp = (PUCHAR)( buffer + 8 + DOT_11_SEQUENCE_OFFSET ); + pctmp = (u8 *)( buffer + 8 + DOT_11_SEQUENCE_OFFSET ); *pctmp &= 0xf0; *pctmp |= FragmentCount;//931130.5.m if( !FragmentCount ) @@ -379,7 +381,7 @@ Mds_BodyCopy(PADAPTER Adapter, PDESCRIPTOR pDes, PUCHAR TargetBuffer) buf_index++; buf_index %= MAX_DESCRIPTOR_BUFFER_INDEX; } else { - PUCHAR pctmp = pDes->buffer_address[buf_index]; + u8 *pctmp = pDes->buffer_address[buf_index]; pctmp += CopySize; pDes->buffer_address[buf_index] = pctmp; pDes->buffer_size[buf_index] -= CopySize; @@ -419,7 +421,7 @@ Mds_BodyCopy(PADAPTER Adapter, PDESCRIPTOR pDes, PUCHAR TargetBuffer) pT00->T00_last_mpdu = 1; pT00->T00_IsLastMpdu = 1; - buffer = (PUCHAR)pT00 + 8; // +8 for USB hdr + buffer = (u8 *)pT00 + 8; // +8 for USB hdr buffer[1] &= ~0x04; // Clear more frag bit of 802.11 frame control pDes->FragmentCount = FragmentCount; // Update the correct fragment number return Size; @@ -427,7 +429,7 @@ Mds_BodyCopy(PADAPTER Adapter, PDESCRIPTOR pDes, PUCHAR TargetBuffer) void -Mds_DurationSet( PADAPTER Adapter, PDESCRIPTOR pDes, PUCHAR buffer ) +Mds_DurationSet( PADAPTER Adapter, PDESCRIPTOR pDes, u8 *buffer ) { PT00_DESCRIPTOR pT00; PT01_DESCRIPTOR pT01; @@ -435,7 +437,7 @@ Mds_DurationSet( PADAPTER Adapter, PDESCRIPTOR pDes, PUCHAR buffer ) u8 Rate, i; unsigned char CTS_on = FALSE, RTS_on = FALSE; PT00_DESCRIPTOR pNextT00; - u16 BodyLen; + u16 BodyLen = 0; unsigned char boGroupAddr = FALSE; @@ -574,7 +576,7 @@ Mds_DurationSet( PADAPTER Adapter, PDESCRIPTOR pDes, PUCHAR buffer ) DEFAULT_SIFSTIME*3 ); } - ((PUSHORT)buffer)[5] = cpu_to_le16(Duration);// 4 USHOR for skip 8B USB, 2USHORT=FC + Duration + ((u16 *)buffer)[5] = cpu_to_le16(Duration);// 4 USHOR for skip 8B USB, 2USHORT=FC + Duration //----20061009 add by anson's endian pNextT00->value = cpu_to_le32(pNextT00->value); @@ -615,7 +617,7 @@ Mds_DurationSet( PADAPTER Adapter, PDESCRIPTOR pDes, PUCHAR buffer ) } } - ((PUSHORT)buffer)[5] = cpu_to_le16(Duration);// 4 USHOR for skip 8B USB, 2USHORT=FC + Duration + ((u16 *)buffer)[5] = cpu_to_le16(Duration);// 4 USHOR for skip 8B USB, 2USHORT=FC + Duration pT00->value = cpu_to_le32(pT00->value); pT01->value = cpu_to_le32(pT01->value); //--end 20061009 add diff --git a/drivers/staging/winbond/mds_f.h b/drivers/staging/winbond/mds_f.h index 651188be1065..7a682d4cfbdc 100644 --- a/drivers/staging/winbond/mds_f.h +++ b/drivers/staging/winbond/mds_f.h @@ -1,9 +1,9 @@ unsigned char Mds_initial( PADAPTER Adapter ); void Mds_Destroy( PADAPTER Adapter ); void Mds_Tx( PADAPTER Adapter ); -void Mds_HeaderCopy( PADAPTER Adapter, PDESCRIPTOR pDes, PUCHAR TargetBuffer ); -u16 Mds_BodyCopy( PADAPTER Adapter, PDESCRIPTOR pDes, PUCHAR TargetBuffer ); -void Mds_DurationSet( PADAPTER Adapter, PDESCRIPTOR pDes, PUCHAR TargetBuffer ); +void Mds_HeaderCopy( PADAPTER Adapter, PDESCRIPTOR pDes, u8 *TargetBuffer ); +u16 Mds_BodyCopy( PADAPTER Adapter, PDESCRIPTOR pDes, u8 *TargetBuffer ); +void Mds_DurationSet( PADAPTER Adapter, PDESCRIPTOR pDes, u8 *TargetBuffer ); void Mds_SendComplete( PADAPTER Adapter, PT02_DESCRIPTOR pT02 ); void Mds_MpduProcess( PADAPTER Adapter, PDESCRIPTOR pRxDes ); void Mds_reset_descriptor( PADAPTER Adapter ); diff --git a/drivers/staging/winbond/mds_s.h b/drivers/staging/winbond/mds_s.h index 4738279d5f39..9df2e0936bf8 100644 --- a/drivers/staging/winbond/mds_s.h +++ b/drivers/staging/winbond/mds_s.h @@ -86,7 +86,7 @@ typedef struct _MDS { // For Tx usage u8 TxOwner[ ((MAX_USB_TX_BUFFER_NUMBER + 3) & ~0x03) ]; - PUCHAR pTxBuffer; + u8 *pTxBuffer; u16 TxBufferSize[ ((MAX_USB_TX_BUFFER_NUMBER + 1) & ~0x01) ]; u8 TxDesFrom[ ((MAX_USB_TX_DESCRIPTOR + 3) & ~0x03) ];//931130.4.u // 1: MLME 2: NDIS control 3: NDIS data u8 TxCountInBuffer[ ((MAX_USB_TX_DESCRIPTOR + 3) & ~0x03) ]; // 20060928 @@ -103,7 +103,7 @@ typedef struct _MDS u16 TxResult[ ((MAX_USB_TX_DESCRIPTOR + 1) & ~0x01) ];//Collect the sending result of Mpdu u8 MicRedundant[8]; // For tmp use - PUCHAR MicWriteAddress[2]; //The start address to fill the Mic, use 2 point due to Mic maybe fragment + u8 *MicWriteAddress[2]; //The start address to fill the Mic, use 2 point due to Mic maybe fragment u16 MicWriteSize[2]; //931130.4.x @@ -144,7 +144,7 @@ typedef struct _MDS typedef struct _RxBuffer { - PUCHAR pBufferAddress; // Pointer the received data buffer. + u8 * pBufferAddress; // Pointer the received data buffer. u16 BufferSize; u8 RESERVED; u8 BufferIndex;// Only 1 byte @@ -176,7 +176,7 @@ typedef struct _RXLAYER1 ///////////////////////////////////////////////////////////////////////////////////////////// // For brand-new Rx system u8 ReservedBuffer[ 2400 ];//If Buffer ID is reserved one, it must copy the data into this area - PUCHAR ReservedBufferPoint;// Point to the next availabe address of reserved buffer + u8 *ReservedBufferPoint;// Point to the next availabe address of reserved buffer }RXLAYER1, * PRXLAYER1; diff --git a/drivers/staging/winbond/mlme_s.h b/drivers/staging/winbond/mlme_s.h index 58094f61c032..039fd408ba62 100644 --- a/drivers/staging/winbond/mlme_s.h +++ b/drivers/staging/winbond/mlme_s.h @@ -125,12 +125,12 @@ typedef struct _MLME_FRAME { //NDIS_PACKET MLME_Packet; - PCHAR pMMPDU; + s8 * pMMPDU; u16 len; u8 DataType; u8 IsInUsed; - OS_SPIN_LOCK MLMESpinLock; + spinlock_t MLMESpinLock; u8 TxMMPDU[MAX_NUM_TX_MMPDU][MAX_MMPDU_SIZE]; u8 TxMMPDUInUse[ (MAX_NUM_TX_MMPDU+3) & ~0x03 ]; diff --git a/drivers/staging/winbond/mlmetxrx.c b/drivers/staging/winbond/mlmetxrx.c index 46b091e96794..e8533b8d1976 100644 --- a/drivers/staging/winbond/mlmetxrx.c +++ b/drivers/staging/winbond/mlmetxrx.c @@ -113,13 +113,13 @@ MLME_GetNextPacket(PADAPTER Adapter, PDESCRIPTOR pDes) pDes->Type = Adapter->sMlmeFrame.DataType; } -void MLMEfreeMMPDUBuffer(PWB32_ADAPTER Adapter, PCHAR pData) +void MLMEfreeMMPDUBuffer(PWB32_ADAPTER Adapter, s8 *pData) { int i; // Reclaim the data buffer for (i = 0; i < MAX_NUM_TX_MMPDU; i++) { - if (pData == (PCHAR)&(Adapter->sMlmeFrame.TxMMPDU[i])) + if (pData == (s8 *)&(Adapter->sMlmeFrame.TxMMPDU[i])) break; } if (Adapter->sMlmeFrame.TxMMPDUInUse[i]) diff --git a/drivers/staging/winbond/mlmetxrx_f.h b/drivers/staging/winbond/mlmetxrx_f.h index d74e225be215..24cd5f308d9f 100644 --- a/drivers/staging/winbond/mlmetxrx_f.h +++ b/drivers/staging/winbond/mlmetxrx_f.h @@ -20,7 +20,7 @@ MLMEGetMMPDUBuffer( PWB32_ADAPTER Adapter ); -void MLMEfreeMMPDUBuffer( PWB32_ADAPTER Adapter, PCHAR pData); +void MLMEfreeMMPDUBuffer( PWB32_ADAPTER Adapter, s8 * pData); void MLME_GetNextPacket( PADAPTER Adapter, PDESCRIPTOR pDes ); u8 MLMESendFrame( PWB32_ADAPTER Adapter, @@ -42,7 +42,7 @@ MLMERcvFrame( void MLMEReturnPacket( PWB32_ADAPTER Adapter, - PUCHAR pRxBufer + u8 * pRxBufer ); #ifdef _IBSS_BEACON_SEQ_STICK_ s8 SendBCNullData(PWB32_ADAPTER Adapter, u16 wIdx); diff --git a/drivers/staging/winbond/reg.c b/drivers/staging/winbond/reg.c index b475c7a7c424..57af5b831509 100644 --- a/drivers/staging/winbond/reg.c +++ b/drivers/staging/winbond/reg.c @@ -922,16 +922,16 @@ Uxx_ReadEthernetAddress( phw_data_t pHwData ) // Only unplug and plug again can make hardware read EEPROM again. 20060727 Wb35Reg_WriteSync( pHwData, 0x03b4, 0x08000000 ); // Start EEPROM access + Read + address(0x0d) Wb35Reg_ReadSync( pHwData, 0x03b4, <mp ); - *(PUSHORT)pHwData->PermanentMacAddress = cpu_to_le16((u16)ltmp); //20060926 anson's endian + *(u16 *)pHwData->PermanentMacAddress = cpu_to_le16((u16)ltmp); //20060926 anson's endian Wb35Reg_WriteSync( pHwData, 0x03b4, 0x08010000 ); // Start EEPROM access + Read + address(0x0d) Wb35Reg_ReadSync( pHwData, 0x03b4, <mp ); - *(PUSHORT)(pHwData->PermanentMacAddress + 2) = cpu_to_le16((u16)ltmp); //20060926 anson's endian + *(u16 *)(pHwData->PermanentMacAddress + 2) = cpu_to_le16((u16)ltmp); //20060926 anson's endian Wb35Reg_WriteSync( pHwData, 0x03b4, 0x08020000 ); // Start EEPROM access + Read + address(0x0d) Wb35Reg_ReadSync( pHwData, 0x03b4, <mp ); - *(PUSHORT)(pHwData->PermanentMacAddress + 4) = cpu_to_le16((u16)ltmp); //20060926 anson's endian - *(PUSHORT)(pHwData->PermanentMacAddress + 6) = 0; - Wb35Reg_WriteSync( pHwData, 0x03e8, cpu_to_le32(*(PULONG)pHwData->PermanentMacAddress) ); //20060926 anson's endian - Wb35Reg_WriteSync( pHwData, 0x03ec, cpu_to_le32(*(PULONG)(pHwData->PermanentMacAddress+4)) ); //20060926 anson's endian + *(u16 *)(pHwData->PermanentMacAddress + 4) = cpu_to_le16((u16)ltmp); //20060926 anson's endian + *(u16 *)(pHwData->PermanentMacAddress + 6) = 0; + Wb35Reg_WriteSync( pHwData, 0x03e8, cpu_to_le32(*(u32 *)pHwData->PermanentMacAddress) ); //20060926 anson's endian + Wb35Reg_WriteSync( pHwData, 0x03ec, cpu_to_le32(*(u32 *)(pHwData->PermanentMacAddress+4)) ); //20060926 anson's endian } @@ -1038,7 +1038,7 @@ void RFSynthesizer_initial(phw_data_t pHwData) { u32 altmp[32]; - PULONG pltmp = altmp; + u32 * pltmp = altmp; u32 ltmp; u8 number=0x00; // The number of register vale u8 i; @@ -2358,11 +2358,11 @@ void Mxx_initial( phw_data_t pHwData ) pltmp[2] = pWb35Reg->M2C_MacControl; // M30 BSSID - pltmp[3] = *(PULONG)pHwData->bssid; + pltmp[3] = *(u32 *)pHwData->bssid; // M34 pHwData->AID = DEFAULT_AID; - tmp = *(PUSHORT)(pHwData->bssid+4); + tmp = *(u16 *)(pHwData->bssid+4); tmp |= DEFAULT_AID << 16; pltmp[4] = tmp; @@ -2428,7 +2428,7 @@ void GetTxVgaFromEEPROM( phw_data_t pHwData ) { u32 i, j, ltmp; u16 Value[MAX_TXVGA_EEPROM]; - PUCHAR pctmp; + u8 *pctmp; u8 ctmp=0; // Get the entire TxVga setting in EEPROM @@ -2441,7 +2441,7 @@ void GetTxVgaFromEEPROM( phw_data_t pHwData ) } // Adjust the filed which fills with reserved value. - pctmp = (PUCHAR)Value; + pctmp = (u8 *)Value; for( i=0; i<(MAX_TXVGA_EEPROM*2); i++ ) { if( pctmp[i] != 0xff ) @@ -2480,7 +2480,7 @@ void GetTxVgaFromEEPROM( phw_data_t pHwData ) // This function will use default TxVgaSettingInEEPROM data to calculate new TxVga. void EEPROMTxVgaAdjust( phw_data_t pHwData ) // 20060619.5 Add { - PUCHAR pTxVga = pHwData->TxVgaSettingInEEPROM; + u8 * pTxVga = pHwData->TxVgaSettingInEEPROM; s16 i, stmp; //-- 2.4G -- 20060704.2 Request from Tiger diff --git a/drivers/staging/winbond/sme_api.c b/drivers/staging/winbond/sme_api.c index 40e93b7600eb..31c9673ea865 100644 --- a/drivers/staging/winbond/sme_api.c +++ b/drivers/staging/winbond/sme_api.c @@ -10,4 +10,5 @@ s8 sme_get_rssi(void *pcore_data, s32 *prssi) { BUG(); + return 0; } diff --git a/drivers/staging/winbond/sme_api.h b/drivers/staging/winbond/sme_api.h index 016b225ca4a4..745eb376bc70 100644 --- a/drivers/staging/winbond/sme_api.h +++ b/drivers/staging/winbond/sme_api.h @@ -208,7 +208,7 @@ s8 sme_set_tx_antenna(void *pcore_data, u32 TxAntenna); s8 sme_set_IBSS_chan(void *pcore_data, ChanInfo chan); //20061108 WPS -s8 sme_set_IE_append(void *pcore_data, PUCHAR buffer, u16 buf_len); +s8 sme_set_IE_append(void *pcore_data, u8 *buffer, u16 buf_len); diff --git a/drivers/staging/winbond/wbhal.c b/drivers/staging/winbond/wbhal.c index daf442247558..5d68ecec34c7 100644 --- a/drivers/staging/winbond/wbhal.c +++ b/drivers/staging/winbond/wbhal.c @@ -1,13 +1,13 @@ #include "os_common.h" -void hal_get_ethernet_address( phw_data_t pHwData, PUCHAR current_address ) +void hal_get_ethernet_address( phw_data_t pHwData, u8 *current_address ) { if( pHwData->SurpriseRemove ) return; memcpy( current_address, pHwData->CurrentMacAddress, ETH_LENGTH_OF_ADDRESS ); } -void hal_set_ethernet_address( phw_data_t pHwData, PUCHAR current_address ) +void hal_set_ethernet_address( phw_data_t pHwData, u8 *current_address ) { u32 ltmp[2]; @@ -15,13 +15,13 @@ void hal_set_ethernet_address( phw_data_t pHwData, PUCHAR current_address ) memcpy( pHwData->CurrentMacAddress, current_address, ETH_LENGTH_OF_ADDRESS ); - ltmp[0]= cpu_to_le32( *(PULONG)pHwData->CurrentMacAddress ); - ltmp[1]= cpu_to_le32( *(PULONG)(pHwData->CurrentMacAddress + 4) ) & 0xffff; + ltmp[0]= cpu_to_le32( *(u32 *)pHwData->CurrentMacAddress ); + ltmp[1]= cpu_to_le32( *(u32 *)(pHwData->CurrentMacAddress + 4) ) & 0xffff; Wb35Reg_BurstWrite( pHwData, 0x03e8, ltmp, 2, AUTO_INCREMENT ); } -void hal_get_permanent_address( phw_data_t pHwData, PUCHAR pethernet_address ) +void hal_get_permanent_address( phw_data_t pHwData, u8 *pethernet_address ) { if( pHwData->SurpriseRemove ) return; @@ -89,7 +89,7 @@ void hal_halt(phw_data_t pHwData, void *ppa_data) } //--------------------------------------------------------------------------------------------------- -void hal_set_rates(phw_data_t pHwData, PUCHAR pbss_rates, +void hal_set_rates(phw_data_t pHwData, u8 *pbss_rates, u8 length, unsigned char basic_rate_set) { PWB35REG pWb35Reg = &pHwData->Wb35Reg; @@ -158,13 +158,13 @@ void hal_set_rates(phw_data_t pHwData, PUCHAR pbss_rates, // Fill data into support rate until buffer full //---20060926 add by anson's endian for (i=0; i<4; i++) - *(PULONG)(SupportedRate+(i<<2)) = cpu_to_le32( *(PULONG)(SupportedRate+(i<<2)) ); + *(u32 *)(SupportedRate+(i<<2)) = cpu_to_le32( *(u32 *)(SupportedRate+(i<<2)) ); //--- end 20060926 add by anson's endian - Wb35Reg_BurstWrite( pHwData,0x087c, (PULONG)SupportedRate, 4, AUTO_INCREMENT ); - pWb35Reg->M7C_MacControl = ((PULONG)SupportedRate)[0]; - pWb35Reg->M80_MacControl = ((PULONG)SupportedRate)[1]; - pWb35Reg->M84_MacControl = ((PULONG)SupportedRate)[2]; - pWb35Reg->M88_MacControl = ((PULONG)SupportedRate)[3]; + Wb35Reg_BurstWrite( pHwData,0x087c, (u32 *)SupportedRate, 4, AUTO_INCREMENT ); + pWb35Reg->M7C_MacControl = ((u32 *)SupportedRate)[0]; + pWb35Reg->M80_MacControl = ((u32 *)SupportedRate)[1]; + pWb35Reg->M84_MacControl = ((u32 *)SupportedRate)[2]; + pWb35Reg->M88_MacControl = ((u32 *)SupportedRate)[3]; // Fill length tmp = Count1<<28 | Count2<<24; @@ -206,7 +206,7 @@ void hal_set_current_channel_ex( phw_data_t pHwData, ChanInfo channel ) pWb35Reg->M28_MacControl &= ~0xff; // Clean channel information field pWb35Reg->M28_MacControl |= channel.ChanNo; Wb35Reg_WriteWithCallbackValue( pHwData, 0x0828, pWb35Reg->M28_MacControl, - (PCHAR)&channel, sizeof(ChanInfo)); + (s8 *)&channel, sizeof(ChanInfo)); } //--------------------------------------------------------------------------------------------------- void hal_set_current_channel( phw_data_t pHwData, ChanInfo channel ) @@ -277,7 +277,7 @@ void hal_set_accept_beacon( phw_data_t pHwData, u8 enable ) Wb35Reg_Write( pHwData, 0x0800, pWb35Reg->M00_MacControl ); } //--------------------------------------------------------------------------------------------------- -void hal_set_multicast_address( phw_data_t pHwData, PUCHAR address, u8 number ) +void hal_set_multicast_address( phw_data_t pHwData, u8 *address, u8 number ) { PWB35REG pWb35Reg = &pHwData->Wb35Reg; u8 Byte, Bit; @@ -297,7 +297,7 @@ void hal_set_multicast_address( phw_data_t pHwData, PUCHAR address, u8 number ) } // Updating register - Wb35Reg_BurstWrite( pHwData, 0x0804, (PULONG)pWb35Reg->Multicast, 2, AUTO_INCREMENT ); + Wb35Reg_BurstWrite( pHwData, 0x0804, (u32 *)pWb35Reg->Multicast, 2, AUTO_INCREMENT ); } //--------------------------------------------------------------------------------------------------- u8 hal_get_accept_beacon( phw_data_t pHwData ) @@ -806,7 +806,7 @@ u8 hal_get_hw_radio_off( phw_data_t pHwData ) } } -unsigned char hal_get_dxx_reg( phw_data_t pHwData, u16 number, PULONG pValue ) +unsigned char hal_get_dxx_reg( phw_data_t pHwData, u16 number, u32 * pValue ) { if( number < 0x1000 ) number += 0x1000; diff --git a/drivers/staging/winbond/wbhal_f.h b/drivers/staging/winbond/wbhal_f.h index fe25f97af724..ea9531ac8474 100644 --- a/drivers/staging/winbond/wbhal_f.h +++ b/drivers/staging/winbond/wbhal_f.h @@ -16,23 +16,23 @@ //==================================================================================== // Function declaration //==================================================================================== -void hal_remove_mapping_key( phw_data_t pHwData, PUCHAR pmac_addr ); +void hal_remove_mapping_key( phw_data_t pHwData, u8 *pmac_addr ); void hal_remove_default_key( phw_data_t pHwData, u32 index ); -unsigned char hal_set_mapping_key( phw_data_t Adapter, PUCHAR pmac_addr, u8 null_key, u8 wep_on, PUCHAR ptx_tsc, PUCHAR prx_tsc, u8 key_type, u8 key_len, PUCHAR pkey_data ); -unsigned char hal_set_default_key( phw_data_t Adapter, u8 index, u8 null_key, u8 wep_on, PUCHAR ptx_tsc, PUCHAR prx_tsc, u8 key_type, u8 key_len, PUCHAR pkey_data ); +unsigned char hal_set_mapping_key( phw_data_t Adapter, u8 *pmac_addr, u8 null_key, u8 wep_on, u8 *ptx_tsc, u8 *prx_tsc, u8 key_type, u8 key_len, u8 *pkey_data ); +unsigned char hal_set_default_key( phw_data_t Adapter, u8 index, u8 null_key, u8 wep_on, u8 *ptx_tsc, u8 *prx_tsc, u8 key_type, u8 key_len, u8 *pkey_data ); void hal_clear_all_default_key( phw_data_t pHwData ); void hal_clear_all_group_key( phw_data_t pHwData ); void hal_clear_all_mapping_key( phw_data_t pHwData ); void hal_clear_all_key( phw_data_t pHwData ); -void hal_get_ethernet_address( phw_data_t pHwData, PUCHAR current_address ); -void hal_set_ethernet_address( phw_data_t pHwData, PUCHAR current_address ); -void hal_get_permanent_address( phw_data_t pHwData, PUCHAR pethernet_address ); +void hal_get_ethernet_address( phw_data_t pHwData, u8 *current_address ); +void hal_set_ethernet_address( phw_data_t pHwData, u8 *current_address ); +void hal_get_permanent_address( phw_data_t pHwData, u8 *pethernet_address ); unsigned char hal_init_hardware( phw_data_t pHwData, PADAPTER Adapter ); void hal_set_power_save_mode( phw_data_t pHwData, unsigned char power_save, unsigned char wakeup, unsigned char dtim ); -void hal_get_power_save_mode( phw_data_t pHwData, PBOOLEAN pin_pwr_save ); +void hal_get_power_save_mode( phw_data_t pHwData, u8 *pin_pwr_save ); void hal_set_slot_time( phw_data_t pHwData, u8 type ); #define hal_set_atim_window( _A, _ATM ) -void hal_set_rates( phw_data_t pHwData, PUCHAR pbss_rates, u8 length, unsigned char basic_rate_set ); +void hal_set_rates( phw_data_t pHwData, u8 *pbss_rates, u8 length, unsigned char basic_rate_set ); #define hal_set_basic_rates( _A, _R, _L ) hal_set_rates( _A, _R, _L, TRUE ) #define hal_set_op_rates( _A, _R, _L ) hal_set_rates( _A, _R, _L, FALSE ) void hal_start_bss( phw_data_t pHwData, u8 mac_op_mode ); @@ -40,19 +40,19 @@ void hal_join_request( phw_data_t pHwData, u8 bss_type ); // 0:BSS STA 1:IBSS void hal_stop_sync_bss( phw_data_t pHwData ); void hal_resume_sync_bss( phw_data_t pHwData); void hal_set_aid( phw_data_t pHwData, u16 aid ); -void hal_set_bssid( phw_data_t pHwData, PUCHAR pbssid ); -void hal_get_bssid( phw_data_t pHwData, PUCHAR pbssid ); +void hal_set_bssid( phw_data_t pHwData, u8 *pbssid ); +void hal_get_bssid( phw_data_t pHwData, u8 *pbssid ); void hal_set_beacon_period( phw_data_t pHwData, u16 beacon_period ); void hal_set_listen_interval( phw_data_t pHwData, u16 listen_interval ); void hal_set_cap_info( phw_data_t pHwData, u16 capability_info ); -void hal_set_ssid( phw_data_t pHwData, PUCHAR pssid, u8 ssid_len ); +void hal_set_ssid( phw_data_t pHwData, u8 *pssid, u8 ssid_len ); void hal_set_current_channel( phw_data_t pHwData, ChanInfo channel ); void hal_set_current_channel_ex( phw_data_t pHwData, ChanInfo channel ); void hal_get_current_channel( phw_data_t pHwData, ChanInfo *channel ); void hal_set_accept_broadcast( phw_data_t pHwData, u8 enable ); void hal_set_accept_multicast( phw_data_t pHwData, u8 enable ); void hal_set_accept_beacon( phw_data_t pHwData, u8 enable ); -void hal_set_multicast_address( phw_data_t pHwData, PUCHAR address, u8 number ); +void hal_set_multicast_address( phw_data_t pHwData, u8 *address, u8 number ); u8 hal_get_accept_beacon( phw_data_t pHwData ); void hal_stop( phw_data_t pHwData ); void hal_halt( phw_data_t pHwData, void *ppa_data ); @@ -97,7 +97,7 @@ void hal_surprise_remove( phw_data_t pHwData ); void hal_rate_change( phw_data_t pHwData ); // Notify the HAL rate is changing 20060613.1 -unsigned char hal_get_dxx_reg( phw_data_t pHwData, u16 number, PULONG pValue ); +unsigned char hal_get_dxx_reg( phw_data_t pHwData, u16 number, u32 * pValue ); unsigned char hal_set_dxx_reg( phw_data_t pHwData, u16 number, u32 value ); #define hal_get_time_count( _P ) (_P->time_count/10) // return 100ms count #define hal_detect_error( _P ) (_P->WbUsb.DetectCount) @@ -116,7 +116,7 @@ unsigned char hal_idle( phw_data_t pHwData ); #define pa_stall_execution( _A ) //OS_SLEEP( 1 ) #define hw_get_cxx_reg( _A, _B, _C ) #define hw_set_cxx_reg( _A, _B, _C ) -#define hw_get_dxx_reg( _A, _B, _C ) hal_get_dxx_reg( _A, _B, (PULONG)_C ) +#define hw_get_dxx_reg( _A, _B, _C ) hal_get_dxx_reg( _A, _B, (u32 *)_C ) #define hw_set_dxx_reg( _A, _B, _C ) hal_set_dxx_reg( _A, _B, (u32)_C ) diff --git a/drivers/staging/winbond/wbhal_s.h b/drivers/staging/winbond/wbhal_s.h index 5b862ff357bd..2ee3f0fc1ad8 100644 --- a/drivers/staging/winbond/wbhal_s.h +++ b/drivers/staging/winbond/wbhal_s.h @@ -461,7 +461,7 @@ typedef struct _HW_DATA_T //===================================================================== // Definition for 802.11 //===================================================================== - PUCHAR bssid_pointer; // Used by hal_get_bssid for return value + u8 *bssid_pointer; // Used by hal_get_bssid for return value u8 bssid[8];// Only 6 byte will be used. 8 byte is required for read buffer u8 ssid[32];// maximum ssid length is 32 byte @@ -486,7 +486,7 @@ typedef struct _HW_DATA_T u32 CurrentRadioSw; // 20060320.2 0:On 1:Off u32 CurrentRadioHw; // 20060825 0:On 1:Off - PUCHAR power_save_point; // Used by hal_get_power_save_mode for return value + u8 *power_save_point; // Used by hal_get_power_save_mode for return value u8 cwmin; u8 desired_power_save; u8 dtim;// Is running dtim diff --git a/drivers/staging/winbond/wblinux.c b/drivers/staging/winbond/wblinux.c index 2eade5a47b19..4ed45e488318 100644 --- a/drivers/staging/winbond/wblinux.c +++ b/drivers/staging/winbond/wblinux.c @@ -25,11 +25,11 @@ EncapAtomicInc(PADAPTER Adapter, void* pAtomic) { PWBLINUX pWbLinux = &Adapter->WbLinux; u32 ltmp; - PULONG pltmp = (PULONG)pAtomic; - OS_SPIN_LOCK_ACQUIRED( &pWbLinux->AtomicSpinLock ); + u32 * pltmp = (u32 *)pAtomic; + spin_lock_irq( &pWbLinux->AtomicSpinLock ); (*pltmp)++; ltmp = (*pltmp); - OS_SPIN_LOCK_RELEASED( &pWbLinux->AtomicSpinLock ); + spin_unlock_irq( &pWbLinux->AtomicSpinLock ); return ltmp; } @@ -38,11 +38,11 @@ EncapAtomicDec(PADAPTER Adapter, void* pAtomic) { PWBLINUX pWbLinux = &Adapter->WbLinux; u32 ltmp; - PULONG pltmp = (PULONG)pAtomic; - OS_SPIN_LOCK_ACQUIRED( &pWbLinux->AtomicSpinLock ); + u32 * pltmp = (u32 *)pAtomic; + spin_lock_irq( &pWbLinux->AtomicSpinLock ); (*pltmp)--; ltmp = (*pltmp); - OS_SPIN_LOCK_RELEASED( &pWbLinux->AtomicSpinLock ); + spin_unlock_irq( &pWbLinux->AtomicSpinLock ); return ltmp; } @@ -51,8 +51,8 @@ WBLINUX_Initial(PADAPTER Adapter) { PWBLINUX pWbLinux = &Adapter->WbLinux; - OS_SPIN_LOCK_ALLOCATE( &pWbLinux->SpinLock ); - OS_SPIN_LOCK_ALLOCATE( &pWbLinux->AtomicSpinLock ); + spin_lock_init( &pWbLinux->SpinLock ); + spin_lock_init( &pWbLinux->AtomicSpinLock ); return TRUE; } @@ -79,7 +79,6 @@ void WBLINUX_Destroy(PADAPTER Adapter) { WBLINUX_stop( Adapter ); - OS_SPIN_LOCK_FREE( &pWbNdis->SpinLock ); #ifdef _PE_USB_INI_DUMP_ WBDEBUG(("[w35und] unregister_netdev!\n")); #endif @@ -142,119 +141,118 @@ unsigned char WbWLanInitialize(PADAPTER Adapter) { phw_data_t pHwData; - PUCHAR pMacAddr, pMacAddr2; + u8 *pMacAddr; + u8 *pMacAddr2; u32 InitStep = 0; u8 EEPROM_region; u8 HwRadioOff; - do { - // - // Setting default value for Linux - // - Adapter->sLocalPara.region_INF = REGION_AUTO; - Adapter->sLocalPara.TxRateMode = RATE_AUTO; - psLOCAL->bMacOperationMode = MODE_802_11_BG; // B/G mode - Adapter->Mds.TxRTSThreshold = DEFAULT_RTSThreshold; - Adapter->Mds.TxFragmentThreshold = DEFAULT_FRAGMENT_THRESHOLD; - hal_set_phy_type( &Adapter->sHwData, RF_WB_242_1 ); - Adapter->sLocalPara.MTUsize = MAX_ETHERNET_PACKET_SIZE; - psLOCAL->bPreambleMode = AUTO_MODE; - Adapter->sLocalPara.RadioOffStatus.boSwRadioOff = FALSE; - pHwData = &Adapter->sHwData; - hal_set_phy_type( pHwData, RF_DECIDE_BY_INF ); - - // - // Initial each module and variable - // - if (!WBLINUX_Initial(Adapter)) { + // + // Setting default value for Linux + // + Adapter->sLocalPara.region_INF = REGION_AUTO; + Adapter->sLocalPara.TxRateMode = RATE_AUTO; + psLOCAL->bMacOperationMode = MODE_802_11_BG; // B/G mode + Adapter->Mds.TxRTSThreshold = DEFAULT_RTSThreshold; + Adapter->Mds.TxFragmentThreshold = DEFAULT_FRAGMENT_THRESHOLD; + hal_set_phy_type( &Adapter->sHwData, RF_WB_242_1 ); + Adapter->sLocalPara.MTUsize = MAX_ETHERNET_PACKET_SIZE; + psLOCAL->bPreambleMode = AUTO_MODE; + Adapter->sLocalPara.RadioOffStatus.boSwRadioOff = FALSE; + pHwData = &Adapter->sHwData; + hal_set_phy_type( pHwData, RF_DECIDE_BY_INF ); + + // + // Initial each module and variable + // + if (!WBLINUX_Initial(Adapter)) { #ifdef _PE_USB_INI_DUMP_ - WBDEBUG(("[w35und]WBNDIS initialization failed\n")); + WBDEBUG(("[w35und]WBNDIS initialization failed\n")); #endif - break; - } + goto error; + } - // Initial Software variable - Adapter->sLocalPara.ShutDowned = FALSE; - - //added by ws for wep key error detection - Adapter->sLocalPara.bWepKeyError= FALSE; - Adapter->sLocalPara.bToSelfPacketReceived = FALSE; - Adapter->sLocalPara.WepKeyDetectTimerCount= 2 * 100; /// 2 seconds - - // Initial USB hal - InitStep = 1; - pHwData = &Adapter->sHwData; - if (!hal_init_hardware(pHwData, Adapter)) - break; - - EEPROM_region = hal_get_region_from_EEPROM( pHwData ); - if (EEPROM_region != REGION_AUTO) - psLOCAL->region = EEPROM_region; - else { - if (psLOCAL->region_INF != REGION_AUTO) - psLOCAL->region = psLOCAL->region_INF; - else - psLOCAL->region = REGION_USA; //default setting - } + // Initial Software variable + Adapter->sLocalPara.ShutDowned = FALSE; + + //added by ws for wep key error detection + Adapter->sLocalPara.bWepKeyError= FALSE; + Adapter->sLocalPara.bToSelfPacketReceived = FALSE; + Adapter->sLocalPara.WepKeyDetectTimerCount= 2 * 100; /// 2 seconds + + // Initial USB hal + InitStep = 1; + pHwData = &Adapter->sHwData; + if (!hal_init_hardware(pHwData, Adapter)) + goto error; + + EEPROM_region = hal_get_region_from_EEPROM( pHwData ); + if (EEPROM_region != REGION_AUTO) + psLOCAL->region = EEPROM_region; + else { + if (psLOCAL->region_INF != REGION_AUTO) + psLOCAL->region = psLOCAL->region_INF; + else + psLOCAL->region = REGION_USA; //default setting + } - // Get Software setting flag from hal - Adapter->sLocalPara.boAntennaDiversity = FALSE; - if (hal_software_set(pHwData) & 0x00000001) - Adapter->sLocalPara.boAntennaDiversity = TRUE; - - // - // For TS module - // - InitStep = 2; - - // For MDS module - InitStep = 3; - Mds_initial(Adapter); - - //======================================= - // Initialize the SME, SCAN, MLME, ROAM - //======================================= - InitStep = 4; - InitStep = 5; - InitStep = 6; - - // If no user-defined address in the registry, use the addresss "burned" on the NIC instead. - pMacAddr = Adapter->sLocalPara.ThisMacAddress; - pMacAddr2 = Adapter->sLocalPara.PermanentAddress; - hal_get_permanent_address( pHwData, Adapter->sLocalPara.PermanentAddress );// Reading ethernet address from EEPROM - if (OS_MEMORY_COMPARE(pMacAddr, "\x00\x00\x00\x00\x00\x00", MAC_ADDR_LENGTH )) // Is equal - { - memcpy( pMacAddr, pMacAddr2, MAC_ADDR_LENGTH ); - } else { - // Set the user define MAC address - hal_set_ethernet_address( pHwData, Adapter->sLocalPara.ThisMacAddress ); - } + // Get Software setting flag from hal + Adapter->sLocalPara.boAntennaDiversity = FALSE; + if (hal_software_set(pHwData) & 0x00000001) + Adapter->sLocalPara.boAntennaDiversity = TRUE; + + // + // For TS module + // + InitStep = 2; + + // For MDS module + InitStep = 3; + Mds_initial(Adapter); + + //======================================= + // Initialize the SME, SCAN, MLME, ROAM + //======================================= + InitStep = 4; + InitStep = 5; + InitStep = 6; + + // If no user-defined address in the registry, use the addresss "burned" on the NIC instead. + pMacAddr = Adapter->sLocalPara.ThisMacAddress; + pMacAddr2 = Adapter->sLocalPara.PermanentAddress; + hal_get_permanent_address( pHwData, Adapter->sLocalPara.PermanentAddress );// Reading ethernet address from EEPROM + if (OS_MEMORY_COMPARE(pMacAddr, "\x00\x00\x00\x00\x00\x00", MAC_ADDR_LENGTH )) // Is equal + { + memcpy( pMacAddr, pMacAddr2, MAC_ADDR_LENGTH ); + } else { + // Set the user define MAC address + hal_set_ethernet_address( pHwData, Adapter->sLocalPara.ThisMacAddress ); + } - //get current antenna - psLOCAL->bAntennaNo = hal_get_antenna_number(pHwData); + //get current antenna + psLOCAL->bAntennaNo = hal_get_antenna_number(pHwData); #ifdef _PE_STATE_DUMP_ - WBDEBUG(("Driver init, antenna no = %d\n", psLOCAL->bAntennaNo)); + WBDEBUG(("Driver init, antenna no = %d\n", psLOCAL->bAntennaNo)); #endif - hal_get_hw_radio_off( pHwData ); + hal_get_hw_radio_off( pHwData ); - // Waiting for HAL setting OK - while (!hal_idle(pHwData)) - OS_SLEEP(10000); + // Waiting for HAL setting OK + while (!hal_idle(pHwData)) + OS_SLEEP(10000); - MTO_Init(Adapter); + MTO_Init(Adapter); - HwRadioOff = hal_get_hw_radio_off( pHwData ); - psLOCAL->RadioOffStatus.boHwRadioOff = !!HwRadioOff; + HwRadioOff = hal_get_hw_radio_off( pHwData ); + psLOCAL->RadioOffStatus.boHwRadioOff = !!HwRadioOff; - hal_set_radio_mode( pHwData, (unsigned char)(psLOCAL->RadioOffStatus.boSwRadioOff || psLOCAL->RadioOffStatus.boHwRadioOff) ); + hal_set_radio_mode( pHwData, (unsigned char)(psLOCAL->RadioOffStatus.boSwRadioOff || psLOCAL->RadioOffStatus.boHwRadioOff) ); - hal_driver_init_OK(pHwData) = 1; // Notify hal that the driver is ready now. - //set a tx power for reference..... -// sme_set_tx_power_level(Adapter, 12); FIXME? - return TRUE; - } - while(FALSE); + hal_driver_init_OK(pHwData) = 1; // Notify hal that the driver is ready now. + //set a tx power for reference..... +// sme_set_tx_power_level(Adapter, 12); FIXME? + return TRUE; +error: switch (InitStep) { case 5: case 4: diff --git a/drivers/staging/winbond/wblinux_s.h b/drivers/staging/winbond/wblinux_s.h index 97e9167ab839..fd2bb43bf3cf 100644 --- a/drivers/staging/winbond/wblinux_s.h +++ b/drivers/staging/winbond/wblinux_s.h @@ -24,8 +24,8 @@ typedef struct _WBLINUX { - OS_SPIN_LOCK AtomicSpinLock; - OS_SPIN_LOCK SpinLock; + spinlock_t AtomicSpinLock; + spinlock_t SpinLock; u32 shutdown; OS_ATOMIC ThreadCount; diff --git a/drivers/staging/wlan-ng/Kconfig b/drivers/staging/wlan-ng/Kconfig index 10b1f0f634d3..2425d860dcaf 100644 --- a/drivers/staging/wlan-ng/Kconfig +++ b/drivers/staging/wlan-ng/Kconfig @@ -1,6 +1,6 @@ config PRISM2_USB tristate "Prism2.5 USB driver" - depends on USB + depends on WLAN_80211 && USB default n ---help--- This is the wlan-ng prism 2.5 USB driver for a wide range of diff --git a/drivers/staging/wlan-ng/hfa384x.h b/drivers/staging/wlan-ng/hfa384x.h index a2054639d24b..0dfb8ce9aae7 100644 --- a/drivers/staging/wlan-ng/hfa384x.h +++ b/drivers/staging/wlan-ng/hfa384x.h @@ -824,7 +824,7 @@ PD Record codes #define HFA384x_CMD_MACPORT_SET(value) ((UINT16)HFA384x_CMD_AINFO_SET(value)) #define HFA384x_CMD_ISRECL(value) ((UINT16)(HFA384x_CMD_AINFO_GET((UINT16)(value) & HFA384x_CMD_RECL))) #define HFA384x_CMD_RECL_SET(value) ((UINT16)HFA384x_CMD_AINFO_SET(value)) -#define HFA384x_CMD_QOS_GET(value) ((UINT16((((UINT16)(value))&((UINT16)0x3000)) >> 12)) +#define HFA384x_CMD_QOS_GET(value) ((UINT16)((((UINT16)(value))&((UINT16)0x3000)) >> 12)) #define HFA384x_CMD_QOS_SET(value) ((UINT16)((((UINT16)(value)) << 12) & 0x3000)) #define HFA384x_CMD_ISWRITE(value) ((UINT16)(HFA384x_CMD_AINFO_GET((UINT16)(value) & HFA384x_CMD_WRITE))) #define HFA384x_CMD_WRITE_SET(value) ((UINT16)HFA384x_CMD_AINFO_SET((UINT16)value)) diff --git a/drivers/staging/wlan-ng/p80211wep.c b/drivers/staging/wlan-ng/p80211wep.c index 53fe2985971f..11a50c7fbfc8 100644 --- a/drivers/staging/wlan-ng/p80211wep.c +++ b/drivers/staging/wlan-ng/p80211wep.c @@ -64,7 +64,6 @@ /*================================================================*/ /* Project Includes */ -#include "version.h" #include "p80211hdr.h" #include "p80211types.h" #include "p80211msg.h" diff --git a/drivers/staging/wlan-ng/prism2mib.c b/drivers/staging/wlan-ng/prism2mib.c index 268fd9bba1ef..eac06f793d81 100644 --- a/drivers/staging/wlan-ng/prism2mib.c +++ b/drivers/staging/wlan-ng/prism2mib.c @@ -90,8 +90,6 @@ #include <linux/usb.h> //#endif -#include "wlan_compat.h" - /*================================================================*/ /* Project Includes */ diff --git a/drivers/staging/wlan-ng/wlan_compat.h b/drivers/staging/wlan-ng/wlan_compat.h index 17026570708f..59dfa8f84cbe 100644 --- a/drivers/staging/wlan-ng/wlan_compat.h +++ b/drivers/staging/wlan-ng/wlan_compat.h @@ -245,11 +245,11 @@ typedef int64_t INT64; # define preempt_count() (0UL) #endif -#define WLAN_LOG_ERROR(x,args...) printk(KERN_ERR "%s: " x , __FUNCTION__ , ##args); +#define WLAN_LOG_ERROR(x,args...) printk(KERN_ERR "%s: " x , __func__ , ##args); -#define WLAN_LOG_WARNING(x,args...) printk(KERN_WARNING "%s: " x , __FUNCTION__ , ##args); +#define WLAN_LOG_WARNING(x,args...) printk(KERN_WARNING "%s: " x , __func__ , ##args); -#define WLAN_LOG_NOTICE(x,args...) printk(KERN_NOTICE "%s: " x , __FUNCTION__ , ##args); +#define WLAN_LOG_NOTICE(x,args...) printk(KERN_NOTICE "%s: " x , __func__ , ##args); #define WLAN_LOG_INFO(args... ) printk(KERN_INFO args) @@ -265,7 +265,7 @@ typedef int64_t INT64; #define DBFENTER { if ( WLAN_DBVAR >= 5 ){ WLAN_LOG_DEBUG(3,"---->\n"); } } #define DBFEXIT { if ( WLAN_DBVAR >= 5 ){ WLAN_LOG_DEBUG(3,"<----\n"); } } - #define WLAN_LOG_DEBUG(l,x,args...) if ( WLAN_DBVAR >= (l)) printk(KERN_DEBUG "%s(%lu): " x , __FUNCTION__, (preempt_count() & PREEMPT_MASK), ##args ); + #define WLAN_LOG_DEBUG(l,x,args...) if ( WLAN_DBVAR >= (l)) printk(KERN_DEBUG "%s(%lu): " x , __func__, (preempt_count() & PREEMPT_MASK), ##args ); #else #define WLAN_ASSERT(c) #define WLAN_HEX_DUMP( l, s, p, n) diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig index bcefbddeba50..289d81adfb9c 100644 --- a/drivers/usb/Kconfig +++ b/drivers/usb/Kconfig @@ -36,7 +36,8 @@ config USB_ARCH_HAS_OHCI default y if PXA3xx default y if ARCH_EP93XX default y if ARCH_AT91 - default y if ARCH_PNX4008 + default y if ARCH_PNX4008 && I2C + default y if MFD_TC6393XB # PPC: default y if STB03xxx default y if PPC_MPC52xx @@ -97,6 +98,8 @@ source "drivers/usb/core/Kconfig" source "drivers/usb/mon/Kconfig" +source "drivers/usb/wusbcore/Kconfig" + source "drivers/usb/host/Kconfig" source "drivers/usb/musb/Kconfig" diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile index a419c42e880e..8b7c419b876e 100644 --- a/drivers/usb/Makefile +++ b/drivers/usb/Makefile @@ -16,9 +16,12 @@ obj-$(CONFIG_USB_UHCI_HCD) += host/ obj-$(CONFIG_USB_SL811_HCD) += host/ obj-$(CONFIG_USB_U132_HCD) += host/ obj-$(CONFIG_USB_R8A66597_HCD) += host/ +obj-$(CONFIG_USB_HWA_HCD) += host/ obj-$(CONFIG_USB_C67X00_HCD) += c67x00/ +obj-$(CONFIG_USB_WUSB) += wusbcore/ + obj-$(CONFIG_USB_ACM) += class/ obj-$(CONFIG_USB_PRINTER) += class/ diff --git a/drivers/usb/atm/speedtch.c b/drivers/usb/atm/speedtch.c index 76fce44c2f9a..3e862401a638 100644 --- a/drivers/usb/atm/speedtch.c +++ b/drivers/usb/atm/speedtch.c @@ -722,6 +722,16 @@ static void speedtch_atm_stop(struct usbatm_data *usbatm, struct atm_dev *atm_de flush_scheduled_work(); } +static int speedtch_pre_reset(struct usb_interface *intf) +{ + return 0; +} + +static int speedtch_post_reset(struct usb_interface *intf) +{ + return 0; +} + /********** ** USB ** @@ -740,6 +750,8 @@ static struct usb_driver speedtch_usb_driver = { .name = speedtch_driver_name, .probe = speedtch_usb_probe, .disconnect = usbatm_usb_disconnect, + .pre_reset = speedtch_pre_reset, + .post_reset = speedtch_post_reset, .id_table = speedtch_usb_ids }; diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index fab23ee8702b..20104443081a 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -849,9 +849,10 @@ static void acm_write_buffers_free(struct acm *acm) { int i; struct acm_wb *wb; + struct usb_device *usb_dev = interface_to_usbdev(acm->control); for (wb = &acm->wb[0], i = 0; i < ACM_NW; i++, wb++) { - usb_buffer_free(acm->dev, acm->writesize, wb->buf, wb->dmah); + usb_buffer_free(usb_dev, acm->writesize, wb->buf, wb->dmah); } } diff --git a/drivers/usb/class/cdc-wdm.c b/drivers/usb/class/cdc-wdm.c index 7429f70b9d06..5a8ecc045e3f 100644 --- a/drivers/usb/class/cdc-wdm.c +++ b/drivers/usb/class/cdc-wdm.c @@ -42,6 +42,8 @@ static struct usb_device_id wdm_ids[] = { { } }; +MODULE_DEVICE_TABLE (usb, wdm_ids); + #define WDM_MINOR_BASE 176 diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c index e935be7eb468..3d7793d93031 100644 --- a/drivers/usb/core/driver.c +++ b/drivers/usb/core/driver.c @@ -1610,7 +1610,8 @@ int usb_external_resume_device(struct usb_device *udev) status = usb_resume_both(udev); udev->last_busy = jiffies; usb_pm_unlock(udev); - do_unbind_rebind(udev, DO_REBIND); + if (status == 0) + do_unbind_rebind(udev, DO_REBIND); /* Now that the device is awake, we can start trying to autosuspend * it again. */ diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index d73ce262c365..9b3f16bd12cb 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -3504,7 +3504,7 @@ int usb_reset_device(struct usb_device *udev) USB_INTERFACE_BOUND) rebind = 1; } - if (rebind) + if (ret == 0 && rebind) usb_rebind_intf(cintf); } } diff --git a/drivers/usb/gadget/config.c b/drivers/usb/gadget/config.c index 1ca1c326392a..e1191b9a316a 100644 --- a/drivers/usb/gadget/config.c +++ b/drivers/usb/gadget/config.c @@ -168,7 +168,7 @@ usb_copy_descriptors(struct usb_descriptor_header **src) * usb_find_endpoint - find a copy of an endpoint descriptor * @src: original vector of descriptors * @copy: copy of @src - * @ep: endpoint descriptor found in @src + * @match: endpoint descriptor found in @src * * This returns the copy of the @match descriptor made for @copy. Its * intended use is to help remembering the endpoint descriptor to use diff --git a/drivers/usb/gadget/pxa27x_udc.c b/drivers/usb/gadget/pxa27x_udc.c index bcf375ca3d72..caa37c95802c 100644 --- a/drivers/usb/gadget/pxa27x_udc.c +++ b/drivers/usb/gadget/pxa27x_udc.c @@ -650,7 +650,7 @@ pxa_ep_alloc_request(struct usb_ep *_ep, gfp_t gfp_flags) struct pxa27x_request *req; req = kzalloc(sizeof *req, gfp_flags); - if (!req || !_ep) + if (!req) return NULL; INIT_LIST_HEAD(&req->queue); diff --git a/drivers/usb/gadget/s3c2410_udc.c b/drivers/usb/gadget/s3c2410_udc.c index 48f51b12d2e2..00ba06b44752 100644 --- a/drivers/usb/gadget/s3c2410_udc.c +++ b/drivers/usb/gadget/s3c2410_udc.c @@ -1894,11 +1894,8 @@ static int s3c2410_udc_probe(struct platform_device *pdev) udc->regs_info = debugfs_create_file("registers", S_IRUGO, s3c2410_udc_debugfs_root, udc, &s3c2410_udc_debugfs_fops); - if (IS_ERR(udc->regs_info)) { - dev_warn(dev, "debugfs file creation failed %ld\n", - PTR_ERR(udc->regs_info)); - udc->regs_info = NULL; - } + if (!udc->regs_info) + dev_warn(dev, "debugfs file creation failed\n"); } dev_dbg(dev, "probe ok\n"); diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index 228797e54f9c..56f592dc0b36 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -138,7 +138,6 @@ config USB_OHCI_HCD tristate "OHCI HCD support" depends on USB && USB_ARCH_HAS_OHCI select ISP1301_OMAP if MACH_OMAP_H2 || MACH_OMAP_H3 - select I2C if ARCH_PNX4008 ---help--- The Open Host Controller Interface (OHCI) is a standard for accessing USB 1.1 host controller hardware. It does more in hardware than Intel's @@ -305,3 +304,31 @@ config SUPERH_ON_CHIP_R8A66597 help This driver enables support for the on-chip R8A66597 in the SH7366 and SH7723 processors. + +config USB_WHCI_HCD + tristate "Wireless USB Host Controller Interface (WHCI) driver (EXPERIMENTAL)" + depends on EXPERIMENTAL + depends on PCI && USB + select USB_WUSB + select UWB_WHCI + help + A driver for PCI-based Wireless USB Host Controllers that are + compliant with the WHCI specification. + + To compile this driver a module, choose M here: the module + will be called "whci-hcd". + +config USB_HWA_HCD + tristate "Host Wire Adapter (HWA) driver (EXPERIMENTAL)" + depends on EXPERIMENTAL + depends on USB + select USB_WUSB + select UWB_HWA + help + This driver enables you to connect Wireless USB devices to + your system using a Host Wire Adaptor USB dongle. This is an + UWB Radio Controller and WUSB Host Controller connected to + your machine via USB (specified in WUSB1.0). + + To compile this driver a module, choose M here: the module + will be called "hwa-hc". diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile index f1edda2dcfde..23be22224044 100644 --- a/drivers/usb/host/Makefile +++ b/drivers/usb/host/Makefile @@ -8,6 +8,8 @@ endif isp1760-objs := isp1760-hcd.o isp1760-if.o +obj-$(CONFIG_USB_WHCI_HCD) += whci/ + obj-$(CONFIG_PCI) += pci-quirks.o obj-$(CONFIG_USB_EHCI_HCD) += ehci-hcd.o @@ -19,3 +21,4 @@ obj-$(CONFIG_USB_SL811_CS) += sl811_cs.o obj-$(CONFIG_USB_U132_HCD) += u132-hcd.o obj-$(CONFIG_USB_R8A66597_HCD) += r8a66597-hcd.o obj-$(CONFIG_USB_ISP1760_HCD) += isp1760.o +obj-$(CONFIG_USB_HWA_HCD) += hwa-hc.o diff --git a/drivers/usb/host/hwa-hc.c b/drivers/usb/host/hwa-hc.c new file mode 100644 index 000000000000..64be4d88df11 --- /dev/null +++ b/drivers/usb/host/hwa-hc.c @@ -0,0 +1,925 @@ +/* + * Host Wire Adapter: + * Driver glue, HWA-specific functions, bridges to WAHC and WUSBHC + * + * Copyright (C) 2005-2006 Intel Corporation + * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + * + * + * The HWA driver is a simple layer that forwards requests to the WAHC + * (Wire Adater Host Controller) or WUSBHC (Wireless USB Host + * Controller) layers. + * + * Host Wire Adapter is the 'WUSB 1.0 standard' name for Wireless-USB + * Host Controller that is connected to your system via USB (a USB + * dongle that implements a USB host...). There is also a Device Wired + * Adaptor, DWA (Wireless USB hub) that uses the same mechanism for + * transferring data (it is after all a USB host connected via + * Wireless USB), we have a common layer called Wire Adapter Host + * Controller that does all the hard work. The WUSBHC (Wireless USB + * Host Controller) is the part common to WUSB Host Controllers, the + * HWA and the PCI-based one, that is implemented following the WHCI + * spec. All these layers are implemented in ../wusbcore. + * + * The main functions are hwahc_op_urb_{en,de}queue(), that pass the + * job of converting a URB to a Wire Adapter + * + * Entry points: + * + * hwahc_driver_*() Driver initialization, registration and + * teardown. + * + * hwahc_probe() New device came up, create an instance for + * it [from device enumeration]. + * + * hwahc_disconnect() Remove device instance [from device + * enumeration]. + * + * [__]hwahc_op_*() Host-Wire-Adaptor specific functions for + * starting/stopping/etc (some might be made also + * DWA). + */ +#include <linux/kernel.h> +#include <linux/version.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/workqueue.h> +#include <linux/wait.h> +#include <linux/completion.h> +#include "../wusbcore/wa-hc.h" +#include "../wusbcore/wusbhc.h" + +#define D_LOCAL 0 +#include <linux/uwb/debug.h> + +struct hwahc { + struct wusbhc wusbhc; /* has to be 1st */ + struct wahc wa; + u8 buffer[16]; /* for misc usb transactions */ +}; + +/** + * FIXME should be wusbhc + * + * NOTE: we need to cache the Cluster ID because later...there is no + * way to get it :) + */ +static int __hwahc_set_cluster_id(struct hwahc *hwahc, u8 cluster_id) +{ + int result; + struct wusbhc *wusbhc = &hwahc->wusbhc; + struct wahc *wa = &hwahc->wa; + struct device *dev = &wa->usb_iface->dev; + + result = usb_control_msg(wa->usb_dev, usb_sndctrlpipe(wa->usb_dev, 0), + WUSB_REQ_SET_CLUSTER_ID, + USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE, + cluster_id, + wa->usb_iface->cur_altsetting->desc.bInterfaceNumber, + NULL, 0, 1000 /* FIXME: arbitrary */); + if (result < 0) + dev_err(dev, "Cannot set WUSB Cluster ID to 0x%02x: %d\n", + cluster_id, result); + else + wusbhc->cluster_id = cluster_id; + dev_info(dev, "Wireless USB Cluster ID set to 0x%02x\n", cluster_id); + return result; +} + +static int __hwahc_op_set_num_dnts(struct wusbhc *wusbhc, u8 interval, u8 slots) +{ + struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc); + struct wahc *wa = &hwahc->wa; + + return usb_control_msg(wa->usb_dev, usb_sndctrlpipe(wa->usb_dev, 0), + WUSB_REQ_SET_NUM_DNTS, + USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE, + interval << 8 | slots, + wa->usb_iface->cur_altsetting->desc.bInterfaceNumber, + NULL, 0, 1000 /* FIXME: arbitrary */); +} + +/* + * Reset a WUSB host controller and wait for it to complete doing it. + * + * @usb_hcd: Pointer to WUSB Host Controller instance. + * + */ +static int hwahc_op_reset(struct usb_hcd *usb_hcd) +{ + int result; + struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd); + struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc); + struct device *dev = &hwahc->wa.usb_iface->dev; + + d_fnstart(4, dev, "(hwahc %p)\n", hwahc); + mutex_lock(&wusbhc->mutex); + wa_nep_disarm(&hwahc->wa); + result = __wa_set_feature(&hwahc->wa, WA_RESET); + if (result < 0) { + dev_err(dev, "error commanding HC to reset: %d\n", result); + goto error_unlock; + } + d_printf(3, dev, "reset: waiting for device to change state\n"); + result = __wa_wait_status(&hwahc->wa, WA_STATUS_RESETTING, 0); + if (result < 0) { + dev_err(dev, "error waiting for HC to reset: %d\n", result); + goto error_unlock; + } +error_unlock: + mutex_unlock(&wusbhc->mutex); + d_fnend(4, dev, "(hwahc %p) = %d\n", hwahc, result); + return result; +} + +/* + * FIXME: break this function up + */ +static int hwahc_op_start(struct usb_hcd *usb_hcd) +{ + u8 addr; + int result; + struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd); + struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc); + struct device *dev = &hwahc->wa.usb_iface->dev; + + /* Set up a Host Info WUSB Information Element */ + d_fnstart(4, dev, "(hwahc %p)\n", hwahc); + result = -ENOSPC; + mutex_lock(&wusbhc->mutex); + /* Start the numbering from the top so that the bottom + * range of the unauth addr space is used for devices, + * the top for HCs; use 0xfe - RC# */ + addr = wusb_cluster_id_get(); + if (addr == 0) + goto error_cluster_id_get; + result = __hwahc_set_cluster_id(hwahc, addr); + if (result < 0) + goto error_set_cluster_id; + + result = wa_nep_arm(&hwahc->wa, GFP_KERNEL); + if (result < 0) { + dev_err(dev, "cannot listen to notifications: %d\n", result); + goto error_stop; + } + usb_hcd->uses_new_polling = 1; + usb_hcd->poll_rh = 1; + usb_hcd->state = HC_STATE_RUNNING; + result = 0; +out: + mutex_unlock(&wusbhc->mutex); + d_fnend(4, dev, "(hwahc %p) = %d\n", hwahc, result); + return result; + +error_stop: + __wa_stop(&hwahc->wa); +error_set_cluster_id: + wusb_cluster_id_put(wusbhc->cluster_id); +error_cluster_id_get: + goto out; + +} + +/* + * FIXME: break this function up + */ +static int __hwahc_op_wusbhc_start(struct wusbhc *wusbhc) +{ + int result; + struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc); + struct device *dev = &hwahc->wa.usb_iface->dev; + + /* Set up a Host Info WUSB Information Element */ + d_fnstart(4, dev, "(hwahc %p)\n", hwahc); + result = -ENOSPC; + + result = __wa_set_feature(&hwahc->wa, WA_ENABLE); + if (result < 0) { + dev_err(dev, "error commanding HC to start: %d\n", result); + goto error_stop; + } + result = __wa_wait_status(&hwahc->wa, WA_ENABLE, WA_ENABLE); + if (result < 0) { + dev_err(dev, "error waiting for HC to start: %d\n", result); + goto error_stop; + } + result = 0; +out: + d_fnend(4, dev, "(hwahc %p) = %d\n", hwahc, result); + return result; + +error_stop: + result = __wa_clear_feature(&hwahc->wa, WA_ENABLE); + goto out; +} + +static int hwahc_op_suspend(struct usb_hcd *usb_hcd, pm_message_t msg) +{ + struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd); + struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc); + dev_err(wusbhc->dev, "%s (%p [%p], 0x%lx) UNIMPLEMENTED\n", __func__, + usb_hcd, hwahc, *(unsigned long *) &msg); + return -ENOSYS; +} + +static int hwahc_op_resume(struct usb_hcd *usb_hcd) +{ + struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd); + struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc); + + dev_err(wusbhc->dev, "%s (%p [%p]) UNIMPLEMENTED\n", __func__, + usb_hcd, hwahc); + return -ENOSYS; +} + +static void __hwahc_op_wusbhc_stop(struct wusbhc *wusbhc) +{ + int result; + struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc); + struct device *dev = &hwahc->wa.usb_iface->dev; + + d_fnstart(4, dev, "(hwahc %p)\n", hwahc); + /* Nothing for now */ + d_fnend(4, dev, "(hwahc %p) = %d\n", hwahc, result); + return; +} + +/* + * No need to abort pipes, as when this is called, all the children + * has been disconnected and that has done it [through + * usb_disable_interface() -> usb_disable_endpoint() -> + * hwahc_op_ep_disable() - >rpipe_ep_disable()]. + */ +static void hwahc_op_stop(struct usb_hcd *usb_hcd) +{ + int result; + struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd); + struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc); + struct wahc *wa = &hwahc->wa; + struct device *dev = &wa->usb_iface->dev; + + d_fnstart(4, dev, "(hwahc %p)\n", hwahc); + mutex_lock(&wusbhc->mutex); + wusbhc_stop(wusbhc); + wa_nep_disarm(&hwahc->wa); + result = __wa_stop(&hwahc->wa); + wusb_cluster_id_put(wusbhc->cluster_id); + mutex_unlock(&wusbhc->mutex); + d_fnend(4, dev, "(hwahc %p) = %d\n", hwahc, result); + return; +} + +static int hwahc_op_get_frame_number(struct usb_hcd *usb_hcd) +{ + struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd); + struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc); + + dev_err(wusbhc->dev, "%s (%p [%p]) UNIMPLEMENTED\n", __func__, + usb_hcd, hwahc); + return -ENOSYS; +} + +static int hwahc_op_urb_enqueue(struct usb_hcd *usb_hcd, struct urb *urb, + gfp_t gfp) +{ + struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd); + struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc); + + return wa_urb_enqueue(&hwahc->wa, urb->ep, urb, gfp); +} + +static int hwahc_op_urb_dequeue(struct usb_hcd *usb_hcd, struct urb *urb, + int status) +{ + struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd); + struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc); + + return wa_urb_dequeue(&hwahc->wa, urb); +} + +/* + * Release resources allocated for an endpoint + * + * If there is an associated rpipe to this endpoint, go ahead and put it. + */ +static void hwahc_op_endpoint_disable(struct usb_hcd *usb_hcd, + struct usb_host_endpoint *ep) +{ + struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd); + struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc); + + rpipe_ep_disable(&hwahc->wa, ep); +} + +/* + * Set the UWB MAS allocation for the WUSB cluster + * + * @stream_index: stream to use (-1 for cancelling the allocation) + * @mas: mas bitmap to use + */ +static int __hwahc_op_bwa_set(struct wusbhc *wusbhc, s8 stream_index, + const struct uwb_mas_bm *mas) +{ + int result; + struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc); + struct wahc *wa = &hwahc->wa; + struct device *dev = &wa->usb_iface->dev; + u8 mas_le[UWB_NUM_MAS/8]; + + /* Set the stream index */ + result = usb_control_msg(wa->usb_dev, usb_sndctrlpipe(wa->usb_dev, 0), + WUSB_REQ_SET_STREAM_IDX, + USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE, + stream_index, + wa->usb_iface->cur_altsetting->desc.bInterfaceNumber, + NULL, 0, 1000 /* FIXME: arbitrary */); + if (result < 0) { + dev_err(dev, "Cannot set WUSB stream index: %d\n", result); + goto out; + } + uwb_mas_bm_copy_le(mas_le, mas); + /* Set the MAS allocation */ + result = usb_control_msg(wa->usb_dev, usb_sndctrlpipe(wa->usb_dev, 0), + WUSB_REQ_SET_WUSB_MAS, + USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE, + 0, wa->usb_iface->cur_altsetting->desc.bInterfaceNumber, + mas_le, 32, 1000 /* FIXME: arbitrary */); + if (result < 0) + dev_err(dev, "Cannot set WUSB MAS allocation: %d\n", result); +out: + return result; +} + +/* + * Add an IE to the host's MMC + * + * @interval: See WUSB1.0[8.5.3.1] + * @repeat_cnt: See WUSB1.0[8.5.3.1] + * @handle: See WUSB1.0[8.5.3.1] + * @wuie: Pointer to the header of the WUSB IE data to add. + * MUST BE allocated in a kmalloc buffer (no stack or + * vmalloc). + * + * NOTE: the format of the WUSB IEs for MMCs are different to the + * normal MBOA MAC IEs (IE Id + Length in MBOA MAC vs. Length + + * Id in WUSB IEs). Standards...you gotta love'em. + */ +static int __hwahc_op_mmcie_add(struct wusbhc *wusbhc, u8 interval, + u8 repeat_cnt, u8 handle, + struct wuie_hdr *wuie) +{ + struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc); + struct wahc *wa = &hwahc->wa; + u8 iface_no = wa->usb_iface->cur_altsetting->desc.bInterfaceNumber; + + return usb_control_msg(wa->usb_dev, usb_sndctrlpipe(wa->usb_dev, 0), + WUSB_REQ_ADD_MMC_IE, + USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE, + interval << 8 | repeat_cnt, + handle << 8 | iface_no, + wuie, wuie->bLength, 1000 /* FIXME: arbitrary */); +} + +/* + * Remove an IE to the host's MMC + * + * @handle: See WUSB1.0[8.5.3.1] + */ +static int __hwahc_op_mmcie_rm(struct wusbhc *wusbhc, u8 handle) +{ + struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc); + struct wahc *wa = &hwahc->wa; + u8 iface_no = wa->usb_iface->cur_altsetting->desc.bInterfaceNumber; + return usb_control_msg(wa->usb_dev, usb_sndctrlpipe(wa->usb_dev, 0), + WUSB_REQ_REMOVE_MMC_IE, + USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE, + 0, handle << 8 | iface_no, + NULL, 0, 1000 /* FIXME: arbitrary */); +} + +/* + * Update device information for a given fake port + * + * @port_idx: Fake port to which device is connected (wusbhc index, not + * USB port number). + */ +static int __hwahc_op_dev_info_set(struct wusbhc *wusbhc, + struct wusb_dev *wusb_dev) +{ + struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc); + struct wahc *wa = &hwahc->wa; + u8 iface_no = wa->usb_iface->cur_altsetting->desc.bInterfaceNumber; + struct hwa_dev_info *dev_info; + int ret; + + /* fill out the Device Info buffer and send it */ + dev_info = kzalloc(sizeof(struct hwa_dev_info), GFP_KERNEL); + if (!dev_info) + return -ENOMEM; + uwb_mas_bm_copy_le(dev_info->bmDeviceAvailability, + &wusb_dev->availability); + dev_info->bDeviceAddress = wusb_dev->addr; + + /* + * If the descriptors haven't been read yet, use a default PHY + * rate of 53.3 Mbit/s only. The correct value will be used + * when this will be called again as part of the + * authentication process (which occurs after the descriptors + * have been read). + */ + if (wusb_dev->wusb_cap_descr) + dev_info->wPHYRates = wusb_dev->wusb_cap_descr->wPHYRates; + else + dev_info->wPHYRates = cpu_to_le16(USB_WIRELESS_PHY_53); + + ret = usb_control_msg(wa->usb_dev, usb_sndctrlpipe(wa->usb_dev, 0), + WUSB_REQ_SET_DEV_INFO, + USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE, + 0, wusb_dev->port_idx << 8 | iface_no, + dev_info, sizeof(struct hwa_dev_info), + 1000 /* FIXME: arbitrary */); + kfree(dev_info); + return ret; +} + +/* + * Set host's idea of which encryption (and key) method to use when + * talking to ad evice on a given port. + * + * If key is NULL, it means disable encryption for that "virtual port" + * (used when we disconnect). + */ +static int __hwahc_dev_set_key(struct wusbhc *wusbhc, u8 port_idx, u32 tkid, + const void *key, size_t key_size, + u8 key_idx) +{ + int result = -ENOMEM; + struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc); + struct wahc *wa = &hwahc->wa; + u8 iface_no = wa->usb_iface->cur_altsetting->desc.bInterfaceNumber; + struct usb_key_descriptor *keyd; + size_t keyd_len; + + keyd_len = sizeof(*keyd) + key_size; + keyd = kzalloc(keyd_len, GFP_KERNEL); + if (keyd == NULL) + return -ENOMEM; + + keyd->bLength = keyd_len; + keyd->bDescriptorType = USB_DT_KEY; + keyd->tTKID[0] = (tkid >> 0) & 0xff; + keyd->tTKID[1] = (tkid >> 8) & 0xff; + keyd->tTKID[2] = (tkid >> 16) & 0xff; + memcpy(keyd->bKeyData, key, key_size); + + result = usb_control_msg(wa->usb_dev, usb_sndctrlpipe(wa->usb_dev, 0), + USB_REQ_SET_DESCRIPTOR, + USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE, + USB_DT_KEY << 8 | key_idx, + port_idx << 8 | iface_no, + keyd, keyd_len, 1000 /* FIXME: arbitrary */); + + memset(keyd, 0, sizeof(*keyd)); /* clear keys etc. */ + kfree(keyd); + return result; +} + +/* + * Set host's idea of which encryption (and key) method to use when + * talking to ad evice on a given port. + * + * If key is NULL, it means disable encryption for that "virtual port" + * (used when we disconnect). + */ +static int __hwahc_op_set_ptk(struct wusbhc *wusbhc, u8 port_idx, u32 tkid, + const void *key, size_t key_size) +{ + int result = -ENOMEM; + struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc); + struct wahc *wa = &hwahc->wa; + u8 iface_no = wa->usb_iface->cur_altsetting->desc.bInterfaceNumber; + u8 encryption_value; + + /* Tell the host which key to use to talk to the device */ + if (key) { + u8 key_idx = wusb_key_index(0, WUSB_KEY_INDEX_TYPE_PTK, + WUSB_KEY_INDEX_ORIGINATOR_HOST); + + result = __hwahc_dev_set_key(wusbhc, port_idx, tkid, + key, key_size, key_idx); + if (result < 0) + goto error_set_key; + encryption_value = wusbhc->ccm1_etd->bEncryptionValue; + } else { + /* FIXME: this should come from wusbhc->etd[UNSECURE].value */ + encryption_value = 0; + } + + /* Set the encryption type for commmunicating with the device */ + result = usb_control_msg(wa->usb_dev, usb_sndctrlpipe(wa->usb_dev, 0), + USB_REQ_SET_ENCRYPTION, + USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE, + encryption_value, port_idx << 8 | iface_no, + NULL, 0, 1000 /* FIXME: arbitrary */); + if (result < 0) + dev_err(wusbhc->dev, "Can't set host's WUSB encryption for " + "port index %u to %s (value %d): %d\n", port_idx, + wusb_et_name(wusbhc->ccm1_etd->bEncryptionType), + wusbhc->ccm1_etd->bEncryptionValue, result); +error_set_key: + return result; +} + +/* + * Set host's GTK key + */ +static int __hwahc_op_set_gtk(struct wusbhc *wusbhc, u32 tkid, + const void *key, size_t key_size) +{ + u8 key_idx = wusb_key_index(0, WUSB_KEY_INDEX_TYPE_GTK, + WUSB_KEY_INDEX_ORIGINATOR_HOST); + + return __hwahc_dev_set_key(wusbhc, 0, tkid, key, key_size, key_idx); +} + +/* + * Get the Wire Adapter class-specific descriptor + * + * NOTE: this descriptor comes with the big bundled configuration + * descriptor that includes the interfaces' and endpoints', so + * we just look for it in the cached copy kept by the USB stack. + * + * NOTE2: We convert LE fields to CPU order. + */ +static int wa_fill_descr(struct wahc *wa) +{ + int result; + struct device *dev = &wa->usb_iface->dev; + char *itr; + struct usb_device *usb_dev = wa->usb_dev; + struct usb_descriptor_header *hdr; + struct usb_wa_descriptor *wa_descr; + size_t itr_size, actconfig_idx; + + actconfig_idx = (usb_dev->actconfig - usb_dev->config) / + sizeof(usb_dev->config[0]); + itr = usb_dev->rawdescriptors[actconfig_idx]; + itr_size = le16_to_cpu(usb_dev->actconfig->desc.wTotalLength); + while (itr_size >= sizeof(*hdr)) { + hdr = (struct usb_descriptor_header *) itr; + d_printf(3, dev, "Extra device descriptor: " + "type %02x/%u bytes @ %zu (%zu left)\n", + hdr->bDescriptorType, hdr->bLength, + (itr - usb_dev->rawdescriptors[actconfig_idx]), + itr_size); + if (hdr->bDescriptorType == USB_DT_WIRE_ADAPTER) + goto found; + itr += hdr->bLength; + itr_size -= hdr->bLength; + } + dev_err(dev, "cannot find Wire Adapter Class descriptor\n"); + return -ENODEV; + +found: + result = -EINVAL; + if (hdr->bLength > itr_size) { /* is it available? */ + dev_err(dev, "incomplete Wire Adapter Class descriptor " + "(%zu bytes left, %u needed)\n", + itr_size, hdr->bLength); + goto error; + } + if (hdr->bLength < sizeof(*wa->wa_descr)) { + dev_err(dev, "short Wire Adapter Class descriptor\n"); + goto error; + } + wa->wa_descr = wa_descr = (struct usb_wa_descriptor *) hdr; + /* Make LE fields CPU order */ + wa_descr->bcdWAVersion = le16_to_cpu(wa_descr->bcdWAVersion); + wa_descr->wNumRPipes = le16_to_cpu(wa_descr->wNumRPipes); + wa_descr->wRPipeMaxBlock = le16_to_cpu(wa_descr->wRPipeMaxBlock); + if (wa_descr->bcdWAVersion > 0x0100) + dev_warn(dev, "Wire Adapter v%d.%d newer than groked v1.0\n", + wa_descr->bcdWAVersion & 0xff00 >> 8, + wa_descr->bcdWAVersion & 0x00ff); + result = 0; +error: + return result; +} + +static struct hc_driver hwahc_hc_driver = { + .description = "hwa-hcd", + .product_desc = "Wireless USB HWA host controller", + .hcd_priv_size = sizeof(struct hwahc) - sizeof(struct usb_hcd), + .irq = NULL, /* FIXME */ + .flags = HCD_USB2, /* FIXME */ + .reset = hwahc_op_reset, + .start = hwahc_op_start, + .pci_suspend = hwahc_op_suspend, + .pci_resume = hwahc_op_resume, + .stop = hwahc_op_stop, + .get_frame_number = hwahc_op_get_frame_number, + .urb_enqueue = hwahc_op_urb_enqueue, + .urb_dequeue = hwahc_op_urb_dequeue, + .endpoint_disable = hwahc_op_endpoint_disable, + + .hub_status_data = wusbhc_rh_status_data, + .hub_control = wusbhc_rh_control, + .bus_suspend = wusbhc_rh_suspend, + .bus_resume = wusbhc_rh_resume, + .start_port_reset = wusbhc_rh_start_port_reset, +}; + +static int hwahc_security_create(struct hwahc *hwahc) +{ + int result; + struct wusbhc *wusbhc = &hwahc->wusbhc; + struct usb_device *usb_dev = hwahc->wa.usb_dev; + struct device *dev = &usb_dev->dev; + struct usb_security_descriptor *secd; + struct usb_encryption_descriptor *etd; + void *itr, *top; + size_t itr_size, needed, bytes; + u8 index; + char buf[64]; + + /* Find the host's security descriptors in the config descr bundle */ + index = (usb_dev->actconfig - usb_dev->config) / + sizeof(usb_dev->config[0]); + itr = usb_dev->rawdescriptors[index]; + itr_size = le16_to_cpu(usb_dev->actconfig->desc.wTotalLength); + top = itr + itr_size; + result = __usb_get_extra_descriptor(usb_dev->rawdescriptors[index], + le16_to_cpu(usb_dev->actconfig->desc.wTotalLength), + USB_DT_SECURITY, (void **) &secd); + if (result == -1) { + dev_warn(dev, "BUG? WUSB host has no security descriptors\n"); + return 0; + } + needed = sizeof(*secd); + if (top - (void *)secd < needed) { + dev_err(dev, "BUG? Not enough data to process security " + "descriptor header (%zu bytes left vs %zu needed)\n", + top - (void *) secd, needed); + return 0; + } + needed = le16_to_cpu(secd->wTotalLength); + if (top - (void *)secd < needed) { + dev_err(dev, "BUG? Not enough data to process security " + "descriptors (%zu bytes left vs %zu needed)\n", + top - (void *) secd, needed); + return 0; + } + /* Walk over the sec descriptors and store CCM1's on wusbhc */ + itr = (void *) secd + sizeof(*secd); + top = (void *) secd + le16_to_cpu(secd->wTotalLength); + index = 0; + bytes = 0; + while (itr < top) { + etd = itr; + if (top - itr < sizeof(*etd)) { + dev_err(dev, "BUG: bad host security descriptor; " + "not enough data (%zu vs %zu left)\n", + top - itr, sizeof(*etd)); + break; + } + if (etd->bLength < sizeof(*etd)) { + dev_err(dev, "BUG: bad host encryption descriptor; " + "descriptor is too short " + "(%zu vs %zu needed)\n", + (size_t)etd->bLength, sizeof(*etd)); + break; + } + itr += etd->bLength; + bytes += snprintf(buf + bytes, sizeof(buf) - bytes, + "%s (0x%02x) ", + wusb_et_name(etd->bEncryptionType), + etd->bEncryptionValue); + wusbhc->ccm1_etd = etd; + } + dev_info(dev, "supported encryption types: %s\n", buf); + if (wusbhc->ccm1_etd == NULL) { + dev_err(dev, "E: host doesn't support CCM-1 crypto\n"); + return 0; + } + /* Pretty print what we support */ + return 0; +} + +static void hwahc_security_release(struct hwahc *hwahc) +{ + /* nothing to do here so far... */ +} + +static int hwahc_create(struct hwahc *hwahc, struct usb_interface *iface) +{ + int result; + struct device *dev = &iface->dev; + struct wusbhc *wusbhc = &hwahc->wusbhc; + struct wahc *wa = &hwahc->wa; + struct usb_device *usb_dev = interface_to_usbdev(iface); + + wa->usb_dev = usb_get_dev(usb_dev); /* bind the USB device */ + wa->usb_iface = usb_get_intf(iface); + wusbhc->dev = dev; + wusbhc->uwb_rc = uwb_rc_get_by_grandpa(iface->dev.parent); + if (wusbhc->uwb_rc == NULL) { + result = -ENODEV; + dev_err(dev, "Cannot get associated UWB Host Controller\n"); + goto error_rc_get; + } + result = wa_fill_descr(wa); /* Get the device descriptor */ + if (result < 0) + goto error_fill_descriptor; + if (wa->wa_descr->bNumPorts > USB_MAXCHILDREN) { + dev_err(dev, "FIXME: USB_MAXCHILDREN too low for WUSB " + "adapter (%u ports)\n", wa->wa_descr->bNumPorts); + wusbhc->ports_max = USB_MAXCHILDREN; + } else { + wusbhc->ports_max = wa->wa_descr->bNumPorts; + } + wusbhc->mmcies_max = wa->wa_descr->bNumMMCIEs; + wusbhc->start = __hwahc_op_wusbhc_start; + wusbhc->stop = __hwahc_op_wusbhc_stop; + wusbhc->mmcie_add = __hwahc_op_mmcie_add; + wusbhc->mmcie_rm = __hwahc_op_mmcie_rm; + wusbhc->dev_info_set = __hwahc_op_dev_info_set; + wusbhc->bwa_set = __hwahc_op_bwa_set; + wusbhc->set_num_dnts = __hwahc_op_set_num_dnts; + wusbhc->set_ptk = __hwahc_op_set_ptk; + wusbhc->set_gtk = __hwahc_op_set_gtk; + result = hwahc_security_create(hwahc); + if (result < 0) { + dev_err(dev, "Can't initialize security: %d\n", result); + goto error_security_create; + } + wa->wusb = wusbhc; /* FIXME: ugly, need to fix */ + result = wusbhc_create(&hwahc->wusbhc); + if (result < 0) { + dev_err(dev, "Can't create WUSB HC structures: %d\n", result); + goto error_wusbhc_create; + } + result = wa_create(&hwahc->wa, iface); + if (result < 0) + goto error_wa_create; + return 0; + +error_wa_create: + wusbhc_destroy(&hwahc->wusbhc); +error_wusbhc_create: + /* WA Descr fill allocs no resources */ +error_security_create: +error_fill_descriptor: + uwb_rc_put(wusbhc->uwb_rc); +error_rc_get: + usb_put_intf(iface); + usb_put_dev(usb_dev); + return result; +} + +static void hwahc_destroy(struct hwahc *hwahc) +{ + struct wusbhc *wusbhc = &hwahc->wusbhc; + + d_fnstart(1, NULL, "(hwahc %p)\n", hwahc); + mutex_lock(&wusbhc->mutex); + __wa_destroy(&hwahc->wa); + wusbhc_destroy(&hwahc->wusbhc); + hwahc_security_release(hwahc); + hwahc->wusbhc.dev = NULL; + uwb_rc_put(wusbhc->uwb_rc); + usb_put_intf(hwahc->wa.usb_iface); + usb_put_dev(hwahc->wa.usb_dev); + mutex_unlock(&wusbhc->mutex); + d_fnend(1, NULL, "(hwahc %p) = void\n", hwahc); +} + +static void hwahc_init(struct hwahc *hwahc) +{ + wa_init(&hwahc->wa); +} + +static int hwahc_probe(struct usb_interface *usb_iface, + const struct usb_device_id *id) +{ + int result; + struct usb_hcd *usb_hcd; + struct wusbhc *wusbhc; + struct hwahc *hwahc; + struct device *dev = &usb_iface->dev; + + d_fnstart(4, dev, "(%p, %p)\n", usb_iface, id); + result = -ENOMEM; + usb_hcd = usb_create_hcd(&hwahc_hc_driver, &usb_iface->dev, "wusb-hwa"); + if (usb_hcd == NULL) { + dev_err(dev, "unable to allocate instance\n"); + goto error_alloc; + } + usb_hcd->wireless = 1; + usb_hcd->flags |= HCD_FLAG_SAW_IRQ; + wusbhc = usb_hcd_to_wusbhc(usb_hcd); + hwahc = container_of(wusbhc, struct hwahc, wusbhc); + hwahc_init(hwahc); + result = hwahc_create(hwahc, usb_iface); + if (result < 0) { + dev_err(dev, "Cannot initialize internals: %d\n", result); + goto error_hwahc_create; + } + result = usb_add_hcd(usb_hcd, 0, 0); + if (result < 0) { + dev_err(dev, "Cannot add HCD: %d\n", result); + goto error_add_hcd; + } + result = wusbhc_b_create(&hwahc->wusbhc); + if (result < 0) { + dev_err(dev, "Cannot setup phase B of WUSBHC: %d\n", result); + goto error_wusbhc_b_create; + } + d_fnend(4, dev, "(%p, %p) = 0\n", usb_iface, id); + return 0; + +error_wusbhc_b_create: + usb_remove_hcd(usb_hcd); +error_add_hcd: + hwahc_destroy(hwahc); +error_hwahc_create: + usb_put_hcd(usb_hcd); +error_alloc: + d_fnend(4, dev, "(%p, %p) = %d\n", usb_iface, id, result); + return result; +} + +static void hwahc_disconnect(struct usb_interface *usb_iface) +{ + struct usb_hcd *usb_hcd; + struct wusbhc *wusbhc; + struct hwahc *hwahc; + + usb_hcd = usb_get_intfdata(usb_iface); + wusbhc = usb_hcd_to_wusbhc(usb_hcd); + hwahc = container_of(wusbhc, struct hwahc, wusbhc); + + d_fnstart(1, NULL, "(hwahc %p [usb_iface %p])\n", hwahc, usb_iface); + wusbhc_b_destroy(&hwahc->wusbhc); + usb_remove_hcd(usb_hcd); + hwahc_destroy(hwahc); + usb_put_hcd(usb_hcd); + d_fnend(1, NULL, "(hwahc %p [usb_iface %p]) = void\n", hwahc, + usb_iface); +} + +/** USB device ID's that we handle */ +static struct usb_device_id hwahc_id_table[] = { + /* FIXME: use class labels for this */ + { USB_INTERFACE_INFO(0xe0, 0x02, 0x01), }, + {}, +}; +MODULE_DEVICE_TABLE(usb, hwahc_id_table); + +static struct usb_driver hwahc_driver = { + .name = "hwa-hc", + .probe = hwahc_probe, + .disconnect = hwahc_disconnect, + .id_table = hwahc_id_table, +}; + +static int __init hwahc_driver_init(void) +{ + int result; + result = usb_register(&hwahc_driver); + if (result < 0) { + printk(KERN_ERR "WA-CDS: Cannot register USB driver: %d\n", + result); + goto error_usb_register; + } + return 0; + +error_usb_register: + return result; + +} +module_init(hwahc_driver_init); + +static void __exit hwahc_driver_exit(void) +{ + usb_deregister(&hwahc_driver); +} +module_exit(hwahc_driver_exit); + + +MODULE_AUTHOR("Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>"); +MODULE_DESCRIPTION("Host Wired Adapter USB Host Control Driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c index 8647dab0d7f9..8aa3f4556a32 100644 --- a/drivers/usb/host/ohci-hcd.c +++ b/drivers/usb/host/ohci-hcd.c @@ -1075,12 +1075,18 @@ MODULE_LICENSE ("GPL"); #define SM501_OHCI_DRIVER ohci_hcd_sm501_driver #endif +#ifdef CONFIG_MFD_TC6393XB +#include "ohci-tmio.c" +#define TMIO_OHCI_DRIVER ohci_hcd_tmio_driver +#endif + #if !defined(PCI_DRIVER) && \ !defined(PLATFORM_DRIVER) && \ !defined(OF_PLATFORM_DRIVER) && \ !defined(SA1111_DRIVER) && \ !defined(PS3_SYSTEM_BUS_DRIVER) && \ !defined(SM501_OHCI_DRIVER) && \ + !defined(TMIO_OHCI_DRIVER) && \ !defined(SSB_OHCI_DRIVER) #error "missing bus glue for ohci-hcd" #endif @@ -1147,13 +1153,25 @@ static int __init ohci_hcd_mod_init(void) goto error_sm501; #endif +#ifdef TMIO_OHCI_DRIVER + retval = platform_driver_register(&TMIO_OHCI_DRIVER); + if (retval < 0) + goto error_tmio; +#endif + return retval; /* Error path */ +#ifdef TMIO_OHCI_DRIVER + platform_driver_unregister(&TMIO_OHCI_DRIVER); + error_tmio: +#endif #ifdef SM501_OHCI_DRIVER + platform_driver_unregister(&SM501_OHCI_DRIVER); error_sm501: #endif #ifdef SSB_OHCI_DRIVER + ssb_driver_unregister(&SSB_OHCI_DRIVER); error_ssb: #endif #ifdef PCI_DRIVER @@ -1189,6 +1207,9 @@ module_init(ohci_hcd_mod_init); static void __exit ohci_hcd_mod_exit(void) { +#ifdef TMIO_OHCI_DRIVER + platform_driver_unregister(&TMIO_OHCI_DRIVER); +#endif #ifdef SM501_OHCI_DRIVER platform_driver_unregister(&SM501_OHCI_DRIVER); #endif diff --git a/drivers/usb/host/ohci-tmio.c b/drivers/usb/host/ohci-tmio.c new file mode 100644 index 000000000000..f9f134af0bd1 --- /dev/null +++ b/drivers/usb/host/ohci-tmio.c @@ -0,0 +1,376 @@ +/* + * OHCI HCD(Host Controller Driver) for USB. + * + *(C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at> + *(C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net> + *(C) Copyright 2002 Hewlett-Packard Company + * + * Bus glue for Toshiba Mobile IO(TMIO) Controller's OHCI core + * (C) Copyright 2005 Chris Humbert <mahadri-usb@drigon.com> + * (C) Copyright 2007, 2008 Dmitry Baryshkov <dbaryshkov@gmail.com> + * + * This is known to work with the following variants: + * TC6393XB revision 3 (32kB SRAM) + * + * The TMIO's OHCI core DMAs through a small internal buffer that + * is directly addressable by the CPU. + * + * Written from sparse documentation from Toshiba and Sharp's driver + * for the 2.4 kernel, + * usb-ohci-tc6393.c(C) Copyright 2004 Lineo Solutions, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/*#include <linux/fs.h> +#include <linux/mount.h> +#include <linux/pagemap.h> +#include <linux/init.h> +#include <linux/namei.h> +#include <linux/sched.h>*/ +#include <linux/platform_device.h> +#include <linux/mfd/core.h> +#include <linux/mfd/tmio.h> +#include <linux/dma-mapping.h> + +/*-------------------------------------------------------------------------*/ + +/* + * USB Host Controller Configuration Register + */ +#define CCR_REVID 0x08 /* b Revision ID */ +#define CCR_BASE 0x10 /* l USB Control Register Base Address Low */ +#define CCR_ILME 0x40 /* b Internal Local Memory Enable */ +#define CCR_PM 0x4c /* w Power Management */ +#define CCR_INTC 0x50 /* b INT Control */ +#define CCR_LMW1L 0x54 /* w Local Memory Window 1 LMADRS Low */ +#define CCR_LMW1H 0x56 /* w Local Memory Window 1 LMADRS High */ +#define CCR_LMW1BL 0x58 /* w Local Memory Window 1 Base Address Low */ +#define CCR_LMW1BH 0x5A /* w Local Memory Window 1 Base Address High */ +#define CCR_LMW2L 0x5C /* w Local Memory Window 2 LMADRS Low */ +#define CCR_LMW2H 0x5E /* w Local Memory Window 2 LMADRS High */ +#define CCR_LMW2BL 0x60 /* w Local Memory Window 2 Base Address Low */ +#define CCR_LMW2BH 0x62 /* w Local Memory Window 2 Base Address High */ +#define CCR_MISC 0xFC /* b MISC */ + +#define CCR_PM_GKEN 0x0001 +#define CCR_PM_CKRNEN 0x0002 +#define CCR_PM_USBPW1 0x0004 +#define CCR_PM_USBPW2 0x0008 +#define CCR_PM_USBPW3 0x0008 +#define CCR_PM_PMEE 0x0100 +#define CCR_PM_PMES 0x8000 + +/*-------------------------------------------------------------------------*/ + +struct tmio_hcd { + void __iomem *ccr; + spinlock_t lock; /* protects RMW cycles */ +}; + +#define hcd_to_tmio(hcd) ((struct tmio_hcd *)(hcd_to_ohci(hcd) + 1)) + +/*-------------------------------------------------------------------------*/ + +static void tmio_write_pm(struct platform_device *dev) +{ + struct usb_hcd *hcd = platform_get_drvdata(dev); + struct tmio_hcd *tmio = hcd_to_tmio(hcd); + u16 pm; + unsigned long flags; + + spin_lock_irqsave(&tmio->lock, flags); + + pm = CCR_PM_GKEN | CCR_PM_CKRNEN | + CCR_PM_PMEE | CCR_PM_PMES; + + tmio_iowrite16(pm, tmio->ccr + CCR_PM); + spin_unlock_irqrestore(&tmio->lock, flags); +} + +static void tmio_stop_hc(struct platform_device *dev) +{ + struct usb_hcd *hcd = platform_get_drvdata(dev); + struct ohci_hcd *ohci = hcd_to_ohci(hcd); + struct tmio_hcd *tmio = hcd_to_tmio(hcd); + u16 pm; + + pm = CCR_PM_GKEN | CCR_PM_CKRNEN; + switch (ohci->num_ports) { + default: + dev_err(&dev->dev, "Unsupported amount of ports: %d\n", ohci->num_ports); + case 3: + pm |= CCR_PM_USBPW3; + case 2: + pm |= CCR_PM_USBPW2; + case 1: + pm |= CCR_PM_USBPW1; + } + tmio_iowrite8(0, tmio->ccr + CCR_INTC); + tmio_iowrite8(0, tmio->ccr + CCR_ILME); + tmio_iowrite16(0, tmio->ccr + CCR_BASE); + tmio_iowrite16(0, tmio->ccr + CCR_BASE + 2); + tmio_iowrite16(pm, tmio->ccr + CCR_PM); +} + +static void tmio_start_hc(struct platform_device *dev) +{ + struct usb_hcd *hcd = platform_get_drvdata(dev); + struct tmio_hcd *tmio = hcd_to_tmio(hcd); + unsigned long base = hcd->rsrc_start; + + tmio_write_pm(dev); + tmio_iowrite16(base, tmio->ccr + CCR_BASE); + tmio_iowrite16(base >> 16, tmio->ccr + CCR_BASE + 2); + tmio_iowrite8(1, tmio->ccr + CCR_ILME); + tmio_iowrite8(2, tmio->ccr + CCR_INTC); + + dev_info(&dev->dev, "revision %d @ 0x%08llx, irq %d\n", + tmio_ioread8(tmio->ccr + CCR_REVID), hcd->rsrc_start, hcd->irq); +} + +static int ohci_tmio_start(struct usb_hcd *hcd) +{ + struct ohci_hcd *ohci = hcd_to_ohci(hcd); + int ret; + + if ((ret = ohci_init(ohci)) < 0) + return ret; + + if ((ret = ohci_run(ohci)) < 0) { + err("can't start %s", hcd->self.bus_name); + ohci_stop(hcd); + return ret; + } + + return 0; +} + +static const struct hc_driver ohci_tmio_hc_driver = { + .description = hcd_name, + .product_desc = "TMIO OHCI USB Host Controller", + .hcd_priv_size = sizeof(struct ohci_hcd) + sizeof (struct tmio_hcd), + + /* generic hardware linkage */ + .irq = ohci_irq, + .flags = HCD_USB11 | HCD_MEMORY | HCD_LOCAL_MEM, + + /* basic lifecycle operations */ + .start = ohci_tmio_start, + .stop = ohci_stop, + .shutdown = ohci_shutdown, + + /* managing i/o requests and associated device resources */ + .urb_enqueue = ohci_urb_enqueue, + .urb_dequeue = ohci_urb_dequeue, + .endpoint_disable = ohci_endpoint_disable, + + /* scheduling support */ + .get_frame_number = ohci_get_frame, + + /* root hub support */ + .hub_status_data = ohci_hub_status_data, + .hub_control = ohci_hub_control, +#ifdef CONFIG_PM + .bus_suspend = ohci_bus_suspend, + .bus_resume = ohci_bus_resume, +#endif + .start_port_reset = ohci_start_port_reset, +}; + +/*-------------------------------------------------------------------------*/ +static struct platform_driver ohci_hcd_tmio_driver; + +static int __devinit ohci_hcd_tmio_drv_probe(struct platform_device *dev) +{ + struct mfd_cell *cell = dev->dev.platform_data; + struct resource *regs = platform_get_resource(dev, IORESOURCE_MEM, 0); + struct resource *config = platform_get_resource(dev, IORESOURCE_MEM, 1); + struct resource *sram = platform_get_resource(dev, IORESOURCE_MEM, 2); + int irq = platform_get_irq(dev, 0); + struct tmio_hcd *tmio; + struct ohci_hcd *ohci; + struct usb_hcd *hcd; + int ret; + + if (usb_disabled()) + return -ENODEV; + + if (!cell) + return -EINVAL; + + hcd = usb_create_hcd(&ohci_tmio_hc_driver, &dev->dev, dev->dev.bus_id); + if (!hcd) { + ret = -ENOMEM; + goto err_usb_create_hcd; + } + + hcd->rsrc_start = regs->start; + hcd->rsrc_len = regs->end - regs->start + 1; + + tmio = hcd_to_tmio(hcd); + + spin_lock_init(&tmio->lock); + + tmio->ccr = ioremap(config->start, config->end - config->start + 1); + if (!tmio->ccr) { + ret = -ENOMEM; + goto err_ioremap_ccr; + } + + hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len); + if (!hcd->regs) { + ret = -ENOMEM; + goto err_ioremap_regs; + } + + if (!dma_declare_coherent_memory(&dev->dev, sram->start, + sram->start, + sram->end - sram->start + 1, + DMA_MEMORY_MAP | DMA_MEMORY_EXCLUSIVE)) { + ret = -EBUSY; + goto err_dma_declare; + } + + if (cell->enable) { + ret = cell->enable(dev); + if (ret) + goto err_enable; + } + + tmio_start_hc(dev); + ohci = hcd_to_ohci(hcd); + ohci_hcd_init(ohci); + + ret = usb_add_hcd(hcd, irq, IRQF_DISABLED); + if (ret) + goto err_add_hcd; + + if (ret == 0) + return ret; + + usb_remove_hcd(hcd); + +err_add_hcd: + tmio_stop_hc(dev); + if (cell->disable) + cell->disable(dev); +err_enable: + dma_release_declared_memory(&dev->dev); +err_dma_declare: + iounmap(hcd->regs); +err_ioremap_regs: + iounmap(tmio->ccr); +err_ioremap_ccr: + usb_put_hcd(hcd); +err_usb_create_hcd: + + return ret; +} + +static int __devexit ohci_hcd_tmio_drv_remove(struct platform_device *dev) +{ + struct usb_hcd *hcd = platform_get_drvdata(dev); + struct tmio_hcd *tmio = hcd_to_tmio(hcd); + struct mfd_cell *cell = dev->dev.platform_data; + + usb_remove_hcd(hcd); + tmio_stop_hc(dev); + if (cell->disable) + cell->disable(dev); + dma_release_declared_memory(&dev->dev); + iounmap(hcd->regs); + iounmap(tmio->ccr); + usb_put_hcd(hcd); + + platform_set_drvdata(dev, NULL); + + return 0; +} + +#ifdef CONFIG_PM +static int ohci_hcd_tmio_drv_suspend(struct platform_device *dev, pm_message_t state) +{ + struct mfd_cell *cell = dev->dev.platform_data; + struct usb_hcd *hcd = platform_get_drvdata(dev); + struct ohci_hcd *ohci = hcd_to_ohci(hcd); + struct tmio_hcd *tmio = hcd_to_tmio(hcd); + unsigned long flags; + u8 misc; + int ret; + + if (time_before(jiffies, ohci->next_statechange)) + msleep(5); + ohci->next_statechange = jiffies; + + spin_lock_irqsave(&tmio->lock, flags); + + misc = tmio_ioread8(tmio->ccr + CCR_MISC); + misc |= 1 << 3; /* USSUSP */ + tmio_iowrite8(misc, tmio->ccr + CCR_MISC); + + spin_unlock_irqrestore(&tmio->lock, flags); + + if (cell->suspend) { + ret = cell->suspend(dev); + if (ret) + return ret; + } + + hcd->state = HC_STATE_SUSPENDED; + + return 0; +} + +static int ohci_hcd_tmio_drv_resume(struct platform_device *dev) +{ + struct mfd_cell *cell = dev->dev.platform_data; + struct usb_hcd *hcd = platform_get_drvdata(dev); + struct ohci_hcd *ohci = hcd_to_ohci(hcd); + struct tmio_hcd *tmio = hcd_to_tmio(hcd); + unsigned long flags; + u8 misc; + int ret; + + if (time_before(jiffies, ohci->next_statechange)) + msleep(5); + ohci->next_statechange = jiffies; + + if (cell->resume) { + ret = cell->resume(dev); + if (ret) + return ret; + } + + tmio_start_hc(dev); + + spin_lock_irqsave(&tmio->lock, flags); + + misc = tmio_ioread8(tmio->ccr + CCR_MISC); + misc &= ~(1 << 3); /* USSUSP */ + tmio_iowrite8(misc, tmio->ccr + CCR_MISC); + + spin_unlock_irqrestore(&tmio->lock, flags); + + ohci_finish_controller_resume(hcd); + + return 0; +} +#else +#define ohci_hcd_tmio_drv_suspend NULL +#define ohci_hcd_tmio_drv_resume NULL +#endif + +static struct platform_driver ohci_hcd_tmio_driver = { + .probe = ohci_hcd_tmio_drv_probe, + .remove = __devexit_p(ohci_hcd_tmio_drv_remove), + .shutdown = usb_hcd_platform_shutdown, + .suspend = ohci_hcd_tmio_drv_suspend, + .resume = ohci_hcd_tmio_drv_resume, + .driver = { + .name = "tmio-ohci", + .owner = THIS_MODULE, + }, +}; diff --git a/drivers/usb/host/whci/Kbuild b/drivers/usb/host/whci/Kbuild new file mode 100644 index 000000000000..26a3871ea0f9 --- /dev/null +++ b/drivers/usb/host/whci/Kbuild @@ -0,0 +1,11 @@ +obj-$(CONFIG_USB_WHCI_HCD) += whci-hcd.o + +whci-hcd-y := \ + asl.o \ + hcd.o \ + hw.o \ + init.o \ + int.o \ + pzl.o \ + qset.o \ + wusb.o diff --git a/drivers/usb/host/whci/asl.c b/drivers/usb/host/whci/asl.c new file mode 100644 index 000000000000..4d7078e50572 --- /dev/null +++ b/drivers/usb/host/whci/asl.c @@ -0,0 +1,367 @@ +/* + * Wireless Host Controller (WHC) asynchronous schedule management. + * + * Copyright (C) 2007 Cambridge Silicon Radio Ltd. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include <linux/kernel.h> +#include <linux/dma-mapping.h> +#include <linux/uwb/umc.h> +#include <linux/usb.h> +#define D_LOCAL 0 +#include <linux/uwb/debug.h> + +#include "../../wusbcore/wusbhc.h" + +#include "whcd.h" + +#if D_LOCAL >= 4 +static void dump_asl(struct whc *whc, const char *tag) +{ + struct device *dev = &whc->umc->dev; + struct whc_qset *qset; + + d_printf(4, dev, "ASL %s\n", tag); + + list_for_each_entry(qset, &whc->async_list, list_node) { + dump_qset(qset, dev); + } +} +#else +static inline void dump_asl(struct whc *whc, const char *tag) +{ +} +#endif + + +static void qset_get_next_prev(struct whc *whc, struct whc_qset *qset, + struct whc_qset **next, struct whc_qset **prev) +{ + struct list_head *n, *p; + + BUG_ON(list_empty(&whc->async_list)); + + n = qset->list_node.next; + if (n == &whc->async_list) + n = n->next; + p = qset->list_node.prev; + if (p == &whc->async_list) + p = p->prev; + + *next = container_of(n, struct whc_qset, list_node); + *prev = container_of(p, struct whc_qset, list_node); + +} + +static void asl_qset_insert_begin(struct whc *whc, struct whc_qset *qset) +{ + list_move(&qset->list_node, &whc->async_list); + qset->in_sw_list = true; +} + +static void asl_qset_insert(struct whc *whc, struct whc_qset *qset) +{ + struct whc_qset *next, *prev; + + qset_clear(whc, qset); + + /* Link into ASL. */ + qset_get_next_prev(whc, qset, &next, &prev); + whc_qset_set_link_ptr(&qset->qh.link, next->qset_dma); + whc_qset_set_link_ptr(&prev->qh.link, qset->qset_dma); + qset->in_hw_list = true; +} + +static void asl_qset_remove(struct whc *whc, struct whc_qset *qset) +{ + struct whc_qset *prev, *next; + + qset_get_next_prev(whc, qset, &next, &prev); + + list_move(&qset->list_node, &whc->async_removed_list); + qset->in_sw_list = false; + + /* + * No more qsets in the ASL? The caller must stop the ASL as + * it's no longer valid. + */ + if (list_empty(&whc->async_list)) + return; + + /* Remove from ASL. */ + whc_qset_set_link_ptr(&prev->qh.link, next->qset_dma); + qset->in_hw_list = false; +} + +/** + * process_qset - process any recently inactivated or halted qTDs in a + * qset. + * + * After inactive qTDs are removed, new qTDs can be added if the + * urb queue still contains URBs. + * + * Returns any additional WUSBCMD bits for the ASL sync command (i.e., + * WUSBCMD_ASYNC_QSET_RM if a halted qset was removed). + */ +static uint32_t process_qset(struct whc *whc, struct whc_qset *qset) +{ + enum whc_update update = 0; + uint32_t status = 0; + + while (qset->ntds) { + struct whc_qtd *td; + int t; + + t = qset->td_start; + td = &qset->qtd[qset->td_start]; + status = le32_to_cpu(td->status); + + /* + * Nothing to do with a still active qTD. + */ + if (status & QTD_STS_ACTIVE) + break; + + if (status & QTD_STS_HALTED) { + /* Ug, an error. */ + process_halted_qtd(whc, qset, td); + goto done; + } + + /* Mmm, a completed qTD. */ + process_inactive_qtd(whc, qset, td); + } + + update |= qset_add_qtds(whc, qset); + +done: + /* + * Remove this qset from the ASL if requested, but only if has + * no qTDs. + */ + if (qset->remove && qset->ntds == 0) { + asl_qset_remove(whc, qset); + update |= WHC_UPDATE_REMOVED; + } + return update; +} + +void asl_start(struct whc *whc) +{ + struct whc_qset *qset; + + qset = list_first_entry(&whc->async_list, struct whc_qset, list_node); + + le_writeq(qset->qset_dma | QH_LINK_NTDS(8), whc->base + WUSBASYNCLISTADDR); + + whc_write_wusbcmd(whc, WUSBCMD_ASYNC_EN, WUSBCMD_ASYNC_EN); + whci_wait_for(&whc->umc->dev, whc->base + WUSBSTS, + WUSBSTS_ASYNC_SCHED, WUSBSTS_ASYNC_SCHED, + 1000, "start ASL"); +} + +void asl_stop(struct whc *whc) +{ + whc_write_wusbcmd(whc, WUSBCMD_ASYNC_EN, 0); + whci_wait_for(&whc->umc->dev, whc->base + WUSBSTS, + WUSBSTS_ASYNC_SCHED, 0, + 1000, "stop ASL"); +} + +void asl_update(struct whc *whc, uint32_t wusbcmd) +{ + whc_write_wusbcmd(whc, wusbcmd, wusbcmd); + wait_event(whc->async_list_wq, + (le_readl(whc->base + WUSBCMD) & WUSBCMD_ASYNC_UPDATED) == 0); +} + +/** + * scan_async_work - scan the ASL for qsets to process. + * + * Process each qset in the ASL in turn and then signal the WHC that + * the ASL has been updated. + * + * Then start, stop or update the asynchronous schedule as required. + */ +void scan_async_work(struct work_struct *work) +{ + struct whc *whc = container_of(work, struct whc, async_work); + struct whc_qset *qset, *t; + enum whc_update update = 0; + + spin_lock_irq(&whc->lock); + + dump_asl(whc, "before processing"); + + /* + * Transerve the software list backwards so new qsets can be + * safely inserted into the ASL without making it non-circular. + */ + list_for_each_entry_safe_reverse(qset, t, &whc->async_list, list_node) { + if (!qset->in_hw_list) { + asl_qset_insert(whc, qset); + update |= WHC_UPDATE_ADDED; + } + + update |= process_qset(whc, qset); + } + + dump_asl(whc, "after processing"); + + spin_unlock_irq(&whc->lock); + + if (update) { + uint32_t wusbcmd = WUSBCMD_ASYNC_UPDATED | WUSBCMD_ASYNC_SYNCED_DB; + if (update & WHC_UPDATE_REMOVED) + wusbcmd |= WUSBCMD_ASYNC_QSET_RM; + asl_update(whc, wusbcmd); + } + + /* + * Now that the ASL is updated, complete the removal of any + * removed qsets. + */ + spin_lock(&whc->lock); + + list_for_each_entry_safe(qset, t, &whc->async_removed_list, list_node) { + qset_remove_complete(whc, qset); + } + + spin_unlock(&whc->lock); +} + +/** + * asl_urb_enqueue - queue an URB onto the asynchronous list (ASL). + * @whc: the WHCI host controller + * @urb: the URB to enqueue + * @mem_flags: flags for any memory allocations + * + * The qset for the endpoint is obtained and the urb queued on to it. + * + * Work is scheduled to update the hardware's view of the ASL. + */ +int asl_urb_enqueue(struct whc *whc, struct urb *urb, gfp_t mem_flags) +{ + struct whc_qset *qset; + int err; + unsigned long flags; + + spin_lock_irqsave(&whc->lock, flags); + + qset = get_qset(whc, urb, GFP_ATOMIC); + if (qset == NULL) + err = -ENOMEM; + else + err = qset_add_urb(whc, qset, urb, GFP_ATOMIC); + if (!err) { + usb_hcd_link_urb_to_ep(&whc->wusbhc.usb_hcd, urb); + if (!qset->in_sw_list) + asl_qset_insert_begin(whc, qset); + } + + spin_unlock_irqrestore(&whc->lock, flags); + + if (!err) + queue_work(whc->workqueue, &whc->async_work); + + return 0; +} + +/** + * asl_urb_dequeue - remove an URB (qset) from the async list. + * @whc: the WHCI host controller + * @urb: the URB to dequeue + * @status: the current status of the URB + * + * URBs that do yet have qTDs can simply be removed from the software + * queue, otherwise the qset must be removed from the ASL so the qTDs + * can be removed. + */ +int asl_urb_dequeue(struct whc *whc, struct urb *urb, int status) +{ + struct whc_urb *wurb = urb->hcpriv; + struct whc_qset *qset = wurb->qset; + struct whc_std *std, *t; + int ret; + unsigned long flags; + + spin_lock_irqsave(&whc->lock, flags); + + ret = usb_hcd_check_unlink_urb(&whc->wusbhc.usb_hcd, urb, status); + if (ret < 0) + goto out; + + list_for_each_entry_safe(std, t, &qset->stds, list_node) { + if (std->urb == urb) + qset_free_std(whc, std); + else + std->qtd = NULL; /* so this std is re-added when the qset is */ + } + + asl_qset_remove(whc, qset); + wurb->status = status; + wurb->is_async = true; + queue_work(whc->workqueue, &wurb->dequeue_work); + +out: + spin_unlock_irqrestore(&whc->lock, flags); + + return ret; +} + +/** + * asl_qset_delete - delete a qset from the ASL + */ +void asl_qset_delete(struct whc *whc, struct whc_qset *qset) +{ + qset->remove = 1; + queue_work(whc->workqueue, &whc->async_work); + qset_delete(whc, qset); +} + +/** + * asl_init - initialize the asynchronous schedule list + * + * A dummy qset with no qTDs is added to the ASL to simplify removing + * qsets (no need to stop the ASL when the last qset is removed). + */ +int asl_init(struct whc *whc) +{ + struct whc_qset *qset; + + qset = qset_alloc(whc, GFP_KERNEL); + if (qset == NULL) + return -ENOMEM; + + asl_qset_insert_begin(whc, qset); + asl_qset_insert(whc, qset); + + return 0; +} + +/** + * asl_clean_up - free ASL resources + * + * The ASL is stopped and empty except for the dummy qset. + */ +void asl_clean_up(struct whc *whc) +{ + struct whc_qset *qset; + + if (!list_empty(&whc->async_list)) { + qset = list_first_entry(&whc->async_list, struct whc_qset, list_node); + list_del(&qset->list_node); + qset_free(whc, qset); + } +} diff --git a/drivers/usb/host/whci/hcd.c b/drivers/usb/host/whci/hcd.c new file mode 100644 index 000000000000..ef3ad4dca945 --- /dev/null +++ b/drivers/usb/host/whci/hcd.c @@ -0,0 +1,339 @@ +/* + * Wireless Host Controller (WHC) driver. + * + * Copyright (C) 2007 Cambridge Silicon Radio Ltd. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include <linux/version.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/uwb/umc.h> + +#include "../../wusbcore/wusbhc.h" + +#include "whcd.h" + +/* + * One time initialization. + * + * Nothing to do here. + */ +static int whc_reset(struct usb_hcd *usb_hcd) +{ + return 0; +} + +/* + * Start the wireless host controller. + * + * Start device notification. + * + * Put hc into run state, set DNTS parameters. + */ +static int whc_start(struct usb_hcd *usb_hcd) +{ + struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd); + struct whc *whc = wusbhc_to_whc(wusbhc); + u8 bcid; + int ret; + + mutex_lock(&wusbhc->mutex); + + le_writel(WUSBINTR_GEN_CMD_DONE + | WUSBINTR_HOST_ERR + | WUSBINTR_ASYNC_SCHED_SYNCED + | WUSBINTR_DNTS_INT + | WUSBINTR_ERR_INT + | WUSBINTR_INT, + whc->base + WUSBINTR); + + /* set cluster ID */ + bcid = wusb_cluster_id_get(); + ret = whc_set_cluster_id(whc, bcid); + if (ret < 0) + goto out; + wusbhc->cluster_id = bcid; + + /* start HC */ + whc_write_wusbcmd(whc, WUSBCMD_RUN, WUSBCMD_RUN); + + usb_hcd->uses_new_polling = 1; + usb_hcd->poll_rh = 1; + usb_hcd->state = HC_STATE_RUNNING; + +out: + mutex_unlock(&wusbhc->mutex); + return ret; +} + + +/* + * Stop the wireless host controller. + * + * Stop device notification. + * + * Wait for pending transfer to stop? Put hc into stop state? + */ +static void whc_stop(struct usb_hcd *usb_hcd) +{ + struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd); + struct whc *whc = wusbhc_to_whc(wusbhc); + + mutex_lock(&wusbhc->mutex); + + wusbhc_stop(wusbhc); + + /* stop HC */ + le_writel(0, whc->base + WUSBINTR); + whc_write_wusbcmd(whc, WUSBCMD_RUN, 0); + whci_wait_for(&whc->umc->dev, whc->base + WUSBSTS, + WUSBSTS_HCHALTED, WUSBSTS_HCHALTED, + 100, "HC to halt"); + + wusb_cluster_id_put(wusbhc->cluster_id); + + mutex_unlock(&wusbhc->mutex); +} + +static int whc_get_frame_number(struct usb_hcd *usb_hcd) +{ + /* Frame numbers are not applicable to WUSB. */ + return -ENOSYS; +} + + +/* + * Queue an URB to the ASL or PZL + */ +static int whc_urb_enqueue(struct usb_hcd *usb_hcd, struct urb *urb, + gfp_t mem_flags) +{ + struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd); + struct whc *whc = wusbhc_to_whc(wusbhc); + int ret; + + switch (usb_pipetype(urb->pipe)) { + case PIPE_INTERRUPT: + ret = pzl_urb_enqueue(whc, urb, mem_flags); + break; + case PIPE_ISOCHRONOUS: + dev_err(&whc->umc->dev, "isochronous transfers unsupported\n"); + ret = -ENOTSUPP; + break; + case PIPE_CONTROL: + case PIPE_BULK: + default: + ret = asl_urb_enqueue(whc, urb, mem_flags); + break; + }; + + return ret; +} + +/* + * Remove a queued URB from the ASL or PZL. + */ +static int whc_urb_dequeue(struct usb_hcd *usb_hcd, struct urb *urb, int status) +{ + struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd); + struct whc *whc = wusbhc_to_whc(wusbhc); + int ret; + + switch (usb_pipetype(urb->pipe)) { + case PIPE_INTERRUPT: + ret = pzl_urb_dequeue(whc, urb, status); + break; + case PIPE_ISOCHRONOUS: + ret = -ENOTSUPP; + break; + case PIPE_CONTROL: + case PIPE_BULK: + default: + ret = asl_urb_dequeue(whc, urb, status); + break; + }; + + return ret; +} + +/* + * Wait for all URBs to the endpoint to be completed, then delete the + * qset. + */ +static void whc_endpoint_disable(struct usb_hcd *usb_hcd, + struct usb_host_endpoint *ep) +{ + struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd); + struct whc *whc = wusbhc_to_whc(wusbhc); + struct whc_qset *qset; + + qset = ep->hcpriv; + if (qset) { + ep->hcpriv = NULL; + if (usb_endpoint_xfer_bulk(&ep->desc) + || usb_endpoint_xfer_control(&ep->desc)) + asl_qset_delete(whc, qset); + else + pzl_qset_delete(whc, qset); + } +} + +static struct hc_driver whc_hc_driver = { + .description = "whci-hcd", + .product_desc = "Wireless host controller", + .hcd_priv_size = sizeof(struct whc) - sizeof(struct usb_hcd), + .irq = whc_int_handler, + .flags = HCD_USB2, + + .reset = whc_reset, + .start = whc_start, + .stop = whc_stop, + .get_frame_number = whc_get_frame_number, + .urb_enqueue = whc_urb_enqueue, + .urb_dequeue = whc_urb_dequeue, + .endpoint_disable = whc_endpoint_disable, + + .hub_status_data = wusbhc_rh_status_data, + .hub_control = wusbhc_rh_control, + .bus_suspend = wusbhc_rh_suspend, + .bus_resume = wusbhc_rh_resume, + .start_port_reset = wusbhc_rh_start_port_reset, +}; + +static int whc_probe(struct umc_dev *umc) +{ + int ret = -ENOMEM; + struct usb_hcd *usb_hcd; + struct wusbhc *wusbhc = NULL; + struct whc *whc = NULL; + struct device *dev = &umc->dev; + + usb_hcd = usb_create_hcd(&whc_hc_driver, dev, "whci"); + if (usb_hcd == NULL) { + dev_err(dev, "unable to create hcd\n"); + goto error; + } + + usb_hcd->wireless = 1; + + wusbhc = usb_hcd_to_wusbhc(usb_hcd); + whc = wusbhc_to_whc(wusbhc); + whc->umc = umc; + + ret = whc_init(whc); + if (ret) + goto error; + + wusbhc->dev = dev; + wusbhc->uwb_rc = uwb_rc_get_by_grandpa(umc->dev.parent); + if (!wusbhc->uwb_rc) { + ret = -ENODEV; + dev_err(dev, "cannot get radio controller\n"); + goto error; + } + + if (whc->n_devices > USB_MAXCHILDREN) { + dev_warn(dev, "USB_MAXCHILDREN too low for WUSB adapter (%u ports)\n", + whc->n_devices); + wusbhc->ports_max = USB_MAXCHILDREN; + } else + wusbhc->ports_max = whc->n_devices; + wusbhc->mmcies_max = whc->n_mmc_ies; + wusbhc->start = whc_wusbhc_start; + wusbhc->stop = whc_wusbhc_stop; + wusbhc->mmcie_add = whc_mmcie_add; + wusbhc->mmcie_rm = whc_mmcie_rm; + wusbhc->dev_info_set = whc_dev_info_set; + wusbhc->bwa_set = whc_bwa_set; + wusbhc->set_num_dnts = whc_set_num_dnts; + wusbhc->set_ptk = whc_set_ptk; + wusbhc->set_gtk = whc_set_gtk; + + ret = wusbhc_create(wusbhc); + if (ret) + goto error_wusbhc_create; + + ret = usb_add_hcd(usb_hcd, whc->umc->irq, IRQF_SHARED); + if (ret) { + dev_err(dev, "cannot add HCD: %d\n", ret); + goto error_usb_add_hcd; + } + + ret = wusbhc_b_create(wusbhc); + if (ret) { + dev_err(dev, "WUSBHC phase B setup failed: %d\n", ret); + goto error_wusbhc_b_create; + } + + return 0; + +error_wusbhc_b_create: + usb_remove_hcd(usb_hcd); +error_usb_add_hcd: + wusbhc_destroy(wusbhc); +error_wusbhc_create: + uwb_rc_put(wusbhc->uwb_rc); +error: + whc_clean_up(whc); + if (usb_hcd) + usb_put_hcd(usb_hcd); + return ret; +} + + +static void whc_remove(struct umc_dev *umc) +{ + struct usb_hcd *usb_hcd = dev_get_drvdata(&umc->dev); + struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd); + struct whc *whc = wusbhc_to_whc(wusbhc); + + if (usb_hcd) { + wusbhc_b_destroy(wusbhc); + usb_remove_hcd(usb_hcd); + wusbhc_destroy(wusbhc); + uwb_rc_put(wusbhc->uwb_rc); + whc_clean_up(whc); + usb_put_hcd(usb_hcd); + } +} + +static struct umc_driver whci_hc_driver = { + .name = "whci-hcd", + .cap_id = UMC_CAP_ID_WHCI_WUSB_HC, + .probe = whc_probe, + .remove = whc_remove, +}; + +static int __init whci_hc_driver_init(void) +{ + return umc_driver_register(&whci_hc_driver); +} +module_init(whci_hc_driver_init); + +static void __exit whci_hc_driver_exit(void) +{ + umc_driver_unregister(&whci_hc_driver); +} +module_exit(whci_hc_driver_exit); + +/* PCI device ID's that we handle (so it gets loaded) */ +static struct pci_device_id whci_hcd_id_table[] = { + { PCI_DEVICE_CLASS(PCI_CLASS_WIRELESS_WHCI, ~0) }, + { /* empty last entry */ } +}; +MODULE_DEVICE_TABLE(pci, whci_hcd_id_table); + +MODULE_DESCRIPTION("WHCI Wireless USB host controller driver"); +MODULE_AUTHOR("Cambridge Silicon Radio Ltd."); +MODULE_LICENSE("GPL"); diff --git a/drivers/usb/host/whci/hw.c b/drivers/usb/host/whci/hw.c new file mode 100644 index 000000000000..ac86e59c1225 --- /dev/null +++ b/drivers/usb/host/whci/hw.c @@ -0,0 +1,87 @@ +/* + * Wireless Host Controller (WHC) hardware access helpers. + * + * Copyright (C) 2007 Cambridge Silicon Radio Ltd. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include <linux/kernel.h> +#include <linux/dma-mapping.h> +#include <linux/uwb/umc.h> + +#include "../../wusbcore/wusbhc.h" + +#include "whcd.h" + +void whc_write_wusbcmd(struct whc *whc, u32 mask, u32 val) +{ + unsigned long flags; + u32 cmd; + + spin_lock_irqsave(&whc->lock, flags); + + cmd = le_readl(whc->base + WUSBCMD); + cmd = (cmd & ~mask) | val; + le_writel(cmd, whc->base + WUSBCMD); + + spin_unlock_irqrestore(&whc->lock, flags); +} + +/** + * whc_do_gencmd - start a generic command via the WUSBGENCMDSTS register + * @whc: the WHCI HC + * @cmd: command to start. + * @params: parameters for the command (the WUSBGENCMDPARAMS register value). + * @addr: pointer to any data for the command (may be NULL). + * @len: length of the data (if any). + */ +int whc_do_gencmd(struct whc *whc, u32 cmd, u32 params, void *addr, size_t len) +{ + unsigned long flags; + dma_addr_t dma_addr; + int t; + + mutex_lock(&whc->mutex); + + /* Wait for previous command to complete. */ + t = wait_event_timeout(whc->cmd_wq, + (le_readl(whc->base + WUSBGENCMDSTS) & WUSBGENCMDSTS_ACTIVE) == 0, + WHC_GENCMD_TIMEOUT_MS); + if (t == 0) { + dev_err(&whc->umc->dev, "generic command timeout (%04x/%04x)\n", + le_readl(whc->base + WUSBGENCMDSTS), + le_readl(whc->base + WUSBGENCMDPARAMS)); + return -ETIMEDOUT; + } + + if (addr) { + memcpy(whc->gen_cmd_buf, addr, len); + dma_addr = whc->gen_cmd_buf_dma; + } else + dma_addr = 0; + + /* Poke registers to start cmd. */ + spin_lock_irqsave(&whc->lock, flags); + + le_writel(params, whc->base + WUSBGENCMDPARAMS); + le_writeq(dma_addr, whc->base + WUSBGENADDR); + + le_writel(WUSBGENCMDSTS_ACTIVE | WUSBGENCMDSTS_IOC | cmd, + whc->base + WUSBGENCMDSTS); + + spin_unlock_irqrestore(&whc->lock, flags); + + mutex_unlock(&whc->mutex); + + return 0; +} diff --git a/drivers/usb/host/whci/init.c b/drivers/usb/host/whci/init.c new file mode 100644 index 000000000000..34a783cb0133 --- /dev/null +++ b/drivers/usb/host/whci/init.c @@ -0,0 +1,188 @@ +/* + * Wireless Host Controller (WHC) initialization. + * + * Copyright (C) 2007 Cambridge Silicon Radio Ltd. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include <linux/kernel.h> +#include <linux/dma-mapping.h> +#include <linux/uwb/umc.h> + +#include "../../wusbcore/wusbhc.h" + +#include "whcd.h" + +/* + * Reset the host controller. + */ +static void whc_hw_reset(struct whc *whc) +{ + le_writel(WUSBCMD_WHCRESET, whc->base + WUSBCMD); + whci_wait_for(&whc->umc->dev, whc->base + WUSBCMD, WUSBCMD_WHCRESET, 0, + 100, "reset"); +} + +static void whc_hw_init_di_buf(struct whc *whc) +{ + int d; + + /* Disable all entries in the Device Information buffer. */ + for (d = 0; d < whc->n_devices; d++) + whc->di_buf[d].addr_sec_info = WHC_DI_DISABLE; + + le_writeq(whc->di_buf_dma, whc->base + WUSBDEVICEINFOADDR); +} + +static void whc_hw_init_dn_buf(struct whc *whc) +{ + /* Clear the Device Notification buffer to ensure the V (valid) + * bits are clear. */ + memset(whc->dn_buf, 0, 4096); + + le_writeq(whc->dn_buf_dma, whc->base + WUSBDNTSBUFADDR); +} + +int whc_init(struct whc *whc) +{ + u32 whcsparams; + int ret, i; + resource_size_t start, len; + + spin_lock_init(&whc->lock); + mutex_init(&whc->mutex); + init_waitqueue_head(&whc->cmd_wq); + init_waitqueue_head(&whc->async_list_wq); + init_waitqueue_head(&whc->periodic_list_wq); + whc->workqueue = create_singlethread_workqueue(dev_name(&whc->umc->dev)); + if (whc->workqueue == NULL) { + ret = -ENOMEM; + goto error; + } + INIT_WORK(&whc->dn_work, whc_dn_work); + + INIT_WORK(&whc->async_work, scan_async_work); + INIT_LIST_HEAD(&whc->async_list); + INIT_LIST_HEAD(&whc->async_removed_list); + + INIT_WORK(&whc->periodic_work, scan_periodic_work); + for (i = 0; i < 5; i++) + INIT_LIST_HEAD(&whc->periodic_list[i]); + INIT_LIST_HEAD(&whc->periodic_removed_list); + + /* Map HC registers. */ + start = whc->umc->resource.start; + len = whc->umc->resource.end - start + 1; + if (!request_mem_region(start, len, "whci-hc")) { + dev_err(&whc->umc->dev, "can't request HC region\n"); + ret = -EBUSY; + goto error; + } + whc->base_phys = start; + whc->base = ioremap(start, len); + if (!whc->base) { + dev_err(&whc->umc->dev, "ioremap\n"); + ret = -ENOMEM; + goto error; + } + + whc_hw_reset(whc); + + /* Read maximum number of devices, keys and MMC IEs. */ + whcsparams = le_readl(whc->base + WHCSPARAMS); + whc->n_devices = WHCSPARAMS_TO_N_DEVICES(whcsparams); + whc->n_keys = WHCSPARAMS_TO_N_KEYS(whcsparams); + whc->n_mmc_ies = WHCSPARAMS_TO_N_MMC_IES(whcsparams); + + dev_dbg(&whc->umc->dev, "N_DEVICES = %d, N_KEYS = %d, N_MMC_IES = %d\n", + whc->n_devices, whc->n_keys, whc->n_mmc_ies); + + whc->qset_pool = dma_pool_create("qset", &whc->umc->dev, + sizeof(struct whc_qset), 64, 0); + if (whc->qset_pool == NULL) { + ret = -ENOMEM; + goto error; + } + + ret = asl_init(whc); + if (ret < 0) + goto error; + ret = pzl_init(whc); + if (ret < 0) + goto error; + + /* Allocate and initialize a buffer for generic commands, the + Device Information buffer, and the Device Notification + buffer. */ + + whc->gen_cmd_buf = dma_alloc_coherent(&whc->umc->dev, WHC_GEN_CMD_DATA_LEN, + &whc->gen_cmd_buf_dma, GFP_KERNEL); + if (whc->gen_cmd_buf == NULL) { + ret = -ENOMEM; + goto error; + } + + whc->dn_buf = dma_alloc_coherent(&whc->umc->dev, + sizeof(struct dn_buf_entry) * WHC_N_DN_ENTRIES, + &whc->dn_buf_dma, GFP_KERNEL); + if (!whc->dn_buf) { + ret = -ENOMEM; + goto error; + } + whc_hw_init_dn_buf(whc); + + whc->di_buf = dma_alloc_coherent(&whc->umc->dev, + sizeof(struct di_buf_entry) * whc->n_devices, + &whc->di_buf_dma, GFP_KERNEL); + if (!whc->di_buf) { + ret = -ENOMEM; + goto error; + } + whc_hw_init_di_buf(whc); + + return 0; + +error: + whc_clean_up(whc); + return ret; +} + +void whc_clean_up(struct whc *whc) +{ + resource_size_t len; + + if (whc->di_buf) + dma_free_coherent(&whc->umc->dev, sizeof(struct di_buf_entry) * whc->n_devices, + whc->di_buf, whc->di_buf_dma); + if (whc->dn_buf) + dma_free_coherent(&whc->umc->dev, sizeof(struct dn_buf_entry) * WHC_N_DN_ENTRIES, + whc->dn_buf, whc->dn_buf_dma); + if (whc->gen_cmd_buf) + dma_free_coherent(&whc->umc->dev, WHC_GEN_CMD_DATA_LEN, + whc->gen_cmd_buf, whc->gen_cmd_buf_dma); + + pzl_clean_up(whc); + asl_clean_up(whc); + + if (whc->qset_pool) + dma_pool_destroy(whc->qset_pool); + + len = whc->umc->resource.end - whc->umc->resource.start + 1; + if (whc->base) + iounmap(whc->base); + if (whc->base_phys) + release_mem_region(whc->base_phys, len); + + if (whc->workqueue) + destroy_workqueue(whc->workqueue); +} diff --git a/drivers/usb/host/whci/int.c b/drivers/usb/host/whci/int.c new file mode 100644 index 000000000000..fce01174aa9b --- /dev/null +++ b/drivers/usb/host/whci/int.c @@ -0,0 +1,95 @@ +/* + * Wireless Host Controller (WHC) interrupt handling. + * + * Copyright (C) 2007 Cambridge Silicon Radio Ltd. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include <linux/version.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/uwb/umc.h> + +#include "../../wusbcore/wusbhc.h" + +#include "whcd.h" + +static void transfer_done(struct whc *whc) +{ + queue_work(whc->workqueue, &whc->async_work); + queue_work(whc->workqueue, &whc->periodic_work); +} + +irqreturn_t whc_int_handler(struct usb_hcd *hcd) +{ + struct wusbhc *wusbhc = usb_hcd_to_wusbhc(hcd); + struct whc *whc = wusbhc_to_whc(wusbhc); + u32 sts; + + sts = le_readl(whc->base + WUSBSTS); + if (!(sts & WUSBSTS_INT_MASK)) + return IRQ_NONE; + le_writel(sts & WUSBSTS_INT_MASK, whc->base + WUSBSTS); + + if (sts & WUSBSTS_GEN_CMD_DONE) + wake_up(&whc->cmd_wq); + + if (sts & WUSBSTS_HOST_ERR) + dev_err(&whc->umc->dev, "FIXME: host system error\n"); + + if (sts & WUSBSTS_ASYNC_SCHED_SYNCED) + wake_up(&whc->async_list_wq); + + if (sts & WUSBSTS_PERIODIC_SCHED_SYNCED) + wake_up(&whc->periodic_list_wq); + + if (sts & WUSBSTS_DNTS_INT) + queue_work(whc->workqueue, &whc->dn_work); + + /* + * A transfer completed (see [WHCI] section 4.7.1.2 for when + * this occurs). + */ + if (sts & (WUSBSTS_INT | WUSBSTS_ERR_INT)) + transfer_done(whc); + + return IRQ_HANDLED; +} + +static int process_dn_buf(struct whc *whc) +{ + struct wusbhc *wusbhc = &whc->wusbhc; + struct dn_buf_entry *dn; + int processed = 0; + + for (dn = whc->dn_buf; dn < whc->dn_buf + WHC_N_DN_ENTRIES; dn++) { + if (dn->status & WHC_DN_STATUS_VALID) { + wusbhc_handle_dn(wusbhc, dn->src_addr, + (struct wusb_dn_hdr *)dn->dn_data, + dn->msg_size); + dn->status &= ~WHC_DN_STATUS_VALID; + processed++; + } + } + return processed; +} + +void whc_dn_work(struct work_struct *work) +{ + struct whc *whc = container_of(work, struct whc, dn_work); + int processed; + + do { + processed = process_dn_buf(whc); + } while (processed); +} diff --git a/drivers/usb/host/whci/pzl.c b/drivers/usb/host/whci/pzl.c new file mode 100644 index 000000000000..8d62df0c330b --- /dev/null +++ b/drivers/usb/host/whci/pzl.c @@ -0,0 +1,398 @@ +/* + * Wireless Host Controller (WHC) periodic schedule management. + * + * Copyright (C) 2007 Cambridge Silicon Radio Ltd. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include <linux/kernel.h> +#include <linux/dma-mapping.h> +#include <linux/uwb/umc.h> +#include <linux/usb.h> +#define D_LOCAL 0 +#include <linux/uwb/debug.h> + +#include "../../wusbcore/wusbhc.h" + +#include "whcd.h" + +#if D_LOCAL >= 4 +static void dump_pzl(struct whc *whc, const char *tag) +{ + struct device *dev = &whc->umc->dev; + struct whc_qset *qset; + int period = 0; + + d_printf(4, dev, "PZL %s\n", tag); + + for (period = 0; period < 5; period++) { + d_printf(4, dev, "Period %d\n", period); + list_for_each_entry(qset, &whc->periodic_list[period], list_node) { + dump_qset(qset, dev); + } + } +} +#else +static inline void dump_pzl(struct whc *whc, const char *tag) +{ +} +#endif + +static void update_pzl_pointers(struct whc *whc, int period, u64 addr) +{ + switch (period) { + case 0: + whc_qset_set_link_ptr(&whc->pz_list[0], addr); + whc_qset_set_link_ptr(&whc->pz_list[2], addr); + whc_qset_set_link_ptr(&whc->pz_list[4], addr); + whc_qset_set_link_ptr(&whc->pz_list[6], addr); + whc_qset_set_link_ptr(&whc->pz_list[8], addr); + whc_qset_set_link_ptr(&whc->pz_list[10], addr); + whc_qset_set_link_ptr(&whc->pz_list[12], addr); + whc_qset_set_link_ptr(&whc->pz_list[14], addr); + break; + case 1: + whc_qset_set_link_ptr(&whc->pz_list[1], addr); + whc_qset_set_link_ptr(&whc->pz_list[5], addr); + whc_qset_set_link_ptr(&whc->pz_list[9], addr); + whc_qset_set_link_ptr(&whc->pz_list[13], addr); + break; + case 2: + whc_qset_set_link_ptr(&whc->pz_list[3], addr); + whc_qset_set_link_ptr(&whc->pz_list[11], addr); + break; + case 3: + whc_qset_set_link_ptr(&whc->pz_list[7], addr); + break; + case 4: + whc_qset_set_link_ptr(&whc->pz_list[15], addr); + break; + } +} + +/* + * Return the 'period' to use for this qset. The minimum interval for + * the endpoint is used so whatever urbs are submitted the device is + * polled often enough. + */ +static int qset_get_period(struct whc *whc, struct whc_qset *qset) +{ + uint8_t bInterval = qset->ep->desc.bInterval; + + if (bInterval < 6) + bInterval = 6; + if (bInterval > 10) + bInterval = 10; + return bInterval - 6; +} + +static void qset_insert_in_sw_list(struct whc *whc, struct whc_qset *qset) +{ + int period; + + period = qset_get_period(whc, qset); + + qset_clear(whc, qset); + list_move(&qset->list_node, &whc->periodic_list[period]); + qset->in_sw_list = true; +} + +static void pzl_qset_remove(struct whc *whc, struct whc_qset *qset) +{ + list_move(&qset->list_node, &whc->periodic_removed_list); + qset->in_hw_list = false; + qset->in_sw_list = false; +} + +/** + * pzl_process_qset - process any recently inactivated or halted qTDs + * in a qset. + * + * After inactive qTDs are removed, new qTDs can be added if the + * urb queue still contains URBs. + * + * Returns the schedule updates required. + */ +static enum whc_update pzl_process_qset(struct whc *whc, struct whc_qset *qset) +{ + enum whc_update update = 0; + uint32_t status = 0; + + while (qset->ntds) { + struct whc_qtd *td; + int t; + + t = qset->td_start; + td = &qset->qtd[qset->td_start]; + status = le32_to_cpu(td->status); + + /* + * Nothing to do with a still active qTD. + */ + if (status & QTD_STS_ACTIVE) + break; + + if (status & QTD_STS_HALTED) { + /* Ug, an error. */ + process_halted_qtd(whc, qset, td); + goto done; + } + + /* Mmm, a completed qTD. */ + process_inactive_qtd(whc, qset, td); + } + + update |= qset_add_qtds(whc, qset); + +done: + /* + * If there are no qTDs in this qset, remove it from the PZL. + */ + if (qset->remove && qset->ntds == 0) { + pzl_qset_remove(whc, qset); + update |= WHC_UPDATE_REMOVED; + } + + return update; +} + +/** + * pzl_start - start the periodic schedule + * @whc: the WHCI host controller + * + * The PZL must be valid (e.g., all entries in the list should have + * the T bit set). + */ +void pzl_start(struct whc *whc) +{ + le_writeq(whc->pz_list_dma, whc->base + WUSBPERIODICLISTBASE); + + whc_write_wusbcmd(whc, WUSBCMD_PERIODIC_EN, WUSBCMD_PERIODIC_EN); + whci_wait_for(&whc->umc->dev, whc->base + WUSBSTS, + WUSBSTS_PERIODIC_SCHED, WUSBSTS_PERIODIC_SCHED, + 1000, "start PZL"); +} + +/** + * pzl_stop - stop the periodic schedule + * @whc: the WHCI host controller + */ +void pzl_stop(struct whc *whc) +{ + whc_write_wusbcmd(whc, WUSBCMD_PERIODIC_EN, 0); + whci_wait_for(&whc->umc->dev, whc->base + WUSBSTS, + WUSBSTS_PERIODIC_SCHED, 0, + 1000, "stop PZL"); +} + +void pzl_update(struct whc *whc, uint32_t wusbcmd) +{ + whc_write_wusbcmd(whc, wusbcmd, wusbcmd); + wait_event(whc->periodic_list_wq, + (le_readl(whc->base + WUSBCMD) & WUSBCMD_PERIODIC_UPDATED) == 0); +} + +static void update_pzl_hw_view(struct whc *whc) +{ + struct whc_qset *qset, *t; + int period; + u64 tmp_qh = 0; + + for (period = 0; period < 5; period++) { + list_for_each_entry_safe(qset, t, &whc->periodic_list[period], list_node) { + whc_qset_set_link_ptr(&qset->qh.link, tmp_qh); + tmp_qh = qset->qset_dma; + qset->in_hw_list = true; + } + update_pzl_pointers(whc, period, tmp_qh); + } +} + +/** + * scan_periodic_work - scan the PZL for qsets to process. + * + * Process each qset in the PZL in turn and then signal the WHC that + * the PZL has been updated. + * + * Then start, stop or update the periodic schedule as required. + */ +void scan_periodic_work(struct work_struct *work) +{ + struct whc *whc = container_of(work, struct whc, periodic_work); + struct whc_qset *qset, *t; + enum whc_update update = 0; + int period; + + spin_lock_irq(&whc->lock); + + dump_pzl(whc, "before processing"); + + for (period = 4; period >= 0; period--) { + list_for_each_entry_safe(qset, t, &whc->periodic_list[period], list_node) { + if (!qset->in_hw_list) + update |= WHC_UPDATE_ADDED; + update |= pzl_process_qset(whc, qset); + } + } + + if (update & (WHC_UPDATE_ADDED | WHC_UPDATE_REMOVED)) + update_pzl_hw_view(whc); + + dump_pzl(whc, "after processing"); + + spin_unlock_irq(&whc->lock); + + if (update) { + uint32_t wusbcmd = WUSBCMD_PERIODIC_UPDATED | WUSBCMD_PERIODIC_SYNCED_DB; + if (update & WHC_UPDATE_REMOVED) + wusbcmd |= WUSBCMD_PERIODIC_QSET_RM; + pzl_update(whc, wusbcmd); + } + + /* + * Now that the PZL is updated, complete the removal of any + * removed qsets. + */ + spin_lock(&whc->lock); + + list_for_each_entry_safe(qset, t, &whc->periodic_removed_list, list_node) { + qset_remove_complete(whc, qset); + } + + spin_unlock(&whc->lock); +} + +/** + * pzl_urb_enqueue - queue an URB onto the periodic list (PZL) + * @whc: the WHCI host controller + * @urb: the URB to enqueue + * @mem_flags: flags for any memory allocations + * + * The qset for the endpoint is obtained and the urb queued on to it. + * + * Work is scheduled to update the hardware's view of the PZL. + */ +int pzl_urb_enqueue(struct whc *whc, struct urb *urb, gfp_t mem_flags) +{ + struct whc_qset *qset; + int err; + unsigned long flags; + + spin_lock_irqsave(&whc->lock, flags); + + qset = get_qset(whc, urb, GFP_ATOMIC); + if (qset == NULL) + err = -ENOMEM; + else + err = qset_add_urb(whc, qset, urb, GFP_ATOMIC); + if (!err) { + usb_hcd_link_urb_to_ep(&whc->wusbhc.usb_hcd, urb); + if (!qset->in_sw_list) + qset_insert_in_sw_list(whc, qset); + } + + spin_unlock_irqrestore(&whc->lock, flags); + + if (!err) + queue_work(whc->workqueue, &whc->periodic_work); + + return 0; +} + +/** + * pzl_urb_dequeue - remove an URB (qset) from the periodic list + * @whc: the WHCI host controller + * @urb: the URB to dequeue + * @status: the current status of the URB + * + * URBs that do yet have qTDs can simply be removed from the software + * queue, otherwise the qset must be removed so the qTDs can be safely + * removed. + */ +int pzl_urb_dequeue(struct whc *whc, struct urb *urb, int status) +{ + struct whc_urb *wurb = urb->hcpriv; + struct whc_qset *qset = wurb->qset; + struct whc_std *std, *t; + int ret; + unsigned long flags; + + spin_lock_irqsave(&whc->lock, flags); + + ret = usb_hcd_check_unlink_urb(&whc->wusbhc.usb_hcd, urb, status); + if (ret < 0) + goto out; + + list_for_each_entry_safe(std, t, &qset->stds, list_node) { + if (std->urb == urb) + qset_free_std(whc, std); + else + std->qtd = NULL; /* so this std is re-added when the qset is */ + } + + pzl_qset_remove(whc, qset); + wurb->status = status; + wurb->is_async = false; + queue_work(whc->workqueue, &wurb->dequeue_work); + +out: + spin_unlock_irqrestore(&whc->lock, flags); + + return ret; +} + +/** + * pzl_qset_delete - delete a qset from the PZL + */ +void pzl_qset_delete(struct whc *whc, struct whc_qset *qset) +{ + qset->remove = 1; + queue_work(whc->workqueue, &whc->periodic_work); + qset_delete(whc, qset); +} + + +/** + * pzl_init - initialize the periodic zone list + * @whc: the WHCI host controller + */ +int pzl_init(struct whc *whc) +{ + int i; + + whc->pz_list = dma_alloc_coherent(&whc->umc->dev, sizeof(u64) * 16, + &whc->pz_list_dma, GFP_KERNEL); + if (whc->pz_list == NULL) + return -ENOMEM; + + /* Set T bit on all elements in PZL. */ + for (i = 0; i < 16; i++) + whc->pz_list[i] = cpu_to_le64(QH_LINK_NTDS(8) | QH_LINK_T); + + le_writeq(whc->pz_list_dma, whc->base + WUSBPERIODICLISTBASE); + + return 0; +} + +/** + * pzl_clean_up - free PZL resources + * @whc: the WHCI host controller + * + * The PZL is stopped and empty. + */ +void pzl_clean_up(struct whc *whc) +{ + if (whc->pz_list) + dma_free_coherent(&whc->umc->dev, sizeof(u64) * 16, whc->pz_list, + whc->pz_list_dma); +} diff --git a/drivers/usb/host/whci/qset.c b/drivers/usb/host/whci/qset.c new file mode 100644 index 000000000000..0420037d2e18 --- /dev/null +++ b/drivers/usb/host/whci/qset.c @@ -0,0 +1,567 @@ +/* + * Wireless Host Controller (WHC) qset management. + * + * Copyright (C) 2007 Cambridge Silicon Radio Ltd. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include <linux/kernel.h> +#include <linux/dma-mapping.h> +#include <linux/uwb/umc.h> +#include <linux/usb.h> + +#include "../../wusbcore/wusbhc.h" + +#include "whcd.h" + +void dump_qset(struct whc_qset *qset, struct device *dev) +{ + struct whc_std *std; + struct urb *urb = NULL; + int i; + + dev_dbg(dev, "qset %08x\n", (u32)qset->qset_dma); + dev_dbg(dev, " -> %08x\n", (u32)qset->qh.link); + dev_dbg(dev, " info: %08x %08x %08x\n", + qset->qh.info1, qset->qh.info2, qset->qh.info3); + dev_dbg(dev, " sts: %04x errs: %d\n", qset->qh.status, qset->qh.err_count); + dev_dbg(dev, " TD: sts: %08x opts: %08x\n", + qset->qh.overlay.qtd.status, qset->qh.overlay.qtd.options); + + for (i = 0; i < WHCI_QSET_TD_MAX; i++) { + dev_dbg(dev, " %c%c TD[%d]: sts: %08x opts: %08x ptr: %08x\n", + i == qset->td_start ? 'S' : ' ', + i == qset->td_end ? 'E' : ' ', + i, qset->qtd[i].status, qset->qtd[i].options, + (u32)qset->qtd[i].page_list_ptr); + } + dev_dbg(dev, " ntds: %d\n", qset->ntds); + list_for_each_entry(std, &qset->stds, list_node) { + if (urb != std->urb) { + urb = std->urb; + dev_dbg(dev, " urb %p transferred: %d bytes\n", urb, + urb->actual_length); + } + if (std->qtd) + dev_dbg(dev, " sTD[%td]: %zu bytes @ %08x\n", + std->qtd - &qset->qtd[0], + std->len, std->num_pointers ? + (u32)(std->pl_virt[0].buf_ptr) : (u32)std->dma_addr); + else + dev_dbg(dev, " sTD[-]: %zd bytes @ %08x\n", + std->len, std->num_pointers ? + (u32)(std->pl_virt[0].buf_ptr) : (u32)std->dma_addr); + } +} + +struct whc_qset *qset_alloc(struct whc *whc, gfp_t mem_flags) +{ + struct whc_qset *qset; + dma_addr_t dma; + + qset = dma_pool_alloc(whc->qset_pool, mem_flags, &dma); + if (qset == NULL) + return NULL; + memset(qset, 0, sizeof(struct whc_qset)); + + qset->qset_dma = dma; + qset->whc = whc; + + INIT_LIST_HEAD(&qset->list_node); + INIT_LIST_HEAD(&qset->stds); + + return qset; +} + +/** + * qset_fill_qh - fill the static endpoint state in a qset's QHead + * @qset: the qset whose QH needs initializing with static endpoint + * state + * @urb: an urb for a transfer to this endpoint + */ +static void qset_fill_qh(struct whc_qset *qset, struct urb *urb) +{ + struct usb_device *usb_dev = urb->dev; + struct usb_wireless_ep_comp_descriptor *epcd; + bool is_out; + + is_out = usb_pipeout(urb->pipe); + + epcd = (struct usb_wireless_ep_comp_descriptor *)qset->ep->extra; + + if (epcd) { + qset->max_seq = epcd->bMaxSequence; + qset->max_burst = epcd->bMaxBurst; + } else { + qset->max_seq = 2; + qset->max_burst = 1; + } + + qset->qh.info1 = cpu_to_le32( + QH_INFO1_EP(usb_pipeendpoint(urb->pipe)) + | (is_out ? QH_INFO1_DIR_OUT : QH_INFO1_DIR_IN) + | usb_pipe_to_qh_type(urb->pipe) + | QH_INFO1_DEV_INFO_IDX(wusb_port_no_to_idx(usb_dev->portnum)) + | QH_INFO1_MAX_PKT_LEN(usb_maxpacket(urb->dev, urb->pipe, is_out)) + ); + qset->qh.info2 = cpu_to_le32( + QH_INFO2_BURST(qset->max_burst) + | QH_INFO2_DBP(0) + | QH_INFO2_MAX_COUNT(3) + | QH_INFO2_MAX_RETRY(3) + | QH_INFO2_MAX_SEQ(qset->max_seq - 1) + ); + /* FIXME: where can we obtain these Tx parameters from? Why + * doesn't the chip know what Tx power to use? It knows the Rx + * strength and can presumably guess the Tx power required + * from that? */ + qset->qh.info3 = cpu_to_le32( + QH_INFO3_TX_RATE_53_3 + | QH_INFO3_TX_PWR(0) /* 0 == max power */ + ); +} + +/** + * qset_clear - clear fields in a qset so it may be reinserted into a + * schedule + */ +void qset_clear(struct whc *whc, struct whc_qset *qset) +{ + qset->td_start = qset->td_end = qset->ntds = 0; + qset->remove = 0; + + qset->qh.link = cpu_to_le32(QH_LINK_NTDS(8) | QH_LINK_T); + qset->qh.status = cpu_to_le16(QH_STATUS_ICUR(qset->td_start)); + qset->qh.err_count = 0; + qset->qh.cur_window = cpu_to_le32((1 << qset->max_burst) - 1); + qset->qh.scratch[0] = 0; + qset->qh.scratch[1] = 0; + qset->qh.scratch[2] = 0; + + memset(&qset->qh.overlay, 0, sizeof(qset->qh.overlay)); + + init_completion(&qset->remove_complete); +} + +/** + * get_qset - get the qset for an async endpoint + * + * A new qset is created if one does not already exist. + */ +struct whc_qset *get_qset(struct whc *whc, struct urb *urb, + gfp_t mem_flags) +{ + struct whc_qset *qset; + + qset = urb->ep->hcpriv; + if (qset == NULL) { + qset = qset_alloc(whc, mem_flags); + if (qset == NULL) + return NULL; + + qset->ep = urb->ep; + urb->ep->hcpriv = qset; + qset_fill_qh(qset, urb); + } + return qset; +} + +void qset_remove_complete(struct whc *whc, struct whc_qset *qset) +{ + list_del_init(&qset->list_node); + complete(&qset->remove_complete); +} + +/** + * qset_add_qtds - add qTDs for an URB to a qset + * + * Returns true if the list (ASL/PZL) must be updated because (for a + * WHCI 0.95 controller) an activated qTD was pointed to be iCur. + */ +enum whc_update qset_add_qtds(struct whc *whc, struct whc_qset *qset) +{ + struct whc_std *std; + enum whc_update update = 0; + + list_for_each_entry(std, &qset->stds, list_node) { + struct whc_qtd *qtd; + uint32_t status; + + if (qset->ntds >= WHCI_QSET_TD_MAX + || (qset->pause_after_urb && std->urb != qset->pause_after_urb)) + break; + + if (std->qtd) + continue; /* already has a qTD */ + + qtd = std->qtd = &qset->qtd[qset->td_end]; + + /* Fill in setup bytes for control transfers. */ + if (usb_pipecontrol(std->urb->pipe)) + memcpy(qtd->setup, std->urb->setup_packet, 8); + + status = QTD_STS_ACTIVE | QTD_STS_LEN(std->len); + + if (whc_std_last(std) && usb_pipeout(std->urb->pipe)) + status |= QTD_STS_LAST_PKT; + + /* + * For an IN transfer the iAlt field should be set so + * the h/w will automatically advance to the next + * transfer. However, if there are 8 or more TDs + * remaining in this transfer then iAlt cannot be set + * as it could point to somewhere in this transfer. + */ + if (std->ntds_remaining < WHCI_QSET_TD_MAX) { + int ialt; + ialt = (qset->td_end + std->ntds_remaining) % WHCI_QSET_TD_MAX; + status |= QTD_STS_IALT(ialt); + } else if (usb_pipein(std->urb->pipe)) + qset->pause_after_urb = std->urb; + + if (std->num_pointers) + qtd->options = cpu_to_le32(QTD_OPT_IOC); + else + qtd->options = cpu_to_le32(QTD_OPT_IOC | QTD_OPT_SMALL); + qtd->page_list_ptr = cpu_to_le64(std->dma_addr); + + qtd->status = cpu_to_le32(status); + + if (QH_STATUS_TO_ICUR(qset->qh.status) == qset->td_end) + update = WHC_UPDATE_UPDATED; + + if (++qset->td_end >= WHCI_QSET_TD_MAX) + qset->td_end = 0; + qset->ntds++; + } + + return update; +} + +/** + * qset_remove_qtd - remove the first qTD from a qset. + * + * The qTD might be still active (if it's part of a IN URB that + * resulted in a short read) so ensure it's deactivated. + */ +static void qset_remove_qtd(struct whc *whc, struct whc_qset *qset) +{ + qset->qtd[qset->td_start].status = 0; + + if (++qset->td_start >= WHCI_QSET_TD_MAX) + qset->td_start = 0; + qset->ntds--; +} + +/** + * qset_free_std - remove an sTD and free it. + * @whc: the WHCI host controller + * @std: the sTD to remove and free. + */ +void qset_free_std(struct whc *whc, struct whc_std *std) +{ + list_del(&std->list_node); + if (std->num_pointers) { + dma_unmap_single(whc->wusbhc.dev, std->dma_addr, + std->num_pointers * sizeof(struct whc_page_list_entry), + DMA_TO_DEVICE); + kfree(std->pl_virt); + } + + kfree(std); +} + +/** + * qset_remove_qtds - remove an URB's qTDs (and sTDs). + */ +static void qset_remove_qtds(struct whc *whc, struct whc_qset *qset, + struct urb *urb) +{ + struct whc_std *std, *t; + + list_for_each_entry_safe(std, t, &qset->stds, list_node) { + if (std->urb != urb) + break; + if (std->qtd != NULL) + qset_remove_qtd(whc, qset); + qset_free_std(whc, std); + } +} + +/** + * qset_free_stds - free any remaining sTDs for an URB. + */ +static void qset_free_stds(struct whc_qset *qset, struct urb *urb) +{ + struct whc_std *std, *t; + + list_for_each_entry_safe(std, t, &qset->stds, list_node) { + if (std->urb == urb) + qset_free_std(qset->whc, std); + } +} + +static int qset_fill_page_list(struct whc *whc, struct whc_std *std, gfp_t mem_flags) +{ + dma_addr_t dma_addr = std->dma_addr; + dma_addr_t sp, ep; + size_t std_len = std->len; + size_t pl_len; + int p; + + sp = ALIGN(dma_addr, WHCI_PAGE_SIZE); + ep = dma_addr + std_len; + std->num_pointers = DIV_ROUND_UP(ep - sp, WHCI_PAGE_SIZE); + + pl_len = std->num_pointers * sizeof(struct whc_page_list_entry); + std->pl_virt = kmalloc(pl_len, mem_flags); + if (std->pl_virt == NULL) + return -ENOMEM; + std->dma_addr = dma_map_single(whc->wusbhc.dev, std->pl_virt, pl_len, DMA_TO_DEVICE); + + for (p = 0; p < std->num_pointers; p++) { + std->pl_virt[p].buf_ptr = cpu_to_le64(dma_addr); + dma_addr = ALIGN(dma_addr + WHCI_PAGE_SIZE, WHCI_PAGE_SIZE); + } + + return 0; +} + +/** + * urb_dequeue_work - executes asl/pzl update and gives back the urb to the system. + */ +static void urb_dequeue_work(struct work_struct *work) +{ + struct whc_urb *wurb = container_of(work, struct whc_urb, dequeue_work); + struct whc_qset *qset = wurb->qset; + struct whc *whc = qset->whc; + unsigned long flags; + + if (wurb->is_async == true) + asl_update(whc, WUSBCMD_ASYNC_UPDATED + | WUSBCMD_ASYNC_SYNCED_DB + | WUSBCMD_ASYNC_QSET_RM); + else + pzl_update(whc, WUSBCMD_PERIODIC_UPDATED + | WUSBCMD_PERIODIC_SYNCED_DB + | WUSBCMD_PERIODIC_QSET_RM); + + spin_lock_irqsave(&whc->lock, flags); + qset_remove_urb(whc, qset, wurb->urb, wurb->status); + spin_unlock_irqrestore(&whc->lock, flags); +} + +/** + * qset_add_urb - add an urb to the qset's queue. + * + * The URB is chopped into sTDs, one for each qTD that will required. + * At least one qTD (and sTD) is required even if the transfer has no + * data (e.g., for some control transfers). + */ +int qset_add_urb(struct whc *whc, struct whc_qset *qset, struct urb *urb, + gfp_t mem_flags) +{ + struct whc_urb *wurb; + int remaining = urb->transfer_buffer_length; + u64 transfer_dma = urb->transfer_dma; + int ntds_remaining; + + ntds_remaining = DIV_ROUND_UP(remaining, QTD_MAX_XFER_SIZE); + if (ntds_remaining == 0) + ntds_remaining = 1; + + wurb = kzalloc(sizeof(struct whc_urb), mem_flags); + if (wurb == NULL) + goto err_no_mem; + urb->hcpriv = wurb; + wurb->qset = qset; + wurb->urb = urb; + INIT_WORK(&wurb->dequeue_work, urb_dequeue_work); + + while (ntds_remaining) { + struct whc_std *std; + size_t std_len; + + std = kmalloc(sizeof(struct whc_std), mem_flags); + if (std == NULL) + goto err_no_mem; + + std_len = remaining; + if (std_len > QTD_MAX_XFER_SIZE) + std_len = QTD_MAX_XFER_SIZE; + + std->urb = urb; + std->dma_addr = transfer_dma; + std->len = std_len; + std->ntds_remaining = ntds_remaining; + std->qtd = NULL; + + INIT_LIST_HEAD(&std->list_node); + list_add_tail(&std->list_node, &qset->stds); + + if (std_len > WHCI_PAGE_SIZE) { + if (qset_fill_page_list(whc, std, mem_flags) < 0) + goto err_no_mem; + } else + std->num_pointers = 0; + + ntds_remaining--; + remaining -= std_len; + transfer_dma += std_len; + } + + return 0; + +err_no_mem: + qset_free_stds(qset, urb); + return -ENOMEM; +} + +/** + * qset_remove_urb - remove an URB from the urb queue. + * + * The URB is returned to the USB subsystem. + */ +void qset_remove_urb(struct whc *whc, struct whc_qset *qset, + struct urb *urb, int status) +{ + struct wusbhc *wusbhc = &whc->wusbhc; + struct whc_urb *wurb = urb->hcpriv; + + usb_hcd_unlink_urb_from_ep(&wusbhc->usb_hcd, urb); + /* Drop the lock as urb->complete() may enqueue another urb. */ + spin_unlock(&whc->lock); + wusbhc_giveback_urb(wusbhc, urb, status); + spin_lock(&whc->lock); + + kfree(wurb); +} + +/** + * get_urb_status_from_qtd - get the completed urb status from qTD status + * @urb: completed urb + * @status: qTD status + */ +static int get_urb_status_from_qtd(struct urb *urb, u32 status) +{ + if (status & QTD_STS_HALTED) { + if (status & QTD_STS_DBE) + return usb_pipein(urb->pipe) ? -ENOSR : -ECOMM; + else if (status & QTD_STS_BABBLE) + return -EOVERFLOW; + else if (status & QTD_STS_RCE) + return -ETIME; + return -EPIPE; + } + if (usb_pipein(urb->pipe) + && (urb->transfer_flags & URB_SHORT_NOT_OK) + && urb->actual_length < urb->transfer_buffer_length) + return -EREMOTEIO; + return 0; +} + +/** + * process_inactive_qtd - process an inactive (but not halted) qTD. + * + * Update the urb with the transfer bytes from the qTD, if the urb is + * completely transfered or (in the case of an IN only) the LPF is + * set, then the transfer is complete and the urb should be returned + * to the system. + */ +void process_inactive_qtd(struct whc *whc, struct whc_qset *qset, + struct whc_qtd *qtd) +{ + struct whc_std *std = list_first_entry(&qset->stds, struct whc_std, list_node); + struct urb *urb = std->urb; + uint32_t status; + bool complete; + + status = le32_to_cpu(qtd->status); + + urb->actual_length += std->len - QTD_STS_TO_LEN(status); + + if (usb_pipein(urb->pipe) && (status & QTD_STS_LAST_PKT)) + complete = true; + else + complete = whc_std_last(std); + + qset_remove_qtd(whc, qset); + qset_free_std(whc, std); + + /* + * Transfers for this URB are complete? Then return it to the + * USB subsystem. + */ + if (complete) { + qset_remove_qtds(whc, qset, urb); + qset_remove_urb(whc, qset, urb, get_urb_status_from_qtd(urb, status)); + + /* + * If iAlt isn't valid then the hardware didn't + * advance iCur. Adjust the start and end pointers to + * match iCur. + */ + if (!(status & QTD_STS_IALT_VALID)) + qset->td_start = qset->td_end + = QH_STATUS_TO_ICUR(le16_to_cpu(qset->qh.status)); + qset->pause_after_urb = NULL; + } +} + +/** + * process_halted_qtd - process a qset with a halted qtd + * + * Remove all the qTDs for the failed URB and return the failed URB to + * the USB subsystem. Then remove all other qTDs so the qset can be + * removed. + * + * FIXME: this is the point where rate adaptation can be done. If a + * transfer failed because it exceeded the maximum number of retries + * then it could be reactivated with a slower rate without having to + * remove the qset. + */ +void process_halted_qtd(struct whc *whc, struct whc_qset *qset, + struct whc_qtd *qtd) +{ + struct whc_std *std = list_first_entry(&qset->stds, struct whc_std, list_node); + struct urb *urb = std->urb; + int urb_status; + + urb_status = get_urb_status_from_qtd(urb, le32_to_cpu(qtd->status)); + + qset_remove_qtds(whc, qset, urb); + qset_remove_urb(whc, qset, urb, urb_status); + + list_for_each_entry(std, &qset->stds, list_node) { + if (qset->ntds == 0) + break; + qset_remove_qtd(whc, qset); + std->qtd = NULL; + } + + qset->remove = 1; +} + +void qset_free(struct whc *whc, struct whc_qset *qset) +{ + dma_pool_free(whc->qset_pool, qset, qset->qset_dma); +} + +/** + * qset_delete - wait for a qset to be unused, then free it. + */ +void qset_delete(struct whc *whc, struct whc_qset *qset) +{ + wait_for_completion(&qset->remove_complete); + qset_free(whc, qset); +} diff --git a/drivers/usb/host/whci/whcd.h b/drivers/usb/host/whci/whcd.h new file mode 100644 index 000000000000..1d2a53bd39fd --- /dev/null +++ b/drivers/usb/host/whci/whcd.h @@ -0,0 +1,197 @@ +/* + * Wireless Host Controller (WHC) private header. + * + * Copyright (C) 2007 Cambridge Silicon Radio Ltd. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + */ +#ifndef __WHCD_H +#define __WHCD_H + +#include <linux/uwb/whci.h> +#include <linux/workqueue.h> + +#include "whci-hc.h" + +/* Generic command timeout. */ +#define WHC_GENCMD_TIMEOUT_MS 100 + + +struct whc { + struct wusbhc wusbhc; + struct umc_dev *umc; + + resource_size_t base_phys; + void __iomem *base; + int irq; + + u8 n_devices; + u8 n_keys; + u8 n_mmc_ies; + + u64 *pz_list; + struct dn_buf_entry *dn_buf; + struct di_buf_entry *di_buf; + dma_addr_t pz_list_dma; + dma_addr_t dn_buf_dma; + dma_addr_t di_buf_dma; + + spinlock_t lock; + struct mutex mutex; + + void * gen_cmd_buf; + dma_addr_t gen_cmd_buf_dma; + wait_queue_head_t cmd_wq; + + struct workqueue_struct *workqueue; + struct work_struct dn_work; + + struct dma_pool *qset_pool; + + struct list_head async_list; + struct list_head async_removed_list; + wait_queue_head_t async_list_wq; + struct work_struct async_work; + + struct list_head periodic_list[5]; + struct list_head periodic_removed_list; + wait_queue_head_t periodic_list_wq; + struct work_struct periodic_work; +}; + +#define wusbhc_to_whc(w) (container_of((w), struct whc, wusbhc)) + +/** + * struct whc_std - a software TD. + * @urb: the URB this sTD is for. + * @offset: start of the URB's data for this TD. + * @len: the length of data in the associated TD. + * @ntds_remaining: number of TDs (starting from this one) in this transfer. + * + * Queued URBs may require more TDs than are available in a qset so we + * use a list of these "software TDs" (sTDs) to hold per-TD data. + */ +struct whc_std { + struct urb *urb; + size_t len; + int ntds_remaining; + struct whc_qtd *qtd; + + struct list_head list_node; + int num_pointers; + dma_addr_t dma_addr; + struct whc_page_list_entry *pl_virt; +}; + +/** + * struct whc_urb - per URB host controller structure. + * @urb: the URB this struct is for. + * @qset: the qset associated to the URB. + * @dequeue_work: the work to remove the URB when dequeued. + * @is_async: the URB belongs to async sheduler or not. + * @status: the status to be returned when calling wusbhc_giveback_urb. + */ +struct whc_urb { + struct urb *urb; + struct whc_qset *qset; + struct work_struct dequeue_work; + bool is_async; + int status; +}; + +/** + * whc_std_last - is this sTD the URB's last? + * @std: the sTD to check. + */ +static inline bool whc_std_last(struct whc_std *std) +{ + return std->ntds_remaining <= 1; +} + +enum whc_update { + WHC_UPDATE_ADDED = 0x01, + WHC_UPDATE_REMOVED = 0x02, + WHC_UPDATE_UPDATED = 0x04, +}; + +/* init.c */ +int whc_init(struct whc *whc); +void whc_clean_up(struct whc *whc); + +/* hw.c */ +void whc_write_wusbcmd(struct whc *whc, u32 mask, u32 val); +int whc_do_gencmd(struct whc *whc, u32 cmd, u32 params, void *addr, size_t len); + +/* wusb.c */ +int whc_wusbhc_start(struct wusbhc *wusbhc); +void whc_wusbhc_stop(struct wusbhc *wusbhc); +int whc_mmcie_add(struct wusbhc *wusbhc, u8 interval, u8 repeat_cnt, + u8 handle, struct wuie_hdr *wuie); +int whc_mmcie_rm(struct wusbhc *wusbhc, u8 handle); +int whc_bwa_set(struct wusbhc *wusbhc, s8 stream_index, const struct uwb_mas_bm *mas_bm); +int whc_dev_info_set(struct wusbhc *wusbhc, struct wusb_dev *wusb_dev); +int whc_set_num_dnts(struct wusbhc *wusbhc, u8 interval, u8 slots); +int whc_set_ptk(struct wusbhc *wusbhc, u8 port_idx, u32 tkid, + const void *ptk, size_t key_size); +int whc_set_gtk(struct wusbhc *wusbhc, u32 tkid, + const void *gtk, size_t key_size); +int whc_set_cluster_id(struct whc *whc, u8 bcid); + +/* int.c */ +irqreturn_t whc_int_handler(struct usb_hcd *hcd); +void whc_dn_work(struct work_struct *work); + +/* asl.c */ +void asl_start(struct whc *whc); +void asl_stop(struct whc *whc); +int asl_init(struct whc *whc); +void asl_clean_up(struct whc *whc); +int asl_urb_enqueue(struct whc *whc, struct urb *urb, gfp_t mem_flags); +int asl_urb_dequeue(struct whc *whc, struct urb *urb, int status); +void asl_qset_delete(struct whc *whc, struct whc_qset *qset); +void scan_async_work(struct work_struct *work); + +/* pzl.c */ +int pzl_init(struct whc *whc); +void pzl_clean_up(struct whc *whc); +void pzl_start(struct whc *whc); +void pzl_stop(struct whc *whc); +int pzl_urb_enqueue(struct whc *whc, struct urb *urb, gfp_t mem_flags); +int pzl_urb_dequeue(struct whc *whc, struct urb *urb, int status); +void pzl_qset_delete(struct whc *whc, struct whc_qset *qset); +void scan_periodic_work(struct work_struct *work); + +/* qset.c */ +struct whc_qset *qset_alloc(struct whc *whc, gfp_t mem_flags); +void qset_free(struct whc *whc, struct whc_qset *qset); +struct whc_qset *get_qset(struct whc *whc, struct urb *urb, gfp_t mem_flags); +void qset_delete(struct whc *whc, struct whc_qset *qset); +void qset_clear(struct whc *whc, struct whc_qset *qset); +int qset_add_urb(struct whc *whc, struct whc_qset *qset, struct urb *urb, + gfp_t mem_flags); +void qset_free_std(struct whc *whc, struct whc_std *std); +void qset_remove_urb(struct whc *whc, struct whc_qset *qset, + struct urb *urb, int status); +void process_halted_qtd(struct whc *whc, struct whc_qset *qset, + struct whc_qtd *qtd); +void process_inactive_qtd(struct whc *whc, struct whc_qset *qset, + struct whc_qtd *qtd); +enum whc_update qset_add_qtds(struct whc *whc, struct whc_qset *qset); +void qset_remove_complete(struct whc *whc, struct whc_qset *qset); +void dump_qset(struct whc_qset *qset, struct device *dev); +void pzl_update(struct whc *whc, uint32_t wusbcmd); +void asl_update(struct whc *whc, uint32_t wusbcmd); + +#endif /* #ifndef __WHCD_H */ diff --git a/drivers/usb/host/whci/whci-hc.h b/drivers/usb/host/whci/whci-hc.h new file mode 100644 index 000000000000..bff1eb7a35cf --- /dev/null +++ b/drivers/usb/host/whci/whci-hc.h @@ -0,0 +1,416 @@ +/* + * Wireless Host Controller (WHC) data structures. + * + * Copyright (C) 2007 Cambridge Silicon Radio Ltd. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + */ +#ifndef _WHCI_WHCI_HC_H +#define _WHCI_WHCI_HC_H + +#include <linux/list.h> + +/** + * WHCI_PAGE_SIZE - page size use by WHCI + * + * WHCI assumes that host system uses pages of 4096 octets. + */ +#define WHCI_PAGE_SIZE 4096 + + +/** + * QTD_MAX_TXFER_SIZE - max number of bytes to transfer with a single + * qtd. + * + * This is 2^20 - 1. + */ +#define QTD_MAX_XFER_SIZE 1048575 + + +/** + * struct whc_qtd - Queue Element Transfer Descriptors (qTD) + * + * This describes the data for a bulk, control or interrupt transfer. + * + * [WHCI] section 3.2.4 + */ +struct whc_qtd { + __le32 status; /*< remaining transfer len and transfer status */ + __le32 options; + __le64 page_list_ptr; /*< physical pointer to data buffer page list*/ + __u8 setup[8]; /*< setup data for control transfers */ +} __attribute__((packed)); + +#define QTD_STS_ACTIVE (1 << 31) /* enable execution of transaction */ +#define QTD_STS_HALTED (1 << 30) /* transfer halted */ +#define QTD_STS_DBE (1 << 29) /* data buffer error */ +#define QTD_STS_BABBLE (1 << 28) /* babble detected */ +#define QTD_STS_RCE (1 << 27) /* retry count exceeded */ +#define QTD_STS_LAST_PKT (1 << 26) /* set Last Packet Flag in WUSB header */ +#define QTD_STS_INACTIVE (1 << 25) /* queue set is marked inactive */ +#define QTD_STS_IALT_VALID (1 << 23) /* iAlt field is valid */ +#define QTD_STS_IALT(i) (QTD_STS_IALT_VALID | ((i) << 20)) /* iAlt field */ +#define QTD_STS_LEN(l) ((l) << 0) /* transfer length */ +#define QTD_STS_TO_LEN(s) ((s) & 0x000fffff) + +#define QTD_OPT_IOC (1 << 1) /* page_list_ptr points to buffer directly */ +#define QTD_OPT_SMALL (1 << 0) /* interrupt on complete */ + +/** + * struct whc_itd - Isochronous Queue Element Transfer Descriptors (iTD) + * + * This describes the data and other parameters for an isochronous + * transfer. + * + * [WHCI] section 3.2.5 + */ +struct whc_itd { + __le16 presentation_time; /*< presentation time for OUT transfers */ + __u8 num_segments; /*< number of data segments in segment list */ + __u8 status; /*< command execution status */ + __le32 options; /*< misc transfer options */ + __le64 page_list_ptr; /*< physical pointer to data buffer page list */ + __le64 seg_list_ptr; /*< physical pointer to segment list */ +} __attribute__((packed)); + +#define ITD_STS_ACTIVE (1 << 7) /* enable execution of transaction */ +#define ITD_STS_DBE (1 << 5) /* data buffer error */ +#define ITD_STS_BABBLE (1 << 4) /* babble detected */ +#define ITD_STS_INACTIVE (1 << 1) /* queue set is marked inactive */ + +#define ITD_OPT_IOC (1 << 1) /* interrupt on complete */ +#define ITD_OPT_SMALL (1 << 0) /* page_list_ptr points to buffer directly */ + +/** + * Page list entry. + * + * A TD's page list must contain sufficient page list entries for the + * total data length in the TD. + * + * [WHCI] section 3.2.4.3 + */ +struct whc_page_list_entry { + __le64 buf_ptr; /*< physical pointer to buffer */ +} __attribute__((packed)); + +/** + * struct whc_seg_list_entry - Segment list entry. + * + * Describes a portion of the data buffer described in the containing + * qTD's page list. + * + * seg_ptr = qtd->page_list_ptr[qtd->seg_list_ptr[seg].idx].buf_ptr + * + qtd->seg_list_ptr[seg].offset; + * + * Segments can't cross page boundries. + * + * [WHCI] section 3.2.5.5 + */ +struct whc_seg_list_entry { + __le16 len; /*< segment length */ + __u8 idx; /*< index into page list */ + __u8 status; /*< segment status */ + __le16 offset; /*< 12 bit offset into page */ +} __attribute__((packed)); + +/** + * struct whc_qhead - endpoint and status information for a qset. + * + * [WHCI] section 3.2.6 + */ +struct whc_qhead { + __le64 link; /*< next qset in list */ + __le32 info1; + __le32 info2; + __le32 info3; + __le16 status; + __le16 err_count; /*< transaction error count */ + __le32 cur_window; + __le32 scratch[3]; /*< h/w scratch area */ + union { + struct whc_qtd qtd; + struct whc_itd itd; + } overlay; +} __attribute__((packed)); + +#define QH_LINK_PTR_MASK (~0x03Full) +#define QH_LINK_PTR(ptr) ((ptr) & QH_LINK_PTR_MASK) +#define QH_LINK_IQS (1 << 4) /* isochronous queue set */ +#define QH_LINK_NTDS(n) (((n) - 1) << 1) /* number of TDs in queue set */ +#define QH_LINK_T (1 << 0) /* last queue set in periodic schedule list */ + +#define QH_INFO1_EP(e) ((e) << 0) /* endpoint number */ +#define QH_INFO1_DIR_IN (1 << 4) /* IN transfer */ +#define QH_INFO1_DIR_OUT (0 << 4) /* OUT transfer */ +#define QH_INFO1_TR_TYPE_CTRL (0x0 << 5) /* control transfer */ +#define QH_INFO1_TR_TYPE_ISOC (0x1 << 5) /* isochronous transfer */ +#define QH_INFO1_TR_TYPE_BULK (0x2 << 5) /* bulk transfer */ +#define QH_INFO1_TR_TYPE_INT (0x3 << 5) /* interrupt */ +#define QH_INFO1_TR_TYPE_LP_INT (0x7 << 5) /* low power interrupt */ +#define QH_INFO1_DEV_INFO_IDX(i) ((i) << 8) /* index into device info buffer */ +#define QH_INFO1_SET_INACTIVE (1 << 15) /* set inactive after transfer */ +#define QH_INFO1_MAX_PKT_LEN(l) ((l) << 16) /* maximum packet length */ + +#define QH_INFO2_BURST(b) ((b) << 0) /* maximum burst length */ +#define QH_INFO2_DBP(p) ((p) << 5) /* data burst policy (see [WUSB] table 5-7) */ +#define QH_INFO2_MAX_COUNT(c) ((c) << 8) /* max isoc/int pkts per zone */ +#define QH_INFO2_RQS (1 << 15) /* reactivate queue set */ +#define QH_INFO2_MAX_RETRY(r) ((r) << 16) /* maximum transaction retries */ +#define QH_INFO2_MAX_SEQ(s) ((s) << 20) /* maximum sequence number */ +#define QH_INFO3_MAX_DELAY(d) ((d) << 0) /* maximum stream delay in 125 us units (isoc only) */ +#define QH_INFO3_INTERVAL(i) ((i) << 16) /* segment interval in 125 us units (isoc only) */ + +#define QH_INFO3_TX_RATE_53_3 (0 << 24) +#define QH_INFO3_TX_RATE_80 (1 << 24) +#define QH_INFO3_TX_RATE_106_7 (2 << 24) +#define QH_INFO3_TX_RATE_160 (3 << 24) +#define QH_INFO3_TX_RATE_200 (4 << 24) +#define QH_INFO3_TX_RATE_320 (5 << 24) +#define QH_INFO3_TX_RATE_400 (6 << 24) +#define QH_INFO3_TX_RATE_480 (7 << 24) +#define QH_INFO3_TX_PWR(p) ((p) << 29) /* transmit power (see [WUSB] section 5.2.1.2) */ + +#define QH_STATUS_FLOW_CTRL (1 << 15) +#define QH_STATUS_ICUR(i) ((i) << 5) +#define QH_STATUS_TO_ICUR(s) (((s) >> 5) & 0x7) + +/** + * usb_pipe_to_qh_type - USB core pipe type to QH transfer type + * + * Returns the QH type field for a USB core pipe type. + */ +static inline unsigned usb_pipe_to_qh_type(unsigned pipe) +{ + static const unsigned type[] = { + [PIPE_ISOCHRONOUS] = QH_INFO1_TR_TYPE_ISOC, + [PIPE_INTERRUPT] = QH_INFO1_TR_TYPE_INT, + [PIPE_CONTROL] = QH_INFO1_TR_TYPE_CTRL, + [PIPE_BULK] = QH_INFO1_TR_TYPE_BULK, + }; + return type[usb_pipetype(pipe)]; +} + +/** + * Maxiumum number of TDs in a qset. + */ +#define WHCI_QSET_TD_MAX 8 + +/** + * struct whc_qset - WUSB data transfers to a specific endpoint + * @qh: the QHead of this qset + * @qtd: up to 8 qTDs (for qsets for control, bulk and interrupt + * transfers) + * @itd: up to 8 iTDs (for qsets for isochronous transfers) + * @qset_dma: DMA address for this qset + * @whc: WHCI HC this qset is for + * @ep: endpoint + * @stds: list of sTDs queued to this qset + * @ntds: number of qTDs queued (not necessarily the same as nTDs + * field in the QH) + * @td_start: index of the first qTD in the list + * @td_end: index of next free qTD in the list (provided + * ntds < WHCI_QSET_TD_MAX) + * + * Queue Sets (qsets) are added to the asynchronous schedule list + * (ASL) or the periodic zone list (PZL). + * + * qsets may contain up to 8 TDs (either qTDs or iTDs as appropriate). + * Each TD may refer to at most 1 MiB of data. If a single transfer + * has > 8MiB of data, TDs can be reused as they are completed since + * the TD list is used as a circular buffer. Similarly, several + * (smaller) transfers may be queued in a qset. + * + * WHCI controllers may cache portions of the qsets in the ASL and + * PZL, requiring the WHCD to inform the WHC that the lists have been + * updated (fields changed or qsets inserted or removed). For safe + * insertion and removal of qsets from the lists the schedule must be + * stopped to avoid races in updating the QH link pointers. + * + * Since the HC is free to execute qsets in any order, all transfers + * to an endpoint should use the same qset to ensure transfers are + * executed in the order they're submitted. + * + * [WHCI] section 3.2.3 + */ +struct whc_qset { + struct whc_qhead qh; + union { + struct whc_qtd qtd[WHCI_QSET_TD_MAX]; + struct whc_itd itd[WHCI_QSET_TD_MAX]; + }; + + /* private data for WHCD */ + dma_addr_t qset_dma; + struct whc *whc; + struct usb_host_endpoint *ep; + struct list_head stds; + int ntds; + int td_start; + int td_end; + struct list_head list_node; + unsigned in_sw_list:1; + unsigned in_hw_list:1; + unsigned remove:1; + struct urb *pause_after_urb; + struct completion remove_complete; + int max_burst; + int max_seq; +}; + +static inline void whc_qset_set_link_ptr(u64 *ptr, u64 target) +{ + if (target) + *ptr = (*ptr & ~(QH_LINK_PTR_MASK | QH_LINK_T)) | QH_LINK_PTR(target); + else + *ptr = QH_LINK_T; +} + +/** + * struct di_buf_entry - Device Information (DI) buffer entry. + * + * There's one of these per connected device. + */ +struct di_buf_entry { + __le32 availability_info[8]; /*< MAS availability information, one MAS per bit */ + __le32 addr_sec_info; /*< addressing and security info */ + __le32 reserved[7]; +} __attribute__((packed)); + +#define WHC_DI_SECURE (1 << 31) +#define WHC_DI_DISABLE (1 << 30) +#define WHC_DI_KEY_IDX(k) ((k) << 8) +#define WHC_DI_KEY_IDX_MASK 0x0000ff00 +#define WHC_DI_DEV_ADDR(a) ((a) << 0) +#define WHC_DI_DEV_ADDR_MASK 0x000000ff + +/** + * struct dn_buf_entry - Device Notification (DN) buffer entry. + * + * [WHCI] section 3.2.8 + */ +struct dn_buf_entry { + __u8 msg_size; /*< number of octets of valid DN data */ + __u8 reserved1; + __u8 src_addr; /*< source address */ + __u8 status; /*< buffer entry status */ + __le32 tkid; /*< TKID for source device, valid if secure bit is set */ + __u8 dn_data[56]; /*< up to 56 octets of DN data */ +} __attribute__((packed)); + +#define WHC_DN_STATUS_VALID (1 << 7) /* buffer entry is valid */ +#define WHC_DN_STATUS_SECURE (1 << 6) /* notification received using secure frame */ + +#define WHC_N_DN_ENTRIES (4096 / sizeof(struct dn_buf_entry)) + +/* The Add MMC IE WUSB Generic Command may take up to 256 bytes of + data. [WHCI] section 2.4.7. */ +#define WHC_GEN_CMD_DATA_LEN 256 + +/* + * HC registers. + * + * [WHCI] section 2.4 + */ + +#define WHCIVERSION 0x00 + +#define WHCSPARAMS 0x04 +# define WHCSPARAMS_TO_N_MMC_IES(p) (((p) >> 16) & 0xff) +# define WHCSPARAMS_TO_N_KEYS(p) (((p) >> 8) & 0xff) +# define WHCSPARAMS_TO_N_DEVICES(p) (((p) >> 0) & 0x7f) + +#define WUSBCMD 0x08 +# define WUSBCMD_BCID(b) ((b) << 16) +# define WUSBCMD_BCID_MASK (0xff << 16) +# define WUSBCMD_ASYNC_QSET_RM (1 << 12) +# define WUSBCMD_PERIODIC_QSET_RM (1 << 11) +# define WUSBCMD_WUSBSI(s) ((s) << 8) +# define WUSBCMD_WUSBSI_MASK (0x7 << 8) +# define WUSBCMD_ASYNC_SYNCED_DB (1 << 7) +# define WUSBCMD_PERIODIC_SYNCED_DB (1 << 6) +# define WUSBCMD_ASYNC_UPDATED (1 << 5) +# define WUSBCMD_PERIODIC_UPDATED (1 << 4) +# define WUSBCMD_ASYNC_EN (1 << 3) +# define WUSBCMD_PERIODIC_EN (1 << 2) +# define WUSBCMD_WHCRESET (1 << 1) +# define WUSBCMD_RUN (1 << 0) + +#define WUSBSTS 0x0c +# define WUSBSTS_ASYNC_SCHED (1 << 15) +# define WUSBSTS_PERIODIC_SCHED (1 << 14) +# define WUSBSTS_DNTS_SCHED (1 << 13) +# define WUSBSTS_HCHALTED (1 << 12) +# define WUSBSTS_GEN_CMD_DONE (1 << 9) +# define WUSBSTS_CHAN_TIME_ROLLOVER (1 << 8) +# define WUSBSTS_DNTS_OVERFLOW (1 << 7) +# define WUSBSTS_BPST_ADJUSTMENT_CHANGED (1 << 6) +# define WUSBSTS_HOST_ERR (1 << 5) +# define WUSBSTS_ASYNC_SCHED_SYNCED (1 << 4) +# define WUSBSTS_PERIODIC_SCHED_SYNCED (1 << 3) +# define WUSBSTS_DNTS_INT (1 << 2) +# define WUSBSTS_ERR_INT (1 << 1) +# define WUSBSTS_INT (1 << 0) +# define WUSBSTS_INT_MASK 0x3ff + +#define WUSBINTR 0x10 +# define WUSBINTR_GEN_CMD_DONE (1 << 9) +# define WUSBINTR_CHAN_TIME_ROLLOVER (1 << 8) +# define WUSBINTR_DNTS_OVERFLOW (1 << 7) +# define WUSBINTR_BPST_ADJUSTMENT_CHANGED (1 << 6) +# define WUSBINTR_HOST_ERR (1 << 5) +# define WUSBINTR_ASYNC_SCHED_SYNCED (1 << 4) +# define WUSBINTR_PERIODIC_SCHED_SYNCED (1 << 3) +# define WUSBINTR_DNTS_INT (1 << 2) +# define WUSBINTR_ERR_INT (1 << 1) +# define WUSBINTR_INT (1 << 0) +# define WUSBINTR_ALL 0x3ff + +#define WUSBGENCMDSTS 0x14 +# define WUSBGENCMDSTS_ACTIVE (1 << 31) +# define WUSBGENCMDSTS_ERROR (1 << 24) +# define WUSBGENCMDSTS_IOC (1 << 23) +# define WUSBGENCMDSTS_MMCIE_ADD 0x01 +# define WUSBGENCMDSTS_MMCIE_RM 0x02 +# define WUSBGENCMDSTS_SET_MAS 0x03 +# define WUSBGENCMDSTS_CHAN_STOP 0x04 +# define WUSBGENCMDSTS_RWP_EN 0x05 + +#define WUSBGENCMDPARAMS 0x18 +#define WUSBGENADDR 0x20 +#define WUSBASYNCLISTADDR 0x28 +#define WUSBDNTSBUFADDR 0x30 +#define WUSBDEVICEINFOADDR 0x38 + +#define WUSBSETSECKEYCMD 0x40 +# define WUSBSETSECKEYCMD_SET (1 << 31) +# define WUSBSETSECKEYCMD_ERASE (1 << 30) +# define WUSBSETSECKEYCMD_GTK (1 << 8) +# define WUSBSETSECKEYCMD_IDX(i) ((i) << 0) + +#define WUSBTKID 0x44 +#define WUSBSECKEY 0x48 +#define WUSBPERIODICLISTBASE 0x58 +#define WUSBMASINDEX 0x60 + +#define WUSBDNTSCTRL 0x64 +# define WUSBDNTSCTRL_ACTIVE (1 << 31) +# define WUSBDNTSCTRL_INTERVAL(i) ((i) << 8) +# define WUSBDNTSCTRL_SLOTS(s) ((s) << 0) + +#define WUSBTIME 0x68 +#define WUSBBPST 0x6c +#define WUSBDIBUPDATED 0x70 + +#endif /* #ifndef _WHCI_WHCI_HC_H */ diff --git a/drivers/usb/host/whci/wusb.c b/drivers/usb/host/whci/wusb.c new file mode 100644 index 000000000000..66e4ddcd961d --- /dev/null +++ b/drivers/usb/host/whci/wusb.c @@ -0,0 +1,241 @@ +/* + * Wireless Host Controller (WHC) WUSB operations. + * + * Copyright (C) 2007 Cambridge Silicon Radio Ltd. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include <linux/version.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/uwb/umc.h> +#define D_LOCAL 1 +#include <linux/uwb/debug.h> + +#include "../../wusbcore/wusbhc.h" + +#include "whcd.h" + +#if D_LOCAL >= 1 +static void dump_di(struct whc *whc, int idx) +{ + struct di_buf_entry *di = &whc->di_buf[idx]; + struct device *dev = &whc->umc->dev; + char buf[128]; + + bitmap_scnprintf(buf, sizeof(buf), (unsigned long *)di->availability_info, UWB_NUM_MAS); + + d_printf(1, dev, "DI[%d]\n", idx); + d_printf(1, dev, " availability: %s\n", buf); + d_printf(1, dev, " %c%c key idx: %d dev addr: %d\n", + (di->addr_sec_info & WHC_DI_SECURE) ? 'S' : ' ', + (di->addr_sec_info & WHC_DI_DISABLE) ? 'D' : ' ', + (di->addr_sec_info & WHC_DI_KEY_IDX_MASK) >> 8, + (di->addr_sec_info & WHC_DI_DEV_ADDR_MASK)); +} +#else +static inline void dump_di(struct whc *whc, int idx) +{ +} +#endif + +static int whc_update_di(struct whc *whc, int idx) +{ + int offset = idx / 32; + u32 bit = 1 << (idx % 32); + + dump_di(whc, idx); + + le_writel(bit, whc->base + WUSBDIBUPDATED + offset); + + return whci_wait_for(&whc->umc->dev, + whc->base + WUSBDIBUPDATED + offset, bit, 0, + 100, "DI update"); +} + +/* + * WHCI starts and stops MMCs based on there being a valid GTK so + * these need only start/stop the asynchronous and periodic schedules. + */ + +int whc_wusbhc_start(struct wusbhc *wusbhc) +{ + struct whc *whc = wusbhc_to_whc(wusbhc); + + asl_start(whc); + pzl_start(whc); + + return 0; +} + +void whc_wusbhc_stop(struct wusbhc *wusbhc) +{ + struct whc *whc = wusbhc_to_whc(wusbhc); + + pzl_stop(whc); + asl_stop(whc); +} + +int whc_mmcie_add(struct wusbhc *wusbhc, u8 interval, u8 repeat_cnt, + u8 handle, struct wuie_hdr *wuie) +{ + struct whc *whc = wusbhc_to_whc(wusbhc); + u32 params; + + params = (interval << 24) + | (repeat_cnt << 16) + | (wuie->bLength << 8) + | handle; + + return whc_do_gencmd(whc, WUSBGENCMDSTS_MMCIE_ADD, params, wuie, wuie->bLength); +} + +int whc_mmcie_rm(struct wusbhc *wusbhc, u8 handle) +{ + struct whc *whc = wusbhc_to_whc(wusbhc); + u32 params; + + params = handle; + + return whc_do_gencmd(whc, WUSBGENCMDSTS_MMCIE_RM, params, NULL, 0); +} + +int whc_bwa_set(struct wusbhc *wusbhc, s8 stream_index, const struct uwb_mas_bm *mas_bm) +{ + struct whc *whc = wusbhc_to_whc(wusbhc); + + if (stream_index >= 0) + whc_write_wusbcmd(whc, WUSBCMD_WUSBSI_MASK, WUSBCMD_WUSBSI(stream_index)); + + return whc_do_gencmd(whc, WUSBGENCMDSTS_SET_MAS, 0, (void *)mas_bm, sizeof(*mas_bm)); +} + +int whc_dev_info_set(struct wusbhc *wusbhc, struct wusb_dev *wusb_dev) +{ + struct whc *whc = wusbhc_to_whc(wusbhc); + int idx = wusb_dev->port_idx; + struct di_buf_entry *di = &whc->di_buf[idx]; + int ret; + + mutex_lock(&whc->mutex); + + uwb_mas_bm_copy_le(di->availability_info, &wusb_dev->availability); + di->addr_sec_info &= ~(WHC_DI_DISABLE | WHC_DI_DEV_ADDR_MASK); + di->addr_sec_info |= WHC_DI_DEV_ADDR(wusb_dev->addr); + + ret = whc_update_di(whc, idx); + + mutex_unlock(&whc->mutex); + + return ret; +} + +/* + * Set the number of Device Notification Time Slots (DNTS) and enable + * device notifications. + */ +int whc_set_num_dnts(struct wusbhc *wusbhc, u8 interval, u8 slots) +{ + struct whc *whc = wusbhc_to_whc(wusbhc); + u32 dntsctrl; + + dntsctrl = WUSBDNTSCTRL_ACTIVE + | WUSBDNTSCTRL_INTERVAL(interval) + | WUSBDNTSCTRL_SLOTS(slots); + + le_writel(dntsctrl, whc->base + WUSBDNTSCTRL); + + return 0; +} + +static int whc_set_key(struct whc *whc, u8 key_index, uint32_t tkid, + const void *key, size_t key_size, bool is_gtk) +{ + uint32_t setkeycmd; + uint32_t seckey[4]; + int i; + int ret; + + memcpy(seckey, key, key_size); + setkeycmd = WUSBSETSECKEYCMD_SET | WUSBSETSECKEYCMD_IDX(key_index); + if (is_gtk) + setkeycmd |= WUSBSETSECKEYCMD_GTK; + + le_writel(tkid, whc->base + WUSBTKID); + for (i = 0; i < 4; i++) + le_writel(seckey[i], whc->base + WUSBSECKEY + 4*i); + le_writel(setkeycmd, whc->base + WUSBSETSECKEYCMD); + + ret = whci_wait_for(&whc->umc->dev, whc->base + WUSBSETSECKEYCMD, + WUSBSETSECKEYCMD_SET, 0, 100, "set key"); + + return ret; +} + +/** + * whc_set_ptk - set the PTK to use for a device. + * + * The index into the key table for this PTK is the same as the + * device's port index. + */ +int whc_set_ptk(struct wusbhc *wusbhc, u8 port_idx, u32 tkid, + const void *ptk, size_t key_size) +{ + struct whc *whc = wusbhc_to_whc(wusbhc); + struct di_buf_entry *di = &whc->di_buf[port_idx]; + int ret; + + mutex_lock(&whc->mutex); + + if (ptk) { + ret = whc_set_key(whc, port_idx, tkid, ptk, key_size, false); + if (ret) + goto out; + + di->addr_sec_info &= ~WHC_DI_KEY_IDX_MASK; + di->addr_sec_info |= WHC_DI_SECURE | WHC_DI_KEY_IDX(port_idx); + } else + di->addr_sec_info &= ~WHC_DI_SECURE; + + ret = whc_update_di(whc, port_idx); +out: + mutex_unlock(&whc->mutex); + return ret; +} + +/** + * whc_set_gtk - set the GTK for subsequent broadcast packets + * + * The GTK is stored in the last entry in the key table (the previous + * N_DEVICES entries are for the per-device PTKs). + */ +int whc_set_gtk(struct wusbhc *wusbhc, u32 tkid, + const void *gtk, size_t key_size) +{ + struct whc *whc = wusbhc_to_whc(wusbhc); + int ret; + + mutex_lock(&whc->mutex); + + ret = whc_set_key(whc, whc->n_devices, tkid, gtk, key_size, true); + + mutex_unlock(&whc->mutex); + + return ret; +} + +int whc_set_cluster_id(struct whc *whc, u8 bcid) +{ + whc_write_wusbcmd(whc, WUSBCMD_BCID_MASK, WUSBCMD_BCID(bcid)); + return 0; +} diff --git a/drivers/usb/misc/usbtest.c b/drivers/usb/misc/usbtest.c index b358c4e1cf21..444c69c447be 100644 --- a/drivers/usb/misc/usbtest.c +++ b/drivers/usb/misc/usbtest.c @@ -1561,8 +1561,7 @@ usbtest_ioctl (struct usb_interface *intf, unsigned int code, void *buf) if (code != USBTEST_REQUEST) return -EOPNOTSUPP; - if (param->iterations <= 0 || param->length < 0 - || param->sglen < 0 || param->vary < 0) + if (param->iterations <= 0) return -EINVAL; if (mutex_lock_interruptible(&dev->lock)) diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 3d87eabcd922..bd07eaa300b9 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -95,11 +95,20 @@ static int option_send_setup(struct tty_struct *tty, struct usb_serial_port *po #define HUAWEI_PRODUCT_E220 0x1003 #define HUAWEI_PRODUCT_E220BIS 0x1004 #define HUAWEI_PRODUCT_E1401 0x1401 +#define HUAWEI_PRODUCT_E1402 0x1402 #define HUAWEI_PRODUCT_E1403 0x1403 +#define HUAWEI_PRODUCT_E1404 0x1404 #define HUAWEI_PRODUCT_E1405 0x1405 #define HUAWEI_PRODUCT_E1406 0x1406 +#define HUAWEI_PRODUCT_E1407 0x1407 #define HUAWEI_PRODUCT_E1408 0x1408 #define HUAWEI_PRODUCT_E1409 0x1409 +#define HUAWEI_PRODUCT_E140A 0x140A +#define HUAWEI_PRODUCT_E140B 0x140B +#define HUAWEI_PRODUCT_E140C 0x140C +#define HUAWEI_PRODUCT_E140D 0x140D +#define HUAWEI_PRODUCT_E140E 0x140E +#define HUAWEI_PRODUCT_E140F 0x140F #define HUAWEI_PRODUCT_E1410 0x1410 #define HUAWEI_PRODUCT_E1411 0x1411 #define HUAWEI_PRODUCT_E1412 0x1412 @@ -110,6 +119,44 @@ static int option_send_setup(struct tty_struct *tty, struct usb_serial_port *po #define HUAWEI_PRODUCT_E1417 0x1417 #define HUAWEI_PRODUCT_E1418 0x1418 #define HUAWEI_PRODUCT_E1419 0x1419 +#define HUAWEI_PRODUCT_E141A 0x141A +#define HUAWEI_PRODUCT_E141B 0x141B +#define HUAWEI_PRODUCT_E141C 0x141C +#define HUAWEI_PRODUCT_E141D 0x141D +#define HUAWEI_PRODUCT_E141E 0x141E +#define HUAWEI_PRODUCT_E141F 0x141F +#define HUAWEI_PRODUCT_E1420 0x1420 +#define HUAWEI_PRODUCT_E1421 0x1421 +#define HUAWEI_PRODUCT_E1422 0x1422 +#define HUAWEI_PRODUCT_E1423 0x1423 +#define HUAWEI_PRODUCT_E1424 0x1424 +#define HUAWEI_PRODUCT_E1425 0x1425 +#define HUAWEI_PRODUCT_E1426 0x1426 +#define HUAWEI_PRODUCT_E1427 0x1427 +#define HUAWEI_PRODUCT_E1428 0x1428 +#define HUAWEI_PRODUCT_E1429 0x1429 +#define HUAWEI_PRODUCT_E142A 0x142A +#define HUAWEI_PRODUCT_E142B 0x142B +#define HUAWEI_PRODUCT_E142C 0x142C +#define HUAWEI_PRODUCT_E142D 0x142D +#define HUAWEI_PRODUCT_E142E 0x142E +#define HUAWEI_PRODUCT_E142F 0x142F +#define HUAWEI_PRODUCT_E1430 0x1430 +#define HUAWEI_PRODUCT_E1431 0x1431 +#define HUAWEI_PRODUCT_E1432 0x1432 +#define HUAWEI_PRODUCT_E1433 0x1433 +#define HUAWEI_PRODUCT_E1434 0x1434 +#define HUAWEI_PRODUCT_E1435 0x1435 +#define HUAWEI_PRODUCT_E1436 0x1436 +#define HUAWEI_PRODUCT_E1437 0x1437 +#define HUAWEI_PRODUCT_E1438 0x1438 +#define HUAWEI_PRODUCT_E1439 0x1439 +#define HUAWEI_PRODUCT_E143A 0x143A +#define HUAWEI_PRODUCT_E143B 0x143B +#define HUAWEI_PRODUCT_E143C 0x143C +#define HUAWEI_PRODUCT_E143D 0x143D +#define HUAWEI_PRODUCT_E143E 0x143E +#define HUAWEI_PRODUCT_E143F 0x143F #define NOVATELWIRELESS_VENDOR_ID 0x1410 @@ -207,6 +254,7 @@ static int option_send_setup(struct tty_struct *tty, struct usb_serial_port *po /* ZTE PRODUCTS */ #define ZTE_VENDOR_ID 0x19d2 #define ZTE_PRODUCT_MF628 0x0015 +#define ZTE_PRODUCT_MF626 0x0031 #define ZTE_PRODUCT_CDMA_TECH 0xfffe /* Ericsson products */ @@ -248,11 +296,20 @@ static struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E220, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E220BIS, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1401, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1402, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1403, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1404, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1405, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1406, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1407, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1408, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1409, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E140A, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E140B, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E140C, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E140D, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E140E, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E140F, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1410, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1411, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1412, 0xff, 0xff, 0xff) }, @@ -263,6 +320,44 @@ static struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1417, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1418, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1419, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E141A, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E141B, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E141C, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E141D, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E141E, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E141F, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1420, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1421, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1422, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1423, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1424, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1425, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1426, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1427, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1428, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1429, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E142A, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E142B, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E142C, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E142D, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E142E, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E142F, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1430, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1431, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1432, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1433, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1434, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1435, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1436, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1437, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1438, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1439, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E143A, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E143B, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E143C, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E143D, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E143E, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E143F, 0xff, 0xff, 0xff) }, { USB_DEVICE(AMOI_VENDOR_ID, AMOI_PRODUCT_9508) }, { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_V640) }, /* Novatel Merlin V640/XV620 */ { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_V620) }, /* Novatel Merlin V620/S620 */ @@ -336,6 +431,7 @@ static struct usb_device_id option_ids[] = { { USB_DEVICE(QUALCOMM_VENDOR_ID, 0x6613)}, /* Onda H600/ZTE MF330 */ { USB_DEVICE(MAXON_VENDOR_ID, 0x6280) }, /* BP3-USB & BP3-EXT HSDPA */ { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_UC864E) }, + { USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_MF626) }, { USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_MF628) }, { USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_CDMA_TECH) }, { USB_DEVICE(ERICSSON_VENDOR_ID, ERICSSON_PRODUCT_F3507G) }, diff --git a/drivers/usb/storage/initializers.c b/drivers/usb/storage/initializers.c index 4995bb595aef..2dd9bd4bff56 100644 --- a/drivers/usb/storage/initializers.c +++ b/drivers/usb/storage/initializers.c @@ -95,11 +95,10 @@ int usb_stor_huawei_e220_init(struct us_data *us) { int result; - us->iobuf[0] = 0x1; result = usb_stor_control_msg(us, us->send_ctrl_pipe, USB_REQ_SET_FEATURE, USB_TYPE_STANDARD | USB_RECIP_DEVICE, - 0x01, 0x0, us->iobuf, 0x1, 1000); + 0x01, 0x0, NULL, 0x0, 1000); US_DEBUGP("usb_control_msg performing result is %d\n", result); return (result ? 0 : -1); } diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index cd155475cb6e..a2b9ebbef38e 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -1628,97 +1628,332 @@ UNUSUAL_DEV( 0x1210, 0x0003, 0x0100, 0x0100, /* Reported by fangxiaozhi <huananhu@huawei.com> * This brings the HUAWEI data card devices into multi-port mode */ -UNUSUAL_DEV( 0x12d1, 0x1001, 0x0000, 0x0000, +UNUSUAL_DEV( 0x12d1, 0x1001, 0x0000, 0x0000, "HUAWEI MOBILE", "Mass Storage", US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, 0), -UNUSUAL_DEV( 0x12d1, 0x1003, 0x0000, 0x0000, +UNUSUAL_DEV( 0x12d1, 0x1003, 0x0000, 0x0000, "HUAWEI MOBILE", "Mass Storage", US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, 0), -UNUSUAL_DEV( 0x12d1, 0x1004, 0x0000, 0x0000, +UNUSUAL_DEV( 0x12d1, 0x1004, 0x0000, 0x0000, "HUAWEI MOBILE", "Mass Storage", US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, 0), -UNUSUAL_DEV( 0x12d1, 0x1401, 0x0000, 0x0000, +UNUSUAL_DEV( 0x12d1, 0x1401, 0x0000, 0x0000, "HUAWEI MOBILE", "Mass Storage", US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, 0), -UNUSUAL_DEV( 0x12d1, 0x1403, 0x0000, 0x0000, +UNUSUAL_DEV( 0x12d1, 0x1402, 0x0000, 0x0000, "HUAWEI MOBILE", "Mass Storage", US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, 0), -UNUSUAL_DEV( 0x12d1, 0x1405, 0x0000, 0x0000, +UNUSUAL_DEV( 0x12d1, 0x1403, 0x0000, 0x0000, "HUAWEI MOBILE", "Mass Storage", US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, 0), -UNUSUAL_DEV( 0x12d1, 0x1406, 0x0000, 0x0000, +UNUSUAL_DEV( 0x12d1, 0x1404, 0x0000, 0x0000, "HUAWEI MOBILE", "Mass Storage", US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, 0), -UNUSUAL_DEV( 0x12d1, 0x1408, 0x0000, 0x0000, +UNUSUAL_DEV( 0x12d1, 0x1405, 0x0000, 0x0000, "HUAWEI MOBILE", "Mass Storage", US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, 0), -UNUSUAL_DEV( 0x12d1, 0x1409, 0x0000, 0x0000, +UNUSUAL_DEV( 0x12d1, 0x1406, 0x0000, 0x0000, "HUAWEI MOBILE", "Mass Storage", US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, 0), -UNUSUAL_DEV( 0x12d1, 0x1410, 0x0000, 0x0000, +UNUSUAL_DEV( 0x12d1, 0x1407, 0x0000, 0x0000, "HUAWEI MOBILE", "Mass Storage", US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, 0), -UNUSUAL_DEV( 0x12d1, 0x1411, 0x0000, 0x0000, +UNUSUAL_DEV( 0x12d1, 0x1408, 0x0000, 0x0000, "HUAWEI MOBILE", "Mass Storage", US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, 0), -UNUSUAL_DEV( 0x12d1, 0x1412, 0x0000, 0x0000, +UNUSUAL_DEV( 0x12d1, 0x1409, 0x0000, 0x0000, "HUAWEI MOBILE", "Mass Storage", US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, 0), -UNUSUAL_DEV( 0x12d1, 0x1413, 0x0000, 0x0000, +UNUSUAL_DEV( 0x12d1, 0x140A, 0x0000, 0x0000, "HUAWEI MOBILE", "Mass Storage", US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, 0), -UNUSUAL_DEV( 0x12d1, 0x1414, 0x0000, 0x0000, +UNUSUAL_DEV( 0x12d1, 0x140B, 0x0000, 0x0000, "HUAWEI MOBILE", "Mass Storage", US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, 0), -UNUSUAL_DEV( 0x12d1, 0x1415, 0x0000, 0x0000, +UNUSUAL_DEV( 0x12d1, 0x140C, 0x0000, 0x0000, "HUAWEI MOBILE", "Mass Storage", US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, 0), -UNUSUAL_DEV( 0x12d1, 0x1416, 0x0000, 0x0000, +UNUSUAL_DEV( 0x12d1, 0x140D, 0x0000, 0x0000, "HUAWEI MOBILE", "Mass Storage", US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, 0), -UNUSUAL_DEV( 0x12d1, 0x1417, 0x0000, 0x0000, +UNUSUAL_DEV( 0x12d1, 0x140E, 0x0000, 0x0000, "HUAWEI MOBILE", "Mass Storage", US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, 0), -UNUSUAL_DEV( 0x12d1, 0x1418, 0x0000, 0x0000, +UNUSUAL_DEV( 0x12d1, 0x140F, 0x0000, 0x0000, "HUAWEI MOBILE", "Mass Storage", US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, 0), -UNUSUAL_DEV( 0x12d1, 0x1419, 0x0000, 0x0000, +UNUSUAL_DEV( 0x12d1, 0x1410, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x1411, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x1412, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x1413, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x1414, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x1415, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x1416, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x1417, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x1418, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x1419, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x141A, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x141B, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x141C, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x141D, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x141E, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x141F, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x1420, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x1421, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x1422, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x1423, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x1424, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x1425, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x1426, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x1427, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x1428, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x1429, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x142A, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x142B, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x142C, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x142D, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x142E, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x142F, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x1430, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x1431, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x1432, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x1433, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x1434, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x1435, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x1436, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x1437, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x1438, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x1439, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x143A, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x143B, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x143C, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x143D, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x143E, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x143F, 0x0000, 0x0000, "HUAWEI MOBILE", "Mass Storage", US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, @@ -1745,6 +1980,15 @@ UNUSUAL_DEV( 0x14cd, 0x6600, 0x0201, 0x0201, US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_IGNORE_RESIDUE ), +/* Reported by Alexandre Oliva <oliva@lsd.ic.unicamp.br> + * JMicron responds to USN and several other SCSI ioctls with a + * residue that causes subsequent I/O requests to fail. */ +UNUSUAL_DEV( 0x152d, 0x2329, 0x0100, 0x0100, + "JMicron", + "USB to ATA/ATAPI Bridge", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_IGNORE_RESIDUE ), + /* Reported by Robert Schedel <r.schedel@yahoo.de> * Note: this is a 'super top' device like the above 14cd/6600 device */ UNUSUAL_DEV( 0x1652, 0x6600, 0x0201, 0x0201, @@ -1818,6 +2062,15 @@ UNUSUAL_DEV( 0x2770, 0x915d, 0x0010, 0x0010, US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_CAPACITY ), +/* Reported by Frederic Marchal <frederic.marchal@wowcompany.com> + * Mio Moov 330 + */ +UNUSUAL_DEV( 0x3340, 0xffff, 0x0000, 0x0000, + "Mitac", + "Mio DigiWalker USB Sync", + US_SC_DEVICE,US_PR_DEVICE,NULL, + US_FL_MAX_SECTORS_64 ), + /* Reported by Andrey Rahmatullin <wrar@altlinux.org> */ UNUSUAL_DEV( 0x4102, 0x1020, 0x0100, 0x0100, "iRiver", diff --git a/drivers/usb/wusbcore/Kconfig b/drivers/usb/wusbcore/Kconfig new file mode 100644 index 000000000000..eb09a0a14a80 --- /dev/null +++ b/drivers/usb/wusbcore/Kconfig @@ -0,0 +1,41 @@ +# +# Wireless USB Core configuration +# +config USB_WUSB + tristate "Enable Wireless USB extensions (EXPERIMENTAL)" + depends on EXPERIMENTAL + depends on USB + select UWB + select CRYPTO + select CRYPTO_BLKCIPHER + select CRYPTO_CBC + select CRYPTO_MANAGER + select CRYPTO_AES + help + Enable the host-side support for Wireless USB. + + To compile this support select Y (built in). It is safe to + select even if you don't have the hardware. + +config USB_WUSB_CBAF + tristate "Support WUSB Cable Based Association (CBA)" + depends on USB + help + Some WUSB devices support Cable Based Association. It's used to + enable the secure communication between the host and the + device. + + Enable this option if your WUSB device must to be connected + via wired USB before establishing a wireless link. + + It is safe to select even if you don't have a compatible + hardware. + +config USB_WUSB_CBAF_DEBUG + bool "Enable CBA debug messages" + depends on USB_WUSB_CBAF + help + Say Y here if you want the CBA to produce a bunch of debug messages + to the system log. Select this if you are having a problem with + CBA support and want to see more of what is going on. + diff --git a/drivers/usb/wusbcore/Makefile b/drivers/usb/wusbcore/Makefile new file mode 100644 index 000000000000..75f1ade66258 --- /dev/null +++ b/drivers/usb/wusbcore/Makefile @@ -0,0 +1,26 @@ +obj-$(CONFIG_USB_WUSB) += wusbcore.o +obj-$(CONFIG_USB_HWA_HCD) += wusb-wa.o +obj-$(CONFIG_USB_WUSB_CBAF) += wusb-cbaf.o + + +wusbcore-objs := \ + crypto.o \ + devconnect.o \ + dev-sysfs.o \ + mmc.o \ + pal.o \ + rh.o \ + reservation.o \ + security.o \ + wusbhc.o + +wusb-cbaf-objs := cbaf.o + +wusb-wa-objs := wa-hc.o \ + wa-nep.o \ + wa-rpipe.o \ + wa-xfer.o + +ifeq ($(CONFIG_USB_WUSB_CBAF_DEBUG),y) +EXTRA_CFLAGS += -DDEBUG +endif diff --git a/drivers/usb/wusbcore/cbaf.c b/drivers/usb/wusbcore/cbaf.c new file mode 100644 index 000000000000..ab4788d1785a --- /dev/null +++ b/drivers/usb/wusbcore/cbaf.c @@ -0,0 +1,673 @@ +/* + * Wireless USB - Cable Based Association + * + * + * Copyright (C) 2006 Intel Corporation + * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> + * Copyright (C) 2008 Cambridge Silicon Radio Ltd. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + * + * + * WUSB devices have to be paired (associated in WUSB lingo) so + * that they can connect to the system. + * + * One way of pairing is using CBA-Cable Based Association. First + * time you plug the device with a cable, association is done between + * host and device and subsequent times, you can connect wirelessly + * without having to associate again. That's the idea. + * + * This driver does nothing Earth shattering. It just provides an + * interface to chat with the wire-connected device so we can get a + * CDID (device ID) that might have been previously associated to a + * CHID (host ID) and to set up a new <CHID,CDID,CK> triplet + * (connection context), with the CK being the secret, or connection + * key. This is the pairing data. + * + * When a device with the CBA capability connects, the probe routine + * just creates a bunch of sysfs files that a user space enumeration + * manager uses to allow it to connect wirelessly to the system or not. + * + * The process goes like this: + * + * 1. Device plugs, cbaf is loaded, notifications happen. + * + * 2. The connection manager (CM) sees a device with CBAF capability + * (the wusb_chid etc. files in /sys/devices/blah/OURDEVICE). + * + * 3. The CM writes the host name, supported band groups, and the CHID + * (host ID) into the wusb_host_name, wusb_host_band_groups and + * wusb_chid files. These get sent to the device and the CDID (if + * any) for this host is requested. + * + * 4. The CM can verify that the device's supported band groups + * (wusb_device_band_groups) are compatible with the host. + * + * 5. The CM reads the wusb_cdid file. + * + * 6. The CM looks up its database + * + * 6.1 If it has a matching CHID,CDID entry, the device has been + * authorized before (paired) and nothing further needs to be + * done. + * + * 6.2 If the CDID is zero (or the CM doesn't find a matching CDID in + * its database), the device is assumed to be not known. The CM + * may associate the host with device by: writing a randomly + * generated CDID to wusb_cdid and then a random CK to wusb_ck + * (this uploads the new CC to the device). + * + * CMD may choose to prompt the user before associating with a new + * device. + * + * 7. Device is unplugged. + * + * When the device tries to connect wirelessly, it will present its + * CDID to the WUSB host controller. The CM will query the + * database. If the CHID/CDID pair found, it will (with a 4-way + * handshake) challenge the device to demonstrate it has the CK secret + * key (from our database) without actually exchanging it. Once + * satisfied, crypto keys are derived from the CK, the device is + * connected and all communication is encrypted. + * + * References: + * [WUSB-AM] Association Models Supplement to the Certified Wireless + * Universal Serial Bus Specification, version 1.0. + */ +#include <linux/module.h> +#include <linux/ctype.h> +#include <linux/version.h> +#include <linux/usb.h> +#include <linux/interrupt.h> +#include <linux/delay.h> +#include <linux/random.h> +#include <linux/mutex.h> +#include <linux/uwb.h> +#include <linux/usb/wusb.h> +#include <linux/usb/association.h> + +#define CBA_NAME_LEN 0x40 /* [WUSB-AM] table 4-7 */ + +/* An instance of a Cable-Based-Association-Framework device */ +struct cbaf { + struct usb_device *usb_dev; + struct usb_interface *usb_iface; + void *buffer; + size_t buffer_size; + + struct wusb_ckhdid chid; + char host_name[CBA_NAME_LEN]; + u16 host_band_groups; + + struct wusb_ckhdid cdid; + char device_name[CBA_NAME_LEN]; + u16 device_band_groups; + + struct wusb_ckhdid ck; +}; + +/* + * Verify that a CBAF USB-interface has what we need + * + * According to [WUSB-AM], CBA devices should provide at least two + * interfaces: + * - RETRIEVE_HOST_INFO + * - ASSOCIATE + * + * If the device doesn't provide these interfaces, we do not know how + * to deal with it. + */ +static int cbaf_check(struct cbaf *cbaf) +{ + int result; + struct device *dev = &cbaf->usb_iface->dev; + struct wusb_cbaf_assoc_info *assoc_info; + struct wusb_cbaf_assoc_request *assoc_request; + size_t assoc_size; + void *itr, *top; + int ar_rhi = 0, ar_assoc = 0; + + result = usb_control_msg( + cbaf->usb_dev, usb_rcvctrlpipe(cbaf->usb_dev, 0), + CBAF_REQ_GET_ASSOCIATION_INFORMATION, + USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE, + 0, cbaf->usb_iface->cur_altsetting->desc.bInterfaceNumber, + cbaf->buffer, cbaf->buffer_size, 1000 /* FIXME: arbitrary */); + if (result < 0) { + dev_err(dev, "Cannot get available association types: %d\n", + result); + return result; + } + + assoc_info = cbaf->buffer; + if (result < sizeof(*assoc_info)) { + dev_err(dev, "Not enough data to decode association info " + "header (%zu vs %zu bytes required)\n", + (size_t)result, sizeof(*assoc_info)); + return result; + } + + assoc_size = le16_to_cpu(assoc_info->Length); + if (result < assoc_size) { + dev_err(dev, "Not enough data to decode association info " + "(%zu vs %zu bytes required)\n", + (size_t)assoc_size, sizeof(*assoc_info)); + return result; + } + /* + * From now on, we just verify, but won't error out unless we + * don't find the AR_TYPE_WUSB_{RETRIEVE_HOST_INFO,ASSOCIATE} + * types. + */ + itr = cbaf->buffer + sizeof(*assoc_info); + top = cbaf->buffer + assoc_size; + dev_dbg(dev, "Found %u association requests (%zu bytes)\n", + assoc_info->NumAssociationRequests, assoc_size); + + while (itr < top) { + u16 ar_type, ar_subtype; + u32 ar_size; + const char *ar_name; + + assoc_request = itr; + + if (top - itr < sizeof(*assoc_request)) { + dev_err(dev, "Not enough data to decode associaton " + "request (%zu vs %zu bytes needed)\n", + top - itr, sizeof(*assoc_request)); + break; + } + + ar_type = le16_to_cpu(assoc_request->AssociationTypeId); + ar_subtype = le16_to_cpu(assoc_request->AssociationSubTypeId); + ar_size = le32_to_cpu(assoc_request->AssociationTypeInfoSize); + ar_name = "unknown"; + + switch (ar_type) { + case AR_TYPE_WUSB: + /* Verify we have what is mandated by [WUSB-AM]. */ + switch (ar_subtype) { + case AR_TYPE_WUSB_RETRIEVE_HOST_INFO: + ar_name = "RETRIEVE_HOST_INFO"; + ar_rhi = 1; + break; + case AR_TYPE_WUSB_ASSOCIATE: + /* send assoc data */ + ar_name = "ASSOCIATE"; + ar_assoc = 1; + break; + }; + break; + }; + + dev_dbg(dev, "Association request #%02u: 0x%04x/%04x " + "(%zu bytes): %s\n", + assoc_request->AssociationDataIndex, ar_type, + ar_subtype, (size_t)ar_size, ar_name); + + itr += sizeof(*assoc_request); + } + + if (!ar_rhi) { + dev_err(dev, "Missing RETRIEVE_HOST_INFO association " + "request\n"); + return -EINVAL; + } + if (!ar_assoc) { + dev_err(dev, "Missing ASSOCIATE association request\n"); + return -EINVAL; + } + + return 0; +} + +static const struct wusb_cbaf_host_info cbaf_host_info_defaults = { + .AssociationTypeId_hdr = WUSB_AR_AssociationTypeId, + .AssociationTypeId = cpu_to_le16(AR_TYPE_WUSB), + .AssociationSubTypeId_hdr = WUSB_AR_AssociationSubTypeId, + .AssociationSubTypeId = cpu_to_le16(AR_TYPE_WUSB_RETRIEVE_HOST_INFO), + .CHID_hdr = WUSB_AR_CHID, + .LangID_hdr = WUSB_AR_LangID, + .HostFriendlyName_hdr = WUSB_AR_HostFriendlyName, +}; + +/* Send WUSB host information (CHID and name) to a CBAF device */ +static int cbaf_send_host_info(struct cbaf *cbaf) +{ + struct wusb_cbaf_host_info *hi; + size_t name_len; + size_t hi_size; + + hi = cbaf->buffer; + memset(hi, 0, sizeof(*hi)); + *hi = cbaf_host_info_defaults; + hi->CHID = cbaf->chid; + hi->LangID = 0; /* FIXME: I guess... */ + strlcpy(hi->HostFriendlyName, cbaf->host_name, CBA_NAME_LEN); + name_len = strlen(cbaf->host_name); + hi->HostFriendlyName_hdr.len = cpu_to_le16(name_len); + hi_size = sizeof(*hi) + name_len; + + return usb_control_msg(cbaf->usb_dev, usb_sndctrlpipe(cbaf->usb_dev, 0), + CBAF_REQ_SET_ASSOCIATION_RESPONSE, + USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE, + 0x0101, + cbaf->usb_iface->cur_altsetting->desc.bInterfaceNumber, + hi, hi_size, 1000 /* FIXME: arbitrary */); +} + +/* + * Get device's information (CDID) associated to CHID + * + * The device will return it's information (CDID, name, bandgroups) + * associated to the CHID we have set before, or 0 CDID and default + * name and bandgroup if no CHID set or unknown. + */ +static int cbaf_cdid_get(struct cbaf *cbaf) +{ + int result; + struct device *dev = &cbaf->usb_iface->dev; + struct wusb_cbaf_device_info *di; + size_t needed; + + di = cbaf->buffer; + result = usb_control_msg( + cbaf->usb_dev, usb_rcvctrlpipe(cbaf->usb_dev, 0), + CBAF_REQ_GET_ASSOCIATION_REQUEST, + USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE, + 0x0200, cbaf->usb_iface->cur_altsetting->desc.bInterfaceNumber, + di, cbaf->buffer_size, 1000 /* FIXME: arbitrary */); + if (result < 0) { + dev_err(dev, "Cannot request device information: %d\n", result); + return result; + } + + needed = result < sizeof(*di) ? sizeof(*di) : le32_to_cpu(di->Length); + if (result < needed) { + dev_err(dev, "Not enough data in DEVICE_INFO reply (%zu vs " + "%zu bytes needed)\n", (size_t)result, needed); + return result; + } + + strlcpy(cbaf->device_name, di->DeviceFriendlyName, CBA_NAME_LEN); + cbaf->cdid = di->CDID; + cbaf->device_band_groups = le16_to_cpu(di->BandGroups); + + return 0; +} + +static ssize_t cbaf_wusb_chid_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct usb_interface *iface = to_usb_interface(dev); + struct cbaf *cbaf = usb_get_intfdata(iface); + char pr_chid[WUSB_CKHDID_STRSIZE]; + + ckhdid_printf(pr_chid, sizeof(pr_chid), &cbaf->chid); + return scnprintf(buf, PAGE_SIZE, "%s\n", pr_chid); +} + +static ssize_t cbaf_wusb_chid_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t size) +{ + ssize_t result; + struct usb_interface *iface = to_usb_interface(dev); + struct cbaf *cbaf = usb_get_intfdata(iface); + + result = sscanf(buf, + "%02hhx %02hhx %02hhx %02hhx " + "%02hhx %02hhx %02hhx %02hhx " + "%02hhx %02hhx %02hhx %02hhx " + "%02hhx %02hhx %02hhx %02hhx", + &cbaf->chid.data[0] , &cbaf->chid.data[1], + &cbaf->chid.data[2] , &cbaf->chid.data[3], + &cbaf->chid.data[4] , &cbaf->chid.data[5], + &cbaf->chid.data[6] , &cbaf->chid.data[7], + &cbaf->chid.data[8] , &cbaf->chid.data[9], + &cbaf->chid.data[10], &cbaf->chid.data[11], + &cbaf->chid.data[12], &cbaf->chid.data[13], + &cbaf->chid.data[14], &cbaf->chid.data[15]); + + if (result != 16) + return -EINVAL; + + result = cbaf_send_host_info(cbaf); + if (result < 0) + return result; + result = cbaf_cdid_get(cbaf); + if (result < 0) + return -result; + return size; +} +static DEVICE_ATTR(wusb_chid, 0600, cbaf_wusb_chid_show, cbaf_wusb_chid_store); + +static ssize_t cbaf_wusb_host_name_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct usb_interface *iface = to_usb_interface(dev); + struct cbaf *cbaf = usb_get_intfdata(iface); + + return scnprintf(buf, PAGE_SIZE, "%s\n", cbaf->host_name); +} + +static ssize_t cbaf_wusb_host_name_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t size) +{ + ssize_t result; + struct usb_interface *iface = to_usb_interface(dev); + struct cbaf *cbaf = usb_get_intfdata(iface); + + result = sscanf(buf, "%63s", cbaf->host_name); + if (result != 1) + return -EINVAL; + + return size; +} +static DEVICE_ATTR(wusb_host_name, 0600, cbaf_wusb_host_name_show, + cbaf_wusb_host_name_store); + +static ssize_t cbaf_wusb_host_band_groups_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct usb_interface *iface = to_usb_interface(dev); + struct cbaf *cbaf = usb_get_intfdata(iface); + + return scnprintf(buf, PAGE_SIZE, "0x%04x\n", cbaf->host_band_groups); +} + +static ssize_t cbaf_wusb_host_band_groups_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t size) +{ + ssize_t result; + struct usb_interface *iface = to_usb_interface(dev); + struct cbaf *cbaf = usb_get_intfdata(iface); + u16 band_groups = 0; + + result = sscanf(buf, "%04hx", &band_groups); + if (result != 1) + return -EINVAL; + + cbaf->host_band_groups = band_groups; + + return size; +} + +static DEVICE_ATTR(wusb_host_band_groups, 0600, + cbaf_wusb_host_band_groups_show, + cbaf_wusb_host_band_groups_store); + +static const struct wusb_cbaf_device_info cbaf_device_info_defaults = { + .Length_hdr = WUSB_AR_Length, + .CDID_hdr = WUSB_AR_CDID, + .BandGroups_hdr = WUSB_AR_BandGroups, + .LangID_hdr = WUSB_AR_LangID, + .DeviceFriendlyName_hdr = WUSB_AR_DeviceFriendlyName, +}; + +static ssize_t cbaf_wusb_cdid_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct usb_interface *iface = to_usb_interface(dev); + struct cbaf *cbaf = usb_get_intfdata(iface); + char pr_cdid[WUSB_CKHDID_STRSIZE]; + + ckhdid_printf(pr_cdid, sizeof(pr_cdid), &cbaf->cdid); + return scnprintf(buf, PAGE_SIZE, "%s\n", pr_cdid); +} + +static ssize_t cbaf_wusb_cdid_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t size) +{ + ssize_t result; + struct usb_interface *iface = to_usb_interface(dev); + struct cbaf *cbaf = usb_get_intfdata(iface); + struct wusb_ckhdid cdid; + + result = sscanf(buf, + "%02hhx %02hhx %02hhx %02hhx " + "%02hhx %02hhx %02hhx %02hhx " + "%02hhx %02hhx %02hhx %02hhx " + "%02hhx %02hhx %02hhx %02hhx", + &cdid.data[0] , &cdid.data[1], + &cdid.data[2] , &cdid.data[3], + &cdid.data[4] , &cdid.data[5], + &cdid.data[6] , &cdid.data[7], + &cdid.data[8] , &cdid.data[9], + &cdid.data[10], &cdid.data[11], + &cdid.data[12], &cdid.data[13], + &cdid.data[14], &cdid.data[15]); + if (result != 16) + return -EINVAL; + + cbaf->cdid = cdid; + + return size; +} +static DEVICE_ATTR(wusb_cdid, 0600, cbaf_wusb_cdid_show, cbaf_wusb_cdid_store); + +static ssize_t cbaf_wusb_device_band_groups_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct usb_interface *iface = to_usb_interface(dev); + struct cbaf *cbaf = usb_get_intfdata(iface); + + return scnprintf(buf, PAGE_SIZE, "0x%04x\n", cbaf->device_band_groups); +} + +static DEVICE_ATTR(wusb_device_band_groups, 0600, + cbaf_wusb_device_band_groups_show, + NULL); + +static ssize_t cbaf_wusb_device_name_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct usb_interface *iface = to_usb_interface(dev); + struct cbaf *cbaf = usb_get_intfdata(iface); + + return scnprintf(buf, PAGE_SIZE, "%s\n", cbaf->device_name); +} +static DEVICE_ATTR(wusb_device_name, 0600, cbaf_wusb_device_name_show, NULL); + +static const struct wusb_cbaf_cc_data cbaf_cc_data_defaults = { + .AssociationTypeId_hdr = WUSB_AR_AssociationTypeId, + .AssociationTypeId = cpu_to_le16(AR_TYPE_WUSB), + .AssociationSubTypeId_hdr = WUSB_AR_AssociationSubTypeId, + .AssociationSubTypeId = cpu_to_le16(AR_TYPE_WUSB_ASSOCIATE), + .Length_hdr = WUSB_AR_Length, + .Length = cpu_to_le32(sizeof(struct wusb_cbaf_cc_data)), + .ConnectionContext_hdr = WUSB_AR_ConnectionContext, + .BandGroups_hdr = WUSB_AR_BandGroups, +}; + +static const struct wusb_cbaf_cc_data_fail cbaf_cc_data_fail_defaults = { + .AssociationTypeId_hdr = WUSB_AR_AssociationTypeId, + .AssociationSubTypeId_hdr = WUSB_AR_AssociationSubTypeId, + .Length_hdr = WUSB_AR_Length, + .AssociationStatus_hdr = WUSB_AR_AssociationStatus, +}; + +/* + * Send a new CC to the device. + */ +static int cbaf_cc_upload(struct cbaf *cbaf) +{ + int result; + struct device *dev = &cbaf->usb_iface->dev; + struct wusb_cbaf_cc_data *ccd; + char pr_cdid[WUSB_CKHDID_STRSIZE]; + + ccd = cbaf->buffer; + *ccd = cbaf_cc_data_defaults; + ccd->CHID = cbaf->chid; + ccd->CDID = cbaf->cdid; + ccd->CK = cbaf->ck; + ccd->BandGroups = cpu_to_le16(cbaf->host_band_groups); + + dev_dbg(dev, "Trying to upload CC:\n"); + ckhdid_printf(pr_cdid, sizeof(pr_cdid), &ccd->CHID); + dev_dbg(dev, " CHID %s\n", pr_cdid); + ckhdid_printf(pr_cdid, sizeof(pr_cdid), &ccd->CDID); + dev_dbg(dev, " CDID %s\n", pr_cdid); + dev_dbg(dev, " Bandgroups 0x%04x\n", cbaf->host_band_groups); + + result = usb_control_msg( + cbaf->usb_dev, usb_sndctrlpipe(cbaf->usb_dev, 0), + CBAF_REQ_SET_ASSOCIATION_RESPONSE, + USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE, + 0x0201, cbaf->usb_iface->cur_altsetting->desc.bInterfaceNumber, + ccd, sizeof(*ccd), 1000 /* FIXME: arbitrary */); + + return result; +} + +static ssize_t cbaf_wusb_ck_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t size) +{ + ssize_t result; + struct usb_interface *iface = to_usb_interface(dev); + struct cbaf *cbaf = usb_get_intfdata(iface); + + result = sscanf(buf, + "%02hhx %02hhx %02hhx %02hhx " + "%02hhx %02hhx %02hhx %02hhx " + "%02hhx %02hhx %02hhx %02hhx " + "%02hhx %02hhx %02hhx %02hhx", + &cbaf->ck.data[0] , &cbaf->ck.data[1], + &cbaf->ck.data[2] , &cbaf->ck.data[3], + &cbaf->ck.data[4] , &cbaf->ck.data[5], + &cbaf->ck.data[6] , &cbaf->ck.data[7], + &cbaf->ck.data[8] , &cbaf->ck.data[9], + &cbaf->ck.data[10], &cbaf->ck.data[11], + &cbaf->ck.data[12], &cbaf->ck.data[13], + &cbaf->ck.data[14], &cbaf->ck.data[15]); + if (result != 16) + return -EINVAL; + + result = cbaf_cc_upload(cbaf); + if (result < 0) + return result; + + return size; +} +static DEVICE_ATTR(wusb_ck, 0600, NULL, cbaf_wusb_ck_store); + +static struct attribute *cbaf_dev_attrs[] = { + &dev_attr_wusb_host_name.attr, + &dev_attr_wusb_host_band_groups.attr, + &dev_attr_wusb_chid.attr, + &dev_attr_wusb_cdid.attr, + &dev_attr_wusb_device_name.attr, + &dev_attr_wusb_device_band_groups.attr, + &dev_attr_wusb_ck.attr, + NULL, +}; + +static struct attribute_group cbaf_dev_attr_group = { + .name = NULL, /* we want them in the same directory */ + .attrs = cbaf_dev_attrs, +}; + +static int cbaf_probe(struct usb_interface *iface, + const struct usb_device_id *id) +{ + struct cbaf *cbaf; + struct device *dev = &iface->dev; + int result = -ENOMEM; + + cbaf = kzalloc(sizeof(*cbaf), GFP_KERNEL); + if (cbaf == NULL) + goto error_kzalloc; + cbaf->buffer = kmalloc(512, GFP_KERNEL); + if (cbaf->buffer == NULL) + goto error_kmalloc_buffer; + + cbaf->buffer_size = 512; + cbaf->usb_dev = usb_get_dev(interface_to_usbdev(iface)); + cbaf->usb_iface = usb_get_intf(iface); + result = cbaf_check(cbaf); + if (result < 0) { + dev_err(dev, "This device is not WUSB-CBAF compliant" + "and is not supported yet.\n"); + goto error_check; + } + + result = sysfs_create_group(&dev->kobj, &cbaf_dev_attr_group); + if (result < 0) { + dev_err(dev, "Can't register sysfs attr group: %d\n", result); + goto error_create_group; + } + usb_set_intfdata(iface, cbaf); + return 0; + +error_create_group: +error_check: + kfree(cbaf->buffer); +error_kmalloc_buffer: + kfree(cbaf); +error_kzalloc: + return result; +} + +static void cbaf_disconnect(struct usb_interface *iface) +{ + struct cbaf *cbaf = usb_get_intfdata(iface); + struct device *dev = &iface->dev; + sysfs_remove_group(&dev->kobj, &cbaf_dev_attr_group); + usb_set_intfdata(iface, NULL); + usb_put_intf(iface); + kfree(cbaf->buffer); + /* paranoia: clean up crypto keys */ + memset(cbaf, 0, sizeof(*cbaf)); + kfree(cbaf); +} + +static struct usb_device_id cbaf_id_table[] = { + { USB_INTERFACE_INFO(0xef, 0x03, 0x01), }, + { }, +}; +MODULE_DEVICE_TABLE(usb, cbaf_id_table); + +static struct usb_driver cbaf_driver = { + .name = "wusb-cbaf", + .id_table = cbaf_id_table, + .probe = cbaf_probe, + .disconnect = cbaf_disconnect, +}; + +static int __init cbaf_driver_init(void) +{ + return usb_register(&cbaf_driver); +} +module_init(cbaf_driver_init); + +static void __exit cbaf_driver_exit(void) +{ + usb_deregister(&cbaf_driver); +} +module_exit(cbaf_driver_exit); + +MODULE_AUTHOR("Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>"); +MODULE_DESCRIPTION("Wireless USB Cable Based Association"); +MODULE_LICENSE("GPL"); diff --git a/drivers/usb/wusbcore/crypto.c b/drivers/usb/wusbcore/crypto.c new file mode 100644 index 000000000000..c36c4389baae --- /dev/null +++ b/drivers/usb/wusbcore/crypto.c @@ -0,0 +1,538 @@ +/* + * Ultra Wide Band + * AES-128 CCM Encryption + * + * Copyright (C) 2007 Intel Corporation + * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + * + * + * We don't do any encryption here; we use the Linux Kernel's AES-128 + * crypto modules to construct keys and payload blocks in a way + * defined by WUSB1.0[6]. Check the erratas, as typos are are patched + * there. + * + * Thanks a zillion to John Keys for his help and clarifications over + * the designed-by-a-committee text. + * + * So the idea is that there is this basic Pseudo-Random-Function + * defined in WUSB1.0[6.5] which is the core of everything. It works + * by tweaking some blocks, AES crypting them and then xoring + * something else with them (this seems to be called CBC(AES) -- can + * you tell I know jack about crypto?). So we just funnel it into the + * Linux Crypto API. + * + * We leave a crypto test module so we can verify that vectors match, + * every now and then. + * + * Block size: 16 bytes -- AES seems to do things in 'block sizes'. I + * am learning a lot... + * + * Conveniently, some data structures that need to be + * funneled through AES are...16 bytes in size! + */ + +#include <linux/crypto.h> +#include <linux/module.h> +#include <linux/err.h> +#include <linux/uwb.h> +#include <linux/usb/wusb.h> +#include <linux/scatterlist.h> +#define D_LOCAL 0 +#include <linux/uwb/debug.h> + + +/* + * Block of data, as understood by AES-CCM + * + * The code assumes this structure is nothing but a 16 byte array + * (packed in a struct to avoid common mess ups that I usually do with + * arrays and enforcing type checking). + */ +struct aes_ccm_block { + u8 data[16]; +} __attribute__((packed)); + +/* + * Counter-mode Blocks (WUSB1.0[6.4]) + * + * According to CCM (or so it seems), for the purpose of calculating + * the MIC, the message is broken in N counter-mode blocks, B0, B1, + * ... BN. + * + * B0 contains flags, the CCM nonce and l(m). + * + * B1 contains l(a), the MAC header, the encryption offset and padding. + * + * If EO is nonzero, additional blocks are built from payload bytes + * until EO is exahusted (FIXME: padding to 16 bytes, I guess). The + * padding is not xmitted. + */ + +/* WUSB1.0[T6.4] */ +struct aes_ccm_b0 { + u8 flags; /* 0x59, per CCM spec */ + struct aes_ccm_nonce ccm_nonce; + __be16 lm; +} __attribute__((packed)); + +/* WUSB1.0[T6.5] */ +struct aes_ccm_b1 { + __be16 la; + u8 mac_header[10]; + __le16 eo; + u8 security_reserved; /* This is always zero */ + u8 padding; /* 0 */ +} __attribute__((packed)); + +/* + * Encryption Blocks (WUSB1.0[6.4.4]) + * + * CCM uses Ax blocks to generate a keystream with which the MIC and + * the message's payload are encoded. A0 always encrypts/decrypts the + * MIC. Ax (x>0) are used for the sucesive payload blocks. + * + * The x is the counter, and is increased for each block. + */ +struct aes_ccm_a { + u8 flags; /* 0x01, per CCM spec */ + struct aes_ccm_nonce ccm_nonce; + __be16 counter; /* Value of x */ +} __attribute__((packed)); + +static void bytewise_xor(void *_bo, const void *_bi1, const void *_bi2, + size_t size) +{ + u8 *bo = _bo; + const u8 *bi1 = _bi1, *bi2 = _bi2; + size_t itr; + for (itr = 0; itr < size; itr++) + bo[itr] = bi1[itr] ^ bi2[itr]; +} + +/* + * CC-MAC function WUSB1.0[6.5] + * + * Take a data string and produce the encrypted CBC Counter-mode MIC + * + * Note the names for most function arguments are made to (more or + * less) match those used in the pseudo-function definition given in + * WUSB1.0[6.5]. + * + * @tfm_cbc: CBC(AES) blkcipher handle (initialized) + * + * @tfm_aes: AES cipher handle (initialized) + * + * @mic: buffer for placing the computed MIC (Message Integrity + * Code). This is exactly 8 bytes, and we expect the buffer to + * be at least eight bytes in length. + * + * @key: 128 bit symmetric key + * + * @n: CCM nonce + * + * @a: ASCII string, 14 bytes long (I guess zero padded if needed; + * we use exactly 14 bytes). + * + * @b: data stream to be processed; cannot be a global or const local + * (will confuse the scatterlists) + * + * @blen: size of b... + * + * Still not very clear how this is done, but looks like this: we + * create block B0 (as WUSB1.0[6.5] says), then we AES-crypt it with + * @key. We bytewise xor B0 with B1 (1) and AES-crypt that. Then we + * take the payload and divide it in blocks (16 bytes), xor them with + * the previous crypto result (16 bytes) and crypt it, repeat the next + * block with the output of the previous one, rinse wash (I guess this + * is what AES CBC mode means...but I truly have no idea). So we use + * the CBC(AES) blkcipher, that does precisely that. The IV (Initial + * Vector) is 16 bytes and is set to zero, so + * + * See rfc3610. Linux crypto has a CBC implementation, but the + * documentation is scarce, to say the least, and the example code is + * so intricated that is difficult to understand how things work. Most + * of this is guess work -- bite me. + * + * (1) Created as 6.5 says, again, using as l(a) 'Blen + 14', and + * using the 14 bytes of @a to fill up + * b1.{mac_header,e0,security_reserved,padding}. + * + * NOTE: The definiton of l(a) in WUSB1.0[6.5] vs the definition of + * l(m) is orthogonal, they bear no relationship, so it is not + * in conflict with the parameter's relation that + * WUSB1.0[6.4.2]) defines. + * + * NOTE: WUSB1.0[A.1]: Host Nonce is missing a nibble? (1e); fixed in + * first errata released on 2005/07. + * + * NOTE: we need to clean IV to zero at each invocation to make sure + * we start with a fresh empty Initial Vector, so that the CBC + * works ok. + * + * NOTE: blen is not aligned to a block size, we'll pad zeros, that's + * what sg[4] is for. Maybe there is a smarter way to do this. + */ +static int wusb_ccm_mac(struct crypto_blkcipher *tfm_cbc, + struct crypto_cipher *tfm_aes, void *mic, + const struct aes_ccm_nonce *n, + const struct aes_ccm_label *a, const void *b, + size_t blen) +{ + int result = 0; + struct blkcipher_desc desc; + struct aes_ccm_b0 b0; + struct aes_ccm_b1 b1; + struct aes_ccm_a ax; + struct scatterlist sg[4], sg_dst; + void *iv, *dst_buf; + size_t ivsize, dst_size; + const u8 bzero[16] = { 0 }; + size_t zero_padding; + + d_fnstart(3, NULL, "(tfm_cbc %p, tfm_aes %p, mic %p, " + "n %p, a %p, b %p, blen %zu)\n", + tfm_cbc, tfm_aes, mic, n, a, b, blen); + /* + * These checks should be compile time optimized out + * ensure @a fills b1's mac_header and following fields + */ + WARN_ON(sizeof(*a) != sizeof(b1) - sizeof(b1.la)); + WARN_ON(sizeof(b0) != sizeof(struct aes_ccm_block)); + WARN_ON(sizeof(b1) != sizeof(struct aes_ccm_block)); + WARN_ON(sizeof(ax) != sizeof(struct aes_ccm_block)); + + result = -ENOMEM; + zero_padding = sizeof(struct aes_ccm_block) + - blen % sizeof(struct aes_ccm_block); + zero_padding = blen % sizeof(struct aes_ccm_block); + if (zero_padding) + zero_padding = sizeof(struct aes_ccm_block) - zero_padding; + dst_size = blen + sizeof(b0) + sizeof(b1) + zero_padding; + dst_buf = kzalloc(dst_size, GFP_KERNEL); + if (dst_buf == NULL) { + printk(KERN_ERR "E: can't alloc destination buffer\n"); + goto error_dst_buf; + } + + iv = crypto_blkcipher_crt(tfm_cbc)->iv; + ivsize = crypto_blkcipher_ivsize(tfm_cbc); + memset(iv, 0, ivsize); + + /* Setup B0 */ + b0.flags = 0x59; /* Format B0 */ + b0.ccm_nonce = *n; + b0.lm = cpu_to_be16(0); /* WUSB1.0[6.5] sez l(m) is 0 */ + + /* Setup B1 + * + * The WUSB spec is anything but clear! WUSB1.0[6.5] + * says that to initialize B1 from A with 'l(a) = blen + + * 14'--after clarification, it means to use A's contents + * for MAC Header, EO, sec reserved and padding. + */ + b1.la = cpu_to_be16(blen + 14); + memcpy(&b1.mac_header, a, sizeof(*a)); + + d_printf(4, NULL, "I: B0 (%zu bytes)\n", sizeof(b0)); + d_dump(4, NULL, &b0, sizeof(b0)); + d_printf(4, NULL, "I: B1 (%zu bytes)\n", sizeof(b1)); + d_dump(4, NULL, &b1, sizeof(b1)); + d_printf(4, NULL, "I: B (%zu bytes)\n", blen); + d_dump(4, NULL, b, blen); + d_printf(4, NULL, "I: B 0-padding (%zu bytes)\n", zero_padding); + d_printf(4, NULL, "D: IV before crypto (%zu)\n", ivsize); + d_dump(4, NULL, iv, ivsize); + + sg_init_table(sg, ARRAY_SIZE(sg)); + sg_set_buf(&sg[0], &b0, sizeof(b0)); + sg_set_buf(&sg[1], &b1, sizeof(b1)); + sg_set_buf(&sg[2], b, blen); + /* 0 if well behaved :) */ + sg_set_buf(&sg[3], bzero, zero_padding); + sg_init_one(&sg_dst, dst_buf, dst_size); + + desc.tfm = tfm_cbc; + desc.flags = 0; + result = crypto_blkcipher_encrypt(&desc, &sg_dst, sg, dst_size); + if (result < 0) { + printk(KERN_ERR "E: can't compute CBC-MAC tag (MIC): %d\n", + result); + goto error_cbc_crypt; + } + d_printf(4, NULL, "D: MIC tag\n"); + d_dump(4, NULL, iv, ivsize); + + /* Now we crypt the MIC Tag (*iv) with Ax -- values per WUSB1.0[6.5] + * The procedure is to AES crypt the A0 block and XOR the MIC + * Tag agains it; we only do the first 8 bytes and place it + * directly in the destination buffer. + * + * POS Crypto API: size is assumed to be AES's block size. + * Thanks for documenting it -- tip taken from airo.c + */ + ax.flags = 0x01; /* as per WUSB 1.0 spec */ + ax.ccm_nonce = *n; + ax.counter = 0; + crypto_cipher_encrypt_one(tfm_aes, (void *)&ax, (void *)&ax); + bytewise_xor(mic, &ax, iv, 8); + d_printf(4, NULL, "D: CTR[MIC]\n"); + d_dump(4, NULL, &ax, 8); + d_printf(4, NULL, "D: CCM-MIC tag\n"); + d_dump(4, NULL, mic, 8); + result = 8; +error_cbc_crypt: + kfree(dst_buf); +error_dst_buf: + d_fnend(3, NULL, "(tfm_cbc %p, tfm_aes %p, mic %p, " + "n %p, a %p, b %p, blen %zu)\n", + tfm_cbc, tfm_aes, mic, n, a, b, blen); + return result; +} + +/* + * WUSB Pseudo Random Function (WUSB1.0[6.5]) + * + * @b: buffer to the source data; cannot be a global or const local + * (will confuse the scatterlists) + */ +ssize_t wusb_prf(void *out, size_t out_size, + const u8 key[16], const struct aes_ccm_nonce *_n, + const struct aes_ccm_label *a, + const void *b, size_t blen, size_t len) +{ + ssize_t result, bytes = 0, bitr; + struct aes_ccm_nonce n = *_n; + struct crypto_blkcipher *tfm_cbc; + struct crypto_cipher *tfm_aes; + u64 sfn = 0; + __le64 sfn_le; + + d_fnstart(3, NULL, "(out %p, out_size %zu, key %p, _n %p, " + "a %p, b %p, blen %zu, len %zu)\n", out, out_size, + key, _n, a, b, blen, len); + + tfm_cbc = crypto_alloc_blkcipher("cbc(aes)", 0, CRYPTO_ALG_ASYNC); + if (IS_ERR(tfm_cbc)) { + result = PTR_ERR(tfm_cbc); + printk(KERN_ERR "E: can't load CBC(AES): %d\n", (int)result); + goto error_alloc_cbc; + } + result = crypto_blkcipher_setkey(tfm_cbc, key, 16); + if (result < 0) { + printk(KERN_ERR "E: can't set CBC key: %d\n", (int)result); + goto error_setkey_cbc; + } + + tfm_aes = crypto_alloc_cipher("aes", 0, CRYPTO_ALG_ASYNC); + if (IS_ERR(tfm_aes)) { + result = PTR_ERR(tfm_aes); + printk(KERN_ERR "E: can't load AES: %d\n", (int)result); + goto error_alloc_aes; + } + result = crypto_cipher_setkey(tfm_aes, key, 16); + if (result < 0) { + printk(KERN_ERR "E: can't set AES key: %d\n", (int)result); + goto error_setkey_aes; + } + + for (bitr = 0; bitr < (len + 63) / 64; bitr++) { + sfn_le = cpu_to_le64(sfn++); + memcpy(&n.sfn, &sfn_le, sizeof(n.sfn)); /* n.sfn++... */ + result = wusb_ccm_mac(tfm_cbc, tfm_aes, out + bytes, + &n, a, b, blen); + if (result < 0) + goto error_ccm_mac; + bytes += result; + } + result = bytes; +error_ccm_mac: +error_setkey_aes: + crypto_free_cipher(tfm_aes); +error_alloc_aes: +error_setkey_cbc: + crypto_free_blkcipher(tfm_cbc); +error_alloc_cbc: + d_fnend(3, NULL, "(out %p, out_size %zu, key %p, _n %p, " + "a %p, b %p, blen %zu, len %zu) = %d\n", out, out_size, + key, _n, a, b, blen, len, (int)bytes); + return result; +} + +/* WUSB1.0[A.2] test vectors */ +static const u8 stv_hsmic_key[16] = { + 0x4b, 0x79, 0xa3, 0xcf, 0xe5, 0x53, 0x23, 0x9d, + 0xd7, 0xc1, 0x6d, 0x1c, 0x2d, 0xab, 0x6d, 0x3f +}; + +static const struct aes_ccm_nonce stv_hsmic_n = { + .sfn = { 0 }, + .tkid = { 0x76, 0x98, 0x01, }, + .dest_addr = { .data = { 0xbe, 0x00 } }, + .src_addr = { .data = { 0x76, 0x98 } }, +}; + +/* + * Out-of-band MIC Generation verification code + * + */ +static int wusb_oob_mic_verify(void) +{ + int result; + u8 mic[8]; + /* WUSB1.0[A.2] test vectors + * + * Need to keep it in the local stack as GCC 4.1.3something + * messes up and generates noise. + */ + struct usb_handshake stv_hsmic_hs = { + .bMessageNumber = 2, + .bStatus = 00, + .tTKID = { 0x76, 0x98, 0x01 }, + .bReserved = 00, + .CDID = { 0x30, 0x31, 0x32, 0x33, 0x34, 0x35, + 0x36, 0x37, 0x38, 0x39, 0x3a, 0x3b, + 0x3c, 0x3d, 0x3e, 0x3f }, + .nonce = { 0x20, 0x21, 0x22, 0x23, 0x24, 0x25, + 0x26, 0x27, 0x28, 0x29, 0x2a, 0x2b, + 0x2c, 0x2d, 0x2e, 0x2f }, + .MIC = { 0x75, 0x6a, 0x97, 0x51, 0x0c, 0x8c, + 0x14, 0x7b } , + }; + size_t hs_size; + + result = wusb_oob_mic(mic, stv_hsmic_key, &stv_hsmic_n, &stv_hsmic_hs); + if (result < 0) + printk(KERN_ERR "E: WUSB OOB MIC test: failed: %d\n", result); + else if (memcmp(stv_hsmic_hs.MIC, mic, sizeof(mic))) { + printk(KERN_ERR "E: OOB MIC test: " + "mismatch between MIC result and WUSB1.0[A2]\n"); + hs_size = sizeof(stv_hsmic_hs) - sizeof(stv_hsmic_hs.MIC); + printk(KERN_ERR "E: Handshake2 in: (%zu bytes)\n", hs_size); + dump_bytes(NULL, &stv_hsmic_hs, hs_size); + printk(KERN_ERR "E: CCM Nonce in: (%zu bytes)\n", + sizeof(stv_hsmic_n)); + dump_bytes(NULL, &stv_hsmic_n, sizeof(stv_hsmic_n)); + printk(KERN_ERR "E: MIC out:\n"); + dump_bytes(NULL, mic, sizeof(mic)); + printk(KERN_ERR "E: MIC out (from WUSB1.0[A.2]):\n"); + dump_bytes(NULL, stv_hsmic_hs.MIC, sizeof(stv_hsmic_hs.MIC)); + result = -EINVAL; + } else + result = 0; + return result; +} + +/* + * Test vectors for Key derivation + * + * These come from WUSB1.0[6.5.1], the vectors in WUSB1.0[A.1] + * (errata corrected in 2005/07). + */ +static const u8 stv_key_a1[16] __attribute__ ((__aligned__(4))) = { + 0xf0, 0xe1, 0xd2, 0xc3, 0xb4, 0xa5, 0x96, 0x87, + 0x78, 0x69, 0x5a, 0x4b, 0x3c, 0x2d, 0x1e, 0x0f +}; + +static const struct aes_ccm_nonce stv_keydvt_n_a1 = { + .sfn = { 0 }, + .tkid = { 0x76, 0x98, 0x01, }, + .dest_addr = { .data = { 0xbe, 0x00 } }, + .src_addr = { .data = { 0x76, 0x98 } }, +}; + +static const struct wusb_keydvt_out stv_keydvt_out_a1 = { + .kck = { + 0x4b, 0x79, 0xa3, 0xcf, 0xe5, 0x53, 0x23, 0x9d, + 0xd7, 0xc1, 0x6d, 0x1c, 0x2d, 0xab, 0x6d, 0x3f + }, + .ptk = { + 0xc8, 0x70, 0x62, 0x82, 0xb6, 0x7c, 0xe9, 0x06, + 0x7b, 0xc5, 0x25, 0x69, 0xf2, 0x36, 0x61, 0x2d + } +}; + +/* + * Performa a test to make sure we match the vectors defined in + * WUSB1.0[A.1](Errata2006/12) + */ +static int wusb_key_derive_verify(void) +{ + int result = 0; + struct wusb_keydvt_out keydvt_out; + /* These come from WUSB1.0[A.1] + 2006/12 errata + * NOTE: can't make this const or global -- somehow it seems + * the scatterlists for crypto get confused and we get + * bad data. There is no doc on this... */ + struct wusb_keydvt_in stv_keydvt_in_a1 = { + .hnonce = { + 0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17, + 0x18, 0x19, 0x1a, 0x1b, 0x1c, 0x1d, 0x1e, 0x1f + }, + .dnonce = { + 0x20, 0x21, 0x22, 0x23, 0x24, 0x25, 0x26, 0x27, + 0x28, 0x29, 0x2a, 0x2b, 0x2c, 0x2d, 0x2e, 0x2f + } + }; + + result = wusb_key_derive(&keydvt_out, stv_key_a1, &stv_keydvt_n_a1, + &stv_keydvt_in_a1); + if (result < 0) + printk(KERN_ERR "E: WUSB key derivation test: " + "derivation failed: %d\n", result); + if (memcmp(&stv_keydvt_out_a1, &keydvt_out, sizeof(keydvt_out))) { + printk(KERN_ERR "E: WUSB key derivation test: " + "mismatch between key derivation result " + "and WUSB1.0[A1] Errata 2006/12\n"); + printk(KERN_ERR "E: keydvt in: key (%zu bytes)\n", + sizeof(stv_key_a1)); + dump_bytes(NULL, stv_key_a1, sizeof(stv_key_a1)); + printk(KERN_ERR "E: keydvt in: nonce (%zu bytes)\n", + sizeof(stv_keydvt_n_a1)); + dump_bytes(NULL, &stv_keydvt_n_a1, sizeof(stv_keydvt_n_a1)); + printk(KERN_ERR "E: keydvt in: hnonce & dnonce (%zu bytes)\n", + sizeof(stv_keydvt_in_a1)); + dump_bytes(NULL, &stv_keydvt_in_a1, sizeof(stv_keydvt_in_a1)); + printk(KERN_ERR "E: keydvt out: KCK\n"); + dump_bytes(NULL, &keydvt_out.kck, sizeof(keydvt_out.kck)); + printk(KERN_ERR "E: keydvt out: PTK\n"); + dump_bytes(NULL, &keydvt_out.ptk, sizeof(keydvt_out.ptk)); + result = -EINVAL; + } else + result = 0; + return result; +} + +/* + * Initialize crypto system + * + * FIXME: we do nothing now, other than verifying. Later on we'll + * cache the encryption stuff, so that's why we have a separate init. + */ +int wusb_crypto_init(void) +{ + int result; + + result = wusb_key_derive_verify(); + if (result < 0) + return result; + return wusb_oob_mic_verify(); +} + +void wusb_crypto_exit(void) +{ + /* FIXME: free cached crypto transforms */ +} diff --git a/drivers/usb/wusbcore/dev-sysfs.c b/drivers/usb/wusbcore/dev-sysfs.c new file mode 100644 index 000000000000..7897a19652e5 --- /dev/null +++ b/drivers/usb/wusbcore/dev-sysfs.c @@ -0,0 +1,143 @@ +/* + * WUSB devices + * sysfs bindings + * + * Copyright (C) 2007 Intel Corporation + * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + * + * + * Get them out of the way... + */ + +#include <linux/jiffies.h> +#include <linux/ctype.h> +#include <linux/workqueue.h> +#include "wusbhc.h" + +#undef D_LOCAL +#define D_LOCAL 4 +#include <linux/uwb/debug.h> + +static ssize_t wusb_disconnect_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t size) +{ + struct usb_device *usb_dev; + struct wusbhc *wusbhc; + unsigned command; + u8 port_idx; + + if (sscanf(buf, "%u", &command) != 1) + return -EINVAL; + if (command == 0) + return size; + usb_dev = to_usb_device(dev); + wusbhc = wusbhc_get_by_usb_dev(usb_dev); + if (wusbhc == NULL) + return -ENODEV; + + mutex_lock(&wusbhc->mutex); + port_idx = wusb_port_no_to_idx(usb_dev->portnum); + __wusbhc_dev_disable(wusbhc, port_idx); + mutex_unlock(&wusbhc->mutex); + wusbhc_put(wusbhc); + return size; +} +static DEVICE_ATTR(wusb_disconnect, 0200, NULL, wusb_disconnect_store); + +static ssize_t wusb_cdid_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + ssize_t result; + struct wusb_dev *wusb_dev; + + wusb_dev = wusb_dev_get_by_usb_dev(to_usb_device(dev)); + if (wusb_dev == NULL) + return -ENODEV; + result = ckhdid_printf(buf, PAGE_SIZE, &wusb_dev->cdid); + strcat(buf, "\n"); + wusb_dev_put(wusb_dev); + return result + 1; +} +static DEVICE_ATTR(wusb_cdid, 0444, wusb_cdid_show, NULL); + +static ssize_t wusb_ck_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t size) +{ + int result; + struct usb_device *usb_dev; + struct wusbhc *wusbhc; + struct wusb_ckhdid ck; + + result = sscanf(buf, + "%02hhx %02hhx %02hhx %02hhx " + "%02hhx %02hhx %02hhx %02hhx " + "%02hhx %02hhx %02hhx %02hhx " + "%02hhx %02hhx %02hhx %02hhx\n", + &ck.data[0] , &ck.data[1], + &ck.data[2] , &ck.data[3], + &ck.data[4] , &ck.data[5], + &ck.data[6] , &ck.data[7], + &ck.data[8] , &ck.data[9], + &ck.data[10], &ck.data[11], + &ck.data[12], &ck.data[13], + &ck.data[14], &ck.data[15]); + if (result != 16) + return -EINVAL; + + usb_dev = to_usb_device(dev); + wusbhc = wusbhc_get_by_usb_dev(usb_dev); + if (wusbhc == NULL) + return -ENODEV; + result = wusb_dev_4way_handshake(wusbhc, usb_dev->wusb_dev, &ck); + memset(&ck, 0, sizeof(ck)); + wusbhc_put(wusbhc); + return result < 0 ? result : size; +} +static DEVICE_ATTR(wusb_ck, 0200, NULL, wusb_ck_store); + +static struct attribute *wusb_dev_attrs[] = { + &dev_attr_wusb_disconnect.attr, + &dev_attr_wusb_cdid.attr, + &dev_attr_wusb_ck.attr, + NULL, +}; + +static struct attribute_group wusb_dev_attr_group = { + .name = NULL, /* we want them in the same directory */ + .attrs = wusb_dev_attrs, +}; + +int wusb_dev_sysfs_add(struct wusbhc *wusbhc, struct usb_device *usb_dev, + struct wusb_dev *wusb_dev) +{ + int result = sysfs_create_group(&usb_dev->dev.kobj, + &wusb_dev_attr_group); + struct device *dev = &usb_dev->dev; + if (result < 0) + dev_err(dev, "Cannot register WUSB-dev attributes: %d\n", + result); + return result; +} + +void wusb_dev_sysfs_rm(struct wusb_dev *wusb_dev) +{ + struct usb_device *usb_dev = wusb_dev->usb_dev; + if (usb_dev) + sysfs_remove_group(&usb_dev->dev.kobj, &wusb_dev_attr_group); +} diff --git a/drivers/usb/wusbcore/devconnect.c b/drivers/usb/wusbcore/devconnect.c new file mode 100644 index 000000000000..f45d777bef34 --- /dev/null +++ b/drivers/usb/wusbcore/devconnect.c @@ -0,0 +1,1297 @@ +/* + * WUSB Wire Adapter: Control/Data Streaming Interface (WUSB[8]) + * Device Connect handling + * + * Copyright (C) 2006 Intel Corporation + * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + * + * + * FIXME: docs + * FIXME: this file needs to be broken up, it's grown too big + * + * + * WUSB1.0[7.1, 7.5.1, ] + * + * WUSB device connection is kind of messy. Some background: + * + * When a device wants to connect it scans the UWB radio channels + * looking for a WUSB Channel; a WUSB channel is defined by MMCs + * (Micro Managed Commands or something like that) [see + * Design-overview for more on this] . + * + * So, device scans the radio, finds MMCs and thus a host and checks + * when the next DNTS is. It sends a Device Notification Connect + * (DN_Connect); the host picks it up (through nep.c and notif.c, ends + * up in wusb_devconnect_ack(), which creates a wusb_dev structure in + * wusbhc->port[port_number].wusb_dev), assigns an unauth address + * to the device (this means from 0x80 to 0xfe) and sends, in the MMC + * a Connect Ack Information Element (ConnAck IE). + * + * So now the device now has a WUSB address. From now on, we use + * that to talk to it in the RPipes. + * + * ASSUMPTIONS: + * + * - We use the the as device address the port number where it is + * connected (port 0 doesn't exist). For unauth, it is 128 + that. + * + * ROADMAP: + * + * This file contains the logic for doing that--entry points: + * + * wusb_devconnect_ack() Ack a device until _acked() called. + * Called by notif.c:wusb_handle_dn_connect() + * when a DN_Connect is received. + * + * wusbhc_devconnect_auth() Called by rh.c:wusbhc_rh_port_reset() when + * doing the device connect sequence. + * + * wusb_devconnect_acked() Ack done, release resources. + * + * wusb_handle_dn_alive() Called by notif.c:wusb_handle_dn() + * for processing a DN_Alive pong from a device. + * + * wusb_handle_dn_disconnect()Called by notif.c:wusb_handle_dn() to + * process a disconenct request from a + * device. + * + * wusb_dev_reset() Called by rh.c:wusbhc_rh_port_reset() when + * resetting a device. + * + * __wusb_dev_disable() Called by rh.c:wusbhc_rh_clear_port_feat() when + * disabling a port. + * + * wusb_devconnect_create() Called when creating the host by + * lc.c:wusbhc_create(). + * + * wusb_devconnect_destroy() Cleanup called removing the host. Called + * by lc.c:wusbhc_destroy(). + * + * Each Wireless USB host maintains a list of DN_Connect requests + * (actually we maintain a list of pending Connect Acks, the + * wusbhc->ca_list). + * + * LIFE CYCLE OF port->wusb_dev + * + * Before the @wusbhc structure put()s the reference it owns for + * port->wusb_dev [and clean the wusb_dev pointer], it needs to + * lock @wusbhc->mutex. + */ + +#include <linux/jiffies.h> +#include <linux/ctype.h> +#include <linux/workqueue.h> +#include "wusbhc.h" + +#undef D_LOCAL +#define D_LOCAL 1 +#include <linux/uwb/debug.h> + +static void wusbhc_devconnect_acked_work(struct work_struct *work); + +static void wusb_dev_free(struct wusb_dev *wusb_dev) +{ + if (wusb_dev) { + kfree(wusb_dev->set_gtk_req); + usb_free_urb(wusb_dev->set_gtk_urb); + kfree(wusb_dev); + } +} + +static struct wusb_dev *wusb_dev_alloc(struct wusbhc *wusbhc) +{ + struct wusb_dev *wusb_dev; + struct urb *urb; + struct usb_ctrlrequest *req; + + wusb_dev = kzalloc(sizeof(*wusb_dev), GFP_KERNEL); + if (wusb_dev == NULL) + goto err; + + wusb_dev->wusbhc = wusbhc; + + INIT_WORK(&wusb_dev->devconnect_acked_work, wusbhc_devconnect_acked_work); + + urb = usb_alloc_urb(0, GFP_KERNEL); + if (urb == NULL) + goto err; + + req = kmalloc(sizeof(struct usb_ctrlrequest), GFP_KERNEL); + if (req == NULL) + goto err; + + req->bRequestType = USB_DIR_OUT | USB_TYPE_STANDARD | USB_RECIP_DEVICE; + req->bRequest = USB_REQ_SET_DESCRIPTOR; + req->wValue = cpu_to_le16(USB_DT_KEY << 8 | wusbhc->gtk_index); + req->wIndex = 0; + req->wLength = cpu_to_le16(wusbhc->gtk.descr.bLength); + + wusb_dev->set_gtk_urb = urb; + wusb_dev->set_gtk_req = req; + + return wusb_dev; +err: + wusb_dev_free(wusb_dev); + return NULL; +} + + +/* + * Using the Connect-Ack list, fill out the @wusbhc Connect-Ack WUSB IE + * properly so that it can be added to the MMC. + * + * We just get the @wusbhc->ca_list and fill out the first four ones or + * less (per-spec WUSB1.0[7.5, before T7-38). If the ConnectAck WUSB + * IE is not allocated, we alloc it. + * + * @wusbhc->mutex must be taken + */ +static void wusbhc_fill_cack_ie(struct wusbhc *wusbhc) +{ + unsigned cnt; + struct wusb_dev *dev_itr; + struct wuie_connect_ack *cack_ie; + + cack_ie = &wusbhc->cack_ie; + cnt = 0; + list_for_each_entry(dev_itr, &wusbhc->cack_list, cack_node) { + cack_ie->blk[cnt].CDID = dev_itr->cdid; + cack_ie->blk[cnt].bDeviceAddress = dev_itr->addr; + if (++cnt >= WUIE_ELT_MAX) + break; + } + cack_ie->hdr.bLength = sizeof(cack_ie->hdr) + + cnt * sizeof(cack_ie->blk[0]); +} + +/* + * Register a new device that wants to connect + * + * A new device wants to connect, so we add it to the Connect-Ack + * list. We give it an address in the unauthorized range (bit 8 set); + * user space will have to drive authorization further on. + * + * @dev_addr: address to use for the device (which is also the port + * number). + * + * @wusbhc->mutex must be taken + */ +static struct wusb_dev *wusbhc_cack_add(struct wusbhc *wusbhc, + struct wusb_dn_connect *dnc, + const char *pr_cdid, u8 port_idx) +{ + struct device *dev = wusbhc->dev; + struct wusb_dev *wusb_dev; + int new_connection = wusb_dn_connect_new_connection(dnc); + u8 dev_addr; + int result; + + /* Is it registered already? */ + list_for_each_entry(wusb_dev, &wusbhc->cack_list, cack_node) + if (!memcmp(&wusb_dev->cdid, &dnc->CDID, + sizeof(wusb_dev->cdid))) + return wusb_dev; + /* We don't have it, create an entry, register it */ + wusb_dev = wusb_dev_alloc(wusbhc); + if (wusb_dev == NULL) + return NULL; + wusb_dev_init(wusb_dev); + wusb_dev->cdid = dnc->CDID; + wusb_dev->port_idx = port_idx; + + /* + * Devices are always available within the cluster reservation + * and since the hardware will take the intersection of the + * per-device availability and the cluster reservation, the + * per-device availability can simply be set to always + * available. + */ + bitmap_fill(wusb_dev->availability.bm, UWB_NUM_MAS); + + /* FIXME: handle reconnects instead of assuming connects are + always new. */ + if (1 && new_connection == 0) + new_connection = 1; + if (new_connection) { + dev_addr = (port_idx + 2) | WUSB_DEV_ADDR_UNAUTH; + + dev_info(dev, "Connecting new WUSB device to address %u, " + "port %u\n", dev_addr, port_idx); + + result = wusb_set_dev_addr(wusbhc, wusb_dev, dev_addr); + if (result < 0) + return NULL; + } + wusb_dev->entry_ts = jiffies; + list_add_tail(&wusb_dev->cack_node, &wusbhc->cack_list); + wusbhc->cack_count++; + wusbhc_fill_cack_ie(wusbhc); + return wusb_dev; +} + +/* + * Remove a Connect-Ack context entry from the HCs view + * + * @wusbhc->mutex must be taken + */ +static void wusbhc_cack_rm(struct wusbhc *wusbhc, struct wusb_dev *wusb_dev) +{ + struct device *dev = wusbhc->dev; + d_fnstart(3, dev, "(wusbhc %p wusb_dev %p)\n", wusbhc, wusb_dev); + list_del_init(&wusb_dev->cack_node); + wusbhc->cack_count--; + wusbhc_fill_cack_ie(wusbhc); + d_fnend(3, dev, "(wusbhc %p wusb_dev %p) = void\n", wusbhc, wusb_dev); +} + +/* + * @wusbhc->mutex must be taken */ +static +void wusbhc_devconnect_acked(struct wusbhc *wusbhc, struct wusb_dev *wusb_dev) +{ + struct device *dev = wusbhc->dev; + d_fnstart(3, dev, "(wusbhc %p wusb_dev %p)\n", wusbhc, wusb_dev); + wusbhc_cack_rm(wusbhc, wusb_dev); + if (wusbhc->cack_count) + wusbhc_mmcie_set(wusbhc, 0, 0, &wusbhc->cack_ie.hdr); + else + wusbhc_mmcie_rm(wusbhc, &wusbhc->cack_ie.hdr); + d_fnend(3, dev, "(wusbhc %p wusb_dev %p) = void\n", wusbhc, wusb_dev); +} + +static void wusbhc_devconnect_acked_work(struct work_struct *work) +{ + struct wusb_dev *wusb_dev = container_of(work, struct wusb_dev, + devconnect_acked_work); + struct wusbhc *wusbhc = wusb_dev->wusbhc; + + mutex_lock(&wusbhc->mutex); + wusbhc_devconnect_acked(wusbhc, wusb_dev); + mutex_unlock(&wusbhc->mutex); +} + +/* + * Ack a device for connection + * + * FIXME: docs + * + * @pr_cdid: Printable CDID...hex Use @dnc->cdid for the real deal. + * + * So we get the connect ack IE (may have been allocated already), + * find an empty connect block, an empty virtual port, create an + * address with it (see below), make it an unauth addr [bit 7 set] and + * set the MMC. + * + * Addresses: because WUSB hosts have no downstream hubs, we can do a + * 1:1 mapping between 'port number' and device + * address. This simplifies many things, as during this + * initial connect phase the USB stack has no knoledge of + * the device and hasn't assigned an address yet--we know + * USB's choose_address() will use the same euristics we + * use here, so we can assume which address will be assigned. + * + * USB stack always assigns address 1 to the root hub, so + * to the port number we add 2 (thus virtual port #0 is + * addr #2). + * + * @wusbhc shall be referenced + */ +static +void wusbhc_devconnect_ack(struct wusbhc *wusbhc, struct wusb_dn_connect *dnc, + const char *pr_cdid) +{ + int result; + struct device *dev = wusbhc->dev; + struct wusb_dev *wusb_dev; + struct wusb_port *port; + unsigned idx, devnum; + + d_fnstart(3, dev, "(%p, %p, %s)\n", wusbhc, dnc, pr_cdid); + mutex_lock(&wusbhc->mutex); + + /* Check we are not handling it already */ + for (idx = 0; idx < wusbhc->ports_max; idx++) { + port = wusb_port_by_idx(wusbhc, idx); + if (port->wusb_dev + && memcmp(&dnc->CDID, &port->wusb_dev->cdid, sizeof(dnc->CDID)) == 0) + goto error_unlock; + } + /* Look up those fake ports we have for a free one */ + for (idx = 0; idx < wusbhc->ports_max; idx++) { + port = wusb_port_by_idx(wusbhc, idx); + if ((port->status & USB_PORT_STAT_POWER) + && !(port->status & USB_PORT_STAT_CONNECTION)) + break; + } + if (idx >= wusbhc->ports_max) { + dev_err(dev, "Host controller can't connect more devices " + "(%u already connected); device %s rejected\n", + wusbhc->ports_max, pr_cdid); + /* NOTE: we could send a WUIE_Disconnect here, but we haven't + * event acked, so the device will eventually timeout the + * connection, right? */ + goto error_unlock; + } + + devnum = idx + 2; + + /* Make sure we are using no crypto on that "virtual port" */ + wusbhc->set_ptk(wusbhc, idx, 0, NULL, 0); + + /* Grab a filled in Connect-Ack context, fill out the + * Connect-Ack Wireless USB IE, set the MMC */ + wusb_dev = wusbhc_cack_add(wusbhc, dnc, pr_cdid, idx); + if (wusb_dev == NULL) + goto error_unlock; + result = wusbhc_mmcie_set(wusbhc, 0, 0, &wusbhc->cack_ie.hdr); + if (result < 0) + goto error_unlock; + /* Give the device at least 2ms (WUSB1.0[7.5.1p3]), let's do + * three for a good measure */ + msleep(3); + port->wusb_dev = wusb_dev; + port->status |= USB_PORT_STAT_CONNECTION; + port->change |= USB_PORT_STAT_C_CONNECTION; + port->reset_count = 0; + /* Now the port status changed to connected; khubd will + * pick the change up and try to reset the port to bring it to + * the enabled state--so this process returns up to the stack + * and it calls back into wusbhc_rh_port_reset() who will call + * devconnect_auth(). + */ +error_unlock: + mutex_unlock(&wusbhc->mutex); + d_fnend(3, dev, "(%p, %p, %s) = void\n", wusbhc, dnc, pr_cdid); + return; + +} + +/* + * Disconnect a Wireless USB device from its fake port + * + * Marks the port as disconnected so that khubd can pick up the change + * and drops our knowledge about the device. + * + * Assumes there is a device connected + * + * @port_index: zero based port number + * + * NOTE: @wusbhc->mutex is locked + * + * WARNING: From here it is not very safe to access anything hanging off + * wusb_dev + */ +static void __wusbhc_dev_disconnect(struct wusbhc *wusbhc, + struct wusb_port *port) +{ + struct device *dev = wusbhc->dev; + struct wusb_dev *wusb_dev = port->wusb_dev; + + d_fnstart(3, dev, "(wusbhc %p, port %p)\n", wusbhc, port); + port->status &= ~(USB_PORT_STAT_CONNECTION | USB_PORT_STAT_ENABLE + | USB_PORT_STAT_SUSPEND | USB_PORT_STAT_RESET + | USB_PORT_STAT_LOW_SPEED | USB_PORT_STAT_HIGH_SPEED); + port->change |= USB_PORT_STAT_C_CONNECTION | USB_PORT_STAT_C_ENABLE; + if (wusb_dev) { + if (!list_empty(&wusb_dev->cack_node)) + list_del_init(&wusb_dev->cack_node); + /* For the one in cack_add() */ + wusb_dev_put(wusb_dev); + } + port->wusb_dev = NULL; + /* don't reset the reset_count to zero or wusbhc_rh_port_reset will get + * confused! We only reset to zero when we connect a new device. + */ + + /* After a device disconnects, change the GTK (see [WUSB] + * section 6.2.11.2). */ + wusbhc_gtk_rekey(wusbhc); + + d_fnend(3, dev, "(wusbhc %p, port %p) = void\n", wusbhc, port); + /* The Wireless USB part has forgotten about the device already; now + * khubd's timer will pick up the disconnection and remove the USB + * device from the system + */ +} + +/* + * Authenticate a device into the WUSB Cluster + * + * Called from the Root Hub code (rh.c:wusbhc_rh_port_reset()) when + * asking for a reset on a port that is not enabled (ie: first connect + * on the port). + * + * Performs the 4way handshake to allow the device to comunicate w/ the + * WUSB Cluster securely; once done, issue a request to the device for + * it to change to address 0. + * + * This mimics the reset step of Wired USB that once resetting a + * device, leaves the port in enabled state and the dev with the + * default address (0). + * + * WUSB1.0[7.1.2] + * + * @port_idx: port where the change happened--This is the index into + * the wusbhc port array, not the USB port number. + */ +int wusbhc_devconnect_auth(struct wusbhc *wusbhc, u8 port_idx) +{ + struct device *dev = wusbhc->dev; + struct wusb_port *port = wusb_port_by_idx(wusbhc, port_idx); + + d_fnstart(3, dev, "(%p, %u)\n", wusbhc, port_idx); + port->status &= ~USB_PORT_STAT_RESET; + port->status |= USB_PORT_STAT_ENABLE; + port->change |= USB_PORT_STAT_C_RESET | USB_PORT_STAT_C_ENABLE; + d_fnend(3, dev, "(%p, %u) = 0\n", wusbhc, port_idx); + return 0; +} + +/* + * Refresh the list of keep alives to emit in the MMC + * + * Some devices don't respond to keep alives unless they've been + * authenticated, so skip unauthenticated devices. + * + * We only publish the first four devices that have a coming timeout + * condition. Then when we are done processing those, we go for the + * next ones. We ignore the ones that have timed out already (they'll + * be purged). + * + * This might cause the first devices to timeout the last devices in + * the port array...FIXME: come up with a better algorithm? + * + * Note we can't do much about MMC's ops errors; we hope next refresh + * will kind of handle it. + * + * NOTE: @wusbhc->mutex is locked + */ +static void __wusbhc_keep_alive(struct wusbhc *wusbhc) +{ + struct device *dev = wusbhc->dev; + unsigned cnt; + struct wusb_dev *wusb_dev; + struct wusb_port *wusb_port; + struct wuie_keep_alive *ie = &wusbhc->keep_alive_ie; + unsigned keep_alives, old_keep_alives; + + old_keep_alives = ie->hdr.bLength - sizeof(ie->hdr); + keep_alives = 0; + for (cnt = 0; + keep_alives <= WUIE_ELT_MAX && cnt < wusbhc->ports_max; + cnt++) { + unsigned tt = msecs_to_jiffies(wusbhc->trust_timeout); + + wusb_port = wusb_port_by_idx(wusbhc, cnt); + wusb_dev = wusb_port->wusb_dev; + + if (wusb_dev == NULL) + continue; + if (wusb_dev->usb_dev == NULL || !wusb_dev->usb_dev->authenticated) + continue; + + if (time_after(jiffies, wusb_dev->entry_ts + tt)) { + dev_err(dev, "KEEPALIVE: device %u timed out\n", + wusb_dev->addr); + __wusbhc_dev_disconnect(wusbhc, wusb_port); + } else if (time_after(jiffies, wusb_dev->entry_ts + tt/2)) { + /* Approaching timeout cut out, need to refresh */ + ie->bDeviceAddress[keep_alives++] = wusb_dev->addr; + } + } + if (keep_alives & 0x1) /* pad to even number ([WUSB] section 7.5.9) */ + ie->bDeviceAddress[keep_alives++] = 0x7f; + ie->hdr.bLength = sizeof(ie->hdr) + + keep_alives*sizeof(ie->bDeviceAddress[0]); + if (keep_alives > 0) + wusbhc_mmcie_set(wusbhc, 10, 5, &ie->hdr); + else if (old_keep_alives != 0) + wusbhc_mmcie_rm(wusbhc, &ie->hdr); +} + +/* + * Do a run through all devices checking for timeouts + */ +static void wusbhc_keep_alive_run(struct work_struct *ws) +{ + struct delayed_work *dw = + container_of(ws, struct delayed_work, work); + struct wusbhc *wusbhc = + container_of(dw, struct wusbhc, keep_alive_timer); + + d_fnstart(5, wusbhc->dev, "(wusbhc %p)\n", wusbhc); + if (wusbhc->active) { + mutex_lock(&wusbhc->mutex); + __wusbhc_keep_alive(wusbhc); + mutex_unlock(&wusbhc->mutex); + queue_delayed_work(wusbd, &wusbhc->keep_alive_timer, + (wusbhc->trust_timeout * CONFIG_HZ)/1000/2); + } + d_fnend(5, wusbhc->dev, "(wusbhc %p) = void\n", wusbhc); + return; +} + +/* + * Find the wusb_dev from its device address. + * + * The device can be found directly from the address (see + * wusb_cack_add() for where the device address is set to port_idx + * +2), except when the address is zero. + */ +static struct wusb_dev *wusbhc_find_dev_by_addr(struct wusbhc *wusbhc, u8 addr) +{ + int p; + + if (addr == 0xff) /* unconnected */ + return NULL; + + if (addr > 0) { + int port = (addr & ~0x80) - 2; + if (port < 0 || port >= wusbhc->ports_max) + return NULL; + return wusb_port_by_idx(wusbhc, port)->wusb_dev; + } + + /* Look for the device with address 0. */ + for (p = 0; p < wusbhc->ports_max; p++) { + struct wusb_dev *wusb_dev = wusb_port_by_idx(wusbhc, p)->wusb_dev; + if (wusb_dev && wusb_dev->addr == addr) + return wusb_dev; + } + return NULL; +} + +/* + * Handle a DN_Alive notification (WUSB1.0[7.6.1]) + * + * This just updates the device activity timestamp and then refreshes + * the keep alive IE. + * + * @wusbhc shall be referenced and unlocked + */ +static void wusbhc_handle_dn_alive(struct wusbhc *wusbhc, struct wusb_dev *wusb_dev) +{ + struct device *dev = wusbhc->dev; + + d_printf(2, dev, "DN ALIVE: device 0x%02x pong\n", wusb_dev->addr); + + mutex_lock(&wusbhc->mutex); + wusb_dev->entry_ts = jiffies; + __wusbhc_keep_alive(wusbhc); + mutex_unlock(&wusbhc->mutex); +} + +/* + * Handle a DN_Connect notification (WUSB1.0[7.6.1]) + * + * @wusbhc + * @pkt_hdr + * @size: Size of the buffer where the notification resides; if the + * notification data suggests there should be more data than + * available, an error will be signaled and the whole buffer + * consumed. + * + * @wusbhc->mutex shall be held + */ +static void wusbhc_handle_dn_connect(struct wusbhc *wusbhc, + struct wusb_dn_hdr *dn_hdr, + size_t size) +{ + struct device *dev = wusbhc->dev; + struct wusb_dn_connect *dnc; + char pr_cdid[WUSB_CKHDID_STRSIZE]; + static const char *beacon_behaviour[] = { + "reserved", + "self-beacon", + "directed-beacon", + "no-beacon" + }; + + d_fnstart(3, dev, "(%p, %p, %zu)\n", wusbhc, dn_hdr, size); + if (size < sizeof(*dnc)) { + dev_err(dev, "DN CONNECT: short notification (%zu < %zu)\n", + size, sizeof(*dnc)); + goto out; + } + + dnc = container_of(dn_hdr, struct wusb_dn_connect, hdr); + ckhdid_printf(pr_cdid, sizeof(pr_cdid), &dnc->CDID); + dev_info(dev, "DN CONNECT: device %s @ %x (%s) wants to %s\n", + pr_cdid, + wusb_dn_connect_prev_dev_addr(dnc), + beacon_behaviour[wusb_dn_connect_beacon_behavior(dnc)], + wusb_dn_connect_new_connection(dnc) ? "connect" : "reconnect"); + /* ACK the connect */ + wusbhc_devconnect_ack(wusbhc, dnc, pr_cdid); +out: + d_fnend(3, dev, "(%p, %p, %zu) = void\n", + wusbhc, dn_hdr, size); + return; +} + +/* + * Handle a DN_Disconnect notification (WUSB1.0[7.6.1]) + * + * Device is going down -- do the disconnect. + * + * @wusbhc shall be referenced and unlocked + */ +static void wusbhc_handle_dn_disconnect(struct wusbhc *wusbhc, struct wusb_dev *wusb_dev) +{ + struct device *dev = wusbhc->dev; + + dev_info(dev, "DN DISCONNECT: device 0x%02x going down\n", wusb_dev->addr); + + mutex_lock(&wusbhc->mutex); + __wusbhc_dev_disconnect(wusbhc, wusb_port_by_idx(wusbhc, wusb_dev->port_idx)); + mutex_unlock(&wusbhc->mutex); +} + +/* + * Reset a WUSB device on a HWA + * + * @wusbhc + * @port_idx Index of the port where the device is + * + * In Wireless USB, a reset is more or less equivalent to a full + * disconnect; so we just do a full disconnect and send the device a + * Device Reset IE (WUSB1.0[7.5.11]) giving it a few millisecs (6 MMCs). + * + * @wusbhc should be refcounted and unlocked + */ +int wusbhc_dev_reset(struct wusbhc *wusbhc, u8 port_idx) +{ + int result; + struct device *dev = wusbhc->dev; + struct wusb_dev *wusb_dev; + struct wuie_reset *ie; + + d_fnstart(3, dev, "(%p, %u)\n", wusbhc, port_idx); + mutex_lock(&wusbhc->mutex); + result = 0; + wusb_dev = wusb_port_by_idx(wusbhc, port_idx)->wusb_dev; + if (wusb_dev == NULL) { + /* reset no device? ignore */ + dev_dbg(dev, "RESET: no device at port %u, ignoring\n", + port_idx); + goto error_unlock; + } + result = -ENOMEM; + ie = kzalloc(sizeof(*ie), GFP_KERNEL); + if (ie == NULL) + goto error_unlock; + ie->hdr.bLength = sizeof(ie->hdr) + sizeof(ie->CDID); + ie->hdr.bIEIdentifier = WUIE_ID_RESET_DEVICE; + ie->CDID = wusb_dev->cdid; + result = wusbhc_mmcie_set(wusbhc, 0xff, 6, &ie->hdr); + if (result < 0) { + dev_err(dev, "RESET: cant's set MMC: %d\n", result); + goto error_kfree; + } + __wusbhc_dev_disconnect(wusbhc, wusb_port_by_idx(wusbhc, port_idx)); + + /* 120ms, hopefully 6 MMCs (FIXME) */ + msleep(120); + wusbhc_mmcie_rm(wusbhc, &ie->hdr); +error_kfree: + kfree(ie); +error_unlock: + mutex_unlock(&wusbhc->mutex); + d_fnend(3, dev, "(%p, %u) = %d\n", wusbhc, port_idx, result); + return result; +} + +/* + * Handle a Device Notification coming a host + * + * The Device Notification comes from a host (HWA, DWA or WHCI) + * wrapped in a set of headers. Somebody else has peeled off those + * headers for us and we just get one Device Notifications. + * + * Invalid DNs (e.g., too short) are discarded. + * + * @wusbhc shall be referenced + * + * FIXMES: + * - implement priorities as in WUSB1.0[Table 7-55]? + */ +void wusbhc_handle_dn(struct wusbhc *wusbhc, u8 srcaddr, + struct wusb_dn_hdr *dn_hdr, size_t size) +{ + struct device *dev = wusbhc->dev; + struct wusb_dev *wusb_dev; + + d_fnstart(3, dev, "(%p, %p)\n", wusbhc, dn_hdr); + + if (size < sizeof(struct wusb_dn_hdr)) { + dev_err(dev, "DN data shorter than DN header (%d < %d)\n", + (int)size, (int)sizeof(struct wusb_dn_hdr)); + goto out; + } + + wusb_dev = wusbhc_find_dev_by_addr(wusbhc, srcaddr); + if (wusb_dev == NULL && dn_hdr->bType != WUSB_DN_CONNECT) { + dev_dbg(dev, "ignoring DN %d from unconnected device %02x\n", + dn_hdr->bType, srcaddr); + goto out; + } + + switch (dn_hdr->bType) { + case WUSB_DN_CONNECT: + wusbhc_handle_dn_connect(wusbhc, dn_hdr, size); + break; + case WUSB_DN_ALIVE: + wusbhc_handle_dn_alive(wusbhc, wusb_dev); + break; + case WUSB_DN_DISCONNECT: + wusbhc_handle_dn_disconnect(wusbhc, wusb_dev); + break; + case WUSB_DN_MASAVAILCHANGED: + case WUSB_DN_RWAKE: + case WUSB_DN_SLEEP: + /* FIXME: handle these DNs. */ + break; + case WUSB_DN_EPRDY: + /* The hardware handles these. */ + break; + default: + dev_warn(dev, "unknown DN %u (%d octets) from %u\n", + dn_hdr->bType, (int)size, srcaddr); + } +out: + d_fnend(3, dev, "(%p, %p) = void\n", wusbhc, dn_hdr); + return; +} +EXPORT_SYMBOL_GPL(wusbhc_handle_dn); + +/* + * Disconnect a WUSB device from a the cluster + * + * @wusbhc + * @port Fake port where the device is (wusbhc index, not USB port number). + * + * In Wireless USB, a disconnect is basically telling the device he is + * being disconnected and forgetting about him. + * + * We send the device a Device Disconnect IE (WUSB1.0[7.5.11]) for 100 + * ms and then keep going. + * + * We don't do much in case of error; we always pretend we disabled + * the port and disconnected the device. If physically the request + * didn't get there (many things can fail in the way there), the stack + * will reject the device's communication attempts. + * + * @wusbhc should be refcounted and locked + */ +void __wusbhc_dev_disable(struct wusbhc *wusbhc, u8 port_idx) +{ + int result; + struct device *dev = wusbhc->dev; + struct wusb_dev *wusb_dev; + struct wuie_disconnect *ie; + + d_fnstart(3, dev, "(%p, %u)\n", wusbhc, port_idx); + result = 0; + wusb_dev = wusb_port_by_idx(wusbhc, port_idx)->wusb_dev; + if (wusb_dev == NULL) { + /* reset no device? ignore */ + dev_dbg(dev, "DISCONNECT: no device at port %u, ignoring\n", + port_idx); + goto error; + } + __wusbhc_dev_disconnect(wusbhc, wusb_port_by_idx(wusbhc, port_idx)); + + result = -ENOMEM; + ie = kzalloc(sizeof(*ie), GFP_KERNEL); + if (ie == NULL) + goto error; + ie->hdr.bLength = sizeof(*ie); + ie->hdr.bIEIdentifier = WUIE_ID_DEVICE_DISCONNECT; + ie->bDeviceAddress = wusb_dev->addr; + result = wusbhc_mmcie_set(wusbhc, 0, 0, &ie->hdr); + if (result < 0) { + dev_err(dev, "DISCONNECT: can't set MMC: %d\n", result); + goto error_kfree; + } + + /* 120ms, hopefully 6 MMCs */ + msleep(100); + wusbhc_mmcie_rm(wusbhc, &ie->hdr); +error_kfree: + kfree(ie); +error: + d_fnend(3, dev, "(%p, %u) = %d\n", wusbhc, port_idx, result); + return; +} + +static void wusb_cap_descr_printf(const unsigned level, struct device *dev, + const struct usb_wireless_cap_descriptor *wcd) +{ + d_printf(level, dev, + "WUSB Capability Descriptor\n" + " bDevCapabilityType 0x%02x\n" + " bmAttributes 0x%02x\n" + " wPhyRates 0x%04x\n" + " bmTFITXPowerInfo 0x%02x\n" + " bmFFITXPowerInfo 0x%02x\n" + " bmBandGroup 0x%04x\n" + " bReserved 0x%02x\n", + wcd->bDevCapabilityType, + wcd->bmAttributes, + le16_to_cpu(wcd->wPHYRates), + wcd->bmTFITXPowerInfo, + wcd->bmFFITXPowerInfo, + wcd->bmBandGroup, + wcd->bReserved); +} + +/* + * Walk over the BOS descriptor, verify and grok it + * + * @usb_dev: referenced + * @wusb_dev: referenced and unlocked + * + * The BOS descriptor is defined at WUSB1.0[7.4.1], and it defines a + * "flexible" way to wrap all kinds of descriptors inside an standard + * descriptor (wonder why they didn't use normal descriptors, + * btw). Not like they lack code. + * + * At the end we go to look for the WUSB Device Capabilities + * (WUSB1.0[7.4.1.1]) that is wrapped in a device capability descriptor + * that is part of the BOS descriptor set. That tells us what does the + * device support (dual role, beacon type, UWB PHY rates). + */ +static int wusb_dev_bos_grok(struct usb_device *usb_dev, + struct wusb_dev *wusb_dev, + struct usb_bos_descriptor *bos, size_t desc_size) +{ + ssize_t result; + struct device *dev = &usb_dev->dev; + void *itr, *top; + + /* Walk over BOS capabilities, verify them */ + itr = (void *)bos + sizeof(*bos); + top = itr + desc_size - sizeof(*bos); + while (itr < top) { + struct usb_dev_cap_header *cap_hdr = itr; + size_t cap_size; + u8 cap_type; + if (top - itr < sizeof(*cap_hdr)) { + dev_err(dev, "Device BUG? premature end of BOS header " + "data [offset 0x%02x]: only %zu bytes left\n", + (int)(itr - (void *)bos), top - itr); + result = -ENOSPC; + goto error_bad_cap; + } + cap_size = cap_hdr->bLength; + cap_type = cap_hdr->bDevCapabilityType; + d_printf(4, dev, "BOS Capability: 0x%02x (%zu bytes)\n", + cap_type, cap_size); + if (cap_size == 0) + break; + if (cap_size > top - itr) { + dev_err(dev, "Device BUG? premature end of BOS data " + "[offset 0x%02x cap %02x %zu bytes]: " + "only %zu bytes left\n", + (int)(itr - (void *)bos), + cap_type, cap_size, top - itr); + result = -EBADF; + goto error_bad_cap; + } + d_dump(3, dev, itr, cap_size); + switch (cap_type) { + case USB_CAP_TYPE_WIRELESS_USB: + if (cap_size != sizeof(*wusb_dev->wusb_cap_descr)) + dev_err(dev, "Device BUG? WUSB Capability " + "descriptor is %zu bytes vs %zu " + "needed\n", cap_size, + sizeof(*wusb_dev->wusb_cap_descr)); + else { + wusb_dev->wusb_cap_descr = itr; + wusb_cap_descr_printf(3, dev, itr); + } + break; + default: + dev_err(dev, "BUG? Unknown BOS capability 0x%02x " + "(%zu bytes) at offset 0x%02x\n", cap_type, + cap_size, (int)(itr - (void *)bos)); + } + itr += cap_size; + } + result = 0; +error_bad_cap: + return result; +} + +/* + * Add information from the BOS descriptors to the device + * + * @usb_dev: referenced + * @wusb_dev: referenced and unlocked + * + * So what we do is we alloc a space for the BOS descriptor of 64 + * bytes; read the first four bytes which include the wTotalLength + * field (WUSB1.0[T7-26]) and if it fits in those 64 bytes, read the + * whole thing. If not we realloc to that size. + * + * Then we call the groking function, that will fill up + * wusb_dev->wusb_cap_descr, which is what we'll need later on. + */ +static int wusb_dev_bos_add(struct usb_device *usb_dev, + struct wusb_dev *wusb_dev) +{ + ssize_t result; + struct device *dev = &usb_dev->dev; + struct usb_bos_descriptor *bos; + size_t alloc_size = 32, desc_size = 4; + + bos = kmalloc(alloc_size, GFP_KERNEL); + if (bos == NULL) + return -ENOMEM; + result = usb_get_descriptor(usb_dev, USB_DT_BOS, 0, bos, desc_size); + if (result < 4) { + dev_err(dev, "Can't get BOS descriptor or too short: %zd\n", + result); + goto error_get_descriptor; + } + desc_size = le16_to_cpu(bos->wTotalLength); + if (desc_size >= alloc_size) { + kfree(bos); + alloc_size = desc_size; + bos = kmalloc(alloc_size, GFP_KERNEL); + if (bos == NULL) + return -ENOMEM; + } + result = usb_get_descriptor(usb_dev, USB_DT_BOS, 0, bos, desc_size); + if (result < 0 || result != desc_size) { + dev_err(dev, "Can't get BOS descriptor or too short (need " + "%zu bytes): %zd\n", desc_size, result); + goto error_get_descriptor; + } + if (result < sizeof(*bos) + || le16_to_cpu(bos->wTotalLength) != desc_size) { + dev_err(dev, "Can't get BOS descriptor or too short (need " + "%zu bytes): %zd\n", desc_size, result); + goto error_get_descriptor; + } + d_printf(2, dev, "Got BOS descriptor %zd bytes, %u capabilities\n", + result, bos->bNumDeviceCaps); + d_dump(2, dev, bos, result); + result = wusb_dev_bos_grok(usb_dev, wusb_dev, bos, result); + if (result < 0) + goto error_bad_bos; + wusb_dev->bos = bos; + return 0; + +error_bad_bos: +error_get_descriptor: + kfree(bos); + wusb_dev->wusb_cap_descr = NULL; + return result; +} + +static void wusb_dev_bos_rm(struct wusb_dev *wusb_dev) +{ + kfree(wusb_dev->bos); + wusb_dev->wusb_cap_descr = NULL; +}; + +static struct usb_wireless_cap_descriptor wusb_cap_descr_default = { + .bLength = sizeof(wusb_cap_descr_default), + .bDescriptorType = USB_DT_DEVICE_CAPABILITY, + .bDevCapabilityType = USB_CAP_TYPE_WIRELESS_USB, + + .bmAttributes = USB_WIRELESS_BEACON_NONE, + .wPHYRates = cpu_to_le16(USB_WIRELESS_PHY_53), + .bmTFITXPowerInfo = 0, + .bmFFITXPowerInfo = 0, + .bmBandGroup = cpu_to_le16(0x0001), /* WUSB1.0[7.4.1] bottom */ + .bReserved = 0 +}; + +/* + * USB stack's device addition Notifier Callback + * + * Called from drivers/usb/core/hub.c when a new device is added; we + * use this hook to perform certain WUSB specific setup work on the + * new device. As well, it is the first time we can connect the + * wusb_dev and the usb_dev. So we note it down in wusb_dev and take a + * reference that we'll drop. + * + * First we need to determine if the device is a WUSB device (else we + * ignore it). For that we use the speed setting (USB_SPEED_VARIABLE) + * [FIXME: maybe we'd need something more definitive]. If so, we track + * it's usb_busd and from there, the WUSB HC. + * + * Because all WUSB HCs are contained in a 'struct wusbhc', voila, we + * get the wusbhc for the device. + * + * We have a reference on @usb_dev (as we are called at the end of its + * enumeration). + * + * NOTE: @usb_dev locked + */ +static void wusb_dev_add_ncb(struct usb_device *usb_dev) +{ + int result = 0; + struct wusb_dev *wusb_dev; + struct wusbhc *wusbhc; + struct device *dev = &usb_dev->dev; + u8 port_idx; + + if (usb_dev->wusb == 0 || usb_dev->devnum == 1) + return; /* skip non wusb and wusb RHs */ + + d_fnstart(3, dev, "(usb_dev %p)\n", usb_dev); + + wusbhc = wusbhc_get_by_usb_dev(usb_dev); + if (wusbhc == NULL) + goto error_nodev; + mutex_lock(&wusbhc->mutex); + wusb_dev = __wusb_dev_get_by_usb_dev(wusbhc, usb_dev); + port_idx = wusb_port_no_to_idx(usb_dev->portnum); + mutex_unlock(&wusbhc->mutex); + if (wusb_dev == NULL) + goto error_nodev; + wusb_dev->usb_dev = usb_get_dev(usb_dev); + usb_dev->wusb_dev = wusb_dev_get(wusb_dev); + result = wusb_dev_sec_add(wusbhc, usb_dev, wusb_dev); + if (result < 0) { + dev_err(dev, "Cannot enable security: %d\n", result); + goto error_sec_add; + } + /* Now query the device for it's BOS and attach it to wusb_dev */ + result = wusb_dev_bos_add(usb_dev, wusb_dev); + if (result < 0) { + dev_err(dev, "Cannot get BOS descriptors: %d\n", result); + goto error_bos_add; + } + result = wusb_dev_sysfs_add(wusbhc, usb_dev, wusb_dev); + if (result < 0) + goto error_add_sysfs; +out: + wusb_dev_put(wusb_dev); + wusbhc_put(wusbhc); +error_nodev: + d_fnend(3, dev, "(usb_dev %p) = void\n", usb_dev); + return; + + wusb_dev_sysfs_rm(wusb_dev); +error_add_sysfs: + wusb_dev_bos_rm(wusb_dev); +error_bos_add: + wusb_dev_sec_rm(wusb_dev); +error_sec_add: + mutex_lock(&wusbhc->mutex); + __wusbhc_dev_disconnect(wusbhc, wusb_port_by_idx(wusbhc, port_idx)); + mutex_unlock(&wusbhc->mutex); + goto out; +} + +/* + * Undo all the steps done at connection by the notifier callback + * + * NOTE: @usb_dev locked + */ +static void wusb_dev_rm_ncb(struct usb_device *usb_dev) +{ + struct wusb_dev *wusb_dev = usb_dev->wusb_dev; + + if (usb_dev->wusb == 0 || usb_dev->devnum == 1) + return; /* skip non wusb and wusb RHs */ + + wusb_dev_sysfs_rm(wusb_dev); + wusb_dev_bos_rm(wusb_dev); + wusb_dev_sec_rm(wusb_dev); + wusb_dev->usb_dev = NULL; + usb_dev->wusb_dev = NULL; + wusb_dev_put(wusb_dev); + usb_put_dev(usb_dev); +} + +/* + * Handle notifications from the USB stack (notifier call back) + * + * This is called when the USB stack does a + * usb_{bus,device}_{add,remove}() so we can do WUSB specific + * handling. It is called with [for the case of + * USB_DEVICE_{ADD,REMOVE} with the usb_dev locked. + */ +int wusb_usb_ncb(struct notifier_block *nb, unsigned long val, + void *priv) +{ + int result = NOTIFY_OK; + + switch (val) { + case USB_DEVICE_ADD: + wusb_dev_add_ncb(priv); + break; + case USB_DEVICE_REMOVE: + wusb_dev_rm_ncb(priv); + break; + case USB_BUS_ADD: + /* ignore (for now) */ + case USB_BUS_REMOVE: + break; + default: + WARN_ON(1); + result = NOTIFY_BAD; + }; + return result; +} + +/* + * Return a referenced wusb_dev given a @wusbhc and @usb_dev + */ +struct wusb_dev *__wusb_dev_get_by_usb_dev(struct wusbhc *wusbhc, + struct usb_device *usb_dev) +{ + struct wusb_dev *wusb_dev; + u8 port_idx; + + port_idx = wusb_port_no_to_idx(usb_dev->portnum); + BUG_ON(port_idx > wusbhc->ports_max); + wusb_dev = wusb_port_by_idx(wusbhc, port_idx)->wusb_dev; + if (wusb_dev != NULL) /* ops, device is gone */ + wusb_dev_get(wusb_dev); + return wusb_dev; +} +EXPORT_SYMBOL_GPL(__wusb_dev_get_by_usb_dev); + +void wusb_dev_destroy(struct kref *_wusb_dev) +{ + struct wusb_dev *wusb_dev + = container_of(_wusb_dev, struct wusb_dev, refcnt); + list_del_init(&wusb_dev->cack_node); + wusb_dev_free(wusb_dev); + d_fnend(1, NULL, "%s (wusb_dev %p) = void\n", __func__, wusb_dev); +} +EXPORT_SYMBOL_GPL(wusb_dev_destroy); + +/* + * Create all the device connect handling infrastructure + * + * This is basically the device info array, Connect Acknowledgement + * (cack) lists, keep-alive timers (and delayed work thread). + */ +int wusbhc_devconnect_create(struct wusbhc *wusbhc) +{ + d_fnstart(3, wusbhc->dev, "(wusbhc %p)\n", wusbhc); + + wusbhc->keep_alive_ie.hdr.bIEIdentifier = WUIE_ID_KEEP_ALIVE; + wusbhc->keep_alive_ie.hdr.bLength = sizeof(wusbhc->keep_alive_ie.hdr); + INIT_DELAYED_WORK(&wusbhc->keep_alive_timer, wusbhc_keep_alive_run); + + wusbhc->cack_ie.hdr.bIEIdentifier = WUIE_ID_CONNECTACK; + wusbhc->cack_ie.hdr.bLength = sizeof(wusbhc->cack_ie.hdr); + INIT_LIST_HEAD(&wusbhc->cack_list); + + d_fnend(3, wusbhc->dev, "(wusbhc %p) = void\n", wusbhc); + return 0; +} + +/* + * Release all resources taken by the devconnect stuff + */ +void wusbhc_devconnect_destroy(struct wusbhc *wusbhc) +{ + d_fnstart(3, wusbhc->dev, "(wusbhc %p)\n", wusbhc); + d_fnend(3, wusbhc->dev, "(wusbhc %p) = void\n", wusbhc); +} + +/* + * wusbhc_devconnect_start - start accepting device connections + * @wusbhc: the WUSB HC + * + * Sets the Host Info IE to accept all new connections. + * + * FIXME: This also enables the keep alives but this is not necessary + * until there are connected and authenticated devices. + */ +int wusbhc_devconnect_start(struct wusbhc *wusbhc, + const struct wusb_ckhdid *chid) +{ + struct device *dev = wusbhc->dev; + struct wuie_host_info *hi; + int result; + + hi = kzalloc(sizeof(*hi), GFP_KERNEL); + if (hi == NULL) + return -ENOMEM; + + hi->hdr.bLength = sizeof(*hi); + hi->hdr.bIEIdentifier = WUIE_ID_HOST_INFO; + hi->attributes = cpu_to_le16((wusbhc->rsv->stream << 3) | WUIE_HI_CAP_ALL); + hi->CHID = *chid; + result = wusbhc_mmcie_set(wusbhc, 0, 0, &hi->hdr); + if (result < 0) { + dev_err(dev, "Cannot add Host Info MMCIE: %d\n", result); + goto error_mmcie_set; + } + wusbhc->wuie_host_info = hi; + + queue_delayed_work(wusbd, &wusbhc->keep_alive_timer, + (wusbhc->trust_timeout*CONFIG_HZ)/1000/2); + + return 0; + +error_mmcie_set: + kfree(hi); + return result; +} + +/* + * wusbhc_devconnect_stop - stop managing connected devices + * @wusbhc: the WUSB HC + * + * Removes the Host Info IE and stops the keep alives. + * + * FIXME: should this disconnect all devices? + */ +void wusbhc_devconnect_stop(struct wusbhc *wusbhc) +{ + cancel_delayed_work_sync(&wusbhc->keep_alive_timer); + WARN_ON(!list_empty(&wusbhc->cack_list)); + + wusbhc_mmcie_rm(wusbhc, &wusbhc->wuie_host_info->hdr); + kfree(wusbhc->wuie_host_info); + wusbhc->wuie_host_info = NULL; +} + +/* + * wusb_set_dev_addr - set the WUSB device address used by the host + * @wusbhc: the WUSB HC the device is connect to + * @wusb_dev: the WUSB device + * @addr: new device address + */ +int wusb_set_dev_addr(struct wusbhc *wusbhc, struct wusb_dev *wusb_dev, u8 addr) +{ + int result; + + wusb_dev->addr = addr; + result = wusbhc->dev_info_set(wusbhc, wusb_dev); + if (result < 0) + dev_err(wusbhc->dev, "device %d: failed to set device " + "address\n", wusb_dev->port_idx); + else + dev_info(wusbhc->dev, "device %d: %s addr %u\n", + wusb_dev->port_idx, + (addr & WUSB_DEV_ADDR_UNAUTH) ? "unauth" : "auth", + wusb_dev->addr); + + return result; +} diff --git a/drivers/usb/wusbcore/mmc.c b/drivers/usb/wusbcore/mmc.c new file mode 100644 index 000000000000..cfa77a01cebd --- /dev/null +++ b/drivers/usb/wusbcore/mmc.c @@ -0,0 +1,321 @@ +/* + * WUSB Wire Adapter: Control/Data Streaming Interface (WUSB[8]) + * MMC (Microscheduled Management Command) handling + * + * Copyright (C) 2005-2006 Intel Corporation + * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + * + * + * WUIEs and MMC IEs...well, they are almost the same at the end. MMC + * IEs are Wireless USB IEs that go into the MMC period...[what is + * that? look in Design-overview.txt]. + * + * + * This is a simple subsystem to keep track of which IEs are being + * sent by the host in the MMC period. + * + * For each WUIE we ask to send, we keep it in an array, so we can + * request its removal later, or replace the content. They are tracked + * by pointer, so be sure to use the same pointer if you want to + * remove it or update the contents. + * + * FIXME: + * - add timers that autoremove intervalled IEs? + */ +#include <linux/usb/wusb.h> +#include "wusbhc.h" + +/* Initialize the MMCIEs handling mechanism */ +int wusbhc_mmcie_create(struct wusbhc *wusbhc) +{ + u8 mmcies = wusbhc->mmcies_max; + wusbhc->mmcie = kcalloc(mmcies, sizeof(wusbhc->mmcie[0]), GFP_KERNEL); + if (wusbhc->mmcie == NULL) + return -ENOMEM; + mutex_init(&wusbhc->mmcie_mutex); + return 0; +} + +/* Release resources used by the MMCIEs handling mechanism */ +void wusbhc_mmcie_destroy(struct wusbhc *wusbhc) +{ + kfree(wusbhc->mmcie); +} + +/* + * Add or replace an MMC Wireless USB IE. + * + * @interval: See WUSB1.0[8.5.3.1] + * @repeat_cnt: See WUSB1.0[8.5.3.1] + * @handle: See WUSB1.0[8.5.3.1] + * @wuie: Pointer to the header of the WUSB IE data to add. + * MUST BE allocated in a kmalloc buffer (no stack or + * vmalloc). + * THE CALLER ALWAYS OWNS THE POINTER (we don't free it + * on remove, we just forget about it). + * @returns: 0 if ok, < 0 errno code on error. + * + * Goes over the *whole* @wusbhc->mmcie array looking for (a) the + * first free spot and (b) if @wuie is already in the array (aka: + * transmitted in the MMCs) the spot were it is. + * + * If present, we "overwrite it" (update). + * + * + * NOTE: Need special ordering rules -- see below WUSB1.0 Table 7-38. + * The host uses the handle as the 'sort' index. We + * allocate the last one always for the WUIE_ID_HOST_INFO, and + * the rest, first come first serve in inverse order. + * + * Host software must make sure that it adds the other IEs in + * the right order... the host hardware is responsible for + * placing the WCTA IEs in the right place with the other IEs + * set by host software. + * + * NOTE: we can access wusbhc->wa_descr without locking because it is + * read only. + */ +int wusbhc_mmcie_set(struct wusbhc *wusbhc, u8 interval, u8 repeat_cnt, + struct wuie_hdr *wuie) +{ + int result = -ENOBUFS; + unsigned handle, itr; + + /* Search a handle, taking into account the ordering */ + mutex_lock(&wusbhc->mmcie_mutex); + switch (wuie->bIEIdentifier) { + case WUIE_ID_HOST_INFO: + /* Always last */ + handle = wusbhc->mmcies_max - 1; + break; + case WUIE_ID_ISOCH_DISCARD: + dev_err(wusbhc->dev, "Special ordering case for WUIE ID 0x%x " + "unimplemented\n", wuie->bIEIdentifier); + result = -ENOSYS; + goto error_unlock; + default: + /* search for it or find the last empty slot */ + handle = ~0; + for (itr = 0; itr < wusbhc->mmcies_max - 1; itr++) { + if (wusbhc->mmcie[itr] == wuie) { + handle = itr; + break; + } + if (wusbhc->mmcie[itr] == NULL) + handle = itr; + } + if (handle == ~0) + goto error_unlock; + } + result = (wusbhc->mmcie_add)(wusbhc, interval, repeat_cnt, handle, + wuie); + if (result >= 0) + wusbhc->mmcie[handle] = wuie; +error_unlock: + mutex_unlock(&wusbhc->mmcie_mutex); + return result; +} +EXPORT_SYMBOL_GPL(wusbhc_mmcie_set); + +/* + * Remove an MMC IE previously added with wusbhc_mmcie_set() + * + * @wuie Pointer used to add the WUIE + */ +void wusbhc_mmcie_rm(struct wusbhc *wusbhc, struct wuie_hdr *wuie) +{ + int result; + unsigned handle, itr; + + mutex_lock(&wusbhc->mmcie_mutex); + for (itr = 0; itr < wusbhc->mmcies_max; itr++) { + if (wusbhc->mmcie[itr] == wuie) { + handle = itr; + goto found; + } + } + mutex_unlock(&wusbhc->mmcie_mutex); + return; + +found: + result = (wusbhc->mmcie_rm)(wusbhc, handle); + if (result == 0) + wusbhc->mmcie[itr] = NULL; + mutex_unlock(&wusbhc->mmcie_mutex); +} +EXPORT_SYMBOL_GPL(wusbhc_mmcie_rm); + +/* + * wusbhc_start - start transmitting MMCs and accepting connections + * @wusbhc: the HC to start + * @chid: the CHID to use for this host + * + * Establishes a cluster reservation, enables device connections, and + * starts MMCs with appropriate DNTS parameters. + */ +int wusbhc_start(struct wusbhc *wusbhc, const struct wusb_ckhdid *chid) +{ + int result; + struct device *dev = wusbhc->dev; + + WARN_ON(wusbhc->wuie_host_info != NULL); + + result = wusbhc_rsv_establish(wusbhc); + if (result < 0) { + dev_err(dev, "cannot establish cluster reservation: %d\n", + result); + goto error_rsv_establish; + } + + result = wusbhc_devconnect_start(wusbhc, chid); + if (result < 0) { + dev_err(dev, "error enabling device connections: %d\n", result); + goto error_devconnect_start; + } + + result = wusbhc_sec_start(wusbhc); + if (result < 0) { + dev_err(dev, "error starting security in the HC: %d\n", result); + goto error_sec_start; + } + /* FIXME: the choice of the DNTS parameters is somewhat + * arbitrary */ + result = wusbhc->set_num_dnts(wusbhc, 0, 15); + if (result < 0) { + dev_err(dev, "Cannot set DNTS parameters: %d\n", result); + goto error_set_num_dnts; + } + result = wusbhc->start(wusbhc); + if (result < 0) { + dev_err(dev, "error starting wusbch: %d\n", result); + goto error_wusbhc_start; + } + wusbhc->active = 1; + return 0; + +error_wusbhc_start: + wusbhc_sec_stop(wusbhc); +error_set_num_dnts: +error_sec_start: + wusbhc_devconnect_stop(wusbhc); +error_devconnect_start: + wusbhc_rsv_terminate(wusbhc); +error_rsv_establish: + return result; +} + +/* + * Disconnect all from the WUSB Channel + * + * Send a Host Disconnect IE in the MMC, wait, don't send it any more + */ +static int __wusbhc_host_disconnect_ie(struct wusbhc *wusbhc) +{ + int result = -ENOMEM; + struct wuie_host_disconnect *host_disconnect_ie; + might_sleep(); + host_disconnect_ie = kmalloc(sizeof(*host_disconnect_ie), GFP_KERNEL); + if (host_disconnect_ie == NULL) + goto error_alloc; + host_disconnect_ie->hdr.bLength = sizeof(*host_disconnect_ie); + host_disconnect_ie->hdr.bIEIdentifier = WUIE_ID_HOST_DISCONNECT; + result = wusbhc_mmcie_set(wusbhc, 0, 0, &host_disconnect_ie->hdr); + if (result < 0) + goto error_mmcie_set; + + /* WUSB1.0[8.5.3.1 & 7.5.2] */ + msleep(100); + wusbhc_mmcie_rm(wusbhc, &host_disconnect_ie->hdr); +error_mmcie_set: + kfree(host_disconnect_ie); +error_alloc: + return result; +} + +/* + * wusbhc_stop - stop transmitting MMCs + * @wusbhc: the HC to stop + * + * Send a Host Disconnect IE, wait, remove all the MMCs (stop sending MMCs). + * + * If we can't allocate a Host Stop IE, screw it, we don't notify the + * devices we are disconnecting... + */ +void wusbhc_stop(struct wusbhc *wusbhc) +{ + if (wusbhc->active) { + wusbhc->active = 0; + wusbhc->stop(wusbhc); + wusbhc_sec_stop(wusbhc); + __wusbhc_host_disconnect_ie(wusbhc); + wusbhc_devconnect_stop(wusbhc); + wusbhc_rsv_terminate(wusbhc); + } +} +EXPORT_SYMBOL_GPL(wusbhc_stop); + +/* + * Change the CHID in a WUSB Channel + * + * If it is just a new CHID, send a Host Disconnect IE and then change + * the CHID IE. + */ +static int __wusbhc_chid_change(struct wusbhc *wusbhc, + const struct wusb_ckhdid *chid) +{ + int result = -ENOSYS; + struct device *dev = wusbhc->dev; + dev_err(dev, "%s() not implemented yet\n", __func__); + return result; + + BUG_ON(wusbhc->wuie_host_info == NULL); + __wusbhc_host_disconnect_ie(wusbhc); + wusbhc->wuie_host_info->CHID = *chid; + result = wusbhc_mmcie_set(wusbhc, 0, 0, &wusbhc->wuie_host_info->hdr); + if (result < 0) + dev_err(dev, "Can't update Host Info WUSB IE: %d\n", result); + return result; +} + +/* + * Set/reset/update a new CHID + * + * Depending on the previous state of the MMCs, start, stop or change + * the sent MMC. This effectively switches the host controller on and + * off (radio wise). + */ +int wusbhc_chid_set(struct wusbhc *wusbhc, const struct wusb_ckhdid *chid) +{ + int result = 0; + + if (memcmp(chid, &wusb_ckhdid_zero, sizeof(chid)) == 0) + chid = NULL; + + mutex_lock(&wusbhc->mutex); + if (wusbhc->active) { + if (chid) + result = __wusbhc_chid_change(wusbhc, chid); + else + wusbhc_stop(wusbhc); + } else { + if (chid) + wusbhc_start(wusbhc, chid); + } + mutex_unlock(&wusbhc->mutex); + return result; +} +EXPORT_SYMBOL_GPL(wusbhc_chid_set); diff --git a/drivers/usb/wusbcore/pal.c b/drivers/usb/wusbcore/pal.c new file mode 100644 index 000000000000..7cc51e9905cf --- /dev/null +++ b/drivers/usb/wusbcore/pal.c @@ -0,0 +1,42 @@ +/* + * Wireless USB Host Controller + * UWB Protocol Adaptation Layer (PAL) glue. + * + * Copyright (C) 2008 Cambridge Silicon Radio Ltd. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include "wusbhc.h" + +/** + * wusbhc_pal_register - register the WUSB HC as a UWB PAL + * @wusbhc: the WUSB HC + */ +int wusbhc_pal_register(struct wusbhc *wusbhc) +{ + uwb_pal_init(&wusbhc->pal); + + wusbhc->pal.name = "wusbhc"; + wusbhc->pal.device = wusbhc->usb_hcd.self.controller; + + return uwb_pal_register(wusbhc->uwb_rc, &wusbhc->pal); +} + +/** + * wusbhc_pal_register - unregister the WUSB HC as a UWB PAL + * @wusbhc: the WUSB HC + */ +void wusbhc_pal_unregister(struct wusbhc *wusbhc) +{ + uwb_pal_unregister(wusbhc->uwb_rc, &wusbhc->pal); +} diff --git a/drivers/usb/wusbcore/reservation.c b/drivers/usb/wusbcore/reservation.c new file mode 100644 index 000000000000..fc63e77ded2d --- /dev/null +++ b/drivers/usb/wusbcore/reservation.c @@ -0,0 +1,115 @@ +/* + * WUSB cluster reservation management + * + * Copyright (C) 2007 Cambridge Silicon Radio Ltd. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include <linux/kernel.h> +#include <linux/uwb.h> + +#include "wusbhc.h" + +/* + * WUSB cluster reservations are multicast reservations with the + * broadcast cluster ID (BCID) as the target DevAddr. + * + * FIXME: consider adjusting the reservation depending on what devices + * are attached. + */ + +static int wusbhc_bwa_set(struct wusbhc *wusbhc, u8 stream, + const struct uwb_mas_bm *mas) +{ + if (mas == NULL) + mas = &uwb_mas_bm_zero; + return wusbhc->bwa_set(wusbhc, stream, mas); +} + +/** + * wusbhc_rsv_complete_cb - WUSB HC reservation complete callback + * @rsv: the reservation + * + * Either set or clear the HC's view of the reservation. + * + * FIXME: when a reservation is denied the HC should be stopped. + */ +static void wusbhc_rsv_complete_cb(struct uwb_rsv *rsv) +{ + struct wusbhc *wusbhc = rsv->pal_priv; + struct device *dev = wusbhc->dev; + char buf[72]; + + switch (rsv->state) { + case UWB_RSV_STATE_O_ESTABLISHED: + bitmap_scnprintf(buf, sizeof(buf), rsv->mas.bm, UWB_NUM_MAS); + dev_dbg(dev, "established reservation: %s\n", buf); + wusbhc_bwa_set(wusbhc, rsv->stream, &rsv->mas); + break; + case UWB_RSV_STATE_NONE: + dev_dbg(dev, "removed reservation\n"); + wusbhc_bwa_set(wusbhc, 0, NULL); + wusbhc->rsv = NULL; + break; + default: + dev_dbg(dev, "unexpected reservation state: %d\n", rsv->state); + break; + } +} + + +/** + * wusbhc_rsv_establish - establish a reservation for the cluster + * @wusbhc: the WUSB HC requesting a bandwith reservation + */ +int wusbhc_rsv_establish(struct wusbhc *wusbhc) +{ + struct uwb_rc *rc = wusbhc->uwb_rc; + struct uwb_rsv *rsv; + struct uwb_dev_addr bcid; + int ret; + + rsv = uwb_rsv_create(rc, wusbhc_rsv_complete_cb, wusbhc); + if (rsv == NULL) + return -ENOMEM; + + bcid.data[0] = wusbhc->cluster_id; + bcid.data[1] = 0; + + rsv->owner = &rc->uwb_dev; + rsv->target.type = UWB_RSV_TARGET_DEVADDR; + rsv->target.devaddr = bcid; + rsv->type = UWB_DRP_TYPE_PRIVATE; + rsv->max_mas = 256; + rsv->min_mas = 16; /* one MAS per zone? */ + rsv->sparsity = 16; /* at least one MAS in each zone? */ + rsv->is_multicast = true; + + ret = uwb_rsv_establish(rsv); + if (ret == 0) + wusbhc->rsv = rsv; + else + uwb_rsv_destroy(rsv); + return ret; +} + + +/** + * wusbhc_rsv_terminate - terminate any cluster reservation + * @wusbhc: the WUSB host whose reservation is to be terminated + */ +void wusbhc_rsv_terminate(struct wusbhc *wusbhc) +{ + if (wusbhc->rsv) + uwb_rsv_terminate(wusbhc->rsv); +} diff --git a/drivers/usb/wusbcore/rh.c b/drivers/usb/wusbcore/rh.c new file mode 100644 index 000000000000..267a64325106 --- /dev/null +++ b/drivers/usb/wusbcore/rh.c @@ -0,0 +1,477 @@ +/* + * Wireless USB Host Controller + * Root Hub operations + * + * + * Copyright (C) 2005-2006 Intel Corporation + * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + * + * + * We fake a root hub that has fake ports (as many as simultaneous + * devices the Wireless USB Host Controller can deal with). For each + * port we keep an state in @wusbhc->port[index] identical to the one + * specified in the USB2.0[ch11] spec and some extra device + * information that complements the one in 'struct usb_device' (as + * this lacs a hcpriv pointer). + * + * Note this is common to WHCI and HWA host controllers. + * + * Through here we enable most of the state changes that the USB stack + * will use to connect or disconnect devices. We need to do some + * forced adaptation of Wireless USB device states vs. wired: + * + * USB: WUSB: + * + * Port Powered-off port slot n/a + * Powered-on port slot available + * Disconnected port slot available + * Connected port slot assigned device + * device sent DN_Connect + * device was authenticated + * Enabled device is authenticated, transitioned + * from unauth -> auth -> default address + * -> enabled + * Reset disconnect + * Disable disconnect + * + * This maps the standard USB port states with the WUSB device states + * so we can fake ports without having to modify the USB stack. + * + * FIXME: this process will change in the future + * + * + * ENTRY POINTS + * + * Our entry points into here are, as in hcd.c, the USB stack root hub + * ops defined in the usb_hcd struct: + * + * wusbhc_rh_status_data() Provide hub and port status data bitmap + * + * wusbhc_rh_control() Execution of all the major requests + * you can do to a hub (Set|Clear + * features, get descriptors, status, etc). + * + * wusbhc_rh_[suspend|resume]() That + * + * wusbhc_rh_start_port_reset() ??? unimplemented + */ +#include "wusbhc.h" + +#define D_LOCAL 0 +#include <linux/uwb/debug.h> + +/* + * Reset a fake port + * + * This can be called to reset a port from any other state or to reset + * it when connecting. In Wireless USB they are different; when doing + * a new connect that involves going over the authentication. When + * just reseting, its a different story. + * + * The Linux USB stack resets a port twice before it considers it + * enabled, so we have to detect and ignore that. + * + * @wusbhc is assumed referenced and @wusbhc->mutex unlocked. + * + * Supposedly we are the only thread accesing @wusbhc->port; in any + * case, maybe we should move the mutex locking from + * wusbhc_devconnect_auth() to here. + * + * @port_idx refers to the wusbhc's port index, not the USB port number + */ +static int wusbhc_rh_port_reset(struct wusbhc *wusbhc, u8 port_idx) +{ + int result = 0; + struct wusb_port *port = wusb_port_by_idx(wusbhc, port_idx); + + d_fnstart(3, wusbhc->dev, "(wusbhc %p port_idx %u)\n", + wusbhc, port_idx); + if (port->reset_count == 0) { + wusbhc_devconnect_auth(wusbhc, port_idx); + port->reset_count++; + } else if (port->reset_count == 1) + /* see header */ + d_printf(2, wusbhc->dev, "Ignoring second reset on port_idx " + "%u\n", port_idx); + else + result = wusbhc_dev_reset(wusbhc, port_idx); + d_fnend(3, wusbhc->dev, "(wusbhc %p port_idx %u) = %d\n", + wusbhc, port_idx, result); + return result; +} + +/* + * Return the hub change status bitmap + * + * The bits in the change status bitmap are cleared when a + * ClearPortFeature request is issued (USB2.0[11.12.3,11.12.4]. + * + * @wusbhc is assumed referenced and @wusbhc->mutex unlocked. + * + * WARNING!! This gets called from atomic context; we cannot get the + * mutex--the only race condition we can find is some bit + * changing just after we copy it, which shouldn't be too + * big of a problem [and we can't make it an spinlock + * because other parts need to take it and sleep] . + * + * @usb_hcd is refcounted, so it won't dissapear under us + * and before killing a host, the polling of the root hub + * would be stopped anyway. + */ +int wusbhc_rh_status_data(struct usb_hcd *usb_hcd, char *_buf) +{ + struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd); + size_t cnt, size; + unsigned long *buf = (unsigned long *) _buf; + + d_fnstart(1, wusbhc->dev, "(wusbhc %p)\n", wusbhc); + /* WE DON'T LOCK, see comment */ + size = wusbhc->ports_max + 1 /* hub bit */; + size = (size + 8 - 1) / 8; /* round to bytes */ + for (cnt = 0; cnt < wusbhc->ports_max; cnt++) + if (wusb_port_by_idx(wusbhc, cnt)->change) + set_bit(cnt + 1, buf); + else + clear_bit(cnt + 1, buf); + d_fnend(1, wusbhc->dev, "(wusbhc %p) %u, buffer:\n", wusbhc, (int)size); + d_dump(1, wusbhc->dev, _buf, size); + return size; +} +EXPORT_SYMBOL_GPL(wusbhc_rh_status_data); + +/* + * Return the hub's desciptor + * + * NOTE: almost cut and paste from ehci-hub.c + * + * @wusbhc is assumed referenced and @wusbhc->mutex unlocked + */ +static int wusbhc_rh_get_hub_descr(struct wusbhc *wusbhc, u16 wValue, + u16 wIndex, + struct usb_hub_descriptor *descr, + u16 wLength) +{ + u16 temp = 1 + (wusbhc->ports_max / 8); + u8 length = 7 + 2 * temp; + + if (wLength < length) + return -ENOSPC; + descr->bDescLength = 7 + 2 * temp; + descr->bDescriptorType = 0x29; /* HUB type */ + descr->bNbrPorts = wusbhc->ports_max; + descr->wHubCharacteristics = cpu_to_le16( + 0x00 /* All ports power at once */ + | 0x00 /* not part of compound device */ + | 0x10 /* No overcurrent protection */ + | 0x00 /* 8 FS think time FIXME ?? */ + | 0x00); /* No port indicators */ + descr->bPwrOn2PwrGood = 0; + descr->bHubContrCurrent = 0; + /* two bitmaps: ports removable, and usb 1.0 legacy PortPwrCtrlMask */ + memset(&descr->bitmap[0], 0, temp); + memset(&descr->bitmap[temp], 0xff, temp); + return 0; +} + +/* + * Clear a hub feature + * + * @wusbhc is assumed referenced and @wusbhc->mutex unlocked. + * + * Nothing to do, so no locking needed ;) + */ +static int wusbhc_rh_clear_hub_feat(struct wusbhc *wusbhc, u16 feature) +{ + int result; + struct device *dev = wusbhc->dev; + + d_fnstart(4, dev, "(%p, feature 0x%04u)\n", wusbhc, feature); + switch (feature) { + case C_HUB_LOCAL_POWER: + /* FIXME: maybe plug bit 0 to the power input status, + * if any? + * see wusbhc_rh_get_hub_status() */ + case C_HUB_OVER_CURRENT: + result = 0; + break; + default: + result = -EPIPE; + } + d_fnend(4, dev, "(%p, feature 0x%04u), %d\n", wusbhc, feature, result); + return result; +} + +/* + * Return hub status (it is always zero...) + * + * @wusbhc is assumed referenced and @wusbhc->mutex unlocked. + * + * Nothing to do, so no locking needed ;) + */ +static int wusbhc_rh_get_hub_status(struct wusbhc *wusbhc, u32 *buf, + u16 wLength) +{ + /* FIXME: maybe plug bit 0 to the power input status (if any)? */ + *buf = 0; + return 0; +} + +/* + * Set a port feature + * + * @wusbhc is assumed referenced and @wusbhc->mutex unlocked. + */ +static int wusbhc_rh_set_port_feat(struct wusbhc *wusbhc, u16 feature, + u8 selector, u8 port_idx) +{ + int result = -EINVAL; + struct device *dev = wusbhc->dev; + + d_fnstart(4, dev, "(feat 0x%04u, selector 0x%u, port_idx %d)\n", + feature, selector, port_idx); + + if (port_idx > wusbhc->ports_max) + goto error; + + switch (feature) { + /* According to USB2.0[11.24.2.13]p2, these features + * are not required to be implemented. */ + case USB_PORT_FEAT_C_OVER_CURRENT: + case USB_PORT_FEAT_C_ENABLE: + case USB_PORT_FEAT_C_SUSPEND: + case USB_PORT_FEAT_C_CONNECTION: + case USB_PORT_FEAT_C_RESET: + result = 0; + break; + + case USB_PORT_FEAT_POWER: + /* No such thing, but we fake it works */ + mutex_lock(&wusbhc->mutex); + wusb_port_by_idx(wusbhc, port_idx)->status |= USB_PORT_STAT_POWER; + mutex_unlock(&wusbhc->mutex); + result = 0; + break; + case USB_PORT_FEAT_RESET: + result = wusbhc_rh_port_reset(wusbhc, port_idx); + break; + case USB_PORT_FEAT_ENABLE: + case USB_PORT_FEAT_SUSPEND: + dev_err(dev, "(port_idx %d) set feat %d/%d UNIMPLEMENTED\n", + port_idx, feature, selector); + result = -ENOSYS; + break; + default: + dev_err(dev, "(port_idx %d) set feat %d/%d UNKNOWN\n", + port_idx, feature, selector); + result = -EPIPE; + break; + } +error: + d_fnend(4, dev, "(feat 0x%04u, selector 0x%u, port_idx %d) = %d\n", + feature, selector, port_idx, result); + return result; +} + +/* + * Clear a port feature... + * + * @wusbhc is assumed referenced and @wusbhc->mutex unlocked. + */ +static int wusbhc_rh_clear_port_feat(struct wusbhc *wusbhc, u16 feature, + u8 selector, u8 port_idx) +{ + int result = -EINVAL; + struct device *dev = wusbhc->dev; + + d_fnstart(4, dev, "(wusbhc %p feat 0x%04x selector %d port_idx %d)\n", + wusbhc, feature, selector, port_idx); + + if (port_idx > wusbhc->ports_max) + goto error; + + mutex_lock(&wusbhc->mutex); + result = 0; + switch (feature) { + case USB_PORT_FEAT_POWER: /* fake port always on */ + /* According to USB2.0[11.24.2.7.1.4], no need to implement? */ + case USB_PORT_FEAT_C_OVER_CURRENT: + break; + case USB_PORT_FEAT_C_RESET: + wusb_port_by_idx(wusbhc, port_idx)->change &= ~USB_PORT_STAT_C_RESET; + break; + case USB_PORT_FEAT_C_CONNECTION: + wusb_port_by_idx(wusbhc, port_idx)->change &= ~USB_PORT_STAT_C_CONNECTION; + break; + case USB_PORT_FEAT_ENABLE: + __wusbhc_dev_disable(wusbhc, port_idx); + break; + case USB_PORT_FEAT_C_ENABLE: + wusb_port_by_idx(wusbhc, port_idx)->change &= ~USB_PORT_STAT_C_ENABLE; + break; + case USB_PORT_FEAT_SUSPEND: + case USB_PORT_FEAT_C_SUSPEND: + case 0xffff: /* ??? FIXME */ + dev_err(dev, "(port_idx %d) Clear feat %d/%d UNIMPLEMENTED\n", + port_idx, feature, selector); + /* dump_stack(); */ + result = -ENOSYS; + break; + default: + dev_err(dev, "(port_idx %d) Clear feat %d/%d UNKNOWN\n", + port_idx, feature, selector); + result = -EPIPE; + break; + } + mutex_unlock(&wusbhc->mutex); +error: + d_fnend(4, dev, "(wusbhc %p feat 0x%04x selector %d port_idx %d) = " + "%d\n", wusbhc, feature, selector, port_idx, result); + return result; +} + +/* + * Return the port's status + * + * @wusbhc is assumed referenced and @wusbhc->mutex unlocked. + */ +static int wusbhc_rh_get_port_status(struct wusbhc *wusbhc, u16 port_idx, + u32 *_buf, u16 wLength) +{ + int result = -EINVAL; + u16 *buf = (u16 *) _buf; + + d_fnstart(1, wusbhc->dev, "(wusbhc %p port_idx %u wLength %u)\n", + wusbhc, port_idx, wLength); + if (port_idx > wusbhc->ports_max) + goto error; + mutex_lock(&wusbhc->mutex); + buf[0] = cpu_to_le16(wusb_port_by_idx(wusbhc, port_idx)->status); + buf[1] = cpu_to_le16(wusb_port_by_idx(wusbhc, port_idx)->change); + result = 0; + mutex_unlock(&wusbhc->mutex); +error: + d_fnend(1, wusbhc->dev, "(wusbhc %p) = %d, buffer:\n", wusbhc, result); + d_dump(1, wusbhc->dev, _buf, wLength); + return result; +} + +/* + * Entry point for Root Hub operations + * + * @wusbhc is assumed referenced and @wusbhc->mutex unlocked. + */ +int wusbhc_rh_control(struct usb_hcd *usb_hcd, u16 reqntype, u16 wValue, + u16 wIndex, char *buf, u16 wLength) +{ + int result = -ENOSYS; + struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd); + + switch (reqntype) { + case GetHubDescriptor: + result = wusbhc_rh_get_hub_descr( + wusbhc, wValue, wIndex, + (struct usb_hub_descriptor *) buf, wLength); + break; + case ClearHubFeature: + result = wusbhc_rh_clear_hub_feat(wusbhc, wValue); + break; + case GetHubStatus: + result = wusbhc_rh_get_hub_status(wusbhc, (u32 *)buf, wLength); + break; + + case SetPortFeature: + result = wusbhc_rh_set_port_feat(wusbhc, wValue, wIndex >> 8, + (wIndex & 0xff) - 1); + break; + case ClearPortFeature: + result = wusbhc_rh_clear_port_feat(wusbhc, wValue, wIndex >> 8, + (wIndex & 0xff) - 1); + break; + case GetPortStatus: + result = wusbhc_rh_get_port_status(wusbhc, wIndex - 1, + (u32 *)buf, wLength); + break; + + case SetHubFeature: + default: + dev_err(wusbhc->dev, "%s (%p [%p], %x, %x, %x, %p, %x) " + "UNIMPLEMENTED\n", __func__, usb_hcd, wusbhc, reqntype, + wValue, wIndex, buf, wLength); + /* dump_stack(); */ + result = -ENOSYS; + } + return result; +} +EXPORT_SYMBOL_GPL(wusbhc_rh_control); + +int wusbhc_rh_suspend(struct usb_hcd *usb_hcd) +{ + struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd); + dev_err(wusbhc->dev, "%s (%p [%p]) UNIMPLEMENTED\n", __func__, + usb_hcd, wusbhc); + /* dump_stack(); */ + return -ENOSYS; +} +EXPORT_SYMBOL_GPL(wusbhc_rh_suspend); + +int wusbhc_rh_resume(struct usb_hcd *usb_hcd) +{ + struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd); + dev_err(wusbhc->dev, "%s (%p [%p]) UNIMPLEMENTED\n", __func__, + usb_hcd, wusbhc); + /* dump_stack(); */ + return -ENOSYS; +} +EXPORT_SYMBOL_GPL(wusbhc_rh_resume); + +int wusbhc_rh_start_port_reset(struct usb_hcd *usb_hcd, unsigned port_idx) +{ + struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd); + dev_err(wusbhc->dev, "%s (%p [%p], port_idx %u) UNIMPLEMENTED\n", + __func__, usb_hcd, wusbhc, port_idx); + WARN_ON(1); + return -ENOSYS; +} +EXPORT_SYMBOL_GPL(wusbhc_rh_start_port_reset); + +static void wusb_port_init(struct wusb_port *port) +{ + port->status |= USB_PORT_STAT_HIGH_SPEED; +} + +/* + * Alloc fake port specific fields and status. + */ +int wusbhc_rh_create(struct wusbhc *wusbhc) +{ + int result = -ENOMEM; + size_t port_size, itr; + port_size = wusbhc->ports_max * sizeof(wusbhc->port[0]); + wusbhc->port = kzalloc(port_size, GFP_KERNEL); + if (wusbhc->port == NULL) + goto error_port_alloc; + for (itr = 0; itr < wusbhc->ports_max; itr++) + wusb_port_init(&wusbhc->port[itr]); + result = 0; +error_port_alloc: + return result; +} + +void wusbhc_rh_destroy(struct wusbhc *wusbhc) +{ + kfree(wusbhc->port); +} diff --git a/drivers/usb/wusbcore/security.c b/drivers/usb/wusbcore/security.c new file mode 100644 index 000000000000..a101cad6a8d4 --- /dev/null +++ b/drivers/usb/wusbcore/security.c @@ -0,0 +1,642 @@ +/* + * Wireless USB Host Controller + * Security support: encryption enablement, etc + * + * Copyright (C) 2006 Intel Corporation + * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + * + * + * FIXME: docs + */ +#include <linux/types.h> +#include <linux/usb/ch9.h> +#include <linux/random.h> +#include "wusbhc.h" + +/* + * DEBUG & SECURITY WARNING!!!! + * + * If you enable this past 1, the debug code will weaken the + * cryptographic safety of the system (on purpose, for debugging). + * + * Weaken means: + * we print secret keys and intermediate values all the way, + */ +#undef D_LOCAL +#define D_LOCAL 2 +#include <linux/uwb/debug.h> + +static void wusbhc_set_gtk_callback(struct urb *urb); +static void wusbhc_gtk_rekey_done_work(struct work_struct *work); + +int wusbhc_sec_create(struct wusbhc *wusbhc) +{ + wusbhc->gtk.descr.bLength = sizeof(wusbhc->gtk.descr) + sizeof(wusbhc->gtk.data); + wusbhc->gtk.descr.bDescriptorType = USB_DT_KEY; + wusbhc->gtk.descr.bReserved = 0; + + wusbhc->gtk_index = wusb_key_index(0, WUSB_KEY_INDEX_TYPE_GTK, + WUSB_KEY_INDEX_ORIGINATOR_HOST); + + INIT_WORK(&wusbhc->gtk_rekey_done_work, wusbhc_gtk_rekey_done_work); + + return 0; +} + + +/* Called when the HC is destroyed */ +void wusbhc_sec_destroy(struct wusbhc *wusbhc) +{ +} + + +/** + * wusbhc_next_tkid - generate a new, currently unused, TKID + * @wusbhc: the WUSB host controller + * @wusb_dev: the device whose PTK the TKID is for + * (or NULL for a TKID for a GTK) + * + * The generated TKID consist of two parts: the device's authenicated + * address (or 0 or a GTK); and an incrementing number. This ensures + * that TKIDs cannot be shared between devices and by the time the + * incrementing number wraps around the older TKIDs will no longer be + * in use (a maximum of two keys may be active at any one time). + */ +static u32 wusbhc_next_tkid(struct wusbhc *wusbhc, struct wusb_dev *wusb_dev) +{ + u32 *tkid; + u32 addr; + + if (wusb_dev == NULL) { + tkid = &wusbhc->gtk_tkid; + addr = 0; + } else { + tkid = &wusb_port_by_idx(wusbhc, wusb_dev->port_idx)->ptk_tkid; + addr = wusb_dev->addr & 0x7f; + } + + *tkid = (addr << 8) | ((*tkid + 1) & 0xff); + + return *tkid; +} + +static void wusbhc_generate_gtk(struct wusbhc *wusbhc) +{ + const size_t key_size = sizeof(wusbhc->gtk.data); + u32 tkid; + + tkid = wusbhc_next_tkid(wusbhc, NULL); + + wusbhc->gtk.descr.tTKID[0] = (tkid >> 0) & 0xff; + wusbhc->gtk.descr.tTKID[1] = (tkid >> 8) & 0xff; + wusbhc->gtk.descr.tTKID[2] = (tkid >> 16) & 0xff; + + get_random_bytes(wusbhc->gtk.descr.bKeyData, key_size); +} + +/** + * wusbhc_sec_start - start the security management process + * @wusbhc: the WUSB host controller + * + * Generate and set an initial GTK on the host controller. + * + * Called when the HC is started. + */ +int wusbhc_sec_start(struct wusbhc *wusbhc) +{ + const size_t key_size = sizeof(wusbhc->gtk.data); + int result; + + wusbhc_generate_gtk(wusbhc); + + result = wusbhc->set_gtk(wusbhc, wusbhc->gtk_tkid, + &wusbhc->gtk.descr.bKeyData, key_size); + if (result < 0) + dev_err(wusbhc->dev, "cannot set GTK for the host: %d\n", + result); + + return result; +} + +/** + * wusbhc_sec_stop - stop the security management process + * @wusbhc: the WUSB host controller + * + * Wait for any pending GTK rekeys to stop. + */ +void wusbhc_sec_stop(struct wusbhc *wusbhc) +{ + cancel_work_sync(&wusbhc->gtk_rekey_done_work); +} + + +/** @returns encryption type name */ +const char *wusb_et_name(u8 x) +{ + switch (x) { + case USB_ENC_TYPE_UNSECURE: return "unsecure"; + case USB_ENC_TYPE_WIRED: return "wired"; + case USB_ENC_TYPE_CCM_1: return "CCM-1"; + case USB_ENC_TYPE_RSA_1: return "RSA-1"; + default: return "unknown"; + } +} +EXPORT_SYMBOL_GPL(wusb_et_name); + +/* + * Set the device encryption method + * + * We tell the device which encryption method to use; we do this when + * setting up the device's security. + */ +static int wusb_dev_set_encryption(struct usb_device *usb_dev, int value) +{ + int result; + struct device *dev = &usb_dev->dev; + struct wusb_dev *wusb_dev = usb_dev->wusb_dev; + + if (value) { + value = wusb_dev->ccm1_etd.bEncryptionValue; + } else { + /* FIXME: should be wusb_dev->etd[UNSECURE].bEncryptionValue */ + value = 0; + } + /* Set device's */ + result = usb_control_msg(usb_dev, usb_sndctrlpipe(usb_dev, 0), + USB_REQ_SET_ENCRYPTION, + USB_DIR_OUT | USB_TYPE_STANDARD | USB_RECIP_DEVICE, + value, 0, NULL, 0, 1000 /* FIXME: arbitrary */); + if (result < 0) + dev_err(dev, "Can't set device's WUSB encryption to " + "%s (value %d): %d\n", + wusb_et_name(wusb_dev->ccm1_etd.bEncryptionType), + wusb_dev->ccm1_etd.bEncryptionValue, result); + return result; +} + +/* + * Set the GTK to be used by a device. + * + * The device must be authenticated. + */ +static int wusb_dev_set_gtk(struct wusbhc *wusbhc, struct wusb_dev *wusb_dev) +{ + struct usb_device *usb_dev = wusb_dev->usb_dev; + + return usb_control_msg( + usb_dev, usb_sndctrlpipe(usb_dev, 0), + USB_REQ_SET_DESCRIPTOR, + USB_DIR_OUT | USB_TYPE_STANDARD | USB_RECIP_DEVICE, + USB_DT_KEY << 8 | wusbhc->gtk_index, 0, + &wusbhc->gtk.descr, wusbhc->gtk.descr.bLength, + 1000); +} + + +/* FIXME: prototype for adding security */ +int wusb_dev_sec_add(struct wusbhc *wusbhc, + struct usb_device *usb_dev, struct wusb_dev *wusb_dev) +{ + int result, bytes, secd_size; + struct device *dev = &usb_dev->dev; + struct usb_security_descriptor secd; + const struct usb_encryption_descriptor *etd, *ccm1_etd = NULL; + void *secd_buf; + const void *itr, *top; + char buf[64]; + + d_fnstart(3, dev, "(usb_dev %p, wusb_dev %p)\n", usb_dev, wusb_dev); + result = usb_get_descriptor(usb_dev, USB_DT_SECURITY, + 0, &secd, sizeof(secd)); + if (result < sizeof(secd)) { + dev_err(dev, "Can't read security descriptor or " + "not enough data: %d\n", result); + goto error_secd; + } + secd_size = le16_to_cpu(secd.wTotalLength); + d_printf(5, dev, "got %d bytes of sec descriptor, total is %d\n", + result, secd_size); + secd_buf = kmalloc(secd_size, GFP_KERNEL); + if (secd_buf == NULL) { + dev_err(dev, "Can't allocate space for security descriptors\n"); + goto error_secd_alloc; + } + result = usb_get_descriptor(usb_dev, USB_DT_SECURITY, + 0, secd_buf, secd_size); + if (result < secd_size) { + dev_err(dev, "Can't read security descriptor or " + "not enough data: %d\n", result); + goto error_secd_all; + } + d_printf(5, dev, "got %d bytes of sec descriptors\n", result); + bytes = 0; + itr = secd_buf + sizeof(secd); + top = secd_buf + result; + while (itr < top) { + etd = itr; + if (top - itr < sizeof(*etd)) { + dev_err(dev, "BUG: bad device security descriptor; " + "not enough data (%zu vs %zu bytes left)\n", + top - itr, sizeof(*etd)); + break; + } + if (etd->bLength < sizeof(*etd)) { + dev_err(dev, "BUG: bad device encryption descriptor; " + "descriptor is too short " + "(%u vs %zu needed)\n", + etd->bLength, sizeof(*etd)); + break; + } + itr += etd->bLength; + bytes += snprintf(buf + bytes, sizeof(buf) - bytes, + "%s (0x%02x/%02x) ", + wusb_et_name(etd->bEncryptionType), + etd->bEncryptionValue, etd->bAuthKeyIndex); + if (etd->bEncryptionType == USB_ENC_TYPE_CCM_1) + ccm1_etd = etd; + } + /* This code only supports CCM1 as of now. */ + /* FIXME: user has to choose which sec mode to use? + * In theory we want CCM */ + if (ccm1_etd == NULL) { + dev_err(dev, "WUSB device doesn't support CCM1 encryption, " + "can't use!\n"); + result = -EINVAL; + goto error_no_ccm1; + } + wusb_dev->ccm1_etd = *ccm1_etd; + dev_info(dev, "supported encryption: %s; using %s (0x%02x/%02x)\n", + buf, wusb_et_name(ccm1_etd->bEncryptionType), + ccm1_etd->bEncryptionValue, ccm1_etd->bAuthKeyIndex); + result = 0; + kfree(secd_buf); +out: + d_fnend(3, dev, "(usb_dev %p, wusb_dev %p) = %d\n", + usb_dev, wusb_dev, result); + return result; + + +error_no_ccm1: +error_secd_all: + kfree(secd_buf); +error_secd_alloc: +error_secd: + goto out; +} + +void wusb_dev_sec_rm(struct wusb_dev *wusb_dev) +{ + /* Nothing so far */ +} + +static void hs_printk(unsigned level, struct device *dev, + struct usb_handshake *hs) +{ + d_printf(level, dev, + " bMessageNumber: %u\n" + " bStatus: %u\n" + " tTKID: %02x %02x %02x\n" + " CDID: %02x %02x %02x %02x %02x %02x %02x %02x\n" + " %02x %02x %02x %02x %02x %02x %02x %02x\n" + " nonce: %02x %02x %02x %02x %02x %02x %02x %02x\n" + " %02x %02x %02x %02x %02x %02x %02x %02x\n" + " MIC: %02x %02x %02x %02x %02x %02x %02x %02x\n", + hs->bMessageNumber, hs->bStatus, + hs->tTKID[2], hs->tTKID[1], hs->tTKID[0], + hs->CDID[0], hs->CDID[1], hs->CDID[2], hs->CDID[3], + hs->CDID[4], hs->CDID[5], hs->CDID[6], hs->CDID[7], + hs->CDID[8], hs->CDID[9], hs->CDID[10], hs->CDID[11], + hs->CDID[12], hs->CDID[13], hs->CDID[14], hs->CDID[15], + hs->nonce[0], hs->nonce[1], hs->nonce[2], hs->nonce[3], + hs->nonce[4], hs->nonce[5], hs->nonce[6], hs->nonce[7], + hs->nonce[8], hs->nonce[9], hs->nonce[10], hs->nonce[11], + hs->nonce[12], hs->nonce[13], hs->nonce[14], hs->nonce[15], + hs->MIC[0], hs->MIC[1], hs->MIC[2], hs->MIC[3], + hs->MIC[4], hs->MIC[5], hs->MIC[6], hs->MIC[7]); +} + +/** + * Update the address of an unauthenticated WUSB device + * + * Once we have successfully authenticated, we take it to addr0 state + * and then to a normal address. + * + * Before the device's address (as known by it) was usb_dev->devnum | + * 0x80 (unauthenticated address). With this we update it to usb_dev->devnum. + */ +static int wusb_dev_update_address(struct wusbhc *wusbhc, + struct wusb_dev *wusb_dev) +{ + int result = -ENOMEM; + struct usb_device *usb_dev = wusb_dev->usb_dev; + struct device *dev = &usb_dev->dev; + u8 new_address = wusb_dev->addr & 0x7F; + + /* Set address 0 */ + result = usb_control_msg(usb_dev, usb_sndctrlpipe(usb_dev, 0), + USB_REQ_SET_ADDRESS, 0, + 0, 0, NULL, 0, 1000 /* FIXME: arbitrary */); + if (result < 0) { + dev_err(dev, "auth failed: can't set address 0: %d\n", + result); + goto error_addr0; + } + result = wusb_set_dev_addr(wusbhc, wusb_dev, 0); + if (result < 0) + goto error_addr0; + usb_ep0_reinit(usb_dev); + + /* Set new (authenticated) address. */ + result = usb_control_msg(usb_dev, usb_sndctrlpipe(usb_dev, 0), + USB_REQ_SET_ADDRESS, 0, + new_address, 0, NULL, 0, + 1000 /* FIXME: arbitrary */); + if (result < 0) { + dev_err(dev, "auth failed: can't set address %u: %d\n", + new_address, result); + goto error_addr; + } + result = wusb_set_dev_addr(wusbhc, wusb_dev, new_address); + if (result < 0) + goto error_addr; + usb_ep0_reinit(usb_dev); + usb_dev->authenticated = 1; +error_addr: +error_addr0: + return result; +} + +/* + * + * + */ +/* FIXME: split and cleanup */ +int wusb_dev_4way_handshake(struct wusbhc *wusbhc, struct wusb_dev *wusb_dev, + struct wusb_ckhdid *ck) +{ + int result = -ENOMEM; + struct usb_device *usb_dev = wusb_dev->usb_dev; + struct device *dev = &usb_dev->dev; + u32 tkid; + __le32 tkid_le; + struct usb_handshake *hs; + struct aes_ccm_nonce ccm_n; + u8 mic[8]; + struct wusb_keydvt_in keydvt_in; + struct wusb_keydvt_out keydvt_out; + + hs = kzalloc(3*sizeof(hs[0]), GFP_KERNEL); + if (hs == NULL) { + dev_err(dev, "can't allocate handshake data\n"); + goto error_kzalloc; + } + + /* We need to turn encryption before beginning the 4way + * hshake (WUSB1.0[.3.2.2]) */ + result = wusb_dev_set_encryption(usb_dev, 1); + if (result < 0) + goto error_dev_set_encryption; + + tkid = wusbhc_next_tkid(wusbhc, wusb_dev); + tkid_le = cpu_to_le32(tkid); + + hs[0].bMessageNumber = 1; + hs[0].bStatus = 0; + memcpy(hs[0].tTKID, &tkid_le, sizeof(hs[0].tTKID)); + hs[0].bReserved = 0; + memcpy(hs[0].CDID, &wusb_dev->cdid, sizeof(hs[0].CDID)); + get_random_bytes(&hs[0].nonce, sizeof(hs[0].nonce)); + memset(hs[0].MIC, 0, sizeof(hs[0].MIC)); /* Per WUSB1.0[T7-22] */ + + d_printf(1, dev, "I: sending hs1:\n"); + hs_printk(2, dev, &hs[0]); + + result = usb_control_msg( + usb_dev, usb_sndctrlpipe(usb_dev, 0), + USB_REQ_SET_HANDSHAKE, + USB_DIR_OUT | USB_TYPE_STANDARD | USB_RECIP_DEVICE, + 1, 0, &hs[0], sizeof(hs[0]), 1000 /* FIXME: arbitrary */); + if (result < 0) { + dev_err(dev, "Handshake1: request failed: %d\n", result); + goto error_hs1; + } + + /* Handshake 2, from the device -- need to verify fields */ + result = usb_control_msg( + usb_dev, usb_rcvctrlpipe(usb_dev, 0), + USB_REQ_GET_HANDSHAKE, + USB_DIR_IN | USB_TYPE_STANDARD | USB_RECIP_DEVICE, + 2, 0, &hs[1], sizeof(hs[1]), 1000 /* FIXME: arbitrary */); + if (result < 0) { + dev_err(dev, "Handshake2: request failed: %d\n", result); + goto error_hs2; + } + d_printf(1, dev, "got HS2:\n"); + hs_printk(2, dev, &hs[1]); + + result = -EINVAL; + if (hs[1].bMessageNumber != 2) { + dev_err(dev, "Handshake2 failed: bad message number %u\n", + hs[1].bMessageNumber); + goto error_hs2; + } + if (hs[1].bStatus != 0) { + dev_err(dev, "Handshake2 failed: bad status %u\n", + hs[1].bStatus); + goto error_hs2; + } + if (memcmp(hs[0].tTKID, hs[1].tTKID, sizeof(hs[0].tTKID))) { + dev_err(dev, "Handshake2 failed: TKID mismatch " + "(#1 0x%02x%02x%02x vs #2 0x%02x%02x%02x)\n", + hs[0].tTKID[0], hs[0].tTKID[1], hs[0].tTKID[2], + hs[1].tTKID[0], hs[1].tTKID[1], hs[1].tTKID[2]); + goto error_hs2; + } + if (memcmp(hs[0].CDID, hs[1].CDID, sizeof(hs[0].CDID))) { + dev_err(dev, "Handshake2 failed: CDID mismatch\n"); + goto error_hs2; + } + + /* Setup the CCM nonce */ + memset(&ccm_n.sfn, 0, sizeof(ccm_n.sfn)); /* Per WUSB1.0[6.5.2] */ + memcpy(ccm_n.tkid, &tkid_le, sizeof(ccm_n.tkid)); + ccm_n.src_addr = wusbhc->uwb_rc->uwb_dev.dev_addr; + ccm_n.dest_addr.data[0] = wusb_dev->addr; + ccm_n.dest_addr.data[1] = 0; + + /* Derive the KCK and PTK from CK, the CCM, H and D nonces */ + memcpy(keydvt_in.hnonce, hs[0].nonce, sizeof(keydvt_in.hnonce)); + memcpy(keydvt_in.dnonce, hs[1].nonce, sizeof(keydvt_in.dnonce)); + result = wusb_key_derive(&keydvt_out, ck->data, &ccm_n, &keydvt_in); + if (result < 0) { + dev_err(dev, "Handshake2 failed: cannot derive keys: %d\n", + result); + goto error_hs2; + } + d_printf(2, dev, "KCK:\n"); + d_dump(2, dev, keydvt_out.kck, sizeof(keydvt_out.kck)); + d_printf(2, dev, "PTK:\n"); + d_dump(2, dev, keydvt_out.ptk, sizeof(keydvt_out.ptk)); + + /* Compute MIC and verify it */ + result = wusb_oob_mic(mic, keydvt_out.kck, &ccm_n, &hs[1]); + if (result < 0) { + dev_err(dev, "Handshake2 failed: cannot compute MIC: %d\n", + result); + goto error_hs2; + } + + d_printf(2, dev, "MIC:\n"); + d_dump(2, dev, mic, sizeof(mic)); + if (memcmp(hs[1].MIC, mic, sizeof(hs[1].MIC))) { + dev_err(dev, "Handshake2 failed: MIC mismatch\n"); + goto error_hs2; + } + + /* Send Handshake3 */ + hs[2].bMessageNumber = 3; + hs[2].bStatus = 0; + memcpy(hs[2].tTKID, &tkid_le, sizeof(hs[2].tTKID)); + hs[2].bReserved = 0; + memcpy(hs[2].CDID, &wusb_dev->cdid, sizeof(hs[2].CDID)); + memcpy(hs[2].nonce, hs[0].nonce, sizeof(hs[2].nonce)); + result = wusb_oob_mic(hs[2].MIC, keydvt_out.kck, &ccm_n, &hs[2]); + if (result < 0) { + dev_err(dev, "Handshake3 failed: cannot compute MIC: %d\n", + result); + goto error_hs2; + } + + d_printf(1, dev, "I: sending hs3:\n"); + hs_printk(2, dev, &hs[2]); + + result = usb_control_msg( + usb_dev, usb_sndctrlpipe(usb_dev, 0), + USB_REQ_SET_HANDSHAKE, + USB_DIR_OUT | USB_TYPE_STANDARD | USB_RECIP_DEVICE, + 3, 0, &hs[2], sizeof(hs[2]), 1000 /* FIXME: arbitrary */); + if (result < 0) { + dev_err(dev, "Handshake3: request failed: %d\n", result); + goto error_hs3; + } + + d_printf(1, dev, "I: turning on encryption on host for device\n"); + d_dump(2, dev, keydvt_out.ptk, sizeof(keydvt_out.ptk)); + result = wusbhc->set_ptk(wusbhc, wusb_dev->port_idx, tkid, + keydvt_out.ptk, sizeof(keydvt_out.ptk)); + if (result < 0) + goto error_wusbhc_set_ptk; + + d_printf(1, dev, "I: setting a GTK\n"); + result = wusb_dev_set_gtk(wusbhc, wusb_dev); + if (result < 0) { + dev_err(dev, "Set GTK for device: request failed: %d\n", + result); + goto error_wusbhc_set_gtk; + } + + /* Update the device's address from unauth to auth */ + if (usb_dev->authenticated == 0) { + d_printf(1, dev, "I: updating addres to auth from non-auth\n"); + result = wusb_dev_update_address(wusbhc, wusb_dev); + if (result < 0) + goto error_dev_update_address; + } + result = 0; + d_printf(1, dev, "I: 4way handshke done, device authenticated\n"); + +error_dev_update_address: +error_wusbhc_set_gtk: +error_wusbhc_set_ptk: +error_hs3: +error_hs2: +error_hs1: + memset(hs, 0, 3*sizeof(hs[0])); + memset(&keydvt_out, 0, sizeof(keydvt_out)); + memset(&keydvt_in, 0, sizeof(keydvt_in)); + memset(&ccm_n, 0, sizeof(ccm_n)); + memset(mic, 0, sizeof(mic)); + if (result < 0) { + /* error path */ + wusb_dev_set_encryption(usb_dev, 0); + } +error_dev_set_encryption: + kfree(hs); +error_kzalloc: + return result; +} + +/* + * Once all connected and authenticated devices have received the new + * GTK, switch the host to using it. + */ +static void wusbhc_gtk_rekey_done_work(struct work_struct *work) +{ + struct wusbhc *wusbhc = container_of(work, struct wusbhc, gtk_rekey_done_work); + size_t key_size = sizeof(wusbhc->gtk.data); + + mutex_lock(&wusbhc->mutex); + + if (--wusbhc->pending_set_gtks == 0) + wusbhc->set_gtk(wusbhc, wusbhc->gtk_tkid, &wusbhc->gtk.descr.bKeyData, key_size); + + mutex_unlock(&wusbhc->mutex); +} + +static void wusbhc_set_gtk_callback(struct urb *urb) +{ + struct wusbhc *wusbhc = urb->context; + + queue_work(wusbd, &wusbhc->gtk_rekey_done_work); +} + +/** + * wusbhc_gtk_rekey - generate and distribute a new GTK + * @wusbhc: the WUSB host controller + * + * Generate a new GTK and distribute it to all connected and + * authenticated devices. When all devices have the new GTK, the host + * starts using it. + * + * This must be called after every device disconnect (see [WUSB] + * section 6.2.11.2). + */ +void wusbhc_gtk_rekey(struct wusbhc *wusbhc) +{ + static const size_t key_size = sizeof(wusbhc->gtk.data); + int p; + + wusbhc_generate_gtk(wusbhc); + + for (p = 0; p < wusbhc->ports_max; p++) { + struct wusb_dev *wusb_dev; + + wusb_dev = wusbhc->port[p].wusb_dev; + if (!wusb_dev || !wusb_dev->usb_dev | !wusb_dev->usb_dev->authenticated) + continue; + + usb_fill_control_urb(wusb_dev->set_gtk_urb, wusb_dev->usb_dev, + usb_sndctrlpipe(wusb_dev->usb_dev, 0), + (void *)wusb_dev->set_gtk_req, + &wusbhc->gtk.descr, wusbhc->gtk.descr.bLength, + wusbhc_set_gtk_callback, wusbhc); + if (usb_submit_urb(wusb_dev->set_gtk_urb, GFP_KERNEL) == 0) + wusbhc->pending_set_gtks++; + } + if (wusbhc->pending_set_gtks == 0) + wusbhc->set_gtk(wusbhc, wusbhc->gtk_tkid, &wusbhc->gtk.descr.bKeyData, key_size); +} diff --git a/drivers/usb/wusbcore/wa-hc.c b/drivers/usb/wusbcore/wa-hc.c new file mode 100644 index 000000000000..9d04722415bb --- /dev/null +++ b/drivers/usb/wusbcore/wa-hc.c @@ -0,0 +1,95 @@ +/* + * Wire Adapter Host Controller Driver + * Common items to HWA and DWA based HCDs + * + * Copyright (C) 2005-2006 Intel Corporation + * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + * + * + * FIXME: docs + */ +#include "wusbhc.h" +#include "wa-hc.h" + +/** + * Assumes + * + * wa->usb_dev and wa->usb_iface initialized and refcounted, + * wa->wa_descr initialized. + */ +int wa_create(struct wahc *wa, struct usb_interface *iface) +{ + int result; + struct device *dev = &iface->dev; + + result = wa_rpipes_create(wa); + if (result < 0) + goto error_rpipes_create; + /* Fill up Data Transfer EP pointers */ + wa->dti_epd = &iface->cur_altsetting->endpoint[1].desc; + wa->dto_epd = &iface->cur_altsetting->endpoint[2].desc; + wa->xfer_result_size = le16_to_cpu(wa->dti_epd->wMaxPacketSize); + wa->xfer_result = kmalloc(wa->xfer_result_size, GFP_KERNEL); + if (wa->xfer_result == NULL) + goto error_xfer_result_alloc; + result = wa_nep_create(wa, iface); + if (result < 0) { + dev_err(dev, "WA-CDS: can't initialize notif endpoint: %d\n", + result); + goto error_nep_create; + } + return 0; + +error_nep_create: + kfree(wa->xfer_result); +error_xfer_result_alloc: + wa_rpipes_destroy(wa); +error_rpipes_create: + return result; +} +EXPORT_SYMBOL_GPL(wa_create); + + +void __wa_destroy(struct wahc *wa) +{ + if (wa->dti_urb) { + usb_kill_urb(wa->dti_urb); + usb_put_urb(wa->dti_urb); + usb_kill_urb(wa->buf_in_urb); + usb_put_urb(wa->buf_in_urb); + } + kfree(wa->xfer_result); + wa_nep_destroy(wa); + wa_rpipes_destroy(wa); +} +EXPORT_SYMBOL_GPL(__wa_destroy); + +/** + * wa_reset_all - reset the WA device + * @wa: the WA to be reset + * + * For HWAs the radio controller and all other PALs are also reset. + */ +void wa_reset_all(struct wahc *wa) +{ + /* FIXME: assuming HWA. */ + wusbhc_reset_all(wa->wusb); +} + +MODULE_AUTHOR("Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>"); +MODULE_DESCRIPTION("Wireless USB Wire Adapter core"); +MODULE_LICENSE("GPL"); diff --git a/drivers/usb/wusbcore/wa-hc.h b/drivers/usb/wusbcore/wa-hc.h new file mode 100644 index 000000000000..586d350cdb4d --- /dev/null +++ b/drivers/usb/wusbcore/wa-hc.h @@ -0,0 +1,417 @@ +/* + * HWA Host Controller Driver + * Wire Adapter Control/Data Streaming Iface (WUSB1.0[8]) + * + * Copyright (C) 2005-2006 Intel Corporation + * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + * + * + * This driver implements a USB Host Controller (struct usb_hcd) for a + * Wireless USB Host Controller based on the Wireless USB 1.0 + * Host-Wire-Adapter specification (in layman terms, a USB-dongle that + * implements a Wireless USB host). + * + * Check out the Design-overview.txt file in the source documentation + * for other details on the implementation. + * + * Main blocks: + * + * driver glue with the driver API, workqueue daemon + * + * lc RC instance life cycle management (create, destroy...) + * + * hcd glue with the USB API Host Controller Interface API. + * + * nep Notification EndPoint managent: collect notifications + * and queue them with the workqueue daemon. + * + * Handle notifications as coming from the NEP. Sends them + * off others to their respective modules (eg: connect, + * disconnect and reset go to devconnect). + * + * rpipe Remote Pipe management; rpipe is what we use to write + * to an endpoint on a WUSB device that is connected to a + * HWA RC. + * + * xfer Transfer managment -- this is all the code that gets a + * buffer and pushes it to a device (or viceversa). * + * + * Some day a lot of this code will be shared between this driver and + * the drivers for DWA (xfer, rpipe). + * + * All starts at driver.c:hwahc_probe(), when one of this guys is + * connected. hwahc_disconnect() stops it. + * + * During operation, the main driver is devices connecting or + * disconnecting. They cause the HWA RC to send notifications into + * nep.c:hwahc_nep_cb() that will dispatch them to + * notif.c:wa_notif_dispatch(). From there they will fan to cause + * device connects, disconnects, etc. + * + * Note much of the activity is difficult to follow. For example a + * device connect goes to devconnect, which will cause the "fake" root + * hub port to show a connect and stop there. Then khubd will notice + * and call into the rh.c:hwahc_rc_port_reset() code to authenticate + * the device (and this might require user intervention) and enable + * the port. + * + * We also have a timer workqueue going from devconnect.c that + * schedules in hwahc_devconnect_create(). + * + * The rest of the traffic is in the usual entry points of a USB HCD, + * which are hooked up in driver.c:hwahc_rc_driver, and defined in + * hcd.c. + */ + +#ifndef __HWAHC_INTERNAL_H__ +#define __HWAHC_INTERNAL_H__ + +#include <linux/completion.h> +#include <linux/usb.h> +#include <linux/mutex.h> +#include <linux/spinlock.h> +#include <linux/uwb.h> +#include <linux/usb/wusb.h> +#include <linux/usb/wusb-wa.h> + +struct wusbhc; +struct wahc; +extern void wa_urb_enqueue_run(struct work_struct *ws); + +/** + * RPipe instance + * + * @descr's fields are kept in LE, as we need to send it back and + * forth. + * + * @wa is referenced when set + * + * @segs_available is the number of requests segments that still can + * be submitted to the controller without overloading + * it. It is initialized to descr->wRequests when + * aiming. + * + * A rpipe supports a max of descr->wRequests at the same time; before + * submitting seg_lock has to be taken. If segs_avail > 0, then we can + * submit; if not, we have to queue them. + */ +struct wa_rpipe { + struct kref refcnt; + struct usb_rpipe_descriptor descr; + struct usb_host_endpoint *ep; + struct wahc *wa; + spinlock_t seg_lock; + struct list_head seg_list; + atomic_t segs_available; + u8 buffer[1]; /* For reads/writes on USB */ +}; + + +/** + * Instance of a HWA Host Controller + * + * Except where a more specific lock/mutex applies or atomic, all + * fields protected by @mutex. + * + * @wa_descr Can be accessed without locking because it is in + * the same area where the device descriptors were + * read, so it is guaranteed to exist umodified while + * the device exists. + * + * Endianess has been converted to CPU's. + * + * @nep_* can be accessed without locking as its processing is + * serialized; we submit a NEP URB and it comes to + * hwahc_nep_cb(), which won't issue another URB until it is + * done processing it. + * + * @xfer_list: + * + * List of active transfers to verify existence from a xfer id + * gotten from the xfer result message. Can't use urb->list because + * it goes by endpoint, and we don't know the endpoint at the time + * when we get the xfer result message. We can't really rely on the + * pointer (will have to change for 64 bits) as the xfer id is 32 bits. + * + * @xfer_delayed_list: List of transfers that need to be started + * (with a workqueue, because they were + * submitted from an atomic context). + * + * FIXME: this needs to be layered up: a wusbhc layer (for sharing + * comonalities with WHCI), a wa layer (for sharing + * comonalities with DWA-RC). + */ +struct wahc { + struct usb_device *usb_dev; + struct usb_interface *usb_iface; + + /* HC to deliver notifications */ + union { + struct wusbhc *wusb; + struct dwahc *dwa; + }; + + const struct usb_endpoint_descriptor *dto_epd, *dti_epd; + const struct usb_wa_descriptor *wa_descr; + + struct urb *nep_urb; /* Notification EndPoint [lockless] */ + struct edc nep_edc; + void *nep_buffer; + size_t nep_buffer_size; + + atomic_t notifs_queued; + + u16 rpipes; + unsigned long *rpipe_bm; /* rpipe usage bitmap */ + spinlock_t rpipe_bm_lock; /* protect rpipe_bm */ + struct mutex rpipe_mutex; /* assigning resources to endpoints */ + + struct urb *dti_urb; /* URB for reading xfer results */ + struct urb *buf_in_urb; /* URB for reading data in */ + struct edc dti_edc; /* DTI error density counter */ + struct wa_xfer_result *xfer_result; /* real size = dti_ep maxpktsize */ + size_t xfer_result_size; + + s32 status; /* For reading status */ + + struct list_head xfer_list; + struct list_head xfer_delayed_list; + spinlock_t xfer_list_lock; + struct work_struct xfer_work; + atomic_t xfer_id_count; +}; + + +extern int wa_create(struct wahc *wa, struct usb_interface *iface); +extern void __wa_destroy(struct wahc *wa); +void wa_reset_all(struct wahc *wa); + + +/* Miscellaneous constants */ +enum { + /** Max number of EPROTO errors we tolerate on the NEP in a + * period of time */ + HWAHC_EPROTO_MAX = 16, + /** Period of time for EPROTO errors (in jiffies) */ + HWAHC_EPROTO_PERIOD = 4 * HZ, +}; + + +/* Notification endpoint handling */ +extern int wa_nep_create(struct wahc *, struct usb_interface *); +extern void wa_nep_destroy(struct wahc *); + +static inline int wa_nep_arm(struct wahc *wa, gfp_t gfp_mask) +{ + struct urb *urb = wa->nep_urb; + urb->transfer_buffer = wa->nep_buffer; + urb->transfer_buffer_length = wa->nep_buffer_size; + return usb_submit_urb(urb, gfp_mask); +} + +static inline void wa_nep_disarm(struct wahc *wa) +{ + usb_kill_urb(wa->nep_urb); +} + + +/* RPipes */ +static inline void wa_rpipe_init(struct wahc *wa) +{ + spin_lock_init(&wa->rpipe_bm_lock); + mutex_init(&wa->rpipe_mutex); +} + +static inline void wa_init(struct wahc *wa) +{ + edc_init(&wa->nep_edc); + atomic_set(&wa->notifs_queued, 0); + wa_rpipe_init(wa); + edc_init(&wa->dti_edc); + INIT_LIST_HEAD(&wa->xfer_list); + INIT_LIST_HEAD(&wa->xfer_delayed_list); + spin_lock_init(&wa->xfer_list_lock); + INIT_WORK(&wa->xfer_work, wa_urb_enqueue_run); + atomic_set(&wa->xfer_id_count, 1); +} + +/** + * Destroy a pipe (when refcount drops to zero) + * + * Assumes it has been moved to the "QUIESCING" state. + */ +struct wa_xfer; +extern void rpipe_destroy(struct kref *_rpipe); +static inline +void __rpipe_get(struct wa_rpipe *rpipe) +{ + kref_get(&rpipe->refcnt); +} +extern int rpipe_get_by_ep(struct wahc *, struct usb_host_endpoint *, + struct urb *, gfp_t); +static inline void rpipe_put(struct wa_rpipe *rpipe) +{ + kref_put(&rpipe->refcnt, rpipe_destroy); + +} +extern void rpipe_ep_disable(struct wahc *, struct usb_host_endpoint *); +extern int wa_rpipes_create(struct wahc *); +extern void wa_rpipes_destroy(struct wahc *); +static inline void rpipe_avail_dec(struct wa_rpipe *rpipe) +{ + atomic_dec(&rpipe->segs_available); +} + +/** + * Returns true if the rpipe is ready to submit more segments. + */ +static inline int rpipe_avail_inc(struct wa_rpipe *rpipe) +{ + return atomic_inc_return(&rpipe->segs_available) > 0 + && !list_empty(&rpipe->seg_list); +} + + +/* Transferring data */ +extern int wa_urb_enqueue(struct wahc *, struct usb_host_endpoint *, + struct urb *, gfp_t); +extern int wa_urb_dequeue(struct wahc *, struct urb *); +extern void wa_handle_notif_xfer(struct wahc *, struct wa_notif_hdr *); + + +/* Misc + * + * FIXME: Refcounting for the actual @hwahc object is not correct; I + * mean, this should be refcounting on the HCD underneath, but + * it is not. In any case, the semantics for HCD refcounting + * are *weird*...on refcount reaching zero it just frees + * it...no RC specific function is called...unless I miss + * something. + * + * FIXME: has to go away in favour of an 'struct' hcd based sollution + */ +static inline struct wahc *wa_get(struct wahc *wa) +{ + usb_get_intf(wa->usb_iface); + return wa; +} + +static inline void wa_put(struct wahc *wa) +{ + usb_put_intf(wa->usb_iface); +} + + +static inline int __wa_feature(struct wahc *wa, unsigned op, u16 feature) +{ + return usb_control_msg(wa->usb_dev, usb_sndctrlpipe(wa->usb_dev, 0), + op ? USB_REQ_SET_FEATURE : USB_REQ_CLEAR_FEATURE, + USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE, + feature, + wa->usb_iface->cur_altsetting->desc.bInterfaceNumber, + NULL, 0, 1000 /* FIXME: arbitrary */); +} + + +static inline int __wa_set_feature(struct wahc *wa, u16 feature) +{ + return __wa_feature(wa, 1, feature); +} + + +static inline int __wa_clear_feature(struct wahc *wa, u16 feature) +{ + return __wa_feature(wa, 0, feature); +} + + +/** + * Return the status of a Wire Adapter + * + * @wa: Wire Adapter instance + * @returns < 0 errno code on error, or status bitmap as described + * in WUSB1.0[8.3.1.6]. + * + * NOTE: need malloc, some arches don't take USB from the stack + */ +static inline +s32 __wa_get_status(struct wahc *wa) +{ + s32 result; + result = usb_control_msg( + wa->usb_dev, usb_rcvctrlpipe(wa->usb_dev, 0), + USB_REQ_GET_STATUS, + USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE, + 0, wa->usb_iface->cur_altsetting->desc.bInterfaceNumber, + &wa->status, sizeof(wa->status), + 1000 /* FIXME: arbitrary */); + if (result >= 0) + result = wa->status; + return result; +} + + +/** + * Waits until the Wire Adapter's status matches @mask/@value + * + * @wa: Wire Adapter instance. + * @returns < 0 errno code on error, otherwise status. + * + * Loop until the WAs status matches the mask and value (status & mask + * == value). Timeout if it doesn't happen. + * + * FIXME: is there an official specification on how long status + * changes can take? + */ +static inline s32 __wa_wait_status(struct wahc *wa, u32 mask, u32 value) +{ + s32 result; + unsigned loops = 10; + do { + msleep(50); + result = __wa_get_status(wa); + if ((result & mask) == value) + break; + if (loops-- == 0) { + result = -ETIMEDOUT; + break; + } + } while (result >= 0); + return result; +} + + +/** Command @hwahc to stop, @returns 0 if ok, < 0 errno code on error */ +static inline int __wa_stop(struct wahc *wa) +{ + int result; + struct device *dev = &wa->usb_iface->dev; + + result = __wa_clear_feature(wa, WA_ENABLE); + if (result < 0 && result != -ENODEV) { + dev_err(dev, "error commanding HC to stop: %d\n", result); + goto out; + } + result = __wa_wait_status(wa, WA_ENABLE, 0); + if (result < 0 && result != -ENODEV) + dev_err(dev, "error waiting for HC to stop: %d\n", result); +out: + return 0; +} + + +#endif /* #ifndef __HWAHC_INTERNAL_H__ */ diff --git a/drivers/usb/wusbcore/wa-nep.c b/drivers/usb/wusbcore/wa-nep.c new file mode 100644 index 000000000000..3f542990c73f --- /dev/null +++ b/drivers/usb/wusbcore/wa-nep.c @@ -0,0 +1,310 @@ +/* + * WUSB Wire Adapter: Control/Data Streaming Interface (WUSB[8]) + * Notification EndPoint support + * + * Copyright (C) 2006 Intel Corporation + * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + * + * + * This part takes care of getting the notification from the hw + * only and dispatching through wusbwad into + * wa_notif_dispatch. Handling is done there. + * + * WA notifications are limited in size; most of them are three or + * four bytes long, and the longest is the HWA Device Notification, + * which would not exceed 38 bytes (DNs are limited in payload to 32 + * bytes plus 3 bytes header (WUSB1.0[7.6p2]), plus 3 bytes HWA + * header (WUSB1.0[8.5.4.2]). + * + * It is not clear if more than one Device Notification can be packed + * in a HWA Notification, I assume no because of the wording in + * WUSB1.0[8.5.4.2]. In any case, the bigger any notification could + * get is 256 bytes (as the bLength field is a byte). + * + * So what we do is we have this buffer and read into it; when a + * notification arrives we schedule work to a specific, single thread + * workqueue (so notifications are serialized) and copy the + * notification data. After scheduling the work, we rearm the read from + * the notification endpoint. + * + * Entry points here are: + * + * wa_nep_[create|destroy]() To initialize/release this subsystem + * + * wa_nep_cb() Callback for the notification + * endpoint; when data is ready, this + * does the dispatching. + */ +#include <linux/workqueue.h> +#include <linux/ctype.h> +#include <linux/uwb/debug.h> +#include "wa-hc.h" +#include "wusbhc.h" + +/* Structure for queueing notifications to the workqueue */ +struct wa_notif_work { + struct work_struct work; + struct wahc *wa; + size_t size; + u8 data[]; +}; + +/* + * Process incoming notifications from the WA's Notification EndPoint + * [the wuswad daemon, basically] + * + * @_nw: Pointer to a descriptor which has the pointer to the + * @wa, the size of the buffer and the work queue + * structure (so we can free all when done). + * @returns 0 if ok, < 0 errno code on error. + * + * All notifications follow the same format; they need to start with a + * 'struct wa_notif_hdr' header, so it is easy to parse through + * them. We just break the buffer in individual notifications (the + * standard doesn't say if it can be done or is forbidden, so we are + * cautious) and dispatch each. + * + * So the handling layers are is: + * + * WA specific notification (from NEP) + * Device Notification Received -> wa_handle_notif_dn() + * WUSB Device notification generic handling + * BPST Adjustment -> wa_handle_notif_bpst_adj() + * ... -> ... + * + * @wa has to be referenced + */ +static void wa_notif_dispatch(struct work_struct *ws) +{ + void *itr; + u8 missing = 0; + struct wa_notif_work *nw = container_of(ws, struct wa_notif_work, work); + struct wahc *wa = nw->wa; + struct wa_notif_hdr *notif_hdr; + size_t size; + + struct device *dev = &wa->usb_iface->dev; + +#if 0 + /* FIXME: need to check for this??? */ + if (usb_hcd->state == HC_STATE_QUIESCING) /* Going down? */ + goto out; /* screw it */ +#endif + atomic_dec(&wa->notifs_queued); /* Throttling ctl */ + dev = &wa->usb_iface->dev; + size = nw->size; + itr = nw->data; + + while (size) { + if (size < sizeof(*notif_hdr)) { + missing = sizeof(*notif_hdr) - size; + goto exhausted_buffer; + } + notif_hdr = itr; + if (size < notif_hdr->bLength) + goto exhausted_buffer; + itr += notif_hdr->bLength; + size -= notif_hdr->bLength; + /* Dispatch the notification [don't use itr or size!] */ + switch (notif_hdr->bNotifyType) { + case HWA_NOTIF_DN: { + struct hwa_notif_dn *hwa_dn; + hwa_dn = container_of(notif_hdr, struct hwa_notif_dn, + hdr); + wusbhc_handle_dn(wa->wusb, hwa_dn->bSourceDeviceAddr, + hwa_dn->dndata, + notif_hdr->bLength - sizeof(*hwa_dn)); + break; + } + case WA_NOTIF_TRANSFER: + wa_handle_notif_xfer(wa, notif_hdr); + break; + case DWA_NOTIF_RWAKE: + case DWA_NOTIF_PORTSTATUS: + case HWA_NOTIF_BPST_ADJ: + /* FIXME: unimplemented WA NOTIFs */ + /* fallthru */ + default: + if (printk_ratelimit()) { + dev_err(dev, "HWA: unknown notification 0x%x, " + "%zu bytes; discarding\n", + notif_hdr->bNotifyType, + (size_t)notif_hdr->bLength); + dump_bytes(dev, notif_hdr, 16); + } + break; + } + } +out: + wa_put(wa); + kfree(nw); + return; + + /* THIS SHOULD NOT HAPPEN + * + * Buffer exahusted with partial data remaining; just warn and + * discard the data, as this should not happen. + */ +exhausted_buffer: + if (!printk_ratelimit()) + goto out; + dev_warn(dev, "HWA: device sent short notification, " + "%d bytes missing; discarding %d bytes.\n", + missing, (int)size); + dump_bytes(dev, itr, size); + goto out; +} + +/* + * Deliver incoming WA notifications to the wusbwa workqueue + * + * @wa: Pointer the Wire Adapter Controller Data Streaming + * instance (part of an 'struct usb_hcd'). + * @size: Size of the received buffer + * @returns 0 if ok, < 0 errno code on error. + * + * The input buffer is @wa->nep_buffer, with @size bytes + * (guaranteed to fit in the allocated space, + * @wa->nep_buffer_size). + */ +static int wa_nep_queue(struct wahc *wa, size_t size) +{ + int result = 0; + struct device *dev = &wa->usb_iface->dev; + struct wa_notif_work *nw; + + /* dev_fnstart(dev, "(wa %p, size %zu)\n", wa, size); */ + BUG_ON(size > wa->nep_buffer_size); + if (size == 0) + goto out; + if (atomic_read(&wa->notifs_queued) > 200) { + if (printk_ratelimit()) + dev_err(dev, "Too many notifications queued, " + "throttling back\n"); + goto out; + } + nw = kzalloc(sizeof(*nw) + size, GFP_ATOMIC); + if (nw == NULL) { + if (printk_ratelimit()) + dev_err(dev, "No memory to queue notification\n"); + goto out; + } + INIT_WORK(&nw->work, wa_notif_dispatch); + nw->wa = wa_get(wa); + nw->size = size; + memcpy(nw->data, wa->nep_buffer, size); + atomic_inc(&wa->notifs_queued); /* Throttling ctl */ + queue_work(wusbd, &nw->work); +out: + /* dev_fnend(dev, "(wa %p, size %zu) = result\n", wa, size, result); */ + return result; +} + +/* + * Callback for the notification event endpoint + * + * Check's that everything is fine and then passes the data to be + * queued to the workqueue. + */ +static void wa_nep_cb(struct urb *urb) +{ + int result; + struct wahc *wa = urb->context; + struct device *dev = &wa->usb_iface->dev; + + switch (result = urb->status) { + case 0: + result = wa_nep_queue(wa, urb->actual_length); + if (result < 0) + dev_err(dev, "NEP: unable to process notification(s): " + "%d\n", result); + break; + case -ECONNRESET: /* Not an error, but a controlled situation; */ + case -ENOENT: /* (we killed the URB)...so, no broadcast */ + case -ESHUTDOWN: + dev_dbg(dev, "NEP: going down %d\n", urb->status); + goto out; + default: /* On general errors, we retry unless it gets ugly */ + if (edc_inc(&wa->nep_edc, EDC_MAX_ERRORS, + EDC_ERROR_TIMEFRAME)) { + dev_err(dev, "NEP: URB max acceptable errors " + "exceeded, resetting device\n"); + wa_reset_all(wa); + goto out; + } + dev_err(dev, "NEP: URB error %d\n", urb->status); + } + result = wa_nep_arm(wa, GFP_ATOMIC); + if (result < 0) { + dev_err(dev, "NEP: cannot submit URB: %d\n", result); + wa_reset_all(wa); + } +out: + return; +} + +/* + * Initialize @wa's notification and event's endpoint stuff + * + * This includes the allocating the read buffer, the context ID + * allocation bitmap, the URB and submitting the URB. + */ +int wa_nep_create(struct wahc *wa, struct usb_interface *iface) +{ + int result; + struct usb_endpoint_descriptor *epd; + struct usb_device *usb_dev = interface_to_usbdev(iface); + struct device *dev = &iface->dev; + + edc_init(&wa->nep_edc); + epd = &iface->cur_altsetting->endpoint[0].desc; + wa->nep_buffer_size = 1024; + wa->nep_buffer = kmalloc(wa->nep_buffer_size, GFP_KERNEL); + if (wa->nep_buffer == NULL) { + dev_err(dev, "Unable to allocate notification's read buffer\n"); + goto error_nep_buffer; + } + wa->nep_urb = usb_alloc_urb(0, GFP_KERNEL); + if (wa->nep_urb == NULL) { + dev_err(dev, "Unable to allocate notification URB\n"); + goto error_urb_alloc; + } + usb_fill_int_urb(wa->nep_urb, usb_dev, + usb_rcvintpipe(usb_dev, epd->bEndpointAddress), + wa->nep_buffer, wa->nep_buffer_size, + wa_nep_cb, wa, epd->bInterval); + result = wa_nep_arm(wa, GFP_KERNEL); + if (result < 0) { + dev_err(dev, "Cannot submit notification URB: %d\n", result); + goto error_nep_arm; + } + return 0; + +error_nep_arm: + usb_free_urb(wa->nep_urb); +error_urb_alloc: + kfree(wa->nep_buffer); +error_nep_buffer: + return -ENOMEM; +} + +void wa_nep_destroy(struct wahc *wa) +{ + wa_nep_disarm(wa); + usb_free_urb(wa->nep_urb); + kfree(wa->nep_buffer); +} diff --git a/drivers/usb/wusbcore/wa-rpipe.c b/drivers/usb/wusbcore/wa-rpipe.c new file mode 100644 index 000000000000..f18e4aae66e9 --- /dev/null +++ b/drivers/usb/wusbcore/wa-rpipe.c @@ -0,0 +1,562 @@ +/* + * WUSB Wire Adapter + * rpipe management + * + * Copyright (C) 2005-2006 Intel Corporation + * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + * + * + * FIXME: docs + * + * RPIPE + * + * Targetted at different downstream endpoints + * + * Descriptor: use to config the remote pipe. + * + * The number of blocks could be dynamic (wBlocks in descriptor is + * 0)--need to schedule them then. + * + * Each bit in wa->rpipe_bm represents if an rpipe is being used or + * not. Rpipes are represented with a 'struct wa_rpipe' that is + * attached to the hcpriv member of a 'struct usb_host_endpoint'. + * + * When you need to xfer data to an endpoint, you get an rpipe for it + * with wa_ep_rpipe_get(), which gives you a reference to the rpipe + * and keeps a single one (the first one) with the endpoint. When you + * are done transferring, you drop that reference. At the end the + * rpipe is always allocated and bound to the endpoint. There it might + * be recycled when not used. + * + * Addresses: + * + * We use a 1:1 mapping mechanism between port address (0 based + * index, actually) and the address. The USB stack knows about this. + * + * USB Stack port number 4 (1 based) + * WUSB code port index 3 (0 based) + * USB Addresss 5 (2 based -- 0 is for default, 1 for root hub) + * + * Now, because we don't use the concept as default address exactly + * like the (wired) USB code does, we need to kind of skip it. So we + * never take addresses from the urb->pipe, but from the + * urb->dev->devnum, to make sure that we always have the right + * destination address. + */ +#include <linux/init.h> +#include <asm/atomic.h> +#include <linux/bitmap.h> +#include "wusbhc.h" +#include "wa-hc.h" + +#define D_LOCAL 0 +#include <linux/uwb/debug.h> + + +static int __rpipe_get_descr(struct wahc *wa, + struct usb_rpipe_descriptor *descr, u16 index) +{ + ssize_t result; + struct device *dev = &wa->usb_iface->dev; + + /* Get the RPIPE descriptor -- we cannot use the usb_get_descriptor() + * function because the arguments are different. + */ + d_printf(1, dev, "rpipe %u: get descr\n", index); + result = usb_control_msg( + wa->usb_dev, usb_rcvctrlpipe(wa->usb_dev, 0), + USB_REQ_GET_DESCRIPTOR, + USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_RPIPE, + USB_DT_RPIPE<<8, index, descr, sizeof(*descr), + 1000 /* FIXME: arbitrary */); + if (result < 0) { + dev_err(dev, "rpipe %u: get descriptor failed: %d\n", + index, (int)result); + goto error; + } + if (result < sizeof(*descr)) { + dev_err(dev, "rpipe %u: got short descriptor " + "(%zd vs %zd bytes needed)\n", + index, result, sizeof(*descr)); + result = -EINVAL; + goto error; + } + result = 0; + +error: + return result; +} + +/* + * + * The descriptor is assumed to be properly initialized (ie: you got + * it through __rpipe_get_descr()). + */ +static int __rpipe_set_descr(struct wahc *wa, + struct usb_rpipe_descriptor *descr, u16 index) +{ + ssize_t result; + struct device *dev = &wa->usb_iface->dev; + + /* we cannot use the usb_get_descriptor() function because the + * arguments are different. + */ + d_printf(1, dev, "rpipe %u: set descr\n", index); + result = usb_control_msg( + wa->usb_dev, usb_sndctrlpipe(wa->usb_dev, 0), + USB_REQ_SET_DESCRIPTOR, + USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_RPIPE, + USB_DT_RPIPE<<8, index, descr, sizeof(*descr), + HZ / 10); + if (result < 0) { + dev_err(dev, "rpipe %u: set descriptor failed: %d\n", + index, (int)result); + goto error; + } + if (result < sizeof(*descr)) { + dev_err(dev, "rpipe %u: sent short descriptor " + "(%zd vs %zd bytes required)\n", + index, result, sizeof(*descr)); + result = -EINVAL; + goto error; + } + result = 0; + +error: + return result; + +} + +static void rpipe_init(struct wa_rpipe *rpipe) +{ + kref_init(&rpipe->refcnt); + spin_lock_init(&rpipe->seg_lock); + INIT_LIST_HEAD(&rpipe->seg_list); +} + +static unsigned rpipe_get_idx(struct wahc *wa, unsigned rpipe_idx) +{ + unsigned long flags; + + spin_lock_irqsave(&wa->rpipe_bm_lock, flags); + rpipe_idx = find_next_zero_bit(wa->rpipe_bm, wa->rpipes, rpipe_idx); + if (rpipe_idx < wa->rpipes) + set_bit(rpipe_idx, wa->rpipe_bm); + spin_unlock_irqrestore(&wa->rpipe_bm_lock, flags); + + return rpipe_idx; +} + +static void rpipe_put_idx(struct wahc *wa, unsigned rpipe_idx) +{ + unsigned long flags; + + spin_lock_irqsave(&wa->rpipe_bm_lock, flags); + clear_bit(rpipe_idx, wa->rpipe_bm); + spin_unlock_irqrestore(&wa->rpipe_bm_lock, flags); +} + +void rpipe_destroy(struct kref *_rpipe) +{ + struct wa_rpipe *rpipe = container_of(_rpipe, struct wa_rpipe, refcnt); + u8 index = le16_to_cpu(rpipe->descr.wRPipeIndex); + d_fnstart(1, NULL, "(rpipe %p %u)\n", rpipe, index); + if (rpipe->ep) + rpipe->ep->hcpriv = NULL; + rpipe_put_idx(rpipe->wa, index); + wa_put(rpipe->wa); + kfree(rpipe); + d_fnend(1, NULL, "(rpipe %p %u)\n", rpipe, index); +} +EXPORT_SYMBOL_GPL(rpipe_destroy); + +/* + * Locate an idle rpipe, create an structure for it and return it + * + * @wa is referenced and unlocked + * @crs enum rpipe_attr, required endpoint characteristics + * + * The rpipe can be used only sequentially (not in parallel). + * + * The rpipe is moved into the "ready" state. + */ +static int rpipe_get_idle(struct wa_rpipe **prpipe, struct wahc *wa, u8 crs, + gfp_t gfp) +{ + int result; + unsigned rpipe_idx; + struct wa_rpipe *rpipe; + struct device *dev = &wa->usb_iface->dev; + + d_fnstart(3, dev, "(wa %p crs 0x%02x)\n", wa, crs); + rpipe = kzalloc(sizeof(*rpipe), gfp); + if (rpipe == NULL) + return -ENOMEM; + rpipe_init(rpipe); + + /* Look for an idle pipe */ + for (rpipe_idx = 0; rpipe_idx < wa->rpipes; rpipe_idx++) { + rpipe_idx = rpipe_get_idx(wa, rpipe_idx); + if (rpipe_idx >= wa->rpipes) /* no more pipes :( */ + break; + result = __rpipe_get_descr(wa, &rpipe->descr, rpipe_idx); + if (result < 0) + dev_err(dev, "Can't get descriptor for rpipe %u: %d\n", + rpipe_idx, result); + else if ((rpipe->descr.bmCharacteristics & crs) != 0) + goto found; + rpipe_put_idx(wa, rpipe_idx); + } + *prpipe = NULL; + kfree(rpipe); + d_fnend(3, dev, "(wa %p crs 0x%02x) = -ENXIO\n", wa, crs); + return -ENXIO; + +found: + set_bit(rpipe_idx, wa->rpipe_bm); + rpipe->wa = wa_get(wa); + *prpipe = rpipe; + d_fnstart(3, dev, "(wa %p crs 0x%02x) = 0\n", wa, crs); + return 0; +} + +static int __rpipe_reset(struct wahc *wa, unsigned index) +{ + int result; + struct device *dev = &wa->usb_iface->dev; + + d_printf(1, dev, "rpipe %u: reset\n", index); + result = usb_control_msg( + wa->usb_dev, usb_sndctrlpipe(wa->usb_dev, 0), + USB_REQ_RPIPE_RESET, + USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_RPIPE, + 0, index, NULL, 0, 1000 /* FIXME: arbitrary */); + if (result < 0) + dev_err(dev, "rpipe %u: reset failed: %d\n", + index, result); + return result; +} + +/* + * Fake companion descriptor for ep0 + * + * See WUSB1.0[7.4.4], most of this is zero for bulk/int/ctl + */ +static struct usb_wireless_ep_comp_descriptor epc0 = { + .bLength = sizeof(epc0), + .bDescriptorType = USB_DT_WIRELESS_ENDPOINT_COMP, +/* .bMaxBurst = 1, */ + .bMaxSequence = 31, +}; + +/* + * Look for EP companion descriptor + * + * Get there, look for Inara in the endpoint's extra descriptors + */ +static struct usb_wireless_ep_comp_descriptor *rpipe_epc_find( + struct device *dev, struct usb_host_endpoint *ep) +{ + void *itr; + size_t itr_size; + struct usb_descriptor_header *hdr; + struct usb_wireless_ep_comp_descriptor *epcd; + + d_fnstart(3, dev, "(ep %p)\n", ep); + if (ep->desc.bEndpointAddress == 0) { + epcd = &epc0; + goto out; + } + itr = ep->extra; + itr_size = ep->extralen; + epcd = NULL; + while (itr_size > 0) { + if (itr_size < sizeof(*hdr)) { + dev_err(dev, "HW Bug? ep 0x%02x: extra descriptors " + "at offset %zu: only %zu bytes left\n", + ep->desc.bEndpointAddress, + itr - (void *) ep->extra, itr_size); + break; + } + hdr = itr; + if (hdr->bDescriptorType == USB_DT_WIRELESS_ENDPOINT_COMP) { + epcd = itr; + break; + } + if (hdr->bLength > itr_size) { + dev_err(dev, "HW Bug? ep 0x%02x: extra descriptor " + "at offset %zu (type 0x%02x) " + "length %d but only %zu bytes left\n", + ep->desc.bEndpointAddress, + itr - (void *) ep->extra, hdr->bDescriptorType, + hdr->bLength, itr_size); + break; + } + itr += hdr->bLength; + itr_size -= hdr->bDescriptorType; + } +out: + d_fnend(3, dev, "(ep %p) = %p\n", ep, epcd); + return epcd; +} + +/* + * Aim an rpipe to its device & endpoint destination + * + * Make sure we change the address to unauthenticathed if the device + * is WUSB and it is not authenticated. + */ +static int rpipe_aim(struct wa_rpipe *rpipe, struct wahc *wa, + struct usb_host_endpoint *ep, struct urb *urb, gfp_t gfp) +{ + int result = -ENOMSG; /* better code for lack of companion? */ + struct device *dev = &wa->usb_iface->dev; + struct usb_device *usb_dev = urb->dev; + struct usb_wireless_ep_comp_descriptor *epcd; + u8 unauth; + + d_fnstart(3, dev, "(rpipe %p wa %p ep %p, urb %p)\n", + rpipe, wa, ep, urb); + epcd = rpipe_epc_find(dev, ep); + if (epcd == NULL) { + dev_err(dev, "ep 0x%02x: can't find companion descriptor\n", + ep->desc.bEndpointAddress); + goto error; + } + unauth = usb_dev->wusb && !usb_dev->authenticated ? 0x80 : 0; + __rpipe_reset(wa, le16_to_cpu(rpipe->descr.wRPipeIndex)); + atomic_set(&rpipe->segs_available, le16_to_cpu(rpipe->descr.wRequests)); + /* FIXME: block allocation system; request with queuing and timeout */ + /* FIXME: compute so seg_size > ep->maxpktsize */ + rpipe->descr.wBlocks = cpu_to_le16(16); /* given */ + /* ep0 maxpktsize is 0x200 (WUSB1.0[4.8.1]) */ + rpipe->descr.wMaxPacketSize = cpu_to_le16(ep->desc.wMaxPacketSize); + rpipe->descr.bHSHubAddress = 0; /* reserved: zero */ + rpipe->descr.bHSHubPort = wusb_port_no_to_idx(urb->dev->portnum); + /* FIXME: use maximum speed as supported or recommended by device */ + rpipe->descr.bSpeed = usb_pipeendpoint(urb->pipe) == 0 ? + UWB_PHY_RATE_53 : UWB_PHY_RATE_200; + d_printf(2, dev, "addr %u (0x%02x) rpipe #%u ep# %u speed %d\n", + urb->dev->devnum, urb->dev->devnum | unauth, + le16_to_cpu(rpipe->descr.wRPipeIndex), + usb_pipeendpoint(urb->pipe), rpipe->descr.bSpeed); + /* see security.c:wusb_update_address() */ + if (unlikely(urb->dev->devnum == 0x80)) + rpipe->descr.bDeviceAddress = 0; + else + rpipe->descr.bDeviceAddress = urb->dev->devnum | unauth; + rpipe->descr.bEndpointAddress = ep->desc.bEndpointAddress; + /* FIXME: bDataSequence */ + rpipe->descr.bDataSequence = 0; + /* FIXME: dwCurrentWindow */ + rpipe->descr.dwCurrentWindow = cpu_to_le32(1); + /* FIXME: bMaxDataSequence */ + rpipe->descr.bMaxDataSequence = epcd->bMaxSequence - 1; + rpipe->descr.bInterval = ep->desc.bInterval; + /* FIXME: bOverTheAirInterval */ + rpipe->descr.bOverTheAirInterval = 0; /* 0 if not isoc */ + /* FIXME: xmit power & preamble blah blah */ + rpipe->descr.bmAttribute = ep->desc.bmAttributes & 0x03; + /* rpipe->descr.bmCharacteristics RO */ + /* FIXME: bmRetryOptions */ + rpipe->descr.bmRetryOptions = 15; + /* FIXME: use for assessing link quality? */ + rpipe->descr.wNumTransactionErrors = 0; + result = __rpipe_set_descr(wa, &rpipe->descr, + le16_to_cpu(rpipe->descr.wRPipeIndex)); + if (result < 0) { + dev_err(dev, "Cannot aim rpipe: %d\n", result); + goto error; + } + result = 0; +error: + d_fnend(3, dev, "(rpipe %p wa %p ep %p urb %p) = %d\n", + rpipe, wa, ep, urb, result); + return result; +} + +/* + * Check an aimed rpipe to make sure it points to where we want + * + * We use bit 19 of the Linux USB pipe bitmap for unauth vs auth + * space; when it is like that, we or 0x80 to make an unauth address. + */ +static int rpipe_check_aim(const struct wa_rpipe *rpipe, const struct wahc *wa, + const struct usb_host_endpoint *ep, + const struct urb *urb, gfp_t gfp) +{ + int result = 0; /* better code for lack of companion? */ + struct device *dev = &wa->usb_iface->dev; + struct usb_device *usb_dev = urb->dev; + u8 unauth = (usb_dev->wusb && !usb_dev->authenticated) ? 0x80 : 0; + u8 portnum = wusb_port_no_to_idx(urb->dev->portnum); + + d_fnstart(3, dev, "(rpipe %p wa %p ep %p, urb %p)\n", + rpipe, wa, ep, urb); +#define AIM_CHECK(rdf, val, text) \ + do { \ + if (rpipe->descr.rdf != (val)) { \ + dev_err(dev, \ + "rpipe aim discrepancy: " #rdf " " text "\n", \ + rpipe->descr.rdf, (val)); \ + result = -EINVAL; \ + WARN_ON(1); \ + } \ + } while (0) + AIM_CHECK(wMaxPacketSize, cpu_to_le16(ep->desc.wMaxPacketSize), + "(%u vs %u)"); + AIM_CHECK(bHSHubPort, portnum, "(%u vs %u)"); + AIM_CHECK(bSpeed, usb_pipeendpoint(urb->pipe) == 0 ? + UWB_PHY_RATE_53 : UWB_PHY_RATE_200, + "(%u vs %u)"); + AIM_CHECK(bDeviceAddress, urb->dev->devnum | unauth, "(%u vs %u)"); + AIM_CHECK(bEndpointAddress, ep->desc.bEndpointAddress, "(%u vs %u)"); + AIM_CHECK(bInterval, ep->desc.bInterval, "(%u vs %u)"); + AIM_CHECK(bmAttribute, ep->desc.bmAttributes & 0x03, "(%u vs %u)"); +#undef AIM_CHECK + return result; +} + +#ifndef CONFIG_BUG +#define CONFIG_BUG 0 +#endif + +/* + * Make sure there is an rpipe allocated for an endpoint + * + * If already allocated, we just refcount it; if not, we get an + * idle one, aim it to the right location and take it. + * + * Attaches to ep->hcpriv and rpipe->ep to ep. + */ +int rpipe_get_by_ep(struct wahc *wa, struct usb_host_endpoint *ep, + struct urb *urb, gfp_t gfp) +{ + int result = 0; + struct device *dev = &wa->usb_iface->dev; + struct wa_rpipe *rpipe; + u8 eptype; + + d_fnstart(3, dev, "(wa %p ep %p urb %p gfp 0x%08x)\n", wa, ep, urb, + gfp); + mutex_lock(&wa->rpipe_mutex); + rpipe = ep->hcpriv; + if (rpipe != NULL) { + if (CONFIG_BUG == 1) { + result = rpipe_check_aim(rpipe, wa, ep, urb, gfp); + if (result < 0) + goto error; + } + __rpipe_get(rpipe); + d_printf(2, dev, "ep 0x%02x: reusing rpipe %u\n", + ep->desc.bEndpointAddress, + le16_to_cpu(rpipe->descr.wRPipeIndex)); + } else { + /* hmm, assign idle rpipe, aim it */ + result = -ENOBUFS; + eptype = ep->desc.bmAttributes & 0x03; + result = rpipe_get_idle(&rpipe, wa, 1 << eptype, gfp); + if (result < 0) + goto error; + result = rpipe_aim(rpipe, wa, ep, urb, gfp); + if (result < 0) { + rpipe_put(rpipe); + goto error; + } + ep->hcpriv = rpipe; + rpipe->ep = ep; + __rpipe_get(rpipe); /* for caching into ep->hcpriv */ + d_printf(2, dev, "ep 0x%02x: using rpipe %u\n", + ep->desc.bEndpointAddress, + le16_to_cpu(rpipe->descr.wRPipeIndex)); + } + d_dump(4, dev, &rpipe->descr, sizeof(rpipe->descr)); +error: + mutex_unlock(&wa->rpipe_mutex); + d_fnend(3, dev, "(wa %p ep %p urb %p gfp 0x%08x)\n", wa, ep, urb, gfp); + return result; +} + +/* + * Allocate the bitmap for each rpipe. + */ +int wa_rpipes_create(struct wahc *wa) +{ + wa->rpipes = wa->wa_descr->wNumRPipes; + wa->rpipe_bm = kzalloc(BITS_TO_LONGS(wa->rpipes)*sizeof(unsigned long), + GFP_KERNEL); + if (wa->rpipe_bm == NULL) + return -ENOMEM; + return 0; +} + +void wa_rpipes_destroy(struct wahc *wa) +{ + struct device *dev = &wa->usb_iface->dev; + d_fnstart(3, dev, "(wa %p)\n", wa); + if (!bitmap_empty(wa->rpipe_bm, wa->rpipes)) { + char buf[256]; + WARN_ON(1); + bitmap_scnprintf(buf, sizeof(buf), wa->rpipe_bm, wa->rpipes); + dev_err(dev, "BUG: pipes not released on exit: %s\n", buf); + } + kfree(wa->rpipe_bm); + d_fnend(3, dev, "(wa %p)\n", wa); +} + +/* + * Release resources allocated for an endpoint + * + * If there is an associated rpipe to this endpoint, Abort any pending + * transfers and put it. If the rpipe ends up being destroyed, + * __rpipe_destroy() will cleanup ep->hcpriv. + * + * This is called before calling hcd->stop(), so you don't need to do + * anything else in there. + */ +void rpipe_ep_disable(struct wahc *wa, struct usb_host_endpoint *ep) +{ + struct device *dev = &wa->usb_iface->dev; + struct wa_rpipe *rpipe; + d_fnstart(2, dev, "(wa %p ep %p)\n", wa, ep); + mutex_lock(&wa->rpipe_mutex); + rpipe = ep->hcpriv; + if (rpipe != NULL) { + unsigned rc = atomic_read(&rpipe->refcnt.refcount); + int result; + u16 index = le16_to_cpu(rpipe->descr.wRPipeIndex); + + if (rc != 1) + d_printf(1, dev, "(wa %p ep %p) rpipe %p refcnt %u\n", + wa, ep, rpipe, rc); + + d_printf(1, dev, "rpipe %u: abort\n", index); + result = usb_control_msg( + wa->usb_dev, usb_rcvctrlpipe(wa->usb_dev, 0), + USB_REQ_RPIPE_ABORT, + USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_RPIPE, + 0, index, NULL, 0, 1000 /* FIXME: arbitrary */); + if (result < 0 && result != -ENODEV /* dev is gone */) + d_printf(1, dev, "(wa %p rpipe %u): abort failed: %d\n", + wa, index, result); + rpipe_put(rpipe); + } + mutex_unlock(&wa->rpipe_mutex); + d_fnend(2, dev, "(wa %p ep %p)\n", wa, ep); + return; +} +EXPORT_SYMBOL_GPL(rpipe_ep_disable); diff --git a/drivers/usb/wusbcore/wa-xfer.c b/drivers/usb/wusbcore/wa-xfer.c new file mode 100644 index 000000000000..c038635d1c64 --- /dev/null +++ b/drivers/usb/wusbcore/wa-xfer.c @@ -0,0 +1,1709 @@ +/* + * WUSB Wire Adapter + * Data transfer and URB enqueing + * + * Copyright (C) 2005-2006 Intel Corporation + * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + * + * + * How transfers work: get a buffer, break it up in segments (segment + * size is a multiple of the maxpacket size). For each segment issue a + * segment request (struct wa_xfer_*), then send the data buffer if + * out or nothing if in (all over the DTO endpoint). + * + * For each submitted segment request, a notification will come over + * the NEP endpoint and a transfer result (struct xfer_result) will + * arrive in the DTI URB. Read it, get the xfer ID, see if there is + * data coming (inbound transfer), schedule a read and handle it. + * + * Sounds simple, it is a pain to implement. + * + * + * ENTRY POINTS + * + * FIXME + * + * LIFE CYCLE / STATE DIAGRAM + * + * FIXME + * + * THIS CODE IS DISGUSTING + * + * Warned you are; it's my second try and still not happy with it. + * + * NOTES: + * + * - No iso + * + * - Supports DMA xfers, control, bulk and maybe interrupt + * + * - Does not recycle unused rpipes + * + * An rpipe is assigned to an endpoint the first time it is used, + * and then it's there, assigned, until the endpoint is disabled + * (destroyed [{h,d}wahc_op_ep_disable()]. The assignment of the + * rpipe to the endpoint is done under the wa->rpipe_sem semaphore + * (should be a mutex). + * + * Two methods it could be done: + * + * (a) set up a timer everytime an rpipe's use count drops to 1 + * (which means unused) or when a transfer ends. Reset the + * timer when a xfer is queued. If the timer expires, release + * the rpipe [see rpipe_ep_disable()]. + * + * (b) when looking for free rpipes to attach [rpipe_get_by_ep()], + * when none are found go over the list, check their endpoint + * and their activity record (if no last-xfer-done-ts in the + * last x seconds) take it + * + * However, due to the fact that we have a set of limited + * resources (max-segments-at-the-same-time per xfer, + * xfers-per-ripe, blocks-per-rpipe, rpipes-per-host), at the end + * we are going to have to rebuild all this based on an scheduler, + * to where we have a list of transactions to do and based on the + * availability of the different requried components (blocks, + * rpipes, segment slots, etc), we go scheduling them. Painful. + */ +#include <linux/init.h> +#include <linux/spinlock.h> +#include <linux/hash.h> +#include "wa-hc.h" +#include "wusbhc.h" + +#undef D_LOCAL +#define D_LOCAL 0 /* 0 disabled, > 0 different levels... */ +#include <linux/uwb/debug.h> + +enum { + WA_SEGS_MAX = 255, +}; + +enum wa_seg_status { + WA_SEG_NOTREADY, + WA_SEG_READY, + WA_SEG_DELAYED, + WA_SEG_SUBMITTED, + WA_SEG_PENDING, + WA_SEG_DTI_PENDING, + WA_SEG_DONE, + WA_SEG_ERROR, + WA_SEG_ABORTED, +}; + +static void wa_xfer_delayed_run(struct wa_rpipe *); + +/* + * Life cycle governed by 'struct urb' (the refcount of the struct is + * that of the 'struct urb' and usb_free_urb() would free the whole + * struct). + */ +struct wa_seg { + struct urb urb; + struct urb *dto_urb; /* for data output? */ + struct list_head list_node; /* for rpipe->req_list */ + struct wa_xfer *xfer; /* out xfer */ + u8 index; /* which segment we are */ + enum wa_seg_status status; + ssize_t result; /* bytes xfered or error */ + struct wa_xfer_hdr xfer_hdr; + u8 xfer_extra[]; /* xtra space for xfer_hdr_ctl */ +}; + +static void wa_seg_init(struct wa_seg *seg) +{ + /* usb_init_urb() repeats a lot of work, so we do it here */ + kref_init(&seg->urb.kref); +} + +/* + * Protected by xfer->lock + * + */ +struct wa_xfer { + struct kref refcnt; + struct list_head list_node; + spinlock_t lock; + u32 id; + + struct wahc *wa; /* Wire adapter we are plugged to */ + struct usb_host_endpoint *ep; + struct urb *urb; /* URB we are transfering for */ + struct wa_seg **seg; /* transfer segments */ + u8 segs, segs_submitted, segs_done; + unsigned is_inbound:1; + unsigned is_dma:1; + size_t seg_size; + int result; + + gfp_t gfp; /* allocation mask */ + + struct wusb_dev *wusb_dev; /* for activity timestamps */ +}; + +static inline void wa_xfer_init(struct wa_xfer *xfer) +{ + kref_init(&xfer->refcnt); + INIT_LIST_HEAD(&xfer->list_node); + spin_lock_init(&xfer->lock); +} + +/* + * Destory a transfer structure + * + * Note that the xfer->seg[index] thingies follow the URB life cycle, + * so we need to put them, not free them. + */ +static void wa_xfer_destroy(struct kref *_xfer) +{ + struct wa_xfer *xfer = container_of(_xfer, struct wa_xfer, refcnt); + if (xfer->seg) { + unsigned cnt; + for (cnt = 0; cnt < xfer->segs; cnt++) { + if (xfer->is_inbound) + usb_put_urb(xfer->seg[cnt]->dto_urb); + usb_put_urb(&xfer->seg[cnt]->urb); + } + } + kfree(xfer); + d_printf(2, NULL, "xfer %p destroyed\n", xfer); +} + +static void wa_xfer_get(struct wa_xfer *xfer) +{ + kref_get(&xfer->refcnt); +} + +static void wa_xfer_put(struct wa_xfer *xfer) +{ + d_fnstart(3, NULL, "(xfer %p) -- ref count bef put %d\n", + xfer, atomic_read(&xfer->refcnt.refcount)); + kref_put(&xfer->refcnt, wa_xfer_destroy); + d_fnend(3, NULL, "(xfer %p) = void\n", xfer); +} + +/* + * xfer is referenced + * + * xfer->lock has to be unlocked + * + * We take xfer->lock for setting the result; this is a barrier + * against drivers/usb/core/hcd.c:unlink1() being called after we call + * usb_hcd_giveback_urb() and wa_urb_dequeue() trying to get a + * reference to the transfer. + */ +static void wa_xfer_giveback(struct wa_xfer *xfer) +{ + unsigned long flags; + d_fnstart(3, NULL, "(xfer %p)\n", xfer); + spin_lock_irqsave(&xfer->wa->xfer_list_lock, flags); + list_del_init(&xfer->list_node); + spin_unlock_irqrestore(&xfer->wa->xfer_list_lock, flags); + /* FIXME: segmentation broken -- kills DWA */ + wusbhc_giveback_urb(xfer->wa->wusb, xfer->urb, xfer->result); + wa_put(xfer->wa); + wa_xfer_put(xfer); + d_fnend(3, NULL, "(xfer %p) = void\n", xfer); +} + +/* + * xfer is referenced + * + * xfer->lock has to be unlocked + */ +static void wa_xfer_completion(struct wa_xfer *xfer) +{ + d_fnstart(3, NULL, "(xfer %p)\n", xfer); + if (xfer->wusb_dev) + wusb_dev_put(xfer->wusb_dev); + rpipe_put(xfer->ep->hcpriv); + wa_xfer_giveback(xfer); + d_fnend(3, NULL, "(xfer %p) = void\n", xfer); + return; +} + +/* + * If transfer is done, wrap it up and return true + * + * xfer->lock has to be locked + */ +static unsigned __wa_xfer_is_done(struct wa_xfer *xfer) +{ + unsigned result, cnt; + struct wa_seg *seg; + struct urb *urb = xfer->urb; + unsigned found_short = 0; + + d_fnstart(3, NULL, "(xfer %p)\n", xfer); + result = xfer->segs_done == xfer->segs_submitted; + if (result == 0) + goto out; + urb->actual_length = 0; + for (cnt = 0; cnt < xfer->segs; cnt++) { + seg = xfer->seg[cnt]; + switch (seg->status) { + case WA_SEG_DONE: + if (found_short && seg->result > 0) { + if (printk_ratelimit()) + printk(KERN_ERR "xfer %p#%u: bad short " + "segments (%zu)\n", xfer, cnt, + seg->result); + urb->status = -EINVAL; + goto out; + } + urb->actual_length += seg->result; + if (seg->result < xfer->seg_size + && cnt != xfer->segs-1) + found_short = 1; + d_printf(2, NULL, "xfer %p#%u: DONE short %d " + "result %zu urb->actual_length %d\n", + xfer, seg->index, found_short, seg->result, + urb->actual_length); + break; + case WA_SEG_ERROR: + xfer->result = seg->result; + d_printf(2, NULL, "xfer %p#%u: ERROR result %zu\n", + xfer, seg->index, seg->result); + goto out; + case WA_SEG_ABORTED: + WARN_ON(urb->status != -ECONNRESET + && urb->status != -ENOENT); + d_printf(2, NULL, "xfer %p#%u ABORTED: result %d\n", + xfer, seg->index, urb->status); + xfer->result = urb->status; + goto out; + default: + /* if (printk_ratelimit()) */ + printk(KERN_ERR "xfer %p#%u: " + "is_done bad state %d\n", + xfer, cnt, seg->status); + xfer->result = -EINVAL; + WARN_ON(1); + goto out; + } + } + xfer->result = 0; +out: + d_fnend(3, NULL, "(xfer %p) = void\n", xfer); + return result; +} + +/* + * Initialize a transfer's ID + * + * We need to use a sequential number; if we use the pointer or the + * hash of the pointer, it can repeat over sequential transfers and + * then it will confuse the HWA....wonder why in hell they put a 32 + * bit handle in there then. + */ +static void wa_xfer_id_init(struct wa_xfer *xfer) +{ + xfer->id = atomic_add_return(1, &xfer->wa->xfer_id_count); +} + +/* + * Return the xfer's ID associated with xfer + * + * Need to generate a + */ +static u32 wa_xfer_id(struct wa_xfer *xfer) +{ + return xfer->id; +} + +/* + * Search for a transfer list ID on the HCD's URB list + * + * For 32 bit architectures, we use the pointer itself; for 64 bits, a + * 32-bit hash of the pointer. + * + * @returns NULL if not found. + */ +static struct wa_xfer *wa_xfer_get_by_id(struct wahc *wa, u32 id) +{ + unsigned long flags; + struct wa_xfer *xfer_itr; + spin_lock_irqsave(&wa->xfer_list_lock, flags); + list_for_each_entry(xfer_itr, &wa->xfer_list, list_node) { + if (id == xfer_itr->id) { + wa_xfer_get(xfer_itr); + goto out; + } + } + xfer_itr = NULL; +out: + spin_unlock_irqrestore(&wa->xfer_list_lock, flags); + return xfer_itr; +} + +struct wa_xfer_abort_buffer { + struct urb urb; + struct wa_xfer_abort cmd; +}; + +static void __wa_xfer_abort_cb(struct urb *urb) +{ + struct wa_xfer_abort_buffer *b = urb->context; + usb_put_urb(&b->urb); +} + +/* + * Aborts an ongoing transaction + * + * Assumes the transfer is referenced and locked and in a submitted + * state (mainly that there is an endpoint/rpipe assigned). + * + * The callback (see above) does nothing but freeing up the data by + * putting the URB. Because the URB is allocated at the head of the + * struct, the whole space we allocated is kfreed. + * + * We'll get an 'aborted transaction' xfer result on DTI, that'll + * politely ignore because at this point the transaction has been + * marked as aborted already. + */ +static void __wa_xfer_abort(struct wa_xfer *xfer) +{ + int result; + struct device *dev = &xfer->wa->usb_iface->dev; + struct wa_xfer_abort_buffer *b; + struct wa_rpipe *rpipe = xfer->ep->hcpriv; + + b = kmalloc(sizeof(*b), GFP_ATOMIC); + if (b == NULL) + goto error_kmalloc; + b->cmd.bLength = sizeof(b->cmd); + b->cmd.bRequestType = WA_XFER_ABORT; + b->cmd.wRPipe = rpipe->descr.wRPipeIndex; + b->cmd.dwTransferID = wa_xfer_id(xfer); + + usb_init_urb(&b->urb); + usb_fill_bulk_urb(&b->urb, xfer->wa->usb_dev, + usb_sndbulkpipe(xfer->wa->usb_dev, + xfer->wa->dto_epd->bEndpointAddress), + &b->cmd, sizeof(b->cmd), __wa_xfer_abort_cb, b); + result = usb_submit_urb(&b->urb, GFP_ATOMIC); + if (result < 0) + goto error_submit; + return; /* callback frees! */ + + +error_submit: + if (printk_ratelimit()) + dev_err(dev, "xfer %p: Can't submit abort request: %d\n", + xfer, result); + kfree(b); +error_kmalloc: + return; + +} + +/* + * + * @returns < 0 on error, transfer segment request size if ok + */ +static ssize_t __wa_xfer_setup_sizes(struct wa_xfer *xfer, + enum wa_xfer_type *pxfer_type) +{ + ssize_t result; + struct device *dev = &xfer->wa->usb_iface->dev; + size_t maxpktsize; + struct urb *urb = xfer->urb; + struct wa_rpipe *rpipe = xfer->ep->hcpriv; + + d_fnstart(3, dev, "(xfer %p [rpipe %p] urb %p)\n", + xfer, rpipe, urb); + switch (rpipe->descr.bmAttribute & 0x3) { + case USB_ENDPOINT_XFER_CONTROL: + *pxfer_type = WA_XFER_TYPE_CTL; + result = sizeof(struct wa_xfer_ctl); + break; + case USB_ENDPOINT_XFER_INT: + case USB_ENDPOINT_XFER_BULK: + *pxfer_type = WA_XFER_TYPE_BI; + result = sizeof(struct wa_xfer_bi); + break; + case USB_ENDPOINT_XFER_ISOC: + dev_err(dev, "FIXME: ISOC not implemented\n"); + result = -ENOSYS; + goto error; + default: + /* never happens */ + BUG(); + result = -EINVAL; /* shut gcc up */ + }; + xfer->is_inbound = urb->pipe & USB_DIR_IN ? 1 : 0; + xfer->is_dma = urb->transfer_flags & URB_NO_TRANSFER_DMA_MAP ? 1 : 0; + xfer->seg_size = le16_to_cpu(rpipe->descr.wBlocks) + * 1 << (xfer->wa->wa_descr->bRPipeBlockSize - 1); + /* Compute the segment size and make sure it is a multiple of + * the maxpktsize (WUSB1.0[8.3.3.1])...not really too much of + * a check (FIXME) */ + maxpktsize = le16_to_cpu(rpipe->descr.wMaxPacketSize); + if (xfer->seg_size < maxpktsize) { + dev_err(dev, "HW BUG? seg_size %zu smaller than maxpktsize " + "%zu\n", xfer->seg_size, maxpktsize); + result = -EINVAL; + goto error; + } + xfer->seg_size = (xfer->seg_size / maxpktsize) * maxpktsize; + xfer->segs = (urb->transfer_buffer_length + xfer->seg_size - 1) + / xfer->seg_size; + if (xfer->segs >= WA_SEGS_MAX) { + dev_err(dev, "BUG? ops, number of segments %d bigger than %d\n", + (int)(urb->transfer_buffer_length / xfer->seg_size), + WA_SEGS_MAX); + result = -EINVAL; + goto error; + } + if (xfer->segs == 0 && *pxfer_type == WA_XFER_TYPE_CTL) + xfer->segs = 1; +error: + d_fnend(3, dev, "(xfer %p [rpipe %p] urb %p) = %d\n", + xfer, rpipe, urb, (int)result); + return result; +} + +/** Fill in the common request header and xfer-type specific data. */ +static void __wa_xfer_setup_hdr0(struct wa_xfer *xfer, + struct wa_xfer_hdr *xfer_hdr0, + enum wa_xfer_type xfer_type, + size_t xfer_hdr_size) +{ + struct wa_rpipe *rpipe = xfer->ep->hcpriv; + + xfer_hdr0 = &xfer->seg[0]->xfer_hdr; + xfer_hdr0->bLength = xfer_hdr_size; + xfer_hdr0->bRequestType = xfer_type; + xfer_hdr0->wRPipe = rpipe->descr.wRPipeIndex; + xfer_hdr0->dwTransferID = wa_xfer_id(xfer); + xfer_hdr0->bTransferSegment = 0; + switch (xfer_type) { + case WA_XFER_TYPE_CTL: { + struct wa_xfer_ctl *xfer_ctl = + container_of(xfer_hdr0, struct wa_xfer_ctl, hdr); + xfer_ctl->bmAttribute = xfer->is_inbound ? 1 : 0; + BUG_ON(xfer->urb->transfer_flags & URB_NO_SETUP_DMA_MAP + && xfer->urb->setup_packet == NULL); + memcpy(&xfer_ctl->baSetupData, xfer->urb->setup_packet, + sizeof(xfer_ctl->baSetupData)); + break; + } + case WA_XFER_TYPE_BI: + break; + case WA_XFER_TYPE_ISO: + printk(KERN_ERR "FIXME: ISOC not implemented\n"); + default: + BUG(); + }; +} + +/* + * Callback for the OUT data phase of the segment request + * + * Check wa_seg_cb(); most comments also apply here because this + * function does almost the same thing and they work closely + * together. + * + * If the seg request has failed but this DTO phase has suceeded, + * wa_seg_cb() has already failed the segment and moved the + * status to WA_SEG_ERROR, so this will go through 'case 0' and + * effectively do nothing. + */ +static void wa_seg_dto_cb(struct urb *urb) +{ + struct wa_seg *seg = urb->context; + struct wa_xfer *xfer = seg->xfer; + struct wahc *wa; + struct device *dev; + struct wa_rpipe *rpipe; + unsigned long flags; + unsigned rpipe_ready = 0; + u8 done = 0; + + d_fnstart(3, NULL, "(urb %p [%d])\n", urb, urb->status); + switch (urb->status) { + case 0: + spin_lock_irqsave(&xfer->lock, flags); + wa = xfer->wa; + dev = &wa->usb_iface->dev; + d_printf(2, dev, "xfer %p#%u: data out done (%d bytes)\n", + xfer, seg->index, urb->actual_length); + if (seg->status < WA_SEG_PENDING) + seg->status = WA_SEG_PENDING; + seg->result = urb->actual_length; + spin_unlock_irqrestore(&xfer->lock, flags); + break; + case -ECONNRESET: /* URB unlinked; no need to do anything */ + case -ENOENT: /* as it was done by the who unlinked us */ + break; + default: /* Other errors ... */ + spin_lock_irqsave(&xfer->lock, flags); + wa = xfer->wa; + dev = &wa->usb_iface->dev; + rpipe = xfer->ep->hcpriv; + if (printk_ratelimit()) + dev_err(dev, "xfer %p#%u: data out error %d\n", + xfer, seg->index, urb->status); + if (edc_inc(&wa->nep_edc, EDC_MAX_ERRORS, + EDC_ERROR_TIMEFRAME)){ + dev_err(dev, "DTO: URB max acceptable errors " + "exceeded, resetting device\n"); + wa_reset_all(wa); + } + if (seg->status != WA_SEG_ERROR) { + seg->status = WA_SEG_ERROR; + seg->result = urb->status; + xfer->segs_done++; + __wa_xfer_abort(xfer); + rpipe_ready = rpipe_avail_inc(rpipe); + done = __wa_xfer_is_done(xfer); + } + spin_unlock_irqrestore(&xfer->lock, flags); + if (done) + wa_xfer_completion(xfer); + if (rpipe_ready) + wa_xfer_delayed_run(rpipe); + } + d_fnend(3, NULL, "(urb %p [%d]) = void\n", urb, urb->status); +} + +/* + * Callback for the segment request + * + * If succesful transition state (unless already transitioned or + * outbound transfer); otherwise, take a note of the error, mark this + * segment done and try completion. + * + * Note we don't access until we are sure that the transfer hasn't + * been cancelled (ECONNRESET, ENOENT), which could mean that + * seg->xfer could be already gone. + * + * We have to check before setting the status to WA_SEG_PENDING + * because sometimes the xfer result callback arrives before this + * callback (geeeeeeze), so it might happen that we are already in + * another state. As well, we don't set it if the transfer is inbound, + * as in that case, wa_seg_dto_cb will do it when the OUT data phase + * finishes. + */ +static void wa_seg_cb(struct urb *urb) +{ + struct wa_seg *seg = urb->context; + struct wa_xfer *xfer = seg->xfer; + struct wahc *wa; + struct device *dev; + struct wa_rpipe *rpipe; + unsigned long flags; + unsigned rpipe_ready; + u8 done = 0; + + d_fnstart(3, NULL, "(urb %p [%d])\n", urb, urb->status); + switch (urb->status) { + case 0: + spin_lock_irqsave(&xfer->lock, flags); + wa = xfer->wa; + dev = &wa->usb_iface->dev; + d_printf(2, dev, "xfer %p#%u: request done\n", + xfer, seg->index); + if (xfer->is_inbound && seg->status < WA_SEG_PENDING) + seg->status = WA_SEG_PENDING; + spin_unlock_irqrestore(&xfer->lock, flags); + break; + case -ECONNRESET: /* URB unlinked; no need to do anything */ + case -ENOENT: /* as it was done by the who unlinked us */ + break; + default: /* Other errors ... */ + spin_lock_irqsave(&xfer->lock, flags); + wa = xfer->wa; + dev = &wa->usb_iface->dev; + rpipe = xfer->ep->hcpriv; + if (printk_ratelimit()) + dev_err(dev, "xfer %p#%u: request error %d\n", + xfer, seg->index, urb->status); + if (edc_inc(&wa->nep_edc, EDC_MAX_ERRORS, + EDC_ERROR_TIMEFRAME)){ + dev_err(dev, "DTO: URB max acceptable errors " + "exceeded, resetting device\n"); + wa_reset_all(wa); + } + usb_unlink_urb(seg->dto_urb); + seg->status = WA_SEG_ERROR; + seg->result = urb->status; + xfer->segs_done++; + __wa_xfer_abort(xfer); + rpipe_ready = rpipe_avail_inc(rpipe); + done = __wa_xfer_is_done(xfer); + spin_unlock_irqrestore(&xfer->lock, flags); + if (done) + wa_xfer_completion(xfer); + if (rpipe_ready) + wa_xfer_delayed_run(rpipe); + } + d_fnend(3, NULL, "(urb %p [%d]) = void\n", urb, urb->status); +} + +/* + * Allocate the segs array and initialize each of them + * + * The segments are freed by wa_xfer_destroy() when the xfer use count + * drops to zero; however, because each segment is given the same life + * cycle as the USB URB it contains, it is actually freed by + * usb_put_urb() on the contained USB URB (twisted, eh?). + */ +static int __wa_xfer_setup_segs(struct wa_xfer *xfer, size_t xfer_hdr_size) +{ + int result, cnt; + size_t alloc_size = sizeof(*xfer->seg[0]) + - sizeof(xfer->seg[0]->xfer_hdr) + xfer_hdr_size; + struct usb_device *usb_dev = xfer->wa->usb_dev; + const struct usb_endpoint_descriptor *dto_epd = xfer->wa->dto_epd; + struct wa_seg *seg; + size_t buf_itr, buf_size, buf_itr_size; + + result = -ENOMEM; + xfer->seg = kcalloc(xfer->segs, sizeof(xfer->seg[0]), GFP_ATOMIC); + if (xfer->seg == NULL) + goto error_segs_kzalloc; + buf_itr = 0; + buf_size = xfer->urb->transfer_buffer_length; + for (cnt = 0; cnt < xfer->segs; cnt++) { + seg = xfer->seg[cnt] = kzalloc(alloc_size, GFP_ATOMIC); + if (seg == NULL) + goto error_seg_kzalloc; + wa_seg_init(seg); + seg->xfer = xfer; + seg->index = cnt; + usb_fill_bulk_urb(&seg->urb, usb_dev, + usb_sndbulkpipe(usb_dev, + dto_epd->bEndpointAddress), + &seg->xfer_hdr, xfer_hdr_size, + wa_seg_cb, seg); + buf_itr_size = buf_size > xfer->seg_size ? + xfer->seg_size : buf_size; + if (xfer->is_inbound == 0 && buf_size > 0) { + seg->dto_urb = usb_alloc_urb(0, GFP_ATOMIC); + if (seg->dto_urb == NULL) + goto error_dto_alloc; + usb_fill_bulk_urb( + seg->dto_urb, usb_dev, + usb_sndbulkpipe(usb_dev, + dto_epd->bEndpointAddress), + NULL, 0, wa_seg_dto_cb, seg); + if (xfer->is_dma) { + seg->dto_urb->transfer_dma = + xfer->urb->transfer_dma + buf_itr; + seg->dto_urb->transfer_flags |= + URB_NO_TRANSFER_DMA_MAP; + } else + seg->dto_urb->transfer_buffer = + xfer->urb->transfer_buffer + buf_itr; + seg->dto_urb->transfer_buffer_length = buf_itr_size; + } + seg->status = WA_SEG_READY; + buf_itr += buf_itr_size; + buf_size -= buf_itr_size; + } + return 0; + +error_dto_alloc: + kfree(xfer->seg[cnt]); + cnt--; +error_seg_kzalloc: + /* use the fact that cnt is left at were it failed */ + for (; cnt > 0; cnt--) { + if (xfer->is_inbound == 0) + kfree(xfer->seg[cnt]->dto_urb); + kfree(xfer->seg[cnt]); + } +error_segs_kzalloc: + return result; +} + +/* + * Allocates all the stuff needed to submit a transfer + * + * Breaks the whole data buffer in a list of segments, each one has a + * structure allocated to it and linked in xfer->seg[index] + * + * FIXME: merge setup_segs() and the last part of this function, no + * need to do two for loops when we could run everything in a + * single one + */ +static int __wa_xfer_setup(struct wa_xfer *xfer, struct urb *urb) +{ + int result; + struct device *dev = &xfer->wa->usb_iface->dev; + enum wa_xfer_type xfer_type = 0; /* shut up GCC */ + size_t xfer_hdr_size, cnt, transfer_size; + struct wa_xfer_hdr *xfer_hdr0, *xfer_hdr; + + d_fnstart(3, dev, "(xfer %p [rpipe %p] urb %p)\n", + xfer, xfer->ep->hcpriv, urb); + + result = __wa_xfer_setup_sizes(xfer, &xfer_type); + if (result < 0) + goto error_setup_sizes; + xfer_hdr_size = result; + result = __wa_xfer_setup_segs(xfer, xfer_hdr_size); + if (result < 0) { + dev_err(dev, "xfer %p: Failed to allocate %d segments: %d\n", + xfer, xfer->segs, result); + goto error_setup_segs; + } + /* Fill the first header */ + xfer_hdr0 = &xfer->seg[0]->xfer_hdr; + wa_xfer_id_init(xfer); + __wa_xfer_setup_hdr0(xfer, xfer_hdr0, xfer_type, xfer_hdr_size); + + /* Fill remainig headers */ + xfer_hdr = xfer_hdr0; + transfer_size = urb->transfer_buffer_length; + xfer_hdr0->dwTransferLength = transfer_size > xfer->seg_size ? + xfer->seg_size : transfer_size; + transfer_size -= xfer->seg_size; + for (cnt = 1; cnt < xfer->segs; cnt++) { + xfer_hdr = &xfer->seg[cnt]->xfer_hdr; + memcpy(xfer_hdr, xfer_hdr0, xfer_hdr_size); + xfer_hdr->bTransferSegment = cnt; + xfer_hdr->dwTransferLength = transfer_size > xfer->seg_size ? + cpu_to_le32(xfer->seg_size) + : cpu_to_le32(transfer_size); + xfer->seg[cnt]->status = WA_SEG_READY; + transfer_size -= xfer->seg_size; + } + xfer_hdr->bTransferSegment |= 0x80; /* this is the last segment */ + result = 0; +error_setup_segs: +error_setup_sizes: + d_fnend(3, dev, "(xfer %p [rpipe %p] urb %p) = %d\n", + xfer, xfer->ep->hcpriv, urb, result); + return result; +} + +/* + * + * + * rpipe->seg_lock is held! + */ +static int __wa_seg_submit(struct wa_rpipe *rpipe, struct wa_xfer *xfer, + struct wa_seg *seg) +{ + int result; + result = usb_submit_urb(&seg->urb, GFP_ATOMIC); + if (result < 0) { + printk(KERN_ERR "xfer %p#%u: REQ submit failed: %d\n", + xfer, seg->index, result); + goto error_seg_submit; + } + if (seg->dto_urb) { + result = usb_submit_urb(seg->dto_urb, GFP_ATOMIC); + if (result < 0) { + printk(KERN_ERR "xfer %p#%u: DTO submit failed: %d\n", + xfer, seg->index, result); + goto error_dto_submit; + } + } + seg->status = WA_SEG_SUBMITTED; + rpipe_avail_dec(rpipe); + return 0; + +error_dto_submit: + usb_unlink_urb(&seg->urb); +error_seg_submit: + seg->status = WA_SEG_ERROR; + seg->result = result; + return result; +} + +/* + * Execute more queued request segments until the maximum concurrent allowed + * + * The ugly unlock/lock sequence on the error path is needed as the + * xfer->lock normally nests the seg_lock and not viceversa. + * + */ +static void wa_xfer_delayed_run(struct wa_rpipe *rpipe) +{ + int result; + struct device *dev = &rpipe->wa->usb_iface->dev; + struct wa_seg *seg; + struct wa_xfer *xfer; + unsigned long flags; + + d_fnstart(1, dev, "(rpipe #%d) %d segments available\n", + le16_to_cpu(rpipe->descr.wRPipeIndex), + atomic_read(&rpipe->segs_available)); + spin_lock_irqsave(&rpipe->seg_lock, flags); + while (atomic_read(&rpipe->segs_available) > 0 + && !list_empty(&rpipe->seg_list)) { + seg = list_entry(rpipe->seg_list.next, struct wa_seg, + list_node); + list_del(&seg->list_node); + xfer = seg->xfer; + result = __wa_seg_submit(rpipe, xfer, seg); + d_printf(1, dev, "xfer %p#%u submitted from delayed " + "[%d segments available] %d\n", + xfer, seg->index, + atomic_read(&rpipe->segs_available), result); + if (unlikely(result < 0)) { + spin_unlock_irqrestore(&rpipe->seg_lock, flags); + spin_lock_irqsave(&xfer->lock, flags); + __wa_xfer_abort(xfer); + xfer->segs_done++; + spin_unlock_irqrestore(&xfer->lock, flags); + spin_lock_irqsave(&rpipe->seg_lock, flags); + } + } + spin_unlock_irqrestore(&rpipe->seg_lock, flags); + d_fnend(1, dev, "(rpipe #%d) = void, %d segments available\n", + le16_to_cpu(rpipe->descr.wRPipeIndex), + atomic_read(&rpipe->segs_available)); + +} + +/* + * + * xfer->lock is taken + * + * On failure submitting we just stop submitting and return error; + * wa_urb_enqueue_b() will execute the completion path + */ +static int __wa_xfer_submit(struct wa_xfer *xfer) +{ + int result; + struct wahc *wa = xfer->wa; + struct device *dev = &wa->usb_iface->dev; + unsigned cnt; + struct wa_seg *seg; + unsigned long flags; + struct wa_rpipe *rpipe = xfer->ep->hcpriv; + size_t maxrequests = le16_to_cpu(rpipe->descr.wRequests); + u8 available; + u8 empty; + + d_fnstart(3, dev, "(xfer %p [rpipe %p])\n", + xfer, xfer->ep->hcpriv); + + spin_lock_irqsave(&wa->xfer_list_lock, flags); + list_add_tail(&xfer->list_node, &wa->xfer_list); + spin_unlock_irqrestore(&wa->xfer_list_lock, flags); + + BUG_ON(atomic_read(&rpipe->segs_available) > maxrequests); + result = 0; + spin_lock_irqsave(&rpipe->seg_lock, flags); + for (cnt = 0; cnt < xfer->segs; cnt++) { + available = atomic_read(&rpipe->segs_available); + empty = list_empty(&rpipe->seg_list); + seg = xfer->seg[cnt]; + d_printf(2, dev, "xfer %p#%u: available %u empty %u (%s)\n", + xfer, cnt, available, empty, + available == 0 || !empty ? "delayed" : "submitted"); + if (available == 0 || !empty) { + d_printf(1, dev, "xfer %p#%u: delayed\n", xfer, cnt); + seg->status = WA_SEG_DELAYED; + list_add_tail(&seg->list_node, &rpipe->seg_list); + } else { + result = __wa_seg_submit(rpipe, xfer, seg); + if (result < 0) + goto error_seg_submit; + } + xfer->segs_submitted++; + } + spin_unlock_irqrestore(&rpipe->seg_lock, flags); + d_fnend(3, dev, "(xfer %p [rpipe %p]) = void\n", xfer, + xfer->ep->hcpriv); + return result; + +error_seg_submit: + __wa_xfer_abort(xfer); + spin_unlock_irqrestore(&rpipe->seg_lock, flags); + d_fnend(3, dev, "(xfer %p [rpipe %p]) = void\n", xfer, + xfer->ep->hcpriv); + return result; +} + +/* + * Second part of a URB/transfer enqueuement + * + * Assumes this comes from wa_urb_enqueue() [maybe through + * wa_urb_enqueue_run()]. At this point: + * + * xfer->wa filled and refcounted + * xfer->ep filled with rpipe refcounted if + * delayed == 0 + * xfer->urb filled and refcounted (this is the case when called + * from wa_urb_enqueue() as we come from usb_submit_urb() + * and when called by wa_urb_enqueue_run(), as we took an + * extra ref dropped by _run() after we return). + * xfer->gfp filled + * + * If we fail at __wa_xfer_submit(), then we just check if we are done + * and if so, we run the completion procedure. However, if we are not + * yet done, we do nothing and wait for the completion handlers from + * the submitted URBs or from the xfer-result path to kick in. If xfer + * result never kicks in, the xfer will timeout from the USB code and + * dequeue() will be called. + */ +static void wa_urb_enqueue_b(struct wa_xfer *xfer) +{ + int result; + unsigned long flags; + struct urb *urb = xfer->urb; + struct wahc *wa = xfer->wa; + struct wusbhc *wusbhc = wa->wusb; + struct device *dev = &wa->usb_iface->dev; + struct wusb_dev *wusb_dev; + unsigned done; + + d_fnstart(3, dev, "(wa %p urb %p)\n", wa, urb); + result = rpipe_get_by_ep(wa, xfer->ep, urb, xfer->gfp); + if (result < 0) + goto error_rpipe_get; + result = -ENODEV; + /* FIXME: segmentation broken -- kills DWA */ + mutex_lock(&wusbhc->mutex); /* get a WUSB dev */ + if (urb->dev == NULL) + goto error_dev_gone; + wusb_dev = __wusb_dev_get_by_usb_dev(wusbhc, urb->dev); + if (wusb_dev == NULL) { + mutex_unlock(&wusbhc->mutex); + goto error_dev_gone; + } + mutex_unlock(&wusbhc->mutex); + + spin_lock_irqsave(&xfer->lock, flags); + xfer->wusb_dev = wusb_dev; + result = urb->status; + if (urb->status != -EINPROGRESS) + goto error_dequeued; + + result = __wa_xfer_setup(xfer, urb); + if (result < 0) + goto error_xfer_setup; + result = __wa_xfer_submit(xfer); + if (result < 0) + goto error_xfer_submit; + spin_unlock_irqrestore(&xfer->lock, flags); + d_fnend(3, dev, "(wa %p urb %p) = void\n", wa, urb); + return; + + /* this is basically wa_xfer_completion() broken up wa_xfer_giveback() + * does a wa_xfer_put() that will call wa_xfer_destroy() and clean + * upundo setup(). + */ +error_xfer_setup: +error_dequeued: + spin_unlock_irqrestore(&xfer->lock, flags); + /* FIXME: segmentation broken, kills DWA */ + if (wusb_dev) + wusb_dev_put(wusb_dev); +error_dev_gone: + rpipe_put(xfer->ep->hcpriv); +error_rpipe_get: + xfer->result = result; + wa_xfer_giveback(xfer); + d_fnend(3, dev, "(wa %p urb %p) = (void) %d\n", wa, urb, result); + return; + +error_xfer_submit: + done = __wa_xfer_is_done(xfer); + xfer->result = result; + spin_unlock_irqrestore(&xfer->lock, flags); + if (done) + wa_xfer_completion(xfer); + d_fnend(3, dev, "(wa %p urb %p) = (void) %d\n", wa, urb, result); + return; +} + +/* + * Execute the delayed transfers in the Wire Adapter @wa + * + * We need to be careful here, as dequeue() could be called in the + * middle. That's why we do the whole thing under the + * wa->xfer_list_lock. If dequeue() jumps in, it first locks urb->lock + * and then checks the list -- so as we would be acquiring in inverse + * order, we just drop the lock once we have the xfer and reacquire it + * later. + */ +void wa_urb_enqueue_run(struct work_struct *ws) +{ + struct wahc *wa = container_of(ws, struct wahc, xfer_work); + struct device *dev = &wa->usb_iface->dev; + struct wa_xfer *xfer, *next; + struct urb *urb; + + d_fnstart(3, dev, "(wa %p)\n", wa); + spin_lock_irq(&wa->xfer_list_lock); + list_for_each_entry_safe(xfer, next, &wa->xfer_delayed_list, + list_node) { + list_del_init(&xfer->list_node); + spin_unlock_irq(&wa->xfer_list_lock); + + urb = xfer->urb; + wa_urb_enqueue_b(xfer); + usb_put_urb(urb); /* taken when queuing */ + + spin_lock_irq(&wa->xfer_list_lock); + } + spin_unlock_irq(&wa->xfer_list_lock); + d_fnend(3, dev, "(wa %p) = void\n", wa); +} +EXPORT_SYMBOL_GPL(wa_urb_enqueue_run); + +/* + * Submit a transfer to the Wire Adapter in a delayed way + * + * The process of enqueuing involves possible sleeps() [see + * enqueue_b(), for the rpipe_get() and the mutex_lock()]. If we are + * in an atomic section, we defer the enqueue_b() call--else we call direct. + * + * @urb: We own a reference to it done by the HCI Linux USB stack that + * will be given up by calling usb_hcd_giveback_urb() or by + * returning error from this function -> ergo we don't have to + * refcount it. + */ +int wa_urb_enqueue(struct wahc *wa, struct usb_host_endpoint *ep, + struct urb *urb, gfp_t gfp) +{ + int result; + struct device *dev = &wa->usb_iface->dev; + struct wa_xfer *xfer; + unsigned long my_flags; + unsigned cant_sleep = irqs_disabled() | in_atomic(); + + d_fnstart(3, dev, "(wa %p ep %p urb %p [%d] gfp 0x%x)\n", + wa, ep, urb, urb->transfer_buffer_length, gfp); + + if (urb->transfer_buffer == NULL + && !(urb->transfer_flags & URB_NO_TRANSFER_DMA_MAP) + && urb->transfer_buffer_length != 0) { + dev_err(dev, "BUG? urb %p: NULL xfer buffer & NODMA\n", urb); + dump_stack(); + } + + result = -ENOMEM; + xfer = kzalloc(sizeof(*xfer), gfp); + if (xfer == NULL) + goto error_kmalloc; + + result = -ENOENT; + if (urb->status != -EINPROGRESS) /* cancelled */ + goto error_dequeued; /* before starting? */ + wa_xfer_init(xfer); + xfer->wa = wa_get(wa); + xfer->urb = urb; + xfer->gfp = gfp; + xfer->ep = ep; + urb->hcpriv = xfer; + d_printf(2, dev, "xfer %p urb %p pipe 0x%02x [%d bytes] %s %s %s\n", + xfer, urb, urb->pipe, urb->transfer_buffer_length, + urb->transfer_flags & URB_NO_TRANSFER_DMA_MAP ? "dma" : "nodma", + urb->pipe & USB_DIR_IN ? "inbound" : "outbound", + cant_sleep ? "deferred" : "inline"); + if (cant_sleep) { + usb_get_urb(urb); + spin_lock_irqsave(&wa->xfer_list_lock, my_flags); + list_add_tail(&xfer->list_node, &wa->xfer_delayed_list); + spin_unlock_irqrestore(&wa->xfer_list_lock, my_flags); + queue_work(wusbd, &wa->xfer_work); + } else { + wa_urb_enqueue_b(xfer); + } + d_fnend(3, dev, "(wa %p ep %p urb %p [%d] gfp 0x%x) = 0\n", + wa, ep, urb, urb->transfer_buffer_length, gfp); + return 0; + +error_dequeued: + kfree(xfer); +error_kmalloc: + d_fnend(3, dev, "(wa %p ep %p urb %p [%d] gfp 0x%x) = %d\n", + wa, ep, urb, urb->transfer_buffer_length, gfp, result); + return result; +} +EXPORT_SYMBOL_GPL(wa_urb_enqueue); + +/* + * Dequeue a URB and make sure uwb_hcd_giveback_urb() [completion + * handler] is called. + * + * Until a transfer goes successfully through wa_urb_enqueue() it + * needs to be dequeued with completion calling; when stuck in delayed + * or before wa_xfer_setup() is called, we need to do completion. + * + * not setup If there is no hcpriv yet, that means that that enqueue + * still had no time to set the xfer up. Because + * urb->status should be other than -EINPROGRESS, + * enqueue() will catch that and bail out. + * + * If the transfer has gone through setup, we just need to clean it + * up. If it has gone through submit(), we have to abort it [with an + * asynch request] and then make sure we cancel each segment. + * + */ +int wa_urb_dequeue(struct wahc *wa, struct urb *urb) +{ + struct device *dev = &wa->usb_iface->dev; + unsigned long flags, flags2; + struct wa_xfer *xfer; + struct wa_seg *seg; + struct wa_rpipe *rpipe; + unsigned cnt; + unsigned rpipe_ready = 0; + + d_fnstart(3, dev, "(wa %p, urb %p)\n", wa, urb); + + d_printf(1, dev, "xfer %p urb %p: aborting\n", urb->hcpriv, urb); + xfer = urb->hcpriv; + if (xfer == NULL) { + /* NOthing setup yet enqueue will see urb->status != + * -EINPROGRESS (by hcd layer) and bail out with + * error, no need to do completion + */ + BUG_ON(urb->status == -EINPROGRESS); + goto out; + } + spin_lock_irqsave(&xfer->lock, flags); + rpipe = xfer->ep->hcpriv; + /* Check the delayed list -> if there, release and complete */ + spin_lock_irqsave(&wa->xfer_list_lock, flags2); + if (!list_empty(&xfer->list_node) && xfer->seg == NULL) + goto dequeue_delayed; + spin_unlock_irqrestore(&wa->xfer_list_lock, flags2); + if (xfer->seg == NULL) /* still hasn't reached */ + goto out_unlock; /* setup(), enqueue_b() completes */ + /* Ok, the xfer is in flight already, it's been setup and submitted.*/ + __wa_xfer_abort(xfer); + for (cnt = 0; cnt < xfer->segs; cnt++) { + seg = xfer->seg[cnt]; + switch (seg->status) { + case WA_SEG_NOTREADY: + case WA_SEG_READY: + printk(KERN_ERR "xfer %p#%u: dequeue bad state %u\n", + xfer, cnt, seg->status); + WARN_ON(1); + break; + case WA_SEG_DELAYED: + seg->status = WA_SEG_ABORTED; + spin_lock_irqsave(&rpipe->seg_lock, flags2); + list_del(&seg->list_node); + xfer->segs_done++; + rpipe_ready = rpipe_avail_inc(rpipe); + spin_unlock_irqrestore(&rpipe->seg_lock, flags2); + break; + case WA_SEG_SUBMITTED: + seg->status = WA_SEG_ABORTED; + usb_unlink_urb(&seg->urb); + if (xfer->is_inbound == 0) + usb_unlink_urb(seg->dto_urb); + xfer->segs_done++; + rpipe_ready = rpipe_avail_inc(rpipe); + break; + case WA_SEG_PENDING: + seg->status = WA_SEG_ABORTED; + xfer->segs_done++; + rpipe_ready = rpipe_avail_inc(rpipe); + break; + case WA_SEG_DTI_PENDING: + usb_unlink_urb(wa->dti_urb); + seg->status = WA_SEG_ABORTED; + xfer->segs_done++; + rpipe_ready = rpipe_avail_inc(rpipe); + break; + case WA_SEG_DONE: + case WA_SEG_ERROR: + case WA_SEG_ABORTED: + break; + } + } + xfer->result = urb->status; /* -ENOENT or -ECONNRESET */ + __wa_xfer_is_done(xfer); + spin_unlock_irqrestore(&xfer->lock, flags); + wa_xfer_completion(xfer); + if (rpipe_ready) + wa_xfer_delayed_run(rpipe); + d_fnend(3, dev, "(wa %p, urb %p) = 0\n", wa, urb); + return 0; + +out_unlock: + spin_unlock_irqrestore(&xfer->lock, flags); +out: + d_fnend(3, dev, "(wa %p, urb %p) = 0\n", wa, urb); + return 0; + +dequeue_delayed: + list_del_init(&xfer->list_node); + spin_unlock_irqrestore(&wa->xfer_list_lock, flags2); + xfer->result = urb->status; + spin_unlock_irqrestore(&xfer->lock, flags); + wa_xfer_giveback(xfer); + usb_put_urb(urb); /* we got a ref in enqueue() */ + d_fnend(3, dev, "(wa %p, urb %p) = 0\n", wa, urb); + return 0; +} +EXPORT_SYMBOL_GPL(wa_urb_dequeue); + +/* + * Translation from WA status codes (WUSB1.0 Table 8.15) to errno + * codes + * + * Positive errno values are internal inconsistencies and should be + * flagged louder. Negative are to be passed up to the user in the + * normal way. + * + * @status: USB WA status code -- high two bits are stripped. + */ +static int wa_xfer_status_to_errno(u8 status) +{ + int errno; + u8 real_status = status; + static int xlat[] = { + [WA_XFER_STATUS_SUCCESS] = 0, + [WA_XFER_STATUS_HALTED] = -EPIPE, + [WA_XFER_STATUS_DATA_BUFFER_ERROR] = -ENOBUFS, + [WA_XFER_STATUS_BABBLE] = -EOVERFLOW, + [WA_XFER_RESERVED] = EINVAL, + [WA_XFER_STATUS_NOT_FOUND] = 0, + [WA_XFER_STATUS_INSUFFICIENT_RESOURCE] = -ENOMEM, + [WA_XFER_STATUS_TRANSACTION_ERROR] = -EILSEQ, + [WA_XFER_STATUS_ABORTED] = -EINTR, + [WA_XFER_STATUS_RPIPE_NOT_READY] = EINVAL, + [WA_XFER_INVALID_FORMAT] = EINVAL, + [WA_XFER_UNEXPECTED_SEGMENT_NUMBER] = EINVAL, + [WA_XFER_STATUS_RPIPE_TYPE_MISMATCH] = EINVAL, + }; + status &= 0x3f; + + if (status == 0) + return 0; + if (status >= ARRAY_SIZE(xlat)) { + if (printk_ratelimit()) + printk(KERN_ERR "%s(): BUG? " + "Unknown WA transfer status 0x%02x\n", + __func__, real_status); + return -EINVAL; + } + errno = xlat[status]; + if (unlikely(errno > 0)) { + if (printk_ratelimit()) + printk(KERN_ERR "%s(): BUG? " + "Inconsistent WA status: 0x%02x\n", + __func__, real_status); + errno = -errno; + } + return errno; +} + +/* + * Process a xfer result completion message + * + * inbound transfers: need to schedule a DTI read + * + * FIXME: this functio needs to be broken up in parts + */ +static void wa_xfer_result_chew(struct wahc *wa, struct wa_xfer *xfer) +{ + int result; + struct device *dev = &wa->usb_iface->dev; + unsigned long flags; + u8 seg_idx; + struct wa_seg *seg; + struct wa_rpipe *rpipe; + struct wa_xfer_result *xfer_result = wa->xfer_result; + u8 done = 0; + u8 usb_status; + unsigned rpipe_ready = 0; + + d_fnstart(3, dev, "(wa %p xfer %p)\n", wa, xfer); + spin_lock_irqsave(&xfer->lock, flags); + seg_idx = xfer_result->bTransferSegment & 0x7f; + if (unlikely(seg_idx >= xfer->segs)) + goto error_bad_seg; + seg = xfer->seg[seg_idx]; + rpipe = xfer->ep->hcpriv; + usb_status = xfer_result->bTransferStatus; + d_printf(2, dev, "xfer %p#%u: bTransferStatus 0x%02x (seg %u)\n", + xfer, seg_idx, usb_status, seg->status); + if (seg->status == WA_SEG_ABORTED + || seg->status == WA_SEG_ERROR) /* already handled */ + goto segment_aborted; + if (seg->status == WA_SEG_SUBMITTED) /* ops, got here */ + seg->status = WA_SEG_PENDING; /* before wa_seg{_dto}_cb() */ + if (seg->status != WA_SEG_PENDING) { + if (printk_ratelimit()) + dev_err(dev, "xfer %p#%u: Bad segment state %u\n", + xfer, seg_idx, seg->status); + seg->status = WA_SEG_PENDING; /* workaround/"fix" it */ + } + if (usb_status & 0x80) { + seg->result = wa_xfer_status_to_errno(usb_status); + dev_err(dev, "DTI: xfer %p#%u failed (0x%02x)\n", + xfer, seg->index, usb_status); + goto error_complete; + } + /* FIXME: we ignore warnings, tally them for stats */ + if (usb_status & 0x40) /* Warning?... */ + usb_status = 0; /* ... pass */ + if (xfer->is_inbound) { /* IN data phase: read to buffer */ + seg->status = WA_SEG_DTI_PENDING; + BUG_ON(wa->buf_in_urb->status == -EINPROGRESS); + if (xfer->is_dma) { + wa->buf_in_urb->transfer_dma = + xfer->urb->transfer_dma + + seg_idx * xfer->seg_size; + wa->buf_in_urb->transfer_flags + |= URB_NO_TRANSFER_DMA_MAP; + } else { + wa->buf_in_urb->transfer_buffer = + xfer->urb->transfer_buffer + + seg_idx * xfer->seg_size; + wa->buf_in_urb->transfer_flags + &= ~URB_NO_TRANSFER_DMA_MAP; + } + wa->buf_in_urb->transfer_buffer_length = + le32_to_cpu(xfer_result->dwTransferLength); + wa->buf_in_urb->context = seg; + result = usb_submit_urb(wa->buf_in_urb, GFP_ATOMIC); + if (result < 0) + goto error_submit_buf_in; + } else { + /* OUT data phase, complete it -- */ + seg->status = WA_SEG_DONE; + seg->result = le32_to_cpu(xfer_result->dwTransferLength); + xfer->segs_done++; + rpipe_ready = rpipe_avail_inc(rpipe); + done = __wa_xfer_is_done(xfer); + } + spin_unlock_irqrestore(&xfer->lock, flags); + if (done) + wa_xfer_completion(xfer); + if (rpipe_ready) + wa_xfer_delayed_run(rpipe); + d_fnend(3, dev, "(wa %p xfer %p) = void\n", wa, xfer); + return; + + +error_submit_buf_in: + if (edc_inc(&wa->dti_edc, EDC_MAX_ERRORS, EDC_ERROR_TIMEFRAME)) { + dev_err(dev, "DTI: URB max acceptable errors " + "exceeded, resetting device\n"); + wa_reset_all(wa); + } + if (printk_ratelimit()) + dev_err(dev, "xfer %p#%u: can't submit DTI data phase: %d\n", + xfer, seg_idx, result); + seg->result = result; +error_complete: + seg->status = WA_SEG_ERROR; + xfer->segs_done++; + rpipe_ready = rpipe_avail_inc(rpipe); + __wa_xfer_abort(xfer); + done = __wa_xfer_is_done(xfer); + spin_unlock_irqrestore(&xfer->lock, flags); + if (done) + wa_xfer_completion(xfer); + if (rpipe_ready) + wa_xfer_delayed_run(rpipe); + d_fnend(3, dev, "(wa %p xfer %p) = void [segment/DTI-submit error]\n", + wa, xfer); + return; + + +error_bad_seg: + spin_unlock_irqrestore(&xfer->lock, flags); + wa_urb_dequeue(wa, xfer->urb); + if (printk_ratelimit()) + dev_err(dev, "xfer %p#%u: bad segment\n", xfer, seg_idx); + if (edc_inc(&wa->dti_edc, EDC_MAX_ERRORS, EDC_ERROR_TIMEFRAME)) { + dev_err(dev, "DTI: URB max acceptable errors " + "exceeded, resetting device\n"); + wa_reset_all(wa); + } + d_fnend(3, dev, "(wa %p xfer %p) = void [bad seg]\n", wa, xfer); + return; + + +segment_aborted: + /* nothing to do, as the aborter did the completion */ + spin_unlock_irqrestore(&xfer->lock, flags); + d_fnend(3, dev, "(wa %p xfer %p) = void [segment aborted]\n", + wa, xfer); + return; + +} + +/* + * Callback for the IN data phase + * + * If succesful transition state; otherwise, take a note of the + * error, mark this segment done and try completion. + * + * Note we don't access until we are sure that the transfer hasn't + * been cancelled (ECONNRESET, ENOENT), which could mean that + * seg->xfer could be already gone. + */ +static void wa_buf_in_cb(struct urb *urb) +{ + struct wa_seg *seg = urb->context; + struct wa_xfer *xfer = seg->xfer; + struct wahc *wa; + struct device *dev; + struct wa_rpipe *rpipe; + unsigned rpipe_ready; + unsigned long flags; + u8 done = 0; + + d_fnstart(3, NULL, "(urb %p [%d])\n", urb, urb->status); + switch (urb->status) { + case 0: + spin_lock_irqsave(&xfer->lock, flags); + wa = xfer->wa; + dev = &wa->usb_iface->dev; + rpipe = xfer->ep->hcpriv; + d_printf(2, dev, "xfer %p#%u: data in done (%zu bytes)\n", + xfer, seg->index, (size_t)urb->actual_length); + seg->status = WA_SEG_DONE; + seg->result = urb->actual_length; + xfer->segs_done++; + rpipe_ready = rpipe_avail_inc(rpipe); + done = __wa_xfer_is_done(xfer); + spin_unlock_irqrestore(&xfer->lock, flags); + if (done) + wa_xfer_completion(xfer); + if (rpipe_ready) + wa_xfer_delayed_run(rpipe); + break; + case -ECONNRESET: /* URB unlinked; no need to do anything */ + case -ENOENT: /* as it was done by the who unlinked us */ + break; + default: /* Other errors ... */ + spin_lock_irqsave(&xfer->lock, flags); + wa = xfer->wa; + dev = &wa->usb_iface->dev; + rpipe = xfer->ep->hcpriv; + if (printk_ratelimit()) + dev_err(dev, "xfer %p#%u: data in error %d\n", + xfer, seg->index, urb->status); + if (edc_inc(&wa->nep_edc, EDC_MAX_ERRORS, + EDC_ERROR_TIMEFRAME)){ + dev_err(dev, "DTO: URB max acceptable errors " + "exceeded, resetting device\n"); + wa_reset_all(wa); + } + seg->status = WA_SEG_ERROR; + seg->result = urb->status; + xfer->segs_done++; + rpipe_ready = rpipe_avail_inc(rpipe); + __wa_xfer_abort(xfer); + done = __wa_xfer_is_done(xfer); + spin_unlock_irqrestore(&xfer->lock, flags); + if (done) + wa_xfer_completion(xfer); + if (rpipe_ready) + wa_xfer_delayed_run(rpipe); + } + d_fnend(3, NULL, "(urb %p [%d]) = void\n", urb, urb->status); +} + +/* + * Handle an incoming transfer result buffer + * + * Given a transfer result buffer, it completes the transfer (possibly + * scheduling and buffer in read) and then resubmits the DTI URB for a + * new transfer result read. + * + * + * The xfer_result DTI URB state machine + * + * States: OFF | RXR (Read-Xfer-Result) | RBI (Read-Buffer-In) + * + * We start in OFF mode, the first xfer_result notification [through + * wa_handle_notif_xfer()] moves us to RXR by posting the DTI-URB to + * read. + * + * We receive a buffer -- if it is not a xfer_result, we complain and + * repost the DTI-URB. If it is a xfer_result then do the xfer seg + * request accounting. If it is an IN segment, we move to RBI and post + * a BUF-IN-URB to the right buffer. The BUF-IN-URB callback will + * repost the DTI-URB and move to RXR state. if there was no IN + * segment, it will repost the DTI-URB. + * + * We go back to OFF when we detect a ENOENT or ESHUTDOWN (or too many + * errors) in the URBs. + */ +static void wa_xfer_result_cb(struct urb *urb) +{ + int result; + struct wahc *wa = urb->context; + struct device *dev = &wa->usb_iface->dev; + struct wa_xfer_result *xfer_result; + u32 xfer_id; + struct wa_xfer *xfer; + u8 usb_status; + + d_fnstart(3, dev, "(%p)\n", wa); + BUG_ON(wa->dti_urb != urb); + switch (wa->dti_urb->status) { + case 0: + /* We have a xfer result buffer; check it */ + d_printf(2, dev, "DTI: xfer result %d bytes at %p\n", + urb->actual_length, urb->transfer_buffer); + d_dump(3, dev, urb->transfer_buffer, urb->actual_length); + if (wa->dti_urb->actual_length != sizeof(*xfer_result)) { + dev_err(dev, "DTI Error: xfer result--bad size " + "xfer result (%d bytes vs %zu needed)\n", + urb->actual_length, sizeof(*xfer_result)); + break; + } + xfer_result = wa->xfer_result; + if (xfer_result->hdr.bLength != sizeof(*xfer_result)) { + dev_err(dev, "DTI Error: xfer result--" + "bad header length %u\n", + xfer_result->hdr.bLength); + break; + } + if (xfer_result->hdr.bNotifyType != WA_XFER_RESULT) { + dev_err(dev, "DTI Error: xfer result--" + "bad header type 0x%02x\n", + xfer_result->hdr.bNotifyType); + break; + } + usb_status = xfer_result->bTransferStatus & 0x3f; + if (usb_status == WA_XFER_STATUS_ABORTED + || usb_status == WA_XFER_STATUS_NOT_FOUND) + /* taken care of already */ + break; + xfer_id = xfer_result->dwTransferID; + xfer = wa_xfer_get_by_id(wa, xfer_id); + if (xfer == NULL) { + /* FIXME: transaction might have been cancelled */ + dev_err(dev, "DTI Error: xfer result--" + "unknown xfer 0x%08x (status 0x%02x)\n", + xfer_id, usb_status); + break; + } + wa_xfer_result_chew(wa, xfer); + wa_xfer_put(xfer); + break; + case -ENOENT: /* (we killed the URB)...so, no broadcast */ + case -ESHUTDOWN: /* going away! */ + dev_dbg(dev, "DTI: going down! %d\n", urb->status); + goto out; + default: + /* Unknown error */ + if (edc_inc(&wa->dti_edc, EDC_MAX_ERRORS, + EDC_ERROR_TIMEFRAME)) { + dev_err(dev, "DTI: URB max acceptable errors " + "exceeded, resetting device\n"); + wa_reset_all(wa); + goto out; + } + if (printk_ratelimit()) + dev_err(dev, "DTI: URB error %d\n", urb->status); + break; + } + /* Resubmit the DTI URB */ + result = usb_submit_urb(wa->dti_urb, GFP_ATOMIC); + if (result < 0) { + dev_err(dev, "DTI Error: Could not submit DTI URB (%d), " + "resetting\n", result); + wa_reset_all(wa); + } +out: + d_fnend(3, dev, "(%p) = void\n", wa); + return; +} + +/* + * Transfer complete notification + * + * Called from the notif.c code. We get a notification on EP2 saying + * that some endpoint has some transfer result data available. We are + * about to read it. + * + * To speed up things, we always have a URB reading the DTI URB; we + * don't really set it up and start it until the first xfer complete + * notification arrives, which is what we do here. + * + * Follow up in wa_xfer_result_cb(), as that's where the whole state + * machine starts. + * + * So here we just initialize the DTI URB for reading transfer result + * notifications and also the buffer-in URB, for reading buffers. Then + * we just submit the DTI URB. + * + * @wa shall be referenced + */ +void wa_handle_notif_xfer(struct wahc *wa, struct wa_notif_hdr *notif_hdr) +{ + int result; + struct device *dev = &wa->usb_iface->dev; + struct wa_notif_xfer *notif_xfer; + const struct usb_endpoint_descriptor *dti_epd = wa->dti_epd; + + d_fnstart(4, dev, "(%p, %p)\n", wa, notif_hdr); + notif_xfer = container_of(notif_hdr, struct wa_notif_xfer, hdr); + BUG_ON(notif_hdr->bNotifyType != WA_NOTIF_TRANSFER); + + if ((0x80 | notif_xfer->bEndpoint) != dti_epd->bEndpointAddress) { + /* FIXME: hardcoded limitation, adapt */ + dev_err(dev, "BUG: DTI ep is %u, not %u (hack me)\n", + notif_xfer->bEndpoint, dti_epd->bEndpointAddress); + goto error; + } + if (wa->dti_urb != NULL) /* DTI URB already started */ + goto out; + + wa->dti_urb = usb_alloc_urb(0, GFP_KERNEL); + if (wa->dti_urb == NULL) { + dev_err(dev, "Can't allocate DTI URB\n"); + goto error_dti_urb_alloc; + } + usb_fill_bulk_urb( + wa->dti_urb, wa->usb_dev, + usb_rcvbulkpipe(wa->usb_dev, 0x80 | notif_xfer->bEndpoint), + wa->xfer_result, wa->xfer_result_size, + wa_xfer_result_cb, wa); + + wa->buf_in_urb = usb_alloc_urb(0, GFP_KERNEL); + if (wa->buf_in_urb == NULL) { + dev_err(dev, "Can't allocate BUF-IN URB\n"); + goto error_buf_in_urb_alloc; + } + usb_fill_bulk_urb( + wa->buf_in_urb, wa->usb_dev, + usb_rcvbulkpipe(wa->usb_dev, 0x80 | notif_xfer->bEndpoint), + NULL, 0, wa_buf_in_cb, wa); + result = usb_submit_urb(wa->dti_urb, GFP_KERNEL); + if (result < 0) { + dev_err(dev, "DTI Error: Could not submit DTI URB (%d), " + "resetting\n", result); + goto error_dti_urb_submit; + } +out: + d_fnend(4, dev, "(%p, %p) = void\n", wa, notif_hdr); + return; + +error_dti_urb_submit: + usb_put_urb(wa->buf_in_urb); +error_buf_in_urb_alloc: + usb_put_urb(wa->dti_urb); + wa->dti_urb = NULL; +error_dti_urb_alloc: +error: + wa_reset_all(wa); + d_fnend(4, dev, "(%p, %p) = void\n", wa, notif_hdr); + return; +} diff --git a/drivers/usb/wusbcore/wusbhc.c b/drivers/usb/wusbcore/wusbhc.c new file mode 100644 index 000000000000..07c63a31c799 --- /dev/null +++ b/drivers/usb/wusbcore/wusbhc.c @@ -0,0 +1,418 @@ +/* + * Wireless USB Host Controller + * sysfs glue, wusbcore module support and life cycle management + * + * + * Copyright (C) 2005-2006 Intel Corporation + * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + * + * + * Creation/destruction of wusbhc is split in two parts; that that + * doesn't require the HCD to be added (wusbhc_{create,destroy}) and + * the one that requires (phase B, wusbhc_b_{create,destroy}). + * + * This is so because usb_add_hcd() will start the HC, and thus, all + * the HC specific stuff has to be already initialiazed (like sysfs + * thingies). + */ +#include <linux/device.h> +#include <linux/module.h> +#include "wusbhc.h" + +/** + * Extract the wusbhc that corresponds to a USB Host Controller class device + * + * WARNING! Apply only if @dev is that of a + * wusbhc.usb_hcd.self->class_dev; otherwise, you loose. + */ +static struct wusbhc *usbhc_dev_to_wusbhc(struct device *dev) +{ + struct usb_bus *usb_bus = dev_get_drvdata(dev); + struct usb_hcd *usb_hcd = bus_to_hcd(usb_bus); + return usb_hcd_to_wusbhc(usb_hcd); +} + +/* + * Show & store the current WUSB trust timeout + * + * We don't do locking--it is an 'atomic' value. + * + * The units that we store/show are always MILLISECONDS. However, the + * value of trust_timeout is jiffies. + */ +static ssize_t wusb_trust_timeout_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct wusbhc *wusbhc = usbhc_dev_to_wusbhc(dev); + + return scnprintf(buf, PAGE_SIZE, "%u\n", wusbhc->trust_timeout); +} + +static ssize_t wusb_trust_timeout_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t size) +{ + struct wusbhc *wusbhc = usbhc_dev_to_wusbhc(dev); + ssize_t result = -ENOSYS; + unsigned trust_timeout; + + result = sscanf(buf, "%u", &trust_timeout); + if (result != 1) { + result = -EINVAL; + goto out; + } + /* FIXME: maybe we should check for range validity? */ + wusbhc->trust_timeout = trust_timeout; + cancel_delayed_work(&wusbhc->keep_alive_timer); + flush_workqueue(wusbd); + queue_delayed_work(wusbd, &wusbhc->keep_alive_timer, + (trust_timeout * CONFIG_HZ)/1000/2); +out: + return result < 0 ? result : size; +} +static DEVICE_ATTR(wusb_trust_timeout, 0644, wusb_trust_timeout_show, + wusb_trust_timeout_store); + +/* + * Show & store the current WUSB CHID + */ +static ssize_t wusb_chid_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct wusbhc *wusbhc = usbhc_dev_to_wusbhc(dev); + ssize_t result = 0; + + if (wusbhc->wuie_host_info != NULL) + result += ckhdid_printf(buf, PAGE_SIZE, + &wusbhc->wuie_host_info->CHID); + return result; +} + +/* + * Store a new CHID + * + * This will (FIXME) trigger many changes. + * + * - Send an all zeros CHID and it will stop the controller + * - Send a non-zero CHID and it will start it + * (unless it was started, it will just change the CHID, + * diconnecting all devices first). + * + * So first we scan the MMC we are sent and then we act on it. We + * read it in the same format as we print it, an ASCII string of 16 + * hex bytes. + * + * See wusbhc_chid_set() for more info. + */ +static ssize_t wusb_chid_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t size) +{ + struct wusbhc *wusbhc = usbhc_dev_to_wusbhc(dev); + struct wusb_ckhdid chid; + ssize_t result; + + result = sscanf(buf, + "%02hhx %02hhx %02hhx %02hhx " + "%02hhx %02hhx %02hhx %02hhx " + "%02hhx %02hhx %02hhx %02hhx " + "%02hhx %02hhx %02hhx %02hhx\n", + &chid.data[0] , &chid.data[1] , + &chid.data[2] , &chid.data[3] , + &chid.data[4] , &chid.data[5] , + &chid.data[6] , &chid.data[7] , + &chid.data[8] , &chid.data[9] , + &chid.data[10], &chid.data[11], + &chid.data[12], &chid.data[13], + &chid.data[14], &chid.data[15]); + if (result != 16) { + dev_err(dev, "Unrecognized CHID (need 16 8-bit hex digits): " + "%d\n", (int)result); + return -EINVAL; + } + result = wusbhc_chid_set(wusbhc, &chid); + return result < 0 ? result : size; +} +static DEVICE_ATTR(wusb_chid, 0644, wusb_chid_show, wusb_chid_store); + +/* Group all the WUSBHC attributes */ +static struct attribute *wusbhc_attrs[] = { + &dev_attr_wusb_trust_timeout.attr, + &dev_attr_wusb_chid.attr, + NULL, +}; + +static struct attribute_group wusbhc_attr_group = { + .name = NULL, /* we want them in the same directory */ + .attrs = wusbhc_attrs, +}; + +/* + * Create a wusbhc instance + * + * NOTEs: + * + * - assumes *wusbhc has been zeroed and wusbhc->usb_hcd has been + * initialized but not added. + * + * - fill out ports_max, mmcies_max and mmcie_{add,rm} before calling. + * + * - fill out wusbhc->uwb_rc and refcount it before calling + * - fill out the wusbhc->sec_modes array + */ +int wusbhc_create(struct wusbhc *wusbhc) +{ + int result = 0; + + wusbhc->trust_timeout = WUSB_TRUST_TIMEOUT_MS; + mutex_init(&wusbhc->mutex); + result = wusbhc_mmcie_create(wusbhc); + if (result < 0) + goto error_mmcie_create; + result = wusbhc_devconnect_create(wusbhc); + if (result < 0) + goto error_devconnect_create; + result = wusbhc_rh_create(wusbhc); + if (result < 0) + goto error_rh_create; + result = wusbhc_sec_create(wusbhc); + if (result < 0) + goto error_sec_create; + return 0; + +error_sec_create: + wusbhc_rh_destroy(wusbhc); +error_rh_create: + wusbhc_devconnect_destroy(wusbhc); +error_devconnect_create: + wusbhc_mmcie_destroy(wusbhc); +error_mmcie_create: + return result; +} +EXPORT_SYMBOL_GPL(wusbhc_create); + +static inline struct kobject *wusbhc_kobj(struct wusbhc *wusbhc) +{ + return &wusbhc->usb_hcd.self.controller->kobj; +} + +/* + * Phase B of a wusbhc instance creation + * + * Creates fields that depend on wusbhc->usb_hcd having been + * added. This is where we create the sysfs files in + * /sys/class/usb_host/usb_hostX/. + * + * NOTE: Assumes wusbhc->usb_hcd has been already added by the upper + * layer (hwahc or whci) + */ +int wusbhc_b_create(struct wusbhc *wusbhc) +{ + int result = 0; + struct device *dev = wusbhc->usb_hcd.self.controller; + + result = sysfs_create_group(wusbhc_kobj(wusbhc), &wusbhc_attr_group); + if (result < 0) { + dev_err(dev, "Cannot register WUSBHC attributes: %d\n", result); + goto error_create_attr_group; + } + + result = wusbhc_pal_register(wusbhc); + if (result < 0) + goto error_pal_register; + return 0; + +error_pal_register: + sysfs_remove_group(wusbhc_kobj(wusbhc), &wusbhc_attr_group); +error_create_attr_group: + return result; +} +EXPORT_SYMBOL_GPL(wusbhc_b_create); + +void wusbhc_b_destroy(struct wusbhc *wusbhc) +{ + wusbhc_pal_unregister(wusbhc); + sysfs_remove_group(wusbhc_kobj(wusbhc), &wusbhc_attr_group); +} +EXPORT_SYMBOL_GPL(wusbhc_b_destroy); + +void wusbhc_destroy(struct wusbhc *wusbhc) +{ + wusbhc_sec_destroy(wusbhc); + wusbhc_rh_destroy(wusbhc); + wusbhc_devconnect_destroy(wusbhc); + wusbhc_mmcie_destroy(wusbhc); +} +EXPORT_SYMBOL_GPL(wusbhc_destroy); + +struct workqueue_struct *wusbd; +EXPORT_SYMBOL_GPL(wusbd); + +/* + * WUSB Cluster ID allocation map + * + * Each WUSB bus in a channel is identified with a Cluster Id in the + * unauth address pace (WUSB1.0[4.3]). We take the range 0xe0 to 0xff + * (that's space for 31 WUSB controllers, as 0xff can't be taken). We + * start taking from 0xff, 0xfe, 0xfd... (hence the += or -= 0xff). + * + * For each one we taken, we pin it in the bitap + */ +#define CLUSTER_IDS 32 +static DECLARE_BITMAP(wusb_cluster_id_table, CLUSTER_IDS); +static DEFINE_SPINLOCK(wusb_cluster_ids_lock); + +/* + * Get a WUSB Cluster ID + * + * Need to release with wusb_cluster_id_put() when done w/ it. + */ +/* FIXME: coordinate with the choose_addres() from the USB stack */ +/* we want to leave the top of the 128 range for cluster addresses and + * the bottom for device addresses (as we map them one on one with + * ports). */ +u8 wusb_cluster_id_get(void) +{ + u8 id; + spin_lock(&wusb_cluster_ids_lock); + id = find_first_zero_bit(wusb_cluster_id_table, CLUSTER_IDS); + if (id > CLUSTER_IDS) { + id = 0; + goto out; + } + set_bit(id, wusb_cluster_id_table); + id = (u8) 0xff - id; +out: + spin_unlock(&wusb_cluster_ids_lock); + return id; + +} +EXPORT_SYMBOL_GPL(wusb_cluster_id_get); + +/* + * Release a WUSB Cluster ID + * + * Obtained it with wusb_cluster_id_get() + */ +void wusb_cluster_id_put(u8 id) +{ + id = 0xff - id; + BUG_ON(id >= CLUSTER_IDS); + spin_lock(&wusb_cluster_ids_lock); + WARN_ON(!test_bit(id, wusb_cluster_id_table)); + clear_bit(id, wusb_cluster_id_table); + spin_unlock(&wusb_cluster_ids_lock); +} +EXPORT_SYMBOL_GPL(wusb_cluster_id_put); + +/** + * wusbhc_giveback_urb - return an URB to the USB core + * @wusbhc: the host controller the URB is from. + * @urb: the URB. + * @status: the URB's status. + * + * Return an URB to the USB core doing some additional WUSB specific + * processing. + * + * - After a successful transfer, update the trust timeout timestamp + * for the WUSB device. + * + * - [WUSB] sections 4.13 and 7.5.1 specifies the stop retrasmittion + * condition for the WCONNECTACK_IE is that the host has observed + * the associated device responding to a control transfer. + */ +void wusbhc_giveback_urb(struct wusbhc *wusbhc, struct urb *urb, int status) +{ + struct wusb_dev *wusb_dev = __wusb_dev_get_by_usb_dev(wusbhc, urb->dev); + + if (status == 0) { + wusb_dev->entry_ts = jiffies; + + /* wusbhc_devconnect_acked() can't be called from from + atomic context so defer it to a work queue. */ + if (!list_empty(&wusb_dev->cack_node)) + queue_work(wusbd, &wusb_dev->devconnect_acked_work); + } + + usb_hcd_giveback_urb(&wusbhc->usb_hcd, urb, status); +} +EXPORT_SYMBOL_GPL(wusbhc_giveback_urb); + +/** + * wusbhc_reset_all - reset the HC hardware + * @wusbhc: the host controller to reset. + * + * Request a full hardware reset of the chip. This will also reset + * the radio controller and any other PALs. + */ +void wusbhc_reset_all(struct wusbhc *wusbhc) +{ + uwb_rc_reset_all(wusbhc->uwb_rc); +} +EXPORT_SYMBOL_GPL(wusbhc_reset_all); + +static struct notifier_block wusb_usb_notifier = { + .notifier_call = wusb_usb_ncb, + .priority = INT_MAX /* Need to be called first of all */ +}; + +static int __init wusbcore_init(void) +{ + int result; + result = wusb_crypto_init(); + if (result < 0) + goto error_crypto_init; + /* WQ is singlethread because we need to serialize notifications */ + wusbd = create_singlethread_workqueue("wusbd"); + if (wusbd == NULL) { + result = -ENOMEM; + printk(KERN_ERR "WUSB-core: Cannot create wusbd workqueue\n"); + goto error_wusbd_create; + } + usb_register_notify(&wusb_usb_notifier); + bitmap_zero(wusb_cluster_id_table, CLUSTER_IDS); + set_bit(0, wusb_cluster_id_table); /* reserve Cluster ID 0xff */ + return 0; + +error_wusbd_create: + wusb_crypto_exit(); +error_crypto_init: + return result; + +} +module_init(wusbcore_init); + +static void __exit wusbcore_exit(void) +{ + clear_bit(0, wusb_cluster_id_table); + if (!bitmap_empty(wusb_cluster_id_table, CLUSTER_IDS)) { + char buf[256]; + bitmap_scnprintf(buf, sizeof(buf), wusb_cluster_id_table, + CLUSTER_IDS); + printk(KERN_ERR "BUG: WUSB Cluster IDs not released " + "on exit: %s\n", buf); + WARN_ON(1); + } + usb_unregister_notify(&wusb_usb_notifier); + destroy_workqueue(wusbd); + wusb_crypto_exit(); +} +module_exit(wusbcore_exit); + +MODULE_AUTHOR("Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>"); +MODULE_DESCRIPTION("Wireless USB core"); +MODULE_LICENSE("GPL"); diff --git a/drivers/usb/wusbcore/wusbhc.h b/drivers/usb/wusbcore/wusbhc.h new file mode 100644 index 000000000000..d0c132434f1b --- /dev/null +++ b/drivers/usb/wusbcore/wusbhc.h @@ -0,0 +1,495 @@ +/* + * Wireless USB Host Controller + * Common infrastructure for WHCI and HWA WUSB-HC drivers + * + * + * Copyright (C) 2005-2006 Intel Corporation + * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + * + * + * This driver implements parts common to all Wireless USB Host + * Controllers (struct wusbhc, embedding a struct usb_hcd) and is used + * by: + * + * - hwahc: HWA, USB-dongle that implements a Wireless USB host + * controller, (Wireless USB 1.0 Host-Wire-Adapter specification). + * + * - whci: WHCI, a PCI card with a wireless host controller + * (Wireless Host Controller Interface 1.0 specification). + * + * Check out the Design-overview.txt file in the source documentation + * for other details on the implementation. + * + * Main blocks: + * + * rh Root Hub emulation (part of the HCD glue) + * + * devconnect Handle all the issues related to device connection, + * authentication, disconnection, timeout, reseting, + * keepalives, etc. + * + * mmc MMC IE broadcasting handling + * + * A host controller driver just initializes its stuff and as part of + * that, creates a 'struct wusbhc' instance that handles all the + * common WUSB mechanisms. Links in the function ops that are specific + * to it and then registers the host controller. Ready to run. + */ + +#ifndef __WUSBHC_H__ +#define __WUSBHC_H__ + +#include <linux/usb.h> +#include <linux/list.h> +#include <linux/mutex.h> +#include <linux/kref.h> +#include <linux/workqueue.h> +/* FIXME: Yes, I know: BAD--it's not my fault the USB HC iface is not + * public */ +#include <linux/../../drivers/usb/core/hcd.h> +#include <linux/uwb.h> +#include <linux/usb/wusb.h> + + +/** + * Wireless USB device + * + * Describe a WUSB device connected to the cluster. This struct + * belongs to the 'struct wusb_port' it is attached to and it is + * responsible for putting and clearing the pointer to it. + * + * Note this "complements" the 'struct usb_device' that the usb_hcd + * keeps for each connected USB device. However, it extends some + * information that is not available (there is no hcpriv ptr in it!) + * *and* most importantly, it's life cycle is different. It is created + * as soon as we get a DN_Connect (connect request notification) from + * the device through the WUSB host controller; the USB stack doesn't + * create the device until we authenticate it. FIXME: this will + * change. + * + * @bos: This is allocated when the BOS descriptors are read from + * the device and freed upon the wusb_dev struct dying. + * @wusb_cap_descr: points into @bos, and has been verified to be size + * safe. + */ +struct wusb_dev { + struct kref refcnt; + struct wusbhc *wusbhc; + struct list_head cack_node; /* Connect-Ack list */ + u8 port_idx; + u8 addr; + u8 beacon_type:4; + struct usb_encryption_descriptor ccm1_etd; + struct wusb_ckhdid cdid; + unsigned long entry_ts; + struct usb_bos_descriptor *bos; + struct usb_wireless_cap_descriptor *wusb_cap_descr; + struct uwb_mas_bm availability; + struct work_struct devconnect_acked_work; + struct urb *set_gtk_urb; + struct usb_ctrlrequest *set_gtk_req; + struct usb_device *usb_dev; +}; + +#define WUSB_DEV_ADDR_UNAUTH 0x80 + +static inline void wusb_dev_init(struct wusb_dev *wusb_dev) +{ + kref_init(&wusb_dev->refcnt); + /* no need to init the cack_node */ +} + +extern void wusb_dev_destroy(struct kref *_wusb_dev); + +static inline struct wusb_dev *wusb_dev_get(struct wusb_dev *wusb_dev) +{ + kref_get(&wusb_dev->refcnt); + return wusb_dev; +} + +static inline void wusb_dev_put(struct wusb_dev *wusb_dev) +{ + kref_put(&wusb_dev->refcnt, wusb_dev_destroy); +} + +/** + * Wireless USB Host Controlller root hub "fake" ports + * (state and device information) + * + * Wireless USB is wireless, so there are no ports; but we + * fake'em. Each RC can connect a max of devices at the same time + * (given in the Wireless Adapter descriptor, bNumPorts or WHCI's + * caps), referred to in wusbhc->ports_max. + * + * See rh.c for more information. + * + * The @status and @change use the same bits as in USB2.0[11.24.2.7], + * so we don't have to do much when getting the port's status. + * + * WUSB1.0[7.1], USB2.0[11.24.2.7.1,fig 11-10], + * include/linux/usb_ch9.h (#define USB_PORT_STAT_*) + */ +struct wusb_port { + u16 status; + u16 change; + struct wusb_dev *wusb_dev; /* connected device's info */ + unsigned reset_count; + u32 ptk_tkid; +}; + +/** + * WUSB Host Controller specifics + * + * All fields that are common to all Wireless USB controller types + * (HWA and WHCI) are grouped here. Host Controller + * functions/operations that only deal with general Wireless USB HC + * issues use this data type to refer to the host. + * + * @usb_hcd Instantiation of a USB host controller + * (initialized by upper layer [HWA=HC or WHCI]. + * + * @dev Device that implements this; initialized by the + * upper layer (HWA-HC, WHCI...); this device should + * have a refcount. + * + * @trust_timeout After this time without hearing for device + * activity, we consider the device gone and we have to + * re-authenticate. + * + * Can be accessed w/o locking--however, read to a + * local variable then use. + * + * @chid WUSB Cluster Host ID: this is supposed to be a + * unique value that doesn't change across reboots (so + * that your devices do not require re-association). + * + * Read/Write protected by @mutex + * + * @dev_info This array has ports_max elements. It is used to + * give the HC information about the WUSB devices (see + * 'struct wusb_dev_info'). + * + * For HWA we need to allocate it in heap; for WHCI it + * needs to be permanently mapped, so we keep it for + * both and make it easy. Call wusbhc->dev_info_set() + * to update an entry. + * + * @ports_max Number of simultaneous device connections (fake + * ports) this HC will take. Read-only. + * + * @port Array of port status for each fake root port. Guaranteed to + * always be the same lenght during device existence + * [this allows for some unlocked but referenced reading]. + * + * @mmcies_max Max number of Information Elements this HC can send + * in its MMC. Read-only. + * + * @mmcie_add HC specific operation (WHCI or HWA) for adding an + * MMCIE. + * + * @mmcie_rm HC specific operation (WHCI or HWA) for removing an + * MMCIE. + * + * @enc_types Array which describes the encryptions methods + * supported by the host as described in WUSB1.0 -- + * one entry per supported method. As of WUSB1.0 there + * is only four methods, we make space for eight just in + * case they decide to add some more (and pray they do + * it in sequential order). if 'enc_types[enc_method] + * != 0', then it is supported by the host. enc_method + * is USB_ENC_TYPE*. + * + * @set_ptk: Set the PTK and enable encryption for a device. Or, if + * the supplied key is NULL, disable encryption for that + * device. + * + * @set_gtk: Set the GTK to be used for all future broadcast packets + * (i.e., MMCs). With some hardware, setting the GTK may start + * MMC transmission. + * + * NOTE: + * + * - If wusb_dev->usb_dev is not NULL, then usb_dev is valid + * (wusb_dev has a refcount on it). Likewise, if usb_dev->wusb_dev + * is not NULL, usb_dev->wusb_dev is valid (usb_dev keeps a + * refcount on it). + * + * Most of the times when you need to use it, it will be non-NULL, + * so there is no real need to check for it (wusb_dev will + * dissapear before usb_dev). + * + * - The following fields need to be filled out before calling + * wusbhc_create(): ports_max, mmcies_max, mmcie_{add,rm}. + * + * - there is no wusbhc_init() method, we do everything in + * wusbhc_create(). + * + * - Creation is done in two phases, wusbhc_create() and + * wusbhc_create_b(); b are the parts that need to be called after + * calling usb_hcd_add(&wusbhc->usb_hcd). + */ +struct wusbhc { + struct usb_hcd usb_hcd; /* HAS TO BE 1st */ + struct device *dev; + struct uwb_rc *uwb_rc; + struct uwb_pal pal; + + unsigned trust_timeout; /* in jiffies */ + struct wuie_host_info *wuie_host_info; /* Includes CHID */ + + struct mutex mutex; /* locks everything else */ + u16 cluster_id; /* Wireless USB Cluster ID */ + struct wusb_port *port; /* Fake port status handling */ + struct wusb_dev_info *dev_info; /* for Set Device Info mgmt */ + u8 ports_max; + unsigned active:1; /* currently xmit'ing MMCs */ + struct wuie_keep_alive keep_alive_ie; /* protected by mutex */ + struct delayed_work keep_alive_timer; + struct list_head cack_list; /* Connect acknowledging */ + size_t cack_count; /* protected by 'mutex' */ + struct wuie_connect_ack cack_ie; + struct uwb_rsv *rsv; /* cluster bandwidth reservation */ + + struct mutex mmcie_mutex; /* MMC WUIE handling */ + struct wuie_hdr **mmcie; /* WUIE array */ + u8 mmcies_max; + /* FIXME: make wusbhc_ops? */ + int (*start)(struct wusbhc *wusbhc); + void (*stop)(struct wusbhc *wusbhc); + int (*mmcie_add)(struct wusbhc *wusbhc, u8 interval, u8 repeat_cnt, + u8 handle, struct wuie_hdr *wuie); + int (*mmcie_rm)(struct wusbhc *wusbhc, u8 handle); + int (*dev_info_set)(struct wusbhc *, struct wusb_dev *wusb_dev); + int (*bwa_set)(struct wusbhc *wusbhc, s8 stream_index, + const struct uwb_mas_bm *); + int (*set_ptk)(struct wusbhc *wusbhc, u8 port_idx, + u32 tkid, const void *key, size_t key_size); + int (*set_gtk)(struct wusbhc *wusbhc, + u32 tkid, const void *key, size_t key_size); + int (*set_num_dnts)(struct wusbhc *wusbhc, u8 interval, u8 slots); + + struct { + struct usb_key_descriptor descr; + u8 data[16]; /* GTK key data */ + } __attribute__((packed)) gtk; + u8 gtk_index; + u32 gtk_tkid; + struct work_struct gtk_rekey_done_work; + int pending_set_gtks; + + struct usb_encryption_descriptor *ccm1_etd; +}; + +#define usb_hcd_to_wusbhc(u) container_of((u), struct wusbhc, usb_hcd) + + +extern int wusbhc_create(struct wusbhc *); +extern int wusbhc_b_create(struct wusbhc *); +extern void wusbhc_b_destroy(struct wusbhc *); +extern void wusbhc_destroy(struct wusbhc *); +extern int wusb_dev_sysfs_add(struct wusbhc *, struct usb_device *, + struct wusb_dev *); +extern void wusb_dev_sysfs_rm(struct wusb_dev *); +extern int wusbhc_sec_create(struct wusbhc *); +extern int wusbhc_sec_start(struct wusbhc *); +extern void wusbhc_sec_stop(struct wusbhc *); +extern void wusbhc_sec_destroy(struct wusbhc *); +extern void wusbhc_giveback_urb(struct wusbhc *wusbhc, struct urb *urb, + int status); +void wusbhc_reset_all(struct wusbhc *wusbhc); + +int wusbhc_pal_register(struct wusbhc *wusbhc); +void wusbhc_pal_unregister(struct wusbhc *wusbhc); + +/* + * Return @usb_dev's @usb_hcd (properly referenced) or NULL if gone + * + * @usb_dev: USB device, UNLOCKED and referenced (or otherwise, safe ptr) + * + * This is a safe assumption as @usb_dev->bus is referenced all the + * time during the @usb_dev life cycle. + */ +static inline struct usb_hcd *usb_hcd_get_by_usb_dev(struct usb_device *usb_dev) +{ + struct usb_hcd *usb_hcd; + usb_hcd = container_of(usb_dev->bus, struct usb_hcd, self); + return usb_get_hcd(usb_hcd); +} + +/* + * Increment the reference count on a wusbhc. + * + * @wusbhc's life cycle is identical to that of the underlying usb_hcd. + */ +static inline struct wusbhc *wusbhc_get(struct wusbhc *wusbhc) +{ + return usb_get_hcd(&wusbhc->usb_hcd) ? wusbhc : NULL; +} + +/* + * Return the wusbhc associated to a @usb_dev + * + * @usb_dev: USB device, UNLOCKED and referenced (or otherwise, safe ptr) + * + * @returns: wusbhc for @usb_dev; NULL if the @usb_dev is being torn down. + * WARNING: referenced at the usb_hcd level, unlocked + * + * FIXME: move offline + */ +static inline struct wusbhc *wusbhc_get_by_usb_dev(struct usb_device *usb_dev) +{ + struct wusbhc *wusbhc = NULL; + struct usb_hcd *usb_hcd; + if (usb_dev->devnum > 1 && !usb_dev->wusb) { + /* but root hubs */ + dev_err(&usb_dev->dev, "devnum %d wusb %d\n", usb_dev->devnum, + usb_dev->wusb); + BUG_ON(usb_dev->devnum > 1 && !usb_dev->wusb); + } + usb_hcd = usb_hcd_get_by_usb_dev(usb_dev); + if (usb_hcd == NULL) + return NULL; + BUG_ON(usb_hcd->wireless == 0); + return wusbhc = usb_hcd_to_wusbhc(usb_hcd); +} + + +static inline void wusbhc_put(struct wusbhc *wusbhc) +{ + usb_put_hcd(&wusbhc->usb_hcd); +} + +int wusbhc_start(struct wusbhc *wusbhc, const struct wusb_ckhdid *chid); +void wusbhc_stop(struct wusbhc *wusbhc); +extern int wusbhc_chid_set(struct wusbhc *, const struct wusb_ckhdid *); + +/* Device connect handling */ +extern int wusbhc_devconnect_create(struct wusbhc *); +extern void wusbhc_devconnect_destroy(struct wusbhc *); +extern int wusbhc_devconnect_start(struct wusbhc *wusbhc, + const struct wusb_ckhdid *chid); +extern void wusbhc_devconnect_stop(struct wusbhc *wusbhc); +extern int wusbhc_devconnect_auth(struct wusbhc *, u8); +extern void wusbhc_handle_dn(struct wusbhc *, u8 srcaddr, + struct wusb_dn_hdr *dn_hdr, size_t size); +extern int wusbhc_dev_reset(struct wusbhc *wusbhc, u8 port); +extern void __wusbhc_dev_disable(struct wusbhc *wusbhc, u8 port); +extern int wusb_usb_ncb(struct notifier_block *nb, unsigned long val, + void *priv); +extern int wusb_set_dev_addr(struct wusbhc *wusbhc, struct wusb_dev *wusb_dev, + u8 addr); + +/* Wireless USB fake Root Hub methods */ +extern int wusbhc_rh_create(struct wusbhc *); +extern void wusbhc_rh_destroy(struct wusbhc *); + +extern int wusbhc_rh_status_data(struct usb_hcd *, char *); +extern int wusbhc_rh_control(struct usb_hcd *, u16, u16, u16, char *, u16); +extern int wusbhc_rh_suspend(struct usb_hcd *); +extern int wusbhc_rh_resume(struct usb_hcd *); +extern int wusbhc_rh_start_port_reset(struct usb_hcd *, unsigned); + +/* MMC handling */ +extern int wusbhc_mmcie_create(struct wusbhc *); +extern void wusbhc_mmcie_destroy(struct wusbhc *); +extern int wusbhc_mmcie_set(struct wusbhc *, u8 interval, u8 repeat_cnt, + struct wuie_hdr *); +extern void wusbhc_mmcie_rm(struct wusbhc *, struct wuie_hdr *); + +/* Bandwidth reservation */ +int wusbhc_rsv_establish(struct wusbhc *wusbhc); +void wusbhc_rsv_terminate(struct wusbhc *wusbhc); + +/* + * I've always said + * I wanted a wedding in a church... + * + * but lately I've been thinking about + * the Botanical Gardens. + * + * We could do it by the tulips. + * It'll be beautiful + * + * --Security! + */ +extern int wusb_dev_sec_add(struct wusbhc *, struct usb_device *, + struct wusb_dev *); +extern void wusb_dev_sec_rm(struct wusb_dev *) ; +extern int wusb_dev_4way_handshake(struct wusbhc *, struct wusb_dev *, + struct wusb_ckhdid *ck); +void wusbhc_gtk_rekey(struct wusbhc *wusbhc); + + +/* WUSB Cluster ID handling */ +extern u8 wusb_cluster_id_get(void); +extern void wusb_cluster_id_put(u8); + +/* + * wusb_port_by_idx - return the port associated to a zero-based port index + * + * NOTE: valid without locking as long as wusbhc is referenced (as the + * number of ports doesn't change). The data pointed to has to + * be verified though :) + */ +static inline struct wusb_port *wusb_port_by_idx(struct wusbhc *wusbhc, + u8 port_idx) +{ + return &wusbhc->port[port_idx]; +} + +/* + * wusb_port_no_to_idx - Convert port number (per usb_dev->portnum) to + * a port_idx. + * + * USB stack USB ports are 1 based!! + * + * NOTE: only valid for WUSB devices!!! + */ +static inline u8 wusb_port_no_to_idx(u8 port_no) +{ + return port_no - 1; +} + +extern struct wusb_dev *__wusb_dev_get_by_usb_dev(struct wusbhc *, + struct usb_device *); + +/* + * Return a referenced wusb_dev given a @usb_dev + * + * Returns NULL if the usb_dev is being torn down. + * + * FIXME: move offline + */ +static inline +struct wusb_dev *wusb_dev_get_by_usb_dev(struct usb_device *usb_dev) +{ + struct wusbhc *wusbhc; + struct wusb_dev *wusb_dev; + wusbhc = wusbhc_get_by_usb_dev(usb_dev); + if (wusbhc == NULL) + return NULL; + mutex_lock(&wusbhc->mutex); + wusb_dev = __wusb_dev_get_by_usb_dev(wusbhc, usb_dev); + mutex_unlock(&wusbhc->mutex); + wusbhc_put(wusbhc); + return wusb_dev; +} + +/* Misc */ + +extern struct workqueue_struct *wusbd; +#endif /* #ifndef __WUSBHC_H__ */ diff --git a/drivers/uwb/Kconfig b/drivers/uwb/Kconfig new file mode 100644 index 000000000000..ca783127af36 --- /dev/null +++ b/drivers/uwb/Kconfig @@ -0,0 +1,90 @@ +# +# UWB device configuration +# + +menuconfig UWB + tristate "Ultra Wideband devices (EXPERIMENTAL)" + depends on EXPERIMENTAL + depends on PCI + default n + help + UWB is a high-bandwidth, low-power, point-to-point radio + technology using a wide spectrum (3.1-10.6GHz). It is + optimized for in-room use (480Mbps at 2 meters, 110Mbps at + 10m). It serves as the transport layer for other protocols, + such as Wireless USB (WUSB), IP (WLP) and upcoming + Bluetooth and 1394 + + The topology is peer to peer; however, higher level + protocols (such as WUSB) might impose a master/slave + relationship. + + Say Y here if your computer has UWB radio controllers (USB or PCI) + based. You will need to enable the radio controllers + below. It is ok to select all of them, no harm done. + + For more help check the UWB and WUSB related files in + <file:Documentation/usb/>. + + To compile the UWB stack as a module, choose M here. + +if UWB + +config UWB_HWA + tristate "UWB Radio Control driver for WUSB-compliant USB dongles (HWA)" + depends on USB + help + This driver enables the radio controller for HWA USB + devices. HWA stands for Host Wire Adapter, and it is a UWB + Radio Controller connected to your system via USB. Most of + them come with a Wireless USB host controller also. + + To compile this driver select Y (built in) or M (module). It + is safe to select any even if you do not have the hardware. + +config UWB_WHCI + tristate "UWB Radio Control driver for WHCI-compliant cards" + depends on PCI + help + This driver enables the radio controller for WHCI cards. + + WHCI is an specification developed by Intel + (http://www.intel.com/technology/comms/wusb/whci.htm) much + in the spirit of USB's EHCI, but for UWB and Wireless USB + radio/host controllers connected via memmory mapping (eg: + PCI). Most of these cards come also with a Wireless USB host + controller. + + To compile this driver select Y (built in) or M (module). It + is safe to select any even if you do not have the hardware. + +config UWB_WLP + tristate "Support WiMedia Link Protocol (Ethernet/IP over UWB)" + depends on UWB && NET + help + This is a common library for drivers that implement + networking over UWB. + +config UWB_I1480U + tristate "Support for Intel Wireless UWB Link 1480 HWA" + depends on UWB_HWA + select FW_LOADER + help + This driver enables support for the i1480 when connected via + USB. It consists of a firmware uploader that will enable it + to behave as an HWA device. + + To compile this driver select Y (built in) or M (module). It + is safe to select any even if you do not have the hardware. + +config UWB_I1480U_WLP + tristate "Support for Intel Wireless UWB Link 1480 HWA's WLP interface" + depends on UWB_I1480U && UWB_WLP && NET + help + This driver enables WLP support for the i1480 when connected via + USB. WLP is the WiMedia Link Protocol, or IP over UWB. + + To compile this driver select Y (built in) or M (module). It + is safe to select any even if you don't have the hardware. + +endif # UWB diff --git a/drivers/uwb/Makefile b/drivers/uwb/Makefile new file mode 100644 index 000000000000..257e6908304c --- /dev/null +++ b/drivers/uwb/Makefile @@ -0,0 +1,29 @@ +obj-$(CONFIG_UWB) += uwb.o +obj-$(CONFIG_UWB_WLP) += wlp/ +obj-$(CONFIG_UWB_WHCI) += umc.o whci.o whc-rc.o +obj-$(CONFIG_UWB_HWA) += hwa-rc.o +obj-$(CONFIG_UWB_I1480U) += i1480/ + +uwb-objs := \ + address.o \ + beacon.o \ + driver.o \ + drp.o \ + drp-avail.o \ + drp-ie.o \ + est.o \ + ie.o \ + lc-dev.o \ + lc-rc.o \ + neh.o \ + pal.o \ + reset.o \ + rsv.o \ + scan.o \ + uwb-debug.o \ + uwbd.o + +umc-objs := \ + umc-bus.o \ + umc-dev.o \ + umc-drv.o diff --git a/drivers/uwb/address.c b/drivers/uwb/address.c new file mode 100644 index 000000000000..1664ae5f1706 --- /dev/null +++ b/drivers/uwb/address.c @@ -0,0 +1,374 @@ +/* + * Ultra Wide Band + * Address management + * + * Copyright (C) 2005-2006 Intel Corporation + * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + * + * + * FIXME: docs + */ + +#include <linux/errno.h> +#include <linux/module.h> +#include <linux/device.h> +#include <linux/random.h> +#include <linux/etherdevice.h> +#include <linux/uwb/debug.h> +#include "uwb-internal.h" + + +/** Device Address Management command */ +struct uwb_rc_cmd_dev_addr_mgmt { + struct uwb_rccb rccb; + u8 bmOperationType; + u8 baAddr[6]; +} __attribute__((packed)); + + +/** + * Low level command for setting/getting UWB radio's addresses + * + * @hwarc: HWA Radio Control interface instance + * @bmOperationType: + * Set/get, MAC/DEV (see WUSB1.0[8.6.2.2]) + * @baAddr: address buffer--assumed to have enough data to hold + * the address type requested. + * @reply: Pointer to reply buffer (can be stack allocated) + * @returns: 0 if ok, < 0 errno code on error. + * + * @cmd has to be allocated because USB cannot grok USB or vmalloc + * buffers depending on your combination of host architecture. + */ +static +int uwb_rc_dev_addr_mgmt(struct uwb_rc *rc, + u8 bmOperationType, const u8 *baAddr, + struct uwb_rc_evt_dev_addr_mgmt *reply) +{ + int result; + struct uwb_rc_cmd_dev_addr_mgmt *cmd; + + result = -ENOMEM; + cmd = kzalloc(sizeof(*cmd), GFP_KERNEL); + if (cmd == NULL) + goto error_kzalloc; + cmd->rccb.bCommandType = UWB_RC_CET_GENERAL; + cmd->rccb.wCommand = cpu_to_le16(UWB_RC_CMD_DEV_ADDR_MGMT); + cmd->bmOperationType = bmOperationType; + if (baAddr) { + size_t size = 0; + switch (bmOperationType >> 1) { + case 0: size = 2; break; + case 1: size = 6; break; + default: BUG(); + } + memcpy(cmd->baAddr, baAddr, size); + } + reply->rceb.bEventType = UWB_RC_CET_GENERAL; + reply->rceb.wEvent = UWB_RC_CMD_DEV_ADDR_MGMT; + result = uwb_rc_cmd(rc, "DEV-ADDR-MGMT", + &cmd->rccb, sizeof(*cmd), + &reply->rceb, sizeof(*reply)); + if (result < 0) + goto error_cmd; + if (result < sizeof(*reply)) { + dev_err(&rc->uwb_dev.dev, + "DEV-ADDR-MGMT: not enough data replied: " + "%d vs %zu bytes needed\n", result, sizeof(*reply)); + result = -ENOMSG; + } else if (reply->bResultCode != UWB_RC_RES_SUCCESS) { + dev_err(&rc->uwb_dev.dev, + "DEV-ADDR-MGMT: command execution failed: %s (%d)\n", + uwb_rc_strerror(reply->bResultCode), + reply->bResultCode); + result = -EIO; + } else + result = 0; +error_cmd: + kfree(cmd); +error_kzalloc: + return result; +} + + +/** + * Set the UWB RC MAC or device address. + * + * @rc: UWB Radio Controller + * @_addr: Pointer to address to write [assumed to be either a + * 'struct uwb_mac_addr *' or a 'struct uwb_dev_addr *']. + * @type: Type of address to set (UWB_ADDR_DEV or UWB_ADDR_MAC). + * @returns: 0 if ok, < 0 errno code on error. + * + * Some anal retentivity here: even if both 'struct + * uwb_{dev,mac}_addr' have the actual byte array in the same offset + * and I could just pass _addr to hwarc_cmd_dev_addr_mgmt(), I prefer + * to use some syntatic sugar in case someday we decide to change the + * format of the structs. The compiler will optimize it out anyway. + */ +static int uwb_rc_addr_set(struct uwb_rc *rc, + const void *_addr, enum uwb_addr_type type) +{ + int result; + u8 bmOperationType = 0x1; /* Set address */ + const struct uwb_dev_addr *dev_addr = _addr; + const struct uwb_mac_addr *mac_addr = _addr; + struct uwb_rc_evt_dev_addr_mgmt reply; + const u8 *baAddr; + + result = -EINVAL; + switch (type) { + case UWB_ADDR_DEV: + baAddr = dev_addr->data; + break; + case UWB_ADDR_MAC: + baAddr = mac_addr->data; + bmOperationType |= 0x2; + break; + default: + return result; + } + return uwb_rc_dev_addr_mgmt(rc, bmOperationType, baAddr, &reply); +} + + +/** + * Get the UWB radio's MAC or device address. + * + * @rc: UWB Radio Controller + * @_addr: Where to write the address data [assumed to be either a + * 'struct uwb_mac_addr *' or a 'struct uwb_dev_addr *']. + * @type: Type of address to get (UWB_ADDR_DEV or UWB_ADDR_MAC). + * @returns: 0 if ok (and *_addr set), < 0 errno code on error. + * + * See comment in uwb_rc_addr_set() about anal retentivity in the + * type handling of the address variables. + */ +static int uwb_rc_addr_get(struct uwb_rc *rc, + void *_addr, enum uwb_addr_type type) +{ + int result; + u8 bmOperationType = 0x0; /* Get address */ + struct uwb_rc_evt_dev_addr_mgmt evt; + struct uwb_dev_addr *dev_addr = _addr; + struct uwb_mac_addr *mac_addr = _addr; + u8 *baAddr; + + result = -EINVAL; + switch (type) { + case UWB_ADDR_DEV: + baAddr = dev_addr->data; + break; + case UWB_ADDR_MAC: + bmOperationType |= 0x2; + baAddr = mac_addr->data; + break; + default: + return result; + } + result = uwb_rc_dev_addr_mgmt(rc, bmOperationType, baAddr, &evt); + if (result == 0) + switch (type) { + case UWB_ADDR_DEV: + memcpy(&dev_addr->data, evt.baAddr, + sizeof(dev_addr->data)); + break; + case UWB_ADDR_MAC: + memcpy(&mac_addr->data, evt.baAddr, + sizeof(mac_addr->data)); + break; + default: /* shut gcc up */ + BUG(); + } + return result; +} + + +/** Get @rc's MAC address to @addr */ +int uwb_rc_mac_addr_get(struct uwb_rc *rc, + struct uwb_mac_addr *addr) { + return uwb_rc_addr_get(rc, addr, UWB_ADDR_MAC); +} +EXPORT_SYMBOL_GPL(uwb_rc_mac_addr_get); + + +/** Get @rc's device address to @addr */ +int uwb_rc_dev_addr_get(struct uwb_rc *rc, + struct uwb_dev_addr *addr) { + return uwb_rc_addr_get(rc, addr, UWB_ADDR_DEV); +} +EXPORT_SYMBOL_GPL(uwb_rc_dev_addr_get); + + +/** Set @rc's address to @addr */ +int uwb_rc_mac_addr_set(struct uwb_rc *rc, + const struct uwb_mac_addr *addr) +{ + int result = -EINVAL; + mutex_lock(&rc->uwb_dev.mutex); + result = uwb_rc_addr_set(rc, addr, UWB_ADDR_MAC); + mutex_unlock(&rc->uwb_dev.mutex); + return result; +} + + +/** Set @rc's address to @addr */ +int uwb_rc_dev_addr_set(struct uwb_rc *rc, + const struct uwb_dev_addr *addr) +{ + int result = -EINVAL; + mutex_lock(&rc->uwb_dev.mutex); + result = uwb_rc_addr_set(rc, addr, UWB_ADDR_DEV); + rc->uwb_dev.dev_addr = *addr; + mutex_unlock(&rc->uwb_dev.mutex); + return result; +} + +/* Returns !0 if given address is already assigned to device. */ +int __uwb_mac_addr_assigned_check(struct device *dev, void *_addr) +{ + struct uwb_dev *uwb_dev = to_uwb_dev(dev); + struct uwb_mac_addr *addr = _addr; + + if (!uwb_mac_addr_cmp(addr, &uwb_dev->mac_addr)) + return !0; + return 0; +} + +/* Returns !0 if given address is already assigned to device. */ +int __uwb_dev_addr_assigned_check(struct device *dev, void *_addr) +{ + struct uwb_dev *uwb_dev = to_uwb_dev(dev); + struct uwb_dev_addr *addr = _addr; + if (!uwb_dev_addr_cmp(addr, &uwb_dev->dev_addr)) + return !0; + return 0; +} + +/** + * uwb_dev_addr_assign - assigned a generated DevAddr to a radio controller + * @rc: the (local) radio controller device requiring a new DevAddr + * + * A new DevAddr is required when: + * - first setting up a radio controller + * - if the hardware reports a DevAddr conflict + * + * The DevAddr is randomly generated in the generated DevAddr range + * [0x100, 0xfeff]. The number of devices in a beacon group is limited + * by mMaxBPLength (96) so this address space will never be exhausted. + * + * [ECMA-368] 17.1.1, 17.16. + */ +int uwb_rc_dev_addr_assign(struct uwb_rc *rc) +{ + struct uwb_dev_addr new_addr; + + do { + get_random_bytes(new_addr.data, sizeof(new_addr.data)); + } while (new_addr.data[0] == 0x00 || new_addr.data[0] == 0xff + || __uwb_dev_addr_assigned(rc, &new_addr)); + + return uwb_rc_dev_addr_set(rc, &new_addr); +} + +/** + * uwbd_evt_handle_rc_dev_addr_conflict - handle a DEV_ADDR_CONFLICT event + * @evt: the DEV_ADDR_CONFLICT notification from the radio controller + * + * A new (non-conflicting) DevAddr is assigned to the radio controller. + * + * [ECMA-368] 17.1.1.1. + */ +int uwbd_evt_handle_rc_dev_addr_conflict(struct uwb_event *evt) +{ + struct uwb_rc *rc = evt->rc; + + return uwb_rc_dev_addr_assign(rc); +} + +/* + * Print the 48-bit EUI MAC address of the radio controller when + * reading /sys/class/uwb_rc/XX/mac_address + */ +static ssize_t uwb_rc_mac_addr_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct uwb_dev *uwb_dev = to_uwb_dev(dev); + struct uwb_rc *rc = uwb_dev->rc; + struct uwb_mac_addr addr; + ssize_t result; + + mutex_lock(&rc->uwb_dev.mutex); + result = uwb_rc_addr_get(rc, &addr, UWB_ADDR_MAC); + mutex_unlock(&rc->uwb_dev.mutex); + if (result >= 0) { + result = uwb_mac_addr_print(buf, UWB_ADDR_STRSIZE, &addr); + buf[result++] = '\n'; + } + return result; +} + +/* + * Parse a 48 bit address written to /sys/class/uwb_rc/XX/mac_address + * and if correct, set it. + */ +static ssize_t uwb_rc_mac_addr_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t size) +{ + struct uwb_dev *uwb_dev = to_uwb_dev(dev); + struct uwb_rc *rc = uwb_dev->rc; + struct uwb_mac_addr addr; + ssize_t result; + + result = sscanf(buf, "%hhx:%hhx:%hhx:%hhx:%hhx:%hhx\n", + &addr.data[0], &addr.data[1], &addr.data[2], + &addr.data[3], &addr.data[4], &addr.data[5]); + if (result != 6) { + result = -EINVAL; + goto out; + } + if (is_multicast_ether_addr(addr.data)) { + dev_err(&rc->uwb_dev.dev, "refusing to set multicast " + "MAC address %s\n", buf); + result = -EINVAL; + goto out; + } + result = uwb_rc_mac_addr_set(rc, &addr); + if (result == 0) + rc->uwb_dev.mac_addr = addr; +out: + return result < 0 ? result : size; +} +DEVICE_ATTR(mac_address, S_IRUGO | S_IWUSR, uwb_rc_mac_addr_show, uwb_rc_mac_addr_store); + +/** Print @addr to @buf, @return bytes written */ +size_t __uwb_addr_print(char *buf, size_t buf_size, const unsigned char *addr, + int type) +{ + size_t result; + if (type) + result = scnprintf(buf, buf_size, + "%02x:%02x:%02x:%02x:%02x:%02x", + addr[0], addr[1], addr[2], + addr[3], addr[4], addr[5]); + else + result = scnprintf(buf, buf_size, "%02x:%02x", + addr[1], addr[0]); + return result; +} +EXPORT_SYMBOL_GPL(__uwb_addr_print); diff --git a/drivers/uwb/beacon.c b/drivers/uwb/beacon.c new file mode 100644 index 000000000000..46b18eec5026 --- /dev/null +++ b/drivers/uwb/beacon.c @@ -0,0 +1,642 @@ +/* + * Ultra Wide Band + * Beacon management + * + * Copyright (C) 2005-2006 Intel Corporation + * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + * + * + * FIXME: docs + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/device.h> +#include <linux/err.h> +#include <linux/kdev_t.h> +#include "uwb-internal.h" + +#define D_LOCAL 0 +#include <linux/uwb/debug.h> + +/** Start Beaconing command structure */ +struct uwb_rc_cmd_start_beacon { + struct uwb_rccb rccb; + __le16 wBPSTOffset; + u8 bChannelNumber; +} __attribute__((packed)); + + +static int uwb_rc_start_beacon(struct uwb_rc *rc, u16 bpst_offset, u8 channel) +{ + int result; + struct uwb_rc_cmd_start_beacon *cmd; + struct uwb_rc_evt_confirm reply; + + cmd = kzalloc(sizeof(*cmd), GFP_KERNEL); + if (cmd == NULL) + return -ENOMEM; + cmd->rccb.bCommandType = UWB_RC_CET_GENERAL; + cmd->rccb.wCommand = cpu_to_le16(UWB_RC_CMD_START_BEACON); + cmd->wBPSTOffset = cpu_to_le16(bpst_offset); + cmd->bChannelNumber = channel; + reply.rceb.bEventType = UWB_RC_CET_GENERAL; + reply.rceb.wEvent = UWB_RC_CMD_START_BEACON; + result = uwb_rc_cmd(rc, "START-BEACON", &cmd->rccb, sizeof(*cmd), + &reply.rceb, sizeof(reply)); + if (result < 0) + goto error_cmd; + if (reply.bResultCode != UWB_RC_RES_SUCCESS) { + dev_err(&rc->uwb_dev.dev, + "START-BEACON: command execution failed: %s (%d)\n", + uwb_rc_strerror(reply.bResultCode), reply.bResultCode); + result = -EIO; + } +error_cmd: + kfree(cmd); + return result; +} + +static int uwb_rc_stop_beacon(struct uwb_rc *rc) +{ + int result; + struct uwb_rccb *cmd; + struct uwb_rc_evt_confirm reply; + + cmd = kzalloc(sizeof(*cmd), GFP_KERNEL); + if (cmd == NULL) + return -ENOMEM; + cmd->bCommandType = UWB_RC_CET_GENERAL; + cmd->wCommand = cpu_to_le16(UWB_RC_CMD_STOP_BEACON); + reply.rceb.bEventType = UWB_RC_CET_GENERAL; + reply.rceb.wEvent = UWB_RC_CMD_STOP_BEACON; + result = uwb_rc_cmd(rc, "STOP-BEACON", cmd, sizeof(*cmd), + &reply.rceb, sizeof(reply)); + if (result < 0) + goto error_cmd; + if (reply.bResultCode != UWB_RC_RES_SUCCESS) { + dev_err(&rc->uwb_dev.dev, + "STOP-BEACON: command execution failed: %s (%d)\n", + uwb_rc_strerror(reply.bResultCode), reply.bResultCode); + result = -EIO; + } +error_cmd: + kfree(cmd); + return result; +} + +/* + * Start/stop beacons + * + * @rc: UWB Radio Controller to operate on + * @channel: UWB channel on which to beacon (WUSB[table + * 5-12]). If -1, stop beaconing. + * @bpst_offset: Beacon Period Start Time offset; FIXME-do zero + * + * According to WHCI 0.95 [4.13.6] the driver will only receive the RCEB + * of a SET IE command after the device sent the first beacon that includes + * the IEs specified in the SET IE command. So, after we start beaconing we + * check if there is anything in the IE cache and call the SET IE command + * if needed. + */ +int uwb_rc_beacon(struct uwb_rc *rc, int channel, unsigned bpst_offset) +{ + int result; + struct device *dev = &rc->uwb_dev.dev; + + mutex_lock(&rc->uwb_dev.mutex); + if (channel < 0) + channel = -1; + if (channel == -1) + result = uwb_rc_stop_beacon(rc); + else { + /* channel >= 0...dah */ + result = uwb_rc_start_beacon(rc, bpst_offset, channel); + if (result < 0) + goto out_up; + if (le16_to_cpu(rc->ies->wIELength) > 0) { + result = uwb_rc_set_ie(rc, rc->ies); + if (result < 0) { + dev_err(dev, "Cannot set new IE on device: " + "%d\n", result); + result = uwb_rc_stop_beacon(rc); + channel = -1; + bpst_offset = 0; + } else + result = 0; + } + } + + if (result < 0) + goto out_up; + rc->beaconing = channel; + + uwb_notify(rc, NULL, uwb_bg_joined(rc) ? UWB_NOTIF_BG_JOIN : UWB_NOTIF_BG_LEAVE); + +out_up: + mutex_unlock(&rc->uwb_dev.mutex); + return result; +} + +/* + * Beacon cache + * + * The purpose of this is to speed up the lookup of becon information + * when a new beacon arrives. The UWB Daemon uses it also to keep a + * tab of which devices are in radio distance and which not. When a + * device's beacon stays present for more than a certain amount of + * time, it is considered a new, usable device. When a beacon ceases + * to be received for a certain amount of time, it is considered that + * the device is gone. + * + * FIXME: use an allocator for the entries + * FIXME: use something faster for search than a list + */ + +struct uwb_beca uwb_beca = { + .list = LIST_HEAD_INIT(uwb_beca.list), + .mutex = __MUTEX_INITIALIZER(uwb_beca.mutex) +}; + + +void uwb_bce_kfree(struct kref *_bce) +{ + struct uwb_beca_e *bce = container_of(_bce, struct uwb_beca_e, refcnt); + + kfree(bce->be); + kfree(bce); +} + + +/* Find a beacon by dev addr in the cache */ +static +struct uwb_beca_e *__uwb_beca_find_bydev(const struct uwb_dev_addr *dev_addr) +{ + struct uwb_beca_e *bce, *next; + list_for_each_entry_safe(bce, next, &uwb_beca.list, node) { + d_printf(6, NULL, "looking for addr %02x:%02x in %02x:%02x\n", + dev_addr->data[0], dev_addr->data[1], + bce->dev_addr.data[0], bce->dev_addr.data[1]); + if (!memcmp(&bce->dev_addr, dev_addr, sizeof(bce->dev_addr))) + goto out; + } + bce = NULL; +out: + return bce; +} + +/* Find a beacon by dev addr in the cache */ +static +struct uwb_beca_e *__uwb_beca_find_bymac(const struct uwb_mac_addr *mac_addr) +{ + struct uwb_beca_e *bce, *next; + list_for_each_entry_safe(bce, next, &uwb_beca.list, node) { + if (!memcmp(bce->mac_addr, mac_addr->data, + sizeof(struct uwb_mac_addr))) + goto out; + } + bce = NULL; +out: + return bce; +} + +/** + * uwb_dev_get_by_devaddr - get a UWB device with a specific DevAddr + * @rc: the radio controller that saw the device + * @devaddr: DevAddr of the UWB device to find + * + * There may be more than one matching device (in the case of a + * DevAddr conflict), but only the first one is returned. + */ +struct uwb_dev *uwb_dev_get_by_devaddr(struct uwb_rc *rc, + const struct uwb_dev_addr *devaddr) +{ + struct uwb_dev *found = NULL; + struct uwb_beca_e *bce; + + mutex_lock(&uwb_beca.mutex); + bce = __uwb_beca_find_bydev(devaddr); + if (bce) + found = uwb_dev_try_get(rc, bce->uwb_dev); + mutex_unlock(&uwb_beca.mutex); + + return found; +} + +/** + * uwb_dev_get_by_macaddr - get a UWB device with a specific EUI-48 + * @rc: the radio controller that saw the device + * @devaddr: EUI-48 of the UWB device to find + */ +struct uwb_dev *uwb_dev_get_by_macaddr(struct uwb_rc *rc, + const struct uwb_mac_addr *macaddr) +{ + struct uwb_dev *found = NULL; + struct uwb_beca_e *bce; + + mutex_lock(&uwb_beca.mutex); + bce = __uwb_beca_find_bymac(macaddr); + if (bce) + found = uwb_dev_try_get(rc, bce->uwb_dev); + mutex_unlock(&uwb_beca.mutex); + + return found; +} + +/* Initialize a beacon cache entry */ +static void uwb_beca_e_init(struct uwb_beca_e *bce) +{ + mutex_init(&bce->mutex); + kref_init(&bce->refcnt); + stats_init(&bce->lqe_stats); + stats_init(&bce->rssi_stats); +} + +/* + * Add a beacon to the cache + * + * @be: Beacon event information + * @bf: Beacon frame (part of b, really) + * @ts_jiffies: Timestamp (in jiffies) when the beacon was received + */ +struct uwb_beca_e *__uwb_beca_add(struct uwb_rc_evt_beacon *be, + struct uwb_beacon_frame *bf, + unsigned long ts_jiffies) +{ + struct uwb_beca_e *bce; + + bce = kzalloc(sizeof(*bce), GFP_KERNEL); + if (bce == NULL) + return NULL; + uwb_beca_e_init(bce); + bce->ts_jiffies = ts_jiffies; + bce->uwb_dev = NULL; + list_add(&bce->node, &uwb_beca.list); + return bce; +} + +/* + * Wipe out beacon entries that became stale + * + * Remove associated devicest too. + */ +void uwb_beca_purge(void) +{ + struct uwb_beca_e *bce, *next; + unsigned long expires; + + mutex_lock(&uwb_beca.mutex); + list_for_each_entry_safe(bce, next, &uwb_beca.list, node) { + expires = bce->ts_jiffies + msecs_to_jiffies(beacon_timeout_ms); + if (time_after(jiffies, expires)) { + uwbd_dev_offair(bce); + list_del(&bce->node); + uwb_bce_put(bce); + } + } + mutex_unlock(&uwb_beca.mutex); +} + +/* Clean up the whole beacon cache. Called on shutdown */ +void uwb_beca_release(void) +{ + struct uwb_beca_e *bce, *next; + mutex_lock(&uwb_beca.mutex); + list_for_each_entry_safe(bce, next, &uwb_beca.list, node) { + list_del(&bce->node); + uwb_bce_put(bce); + } + mutex_unlock(&uwb_beca.mutex); +} + +static void uwb_beacon_print(struct uwb_rc *rc, struct uwb_rc_evt_beacon *be, + struct uwb_beacon_frame *bf) +{ + char macbuf[UWB_ADDR_STRSIZE]; + char devbuf[UWB_ADDR_STRSIZE]; + char dstbuf[UWB_ADDR_STRSIZE]; + + uwb_mac_addr_print(macbuf, sizeof(macbuf), &bf->Device_Identifier); + uwb_dev_addr_print(devbuf, sizeof(devbuf), &bf->hdr.SrcAddr); + uwb_dev_addr_print(dstbuf, sizeof(dstbuf), &bf->hdr.DestAddr); + dev_info(&rc->uwb_dev.dev, + "BEACON from %s to %s (ch%u offset %u slot %u MAC %s)\n", + devbuf, dstbuf, be->bChannelNumber, be->wBPSTOffset, + bf->Beacon_Slot_Number, macbuf); +} + +/* + * @bce: beacon cache entry, referenced + */ +ssize_t uwb_bce_print_IEs(struct uwb_dev *uwb_dev, struct uwb_beca_e *bce, + char *buf, size_t size) +{ + ssize_t result = 0; + struct uwb_rc_evt_beacon *be; + struct uwb_beacon_frame *bf; + struct uwb_buf_ctx ctx = { + .buf = buf, + .bytes = 0, + .size = size + }; + + mutex_lock(&bce->mutex); + be = bce->be; + if (be == NULL) + goto out; + bf = (void *) be->BeaconInfo; + uwb_ie_for_each(uwb_dev, uwb_ie_dump_hex, &ctx, + bf->IEData, be->wBeaconInfoLength - sizeof(*bf)); + result = ctx.bytes; +out: + mutex_unlock(&bce->mutex); + return result; +} + +/* + * Verify that the beacon event, frame and IEs are ok + */ +static int uwb_verify_beacon(struct uwb_rc *rc, struct uwb_event *evt, + struct uwb_rc_evt_beacon *be) +{ + int result = -EINVAL; + struct uwb_beacon_frame *bf; + struct device *dev = &rc->uwb_dev.dev; + + /* Is there enough data to decode a beacon frame? */ + if (evt->notif.size < sizeof(*be) + sizeof(*bf)) { + dev_err(dev, "BEACON event: Not enough data to decode " + "(%zu vs %zu bytes needed)\n", evt->notif.size, + sizeof(*be) + sizeof(*bf)); + goto error; + } + /* FIXME: make sure beacon frame IEs are fine and that the whole thing + * is consistent */ + result = 0; +error: + return result; +} + +/* + * Handle UWB_RC_EVT_BEACON events + * + * We check the beacon cache to see how the received beacon fares. If + * is there already we refresh the timestamp. If not we create a new + * entry. + * + * According to the WHCI and WUSB specs, only one beacon frame is + * allowed per notification block, so we don't bother about scanning + * for more. + */ +int uwbd_evt_handle_rc_beacon(struct uwb_event *evt) +{ + int result = -EINVAL; + struct uwb_rc *rc; + struct uwb_rc_evt_beacon *be; + struct uwb_beacon_frame *bf; + struct uwb_beca_e *bce; + unsigned long last_ts; + + rc = evt->rc; + be = container_of(evt->notif.rceb, struct uwb_rc_evt_beacon, rceb); + result = uwb_verify_beacon(rc, evt, be); + if (result < 0) + return result; + + /* FIXME: handle alien beacons. */ + if (be->bBeaconType == UWB_RC_BEACON_TYPE_OL_ALIEN || + be->bBeaconType == UWB_RC_BEACON_TYPE_NOL_ALIEN) { + return -ENOSYS; + } + + bf = (struct uwb_beacon_frame *) be->BeaconInfo; + + /* + * Drop beacons from devices with a NULL EUI-48 -- they cannot + * be uniquely identified. + * + * It's expected that these will all be WUSB devices and they + * have a WUSB specific connection method so ignoring them + * here shouldn't be a problem. + */ + if (uwb_mac_addr_bcast(&bf->Device_Identifier)) + return 0; + + mutex_lock(&uwb_beca.mutex); + bce = __uwb_beca_find_bymac(&bf->Device_Identifier); + if (bce == NULL) { + /* Not in there, a new device is pinging */ + uwb_beacon_print(evt->rc, be, bf); + bce = __uwb_beca_add(be, bf, evt->ts_jiffies); + if (bce == NULL) { + mutex_unlock(&uwb_beca.mutex); + return -ENOMEM; + } + } + mutex_unlock(&uwb_beca.mutex); + + mutex_lock(&bce->mutex); + /* purge old beacon data */ + kfree(bce->be); + + last_ts = bce->ts_jiffies; + + /* Update commonly used fields */ + bce->ts_jiffies = evt->ts_jiffies; + bce->be = be; + bce->dev_addr = bf->hdr.SrcAddr; + bce->mac_addr = &bf->Device_Identifier; + be->wBPSTOffset = le16_to_cpu(be->wBPSTOffset); + be->wBeaconInfoLength = le16_to_cpu(be->wBeaconInfoLength); + stats_add_sample(&bce->lqe_stats, be->bLQI - 7); + stats_add_sample(&bce->rssi_stats, be->bRSSI + 18); + + /* + * This might be a beacon from a new device. + */ + if (bce->uwb_dev == NULL) + uwbd_dev_onair(evt->rc, bce); + + mutex_unlock(&bce->mutex); + + return 1; /* we keep the event data */ +} + +/* + * Handle UWB_RC_EVT_BEACON_SIZE events + * + * XXXXX + */ +int uwbd_evt_handle_rc_beacon_size(struct uwb_event *evt) +{ + int result = -EINVAL; + struct device *dev = &evt->rc->uwb_dev.dev; + struct uwb_rc_evt_beacon_size *bs; + + /* Is there enough data to decode the event? */ + if (evt->notif.size < sizeof(*bs)) { + dev_err(dev, "BEACON SIZE notification: Not enough data to " + "decode (%zu vs %zu bytes needed)\n", + evt->notif.size, sizeof(*bs)); + goto error; + } + bs = container_of(evt->notif.rceb, struct uwb_rc_evt_beacon_size, rceb); + if (0) + dev_info(dev, "Beacon size changed to %u bytes " + "(FIXME: action?)\n", le16_to_cpu(bs->wNewBeaconSize)); + else { + /* temporary hack until we do something with this message... */ + static unsigned count; + if (++count % 1000 == 0) + dev_info(dev, "Beacon size changed %u times " + "(FIXME: action?)\n", count); + } + result = 0; +error: + return result; +} + +/** + * uwbd_evt_handle_rc_bp_slot_change - handle a BP_SLOT_CHANGE event + * @evt: the BP_SLOT_CHANGE notification from the radio controller + * + * If the event indicates that no beacon period slots were available + * then radio controller has transitioned to a non-beaconing state. + * Otherwise, simply save the current beacon slot. + */ +int uwbd_evt_handle_rc_bp_slot_change(struct uwb_event *evt) +{ + struct uwb_rc *rc = evt->rc; + struct device *dev = &rc->uwb_dev.dev; + struct uwb_rc_evt_bp_slot_change *bpsc; + + if (evt->notif.size < sizeof(*bpsc)) { + dev_err(dev, "BP SLOT CHANGE event: Not enough data\n"); + return -EINVAL; + } + bpsc = container_of(evt->notif.rceb, struct uwb_rc_evt_bp_slot_change, rceb); + + mutex_lock(&rc->uwb_dev.mutex); + if (uwb_rc_evt_bp_slot_change_no_slot(bpsc)) { + dev_info(dev, "stopped beaconing: No free slots in BP\n"); + rc->beaconing = -1; + } else + rc->uwb_dev.beacon_slot = uwb_rc_evt_bp_slot_change_slot_num(bpsc); + mutex_unlock(&rc->uwb_dev.mutex); + + return 0; +} + +/** + * Handle UWB_RC_EVT_BPOIE_CHANGE events + * + * XXXXX + */ +struct uwb_ie_bpo { + struct uwb_ie_hdr hdr; + u8 bp_length; + u8 data[]; +} __attribute__((packed)); + +int uwbd_evt_handle_rc_bpoie_change(struct uwb_event *evt) +{ + int result = -EINVAL; + struct device *dev = &evt->rc->uwb_dev.dev; + struct uwb_rc_evt_bpoie_change *bpoiec; + struct uwb_ie_bpo *bpoie; + static unsigned count; /* FIXME: this is a temp hack */ + size_t iesize; + + /* Is there enough data to decode it? */ + if (evt->notif.size < sizeof(*bpoiec)) { + dev_err(dev, "BPOIEC notification: Not enough data to " + "decode (%zu vs %zu bytes needed)\n", + evt->notif.size, sizeof(*bpoiec)); + goto error; + } + bpoiec = container_of(evt->notif.rceb, struct uwb_rc_evt_bpoie_change, rceb); + iesize = le16_to_cpu(bpoiec->wBPOIELength); + if (iesize < sizeof(*bpoie)) { + dev_err(dev, "BPOIEC notification: Not enough IE data to " + "decode (%zu vs %zu bytes needed)\n", + iesize, sizeof(*bpoie)); + goto error; + } + if (++count % 1000 == 0) /* Lame placeholder */ + dev_info(dev, "BPOIE: %u changes received\n", count); + /* + * FIXME: At this point we should go over all the IEs in the + * bpoiec->BPOIE array and act on each. + */ + result = 0; +error: + return result; +} + +/** + * uwb_bg_joined - is the RC in a beacon group? + * @rc: the radio controller + * + * Returns true if the radio controller is in a beacon group (even if + * it's the sole member). + */ +int uwb_bg_joined(struct uwb_rc *rc) +{ + return rc->beaconing != -1; +} +EXPORT_SYMBOL_GPL(uwb_bg_joined); + +/* + * Print beaconing state. + */ +static ssize_t uwb_rc_beacon_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct uwb_dev *uwb_dev = to_uwb_dev(dev); + struct uwb_rc *rc = uwb_dev->rc; + ssize_t result; + + mutex_lock(&rc->uwb_dev.mutex); + result = sprintf(buf, "%d\n", rc->beaconing); + mutex_unlock(&rc->uwb_dev.mutex); + return result; +} + +/* + * Start beaconing on the specified channel, or stop beaconing. + * + * The BPST offset of when to start searching for a beacon group to + * join may be specified. + */ +static ssize_t uwb_rc_beacon_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t size) +{ + struct uwb_dev *uwb_dev = to_uwb_dev(dev); + struct uwb_rc *rc = uwb_dev->rc; + int channel; + unsigned bpst_offset = 0; + ssize_t result = -EINVAL; + + result = sscanf(buf, "%d %u\n", &channel, &bpst_offset); + if (result >= 1) + result = uwb_rc_beacon(rc, channel, bpst_offset); + + return result < 0 ? result : size; +} +DEVICE_ATTR(beacon, S_IRUGO | S_IWUSR, uwb_rc_beacon_show, uwb_rc_beacon_store); diff --git a/drivers/uwb/driver.c b/drivers/uwb/driver.c new file mode 100644 index 000000000000..521cdeb84971 --- /dev/null +++ b/drivers/uwb/driver.c @@ -0,0 +1,144 @@ +/* + * Ultra Wide Band + * Driver initialization, etc + * + * Copyright (C) 2005-2006 Intel Corporation + * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + * + * + * FIXME: docs + * + * Life cycle: FIXME: explain + * + * UWB radio controller: + * + * 1. alloc a uwb_rc, zero it + * 2. call uwb_rc_init() on it to set it up + ops (won't do any + * kind of allocation) + * 3. register (now it is owned by the UWB stack--deregister before + * freeing/destroying). + * 4. It lives on it's own now (UWB stack handles)--when it + * disconnects, call unregister() + * 5. free it. + * + * Make sure you have a reference to the uwb_rc before calling + * any of the UWB API functions. + * + * TODO: + * + * 1. Locking and life cycle management is crappy still. All entry + * points to the UWB HCD API assume you have a reference on the + * uwb_rc structure and that it won't go away. They mutex lock it + * before doing anything. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/device.h> +#include <linux/err.h> +#include <linux/kdev_t.h> +#include <linux/random.h> +#include <linux/uwb/debug.h> +#include "uwb-internal.h" + + +/* UWB stack attributes (or 'global' constants) */ + + +/** + * If a beacon dissapears for longer than this, then we consider the + * device who was represented by that beacon to be gone. + * + * ECMA-368[17.2.3, last para] establishes that a device must not + * consider a device to be its neighbour if he doesn't receive a beacon + * for more than mMaxLostBeacons. mMaxLostBeacons is defined in + * ECMA-368[17.16] as 3; because we can get only one beacon per + * superframe, that'd be 3 * 65ms = 195 ~ 200 ms. Let's give it time + * for jitter and stuff and make it 500 ms. + */ +unsigned long beacon_timeout_ms = 500; + +static +ssize_t beacon_timeout_ms_show(struct class *class, char *buf) +{ + return scnprintf(buf, PAGE_SIZE, "%lu\n", beacon_timeout_ms); +} + +static +ssize_t beacon_timeout_ms_store(struct class *class, + const char *buf, size_t size) +{ + unsigned long bt; + ssize_t result; + result = sscanf(buf, "%lu", &bt); + if (result != 1) + return -EINVAL; + beacon_timeout_ms = bt; + return size; +} + +static struct class_attribute uwb_class_attrs[] = { + __ATTR(beacon_timeout_ms, S_IWUSR | S_IRUGO, + beacon_timeout_ms_show, beacon_timeout_ms_store), + __ATTR_NULL, +}; + +/** Device model classes */ +struct class uwb_rc_class = { + .name = "uwb_rc", + .class_attrs = uwb_class_attrs, +}; + + +static int __init uwb_subsys_init(void) +{ + int result = 0; + + result = uwb_est_create(); + if (result < 0) { + printk(KERN_ERR "uwb: Can't initialize EST subsystem\n"); + goto error_est_init; + } + + result = class_register(&uwb_rc_class); + if (result < 0) + goto error_uwb_rc_class_register; + uwbd_start(); + uwb_dbg_init(); + return 0; + +error_uwb_rc_class_register: + uwb_est_destroy(); +error_est_init: + return result; +} +module_init(uwb_subsys_init); + +static void __exit uwb_subsys_exit(void) +{ + uwb_dbg_exit(); + uwbd_stop(); + class_unregister(&uwb_rc_class); + uwb_est_destroy(); + return; +} +module_exit(uwb_subsys_exit); + +MODULE_AUTHOR("Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>"); +MODULE_DESCRIPTION("Ultra Wide Band core"); +MODULE_LICENSE("GPL"); diff --git a/drivers/uwb/drp-avail.c b/drivers/uwb/drp-avail.c new file mode 100644 index 000000000000..3febd8552808 --- /dev/null +++ b/drivers/uwb/drp-avail.c @@ -0,0 +1,288 @@ +/* + * Ultra Wide Band + * DRP availability management + * + * Copyright (C) 2005-2006 Intel Corporation + * Reinette Chatre <reinette.chatre@intel.com> + * Copyright (C) 2008 Cambridge Silicon Radio Ltd. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + * + * + * Manage DRP Availability (the MAS available for DRP + * reservations). Thus: + * + * - Handle DRP Availability Change notifications + * + * - Allow the reservation manager to indicate MAS reserved/released + * by local (owned by/targeted at the radio controller) + * reservations. + * + * - Based on the two sources above, generate a DRP Availability IE to + * be included in the beacon. + * + * See also the documentation for struct uwb_drp_avail. + */ + +#include <linux/errno.h> +#include <linux/module.h> +#include <linux/device.h> +#include <linux/bitmap.h> +#include "uwb-internal.h" + +/** + * uwb_drp_avail_init - initialize an RC's MAS availability + * + * All MAS are available initially. The RC will inform use which + * slots are used for the BP (it may change in size). + */ +void uwb_drp_avail_init(struct uwb_rc *rc) +{ + bitmap_fill(rc->drp_avail.global, UWB_NUM_MAS); + bitmap_fill(rc->drp_avail.local, UWB_NUM_MAS); + bitmap_fill(rc->drp_avail.pending, UWB_NUM_MAS); +} + +/* + * Determine MAS available for new local reservations. + * + * avail = global & local & pending + */ +static void uwb_drp_available(struct uwb_rc *rc, struct uwb_mas_bm *avail) +{ + bitmap_and(avail->bm, rc->drp_avail.global, rc->drp_avail.local, UWB_NUM_MAS); + bitmap_and(avail->bm, avail->bm, rc->drp_avail.pending, UWB_NUM_MAS); +} + +/** + * uwb_drp_avail_reserve_pending - reserve MAS for a new reservation + * @rc: the radio controller + * @mas: the MAS to reserve + * + * Returns 0 on success, or -EBUSY if the MAS requested aren't available. + */ +int uwb_drp_avail_reserve_pending(struct uwb_rc *rc, struct uwb_mas_bm *mas) +{ + struct uwb_mas_bm avail; + + uwb_drp_available(rc, &avail); + if (!bitmap_subset(mas->bm, avail.bm, UWB_NUM_MAS)) + return -EBUSY; + + bitmap_andnot(rc->drp_avail.pending, rc->drp_avail.pending, mas->bm, UWB_NUM_MAS); + return 0; +} + +/** + * uwb_drp_avail_reserve - reserve MAS for an established reservation + * @rc: the radio controller + * @mas: the MAS to reserve + */ +void uwb_drp_avail_reserve(struct uwb_rc *rc, struct uwb_mas_bm *mas) +{ + bitmap_or(rc->drp_avail.pending, rc->drp_avail.pending, mas->bm, UWB_NUM_MAS); + bitmap_andnot(rc->drp_avail.local, rc->drp_avail.local, mas->bm, UWB_NUM_MAS); + rc->drp_avail.ie_valid = false; +} + +/** + * uwb_drp_avail_release - release MAS from a pending or established reservation + * @rc: the radio controller + * @mas: the MAS to release + */ +void uwb_drp_avail_release(struct uwb_rc *rc, struct uwb_mas_bm *mas) +{ + bitmap_or(rc->drp_avail.local, rc->drp_avail.local, mas->bm, UWB_NUM_MAS); + bitmap_or(rc->drp_avail.pending, rc->drp_avail.pending, mas->bm, UWB_NUM_MAS); + rc->drp_avail.ie_valid = false; +} + +/** + * uwb_drp_avail_ie_update - update the DRP Availability IE + * @rc: the radio controller + * + * avail = global & local + */ +void uwb_drp_avail_ie_update(struct uwb_rc *rc) +{ + struct uwb_mas_bm avail; + + bitmap_and(avail.bm, rc->drp_avail.global, rc->drp_avail.local, UWB_NUM_MAS); + + rc->drp_avail.ie.hdr.element_id = UWB_IE_DRP_AVAILABILITY; + rc->drp_avail.ie.hdr.length = UWB_NUM_MAS / 8; + uwb_mas_bm_copy_le(rc->drp_avail.ie.bmp, &avail); + rc->drp_avail.ie_valid = true; +} + +/** + * Create an unsigned long from a buffer containing a byte stream. + * + * @array: pointer to buffer + * @itr: index of buffer from where we start + * @len: the buffer's remaining size may not be exact multiple of + * sizeof(unsigned long), @len is the length of buffer that needs + * to be converted. This will be sizeof(unsigned long) or smaller + * (BUG if not). If it is smaller then we will pad the remaining + * space of the result with zeroes. + */ +static +unsigned long get_val(u8 *array, size_t itr, size_t len) +{ + unsigned long val = 0; + size_t top = itr + len; + + BUG_ON(len > sizeof(val)); + + while (itr < top) { + val <<= 8; + val |= array[top - 1]; + top--; + } + val <<= 8 * (sizeof(val) - len); /* padding */ + return val; +} + +/** + * Initialize bitmap from data buffer. + * + * The bitmap to be converted could come from a IE, for example a + * DRP Availability IE. + * From ECMA-368 1.0 [16.8.7]: " + * octets: 1 1 N * (0 to 32) + * Element ID Length (=N) DRP Availability Bitmap + * + * The DRP Availability Bitmap field is up to 256 bits long, one + * bit for each MAS in the superframe, where the least-significant + * bit of the field corresponds to the first MAS in the superframe + * and successive bits correspond to successive MASs." + * + * The DRP Availability bitmap is in octets from 0 to 32, so octet + * 32 contains bits for MAS 1-8, etc. If the bitmap is smaller than 32 + * octets, the bits in octets not included at the end of the bitmap are + * treated as zero. In this case (when the bitmap is smaller than 32 + * octets) the MAS represented range from MAS 1 to MAS (size of bitmap) + * with the last octet still containing bits for MAS 1-8, etc. + * + * For example: + * F00F0102 03040506 0708090A 0B0C0D0E 0F010203 + * ^^^^ + * |||| + * |||| + * |||\LSB of byte is MAS 9 + * ||\MSB of byte is MAS 16 + * |\LSB of first byte is MAS 1 + * \ MSB of byte is MAS 8 + * + * An example of this encoding can be found in ECMA-368 Annex-D [Table D.11] + * + * The resulting bitmap will have the following mapping: + * bit position 0 == MAS 1 + * bit position 1 == MAS 2 + * ... + * bit position (UWB_NUM_MAS - 1) == MAS UWB_NUM_MAS + * + * @bmp_itr: pointer to bitmap (can be declared with DECLARE_BITMAP) + * @buffer: pointer to buffer containing bitmap data in big endian + * format (MSB first) + * @buffer_size:number of bytes with which bitmap should be initialized + */ +static +void buffer_to_bmp(unsigned long *bmp_itr, void *_buffer, + size_t buffer_size) +{ + u8 *buffer = _buffer; + size_t itr, len; + unsigned long val; + + itr = 0; + while (itr < buffer_size) { + len = buffer_size - itr >= sizeof(val) ? + sizeof(val) : buffer_size - itr; + val = get_val(buffer, itr, len); + bmp_itr[itr / sizeof(val)] = val; + itr += sizeof(val); + } +} + + +/** + * Extract DRP Availability bitmap from the notification. + * + * The notification that comes in contains a bitmap of (UWB_NUM_MAS / 8) bytes + * We convert that to our internal representation. + */ +static +int uwbd_evt_get_drp_avail(struct uwb_event *evt, unsigned long *bmp) +{ + struct device *dev = &evt->rc->uwb_dev.dev; + struct uwb_rc_evt_drp_avail *drp_evt; + int result = -EINVAL; + + /* Is there enough data to decode the event? */ + if (evt->notif.size < sizeof(*drp_evt)) { + dev_err(dev, "DRP Availability Change: Not enough " + "data to decode event [%zu bytes, %zu " + "needed]\n", evt->notif.size, sizeof(*drp_evt)); + goto error; + } + drp_evt = container_of(evt->notif.rceb, struct uwb_rc_evt_drp_avail, rceb); + buffer_to_bmp(bmp, drp_evt->bmp, UWB_NUM_MAS/8); + result = 0; +error: + return result; +} + + +/** + * Process an incoming DRP Availability notification. + * + * @evt: Event information (packs the actual event data, which + * radio controller it came to, etc). + * + * @returns: 0 on success (so uwbd() frees the event buffer), < 0 + * on error. + * + * According to ECMA-368 1.0 [16.8.7], bits set to ONE indicate that + * the MAS slot is available, bits set to ZERO indicate that the slot + * is busy. + * + * So we clear available slots, we set used slots :) + * + * The notification only marks non-availability based on the BP and + * received DRP IEs that are not for this radio controller. A copy of + * this bitmap is needed to generate the real availability (which + * includes local and pending reservations). + * + * The DRP Availability IE that this radio controller emits will need + * to be updated. + */ +int uwbd_evt_handle_rc_drp_avail(struct uwb_event *evt) +{ + int result; + struct uwb_rc *rc = evt->rc; + DECLARE_BITMAP(bmp, UWB_NUM_MAS); + + result = uwbd_evt_get_drp_avail(evt, bmp); + if (result < 0) + return result; + + mutex_lock(&rc->rsvs_mutex); + bitmap_copy(rc->drp_avail.global, bmp, UWB_NUM_MAS); + rc->drp_avail.ie_valid = false; + mutex_unlock(&rc->rsvs_mutex); + + uwb_rsv_sched_update(rc); + + return 0; +} diff --git a/drivers/uwb/drp-ie.c b/drivers/uwb/drp-ie.c new file mode 100644 index 000000000000..882724c5f126 --- /dev/null +++ b/drivers/uwb/drp-ie.c @@ -0,0 +1,232 @@ +/* + * UWB DRP IE management. + * + * Copyright (C) 2005-2006 Intel Corporation + * Copyright (C) 2008 Cambridge Silicon Radio Ltd. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include <linux/version.h> +#include <linux/kernel.h> +#include <linux/random.h> +#include <linux/uwb.h> + +#include "uwb-internal.h" + +/* + * Allocate a DRP IE. + * + * To save having to free/allocate a DRP IE when its MAS changes, + * enough memory is allocated for the maxiumum number of DRP + * allocation fields. This gives an overhead per reservation of up to + * (UWB_NUM_ZONES - 1) * 4 = 60 octets. + */ +static struct uwb_ie_drp *uwb_drp_ie_alloc(void) +{ + struct uwb_ie_drp *drp_ie; + unsigned tiebreaker; + + drp_ie = kzalloc(sizeof(struct uwb_ie_drp) + + UWB_NUM_ZONES * sizeof(struct uwb_drp_alloc), + GFP_KERNEL); + if (drp_ie) { + drp_ie->hdr.element_id = UWB_IE_DRP; + + get_random_bytes(&tiebreaker, sizeof(unsigned)); + uwb_ie_drp_set_tiebreaker(drp_ie, tiebreaker & 1); + } + return drp_ie; +} + + +/* + * Fill a DRP IE's allocation fields from a MAS bitmap. + */ +static void uwb_drp_ie_from_bm(struct uwb_ie_drp *drp_ie, + struct uwb_mas_bm *mas) +{ + int z, i, num_fields = 0, next = 0; + struct uwb_drp_alloc *zones; + __le16 current_bmp; + DECLARE_BITMAP(tmp_bmp, UWB_NUM_MAS); + DECLARE_BITMAP(tmp_mas_bm, UWB_MAS_PER_ZONE); + + zones = drp_ie->allocs; + + bitmap_copy(tmp_bmp, mas->bm, UWB_NUM_MAS); + + /* Determine unique MAS bitmaps in zones from bitmap. */ + for (z = 0; z < UWB_NUM_ZONES; z++) { + bitmap_copy(tmp_mas_bm, tmp_bmp, UWB_MAS_PER_ZONE); + if (bitmap_weight(tmp_mas_bm, UWB_MAS_PER_ZONE) > 0) { + bool found = false; + current_bmp = (__le16) *tmp_mas_bm; + for (i = 0; i < next; i++) { + if (current_bmp == zones[i].mas_bm) { + zones[i].zone_bm |= 1 << z; + found = true; + break; + } + } + if (!found) { + num_fields++; + zones[next].zone_bm = 1 << z; + zones[next].mas_bm = current_bmp; + next++; + } + } + bitmap_shift_right(tmp_bmp, tmp_bmp, UWB_MAS_PER_ZONE, UWB_NUM_MAS); + } + + /* Store in format ready for transmission (le16). */ + for (i = 0; i < num_fields; i++) { + drp_ie->allocs[i].zone_bm = cpu_to_le16(zones[i].zone_bm); + drp_ie->allocs[i].mas_bm = cpu_to_le16(zones[i].mas_bm); + } + + drp_ie->hdr.length = sizeof(struct uwb_ie_drp) - sizeof(struct uwb_ie_hdr) + + num_fields * sizeof(struct uwb_drp_alloc); +} + +/** + * uwb_drp_ie_update - update a reservation's DRP IE + * @rsv: the reservation + */ +int uwb_drp_ie_update(struct uwb_rsv *rsv) +{ + struct device *dev = &rsv->rc->uwb_dev.dev; + struct uwb_ie_drp *drp_ie; + int reason_code, status; + + switch (rsv->state) { + case UWB_RSV_STATE_NONE: + kfree(rsv->drp_ie); + rsv->drp_ie = NULL; + return 0; + case UWB_RSV_STATE_O_INITIATED: + reason_code = UWB_DRP_REASON_ACCEPTED; + status = 0; + break; + case UWB_RSV_STATE_O_PENDING: + reason_code = UWB_DRP_REASON_ACCEPTED; + status = 0; + break; + case UWB_RSV_STATE_O_MODIFIED: + reason_code = UWB_DRP_REASON_MODIFIED; + status = 1; + break; + case UWB_RSV_STATE_O_ESTABLISHED: + reason_code = UWB_DRP_REASON_ACCEPTED; + status = 1; + break; + case UWB_RSV_STATE_T_ACCEPTED: + reason_code = UWB_DRP_REASON_ACCEPTED; + status = 1; + break; + case UWB_RSV_STATE_T_DENIED: + reason_code = UWB_DRP_REASON_DENIED; + status = 0; + break; + default: + dev_dbg(dev, "rsv with unhandled state (%d)\n", rsv->state); + return -EINVAL; + } + + if (rsv->drp_ie == NULL) { + rsv->drp_ie = uwb_drp_ie_alloc(); + if (rsv->drp_ie == NULL) + return -ENOMEM; + } + drp_ie = rsv->drp_ie; + + uwb_ie_drp_set_owner(drp_ie, uwb_rsv_is_owner(rsv)); + uwb_ie_drp_set_status(drp_ie, status); + uwb_ie_drp_set_reason_code(drp_ie, reason_code); + uwb_ie_drp_set_stream_index(drp_ie, rsv->stream); + uwb_ie_drp_set_type(drp_ie, rsv->type); + + if (uwb_rsv_is_owner(rsv)) { + switch (rsv->target.type) { + case UWB_RSV_TARGET_DEV: + drp_ie->dev_addr = rsv->target.dev->dev_addr; + break; + case UWB_RSV_TARGET_DEVADDR: + drp_ie->dev_addr = rsv->target.devaddr; + break; + } + } else + drp_ie->dev_addr = rsv->owner->dev_addr; + + uwb_drp_ie_from_bm(drp_ie, &rsv->mas); + + rsv->ie_valid = true; + return 0; +} + +/* + * Set MAS bits from given MAS bitmap in a single zone of large bitmap. + * + * We are given a zone id and the MAS bitmap of bits that need to be set in + * this zone. Note that this zone may already have bits set and this only + * adds settings - we cannot simply assign the MAS bitmap contents to the + * zone contents. We iterate over the the bits (MAS) in the zone and set the + * bits that are set in the given MAS bitmap. + */ +static +void uwb_drp_ie_single_zone_to_bm(struct uwb_mas_bm *bm, u8 zone, u16 mas_bm) +{ + int mas; + u16 mas_mask; + + for (mas = 0; mas < UWB_MAS_PER_ZONE; mas++) { + mas_mask = 1 << mas; + if (mas_bm & mas_mask) + set_bit(zone * UWB_NUM_ZONES + mas, bm->bm); + } +} + +/** + * uwb_drp_ie_zones_to_bm - convert DRP allocation fields to a bitmap + * @mas: MAS bitmap that will be populated to correspond to the + * allocation fields in the DRP IE + * @drp_ie: the DRP IE that contains the allocation fields. + * + * The input format is an array of MAS allocation fields (16 bit Zone + * bitmap, 16 bit MAS bitmap) as described in [ECMA-368] section + * 16.8.6. The output is a full 256 bit MAS bitmap. + * + * We go over all the allocation fields, for each allocation field we + * know which zones are impacted. We iterate over all the zones + * impacted and call a function that will set the correct MAS bits in + * each zone. + */ +void uwb_drp_ie_to_bm(struct uwb_mas_bm *bm, const struct uwb_ie_drp *drp_ie) +{ + int numallocs = (drp_ie->hdr.length - 4) / 4; + const struct uwb_drp_alloc *alloc; + int cnt; + u16 zone_bm, mas_bm; + u8 zone; + u16 zone_mask; + + for (cnt = 0; cnt < numallocs; cnt++) { + alloc = &drp_ie->allocs[cnt]; + zone_bm = le16_to_cpu(alloc->zone_bm); + mas_bm = le16_to_cpu(alloc->mas_bm); + for (zone = 0; zone < UWB_NUM_ZONES; zone++) { + zone_mask = 1 << zone; + if (zone_bm & zone_mask) + uwb_drp_ie_single_zone_to_bm(bm, zone, mas_bm); + } + } +} diff --git a/drivers/uwb/drp.c b/drivers/uwb/drp.c new file mode 100644 index 000000000000..c0b1e5e2bd08 --- /dev/null +++ b/drivers/uwb/drp.c @@ -0,0 +1,461 @@ +/* + * Ultra Wide Band + * Dynamic Reservation Protocol handling + * + * Copyright (C) 2005-2006 Intel Corporation + * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> + * Copyright (C) 2008 Cambridge Silicon Radio Ltd. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include <linux/kthread.h> +#include <linux/freezer.h> +#include <linux/delay.h> +#include "uwb-internal.h" + +/** + * Construct and send the SET DRP IE + * + * @rc: UWB Host controller + * @returns: >= 0 number of bytes still available in the beacon + * < 0 errno code on error. + * + * See WUSB[8.6.2.7]: The host must set all the DRP IEs that it wants the + * device to include in its beacon at the same time. We thus have to + * traverse all reservations and include the DRP IEs of all PENDING + * and NEGOTIATED reservations in a SET DRP command for transmission. + * + * A DRP Availability IE is appended. + * + * rc->uwb_dev.mutex is held + * + * FIXME We currently ignore the returned value indicating the remaining space + * in beacon. This could be used to deny reservation requests earlier if + * determined that they would cause the beacon space to be exceeded. + */ +static +int uwb_rc_gen_send_drp_ie(struct uwb_rc *rc) +{ + int result; + struct device *dev = &rc->uwb_dev.dev; + struct uwb_rc_cmd_set_drp_ie *cmd; + struct uwb_rc_evt_set_drp_ie reply; + struct uwb_rsv *rsv; + int num_bytes = 0; + u8 *IEDataptr; + + result = -ENOMEM; + /* First traverse all reservations to determine memory needed. */ + list_for_each_entry(rsv, &rc->reservations, rc_node) { + if (rsv->drp_ie != NULL) + num_bytes += rsv->drp_ie->hdr.length + 2; + } + num_bytes += sizeof(rc->drp_avail.ie); + cmd = kzalloc(sizeof(*cmd) + num_bytes, GFP_KERNEL); + if (cmd == NULL) + goto error; + cmd->rccb.bCommandType = UWB_RC_CET_GENERAL; + cmd->rccb.wCommand = cpu_to_le16(UWB_RC_CMD_SET_DRP_IE); + cmd->wIELength = num_bytes; + IEDataptr = (u8 *)&cmd->IEData[0]; + + /* Next traverse all reservations to place IEs in allocated memory. */ + list_for_each_entry(rsv, &rc->reservations, rc_node) { + if (rsv->drp_ie != NULL) { + memcpy(IEDataptr, rsv->drp_ie, + rsv->drp_ie->hdr.length + 2); + IEDataptr += rsv->drp_ie->hdr.length + 2; + } + } + memcpy(IEDataptr, &rc->drp_avail.ie, sizeof(rc->drp_avail.ie)); + + reply.rceb.bEventType = UWB_RC_CET_GENERAL; + reply.rceb.wEvent = UWB_RC_CMD_SET_DRP_IE; + result = uwb_rc_cmd(rc, "SET-DRP-IE", &cmd->rccb, + sizeof(*cmd) + num_bytes, &reply.rceb, + sizeof(reply)); + if (result < 0) + goto error_cmd; + result = le16_to_cpu(reply.wRemainingSpace); + if (reply.bResultCode != UWB_RC_RES_SUCCESS) { + dev_err(&rc->uwb_dev.dev, "SET-DRP-IE: command execution " + "failed: %s (%d). RemainingSpace in beacon " + "= %d\n", uwb_rc_strerror(reply.bResultCode), + reply.bResultCode, result); + result = -EIO; + } else { + dev_dbg(dev, "SET-DRP-IE sent. RemainingSpace in beacon " + "= %d.\n", result); + result = 0; + } +error_cmd: + kfree(cmd); +error: + return result; + +} +/** + * Send all DRP IEs associated with this host + * + * @returns: >= 0 number of bytes still available in the beacon + * < 0 errno code on error. + * + * As per the protocol we obtain the host controller device lock to access + * bandwidth structures. + */ +int uwb_rc_send_all_drp_ie(struct uwb_rc *rc) +{ + int result; + + mutex_lock(&rc->uwb_dev.mutex); + result = uwb_rc_gen_send_drp_ie(rc); + mutex_unlock(&rc->uwb_dev.mutex); + return result; +} + +void uwb_drp_handle_timeout(struct uwb_rsv *rsv) +{ + struct device *dev = &rsv->rc->uwb_dev.dev; + + dev_dbg(dev, "reservation timeout in state %s (%d)\n", + uwb_rsv_state_str(rsv->state), rsv->state); + + switch (rsv->state) { + case UWB_RSV_STATE_O_INITIATED: + if (rsv->is_multicast) { + uwb_rsv_set_state(rsv, UWB_RSV_STATE_O_ESTABLISHED); + return; + } + break; + case UWB_RSV_STATE_O_ESTABLISHED: + if (rsv->is_multicast) + return; + break; + default: + break; + } + uwb_rsv_remove(rsv); +} + +/* + * Based on the DRP IE, transition a target reservation to a new + * state. + */ +static void uwb_drp_process_target(struct uwb_rc *rc, struct uwb_rsv *rsv, + struct uwb_ie_drp *drp_ie) +{ + struct device *dev = &rc->uwb_dev.dev; + int status; + enum uwb_drp_reason reason_code; + + status = uwb_ie_drp_status(drp_ie); + reason_code = uwb_ie_drp_reason_code(drp_ie); + + if (status) { + switch (reason_code) { + case UWB_DRP_REASON_ACCEPTED: + uwb_rsv_set_state(rsv, UWB_RSV_STATE_T_ACCEPTED); + break; + case UWB_DRP_REASON_MODIFIED: + dev_err(dev, "FIXME: unhandled reason code (%d/%d)\n", + reason_code, status); + break; + default: + dev_warn(dev, "ignoring invalid DRP IE state (%d/%d)\n", + reason_code, status); + } + } else { + switch (reason_code) { + case UWB_DRP_REASON_ACCEPTED: + /* New reservations are handled in uwb_rsv_find(). */ + break; + case UWB_DRP_REASON_DENIED: + uwb_rsv_set_state(rsv, UWB_RSV_STATE_NONE); + break; + case UWB_DRP_REASON_CONFLICT: + case UWB_DRP_REASON_MODIFIED: + dev_err(dev, "FIXME: unhandled reason code (%d/%d)\n", + reason_code, status); + break; + default: + dev_warn(dev, "ignoring invalid DRP IE state (%d/%d)\n", + reason_code, status); + } + } +} + +/* + * Based on the DRP IE, transition an owner reservation to a new + * state. + */ +static void uwb_drp_process_owner(struct uwb_rc *rc, struct uwb_rsv *rsv, + struct uwb_ie_drp *drp_ie) +{ + struct device *dev = &rc->uwb_dev.dev; + int status; + enum uwb_drp_reason reason_code; + + status = uwb_ie_drp_status(drp_ie); + reason_code = uwb_ie_drp_reason_code(drp_ie); + + if (status) { + switch (reason_code) { + case UWB_DRP_REASON_ACCEPTED: + uwb_rsv_set_state(rsv, UWB_RSV_STATE_O_ESTABLISHED); + break; + case UWB_DRP_REASON_MODIFIED: + dev_err(dev, "FIXME: unhandled reason code (%d/%d)\n", + reason_code, status); + break; + default: + dev_warn(dev, "ignoring invalid DRP IE state (%d/%d)\n", + reason_code, status); + } + } else { + switch (reason_code) { + case UWB_DRP_REASON_PENDING: + uwb_rsv_set_state(rsv, UWB_RSV_STATE_O_PENDING); + break; + case UWB_DRP_REASON_DENIED: + uwb_rsv_set_state(rsv, UWB_RSV_STATE_NONE); + break; + case UWB_DRP_REASON_CONFLICT: + case UWB_DRP_REASON_MODIFIED: + dev_err(dev, "FIXME: unhandled reason code (%d/%d)\n", + reason_code, status); + break; + default: + dev_warn(dev, "ignoring invalid DRP IE state (%d/%d)\n", + reason_code, status); + } + } +} + +/* + * Process a received DRP IE, it's either for a reservation owned by + * the RC or targeted at it (or it's for a WUSB cluster reservation). + */ +static void uwb_drp_process(struct uwb_rc *rc, struct uwb_dev *src, + struct uwb_ie_drp *drp_ie) +{ + struct uwb_rsv *rsv; + + rsv = uwb_rsv_find(rc, src, drp_ie); + if (!rsv) { + /* + * No reservation? It's either for a recently + * terminated reservation; or the DRP IE couldn't be + * processed (e.g., an invalid IE or out of memory). + */ + return; + } + + /* + * Do nothing with DRP IEs for reservations that have been + * terminated. + */ + if (rsv->state == UWB_RSV_STATE_NONE) { + uwb_rsv_set_state(rsv, UWB_RSV_STATE_NONE); + return; + } + + if (uwb_ie_drp_owner(drp_ie)) + uwb_drp_process_target(rc, rsv, drp_ie); + else + uwb_drp_process_owner(rc, rsv, drp_ie); +} + + +/* + * Process all the DRP IEs (both DRP IEs and the DRP Availability IE) + * from a device. + */ +static +void uwb_drp_process_all(struct uwb_rc *rc, struct uwb_rc_evt_drp *drp_evt, + size_t ielen, struct uwb_dev *src_dev) +{ + struct device *dev = &rc->uwb_dev.dev; + struct uwb_ie_hdr *ie_hdr; + void *ptr; + + ptr = drp_evt->ie_data; + for (;;) { + ie_hdr = uwb_ie_next(&ptr, &ielen); + if (!ie_hdr) + break; + + switch (ie_hdr->element_id) { + case UWB_IE_DRP_AVAILABILITY: + /* FIXME: does something need to be done with this? */ + break; + case UWB_IE_DRP: + uwb_drp_process(rc, src_dev, (struct uwb_ie_drp *)ie_hdr); + break; + default: + dev_warn(dev, "unexpected IE in DRP notification\n"); + break; + } + } + + if (ielen > 0) + dev_warn(dev, "%d octets remaining in DRP notification\n", + (int)ielen); +} + + +/* + * Go through all the DRP IEs and find the ones that conflict with our + * reservations. + * + * FIXME: must resolve the conflict according the the rules in + * [ECMA-368]. + */ +static +void uwb_drp_process_conflict_all(struct uwb_rc *rc, struct uwb_rc_evt_drp *drp_evt, + size_t ielen, struct uwb_dev *src_dev) +{ + struct device *dev = &rc->uwb_dev.dev; + struct uwb_ie_hdr *ie_hdr; + struct uwb_ie_drp *drp_ie; + void *ptr; + + ptr = drp_evt->ie_data; + for (;;) { + ie_hdr = uwb_ie_next(&ptr, &ielen); + if (!ie_hdr) + break; + + drp_ie = container_of(ie_hdr, struct uwb_ie_drp, hdr); + + /* FIXME: check if this DRP IE conflicts. */ + } + + if (ielen > 0) + dev_warn(dev, "%d octets remaining in DRP notification\n", + (int)ielen); +} + + +/* + * Terminate all reservations owned by, or targeted at, 'uwb_dev'. + */ +static void uwb_drp_terminate_all(struct uwb_rc *rc, struct uwb_dev *uwb_dev) +{ + struct uwb_rsv *rsv; + + list_for_each_entry(rsv, &rc->reservations, rc_node) { + if (rsv->owner == uwb_dev + || (rsv->target.type == UWB_RSV_TARGET_DEV && rsv->target.dev == uwb_dev)) + uwb_rsv_remove(rsv); + } +} + + +/** + * uwbd_evt_handle_rc_drp - handle a DRP_IE event + * @evt: the DRP_IE event from the radio controller + * + * This processes DRP notifications from the radio controller, either + * initiating a new reservation or transitioning an existing + * reservation into a different state. + * + * DRP notifications can occur for three different reasons: + * + * - UWB_DRP_NOTIF_DRP_IE_RECVD: one or more DRP IEs with the RC as + * the target or source have been recieved. + * + * These DRP IEs could be new or for an existing reservation. + * + * If the DRP IE for an existing reservation ceases to be to + * recieved for at least mMaxLostBeacons, the reservation should be + * considered to be terminated. Note that the TERMINATE reason (see + * below) may not always be signalled (e.g., the remote device has + * two or more reservations established with the RC). + * + * - UWB_DRP_NOTIF_CONFLICT: DRP IEs from any device in the beacon + * group conflict with the RC's reservations. + * + * - UWB_DRP_NOTIF_TERMINATE: DRP IEs are no longer being received + * from a device (i.e., it's terminated all reservations). + * + * Only the software state of the reservations is changed; the setting + * of the radio controller's DRP IEs is done after all the events in + * an event buffer are processed. This saves waiting multiple times + * for the SET_DRP_IE command to complete. + */ +int uwbd_evt_handle_rc_drp(struct uwb_event *evt) +{ + struct device *dev = &evt->rc->uwb_dev.dev; + struct uwb_rc *rc = evt->rc; + struct uwb_rc_evt_drp *drp_evt; + size_t ielength, bytes_left; + struct uwb_dev_addr src_addr; + struct uwb_dev *src_dev; + int reason; + + /* Is there enough data to decode the event (and any IEs in + its payload)? */ + if (evt->notif.size < sizeof(*drp_evt)) { + dev_err(dev, "DRP event: Not enough data to decode event " + "[%zu bytes left, %zu needed]\n", + evt->notif.size, sizeof(*drp_evt)); + return 0; + } + bytes_left = evt->notif.size - sizeof(*drp_evt); + drp_evt = container_of(evt->notif.rceb, struct uwb_rc_evt_drp, rceb); + ielength = le16_to_cpu(drp_evt->ie_length); + if (bytes_left != ielength) { + dev_err(dev, "DRP event: Not enough data in payload [%zu" + "bytes left, %zu declared in the event]\n", + bytes_left, ielength); + return 0; + } + + memcpy(src_addr.data, &drp_evt->src_addr, sizeof(src_addr)); + src_dev = uwb_dev_get_by_devaddr(rc, &src_addr); + if (!src_dev) { + /* + * A DRP notification from an unrecognized device. + * + * This is probably from a WUSB device that doesn't + * have an EUI-48 and therefore doesn't show up in the + * UWB device database. It's safe to simply ignore + * these. + */ + return 0; + } + + mutex_lock(&rc->rsvs_mutex); + + reason = uwb_rc_evt_drp_reason(drp_evt); + + switch (reason) { + case UWB_DRP_NOTIF_DRP_IE_RCVD: + uwb_drp_process_all(rc, drp_evt, ielength, src_dev); + break; + case UWB_DRP_NOTIF_CONFLICT: + uwb_drp_process_conflict_all(rc, drp_evt, ielength, src_dev); + break; + case UWB_DRP_NOTIF_TERMINATE: + uwb_drp_terminate_all(rc, src_dev); + break; + default: + dev_warn(dev, "ignored DRP event with reason code: %d\n", reason); + break; + } + + mutex_unlock(&rc->rsvs_mutex); + + uwb_dev_put(src_dev); + return 0; +} diff --git a/drivers/uwb/est.c b/drivers/uwb/est.c new file mode 100644 index 000000000000..5fe566b7c845 --- /dev/null +++ b/drivers/uwb/est.c @@ -0,0 +1,477 @@ +/* + * Ultra Wide Band Radio Control + * Event Size Tables management + * + * Copyright (C) 2005-2006 Intel Corporation + * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + * + * + * FIXME: docs + * + * Infrastructure, code and data tables for guessing the size of + * events received on the notification endpoints of UWB radio + * controllers. + * + * You define a table of events and for each, its size and how to get + * the extra size. + * + * ENTRY POINTS: + * + * uwb_est_{init/destroy}(): To initialize/release the EST subsystem. + * + * uwb_est_[u]register(): To un/register event size tables + * uwb_est_grow() + * + * uwb_est_find_size(): Get the size of an event + * uwb_est_get_size() + */ +#include <linux/spinlock.h> +#define D_LOCAL 0 +#include <linux/uwb/debug.h> +#include "uwb-internal.h" + + +struct uwb_est { + u16 type_event_high; + u16 vendor, product; + u8 entries; + const struct uwb_est_entry *entry; +}; + + +static struct uwb_est *uwb_est; +static u8 uwb_est_size; +static u8 uwb_est_used; +static DEFINE_RWLOCK(uwb_est_lock); + +/** + * WUSB Standard Event Size Table, HWA-RC interface + * + * Sizes for events and notifications type 0 (general), high nibble 0. + */ +static +struct uwb_est_entry uwb_est_00_00xx[] = { + [UWB_RC_EVT_IE_RCV] = { + .size = sizeof(struct uwb_rc_evt_ie_rcv), + .offset = 1 + offsetof(struct uwb_rc_evt_ie_rcv, wIELength), + }, + [UWB_RC_EVT_BEACON] = { + .size = sizeof(struct uwb_rc_evt_beacon), + .offset = 1 + offsetof(struct uwb_rc_evt_beacon, wBeaconInfoLength), + }, + [UWB_RC_EVT_BEACON_SIZE] = { + .size = sizeof(struct uwb_rc_evt_beacon_size), + }, + [UWB_RC_EVT_BPOIE_CHANGE] = { + .size = sizeof(struct uwb_rc_evt_bpoie_change), + .offset = 1 + offsetof(struct uwb_rc_evt_bpoie_change, + wBPOIELength), + }, + [UWB_RC_EVT_BP_SLOT_CHANGE] = { + .size = sizeof(struct uwb_rc_evt_bp_slot_change), + }, + [UWB_RC_EVT_BP_SWITCH_IE_RCV] = { + .size = sizeof(struct uwb_rc_evt_bp_switch_ie_rcv), + .offset = 1 + offsetof(struct uwb_rc_evt_bp_switch_ie_rcv, wIELength), + }, + [UWB_RC_EVT_DEV_ADDR_CONFLICT] = { + .size = sizeof(struct uwb_rc_evt_dev_addr_conflict), + }, + [UWB_RC_EVT_DRP_AVAIL] = { + .size = sizeof(struct uwb_rc_evt_drp_avail) + }, + [UWB_RC_EVT_DRP] = { + .size = sizeof(struct uwb_rc_evt_drp), + .offset = 1 + offsetof(struct uwb_rc_evt_drp, ie_length), + }, + [UWB_RC_EVT_BP_SWITCH_STATUS] = { + .size = sizeof(struct uwb_rc_evt_bp_switch_status), + }, + [UWB_RC_EVT_CMD_FRAME_RCV] = { + .size = sizeof(struct uwb_rc_evt_cmd_frame_rcv), + .offset = 1 + offsetof(struct uwb_rc_evt_cmd_frame_rcv, dataLength), + }, + [UWB_RC_EVT_CHANNEL_CHANGE_IE_RCV] = { + .size = sizeof(struct uwb_rc_evt_channel_change_ie_rcv), + .offset = 1 + offsetof(struct uwb_rc_evt_channel_change_ie_rcv, wIELength), + }, + [UWB_RC_CMD_CHANNEL_CHANGE] = { + .size = sizeof(struct uwb_rc_evt_confirm), + }, + [UWB_RC_CMD_DEV_ADDR_MGMT] = { + .size = sizeof(struct uwb_rc_evt_dev_addr_mgmt) }, + [UWB_RC_CMD_GET_IE] = { + .size = sizeof(struct uwb_rc_evt_get_ie), + .offset = 1 + offsetof(struct uwb_rc_evt_get_ie, wIELength), + }, + [UWB_RC_CMD_RESET] = { + .size = sizeof(struct uwb_rc_evt_confirm), + }, + [UWB_RC_CMD_SCAN] = { + .size = sizeof(struct uwb_rc_evt_confirm), + }, + [UWB_RC_CMD_SET_BEACON_FILTER] = { + .size = sizeof(struct uwb_rc_evt_confirm), + }, + [UWB_RC_CMD_SET_DRP_IE] = { + .size = sizeof(struct uwb_rc_evt_set_drp_ie), + }, + [UWB_RC_CMD_SET_IE] = { + .size = sizeof(struct uwb_rc_evt_set_ie), + }, + [UWB_RC_CMD_SET_NOTIFICATION_FILTER] = { + .size = sizeof(struct uwb_rc_evt_confirm), + }, + [UWB_RC_CMD_SET_TX_POWER] = { + .size = sizeof(struct uwb_rc_evt_confirm), + }, + [UWB_RC_CMD_SLEEP] = { + .size = sizeof(struct uwb_rc_evt_confirm), + }, + [UWB_RC_CMD_START_BEACON] = { + .size = sizeof(struct uwb_rc_evt_confirm), + }, + [UWB_RC_CMD_STOP_BEACON] = { + .size = sizeof(struct uwb_rc_evt_confirm), + }, + [UWB_RC_CMD_BP_MERGE] = { + .size = sizeof(struct uwb_rc_evt_confirm), + }, + [UWB_RC_CMD_SEND_COMMAND_FRAME] = { + .size = sizeof(struct uwb_rc_evt_confirm), + }, + [UWB_RC_CMD_SET_ASIE_NOTIF] = { + .size = sizeof(struct uwb_rc_evt_confirm), + }, +}; + +static +struct uwb_est_entry uwb_est_01_00xx[] = { + [UWB_RC_DAA_ENERGY_DETECTED] = { + .size = sizeof(struct uwb_rc_evt_daa_energy_detected), + }, + [UWB_RC_SET_DAA_ENERGY_MASK] = { + .size = sizeof(struct uwb_rc_evt_set_daa_energy_mask), + }, + [UWB_RC_SET_NOTIFICATION_FILTER_EX] = { + .size = sizeof(struct uwb_rc_evt_set_notification_filter_ex), + }, +}; + +/** + * Initialize the EST subsystem + * + * Register the standard tables also. + * + * FIXME: tag init + */ +int uwb_est_create(void) +{ + int result; + + uwb_est_size = 2; + uwb_est_used = 0; + uwb_est = kzalloc(uwb_est_size * sizeof(uwb_est[0]), GFP_KERNEL); + if (uwb_est == NULL) + return -ENOMEM; + + result = uwb_est_register(UWB_RC_CET_GENERAL, 0, 0xffff, 0xffff, + uwb_est_00_00xx, ARRAY_SIZE(uwb_est_00_00xx)); + if (result < 0) + goto out; + result = uwb_est_register(UWB_RC_CET_EX_TYPE_1, 0, 0xffff, 0xffff, + uwb_est_01_00xx, ARRAY_SIZE(uwb_est_01_00xx)); +out: + return result; +} + + +/** Clean it up */ +void uwb_est_destroy(void) +{ + kfree(uwb_est); + uwb_est = NULL; + uwb_est_size = uwb_est_used = 0; +} + + +/** + * Double the capacity of the EST table + * + * @returns 0 if ok, < 0 errno no error. + */ +static +int uwb_est_grow(void) +{ + size_t actual_size = uwb_est_size * sizeof(uwb_est[0]); + void *new = kmalloc(2 * actual_size, GFP_ATOMIC); + if (new == NULL) + return -ENOMEM; + memcpy(new, uwb_est, actual_size); + memset(new + actual_size, 0, actual_size); + kfree(uwb_est); + uwb_est = new; + uwb_est_size *= 2; + return 0; +} + + +/** + * Register an event size table + * + * Makes room for it if the table is full, and then inserts it in the + * right position (entries are sorted by type, event_high, vendor and + * then product). + * + * @vendor: vendor code for matching against the device (0x0000 and + * 0xffff mean any); use 0x0000 to force all to match without + * checking possible vendor specific ones, 0xfffff to match + * after checking vendor specific ones. + * + * @product: product code from that vendor; same matching rules, use + * 0x0000 for not allowing vendor specific matches, 0xffff + * for allowing. + * + * This arragement just makes the tables sort differenty. Because the + * table is sorted by growing type-event_high-vendor-product, a zero + * vendor will match before than a 0x456a vendor, that will match + * before a 0xfffff vendor. + * + * @returns 0 if ok, < 0 errno on error (-ENOENT if not found). + */ +/* FIXME: add bus type to vendor/product code */ +int uwb_est_register(u8 type, u8 event_high, u16 vendor, u16 product, + const struct uwb_est_entry *entry, size_t entries) +{ + unsigned long flags; + unsigned itr; + u16 type_event_high; + int result = 0; + + write_lock_irqsave(&uwb_est_lock, flags); + if (uwb_est_used == uwb_est_size) { + result = uwb_est_grow(); + if (result < 0) + goto out; + } + /* Find the right spot to insert it in */ + type_event_high = type << 8 | event_high; + for (itr = 0; itr < uwb_est_used; itr++) + if (uwb_est[itr].type_event_high < type + && uwb_est[itr].vendor < vendor + && uwb_est[itr].product < product) + break; + + /* Shift others to make room for the new one? */ + if (itr < uwb_est_used) + memmove(&uwb_est[itr+1], &uwb_est[itr], uwb_est_used - itr); + uwb_est[itr].type_event_high = type << 8 | event_high; + uwb_est[itr].vendor = vendor; + uwb_est[itr].product = product; + uwb_est[itr].entry = entry; + uwb_est[itr].entries = entries; + uwb_est_used++; +out: + write_unlock_irqrestore(&uwb_est_lock, flags); + return result; +} +EXPORT_SYMBOL_GPL(uwb_est_register); + + +/** + * Unregister an event size table + * + * This just removes the specified entry and moves the ones after it + * to fill in the gap. This is needed to keep the list sorted; no + * reallocation is done to reduce the size of the table. + * + * We unregister by all the data we used to register instead of by + * pointer to the @entry array because we might have used the same + * table for a bunch of IDs (for example). + * + * @returns 0 if ok, < 0 errno on error (-ENOENT if not found). + */ +int uwb_est_unregister(u8 type, u8 event_high, u16 vendor, u16 product, + const struct uwb_est_entry *entry, size_t entries) +{ + unsigned long flags; + unsigned itr; + struct uwb_est est_cmp = { + .type_event_high = type << 8 | event_high, + .vendor = vendor, + .product = product, + .entry = entry, + .entries = entries + }; + write_lock_irqsave(&uwb_est_lock, flags); + for (itr = 0; itr < uwb_est_used; itr++) + if (!memcmp(&uwb_est[itr], &est_cmp, sizeof(est_cmp))) + goto found; + write_unlock_irqrestore(&uwb_est_lock, flags); + return -ENOENT; + +found: + if (itr < uwb_est_used - 1) /* Not last one? move ones above */ + memmove(&uwb_est[itr], &uwb_est[itr+1], uwb_est_used - itr - 1); + uwb_est_used--; + write_unlock_irqrestore(&uwb_est_lock, flags); + return 0; +} +EXPORT_SYMBOL_GPL(uwb_est_unregister); + + +/** + * Get the size of an event from a table + * + * @rceb: pointer to the buffer with the event + * @rceb_size: size of the area pointed to by @rceb in bytes. + * @returns: > 0 Size of the event + * -ENOSPC An area big enough was not provided to look + * ahead into the event's guts and guess the size. + * -EINVAL Unknown event code (wEvent). + * + * This will look at the received RCEB and guess what is the total + * size. For variable sized events, it will look further ahead into + * their length field to see how much data should be read. + * + * Note this size is *not* final--the neh (Notification/Event Handle) + * might specificy an extra size to add. + */ +static +ssize_t uwb_est_get_size(struct uwb_rc *uwb_rc, struct uwb_est *est, + u8 event_low, const struct uwb_rceb *rceb, + size_t rceb_size) +{ + unsigned offset; + ssize_t size; + struct device *dev = &uwb_rc->uwb_dev.dev; + const struct uwb_est_entry *entry; + + size = -ENOENT; + if (event_low >= est->entries) { /* in range? */ + dev_err(dev, "EST %p 0x%04x/%04x/%04x[%u]: event %u out of range\n", + est, est->type_event_high, est->vendor, est->product, + est->entries, event_low); + goto out; + } + size = -ENOENT; + entry = &est->entry[event_low]; + if (entry->size == 0 && entry->offset == 0) { /* unknown? */ + dev_err(dev, "EST %p 0x%04x/%04x/%04x[%u]: event %u unknown\n", + est, est->type_event_high, est->vendor, est->product, + est->entries, event_low); + goto out; + } + offset = entry->offset; /* extra fries with that? */ + if (offset == 0) + size = entry->size; + else { + /* Ops, got an extra size field at 'offset'--read it */ + const void *ptr = rceb; + size_t type_size = 0; + offset--; + size = -ENOSPC; /* enough data for more? */ + switch (entry->type) { + case UWB_EST_16: type_size = sizeof(__le16); break; + case UWB_EST_8: type_size = sizeof(u8); break; + default: BUG(); + } + if (offset + type_size > rceb_size) { + dev_err(dev, "EST %p 0x%04x/%04x/%04x[%u]: " + "not enough data to read extra size\n", + est, est->type_event_high, est->vendor, + est->product, est->entries); + goto out; + } + size = entry->size; + ptr += offset; + switch (entry->type) { + case UWB_EST_16: size += le16_to_cpu(*(__le16 *)ptr); break; + case UWB_EST_8: size += *(u8 *)ptr; break; + default: BUG(); + } + } +out: + return size; +} + + +/** + * Guesses the size of a WA event + * + * @rceb: pointer to the buffer with the event + * @rceb_size: size of the area pointed to by @rceb in bytes. + * @returns: > 0 Size of the event + * -ENOSPC An area big enough was not provided to look + * ahead into the event's guts and guess the size. + * -EINVAL Unknown event code (wEvent). + * + * This will look at the received RCEB and guess what is the total + * size by checking all the tables registered with + * uwb_est_register(). For variable sized events, it will look further + * ahead into their length field to see how much data should be read. + * + * Note this size is *not* final--the neh (Notification/Event Handle) + * might specificy an extra size to add or replace. + */ +ssize_t uwb_est_find_size(struct uwb_rc *rc, const struct uwb_rceb *rceb, + size_t rceb_size) +{ + /* FIXME: add vendor/product data */ + ssize_t size; + struct device *dev = &rc->uwb_dev.dev; + unsigned long flags; + unsigned itr; + u16 type_event_high, event; + u8 *ptr = (u8 *) rceb; + + read_lock_irqsave(&uwb_est_lock, flags); + d_printf(2, dev, "Size query for event 0x%02x/%04x/%02x," + " buffer size %ld\n", + (unsigned) rceb->bEventType, + (unsigned) le16_to_cpu(rceb->wEvent), + (unsigned) rceb->bEventContext, + (long) rceb_size); + size = -ENOSPC; + if (rceb_size < sizeof(*rceb)) + goto out; + event = le16_to_cpu(rceb->wEvent); + type_event_high = rceb->bEventType << 8 | (event & 0xff00) >> 8; + for (itr = 0; itr < uwb_est_used; itr++) { + d_printf(3, dev, "Checking EST 0x%04x/%04x/%04x\n", + uwb_est[itr].type_event_high, uwb_est[itr].vendor, + uwb_est[itr].product); + if (uwb_est[itr].type_event_high != type_event_high) + continue; + size = uwb_est_get_size(rc, &uwb_est[itr], + event & 0x00ff, rceb, rceb_size); + /* try more tables that might handle the same type */ + if (size != -ENOENT) + goto out; + } + dev_dbg(dev, "event 0x%02x/%04x/%02x: no handlers available; " + "RCEB %02x %02x %02x %02x\n", + (unsigned) rceb->bEventType, + (unsigned) le16_to_cpu(rceb->wEvent), + (unsigned) rceb->bEventContext, + ptr[0], ptr[1], ptr[2], ptr[3]); + size = -ENOENT; +out: + read_unlock_irqrestore(&uwb_est_lock, flags); + return size; +} +EXPORT_SYMBOL_GPL(uwb_est_find_size); diff --git a/drivers/uwb/hwa-rc.c b/drivers/uwb/hwa-rc.c new file mode 100644 index 000000000000..3d26fa0f8ae1 --- /dev/null +++ b/drivers/uwb/hwa-rc.c @@ -0,0 +1,926 @@ +/* + * WUSB Host Wire Adapter: Radio Control Interface (WUSB[8.6]) + * Radio Control command/event transport + * + * Copyright (C) 2005-2006 Intel Corporation + * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + * + * + * Initialize the Radio Control interface Driver. + * + * For each device probed, creates an 'struct hwarc' which contains + * just the representation of the UWB Radio Controller, and the logic + * for reading notifications and passing them to the UWB Core. + * + * So we initialize all of those, register the UWB Radio Controller + * and setup the notification/event handle to pipe the notifications + * to the UWB management Daemon. + * + * Command and event filtering. + * + * This is the driver for the Radio Control Interface described in WUSB + * 1.0. The core UWB module assumes that all drivers are compliant to the + * WHCI 0.95 specification. We thus create a filter that parses all + * incoming messages from the (WUSB 1.0) device and manipulate them to + * conform to the WHCI 0.95 specification. Similarly, outgoing messages + * are parsed and manipulated to conform to the WUSB 1.0 compliant messages + * that the device expects. Only a few messages are affected: + * Affected events: + * UWB_RC_EVT_BEACON + * UWB_RC_EVT_BP_SLOT_CHANGE + * UWB_RC_EVT_DRP_AVAIL + * UWB_RC_EVT_DRP + * Affected commands: + * UWB_RC_CMD_SCAN + * UWB_RC_CMD_SET_DRP_IE + * + * + * + */ +#include <linux/version.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/usb.h> +#include <linux/usb/wusb.h> +#include <linux/usb/wusb-wa.h> +#include <linux/uwb.h> +#include "uwb-internal.h" +#define D_LOCAL 1 +#include <linux/uwb/debug.h> + +/* The device uses commands and events from the WHCI specification, although + * reporting itself as WUSB compliant. */ +#define WUSB_QUIRK_WHCI_CMD_EVT 0x01 + +/** + * Descriptor for an instance of the UWB Radio Control Driver that + * attaches to the RCI interface of the Host Wired Adapter. + * + * Unless there is a lock specific to the 'data members', all access + * is protected by uwb_rc->mutex. + * + * The NEEP (Notification/Event EndPoint) URB (@neep_urb) writes to + * @rd_buffer. Note there is no locking because it is perfectly (heh!) + * serialized--probe() submits an URB, callback is called, processes + * the data (synchronously), submits another URB, and so on. There is + * no concurrent access to the buffer. + */ +struct hwarc { + struct usb_device *usb_dev; + struct usb_interface *usb_iface; + struct uwb_rc *uwb_rc; /* UWB host controller */ + struct urb *neep_urb; /* Notification endpoint handling */ + struct edc neep_edc; + void *rd_buffer; /* NEEP read buffer */ +}; + + +/* Beacon received notification (WUSB 1.0 [8.6.3.2]) */ +struct uwb_rc_evt_beacon_WUSB_0100 { + struct uwb_rceb rceb; + u8 bChannelNumber; + __le16 wBPSTOffset; + u8 bLQI; + u8 bRSSI; + __le16 wBeaconInfoLength; + u8 BeaconInfo[]; +} __attribute__((packed)); + +/** + * Filter WUSB 1.0 BEACON RCV notification to be WHCI 0.95 + * + * @header: the incoming event + * @buf_size: size of buffer containing incoming event + * @new_size: size of event after filtering completed + * + * The WHCI 0.95 spec has a "Beacon Type" field. This value is unknown at + * the time we receive the beacon from WUSB so we just set it to + * UWB_RC_BEACON_TYPE_NEIGHBOR as a default. + * The solution below allocates memory upon receipt of every beacon from a + * WUSB device. This will deteriorate performance. What is the right way to + * do this? + */ +static +int hwarc_filter_evt_beacon_WUSB_0100(struct uwb_rc *rc, + struct uwb_rceb **header, + const size_t buf_size, + size_t *new_size) +{ + struct uwb_rc_evt_beacon_WUSB_0100 *be; + struct uwb_rc_evt_beacon *newbe; + size_t bytes_left, ielength; + struct device *dev = &rc->uwb_dev.dev; + + be = container_of(*header, struct uwb_rc_evt_beacon_WUSB_0100, rceb); + bytes_left = buf_size; + if (bytes_left < sizeof(*be)) { + dev_err(dev, "Beacon Received Notification: Not enough data " + "to decode for filtering (%zu vs %zu bytes needed)\n", + bytes_left, sizeof(*be)); + return -EINVAL; + } + bytes_left -= sizeof(*be); + ielength = le16_to_cpu(be->wBeaconInfoLength); + if (bytes_left < ielength) { + dev_err(dev, "Beacon Received Notification: Not enough data " + "to decode IEs (%zu vs %zu bytes needed)\n", + bytes_left, ielength); + return -EINVAL; + } + newbe = kzalloc(sizeof(*newbe) + ielength, GFP_ATOMIC); + if (newbe == NULL) + return -ENOMEM; + newbe->rceb = be->rceb; + newbe->bChannelNumber = be->bChannelNumber; + newbe->bBeaconType = UWB_RC_BEACON_TYPE_NEIGHBOR; + newbe->wBPSTOffset = be->wBPSTOffset; + newbe->bLQI = be->bLQI; + newbe->bRSSI = be->bRSSI; + newbe->wBeaconInfoLength = be->wBeaconInfoLength; + memcpy(newbe->BeaconInfo, be->BeaconInfo, ielength); + *header = &newbe->rceb; + *new_size = sizeof(*newbe) + ielength; + return 1; /* calling function will free memory */ +} + + +/* DRP Availability change notification (WUSB 1.0 [8.6.3.8]) */ +struct uwb_rc_evt_drp_avail_WUSB_0100 { + struct uwb_rceb rceb; + __le16 wIELength; + u8 IEData[]; +} __attribute__((packed)); + +/** + * Filter WUSB 1.0 DRP AVAILABILITY CHANGE notification to be WHCI 0.95 + * + * @header: the incoming event + * @buf_size: size of buffer containing incoming event + * @new_size: size of event after filtering completed + */ +static +int hwarc_filter_evt_drp_avail_WUSB_0100(struct uwb_rc *rc, + struct uwb_rceb **header, + const size_t buf_size, + size_t *new_size) +{ + struct uwb_rc_evt_drp_avail_WUSB_0100 *da; + struct uwb_rc_evt_drp_avail *newda; + struct uwb_ie_hdr *ie_hdr; + size_t bytes_left, ielength; + struct device *dev = &rc->uwb_dev.dev; + + + da = container_of(*header, struct uwb_rc_evt_drp_avail_WUSB_0100, rceb); + bytes_left = buf_size; + if (bytes_left < sizeof(*da)) { + dev_err(dev, "Not enough data to decode DRP Avail " + "Notification for filtering. Expected %zu, " + "received %zu.\n", (size_t)sizeof(*da), bytes_left); + return -EINVAL; + } + bytes_left -= sizeof(*da); + ielength = le16_to_cpu(da->wIELength); + if (bytes_left < ielength) { + dev_err(dev, "DRP Avail Notification filter: IE length " + "[%zu bytes] does not match actual length " + "[%zu bytes].\n", ielength, bytes_left); + return -EINVAL; + } + if (ielength < sizeof(*ie_hdr)) { + dev_err(dev, "DRP Avail Notification filter: Not enough " + "data to decode IE [%zu bytes, %zu needed]\n", + ielength, sizeof(*ie_hdr)); + return -EINVAL; + } + ie_hdr = (void *) da->IEData; + if (ie_hdr->length > 32) { + dev_err(dev, "DRP Availability Change event has unexpected " + "length for filtering. Expected < 32 bytes, " + "got %zu bytes.\n", (size_t)ie_hdr->length); + return -EINVAL; + } + newda = kzalloc(sizeof(*newda), GFP_ATOMIC); + if (newda == NULL) + return -ENOMEM; + newda->rceb = da->rceb; + memcpy(newda->bmp, (u8 *) ie_hdr + sizeof(*ie_hdr), ie_hdr->length); + *header = &newda->rceb; + *new_size = sizeof(*newda); + return 1; /* calling function will free memory */ +} + + +/* DRP notification (WUSB 1.0 [8.6.3.9]) */ +struct uwb_rc_evt_drp_WUSB_0100 { + struct uwb_rceb rceb; + struct uwb_dev_addr wSrcAddr; + u8 bExplicit; + __le16 wIELength; + u8 IEData[]; +} __attribute__((packed)); + +/** + * Filter WUSB 1.0 DRP Notification to be WHCI 0.95 + * + * @header: the incoming event + * @buf_size: size of buffer containing incoming event + * @new_size: size of event after filtering completed + * + * It is hard to manage DRP reservations without having a Reason code. + * Unfortunately there is none in the WUSB spec. We just set the default to + * DRP IE RECEIVED. + * We do not currently use the bBeaconSlotNumber value, so we set this to + * zero for now. + */ +static +int hwarc_filter_evt_drp_WUSB_0100(struct uwb_rc *rc, + struct uwb_rceb **header, + const size_t buf_size, + size_t *new_size) +{ + struct uwb_rc_evt_drp_WUSB_0100 *drpev; + struct uwb_rc_evt_drp *newdrpev; + size_t bytes_left, ielength; + struct device *dev = &rc->uwb_dev.dev; + + drpev = container_of(*header, struct uwb_rc_evt_drp_WUSB_0100, rceb); + bytes_left = buf_size; + if (bytes_left < sizeof(*drpev)) { + dev_err(dev, "Not enough data to decode DRP Notification " + "for filtering. Expected %zu, received %zu.\n", + (size_t)sizeof(*drpev), bytes_left); + return -EINVAL; + } + ielength = le16_to_cpu(drpev->wIELength); + bytes_left -= sizeof(*drpev); + if (bytes_left < ielength) { + dev_err(dev, "DRP Notification filter: header length [%zu " + "bytes] does not match actual length [%zu " + "bytes].\n", ielength, bytes_left); + return -EINVAL; + } + newdrpev = kzalloc(sizeof(*newdrpev) + ielength, GFP_ATOMIC); + if (newdrpev == NULL) + return -ENOMEM; + newdrpev->rceb = drpev->rceb; + newdrpev->src_addr = drpev->wSrcAddr; + newdrpev->reason = UWB_DRP_NOTIF_DRP_IE_RCVD; + newdrpev->beacon_slot_number = 0; + newdrpev->ie_length = drpev->wIELength; + memcpy(newdrpev->ie_data, drpev->IEData, ielength); + *header = &newdrpev->rceb; + *new_size = sizeof(*newdrpev) + ielength; + return 1; /* calling function will free memory */ +} + + +/* Scan Command (WUSB 1.0 [8.6.2.5]) */ +struct uwb_rc_cmd_scan_WUSB_0100 { + struct uwb_rccb rccb; + u8 bChannelNumber; + u8 bScanState; +} __attribute__((packed)); + +/** + * Filter WHCI 0.95 SCAN command to be WUSB 1.0 SCAN command + * + * @header: command sent to device (compliant to WHCI 0.95) + * @size: size of command sent to device + * + * We only reduce the size by two bytes because the WUSB 1.0 scan command + * does not have the last field (wStarttime). Also, make sure we don't send + * the device an unexpected scan type. + */ +static +int hwarc_filter_cmd_scan_WUSB_0100(struct uwb_rc *rc, + struct uwb_rccb **header, + size_t *size) +{ + struct uwb_rc_cmd_scan *sc; + + sc = container_of(*header, struct uwb_rc_cmd_scan, rccb); + + if (sc->bScanState == UWB_SCAN_ONLY_STARTTIME) + sc->bScanState = UWB_SCAN_ONLY; + /* Don't send the last two bytes. */ + *size -= 2; + return 0; +} + + +/* SET DRP IE command (WUSB 1.0 [8.6.2.7]) */ +struct uwb_rc_cmd_set_drp_ie_WUSB_0100 { + struct uwb_rccb rccb; + u8 bExplicit; + __le16 wIELength; + struct uwb_ie_drp IEData[]; +} __attribute__((packed)); + +/** + * Filter WHCI 0.95 SET DRP IE command to be WUSB 1.0 SET DRP IE command + * + * @header: command sent to device (compliant to WHCI 0.95) + * @size: size of command sent to device + * + * WUSB has an extra bExplicit field - we assume always explicit + * negotiation so this field is set. The command expected by the device is + * thus larger than the one prepared by the driver so we need to + * reallocate memory to accommodate this. + * We trust the driver to send us the correct data so no checking is done + * on incoming data - evn though it is variable length. + */ +static +int hwarc_filter_cmd_set_drp_ie_WUSB_0100(struct uwb_rc *rc, + struct uwb_rccb **header, + size_t *size) +{ + struct uwb_rc_cmd_set_drp_ie *orgcmd; + struct uwb_rc_cmd_set_drp_ie_WUSB_0100 *cmd; + size_t ielength; + + orgcmd = container_of(*header, struct uwb_rc_cmd_set_drp_ie, rccb); + ielength = le16_to_cpu(orgcmd->wIELength); + cmd = kzalloc(sizeof(*cmd) + ielength, GFP_KERNEL); + if (cmd == NULL) + return -ENOMEM; + cmd->rccb = orgcmd->rccb; + cmd->bExplicit = 0; + cmd->wIELength = orgcmd->wIELength; + memcpy(cmd->IEData, orgcmd->IEData, ielength); + *header = &cmd->rccb; + *size = sizeof(*cmd) + ielength; + return 1; /* calling function will free memory */ +} + + +/** + * Filter data from WHCI driver to WUSB device + * + * @header: WHCI 0.95 compliant command from driver + * @size: length of command + * + * The routine managing commands to the device (uwb_rc_cmd()) will call the + * filtering function pointer (if it exists) before it passes any data to + * the device. At this time the command has been formatted according to + * WHCI 0.95 and is ready to be sent to the device. + * + * The filter function will be provided with the current command and its + * length. The function will manipulate the command if necessary and + * potentially reallocate memory for a command that needed more memory that + * the given command. If new memory was created the function will return 1 + * to indicate to the calling function that the memory need to be freed + * when not needed any more. The size will contain the new length of the + * command. + * If memory has not been allocated we rely on the original mechanisms to + * free the memory of the command - even when we reduce the value of size. + */ +static +int hwarc_filter_cmd_WUSB_0100(struct uwb_rc *rc, struct uwb_rccb **header, + size_t *size) +{ + int result; + struct uwb_rccb *rccb = *header; + int cmd = le16_to_cpu(rccb->wCommand); + switch (cmd) { + case UWB_RC_CMD_SCAN: + result = hwarc_filter_cmd_scan_WUSB_0100(rc, header, size); + break; + case UWB_RC_CMD_SET_DRP_IE: + result = hwarc_filter_cmd_set_drp_ie_WUSB_0100(rc, header, size); + break; + default: + result = -ENOANO; + break; + } + return result; +} + + +/** + * Filter data from WHCI driver to WUSB device + * + * @header: WHCI 0.95 compliant command from driver + * @size: length of command + * + * Filter commands based on which protocol the device supports. The WUSB + * errata should be the same as WHCI 0.95 so we do not filter that here - + * only WUSB 1.0. + */ +static +int hwarc_filter_cmd(struct uwb_rc *rc, struct uwb_rccb **header, + size_t *size) +{ + int result = -ENOANO; + if (rc->version == 0x0100) + result = hwarc_filter_cmd_WUSB_0100(rc, header, size); + return result; +} + + +/** + * Compute return value as sum of incoming value and value at given offset + * + * @rceb: event for which we compute the size, it contains a variable + * length field. + * @core_size: size of the "non variable" part of the event + * @offset: place in event where the length of the variable part is stored + * @buf_size: total length of buffer in which event arrived - we need to make + * sure we read the offset in memory that is still part of the event + */ +static +ssize_t hwarc_get_event_size(struct uwb_rc *rc, const struct uwb_rceb *rceb, + size_t core_size, size_t offset, + const size_t buf_size) +{ + ssize_t size = -ENOSPC; + const void *ptr = rceb; + size_t type_size = sizeof(__le16); + struct device *dev = &rc->uwb_dev.dev; + + if (offset + type_size >= buf_size) { + dev_err(dev, "Not enough data to read extra size of event " + "0x%02x/%04x/%02x, only got %zu bytes.\n", + rceb->bEventType, le16_to_cpu(rceb->wEvent), + rceb->bEventContext, buf_size); + goto out; + } + ptr += offset; + size = core_size + le16_to_cpu(*(__le16 *)ptr); +out: + return size; +} + + +/* Beacon slot change notification (WUSB 1.0 [8.6.3.5]) */ +struct uwb_rc_evt_bp_slot_change_WUSB_0100 { + struct uwb_rceb rceb; + u8 bSlotNumber; +} __attribute__((packed)); + + +/** + * Filter data from WUSB device to WHCI driver + * + * @header: incoming event + * @buf_size: size of buffer in which event arrived + * @_event_size: actual size of event in the buffer + * @new_size: size of event after filtered + * + * We don't know how the buffer is constructed - there may be more than one + * event in it so buffer length does not determine event length. We first + * determine the expected size of the incoming event. This value is passed + * back only if the actual filtering succeeded (so we know the computed + * expected size is correct). This value will be zero if + * the event did not need any filtering. + * + * WHCI interprets the BP Slot Change event's data differently than + * WUSB. The event sizes are exactly the same. The data field + * indicates the new beacon slot in which a RC is transmitting its + * beacon. The maximum value of this is 96 (wMacBPLength ECMA-368 + * 17.16 (Table 117)). We thus know that the WUSB value will not set + * the bit bNoSlot, so we don't really do anything (placeholder). + */ +static +int hwarc_filter_event_WUSB_0100(struct uwb_rc *rc, struct uwb_rceb **header, + const size_t buf_size, size_t *_real_size, + size_t *_new_size) +{ + int result = -ENOANO; + struct uwb_rceb *rceb = *header; + int event = le16_to_cpu(rceb->wEvent); + size_t event_size; + size_t core_size, offset; + + if (rceb->bEventType != UWB_RC_CET_GENERAL) + goto out; + switch (event) { + case UWB_RC_EVT_BEACON: + core_size = sizeof(struct uwb_rc_evt_beacon_WUSB_0100); + offset = offsetof(struct uwb_rc_evt_beacon_WUSB_0100, + wBeaconInfoLength); + event_size = hwarc_get_event_size(rc, rceb, core_size, + offset, buf_size); + if (event_size < 0) + goto out; + *_real_size = event_size; + result = hwarc_filter_evt_beacon_WUSB_0100(rc, header, + buf_size, _new_size); + break; + case UWB_RC_EVT_BP_SLOT_CHANGE: + *_new_size = *_real_size = + sizeof(struct uwb_rc_evt_bp_slot_change_WUSB_0100); + result = 0; + break; + + case UWB_RC_EVT_DRP_AVAIL: + core_size = sizeof(struct uwb_rc_evt_drp_avail_WUSB_0100); + offset = offsetof(struct uwb_rc_evt_drp_avail_WUSB_0100, + wIELength); + event_size = hwarc_get_event_size(rc, rceb, core_size, + offset, buf_size); + if (event_size < 0) + goto out; + *_real_size = event_size; + result = hwarc_filter_evt_drp_avail_WUSB_0100( + rc, header, buf_size, _new_size); + break; + + case UWB_RC_EVT_DRP: + core_size = sizeof(struct uwb_rc_evt_drp_WUSB_0100); + offset = offsetof(struct uwb_rc_evt_drp_WUSB_0100, wIELength); + event_size = hwarc_get_event_size(rc, rceb, core_size, + offset, buf_size); + if (event_size < 0) + goto out; + *_real_size = event_size; + result = hwarc_filter_evt_drp_WUSB_0100(rc, header, + buf_size, _new_size); + break; + + default: + break; + } +out: + return result; +} + +/** + * Filter data from WUSB device to WHCI driver + * + * @header: incoming event + * @buf_size: size of buffer in which event arrived + * @_event_size: actual size of event in the buffer + * @_new_size: size of event after filtered + * + * Filter events based on which protocol the device supports. The WUSB + * errata should be the same as WHCI 0.95 so we do not filter that here - + * only WUSB 1.0. + * + * If we don't handle it, we return -ENOANO (why the weird error code? + * well, so if I get it, I can pinpoint in the code that raised + * it...after all, not too many places use the higher error codes). + */ +static +int hwarc_filter_event(struct uwb_rc *rc, struct uwb_rceb **header, + const size_t buf_size, size_t *_real_size, + size_t *_new_size) +{ + int result = -ENOANO; + if (rc->version == 0x0100) + result = hwarc_filter_event_WUSB_0100( + rc, header, buf_size, _real_size, _new_size); + return result; +} + + +/** + * Execute an UWB RC command on HWA + * + * @rc: Instance of a Radio Controller that is a HWA + * @cmd: Buffer containing the RCCB and payload to execute + * @cmd_size: Size of the command buffer. + * + * NOTE: rc's mutex has to be locked + */ +static +int hwarc_cmd(struct uwb_rc *uwb_rc, const struct uwb_rccb *cmd, size_t cmd_size) +{ + struct hwarc *hwarc = uwb_rc->priv; + return usb_control_msg( + hwarc->usb_dev, usb_sndctrlpipe(hwarc->usb_dev, 0), + WA_EXEC_RC_CMD, USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE, + 0, hwarc->usb_iface->cur_altsetting->desc.bInterfaceNumber, + (void *) cmd, cmd_size, 100 /* FIXME: this is totally arbitrary */); +} + +static +int hwarc_reset(struct uwb_rc *uwb_rc) +{ + struct hwarc *hwarc = uwb_rc->priv; + return usb_reset_device(hwarc->usb_dev); +} + +/** + * Callback for the notification and event endpoint + * + * Check's that everything is fine and then passes the read data to + * the notification/event handling mechanism (neh). + */ +static +void hwarc_neep_cb(struct urb *urb) +{ + struct hwarc *hwarc = urb->context; + struct usb_interface *usb_iface = hwarc->usb_iface; + struct device *dev = &usb_iface->dev; + int result; + + switch (result = urb->status) { + case 0: + d_printf(3, dev, "NEEP: receive stat %d, %zu bytes\n", + urb->status, (size_t)urb->actual_length); + uwb_rc_neh_grok(hwarc->uwb_rc, urb->transfer_buffer, + urb->actual_length); + break; + case -ECONNRESET: /* Not an error, but a controlled situation; */ + case -ENOENT: /* (we killed the URB)...so, no broadcast */ + d_printf(2, dev, "NEEP: URB reset/noent %d\n", urb->status); + goto out; + case -ESHUTDOWN: /* going away! */ + d_printf(2, dev, "NEEP: URB down %d\n", urb->status); + goto out; + default: /* On general errors, retry unless it gets ugly */ + if (edc_inc(&hwarc->neep_edc, EDC_MAX_ERRORS, + EDC_ERROR_TIMEFRAME)) + goto error_exceeded; + dev_err(dev, "NEEP: URB error %d\n", urb->status); + } + result = usb_submit_urb(urb, GFP_ATOMIC); + d_printf(3, dev, "NEEP: submit %d\n", result); + if (result < 0) { + dev_err(dev, "NEEP: Can't resubmit URB (%d) resetting device\n", + result); + goto error; + } +out: + return; + +error_exceeded: + dev_err(dev, "NEEP: URB max acceptable errors " + "exceeded, resetting device\n"); +error: + uwb_rc_neh_error(hwarc->uwb_rc, result); + uwb_rc_reset_all(hwarc->uwb_rc); + return; +} + +static void hwarc_init(struct hwarc *hwarc) +{ + edc_init(&hwarc->neep_edc); +} + +/** + * Initialize the notification/event endpoint stuff + * + * Note this is effectively a parallel thread; it knows that + * hwarc->uwb_rc always exists because the existence of a 'hwarc' + * means that there is a reverence on the hwarc->uwb_rc (see + * _probe()), and thus _neep_cb() can execute safely. + */ +static int hwarc_neep_init(struct uwb_rc *rc) +{ + struct hwarc *hwarc = rc->priv; + struct usb_interface *iface = hwarc->usb_iface; + struct usb_device *usb_dev = interface_to_usbdev(iface); + struct device *dev = &iface->dev; + int result; + struct usb_endpoint_descriptor *epd; + + epd = &iface->cur_altsetting->endpoint[0].desc; + hwarc->rd_buffer = (void *) __get_free_page(GFP_KERNEL); + if (hwarc->rd_buffer == NULL) { + dev_err(dev, "Unable to allocate notification's read buffer\n"); + goto error_rd_buffer; + } + hwarc->neep_urb = usb_alloc_urb(0, GFP_KERNEL); + if (hwarc->neep_urb == NULL) { + dev_err(dev, "Unable to allocate notification URB\n"); + goto error_urb_alloc; + } + usb_fill_int_urb(hwarc->neep_urb, usb_dev, + usb_rcvintpipe(usb_dev, epd->bEndpointAddress), + hwarc->rd_buffer, PAGE_SIZE, + hwarc_neep_cb, hwarc, epd->bInterval); + result = usb_submit_urb(hwarc->neep_urb, GFP_ATOMIC); + if (result < 0) { + dev_err(dev, "Cannot submit notification URB: %d\n", result); + goto error_neep_submit; + } + return 0; + +error_neep_submit: + usb_free_urb(hwarc->neep_urb); +error_urb_alloc: + free_page((unsigned long)hwarc->rd_buffer); +error_rd_buffer: + return -ENOMEM; +} + + +/** Clean up all the notification endpoint resources */ +static void hwarc_neep_release(struct uwb_rc *rc) +{ + struct hwarc *hwarc = rc->priv; + + usb_kill_urb(hwarc->neep_urb); + usb_free_urb(hwarc->neep_urb); + free_page((unsigned long)hwarc->rd_buffer); +} + +/** + * Get the version from class-specific descriptor + * + * NOTE: this descriptor comes with the big bundled configuration + * descriptor that includes the interfaces' and endpoints', so + * we just look for it in the cached copy kept by the USB stack. + * + * NOTE2: We convert LE fields to CPU order. + */ +static int hwarc_get_version(struct uwb_rc *rc) +{ + int result; + + struct hwarc *hwarc = rc->priv; + struct uwb_rc_control_intf_class_desc *descr; + struct device *dev = &rc->uwb_dev.dev; + struct usb_device *usb_dev = hwarc->usb_dev; + char *itr; + struct usb_descriptor_header *hdr; + size_t itr_size, actconfig_idx; + u16 version; + + actconfig_idx = (usb_dev->actconfig - usb_dev->config) / + sizeof(usb_dev->config[0]); + itr = usb_dev->rawdescriptors[actconfig_idx]; + itr_size = le16_to_cpu(usb_dev->actconfig->desc.wTotalLength); + while (itr_size >= sizeof(*hdr)) { + hdr = (struct usb_descriptor_header *) itr; + d_printf(3, dev, "Extra device descriptor: " + "type %02x/%u bytes @ %zu (%zu left)\n", + hdr->bDescriptorType, hdr->bLength, + (itr - usb_dev->rawdescriptors[actconfig_idx]), + itr_size); + if (hdr->bDescriptorType == USB_DT_CS_RADIO_CONTROL) + goto found; + itr += hdr->bLength; + itr_size -= hdr->bLength; + } + dev_err(dev, "cannot find Radio Control Interface Class descriptor\n"); + return -ENODEV; + +found: + result = -EINVAL; + if (hdr->bLength > itr_size) { /* is it available? */ + dev_err(dev, "incomplete Radio Control Interface Class " + "descriptor (%zu bytes left, %u needed)\n", + itr_size, hdr->bLength); + goto error; + } + if (hdr->bLength < sizeof(*descr)) { + dev_err(dev, "short Radio Control Interface Class " + "descriptor\n"); + goto error; + } + descr = (struct uwb_rc_control_intf_class_desc *) hdr; + /* Make LE fields CPU order */ + version = __le16_to_cpu(descr->bcdRCIVersion); + if (version != 0x0100) { + dev_err(dev, "Device reports protocol version 0x%04x. We " + "do not support that. \n", version); + result = -EINVAL; + goto error; + } + rc->version = version; + d_printf(3, dev, "Device supports WUSB protocol version 0x%04x \n", + rc->version); + result = 0; +error: + return result; +} + +/* + * By creating a 'uwb_rc', we have a reference on it -- that reference + * is the one we drop when we disconnect. + * + * No need to switch altsettings; according to WUSB1.0[8.6.1.1], there + * is only one altsetting allowed. + */ +static int hwarc_probe(struct usb_interface *iface, + const struct usb_device_id *id) +{ + int result; + struct uwb_rc *uwb_rc; + struct hwarc *hwarc; + struct device *dev = &iface->dev; + + result = -ENOMEM; + uwb_rc = uwb_rc_alloc(); + if (uwb_rc == NULL) { + dev_err(dev, "unable to allocate RC instance\n"); + goto error_rc_alloc; + } + hwarc = kzalloc(sizeof(*hwarc), GFP_KERNEL); + if (hwarc == NULL) { + dev_err(dev, "unable to allocate HWA RC instance\n"); + goto error_alloc; + } + hwarc_init(hwarc); + hwarc->usb_dev = usb_get_dev(interface_to_usbdev(iface)); + hwarc->usb_iface = usb_get_intf(iface); + hwarc->uwb_rc = uwb_rc; + + uwb_rc->owner = THIS_MODULE; + uwb_rc->start = hwarc_neep_init; + uwb_rc->stop = hwarc_neep_release; + uwb_rc->cmd = hwarc_cmd; + uwb_rc->reset = hwarc_reset; + if (id->driver_info & WUSB_QUIRK_WHCI_CMD_EVT) { + uwb_rc->filter_cmd = NULL; + uwb_rc->filter_event = NULL; + } else { + uwb_rc->filter_cmd = hwarc_filter_cmd; + uwb_rc->filter_event = hwarc_filter_event; + } + + result = uwb_rc_add(uwb_rc, dev, hwarc); + if (result < 0) + goto error_rc_add; + result = hwarc_get_version(uwb_rc); + if (result < 0) { + dev_err(dev, "cannot retrieve version of RC \n"); + goto error_get_version; + } + usb_set_intfdata(iface, hwarc); + return 0; + +error_get_version: + uwb_rc_rm(uwb_rc); +error_rc_add: + usb_put_intf(iface); + usb_put_dev(hwarc->usb_dev); +error_alloc: + uwb_rc_put(uwb_rc); +error_rc_alloc: + return result; +} + +static void hwarc_disconnect(struct usb_interface *iface) +{ + struct hwarc *hwarc = usb_get_intfdata(iface); + struct uwb_rc *uwb_rc = hwarc->uwb_rc; + + usb_set_intfdata(hwarc->usb_iface, NULL); + uwb_rc_rm(uwb_rc); + usb_put_intf(hwarc->usb_iface); + usb_put_dev(hwarc->usb_dev); + d_printf(1, &hwarc->usb_iface->dev, "freed hwarc %p\n", hwarc); + kfree(hwarc); + uwb_rc_put(uwb_rc); /* when creating the device, refcount = 1 */ +} + +/** USB device ID's that we handle */ +static struct usb_device_id hwarc_id_table[] = { + /* D-Link DUB-1210 */ + { USB_DEVICE_AND_INTERFACE_INFO(0x07d1, 0x3d02, 0xe0, 0x01, 0x02), + .driver_info = WUSB_QUIRK_WHCI_CMD_EVT }, + /* Intel i1480 (using firmware 1.3PA2-20070828) */ + { USB_DEVICE_AND_INTERFACE_INFO(0x8086, 0x0c3b, 0xe0, 0x01, 0x02), + .driver_info = WUSB_QUIRK_WHCI_CMD_EVT }, + /* Generic match for the Radio Control interface */ + { USB_INTERFACE_INFO(0xe0, 0x01, 0x02), }, + { }, +}; +MODULE_DEVICE_TABLE(usb, hwarc_id_table); + +static struct usb_driver hwarc_driver = { + .name = "hwa-rc", + .probe = hwarc_probe, + .disconnect = hwarc_disconnect, + .id_table = hwarc_id_table, +}; + +static int __init hwarc_driver_init(void) +{ + int result; + result = usb_register(&hwarc_driver); + if (result < 0) + printk(KERN_ERR "HWA-RC: Cannot register USB driver: %d\n", + result); + return result; + +} +module_init(hwarc_driver_init); + +static void __exit hwarc_driver_exit(void) +{ + usb_deregister(&hwarc_driver); +} +module_exit(hwarc_driver_exit); + +MODULE_AUTHOR("Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>"); +MODULE_DESCRIPTION("Host Wireless Adapter Radio Control Driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/uwb/i1480/Makefile b/drivers/uwb/i1480/Makefile new file mode 100644 index 000000000000..212bbc7d4c32 --- /dev/null +++ b/drivers/uwb/i1480/Makefile @@ -0,0 +1,2 @@ +obj-$(CONFIG_UWB_I1480U) += dfu/ i1480-est.o +obj-$(CONFIG_UWB_I1480U_WLP) += i1480u-wlp/ diff --git a/drivers/uwb/i1480/dfu/Makefile b/drivers/uwb/i1480/dfu/Makefile new file mode 100644 index 000000000000..bd1b9f25424c --- /dev/null +++ b/drivers/uwb/i1480/dfu/Makefile @@ -0,0 +1,9 @@ +obj-$(CONFIG_UWB_I1480U) += i1480-dfu-usb.o + +i1480-dfu-usb-objs := \ + dfu.o \ + mac.o \ + phy.o \ + usb.o + + diff --git a/drivers/uwb/i1480/dfu/dfu.c b/drivers/uwb/i1480/dfu/dfu.c new file mode 100644 index 000000000000..9097b3b30385 --- /dev/null +++ b/drivers/uwb/i1480/dfu/dfu.c @@ -0,0 +1,217 @@ +/* + * Intel Wireless UWB Link 1480 + * Main driver + * + * Copyright (C) 2005-2006 Intel Corporation + * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + * + * + * Common code for firmware upload used by the USB and PCI version; + * i1480_fw_upload() takes a device descriptor and uses the function + * pointers it provides to upload firmware and prepare the PHY. + * + * As well, provides common functions used by the rest of the code. + */ +#include "i1480-dfu.h" +#include <linux/errno.h> +#include <linux/delay.h> +#include <linux/pci.h> +#include <linux/device.h> +#include <linux/uwb.h> +#include <linux/random.h> + +#define D_LOCAL 0 +#include <linux/uwb/debug.h> + +/** + * i1480_rceb_check - Check RCEB for expected field values + * @i1480: pointer to device for which RCEB is being checked + * @rceb: RCEB being checked + * @cmd: which command the RCEB is related to + * @context: expected context + * @expected_type: expected event type + * @expected_event: expected event + * + * If @cmd is NULL, do not print error messages, but still return an error + * code. + * + * Return 0 if @rceb matches the expected values, -EINVAL otherwise. + */ +int i1480_rceb_check(const struct i1480 *i1480, const struct uwb_rceb *rceb, + const char *cmd, u8 context, u8 expected_type, + unsigned expected_event) +{ + int result = 0; + struct device *dev = i1480->dev; + if (rceb->bEventContext != context) { + if (cmd) + dev_err(dev, "%s: unexpected context id 0x%02x " + "(expected 0x%02x)\n", cmd, + rceb->bEventContext, context); + result = -EINVAL; + } + if (rceb->bEventType != expected_type) { + if (cmd) + dev_err(dev, "%s: unexpected event type 0x%02x " + "(expected 0x%02x)\n", cmd, + rceb->bEventType, expected_type); + result = -EINVAL; + } + if (le16_to_cpu(rceb->wEvent) != expected_event) { + if (cmd) + dev_err(dev, "%s: unexpected event 0x%04x " + "(expected 0x%04x)\n", cmd, + le16_to_cpu(rceb->wEvent), expected_event); + result = -EINVAL; + } + return result; +} +EXPORT_SYMBOL_GPL(i1480_rceb_check); + + +/** + * Execute a Radio Control Command + * + * Command data has to be in i1480->cmd_buf. + * + * @returns size of the reply data filled in i1480->evt_buf or < 0 errno + * code on error. + */ +ssize_t i1480_cmd(struct i1480 *i1480, const char *cmd_name, size_t cmd_size, + size_t reply_size) +{ + ssize_t result; + struct uwb_rceb *reply = i1480->evt_buf; + struct uwb_rccb *cmd = i1480->cmd_buf; + u16 expected_event = reply->wEvent; + u8 expected_type = reply->bEventType; + u8 context; + + d_fnstart(3, i1480->dev, "(%p, %s, %zu)\n", i1480, cmd_name, cmd_size); + init_completion(&i1480->evt_complete); + i1480->evt_result = -EINPROGRESS; + do { + get_random_bytes(&context, 1); + } while (context == 0x00 || context == 0xff); + cmd->bCommandContext = context; + result = i1480->cmd(i1480, cmd_name, cmd_size); + if (result < 0) + goto error; + /* wait for the callback to report a event was received */ + result = wait_for_completion_interruptible_timeout( + &i1480->evt_complete, HZ); + if (result == 0) { + result = -ETIMEDOUT; + goto error; + } + if (result < 0) + goto error; + result = i1480->evt_result; + if (result < 0) { + dev_err(i1480->dev, "%s: command reply reception failed: %zd\n", + cmd_name, result); + goto error; + } + /* + * Firmware versions >= 1.4.12224 for IOGear GUWA100U generate a + * spurious notification after firmware is downloaded. So check whether + * the receibed RCEB is such notification before assuming that the + * command has failed. + */ + if (i1480_rceb_check(i1480, i1480->evt_buf, NULL, + 0, 0xfd, 0x0022) == 0) { + /* Now wait for the actual RCEB for this command. */ + result = i1480->wait_init_done(i1480); + if (result < 0) + goto error; + result = i1480->evt_result; + } + if (result != reply_size) { + dev_err(i1480->dev, "%s returned only %zu bytes, %zu expected\n", + cmd_name, result, reply_size); + result = -EINVAL; + goto error; + } + /* Verify we got the right event in response */ + result = i1480_rceb_check(i1480, i1480->evt_buf, cmd_name, context, + expected_type, expected_event); +error: + d_fnend(3, i1480->dev, "(%p, %s, %zu) = %zd\n", + i1480, cmd_name, cmd_size, result); + return result; +} +EXPORT_SYMBOL_GPL(i1480_cmd); + + +static +int i1480_print_state(struct i1480 *i1480) +{ + int result; + u32 *buf = (u32 *) i1480->cmd_buf; + + result = i1480->read(i1480, 0x80080000, 2 * sizeof(*buf)); + if (result < 0) { + dev_err(i1480->dev, "cannot read U & L states: %d\n", result); + goto error; + } + dev_info(i1480->dev, "state U 0x%08x, L 0x%08x\n", buf[0], buf[1]); +error: + return result; +} + + +/* + * PCI probe, firmware uploader + * + * _mac_fw_upload() will call rc_setup(), which needs an rc_release(). + */ +int i1480_fw_upload(struct i1480 *i1480) +{ + int result; + + result = i1480_pre_fw_upload(i1480); /* PHY pre fw */ + if (result < 0 && result != -ENOENT) { + i1480_print_state(i1480); + goto error; + } + result = i1480_mac_fw_upload(i1480); /* MAC fw */ + if (result < 0) { + if (result == -ENOENT) + dev_err(i1480->dev, "Cannot locate MAC FW file '%s'\n", + i1480->mac_fw_name); + else + i1480_print_state(i1480); + goto error; + } + result = i1480_phy_fw_upload(i1480); /* PHY fw */ + if (result < 0 && result != -ENOENT) { + i1480_print_state(i1480); + goto error_rc_release; + } + /* + * FIXME: find some reliable way to check whether firmware is running + * properly. Maybe use some standard request that has no side effects? + */ + dev_info(i1480->dev, "firmware uploaded successfully\n"); +error_rc_release: + if (i1480->rc_release) + i1480->rc_release(i1480); + result = 0; +error: + return result; +} +EXPORT_SYMBOL_GPL(i1480_fw_upload); diff --git a/drivers/uwb/i1480/dfu/i1480-dfu.h b/drivers/uwb/i1480/dfu/i1480-dfu.h new file mode 100644 index 000000000000..46f45e800f36 --- /dev/null +++ b/drivers/uwb/i1480/dfu/i1480-dfu.h @@ -0,0 +1,260 @@ +/* + * i1480 Device Firmware Upload + * + * Copyright (C) 2005-2006 Intel Corporation + * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + * + * + * This driver is the firmware uploader for the Intel Wireless UWB + * Link 1480 device (both in the USB and PCI incarnations). + * + * The process is quite simple: we stop the device, write the firmware + * to its memory and then restart it. Wait for the device to let us + * know it is done booting firmware. Ready. + * + * We might have to upload before or after a phy firmware (which might + * be done in two methods, using a normal firmware image or through + * the MPI port). + * + * Because USB and PCI use common methods, we just make ops out of the + * common operations (read, write, wait_init_done and cmd) and + * implement them in usb.c and pci.c. + * + * The flow is (some parts omitted): + * + * i1480_{usb,pci}_probe() On enumerate/discovery + * i1480_fw_upload() + * i1480_pre_fw_upload() + * __mac_fw_upload() + * fw_hdrs_load() + * mac_fw_hdrs_push() + * i1480->write() [i1480_{usb,pci}_write()] + * i1480_fw_cmp() + * i1480->read() [i1480_{usb,pci}_read()] + * i1480_mac_fw_upload() + * __mac_fw_upload() + * i1480->setup(() + * i1480->wait_init_done() + * i1480_cmd_reset() + * i1480->cmd() [i1480_{usb,pci}_cmd()] + * ... + * i1480_phy_fw_upload() + * request_firmware() + * i1480_mpi_write() + * i1480->cmd() [i1480_{usb,pci}_cmd()] + * + * Once the probe function enumerates the device and uploads the + * firmware, we just exit with -ENODEV, as we don't really want to + * attach to the device. + */ +#ifndef __i1480_DFU_H__ +#define __i1480_DFU_H__ + +#include <linux/uwb/spec.h> +#include <linux/types.h> +#include <linux/completion.h> + +#define i1480_FW_UPLOAD_MODE_MASK (cpu_to_le32(0x00000018)) + +#if i1480_FW > 0x00000302 +#define i1480_RCEB_EXTENDED +#endif + +struct uwb_rccb; +struct uwb_rceb; + +/* + * Common firmware upload handlers + * + * Normally you embed this struct in another one specific to your hw. + * + * @write Write to device's memory from buffer. + * @read Read from device's memory to i1480->evt_buf. + * @setup Setup device after basic firmware is uploaded + * @wait_init_done + * Wait for the device to send a notification saying init + * is done. + * @cmd FOP for issuing the command to the hardware. The + * command data is contained in i1480->cmd_buf and the size + * is supplied as an argument. The command replied is put + * in i1480->evt_buf and the size in i1480->evt_result (or if + * an error, a < 0 errno code). + * + * @cmd_buf Memory buffer used to send commands to the device. + * Allocated by the upper layers i1480_fw_upload(). + * Size has to be @buf_size. + * @evt_buf Memory buffer used to place the async notifications + * received by the hw. Allocated by the upper layers + * i1480_fw_upload(). + * Size has to be @buf_size. + * @cmd_complete + * Low level driver uses this to notify code waiting afor + * an event that the event has arrived and data is in + * i1480->evt_buf (and size/result in i1480->evt_result). + * @hw_rev + * Use this value to activate dfu code to support new revisions + * of hardware. i1480_init() sets this to a default value. + * It should be updated by the USB and PCI code. + */ +struct i1480 { + struct device *dev; + + int (*write)(struct i1480 *, u32 addr, const void *, size_t); + int (*read)(struct i1480 *, u32 addr, size_t); + int (*rc_setup)(struct i1480 *); + void (*rc_release)(struct i1480 *); + int (*wait_init_done)(struct i1480 *); + int (*cmd)(struct i1480 *, const char *cmd_name, size_t cmd_size); + const char *pre_fw_name; + const char *mac_fw_name; + const char *mac_fw_name_deprecate; /* FIXME: Will go away */ + const char *phy_fw_name; + u8 hw_rev; + + size_t buf_size; /* size of both evt_buf and cmd_buf */ + void *evt_buf, *cmd_buf; + ssize_t evt_result; + struct completion evt_complete; +}; + +static inline +void i1480_init(struct i1480 *i1480) +{ + i1480->hw_rev = 1; + init_completion(&i1480->evt_complete); +} + +extern int i1480_fw_upload(struct i1480 *); +extern int i1480_pre_fw_upload(struct i1480 *); +extern int i1480_mac_fw_upload(struct i1480 *); +extern int i1480_phy_fw_upload(struct i1480 *); +extern ssize_t i1480_cmd(struct i1480 *, const char *, size_t, size_t); +extern int i1480_rceb_check(const struct i1480 *, + const struct uwb_rceb *, const char *, u8, + u8, unsigned); + +enum { + /* Vendor specific command type */ + i1480_CET_VS1 = 0xfd, + /* i1480 commands */ + i1480_CMD_SET_IP_MAS = 0x000e, + i1480_CMD_GET_MAC_PHY_INFO = 0x0003, + i1480_CMD_MPI_WRITE = 0x000f, + i1480_CMD_MPI_READ = 0x0010, + /* i1480 events */ +#if i1480_FW > 0x00000302 + i1480_EVT_CONFIRM = 0x0002, + i1480_EVT_RM_INIT_DONE = 0x0101, + i1480_EVT_DEV_ADD = 0x0103, + i1480_EVT_DEV_RM = 0x0104, + i1480_EVT_DEV_ID_CHANGE = 0x0105, + i1480_EVT_GET_MAC_PHY_INFO = i1480_CMD_GET_MAC_PHY_INFO, +#else + i1480_EVT_CONFIRM = 0x0002, + i1480_EVT_RM_INIT_DONE = 0x0101, + i1480_EVT_DEV_ADD = 0x0103, + i1480_EVT_DEV_RM = 0x0104, + i1480_EVT_DEV_ID_CHANGE = 0x0105, + i1480_EVT_GET_MAC_PHY_INFO = i1480_EVT_CONFIRM, +#endif +}; + + +struct i1480_evt_confirm { + struct uwb_rceb rceb; +#ifdef i1480_RCEB_EXTENDED + __le16 wParamLength; +#endif + u8 bResultCode; +} __attribute__((packed)); + + +struct i1480_rceb { + struct uwb_rceb rceb; +#ifdef i1480_RCEB_EXTENDED + __le16 wParamLength; +#endif +} __attribute__((packed)); + + +/** + * Get MAC & PHY Information confirm event structure + * + * Confirm event returned by the command. + */ +struct i1480_evt_confirm_GMPI { +#if i1480_FW > 0x00000302 + struct uwb_rceb rceb; + __le16 wParamLength; + __le16 status; + u8 mac_addr[6]; /* EUI-64 bit IEEE address [still 8 bytes?] */ + u8 dev_addr[2]; + __le16 mac_fw_rev; /* major = v >> 8; minor = v & 0xff */ + u8 hw_rev; + u8 phy_vendor; + u8 phy_rev; /* major v = >> 8; minor = v & 0xff */ + __le16 mac_caps; + u8 phy_caps[3]; + u8 key_stores; + __le16 mcast_addr_stores; + u8 sec_mode_supported; +#else + struct uwb_rceb rceb; + u8 status; + u8 mac_addr[8]; /* EUI-64 bit IEEE address [still 8 bytes?] */ + u8 dev_addr[2]; + __le16 mac_fw_rev; /* major = v >> 8; minor = v & 0xff */ + __le16 phy_fw_rev; /* major v = >> 8; minor = v & 0xff */ + __le16 mac_caps; + u8 phy_caps; + u8 key_stores; + __le16 mcast_addr_stores; + u8 sec_mode_supported; +#endif +} __attribute__((packed)); + + +struct i1480_cmd_mpi_write { + struct uwb_rccb rccb; + __le16 size; + u8 data[]; +}; + + +struct i1480_cmd_mpi_read { + struct uwb_rccb rccb; + __le16 size; + struct { + u8 page, offset; + } __attribute__((packed)) data[]; +} __attribute__((packed)); + + +struct i1480_evt_mpi_read { + struct uwb_rceb rceb; +#ifdef i1480_RCEB_EXTENDED + __le16 wParamLength; +#endif + u8 bResultCode; + __le16 size; + struct { + u8 page, offset, value; + } __attribute__((packed)) data[]; +} __attribute__((packed)); + + +#endif /* #ifndef __i1480_DFU_H__ */ diff --git a/drivers/uwb/i1480/dfu/mac.c b/drivers/uwb/i1480/dfu/mac.c new file mode 100644 index 000000000000..2e4d8f07c165 --- /dev/null +++ b/drivers/uwb/i1480/dfu/mac.c @@ -0,0 +1,527 @@ +/* + * Intel Wireless UWB Link 1480 + * MAC Firmware upload implementation + * + * Copyright (C) 2005-2006 Intel Corporation + * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + * + * + * Implementation of the code for parsing the firmware file (extract + * the headers and binary code chunks) in the fw_*() functions. The + * code to upload pre and mac firmwares is the same, so it uses a + * common entry point in __mac_fw_upload(), which uses the i1480 + * function pointers to push the firmware to the device. + */ +#include <linux/delay.h> +#include <linux/firmware.h> +#include <linux/uwb.h> +#include "i1480-dfu.h" + +#define D_LOCAL 0 +#include <linux/uwb/debug.h> + +/* + * Descriptor for a continuous segment of MAC fw data + */ +struct fw_hdr { + unsigned long address; + size_t length; + const u32 *bin; + struct fw_hdr *next; +}; + + +/* Free a chain of firmware headers */ +static +void fw_hdrs_free(struct fw_hdr *hdr) +{ + struct fw_hdr *next; + + while (hdr) { + next = hdr->next; + kfree(hdr); + hdr = next; + } +} + + +/* Fill a firmware header descriptor from a memory buffer */ +static +int fw_hdr_load(struct i1480 *i1480, struct fw_hdr *hdr, unsigned hdr_cnt, + const char *_data, const u32 *data_itr, const u32 *data_top) +{ + size_t hdr_offset = (const char *) data_itr - _data; + size_t remaining_size = (void *) data_top - (void *) data_itr; + if (data_itr + 2 > data_top) { + dev_err(i1480->dev, "fw hdr #%u/%zu: EOF reached in header at " + "offset %zu, limit %zu\n", + hdr_cnt, hdr_offset, + (const char *) data_itr + 2 - _data, + (const char *) data_top - _data); + return -EINVAL; + } + hdr->next = NULL; + hdr->address = le32_to_cpu(*data_itr++); + hdr->length = le32_to_cpu(*data_itr++); + hdr->bin = data_itr; + if (hdr->length > remaining_size) { + dev_err(i1480->dev, "fw hdr #%u/%zu: EOF reached in data; " + "chunk too long (%zu bytes), only %zu left\n", + hdr_cnt, hdr_offset, hdr->length, remaining_size); + return -EINVAL; + } + return 0; +} + + +/** + * Get a buffer where the firmware is supposed to be and create a + * chain of headers linking them together. + * + * @phdr: where to place the pointer to the first header (headers link + * to the next via the @hdr->next ptr); need to free the whole + * chain when done. + * + * @_data: Pointer to the data buffer. + * + * @_data_size: Size of the data buffer (bytes); data size has to be a + * multiple of 4. Function will fail if not. + * + * Goes over the whole binary blob; reads the first chunk and creates + * a fw hdr from it (which points to where the data is in @_data and + * the length of the chunk); then goes on to the next chunk until + * done. Each header is linked to the next. + */ +static +int fw_hdrs_load(struct i1480 *i1480, struct fw_hdr **phdr, + const char *_data, size_t data_size) +{ + int result; + unsigned hdr_cnt = 0; + u32 *data = (u32 *) _data, *data_itr, *data_top; + struct fw_hdr *hdr, **prev_hdr = phdr; + + result = -EINVAL; + /* Check size is ok and pointer is aligned */ + if (data_size % sizeof(u32) != 0) + goto error; + if ((unsigned long) _data % sizeof(u16) != 0) + goto error; + *phdr = NULL; + data_itr = data; + data_top = (u32 *) (_data + data_size); + while (data_itr < data_top) { + result = -ENOMEM; + hdr = kmalloc(sizeof(*hdr), GFP_KERNEL); + if (hdr == NULL) { + dev_err(i1480->dev, "Cannot allocate fw header " + "for chunk #%u\n", hdr_cnt); + goto error_alloc; + } + result = fw_hdr_load(i1480, hdr, hdr_cnt, + _data, data_itr, data_top); + if (result < 0) + goto error_load; + data_itr += 2 + hdr->length; + *prev_hdr = hdr; + prev_hdr = &hdr->next; + hdr_cnt++; + }; + *prev_hdr = NULL; + return 0; + +error_load: + kfree(hdr); +error_alloc: + fw_hdrs_free(*phdr); +error: + return result; +} + + +/** + * Compares a chunk of fw with one in the devices's memory + * + * @i1480: Device instance + * @hdr: Pointer to the firmware chunk + * @returns: 0 if equal, < 0 errno on error. If > 0, it is the offset + * where the difference was found (plus one). + * + * Kind of dirty and simplistic, but does the trick in both the PCI + * and USB version. We do a quick[er] memcmp(), and if it fails, we do + * a byte-by-byte to find the offset. + */ +static +ssize_t i1480_fw_cmp(struct i1480 *i1480, struct fw_hdr *hdr) +{ + ssize_t result = 0; + u32 src_itr = 0, cnt; + size_t size = hdr->length*sizeof(hdr->bin[0]); + size_t chunk_size; + u8 *bin = (u8 *) hdr->bin; + + while (size > 0) { + chunk_size = size < i1480->buf_size ? size : i1480->buf_size; + result = i1480->read(i1480, hdr->address + src_itr, chunk_size); + if (result < 0) { + dev_err(i1480->dev, "error reading for verification: " + "%zd\n", result); + goto error; + } + if (memcmp(i1480->cmd_buf, bin + src_itr, result)) { + u8 *buf = i1480->cmd_buf; + d_printf(2, i1480->dev, + "original data @ %p + %u, %zu bytes\n", + bin, src_itr, result); + d_dump(4, i1480->dev, bin + src_itr, result); + for (cnt = 0; cnt < result; cnt++) + if (bin[src_itr + cnt] != buf[cnt]) { + dev_err(i1480->dev, "byte failed at " + "src_itr %u cnt %u [0x%02x " + "vs 0x%02x]\n", src_itr, cnt, + bin[src_itr + cnt], buf[cnt]); + result = src_itr + cnt + 1; + goto cmp_failed; + } + } + src_itr += result; + size -= result; + } + result = 0; +error: +cmp_failed: + return result; +} + + +/** + * Writes firmware headers to the device. + * + * @prd: PRD instance + * @hdr: Processed firmware + * @returns: 0 if ok, < 0 errno on error. + */ +static +int mac_fw_hdrs_push(struct i1480 *i1480, struct fw_hdr *hdr, + const char *fw_name, const char *fw_tag) +{ + struct device *dev = i1480->dev; + ssize_t result = 0; + struct fw_hdr *hdr_itr; + int verif_retry_count; + + d_fnstart(3, dev, "(%p, %p)\n", i1480, hdr); + /* Now, header by header, push them to the hw */ + for (hdr_itr = hdr; hdr_itr != NULL; hdr_itr = hdr_itr->next) { + verif_retry_count = 0; +retry: + dev_dbg(dev, "fw chunk (%zu @ 0x%08lx)\n", + hdr_itr->length * sizeof(hdr_itr->bin[0]), + hdr_itr->address); + result = i1480->write(i1480, hdr_itr->address, hdr_itr->bin, + hdr_itr->length*sizeof(hdr_itr->bin[0])); + if (result < 0) { + dev_err(dev, "%s fw '%s': write failed (%zuB @ 0x%lx):" + " %zd\n", fw_tag, fw_name, + hdr_itr->length * sizeof(hdr_itr->bin[0]), + hdr_itr->address, result); + break; + } + result = i1480_fw_cmp(i1480, hdr_itr); + if (result < 0) { + dev_err(dev, "%s fw '%s': verification read " + "failed (%zuB @ 0x%lx): %zd\n", + fw_tag, fw_name, + hdr_itr->length * sizeof(hdr_itr->bin[0]), + hdr_itr->address, result); + break; + } + if (result > 0) { /* Offset where it failed + 1 */ + result--; + dev_err(dev, "%s fw '%s': WARNING: verification " + "failed at 0x%lx: retrying\n", + fw_tag, fw_name, hdr_itr->address + result); + if (++verif_retry_count < 3) + goto retry; /* write this block again! */ + dev_err(dev, "%s fw '%s': verification failed at 0x%lx: " + "tried %d times\n", fw_tag, fw_name, + hdr_itr->address + result, verif_retry_count); + result = -EINVAL; + break; + } + } + d_fnend(3, dev, "(%zd)\n", result); + return result; +} + + +/** Puts the device in firmware upload mode.*/ +static +int mac_fw_upload_enable(struct i1480 *i1480) +{ + int result; + u32 reg = 0x800000c0; + u32 *buffer = (u32 *)i1480->cmd_buf; + + if (i1480->hw_rev > 1) + reg = 0x8000d0d4; + result = i1480->read(i1480, reg, sizeof(u32)); + if (result < 0) + goto error_cmd; + *buffer &= ~i1480_FW_UPLOAD_MODE_MASK; + result = i1480->write(i1480, reg, buffer, sizeof(u32)); + if (result < 0) + goto error_cmd; + return 0; +error_cmd: + dev_err(i1480->dev, "can't enable fw upload mode: %d\n", result); + return result; +} + + +/** Gets the device out of firmware upload mode. */ +static +int mac_fw_upload_disable(struct i1480 *i1480) +{ + int result; + u32 reg = 0x800000c0; + u32 *buffer = (u32 *)i1480->cmd_buf; + + if (i1480->hw_rev > 1) + reg = 0x8000d0d4; + result = i1480->read(i1480, reg, sizeof(u32)); + if (result < 0) + goto error_cmd; + *buffer |= i1480_FW_UPLOAD_MODE_MASK; + result = i1480->write(i1480, reg, buffer, sizeof(u32)); + if (result < 0) + goto error_cmd; + return 0; +error_cmd: + dev_err(i1480->dev, "can't disable fw upload mode: %d\n", result); + return result; +} + + + +/** + * Generic function for uploading a MAC firmware. + * + * @i1480: Device instance + * @fw_name: Name of firmware file to upload. + * @fw_tag: Name of the firmware type (for messages) + * [eg: MAC, PRE] + * @do_wait: Wait for device to emit initialization done message (0 + * for PRE fws, 1 for MAC fws). + * @returns: 0 if ok, < 0 errno on error. + */ +static +int __mac_fw_upload(struct i1480 *i1480, const char *fw_name, + const char *fw_tag) +{ + int result; + const struct firmware *fw; + struct fw_hdr *fw_hdrs; + + d_fnstart(3, i1480->dev, "(%p, %s, %s)\n", i1480, fw_name, fw_tag); + result = request_firmware(&fw, fw_name, i1480->dev); + if (result < 0) /* Up to caller to complain on -ENOENT */ + goto out; + d_printf(3, i1480->dev, "%s fw '%s': uploading\n", fw_tag, fw_name); + result = fw_hdrs_load(i1480, &fw_hdrs, fw->data, fw->size); + if (result < 0) { + dev_err(i1480->dev, "%s fw '%s': failed to parse firmware " + "file: %d\n", fw_tag, fw_name, result); + goto out_release; + } + result = mac_fw_upload_enable(i1480); + if (result < 0) + goto out_hdrs_release; + result = mac_fw_hdrs_push(i1480, fw_hdrs, fw_name, fw_tag); + mac_fw_upload_disable(i1480); +out_hdrs_release: + if (result >= 0) + dev_info(i1480->dev, "%s fw '%s': uploaded\n", fw_tag, fw_name); + else + dev_err(i1480->dev, "%s fw '%s': failed to upload (%d), " + "power cycle device\n", fw_tag, fw_name, result); + fw_hdrs_free(fw_hdrs); +out_release: + release_firmware(fw); +out: + d_fnend(3, i1480->dev, "(%p, %s, %s) = %d\n", i1480, fw_name, fw_tag, + result); + return result; +} + + +/** + * Upload a pre-PHY firmware + * + */ +int i1480_pre_fw_upload(struct i1480 *i1480) +{ + int result; + result = __mac_fw_upload(i1480, i1480->pre_fw_name, "PRE"); + if (result == 0) + msleep(400); + return result; +} + + +/** + * Reset a the MAC and PHY + * + * @i1480: Device's instance + * @returns: 0 if ok, < 0 errno code on error + * + * We put the command on kmalloc'ed memory as some arches cannot do + * USB from the stack. The reply event is copied from an stage buffer, + * so it can be in the stack. See WUSB1.0[8.6.2.4] for more details. + * + * We issue the reset to make sure the UWB controller reinits the PHY; + * this way we can now if the PHY init went ok. + */ +static +int i1480_cmd_reset(struct i1480 *i1480) +{ + int result; + struct uwb_rccb *cmd = (void *) i1480->cmd_buf; + struct i1480_evt_reset { + struct uwb_rceb rceb; + u8 bResultCode; + } __attribute__((packed)) *reply = (void *) i1480->evt_buf; + + result = -ENOMEM; + cmd->bCommandType = UWB_RC_CET_GENERAL; + cmd->wCommand = cpu_to_le16(UWB_RC_CMD_RESET); + reply->rceb.bEventType = UWB_RC_CET_GENERAL; + reply->rceb.wEvent = UWB_RC_CMD_RESET; + result = i1480_cmd(i1480, "RESET", sizeof(*cmd), sizeof(*reply)); + if (result < 0) + goto out; + if (reply->bResultCode != UWB_RC_RES_SUCCESS) { + dev_err(i1480->dev, "RESET: command execution failed: %u\n", + reply->bResultCode); + result = -EIO; + } +out: + return result; + +} + + +/* Wait for the MAC FW to start running */ +static +int i1480_fw_is_running_q(struct i1480 *i1480) +{ + int cnt = 0; + int result; + u32 *val = (u32 *) i1480->cmd_buf; + + d_fnstart(3, i1480->dev, "(i1480 %p)\n", i1480); + for (cnt = 0; cnt < 10; cnt++) { + msleep(100); + result = i1480->read(i1480, 0x80080000, 4); + if (result < 0) { + dev_err(i1480->dev, "Can't read 0x8008000: %d\n", result); + goto out; + } + if (*val == 0x55555555UL) /* fw running? cool */ + goto out; + } + dev_err(i1480->dev, "Timed out waiting for fw to start\n"); + result = -ETIMEDOUT; +out: + d_fnend(3, i1480->dev, "(i1480 %p) = %d\n", i1480, result); + return result; + +} + + +/** + * Upload MAC firmware, wait for it to start + * + * @i1480: Device instance + * @fw_name: Name of the file that contains the firmware + * + * This has to be called after the pre fw has been uploaded (if + * there is any). + */ +int i1480_mac_fw_upload(struct i1480 *i1480) +{ + int result = 0, deprecated_name = 0; + struct i1480_rceb *rcebe = (void *) i1480->evt_buf; + + d_fnstart(3, i1480->dev, "(%p)\n", i1480); + result = __mac_fw_upload(i1480, i1480->mac_fw_name, "MAC"); + if (result == -ENOENT) { + result = __mac_fw_upload(i1480, i1480->mac_fw_name_deprecate, + "MAC"); + deprecated_name = 1; + } + if (result < 0) + return result; + if (deprecated_name == 1) + dev_warn(i1480->dev, + "WARNING: firmware file name %s is deprecated, " + "please rename to %s\n", + i1480->mac_fw_name_deprecate, i1480->mac_fw_name); + result = i1480_fw_is_running_q(i1480); + if (result < 0) + goto error_fw_not_running; + result = i1480->rc_setup ? i1480->rc_setup(i1480) : 0; + if (result < 0) { + dev_err(i1480->dev, "Cannot setup after MAC fw upload: %d\n", + result); + goto error_setup; + } + result = i1480->wait_init_done(i1480); /* wait init'on */ + if (result < 0) { + dev_err(i1480->dev, "MAC fw '%s': Initialization timed out " + "(%d)\n", i1480->mac_fw_name, result); + goto error_init_timeout; + } + /* verify we got the right initialization done event */ + if (i1480->evt_result != sizeof(*rcebe)) { + dev_err(i1480->dev, "MAC fw '%s': initialization event returns " + "wrong size (%zu bytes vs %zu needed)\n", + i1480->mac_fw_name, i1480->evt_result, sizeof(*rcebe)); + dump_bytes(i1480->dev, rcebe, min(i1480->evt_result, (ssize_t)32)); + goto error_size; + } + result = -EIO; + if (i1480_rceb_check(i1480, &rcebe->rceb, NULL, 0, i1480_CET_VS1, + i1480_EVT_RM_INIT_DONE) < 0) { + dev_err(i1480->dev, "wrong initialization event 0x%02x/%04x/%02x " + "received; expected 0x%02x/%04x/00\n", + rcebe->rceb.bEventType, le16_to_cpu(rcebe->rceb.wEvent), + rcebe->rceb.bEventContext, i1480_CET_VS1, + i1480_EVT_RM_INIT_DONE); + goto error_init_timeout; + } + result = i1480_cmd_reset(i1480); + if (result < 0) + dev_err(i1480->dev, "MAC fw '%s': MBOA reset failed (%d)\n", + i1480->mac_fw_name, result); +error_fw_not_running: +error_init_timeout: +error_size: +error_setup: + d_fnend(3, i1480->dev, "(i1480 %p) = %d\n", i1480, result); + return result; +} diff --git a/drivers/uwb/i1480/dfu/phy.c b/drivers/uwb/i1480/dfu/phy.c new file mode 100644 index 000000000000..3b1a87de8e63 --- /dev/null +++ b/drivers/uwb/i1480/dfu/phy.c @@ -0,0 +1,203 @@ +/* + * Intel Wireless UWB Link 1480 + * PHY parameters upload + * + * Copyright (C) 2005-2006 Intel Corporation + * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + * + * + * Code for uploading the PHY parameters to the PHY through the UWB + * Radio Control interface. + * + * We just send the data through the MPI interface using HWA-like + * commands and then reset the PHY to make sure it is ok. + */ +#include <linux/delay.h> +#include <linux/device.h> +#include <linux/firmware.h> +#include <linux/usb/wusb.h> +#include "i1480-dfu.h" + + +/** + * Write a value array to an address of the MPI interface + * + * @i1480: Device descriptor + * @data: Data array to write + * @size: Size of the data array + * @returns: 0 if ok, < 0 errno code on error. + * + * The data array is organized into pairs: + * + * ADDRESS VALUE + * + * ADDRESS is BE 16 bit unsigned, VALUE 8 bit unsigned. Size thus has + * to be a multiple of three. + */ +static +int i1480_mpi_write(struct i1480 *i1480, const void *data, size_t size) +{ + int result; + struct i1480_cmd_mpi_write *cmd = i1480->cmd_buf; + struct i1480_evt_confirm *reply = i1480->evt_buf; + + BUG_ON(size > 480); + result = -ENOMEM; + cmd->rccb.bCommandType = i1480_CET_VS1; + cmd->rccb.wCommand = cpu_to_le16(i1480_CMD_MPI_WRITE); + cmd->size = cpu_to_le16(size); + memcpy(cmd->data, data, size); + reply->rceb.bEventType = i1480_CET_VS1; + reply->rceb.wEvent = i1480_CMD_MPI_WRITE; + result = i1480_cmd(i1480, "MPI-WRITE", sizeof(*cmd) + size, sizeof(*reply)); + if (result < 0) + goto out; + if (reply->bResultCode != UWB_RC_RES_SUCCESS) { + dev_err(i1480->dev, "MPI-WRITE: command execution failed: %d\n", + reply->bResultCode); + result = -EIO; + } +out: + return result; +} + + +/** + * Read a value array to from an address of the MPI interface + * + * @i1480: Device descriptor + * @data: where to place the read array + * @srcaddr: Where to read from + * @size: Size of the data read array + * @returns: 0 if ok, < 0 errno code on error. + * + * The command data array is organized into pairs ADDR0 ADDR1..., and + * the returned data in ADDR0 VALUE0 ADDR1 VALUE1... + * + * We generate the command array to be a sequential read and then + * rearrange the result. + * + * We use the i1480->cmd_buf for the command, i1480->evt_buf for the reply. + * + * As the reply has to fit in 512 bytes (i1480->evt_buffer), the max amount + * of values we can read is (512 - sizeof(*reply)) / 3 + */ +static +int i1480_mpi_read(struct i1480 *i1480, u8 *data, u16 srcaddr, size_t size) +{ + int result; + struct i1480_cmd_mpi_read *cmd = i1480->cmd_buf; + struct i1480_evt_mpi_read *reply = i1480->evt_buf; + unsigned cnt; + + memset(i1480->cmd_buf, 0x69, 512); + memset(i1480->evt_buf, 0x69, 512); + + BUG_ON(size > (i1480->buf_size - sizeof(*reply)) / 3); + result = -ENOMEM; + cmd->rccb.bCommandType = i1480_CET_VS1; + cmd->rccb.wCommand = cpu_to_le16(i1480_CMD_MPI_READ); + cmd->size = cpu_to_le16(3*size); + for (cnt = 0; cnt < size; cnt++) { + cmd->data[cnt].page = (srcaddr + cnt) >> 8; + cmd->data[cnt].offset = (srcaddr + cnt) & 0xff; + } + reply->rceb.bEventType = i1480_CET_VS1; + reply->rceb.wEvent = i1480_CMD_MPI_READ; + result = i1480_cmd(i1480, "MPI-READ", sizeof(*cmd) + 2*size, + sizeof(*reply) + 3*size); + if (result < 0) + goto out; + if (reply->bResultCode != UWB_RC_RES_SUCCESS) { + dev_err(i1480->dev, "MPI-READ: command execution failed: %d\n", + reply->bResultCode); + result = -EIO; + } + for (cnt = 0; cnt < size; cnt++) { + if (reply->data[cnt].page != (srcaddr + cnt) >> 8) + dev_err(i1480->dev, "MPI-READ: page inconsistency at " + "index %u: expected 0x%02x, got 0x%02x\n", cnt, + (srcaddr + cnt) >> 8, reply->data[cnt].page); + if (reply->data[cnt].offset != ((srcaddr + cnt) & 0x00ff)) + dev_err(i1480->dev, "MPI-READ: offset inconsistency at " + "index %u: expected 0x%02x, got 0x%02x\n", cnt, + (srcaddr + cnt) & 0x00ff, + reply->data[cnt].offset); + data[cnt] = reply->data[cnt].value; + } + result = 0; +out: + return result; +} + + +/** + * Upload a PHY firmware, wait for it to start + * + * @i1480: Device instance + * @fw_name: Name of the file that contains the firmware + * + * We assume the MAC fw is up and running. This means we can use the + * MPI interface to write the PHY firmware. Once done, we issue an + * MBOA Reset, which will force the MAC to reset and reinitialize the + * PHY. If that works, we are ready to go. + * + * Max packet size for the MPI write is 512, so the max buffer is 480 + * (which gives us 160 byte triads of MSB, LSB and VAL for the data). + */ +int i1480_phy_fw_upload(struct i1480 *i1480) +{ + int result; + const struct firmware *fw; + const char *data_itr, *data_top; + const size_t MAX_BLK_SIZE = 480; /* 160 triads */ + size_t data_size; + u8 phy_stat; + + result = request_firmware(&fw, i1480->phy_fw_name, i1480->dev); + if (result < 0) + goto out; + /* Loop writing data in chunks as big as possible until done. */ + for (data_itr = fw->data, data_top = data_itr + fw->size; + data_itr < data_top; data_itr += MAX_BLK_SIZE) { + data_size = min(MAX_BLK_SIZE, (size_t) (data_top - data_itr)); + result = i1480_mpi_write(i1480, data_itr, data_size); + if (result < 0) + goto error_mpi_write; + } + /* Read MPI page 0, offset 6; if 0, PHY was initialized correctly. */ + result = i1480_mpi_read(i1480, &phy_stat, 0x0006, 1); + if (result < 0) { + dev_err(i1480->dev, "PHY: can't get status: %d\n", result); + goto error_mpi_status; + } + if (phy_stat != 0) { + result = -ENODEV; + dev_info(i1480->dev, "error, PHY not ready: %u\n", phy_stat); + goto error_phy_status; + } + dev_info(i1480->dev, "PHY fw '%s': uploaded\n", i1480->phy_fw_name); +error_phy_status: +error_mpi_status: +error_mpi_write: + release_firmware(fw); + if (result < 0) + dev_err(i1480->dev, "PHY fw '%s': failed to upload (%d), " + "power cycle device\n", i1480->phy_fw_name, result); +out: + return result; +} diff --git a/drivers/uwb/i1480/dfu/usb.c b/drivers/uwb/i1480/dfu/usb.c new file mode 100644 index 000000000000..98eeeff051aa --- /dev/null +++ b/drivers/uwb/i1480/dfu/usb.c @@ -0,0 +1,500 @@ +/* + * Intel Wireless UWB Link 1480 + * USB SKU firmware upload implementation + * + * Copyright (C) 2005-2006 Intel Corporation + * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + * + * + * This driver will prepare the i1480 device to behave as a real + * Wireless USB HWA adaptor by uploading the firmware. + * + * When the device is connected or driver is loaded, i1480_usb_probe() + * is called--this will allocate and initialize the device structure, + * fill in the pointers to the common functions (read, write, + * wait_init_done and cmd for HWA command execution) and once that is + * done, call the common firmware uploading routine. Then clean up and + * return -ENODEV, as we don't attach to the device. + * + * The rest are the basic ops we implement that the fw upload code + * uses to do its job. All the ops in the common code are i1480->NAME, + * the functions are i1480_usb_NAME(). + */ +#include <linux/module.h> +#include <linux/version.h> +#include <linux/usb.h> +#include <linux/interrupt.h> +#include <linux/delay.h> +#include <linux/uwb.h> +#include <linux/usb/wusb.h> +#include <linux/usb/wusb-wa.h> +#include "i1480-dfu.h" + +#define D_LOCAL 0 +#include <linux/uwb/debug.h> + + +struct i1480_usb { + struct i1480 i1480; + struct usb_device *usb_dev; + struct usb_interface *usb_iface; + struct urb *neep_urb; /* URB for reading from EP1 */ +}; + + +static +void i1480_usb_init(struct i1480_usb *i1480_usb) +{ + i1480_init(&i1480_usb->i1480); +} + + +static +int i1480_usb_create(struct i1480_usb *i1480_usb, struct usb_interface *iface) +{ + struct usb_device *usb_dev = interface_to_usbdev(iface); + int result = -ENOMEM; + + i1480_usb->usb_dev = usb_get_dev(usb_dev); /* bind the USB device */ + i1480_usb->usb_iface = usb_get_intf(iface); + usb_set_intfdata(iface, i1480_usb); /* Bind the driver to iface0 */ + i1480_usb->neep_urb = usb_alloc_urb(0, GFP_KERNEL); + if (i1480_usb->neep_urb == NULL) + goto error; + return 0; + +error: + usb_set_intfdata(iface, NULL); + usb_put_intf(iface); + usb_put_dev(usb_dev); + return result; +} + + +static +void i1480_usb_destroy(struct i1480_usb *i1480_usb) +{ + usb_kill_urb(i1480_usb->neep_urb); + usb_free_urb(i1480_usb->neep_urb); + usb_set_intfdata(i1480_usb->usb_iface, NULL); + usb_put_intf(i1480_usb->usb_iface); + usb_put_dev(i1480_usb->usb_dev); +} + + +/** + * Write a buffer to a memory address in the i1480 device + * + * @i1480: i1480 instance + * @memory_address: + * Address where to write the data buffer to. + * @buffer: Buffer to the data + * @size: Size of the buffer [has to be < 512]. + * @returns: 0 if ok, < 0 errno code on error. + * + * Data buffers to USB cannot be on the stack or in vmalloc'ed areas, + * so we copy it to the local i1480 buffer before proceeding. In any + * case, we have a max size we can send, soooo. + */ +static +int i1480_usb_write(struct i1480 *i1480, u32 memory_address, + const void *buffer, size_t size) +{ + int result = 0; + struct i1480_usb *i1480_usb = container_of(i1480, struct i1480_usb, i1480); + size_t buffer_size, itr = 0; + + d_fnstart(3, i1480->dev, "(%p, 0x%08x, %p, %zu)\n", + i1480, memory_address, buffer, size); + BUG_ON(size & 0x3); /* Needs to be a multiple of 4 */ + while (size > 0) { + buffer_size = size < i1480->buf_size ? size : i1480->buf_size; + memcpy(i1480->cmd_buf, buffer + itr, buffer_size); + result = usb_control_msg( + i1480_usb->usb_dev, usb_sndctrlpipe(i1480_usb->usb_dev, 0), + 0xf0, USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, + cpu_to_le16(memory_address & 0xffff), + cpu_to_le16((memory_address >> 16) & 0xffff), + i1480->cmd_buf, buffer_size, 100 /* FIXME: arbitrary */); + if (result < 0) + break; + d_printf(3, i1480->dev, + "wrote @ 0x%08x %u bytes (of %zu bytes requested)\n", + memory_address, result, buffer_size); + d_dump(4, i1480->dev, i1480->cmd_buf, result); + itr += result; + memory_address += result; + size -= result; + } + d_fnend(3, i1480->dev, "(%p, 0x%08x, %p, %zu) = %d\n", + i1480, memory_address, buffer, size, result); + return result; +} + + +/** + * Read a block [max size 512] of the device's memory to @i1480's buffer. + * + * @i1480: i1480 instance + * @memory_address: + * Address where to read from. + * @size: Size to read. Smaller than or equal to 512. + * @returns: >= 0 number of bytes written if ok, < 0 errno code on error. + * + * NOTE: if the memory address or block is incorrect, you might get a + * stall or a different memory read. Caller has to verify the + * memory address and size passed back in the @neh structure. + */ +static +int i1480_usb_read(struct i1480 *i1480, u32 addr, size_t size) +{ + ssize_t result = 0, bytes = 0; + size_t itr, read_size = i1480->buf_size; + struct i1480_usb *i1480_usb = container_of(i1480, struct i1480_usb, i1480); + + d_fnstart(3, i1480->dev, "(%p, 0x%08x, %zu)\n", + i1480, addr, size); + BUG_ON(size > i1480->buf_size); + BUG_ON(size & 0x3); /* Needs to be a multiple of 4 */ + BUG_ON(read_size > 512); + + if (addr >= 0x8000d200 && addr < 0x8000d400) /* Yeah, HW quirk */ + read_size = 4; + + for (itr = 0; itr < size; itr += read_size) { + size_t itr_addr = addr + itr; + size_t itr_size = min(read_size, size - itr); + result = usb_control_msg( + i1480_usb->usb_dev, usb_rcvctrlpipe(i1480_usb->usb_dev, 0), + 0xf0, USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, + cpu_to_le16(itr_addr & 0xffff), + cpu_to_le16((itr_addr >> 16) & 0xffff), + i1480->cmd_buf + itr, itr_size, + 100 /* FIXME: arbitrary */); + if (result < 0) { + dev_err(i1480->dev, "%s: USB read error: %zd\n", + __func__, result); + goto out; + } + if (result != itr_size) { + result = -EIO; + dev_err(i1480->dev, + "%s: partial read got only %zu bytes vs %zu expected\n", + __func__, result, itr_size); + goto out; + } + bytes += result; + } + result = bytes; +out: + d_fnend(3, i1480->dev, "(%p, 0x%08x, %zu) = %zd\n", + i1480, addr, size, result); + if (result > 0) + d_dump(4, i1480->dev, i1480->cmd_buf, result); + return result; +} + + +/** + * Callback for reads on the notification/event endpoint + * + * Just enables the completion read handler. + */ +static +void i1480_usb_neep_cb(struct urb *urb) +{ + struct i1480 *i1480 = urb->context; + struct device *dev = i1480->dev; + + switch (urb->status) { + case 0: + break; + case -ECONNRESET: /* Not an error, but a controlled situation; */ + case -ENOENT: /* (we killed the URB)...so, no broadcast */ + dev_dbg(dev, "NEEP: reset/noent %d\n", urb->status); + break; + case -ESHUTDOWN: /* going away! */ + dev_dbg(dev, "NEEP: down %d\n", urb->status); + break; + default: + dev_err(dev, "NEEP: unknown status %d\n", urb->status); + break; + } + i1480->evt_result = urb->actual_length; + complete(&i1480->evt_complete); + return; +} + + +/** + * Wait for the MAC FW to initialize + * + * MAC FW sends a 0xfd/0101/00 notification to EP1 when done + * initializing. Get that notification into i1480->evt_buf; upper layer + * will verify it. + * + * Set i1480->evt_result with the result of getting the event or its + * size (if succesful). + * + * Delivers the data directly to i1480->evt_buf + */ +static +int i1480_usb_wait_init_done(struct i1480 *i1480) +{ + int result; + struct device *dev = i1480->dev; + struct i1480_usb *i1480_usb = container_of(i1480, struct i1480_usb, i1480); + struct usb_endpoint_descriptor *epd; + + d_fnstart(3, dev, "(%p)\n", i1480); + init_completion(&i1480->evt_complete); + i1480->evt_result = -EINPROGRESS; + epd = &i1480_usb->usb_iface->cur_altsetting->endpoint[0].desc; + usb_fill_int_urb(i1480_usb->neep_urb, i1480_usb->usb_dev, + usb_rcvintpipe(i1480_usb->usb_dev, epd->bEndpointAddress), + i1480->evt_buf, i1480->buf_size, + i1480_usb_neep_cb, i1480, epd->bInterval); + result = usb_submit_urb(i1480_usb->neep_urb, GFP_KERNEL); + if (result < 0) { + dev_err(dev, "init done: cannot submit NEEP read: %d\n", + result); + goto error_submit; + } + /* Wait for the USB callback to get the data */ + result = wait_for_completion_interruptible_timeout( + &i1480->evt_complete, HZ); + if (result <= 0) { + result = result == 0 ? -ETIMEDOUT : result; + goto error_wait; + } + usb_kill_urb(i1480_usb->neep_urb); + d_fnend(3, dev, "(%p) = 0\n", i1480); + return 0; + +error_wait: + usb_kill_urb(i1480_usb->neep_urb); +error_submit: + i1480->evt_result = result; + d_fnend(3, dev, "(%p) = %d\n", i1480, result); + return result; +} + + +/** + * Generic function for issuing commands to the i1480 + * + * @i1480: i1480 instance + * @cmd_name: Name of the command (for error messages) + * @cmd: Pointer to command buffer + * @cmd_size: Size of the command buffer + * @reply: Buffer for the reply event + * @reply_size: Expected size back (including RCEB); the reply buffer + * is assumed to be as big as this. + * @returns: >= 0 size of the returned event data if ok, + * < 0 errno code on error. + * + * Arms the NE handle, issues the command to the device and checks the + * basics of the reply event. + */ +static +int i1480_usb_cmd(struct i1480 *i1480, const char *cmd_name, size_t cmd_size) +{ + int result; + struct device *dev = i1480->dev; + struct i1480_usb *i1480_usb = container_of(i1480, struct i1480_usb, i1480); + struct usb_endpoint_descriptor *epd; + struct uwb_rccb *cmd = i1480->cmd_buf; + u8 iface_no; + + d_fnstart(3, dev, "(%p, %s, %zu)\n", i1480, cmd_name, cmd_size); + /* Post a read on the notification & event endpoint */ + iface_no = i1480_usb->usb_iface->cur_altsetting->desc.bInterfaceNumber; + epd = &i1480_usb->usb_iface->cur_altsetting->endpoint[0].desc; + usb_fill_int_urb( + i1480_usb->neep_urb, i1480_usb->usb_dev, + usb_rcvintpipe(i1480_usb->usb_dev, epd->bEndpointAddress), + i1480->evt_buf, i1480->buf_size, + i1480_usb_neep_cb, i1480, epd->bInterval); + result = usb_submit_urb(i1480_usb->neep_urb, GFP_KERNEL); + if (result < 0) { + dev_err(dev, "%s: cannot submit NEEP read: %d\n", + cmd_name, result); + goto error_submit_ep1; + } + /* Now post the command on EP0 */ + result = usb_control_msg( + i1480_usb->usb_dev, usb_sndctrlpipe(i1480_usb->usb_dev, 0), + WA_EXEC_RC_CMD, + USB_DIR_OUT | USB_RECIP_INTERFACE | USB_TYPE_CLASS, + 0, iface_no, + cmd, cmd_size, + 100 /* FIXME: this is totally arbitrary */); + if (result < 0) { + dev_err(dev, "%s: control request failed: %d\n", + cmd_name, result); + goto error_submit_ep0; + } + d_fnend(3, dev, "(%p, %s, %zu) = %d\n", + i1480, cmd_name, cmd_size, result); + return result; + +error_submit_ep0: + usb_kill_urb(i1480_usb->neep_urb); +error_submit_ep1: + d_fnend(3, dev, "(%p, %s, %zu) = %d\n", + i1480, cmd_name, cmd_size, result); + return result; +} + + +/* + * Probe a i1480 device for uploading firmware. + * + * We attach only to interface #0, which is the radio control interface. + */ +static +int i1480_usb_probe(struct usb_interface *iface, const struct usb_device_id *id) +{ + struct i1480_usb *i1480_usb; + struct i1480 *i1480; + struct device *dev = &iface->dev; + int result; + + result = -ENODEV; + if (iface->cur_altsetting->desc.bInterfaceNumber != 0) { + dev_dbg(dev, "not attaching to iface %d\n", + iface->cur_altsetting->desc.bInterfaceNumber); + goto error; + } + if (iface->num_altsetting > 1 + && interface_to_usbdev(iface)->descriptor.idProduct == 0xbabe) { + /* Need altsetting #1 [HW QUIRK] or EP1 won't work */ + result = usb_set_interface(interface_to_usbdev(iface), 0, 1); + if (result < 0) + dev_warn(dev, + "can't set altsetting 1 on iface 0: %d\n", + result); + } + + result = -ENOMEM; + i1480_usb = kzalloc(sizeof(*i1480_usb), GFP_KERNEL); + if (i1480_usb == NULL) { + dev_err(dev, "Unable to allocate instance\n"); + goto error; + } + i1480_usb_init(i1480_usb); + + i1480 = &i1480_usb->i1480; + i1480->buf_size = 512; + i1480->cmd_buf = kmalloc(2 * i1480->buf_size, GFP_KERNEL); + if (i1480->cmd_buf == NULL) { + dev_err(dev, "Cannot allocate transfer buffers\n"); + result = -ENOMEM; + goto error_buf_alloc; + } + i1480->evt_buf = i1480->cmd_buf + i1480->buf_size; + + result = i1480_usb_create(i1480_usb, iface); + if (result < 0) { + dev_err(dev, "Cannot create instance: %d\n", result); + goto error_create; + } + + /* setup the fops and upload the firmare */ + i1480->pre_fw_name = "i1480-pre-phy-0.0.bin"; + i1480->mac_fw_name = "i1480-usb-0.0.bin"; + i1480->mac_fw_name_deprecate = "ptc-0.0.bin"; + i1480->phy_fw_name = "i1480-phy-0.0.bin"; + i1480->dev = &iface->dev; + i1480->write = i1480_usb_write; + i1480->read = i1480_usb_read; + i1480->rc_setup = NULL; + i1480->wait_init_done = i1480_usb_wait_init_done; + i1480->cmd = i1480_usb_cmd; + + result = i1480_fw_upload(&i1480_usb->i1480); /* the real thing */ + if (result >= 0) { + usb_reset_device(i1480_usb->usb_dev); + result = -ENODEV; /* we don't want to bind to the iface */ + } + i1480_usb_destroy(i1480_usb); +error_create: + kfree(i1480->cmd_buf); +error_buf_alloc: + kfree(i1480_usb); +error: + return result; +} + +#define i1480_USB_DEV(v, p) \ +{ \ + .match_flags = USB_DEVICE_ID_MATCH_DEVICE \ + | USB_DEVICE_ID_MATCH_DEV_INFO \ + | USB_DEVICE_ID_MATCH_INT_INFO, \ + .idVendor = (v), \ + .idProduct = (p), \ + .bDeviceClass = 0xff, \ + .bDeviceSubClass = 0xff, \ + .bDeviceProtocol = 0xff, \ + .bInterfaceClass = 0xff, \ + .bInterfaceSubClass = 0xff, \ + .bInterfaceProtocol = 0xff, \ +} + + +/** USB device ID's that we handle */ +static struct usb_device_id i1480_usb_id_table[] = { + i1480_USB_DEV(0x8086, 0xdf3b), + i1480_USB_DEV(0x15a9, 0x0005), + i1480_USB_DEV(0x07d1, 0x3802), + i1480_USB_DEV(0x050d, 0x305a), + i1480_USB_DEV(0x3495, 0x3007), + {}, +}; +MODULE_DEVICE_TABLE(usb, i1480_usb_id_table); + + +static struct usb_driver i1480_dfu_driver = { + .name = "i1480-dfu-usb", + .id_table = i1480_usb_id_table, + .probe = i1480_usb_probe, + .disconnect = NULL, +}; + + +/* + * Initialize the i1480 DFU driver. + * + * We also need to register our function for guessing event sizes. + */ +static int __init i1480_dfu_driver_init(void) +{ + return usb_register(&i1480_dfu_driver); +} +module_init(i1480_dfu_driver_init); + + +static void __exit i1480_dfu_driver_exit(void) +{ + usb_deregister(&i1480_dfu_driver); +} +module_exit(i1480_dfu_driver_exit); + + +MODULE_AUTHOR("Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>"); +MODULE_DESCRIPTION("Intel Wireless UWB Link 1480 firmware uploader for USB"); +MODULE_LICENSE("GPL"); diff --git a/drivers/uwb/i1480/i1480-est.c b/drivers/uwb/i1480/i1480-est.c new file mode 100644 index 000000000000..7bf8c6febae7 --- /dev/null +++ b/drivers/uwb/i1480/i1480-est.c @@ -0,0 +1,99 @@ +/* + * Intel Wireless UWB Link 1480 + * Event Size tables for Wired Adaptors + * + * Copyright (C) 2005-2006 Intel Corporation + * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + * + * + * FIXME: docs + */ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/usb.h> +#include <linux/uwb.h> +#include "dfu/i1480-dfu.h" + + +/** Event size table for wEvents 0x00XX */ +static struct uwb_est_entry i1480_est_fd00[] = { + /* Anybody expecting this response has to use + * neh->extra_size to specify the real size that will + * come back. */ + [i1480_EVT_CONFIRM] = { .size = sizeof(struct i1480_evt_confirm) }, + [i1480_CMD_SET_IP_MAS] = { .size = sizeof(struct i1480_evt_confirm) }, +#ifdef i1480_RCEB_EXTENDED + [0x09] = { + .size = sizeof(struct i1480_rceb), + .offset = 1 + offsetof(struct i1480_rceb, wParamLength), + }, +#endif +}; + +/** Event size table for wEvents 0x01XX */ +static struct uwb_est_entry i1480_est_fd01[] = { + [0xff & i1480_EVT_RM_INIT_DONE] = { .size = sizeof(struct i1480_rceb) }, + [0xff & i1480_EVT_DEV_ADD] = { .size = sizeof(struct i1480_rceb) + 9 }, + [0xff & i1480_EVT_DEV_RM] = { .size = sizeof(struct i1480_rceb) + 9 }, + [0xff & i1480_EVT_DEV_ID_CHANGE] = { + .size = sizeof(struct i1480_rceb) + 2 }, +}; + +static int i1480_est_init(void) +{ + int result = uwb_est_register(i1480_CET_VS1, 0x00, 0x8086, 0x0c3b, + i1480_est_fd00, + ARRAY_SIZE(i1480_est_fd00)); + if (result < 0) { + printk(KERN_ERR "Can't register EST table fd00: %d\n", result); + return result; + } + result = uwb_est_register(i1480_CET_VS1, 0x01, 0x8086, 0x0c3b, + i1480_est_fd01, ARRAY_SIZE(i1480_est_fd01)); + if (result < 0) { + printk(KERN_ERR "Can't register EST table fd01: %d\n", result); + return result; + } + return 0; +} +module_init(i1480_est_init); + +static void i1480_est_exit(void) +{ + uwb_est_unregister(i1480_CET_VS1, 0x00, 0x8086, 0x0c3b, + i1480_est_fd00, ARRAY_SIZE(i1480_est_fd00)); + uwb_est_unregister(i1480_CET_VS1, 0x01, 0x8086, 0x0c3b, + i1480_est_fd01, ARRAY_SIZE(i1480_est_fd01)); +} +module_exit(i1480_est_exit); + +MODULE_AUTHOR("Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>"); +MODULE_DESCRIPTION("i1480's Vendor Specific Event Size Tables"); +MODULE_LICENSE("GPL"); + +/** + * USB device ID's that we handle + * + * [so we are loaded when this kind device is connected] + */ +static struct usb_device_id i1480_est_id_table[] = { + { USB_DEVICE(0x8086, 0xdf3b), }, + { USB_DEVICE(0x8086, 0x0c3b), }, + { }, +}; +MODULE_DEVICE_TABLE(usb, i1480_est_id_table); diff --git a/drivers/uwb/i1480/i1480-wlp.h b/drivers/uwb/i1480/i1480-wlp.h new file mode 100644 index 000000000000..18a8b0e4567b --- /dev/null +++ b/drivers/uwb/i1480/i1480-wlp.h @@ -0,0 +1,200 @@ +/* + * Intel 1480 Wireless UWB Link + * WLP specific definitions + * + * + * Copyright (C) 2005-2006 Intel Corporation + * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + * + * + * FIXME: docs + */ + +#ifndef __i1480_wlp_h__ +#define __i1480_wlp_h__ + +#include <linux/spinlock.h> +#include <linux/list.h> +#include <linux/uwb.h> +#include <linux/if_ether.h> +#include <asm/byteorder.h> + +/* New simplified header format? */ +#undef WLP_HDR_FMT_2 /* FIXME: rename */ + +/** + * Values of the Delivery ID & Type field when PCA or DRP + * + * The Delivery ID & Type field in the WLP TX header indicates whether + * the frame is PCA or DRP. This is done based on the high level bit of + * this field. + * We use this constant to test if the traffic is PCA or DRP as follows: + * if (wlp_tx_hdr_delivery_id_type(wlp_tx_hdr) & WLP_DRP) + * this is DRP traffic + * else + * this is PCA traffic + */ +enum deliver_id_type_bit { + WLP_DRP = 8, +}; + +/** + * WLP TX header + * + * Indicates UWB/WLP-specific transmission parameters for a network + * packet. + */ +struct wlp_tx_hdr { + /* dword 0 */ + struct uwb_dev_addr dstaddr; + u8 key_index; + u8 mac_params; + /* dword 1 */ + u8 phy_params; +#ifndef WLP_HDR_FMT_2 + u8 reserved; + __le16 oui01; /* FIXME: not so sure if __le16 or u8[2] */ + /* dword 2 */ + u8 oui2; /* if all LE, it could be merged */ + __le16 prid; +#endif +} __attribute__((packed)); + +static inline int wlp_tx_hdr_delivery_id_type(const struct wlp_tx_hdr *hdr) +{ + return hdr->mac_params & 0x0f; +} + +static inline int wlp_tx_hdr_ack_policy(const struct wlp_tx_hdr *hdr) +{ + return (hdr->mac_params >> 4) & 0x07; +} + +static inline int wlp_tx_hdr_rts_cts(const struct wlp_tx_hdr *hdr) +{ + return (hdr->mac_params >> 7) & 0x01; +} + +static inline void wlp_tx_hdr_set_delivery_id_type(struct wlp_tx_hdr *hdr, int id) +{ + hdr->mac_params = (hdr->mac_params & ~0x0f) | id; +} + +static inline void wlp_tx_hdr_set_ack_policy(struct wlp_tx_hdr *hdr, + enum uwb_ack_pol policy) +{ + hdr->mac_params = (hdr->mac_params & ~0x70) | (policy << 4); +} + +static inline void wlp_tx_hdr_set_rts_cts(struct wlp_tx_hdr *hdr, int rts_cts) +{ + hdr->mac_params = (hdr->mac_params & ~0x80) | (rts_cts << 7); +} + +static inline enum uwb_phy_rate wlp_tx_hdr_phy_rate(const struct wlp_tx_hdr *hdr) +{ + return hdr->phy_params & 0x0f; +} + +static inline int wlp_tx_hdr_tx_power(const struct wlp_tx_hdr *hdr) +{ + return (hdr->phy_params >> 4) & 0x0f; +} + +static inline void wlp_tx_hdr_set_phy_rate(struct wlp_tx_hdr *hdr, enum uwb_phy_rate rate) +{ + hdr->phy_params = (hdr->phy_params & ~0x0f) | rate; +} + +static inline void wlp_tx_hdr_set_tx_power(struct wlp_tx_hdr *hdr, int pwr) +{ + hdr->phy_params = (hdr->phy_params & ~0xf0) | (pwr << 4); +} + + +/** + * WLP RX header + * + * Provides UWB/WLP-specific transmission data for a received + * network packet. + */ +struct wlp_rx_hdr { + /* dword 0 */ + struct uwb_dev_addr dstaddr; + struct uwb_dev_addr srcaddr; + /* dword 1 */ + u8 LQI; + s8 RSSI; + u8 reserved3; +#ifndef WLP_HDR_FMT_2 + u8 oui0; + /* dword 2 */ + __le16 oui12; + __le16 prid; +#endif +} __attribute__((packed)); + + +/** User configurable options for WLP */ +struct wlp_options { + struct mutex mutex; /* access to user configurable options*/ + struct wlp_tx_hdr def_tx_hdr; /* default tx hdr */ + u8 pca_base_priority; + u8 bw_alloc; /*index into bw_allocs[] for PCA/DRP reservations*/ +}; + + +static inline +void wlp_options_init(struct wlp_options *options) +{ + mutex_init(&options->mutex); + wlp_tx_hdr_set_ack_policy(&options->def_tx_hdr, UWB_ACK_INM); + wlp_tx_hdr_set_rts_cts(&options->def_tx_hdr, 1); + /* FIXME: default to phy caps */ + wlp_tx_hdr_set_phy_rate(&options->def_tx_hdr, UWB_PHY_RATE_480); +#ifndef WLP_HDR_FMT_2 + options->def_tx_hdr.prid = cpu_to_le16(0x0000); +#endif +} + + +/* sysfs helpers */ + +extern ssize_t uwb_pca_base_priority_store(struct wlp_options *, + const char *, size_t); +extern ssize_t uwb_pca_base_priority_show(const struct wlp_options *, char *); +extern ssize_t uwb_bw_alloc_store(struct wlp_options *, const char *, size_t); +extern ssize_t uwb_bw_alloc_show(const struct wlp_options *, char *); +extern ssize_t uwb_ack_policy_store(struct wlp_options *, + const char *, size_t); +extern ssize_t uwb_ack_policy_show(const struct wlp_options *, char *); +extern ssize_t uwb_rts_cts_store(struct wlp_options *, const char *, size_t); +extern ssize_t uwb_rts_cts_show(const struct wlp_options *, char *); +extern ssize_t uwb_phy_rate_store(struct wlp_options *, const char *, size_t); +extern ssize_t uwb_phy_rate_show(const struct wlp_options *, char *); + + +/** Simple bandwidth allocation (temporary and too simple) */ +struct wlp_bw_allocs { + const char *name; + struct { + u8 mask, stream; + } tx, rx; +}; + + +#endif /* #ifndef __i1480_wlp_h__ */ diff --git a/drivers/uwb/i1480/i1480u-wlp/Makefile b/drivers/uwb/i1480/i1480u-wlp/Makefile new file mode 100644 index 000000000000..fe6709b8e68b --- /dev/null +++ b/drivers/uwb/i1480/i1480u-wlp/Makefile @@ -0,0 +1,8 @@ +obj-$(CONFIG_UWB_I1480U_WLP) += i1480u-wlp.o + +i1480u-wlp-objs := \ + lc.o \ + netdev.o \ + rx.o \ + sysfs.o \ + tx.o diff --git a/drivers/uwb/i1480/i1480u-wlp/i1480u-wlp.h b/drivers/uwb/i1480/i1480u-wlp/i1480u-wlp.h new file mode 100644 index 000000000000..5f1b2951bb83 --- /dev/null +++ b/drivers/uwb/i1480/i1480u-wlp/i1480u-wlp.h @@ -0,0 +1,284 @@ +/* + * Intel 1480 Wireless UWB Link USB + * Header formats, constants, general internal interfaces + * + * + * Copyright (C) 2005-2006 Intel Corporation + * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + * + * + * This is not an standard interface. + * + * FIXME: docs + * + * i1480u-wlp is pretty simple: two endpoints, one for tx, one for + * rx. rx is polled. Network packets (ethernet, whatever) are wrapped + * in i1480 TX or RX headers (for sending over the air), and these + * packets are wrapped in UNTD headers (for sending to the WLP UWB + * controller). + * + * UNTD packets (UNTD hdr + i1480 hdr + network packet) packets + * cannot be bigger than i1480u_MAX_FRG_SIZE. When this happens, the + * i1480 packet is broken in chunks/packets: + * + * UNTD-1st.hdr + i1480.hdr + payload + * UNTD-next.hdr + payload + * ... + * UNTD-last.hdr + payload + * + * so that each packet is smaller or equal than i1480u_MAX_FRG_SIZE. + * + * All HW structures and bitmaps are little endian, so we need to play + * ugly tricks when defining bitfields. Hoping for the day GCC + * implements __attribute__((endian(1234))). + * + * FIXME: ROADMAP to the whole implementation + */ + +#ifndef __i1480u_wlp_h__ +#define __i1480u_wlp_h__ + +#include <linux/usb.h> +#include <linux/netdevice.h> +#include <linux/uwb.h> /* struct uwb_rc, struct uwb_notifs_handler */ +#include <linux/wlp.h> +#include "../i1480-wlp.h" + +#undef i1480u_FLOW_CONTROL /* Enable flow control code */ + +/** + * Basic flow control + */ +enum { + i1480u_TX_INFLIGHT_MAX = 1000, + i1480u_TX_INFLIGHT_THRESHOLD = 100, +}; + +/** Maximum size of a transaction that we can tx/rx */ +enum { + /* Maximum packet size computed as follows: max UNTD header (8) + + * i1480 RX header (8) + max Ethernet header and payload (4096) + + * Padding added by skb_reserve (2) to make post Ethernet payload + * start on 16 byte boundary*/ + i1480u_MAX_RX_PKT_SIZE = 4114, + i1480u_MAX_FRG_SIZE = 512, + i1480u_RX_BUFS = 9, +}; + + +/** + * UNTD packet type + * + * We need to fragment any payload whose UNTD packet is going to be + * bigger than i1480u_MAX_FRG_SIZE. + */ +enum i1480u_pkt_type { + i1480u_PKT_FRAG_1ST = 0x1, + i1480u_PKT_FRAG_NXT = 0x0, + i1480u_PKT_FRAG_LST = 0x2, + i1480u_PKT_FRAG_CMP = 0x3 +}; +enum { + i1480u_PKT_NONE = 0x4, +}; + +/** USB Network Transfer Descriptor - common */ +struct untd_hdr { + u8 type; + __le16 len; +} __attribute__((packed)); + +static inline enum i1480u_pkt_type untd_hdr_type(const struct untd_hdr *hdr) +{ + return hdr->type & 0x03; +} + +static inline int untd_hdr_rx_tx(const struct untd_hdr *hdr) +{ + return (hdr->type >> 2) & 0x01; +} + +static inline void untd_hdr_set_type(struct untd_hdr *hdr, enum i1480u_pkt_type type) +{ + hdr->type = (hdr->type & ~0x03) | type; +} + +static inline void untd_hdr_set_rx_tx(struct untd_hdr *hdr, int rx_tx) +{ + hdr->type = (hdr->type & ~0x04) | (rx_tx << 2); +} + + +/** + * USB Network Transfer Descriptor - Complete Packet + * + * This is for a packet that is smaller (header + payload) than + * i1480u_MAX_FRG_SIZE. + * + * @hdr.total_len is the size of the payload; the payload doesn't + * count this header nor the padding, but includes the size of i1480 + * header. + */ +struct untd_hdr_cmp { + struct untd_hdr hdr; + u8 padding; +} __attribute__((packed)); + + +/** + * USB Network Transfer Descriptor - First fragment + * + * @hdr.len is the size of the *whole packet* (excluding UNTD + * headers); @fragment_len is the size of the payload (excluding UNTD + * headers, but including i1480 headers). + */ +struct untd_hdr_1st { + struct untd_hdr hdr; + __le16 fragment_len; + u8 padding[3]; +} __attribute__((packed)); + + +/** + * USB Network Transfer Descriptor - Next / Last [Rest] + * + * @hdr.len is the size of the payload, not including headrs. + */ +struct untd_hdr_rst { + struct untd_hdr hdr; + u8 padding; +} __attribute__((packed)); + + +/** + * Transmission context + * + * Wraps all the stuff needed to track a pending/active tx + * operation. + */ +struct i1480u_tx { + struct list_head list_node; + struct i1480u *i1480u; + struct urb *urb; + + struct sk_buff *skb; + struct wlp_tx_hdr *wlp_tx_hdr; + + void *buf; /* if NULL, no new buf was used */ + size_t buf_size; +}; + +/** + * Basic flow control + * + * We maintain a basic flow control counter. "count" how many TX URBs are + * outstanding. Only allow "max" + * TX URBs to be outstanding. If this value is reached the queue will be + * stopped. The queue will be restarted when there are + * "threshold" URBs outstanding. + * Maintain a counter of how many time the TX queue needed to be restarted + * due to the "max" being exceeded and the "threshold" reached again. The + * timestamp "restart_ts" is to keep track from when the counter was last + * queried (see sysfs handling of file wlp_tx_inflight). + */ +struct i1480u_tx_inflight { + atomic_t count; + unsigned long max; + unsigned long threshold; + unsigned long restart_ts; + atomic_t restart_count; +}; + +/** + * Instance of a i1480u WLP interface + * + * Keeps references to the USB device that wraps it, as well as it's + * interface and associated UWB host controller. As well, it also + * keeps a link to the netdevice for integration into the networking + * stack. + * We maintian separate error history for the tx and rx endpoints because + * the implementation does not rely on locking - having one shared + * structure between endpoints may cause problems. Adding locking to the + * implementation will have higher cost than adding a separate structure. + */ +struct i1480u { + struct usb_device *usb_dev; + struct usb_interface *usb_iface; + struct net_device *net_dev; + + spinlock_t lock; + struct net_device_stats stats; + + /* RX context handling */ + struct sk_buff *rx_skb; + struct uwb_dev_addr rx_srcaddr; + size_t rx_untd_pkt_size; + struct i1480u_rx_buf { + struct i1480u *i1480u; /* back pointer */ + struct urb *urb; + struct sk_buff *data; /* i1480u_MAX_RX_PKT_SIZE each */ + } rx_buf[i1480u_RX_BUFS]; /* N bufs */ + + spinlock_t tx_list_lock; /* TX context */ + struct list_head tx_list; + u8 tx_stream; + + struct stats lqe_stats, rssi_stats; /* radio statistics */ + + /* Options we can set from sysfs */ + struct wlp_options options; + struct uwb_notifs_handler uwb_notifs_handler; + struct edc tx_errors; + struct edc rx_errors; + struct wlp wlp; +#ifdef i1480u_FLOW_CONTROL + struct urb *notif_urb; + struct edc notif_edc; /* error density counter */ + u8 notif_buffer[1]; +#endif + struct i1480u_tx_inflight tx_inflight; +}; + +/* Internal interfaces */ +extern void i1480u_rx_cb(struct urb *urb); +extern int i1480u_rx_setup(struct i1480u *); +extern void i1480u_rx_release(struct i1480u *); +extern void i1480u_tx_release(struct i1480u *); +extern int i1480u_xmit_frame(struct wlp *, struct sk_buff *, + struct uwb_dev_addr *); +extern void i1480u_stop_queue(struct wlp *); +extern void i1480u_start_queue(struct wlp *); +extern int i1480u_sysfs_setup(struct i1480u *); +extern void i1480u_sysfs_release(struct i1480u *); + +/* netdev interface */ +extern int i1480u_open(struct net_device *); +extern int i1480u_stop(struct net_device *); +extern int i1480u_hard_start_xmit(struct sk_buff *, struct net_device *); +extern void i1480u_tx_timeout(struct net_device *); +extern int i1480u_set_config(struct net_device *, struct ifmap *); +extern struct net_device_stats *i1480u_get_stats(struct net_device *); +extern int i1480u_change_mtu(struct net_device *, int); +extern void i1480u_uwb_notifs_cb(void *, struct uwb_dev *, enum uwb_notifs); + +/* bandwidth allocation callback */ +extern void i1480u_bw_alloc_cb(struct uwb_rsv *); + +/* Sys FS */ +extern struct attribute_group i1480u_wlp_attr_group; + +#endif /* #ifndef __i1480u_wlp_h__ */ diff --git a/drivers/uwb/i1480/i1480u-wlp/lc.c b/drivers/uwb/i1480/i1480u-wlp/lc.c new file mode 100644 index 000000000000..737d60cd5b73 --- /dev/null +++ b/drivers/uwb/i1480/i1480u-wlp/lc.c @@ -0,0 +1,421 @@ +/* + * WUSB Wire Adapter: WLP interface + * Driver for the Linux Network stack. + * + * Copyright (C) 2005-2006 Intel Corporation + * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + * + * + * FIXME: docs + * + * This implements a very simple network driver for the WLP USB + * device that is associated to a UWB (Ultra Wide Band) host. + * + * This is seen as an interface of a composite device. Once the UWB + * host has an association to another WLP capable device, the + * networking interface (aka WLP) can start to send packets back and + * forth. + * + * Limitations: + * + * - Hand cranked; can't ifup the interface until there is an association + * + * - BW allocation very simplistic [see i1480u_mas_set() and callees]. + * + * + * ROADMAP: + * + * ENTRY POINTS (driver model): + * + * i1480u_driver_{exit,init}(): initialization of the driver. + * + * i1480u_probe(): called by the driver code when a device + * matching 'i1480u_id_table' is connected. + * + * This allocs a netdev instance, inits with + * i1480u_add(), then registers_netdev(). + * i1480u_init() + * i1480u_add() + * + * i1480u_disconnect(): device has been disconnected/module + * is being removed. + * i1480u_rm() + */ +#include <linux/version.h> +#include <linux/if_arp.h> +#include <linux/etherdevice.h> +#include <linux/uwb/debug.h> +#include "i1480u-wlp.h" + + + +static inline +void i1480u_init(struct i1480u *i1480u) +{ + /* nothing so far... doesn't it suck? */ + spin_lock_init(&i1480u->lock); + INIT_LIST_HEAD(&i1480u->tx_list); + spin_lock_init(&i1480u->tx_list_lock); + wlp_options_init(&i1480u->options); + edc_init(&i1480u->tx_errors); + edc_init(&i1480u->rx_errors); +#ifdef i1480u_FLOW_CONTROL + edc_init(&i1480u->notif_edc); +#endif + stats_init(&i1480u->lqe_stats); + stats_init(&i1480u->rssi_stats); + wlp_init(&i1480u->wlp); +} + +/** + * Fill WLP device information structure + * + * The structure will contain a few character arrays, each ending with a + * null terminated string. Each string has to fit (excluding terminating + * character) into a specified range obtained from the WLP substack. + * + * It is still not clear exactly how this device information should be + * obtained. Until we find out we use the USB device descriptor as backup, some + * information elements have intuitive mappings, other not. + */ +static +void i1480u_fill_device_info(struct wlp *wlp, struct wlp_device_info *dev_info) +{ + struct i1480u *i1480u = container_of(wlp, struct i1480u, wlp); + struct usb_device *usb_dev = i1480u->usb_dev; + /* Treat device name and model name the same */ + if (usb_dev->descriptor.iProduct) { + usb_string(usb_dev, usb_dev->descriptor.iProduct, + dev_info->name, sizeof(dev_info->name)); + usb_string(usb_dev, usb_dev->descriptor.iProduct, + dev_info->model_name, sizeof(dev_info->model_name)); + } + if (usb_dev->descriptor.iManufacturer) + usb_string(usb_dev, usb_dev->descriptor.iManufacturer, + dev_info->manufacturer, + sizeof(dev_info->manufacturer)); + scnprintf(dev_info->model_nr, sizeof(dev_info->model_nr), "%04x", + __le16_to_cpu(usb_dev->descriptor.bcdDevice)); + if (usb_dev->descriptor.iSerialNumber) + usb_string(usb_dev, usb_dev->descriptor.iSerialNumber, + dev_info->serial, sizeof(dev_info->serial)); + /* FIXME: where should we obtain category? */ + dev_info->prim_dev_type.category = cpu_to_le16(WLP_DEV_CAT_OTHER); + /* FIXME: Complete OUI and OUIsubdiv attributes */ +} + +#ifdef i1480u_FLOW_CONTROL +/** + * Callback for the notification endpoint + * + * This mostly controls the xon/xoff protocol. In case of hard error, + * we stop the queue. If not, we always retry. + */ +static +void i1480u_notif_cb(struct urb *urb, struct pt_regs *regs) +{ + struct i1480u *i1480u = urb->context; + struct usb_interface *usb_iface = i1480u->usb_iface; + struct device *dev = &usb_iface->dev; + int result; + + switch (urb->status) { + case 0: /* Got valid data, do xon/xoff */ + switch (i1480u->notif_buffer[0]) { + case 'N': + dev_err(dev, "XOFF STOPPING queue at %lu\n", jiffies); + netif_stop_queue(i1480u->net_dev); + break; + case 'A': + dev_err(dev, "XON STARTING queue at %lu\n", jiffies); + netif_start_queue(i1480u->net_dev); + break; + default: + dev_err(dev, "NEP: unknown data 0x%02hhx\n", + i1480u->notif_buffer[0]); + } + break; + case -ECONNRESET: /* Controlled situation ... */ + case -ENOENT: /* we killed the URB... */ + dev_err(dev, "NEP: URB reset/noent %d\n", urb->status); + goto error; + case -ESHUTDOWN: /* going away! */ + dev_err(dev, "NEP: URB down %d\n", urb->status); + goto error; + default: /* Retry unless it gets ugly */ + if (edc_inc(&i1480u->notif_edc, EDC_MAX_ERRORS, + EDC_ERROR_TIMEFRAME)) { + dev_err(dev, "NEP: URB max acceptable errors " + "exceeded; resetting device\n"); + goto error_reset; + } + dev_err(dev, "NEP: URB error %d\n", urb->status); + break; + } + result = usb_submit_urb(urb, GFP_ATOMIC); + if (result < 0) { + dev_err(dev, "NEP: Can't resubmit URB: %d; resetting device\n", + result); + goto error_reset; + } + return; + +error_reset: + wlp_reset_all(&i1480-wlp); +error: + netif_stop_queue(i1480u->net_dev); + return; +} +#endif + +static +int i1480u_add(struct i1480u *i1480u, struct usb_interface *iface) +{ + int result = -ENODEV; + struct wlp *wlp = &i1480u->wlp; + struct usb_device *usb_dev = interface_to_usbdev(iface); + struct net_device *net_dev = i1480u->net_dev; + struct uwb_rc *rc; + struct uwb_dev *uwb_dev; +#ifdef i1480u_FLOW_CONTROL + struct usb_endpoint_descriptor *epd; +#endif + + i1480u->usb_dev = usb_get_dev(usb_dev); + i1480u->usb_iface = iface; + rc = uwb_rc_get_by_grandpa(&i1480u->usb_dev->dev); + if (rc == NULL) { + dev_err(&iface->dev, "Cannot get associated UWB Radio " + "Controller\n"); + goto out; + } + wlp->xmit_frame = i1480u_xmit_frame; + wlp->fill_device_info = i1480u_fill_device_info; + wlp->stop_queue = i1480u_stop_queue; + wlp->start_queue = i1480u_start_queue; + result = wlp_setup(wlp, rc); + if (result < 0) { + dev_err(&iface->dev, "Cannot setup WLP\n"); + goto error_wlp_setup; + } + result = 0; + ether_setup(net_dev); /* make it an etherdevice */ + uwb_dev = &rc->uwb_dev; + /* FIXME: hookup address change notifications? */ + + memcpy(net_dev->dev_addr, uwb_dev->mac_addr.data, + sizeof(net_dev->dev_addr)); + + net_dev->hard_header_len = sizeof(struct untd_hdr_cmp) + + sizeof(struct wlp_tx_hdr) + + WLP_DATA_HLEN + + ETH_HLEN; + net_dev->mtu = 3500; + net_dev->tx_queue_len = 20; /* FIXME: maybe use 1000? */ + +/* net_dev->flags &= ~IFF_BROADCAST; FIXME: BUG in firmware */ + /* FIXME: multicast disabled */ + net_dev->flags &= ~IFF_MULTICAST; + net_dev->features &= ~NETIF_F_SG; + net_dev->features &= ~NETIF_F_FRAGLIST; + /* All NETIF_F_*_CSUM disabled */ + net_dev->features |= NETIF_F_HIGHDMA; + net_dev->watchdog_timeo = 5*HZ; /* FIXME: a better default? */ + + net_dev->open = i1480u_open; + net_dev->stop = i1480u_stop; + net_dev->hard_start_xmit = i1480u_hard_start_xmit; + net_dev->tx_timeout = i1480u_tx_timeout; + net_dev->get_stats = i1480u_get_stats; + net_dev->set_config = i1480u_set_config; + net_dev->change_mtu = i1480u_change_mtu; + +#ifdef i1480u_FLOW_CONTROL + /* Notification endpoint setup (submitted when we open the device) */ + i1480u->notif_urb = usb_alloc_urb(0, GFP_KERNEL); + if (i1480u->notif_urb == NULL) { + dev_err(&iface->dev, "Unable to allocate notification URB\n"); + result = -ENOMEM; + goto error_urb_alloc; + } + epd = &iface->cur_altsetting->endpoint[0].desc; + usb_fill_int_urb(i1480u->notif_urb, usb_dev, + usb_rcvintpipe(usb_dev, epd->bEndpointAddress), + i1480u->notif_buffer, sizeof(i1480u->notif_buffer), + i1480u_notif_cb, i1480u, epd->bInterval); + +#endif + + i1480u->tx_inflight.max = i1480u_TX_INFLIGHT_MAX; + i1480u->tx_inflight.threshold = i1480u_TX_INFLIGHT_THRESHOLD; + i1480u->tx_inflight.restart_ts = jiffies; + usb_set_intfdata(iface, i1480u); + return result; + +#ifdef i1480u_FLOW_CONTROL +error_urb_alloc: +#endif + wlp_remove(wlp); +error_wlp_setup: + uwb_rc_put(rc); +out: + usb_put_dev(i1480u->usb_dev); + return result; +} + +static void i1480u_rm(struct i1480u *i1480u) +{ + struct uwb_rc *rc = i1480u->wlp.rc; + usb_set_intfdata(i1480u->usb_iface, NULL); +#ifdef i1480u_FLOW_CONTROL + usb_kill_urb(i1480u->notif_urb); + usb_free_urb(i1480u->notif_urb); +#endif + wlp_remove(&i1480u->wlp); + uwb_rc_put(rc); + usb_put_dev(i1480u->usb_dev); +} + +/** Just setup @net_dev's i1480u private data */ +static void i1480u_netdev_setup(struct net_device *net_dev) +{ + struct i1480u *i1480u = netdev_priv(net_dev); + /* Initialize @i1480u */ + memset(i1480u, 0, sizeof(*i1480u)); + i1480u_init(i1480u); +} + +/** + * Probe a i1480u interface and register it + * + * @iface: USB interface to link to + * @id: USB class/subclass/protocol id + * @returns: 0 if ok, < 0 errno code on error. + * + * Does basic housekeeping stuff and then allocs a netdev with space + * for the i1480u data. Initializes, registers in i1480u, registers in + * netdev, ready to go. + */ +static int i1480u_probe(struct usb_interface *iface, + const struct usb_device_id *id) +{ + int result; + struct net_device *net_dev; + struct device *dev = &iface->dev; + struct i1480u *i1480u; + + /* Allocate instance [calls i1480u_netdev_setup() on it] */ + result = -ENOMEM; + net_dev = alloc_netdev(sizeof(*i1480u), "wlp%d", i1480u_netdev_setup); + if (net_dev == NULL) { + dev_err(dev, "no memory for network device instance\n"); + goto error_alloc_netdev; + } + SET_NETDEV_DEV(net_dev, dev); + i1480u = netdev_priv(net_dev); + i1480u->net_dev = net_dev; + result = i1480u_add(i1480u, iface); /* Now setup all the wlp stuff */ + if (result < 0) { + dev_err(dev, "cannot add i1480u device: %d\n", result); + goto error_i1480u_add; + } + result = register_netdev(net_dev); /* Okey dokey, bring it up */ + if (result < 0) { + dev_err(dev, "cannot register network device: %d\n", result); + goto error_register_netdev; + } + i1480u_sysfs_setup(i1480u); + if (result < 0) + goto error_sysfs_init; + return 0; + +error_sysfs_init: + unregister_netdev(net_dev); +error_register_netdev: + i1480u_rm(i1480u); +error_i1480u_add: + free_netdev(net_dev); +error_alloc_netdev: + return result; +} + + +/** + * Disconect a i1480u from the system. + * + * i1480u_stop() has been called before, so al the rx and tx contexts + * have been taken down already. Make sure the queue is stopped, + * unregister netdev and i1480u, free and kill. + */ +static void i1480u_disconnect(struct usb_interface *iface) +{ + struct i1480u *i1480u; + struct net_device *net_dev; + + i1480u = usb_get_intfdata(iface); + net_dev = i1480u->net_dev; + netif_stop_queue(net_dev); +#ifdef i1480u_FLOW_CONTROL + usb_kill_urb(i1480u->notif_urb); +#endif + i1480u_sysfs_release(i1480u); + unregister_netdev(net_dev); + i1480u_rm(i1480u); + free_netdev(net_dev); +} + +static struct usb_device_id i1480u_id_table[] = { + { + .match_flags = USB_DEVICE_ID_MATCH_DEVICE \ + | USB_DEVICE_ID_MATCH_DEV_INFO \ + | USB_DEVICE_ID_MATCH_INT_INFO, + .idVendor = 0x8086, + .idProduct = 0x0c3b, + .bDeviceClass = 0xef, + .bDeviceSubClass = 0x02, + .bDeviceProtocol = 0x02, + .bInterfaceClass = 0xff, + .bInterfaceSubClass = 0xff, + .bInterfaceProtocol = 0xff, + }, + {}, +}; +MODULE_DEVICE_TABLE(usb, i1480u_id_table); + +static struct usb_driver i1480u_driver = { + .name = KBUILD_MODNAME, + .probe = i1480u_probe, + .disconnect = i1480u_disconnect, + .id_table = i1480u_id_table, +}; + +static int __init i1480u_driver_init(void) +{ + return usb_register(&i1480u_driver); +} +module_init(i1480u_driver_init); + + +static void __exit i1480u_driver_exit(void) +{ + usb_deregister(&i1480u_driver); +} +module_exit(i1480u_driver_exit); + +MODULE_AUTHOR("Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>"); +MODULE_DESCRIPTION("i1480 Wireless UWB Link WLP networking for USB"); +MODULE_LICENSE("GPL"); diff --git a/drivers/uwb/i1480/i1480u-wlp/netdev.c b/drivers/uwb/i1480/i1480u-wlp/netdev.c new file mode 100644 index 000000000000..8802ac43d872 --- /dev/null +++ b/drivers/uwb/i1480/i1480u-wlp/netdev.c @@ -0,0 +1,368 @@ +/* + * WUSB Wire Adapter: WLP interface + * Driver for the Linux Network stack. + * + * Copyright (C) 2005-2006 Intel Corporation + * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + * + * + * FIXME: docs + * + * Implementation of the netdevice linkage (except tx and rx related stuff). + * + * ROADMAP: + * + * ENTRY POINTS (Net device): + * + * i1480u_open(): Called when we ifconfig up the interface; + * associates to a UWB host controller, reserves + * bandwidth (MAS), sets up RX USB URB and starts + * the queue. + * + * i1480u_stop(): Called when we ifconfig down a interface; + * reverses _open(). + * + * i1480u_set_config(): + */ + +#include <linux/if_arp.h> +#include <linux/etherdevice.h> +#include <linux/uwb/debug.h> +#include "i1480u-wlp.h" + +struct i1480u_cmd_set_ip_mas { + struct uwb_rccb rccb; + struct uwb_dev_addr addr; + u8 stream; + u8 owner; + u8 type; /* enum uwb_drp_type */ + u8 baMAS[32]; +} __attribute__((packed)); + + +static +int i1480u_set_ip_mas( + struct uwb_rc *rc, + const struct uwb_dev_addr *dstaddr, + u8 stream, u8 owner, u8 type, unsigned long *mas) +{ + + int result; + struct i1480u_cmd_set_ip_mas *cmd; + struct uwb_rc_evt_confirm reply; + + result = -ENOMEM; + cmd = kzalloc(sizeof(*cmd), GFP_KERNEL); + if (cmd == NULL) + goto error_kzalloc; + cmd->rccb.bCommandType = 0xfd; + cmd->rccb.wCommand = cpu_to_le16(0x000e); + cmd->addr = *dstaddr; + cmd->stream = stream; + cmd->owner = owner; + cmd->type = type; + if (mas == NULL) + memset(cmd->baMAS, 0x00, sizeof(cmd->baMAS)); + else + memcpy(cmd->baMAS, mas, sizeof(cmd->baMAS)); + reply.rceb.bEventType = 0xfd; + reply.rceb.wEvent = cpu_to_le16(0x000e); + result = uwb_rc_cmd(rc, "SET-IP-MAS", &cmd->rccb, sizeof(*cmd), + &reply.rceb, sizeof(reply)); + if (result < 0) + goto error_cmd; + if (reply.bResultCode != UWB_RC_RES_FAIL) { + dev_err(&rc->uwb_dev.dev, + "SET-IP-MAS: command execution failed: %d\n", + reply.bResultCode); + result = -EIO; + } +error_cmd: + kfree(cmd); +error_kzalloc: + return result; +} + +/* + * Inform a WLP interface of a MAS reservation + * + * @rc is assumed refcnted. + */ +/* FIXME: detect if remote device is WLP capable? */ +static int i1480u_mas_set_dev(struct uwb_dev *uwb_dev, struct uwb_rc *rc, + u8 stream, u8 owner, u8 type, unsigned long *mas) +{ + int result = 0; + struct device *dev = &rc->uwb_dev.dev; + + result = i1480u_set_ip_mas(rc, &uwb_dev->dev_addr, stream, owner, + type, mas); + if (result < 0) { + char rcaddrbuf[UWB_ADDR_STRSIZE], devaddrbuf[UWB_ADDR_STRSIZE]; + uwb_dev_addr_print(rcaddrbuf, sizeof(rcaddrbuf), + &rc->uwb_dev.dev_addr); + uwb_dev_addr_print(devaddrbuf, sizeof(devaddrbuf), + &uwb_dev->dev_addr); + dev_err(dev, "Set IP MAS (%s to %s) failed: %d\n", + rcaddrbuf, devaddrbuf, result); + } + return result; +} + +/** + * Called by bandwidth allocator when change occurs in reservation. + * + * @rsv: The reservation that is being established, modified, or + * terminated. + * + * When a reservation is established, modified, or terminated the upper layer + * (WLP here) needs set/update the currently available Media Access Slots + * that can be use for IP traffic. + * + * Our action taken during failure depends on how the reservation is being + * changed: + * - if reservation is being established we do nothing if we cannot set the + * new MAS to be used + * - if reservation is being terminated we revert back to PCA whether the + * SET IP MAS command succeeds or not. + */ +void i1480u_bw_alloc_cb(struct uwb_rsv *rsv) +{ + int result = 0; + struct i1480u *i1480u = rsv->pal_priv; + struct device *dev = &i1480u->usb_iface->dev; + struct uwb_dev *target_dev = rsv->target.dev; + struct uwb_rc *rc = i1480u->wlp.rc; + u8 stream = rsv->stream; + int type = rsv->type; + int is_owner = rsv->owner == &rc->uwb_dev; + unsigned long *bmp = rsv->mas.bm; + + dev_err(dev, "WLP callback called - sending set ip mas\n"); + /*user cannot change options while setting configuration*/ + mutex_lock(&i1480u->options.mutex); + switch (rsv->state) { + case UWB_RSV_STATE_T_ACCEPTED: + case UWB_RSV_STATE_O_ESTABLISHED: + result = i1480u_mas_set_dev(target_dev, rc, stream, is_owner, + type, bmp); + if (result < 0) { + dev_err(dev, "MAS reservation failed: %d\n", result); + goto out; + } + if (is_owner) { + wlp_tx_hdr_set_delivery_id_type(&i1480u->options.def_tx_hdr, + WLP_DRP | stream); + wlp_tx_hdr_set_rts_cts(&i1480u->options.def_tx_hdr, 0); + } + break; + case UWB_RSV_STATE_NONE: + /* revert back to PCA */ + result = i1480u_mas_set_dev(target_dev, rc, stream, is_owner, + type, bmp); + if (result < 0) + dev_err(dev, "MAS reservation failed: %d\n", result); + /* Revert to PCA even though SET IP MAS failed. */ + wlp_tx_hdr_set_delivery_id_type(&i1480u->options.def_tx_hdr, + i1480u->options.pca_base_priority); + wlp_tx_hdr_set_rts_cts(&i1480u->options.def_tx_hdr, 1); + break; + default: + dev_err(dev, "unexpected WLP reservation state: %s (%d).\n", + uwb_rsv_state_str(rsv->state), rsv->state); + break; + } +out: + mutex_unlock(&i1480u->options.mutex); + return; +} + +/** + * + * Called on 'ifconfig up' + */ +int i1480u_open(struct net_device *net_dev) +{ + int result; + struct i1480u *i1480u = netdev_priv(net_dev); + struct wlp *wlp = &i1480u->wlp; + struct uwb_rc *rc; + struct device *dev = &i1480u->usb_iface->dev; + + rc = wlp->rc; + result = i1480u_rx_setup(i1480u); /* Alloc RX stuff */ + if (result < 0) + goto error_rx_setup; + netif_wake_queue(net_dev); +#ifdef i1480u_FLOW_CONTROL + result = usb_submit_urb(i1480u->notif_urb, GFP_KERNEL);; + if (result < 0) { + dev_err(dev, "Can't submit notification URB: %d\n", result); + goto error_notif_urb_submit; + } +#endif + i1480u->uwb_notifs_handler.cb = i1480u_uwb_notifs_cb; + i1480u->uwb_notifs_handler.data = i1480u; + if (uwb_bg_joined(rc)) + netif_carrier_on(net_dev); + else + netif_carrier_off(net_dev); + uwb_notifs_register(rc, &i1480u->uwb_notifs_handler); + /* Interface is up with an address, now we can create WSS */ + result = wlp_wss_setup(net_dev, &wlp->wss); + if (result < 0) { + dev_err(dev, "Can't create WSS: %d. \n", result); + goto error_notif_deregister; + } + return 0; +error_notif_deregister: + uwb_notifs_deregister(rc, &i1480u->uwb_notifs_handler); +#ifdef i1480u_FLOW_CONTROL +error_notif_urb_submit: +#endif + netif_stop_queue(net_dev); + i1480u_rx_release(i1480u); +error_rx_setup: + return result; +} + + +/** + * Called on 'ifconfig down' + */ +int i1480u_stop(struct net_device *net_dev) +{ + struct i1480u *i1480u = netdev_priv(net_dev); + struct wlp *wlp = &i1480u->wlp; + struct uwb_rc *rc = wlp->rc; + + BUG_ON(wlp->rc == NULL); + wlp_wss_remove(&wlp->wss); + uwb_notifs_deregister(rc, &i1480u->uwb_notifs_handler); + netif_carrier_off(net_dev); +#ifdef i1480u_FLOW_CONTROL + usb_kill_urb(i1480u->notif_urb); +#endif + netif_stop_queue(net_dev); + i1480u_rx_release(i1480u); + i1480u_tx_release(i1480u); + return 0; +} + + +/** Report statistics */ +struct net_device_stats *i1480u_get_stats(struct net_device *net_dev) +{ + struct i1480u *i1480u = netdev_priv(net_dev); + return &i1480u->stats; +} + + +/** + * + * Change the interface config--we probably don't have to do anything. + */ +int i1480u_set_config(struct net_device *net_dev, struct ifmap *map) +{ + int result; + struct i1480u *i1480u = netdev_priv(net_dev); + BUG_ON(i1480u->wlp.rc == NULL); + result = 0; + return result; +} + +/** + * Change the MTU of the interface + */ +int i1480u_change_mtu(struct net_device *net_dev, int mtu) +{ + static union { + struct wlp_tx_hdr tx; + struct wlp_rx_hdr rx; + } i1480u_all_hdrs; + + if (mtu < ETH_HLEN) /* We encap eth frames */ + return -ERANGE; + if (mtu > 4000 - sizeof(i1480u_all_hdrs)) + return -ERANGE; + net_dev->mtu = mtu; + return 0; +} + + +/** + * Callback function to handle events from UWB + * When we see other devices we know the carrier is ok, + * if we are the only device in the beacon group we set the carrier + * state to off. + * */ +void i1480u_uwb_notifs_cb(void *data, struct uwb_dev *uwb_dev, + enum uwb_notifs event) +{ + struct i1480u *i1480u = data; + struct net_device *net_dev = i1480u->net_dev; + struct device *dev = &i1480u->usb_iface->dev; + switch (event) { + case UWB_NOTIF_BG_JOIN: + netif_carrier_on(net_dev); + dev_info(dev, "Link is up\n"); + break; + case UWB_NOTIF_BG_LEAVE: + netif_carrier_off(net_dev); + dev_info(dev, "Link is down\n"); + break; + default: + dev_err(dev, "don't know how to handle event %d from uwb\n", + event); + } +} + +/** + * Stop the network queue + * + * Enable WLP substack to stop network queue. We also set the flow control + * threshold at this time to prevent the flow control from restarting the + * queue. + * + * we are loosing the current threshold value here ... FIXME? + */ +void i1480u_stop_queue(struct wlp *wlp) +{ + struct i1480u *i1480u = container_of(wlp, struct i1480u, wlp); + struct net_device *net_dev = i1480u->net_dev; + i1480u->tx_inflight.threshold = 0; + netif_stop_queue(net_dev); +} + +/** + * Start the network queue + * + * Enable WLP substack to start network queue. Also re-enable the flow + * control to manage the queue again. + * + * We re-enable the flow control by storing the default threshold in the + * flow control threshold. This means that if the user modified the + * threshold before the queue was stopped and restarted that information + * will be lost. FIXME? + */ +void i1480u_start_queue(struct wlp *wlp) +{ + struct i1480u *i1480u = container_of(wlp, struct i1480u, wlp); + struct net_device *net_dev = i1480u->net_dev; + i1480u->tx_inflight.threshold = i1480u_TX_INFLIGHT_THRESHOLD; + netif_start_queue(net_dev); +} diff --git a/drivers/uwb/i1480/i1480u-wlp/rx.c b/drivers/uwb/i1480/i1480u-wlp/rx.c new file mode 100644 index 000000000000..9fc035354a76 --- /dev/null +++ b/drivers/uwb/i1480/i1480u-wlp/rx.c @@ -0,0 +1,486 @@ +/* + * WUSB Wire Adapter: WLP interface + * Driver for the Linux Network stack. + * + * Copyright (C) 2005-2006 Intel Corporation + * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + * + * + * i1480u's RX handling is simple. i1480u will send the received + * network packets broken up in fragments; 1 to N fragments make a + * packet, we assemble them together and deliver the packet with netif_rx(). + * + * Beacuse each USB transfer is a *single* fragment (except when the + * transfer contains a first fragment), each URB called thus + * back contains one or two fragments. So we queue N URBs, each with its own + * fragment buffer. When a URB is done, we process it (adding to the + * current skb from the fragment buffer until complete). Once + * processed, we requeue the URB. There is always a bunch of URBs + * ready to take data, so the intergap should be minimal. + * + * An URB's transfer buffer is the data field of a socket buffer. This + * reduces copying as data can be passed directly to network layer. If a + * complete packet or 1st fragment is received the URB's transfer buffer is + * taken away from it and used to send data to the network layer. In this + * case a new transfer buffer is allocated to the URB before being requeued. + * If a "NEXT" or "LAST" fragment is received, the fragment contents is + * appended to the RX packet under construction and the transfer buffer + * is reused. To be able to use this buffer to assemble complete packets + * we set each buffer's size to that of the MAX ethernet packet that can + * be received. There is thus room for improvement in memory usage. + * + * When the max tx fragment size increases, we should be able to read + * data into the skbs directly with very simple code. + * + * ROADMAP: + * + * ENTRY POINTS: + * + * i1480u_rx_setup(): setup RX context [from i1480u_open()] + * + * i1480u_rx_release(): release RX context [from i1480u_stop()] + * + * i1480u_rx_cb(): called when the RX USB URB receives a + * packet. It removes the header and pushes it up + * the Linux netdev stack with netif_rx(). + * + * i1480u_rx_buffer() + * i1480u_drop() and i1480u_fix() + * i1480u_skb_deliver + * + */ + +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include "i1480u-wlp.h" + +#define D_LOCAL 0 +#include <linux/uwb/debug.h> + + +/** + * Setup the RX context + * + * Each URB is provided with a transfer_buffer that is the data field + * of a new socket buffer. + */ +int i1480u_rx_setup(struct i1480u *i1480u) +{ + int result, cnt; + struct device *dev = &i1480u->usb_iface->dev; + struct net_device *net_dev = i1480u->net_dev; + struct usb_endpoint_descriptor *epd; + struct sk_buff *skb; + + /* Alloc RX stuff */ + i1480u->rx_skb = NULL; /* not in process of receiving packet */ + result = -ENOMEM; + epd = &i1480u->usb_iface->cur_altsetting->endpoint[1].desc; + for (cnt = 0; cnt < i1480u_RX_BUFS; cnt++) { + struct i1480u_rx_buf *rx_buf = &i1480u->rx_buf[cnt]; + rx_buf->i1480u = i1480u; + skb = dev_alloc_skb(i1480u_MAX_RX_PKT_SIZE); + if (!skb) { + dev_err(dev, + "RX: cannot allocate RX buffer %d\n", cnt); + result = -ENOMEM; + goto error; + } + skb->dev = net_dev; + skb->ip_summed = CHECKSUM_NONE; + skb_reserve(skb, 2); + rx_buf->data = skb; + rx_buf->urb = usb_alloc_urb(0, GFP_KERNEL); + if (unlikely(rx_buf->urb == NULL)) { + dev_err(dev, "RX: cannot allocate URB %d\n", cnt); + result = -ENOMEM; + goto error; + } + usb_fill_bulk_urb(rx_buf->urb, i1480u->usb_dev, + usb_rcvbulkpipe(i1480u->usb_dev, epd->bEndpointAddress), + rx_buf->data->data, i1480u_MAX_RX_PKT_SIZE - 2, + i1480u_rx_cb, rx_buf); + result = usb_submit_urb(rx_buf->urb, GFP_NOIO); + if (unlikely(result < 0)) { + dev_err(dev, "RX: cannot submit URB %d: %d\n", + cnt, result); + goto error; + } + } + return 0; + +error: + i1480u_rx_release(i1480u); + return result; +} + + +/** Release resources associated to the rx context */ +void i1480u_rx_release(struct i1480u *i1480u) +{ + int cnt; + for (cnt = 0; cnt < i1480u_RX_BUFS; cnt++) { + if (i1480u->rx_buf[cnt].data) + dev_kfree_skb(i1480u->rx_buf[cnt].data); + if (i1480u->rx_buf[cnt].urb) { + usb_kill_urb(i1480u->rx_buf[cnt].urb); + usb_free_urb(i1480u->rx_buf[cnt].urb); + } + } + if (i1480u->rx_skb != NULL) + dev_kfree_skb(i1480u->rx_skb); +} + +static +void i1480u_rx_unlink_urbs(struct i1480u *i1480u) +{ + int cnt; + for (cnt = 0; cnt < i1480u_RX_BUFS; cnt++) { + if (i1480u->rx_buf[cnt].urb) + usb_unlink_urb(i1480u->rx_buf[cnt].urb); + } +} + +/** Fix an out-of-sequence packet */ +#define i1480u_fix(i1480u, msg...) \ +do { \ + if (printk_ratelimit()) \ + dev_err(&i1480u->usb_iface->dev, msg); \ + dev_kfree_skb_irq(i1480u->rx_skb); \ + i1480u->rx_skb = NULL; \ + i1480u->rx_untd_pkt_size = 0; \ +} while (0) + + +/** Drop an out-of-sequence packet */ +#define i1480u_drop(i1480u, msg...) \ +do { \ + if (printk_ratelimit()) \ + dev_err(&i1480u->usb_iface->dev, msg); \ + i1480u->stats.rx_dropped++; \ +} while (0) + + + + +/** Finalizes setting up the SKB and delivers it + * + * We first pass the incoming frame to WLP substack for verification. It + * may also be a WLP association frame in which case WLP will take over the + * processing. If WLP does not take it over it will still verify it, if the + * frame is invalid the skb will be freed by WLP and we will not continue + * parsing. + * */ +static +void i1480u_skb_deliver(struct i1480u *i1480u) +{ + int should_parse; + struct net_device *net_dev = i1480u->net_dev; + struct device *dev = &i1480u->usb_iface->dev; + + d_printf(6, dev, "RX delivered pre skb(%p), %u bytes\n", + i1480u->rx_skb, i1480u->rx_skb->len); + d_dump(7, dev, i1480u->rx_skb->data, i1480u->rx_skb->len); + should_parse = wlp_receive_frame(dev, &i1480u->wlp, i1480u->rx_skb, + &i1480u->rx_srcaddr); + if (!should_parse) + goto out; + i1480u->rx_skb->protocol = eth_type_trans(i1480u->rx_skb, net_dev); + d_printf(5, dev, "RX delivered skb(%p), %u bytes\n", + i1480u->rx_skb, i1480u->rx_skb->len); + d_dump(7, dev, i1480u->rx_skb->data, + i1480u->rx_skb->len > 72 ? 72 : i1480u->rx_skb->len); + i1480u->stats.rx_packets++; + i1480u->stats.rx_bytes += i1480u->rx_untd_pkt_size; + net_dev->last_rx = jiffies; + /* FIXME: flow control: check netif_rx() retval */ + + netif_rx(i1480u->rx_skb); /* deliver */ +out: + i1480u->rx_skb = NULL; + i1480u->rx_untd_pkt_size = 0; +} + + +/** + * Process a buffer of data received from the USB RX endpoint + * + * First fragment arrives with next or last fragment. All other fragments + * arrive alone. + * + * /me hates long functions. + */ +static +void i1480u_rx_buffer(struct i1480u_rx_buf *rx_buf) +{ + unsigned pkt_completed = 0; /* !0 when we got all pkt fragments */ + size_t untd_hdr_size, untd_frg_size; + size_t i1480u_hdr_size; + struct wlp_rx_hdr *i1480u_hdr = NULL; + + struct i1480u *i1480u = rx_buf->i1480u; + struct sk_buff *skb = rx_buf->data; + int size_left = rx_buf->urb->actual_length; + void *ptr = rx_buf->urb->transfer_buffer; /* also rx_buf->data->data */ + struct untd_hdr *untd_hdr; + + struct net_device *net_dev = i1480u->net_dev; + struct device *dev = &i1480u->usb_iface->dev; + struct sk_buff *new_skb; + +#if 0 + dev_fnstart(dev, + "(i1480u %p ptr %p size_left %zu)\n", i1480u, ptr, size_left); + dev_err(dev, "RX packet, %zu bytes\n", size_left); + dump_bytes(dev, ptr, size_left); +#endif + i1480u_hdr_size = sizeof(struct wlp_rx_hdr); + + while (size_left > 0) { + if (pkt_completed) { + i1480u_drop(i1480u, "RX: fragment follows completed" + "packet in same buffer. Dropping\n"); + break; + } + untd_hdr = ptr; + if (size_left < sizeof(*untd_hdr)) { /* Check the UNTD header */ + i1480u_drop(i1480u, "RX: short UNTD header! Dropping\n"); + goto out; + } + if (unlikely(untd_hdr_rx_tx(untd_hdr) == 0)) { /* Paranoia: TX set? */ + i1480u_drop(i1480u, "RX: TX bit set! Dropping\n"); + goto out; + } + switch (untd_hdr_type(untd_hdr)) { /* Check the UNTD header type */ + case i1480u_PKT_FRAG_1ST: { + struct untd_hdr_1st *untd_hdr_1st = (void *) untd_hdr; + dev_dbg(dev, "1st fragment\n"); + untd_hdr_size = sizeof(struct untd_hdr_1st); + if (i1480u->rx_skb != NULL) + i1480u_fix(i1480u, "RX: 1st fragment out of " + "sequence! Fixing\n"); + if (size_left < untd_hdr_size + i1480u_hdr_size) { + i1480u_drop(i1480u, "RX: short 1st fragment! " + "Dropping\n"); + goto out; + } + i1480u->rx_untd_pkt_size = le16_to_cpu(untd_hdr->len) + - i1480u_hdr_size; + untd_frg_size = le16_to_cpu(untd_hdr_1st->fragment_len); + if (size_left < untd_hdr_size + untd_frg_size) { + i1480u_drop(i1480u, + "RX: short payload! Dropping\n"); + goto out; + } + i1480u->rx_skb = skb; + i1480u_hdr = (void *) untd_hdr_1st + untd_hdr_size; + i1480u->rx_srcaddr = i1480u_hdr->srcaddr; + skb_put(i1480u->rx_skb, untd_hdr_size + untd_frg_size); + skb_pull(i1480u->rx_skb, untd_hdr_size + i1480u_hdr_size); + stats_add_sample(&i1480u->lqe_stats, (s8) i1480u_hdr->LQI - 7); + stats_add_sample(&i1480u->rssi_stats, i1480u_hdr->RSSI + 18); + rx_buf->data = NULL; /* need to create new buffer */ + break; + } + case i1480u_PKT_FRAG_NXT: { + dev_dbg(dev, "nxt fragment\n"); + untd_hdr_size = sizeof(struct untd_hdr_rst); + if (i1480u->rx_skb == NULL) { + i1480u_drop(i1480u, "RX: next fragment out of " + "sequence! Dropping\n"); + goto out; + } + if (size_left < untd_hdr_size) { + i1480u_drop(i1480u, "RX: short NXT fragment! " + "Dropping\n"); + goto out; + } + untd_frg_size = le16_to_cpu(untd_hdr->len); + if (size_left < untd_hdr_size + untd_frg_size) { + i1480u_drop(i1480u, + "RX: short payload! Dropping\n"); + goto out; + } + memmove(skb_put(i1480u->rx_skb, untd_frg_size), + ptr + untd_hdr_size, untd_frg_size); + break; + } + case i1480u_PKT_FRAG_LST: { + dev_dbg(dev, "Lst fragment\n"); + untd_hdr_size = sizeof(struct untd_hdr_rst); + if (i1480u->rx_skb == NULL) { + i1480u_drop(i1480u, "RX: last fragment out of " + "sequence! Dropping\n"); + goto out; + } + if (size_left < untd_hdr_size) { + i1480u_drop(i1480u, "RX: short LST fragment! " + "Dropping\n"); + goto out; + } + untd_frg_size = le16_to_cpu(untd_hdr->len); + if (size_left < untd_frg_size + untd_hdr_size) { + i1480u_drop(i1480u, + "RX: short payload! Dropping\n"); + goto out; + } + memmove(skb_put(i1480u->rx_skb, untd_frg_size), + ptr + untd_hdr_size, untd_frg_size); + pkt_completed = 1; + break; + } + case i1480u_PKT_FRAG_CMP: { + dev_dbg(dev, "cmp fragment\n"); + untd_hdr_size = sizeof(struct untd_hdr_cmp); + if (i1480u->rx_skb != NULL) + i1480u_fix(i1480u, "RX: fix out-of-sequence CMP" + " fragment!\n"); + if (size_left < untd_hdr_size + i1480u_hdr_size) { + i1480u_drop(i1480u, "RX: short CMP fragment! " + "Dropping\n"); + goto out; + } + i1480u->rx_untd_pkt_size = le16_to_cpu(untd_hdr->len); + untd_frg_size = i1480u->rx_untd_pkt_size; + if (size_left < i1480u->rx_untd_pkt_size + untd_hdr_size) { + i1480u_drop(i1480u, + "RX: short payload! Dropping\n"); + goto out; + } + i1480u->rx_skb = skb; + i1480u_hdr = (void *) untd_hdr + untd_hdr_size; + i1480u->rx_srcaddr = i1480u_hdr->srcaddr; + stats_add_sample(&i1480u->lqe_stats, (s8) i1480u_hdr->LQI - 7); + stats_add_sample(&i1480u->rssi_stats, i1480u_hdr->RSSI + 18); + skb_put(i1480u->rx_skb, untd_hdr_size + i1480u->rx_untd_pkt_size); + skb_pull(i1480u->rx_skb, untd_hdr_size + i1480u_hdr_size); + rx_buf->data = NULL; /* for hand off skb to network stack */ + pkt_completed = 1; + i1480u->rx_untd_pkt_size -= i1480u_hdr_size; /* accurate stat */ + break; + } + default: + i1480u_drop(i1480u, "RX: unknown packet type %u! " + "Dropping\n", untd_hdr_type(untd_hdr)); + goto out; + } + size_left -= untd_hdr_size + untd_frg_size; + if (size_left > 0) + ptr += untd_hdr_size + untd_frg_size; + } + if (pkt_completed) + i1480u_skb_deliver(i1480u); +out: + /* recreate needed RX buffers*/ + if (rx_buf->data == NULL) { + /* buffer is being used to receive packet, create new */ + new_skb = dev_alloc_skb(i1480u_MAX_RX_PKT_SIZE); + if (!new_skb) { + if (printk_ratelimit()) + dev_err(dev, + "RX: cannot allocate RX buffer\n"); + } else { + new_skb->dev = net_dev; + new_skb->ip_summed = CHECKSUM_NONE; + skb_reserve(new_skb, 2); + rx_buf->data = new_skb; + } + } + return; +} + + +/** + * Called when an RX URB has finished receiving or has found some kind + * of error condition. + * + * LIMITATIONS: + * + * - We read USB-transfers, each transfer contains a SINGLE fragment + * (can contain a complete packet, or a 1st, next, or last fragment + * of a packet). + * Looks like a transfer can contain more than one fragment (07/18/06) + * + * - Each transfer buffer is the size of the maximum packet size (minus + * headroom), i1480u_MAX_PKT_SIZE - 2 + * + * - We always read the full USB-transfer, no partials. + * + * - Each transfer is read directly into a skb. This skb will be used to + * send data to the upper layers if it is the first fragment or a complete + * packet. In the other cases the data will be copied from the skb to + * another skb that is being prepared for the upper layers from a prev + * first fragment. + * + * It is simply too much of a pain. Gosh, there should be a unified + * SG infrastructure for *everything* [so that I could declare a SG + * buffer, pass it to USB for receiving, append some space to it if + * I wish, receive more until I have the whole chunk, adapt + * pointers on each fragment to remove hardware headers and then + * attach that to an skbuff and netif_rx()]. + */ +void i1480u_rx_cb(struct urb *urb) +{ + int result; + int do_parse_buffer = 1; + struct i1480u_rx_buf *rx_buf = urb->context; + struct i1480u *i1480u = rx_buf->i1480u; + struct device *dev = &i1480u->usb_iface->dev; + unsigned long flags; + u8 rx_buf_idx = rx_buf - i1480u->rx_buf; + + switch (urb->status) { + case 0: + break; + case -ECONNRESET: /* Not an error, but a controlled situation; */ + case -ENOENT: /* (we killed the URB)...so, no broadcast */ + case -ESHUTDOWN: /* going away! */ + dev_err(dev, "RX URB[%u]: goind down %d\n", + rx_buf_idx, urb->status); + goto error; + default: + dev_err(dev, "RX URB[%u]: unknown status %d\n", + rx_buf_idx, urb->status); + if (edc_inc(&i1480u->rx_errors, EDC_MAX_ERRORS, + EDC_ERROR_TIMEFRAME)) { + dev_err(dev, "RX: max acceptable errors exceeded," + " resetting device.\n"); + i1480u_rx_unlink_urbs(i1480u); + wlp_reset_all(&i1480u->wlp); + goto error; + } + do_parse_buffer = 0; + break; + } + spin_lock_irqsave(&i1480u->lock, flags); + /* chew the data fragments, extract network packets */ + if (do_parse_buffer) { + i1480u_rx_buffer(rx_buf); + if (rx_buf->data) { + rx_buf->urb->transfer_buffer = rx_buf->data->data; + result = usb_submit_urb(rx_buf->urb, GFP_ATOMIC); + if (result < 0) { + dev_err(dev, "RX URB[%u]: cannot submit %d\n", + rx_buf_idx, result); + } + } + } + spin_unlock_irqrestore(&i1480u->lock, flags); +error: + return; +} + diff --git a/drivers/uwb/i1480/i1480u-wlp/sysfs.c b/drivers/uwb/i1480/i1480u-wlp/sysfs.c new file mode 100644 index 000000000000..a1d8ca6ac935 --- /dev/null +++ b/drivers/uwb/i1480/i1480u-wlp/sysfs.c @@ -0,0 +1,408 @@ +/* + * WUSB Wire Adapter: WLP interface + * Sysfs interfaces + * + * Copyright (C) 2005-2006 Intel Corporation + * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + * + * + * FIXME: docs + */ + +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/uwb/debug.h> +#include <linux/device.h> +#include "i1480u-wlp.h" + + +/** + * + * @dev: Class device from the net_device; assumed refcnted. + * + * Yes, I don't lock--we assume it is refcounted and I am getting a + * single byte value that is kind of atomic to read. + */ +ssize_t uwb_phy_rate_show(const struct wlp_options *options, char *buf) +{ + return sprintf(buf, "%u\n", + wlp_tx_hdr_phy_rate(&options->def_tx_hdr)); +} +EXPORT_SYMBOL_GPL(uwb_phy_rate_show); + + +ssize_t uwb_phy_rate_store(struct wlp_options *options, + const char *buf, size_t size) +{ + ssize_t result; + unsigned rate; + + result = sscanf(buf, "%u\n", &rate); + if (result != 1) { + result = -EINVAL; + goto out; + } + result = -EINVAL; + if (rate >= UWB_PHY_RATE_INVALID) + goto out; + wlp_tx_hdr_set_phy_rate(&options->def_tx_hdr, rate); + result = 0; +out: + return result < 0 ? result : size; +} +EXPORT_SYMBOL_GPL(uwb_phy_rate_store); + + +ssize_t uwb_rts_cts_show(const struct wlp_options *options, char *buf) +{ + return sprintf(buf, "%u\n", + wlp_tx_hdr_rts_cts(&options->def_tx_hdr)); +} +EXPORT_SYMBOL_GPL(uwb_rts_cts_show); + + +ssize_t uwb_rts_cts_store(struct wlp_options *options, + const char *buf, size_t size) +{ + ssize_t result; + unsigned value; + + result = sscanf(buf, "%u\n", &value); + if (result != 1) { + result = -EINVAL; + goto out; + } + result = -EINVAL; + wlp_tx_hdr_set_rts_cts(&options->def_tx_hdr, !!value); + result = 0; +out: + return result < 0 ? result : size; +} +EXPORT_SYMBOL_GPL(uwb_rts_cts_store); + + +ssize_t uwb_ack_policy_show(const struct wlp_options *options, char *buf) +{ + return sprintf(buf, "%u\n", + wlp_tx_hdr_ack_policy(&options->def_tx_hdr)); +} +EXPORT_SYMBOL_GPL(uwb_ack_policy_show); + + +ssize_t uwb_ack_policy_store(struct wlp_options *options, + const char *buf, size_t size) +{ + ssize_t result; + unsigned value; + + result = sscanf(buf, "%u\n", &value); + if (result != 1 || value > UWB_ACK_B_REQ) { + result = -EINVAL; + goto out; + } + wlp_tx_hdr_set_ack_policy(&options->def_tx_hdr, value); + result = 0; +out: + return result < 0 ? result : size; +} +EXPORT_SYMBOL_GPL(uwb_ack_policy_store); + + +/** + * Show the PCA base priority. + * + * We can access without locking, as the value is (for now) orthogonal + * to other values. + */ +ssize_t uwb_pca_base_priority_show(const struct wlp_options *options, + char *buf) +{ + return sprintf(buf, "%u\n", + options->pca_base_priority); +} +EXPORT_SYMBOL_GPL(uwb_pca_base_priority_show); + + +/** + * Set the PCA base priority. + * + * We can access without locking, as the value is (for now) orthogonal + * to other values. + */ +ssize_t uwb_pca_base_priority_store(struct wlp_options *options, + const char *buf, size_t size) +{ + ssize_t result = -EINVAL; + u8 pca_base_priority; + + result = sscanf(buf, "%hhu\n", &pca_base_priority); + if (result != 1) { + result = -EINVAL; + goto out; + } + result = -EINVAL; + if (pca_base_priority >= 8) + goto out; + options->pca_base_priority = pca_base_priority; + /* Update TX header if we are currently using PCA. */ + if (result >= 0 && (wlp_tx_hdr_delivery_id_type(&options->def_tx_hdr) & WLP_DRP) == 0) + wlp_tx_hdr_set_delivery_id_type(&options->def_tx_hdr, options->pca_base_priority); + result = 0; +out: + return result < 0 ? result : size; +} +EXPORT_SYMBOL_GPL(uwb_pca_base_priority_store); + +/** + * Show current inflight values + * + * Will print the current MAX and THRESHOLD values for the basic flow + * control. In addition it will report how many times the TX queue needed + * to be restarted since the last time this query was made. + */ +static ssize_t wlp_tx_inflight_show(struct i1480u_tx_inflight *inflight, + char *buf) +{ + ssize_t result; + unsigned long sec_elapsed = (jiffies - inflight->restart_ts)/HZ; + unsigned long restart_count = atomic_read(&inflight->restart_count); + + result = scnprintf(buf, PAGE_SIZE, "%lu %lu %d %lu %lu %lu\n" + "#read: threshold max inflight_count restarts " + "seconds restarts/sec\n" + "#write: threshold max\n", + inflight->threshold, inflight->max, + atomic_read(&inflight->count), + restart_count, sec_elapsed, + sec_elapsed == 0 ? 0 : restart_count/sec_elapsed); + inflight->restart_ts = jiffies; + atomic_set(&inflight->restart_count, 0); + return result; +} + +static +ssize_t wlp_tx_inflight_store(struct i1480u_tx_inflight *inflight, + const char *buf, size_t size) +{ + unsigned long in_threshold, in_max; + ssize_t result; + result = sscanf(buf, "%lu %lu", &in_threshold, &in_max); + if (result != 2) + return -EINVAL; + if (in_max <= in_threshold) + return -EINVAL; + inflight->max = in_max; + inflight->threshold = in_threshold; + return size; +} +/* + * Glue (or function adaptors) for accesing info on sysfs + * + * [we need this indirection because the PCI driver does almost the + * same] + * + * Linux 2.6.21 changed how 'struct netdevice' does attributes (from + * having a 'struct class_dev' to having a 'struct device'). That is + * quite of a pain. + * + * So we try to abstract that here. i1480u_SHOW() and i1480u_STORE() + * create adaptors for extracting the 'struct i1480u' from a 'struct + * dev' and calling a function for doing a sysfs operation (as we have + * them factorized already). i1480u_ATTR creates the attribute file + * (CLASS_DEVICE_ATTR or DEVICE_ATTR) and i1480u_ATTR_NAME produces a + * class_device_attr_NAME or device_attr_NAME (for group registration). + */ +#include <linux/version.h> + +#define i1480u_SHOW(name, fn, param) \ +static ssize_t i1480u_show_##name(struct device *dev, \ + struct device_attribute *attr,\ + char *buf) \ +{ \ + struct i1480u *i1480u = netdev_priv(to_net_dev(dev)); \ + return fn(&i1480u->param, buf); \ +} + +#define i1480u_STORE(name, fn, param) \ +static ssize_t i1480u_store_##name(struct device *dev, \ + struct device_attribute *attr,\ + const char *buf, size_t size)\ +{ \ + struct i1480u *i1480u = netdev_priv(to_net_dev(dev)); \ + return fn(&i1480u->param, buf, size); \ +} + +#define i1480u_ATTR(name, perm) static DEVICE_ATTR(name, perm, \ + i1480u_show_##name,\ + i1480u_store_##name) + +#define i1480u_ATTR_SHOW(name) static DEVICE_ATTR(name, \ + S_IRUGO, \ + i1480u_show_##name, NULL) + +#define i1480u_ATTR_NAME(a) (dev_attr_##a) + + +/* + * Sysfs adaptors + */ +i1480u_SHOW(uwb_phy_rate, uwb_phy_rate_show, options); +i1480u_STORE(uwb_phy_rate, uwb_phy_rate_store, options); +i1480u_ATTR(uwb_phy_rate, S_IRUGO | S_IWUSR); + +i1480u_SHOW(uwb_rts_cts, uwb_rts_cts_show, options); +i1480u_STORE(uwb_rts_cts, uwb_rts_cts_store, options); +i1480u_ATTR(uwb_rts_cts, S_IRUGO | S_IWUSR); + +i1480u_SHOW(uwb_ack_policy, uwb_ack_policy_show, options); +i1480u_STORE(uwb_ack_policy, uwb_ack_policy_store, options); +i1480u_ATTR(uwb_ack_policy, S_IRUGO | S_IWUSR); + +i1480u_SHOW(uwb_pca_base_priority, uwb_pca_base_priority_show, options); +i1480u_STORE(uwb_pca_base_priority, uwb_pca_base_priority_store, options); +i1480u_ATTR(uwb_pca_base_priority, S_IRUGO | S_IWUSR); + +i1480u_SHOW(wlp_eda, wlp_eda_show, wlp); +i1480u_STORE(wlp_eda, wlp_eda_store, wlp); +i1480u_ATTR(wlp_eda, S_IRUGO | S_IWUSR); + +i1480u_SHOW(wlp_uuid, wlp_uuid_show, wlp); +i1480u_STORE(wlp_uuid, wlp_uuid_store, wlp); +i1480u_ATTR(wlp_uuid, S_IRUGO | S_IWUSR); + +i1480u_SHOW(wlp_dev_name, wlp_dev_name_show, wlp); +i1480u_STORE(wlp_dev_name, wlp_dev_name_store, wlp); +i1480u_ATTR(wlp_dev_name, S_IRUGO | S_IWUSR); + +i1480u_SHOW(wlp_dev_manufacturer, wlp_dev_manufacturer_show, wlp); +i1480u_STORE(wlp_dev_manufacturer, wlp_dev_manufacturer_store, wlp); +i1480u_ATTR(wlp_dev_manufacturer, S_IRUGO | S_IWUSR); + +i1480u_SHOW(wlp_dev_model_name, wlp_dev_model_name_show, wlp); +i1480u_STORE(wlp_dev_model_name, wlp_dev_model_name_store, wlp); +i1480u_ATTR(wlp_dev_model_name, S_IRUGO | S_IWUSR); + +i1480u_SHOW(wlp_dev_model_nr, wlp_dev_model_nr_show, wlp); +i1480u_STORE(wlp_dev_model_nr, wlp_dev_model_nr_store, wlp); +i1480u_ATTR(wlp_dev_model_nr, S_IRUGO | S_IWUSR); + +i1480u_SHOW(wlp_dev_serial, wlp_dev_serial_show, wlp); +i1480u_STORE(wlp_dev_serial, wlp_dev_serial_store, wlp); +i1480u_ATTR(wlp_dev_serial, S_IRUGO | S_IWUSR); + +i1480u_SHOW(wlp_dev_prim_category, wlp_dev_prim_category_show, wlp); +i1480u_STORE(wlp_dev_prim_category, wlp_dev_prim_category_store, wlp); +i1480u_ATTR(wlp_dev_prim_category, S_IRUGO | S_IWUSR); + +i1480u_SHOW(wlp_dev_prim_OUI, wlp_dev_prim_OUI_show, wlp); +i1480u_STORE(wlp_dev_prim_OUI, wlp_dev_prim_OUI_store, wlp); +i1480u_ATTR(wlp_dev_prim_OUI, S_IRUGO | S_IWUSR); + +i1480u_SHOW(wlp_dev_prim_OUI_sub, wlp_dev_prim_OUI_sub_show, wlp); +i1480u_STORE(wlp_dev_prim_OUI_sub, wlp_dev_prim_OUI_sub_store, wlp); +i1480u_ATTR(wlp_dev_prim_OUI_sub, S_IRUGO | S_IWUSR); + +i1480u_SHOW(wlp_dev_prim_subcat, wlp_dev_prim_subcat_show, wlp); +i1480u_STORE(wlp_dev_prim_subcat, wlp_dev_prim_subcat_store, wlp); +i1480u_ATTR(wlp_dev_prim_subcat, S_IRUGO | S_IWUSR); + +i1480u_SHOW(wlp_neighborhood, wlp_neighborhood_show, wlp); +i1480u_ATTR_SHOW(wlp_neighborhood); + +i1480u_SHOW(wss_activate, wlp_wss_activate_show, wlp.wss); +i1480u_STORE(wss_activate, wlp_wss_activate_store, wlp.wss); +i1480u_ATTR(wss_activate, S_IRUGO | S_IWUSR); + +/* + * Show the (min, max, avg) Line Quality Estimate (LQE, in dB) as over + * the last 256 received WLP frames (ECMA-368 13.3). + * + * [the -7dB that have to be substracted from the LQI to make the LQE + * are already taken into account]. + */ +i1480u_SHOW(wlp_lqe, stats_show, lqe_stats); +i1480u_STORE(wlp_lqe, stats_store, lqe_stats); +i1480u_ATTR(wlp_lqe, S_IRUGO | S_IWUSR); + +/* + * Show the Receive Signal Strength Indicator averaged over all the + * received WLP frames (ECMA-368 13.3). Still is not clear what + * this value is, but is kind of a percentage of the signal strength + * at the antenna. + */ +i1480u_SHOW(wlp_rssi, stats_show, rssi_stats); +i1480u_STORE(wlp_rssi, stats_store, rssi_stats); +i1480u_ATTR(wlp_rssi, S_IRUGO | S_IWUSR); + +/** + * We maintain a basic flow control counter. "count" how many TX URBs are + * outstanding. Only allow "max" + * TX URBs to be outstanding. If this value is reached the queue will be + * stopped. The queue will be restarted when there are + * "threshold" URBs outstanding. + */ +i1480u_SHOW(wlp_tx_inflight, wlp_tx_inflight_show, tx_inflight); +i1480u_STORE(wlp_tx_inflight, wlp_tx_inflight_store, tx_inflight); +i1480u_ATTR(wlp_tx_inflight, S_IRUGO | S_IWUSR); + +static struct attribute *i1480u_attrs[] = { + &i1480u_ATTR_NAME(uwb_phy_rate).attr, + &i1480u_ATTR_NAME(uwb_rts_cts).attr, + &i1480u_ATTR_NAME(uwb_ack_policy).attr, + &i1480u_ATTR_NAME(uwb_pca_base_priority).attr, + &i1480u_ATTR_NAME(wlp_lqe).attr, + &i1480u_ATTR_NAME(wlp_rssi).attr, + &i1480u_ATTR_NAME(wlp_eda).attr, + &i1480u_ATTR_NAME(wlp_uuid).attr, + &i1480u_ATTR_NAME(wlp_dev_name).attr, + &i1480u_ATTR_NAME(wlp_dev_manufacturer).attr, + &i1480u_ATTR_NAME(wlp_dev_model_name).attr, + &i1480u_ATTR_NAME(wlp_dev_model_nr).attr, + &i1480u_ATTR_NAME(wlp_dev_serial).attr, + &i1480u_ATTR_NAME(wlp_dev_prim_category).attr, + &i1480u_ATTR_NAME(wlp_dev_prim_OUI).attr, + &i1480u_ATTR_NAME(wlp_dev_prim_OUI_sub).attr, + &i1480u_ATTR_NAME(wlp_dev_prim_subcat).attr, + &i1480u_ATTR_NAME(wlp_neighborhood).attr, + &i1480u_ATTR_NAME(wss_activate).attr, + &i1480u_ATTR_NAME(wlp_tx_inflight).attr, + NULL, +}; + +static struct attribute_group i1480u_attr_group = { + .name = NULL, /* we want them in the same directory */ + .attrs = i1480u_attrs, +}; + +int i1480u_sysfs_setup(struct i1480u *i1480u) +{ + int result; + struct device *dev = &i1480u->usb_iface->dev; + result = sysfs_create_group(&i1480u->net_dev->dev.kobj, + &i1480u_attr_group); + if (result < 0) + dev_err(dev, "cannot initialize sysfs attributes: %d\n", + result); + return result; +} + + +void i1480u_sysfs_release(struct i1480u *i1480u) +{ + sysfs_remove_group(&i1480u->net_dev->dev.kobj, + &i1480u_attr_group); +} diff --git a/drivers/uwb/i1480/i1480u-wlp/tx.c b/drivers/uwb/i1480/i1480u-wlp/tx.c new file mode 100644 index 000000000000..3426bfb68240 --- /dev/null +++ b/drivers/uwb/i1480/i1480u-wlp/tx.c @@ -0,0 +1,632 @@ +/* + * WUSB Wire Adapter: WLP interface + * Deal with TX (massaging data to transmit, handling it) + * + * Copyright (C) 2005-2006 Intel Corporation + * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + * + * + * Transmission engine. Get an skb, create from that a WLP transmit + * context, add a WLP TX header (which we keep prefilled in the + * device's instance), fill out the target-specific fields and + * fire it. + * + * ROADMAP: + * + * Entry points: + * + * i1480u_tx_release(): called by i1480u_disconnect() to release + * pending tx contexts. + * + * i1480u_tx_cb(): callback for TX contexts (USB URBs) + * i1480u_tx_destroy(): + * + * i1480u_tx_timeout(): called for timeout handling from the + * network stack. + * + * i1480u_hard_start_xmit(): called for transmitting an skb from + * the network stack. Will interact with WLP + * substack to verify and prepare frame. + * i1480u_xmit_frame(): actual transmission on hardware + * + * i1480u_tx_create() Creates TX context + * i1480u_tx_create_1() For packets in 1 fragment + * i1480u_tx_create_n() For packets in >1 fragments + * + * TODO: + * + * - FIXME: rewrite using usb_sg_*(), add asynch support to + * usb_sg_*(). It might not make too much sense as most of + * the times the MTU will be smaller than one page... + */ + +#include "i1480u-wlp.h" +#define D_LOCAL 5 +#include <linux/uwb/debug.h> + +enum { + /* This is only for Next and Last TX packets */ + i1480u_MAX_PL_SIZE = i1480u_MAX_FRG_SIZE + - sizeof(struct untd_hdr_rst), +}; + +/** Free resources allocated to a i1480u tx context. */ +static +void i1480u_tx_free(struct i1480u_tx *wtx) +{ + kfree(wtx->buf); + if (wtx->skb) + dev_kfree_skb_irq(wtx->skb); + usb_free_urb(wtx->urb); + kfree(wtx); +} + +static +void i1480u_tx_destroy(struct i1480u *i1480u, struct i1480u_tx *wtx) +{ + unsigned long flags; + spin_lock_irqsave(&i1480u->tx_list_lock, flags); /* not active any more */ + list_del(&wtx->list_node); + i1480u_tx_free(wtx); + spin_unlock_irqrestore(&i1480u->tx_list_lock, flags); +} + +static +void i1480u_tx_unlink_urbs(struct i1480u *i1480u) +{ + unsigned long flags; + struct i1480u_tx *wtx, *next; + + spin_lock_irqsave(&i1480u->tx_list_lock, flags); + list_for_each_entry_safe(wtx, next, &i1480u->tx_list, list_node) { + usb_unlink_urb(wtx->urb); + } + spin_unlock_irqrestore(&i1480u->tx_list_lock, flags); +} + + +/** + * Callback for a completed tx USB URB. + * + * TODO: + * + * - FIXME: recover errors more gracefully + * - FIXME: handle NAKs (I dont think they come here) for flow ctl + */ +static +void i1480u_tx_cb(struct urb *urb) +{ + struct i1480u_tx *wtx = urb->context; + struct i1480u *i1480u = wtx->i1480u; + struct net_device *net_dev = i1480u->net_dev; + struct device *dev = &i1480u->usb_iface->dev; + unsigned long flags; + + switch (urb->status) { + case 0: + spin_lock_irqsave(&i1480u->lock, flags); + i1480u->stats.tx_packets++; + i1480u->stats.tx_bytes += urb->actual_length; + spin_unlock_irqrestore(&i1480u->lock, flags); + break; + case -ECONNRESET: /* Not an error, but a controlled situation; */ + case -ENOENT: /* (we killed the URB)...so, no broadcast */ + dev_dbg(dev, "notif endp: reset/noent %d\n", urb->status); + netif_stop_queue(net_dev); + break; + case -ESHUTDOWN: /* going away! */ + dev_dbg(dev, "notif endp: down %d\n", urb->status); + netif_stop_queue(net_dev); + break; + default: + dev_err(dev, "TX: unknown URB status %d\n", urb->status); + if (edc_inc(&i1480u->tx_errors, EDC_MAX_ERRORS, + EDC_ERROR_TIMEFRAME)) { + dev_err(dev, "TX: max acceptable errors exceeded." + "Reset device.\n"); + netif_stop_queue(net_dev); + i1480u_tx_unlink_urbs(i1480u); + wlp_reset_all(&i1480u->wlp); + } + break; + } + i1480u_tx_destroy(i1480u, wtx); + if (atomic_dec_return(&i1480u->tx_inflight.count) + <= i1480u->tx_inflight.threshold + && netif_queue_stopped(net_dev) + && i1480u->tx_inflight.threshold != 0) { + if (d_test(2) && printk_ratelimit()) + d_printf(2, dev, "Restart queue. \n"); + netif_start_queue(net_dev); + atomic_inc(&i1480u->tx_inflight.restart_count); + } + return; +} + + +/** + * Given a buffer that doesn't fit in a single fragment, create an + * scatter/gather structure for delivery to the USB pipe. + * + * Implements functionality of i1480u_tx_create(). + * + * @wtx: tx descriptor + * @skb: skb to send + * @gfp_mask: gfp allocation mask + * @returns: Pointer to @wtx if ok, NULL on error. + * + * Sorry, TOO LONG a function, but breaking it up is kind of hard + * + * This will break the buffer in chunks smaller than + * i1480u_MAX_FRG_SIZE (including the header) and add proper headers + * to each: + * + * 1st header \ + * i1480 tx header | fragment 1 + * fragment data / + * nxt header \ fragment 2 + * fragment data / + * .. + * .. + * last header \ fragment 3 + * last fragment data / + * + * This does not fill the i1480 TX header, it is left up to the + * caller to do that; you can get it from @wtx->wlp_tx_hdr. + * + * This function consumes the skb unless there is an error. + */ +static +int i1480u_tx_create_n(struct i1480u_tx *wtx, struct sk_buff *skb, + gfp_t gfp_mask) +{ + int result; + void *pl; + size_t pl_size; + + void *pl_itr, *buf_itr; + size_t pl_size_left, frgs, pl_size_1st, frg_pl_size = 0; + struct untd_hdr_1st *untd_hdr_1st; + struct wlp_tx_hdr *wlp_tx_hdr; + struct untd_hdr_rst *untd_hdr_rst; + + wtx->skb = NULL; + pl = skb->data; + pl_itr = pl; + pl_size = skb->len; + pl_size_left = pl_size; /* payload size */ + /* First fragment; fits as much as i1480u_MAX_FRG_SIZE minus + * the headers */ + pl_size_1st = i1480u_MAX_FRG_SIZE + - sizeof(struct untd_hdr_1st) - sizeof(struct wlp_tx_hdr); + BUG_ON(pl_size_1st > pl_size); + pl_size_left -= pl_size_1st; + /* The rest have an smaller header (no i1480 TX header). We + * need to break up the payload in blocks smaller than + * i1480u_MAX_PL_SIZE (payload excluding header). */ + frgs = (pl_size_left + i1480u_MAX_PL_SIZE - 1) / i1480u_MAX_PL_SIZE; + /* Allocate space for the new buffer. In this new buffer we'll + * place the headers followed by the data fragment, headers, + * data fragments, etc.. + */ + result = -ENOMEM; + wtx->buf_size = sizeof(*untd_hdr_1st) + + sizeof(*wlp_tx_hdr) + + frgs * sizeof(*untd_hdr_rst) + + pl_size; + wtx->buf = kmalloc(wtx->buf_size, gfp_mask); + if (wtx->buf == NULL) + goto error_buf_alloc; + + buf_itr = wtx->buf; /* We got the space, let's fill it up */ + /* Fill 1st fragment */ + untd_hdr_1st = buf_itr; + buf_itr += sizeof(*untd_hdr_1st); + untd_hdr_set_type(&untd_hdr_1st->hdr, i1480u_PKT_FRAG_1ST); + untd_hdr_set_rx_tx(&untd_hdr_1st->hdr, 0); + untd_hdr_1st->hdr.len = cpu_to_le16(pl_size + sizeof(*wlp_tx_hdr)); + untd_hdr_1st->fragment_len = + cpu_to_le16(pl_size_1st + sizeof(*wlp_tx_hdr)); + memset(untd_hdr_1st->padding, 0, sizeof(untd_hdr_1st->padding)); + /* Set up i1480 header info */ + wlp_tx_hdr = wtx->wlp_tx_hdr = buf_itr; + buf_itr += sizeof(*wlp_tx_hdr); + /* Copy the first fragment */ + memcpy(buf_itr, pl_itr, pl_size_1st); + pl_itr += pl_size_1st; + buf_itr += pl_size_1st; + + /* Now do each remaining fragment */ + result = -EINVAL; + while (pl_size_left > 0) { + d_printf(5, NULL, "ITR HDR: pl_size_left %zu buf_itr %zu\n", + pl_size_left, buf_itr - wtx->buf); + if (buf_itr + sizeof(*untd_hdr_rst) - wtx->buf + > wtx->buf_size) { + printk(KERN_ERR "BUG: no space for header\n"); + goto error_bug; + } + d_printf(5, NULL, "ITR HDR 2: pl_size_left %zu buf_itr %zu\n", + pl_size_left, buf_itr - wtx->buf); + untd_hdr_rst = buf_itr; + buf_itr += sizeof(*untd_hdr_rst); + if (pl_size_left > i1480u_MAX_PL_SIZE) { + frg_pl_size = i1480u_MAX_PL_SIZE; + untd_hdr_set_type(&untd_hdr_rst->hdr, i1480u_PKT_FRAG_NXT); + } else { + frg_pl_size = pl_size_left; + untd_hdr_set_type(&untd_hdr_rst->hdr, i1480u_PKT_FRAG_LST); + } + d_printf(5, NULL, + "ITR PL: pl_size_left %zu buf_itr %zu frg_pl_size %zu\n", + pl_size_left, buf_itr - wtx->buf, frg_pl_size); + untd_hdr_set_rx_tx(&untd_hdr_rst->hdr, 0); + untd_hdr_rst->hdr.len = cpu_to_le16(frg_pl_size); + untd_hdr_rst->padding = 0; + if (buf_itr + frg_pl_size - wtx->buf + > wtx->buf_size) { + printk(KERN_ERR "BUG: no space for payload\n"); + goto error_bug; + } + memcpy(buf_itr, pl_itr, frg_pl_size); + buf_itr += frg_pl_size; + pl_itr += frg_pl_size; + pl_size_left -= frg_pl_size; + d_printf(5, NULL, + "ITR PL 2: pl_size_left %zu buf_itr %zu frg_pl_size %zu\n", + pl_size_left, buf_itr - wtx->buf, frg_pl_size); + } + dev_kfree_skb_irq(skb); + return 0; + +error_bug: + printk(KERN_ERR + "BUG: skb %u bytes\n" + "BUG: frg_pl_size %zd i1480u_MAX_FRG_SIZE %u\n" + "BUG: buf_itr %zu buf_size %zu pl_size_left %zu\n", + skb->len, + frg_pl_size, i1480u_MAX_FRG_SIZE, + buf_itr - wtx->buf, wtx->buf_size, pl_size_left); + + kfree(wtx->buf); +error_buf_alloc: + return result; +} + + +/** + * Given a buffer that fits in a single fragment, fill out a @wtx + * struct for transmitting it down the USB pipe. + * + * Uses the fact that we have space reserved in front of the skbuff + * for hardware headers :] + * + * This does not fill the i1480 TX header, it is left up to the + * caller to do that; you can get it from @wtx->wlp_tx_hdr. + * + * @pl: pointer to payload data + * @pl_size: size of the payuload + * + * This function does not consume the @skb. + */ +static +int i1480u_tx_create_1(struct i1480u_tx *wtx, struct sk_buff *skb, + gfp_t gfp_mask) +{ + struct untd_hdr_cmp *untd_hdr_cmp; + struct wlp_tx_hdr *wlp_tx_hdr; + + wtx->buf = NULL; + wtx->skb = skb; + BUG_ON(skb_headroom(skb) < sizeof(*wlp_tx_hdr)); + wlp_tx_hdr = (void *) __skb_push(skb, sizeof(*wlp_tx_hdr)); + wtx->wlp_tx_hdr = wlp_tx_hdr; + BUG_ON(skb_headroom(skb) < sizeof(*untd_hdr_cmp)); + untd_hdr_cmp = (void *) __skb_push(skb, sizeof(*untd_hdr_cmp)); + + untd_hdr_set_type(&untd_hdr_cmp->hdr, i1480u_PKT_FRAG_CMP); + untd_hdr_set_rx_tx(&untd_hdr_cmp->hdr, 0); + untd_hdr_cmp->hdr.len = cpu_to_le16(skb->len - sizeof(*untd_hdr_cmp)); + untd_hdr_cmp->padding = 0; + return 0; +} + + +/** + * Given a skb to transmit, massage it to become palatable for the TX pipe + * + * This will break the buffer in chunks smaller than + * i1480u_MAX_FRG_SIZE and add proper headers to each. + * + * 1st header \ + * i1480 tx header | fragment 1 + * fragment data / + * nxt header \ fragment 2 + * fragment data / + * .. + * .. + * last header \ fragment 3 + * last fragment data / + * + * Each fragment will be always smaller or equal to i1480u_MAX_FRG_SIZE. + * + * If the first fragment is smaller than i1480u_MAX_FRG_SIZE, then the + * following is composed: + * + * complete header \ + * i1480 tx header | single fragment + * packet data / + * + * We were going to use s/g support, but because the interface is + * synch and at the end there is plenty of overhead to do it, it + * didn't seem that worth for data that is going to be smaller than + * one page. + */ +static +struct i1480u_tx *i1480u_tx_create(struct i1480u *i1480u, + struct sk_buff *skb, gfp_t gfp_mask) +{ + int result; + struct usb_endpoint_descriptor *epd; + int usb_pipe; + unsigned long flags; + + struct i1480u_tx *wtx; + const size_t pl_max_size = + i1480u_MAX_FRG_SIZE - sizeof(struct untd_hdr_cmp) + - sizeof(struct wlp_tx_hdr); + + wtx = kmalloc(sizeof(*wtx), gfp_mask); + if (wtx == NULL) + goto error_wtx_alloc; + wtx->urb = usb_alloc_urb(0, gfp_mask); + if (wtx->urb == NULL) + goto error_urb_alloc; + epd = &i1480u->usb_iface->cur_altsetting->endpoint[2].desc; + usb_pipe = usb_sndbulkpipe(i1480u->usb_dev, epd->bEndpointAddress); + /* Fits in a single complete packet or need to split? */ + if (skb->len > pl_max_size) { + result = i1480u_tx_create_n(wtx, skb, gfp_mask); + if (result < 0) + goto error_create; + usb_fill_bulk_urb(wtx->urb, i1480u->usb_dev, usb_pipe, + wtx->buf, wtx->buf_size, i1480u_tx_cb, wtx); + } else { + result = i1480u_tx_create_1(wtx, skb, gfp_mask); + if (result < 0) + goto error_create; + usb_fill_bulk_urb(wtx->urb, i1480u->usb_dev, usb_pipe, + skb->data, skb->len, i1480u_tx_cb, wtx); + } + spin_lock_irqsave(&i1480u->tx_list_lock, flags); + list_add(&wtx->list_node, &i1480u->tx_list); + spin_unlock_irqrestore(&i1480u->tx_list_lock, flags); + return wtx; + +error_create: + kfree(wtx->urb); +error_urb_alloc: + kfree(wtx); +error_wtx_alloc: + return NULL; +} + +/** + * Actual fragmentation and transmission of frame + * + * @wlp: WLP substack data structure + * @skb: To be transmitted + * @dst: Device address of destination + * @returns: 0 on success, <0 on failure + * + * This function can also be called directly (not just from + * hard_start_xmit), so we also check here if the interface is up before + * taking sending anything. + */ +int i1480u_xmit_frame(struct wlp *wlp, struct sk_buff *skb, + struct uwb_dev_addr *dst) +{ + int result = -ENXIO; + struct i1480u *i1480u = container_of(wlp, struct i1480u, wlp); + struct device *dev = &i1480u->usb_iface->dev; + struct net_device *net_dev = i1480u->net_dev; + struct i1480u_tx *wtx; + struct wlp_tx_hdr *wlp_tx_hdr; + static unsigned char dev_bcast[2] = { 0xff, 0xff }; +#if 0 + int lockup = 50; +#endif + + d_fnstart(6, dev, "(skb %p (%u), net_dev %p)\n", skb, skb->len, + net_dev); + BUG_ON(i1480u->wlp.rc == NULL); + if ((net_dev->flags & IFF_UP) == 0) + goto out; + result = -EBUSY; + if (atomic_read(&i1480u->tx_inflight.count) >= i1480u->tx_inflight.max) { + if (d_test(2) && printk_ratelimit()) + d_printf(2, dev, "Max frames in flight " + "stopping queue.\n"); + netif_stop_queue(net_dev); + goto error_max_inflight; + } + result = -ENOMEM; + wtx = i1480u_tx_create(i1480u, skb, GFP_ATOMIC); + if (unlikely(wtx == NULL)) { + if (printk_ratelimit()) + dev_err(dev, "TX: no memory for WLP TX URB," + "dropping packet (in flight %d)\n", + atomic_read(&i1480u->tx_inflight.count)); + netif_stop_queue(net_dev); + goto error_wtx_alloc; + } + wtx->i1480u = i1480u; + /* Fill out the i1480 header; @i1480u->def_tx_hdr read without + * locking. We do so because they are kind of orthogonal to + * each other (and thus not changed in an atomic batch). + * The ETH header is right after the WLP TX header. */ + wlp_tx_hdr = wtx->wlp_tx_hdr; + *wlp_tx_hdr = i1480u->options.def_tx_hdr; + wlp_tx_hdr->dstaddr = *dst; + if (!memcmp(&wlp_tx_hdr->dstaddr, dev_bcast, sizeof(dev_bcast)) + && (wlp_tx_hdr_delivery_id_type(wlp_tx_hdr) & WLP_DRP)) { + /*Broadcast message directed to DRP host. Send as best effort + * on PCA. */ + wlp_tx_hdr_set_delivery_id_type(wlp_tx_hdr, i1480u->options.pca_base_priority); + } + +#if 0 + dev_info(dev, "TX delivering skb -> USB, %zu bytes\n", skb->len); + dump_bytes(dev, skb->data, skb->len > 72 ? 72 : skb->len); +#endif +#if 0 + /* simulates a device lockup after every lockup# packets */ + if (lockup && ((i1480u->stats.tx_packets + 1) % lockup) == 0) { + /* Simulate a dropped transmit interrupt */ + net_dev->trans_start = jiffies; + netif_stop_queue(net_dev); + dev_err(dev, "Simulate lockup at %ld\n", jiffies); + return result; + } +#endif + + result = usb_submit_urb(wtx->urb, GFP_ATOMIC); /* Go baby */ + if (result < 0) { + dev_err(dev, "TX: cannot submit URB: %d\n", result); + /* We leave the freeing of skb to calling function */ + wtx->skb = NULL; + goto error_tx_urb_submit; + } + atomic_inc(&i1480u->tx_inflight.count); + net_dev->trans_start = jiffies; + d_fnend(6, dev, "(skb %p (%u), net_dev %p) = %d\n", skb, skb->len, + net_dev, result); + return result; + +error_tx_urb_submit: + i1480u_tx_destroy(i1480u, wtx); +error_wtx_alloc: +error_max_inflight: +out: + d_fnend(6, dev, "(skb %p (%u), net_dev %p) = %d\n", skb, skb->len, + net_dev, result); + return result; +} + + +/** + * Transmit an skb Called when an skbuf has to be transmitted + * + * The skb is first passed to WLP substack to ensure this is a valid + * frame. If valid the device address of destination will be filled and + * the WLP header prepended to the skb. If this step fails we fake sending + * the frame, if we return an error the network stack will just keep trying. + * + * Broadcast frames inside a WSS needs to be treated special as multicast is + * not supported. A broadcast frame is sent as unicast to each member of the + * WSS - this is done by the WLP substack when it finds a broadcast frame. + * So, we test if the WLP substack took over the skb and only transmit it + * if it has not (been taken over). + * + * @net_dev->xmit_lock is held + */ +int i1480u_hard_start_xmit(struct sk_buff *skb, struct net_device *net_dev) +{ + int result; + struct i1480u *i1480u = netdev_priv(net_dev); + struct device *dev = &i1480u->usb_iface->dev; + struct uwb_dev_addr dst; + + d_fnstart(6, dev, "(skb %p (%u), net_dev %p)\n", skb, skb->len, + net_dev); + BUG_ON(i1480u->wlp.rc == NULL); + if ((net_dev->flags & IFF_UP) == 0) + goto error; + result = wlp_prepare_tx_frame(dev, &i1480u->wlp, skb, &dst); + if (result < 0) { + dev_err(dev, "WLP verification of TX frame failed (%d). " + "Dropping packet.\n", result); + goto error; + } else if (result == 1) { + d_printf(6, dev, "WLP will transmit frame. \n"); + /* trans_start time will be set when WLP actually transmits + * the frame */ + goto out; + } + d_printf(6, dev, "Transmitting frame. \n"); + result = i1480u_xmit_frame(&i1480u->wlp, skb, &dst); + if (result < 0) { + dev_err(dev, "Frame TX failed (%d).\n", result); + goto error; + } + d_fnend(6, dev, "(skb %p (%u), net_dev %p) = %d\n", skb, skb->len, + net_dev, result); + return NETDEV_TX_OK; +error: + dev_kfree_skb_any(skb); + i1480u->stats.tx_dropped++; +out: + d_fnend(6, dev, "(skb %p (%u), net_dev %p) = %d\n", skb, skb->len, + net_dev, result); + return NETDEV_TX_OK; +} + + +/** + * Called when a pkt transmission doesn't complete in a reasonable period + * Device reset may sleep - do it outside of interrupt context (delayed) + */ +void i1480u_tx_timeout(struct net_device *net_dev) +{ + struct i1480u *i1480u = netdev_priv(net_dev); + + wlp_reset_all(&i1480u->wlp); +} + + +void i1480u_tx_release(struct i1480u *i1480u) +{ + unsigned long flags; + struct i1480u_tx *wtx, *next; + int count = 0, empty; + + spin_lock_irqsave(&i1480u->tx_list_lock, flags); + list_for_each_entry_safe(wtx, next, &i1480u->tx_list, list_node) { + count++; + usb_unlink_urb(wtx->urb); + } + spin_unlock_irqrestore(&i1480u->tx_list_lock, flags); + count = count*10; /* i1480ut 200ms per unlinked urb (intervals of 20ms) */ + /* + * We don't like this sollution too much (dirty as it is), but + * it is cheaper than putting a refcount on each i1480u_tx and + * i1480uting for all of them to go away... + * + * Called when no more packets can be added to tx_list + * so can i1480ut for it to be empty. + */ + while (1) { + spin_lock_irqsave(&i1480u->tx_list_lock, flags); + empty = list_empty(&i1480u->tx_list); + spin_unlock_irqrestore(&i1480u->tx_list_lock, flags); + if (empty) + break; + count--; + BUG_ON(count == 0); + msleep(20); + } +} diff --git a/drivers/uwb/ie.c b/drivers/uwb/ie.c new file mode 100644 index 000000000000..cf6f3d152b9d --- /dev/null +++ b/drivers/uwb/ie.c @@ -0,0 +1,541 @@ +/* + * Ultra Wide Band + * Information Element Handling + * + * Copyright (C) 2005-2006 Intel Corporation + * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> + * Reinette Chatre <reinette.chatre@intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + * + * + * FIXME: docs + */ + +#include "uwb-internal.h" +#define D_LOCAL 0 +#include <linux/uwb/debug.h> + +/** + * uwb_ie_next - get the next IE in a buffer + * @ptr: start of the buffer containing the IE data + * @len: length of the buffer + * + * Both @ptr and @len are updated so subsequent calls to uwb_ie_next() + * will get the next IE. + * + * NULL is returned (and @ptr and @len will not be updated) if there + * are no more IEs in the buffer or the buffer is too short. + */ +struct uwb_ie_hdr *uwb_ie_next(void **ptr, size_t *len) +{ + struct uwb_ie_hdr *hdr; + size_t ie_len; + + if (*len < sizeof(struct uwb_ie_hdr)) + return NULL; + + hdr = *ptr; + ie_len = sizeof(struct uwb_ie_hdr) + hdr->length; + + if (*len < ie_len) + return NULL; + + *ptr += ie_len; + *len -= ie_len; + + return hdr; +} +EXPORT_SYMBOL_GPL(uwb_ie_next); + +/** + * Get the IEs that a radio controller is sending in its beacon + * + * @uwb_rc: UWB Radio Controller + * @returns: Size read from the system + * + * We don't need to lock the uwb_rc's mutex because we don't modify + * anything. Once done with the iedata buffer, call + * uwb_rc_ie_release(iedata). Don't call kfree on it. + */ +ssize_t uwb_rc_get_ie(struct uwb_rc *uwb_rc, struct uwb_rc_evt_get_ie **pget_ie) +{ + ssize_t result; + struct device *dev = &uwb_rc->uwb_dev.dev; + struct uwb_rccb *cmd = NULL; + struct uwb_rceb *reply = NULL; + struct uwb_rc_evt_get_ie *get_ie; + + d_fnstart(3, dev, "(%p, %p)\n", uwb_rc, pget_ie); + result = -ENOMEM; + cmd = kzalloc(sizeof(*cmd), GFP_KERNEL); + if (cmd == NULL) + goto error_kzalloc; + cmd->bCommandType = UWB_RC_CET_GENERAL; + cmd->wCommand = cpu_to_le16(UWB_RC_CMD_GET_IE); + result = uwb_rc_vcmd(uwb_rc, "GET_IE", cmd, sizeof(*cmd), + UWB_RC_CET_GENERAL, UWB_RC_CMD_GET_IE, + &reply); + if (result < 0) + goto error_cmd; + get_ie = container_of(reply, struct uwb_rc_evt_get_ie, rceb); + if (result < sizeof(*get_ie)) { + dev_err(dev, "not enough data returned for decoding GET IE " + "(%zu bytes received vs %zu needed)\n", + result, sizeof(*get_ie)); + result = -EINVAL; + } else if (result < sizeof(*get_ie) + le16_to_cpu(get_ie->wIELength)) { + dev_err(dev, "not enough data returned for decoding GET IE " + "payload (%zu bytes received vs %zu needed)\n", result, + sizeof(*get_ie) + le16_to_cpu(get_ie->wIELength)); + result = -EINVAL; + } else + *pget_ie = get_ie; +error_cmd: + kfree(cmd); +error_kzalloc: + d_fnend(3, dev, "(%p, %p) = %d\n", uwb_rc, pget_ie, (int)result); + return result; +} +EXPORT_SYMBOL_GPL(uwb_rc_get_ie); + + +/* + * Given a pointer to an IE, print it in ASCII/hex followed by a new line + * + * @ie_hdr: pointer to the IE header. Length is in there, and it is + * guaranteed that the ie_hdr->length bytes following it are + * safely accesible. + * + * @_data: context data passed from uwb_ie_for_each(), an struct output_ctx + */ +int uwb_ie_dump_hex(struct uwb_dev *uwb_dev, const struct uwb_ie_hdr *ie_hdr, + size_t offset, void *_ctx) +{ + struct uwb_buf_ctx *ctx = _ctx; + const u8 *pl = (void *)(ie_hdr + 1); + u8 pl_itr; + + ctx->bytes += scnprintf(ctx->buf + ctx->bytes, ctx->size - ctx->bytes, + "%02x %02x ", (unsigned) ie_hdr->element_id, + (unsigned) ie_hdr->length); + pl_itr = 0; + while (pl_itr < ie_hdr->length && ctx->bytes < ctx->size) + ctx->bytes += scnprintf(ctx->buf + ctx->bytes, + ctx->size - ctx->bytes, + "%02x ", (unsigned) pl[pl_itr++]); + if (ctx->bytes < ctx->size) + ctx->buf[ctx->bytes++] = '\n'; + return 0; +} +EXPORT_SYMBOL_GPL(uwb_ie_dump_hex); + + +/** + * Verify that a pointer in a buffer points to valid IE + * + * @start: pointer to start of buffer in which IE appears + * @itr: pointer to IE inside buffer that will be verified + * @top: pointer to end of buffer + * + * @returns: 0 if IE is valid, <0 otherwise + * + * Verification involves checking that the buffer can contain a + * header and the amount of data reported in the IE header can be found in + * the buffer. + */ +static +int uwb_rc_ie_verify(struct uwb_dev *uwb_dev, const void *start, + const void *itr, const void *top) +{ + struct device *dev = &uwb_dev->dev; + const struct uwb_ie_hdr *ie_hdr; + + if (top - itr < sizeof(*ie_hdr)) { + dev_err(dev, "Bad IE: no data to decode header " + "(%zu bytes left vs %zu needed) at offset %zu\n", + top - itr, sizeof(*ie_hdr), itr - start); + return -EINVAL; + } + ie_hdr = itr; + itr += sizeof(*ie_hdr); + if (top - itr < ie_hdr->length) { + dev_err(dev, "Bad IE: not enough data for payload " + "(%zu bytes left vs %zu needed) at offset %zu\n", + top - itr, (size_t)ie_hdr->length, + (void *)ie_hdr - start); + return -EINVAL; + } + return 0; +} + + +/** + * Walk a buffer filled with consecutive IE's a buffer + * + * @uwb_dev: UWB device this IEs belong to (for err messages mainly) + * + * @fn: function to call with each IE; if it returns 0, we keep + * traversing the buffer. If it returns !0, we'll stop and return + * that value. + * + * @data: pointer passed to @fn + * + * @buf: buffer where the consecutive IEs are located + * + * @size: size of @buf + * + * Each IE is checked for basic correctness (there is space left for + * the header and the payload). If that test is failed, we stop + * processing. For every good IE, @fn is called. + */ +ssize_t uwb_ie_for_each(struct uwb_dev *uwb_dev, uwb_ie_f fn, void *data, + const void *buf, size_t size) +{ + ssize_t result = 0; + const struct uwb_ie_hdr *ie_hdr; + const void *itr = buf, *top = itr + size; + + while (itr < top) { + if (uwb_rc_ie_verify(uwb_dev, buf, itr, top) != 0) + break; + ie_hdr = itr; + itr += sizeof(*ie_hdr) + ie_hdr->length; + result = fn(uwb_dev, ie_hdr, itr - buf, data); + if (result != 0) + break; + } + return result; +} +EXPORT_SYMBOL_GPL(uwb_ie_for_each); + + +/** + * Replace all IEs currently being transmitted by a device + * + * @cmd: pointer to the SET-IE command with the IEs to set + * @size: size of @buf + */ +int uwb_rc_set_ie(struct uwb_rc *rc, struct uwb_rc_cmd_set_ie *cmd) +{ + int result; + struct device *dev = &rc->uwb_dev.dev; + struct uwb_rc_evt_set_ie reply; + + reply.rceb.bEventType = UWB_RC_CET_GENERAL; + reply.rceb.wEvent = UWB_RC_CMD_SET_IE; + result = uwb_rc_cmd(rc, "SET-IE", &cmd->rccb, + sizeof(*cmd) + le16_to_cpu(cmd->wIELength), + &reply.rceb, sizeof(reply)); + if (result < 0) + goto error_cmd; + else if (result != sizeof(reply)) { + dev_err(dev, "SET-IE: not enough data to decode reply " + "(%d bytes received vs %zu needed)\n", + result, sizeof(reply)); + result = -EIO; + } else if (reply.bResultCode != UWB_RC_RES_SUCCESS) { + dev_err(dev, "SET-IE: command execution failed: %s (%d)\n", + uwb_rc_strerror(reply.bResultCode), reply.bResultCode); + result = -EIO; + } else + result = 0; +error_cmd: + return result; +} + +/** + * Determine by IE id if IE is host settable + * WUSB 1.0 [8.6.2.8 Table 8.85] + * + * EXCEPTION: + * All but UWB_IE_WLP appears in Table 8.85 from WUSB 1.0. Setting this IE + * is required for the WLP substack to perform association with its WSS so + * we hope that the WUSB spec will be changed to reflect this. + */ +static +int uwb_rc_ie_is_host_settable(enum uwb_ie element_id) +{ + if (element_id == UWB_PCA_AVAILABILITY || + element_id == UWB_BP_SWITCH_IE || + element_id == UWB_MAC_CAPABILITIES_IE || + element_id == UWB_PHY_CAPABILITIES_IE || + element_id == UWB_APP_SPEC_PROBE_IE || + element_id == UWB_IDENTIFICATION_IE || + element_id == UWB_MASTER_KEY_ID_IE || + element_id == UWB_IE_WLP || + element_id == UWB_APP_SPEC_IE) + return 1; + return 0; +} + + +/** + * Extract Host Settable IEs from IE + * + * @ie_data: pointer to buffer containing all IEs + * @size: size of buffer + * + * @returns: length of buffer that only includes host settable IEs + * + * Given a buffer of IEs we move all Host Settable IEs to front of buffer + * by overwriting the IEs that are not Host Settable. + * Buffer length is adjusted accordingly. + */ +static +ssize_t uwb_rc_parse_host_settable_ie(struct uwb_dev *uwb_dev, + void *ie_data, size_t size) +{ + size_t new_len = size; + struct uwb_ie_hdr *ie_hdr; + size_t ie_length; + void *itr = ie_data, *top = itr + size; + + while (itr < top) { + if (uwb_rc_ie_verify(uwb_dev, ie_data, itr, top) != 0) + break; + ie_hdr = itr; + ie_length = sizeof(*ie_hdr) + ie_hdr->length; + if (uwb_rc_ie_is_host_settable(ie_hdr->element_id)) { + itr += ie_length; + } else { + memmove(itr, itr + ie_length, top - (itr + ie_length)); + new_len -= ie_length; + top -= ie_length; + } + } + return new_len; +} + + +/* Cleanup the whole IE management subsystem */ +void uwb_rc_ie_init(struct uwb_rc *uwb_rc) +{ + mutex_init(&uwb_rc->ies_mutex); +} + + +/** + * Set up cache for host settable IEs currently being transmitted + * + * First we just call GET-IE to get the current IEs being transmitted + * (or we workaround and pretend we did) and (because the format is + * the same) reuse that as the IE cache (with the command prefix, as + * explained in 'struct uwb_rc'). + * + * @returns: size of cache created + */ +ssize_t uwb_rc_ie_setup(struct uwb_rc *uwb_rc) +{ + struct device *dev = &uwb_rc->uwb_dev.dev; + ssize_t result; + size_t capacity; + struct uwb_rc_evt_get_ie *ie_info; + + d_fnstart(3, dev, "(%p)\n", uwb_rc); + mutex_lock(&uwb_rc->ies_mutex); + result = uwb_rc_get_ie(uwb_rc, &ie_info); + if (result < 0) + goto error_get_ie; + capacity = result; + d_printf(5, dev, "Got IEs %zu bytes (%zu long at %p)\n", result, + (size_t)le16_to_cpu(ie_info->wIELength), ie_info); + + /* Remove IEs that host should not set. */ + result = uwb_rc_parse_host_settable_ie(&uwb_rc->uwb_dev, + ie_info->IEData, le16_to_cpu(ie_info->wIELength)); + if (result < 0) + goto error_parse; + d_printf(5, dev, "purged non-settable IEs to %zu bytes\n", result); + uwb_rc->ies = (void *) ie_info; + uwb_rc->ies->rccb.bCommandType = UWB_RC_CET_GENERAL; + uwb_rc->ies->rccb.wCommand = cpu_to_le16(UWB_RC_CMD_SET_IE); + uwb_rc->ies_capacity = capacity; + d_printf(5, dev, "IE cache at %p %zu bytes, %zu capacity\n", + ie_info, result, capacity); + result = 0; +error_parse: +error_get_ie: + mutex_unlock(&uwb_rc->ies_mutex); + d_fnend(3, dev, "(%p) = %zu\n", uwb_rc, result); + return result; +} + + +/* Cleanup the whole IE management subsystem */ +void uwb_rc_ie_release(struct uwb_rc *uwb_rc) +{ + kfree(uwb_rc->ies); + uwb_rc->ies = NULL; + uwb_rc->ies_capacity = 0; +} + + +static +int __acc_size(struct uwb_dev *uwb_dev, const struct uwb_ie_hdr *ie_hdr, + size_t offset, void *_ctx) +{ + size_t *acc_size = _ctx; + *acc_size += sizeof(*ie_hdr) + ie_hdr->length; + d_printf(6, &uwb_dev->dev, "new acc size %zu\n", *acc_size); + return 0; +} + + +/** + * Add a new IE to IEs currently being transmitted by device + * + * @ies: the buffer containing the new IE or IEs to be added to + * the device's beacon. The buffer will be verified for + * consistence (meaning the headers should be right) and + * consistent with the buffer size. + * @size: size of @ies (in bytes, total buffer size) + * @returns: 0 if ok, <0 errno code on error + * + * According to WHCI 0.95 [4.13.6] the driver will only receive the RCEB + * after the device sent the first beacon that includes the IEs specified + * in the SET IE command. We thus cannot send this command if the device is + * not beaconing. Instead, a SET IE command will be sent later right after + * we start beaconing. + * + * Setting an IE on the device will overwrite all current IEs in device. So + * we take the current IEs being transmitted by the device, append the + * new one, and call SET IE with all the IEs needed. + * + * The local IE cache will only be updated with the new IE if SET IE + * completed successfully. + */ +int uwb_rc_ie_add(struct uwb_rc *uwb_rc, + const struct uwb_ie_hdr *ies, size_t size) +{ + int result = 0; + struct device *dev = &uwb_rc->uwb_dev.dev; + struct uwb_rc_cmd_set_ie *new_ies; + size_t ies_size, total_size, acc_size = 0; + + if (uwb_rc->ies == NULL) + return -ESHUTDOWN; + uwb_ie_for_each(&uwb_rc->uwb_dev, __acc_size, &acc_size, ies, size); + if (acc_size != size) { + dev_err(dev, "BUG: bad IEs, misconstructed headers " + "[%zu bytes reported vs %zu calculated]\n", + size, acc_size); + WARN_ON(1); + return -EINVAL; + } + mutex_lock(&uwb_rc->ies_mutex); + ies_size = le16_to_cpu(uwb_rc->ies->wIELength); + total_size = sizeof(*uwb_rc->ies) + ies_size; + if (total_size + size > uwb_rc->ies_capacity) { + d_printf(4, dev, "Reallocating IE cache from %p capacity %zu " + "to capacity %zu\n", uwb_rc->ies, uwb_rc->ies_capacity, + total_size + size); + new_ies = kzalloc(total_size + size, GFP_KERNEL); + if (new_ies == NULL) { + dev_err(dev, "No memory for adding new IE\n"); + result = -ENOMEM; + goto error_alloc; + } + memcpy(new_ies, uwb_rc->ies, total_size); + uwb_rc->ies_capacity = total_size + size; + kfree(uwb_rc->ies); + uwb_rc->ies = new_ies; + d_printf(4, dev, "New IE cache at %p capacity %zu\n", + uwb_rc->ies, uwb_rc->ies_capacity); + } + memcpy((void *)uwb_rc->ies + total_size, ies, size); + uwb_rc->ies->wIELength = cpu_to_le16(ies_size + size); + if (uwb_rc->beaconing != -1) { + result = uwb_rc_set_ie(uwb_rc, uwb_rc->ies); + if (result < 0) { + dev_err(dev, "Cannot set new IE on device: %d\n", + result); + uwb_rc->ies->wIELength = cpu_to_le16(ies_size); + } else + result = 0; + } + d_printf(4, dev, "IEs now occupy %hu bytes of %zu capacity at %p\n", + le16_to_cpu(uwb_rc->ies->wIELength), uwb_rc->ies_capacity, + uwb_rc->ies); +error_alloc: + mutex_unlock(&uwb_rc->ies_mutex); + return result; +} +EXPORT_SYMBOL_GPL(uwb_rc_ie_add); + + +/* + * Remove an IE from internal cache + * + * We are dealing with our internal IE cache so no need to verify that the + * IEs are valid (it has been done already). + * + * Should be called with ies_mutex held + * + * We do not break out once an IE is found in the cache. It is currently + * possible to have more than one IE with the same ID included in the + * beacon. We don't reallocate, we just mark the size smaller. + */ +static +int uwb_rc_ie_cache_rm(struct uwb_rc *uwb_rc, enum uwb_ie to_remove) +{ + struct uwb_ie_hdr *ie_hdr; + size_t new_len = le16_to_cpu(uwb_rc->ies->wIELength); + void *itr = uwb_rc->ies->IEData; + void *top = itr + new_len; + + while (itr < top) { + ie_hdr = itr; + if (ie_hdr->element_id != to_remove) { + itr += sizeof(*ie_hdr) + ie_hdr->length; + } else { + int ie_length; + ie_length = sizeof(*ie_hdr) + ie_hdr->length; + if (top - itr != ie_length) + memmove(itr, itr + ie_length, top - itr + ie_length); + top -= ie_length; + new_len -= ie_length; + } + } + uwb_rc->ies->wIELength = cpu_to_le16(new_len); + return 0; +} + + +/** + * Remove an IE currently being transmitted by device + * + * @element_id: id of IE to be removed from device's beacon + */ +int uwb_rc_ie_rm(struct uwb_rc *uwb_rc, enum uwb_ie element_id) +{ + struct device *dev = &uwb_rc->uwb_dev.dev; + int result; + + if (uwb_rc->ies == NULL) + return -ESHUTDOWN; + mutex_lock(&uwb_rc->ies_mutex); + result = uwb_rc_ie_cache_rm(uwb_rc, element_id); + if (result < 0) + dev_err(dev, "Cannot remove IE from cache.\n"); + if (uwb_rc->beaconing != -1) { + result = uwb_rc_set_ie(uwb_rc, uwb_rc->ies); + if (result < 0) + dev_err(dev, "Cannot set new IE on device.\n"); + } + mutex_unlock(&uwb_rc->ies_mutex); + return result; +} +EXPORT_SYMBOL_GPL(uwb_rc_ie_rm); diff --git a/drivers/uwb/lc-dev.c b/drivers/uwb/lc-dev.c new file mode 100644 index 000000000000..15f856c9689a --- /dev/null +++ b/drivers/uwb/lc-dev.c @@ -0,0 +1,492 @@ +/* + * Ultra Wide Band + * Life cycle of devices + * + * Copyright (C) 2005-2006 Intel Corporation + * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + * + * + * FIXME: docs + */ + +#include <linux/kernel.h> +#include <linux/device.h> +#include <linux/err.h> +#include <linux/kdev_t.h> +#include <linux/random.h> +#include "uwb-internal.h" + +#define D_LOCAL 1 +#include <linux/uwb/debug.h> + + +/* We initialize addresses to 0xff (invalid, as it is bcast) */ +static inline void uwb_dev_addr_init(struct uwb_dev_addr *addr) +{ + memset(&addr->data, 0xff, sizeof(addr->data)); +} + +static inline void uwb_mac_addr_init(struct uwb_mac_addr *addr) +{ + memset(&addr->data, 0xff, sizeof(addr->data)); +} + +/* @returns !0 if a device @addr is a broadcast address */ +static inline int uwb_dev_addr_bcast(const struct uwb_dev_addr *addr) +{ + static const struct uwb_dev_addr bcast = { .data = { 0xff, 0xff } }; + return !uwb_dev_addr_cmp(addr, &bcast); +} + +/* + * Add callback @new to be called when an event occurs in @rc. + */ +int uwb_notifs_register(struct uwb_rc *rc, struct uwb_notifs_handler *new) +{ + if (mutex_lock_interruptible(&rc->notifs_chain.mutex)) + return -ERESTARTSYS; + list_add(&new->list_node, &rc->notifs_chain.list); + mutex_unlock(&rc->notifs_chain.mutex); + return 0; +} +EXPORT_SYMBOL_GPL(uwb_notifs_register); + +/* + * Remove event handler (callback) + */ +int uwb_notifs_deregister(struct uwb_rc *rc, struct uwb_notifs_handler *entry) +{ + if (mutex_lock_interruptible(&rc->notifs_chain.mutex)) + return -ERESTARTSYS; + list_del(&entry->list_node); + mutex_unlock(&rc->notifs_chain.mutex); + return 0; +} +EXPORT_SYMBOL_GPL(uwb_notifs_deregister); + +/* + * Notify all event handlers of a given event on @rc + * + * We are called with a valid reference to the device, or NULL if the + * event is not for a particular event (e.g., a BG join event). + */ +void uwb_notify(struct uwb_rc *rc, struct uwb_dev *uwb_dev, enum uwb_notifs event) +{ + struct uwb_notifs_handler *handler; + if (mutex_lock_interruptible(&rc->notifs_chain.mutex)) + return; + if (!list_empty(&rc->notifs_chain.list)) { + list_for_each_entry(handler, &rc->notifs_chain.list, list_node) { + handler->cb(handler->data, uwb_dev, event); + } + } + mutex_unlock(&rc->notifs_chain.mutex); +} + +/* + * Release the backing device of a uwb_dev that has been dynamically allocated. + */ +static void uwb_dev_sys_release(struct device *dev) +{ + struct uwb_dev *uwb_dev = to_uwb_dev(dev); + + d_fnstart(4, NULL, "(dev %p uwb_dev %p)\n", dev, uwb_dev); + uwb_bce_put(uwb_dev->bce); + d_printf(0, &uwb_dev->dev, "uwb_dev %p freed\n", uwb_dev); + memset(uwb_dev, 0x69, sizeof(*uwb_dev)); + kfree(uwb_dev); + d_fnend(4, NULL, "(dev %p uwb_dev %p) = void\n", dev, uwb_dev); +} + +/* + * Initialize a UWB device instance + * + * Alloc, zero and call this function. + */ +void uwb_dev_init(struct uwb_dev *uwb_dev) +{ + mutex_init(&uwb_dev->mutex); + device_initialize(&uwb_dev->dev); + uwb_dev->dev.release = uwb_dev_sys_release; + uwb_dev_addr_init(&uwb_dev->dev_addr); + uwb_mac_addr_init(&uwb_dev->mac_addr); + bitmap_fill(uwb_dev->streams, UWB_NUM_GLOBAL_STREAMS); +} + +static ssize_t uwb_dev_EUI_48_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct uwb_dev *uwb_dev = to_uwb_dev(dev); + char addr[UWB_ADDR_STRSIZE]; + + uwb_mac_addr_print(addr, sizeof(addr), &uwb_dev->mac_addr); + return sprintf(buf, "%s\n", addr); +} +static DEVICE_ATTR(EUI_48, S_IRUGO, uwb_dev_EUI_48_show, NULL); + +static ssize_t uwb_dev_DevAddr_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct uwb_dev *uwb_dev = to_uwb_dev(dev); + char addr[UWB_ADDR_STRSIZE]; + + uwb_dev_addr_print(addr, sizeof(addr), &uwb_dev->dev_addr); + return sprintf(buf, "%s\n", addr); +} +static DEVICE_ATTR(DevAddr, S_IRUGO, uwb_dev_DevAddr_show, NULL); + +/* + * Show the BPST of this device. + * + * Calculated from the receive time of the device's beacon and it's + * slot number. + */ +static ssize_t uwb_dev_BPST_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct uwb_dev *uwb_dev = to_uwb_dev(dev); + struct uwb_beca_e *bce; + struct uwb_beacon_frame *bf; + u16 bpst; + + bce = uwb_dev->bce; + mutex_lock(&bce->mutex); + bf = (struct uwb_beacon_frame *)bce->be->BeaconInfo; + bpst = bce->be->wBPSTOffset + - (u16)(bf->Beacon_Slot_Number * UWB_BEACON_SLOT_LENGTH_US); + mutex_unlock(&bce->mutex); + + return sprintf(buf, "%d\n", bpst); +} +static DEVICE_ATTR(BPST, S_IRUGO, uwb_dev_BPST_show, NULL); + +/* + * Show the IEs a device is beaconing + * + * We need to access the beacon cache, so we just lock it really + * quick, print the IEs and unlock. + * + * We have a reference on the cache entry, so that should be + * quite safe. + */ +static ssize_t uwb_dev_IEs_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct uwb_dev *uwb_dev = to_uwb_dev(dev); + + return uwb_bce_print_IEs(uwb_dev, uwb_dev->bce, buf, PAGE_SIZE); +} +static DEVICE_ATTR(IEs, S_IRUGO | S_IWUSR, uwb_dev_IEs_show, NULL); + +static ssize_t uwb_dev_LQE_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct uwb_dev *uwb_dev = to_uwb_dev(dev); + struct uwb_beca_e *bce = uwb_dev->bce; + size_t result; + + mutex_lock(&bce->mutex); + result = stats_show(&uwb_dev->bce->lqe_stats, buf); + mutex_unlock(&bce->mutex); + return result; +} + +static ssize_t uwb_dev_LQE_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t size) +{ + struct uwb_dev *uwb_dev = to_uwb_dev(dev); + struct uwb_beca_e *bce = uwb_dev->bce; + ssize_t result; + + mutex_lock(&bce->mutex); + result = stats_store(&uwb_dev->bce->lqe_stats, buf, size); + mutex_unlock(&bce->mutex); + return result; +} +static DEVICE_ATTR(LQE, S_IRUGO | S_IWUSR, uwb_dev_LQE_show, uwb_dev_LQE_store); + +static ssize_t uwb_dev_RSSI_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct uwb_dev *uwb_dev = to_uwb_dev(dev); + struct uwb_beca_e *bce = uwb_dev->bce; + size_t result; + + mutex_lock(&bce->mutex); + result = stats_show(&uwb_dev->bce->rssi_stats, buf); + mutex_unlock(&bce->mutex); + return result; +} + +static ssize_t uwb_dev_RSSI_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t size) +{ + struct uwb_dev *uwb_dev = to_uwb_dev(dev); + struct uwb_beca_e *bce = uwb_dev->bce; + ssize_t result; + + mutex_lock(&bce->mutex); + result = stats_store(&uwb_dev->bce->rssi_stats, buf, size); + mutex_unlock(&bce->mutex); + return result; +} +static DEVICE_ATTR(RSSI, S_IRUGO | S_IWUSR, uwb_dev_RSSI_show, uwb_dev_RSSI_store); + + +static struct attribute *dev_attrs[] = { + &dev_attr_EUI_48.attr, + &dev_attr_DevAddr.attr, + &dev_attr_BPST.attr, + &dev_attr_IEs.attr, + &dev_attr_LQE.attr, + &dev_attr_RSSI.attr, + NULL, +}; + +static struct attribute_group dev_attr_group = { + .attrs = dev_attrs, +}; + +static struct attribute_group *groups[] = { + &dev_attr_group, + NULL, +}; + +/** + * Device SYSFS registration + * + * + */ +static int __uwb_dev_sys_add(struct uwb_dev *uwb_dev, struct device *parent_dev) +{ + int result; + struct device *dev; + + d_fnstart(4, NULL, "(uwb_dev %p parent_dev %p)\n", uwb_dev, parent_dev); + BUG_ON(parent_dev == NULL); + + dev = &uwb_dev->dev; + /* Device sysfs files are only useful for neighbor devices not + local radio controllers. */ + if (&uwb_dev->rc->uwb_dev != uwb_dev) + dev->groups = groups; + dev->parent = parent_dev; + dev_set_drvdata(dev, uwb_dev); + + result = device_add(dev); + d_fnend(4, NULL, "(uwb_dev %p parent_dev %p) = %d\n", uwb_dev, parent_dev, result); + return result; +} + + +static void __uwb_dev_sys_rm(struct uwb_dev *uwb_dev) +{ + d_fnstart(4, NULL, "(uwb_dev %p)\n", uwb_dev); + dev_set_drvdata(&uwb_dev->dev, NULL); + device_del(&uwb_dev->dev); + d_fnend(4, NULL, "(uwb_dev %p) = void\n", uwb_dev); +} + + +/** + * Register and initialize a new UWB device + * + * Did you call uwb_dev_init() on it? + * + * @parent_rc: is the parent radio controller who has the link to the + * device. When registering the UWB device that is a UWB + * Radio Controller, we point back to it. + * + * If registering the device that is part of a radio, caller has set + * rc->uwb_dev->dev. Otherwise it is to be left NULL--a new one will + * be allocated. + */ +int uwb_dev_add(struct uwb_dev *uwb_dev, struct device *parent_dev, + struct uwb_rc *parent_rc) +{ + int result; + struct device *dev; + + BUG_ON(uwb_dev == NULL); + BUG_ON(parent_dev == NULL); + BUG_ON(parent_rc == NULL); + + mutex_lock(&uwb_dev->mutex); + dev = &uwb_dev->dev; + uwb_dev->rc = parent_rc; + result = __uwb_dev_sys_add(uwb_dev, parent_dev); + if (result < 0) + printk(KERN_ERR "UWB: unable to register dev %s with sysfs: %d\n", + dev_name(dev), result); + mutex_unlock(&uwb_dev->mutex); + return result; +} + + +void uwb_dev_rm(struct uwb_dev *uwb_dev) +{ + mutex_lock(&uwb_dev->mutex); + __uwb_dev_sys_rm(uwb_dev); + mutex_unlock(&uwb_dev->mutex); +} + + +static +int __uwb_dev_try_get(struct device *dev, void *__target_uwb_dev) +{ + struct uwb_dev *target_uwb_dev = __target_uwb_dev; + struct uwb_dev *uwb_dev = to_uwb_dev(dev); + if (uwb_dev == target_uwb_dev) { + uwb_dev_get(uwb_dev); + return 1; + } else + return 0; +} + + +/** + * Given a UWB device descriptor, validate and refcount it + * + * @returns NULL if the device does not exist or is quiescing; the ptr to + * it otherwise. + */ +struct uwb_dev *uwb_dev_try_get(struct uwb_rc *rc, struct uwb_dev *uwb_dev) +{ + if (uwb_dev_for_each(rc, __uwb_dev_try_get, uwb_dev)) + return uwb_dev; + else + return NULL; +} +EXPORT_SYMBOL_GPL(uwb_dev_try_get); + + +/** + * Remove a device from the system [grunt for other functions] + */ +int __uwb_dev_offair(struct uwb_dev *uwb_dev, struct uwb_rc *rc) +{ + struct device *dev = &uwb_dev->dev; + char macbuf[UWB_ADDR_STRSIZE], devbuf[UWB_ADDR_STRSIZE]; + + d_fnstart(3, NULL, "(dev %p [uwb_dev %p], uwb_rc %p)\n", dev, uwb_dev, rc); + uwb_mac_addr_print(macbuf, sizeof(macbuf), &uwb_dev->mac_addr); + uwb_dev_addr_print(devbuf, sizeof(devbuf), &uwb_dev->dev_addr); + dev_info(dev, "uwb device (mac %s dev %s) disconnected from %s %s\n", + macbuf, devbuf, + rc ? rc->uwb_dev.dev.parent->bus->name : "n/a", + rc ? dev_name(rc->uwb_dev.dev.parent) : ""); + uwb_dev_rm(uwb_dev); + uwb_dev_put(uwb_dev); /* for the creation in _onair() */ + d_fnend(3, NULL, "(dev %p [uwb_dev %p], uwb_rc %p) = 0\n", dev, uwb_dev, rc); + return 0; +} + + +/** + * A device went off the air, clean up after it! + * + * This is called by the UWB Daemon (through the beacon purge function + * uwb_bcn_cache_purge) when it is detected that a device has been in + * radio silence for a while. + * + * If this device is actually a local radio controller we don't need + * to go through the offair process, as it is not registered as that. + * + * NOTE: uwb_bcn_cache.mutex is held! + */ +void uwbd_dev_offair(struct uwb_beca_e *bce) +{ + struct uwb_dev *uwb_dev; + + uwb_dev = bce->uwb_dev; + if (uwb_dev) { + uwb_notify(uwb_dev->rc, uwb_dev, UWB_NOTIF_OFFAIR); + __uwb_dev_offair(uwb_dev, uwb_dev->rc); + } +} + + +/** + * A device went on the air, start it up! + * + * This is called by the UWB Daemon when it is detected that a device + * has popped up in the radio range of the radio controller. + * + * It will just create the freaking device, register the beacon and + * stuff and yatla, done. + * + * + * NOTE: uwb_beca.mutex is held, bce->mutex is held + */ +void uwbd_dev_onair(struct uwb_rc *rc, struct uwb_beca_e *bce) +{ + int result; + struct device *dev = &rc->uwb_dev.dev; + struct uwb_dev *uwb_dev; + char macbuf[UWB_ADDR_STRSIZE], devbuf[UWB_ADDR_STRSIZE]; + + uwb_mac_addr_print(macbuf, sizeof(macbuf), bce->mac_addr); + uwb_dev_addr_print(devbuf, sizeof(devbuf), &bce->dev_addr); + uwb_dev = kzalloc(sizeof(struct uwb_dev), GFP_KERNEL); + if (uwb_dev == NULL) { + dev_err(dev, "new device %s: Cannot allocate memory\n", + macbuf); + return; + } + uwb_dev_init(uwb_dev); /* This sets refcnt to one, we own it */ + uwb_dev->mac_addr = *bce->mac_addr; + uwb_dev->dev_addr = bce->dev_addr; + dev_set_name(&uwb_dev->dev, macbuf); + result = uwb_dev_add(uwb_dev, &rc->uwb_dev.dev, rc); + if (result < 0) { + dev_err(dev, "new device %s: cannot instantiate device\n", + macbuf); + goto error_dev_add; + } + /* plug the beacon cache */ + bce->uwb_dev = uwb_dev; + uwb_dev->bce = bce; + uwb_bce_get(bce); /* released in uwb_dev_sys_release() */ + dev_info(dev, "uwb device (mac %s dev %s) connected to %s %s\n", + macbuf, devbuf, rc->uwb_dev.dev.parent->bus->name, + dev_name(rc->uwb_dev.dev.parent)); + uwb_notify(rc, uwb_dev, UWB_NOTIF_ONAIR); + return; + +error_dev_add: + kfree(uwb_dev); + return; +} + +/** + * Iterate over the list of UWB devices, calling a @function on each + * + * See docs for bus_for_each().... + * + * @rc: radio controller for the devices. + * @function: function to call. + * @priv: data to pass to @function. + * @returns: 0 if no invocation of function() returned a value + * different to zero. That value otherwise. + */ +int uwb_dev_for_each(struct uwb_rc *rc, uwb_dev_for_each_f function, void *priv) +{ + return device_for_each_child(&rc->uwb_dev.dev, priv, function); +} +EXPORT_SYMBOL_GPL(uwb_dev_for_each); diff --git a/drivers/uwb/lc-rc.c b/drivers/uwb/lc-rc.c new file mode 100644 index 000000000000..ee5772f00d42 --- /dev/null +++ b/drivers/uwb/lc-rc.c @@ -0,0 +1,495 @@ +/* + * Ultra Wide Band + * Life cycle of radio controllers + * + * Copyright (C) 2005-2006 Intel Corporation + * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + * + * + * FIXME: docs + * + * A UWB radio controller is also a UWB device, so it embeds one... + * + * List of RCs comes from the 'struct class uwb_rc_class'. + */ + +#include <linux/kernel.h> +#include <linux/string.h> +#include <linux/device.h> +#include <linux/err.h> +#include <linux/random.h> +#include <linux/kdev_t.h> +#include <linux/etherdevice.h> +#include <linux/usb.h> + +#define D_LOCAL 1 +#include <linux/uwb/debug.h> +#include "uwb-internal.h" + +static int uwb_rc_index_match(struct device *dev, void *data) +{ + int *index = data; + struct uwb_rc *rc = dev_get_drvdata(dev); + + if (rc->index == *index) + return 1; + return 0; +} + +static struct uwb_rc *uwb_rc_find_by_index(int index) +{ + struct device *dev; + struct uwb_rc *rc = NULL; + + dev = class_find_device(&uwb_rc_class, NULL, &index, uwb_rc_index_match); + if (dev) + rc = dev_get_drvdata(dev); + return rc; +} + +static int uwb_rc_new_index(void) +{ + int index = 0; + + for (;;) { + if (!uwb_rc_find_by_index(index)) + return index; + if (++index < 0) + index = 0; + } +} + +/** + * Release the backing device of a uwb_rc that has been dynamically allocated. + */ +static void uwb_rc_sys_release(struct device *dev) +{ + struct uwb_dev *uwb_dev = container_of(dev, struct uwb_dev, dev); + struct uwb_rc *rc = container_of(uwb_dev, struct uwb_rc, uwb_dev); + + uwb_rc_neh_destroy(rc); + uwb_rc_ie_release(rc); + d_printf(1, dev, "freed uwb_rc %p\n", rc); + kfree(rc); +} + + +void uwb_rc_init(struct uwb_rc *rc) +{ + struct uwb_dev *uwb_dev = &rc->uwb_dev; + + uwb_dev_init(uwb_dev); + rc->uwb_dev.dev.class = &uwb_rc_class; + rc->uwb_dev.dev.release = uwb_rc_sys_release; + uwb_rc_neh_create(rc); + rc->beaconing = -1; + rc->scan_type = UWB_SCAN_DISABLED; + INIT_LIST_HEAD(&rc->notifs_chain.list); + mutex_init(&rc->notifs_chain.mutex); + uwb_drp_avail_init(rc); + uwb_rc_ie_init(rc); + uwb_rsv_init(rc); + uwb_rc_pal_init(rc); +} +EXPORT_SYMBOL_GPL(uwb_rc_init); + + +struct uwb_rc *uwb_rc_alloc(void) +{ + struct uwb_rc *rc; + rc = kzalloc(sizeof(*rc), GFP_KERNEL); + if (rc == NULL) + return NULL; + uwb_rc_init(rc); + return rc; +} +EXPORT_SYMBOL_GPL(uwb_rc_alloc); + +static struct attribute *rc_attrs[] = { + &dev_attr_mac_address.attr, + &dev_attr_scan.attr, + &dev_attr_beacon.attr, + NULL, +}; + +static struct attribute_group rc_attr_group = { + .attrs = rc_attrs, +}; + +/* + * Registration of sysfs specific stuff + */ +static int uwb_rc_sys_add(struct uwb_rc *rc) +{ + return sysfs_create_group(&rc->uwb_dev.dev.kobj, &rc_attr_group); +} + + +static void __uwb_rc_sys_rm(struct uwb_rc *rc) +{ + sysfs_remove_group(&rc->uwb_dev.dev.kobj, &rc_attr_group); +} + +/** + * uwb_rc_mac_addr_setup - get an RC's EUI-48 address or set it + * @rc: the radio controller. + * + * If the EUI-48 address is 00:00:00:00:00:00 or FF:FF:FF:FF:FF:FF + * then a random locally administered EUI-48 is generated and set on + * the device. The probability of address collisions is sufficiently + * unlikely (1/2^40 = 9.1e-13) that they're not checked for. + */ +static +int uwb_rc_mac_addr_setup(struct uwb_rc *rc) +{ + int result; + struct device *dev = &rc->uwb_dev.dev; + struct uwb_dev *uwb_dev = &rc->uwb_dev; + char devname[UWB_ADDR_STRSIZE]; + struct uwb_mac_addr addr; + + result = uwb_rc_mac_addr_get(rc, &addr); + if (result < 0) { + dev_err(dev, "cannot retrieve UWB EUI-48 address: %d\n", result); + return result; + } + + if (uwb_mac_addr_unset(&addr) || uwb_mac_addr_bcast(&addr)) { + addr.data[0] = 0x02; /* locally adminstered and unicast */ + get_random_bytes(&addr.data[1], sizeof(addr.data)-1); + + result = uwb_rc_mac_addr_set(rc, &addr); + if (result < 0) { + uwb_mac_addr_print(devname, sizeof(devname), &addr); + dev_err(dev, "cannot set EUI-48 address %s: %d\n", + devname, result); + return result; + } + } + uwb_dev->mac_addr = addr; + return 0; +} + + + +static int uwb_rc_setup(struct uwb_rc *rc) +{ + int result; + struct device *dev = &rc->uwb_dev.dev; + + result = uwb_rc_reset(rc); + if (result < 0) { + dev_err(dev, "cannot reset UWB radio: %d\n", result); + goto error; + } + result = uwb_rc_mac_addr_setup(rc); + if (result < 0) { + dev_err(dev, "cannot setup UWB MAC address: %d\n", result); + goto error; + } + result = uwb_rc_dev_addr_assign(rc); + if (result < 0) { + dev_err(dev, "cannot assign UWB DevAddr: %d\n", result); + goto error; + } + result = uwb_rc_ie_setup(rc); + if (result < 0) { + dev_err(dev, "cannot setup IE subsystem: %d\n", result); + goto error_ie_setup; + } + result = uwb_rsv_setup(rc); + if (result < 0) { + dev_err(dev, "cannot setup reservation subsystem: %d\n", result); + goto error_rsv_setup; + } + uwb_dbg_add_rc(rc); + return 0; + +error_rsv_setup: + uwb_rc_ie_release(rc); +error_ie_setup: +error: + return result; +} + + +/** + * Register a new UWB radio controller + * + * Did you call uwb_rc_init() on your rc? + * + * We assume that this is being called with a > 0 refcount on + * it [through ops->{get|put}_device(). We'll take our own, though. + * + * @parent_dev is our real device, the one that provides the actual UWB device + */ +int uwb_rc_add(struct uwb_rc *rc, struct device *parent_dev, void *priv) +{ + int result; + struct device *dev; + char macbuf[UWB_ADDR_STRSIZE], devbuf[UWB_ADDR_STRSIZE]; + + rc->index = uwb_rc_new_index(); + + dev = &rc->uwb_dev.dev; + dev_set_name(dev, "uwb%d", rc->index); + + rc->priv = priv; + + result = rc->start(rc); + if (result < 0) + goto error_rc_start; + + result = uwb_rc_setup(rc); + if (result < 0) { + dev_err(dev, "cannot setup UWB radio controller: %d\n", result); + goto error_rc_setup; + } + + result = uwb_dev_add(&rc->uwb_dev, parent_dev, rc); + if (result < 0 && result != -EADDRNOTAVAIL) + goto error_dev_add; + + result = uwb_rc_sys_add(rc); + if (result < 0) { + dev_err(parent_dev, "cannot register UWB radio controller " + "dev attributes: %d\n", result); + goto error_sys_add; + } + + uwb_mac_addr_print(macbuf, sizeof(macbuf), &rc->uwb_dev.mac_addr); + uwb_dev_addr_print(devbuf, sizeof(devbuf), &rc->uwb_dev.dev_addr); + dev_info(dev, + "new uwb radio controller (mac %s dev %s) on %s %s\n", + macbuf, devbuf, parent_dev->bus->name, dev_name(parent_dev)); + rc->ready = 1; + return 0; + +error_sys_add: + uwb_dev_rm(&rc->uwb_dev); +error_dev_add: +error_rc_setup: + rc->stop(rc); + uwbd_flush(rc); +error_rc_start: + return result; +} +EXPORT_SYMBOL_GPL(uwb_rc_add); + + +static int uwb_dev_offair_helper(struct device *dev, void *priv) +{ + struct uwb_dev *uwb_dev = to_uwb_dev(dev); + + return __uwb_dev_offair(uwb_dev, uwb_dev->rc); +} + +/* + * Remove a Radio Controller; stop beaconing/scanning, disconnect all children + */ +void uwb_rc_rm(struct uwb_rc *rc) +{ + rc->ready = 0; + + uwb_dbg_del_rc(rc); + uwb_rsv_cleanup(rc); + uwb_rc_ie_rm(rc, UWB_IDENTIFICATION_IE); + if (rc->beaconing >= 0) + uwb_rc_beacon(rc, -1, 0); + if (rc->scan_type != UWB_SCAN_DISABLED) + uwb_rc_scan(rc, rc->scanning, UWB_SCAN_DISABLED, 0); + uwb_rc_reset(rc); + + rc->stop(rc); + uwbd_flush(rc); + + uwb_dev_lock(&rc->uwb_dev); + rc->priv = NULL; + rc->cmd = NULL; + uwb_dev_unlock(&rc->uwb_dev); + mutex_lock(&uwb_beca.mutex); + uwb_dev_for_each(rc, uwb_dev_offair_helper, NULL); + __uwb_rc_sys_rm(rc); + mutex_unlock(&uwb_beca.mutex); + uwb_dev_rm(&rc->uwb_dev); +} +EXPORT_SYMBOL_GPL(uwb_rc_rm); + +static int find_rc_try_get(struct device *dev, void *data) +{ + struct uwb_rc *target_rc = data; + struct uwb_rc *rc = dev_get_drvdata(dev); + + if (rc == NULL) { + WARN_ON(1); + return 0; + } + if (rc == target_rc) { + if (rc->ready == 0) + return 0; + else + return 1; + } + return 0; +} + +/** + * Given a radio controller descriptor, validate and refcount it + * + * @returns NULL if the rc does not exist or is quiescing; the ptr to + * it otherwise. + */ +struct uwb_rc *__uwb_rc_try_get(struct uwb_rc *target_rc) +{ + struct device *dev; + struct uwb_rc *rc = NULL; + + dev = class_find_device(&uwb_rc_class, NULL, target_rc, + find_rc_try_get); + if (dev) { + rc = dev_get_drvdata(dev); + __uwb_rc_get(rc); + } + return rc; +} +EXPORT_SYMBOL_GPL(__uwb_rc_try_get); + +/* + * RC get for external refcount acquirers... + * + * Increments the refcount of the device and it's backend modules + */ +static inline struct uwb_rc *uwb_rc_get(struct uwb_rc *rc) +{ + if (rc->ready == 0) + return NULL; + uwb_dev_get(&rc->uwb_dev); + return rc; +} + +static int find_rc_grandpa(struct device *dev, void *data) +{ + struct device *grandpa_dev = data; + struct uwb_rc *rc = dev_get_drvdata(dev); + + if (rc->uwb_dev.dev.parent->parent == grandpa_dev) { + rc = uwb_rc_get(rc); + return 1; + } + return 0; +} + +/** + * Locate and refcount a radio controller given a common grand-parent + * + * @grandpa_dev Pointer to the 'grandparent' device structure. + * @returns NULL If the rc does not exist or is quiescing; the ptr to + * it otherwise, properly referenced. + * + * The Radio Control interface (or the UWB Radio Controller) is always + * an interface of a device. The parent is the interface, the + * grandparent is the device that encapsulates the interface. + * + * There is no need to lock around as the "grandpa" would be + * refcounted by the target, and to remove the referemes, the + * uwb_rc_class->sem would have to be taken--we hold it, ergo we + * should be safe. + */ +struct uwb_rc *uwb_rc_get_by_grandpa(const struct device *grandpa_dev) +{ + struct device *dev; + struct uwb_rc *rc = NULL; + + dev = class_find_device(&uwb_rc_class, NULL, (void *)grandpa_dev, + find_rc_grandpa); + if (dev) + rc = dev_get_drvdata(dev); + return rc; +} +EXPORT_SYMBOL_GPL(uwb_rc_get_by_grandpa); + +/** + * Find a radio controller by device address + * + * @returns the pointer to the radio controller, properly referenced + */ +static int find_rc_dev(struct device *dev, void *data) +{ + struct uwb_dev_addr *addr = data; + struct uwb_rc *rc = dev_get_drvdata(dev); + + if (rc == NULL) { + WARN_ON(1); + return 0; + } + if (!uwb_dev_addr_cmp(&rc->uwb_dev.dev_addr, addr)) { + rc = uwb_rc_get(rc); + return 1; + } + return 0; +} + +struct uwb_rc *uwb_rc_get_by_dev(const struct uwb_dev_addr *addr) +{ + struct device *dev; + struct uwb_rc *rc = NULL; + + dev = class_find_device(&uwb_rc_class, NULL, (void *)addr, + find_rc_dev); + if (dev) + rc = dev_get_drvdata(dev); + + return rc; +} +EXPORT_SYMBOL_GPL(uwb_rc_get_by_dev); + +/** + * Drop a reference on a radio controller + * + * This is the version that should be done by entities external to the + * UWB Radio Control stack (ie: clients of the API). + */ +void uwb_rc_put(struct uwb_rc *rc) +{ + __uwb_rc_put(rc); +} +EXPORT_SYMBOL_GPL(uwb_rc_put); + +/* + * + * + */ +ssize_t uwb_rc_print_IEs(struct uwb_rc *uwb_rc, char *buf, size_t size) +{ + ssize_t result; + struct uwb_rc_evt_get_ie *ie_info; + struct uwb_buf_ctx ctx; + + result = uwb_rc_get_ie(uwb_rc, &ie_info); + if (result < 0) + goto error_get_ie; + ctx.buf = buf; + ctx.size = size; + ctx.bytes = 0; + uwb_ie_for_each(&uwb_rc->uwb_dev, uwb_ie_dump_hex, &ctx, + ie_info->IEData, result - sizeof(*ie_info)); + result = ctx.bytes; + kfree(ie_info); +error_get_ie: + return result; +} + diff --git a/drivers/uwb/neh.c b/drivers/uwb/neh.c new file mode 100644 index 000000000000..9b4eb64327ac --- /dev/null +++ b/drivers/uwb/neh.c @@ -0,0 +1,616 @@ +/* + * WUSB Wire Adapter: Radio Control Interface (WUSB[8]) + * Notification and Event Handling + * + * Copyright (C) 2005-2006 Intel Corporation + * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + * + * + * The RC interface of the Host Wire Adapter (USB dongle) or WHCI PCI + * card delivers a stream of notifications and events to the + * notification end event endpoint or area. This code takes care of + * getting a buffer with that data, breaking it up in separate + * notifications and events and then deliver those. + * + * Events are answers to commands and they carry a context ID that + * associates them to the command. Notifications are that, + * notifications, they come out of the blue and have a context ID of + * zero. Think of the context ID kind of like a handler. The + * uwb_rc_neh_* code deals with managing context IDs. + * + * This is why you require a handle to operate on a UWB host. When you + * open a handle a context ID is assigned to you. + * + * So, as it is done is: + * + * 1. Add an event handler [uwb_rc_neh_add()] (assigns a ctx id) + * 2. Issue command [rc->cmd(rc, ...)] + * 3. Arm the timeout timer [uwb_rc_neh_arm()] + * 4, Release the reference to the neh [uwb_rc_neh_put()] + * 5. Wait for the callback + * 6. Command result (RCEB) is passed to the callback + * + * If (2) fails, you should remove the handle [uwb_rc_neh_rm()] + * instead of arming the timer. + * + * Handles are for using in *serialized* code, single thread. + * + * When the notification/event comes, the IRQ handler/endpoint + * callback passes the data read to uwb_rc_neh_grok() which will break + * it up in a discrete series of events, look up who is listening for + * them and execute the pertinent callbacks. + * + * If the reader detects an error while reading the data stream, call + * uwb_rc_neh_error(). + * + * CONSTRAINTS/ASSUMPTIONS: + * + * - Most notifications/events are small (less thank .5k), copying + * around is ok. + * + * - Notifications/events are ALWAYS smaller than PAGE_SIZE + * + * - Notifications/events always come in a single piece (ie: a buffer + * will always contain entire notifications/events). + * + * - we cannot know in advance how long each event is (because they + * lack a length field in their header--smart move by the standards + * body, btw). So we need a facility to get the event size given the + * header. This is what the EST code does (notif/Event Size + * Tables), check nest.c--as well, you can associate the size to + * the handle [w/ neh->extra_size()]. + * + * - Most notifications/events are fixed size; only a few are variable + * size (NEST takes care of that). + * + * - Listeners of events expect them, so they usually provide a + * buffer, as they know the size. Listeners to notifications don't, + * so we allocate their buffers dynamically. + */ +#include <linux/kernel.h> +#include <linux/timer.h> +#include <linux/err.h> + +#include "uwb-internal.h" +#define D_LOCAL 0 +#include <linux/uwb/debug.h> + +/* + * UWB Radio Controller Notification/Event Handle + * + * Represents an entity waiting for an event coming from the UWB Radio + * Controller with a given context id (context) and type (evt_type and + * evt). On reception of the notification/event, the callback (cb) is + * called with the event. + * + * If the timer expires before the event is received, the callback is + * called with -ETIMEDOUT as the event size. + */ +struct uwb_rc_neh { + struct kref kref; + + struct uwb_rc *rc; + u8 evt_type; + __le16 evt; + u8 context; + uwb_rc_cmd_cb_f cb; + void *arg; + + struct timer_list timer; + struct list_head list_node; +}; + +static void uwb_rc_neh_timer(unsigned long arg); + +static void uwb_rc_neh_release(struct kref *kref) +{ + struct uwb_rc_neh *neh = container_of(kref, struct uwb_rc_neh, kref); + + kfree(neh); +} + +static void uwb_rc_neh_get(struct uwb_rc_neh *neh) +{ + kref_get(&neh->kref); +} + +/** + * uwb_rc_neh_put - release reference to a neh + * @neh: the neh + */ +void uwb_rc_neh_put(struct uwb_rc_neh *neh) +{ + kref_put(&neh->kref, uwb_rc_neh_release); +} + + +/** + * Assigns @neh a context id from @rc's pool + * + * @rc: UWB Radio Controller descriptor; @rc->neh_lock taken + * @neh: Notification/Event Handle + * @returns 0 if context id was assigned ok; < 0 errno on error (if + * all the context IDs are taken). + * + * (assumes @wa is locked). + * + * NOTE: WUSB spec reserves context ids 0x00 for notifications and + * 0xff is invalid, so they must not be used. Initialization + * fills up those two in the bitmap so they are not allocated. + * + * We spread the allocation around to reduce the posiblity of two + * consecutive opened @neh's getting the same context ID assigned (to + * avoid surprises with late events that timed out long time ago). So + * first we search from where @rc->ctx_roll is, if not found, we + * search from zero. + */ +static +int __uwb_rc_ctx_get(struct uwb_rc *rc, struct uwb_rc_neh *neh) +{ + int result; + result = find_next_zero_bit(rc->ctx_bm, UWB_RC_CTX_MAX, + rc->ctx_roll++); + if (result < UWB_RC_CTX_MAX) + goto found; + result = find_first_zero_bit(rc->ctx_bm, UWB_RC_CTX_MAX); + if (result < UWB_RC_CTX_MAX) + goto found; + return -ENFILE; +found: + set_bit(result, rc->ctx_bm); + neh->context = result; + return 0; +} + + +/** Releases @neh's context ID back to @rc (@rc->neh_lock is locked). */ +static +void __uwb_rc_ctx_put(struct uwb_rc *rc, struct uwb_rc_neh *neh) +{ + struct device *dev = &rc->uwb_dev.dev; + if (neh->context == 0) + return; + if (test_bit(neh->context, rc->ctx_bm) == 0) { + dev_err(dev, "context %u not set in bitmap\n", + neh->context); + WARN_ON(1); + } + clear_bit(neh->context, rc->ctx_bm); + neh->context = 0; +} + +/** + * uwb_rc_neh_add - add a neh for a radio controller command + * @rc: the radio controller + * @cmd: the radio controller command + * @expected_type: the type of the expected response event + * @expected_event: the expected event ID + * @cb: callback for when the event is received + * @arg: argument for the callback + * + * Creates a neh and adds it to the list of those waiting for an + * event. A context ID will be assigned to the command. + */ +struct uwb_rc_neh *uwb_rc_neh_add(struct uwb_rc *rc, struct uwb_rccb *cmd, + u8 expected_type, u16 expected_event, + uwb_rc_cmd_cb_f cb, void *arg) +{ + int result; + unsigned long flags; + struct device *dev = &rc->uwb_dev.dev; + struct uwb_rc_neh *neh; + + neh = kzalloc(sizeof(*neh), GFP_KERNEL); + if (neh == NULL) { + result = -ENOMEM; + goto error_kzalloc; + } + + kref_init(&neh->kref); + INIT_LIST_HEAD(&neh->list_node); + init_timer(&neh->timer); + neh->timer.function = uwb_rc_neh_timer; + neh->timer.data = (unsigned long)neh; + + neh->rc = rc; + neh->evt_type = expected_type; + neh->evt = cpu_to_le16(expected_event); + neh->cb = cb; + neh->arg = arg; + + spin_lock_irqsave(&rc->neh_lock, flags); + result = __uwb_rc_ctx_get(rc, neh); + if (result >= 0) { + cmd->bCommandContext = neh->context; + list_add_tail(&neh->list_node, &rc->neh_list); + uwb_rc_neh_get(neh); + } + spin_unlock_irqrestore(&rc->neh_lock, flags); + if (result < 0) + goto error_ctx_get; + + return neh; + +error_ctx_get: + kfree(neh); +error_kzalloc: + dev_err(dev, "cannot open handle to radio controller: %d\n", result); + return ERR_PTR(result); +} + +static void __uwb_rc_neh_rm(struct uwb_rc *rc, struct uwb_rc_neh *neh) +{ + del_timer(&neh->timer); + __uwb_rc_ctx_put(rc, neh); + list_del(&neh->list_node); +} + +/** + * uwb_rc_neh_rm - remove a neh. + * @rc: the radio controller + * @neh: the neh to remove + * + * Remove an active neh immediately instead of waiting for the event + * (or a time out). + */ +void uwb_rc_neh_rm(struct uwb_rc *rc, struct uwb_rc_neh *neh) +{ + unsigned long flags; + + spin_lock_irqsave(&rc->neh_lock, flags); + __uwb_rc_neh_rm(rc, neh); + spin_unlock_irqrestore(&rc->neh_lock, flags); + + uwb_rc_neh_put(neh); +} + +/** + * uwb_rc_neh_arm - arm an event handler timeout timer + * + * @rc: UWB Radio Controller + * @neh: Notification/event handler for @rc + * + * The timer is only armed if the neh is active. + */ +void uwb_rc_neh_arm(struct uwb_rc *rc, struct uwb_rc_neh *neh) +{ + unsigned long flags; + + spin_lock_irqsave(&rc->neh_lock, flags); + if (neh->context) + mod_timer(&neh->timer, + jiffies + msecs_to_jiffies(UWB_RC_CMD_TIMEOUT_MS)); + spin_unlock_irqrestore(&rc->neh_lock, flags); +} + +static void uwb_rc_neh_cb(struct uwb_rc_neh *neh, struct uwb_rceb *rceb, size_t size) +{ + (*neh->cb)(neh->rc, neh->arg, rceb, size); + uwb_rc_neh_put(neh); +} + +static bool uwb_rc_neh_match(struct uwb_rc_neh *neh, const struct uwb_rceb *rceb) +{ + return neh->evt_type == rceb->bEventType + && neh->evt == rceb->wEvent + && neh->context == rceb->bEventContext; +} + +/** + * Find the handle waiting for a RC Radio Control Event + * + * @rc: UWB Radio Controller + * @rceb: Pointer to the RCEB buffer + * @event_size: Pointer to the size of the RCEB buffer. Might be + * adjusted to take into account the @neh->extra_size + * settings. + * + * If the listener has no buffer (NULL buffer), one is allocated for + * the right size (the amount of data received). @neh->ptr will point + * to the event payload, which always starts with a 'struct + * uwb_rceb'. kfree() it when done. + */ +static +struct uwb_rc_neh *uwb_rc_neh_lookup(struct uwb_rc *rc, + const struct uwb_rceb *rceb) +{ + struct uwb_rc_neh *neh = NULL, *h; + unsigned long flags; + + spin_lock_irqsave(&rc->neh_lock, flags); + + list_for_each_entry(h, &rc->neh_list, list_node) { + if (uwb_rc_neh_match(h, rceb)) { + neh = h; + break; + } + } + + if (neh) + __uwb_rc_neh_rm(rc, neh); + + spin_unlock_irqrestore(&rc->neh_lock, flags); + + return neh; +} + + +/** + * Process notifications coming from the radio control interface + * + * @rc: UWB Radio Control Interface descriptor + * @neh: Notification/Event Handler @neh->ptr points to + * @uwb_evt->buffer. + * + * This function is called by the event/notif handling subsystem when + * notifications arrive (hwarc_probe() arms a notification/event handle + * that calls back this function for every received notification; this + * function then will rearm itself). + * + * Notification data buffers are dynamically allocated by the NEH + * handling code in neh.c [uwb_rc_neh_lookup()]. What is actually + * allocated is space to contain the notification data. + * + * Buffers are prefixed with a Radio Control Event Block (RCEB) as + * defined by the WUSB Wired-Adapter Radio Control interface. We + * just use it for the notification code. + * + * On each case statement we just transcode endianess of the different + * fields. We declare a pointer to a RCI definition of an event, and + * then to a UWB definition of the same event (which are the same, + * remember). Event if we use different pointers + */ +static +void uwb_rc_notif(struct uwb_rc *rc, struct uwb_rceb *rceb, ssize_t size) +{ + struct device *dev = &rc->uwb_dev.dev; + struct uwb_event *uwb_evt; + + if (size == -ESHUTDOWN) + return; + if (size < 0) { + dev_err(dev, "ignoring event with error code %zu\n", + size); + return; + } + + uwb_evt = kzalloc(sizeof(*uwb_evt), GFP_ATOMIC); + if (unlikely(uwb_evt == NULL)) { + dev_err(dev, "no memory to queue event 0x%02x/%04x/%02x\n", + rceb->bEventType, le16_to_cpu(rceb->wEvent), + rceb->bEventContext); + return; + } + uwb_evt->rc = __uwb_rc_get(rc); /* will be put by uwbd's uwbd_event_handle() */ + uwb_evt->ts_jiffies = jiffies; + uwb_evt->type = UWB_EVT_TYPE_NOTIF; + uwb_evt->notif.size = size; + uwb_evt->notif.rceb = rceb; + + switch (le16_to_cpu(rceb->wEvent)) { + /* Trap some vendor specific events + * + * FIXME: move this to handling in ptc-est, where we + * register a NULL event handler for these two guys + * using the Intel IDs. + */ + case 0x0103: + dev_info(dev, "FIXME: DEVICE ADD\n"); + return; + case 0x0104: + dev_info(dev, "FIXME: DEVICE RM\n"); + return; + default: + break; + } + + uwbd_event_queue(uwb_evt); +} + +static void uwb_rc_neh_grok_event(struct uwb_rc *rc, struct uwb_rceb *rceb, size_t size) +{ + struct device *dev = &rc->uwb_dev.dev; + struct uwb_rc_neh *neh; + struct uwb_rceb *notif; + + if (rceb->bEventContext == 0) { + notif = kmalloc(size, GFP_ATOMIC); + if (notif) { + memcpy(notif, rceb, size); + uwb_rc_notif(rc, notif, size); + } else + dev_err(dev, "event 0x%02x/%04x/%02x (%zu bytes): no memory\n", + rceb->bEventType, le16_to_cpu(rceb->wEvent), + rceb->bEventContext, size); + } else { + neh = uwb_rc_neh_lookup(rc, rceb); + if (neh) + uwb_rc_neh_cb(neh, rceb, size); + else + dev_warn(dev, "event 0x%02x/%04x/%02x (%zu bytes): nobody cared\n", + rceb->bEventType, le16_to_cpu(rceb->wEvent), + rceb->bEventContext, size); + } +} + +/** + * Given a buffer with one or more UWB RC events/notifications, break + * them up and dispatch them. + * + * @rc: UWB Radio Controller + * @buf: Buffer with the stream of notifications/events + * @buf_size: Amount of data in the buffer + * + * Note each notification/event starts always with a 'struct + * uwb_rceb', so the minimum size if 4 bytes. + * + * The device may pass us events formatted differently than expected. + * These are first filtered, potentially creating a new event in a new + * memory location. If a new event is created by the filter it is also + * freed here. + * + * For each notif/event, tries to guess the size looking at the EST + * tables, then looks for a neh that is waiting for that event and if + * found, copies the payload to the neh's buffer and calls it back. If + * not, the data is ignored. + * + * Note that if we can't find a size description in the EST tables, we + * still might find a size in the 'neh' handle in uwb_rc_neh_lookup(). + * + * Assumptions: + * + * @rc->neh_lock is NOT taken + * + * We keep track of various sizes here: + * size: contains the size of the buffer that is processed for the + * incoming event. this buffer may contain events that are not + * formatted as WHCI. + * real_size: the actual space taken by this event in the buffer. + * We need to keep track of the real size of an event to be able to + * advance the buffer correctly. + * event_size: the size of the event as expected by the core layer + * [OR] the size of the event after filtering. if the filtering + * created a new event in a new memory location then this is + * effectively the size of a new event buffer + */ +void uwb_rc_neh_grok(struct uwb_rc *rc, void *buf, size_t buf_size) +{ + struct device *dev = &rc->uwb_dev.dev; + void *itr; + struct uwb_rceb *rceb; + size_t size, real_size, event_size; + int needtofree; + + d_fnstart(3, dev, "(rc %p buf %p %zu buf_size)\n", rc, buf, buf_size); + d_printf(2, dev, "groking event block: %zu bytes\n", buf_size); + itr = buf; + size = buf_size; + while (size > 0) { + if (size < sizeof(*rceb)) { + dev_err(dev, "not enough data in event buffer to " + "process incoming events (%zu left, minimum is " + "%zu)\n", size, sizeof(*rceb)); + break; + } + + rceb = itr; + if (rc->filter_event) { + needtofree = rc->filter_event(rc, &rceb, size, + &real_size, &event_size); + if (needtofree < 0 && needtofree != -ENOANO) { + dev_err(dev, "BUG: Unable to filter event " + "(0x%02x/%04x/%02x) from " + "device. \n", rceb->bEventType, + le16_to_cpu(rceb->wEvent), + rceb->bEventContext); + break; + } + } else + needtofree = -ENOANO; + /* do real processing if there was no filtering or the + * filtering didn't act */ + if (needtofree == -ENOANO) { + ssize_t ret = uwb_est_find_size(rc, rceb, size); + if (ret < 0) + break; + if (ret > size) { + dev_err(dev, "BUG: hw sent incomplete event " + "0x%02x/%04x/%02x (%zd bytes), only got " + "%zu bytes. We don't handle that.\n", + rceb->bEventType, le16_to_cpu(rceb->wEvent), + rceb->bEventContext, ret, size); + break; + } + real_size = event_size = ret; + } + uwb_rc_neh_grok_event(rc, rceb, event_size); + + if (needtofree == 1) + kfree(rceb); + + itr += real_size; + size -= real_size; + d_printf(2, dev, "consumed %zd bytes, %zu left\n", + event_size, size); + } + d_fnend(3, dev, "(rc %p buf %p %zu buf_size) = void\n", rc, buf, buf_size); +} +EXPORT_SYMBOL_GPL(uwb_rc_neh_grok); + + +/** + * The entity that reads from the device notification/event channel has + * detected an error. + * + * @rc: UWB Radio Controller + * @error: Errno error code + * + */ +void uwb_rc_neh_error(struct uwb_rc *rc, int error) +{ + struct uwb_rc_neh *neh, *next; + unsigned long flags; + + BUG_ON(error >= 0); + spin_lock_irqsave(&rc->neh_lock, flags); + list_for_each_entry_safe(neh, next, &rc->neh_list, list_node) { + __uwb_rc_neh_rm(rc, neh); + uwb_rc_neh_cb(neh, NULL, error); + } + spin_unlock_irqrestore(&rc->neh_lock, flags); +} +EXPORT_SYMBOL_GPL(uwb_rc_neh_error); + + +static void uwb_rc_neh_timer(unsigned long arg) +{ + struct uwb_rc_neh *neh = (struct uwb_rc_neh *)arg; + struct uwb_rc *rc = neh->rc; + unsigned long flags; + + spin_lock_irqsave(&rc->neh_lock, flags); + __uwb_rc_neh_rm(rc, neh); + spin_unlock_irqrestore(&rc->neh_lock, flags); + + uwb_rc_neh_cb(neh, NULL, -ETIMEDOUT); +} + +/** Initializes the @rc's neh subsystem + */ +void uwb_rc_neh_create(struct uwb_rc *rc) +{ + spin_lock_init(&rc->neh_lock); + INIT_LIST_HEAD(&rc->neh_list); + set_bit(0, rc->ctx_bm); /* 0 is reserved (see [WUSB] table 8-65) */ + set_bit(0xff, rc->ctx_bm); /* and 0xff is invalid */ + rc->ctx_roll = 1; +} + + +/** Release's the @rc's neh subsystem */ +void uwb_rc_neh_destroy(struct uwb_rc *rc) +{ + unsigned long flags; + struct uwb_rc_neh *neh, *next; + + spin_lock_irqsave(&rc->neh_lock, flags); + list_for_each_entry_safe(neh, next, &rc->neh_list, list_node) { + __uwb_rc_neh_rm(rc, neh); + uwb_rc_neh_put(neh); + } + spin_unlock_irqrestore(&rc->neh_lock, flags); +} diff --git a/drivers/uwb/pal.c b/drivers/uwb/pal.c new file mode 100644 index 000000000000..1afb38eacb9a --- /dev/null +++ b/drivers/uwb/pal.c @@ -0,0 +1,91 @@ +/* + * UWB PAL support. + * + * Copyright (C) 2008 Cambridge Silicon Radio Ltd. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include <linux/kernel.h> +#include <linux/uwb.h> + +#include "uwb-internal.h" + +/** + * uwb_pal_init - initialize a UWB PAL + * @pal: the PAL to initialize + */ +void uwb_pal_init(struct uwb_pal *pal) +{ + INIT_LIST_HEAD(&pal->node); +} +EXPORT_SYMBOL_GPL(uwb_pal_init); + +/** + * uwb_pal_register - register a UWB PAL + * @rc: the radio controller the PAL will be using + * @pal: the PAL + * + * The PAL must be initialized with uwb_pal_init(). + */ +int uwb_pal_register(struct uwb_rc *rc, struct uwb_pal *pal) +{ + int ret; + + if (pal->device) { + ret = sysfs_create_link(&pal->device->kobj, + &rc->uwb_dev.dev.kobj, "uwb_rc"); + if (ret < 0) + return ret; + ret = sysfs_create_link(&rc->uwb_dev.dev.kobj, + &pal->device->kobj, pal->name); + if (ret < 0) { + sysfs_remove_link(&pal->device->kobj, "uwb_rc"); + return ret; + } + } + + spin_lock(&rc->pal_lock); + list_add(&pal->node, &rc->pals); + spin_unlock(&rc->pal_lock); + + return 0; +} +EXPORT_SYMBOL_GPL(uwb_pal_register); + +/** + * uwb_pal_register - unregister a UWB PAL + * @rc: the radio controller the PAL was using + * @pal: the PAL + */ +void uwb_pal_unregister(struct uwb_rc *rc, struct uwb_pal *pal) +{ + spin_lock(&rc->pal_lock); + list_del(&pal->node); + spin_unlock(&rc->pal_lock); + + if (pal->device) { + sysfs_remove_link(&rc->uwb_dev.dev.kobj, pal->name); + sysfs_remove_link(&pal->device->kobj, "uwb_rc"); + } +} +EXPORT_SYMBOL_GPL(uwb_pal_unregister); + +/** + * uwb_rc_pal_init - initialize the PAL related parts of a radio controller + * @rc: the radio controller + */ +void uwb_rc_pal_init(struct uwb_rc *rc) +{ + spin_lock_init(&rc->pal_lock); + INIT_LIST_HEAD(&rc->pals); +} diff --git a/drivers/uwb/reset.c b/drivers/uwb/reset.c new file mode 100644 index 000000000000..8de856fa7958 --- /dev/null +++ b/drivers/uwb/reset.c @@ -0,0 +1,362 @@ +/* + * Ultra Wide Band + * UWB basic command support and radio reset + * + * Copyright (C) 2005-2006 Intel Corporation + * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + * + * + * FIXME: + * + * - docs + * + * - Now we are serializing (using the uwb_dev->mutex) the command + * execution; it should be parallelized as much as possible some + * day. + */ +#include <linux/kernel.h> +#include <linux/err.h> + +#include "uwb-internal.h" +#define D_LOCAL 0 +#include <linux/uwb/debug.h> + +/** + * Command result codes (WUSB1.0[T8-69]) + */ +static +const char *__strerror[] = { + "success", + "failure", + "hardware failure", + "no more slots", + "beacon is too large", + "invalid parameter", + "unsupported power level", + "time out (wa) or invalid ie data (whci)", + "beacon size exceeded", + "cancelled", + "invalid state", + "invalid size", + "ack not recieved", + "no more asie notification", +}; + + +/** Return a string matching the given error code */ +const char *uwb_rc_strerror(unsigned code) +{ + if (code == 255) + return "time out"; + if (code >= ARRAY_SIZE(__strerror)) + return "unknown error"; + return __strerror[code]; +} + +int uwb_rc_cmd_async(struct uwb_rc *rc, const char *cmd_name, + struct uwb_rccb *cmd, size_t cmd_size, + u8 expected_type, u16 expected_event, + uwb_rc_cmd_cb_f cb, void *arg) +{ + struct device *dev = &rc->uwb_dev.dev; + struct uwb_rc_neh *neh; + int needtofree = 0; + int result; + + uwb_dev_lock(&rc->uwb_dev); /* Protect against rc->priv being removed */ + if (rc->priv == NULL) { + uwb_dev_unlock(&rc->uwb_dev); + return -ESHUTDOWN; + } + + if (rc->filter_cmd) { + needtofree = rc->filter_cmd(rc, &cmd, &cmd_size); + if (needtofree < 0 && needtofree != -ENOANO) { + dev_err(dev, "%s: filter error: %d\n", + cmd_name, needtofree); + uwb_dev_unlock(&rc->uwb_dev); + return needtofree; + } + } + + neh = uwb_rc_neh_add(rc, cmd, expected_type, expected_event, cb, arg); + if (IS_ERR(neh)) { + result = PTR_ERR(neh); + goto out; + } + + result = rc->cmd(rc, cmd, cmd_size); + uwb_dev_unlock(&rc->uwb_dev); + if (result < 0) + uwb_rc_neh_rm(rc, neh); + else + uwb_rc_neh_arm(rc, neh); + uwb_rc_neh_put(neh); +out: + if (needtofree == 1) + kfree(cmd); + return result < 0 ? result : 0; +} +EXPORT_SYMBOL_GPL(uwb_rc_cmd_async); + +struct uwb_rc_cmd_done_params { + struct completion completion; + struct uwb_rceb *reply; + ssize_t reply_size; +}; + +static void uwb_rc_cmd_done(struct uwb_rc *rc, void *arg, + struct uwb_rceb *reply, ssize_t reply_size) +{ + struct uwb_rc_cmd_done_params *p = (struct uwb_rc_cmd_done_params *)arg; + + if (reply_size > 0) { + if (p->reply) + reply_size = min(p->reply_size, reply_size); + else + p->reply = kmalloc(reply_size, GFP_ATOMIC); + + if (p->reply) + memcpy(p->reply, reply, reply_size); + else + reply_size = -ENOMEM; + } + p->reply_size = reply_size; + complete(&p->completion); +} + + +/** + * Generic function for issuing commands to the Radio Control Interface + * + * @rc: UWB Radio Control descriptor + * @cmd_name: Name of the command being issued (for error messages) + * @cmd: Pointer to rccb structure containing the command; + * normally you embed this structure as the first member of + * the full command structure. + * @cmd_size: Size of the whole command buffer pointed to by @cmd. + * @reply: Pointer to where to store the reply + * @reply_size: @reply's size + * @expected_type: Expected type in the return event + * @expected_event: Expected event code in the return event + * @preply: Here a pointer to where the event data is received will + * be stored. Once done with the data, free with kfree(). + * + * This function is generic; it works for commands that return a fixed + * and known size or for commands that return a variable amount of data. + * + * If a buffer is provided, that is used, although it could be chopped + * to the maximum size of the buffer. If the buffer is NULL, then one + * be allocated in *preply with the whole contents of the reply. + * + * @rc needs to be referenced + */ +static +ssize_t __uwb_rc_cmd(struct uwb_rc *rc, const char *cmd_name, + struct uwb_rccb *cmd, size_t cmd_size, + struct uwb_rceb *reply, size_t reply_size, + u8 expected_type, u16 expected_event, + struct uwb_rceb **preply) +{ + ssize_t result = 0; + struct device *dev = &rc->uwb_dev.dev; + struct uwb_rc_cmd_done_params params; + + init_completion(¶ms.completion); + params.reply = reply; + params.reply_size = reply_size; + + result = uwb_rc_cmd_async(rc, cmd_name, cmd, cmd_size, + expected_type, expected_event, + uwb_rc_cmd_done, ¶ms); + if (result) + return result; + + wait_for_completion(¶ms.completion); + + if (preply) + *preply = params.reply; + + if (params.reply_size < 0) + dev_err(dev, "%s: confirmation event 0x%02x/%04x/%02x " + "reception failed: %d\n", cmd_name, + expected_type, expected_event, cmd->bCommandContext, + (int)params.reply_size); + return params.reply_size; +} + + +/** + * Generic function for issuing commands to the Radio Control Interface + * + * @rc: UWB Radio Control descriptor + * @cmd_name: Name of the command being issued (for error messages) + * @cmd: Pointer to rccb structure containing the command; + * normally you embed this structure as the first member of + * the full command structure. + * @cmd_size: Size of the whole command buffer pointed to by @cmd. + * @reply: Pointer to the beginning of the confirmation event + * buffer. Normally bigger than an 'struct hwarc_rceb'. + * You need to fill out reply->bEventType and reply->wEvent (in + * cpu order) as the function will use them to verify the + * confirmation event. + * @reply_size: Size of the reply buffer + * + * The function checks that the length returned in the reply is at + * least as big as @reply_size; if not, it will be deemed an error and + * -EIO returned. + * + * @rc needs to be referenced + */ +ssize_t uwb_rc_cmd(struct uwb_rc *rc, const char *cmd_name, + struct uwb_rccb *cmd, size_t cmd_size, + struct uwb_rceb *reply, size_t reply_size) +{ + struct device *dev = &rc->uwb_dev.dev; + ssize_t result; + + result = __uwb_rc_cmd(rc, cmd_name, + cmd, cmd_size, reply, reply_size, + reply->bEventType, reply->wEvent, NULL); + + if (result > 0 && result < reply_size) { + dev_err(dev, "%s: not enough data returned for decoding reply " + "(%zu bytes received vs at least %zu needed)\n", + cmd_name, result, reply_size); + result = -EIO; + } + return result; +} +EXPORT_SYMBOL_GPL(uwb_rc_cmd); + + +/** + * Generic function for issuing commands to the Radio Control + * Interface that return an unknown amount of data + * + * @rc: UWB Radio Control descriptor + * @cmd_name: Name of the command being issued (for error messages) + * @cmd: Pointer to rccb structure containing the command; + * normally you embed this structure as the first member of + * the full command structure. + * @cmd_size: Size of the whole command buffer pointed to by @cmd. + * @expected_type: Expected type in the return event + * @expected_event: Expected event code in the return event + * @preply: Here a pointer to where the event data is received will + * be stored. Once done with the data, free with kfree(). + * + * The function checks that the length returned in the reply is at + * least as big as a 'struct uwb_rceb *'; if not, it will be deemed an + * error and -EIO returned. + * + * @rc needs to be referenced + */ +ssize_t uwb_rc_vcmd(struct uwb_rc *rc, const char *cmd_name, + struct uwb_rccb *cmd, size_t cmd_size, + u8 expected_type, u16 expected_event, + struct uwb_rceb **preply) +{ + return __uwb_rc_cmd(rc, cmd_name, cmd, cmd_size, NULL, 0, + expected_type, expected_event, preply); +} +EXPORT_SYMBOL_GPL(uwb_rc_vcmd); + + +/** + * Reset a UWB Host Controller (and all radio settings) + * + * @rc: Host Controller descriptor + * @returns: 0 if ok, < 0 errno code on error + * + * We put the command on kmalloc'ed memory as some arches cannot do + * USB from the stack. The reply event is copied from an stage buffer, + * so it can be in the stack. See WUSB1.0[8.6.2.4] for more details. + */ +int uwb_rc_reset(struct uwb_rc *rc) +{ + int result = -ENOMEM; + struct uwb_rc_evt_confirm reply; + struct uwb_rccb *cmd; + size_t cmd_size = sizeof(*cmd); + + mutex_lock(&rc->uwb_dev.mutex); + cmd = kzalloc(sizeof(*cmd), GFP_KERNEL); + if (cmd == NULL) + goto error_kzalloc; + cmd->bCommandType = UWB_RC_CET_GENERAL; + cmd->wCommand = cpu_to_le16(UWB_RC_CMD_RESET); + reply.rceb.bEventType = UWB_RC_CET_GENERAL; + reply.rceb.wEvent = UWB_RC_CMD_RESET; + result = uwb_rc_cmd(rc, "RESET", cmd, cmd_size, + &reply.rceb, sizeof(reply)); + if (result < 0) + goto error_cmd; + if (reply.bResultCode != UWB_RC_RES_SUCCESS) { + dev_err(&rc->uwb_dev.dev, + "RESET: command execution failed: %s (%d)\n", + uwb_rc_strerror(reply.bResultCode), reply.bResultCode); + result = -EIO; + } +error_cmd: + kfree(cmd); +error_kzalloc: + mutex_unlock(&rc->uwb_dev.mutex); + return result; +} + +int uwbd_msg_handle_reset(struct uwb_event *evt) +{ + struct uwb_rc *rc = evt->rc; + int ret; + + /* Need to prevent the RC hardware module going away while in + the rc->reset() call. */ + if (!try_module_get(rc->owner)) + return 0; + + dev_info(&rc->uwb_dev.dev, "resetting radio controller\n"); + ret = rc->reset(rc); + if (ret) + dev_err(&rc->uwb_dev.dev, "failed to reset hardware: %d\n", ret); + + module_put(rc->owner); + return ret; +} + +/** + * uwb_rc_reset_all - request a reset of the radio controller and PALs + * @rc: the radio controller of the hardware device to be reset. + * + * The full hardware reset of the radio controller and all the PALs + * will be scheduled. + */ +void uwb_rc_reset_all(struct uwb_rc *rc) +{ + struct uwb_event *evt; + + evt = kzalloc(sizeof(struct uwb_event), GFP_ATOMIC); + if (unlikely(evt == NULL)) + return; + + evt->rc = __uwb_rc_get(rc); /* will be put by uwbd's uwbd_event_handle() */ + evt->ts_jiffies = jiffies; + evt->type = UWB_EVT_TYPE_MSG; + evt->message = UWB_EVT_MSG_RESET; + + uwbd_event_queue(evt); +} +EXPORT_SYMBOL_GPL(uwb_rc_reset_all); diff --git a/drivers/uwb/rsv.c b/drivers/uwb/rsv.c new file mode 100644 index 000000000000..bae16204576d --- /dev/null +++ b/drivers/uwb/rsv.c @@ -0,0 +1,680 @@ +/* + * UWB reservation management. + * + * Copyright (C) 2008 Cambridge Silicon Radio Ltd. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include <linux/version.h> +#include <linux/kernel.h> +#include <linux/uwb.h> + +#include "uwb-internal.h" + +static void uwb_rsv_timer(unsigned long arg); + +static const char *rsv_states[] = { + [UWB_RSV_STATE_NONE] = "none", + [UWB_RSV_STATE_O_INITIATED] = "initiated", + [UWB_RSV_STATE_O_PENDING] = "pending", + [UWB_RSV_STATE_O_MODIFIED] = "modified", + [UWB_RSV_STATE_O_ESTABLISHED] = "established", + [UWB_RSV_STATE_T_ACCEPTED] = "accepted", + [UWB_RSV_STATE_T_DENIED] = "denied", + [UWB_RSV_STATE_T_PENDING] = "pending", +}; + +static const char *rsv_types[] = { + [UWB_DRP_TYPE_ALIEN_BP] = "alien-bp", + [UWB_DRP_TYPE_HARD] = "hard", + [UWB_DRP_TYPE_SOFT] = "soft", + [UWB_DRP_TYPE_PRIVATE] = "private", + [UWB_DRP_TYPE_PCA] = "pca", +}; + +/** + * uwb_rsv_state_str - return a string for a reservation state + * @state: the reservation state. + */ +const char *uwb_rsv_state_str(enum uwb_rsv_state state) +{ + if (state < UWB_RSV_STATE_NONE || state >= UWB_RSV_STATE_LAST) + return "unknown"; + return rsv_states[state]; +} +EXPORT_SYMBOL_GPL(uwb_rsv_state_str); + +/** + * uwb_rsv_type_str - return a string for a reservation type + * @type: the reservation type + */ +const char *uwb_rsv_type_str(enum uwb_drp_type type) +{ + if (type < UWB_DRP_TYPE_ALIEN_BP || type > UWB_DRP_TYPE_PCA) + return "invalid"; + return rsv_types[type]; +} +EXPORT_SYMBOL_GPL(uwb_rsv_type_str); + +static void uwb_rsv_dump(struct uwb_rsv *rsv) +{ + struct device *dev = &rsv->rc->uwb_dev.dev; + struct uwb_dev_addr devaddr; + char owner[UWB_ADDR_STRSIZE], target[UWB_ADDR_STRSIZE]; + + uwb_dev_addr_print(owner, sizeof(owner), &rsv->owner->dev_addr); + if (rsv->target.type == UWB_RSV_TARGET_DEV) + devaddr = rsv->target.dev->dev_addr; + else + devaddr = rsv->target.devaddr; + uwb_dev_addr_print(target, sizeof(target), &devaddr); + + dev_dbg(dev, "rsv %s -> %s: %s\n", owner, target, uwb_rsv_state_str(rsv->state)); +} + +/* + * Get a free stream index for a reservation. + * + * If the target is a DevAddr (e.g., a WUSB cluster reservation) then + * the stream is allocated from a pool of per-RC stream indexes, + * otherwise a unique stream index for the target is selected. + */ +static int uwb_rsv_get_stream(struct uwb_rsv *rsv) +{ + struct uwb_rc *rc = rsv->rc; + unsigned long *streams_bm; + int stream; + + switch (rsv->target.type) { + case UWB_RSV_TARGET_DEV: + streams_bm = rsv->target.dev->streams; + break; + case UWB_RSV_TARGET_DEVADDR: + streams_bm = rc->uwb_dev.streams; + break; + default: + return -EINVAL; + } + + stream = find_first_zero_bit(streams_bm, UWB_NUM_STREAMS); + if (stream >= UWB_NUM_STREAMS) + return -EBUSY; + + rsv->stream = stream; + set_bit(stream, streams_bm); + + return 0; +} + +static void uwb_rsv_put_stream(struct uwb_rsv *rsv) +{ + struct uwb_rc *rc = rsv->rc; + unsigned long *streams_bm; + + switch (rsv->target.type) { + case UWB_RSV_TARGET_DEV: + streams_bm = rsv->target.dev->streams; + break; + case UWB_RSV_TARGET_DEVADDR: + streams_bm = rc->uwb_dev.streams; + break; + default: + return; + } + + clear_bit(rsv->stream, streams_bm); +} + +/* + * Generate a MAS allocation with a single row component. + */ +static void uwb_rsv_gen_alloc_row(struct uwb_mas_bm *mas, + int first_mas, int mas_per_zone, + int zs, int ze) +{ + struct uwb_mas_bm col; + int z; + + bitmap_zero(mas->bm, UWB_NUM_MAS); + bitmap_zero(col.bm, UWB_NUM_MAS); + bitmap_fill(col.bm, mas_per_zone); + bitmap_shift_left(col.bm, col.bm, first_mas + zs * UWB_MAS_PER_ZONE, UWB_NUM_MAS); + + for (z = zs; z <= ze; z++) { + bitmap_or(mas->bm, mas->bm, col.bm, UWB_NUM_MAS); + bitmap_shift_left(col.bm, col.bm, UWB_MAS_PER_ZONE, UWB_NUM_MAS); + } +} + +/* + * Allocate some MAS for this reservation based on current local + * availability, the reservation parameters (max_mas, min_mas, + * sparsity), and the WiMedia rules for MAS allocations. + * + * Returns -EBUSY is insufficient free MAS are available. + * + * FIXME: to simplify this, only safe reservations with a single row + * component in zones 1 to 15 are tried (zone 0 is skipped to avoid + * problems with the MAS reserved for the BP). + * + * [ECMA-368] section B.2. + */ +static int uwb_rsv_alloc_mas(struct uwb_rsv *rsv) +{ + static const int safe_mas_in_row[UWB_NUM_ZONES] = { + 8, 7, 6, 5, 4, 4, 4, 4, 4, 4, 4, 4, 4, 3, 2, 1, + }; + int n, r; + struct uwb_mas_bm mas; + bool found = false; + + /* + * Search all valid safe allocations until either: too few MAS + * are available; or the smallest allocation with sufficient + * MAS is found. + * + * The top of the zones are preferred, so space for larger + * allocations is available in the bottom of the zone (e.g., a + * 15 MAS allocation should start in row 14 leaving space for + * a 120 MAS allocation at row 0). + */ + for (n = safe_mas_in_row[0]; n >= 1; n--) { + int num_mas; + + num_mas = n * (UWB_NUM_ZONES - 1); + if (num_mas < rsv->min_mas) + break; + if (found && num_mas < rsv->max_mas) + break; + + for (r = UWB_MAS_PER_ZONE-1; r >= 0; r--) { + if (safe_mas_in_row[r] < n) + continue; + uwb_rsv_gen_alloc_row(&mas, r, n, 1, UWB_NUM_ZONES); + if (uwb_drp_avail_reserve_pending(rsv->rc, &mas) == 0) { + found = true; + break; + } + } + } + + if (!found) + return -EBUSY; + + bitmap_copy(rsv->mas.bm, mas.bm, UWB_NUM_MAS); + return 0; +} + +static void uwb_rsv_stroke_timer(struct uwb_rsv *rsv) +{ + int sframes = UWB_MAX_LOST_BEACONS; + + /* + * Multicast reservations can become established within 1 + * super frame and should not be terminated if no response is + * received. + */ + if (rsv->is_multicast) { + if (rsv->state == UWB_RSV_STATE_O_INITIATED) + sframes = 1; + if (rsv->state == UWB_RSV_STATE_O_ESTABLISHED) + sframes = 0; + } + + rsv->expired = false; + if (sframes > 0) { + /* + * Add an additional 2 superframes to account for the + * time to send the SET DRP IE command. + */ + unsigned timeout_us = (sframes + 2) * UWB_SUPERFRAME_LENGTH_US; + mod_timer(&rsv->timer, jiffies + usecs_to_jiffies(timeout_us)); + } else + del_timer(&rsv->timer); +} + +/* + * Update a reservations state, and schedule an update of the + * transmitted DRP IEs. + */ +static void uwb_rsv_state_update(struct uwb_rsv *rsv, + enum uwb_rsv_state new_state) +{ + rsv->state = new_state; + rsv->ie_valid = false; + + uwb_rsv_dump(rsv); + + uwb_rsv_stroke_timer(rsv); + uwb_rsv_sched_update(rsv->rc); +} + +static void uwb_rsv_callback(struct uwb_rsv *rsv) +{ + if (rsv->callback) + rsv->callback(rsv); +} + +void uwb_rsv_set_state(struct uwb_rsv *rsv, enum uwb_rsv_state new_state) +{ + if (rsv->state == new_state) { + switch (rsv->state) { + case UWB_RSV_STATE_O_ESTABLISHED: + case UWB_RSV_STATE_T_ACCEPTED: + case UWB_RSV_STATE_NONE: + uwb_rsv_stroke_timer(rsv); + break; + default: + /* Expecting a state transition so leave timer + as-is. */ + break; + } + return; + } + + switch (new_state) { + case UWB_RSV_STATE_NONE: + uwb_drp_avail_release(rsv->rc, &rsv->mas); + uwb_rsv_put_stream(rsv); + uwb_rsv_state_update(rsv, UWB_RSV_STATE_NONE); + uwb_rsv_callback(rsv); + break; + case UWB_RSV_STATE_O_INITIATED: + uwb_rsv_state_update(rsv, UWB_RSV_STATE_O_INITIATED); + break; + case UWB_RSV_STATE_O_PENDING: + uwb_rsv_state_update(rsv, UWB_RSV_STATE_O_PENDING); + break; + case UWB_RSV_STATE_O_ESTABLISHED: + uwb_drp_avail_reserve(rsv->rc, &rsv->mas); + uwb_rsv_state_update(rsv, UWB_RSV_STATE_O_ESTABLISHED); + uwb_rsv_callback(rsv); + break; + case UWB_RSV_STATE_T_ACCEPTED: + uwb_drp_avail_reserve(rsv->rc, &rsv->mas); + uwb_rsv_state_update(rsv, UWB_RSV_STATE_T_ACCEPTED); + uwb_rsv_callback(rsv); + break; + case UWB_RSV_STATE_T_DENIED: + uwb_rsv_state_update(rsv, UWB_RSV_STATE_T_DENIED); + break; + default: + dev_err(&rsv->rc->uwb_dev.dev, "unhandled state: %s (%d)\n", + uwb_rsv_state_str(new_state), new_state); + } +} + +static struct uwb_rsv *uwb_rsv_alloc(struct uwb_rc *rc) +{ + struct uwb_rsv *rsv; + + rsv = kzalloc(sizeof(struct uwb_rsv), GFP_KERNEL); + if (!rsv) + return NULL; + + INIT_LIST_HEAD(&rsv->rc_node); + INIT_LIST_HEAD(&rsv->pal_node); + init_timer(&rsv->timer); + rsv->timer.function = uwb_rsv_timer; + rsv->timer.data = (unsigned long)rsv; + + rsv->rc = rc; + + return rsv; +} + +static void uwb_rsv_free(struct uwb_rsv *rsv) +{ + uwb_dev_put(rsv->owner); + if (rsv->target.type == UWB_RSV_TARGET_DEV) + uwb_dev_put(rsv->target.dev); + kfree(rsv); +} + +/** + * uwb_rsv_create - allocate and initialize a UWB reservation structure + * @rc: the radio controller + * @cb: callback to use when the reservation completes or terminates + * @pal_priv: data private to the PAL to be passed in the callback + * + * The callback is called when the state of the reservation changes from: + * + * - pending to accepted + * - pending to denined + * - accepted to terminated + * - pending to terminated + */ +struct uwb_rsv *uwb_rsv_create(struct uwb_rc *rc, uwb_rsv_cb_f cb, void *pal_priv) +{ + struct uwb_rsv *rsv; + + rsv = uwb_rsv_alloc(rc); + if (!rsv) + return NULL; + + rsv->callback = cb; + rsv->pal_priv = pal_priv; + + return rsv; +} +EXPORT_SYMBOL_GPL(uwb_rsv_create); + +void uwb_rsv_remove(struct uwb_rsv *rsv) +{ + if (rsv->state != UWB_RSV_STATE_NONE) + uwb_rsv_set_state(rsv, UWB_RSV_STATE_NONE); + del_timer_sync(&rsv->timer); + list_del(&rsv->rc_node); + uwb_rsv_free(rsv); +} + +/** + * uwb_rsv_destroy - free a UWB reservation structure + * @rsv: the reservation to free + * + * The reservation will be terminated if it is pending or established. + */ +void uwb_rsv_destroy(struct uwb_rsv *rsv) +{ + struct uwb_rc *rc = rsv->rc; + + mutex_lock(&rc->rsvs_mutex); + uwb_rsv_remove(rsv); + mutex_unlock(&rc->rsvs_mutex); +} +EXPORT_SYMBOL_GPL(uwb_rsv_destroy); + +/** + * usb_rsv_establish - start a reservation establishment + * @rsv: the reservation + * + * The PAL should fill in @rsv's owner, target, type, max_mas, + * min_mas, sparsity and is_multicast fields. If the target is a + * uwb_dev it must be referenced. + * + * The reservation's callback will be called when the reservation is + * accepted, denied or times out. + */ +int uwb_rsv_establish(struct uwb_rsv *rsv) +{ + struct uwb_rc *rc = rsv->rc; + int ret; + + mutex_lock(&rc->rsvs_mutex); + + ret = uwb_rsv_get_stream(rsv); + if (ret) + goto out; + + ret = uwb_rsv_alloc_mas(rsv); + if (ret) { + uwb_rsv_put_stream(rsv); + goto out; + } + + list_add_tail(&rsv->rc_node, &rc->reservations); + rsv->owner = &rc->uwb_dev; + uwb_dev_get(rsv->owner); + uwb_rsv_set_state(rsv, UWB_RSV_STATE_O_INITIATED); +out: + mutex_unlock(&rc->rsvs_mutex); + return ret; +} +EXPORT_SYMBOL_GPL(uwb_rsv_establish); + +/** + * uwb_rsv_modify - modify an already established reservation + * @rsv: the reservation to modify + * @max_mas: new maximum MAS to reserve + * @min_mas: new minimum MAS to reserve + * @sparsity: new sparsity to use + * + * FIXME: implement this once there are PALs that use it. + */ +int uwb_rsv_modify(struct uwb_rsv *rsv, int max_mas, int min_mas, int sparsity) +{ + return -ENOSYS; +} +EXPORT_SYMBOL_GPL(uwb_rsv_modify); + +/** + * uwb_rsv_terminate - terminate an established reservation + * @rsv: the reservation to terminate + * + * A reservation is terminated by removing the DRP IE from the beacon, + * the other end will consider the reservation to be terminated when + * it does not see the DRP IE for at least mMaxLostBeacons. + * + * If applicable, the reference to the target uwb_dev will be released. + */ +void uwb_rsv_terminate(struct uwb_rsv *rsv) +{ + struct uwb_rc *rc = rsv->rc; + + mutex_lock(&rc->rsvs_mutex); + + uwb_rsv_set_state(rsv, UWB_RSV_STATE_NONE); + + mutex_unlock(&rc->rsvs_mutex); +} +EXPORT_SYMBOL_GPL(uwb_rsv_terminate); + +/** + * uwb_rsv_accept - accept a new reservation from a peer + * @rsv: the reservation + * @cb: call back for reservation changes + * @pal_priv: data to be passed in the above call back + * + * Reservation requests from peers are denied unless a PAL accepts it + * by calling this function. + */ +void uwb_rsv_accept(struct uwb_rsv *rsv, uwb_rsv_cb_f cb, void *pal_priv) +{ + rsv->callback = cb; + rsv->pal_priv = pal_priv; + rsv->state = UWB_RSV_STATE_T_ACCEPTED; +} +EXPORT_SYMBOL_GPL(uwb_rsv_accept); + +/* + * Is a received DRP IE for this reservation? + */ +static bool uwb_rsv_match(struct uwb_rsv *rsv, struct uwb_dev *src, + struct uwb_ie_drp *drp_ie) +{ + struct uwb_dev_addr *rsv_src; + int stream; + + stream = uwb_ie_drp_stream_index(drp_ie); + + if (rsv->stream != stream) + return false; + + switch (rsv->target.type) { + case UWB_RSV_TARGET_DEVADDR: + return rsv->stream == stream; + case UWB_RSV_TARGET_DEV: + if (uwb_ie_drp_owner(drp_ie)) + rsv_src = &rsv->owner->dev_addr; + else + rsv_src = &rsv->target.dev->dev_addr; + return uwb_dev_addr_cmp(&src->dev_addr, rsv_src) == 0; + } + return false; +} + +static struct uwb_rsv *uwb_rsv_new_target(struct uwb_rc *rc, + struct uwb_dev *src, + struct uwb_ie_drp *drp_ie) +{ + struct uwb_rsv *rsv; + struct uwb_pal *pal; + enum uwb_rsv_state state; + + rsv = uwb_rsv_alloc(rc); + if (!rsv) + return NULL; + + rsv->rc = rc; + rsv->owner = src; + uwb_dev_get(rsv->owner); + rsv->target.type = UWB_RSV_TARGET_DEV; + rsv->target.dev = &rc->uwb_dev; + rsv->type = uwb_ie_drp_type(drp_ie); + rsv->stream = uwb_ie_drp_stream_index(drp_ie); + set_bit(rsv->stream, rsv->owner->streams); + uwb_drp_ie_to_bm(&rsv->mas, drp_ie); + + /* + * See if any PALs are interested in this reservation. If not, + * deny the request. + */ + rsv->state = UWB_RSV_STATE_T_DENIED; + spin_lock(&rc->pal_lock); + list_for_each_entry(pal, &rc->pals, node) { + if (pal->new_rsv) + pal->new_rsv(rsv); + if (rsv->state == UWB_RSV_STATE_T_ACCEPTED) + break; + } + spin_unlock(&rc->pal_lock); + + list_add_tail(&rsv->rc_node, &rc->reservations); + state = rsv->state; + rsv->state = UWB_RSV_STATE_NONE; + uwb_rsv_set_state(rsv, state); + + return rsv; +} + +/** + * uwb_rsv_find - find a reservation for a received DRP IE. + * @rc: the radio controller + * @src: source of the DRP IE + * @drp_ie: the DRP IE + * + * If the reservation cannot be found and the DRP IE is from a peer + * attempting to establish a new reservation, create a new reservation + * and add it to the list. + */ +struct uwb_rsv *uwb_rsv_find(struct uwb_rc *rc, struct uwb_dev *src, + struct uwb_ie_drp *drp_ie) +{ + struct uwb_rsv *rsv; + + list_for_each_entry(rsv, &rc->reservations, rc_node) { + if (uwb_rsv_match(rsv, src, drp_ie)) + return rsv; + } + + if (uwb_ie_drp_owner(drp_ie)) + return uwb_rsv_new_target(rc, src, drp_ie); + + return NULL; +} + +/* + * Go through all the reservations and check for timeouts and (if + * necessary) update their DRP IEs. + * + * FIXME: look at building the SET_DRP_IE command here rather than + * having to rescan the list in uwb_rc_send_all_drp_ie(). + */ +static bool uwb_rsv_update_all(struct uwb_rc *rc) +{ + struct uwb_rsv *rsv, *t; + bool ie_updated = false; + + list_for_each_entry_safe(rsv, t, &rc->reservations, rc_node) { + if (rsv->expired) + uwb_drp_handle_timeout(rsv); + if (!rsv->ie_valid) { + uwb_drp_ie_update(rsv); + ie_updated = true; + } + } + + return ie_updated; +} + +void uwb_rsv_sched_update(struct uwb_rc *rc) +{ + queue_work(rc->rsv_workq, &rc->rsv_update_work); +} + +/* + * Update DRP IEs and, if necessary, the DRP Availability IE and send + * the updated IEs to the radio controller. + */ +static void uwb_rsv_update_work(struct work_struct *work) +{ + struct uwb_rc *rc = container_of(work, struct uwb_rc, rsv_update_work); + bool ie_updated; + + mutex_lock(&rc->rsvs_mutex); + + ie_updated = uwb_rsv_update_all(rc); + + if (!rc->drp_avail.ie_valid) { + uwb_drp_avail_ie_update(rc); + ie_updated = true; + } + + if (ie_updated) + uwb_rc_send_all_drp_ie(rc); + + mutex_unlock(&rc->rsvs_mutex); +} + +static void uwb_rsv_timer(unsigned long arg) +{ + struct uwb_rsv *rsv = (struct uwb_rsv *)arg; + + rsv->expired = true; + uwb_rsv_sched_update(rsv->rc); +} + +void uwb_rsv_init(struct uwb_rc *rc) +{ + INIT_LIST_HEAD(&rc->reservations); + mutex_init(&rc->rsvs_mutex); + INIT_WORK(&rc->rsv_update_work, uwb_rsv_update_work); + + bitmap_complement(rc->uwb_dev.streams, rc->uwb_dev.streams, UWB_NUM_STREAMS); +} + +int uwb_rsv_setup(struct uwb_rc *rc) +{ + char name[16]; + + snprintf(name, sizeof(name), "%s_rsvd", dev_name(&rc->uwb_dev.dev)); + rc->rsv_workq = create_singlethread_workqueue(name); + if (rc->rsv_workq == NULL) + return -ENOMEM; + + return 0; +} + +void uwb_rsv_cleanup(struct uwb_rc *rc) +{ + struct uwb_rsv *rsv, *t; + + mutex_lock(&rc->rsvs_mutex); + list_for_each_entry_safe(rsv, t, &rc->reservations, rc_node) { + uwb_rsv_remove(rsv); + } + mutex_unlock(&rc->rsvs_mutex); + + cancel_work_sync(&rc->rsv_update_work); + destroy_workqueue(rc->rsv_workq); +} diff --git a/drivers/uwb/scan.c b/drivers/uwb/scan.c new file mode 100644 index 000000000000..2d270748f32b --- /dev/null +++ b/drivers/uwb/scan.c @@ -0,0 +1,133 @@ +/* + * Ultra Wide Band + * Scanning management + * + * Copyright (C) 2005-2006 Intel Corporation + * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + * + * + * + * FIXME: docs + * FIXME: there are issues here on how BEACON and SCAN on USB RCI deal + * with each other. Currently seems that START_BEACON while + * SCAN_ONLY will cancel the scan, so we need to update the + * state here. Clarification request sent by email on + * 10/05/2005. + * 10/28/2005 No clear answer heard--maybe we'll hack the API + * so that when we start beaconing, if the HC is + * scanning in a mode not compatible with beaconing + * we just fail. + */ + +#include <linux/device.h> +#include <linux/err.h> +#include "uwb-internal.h" + + +/** + * Start/stop scanning in a radio controller + * + * @rc: UWB Radio Controlller + * @channel: Channel to scan; encodings in WUSB1.0[Table 5.12] + * @type: Type of scanning to do. + * @bpst_offset: value at which to start scanning (if type == + * UWB_SCAN_ONLY_STARTTIME) + * @returns: 0 if ok, < 0 errno code on error + * + * We put the command on kmalloc'ed memory as some arches cannot do + * USB from the stack. The reply event is copied from an stage buffer, + * so it can be in the stack. See WUSB1.0[8.6.2.4] for more details. + */ +int uwb_rc_scan(struct uwb_rc *rc, + unsigned channel, enum uwb_scan_type type, + unsigned bpst_offset) +{ + int result; + struct uwb_rc_cmd_scan *cmd; + struct uwb_rc_evt_confirm reply; + + result = -ENOMEM; + cmd = kzalloc(sizeof(*cmd), GFP_KERNEL); + if (cmd == NULL) + goto error_kzalloc; + mutex_lock(&rc->uwb_dev.mutex); + cmd->rccb.bCommandType = UWB_RC_CET_GENERAL; + cmd->rccb.wCommand = cpu_to_le16(UWB_RC_CMD_SCAN); + cmd->bChannelNumber = channel; + cmd->bScanState = type; + cmd->wStartTime = cpu_to_le16(bpst_offset); + reply.rceb.bEventType = UWB_RC_CET_GENERAL; + reply.rceb.wEvent = UWB_RC_CMD_SCAN; + result = uwb_rc_cmd(rc, "SCAN", &cmd->rccb, sizeof(*cmd), + &reply.rceb, sizeof(reply)); + if (result < 0) + goto error_cmd; + if (reply.bResultCode != UWB_RC_RES_SUCCESS) { + dev_err(&rc->uwb_dev.dev, + "SCAN: command execution failed: %s (%d)\n", + uwb_rc_strerror(reply.bResultCode), reply.bResultCode); + result = -EIO; + goto error_cmd; + } + rc->scanning = channel; + rc->scan_type = type; +error_cmd: + mutex_unlock(&rc->uwb_dev.mutex); + kfree(cmd); +error_kzalloc: + return result; +} + +/* + * Print scanning state + */ +static ssize_t uwb_rc_scan_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct uwb_dev *uwb_dev = to_uwb_dev(dev); + struct uwb_rc *rc = uwb_dev->rc; + ssize_t result; + + mutex_lock(&rc->uwb_dev.mutex); + result = sprintf(buf, "%d %d\n", rc->scanning, rc->scan_type); + mutex_unlock(&rc->uwb_dev.mutex); + return result; +} + +/* + * + */ +static ssize_t uwb_rc_scan_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t size) +{ + struct uwb_dev *uwb_dev = to_uwb_dev(dev); + struct uwb_rc *rc = uwb_dev->rc; + unsigned channel; + unsigned type; + unsigned bpst_offset = 0; + ssize_t result = -EINVAL; + + result = sscanf(buf, "%u %u %u\n", &channel, &type, &bpst_offset); + if (result >= 2 && type < UWB_SCAN_TOP) + result = uwb_rc_scan(rc, channel, type, bpst_offset); + + return result < 0 ? result : size; +} + +/** Radio Control sysfs interface (declaration) */ +DEVICE_ATTR(scan, S_IRUGO | S_IWUSR, uwb_rc_scan_show, uwb_rc_scan_store); diff --git a/drivers/uwb/umc-bus.c b/drivers/uwb/umc-bus.c new file mode 100644 index 000000000000..2d8d62d9f53e --- /dev/null +++ b/drivers/uwb/umc-bus.c @@ -0,0 +1,218 @@ +/* + * Bus for UWB Multi-interface Controller capabilities. + * + * Copyright (C) 2007 Cambridge Silicon Radio Ltd. + * + * This file is released under the GNU GPL v2. + */ +#include <linux/kernel.h> +#include <linux/sysfs.h> +#include <linux/workqueue.h> +#include <linux/uwb/umc.h> +#include <linux/pci.h> + +static int umc_bus_unbind_helper(struct device *dev, void *data) +{ + struct device *parent = data; + + if (dev->parent == parent && dev->driver) + device_release_driver(dev); + return 0; +} + +/** + * umc_controller_reset - reset the whole UMC controller + * @umc: the UMC device for the radio controller. + * + * Drivers will be unbound from all UMC devices belonging to the + * controller and then the radio controller will be rebound. The + * radio controller is expected to do a full hardware reset when it is + * probed. + * + * If this is called while a probe() or remove() is in progress it + * will return -EAGAIN and not perform the reset. + */ +int umc_controller_reset(struct umc_dev *umc) +{ + struct device *parent = umc->dev.parent; + int ret; + + if (down_trylock(&parent->sem)) + return -EAGAIN; + bus_for_each_dev(&umc_bus_type, NULL, parent, umc_bus_unbind_helper); + ret = device_attach(&umc->dev); + if (ret == 1) + ret = 0; + up(&parent->sem); + + return ret; +} +EXPORT_SYMBOL_GPL(umc_controller_reset); + +/** + * umc_match_pci_id - match a UMC driver to a UMC device's parent PCI device. + * @umc_drv: umc driver with match_data pointing to a zero-terminated + * table of pci_device_id's. + * @umc: umc device whose parent is to be matched. + */ +int umc_match_pci_id(struct umc_driver *umc_drv, struct umc_dev *umc) +{ + const struct pci_device_id *id_table = umc_drv->match_data; + struct pci_dev *pci; + + if (umc->dev.parent->bus != &pci_bus_type) + return 0; + + pci = to_pci_dev(umc->dev.parent); + return pci_match_id(id_table, pci) != NULL; +} +EXPORT_SYMBOL_GPL(umc_match_pci_id); + +static int umc_bus_rescan_helper(struct device *dev, void *data) +{ + int ret = 0; + + if (!dev->driver) + ret = device_attach(dev); + + return ret < 0 ? ret : 0; +} + +static void umc_bus_rescan(void) +{ + int err; + + /* + * We can't use bus_rescan_devices() here as it deadlocks when + * it tries to retake the dev->parent semaphore. + */ + err = bus_for_each_dev(&umc_bus_type, NULL, NULL, umc_bus_rescan_helper); + if (err < 0) + printk(KERN_WARNING "%s: rescan of bus failed: %d\n", + KBUILD_MODNAME, err); +} + +static int umc_bus_match(struct device *dev, struct device_driver *drv) +{ + struct umc_dev *umc = to_umc_dev(dev); + struct umc_driver *umc_driver = to_umc_driver(drv); + + if (umc->cap_id == umc_driver->cap_id) { + if (umc_driver->match) + return umc_driver->match(umc_driver, umc); + else + return 1; + } + return 0; +} + +static int umc_device_probe(struct device *dev) +{ + struct umc_dev *umc; + struct umc_driver *umc_driver; + int err; + + umc_driver = to_umc_driver(dev->driver); + umc = to_umc_dev(dev); + + get_device(dev); + err = umc_driver->probe(umc); + if (err) + put_device(dev); + else + umc_bus_rescan(); + + return err; +} + +static int umc_device_remove(struct device *dev) +{ + struct umc_dev *umc; + struct umc_driver *umc_driver; + + umc_driver = to_umc_driver(dev->driver); + umc = to_umc_dev(dev); + + umc_driver->remove(umc); + put_device(dev); + return 0; +} + +static int umc_device_suspend(struct device *dev, pm_message_t state) +{ + struct umc_dev *umc; + struct umc_driver *umc_driver; + int err = 0; + + umc = to_umc_dev(dev); + + if (dev->driver) { + umc_driver = to_umc_driver(dev->driver); + if (umc_driver->suspend) + err = umc_driver->suspend(umc, state); + } + return err; +} + +static int umc_device_resume(struct device *dev) +{ + struct umc_dev *umc; + struct umc_driver *umc_driver; + int err = 0; + + umc = to_umc_dev(dev); + + if (dev->driver) { + umc_driver = to_umc_driver(dev->driver); + if (umc_driver->resume) + err = umc_driver->resume(umc); + } + return err; +} + +static ssize_t capability_id_show(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct umc_dev *umc = to_umc_dev(dev); + + return sprintf(buf, "0x%02x\n", umc->cap_id); +} + +static ssize_t version_show(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct umc_dev *umc = to_umc_dev(dev); + + return sprintf(buf, "0x%04x\n", umc->version); +} + +static struct device_attribute umc_dev_attrs[] = { + __ATTR_RO(capability_id), + __ATTR_RO(version), + __ATTR_NULL, +}; + +struct bus_type umc_bus_type = { + .name = "umc", + .match = umc_bus_match, + .probe = umc_device_probe, + .remove = umc_device_remove, + .suspend = umc_device_suspend, + .resume = umc_device_resume, + .dev_attrs = umc_dev_attrs, +}; +EXPORT_SYMBOL_GPL(umc_bus_type); + +static int __init umc_bus_init(void) +{ + return bus_register(&umc_bus_type); +} +module_init(umc_bus_init); + +static void __exit umc_bus_exit(void) +{ + bus_unregister(&umc_bus_type); +} +module_exit(umc_bus_exit); + +MODULE_DESCRIPTION("UWB Multi-interface Controller capability bus"); +MODULE_AUTHOR("Cambridge Silicon Radio Ltd."); +MODULE_LICENSE("GPL"); diff --git a/drivers/uwb/umc-dev.c b/drivers/uwb/umc-dev.c new file mode 100644 index 000000000000..aa44e1c1a102 --- /dev/null +++ b/drivers/uwb/umc-dev.c @@ -0,0 +1,104 @@ +/* + * UWB Multi-interface Controller device management. + * + * Copyright (C) 2007 Cambridge Silicon Radio Ltd. + * + * This file is released under the GNU GPL v2. + */ +#include <linux/kernel.h> +#include <linux/uwb/umc.h> +#define D_LOCAL 0 +#include <linux/uwb/debug.h> + +static void umc_device_release(struct device *dev) +{ + struct umc_dev *umc = to_umc_dev(dev); + + kfree(umc); +} + +/** + * umc_device_create - allocate a child UMC device + * @parent: parent of the new UMC device. + * @n: index of the new device. + * + * The new UMC device will have a bus ID of the parent with '-n' + * appended. + */ +struct umc_dev *umc_device_create(struct device *parent, int n) +{ + struct umc_dev *umc; + + umc = kzalloc(sizeof(struct umc_dev), GFP_KERNEL); + if (umc) { + snprintf(umc->dev.bus_id, sizeof(umc->dev.bus_id), "%s-%d", + parent->bus_id, n); + umc->dev.parent = parent; + umc->dev.bus = &umc_bus_type; + umc->dev.release = umc_device_release; + + umc->dev.dma_mask = parent->dma_mask; + } + return umc; +} +EXPORT_SYMBOL_GPL(umc_device_create); + +/** + * umc_device_register - register a UMC device + * @umc: pointer to the UMC device + * + * The memory resource for the UMC device is acquired and the device + * registered with the system. + */ +int umc_device_register(struct umc_dev *umc) +{ + int err; + + d_fnstart(3, &umc->dev, "(umc_dev %p)\n", umc); + + err = request_resource(umc->resource.parent, &umc->resource); + if (err < 0) { + dev_err(&umc->dev, "can't allocate resource range " + "%016Lx to %016Lx: %d\n", + (unsigned long long)umc->resource.start, + (unsigned long long)umc->resource.end, + err); + goto error_request_resource; + } + + err = device_register(&umc->dev); + if (err < 0) + goto error_device_register; + d_fnend(3, &umc->dev, "(umc_dev %p) = 0\n", umc); + return 0; + +error_device_register: + release_resource(&umc->resource); +error_request_resource: + d_fnend(3, &umc->dev, "(umc_dev %p) = %d\n", umc, err); + return err; +} +EXPORT_SYMBOL_GPL(umc_device_register); + +/** + * umc_device_unregister - unregister a UMC device + * @umc: pointer to the UMC device + * + * First we unregister the device, make sure the driver can do it's + * resource release thing and then we try to release any left over + * resources. We take a ref to the device, to make sure it doesn't + * dissapear under our feet. + */ +void umc_device_unregister(struct umc_dev *umc) +{ + struct device *dev; + if (!umc) + return; + dev = get_device(&umc->dev); + d_fnstart(3, dev, "(umc_dev %p)\n", umc); + device_unregister(&umc->dev); + release_resource(&umc->resource); + d_fnend(3, dev, "(umc_dev %p) = void\n", umc); + put_device(dev); +} +EXPORT_SYMBOL_GPL(umc_device_unregister); diff --git a/drivers/uwb/umc-drv.c b/drivers/uwb/umc-drv.c new file mode 100644 index 000000000000..367b5eb85d60 --- /dev/null +++ b/drivers/uwb/umc-drv.c @@ -0,0 +1,31 @@ +/* + * UWB Multi-interface Controller driver management. + * + * Copyright (C) 2007 Cambridge Silicon Radio Ltd. + * + * This file is released under the GNU GPL v2. + */ +#include <linux/kernel.h> +#include <linux/uwb/umc.h> + +int __umc_driver_register(struct umc_driver *umc_drv, struct module *module, + const char *mod_name) +{ + umc_drv->driver.name = umc_drv->name; + umc_drv->driver.owner = module; + umc_drv->driver.mod_name = mod_name; + umc_drv->driver.bus = &umc_bus_type; + + return driver_register(&umc_drv->driver); +} +EXPORT_SYMBOL_GPL(__umc_driver_register); + +/** + * umc_driver_register - unregister a UMC capabiltity driver. + * @umc_drv: pointer to the driver. + */ +void umc_driver_unregister(struct umc_driver *umc_drv) +{ + driver_unregister(&umc_drv->driver); +} +EXPORT_SYMBOL_GPL(umc_driver_unregister); diff --git a/drivers/uwb/uwb-debug.c b/drivers/uwb/uwb-debug.c new file mode 100644 index 000000000000..6d232c35d07d --- /dev/null +++ b/drivers/uwb/uwb-debug.c @@ -0,0 +1,367 @@ +/* + * Ultra Wide Band + * Debug support + * + * Copyright (C) 2005-2006 Intel Corporation + * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + * + * + * FIXME: doc + */ + +#include <linux/spinlock.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/notifier.h> +#include <linux/device.h> +#include <linux/debugfs.h> +#include <linux/uaccess.h> +#include <linux/seq_file.h> + +#include <linux/uwb/debug-cmd.h> +#define D_LOCAL 0 +#include <linux/uwb/debug.h> + +#include "uwb-internal.h" + +void dump_bytes(struct device *dev, const void *_buf, size_t rsize) +{ + const char *buf = _buf; + char line[32]; + size_t offset = 0; + int cnt, cnt2; + for (cnt = 0; cnt < rsize; cnt += 8) { + size_t rtop = rsize - cnt < 8 ? rsize - cnt : 8; + for (offset = cnt2 = 0; cnt2 < rtop; cnt2++) { + offset += scnprintf(line + offset, sizeof(line) - offset, + "%02x ", buf[cnt + cnt2] & 0xff); + } + if (dev) + dev_info(dev, "%s\n", line); + else + printk(KERN_INFO "%s\n", line); + } +} +EXPORT_SYMBOL_GPL(dump_bytes); + +/* + * Debug interface + * + * Per radio controller debugfs files (in uwb/uwbN/): + * + * command: Flexible command interface (see <linux/uwb/debug-cmd.h>). + * + * reservations: information on reservations. + * + * accept: Set to true (Y or 1) to accept reservation requests from + * peers. + * + * drp_avail: DRP availability information. + */ + +struct uwb_dbg { + struct uwb_pal pal; + + u32 accept; + struct list_head rsvs; + + struct dentry *root_d; + struct dentry *command_f; + struct dentry *reservations_f; + struct dentry *accept_f; + struct dentry *drp_avail_f; +}; + +static struct dentry *root_dir; + +static void uwb_dbg_rsv_cb(struct uwb_rsv *rsv) +{ + struct uwb_rc *rc = rsv->rc; + struct device *dev = &rc->uwb_dev.dev; + struct uwb_dev_addr devaddr; + char owner[UWB_ADDR_STRSIZE], target[UWB_ADDR_STRSIZE]; + + uwb_dev_addr_print(owner, sizeof(owner), &rsv->owner->dev_addr); + if (rsv->target.type == UWB_RSV_TARGET_DEV) + devaddr = rsv->target.dev->dev_addr; + else + devaddr = rsv->target.devaddr; + uwb_dev_addr_print(target, sizeof(target), &devaddr); + + dev_dbg(dev, "debug: rsv %s -> %s: %s\n", + owner, target, uwb_rsv_state_str(rsv->state)); +} + +static int cmd_rsv_establish(struct uwb_rc *rc, + struct uwb_dbg_cmd_rsv_establish *cmd) +{ + struct uwb_mac_addr macaddr; + struct uwb_rsv *rsv; + struct uwb_dev *target; + int ret; + + memcpy(&macaddr, cmd->target, sizeof(macaddr)); + target = uwb_dev_get_by_macaddr(rc, &macaddr); + if (target == NULL) + return -ENODEV; + + rsv = uwb_rsv_create(rc, uwb_dbg_rsv_cb, NULL); + if (rsv == NULL) { + uwb_dev_put(target); + return -ENOMEM; + } + + rsv->owner = &rc->uwb_dev; + rsv->target.type = UWB_RSV_TARGET_DEV; + rsv->target.dev = target; + rsv->type = cmd->type; + rsv->max_mas = cmd->max_mas; + rsv->min_mas = cmd->min_mas; + rsv->sparsity = cmd->sparsity; + + ret = uwb_rsv_establish(rsv); + if (ret) + uwb_rsv_destroy(rsv); + else + list_add_tail(&rsv->pal_node, &rc->dbg->rsvs); + + return ret; +} + +static int cmd_rsv_terminate(struct uwb_rc *rc, + struct uwb_dbg_cmd_rsv_terminate *cmd) +{ + struct uwb_rsv *rsv, *found = NULL; + int i = 0; + + list_for_each_entry(rsv, &rc->dbg->rsvs, pal_node) { + if (i == cmd->index) { + found = rsv; + break; + } + } + if (!found) + return -EINVAL; + + list_del(&found->pal_node); + uwb_rsv_terminate(found); + + return 0; +} + +static int command_open(struct inode *inode, struct file *file) +{ + file->private_data = inode->i_private; + + return 0; +} + +static ssize_t command_write(struct file *file, const char __user *buf, + size_t len, loff_t *off) +{ + struct uwb_rc *rc = file->private_data; + struct uwb_dbg_cmd cmd; + int ret; + + if (len != sizeof(struct uwb_dbg_cmd)) + return -EINVAL; + + if (copy_from_user(&cmd, buf, len) != 0) + return -EFAULT; + + switch (cmd.type) { + case UWB_DBG_CMD_RSV_ESTABLISH: + ret = cmd_rsv_establish(rc, &cmd.rsv_establish); + break; + case UWB_DBG_CMD_RSV_TERMINATE: + ret = cmd_rsv_terminate(rc, &cmd.rsv_terminate); + break; + default: + return -EINVAL; + } + + return ret < 0 ? ret : len; +} + +static struct file_operations command_fops = { + .open = command_open, + .write = command_write, + .read = NULL, + .llseek = no_llseek, + .owner = THIS_MODULE, +}; + +static int reservations_print(struct seq_file *s, void *p) +{ + struct uwb_rc *rc = s->private; + struct uwb_rsv *rsv; + + mutex_lock(&rc->rsvs_mutex); + + list_for_each_entry(rsv, &rc->reservations, rc_node) { + struct uwb_dev_addr devaddr; + char owner[UWB_ADDR_STRSIZE], target[UWB_ADDR_STRSIZE]; + bool is_owner; + char buf[72]; + + uwb_dev_addr_print(owner, sizeof(owner), &rsv->owner->dev_addr); + if (rsv->target.type == UWB_RSV_TARGET_DEV) { + devaddr = rsv->target.dev->dev_addr; + is_owner = &rc->uwb_dev == rsv->owner; + } else { + devaddr = rsv->target.devaddr; + is_owner = true; + } + uwb_dev_addr_print(target, sizeof(target), &devaddr); + + seq_printf(s, "%c %s -> %s: %s\n", + is_owner ? 'O' : 'T', + owner, target, uwb_rsv_state_str(rsv->state)); + seq_printf(s, " stream: %d type: %s\n", + rsv->stream, uwb_rsv_type_str(rsv->type)); + bitmap_scnprintf(buf, sizeof(buf), rsv->mas.bm, UWB_NUM_MAS); + seq_printf(s, " %s\n", buf); + } + + mutex_unlock(&rc->rsvs_mutex); + + return 0; +} + +static int reservations_open(struct inode *inode, struct file *file) +{ + return single_open(file, reservations_print, inode->i_private); +} + +static struct file_operations reservations_fops = { + .open = reservations_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, + .owner = THIS_MODULE, +}; + +static int drp_avail_print(struct seq_file *s, void *p) +{ + struct uwb_rc *rc = s->private; + char buf[72]; + + bitmap_scnprintf(buf, sizeof(buf), rc->drp_avail.global, UWB_NUM_MAS); + seq_printf(s, "global: %s\n", buf); + bitmap_scnprintf(buf, sizeof(buf), rc->drp_avail.local, UWB_NUM_MAS); + seq_printf(s, "local: %s\n", buf); + bitmap_scnprintf(buf, sizeof(buf), rc->drp_avail.pending, UWB_NUM_MAS); + seq_printf(s, "pending: %s\n", buf); + + return 0; +} + +static int drp_avail_open(struct inode *inode, struct file *file) +{ + return single_open(file, drp_avail_print, inode->i_private); +} + +static struct file_operations drp_avail_fops = { + .open = drp_avail_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, + .owner = THIS_MODULE, +}; + +static void uwb_dbg_new_rsv(struct uwb_rsv *rsv) +{ + struct uwb_rc *rc = rsv->rc; + + if (rc->dbg->accept) + uwb_rsv_accept(rsv, uwb_dbg_rsv_cb, NULL); +} + +/** + * uwb_dbg_add_rc - add a debug interface for a radio controller + * @rc: the radio controller + */ +void uwb_dbg_add_rc(struct uwb_rc *rc) +{ + rc->dbg = kzalloc(sizeof(struct uwb_dbg), GFP_KERNEL); + if (rc->dbg == NULL) + return; + + INIT_LIST_HEAD(&rc->dbg->rsvs); + + uwb_pal_init(&rc->dbg->pal); + rc->dbg->pal.new_rsv = uwb_dbg_new_rsv; + uwb_pal_register(rc, &rc->dbg->pal); + if (root_dir) { + rc->dbg->root_d = debugfs_create_dir(dev_name(&rc->uwb_dev.dev), + root_dir); + rc->dbg->command_f = debugfs_create_file("command", 0200, + rc->dbg->root_d, rc, + &command_fops); + rc->dbg->reservations_f = debugfs_create_file("reservations", 0444, + rc->dbg->root_d, rc, + &reservations_fops); + rc->dbg->accept_f = debugfs_create_bool("accept", 0644, + rc->dbg->root_d, + &rc->dbg->accept); + rc->dbg->drp_avail_f = debugfs_create_file("drp_avail", 0444, + rc->dbg->root_d, rc, + &drp_avail_fops); + } +} + +/** + * uwb_dbg_add_rc - remove a radio controller's debug interface + * @rc: the radio controller + */ +void uwb_dbg_del_rc(struct uwb_rc *rc) +{ + struct uwb_rsv *rsv, *t; + + if (rc->dbg == NULL) + return; + + list_for_each_entry_safe(rsv, t, &rc->dbg->rsvs, pal_node) { + uwb_rsv_destroy(rsv); + } + + uwb_pal_unregister(rc, &rc->dbg->pal); + + if (root_dir) { + debugfs_remove(rc->dbg->drp_avail_f); + debugfs_remove(rc->dbg->accept_f); + debugfs_remove(rc->dbg->reservations_f); + debugfs_remove(rc->dbg->command_f); + debugfs_remove(rc->dbg->root_d); + } +} + +/** + * uwb_dbg_exit - initialize the debug interface sub-module + */ +void uwb_dbg_init(void) +{ + root_dir = debugfs_create_dir("uwb", NULL); +} + +/** + * uwb_dbg_exit - clean-up the debug interface sub-module + */ +void uwb_dbg_exit(void) +{ + debugfs_remove(root_dir); +} diff --git a/drivers/uwb/uwb-internal.h b/drivers/uwb/uwb-internal.h new file mode 100644 index 000000000000..2ad307d12961 --- /dev/null +++ b/drivers/uwb/uwb-internal.h @@ -0,0 +1,305 @@ +/* + * Ultra Wide Band + * UWB internal API + * + * Copyright (C) 2005-2006 Intel Corporation + * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + * + * This contains most of the internal API for UWB. This is stuff used + * across the stack that of course, is of no interest to the rest. + * + * Some parts might end up going public (like uwb_rc_*())... + */ + +#ifndef __UWB_INTERNAL_H__ +#define __UWB_INTERNAL_H__ + +#include <linux/version.h> +#include <linux/kernel.h> +#include <linux/device.h> +#include <linux/uwb.h> +#include <linux/mutex.h> + +struct uwb_beca_e; + +/* General device API */ +extern void uwb_dev_init(struct uwb_dev *uwb_dev); +extern int __uwb_dev_offair(struct uwb_dev *, struct uwb_rc *); +extern int uwb_dev_add(struct uwb_dev *uwb_dev, struct device *parent_dev, + struct uwb_rc *parent_rc); +extern void uwb_dev_rm(struct uwb_dev *uwb_dev); +extern void uwbd_dev_onair(struct uwb_rc *, struct uwb_beca_e *); +extern void uwbd_dev_offair(struct uwb_beca_e *); +void uwb_notify(struct uwb_rc *rc, struct uwb_dev *uwb_dev, enum uwb_notifs event); + +/* General UWB Radio Controller Internal API */ +extern struct uwb_rc *__uwb_rc_try_get(struct uwb_rc *); +static inline struct uwb_rc *__uwb_rc_get(struct uwb_rc *rc) +{ + uwb_dev_get(&rc->uwb_dev); + return rc; +} + +static inline void __uwb_rc_put(struct uwb_rc *rc) +{ + uwb_dev_put(&rc->uwb_dev); +} + +extern int uwb_rc_reset(struct uwb_rc *rc); +extern int uwb_rc_beacon(struct uwb_rc *rc, + int channel, unsigned bpst_offset); +extern int uwb_rc_scan(struct uwb_rc *rc, + unsigned channel, enum uwb_scan_type type, + unsigned bpst_offset); +extern int uwb_rc_send_all_drp_ie(struct uwb_rc *rc); +extern ssize_t uwb_rc_print_IEs(struct uwb_rc *rc, char *, size_t); +extern void uwb_rc_ie_init(struct uwb_rc *); +extern void uwb_rc_ie_init(struct uwb_rc *); +extern ssize_t uwb_rc_ie_setup(struct uwb_rc *); +extern void uwb_rc_ie_release(struct uwb_rc *); +extern int uwb_rc_ie_add(struct uwb_rc *, + const struct uwb_ie_hdr *, size_t); +extern int uwb_rc_ie_rm(struct uwb_rc *, enum uwb_ie); + +extern const char *uwb_rc_strerror(unsigned code); + +/* + * Time to wait for a response to an RC command. + * + * Some commands can take a long time to response. e.g., START_BEACON + * may scan for several superframes before joining an existing beacon + * group and this can take around 600 ms. + */ +#define UWB_RC_CMD_TIMEOUT_MS 1000 /* ms */ + +/* + * Notification/Event Handlers + */ + +struct uwb_rc_neh; + +void uwb_rc_neh_create(struct uwb_rc *rc); +void uwb_rc_neh_destroy(struct uwb_rc *rc); + +struct uwb_rc_neh *uwb_rc_neh_add(struct uwb_rc *rc, struct uwb_rccb *cmd, + u8 expected_type, u16 expected_event, + uwb_rc_cmd_cb_f cb, void *arg); +void uwb_rc_neh_rm(struct uwb_rc *rc, struct uwb_rc_neh *neh); +void uwb_rc_neh_arm(struct uwb_rc *rc, struct uwb_rc_neh *neh); +void uwb_rc_neh_put(struct uwb_rc_neh *neh); + +/* Event size tables */ +extern int uwb_est_create(void); +extern void uwb_est_destroy(void); + + +/* + * UWB Events & management daemon + */ + +/** + * enum uwb_event_type - types of UWB management daemon events + * + * The UWB management daemon (uwbd) can receive two types of events: + * UWB_EVT_TYPE_NOTIF - notification from the radio controller. + * UWB_EVT_TYPE_MSG - a simple message. + */ +enum uwb_event_type { + UWB_EVT_TYPE_NOTIF, + UWB_EVT_TYPE_MSG, +}; + +/** + * struct uwb_event_notif - an event for a radio controller notification + * @size: Size of the buffer (ie: Guaranteed to contain at least + * a full 'struct uwb_rceb') + * @rceb: Pointer to a kmalloced() event payload + */ +struct uwb_event_notif { + size_t size; + struct uwb_rceb *rceb; +}; + +/** + * enum uwb_event_message - an event for a message for asynchronous processing + * + * UWB_EVT_MSG_RESET - reset the radio controller and all PAL hardware. + */ +enum uwb_event_message { + UWB_EVT_MSG_RESET, +}; + +/** + * UWB Event + * @rc: Radio controller that emitted the event (referenced) + * @ts_jiffies: Timestamp, when was it received + * @type: This event's type. + */ +struct uwb_event { + struct list_head list_node; + struct uwb_rc *rc; + unsigned long ts_jiffies; + enum uwb_event_type type; + union { + struct uwb_event_notif notif; + enum uwb_event_message message; + }; +}; + +extern void uwbd_start(void); +extern void uwbd_stop(void); +extern struct uwb_event *uwb_event_alloc(size_t, gfp_t gfp_mask); +extern void uwbd_event_queue(struct uwb_event *); +void uwbd_flush(struct uwb_rc *rc); + +/* UWB event handlers */ +extern int uwbd_evt_handle_rc_beacon(struct uwb_event *); +extern int uwbd_evt_handle_rc_beacon_size(struct uwb_event *); +extern int uwbd_evt_handle_rc_bpoie_change(struct uwb_event *); +extern int uwbd_evt_handle_rc_bp_slot_change(struct uwb_event *); +extern int uwbd_evt_handle_rc_drp(struct uwb_event *); +extern int uwbd_evt_handle_rc_drp_avail(struct uwb_event *); + +int uwbd_msg_handle_reset(struct uwb_event *evt); + + +/* + * Address management + */ +int uwb_rc_dev_addr_assign(struct uwb_rc *rc); +int uwbd_evt_handle_rc_dev_addr_conflict(struct uwb_event *evt); + +/* + * UWB Beacon Cache + * + * Each beacon we received is kept in a cache--when we receive that + * beacon consistently, that means there is a new device that we have + * to add to the system. + */ + +extern unsigned long beacon_timeout_ms; + +/** Beacon cache list */ +struct uwb_beca { + struct list_head list; + size_t entries; + struct mutex mutex; +}; + +extern struct uwb_beca uwb_beca; + +/** + * Beacon cache entry + * + * @jiffies_refresh: last time a beacon was received that refreshed + * this cache entry. + * @uwb_dev: device connected to this beacon. This pointer is not + * safe, you need to get it with uwb_dev_try_get() + * + * @hits: how many time we have seen this beacon since last time we + * cleared it + */ +struct uwb_beca_e { + struct mutex mutex; + struct kref refcnt; + struct list_head node; + struct uwb_mac_addr *mac_addr; + struct uwb_dev_addr dev_addr; + u8 hits; + unsigned long ts_jiffies; + struct uwb_dev *uwb_dev; + struct uwb_rc_evt_beacon *be; + struct stats lqe_stats, rssi_stats; /* radio statistics */ +}; +struct uwb_beacon_frame; +extern ssize_t uwb_bce_print_IEs(struct uwb_dev *, struct uwb_beca_e *, + char *, size_t); +extern struct uwb_beca_e *__uwb_beca_add(struct uwb_rc_evt_beacon *, + struct uwb_beacon_frame *, + unsigned long); + +extern void uwb_bce_kfree(struct kref *_bce); +static inline void uwb_bce_get(struct uwb_beca_e *bce) +{ + kref_get(&bce->refcnt); +} +static inline void uwb_bce_put(struct uwb_beca_e *bce) +{ + kref_put(&bce->refcnt, uwb_bce_kfree); +} +extern void uwb_beca_purge(void); +extern void uwb_beca_release(void); + +struct uwb_dev *uwb_dev_get_by_devaddr(struct uwb_rc *rc, + const struct uwb_dev_addr *devaddr); +struct uwb_dev *uwb_dev_get_by_macaddr(struct uwb_rc *rc, + const struct uwb_mac_addr *macaddr); + +/* -- UWB Sysfs representation */ +extern struct class uwb_rc_class; +extern struct device_attribute dev_attr_mac_address; +extern struct device_attribute dev_attr_beacon; +extern struct device_attribute dev_attr_scan; + +/* -- DRP Bandwidth allocator: bandwidth allocations, reservations, DRP */ +void uwb_rsv_init(struct uwb_rc *rc); +int uwb_rsv_setup(struct uwb_rc *rc); +void uwb_rsv_cleanup(struct uwb_rc *rc); + +void uwb_rsv_set_state(struct uwb_rsv *rsv, enum uwb_rsv_state new_state); +void uwb_rsv_remove(struct uwb_rsv *rsv); +struct uwb_rsv *uwb_rsv_find(struct uwb_rc *rc, struct uwb_dev *src, + struct uwb_ie_drp *drp_ie); +void uwb_rsv_sched_update(struct uwb_rc *rc); + +void uwb_drp_handle_timeout(struct uwb_rsv *rsv); +int uwb_drp_ie_update(struct uwb_rsv *rsv); +void uwb_drp_ie_to_bm(struct uwb_mas_bm *bm, const struct uwb_ie_drp *drp_ie); + +void uwb_drp_avail_init(struct uwb_rc *rc); +int uwb_drp_avail_reserve_pending(struct uwb_rc *rc, struct uwb_mas_bm *mas); +void uwb_drp_avail_reserve(struct uwb_rc *rc, struct uwb_mas_bm *mas); +void uwb_drp_avail_release(struct uwb_rc *rc, struct uwb_mas_bm *mas); +void uwb_drp_avail_ie_update(struct uwb_rc *rc); + +/* -- PAL support */ +void uwb_rc_pal_init(struct uwb_rc *rc); + +/* -- Misc */ + +extern ssize_t uwb_mac_frame_hdr_print(char *, size_t, + const struct uwb_mac_frame_hdr *); + +/* -- Debug interface */ +void uwb_dbg_init(void); +void uwb_dbg_exit(void); +void uwb_dbg_add_rc(struct uwb_rc *rc); +void uwb_dbg_del_rc(struct uwb_rc *rc); + +/* Workarounds for version specific stuff */ + +static inline void uwb_dev_lock(struct uwb_dev *uwb_dev) +{ + down(&uwb_dev->dev.sem); +} + +static inline void uwb_dev_unlock(struct uwb_dev *uwb_dev) +{ + up(&uwb_dev->dev.sem); +} + +#endif /* #ifndef __UWB_INTERNAL_H__ */ diff --git a/drivers/uwb/uwbd.c b/drivers/uwb/uwbd.c new file mode 100644 index 000000000000..78908416e42c --- /dev/null +++ b/drivers/uwb/uwbd.c @@ -0,0 +1,410 @@ +/* + * Ultra Wide Band + * Neighborhood Management Daemon + * + * Copyright (C) 2005-2006 Intel Corporation + * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + * + * + * This daemon takes care of maintaing information that describes the + * UWB neighborhood that the radios in this machine can see. It also + * keeps a tab of which devices are visible, makes sure each HC sits + * on a different channel to avoid interfering, etc. + * + * Different drivers (radio controller, device, any API in general) + * communicate with this daemon through an event queue. Daemon wakes + * up, takes a list of events and handles them one by one; handling + * function is extracted from a table based on the event's type and + * subtype. Events are freed only if the handling function says so. + * + * . Lock protecting the event list has to be an spinlock and locked + * with IRQSAVE because it might be called from an interrupt + * context (ie: when events arrive and the notification drops + * down from the ISR). + * + * . UWB radio controller drivers queue events to the daemon using + * uwbd_event_queue(). They just get the event, chew it to make it + * look like UWBD likes it and pass it in a buffer allocated with + * uwb_event_alloc(). + * + * EVENTS + * + * Events have a type, a subtype, a lenght, some other stuff and the + * data blob, which depends on the event. The header is 'struct + * uwb_event'; for payloads, see 'struct uwbd_evt_*'. + * + * EVENT HANDLER TABLES + * + * To find a handling function for an event, the type is used to index + * a subtype-table in the type-table. The subtype-table is indexed + * with the subtype to get the function that handles the event. Start + * with the main type-table 'uwbd_evt_type_handler'. + * + * DEVICES + * + * Devices are created when a bunch of beacons have been received and + * it is stablished that the device has stable radio presence. CREATED + * only, not configured. Devices are ONLY configured when an + * Application-Specific IE Probe is receieved, in which the device + * declares which Protocol ID it groks. Then the device is CONFIGURED + * (and the driver->probe() stuff of the device model is invoked). + * + * Devices are considered disconnected when a certain number of + * beacons are not received in an amount of time. + * + * Handler functions are called normally uwbd_evt_handle_*(). + */ + +#include <linux/kthread.h> +#include <linux/module.h> +#include <linux/freezer.h> +#include "uwb-internal.h" + +#define D_LOCAL 1 +#include <linux/uwb/debug.h> + + +/** + * UWBD Event handler function signature + * + * Return !0 if the event needs not to be freed (ie the handler + * takes/took care of it). 0 means the daemon code will free the + * event. + * + * @evt->rc is already referenced and guaranteed to exist. See + * uwb_evt_handle(). + */ +typedef int (*uwbd_evt_handler_f)(struct uwb_event *); + +/** + * Properties of a UWBD event + * + * @handler: the function that will handle this event + * @name: text name of event + */ +struct uwbd_event { + uwbd_evt_handler_f handler; + const char *name; +}; + +/** Table of handlers for and properties of the UWBD Radio Control Events */ +static +struct uwbd_event uwbd_events[] = { + [UWB_RC_EVT_BEACON] = { + .handler = uwbd_evt_handle_rc_beacon, + .name = "BEACON_RECEIVED" + }, + [UWB_RC_EVT_BEACON_SIZE] = { + .handler = uwbd_evt_handle_rc_beacon_size, + .name = "BEACON_SIZE_CHANGE" + }, + [UWB_RC_EVT_BPOIE_CHANGE] = { + .handler = uwbd_evt_handle_rc_bpoie_change, + .name = "BPOIE_CHANGE" + }, + [UWB_RC_EVT_BP_SLOT_CHANGE] = { + .handler = uwbd_evt_handle_rc_bp_slot_change, + .name = "BP_SLOT_CHANGE" + }, + [UWB_RC_EVT_DRP_AVAIL] = { + .handler = uwbd_evt_handle_rc_drp_avail, + .name = "DRP_AVAILABILITY_CHANGE" + }, + [UWB_RC_EVT_DRP] = { + .handler = uwbd_evt_handle_rc_drp, + .name = "DRP" + }, + [UWB_RC_EVT_DEV_ADDR_CONFLICT] = { + .handler = uwbd_evt_handle_rc_dev_addr_conflict, + .name = "DEV_ADDR_CONFLICT", + }, +}; + + + +struct uwbd_evt_type_handler { + const char *name; + struct uwbd_event *uwbd_events; + size_t size; +}; + +#define UWBD_EVT_TYPE_HANDLER(n,a) { \ + .name = (n), \ + .uwbd_events = (a), \ + .size = sizeof(a)/sizeof((a)[0]) \ +} + + +/** Table of handlers for each UWBD Event type. */ +static +struct uwbd_evt_type_handler uwbd_evt_type_handlers[] = { + [UWB_RC_CET_GENERAL] = UWBD_EVT_TYPE_HANDLER("RC", uwbd_events) +}; + +static const +size_t uwbd_evt_type_handlers_len = + sizeof(uwbd_evt_type_handlers) / sizeof(uwbd_evt_type_handlers[0]); + +static const struct uwbd_event uwbd_message_handlers[] = { + [UWB_EVT_MSG_RESET] = { + .handler = uwbd_msg_handle_reset, + .name = "reset", + }, +}; + +static DEFINE_MUTEX(uwbd_event_mutex); + +/** + * Handle an URC event passed to the UWB Daemon + * + * @evt: the event to handle + * @returns: 0 if the event can be kfreed, !0 on the contrary + * (somebody else took ownership) [coincidentally, returning + * a <0 errno code will free it :)]. + * + * Looks up the two indirection tables (one for the type, one for the + * subtype) to decide which function handles it and then calls the + * handler. + * + * The event structure passed to the event handler has the radio + * controller in @evt->rc referenced. The reference will be dropped + * once the handler returns, so if it needs it for longer (async), + * it'll need to take another one. + */ +static +int uwbd_event_handle_urc(struct uwb_event *evt) +{ + struct uwbd_evt_type_handler *type_table; + uwbd_evt_handler_f handler; + u8 type, context; + u16 event; + + type = evt->notif.rceb->bEventType; + event = le16_to_cpu(evt->notif.rceb->wEvent); + context = evt->notif.rceb->bEventContext; + + if (type > uwbd_evt_type_handlers_len) { + printk(KERN_ERR "UWBD: event type %u: unknown (too high)\n", type); + return -EINVAL; + } + type_table = &uwbd_evt_type_handlers[type]; + if (type_table->uwbd_events == NULL) { + printk(KERN_ERR "UWBD: event type %u: unknown\n", type); + return -EINVAL; + } + if (event > type_table->size) { + printk(KERN_ERR "UWBD: event %s[%u]: unknown (too high)\n", + type_table->name, event); + return -EINVAL; + } + handler = type_table->uwbd_events[event].handler; + if (handler == NULL) { + printk(KERN_ERR "UWBD: event %s[%u]: unknown\n", type_table->name, event); + return -EINVAL; + } + return (*handler)(evt); +} + +static void uwbd_event_handle_message(struct uwb_event *evt) +{ + struct uwb_rc *rc; + int result; + + rc = evt->rc; + + if (evt->message < 0 || evt->message >= ARRAY_SIZE(uwbd_message_handlers)) { + dev_err(&rc->uwb_dev.dev, "UWBD: invalid message type %d\n", evt->message); + return; + } + + /* If this is a reset event we need to drop the + * uwbd_event_mutex or it deadlocks when the reset handler + * attempts to flush the uwbd events. */ + if (evt->message == UWB_EVT_MSG_RESET) + mutex_unlock(&uwbd_event_mutex); + + result = uwbd_message_handlers[evt->message].handler(evt); + if (result < 0) + dev_err(&rc->uwb_dev.dev, "UWBD: '%s' message failed: %d\n", + uwbd_message_handlers[evt->message].name, result); + + if (evt->message == UWB_EVT_MSG_RESET) + mutex_lock(&uwbd_event_mutex); +} + +static void uwbd_event_handle(struct uwb_event *evt) +{ + struct uwb_rc *rc; + int should_keep; + + rc = evt->rc; + + if (rc->ready) { + switch (evt->type) { + case UWB_EVT_TYPE_NOTIF: + should_keep = uwbd_event_handle_urc(evt); + if (should_keep <= 0) + kfree(evt->notif.rceb); + break; + case UWB_EVT_TYPE_MSG: + uwbd_event_handle_message(evt); + break; + default: + dev_err(&rc->uwb_dev.dev, "UWBD: invalid event type %d\n", evt->type); + break; + } + } + + __uwb_rc_put(rc); /* for the __uwb_rc_get() in uwb_rc_notif_cb() */ +} +/* The UWB Daemon */ + + +/** Daemon's PID: used to decide if we can queue or not */ +static int uwbd_pid; +/** Daemon's task struct for managing the kthread */ +static struct task_struct *uwbd_task; +/** Daemon's waitqueue for waiting for new events */ +static DECLARE_WAIT_QUEUE_HEAD(uwbd_wq); +/** Daemon's list of events; we queue/dequeue here */ +static struct list_head uwbd_event_list = LIST_HEAD_INIT(uwbd_event_list); +/** Daemon's list lock to protect concurent access */ +static DEFINE_SPINLOCK(uwbd_event_list_lock); + + +/** + * UWB Daemon + * + * Listens to all UWB notifications and takes care to track the state + * of the UWB neighboorhood for the kernel. When we do a run, we + * spinlock, move the list to a private copy and release the + * lock. Hold it as little as possible. Not a conflict: it is + * guaranteed we own the events in the private list. + * + * FIXME: should change so we don't have a 1HZ timer all the time, but + * only if there are devices. + */ +static int uwbd(void *unused) +{ + unsigned long flags; + struct list_head list = LIST_HEAD_INIT(list); + struct uwb_event *evt, *nxt; + int should_stop = 0; + while (1) { + wait_event_interruptible_timeout( + uwbd_wq, + !list_empty(&uwbd_event_list) + || (should_stop = kthread_should_stop()), + HZ); + if (should_stop) + break; + try_to_freeze(); + + mutex_lock(&uwbd_event_mutex); + spin_lock_irqsave(&uwbd_event_list_lock, flags); + list_splice_init(&uwbd_event_list, &list); + spin_unlock_irqrestore(&uwbd_event_list_lock, flags); + list_for_each_entry_safe(evt, nxt, &list, list_node) { + list_del(&evt->list_node); + uwbd_event_handle(evt); + kfree(evt); + } + mutex_unlock(&uwbd_event_mutex); + + uwb_beca_purge(); /* Purge devices that left */ + } + return 0; +} + + +/** Start the UWB daemon */ +void uwbd_start(void) +{ + uwbd_task = kthread_run(uwbd, NULL, "uwbd"); + if (uwbd_task == NULL) + printk(KERN_ERR "UWB: Cannot start management daemon; " + "UWB won't work\n"); + else + uwbd_pid = uwbd_task->pid; +} + +/* Stop the UWB daemon and free any unprocessed events */ +void uwbd_stop(void) +{ + unsigned long flags; + struct uwb_event *evt, *nxt; + kthread_stop(uwbd_task); + spin_lock_irqsave(&uwbd_event_list_lock, flags); + uwbd_pid = 0; + list_for_each_entry_safe(evt, nxt, &uwbd_event_list, list_node) { + if (evt->type == UWB_EVT_TYPE_NOTIF) + kfree(evt->notif.rceb); + kfree(evt); + } + spin_unlock_irqrestore(&uwbd_event_list_lock, flags); + uwb_beca_release(); +} + +/* + * Queue an event for the management daemon + * + * When some lower layer receives an event, it uses this function to + * push it forward to the UWB daemon. + * + * Once you pass the event, you don't own it any more, but the daemon + * does. It will uwb_event_free() it when done, so make sure you + * uwb_event_alloc()ed it or bad things will happen. + * + * If the daemon is not running, we just free the event. + */ +void uwbd_event_queue(struct uwb_event *evt) +{ + unsigned long flags; + spin_lock_irqsave(&uwbd_event_list_lock, flags); + if (uwbd_pid != 0) { + list_add(&evt->list_node, &uwbd_event_list); + wake_up_all(&uwbd_wq); + } else { + __uwb_rc_put(evt->rc); + if (evt->type == UWB_EVT_TYPE_NOTIF) + kfree(evt->notif.rceb); + kfree(evt); + } + spin_unlock_irqrestore(&uwbd_event_list_lock, flags); + return; +} + +void uwbd_flush(struct uwb_rc *rc) +{ + struct uwb_event *evt, *nxt; + + mutex_lock(&uwbd_event_mutex); + + spin_lock_irq(&uwbd_event_list_lock); + list_for_each_entry_safe(evt, nxt, &uwbd_event_list, list_node) { + if (evt->rc == rc) { + __uwb_rc_put(rc); + list_del(&evt->list_node); + if (evt->type == UWB_EVT_TYPE_NOTIF) + kfree(evt->notif.rceb); + kfree(evt); + } + } + spin_unlock_irq(&uwbd_event_list_lock); + + mutex_unlock(&uwbd_event_mutex); +} diff --git a/drivers/uwb/whc-rc.c b/drivers/uwb/whc-rc.c new file mode 100644 index 000000000000..1711deadb114 --- /dev/null +++ b/drivers/uwb/whc-rc.c @@ -0,0 +1,520 @@ +/* + * Wireless Host Controller: Radio Control Interface (WHCI v0.95[2.3]) + * Radio Control command/event transport to the UWB stack + * + * Copyright (C) 2005-2006 Intel Corporation + * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + * + * + * Initialize and hook up the Radio Control interface. + * + * For each device probed, creates an 'struct whcrc' which contains + * just the representation of the UWB Radio Controller, and the logic + * for reading notifications and passing them to the UWB Core. + * + * So we initialize all of those, register the UWB Radio Controller + * and setup the notification/event handle to pipe the notifications + * to the UWB management Daemon. + * + * Once uwb_rc_add() is called, the UWB stack takes control, resets + * the radio and readies the device to take commands the UWB + * API/user-space. + * + * Note this driver is just a transport driver; the commands are + * formed at the UWB stack and given to this driver who will deliver + * them to the hw and transfer the replies/notifications back to the + * UWB stack through the UWB daemon (UWBD). + */ +#include <linux/version.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/dma-mapping.h> +#include <linux/interrupt.h> +#include <linux/workqueue.h> +#include <linux/uwb.h> +#include <linux/uwb/whci.h> +#include <linux/uwb/umc.h> +#include "uwb-internal.h" + +#define D_LOCAL 0 +#include <linux/uwb/debug.h> + +/** + * Descriptor for an instance of the UWB Radio Control Driver that + * attaches to the URC interface of the WHCI PCI card. + * + * Unless there is a lock specific to the 'data members', all access + * is protected by uwb_rc->mutex. + */ +struct whcrc { + struct umc_dev *umc_dev; + struct uwb_rc *uwb_rc; /* UWB host controller */ + + unsigned long area; + void __iomem *rc_base; + size_t rc_len; + spinlock_t irq_lock; + + void *evt_buf, *cmd_buf; + dma_addr_t evt_dma_buf, cmd_dma_buf; + wait_queue_head_t cmd_wq; + struct work_struct event_work; +}; + +/** + * Execute an UWB RC command on WHCI/RC + * + * @rc: Instance of a Radio Controller that is a whcrc + * @cmd: Buffer containing the RCCB and payload to execute + * @cmd_size: Size of the command buffer. + * + * We copy the command into whcrc->cmd_buf (as it is pretty and + * aligned`and physically contiguous) and then press the right keys in + * the controller's URCCMD register to get it to read it. We might + * have to wait for the cmd_sem to be open to us. + * + * NOTE: rc's mutex has to be locked + */ +static int whcrc_cmd(struct uwb_rc *uwb_rc, + const struct uwb_rccb *cmd, size_t cmd_size) +{ + int result = 0; + struct whcrc *whcrc = uwb_rc->priv; + struct device *dev = &whcrc->umc_dev->dev; + u32 urccmd; + + d_fnstart(3, dev, "(%p, %p, %zu)\n", uwb_rc, cmd, cmd_size); + might_sleep(); + + if (cmd_size >= 4096) { + result = -E2BIG; + goto error; + } + + /* + * If the URC is halted, then the hardware has reset itself. + * Attempt to recover by restarting the device and then return + * an error as it's likely that the current command isn't + * valid for a newly started RC. + */ + if (le_readl(whcrc->rc_base + URCSTS) & URCSTS_HALTED) { + dev_err(dev, "requesting reset of halted radio controller\n"); + uwb_rc_reset_all(uwb_rc); + result = -EIO; + goto error; + } + + result = wait_event_timeout(whcrc->cmd_wq, + !(le_readl(whcrc->rc_base + URCCMD) & URCCMD_ACTIVE), HZ/2); + if (result == 0) { + dev_err(dev, "device is not ready to execute commands\n"); + result = -ETIMEDOUT; + goto error; + } + + memmove(whcrc->cmd_buf, cmd, cmd_size); + le_writeq(whcrc->cmd_dma_buf, whcrc->rc_base + URCCMDADDR); + + spin_lock(&whcrc->irq_lock); + urccmd = le_readl(whcrc->rc_base + URCCMD); + urccmd &= ~(URCCMD_EARV | URCCMD_SIZE_MASK); + le_writel(urccmd | URCCMD_ACTIVE | URCCMD_IWR | cmd_size, + whcrc->rc_base + URCCMD); + spin_unlock(&whcrc->irq_lock); + +error: + d_fnend(3, dev, "(%p, %p, %zu) = %d\n", + uwb_rc, cmd, cmd_size, result); + return result; +} + +static int whcrc_reset(struct uwb_rc *rc) +{ + struct whcrc *whcrc = rc->priv; + + return umc_controller_reset(whcrc->umc_dev); +} + +/** + * Reset event reception mechanism and tell hw we are ready to get more + * + * We have read all the events in the event buffer, so we are ready to + * reset it to the beginning. + * + * This is only called during initialization or after an event buffer + * has been retired. This means we can be sure that event processing + * is disabled and it's safe to update the URCEVTADDR register. + * + * There's no need to wait for the event processing to start as the + * URC will not clear URCCMD_ACTIVE until (internal) event buffer + * space is available. + */ +static +void whcrc_enable_events(struct whcrc *whcrc) +{ + struct device *dev = &whcrc->umc_dev->dev; + u32 urccmd; + + d_fnstart(4, dev, "(whcrc %p)\n", whcrc); + + le_writeq(whcrc->evt_dma_buf, whcrc->rc_base + URCEVTADDR); + + spin_lock(&whcrc->irq_lock); + urccmd = le_readl(whcrc->rc_base + URCCMD) & ~URCCMD_ACTIVE; + le_writel(urccmd | URCCMD_EARV, whcrc->rc_base + URCCMD); + spin_unlock(&whcrc->irq_lock); + + d_fnend(4, dev, "(whcrc %p) = void\n", whcrc); +} + +static void whcrc_event_work(struct work_struct *work) +{ + struct whcrc *whcrc = container_of(work, struct whcrc, event_work); + struct device *dev = &whcrc->umc_dev->dev; + size_t size; + u64 urcevtaddr; + + urcevtaddr = le_readq(whcrc->rc_base + URCEVTADDR); + size = urcevtaddr & URCEVTADDR_OFFSET_MASK; + + d_printf(3, dev, "received %zu octet event\n", size); + d_dump(4, dev, whcrc->evt_buf, size > 32 ? 32 : size); + + uwb_rc_neh_grok(whcrc->uwb_rc, whcrc->evt_buf, size); + whcrc_enable_events(whcrc); +} + +/** + * Catch interrupts? + * + * We ack inmediately (and expect the hw to do the right thing and + * raise another IRQ if things have changed :) + */ +static +irqreturn_t whcrc_irq_cb(int irq, void *_whcrc) +{ + struct whcrc *whcrc = _whcrc; + struct device *dev = &whcrc->umc_dev->dev; + u32 urcsts; + + urcsts = le_readl(whcrc->rc_base + URCSTS); + if (!(urcsts & URCSTS_INT_MASK)) + return IRQ_NONE; + le_writel(urcsts & URCSTS_INT_MASK, whcrc->rc_base + URCSTS); + + d_printf(4, dev, "acked 0x%08x, urcsts 0x%08x\n", + le_readl(whcrc->rc_base + URCSTS), urcsts); + + if (urcsts & URCSTS_HSE) { + dev_err(dev, "host system error -- hardware halted\n"); + /* FIXME: do something sensible here */ + goto out; + } + if (urcsts & URCSTS_ER) { + d_printf(3, dev, "ER: event ready\n"); + schedule_work(&whcrc->event_work); + } + if (urcsts & URCSTS_RCI) { + d_printf(3, dev, "RCI: ready to execute another command\n"); + wake_up_all(&whcrc->cmd_wq); + } +out: + return IRQ_HANDLED; +} + + +/** + * Initialize a UMC RC interface: map regions, get (shared) IRQ + */ +static +int whcrc_setup_rc_umc(struct whcrc *whcrc) +{ + int result = 0; + struct device *dev = &whcrc->umc_dev->dev; + struct umc_dev *umc_dev = whcrc->umc_dev; + + whcrc->area = umc_dev->resource.start; + whcrc->rc_len = umc_dev->resource.end - umc_dev->resource.start + 1; + result = -EBUSY; + if (request_mem_region(whcrc->area, whcrc->rc_len, KBUILD_MODNAME) + == NULL) { + dev_err(dev, "can't request URC region (%zu bytes @ 0x%lx): %d\n", + whcrc->rc_len, whcrc->area, result); + goto error_request_region; + } + + whcrc->rc_base = ioremap_nocache(whcrc->area, whcrc->rc_len); + if (whcrc->rc_base == NULL) { + dev_err(dev, "can't ioremap registers (%zu bytes @ 0x%lx): %d\n", + whcrc->rc_len, whcrc->area, result); + goto error_ioremap_nocache; + } + + result = request_irq(umc_dev->irq, whcrc_irq_cb, IRQF_SHARED, + KBUILD_MODNAME, whcrc); + if (result < 0) { + dev_err(dev, "can't allocate IRQ %d: %d\n", + umc_dev->irq, result); + goto error_request_irq; + } + + result = -ENOMEM; + whcrc->cmd_buf = dma_alloc_coherent(&umc_dev->dev, PAGE_SIZE, + &whcrc->cmd_dma_buf, GFP_KERNEL); + if (whcrc->cmd_buf == NULL) { + dev_err(dev, "Can't allocate cmd transfer buffer\n"); + goto error_cmd_buffer; + } + + whcrc->evt_buf = dma_alloc_coherent(&umc_dev->dev, PAGE_SIZE, + &whcrc->evt_dma_buf, GFP_KERNEL); + if (whcrc->evt_buf == NULL) { + dev_err(dev, "Can't allocate evt transfer buffer\n"); + goto error_evt_buffer; + } + d_printf(3, dev, "UWB RC Interface: %zu bytes at 0x%p, irq %u\n", + whcrc->rc_len, whcrc->rc_base, umc_dev->irq); + return 0; + +error_evt_buffer: + dma_free_coherent(&umc_dev->dev, PAGE_SIZE, whcrc->cmd_buf, + whcrc->cmd_dma_buf); +error_cmd_buffer: + free_irq(umc_dev->irq, whcrc); +error_request_irq: + iounmap(whcrc->rc_base); +error_ioremap_nocache: + release_mem_region(whcrc->area, whcrc->rc_len); +error_request_region: + return result; +} + + +/** + * Release RC's UMC resources + */ +static +void whcrc_release_rc_umc(struct whcrc *whcrc) +{ + struct umc_dev *umc_dev = whcrc->umc_dev; + + dma_free_coherent(&umc_dev->dev, PAGE_SIZE, whcrc->evt_buf, + whcrc->evt_dma_buf); + dma_free_coherent(&umc_dev->dev, PAGE_SIZE, whcrc->cmd_buf, + whcrc->cmd_dma_buf); + free_irq(umc_dev->irq, whcrc); + iounmap(whcrc->rc_base); + release_mem_region(whcrc->area, whcrc->rc_len); +} + + +/** + * whcrc_start_rc - start a WHCI radio controller + * @whcrc: the radio controller to start + * + * Reset the UMC device, start the radio controller, enable events and + * finally enable interrupts. + */ +static int whcrc_start_rc(struct uwb_rc *rc) +{ + struct whcrc *whcrc = rc->priv; + int result = 0; + struct device *dev = &whcrc->umc_dev->dev; + unsigned long start, duration; + + /* Reset the thing */ + le_writel(URCCMD_RESET, whcrc->rc_base + URCCMD); + if (d_test(3)) + start = jiffies; + if (whci_wait_for(dev, whcrc->rc_base + URCCMD, URCCMD_RESET, 0, + 5000, "device to reset at init") < 0) { + result = -EBUSY; + goto error; + } else if (d_test(3)) { + duration = jiffies - start; + if (duration > msecs_to_jiffies(40)) + dev_err(dev, "Device took %ums to " + "reset. MAX expected: 40ms\n", + jiffies_to_msecs(duration)); + } + + /* Set the event buffer, start the controller (enable IRQs later) */ + le_writel(0, whcrc->rc_base + URCINTR); + le_writel(URCCMD_RS, whcrc->rc_base + URCCMD); + result = -ETIMEDOUT; + if (d_test(3)) + start = jiffies; + if (whci_wait_for(dev, whcrc->rc_base + URCSTS, URCSTS_HALTED, 0, + 5000, "device to start") < 0) + goto error; + if (d_test(3)) { + duration = jiffies - start; + if (duration > msecs_to_jiffies(40)) + dev_err(dev, "Device took %ums to start. " + "MAX expected: 40ms\n", + jiffies_to_msecs(duration)); + } + whcrc_enable_events(whcrc); + result = 0; + le_writel(URCINTR_EN_ALL, whcrc->rc_base + URCINTR); +error: + return result; +} + + +/** + * whcrc_stop_rc - stop a WHCI radio controller + * @whcrc: the radio controller to stop + * + * Disable interrupts and cancel any pending event processing work + * before clearing the Run/Stop bit. + */ +static +void whcrc_stop_rc(struct uwb_rc *rc) +{ + struct whcrc *whcrc = rc->priv; + struct umc_dev *umc_dev = whcrc->umc_dev; + + le_writel(0, whcrc->rc_base + URCINTR); + cancel_work_sync(&whcrc->event_work); + + le_writel(0, whcrc->rc_base + URCCMD); + whci_wait_for(&umc_dev->dev, whcrc->rc_base + URCSTS, + URCSTS_HALTED, 0, 40, "URCSTS.HALTED"); +} + +static void whcrc_init(struct whcrc *whcrc) +{ + spin_lock_init(&whcrc->irq_lock); + init_waitqueue_head(&whcrc->cmd_wq); + INIT_WORK(&whcrc->event_work, whcrc_event_work); +} + +/** + * Initialize the radio controller. + * + * NOTE: we setup whcrc->uwb_rc before calling uwb_rc_add(); in the + * IRQ handler we use that to determine if the hw is ready to + * handle events. Looks like a race condition, but it really is + * not. + */ +static +int whcrc_probe(struct umc_dev *umc_dev) +{ + int result; + struct uwb_rc *uwb_rc; + struct whcrc *whcrc; + struct device *dev = &umc_dev->dev; + + d_fnstart(3, dev, "(umc_dev %p)\n", umc_dev); + result = -ENOMEM; + uwb_rc = uwb_rc_alloc(); + if (uwb_rc == NULL) { + dev_err(dev, "unable to allocate RC instance\n"); + goto error_rc_alloc; + } + whcrc = kzalloc(sizeof(*whcrc), GFP_KERNEL); + if (whcrc == NULL) { + dev_err(dev, "unable to allocate WHC-RC instance\n"); + goto error_alloc; + } + whcrc_init(whcrc); + whcrc->umc_dev = umc_dev; + + result = whcrc_setup_rc_umc(whcrc); + if (result < 0) { + dev_err(dev, "Can't setup RC UMC interface: %d\n", result); + goto error_setup_rc_umc; + } + whcrc->uwb_rc = uwb_rc; + + uwb_rc->owner = THIS_MODULE; + uwb_rc->cmd = whcrc_cmd; + uwb_rc->reset = whcrc_reset; + uwb_rc->start = whcrc_start_rc; + uwb_rc->stop = whcrc_stop_rc; + + result = uwb_rc_add(uwb_rc, dev, whcrc); + if (result < 0) + goto error_rc_add; + umc_set_drvdata(umc_dev, whcrc); + d_fnend(3, dev, "(umc_dev %p) = 0\n", umc_dev); + return 0; + +error_rc_add: + whcrc_release_rc_umc(whcrc); +error_setup_rc_umc: + kfree(whcrc); +error_alloc: + uwb_rc_put(uwb_rc); +error_rc_alloc: + d_fnend(3, dev, "(umc_dev %p) = %d\n", umc_dev, result); + return result; +} + +/** + * Clean up the radio control resources + * + * When we up the command semaphore, everybody possibly held trying to + * execute a command should be granted entry and then they'll see the + * host is quiescing and up it (so it will chain to the next waiter). + * This should not happen (in any case), as we can only remove when + * there are no handles open... + */ +static void whcrc_remove(struct umc_dev *umc_dev) +{ + struct whcrc *whcrc = umc_get_drvdata(umc_dev); + struct uwb_rc *uwb_rc = whcrc->uwb_rc; + + umc_set_drvdata(umc_dev, NULL); + uwb_rc_rm(uwb_rc); + whcrc_release_rc_umc(whcrc); + kfree(whcrc); + uwb_rc_put(uwb_rc); + d_printf(1, &umc_dev->dev, "freed whcrc %p\n", whcrc); +} + +/* PCI device ID's that we handle [so it gets loaded] */ +static struct pci_device_id whcrc_id_table[] = { + { PCI_DEVICE_CLASS(PCI_CLASS_WIRELESS_WHCI, ~0) }, + { /* empty last entry */ } +}; +MODULE_DEVICE_TABLE(pci, whcrc_id_table); + +static struct umc_driver whcrc_driver = { + .name = "whc-rc", + .cap_id = UMC_CAP_ID_WHCI_RC, + .probe = whcrc_probe, + .remove = whcrc_remove, +}; + +static int __init whcrc_driver_init(void) +{ + return umc_driver_register(&whcrc_driver); +} +module_init(whcrc_driver_init); + +static void __exit whcrc_driver_exit(void) +{ + umc_driver_unregister(&whcrc_driver); +} +module_exit(whcrc_driver_exit); + +MODULE_AUTHOR("Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>"); +MODULE_DESCRIPTION("Wireless Host Controller Radio Control Driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/uwb/whci.c b/drivers/uwb/whci.c new file mode 100644 index 000000000000..3df2388f908f --- /dev/null +++ b/drivers/uwb/whci.c @@ -0,0 +1,269 @@ +/* + * WHCI UWB Multi-interface Controller enumerator. + * + * Copyright (C) 2007 Cambridge Silicon Radio Ltd. + * + * This file is released under the GNU GPL v2. + */ +#include <linux/delay.h> +#include <linux/kernel.h> +#include <linux/pci.h> +#include <linux/dma-mapping.h> +#include <linux/uwb/whci.h> +#include <linux/uwb/umc.h> + +struct whci_card { + struct pci_dev *pci; + void __iomem *uwbbase; + u8 n_caps; + struct umc_dev *devs[0]; +}; + + +/* Fix faulty HW :( */ +static +u64 whci_capdata_quirks(struct whci_card *card, u64 capdata) +{ + u64 capdata_orig = capdata; + struct pci_dev *pci_dev = card->pci; + if (pci_dev->vendor == PCI_VENDOR_ID_INTEL + && (pci_dev->device == 0x0c3b || pci_dev->device == 0004) + && pci_dev->class == 0x0d1010) { + switch (UWBCAPDATA_TO_CAP_ID(capdata)) { + /* WLP capability has 0x100 bytes of aperture */ + case 0x80: + capdata |= 0x40 << 8; break; + /* WUSB capability has 0x80 bytes of aperture + * and ID is 1 */ + case 0x02: + capdata &= ~0xffff; + capdata |= 0x2001; + break; + } + } + if (capdata_orig != capdata) + dev_warn(&pci_dev->dev, + "PCI v%04x d%04x c%06x#%02x: " + "corrected capdata from %016Lx to %016Lx\n", + pci_dev->vendor, pci_dev->device, pci_dev->class, + (unsigned)UWBCAPDATA_TO_CAP_ID(capdata), + (unsigned long long)capdata_orig, + (unsigned long long)capdata); + return capdata; +} + + +/** + * whci_wait_for - wait for a WHCI register to be set + * + * Polls (for at most @max_ms ms) until '*@reg & @mask == @result'. + */ +int whci_wait_for(struct device *dev, u32 __iomem *reg, u32 mask, u32 result, + unsigned long max_ms, const char *tag) +{ + unsigned t = 0; + u32 val; + for (;;) { + val = le_readl(reg); + if ((val & mask) == result) + break; + msleep(10); + if (t >= max_ms) { + dev_err(dev, "timed out waiting for %s ", tag); + return -ETIMEDOUT; + } + t += 10; + } + return 0; +} +EXPORT_SYMBOL_GPL(whci_wait_for); + + +/* + * NOTE: the capinfo and capdata registers are slightly different + * (size and cap-id fields). So for cap #0, we need to fill + * in. Size comes from the size of the register block + * (statically calculated); cap_id comes from nowhere, we use + * zero, that is reserved, for the radio controller, because + * none was defined at the spec level. + */ +static int whci_add_cap(struct whci_card *card, int n) +{ + struct umc_dev *umc; + u64 capdata; + int bar, err; + + umc = umc_device_create(&card->pci->dev, n); + if (umc == NULL) + return -ENOMEM; + + capdata = le_readq(card->uwbbase + UWBCAPDATA(n)); + + bar = UWBCAPDATA_TO_BAR(capdata) << 1; + + capdata = whci_capdata_quirks(card, capdata); + /* Capability 0 is the radio controller. It's size is 32 + * bytes (WHCI0.95[2.3, T2-9]). */ + umc->version = UWBCAPDATA_TO_VERSION(capdata); + umc->cap_id = n == 0 ? 0 : UWBCAPDATA_TO_CAP_ID(capdata); + umc->bar = bar; + umc->resource.start = pci_resource_start(card->pci, bar) + + UWBCAPDATA_TO_OFFSET(capdata); + umc->resource.end = umc->resource.start + + (n == 0 ? 0x20 : UWBCAPDATA_TO_SIZE(capdata)) - 1; + umc->resource.name = umc->dev.bus_id; + umc->resource.flags = card->pci->resource[bar].flags; + umc->resource.parent = &card->pci->resource[bar]; + umc->irq = card->pci->irq; + + err = umc_device_register(umc); + if (err < 0) + goto error; + card->devs[n] = umc; + return 0; + +error: + kfree(umc); + return err; +} + +static void whci_del_cap(struct whci_card *card, int n) +{ + struct umc_dev *umc = card->devs[n]; + + if (umc != NULL) + umc_device_unregister(umc); +} + +static int whci_n_caps(struct pci_dev *pci) +{ + void __iomem *uwbbase; + u64 capinfo; + + uwbbase = pci_iomap(pci, 0, 8); + if (!uwbbase) + return -ENOMEM; + capinfo = le_readq(uwbbase + UWBCAPINFO); + pci_iounmap(pci, uwbbase); + + return UWBCAPINFO_TO_N_CAPS(capinfo); +} + +static int whci_probe(struct pci_dev *pci, const struct pci_device_id *id) +{ + struct whci_card *card; + int err, n_caps, n; + + err = pci_enable_device(pci); + if (err < 0) + goto error; + pci_enable_msi(pci); + pci_set_master(pci); + err = -ENXIO; + if (!pci_set_dma_mask(pci, DMA_64BIT_MASK)) + pci_set_consistent_dma_mask(pci, DMA_64BIT_MASK); + else if (!pci_set_dma_mask(pci, DMA_32BIT_MASK)) + pci_set_consistent_dma_mask(pci, DMA_32BIT_MASK); + else + goto error_dma; + + err = n_caps = whci_n_caps(pci); + if (n_caps < 0) + goto error_ncaps; + + err = -ENOMEM; + card = kzalloc(sizeof(struct whci_card) + + sizeof(struct whci_dev *) * (n_caps + 1), + GFP_KERNEL); + if (card == NULL) + goto error_kzalloc; + card->pci = pci; + card->n_caps = n_caps; + + err = -EBUSY; + if (!request_mem_region(pci_resource_start(pci, 0), + UWBCAPDATA_SIZE(card->n_caps), + "whci (capability data)")) + goto error_request_memregion; + err = -ENOMEM; + card->uwbbase = pci_iomap(pci, 0, UWBCAPDATA_SIZE(card->n_caps)); + if (!card->uwbbase) + goto error_iomap; + + /* Add each capability. */ + for (n = 0; n <= card->n_caps; n++) { + err = whci_add_cap(card, n); + if (err < 0 && n == 0) { + dev_err(&pci->dev, "cannot bind UWB radio controller:" + " %d\n", err); + goto error_bind; + } + if (err < 0) + dev_warn(&pci->dev, "warning: cannot bind capability " + "#%u: %d\n", n, err); + } + pci_set_drvdata(pci, card); + return 0; + +error_bind: + pci_iounmap(pci, card->uwbbase); +error_iomap: + release_mem_region(pci_resource_start(pci, 0), UWBCAPDATA_SIZE(card->n_caps)); +error_request_memregion: + kfree(card); +error_kzalloc: +error_ncaps: +error_dma: + pci_disable_msi(pci); + pci_disable_device(pci); +error: + return err; +} + +static void whci_remove(struct pci_dev *pci) +{ + struct whci_card *card = pci_get_drvdata(pci); + int n; + + pci_set_drvdata(pci, NULL); + /* Unregister each capability in reverse (so the master device + * is unregistered last). */ + for (n = card->n_caps; n >= 0 ; n--) + whci_del_cap(card, n); + pci_iounmap(pci, card->uwbbase); + release_mem_region(pci_resource_start(pci, 0), UWBCAPDATA_SIZE(card->n_caps)); + kfree(card); + pci_disable_msi(pci); + pci_disable_device(pci); +} + +static struct pci_device_id whci_id_table[] = { + { PCI_DEVICE_CLASS(PCI_CLASS_WIRELESS_WHCI, ~0) }, + { 0 }, +}; +MODULE_DEVICE_TABLE(pci, whci_id_table); + + +static struct pci_driver whci_driver = { + .name = "whci", + .id_table = whci_id_table, + .probe = whci_probe, + .remove = whci_remove, +}; + +static int __init whci_init(void) +{ + return pci_register_driver(&whci_driver); +} + +static void __exit whci_exit(void) +{ + pci_unregister_driver(&whci_driver); +} + +module_init(whci_init); +module_exit(whci_exit); + +MODULE_DESCRIPTION("WHCI UWB Multi-interface Controller enumerator"); +MODULE_AUTHOR("Cambridge Silicon Radio Ltd."); +MODULE_LICENSE("GPL"); diff --git a/drivers/uwb/wlp/Makefile b/drivers/uwb/wlp/Makefile new file mode 100644 index 000000000000..c72c11db5b1b --- /dev/null +++ b/drivers/uwb/wlp/Makefile @@ -0,0 +1,10 @@ +obj-$(CONFIG_UWB_WLP) := wlp.o + +wlp-objs := \ + driver.o \ + eda.o \ + messages.o \ + sysfs.o \ + txrx.o \ + wlp-lc.o \ + wss-lc.o diff --git a/drivers/uwb/wlp/driver.c b/drivers/uwb/wlp/driver.c new file mode 100644 index 000000000000..cb8d699b6a67 --- /dev/null +++ b/drivers/uwb/wlp/driver.c @@ -0,0 +1,43 @@ +/* + * WiMedia Logical Link Control Protocol (WLP) + * + * Copyright (C) 2007 Intel Corporation + * Reinette Chatre <reinette.chatre@intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + * + * + * Life cycle of WLP substack + * + * FIXME: Docs + */ + +#include <linux/module.h> + +static int __init wlp_subsys_init(void) +{ + return 0; +} +module_init(wlp_subsys_init); + +static void __exit wlp_subsys_exit(void) +{ + return; +} +module_exit(wlp_subsys_exit); + +MODULE_AUTHOR("Reinette Chatre <reinette.chatre@intel.com>"); +MODULE_DESCRIPTION("WiMedia Logical Link Control Protocol (WLP)"); +MODULE_LICENSE("GPL"); diff --git a/drivers/uwb/wlp/eda.c b/drivers/uwb/wlp/eda.c new file mode 100644 index 000000000000..cdfe8dfc4340 --- /dev/null +++ b/drivers/uwb/wlp/eda.c @@ -0,0 +1,449 @@ +/* + * WUSB Wire Adapter: WLP interface + * Ethernet to device address cache + * + * Copyright (C) 2005-2006 Intel Corporation + * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + * + * + * We need to be able to map ethernet addresses to device addresses + * and back because there is not explicit relationship between the eth + * addresses used in the ETH frames and the device addresses (no, it + * would not have been simpler to force as ETH address the MBOA MAC + * address...no, not at all :). + * + * A device has one MBOA MAC address and one device address. It is possible + * for a device to have more than one virtual MAC address (although a + * virtual address can be the same as the MBOA MAC address). The device + * address is guaranteed to be unique among the devices in the extended + * beacon group (see ECMA 17.1.1). We thus use the device address as index + * to this cache. We do allow searching based on virtual address as this + * is how Ethernet frames will be addressed. + * + * We need to support virtual EUI-48. Although, right now the virtual + * EUI-48 will always be the same as the MAC SAP address. The EDA cache + * entry thus contains a MAC SAP address as well as the virtual address + * (used to map the network stack address to a neighbor). When we move + * to support more than one virtual MAC on a host then this organization + * will have to change. Perhaps a neighbor has a list of WSSs, each with a + * tag and virtual EUI-48. + * + * On data transmission + * it is used to determine if the neighbor is connected and what WSS it + * belongs to. With this we know what tag to add to the WLP frame. Storing + * the WSS in the EDA cache may be overkill because we only support one + * WSS. Hopefully we will support more than one WSS at some point. + * On data reception it is used to determine the WSS based on + * the tag and address of the transmitting neighbor. + */ + +#define D_LOCAL 5 +#include <linux/netdevice.h> +#include <linux/uwb/debug.h> +#include <linux/etherdevice.h> +#include <linux/wlp.h> +#include "wlp-internal.h" + + +/* FIXME: cache is not purged, only on device close */ + +/* FIXME: does not scale, change to dynamic array */ + +/* + * Initialize the EDA cache + * + * @returns 0 if ok, < 0 errno code on error + * + * Call when the interface is being brought up + * + * NOTE: Keep it as a separate function as the implementation will + * change and be more complex. + */ +void wlp_eda_init(struct wlp_eda *eda) +{ + INIT_LIST_HEAD(&eda->cache); + spin_lock_init(&eda->lock); +} + +/* + * Release the EDA cache + * + * @returns 0 if ok, < 0 errno code on error + * + * Called when the interface is brought down + */ +void wlp_eda_release(struct wlp_eda *eda) +{ + unsigned long flags; + struct wlp_eda_node *itr, *next; + + spin_lock_irqsave(&eda->lock, flags); + list_for_each_entry_safe(itr, next, &eda->cache, list_node) { + list_del(&itr->list_node); + kfree(itr); + } + spin_unlock_irqrestore(&eda->lock, flags); +} + +/* + * Add an address mapping + * + * @returns 0 if ok, < 0 errno code on error + * + * An address mapping is initially created when the neighbor device is seen + * for the first time (it is "onair"). At this time the neighbor is not + * connected or associated with a WSS so we only populate the Ethernet and + * Device address fields. + * + */ +int wlp_eda_create_node(struct wlp_eda *eda, + const unsigned char eth_addr[ETH_ALEN], + const struct uwb_dev_addr *dev_addr) +{ + int result = 0; + struct wlp_eda_node *itr; + unsigned long flags; + + BUG_ON(dev_addr == NULL || eth_addr == NULL); + spin_lock_irqsave(&eda->lock, flags); + list_for_each_entry(itr, &eda->cache, list_node) { + if (!memcmp(&itr->dev_addr, dev_addr, sizeof(itr->dev_addr))) { + printk(KERN_ERR "EDA cache already contains entry " + "for neighbor %02x:%02x\n", + dev_addr->data[1], dev_addr->data[0]); + result = -EEXIST; + goto out_unlock; + } + } + itr = kzalloc(sizeof(*itr), GFP_ATOMIC); + if (itr != NULL) { + memcpy(itr->eth_addr, eth_addr, sizeof(itr->eth_addr)); + itr->dev_addr = *dev_addr; + list_add(&itr->list_node, &eda->cache); + } else + result = -ENOMEM; +out_unlock: + spin_unlock_irqrestore(&eda->lock, flags); + return result; +} + +/* + * Remove entry from EDA cache + * + * This is done when the device goes off air. + */ +void wlp_eda_rm_node(struct wlp_eda *eda, const struct uwb_dev_addr *dev_addr) +{ + struct wlp_eda_node *itr, *next; + unsigned long flags; + + spin_lock_irqsave(&eda->lock, flags); + list_for_each_entry_safe(itr, next, &eda->cache, list_node) { + if (!memcmp(&itr->dev_addr, dev_addr, sizeof(itr->dev_addr))) { + list_del(&itr->list_node); + kfree(itr); + break; + } + } + spin_unlock_irqrestore(&eda->lock, flags); +} + +/* + * Update an address mapping + * + * @returns 0 if ok, < 0 errno code on error + */ +int wlp_eda_update_node(struct wlp_eda *eda, + const struct uwb_dev_addr *dev_addr, + struct wlp_wss *wss, + const unsigned char virt_addr[ETH_ALEN], + const u8 tag, const enum wlp_wss_connect state) +{ + int result = -ENOENT; + struct wlp_eda_node *itr; + unsigned long flags; + + spin_lock_irqsave(&eda->lock, flags); + list_for_each_entry(itr, &eda->cache, list_node) { + if (!memcmp(&itr->dev_addr, dev_addr, sizeof(itr->dev_addr))) { + /* Found it, update it */ + itr->wss = wss; + memcpy(itr->virt_addr, virt_addr, + sizeof(itr->virt_addr)); + itr->tag = tag; + itr->state = state; + result = 0; + goto out_unlock; + } + } + /* Not found */ +out_unlock: + spin_unlock_irqrestore(&eda->lock, flags); + return result; +} + +/* + * Update only state field of an address mapping + * + * @returns 0 if ok, < 0 errno code on error + */ +int wlp_eda_update_node_state(struct wlp_eda *eda, + const struct uwb_dev_addr *dev_addr, + const enum wlp_wss_connect state) +{ + int result = -ENOENT; + struct wlp_eda_node *itr; + unsigned long flags; + + spin_lock_irqsave(&eda->lock, flags); + list_for_each_entry(itr, &eda->cache, list_node) { + if (!memcmp(&itr->dev_addr, dev_addr, sizeof(itr->dev_addr))) { + /* Found it, update it */ + itr->state = state; + result = 0; + goto out_unlock; + } + } + /* Not found */ +out_unlock: + spin_unlock_irqrestore(&eda->lock, flags); + return result; +} + +/* + * Return contents of EDA cache entry + * + * @dev_addr: index to EDA cache + * @eda_entry: pointer to where contents of EDA cache will be copied + */ +int wlp_copy_eda_node(struct wlp_eda *eda, struct uwb_dev_addr *dev_addr, + struct wlp_eda_node *eda_entry) +{ + int result = -ENOENT; + struct wlp_eda_node *itr; + unsigned long flags; + + spin_lock_irqsave(&eda->lock, flags); + list_for_each_entry(itr, &eda->cache, list_node) { + if (!memcmp(&itr->dev_addr, dev_addr, sizeof(itr->dev_addr))) { + *eda_entry = *itr; + result = 0; + goto out_unlock; + } + } + /* Not found */ +out_unlock: + spin_unlock_irqrestore(&eda->lock, flags); + return result; +} + +/* + * Execute function for every element in the cache + * + * @function: function to execute on element of cache (must be atomic) + * @priv: private data of function + * @returns: result of first function that failed, or last function + * executed if no function failed. + * + * Stop executing when function returns error for any element in cache. + * + * IMPORTANT: We are using a spinlock here: the function executed on each + * element has to be atomic. + */ +int wlp_eda_for_each(struct wlp_eda *eda, wlp_eda_for_each_f function, + void *priv) +{ + int result = 0; + struct wlp *wlp = container_of(eda, struct wlp, eda); + struct wlp_eda_node *entry; + unsigned long flags; + + spin_lock_irqsave(&eda->lock, flags); + list_for_each_entry(entry, &eda->cache, list_node) { + result = (*function)(wlp, entry, priv); + if (result < 0) + break; + } + spin_unlock_irqrestore(&eda->lock, flags); + return result; +} + +/* + * Execute function for single element in the cache (return dev addr) + * + * @virt_addr: index into EDA cache used to determine which element to + * execute the function on + * @dev_addr: device address of element in cache will be returned using + * @dev_addr + * @function: function to execute on element of cache (must be atomic) + * @priv: private data of function + * @returns: result of function + * + * IMPORTANT: We are using a spinlock here: the function executed on the + * element has to be atomic. + */ +int wlp_eda_for_virtual(struct wlp_eda *eda, + const unsigned char virt_addr[ETH_ALEN], + struct uwb_dev_addr *dev_addr, + wlp_eda_for_each_f function, + void *priv) +{ + int result = 0; + struct wlp *wlp = container_of(eda, struct wlp, eda); + struct device *dev = &wlp->rc->uwb_dev.dev; + struct wlp_eda_node *itr; + unsigned long flags; + int found = 0; + + spin_lock_irqsave(&eda->lock, flags); + list_for_each_entry(itr, &eda->cache, list_node) { + if (!memcmp(itr->virt_addr, virt_addr, + sizeof(itr->virt_addr))) { + d_printf(6, dev, "EDA: looking for " + "%02x:%02x:%02x:%02x:%02x:%02x hit %02x:%02x " + "wss %p tag 0x%02x state %u\n", + virt_addr[0], virt_addr[1], + virt_addr[2], virt_addr[3], + virt_addr[4], virt_addr[5], + itr->dev_addr.data[1], + itr->dev_addr.data[0], itr->wss, + itr->tag, itr->state); + result = (*function)(wlp, itr, priv); + *dev_addr = itr->dev_addr; + found = 1; + break; + } else + d_printf(6, dev, "EDA: looking for " + "%02x:%02x:%02x:%02x:%02x:%02x " + "against " + "%02x:%02x:%02x:%02x:%02x:%02x miss\n", + virt_addr[0], virt_addr[1], + virt_addr[2], virt_addr[3], + virt_addr[4], virt_addr[5], + itr->virt_addr[0], itr->virt_addr[1], + itr->virt_addr[2], itr->virt_addr[3], + itr->virt_addr[4], itr->virt_addr[5]); + } + if (!found) { + if (printk_ratelimit()) + dev_err(dev, "EDA: Eth addr %02x:%02x:%02x" + ":%02x:%02x:%02x not found.\n", + virt_addr[0], virt_addr[1], + virt_addr[2], virt_addr[3], + virt_addr[4], virt_addr[5]); + result = -ENODEV; + } + spin_unlock_irqrestore(&eda->lock, flags); + return result; +} + +static const char *__wlp_wss_connect_state[] = { "WLP_WSS_UNCONNECTED", + "WLP_WSS_CONNECTED", + "WLP_WSS_CONNECT_FAILED", +}; + +static const char *wlp_wss_connect_state_str(unsigned id) +{ + if (id >= ARRAY_SIZE(__wlp_wss_connect_state)) + return "unknown WSS connection state"; + return __wlp_wss_connect_state[id]; +} + +/* + * View EDA cache from user space + * + * A debugging feature to give user visibility into the EDA cache. Also + * used to display members of WSS to user (called from wlp_wss_members_show()) + */ +ssize_t wlp_eda_show(struct wlp *wlp, char *buf) +{ + ssize_t result = 0; + struct wlp_eda_node *entry; + unsigned long flags; + struct wlp_eda *eda = &wlp->eda; + spin_lock_irqsave(&eda->lock, flags); + result = scnprintf(buf, PAGE_SIZE, "#eth_addr dev_addr wss_ptr " + "tag state virt_addr\n"); + list_for_each_entry(entry, &eda->cache, list_node) { + result += scnprintf(buf + result, PAGE_SIZE - result, + "%02x:%02x:%02x:%02x:%02x:%02x %02x:%02x " + "%p 0x%02x %s " + "%02x:%02x:%02x:%02x:%02x:%02x\n", + entry->eth_addr[0], entry->eth_addr[1], + entry->eth_addr[2], entry->eth_addr[3], + entry->eth_addr[4], entry->eth_addr[5], + entry->dev_addr.data[1], + entry->dev_addr.data[0], entry->wss, + entry->tag, + wlp_wss_connect_state_str(entry->state), + entry->virt_addr[0], entry->virt_addr[1], + entry->virt_addr[2], entry->virt_addr[3], + entry->virt_addr[4], entry->virt_addr[5]); + if (result >= PAGE_SIZE) + break; + } + spin_unlock_irqrestore(&eda->lock, flags); + return result; +} +EXPORT_SYMBOL_GPL(wlp_eda_show); + +/* + * Add new EDA cache entry based on user input in sysfs + * + * Should only be used for debugging. + * + * The WSS is assumed to be the only WSS supported. This needs to be + * redesigned when we support more than one WSS. + */ +ssize_t wlp_eda_store(struct wlp *wlp, const char *buf, size_t size) +{ + ssize_t result; + struct wlp_eda *eda = &wlp->eda; + u8 eth_addr[6]; + struct uwb_dev_addr dev_addr; + u8 tag; + unsigned state; + + result = sscanf(buf, "%02hhx:%02hhx:%02hhx:%02hhx:%02hhx:%02hhx " + "%02hhx:%02hhx %02hhx %u\n", + ð_addr[0], ð_addr[1], + ð_addr[2], ð_addr[3], + ð_addr[4], ð_addr[5], + &dev_addr.data[1], &dev_addr.data[0], &tag, &state); + switch (result) { + case 6: /* no dev addr specified -- remove entry NOT IMPLEMENTED */ + /*result = wlp_eda_rm(eda, eth_addr, &dev_addr);*/ + result = -ENOSYS; + break; + case 10: + state = state >= 1 ? 1 : 0; + result = wlp_eda_create_node(eda, eth_addr, &dev_addr); + if (result < 0 && result != -EEXIST) + goto error; + /* Set virtual addr to be same as MAC */ + result = wlp_eda_update_node(eda, &dev_addr, &wlp->wss, + eth_addr, tag, state); + if (result < 0) + goto error; + break; + default: /* bad format */ + result = -EINVAL; + } +error: + return result < 0 ? result : size; +} +EXPORT_SYMBOL_GPL(wlp_eda_store); diff --git a/drivers/uwb/wlp/messages.c b/drivers/uwb/wlp/messages.c new file mode 100644 index 000000000000..a64cb8241713 --- /dev/null +++ b/drivers/uwb/wlp/messages.c @@ -0,0 +1,1946 @@ +/* + * WiMedia Logical Link Control Protocol (WLP) + * Message construction and parsing + * + * Copyright (C) 2007 Intel Corporation + * Reinette Chatre <reinette.chatre@intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + * + * + * FIXME: docs + */ + +#include <linux/wlp.h> +#define D_LOCAL 6 +#include <linux/uwb/debug.h> +#include "wlp-internal.h" + +static +const char *__wlp_assoc_frame[] = { + [WLP_ASSOC_D1] = "WLP_ASSOC_D1", + [WLP_ASSOC_D2] = "WLP_ASSOC_D2", + [WLP_ASSOC_M1] = "WLP_ASSOC_M1", + [WLP_ASSOC_M2] = "WLP_ASSOC_M2", + [WLP_ASSOC_M3] = "WLP_ASSOC_M3", + [WLP_ASSOC_M4] = "WLP_ASSOC_M4", + [WLP_ASSOC_M5] = "WLP_ASSOC_M5", + [WLP_ASSOC_M6] = "WLP_ASSOC_M6", + [WLP_ASSOC_M7] = "WLP_ASSOC_M7", + [WLP_ASSOC_M8] = "WLP_ASSOC_M8", + [WLP_ASSOC_F0] = "WLP_ASSOC_F0", + [WLP_ASSOC_E1] = "WLP_ASSOC_E1", + [WLP_ASSOC_E2] = "WLP_ASSOC_E2", + [WLP_ASSOC_C1] = "WLP_ASSOC_C1", + [WLP_ASSOC_C2] = "WLP_ASSOC_C2", + [WLP_ASSOC_C3] = "WLP_ASSOC_C3", + [WLP_ASSOC_C4] = "WLP_ASSOC_C4", +}; + +static const char *wlp_assoc_frame_str(unsigned id) +{ + if (id >= ARRAY_SIZE(__wlp_assoc_frame)) + return "unknown association frame"; + return __wlp_assoc_frame[id]; +} + +static const char *__wlp_assc_error[] = { + "none", + "Authenticator Failure", + "Rogue activity suspected", + "Device busy", + "Setup Locked", + "Registrar not ready", + "Invalid WSS selection", + "Message timeout", + "Enrollment session timeout", + "Device password invalid", + "Unsupported version", + "Internal error", + "Undefined error", + "Numeric comparison failure", + "Waiting for user input", +}; + +static const char *wlp_assc_error_str(unsigned id) +{ + if (id >= ARRAY_SIZE(__wlp_assc_error)) + return "unknown WLP association error"; + return __wlp_assc_error[id]; +} + +static inline void wlp_set_attr_hdr(struct wlp_attr_hdr *hdr, unsigned type, + size_t len) +{ + hdr->type = cpu_to_le16(type); + hdr->length = cpu_to_le16(len); +} + +/* + * Populate fields of a constant sized attribute + * + * @returns: total size of attribute including size of new value + * + * We have two instances of this function (wlp_pset and wlp_set): one takes + * the value as a parameter, the other takes a pointer to the value as + * parameter. They thus only differ in how the value is assigned to the + * attribute. + * + * We use sizeof(*attr) - sizeof(struct wlp_attr_hdr) instead of + * sizeof(type) to be able to use this same code for the structures that + * contain 8bit enum values and be able to deal with pointer types. + */ +#define wlp_set(type, type_code, name) \ +static size_t wlp_set_##name(struct wlp_attr_##name *attr, type value) \ +{ \ + d_fnstart(6, NULL, "(attribute %p)\n", attr); \ + wlp_set_attr_hdr(&attr->hdr, type_code, \ + sizeof(*attr) - sizeof(struct wlp_attr_hdr)); \ + attr->name = value; \ + d_dump(6, NULL, attr, sizeof(*attr)); \ + d_fnend(6, NULL, "(attribute %p)\n", attr); \ + return sizeof(*attr); \ +} + +#define wlp_pset(type, type_code, name) \ +static size_t wlp_set_##name(struct wlp_attr_##name *attr, type value) \ +{ \ + d_fnstart(6, NULL, "(attribute %p)\n", attr); \ + wlp_set_attr_hdr(&attr->hdr, type_code, \ + sizeof(*attr) - sizeof(struct wlp_attr_hdr)); \ + attr->name = *value; \ + d_dump(6, NULL, attr, sizeof(*attr)); \ + d_fnend(6, NULL, "(attribute %p)\n", attr); \ + return sizeof(*attr); \ +} + +/** + * Populate fields of a variable attribute + * + * @returns: total size of attribute including size of new value + * + * Provided with a pointer to the memory area reserved for the + * attribute structure, the field is populated with the value. The + * reserved memory has to contain enough space for the value. + */ +#define wlp_vset(type, type_code, name) \ +static size_t wlp_set_##name(struct wlp_attr_##name *attr, type value, \ + size_t len) \ +{ \ + d_fnstart(6, NULL, "(attribute %p)\n", attr); \ + wlp_set_attr_hdr(&attr->hdr, type_code, len); \ + memcpy(attr->name, value, len); \ + d_dump(6, NULL, attr, sizeof(*attr) + len); \ + d_fnend(6, NULL, "(attribute %p)\n", attr); \ + return sizeof(*attr) + len; \ +} + +wlp_vset(char *, WLP_ATTR_DEV_NAME, dev_name) +wlp_vset(char *, WLP_ATTR_MANUF, manufacturer) +wlp_set(enum wlp_assoc_type, WLP_ATTR_MSG_TYPE, msg_type) +wlp_vset(char *, WLP_ATTR_MODEL_NAME, model_name) +wlp_vset(char *, WLP_ATTR_MODEL_NR, model_nr) +wlp_vset(char *, WLP_ATTR_SERIAL, serial) +wlp_vset(char *, WLP_ATTR_WSS_NAME, wss_name) +wlp_pset(struct wlp_uuid *, WLP_ATTR_UUID_E, uuid_e) +wlp_pset(struct wlp_uuid *, WLP_ATTR_UUID_R, uuid_r) +wlp_pset(struct wlp_uuid *, WLP_ATTR_WSSID, wssid) +wlp_pset(struct wlp_dev_type *, WLP_ATTR_PRI_DEV_TYPE, prim_dev_type) +/*wlp_pset(struct wlp_dev_type *, WLP_ATTR_SEC_DEV_TYPE, sec_dev_type)*/ +wlp_set(u8, WLP_ATTR_WLP_VER, version) +wlp_set(enum wlp_assc_error, WLP_ATTR_WLP_ASSC_ERR, wlp_assc_err) +wlp_set(enum wlp_wss_sel_mthd, WLP_ATTR_WSS_SEL_MTHD, wss_sel_mthd) +wlp_set(u8, WLP_ATTR_ACC_ENRL, accept_enrl) +wlp_set(u8, WLP_ATTR_WSS_SEC_STAT, wss_sec_status) +wlp_pset(struct uwb_mac_addr *, WLP_ATTR_WSS_BCAST, wss_bcast) +wlp_pset(struct wlp_nonce *, WLP_ATTR_ENRL_NONCE, enonce) +wlp_pset(struct wlp_nonce *, WLP_ATTR_REG_NONCE, rnonce) +wlp_set(u8, WLP_ATTR_WSS_TAG, wss_tag) +wlp_pset(struct uwb_mac_addr *, WLP_ATTR_WSS_VIRT, wss_virt) + +/** + * Fill in the WSS information attributes + * + * We currently only support one WSS, and this is assumed in this function + * that can populate only one WSS information attribute. + */ +static size_t wlp_set_wss_info(struct wlp_attr_wss_info *attr, + struct wlp_wss *wss) +{ + size_t datalen; + void *ptr = attr->wss_info; + size_t used = sizeof(*attr); + d_fnstart(6, NULL, "(attribute %p)\n", attr); + datalen = sizeof(struct wlp_wss_info) + strlen(wss->name); + wlp_set_attr_hdr(&attr->hdr, WLP_ATTR_WSS_INFO, datalen); + used = wlp_set_wssid(ptr, &wss->wssid); + used += wlp_set_wss_name(ptr + used, wss->name, strlen(wss->name)); + used += wlp_set_accept_enrl(ptr + used, wss->accept_enroll); + used += wlp_set_wss_sec_status(ptr + used, wss->secure_status); + used += wlp_set_wss_bcast(ptr + used, &wss->bcast); + d_dump(6, NULL, attr, sizeof(*attr) + datalen); + d_fnend(6, NULL, "(attribute %p, used %d)\n", + attr, (int)(sizeof(*attr) + used)); + return sizeof(*attr) + used; +} + +/** + * Verify attribute header + * + * @hdr: Pointer to attribute header that will be verified. + * @type: Expected attribute type. + * @len: Expected length of attribute value (excluding header). + * + * Most attribute values have a known length even when they do have a + * length field. This knowledge can be used via this function to verify + * that the length field matches the expected value. + */ +static int wlp_check_attr_hdr(struct wlp *wlp, struct wlp_attr_hdr *hdr, + enum wlp_attr_type type, unsigned len) +{ + struct device *dev = &wlp->rc->uwb_dev.dev; + + if (le16_to_cpu(hdr->type) != type) { + dev_err(dev, "WLP: unexpected header type. Expected " + "%u, got %u.\n", type, le16_to_cpu(hdr->type)); + return -EINVAL; + } + if (le16_to_cpu(hdr->length) != len) { + dev_err(dev, "WLP: unexpected length in header. Expected " + "%u, got %u.\n", len, le16_to_cpu(hdr->length)); + return -EINVAL; + } + return 0; +} + +/** + * Check if header of WSS information attribute valid + * + * @returns: length of WSS attributes (value of length attribute field) if + * valid WSS information attribute found + * -ENODATA if no WSS information attribute found + * -EIO other error occured + * + * The WSS information attribute is optional. The function will be provided + * with a pointer to data that could _potentially_ be a WSS information + * attribute. If a valid WSS information attribute is found it will return + * 0, if no WSS information attribute is found it will return -ENODATA, and + * another error will be returned if it is a WSS information attribute, but + * some parsing failure occured. + */ +static int wlp_check_wss_info_attr_hdr(struct wlp *wlp, + struct wlp_attr_hdr *hdr, size_t buflen) +{ + struct device *dev = &wlp->rc->uwb_dev.dev; + size_t len; + int result = 0; + + if (buflen < sizeof(*hdr)) { + dev_err(dev, "WLP: Not enough space in buffer to parse" + " WSS information attribute header.\n"); + result = -EIO; + goto out; + } + if (le16_to_cpu(hdr->type) != WLP_ATTR_WSS_INFO) { + /* WSS information is optional */ + result = -ENODATA; + goto out; + } + len = le16_to_cpu(hdr->length); + if (buflen < sizeof(*hdr) + len) { + dev_err(dev, "WLP: Not enough space in buffer to parse " + "variable data. Got %d, expected %d.\n", + (int)buflen, (int)(sizeof(*hdr) + len)); + result = -EIO; + goto out; + } + result = len; +out: + return result; +} + + +/** + * Get value of attribute from fixed size attribute field. + * + * @attr: Pointer to attribute field. + * @value: Pointer to variable in which attribute value will be placed. + * @buflen: Size of buffer in which attribute field (including header) + * can be found. + * @returns: Amount of given buffer consumed by parsing for this attribute. + * + * The size and type of the value is known by the type of the attribute. + */ +#define wlp_get(type, type_code, name) \ +ssize_t wlp_get_##name(struct wlp *wlp, struct wlp_attr_##name *attr, \ + type *value, ssize_t buflen) \ +{ \ + struct device *dev = &wlp->rc->uwb_dev.dev; \ + if (buflen < 0) \ + return -EINVAL; \ + if (buflen < sizeof(*attr)) { \ + dev_err(dev, "WLP: Not enough space in buffer to parse" \ + " attribute field. Need %d, received %zu\n", \ + (int)sizeof(*attr), buflen); \ + return -EIO; \ + } \ + if (wlp_check_attr_hdr(wlp, &attr->hdr, type_code, \ + sizeof(attr->name)) < 0) { \ + dev_err(dev, "WLP: Header verification failed. \n"); \ + return -EINVAL; \ + } \ + *value = attr->name; \ + return sizeof(*attr); \ +} + +#define wlp_get_sparse(type, type_code, name) \ + static wlp_get(type, type_code, name) + +/** + * Get value of attribute from variable sized attribute field. + * + * @max: The maximum size of this attribute. This value is dictated by + * the maximum value from the WLP specification. + * + * @attr: Pointer to attribute field. + * @value: Pointer to variable that will contain the value. The memory + * must already have been allocated for this value. + * @buflen: Size of buffer in which attribute field (including header) + * can be found. + * @returns: Amount of given bufferconsumed by parsing for this attribute. + */ +#define wlp_vget(type_val, type_code, name, max) \ +static ssize_t wlp_get_##name(struct wlp *wlp, \ + struct wlp_attr_##name *attr, \ + type_val *value, ssize_t buflen) \ +{ \ + struct device *dev = &wlp->rc->uwb_dev.dev; \ + size_t len; \ + if (buflen < 0) \ + return -EINVAL; \ + if (buflen < sizeof(*attr)) { \ + dev_err(dev, "WLP: Not enough space in buffer to parse" \ + " header.\n"); \ + return -EIO; \ + } \ + if (le16_to_cpu(attr->hdr.type) != type_code) { \ + dev_err(dev, "WLP: Unexpected attribute type. Got %u, " \ + "expected %u.\n", le16_to_cpu(attr->hdr.type), \ + type_code); \ + return -EINVAL; \ + } \ + len = le16_to_cpu(attr->hdr.length); \ + if (len > max) { \ + dev_err(dev, "WLP: Attribute larger than maximum " \ + "allowed. Received %zu, max is %d.\n", len, \ + (int)max); \ + return -EFBIG; \ + } \ + if (buflen < sizeof(*attr) + len) { \ + dev_err(dev, "WLP: Not enough space in buffer to parse "\ + "variable data.\n"); \ + return -EIO; \ + } \ + memcpy(value, (void *) attr + sizeof(*attr), len); \ + return sizeof(*attr) + len; \ +} + +wlp_get(u8, WLP_ATTR_WLP_VER, version) +wlp_get_sparse(enum wlp_wss_sel_mthd, WLP_ATTR_WSS_SEL_MTHD, wss_sel_mthd) +wlp_get_sparse(struct wlp_dev_type, WLP_ATTR_PRI_DEV_TYPE, prim_dev_type) +wlp_get_sparse(enum wlp_assc_error, WLP_ATTR_WLP_ASSC_ERR, wlp_assc_err) +wlp_get_sparse(struct wlp_uuid, WLP_ATTR_UUID_E, uuid_e) +wlp_get_sparse(struct wlp_uuid, WLP_ATTR_UUID_R, uuid_r) +wlp_get(struct wlp_uuid, WLP_ATTR_WSSID, wssid) +wlp_get_sparse(u8, WLP_ATTR_ACC_ENRL, accept_enrl) +wlp_get_sparse(u8, WLP_ATTR_WSS_SEC_STAT, wss_sec_status) +wlp_get_sparse(struct uwb_mac_addr, WLP_ATTR_WSS_BCAST, wss_bcast) +wlp_get_sparse(u8, WLP_ATTR_WSS_TAG, wss_tag) +wlp_get_sparse(struct uwb_mac_addr, WLP_ATTR_WSS_VIRT, wss_virt) +wlp_get_sparse(struct wlp_nonce, WLP_ATTR_ENRL_NONCE, enonce) +wlp_get_sparse(struct wlp_nonce, WLP_ATTR_REG_NONCE, rnonce) + +/* The buffers for the device info attributes can be found in the + * wlp_device_info struct. These buffers contain one byte more than the + * max allowed by the spec - this is done to be able to add the + * terminating \0 for user display. This terminating byte is not required + * in the actual attribute field (because it has a length field) so the + * maximum allowed for this value is one less than its size in the + * structure. + */ +wlp_vget(char, WLP_ATTR_WSS_NAME, wss_name, + FIELD_SIZEOF(struct wlp_wss, name) - 1) +wlp_vget(char, WLP_ATTR_DEV_NAME, dev_name, + FIELD_SIZEOF(struct wlp_device_info, name) - 1) +wlp_vget(char, WLP_ATTR_MANUF, manufacturer, + FIELD_SIZEOF(struct wlp_device_info, manufacturer) - 1) +wlp_vget(char, WLP_ATTR_MODEL_NAME, model_name, + FIELD_SIZEOF(struct wlp_device_info, model_name) - 1) +wlp_vget(char, WLP_ATTR_MODEL_NR, model_nr, + FIELD_SIZEOF(struct wlp_device_info, model_nr) - 1) +wlp_vget(char, WLP_ATTR_SERIAL, serial, + FIELD_SIZEOF(struct wlp_device_info, serial) - 1) + +/** + * Retrieve WSS Name, Accept enroll, Secure status, Broadcast from WSS info + * + * @attr: pointer to WSS name attribute in WSS information attribute field + * @info: structure that will be populated with data from WSS information + * field (WSS name, Accept enroll, secure status, broadcast address) + * @buflen: size of buffer + * + * Although the WSSID attribute forms part of the WSS info attribute it is + * retrieved separately and stored in a different location. + */ +static ssize_t wlp_get_wss_info_attrs(struct wlp *wlp, + struct wlp_attr_hdr *attr, + struct wlp_wss_tmp_info *info, + ssize_t buflen) +{ + struct device *dev = &wlp->rc->uwb_dev.dev; + void *ptr = attr; + size_t used = 0; + ssize_t result = -EINVAL; + + d_printf(6, dev, "WLP: WSS info: Retrieving WSS name\n"); + result = wlp_get_wss_name(wlp, ptr, info->name, buflen); + if (result < 0) { + dev_err(dev, "WLP: unable to obtain WSS name from " + "WSS info in D2 message.\n"); + goto error_parse; + } + used += result; + d_printf(6, dev, "WLP: WSS info: Retrieving accept enroll\n"); + result = wlp_get_accept_enrl(wlp, ptr + used, &info->accept_enroll, + buflen - used); + if (result < 0) { + dev_err(dev, "WLP: unable to obtain accepting " + "enrollment from WSS info in D2 message.\n"); + goto error_parse; + } + if (info->accept_enroll != 0 && info->accept_enroll != 1) { + dev_err(dev, "WLP: invalid value for accepting " + "enrollment in D2 message.\n"); + result = -EINVAL; + goto error_parse; + } + used += result; + d_printf(6, dev, "WLP: WSS info: Retrieving secure status\n"); + result = wlp_get_wss_sec_status(wlp, ptr + used, &info->sec_status, + buflen - used); + if (result < 0) { + dev_err(dev, "WLP: unable to obtain secure " + "status from WSS info in D2 message.\n"); + goto error_parse; + } + if (info->sec_status != 0 && info->sec_status != 1) { + dev_err(dev, "WLP: invalid value for secure " + "status in D2 message.\n"); + result = -EINVAL; + goto error_parse; + } + used += result; + d_printf(6, dev, "WLP: WSS info: Retrieving broadcast\n"); + result = wlp_get_wss_bcast(wlp, ptr + used, &info->bcast, + buflen - used); + if (result < 0) { + dev_err(dev, "WLP: unable to obtain broadcast " + "address from WSS info in D2 message.\n"); + goto error_parse; + } + used += result; + result = used; +error_parse: + return result; +} + +/** + * Create a new WSSID entry for the neighbor, allocate temporary storage + * + * Each neighbor can have many WSS active. We maintain a list of WSSIDs + * advertised by neighbor. During discovery we also cache information about + * these WSS in temporary storage. + * + * The temporary storage will be removed after it has been used (eg. + * displayed to user), the wssid element will be removed from the list when + * the neighbor is rediscovered or when it disappears. + */ +static struct wlp_wssid_e *wlp_create_wssid_e(struct wlp *wlp, + struct wlp_neighbor_e *neighbor) +{ + struct device *dev = &wlp->rc->uwb_dev.dev; + struct wlp_wssid_e *wssid_e; + + wssid_e = kzalloc(sizeof(*wssid_e), GFP_KERNEL); + if (wssid_e == NULL) { + dev_err(dev, "WLP: unable to allocate memory " + "for WSS information.\n"); + goto error_alloc; + } + wssid_e->info = kzalloc(sizeof(struct wlp_wss_tmp_info), GFP_KERNEL); + if (wssid_e->info == NULL) { + dev_err(dev, "WLP: unable to allocate memory " + "for temporary WSS information.\n"); + kfree(wssid_e); + wssid_e = NULL; + goto error_alloc; + } + list_add(&wssid_e->node, &neighbor->wssid); +error_alloc: + return wssid_e; +} + +/** + * Parse WSS information attribute + * + * @attr: pointer to WSS information attribute header + * @buflen: size of buffer in which WSS information attribute appears + * @wssid: will place wssid from WSS info attribute in this location + * @wss_info: will place other information from WSS information attribute + * in this location + * + * memory for @wssid and @wss_info must be allocated when calling this + */ +static ssize_t wlp_get_wss_info(struct wlp *wlp, struct wlp_attr_wss_info *attr, + size_t buflen, struct wlp_uuid *wssid, + struct wlp_wss_tmp_info *wss_info) +{ + struct device *dev = &wlp->rc->uwb_dev.dev; + ssize_t result; + size_t len; + size_t used = 0; + void *ptr; + + result = wlp_check_wss_info_attr_hdr(wlp, (struct wlp_attr_hdr *)attr, + buflen); + if (result < 0) + goto out; + len = result; + used = sizeof(*attr); + ptr = attr; + d_printf(6, dev, "WLP: WSS info: Retrieving WSSID\n"); + result = wlp_get_wssid(wlp, ptr + used, wssid, buflen - used); + if (result < 0) { + dev_err(dev, "WLP: unable to obtain WSSID from WSS info.\n"); + goto out; + } + used += result; + result = wlp_get_wss_info_attrs(wlp, ptr + used, wss_info, + buflen - used); + if (result < 0) { + dev_err(dev, "WLP: unable to obtain WSS information " + "from WSS information attributes. \n"); + goto out; + } + used += result; + if (len + sizeof(*attr) != used) { + dev_err(dev, "WLP: Amount of data parsed does not " + "match length field. Parsed %zu, length " + "field %zu. \n", used, len); + result = -EINVAL; + goto out; + } + result = used; + d_printf(6, dev, "WLP: Successfully parsed WLP information " + "attribute. used %zu bytes\n", used); +out: + return result; +} + +/** + * Retrieve WSS info from association frame + * + * @attr: pointer to WSS information attribute + * @neighbor: ptr to neighbor being discovered, NULL if enrollment in + * progress + * @wss: ptr to WSS being enrolled in, NULL if discovery in progress + * @buflen: size of buffer in which WSS information appears + * + * The WSS information attribute appears in the D2 association message. + * This message is used in two ways: to discover all neighbors or to enroll + * into a WSS activated by a neighbor. During discovery we only want to + * store the WSS info in a cache, to be deleted right after it has been + * used (eg. displayed to the user). During enrollment we store the WSS + * information for the lifetime of enrollment. + * + * During discovery we are interested in all WSS information, during + * enrollment we are only interested in the WSS being enrolled in. Even so, + * when in enrollment we keep parsing the message after finding the WSS of + * interest, this simplifies the calling routine in that it can be sure + * that all WSS information attributes have been parsed out of the message. + * + * Association frame is process with nbmutex held. The list access is safe. + */ +static ssize_t wlp_get_all_wss_info(struct wlp *wlp, + struct wlp_attr_wss_info *attr, + struct wlp_neighbor_e *neighbor, + struct wlp_wss *wss, ssize_t buflen) +{ + struct device *dev = &wlp->rc->uwb_dev.dev; + size_t used = 0; + ssize_t result = -EINVAL; + struct wlp_attr_wss_info *cur; + struct wlp_uuid wssid; + struct wlp_wss_tmp_info wss_info; + unsigned enroll; /* 0 - discovery to cache, 1 - enrollment */ + struct wlp_wssid_e *wssid_e; + char buf[WLP_WSS_UUID_STRSIZE]; + + d_fnstart(6, dev, "wlp %p, attr %p, neighbor %p, wss %p, buflen %d \n", + wlp, attr, neighbor, wss, (int)buflen); + if (buflen < 0) + goto out; + + if (neighbor != NULL && wss == NULL) + enroll = 0; /* discovery */ + else if (wss != NULL && neighbor == NULL) + enroll = 1; /* enrollment */ + else + goto out; + + cur = attr; + while (buflen - used > 0) { + memset(&wss_info, 0, sizeof(wss_info)); + cur = (void *)cur + used; + result = wlp_get_wss_info(wlp, cur, buflen - used, &wssid, + &wss_info); + if (result == -ENODATA) { + result = used; + goto out; + } else if (result < 0) { + dev_err(dev, "WLP: Unable to parse WSS information " + "from WSS information attribute. \n"); + result = -EINVAL; + goto error_parse; + } + if (enroll && !memcmp(&wssid, &wss->wssid, sizeof(wssid))) { + if (wss_info.accept_enroll != 1) { + dev_err(dev, "WLP: Requested WSS does " + "not accept enrollment.\n"); + result = -EINVAL; + goto out; + } + memcpy(wss->name, wss_info.name, sizeof(wss->name)); + wss->bcast = wss_info.bcast; + wss->secure_status = wss_info.sec_status; + wss->accept_enroll = wss_info.accept_enroll; + wss->state = WLP_WSS_STATE_PART_ENROLLED; + wlp_wss_uuid_print(buf, sizeof(buf), &wssid); + d_printf(2, dev, "WLP: Found WSS %s. Enrolling.\n", + buf); + } else { + wssid_e = wlp_create_wssid_e(wlp, neighbor); + if (wssid_e == NULL) { + dev_err(dev, "WLP: Cannot create new WSSID " + "entry for neighbor %02x:%02x.\n", + neighbor->uwb_dev->dev_addr.data[1], + neighbor->uwb_dev->dev_addr.data[0]); + result = -ENOMEM; + goto out; + } + wssid_e->wssid = wssid; + *wssid_e->info = wss_info; + } + used += result; + } + result = used; +error_parse: + if (result < 0 && !enroll) /* this was a discovery */ + wlp_remove_neighbor_tmp_info(neighbor); +out: + d_fnend(6, dev, "wlp %p, attr %p, neighbor %p, wss %p, buflen %d, " + "result %d \n", wlp, attr, neighbor, wss, (int)buflen, + (int)result); + return result; + +} + +/** + * Parse WSS information attributes into cache for discovery + * + * @attr: the first WSS information attribute in message + * @neighbor: the neighbor whose cache will be populated + * @buflen: size of the input buffer + */ +static ssize_t wlp_get_wss_info_to_cache(struct wlp *wlp, + struct wlp_attr_wss_info *attr, + struct wlp_neighbor_e *neighbor, + ssize_t buflen) +{ + return wlp_get_all_wss_info(wlp, attr, neighbor, NULL, buflen); +} + +/** + * Parse WSS information attributes into WSS struct for enrollment + * + * @attr: the first WSS information attribute in message + * @wss: the WSS that will be enrolled + * @buflen: size of the input buffer + */ +static ssize_t wlp_get_wss_info_to_enroll(struct wlp *wlp, + struct wlp_attr_wss_info *attr, + struct wlp_wss *wss, ssize_t buflen) +{ + return wlp_get_all_wss_info(wlp, attr, NULL, wss, buflen); +} + +/** + * Construct a D1 association frame + * + * We use the radio control functions to determine the values of the device + * properties. These are of variable length and the total space needed is + * tallied first before we start constructing the message. The radio + * control functions return strings that are terminated with \0. This + * character should not be included in the message (there is a length field + * accompanying it in the attribute). + */ +static int wlp_build_assoc_d1(struct wlp *wlp, struct wlp_wss *wss, + struct sk_buff **skb) +{ + + struct device *dev = &wlp->rc->uwb_dev.dev; + int result = 0; + struct wlp_device_info *info; + size_t used = 0; + struct wlp_frame_assoc *_d1; + struct sk_buff *_skb; + void *d1_itr; + + d_fnstart(6, dev, "wlp %p\n", wlp); + if (wlp->dev_info == NULL) { + result = __wlp_setup_device_info(wlp); + if (result < 0) { + dev_err(dev, "WLP: Unable to setup device " + "information for D1 message.\n"); + goto error; + } + } + info = wlp->dev_info; + d_printf(6, dev, "Local properties:\n" + "Device name (%d bytes): %s\n" + "Model name (%d bytes): %s\n" + "Manufacturer (%d bytes): %s\n" + "Model number (%d bytes): %s\n" + "Serial number (%d bytes): %s\n" + "Primary device type: \n" + " Category: %d \n" + " OUI: %02x:%02x:%02x \n" + " OUI Subdivision: %u \n", + (int)strlen(info->name), info->name, + (int)strlen(info->model_name), info->model_name, + (int)strlen(info->manufacturer), info->manufacturer, + (int)strlen(info->model_nr), info->model_nr, + (int)strlen(info->serial), info->serial, + info->prim_dev_type.category, + info->prim_dev_type.OUI[0], info->prim_dev_type.OUI[1], + info->prim_dev_type.OUI[2], info->prim_dev_type.OUIsubdiv); + _skb = dev_alloc_skb(sizeof(*_d1) + + sizeof(struct wlp_attr_uuid_e) + + sizeof(struct wlp_attr_wss_sel_mthd) + + sizeof(struct wlp_attr_dev_name) + + strlen(info->name) + + sizeof(struct wlp_attr_manufacturer) + + strlen(info->manufacturer) + + sizeof(struct wlp_attr_model_name) + + strlen(info->model_name) + + sizeof(struct wlp_attr_model_nr) + + strlen(info->model_nr) + + sizeof(struct wlp_attr_serial) + + strlen(info->serial) + + sizeof(struct wlp_attr_prim_dev_type) + + sizeof(struct wlp_attr_wlp_assc_err)); + if (_skb == NULL) { + dev_err(dev, "WLP: Cannot allocate memory for association " + "message.\n"); + result = -ENOMEM; + goto error; + } + _d1 = (void *) _skb->data; + d_printf(6, dev, "D1 starts at %p \n", _d1); + _d1->hdr.mux_hdr = cpu_to_le16(WLP_PROTOCOL_ID); + _d1->hdr.type = WLP_FRAME_ASSOCIATION; + _d1->type = WLP_ASSOC_D1; + + wlp_set_version(&_d1->version, WLP_VERSION); + wlp_set_msg_type(&_d1->msg_type, WLP_ASSOC_D1); + d1_itr = _d1->attr; + used = wlp_set_uuid_e(d1_itr, &wlp->uuid); + used += wlp_set_wss_sel_mthd(d1_itr + used, WLP_WSS_REG_SELECT); + used += wlp_set_dev_name(d1_itr + used, info->name, + strlen(info->name)); + used += wlp_set_manufacturer(d1_itr + used, info->manufacturer, + strlen(info->manufacturer)); + used += wlp_set_model_name(d1_itr + used, info->model_name, + strlen(info->model_name)); + used += wlp_set_model_nr(d1_itr + used, info->model_nr, + strlen(info->model_nr)); + used += wlp_set_serial(d1_itr + used, info->serial, + strlen(info->serial)); + used += wlp_set_prim_dev_type(d1_itr + used, &info->prim_dev_type); + used += wlp_set_wlp_assc_err(d1_itr + used, WLP_ASSOC_ERROR_NONE); + skb_put(_skb, sizeof(*_d1) + used); + d_printf(6, dev, "D1 message:\n"); + d_dump(6, dev, _d1, sizeof(*_d1) + + sizeof(struct wlp_attr_uuid_e) + + sizeof(struct wlp_attr_wss_sel_mthd) + + sizeof(struct wlp_attr_dev_name) + + strlen(info->name) + + sizeof(struct wlp_attr_manufacturer) + + strlen(info->manufacturer) + + sizeof(struct wlp_attr_model_name) + + strlen(info->model_name) + + sizeof(struct wlp_attr_model_nr) + + strlen(info->model_nr) + + sizeof(struct wlp_attr_serial) + + strlen(info->serial) + + sizeof(struct wlp_attr_prim_dev_type) + + sizeof(struct wlp_attr_wlp_assc_err)); + *skb = _skb; +error: + d_fnend(6, dev, "wlp %p, result = %d\n", wlp, result); + return result; +} + +/** + * Construct a D2 association frame + * + * We use the radio control functions to determine the values of the device + * properties. These are of variable length and the total space needed is + * tallied first before we start constructing the message. The radio + * control functions return strings that are terminated with \0. This + * character should not be included in the message (there is a length field + * accompanying it in the attribute). + */ +static +int wlp_build_assoc_d2(struct wlp *wlp, struct wlp_wss *wss, + struct sk_buff **skb, struct wlp_uuid *uuid_e) +{ + + struct device *dev = &wlp->rc->uwb_dev.dev; + int result = 0; + struct wlp_device_info *info; + size_t used = 0; + struct wlp_frame_assoc *_d2; + struct sk_buff *_skb; + void *d2_itr; + size_t mem_needed; + + d_fnstart(6, dev, "wlp %p\n", wlp); + if (wlp->dev_info == NULL) { + result = __wlp_setup_device_info(wlp); + if (result < 0) { + dev_err(dev, "WLP: Unable to setup device " + "information for D2 message.\n"); + goto error; + } + } + info = wlp->dev_info; + d_printf(6, dev, "Local properties:\n" + "Device name (%d bytes): %s\n" + "Model name (%d bytes): %s\n" + "Manufacturer (%d bytes): %s\n" + "Model number (%d bytes): %s\n" + "Serial number (%d bytes): %s\n" + "Primary device type: \n" + " Category: %d \n" + " OUI: %02x:%02x:%02x \n" + " OUI Subdivision: %u \n", + (int)strlen(info->name), info->name, + (int)strlen(info->model_name), info->model_name, + (int)strlen(info->manufacturer), info->manufacturer, + (int)strlen(info->model_nr), info->model_nr, + (int)strlen(info->serial), info->serial, + info->prim_dev_type.category, + info->prim_dev_type.OUI[0], info->prim_dev_type.OUI[1], + info->prim_dev_type.OUI[2], info->prim_dev_type.OUIsubdiv); + mem_needed = sizeof(*_d2) + + sizeof(struct wlp_attr_uuid_e) + + sizeof(struct wlp_attr_uuid_r) + + sizeof(struct wlp_attr_dev_name) + + strlen(info->name) + + sizeof(struct wlp_attr_manufacturer) + + strlen(info->manufacturer) + + sizeof(struct wlp_attr_model_name) + + strlen(info->model_name) + + sizeof(struct wlp_attr_model_nr) + + strlen(info->model_nr) + + sizeof(struct wlp_attr_serial) + + strlen(info->serial) + + sizeof(struct wlp_attr_prim_dev_type) + + sizeof(struct wlp_attr_wlp_assc_err); + if (wlp->wss.state >= WLP_WSS_STATE_ACTIVE) + mem_needed += sizeof(struct wlp_attr_wss_info) + + sizeof(struct wlp_wss_info) + + strlen(wlp->wss.name); + _skb = dev_alloc_skb(mem_needed); + if (_skb == NULL) { + dev_err(dev, "WLP: Cannot allocate memory for association " + "message.\n"); + result = -ENOMEM; + goto error; + } + _d2 = (void *) _skb->data; + d_printf(6, dev, "D2 starts at %p \n", _d2); + _d2->hdr.mux_hdr = cpu_to_le16(WLP_PROTOCOL_ID); + _d2->hdr.type = WLP_FRAME_ASSOCIATION; + _d2->type = WLP_ASSOC_D2; + + wlp_set_version(&_d2->version, WLP_VERSION); + wlp_set_msg_type(&_d2->msg_type, WLP_ASSOC_D2); + d2_itr = _d2->attr; + used = wlp_set_uuid_e(d2_itr, uuid_e); + used += wlp_set_uuid_r(d2_itr + used, &wlp->uuid); + if (wlp->wss.state >= WLP_WSS_STATE_ACTIVE) + used += wlp_set_wss_info(d2_itr + used, &wlp->wss); + used += wlp_set_dev_name(d2_itr + used, info->name, + strlen(info->name)); + used += wlp_set_manufacturer(d2_itr + used, info->manufacturer, + strlen(info->manufacturer)); + used += wlp_set_model_name(d2_itr + used, info->model_name, + strlen(info->model_name)); + used += wlp_set_model_nr(d2_itr + used, info->model_nr, + strlen(info->model_nr)); + used += wlp_set_serial(d2_itr + used, info->serial, + strlen(info->serial)); + used += wlp_set_prim_dev_type(d2_itr + used, &info->prim_dev_type); + used += wlp_set_wlp_assc_err(d2_itr + used, WLP_ASSOC_ERROR_NONE); + skb_put(_skb, sizeof(*_d2) + used); + d_printf(6, dev, "D2 message:\n"); + d_dump(6, dev, _d2, mem_needed); + *skb = _skb; +error: + d_fnend(6, dev, "wlp %p, result = %d\n", wlp, result); + return result; +} + +/** + * Allocate memory for and populate fields of F0 association frame + * + * Currently (while focusing on unsecure enrollment) we ignore the + * nonce's that could be placed in the message. Only the error field is + * populated by the value provided by the caller. + */ +static +int wlp_build_assoc_f0(struct wlp *wlp, struct sk_buff **skb, + enum wlp_assc_error error) +{ + struct device *dev = &wlp->rc->uwb_dev.dev; + int result = -ENOMEM; + struct { + struct wlp_frame_assoc f0_hdr; + struct wlp_attr_enonce enonce; + struct wlp_attr_rnonce rnonce; + struct wlp_attr_wlp_assc_err assc_err; + } *f0; + struct sk_buff *_skb; + struct wlp_nonce tmp; + + d_fnstart(6, dev, "wlp %p\n", wlp); + _skb = dev_alloc_skb(sizeof(*f0)); + if (_skb == NULL) { + dev_err(dev, "WLP: Unable to allocate memory for F0 " + "association frame. \n"); + goto error_alloc; + } + f0 = (void *) _skb->data; + d_printf(6, dev, "F0 starts at %p \n", f0); + f0->f0_hdr.hdr.mux_hdr = cpu_to_le16(WLP_PROTOCOL_ID); + f0->f0_hdr.hdr.type = WLP_FRAME_ASSOCIATION; + f0->f0_hdr.type = WLP_ASSOC_F0; + wlp_set_version(&f0->f0_hdr.version, WLP_VERSION); + wlp_set_msg_type(&f0->f0_hdr.msg_type, WLP_ASSOC_F0); + memset(&tmp, 0, sizeof(tmp)); + wlp_set_enonce(&f0->enonce, &tmp); + wlp_set_rnonce(&f0->rnonce, &tmp); + wlp_set_wlp_assc_err(&f0->assc_err, error); + skb_put(_skb, sizeof(*f0)); + *skb = _skb; + result = 0; +error_alloc: + d_fnend(6, dev, "wlp %p, result %d \n", wlp, result); + return result; +} + +/** + * Parse F0 frame + * + * We just retrieve the values and print it as an error to the user. + * Calling function already knows an error occured (F0 indicates error), so + * we just parse the content as debug for higher layers. + */ +int wlp_parse_f0(struct wlp *wlp, struct sk_buff *skb) +{ + struct device *dev = &wlp->rc->uwb_dev.dev; + struct wlp_frame_assoc *f0 = (void *) skb->data; + void *ptr = skb->data; + size_t len = skb->len; + size_t used; + ssize_t result; + struct wlp_nonce enonce, rnonce; + enum wlp_assc_error assc_err; + char enonce_buf[WLP_WSS_NONCE_STRSIZE]; + char rnonce_buf[WLP_WSS_NONCE_STRSIZE]; + + used = sizeof(*f0); + result = wlp_get_enonce(wlp, ptr + used, &enonce, len - used); + if (result < 0) { + dev_err(dev, "WLP: unable to obtain Enrollee nonce " + "attribute from F0 message.\n"); + goto error_parse; + } + used += result; + result = wlp_get_rnonce(wlp, ptr + used, &rnonce, len - used); + if (result < 0) { + dev_err(dev, "WLP: unable to obtain Registrar nonce " + "attribute from F0 message.\n"); + goto error_parse; + } + used += result; + result = wlp_get_wlp_assc_err(wlp, ptr + used, &assc_err, len - used); + if (result < 0) { + dev_err(dev, "WLP: unable to obtain WLP Association error " + "attribute from F0 message.\n"); + goto error_parse; + } + wlp_wss_nonce_print(enonce_buf, sizeof(enonce_buf), &enonce); + wlp_wss_nonce_print(rnonce_buf, sizeof(rnonce_buf), &rnonce); + dev_err(dev, "WLP: Received F0 error frame from neighbor. Enrollee " + "nonce: %s, Registrar nonce: %s, WLP Association error: %s.\n", + enonce_buf, rnonce_buf, wlp_assc_error_str(assc_err)); + result = 0; +error_parse: + return result; +} + +/** + * Retrieve variable device information from association message + * + * The device information parsed is not required in any message. This + * routine will thus not fail if an attribute is not present. + * The attributes are expected in a certain order, even if all are not + * present. The "attribute type" value is used to ensure the attributes + * are parsed in the correct order. + * + * If an error is encountered during parsing the function will return an + * error code, when this happens the given device_info structure may be + * partially filled. + */ +static +int wlp_get_variable_info(struct wlp *wlp, void *data, + struct wlp_device_info *dev_info, ssize_t len) +{ + struct device *dev = &wlp->rc->uwb_dev.dev; + size_t used = 0; + struct wlp_attr_hdr *hdr; + ssize_t result = 0; + unsigned last = 0; + + while (len - used > 0) { + if (len - used < sizeof(*hdr)) { + dev_err(dev, "WLP: Partial data in frame, cannot " + "parse. \n"); + goto error_parse; + } + hdr = data + used; + switch (le16_to_cpu(hdr->type)) { + case WLP_ATTR_MANUF: + if (last >= WLP_ATTR_MANUF) { + dev_err(dev, "WLP: Incorrect order of " + "attribute values in D1 msg.\n"); + goto error_parse; + } + result = wlp_get_manufacturer(wlp, data + used, + dev_info->manufacturer, + len - used); + if (result < 0) { + dev_err(dev, "WLP: Unable to obtain " + "Manufacturer attribute from D1 " + "message.\n"); + goto error_parse; + } + last = WLP_ATTR_MANUF; + used += result; + break; + case WLP_ATTR_MODEL_NAME: + if (last >= WLP_ATTR_MODEL_NAME) { + dev_err(dev, "WLP: Incorrect order of " + "attribute values in D1 msg.\n"); + goto error_parse; + } + result = wlp_get_model_name(wlp, data + used, + dev_info->model_name, + len - used); + if (result < 0) { + dev_err(dev, "WLP: Unable to obtain Model " + "name attribute from D1 message.\n"); + goto error_parse; + } + last = WLP_ATTR_MODEL_NAME; + used += result; + break; + case WLP_ATTR_MODEL_NR: + if (last >= WLP_ATTR_MODEL_NR) { + dev_err(dev, "WLP: Incorrect order of " + "attribute values in D1 msg.\n"); + goto error_parse; + } + result = wlp_get_model_nr(wlp, data + used, + dev_info->model_nr, + len - used); + if (result < 0) { + dev_err(dev, "WLP: Unable to obtain Model " + "number attribute from D1 message.\n"); + goto error_parse; + } + last = WLP_ATTR_MODEL_NR; + used += result; + break; + case WLP_ATTR_SERIAL: + if (last >= WLP_ATTR_SERIAL) { + dev_err(dev, "WLP: Incorrect order of " + "attribute values in D1 msg.\n"); + goto error_parse; + } + result = wlp_get_serial(wlp, data + used, + dev_info->serial, len - used); + if (result < 0) { + dev_err(dev, "WLP: Unable to obtain Serial " + "number attribute from D1 message.\n"); + goto error_parse; + } + last = WLP_ATTR_SERIAL; + used += result; + break; + case WLP_ATTR_PRI_DEV_TYPE: + if (last >= WLP_ATTR_PRI_DEV_TYPE) { + dev_err(dev, "WLP: Incorrect order of " + "attribute values in D1 msg.\n"); + goto error_parse; + } + result = wlp_get_prim_dev_type(wlp, data + used, + &dev_info->prim_dev_type, + len - used); + if (result < 0) { + dev_err(dev, "WLP: Unable to obtain Primary " + "device type attribute from D1 " + "message.\n"); + goto error_parse; + } + dev_info->prim_dev_type.category = + le16_to_cpu(dev_info->prim_dev_type.category); + dev_info->prim_dev_type.subID = + le16_to_cpu(dev_info->prim_dev_type.subID); + last = WLP_ATTR_PRI_DEV_TYPE; + used += result; + break; + default: + /* This is not variable device information. */ + goto out; + break; + } + } +out: + return used; +error_parse: + return -EINVAL; +} + +/** + * Parse incoming D1 frame, populate attribute values + * + * Caller provides pointers to memory already allocated for attributes + * expected in the D1 frame. These variables will be populated. + */ +static +int wlp_parse_d1_frame(struct wlp *wlp, struct sk_buff *skb, + struct wlp_uuid *uuid_e, + enum wlp_wss_sel_mthd *sel_mthd, + struct wlp_device_info *dev_info, + enum wlp_assc_error *assc_err) +{ + struct device *dev = &wlp->rc->uwb_dev.dev; + struct wlp_frame_assoc *d1 = (void *) skb->data; + void *ptr = skb->data; + size_t len = skb->len; + size_t used; + ssize_t result; + + used = sizeof(*d1); + result = wlp_get_uuid_e(wlp, ptr + used, uuid_e, len - used); + if (result < 0) { + dev_err(dev, "WLP: unable to obtain UUID-E attribute from D1 " + "message.\n"); + goto error_parse; + } + used += result; + result = wlp_get_wss_sel_mthd(wlp, ptr + used, sel_mthd, len - used); + if (result < 0) { + dev_err(dev, "WLP: unable to obtain WSS selection method " + "from D1 message.\n"); + goto error_parse; + } + used += result; + result = wlp_get_dev_name(wlp, ptr + used, dev_info->name, + len - used); + if (result < 0) { + dev_err(dev, "WLP: unable to obtain Device Name from D1 " + "message.\n"); + goto error_parse; + } + used += result; + result = wlp_get_variable_info(wlp, ptr + used, dev_info, len - used); + if (result < 0) { + dev_err(dev, "WLP: unable to obtain Device Information from " + "D1 message.\n"); + goto error_parse; + } + used += result; + result = wlp_get_wlp_assc_err(wlp, ptr + used, assc_err, len - used); + if (result < 0) { + dev_err(dev, "WLP: unable to obtain WLP Association Error " + "Information from D1 message.\n"); + goto error_parse; + } + result = 0; +error_parse: + return result; +} +/** + * Handle incoming D1 frame + * + * The frame has already been verified to contain an Association header with + * the correct version number. Parse the incoming frame, construct and send + * a D2 frame in response. + * + * It is not clear what to do with most fields in the incoming D1 frame. We + * retrieve and discard the information here for now. + */ +void wlp_handle_d1_frame(struct work_struct *ws) +{ + struct wlp_assoc_frame_ctx *frame_ctx = container_of(ws, + struct wlp_assoc_frame_ctx, + ws); + struct wlp *wlp = frame_ctx->wlp; + struct wlp_wss *wss = &wlp->wss; + struct sk_buff *skb = frame_ctx->skb; + struct uwb_dev_addr *src = &frame_ctx->src; + int result; + struct device *dev = &wlp->rc->uwb_dev.dev; + struct wlp_uuid uuid_e; + enum wlp_wss_sel_mthd sel_mthd = 0; + struct wlp_device_info dev_info; + enum wlp_assc_error assc_err; + char uuid[WLP_WSS_UUID_STRSIZE]; + struct sk_buff *resp = NULL; + + /* Parse D1 frame */ + d_fnstart(6, dev, "WLP: handle D1 frame. wlp = %p, skb = %p\n", + wlp, skb); + mutex_lock(&wss->mutex); + mutex_lock(&wlp->mutex); /* to access wlp->uuid */ + memset(&dev_info, 0, sizeof(dev_info)); + result = wlp_parse_d1_frame(wlp, skb, &uuid_e, &sel_mthd, &dev_info, + &assc_err); + if (result < 0) { + dev_err(dev, "WLP: Unable to parse incoming D1 frame.\n"); + kfree_skb(skb); + goto out; + } + wlp_wss_uuid_print(uuid, sizeof(uuid), &uuid_e); + d_printf(6, dev, "From D1 frame:\n" + "UUID-E: %s\n" + "Selection method: %d\n" + "Device name (%d bytes): %s\n" + "Model name (%d bytes): %s\n" + "Manufacturer (%d bytes): %s\n" + "Model number (%d bytes): %s\n" + "Serial number (%d bytes): %s\n" + "Primary device type: \n" + " Category: %d \n" + " OUI: %02x:%02x:%02x \n" + " OUI Subdivision: %u \n", + uuid, sel_mthd, + (int)strlen(dev_info.name), dev_info.name, + (int)strlen(dev_info.model_name), dev_info.model_name, + (int)strlen(dev_info.manufacturer), dev_info.manufacturer, + (int)strlen(dev_info.model_nr), dev_info.model_nr, + (int)strlen(dev_info.serial), dev_info.serial, + dev_info.prim_dev_type.category, + dev_info.prim_dev_type.OUI[0], + dev_info.prim_dev_type.OUI[1], + dev_info.prim_dev_type.OUI[2], + dev_info.prim_dev_type.OUIsubdiv); + + kfree_skb(skb); + if (!wlp_uuid_is_set(&wlp->uuid)) { + dev_err(dev, "WLP: UUID is not set. Set via sysfs to " + "proceed. Respong to D1 message with error F0.\n"); + result = wlp_build_assoc_f0(wlp, &resp, + WLP_ASSOC_ERROR_NOT_READY); + if (result < 0) { + dev_err(dev, "WLP: Unable to construct F0 message.\n"); + goto out; + } + } else { + /* Construct D2 frame */ + result = wlp_build_assoc_d2(wlp, wss, &resp, &uuid_e); + if (result < 0) { + dev_err(dev, "WLP: Unable to construct D2 message.\n"); + goto out; + } + } + /* Send D2 frame */ + BUG_ON(wlp->xmit_frame == NULL); + result = wlp->xmit_frame(wlp, resp, src); + if (result < 0) { + dev_err(dev, "WLP: Unable to transmit D2 association " + "message: %d\n", result); + if (result == -ENXIO) + dev_err(dev, "WLP: Is network interface up? \n"); + /* We could try again ... */ + dev_kfree_skb_any(resp); /* we need to free if tx fails */ + } +out: + kfree(frame_ctx); + mutex_unlock(&wlp->mutex); + mutex_unlock(&wss->mutex); + d_fnend(6, dev, "WLP: handle D1 frame. wlp = %p\n", wlp); +} + +/** + * Parse incoming D2 frame, create and populate temporary cache + * + * @skb: socket buffer in which D2 frame can be found + * @neighbor: the neighbor that sent the D2 frame + * + * Will allocate memory for temporary storage of information learned during + * discovery. + */ +int wlp_parse_d2_frame_to_cache(struct wlp *wlp, struct sk_buff *skb, + struct wlp_neighbor_e *neighbor) +{ + struct device *dev = &wlp->rc->uwb_dev.dev; + struct wlp_frame_assoc *d2 = (void *) skb->data; + void *ptr = skb->data; + size_t len = skb->len; + size_t used; + ssize_t result; + struct wlp_uuid uuid_e; + struct wlp_device_info *nb_info; + enum wlp_assc_error assc_err; + + used = sizeof(*d2); + result = wlp_get_uuid_e(wlp, ptr + used, &uuid_e, len - used); + if (result < 0) { + dev_err(dev, "WLP: unable to obtain UUID-E attribute from D2 " + "message.\n"); + goto error_parse; + } + if (memcmp(&uuid_e, &wlp->uuid, sizeof(uuid_e))) { + dev_err(dev, "WLP: UUID-E in incoming D2 does not match " + "local UUID sent in D1. \n"); + goto error_parse; + } + used += result; + result = wlp_get_uuid_r(wlp, ptr + used, &neighbor->uuid, len - used); + if (result < 0) { + dev_err(dev, "WLP: unable to obtain UUID-R attribute from D2 " + "message.\n"); + goto error_parse; + } + used += result; + result = wlp_get_wss_info_to_cache(wlp, ptr + used, neighbor, + len - used); + if (result < 0) { + dev_err(dev, "WLP: unable to obtain WSS information " + "from D2 message.\n"); + goto error_parse; + } + used += result; + neighbor->info = kzalloc(sizeof(struct wlp_device_info), GFP_KERNEL); + if (neighbor->info == NULL) { + dev_err(dev, "WLP: cannot allocate memory to store device " + "info.\n"); + result = -ENOMEM; + goto error_parse; + } + nb_info = neighbor->info; + result = wlp_get_dev_name(wlp, ptr + used, nb_info->name, + len - used); + if (result < 0) { + dev_err(dev, "WLP: unable to obtain Device Name from D2 " + "message.\n"); + goto error_parse; + } + used += result; + result = wlp_get_variable_info(wlp, ptr + used, nb_info, len - used); + if (result < 0) { + dev_err(dev, "WLP: unable to obtain Device Information from " + "D2 message.\n"); + goto error_parse; + } + used += result; + result = wlp_get_wlp_assc_err(wlp, ptr + used, &assc_err, len - used); + if (result < 0) { + dev_err(dev, "WLP: unable to obtain WLP Association Error " + "Information from D2 message.\n"); + goto error_parse; + } + if (assc_err != WLP_ASSOC_ERROR_NONE) { + dev_err(dev, "WLP: neighbor device returned association " + "error %d\n", assc_err); + result = -EINVAL; + goto error_parse; + } + result = 0; +error_parse: + if (result < 0) + wlp_remove_neighbor_tmp_info(neighbor); + return result; +} + +/** + * Parse incoming D2 frame, populate attribute values of WSS bein enrolled in + * + * @wss: our WSS that will be enrolled + * @skb: socket buffer in which D2 frame can be found + * @neighbor: the neighbor that sent the D2 frame + * @wssid: the wssid of the WSS in which we want to enroll + * + * Forms part of enrollment sequence. We are trying to enroll in WSS with + * @wssid by using @neighbor as registrar. A D1 message was sent to + * @neighbor and now we need to parse the D2 response. The neighbor's + * response is searched for the requested WSS and if found (and it accepts + * enrollment), we store the information. + */ +int wlp_parse_d2_frame_to_enroll(struct wlp_wss *wss, struct sk_buff *skb, + struct wlp_neighbor_e *neighbor, + struct wlp_uuid *wssid) +{ + struct wlp *wlp = container_of(wss, struct wlp, wss); + struct device *dev = &wlp->rc->uwb_dev.dev; + void *ptr = skb->data; + size_t len = skb->len; + size_t used; + ssize_t result; + struct wlp_uuid uuid_e; + struct wlp_uuid uuid_r; + struct wlp_device_info nb_info; + enum wlp_assc_error assc_err; + char uuid_bufA[WLP_WSS_UUID_STRSIZE]; + char uuid_bufB[WLP_WSS_UUID_STRSIZE]; + + used = sizeof(struct wlp_frame_assoc); + result = wlp_get_uuid_e(wlp, ptr + used, &uuid_e, len - used); + if (result < 0) { + dev_err(dev, "WLP: unable to obtain UUID-E attribute from D2 " + "message.\n"); + goto error_parse; + } + if (memcmp(&uuid_e, &wlp->uuid, sizeof(uuid_e))) { + dev_err(dev, "WLP: UUID-E in incoming D2 does not match " + "local UUID sent in D1. \n"); + goto error_parse; + } + used += result; + result = wlp_get_uuid_r(wlp, ptr + used, &uuid_r, len - used); + if (result < 0) { + dev_err(dev, "WLP: unable to obtain UUID-R attribute from D2 " + "message.\n"); + goto error_parse; + } + if (memcmp(&uuid_r, &neighbor->uuid, sizeof(uuid_r))) { + wlp_wss_uuid_print(uuid_bufA, sizeof(uuid_bufA), + &neighbor->uuid); + wlp_wss_uuid_print(uuid_bufB, sizeof(uuid_bufB), &uuid_r); + dev_err(dev, "WLP: UUID of neighbor does not match UUID " + "learned during discovery. Originally discovered: %s, " + "now from D2 message: %s\n", uuid_bufA, uuid_bufB); + result = -EINVAL; + goto error_parse; + } + used += result; + wss->wssid = *wssid; + result = wlp_get_wss_info_to_enroll(wlp, ptr + used, wss, len - used); + if (result < 0) { + dev_err(dev, "WLP: unable to obtain WSS information " + "from D2 message.\n"); + goto error_parse; + } + if (wss->state != WLP_WSS_STATE_PART_ENROLLED) { + dev_err(dev, "WLP: D2 message did not contain information " + "for successful enrollment. \n"); + result = -EINVAL; + goto error_parse; + } + used += result; + /* Place device information on stack to continue parsing of message */ + result = wlp_get_dev_name(wlp, ptr + used, nb_info.name, + len - used); + if (result < 0) { + dev_err(dev, "WLP: unable to obtain Device Name from D2 " + "message.\n"); + goto error_parse; + } + used += result; + result = wlp_get_variable_info(wlp, ptr + used, &nb_info, len - used); + if (result < 0) { + dev_err(dev, "WLP: unable to obtain Device Information from " + "D2 message.\n"); + goto error_parse; + } + used += result; + result = wlp_get_wlp_assc_err(wlp, ptr + used, &assc_err, len - used); + if (result < 0) { + dev_err(dev, "WLP: unable to obtain WLP Association Error " + "Information from D2 message.\n"); + goto error_parse; + } + if (assc_err != WLP_ASSOC_ERROR_NONE) { + dev_err(dev, "WLP: neighbor device returned association " + "error %d\n", assc_err); + if (wss->state == WLP_WSS_STATE_PART_ENROLLED) { + dev_err(dev, "WLP: Enrolled in WSS (should not " + "happen according to spec). Undoing. \n"); + wlp_wss_reset(wss); + } + result = -EINVAL; + goto error_parse; + } + result = 0; +error_parse: + return result; +} + +/** + * Parse C3/C4 frame into provided variables + * + * @wssid: will point to copy of wssid retrieved from C3/C4 frame + * @tag: will point to copy of tag retrieved from C3/C4 frame + * @virt_addr: will point to copy of virtual address retrieved from C3/C4 + * frame. + * + * Calling function has to allocate memory for these values. + * + * skb contains a valid C3/C4 frame, return the individual fields of this + * frame in the provided variables. + */ +int wlp_parse_c3c4_frame(struct wlp *wlp, struct sk_buff *skb, + struct wlp_uuid *wssid, u8 *tag, + struct uwb_mac_addr *virt_addr) +{ + struct device *dev = &wlp->rc->uwb_dev.dev; + int result; + void *ptr = skb->data; + size_t len = skb->len; + size_t used; + char buf[WLP_WSS_UUID_STRSIZE]; + struct wlp_frame_assoc *assoc = ptr; + + d_fnstart(6, dev, "wlp %p, skb %p \n", wlp, skb); + used = sizeof(*assoc); + result = wlp_get_wssid(wlp, ptr + used, wssid, len - used); + if (result < 0) { + dev_err(dev, "WLP: unable to obtain WSSID attribute from " + "%s message.\n", wlp_assoc_frame_str(assoc->type)); + goto error_parse; + } + used += result; + result = wlp_get_wss_tag(wlp, ptr + used, tag, len - used); + if (result < 0) { + dev_err(dev, "WLP: unable to obtain WSS tag attribute from " + "%s message.\n", wlp_assoc_frame_str(assoc->type)); + goto error_parse; + } + used += result; + result = wlp_get_wss_virt(wlp, ptr + used, virt_addr, len - used); + if (result < 0) { + dev_err(dev, "WLP: unable to obtain WSS virtual address " + "attribute from %s message.\n", + wlp_assoc_frame_str(assoc->type)); + goto error_parse; + } + wlp_wss_uuid_print(buf, sizeof(buf), wssid); + d_printf(6, dev, "WLP: parsed: WSSID %s, tag 0x%02x, virt " + "%02x:%02x:%02x:%02x:%02x:%02x \n", buf, *tag, + virt_addr->data[0], virt_addr->data[1], virt_addr->data[2], + virt_addr->data[3], virt_addr->data[4], virt_addr->data[5]); + +error_parse: + d_fnend(6, dev, "wlp %p, skb %p, result = %d \n", wlp, skb, result); + return result; +} + +/** + * Allocate memory for and populate fields of C1 or C2 association frame + * + * The C1 and C2 association frames appear identical - except for the type. + */ +static +int wlp_build_assoc_c1c2(struct wlp *wlp, struct wlp_wss *wss, + struct sk_buff **skb, enum wlp_assoc_type type) +{ + struct device *dev = &wlp->rc->uwb_dev.dev; + int result = -ENOMEM; + struct { + struct wlp_frame_assoc c_hdr; + struct wlp_attr_wssid wssid; + } *c; + struct sk_buff *_skb; + + d_fnstart(6, dev, "wlp %p, wss %p \n", wlp, wss); + _skb = dev_alloc_skb(sizeof(*c)); + if (_skb == NULL) { + dev_err(dev, "WLP: Unable to allocate memory for C1/C2 " + "association frame. \n"); + goto error_alloc; + } + c = (void *) _skb->data; + d_printf(6, dev, "C1/C2 starts at %p \n", c); + c->c_hdr.hdr.mux_hdr = cpu_to_le16(WLP_PROTOCOL_ID); + c->c_hdr.hdr.type = WLP_FRAME_ASSOCIATION; + c->c_hdr.type = type; + wlp_set_version(&c->c_hdr.version, WLP_VERSION); + wlp_set_msg_type(&c->c_hdr.msg_type, type); + wlp_set_wssid(&c->wssid, &wss->wssid); + skb_put(_skb, sizeof(*c)); + d_printf(6, dev, "C1/C2 message:\n"); + d_dump(6, dev, c, sizeof(*c)); + *skb = _skb; + result = 0; +error_alloc: + d_fnend(6, dev, "wlp %p, wss %p, result %d \n", wlp, wss, result); + return result; +} + + +static +int wlp_build_assoc_c1(struct wlp *wlp, struct wlp_wss *wss, + struct sk_buff **skb) +{ + return wlp_build_assoc_c1c2(wlp, wss, skb, WLP_ASSOC_C1); +} + +static +int wlp_build_assoc_c2(struct wlp *wlp, struct wlp_wss *wss, + struct sk_buff **skb) +{ + return wlp_build_assoc_c1c2(wlp, wss, skb, WLP_ASSOC_C2); +} + + +/** + * Allocate memory for and populate fields of C3 or C4 association frame + * + * The C3 and C4 association frames appear identical - except for the type. + */ +static +int wlp_build_assoc_c3c4(struct wlp *wlp, struct wlp_wss *wss, + struct sk_buff **skb, enum wlp_assoc_type type) +{ + struct device *dev = &wlp->rc->uwb_dev.dev; + int result = -ENOMEM; + struct { + struct wlp_frame_assoc c_hdr; + struct wlp_attr_wssid wssid; + struct wlp_attr_wss_tag wss_tag; + struct wlp_attr_wss_virt wss_virt; + } *c; + struct sk_buff *_skb; + + d_fnstart(6, dev, "wlp %p, wss %p \n", wlp, wss); + _skb = dev_alloc_skb(sizeof(*c)); + if (_skb == NULL) { + dev_err(dev, "WLP: Unable to allocate memory for C3/C4 " + "association frame. \n"); + goto error_alloc; + } + c = (void *) _skb->data; + d_printf(6, dev, "C3/C4 starts at %p \n", c); + c->c_hdr.hdr.mux_hdr = cpu_to_le16(WLP_PROTOCOL_ID); + c->c_hdr.hdr.type = WLP_FRAME_ASSOCIATION; + c->c_hdr.type = type; + wlp_set_version(&c->c_hdr.version, WLP_VERSION); + wlp_set_msg_type(&c->c_hdr.msg_type, type); + wlp_set_wssid(&c->wssid, &wss->wssid); + wlp_set_wss_tag(&c->wss_tag, wss->tag); + wlp_set_wss_virt(&c->wss_virt, &wss->virtual_addr); + skb_put(_skb, sizeof(*c)); + d_printf(6, dev, "C3/C4 message:\n"); + d_dump(6, dev, c, sizeof(*c)); + *skb = _skb; + result = 0; +error_alloc: + d_fnend(6, dev, "wlp %p, wss %p, result %d \n", wlp, wss, result); + return result; +} + +static +int wlp_build_assoc_c3(struct wlp *wlp, struct wlp_wss *wss, + struct sk_buff **skb) +{ + return wlp_build_assoc_c3c4(wlp, wss, skb, WLP_ASSOC_C3); +} + +static +int wlp_build_assoc_c4(struct wlp *wlp, struct wlp_wss *wss, + struct sk_buff **skb) +{ + return wlp_build_assoc_c3c4(wlp, wss, skb, WLP_ASSOC_C4); +} + + +#define wlp_send_assoc(type, id) \ +static int wlp_send_assoc_##type(struct wlp *wlp, struct wlp_wss *wss, \ + struct uwb_dev_addr *dev_addr) \ +{ \ + struct device *dev = &wlp->rc->uwb_dev.dev; \ + int result; \ + struct sk_buff *skb = NULL; \ + d_fnstart(6, dev, "wlp %p, wss %p, neighbor: %02x:%02x\n", \ + wlp, wss, dev_addr->data[1], dev_addr->data[0]); \ + d_printf(6, dev, "WLP: Constructing %s frame. \n", \ + wlp_assoc_frame_str(id)); \ + /* Build the frame */ \ + result = wlp_build_assoc_##type(wlp, wss, &skb); \ + if (result < 0) { \ + dev_err(dev, "WLP: Unable to construct %s association " \ + "frame: %d\n", wlp_assoc_frame_str(id), result);\ + goto error_build_assoc; \ + } \ + /* Send the frame */ \ + d_printf(6, dev, "Transmitting %s frame to %02x:%02x \n", \ + wlp_assoc_frame_str(id), \ + dev_addr->data[1], dev_addr->data[0]); \ + BUG_ON(wlp->xmit_frame == NULL); \ + result = wlp->xmit_frame(wlp, skb, dev_addr); \ + if (result < 0) { \ + dev_err(dev, "WLP: Unable to transmit %s association " \ + "message: %d\n", wlp_assoc_frame_str(id), \ + result); \ + if (result == -ENXIO) \ + dev_err(dev, "WLP: Is network interface " \ + "up? \n"); \ + goto error_xmit; \ + } \ + return 0; \ +error_xmit: \ + /* We could try again ... */ \ + dev_kfree_skb_any(skb);/*we need to free if tx fails*/ \ +error_build_assoc: \ + d_fnend(6, dev, "wlp %p, wss %p, neighbor: %02x:%02x\n", \ + wlp, wss, dev_addr->data[1], dev_addr->data[0]); \ + return result; \ +} + +wlp_send_assoc(d1, WLP_ASSOC_D1) +wlp_send_assoc(c1, WLP_ASSOC_C1) +wlp_send_assoc(c3, WLP_ASSOC_C3) + +int wlp_send_assoc_frame(struct wlp *wlp, struct wlp_wss *wss, + struct uwb_dev_addr *dev_addr, + enum wlp_assoc_type type) +{ + int result = 0; + struct device *dev = &wlp->rc->uwb_dev.dev; + switch (type) { + case WLP_ASSOC_D1: + result = wlp_send_assoc_d1(wlp, wss, dev_addr); + break; + case WLP_ASSOC_C1: + result = wlp_send_assoc_c1(wlp, wss, dev_addr); + break; + case WLP_ASSOC_C3: + result = wlp_send_assoc_c3(wlp, wss, dev_addr); + break; + default: + dev_err(dev, "WLP: Received request to send unknown " + "association message.\n"); + result = -EINVAL; + break; + } + return result; +} + +/** + * Handle incoming C1 frame + * + * The frame has already been verified to contain an Association header with + * the correct version number. Parse the incoming frame, construct and send + * a C2 frame in response. + */ +void wlp_handle_c1_frame(struct work_struct *ws) +{ + struct wlp_assoc_frame_ctx *frame_ctx = container_of(ws, + struct wlp_assoc_frame_ctx, + ws); + struct wlp *wlp = frame_ctx->wlp; + struct wlp_wss *wss = &wlp->wss; + struct device *dev = &wlp->rc->uwb_dev.dev; + struct wlp_frame_assoc *c1 = (void *) frame_ctx->skb->data; + unsigned int len = frame_ctx->skb->len; + struct uwb_dev_addr *src = &frame_ctx->src; + int result; + struct wlp_uuid wssid; + char buf[WLP_WSS_UUID_STRSIZE]; + struct sk_buff *resp = NULL; + + /* Parse C1 frame */ + d_fnstart(6, dev, "WLP: handle C1 frame. wlp = %p, c1 = %p\n", + wlp, c1); + mutex_lock(&wss->mutex); + result = wlp_get_wssid(wlp, (void *)c1 + sizeof(*c1), &wssid, + len - sizeof(*c1)); + if (result < 0) { + dev_err(dev, "WLP: unable to obtain WSSID from C1 frame.\n"); + goto out; + } + wlp_wss_uuid_print(buf, sizeof(buf), &wssid); + d_printf(6, dev, "Received C1 frame with WSSID %s \n", buf); + if (!memcmp(&wssid, &wss->wssid, sizeof(wssid)) + && wss->state == WLP_WSS_STATE_ACTIVE) { + d_printf(6, dev, "WSSID from C1 frame is known locally " + "and is active\n"); + /* Construct C2 frame */ + result = wlp_build_assoc_c2(wlp, wss, &resp); + if (result < 0) { + dev_err(dev, "WLP: Unable to construct C2 message.\n"); + goto out; + } + } else { + d_printf(6, dev, "WSSID from C1 frame is not known locally " + "or is not active\n"); + /* Construct F0 frame */ + result = wlp_build_assoc_f0(wlp, &resp, WLP_ASSOC_ERROR_INV); + if (result < 0) { + dev_err(dev, "WLP: Unable to construct F0 message.\n"); + goto out; + } + } + /* Send C2 frame */ + d_printf(6, dev, "Transmitting response (C2/F0) frame to %02x:%02x \n", + src->data[1], src->data[0]); + BUG_ON(wlp->xmit_frame == NULL); + result = wlp->xmit_frame(wlp, resp, src); + if (result < 0) { + dev_err(dev, "WLP: Unable to transmit response association " + "message: %d\n", result); + if (result == -ENXIO) + dev_err(dev, "WLP: Is network interface up? \n"); + /* We could try again ... */ + dev_kfree_skb_any(resp); /* we need to free if tx fails */ + } +out: + kfree_skb(frame_ctx->skb); + kfree(frame_ctx); + mutex_unlock(&wss->mutex); + d_fnend(6, dev, "WLP: handle C1 frame. wlp = %p\n", wlp); +} + +/** + * Handle incoming C3 frame + * + * The frame has already been verified to contain an Association header with + * the correct version number. Parse the incoming frame, construct and send + * a C4 frame in response. If the C3 frame identifies a WSS that is locally + * active then we connect to this neighbor (add it to our EDA cache). + */ +void wlp_handle_c3_frame(struct work_struct *ws) +{ + struct wlp_assoc_frame_ctx *frame_ctx = container_of(ws, + struct wlp_assoc_frame_ctx, + ws); + struct wlp *wlp = frame_ctx->wlp; + struct wlp_wss *wss = &wlp->wss; + struct device *dev = &wlp->rc->uwb_dev.dev; + struct sk_buff *skb = frame_ctx->skb; + struct uwb_dev_addr *src = &frame_ctx->src; + int result; + char buf[WLP_WSS_UUID_STRSIZE]; + struct sk_buff *resp = NULL; + struct wlp_uuid wssid; + u8 tag; + struct uwb_mac_addr virt_addr; + + /* Parse C3 frame */ + d_fnstart(6, dev, "WLP: handle C3 frame. wlp = %p, skb = %p\n", + wlp, skb); + mutex_lock(&wss->mutex); + result = wlp_parse_c3c4_frame(wlp, skb, &wssid, &tag, &virt_addr); + if (result < 0) { + dev_err(dev, "WLP: unable to obtain values from C3 frame.\n"); + goto out; + } + wlp_wss_uuid_print(buf, sizeof(buf), &wssid); + d_printf(6, dev, "Received C3 frame with WSSID %s \n", buf); + if (!memcmp(&wssid, &wss->wssid, sizeof(wssid)) + && wss->state >= WLP_WSS_STATE_ACTIVE) { + d_printf(6, dev, "WSSID from C3 frame is known locally " + "and is active\n"); + result = wlp_eda_update_node(&wlp->eda, src, wss, + (void *) virt_addr.data, tag, + WLP_WSS_CONNECTED); + if (result < 0) { + dev_err(dev, "WLP: Unable to update EDA cache " + "with new connected neighbor information.\n"); + result = wlp_build_assoc_f0(wlp, &resp, + WLP_ASSOC_ERROR_INT); + if (result < 0) { + dev_err(dev, "WLP: Unable to construct F0 " + "message.\n"); + goto out; + } + } else { + wss->state = WLP_WSS_STATE_CONNECTED; + /* Construct C4 frame */ + result = wlp_build_assoc_c4(wlp, wss, &resp); + if (result < 0) { + dev_err(dev, "WLP: Unable to construct C4 " + "message.\n"); + goto out; + } + } + } else { + d_printf(6, dev, "WSSID from C3 frame is not known locally " + "or is not active\n"); + /* Construct F0 frame */ + result = wlp_build_assoc_f0(wlp, &resp, WLP_ASSOC_ERROR_INV); + if (result < 0) { + dev_err(dev, "WLP: Unable to construct F0 message.\n"); + goto out; + } + } + /* Send C4 frame */ + d_printf(6, dev, "Transmitting response (C4/F0) frame to %02x:%02x \n", + src->data[1], src->data[0]); + BUG_ON(wlp->xmit_frame == NULL); + result = wlp->xmit_frame(wlp, resp, src); + if (result < 0) { + dev_err(dev, "WLP: Unable to transmit response association " + "message: %d\n", result); + if (result == -ENXIO) + dev_err(dev, "WLP: Is network interface up? \n"); + /* We could try again ... */ + dev_kfree_skb_any(resp); /* we need to free if tx fails */ + } +out: + kfree_skb(frame_ctx->skb); + kfree(frame_ctx); + mutex_unlock(&wss->mutex); + d_fnend(6, dev, "WLP: handle C3 frame. wlp = %p, skb = %p\n", + wlp, skb); +} + + diff --git a/drivers/uwb/wlp/sysfs.c b/drivers/uwb/wlp/sysfs.c new file mode 100644 index 000000000000..1bb9b1f97d47 --- /dev/null +++ b/drivers/uwb/wlp/sysfs.c @@ -0,0 +1,709 @@ +/* + * WiMedia Logical Link Control Protocol (WLP) + * sysfs functions + * + * Copyright (C) 2007 Intel Corporation + * Reinette Chatre <reinette.chatre@intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + * + * + * FIXME: Docs + * + */ + +#include <linux/wlp.h> +#include "wlp-internal.h" + +static +size_t wlp_wss_wssid_e_print(char *buf, size_t bufsize, + struct wlp_wssid_e *wssid_e) +{ + size_t used = 0; + used += scnprintf(buf, bufsize, " WSS: "); + used += wlp_wss_uuid_print(buf + used, bufsize - used, + &wssid_e->wssid); + + if (wssid_e->info != NULL) { + used += scnprintf(buf + used, bufsize - used, " "); + used += uwb_mac_addr_print(buf + used, bufsize - used, + &wssid_e->info->bcast); + used += scnprintf(buf + used, bufsize - used, " %u %u %s\n", + wssid_e->info->accept_enroll, + wssid_e->info->sec_status, + wssid_e->info->name); + } + return used; +} + +/** + * Print out information learned from neighbor discovery + * + * Some fields being printed may not be included in the device discovery + * information (it is not mandatory). We are thus careful how the + * information is printed to ensure it is clear to the user what field is + * being referenced. + * The information being printed is for one time use - temporary storage is + * cleaned after it is printed. + * + * Ideally sysfs output should be on one line. The information printed here + * contain a few strings so it will be hard to parse if they are all + * printed on the same line - without agreeing on a standard field + * separator. + */ +static +ssize_t wlp_wss_neighborhood_print_remove(struct wlp *wlp, char *buf, + size_t bufsize) +{ + size_t used = 0; + struct wlp_neighbor_e *neighb; + struct wlp_wssid_e *wssid_e; + + mutex_lock(&wlp->nbmutex); + used = scnprintf(buf, bufsize, "#Neighbor information\n" + "#uuid dev_addr\n" + "# Device Name:\n# Model Name:\n# Manufacturer:\n" + "# Model Nr:\n# Serial:\n" + "# Pri Dev type: CategoryID OUI OUISubdiv " + "SubcategoryID\n" + "# WSS: WSSID WSS_name accept_enroll sec_status " + "bcast\n" + "# WSS: WSSID WSS_name accept_enroll sec_status " + "bcast\n\n"); + list_for_each_entry(neighb, &wlp->neighbors, node) { + if (bufsize - used <= 0) + goto out; + used += wlp_wss_uuid_print(buf + used, bufsize - used, + &neighb->uuid); + buf[used++] = ' '; + used += uwb_dev_addr_print(buf + used, bufsize - used, + &neighb->uwb_dev->dev_addr); + if (neighb->info != NULL) + used += scnprintf(buf + used, bufsize - used, + "\n Device Name: %s\n" + " Model Name: %s\n" + " Manufacturer:%s \n" + " Model Nr: %s\n" + " Serial: %s\n" + " Pri Dev type: " + "%u %02x:%02x:%02x %u %u\n", + neighb->info->name, + neighb->info->model_name, + neighb->info->manufacturer, + neighb->info->model_nr, + neighb->info->serial, + neighb->info->prim_dev_type.category, + neighb->info->prim_dev_type.OUI[0], + neighb->info->prim_dev_type.OUI[1], + neighb->info->prim_dev_type.OUI[2], + neighb->info->prim_dev_type.OUIsubdiv, + neighb->info->prim_dev_type.subID); + list_for_each_entry(wssid_e, &neighb->wssid, node) { + used += wlp_wss_wssid_e_print(buf + used, + bufsize - used, + wssid_e); + } + buf[used++] = '\n'; + wlp_remove_neighbor_tmp_info(neighb); + } + + +out: + mutex_unlock(&wlp->nbmutex); + return used; +} + + +/** + * Show properties of all WSS in neighborhood. + * + * Will trigger a complete discovery of WSS activated by this device and + * its neighbors. + */ +ssize_t wlp_neighborhood_show(struct wlp *wlp, char *buf) +{ + wlp_discover(wlp); + return wlp_wss_neighborhood_print_remove(wlp, buf, PAGE_SIZE); +} +EXPORT_SYMBOL_GPL(wlp_neighborhood_show); + +static +ssize_t __wlp_wss_properties_show(struct wlp_wss *wss, char *buf, + size_t bufsize) +{ + ssize_t result; + + result = wlp_wss_uuid_print(buf, bufsize, &wss->wssid); + result += scnprintf(buf + result, bufsize - result, " "); + result += uwb_mac_addr_print(buf + result, bufsize - result, + &wss->bcast); + result += scnprintf(buf + result, bufsize - result, + " 0x%02x %u ", wss->hash, wss->secure_status); + result += wlp_wss_key_print(buf + result, bufsize - result, + wss->master_key); + result += scnprintf(buf + result, bufsize - result, " 0x%02x ", + wss->tag); + result += uwb_mac_addr_print(buf + result, bufsize - result, + &wss->virtual_addr); + result += scnprintf(buf + result, bufsize - result, " %s", wss->name); + result += scnprintf(buf + result, bufsize - result, + "\n\n#WSSID\n#WSS broadcast address\n" + "#WSS hash\n#WSS secure status\n" + "#WSS master key\n#WSS local tag\n" + "#WSS local virtual EUI-48\n#WSS name\n"); + return result; +} + +/** + * Show which WSS is activated. + */ +ssize_t wlp_wss_activate_show(struct wlp_wss *wss, char *buf) +{ + int result = 0; + + if (mutex_lock_interruptible(&wss->mutex)) + goto out; + if (wss->state >= WLP_WSS_STATE_ACTIVE) + result = __wlp_wss_properties_show(wss, buf, PAGE_SIZE); + else + result = scnprintf(buf, PAGE_SIZE, "No local WSS active.\n"); + result += scnprintf(buf + result, PAGE_SIZE - result, + "\n\n" + "# echo WSSID SECURE_STATUS ACCEPT_ENROLLMENT " + "NAME #create new WSS\n" + "# echo WSSID [DEV ADDR] #enroll in and activate " + "existing WSS, can request registrar\n" + "#\n" + "# WSSID is a 16 byte hex array. Eg. 12 A3 3B ... \n" + "# SECURE_STATUS 0 - unsecure, 1 - secure (default)\n" + "# ACCEPT_ENROLLMENT 0 - no, 1 - yes (default)\n" + "# NAME is the text string identifying the WSS\n" + "# DEV ADDR is the device address of neighbor " + "that should be registrar. Eg. 32:AB\n"); + + mutex_unlock(&wss->mutex); +out: + return result; + +} +EXPORT_SYMBOL_GPL(wlp_wss_activate_show); + +/** + * Create/activate a new WSS or enroll/activate in neighboring WSS + * + * The user can provide the WSSID of a WSS in which it wants to enroll. + * Only the WSSID is necessary if the WSS have been discovered before. If + * the WSS has not been discovered before, or the user wants to use a + * particular neighbor as its registrar, then the user can also provide a + * device address or the neighbor that will be used as registrar. + * + * A new WSS is created when the user provides a WSSID, secure status, and + * WSS name. + */ +ssize_t wlp_wss_activate_store(struct wlp_wss *wss, + const char *buf, size_t size) +{ + ssize_t result = -EINVAL; + struct wlp_uuid wssid; + struct uwb_dev_addr dev; + struct uwb_dev_addr bcast = {.data = {0xff, 0xff} }; + char name[65]; + unsigned sec_status, accept; + memset(name, 0, sizeof(name)); + result = sscanf(buf, "%02hhx %02hhx %02hhx %02hhx " + "%02hhx %02hhx %02hhx %02hhx " + "%02hhx %02hhx %02hhx %02hhx " + "%02hhx %02hhx %02hhx %02hhx " + "%02hhx:%02hhx", + &wssid.data[0] , &wssid.data[1], + &wssid.data[2] , &wssid.data[3], + &wssid.data[4] , &wssid.data[5], + &wssid.data[6] , &wssid.data[7], + &wssid.data[8] , &wssid.data[9], + &wssid.data[10], &wssid.data[11], + &wssid.data[12], &wssid.data[13], + &wssid.data[14], &wssid.data[15], + &dev.data[1], &dev.data[0]); + if (result == 16 || result == 17) { + result = sscanf(buf, "%02hhx %02hhx %02hhx %02hhx " + "%02hhx %02hhx %02hhx %02hhx " + "%02hhx %02hhx %02hhx %02hhx " + "%02hhx %02hhx %02hhx %02hhx " + "%u %u %64c", + &wssid.data[0] , &wssid.data[1], + &wssid.data[2] , &wssid.data[3], + &wssid.data[4] , &wssid.data[5], + &wssid.data[6] , &wssid.data[7], + &wssid.data[8] , &wssid.data[9], + &wssid.data[10], &wssid.data[11], + &wssid.data[12], &wssid.data[13], + &wssid.data[14], &wssid.data[15], + &sec_status, &accept, name); + if (result == 16) + result = wlp_wss_enroll_activate(wss, &wssid, &bcast); + else if (result == 19) { + sec_status = sec_status == 0 ? 0 : 1; + accept = accept == 0 ? 0 : 1; + /* We read name using %c, so the newline needs to be + * removed */ + if (strlen(name) != sizeof(name) - 1) + name[strlen(name) - 1] = '\0'; + result = wlp_wss_create_activate(wss, &wssid, name, + sec_status, accept); + } else + result = -EINVAL; + } else if (result == 18) + result = wlp_wss_enroll_activate(wss, &wssid, &dev); + else + result = -EINVAL; + return result < 0 ? result : size; +} +EXPORT_SYMBOL_GPL(wlp_wss_activate_store); + +/** + * Show the UUID of this host + */ +ssize_t wlp_uuid_show(struct wlp *wlp, char *buf) +{ + ssize_t result = 0; + + mutex_lock(&wlp->mutex); + result = wlp_wss_uuid_print(buf, PAGE_SIZE, &wlp->uuid); + buf[result++] = '\n'; + mutex_unlock(&wlp->mutex); + return result; +} +EXPORT_SYMBOL_GPL(wlp_uuid_show); + +/** + * Store a new UUID for this host + * + * According to the spec this should be encoded as an octet string in the + * order the octets are shown in string representation in RFC 4122 (WLP + * 0.99 [Table 6]) + * + * We do not check value provided by user. + */ +ssize_t wlp_uuid_store(struct wlp *wlp, const char *buf, size_t size) +{ + ssize_t result; + struct wlp_uuid uuid; + + mutex_lock(&wlp->mutex); + result = sscanf(buf, "%02hhx %02hhx %02hhx %02hhx " + "%02hhx %02hhx %02hhx %02hhx " + "%02hhx %02hhx %02hhx %02hhx " + "%02hhx %02hhx %02hhx %02hhx ", + &uuid.data[0] , &uuid.data[1], + &uuid.data[2] , &uuid.data[3], + &uuid.data[4] , &uuid.data[5], + &uuid.data[6] , &uuid.data[7], + &uuid.data[8] , &uuid.data[9], + &uuid.data[10], &uuid.data[11], + &uuid.data[12], &uuid.data[13], + &uuid.data[14], &uuid.data[15]); + if (result != 16) { + result = -EINVAL; + goto error; + } + wlp->uuid = uuid; +error: + mutex_unlock(&wlp->mutex); + return result < 0 ? result : size; +} +EXPORT_SYMBOL_GPL(wlp_uuid_store); + +/** + * Show contents of members of device information structure + */ +#define wlp_dev_info_show(type) \ +ssize_t wlp_dev_##type##_show(struct wlp *wlp, char *buf) \ +{ \ + ssize_t result = 0; \ + mutex_lock(&wlp->mutex); \ + if (wlp->dev_info == NULL) { \ + result = __wlp_setup_device_info(wlp); \ + if (result < 0) \ + goto out; \ + } \ + result = scnprintf(buf, PAGE_SIZE, "%s\n", wlp->dev_info->type);\ +out: \ + mutex_unlock(&wlp->mutex); \ + return result; \ +} \ +EXPORT_SYMBOL_GPL(wlp_dev_##type##_show); + +wlp_dev_info_show(name) +wlp_dev_info_show(model_name) +wlp_dev_info_show(model_nr) +wlp_dev_info_show(manufacturer) +wlp_dev_info_show(serial) + +/** + * Store contents of members of device information structure + */ +#define wlp_dev_info_store(type, len) \ +ssize_t wlp_dev_##type##_store(struct wlp *wlp, const char *buf, size_t size)\ +{ \ + ssize_t result; \ + char format[10]; \ + mutex_lock(&wlp->mutex); \ + if (wlp->dev_info == NULL) { \ + result = __wlp_alloc_device_info(wlp); \ + if (result < 0) \ + goto out; \ + } \ + memset(wlp->dev_info->type, 0, sizeof(wlp->dev_info->type)); \ + sprintf(format, "%%%uc", len); \ + result = sscanf(buf, format, wlp->dev_info->type); \ +out: \ + mutex_unlock(&wlp->mutex); \ + return result < 0 ? result : size; \ +} \ +EXPORT_SYMBOL_GPL(wlp_dev_##type##_store); + +wlp_dev_info_store(name, 32) +wlp_dev_info_store(manufacturer, 64) +wlp_dev_info_store(model_name, 32) +wlp_dev_info_store(model_nr, 32) +wlp_dev_info_store(serial, 32) + +static +const char *__wlp_dev_category[] = { + [WLP_DEV_CAT_COMPUTER] = "Computer", + [WLP_DEV_CAT_INPUT] = "Input device", + [WLP_DEV_CAT_PRINT_SCAN_FAX_COPIER] = "Printer, scanner, FAX, or " + "Copier", + [WLP_DEV_CAT_CAMERA] = "Camera", + [WLP_DEV_CAT_STORAGE] = "Storage Network", + [WLP_DEV_CAT_INFRASTRUCTURE] = "Infrastructure", + [WLP_DEV_CAT_DISPLAY] = "Display", + [WLP_DEV_CAT_MULTIM] = "Multimedia device", + [WLP_DEV_CAT_GAMING] = "Gaming device", + [WLP_DEV_CAT_TELEPHONE] = "Telephone", + [WLP_DEV_CAT_OTHER] = "Other", +}; + +static +const char *wlp_dev_category_str(unsigned cat) +{ + if ((cat >= WLP_DEV_CAT_COMPUTER && cat <= WLP_DEV_CAT_TELEPHONE) + || cat == WLP_DEV_CAT_OTHER) + return __wlp_dev_category[cat]; + return "unknown category"; +} + +ssize_t wlp_dev_prim_category_show(struct wlp *wlp, char *buf) +{ + ssize_t result = 0; + mutex_lock(&wlp->mutex); + if (wlp->dev_info == NULL) { + result = __wlp_setup_device_info(wlp); + if (result < 0) + goto out; + } + result = scnprintf(buf, PAGE_SIZE, "%s\n", + wlp_dev_category_str(wlp->dev_info->prim_dev_type.category)); +out: + mutex_unlock(&wlp->mutex); + return result; +} +EXPORT_SYMBOL_GPL(wlp_dev_prim_category_show); + +ssize_t wlp_dev_prim_category_store(struct wlp *wlp, const char *buf, + size_t size) +{ + ssize_t result; + u16 cat; + mutex_lock(&wlp->mutex); + if (wlp->dev_info == NULL) { + result = __wlp_alloc_device_info(wlp); + if (result < 0) + goto out; + } + result = sscanf(buf, "%hu", &cat); + if ((cat >= WLP_DEV_CAT_COMPUTER && cat <= WLP_DEV_CAT_TELEPHONE) + || cat == WLP_DEV_CAT_OTHER) + wlp->dev_info->prim_dev_type.category = cat; + else + result = -EINVAL; +out: + mutex_unlock(&wlp->mutex); + return result < 0 ? result : size; +} +EXPORT_SYMBOL_GPL(wlp_dev_prim_category_store); + +ssize_t wlp_dev_prim_OUI_show(struct wlp *wlp, char *buf) +{ + ssize_t result = 0; + mutex_lock(&wlp->mutex); + if (wlp->dev_info == NULL) { + result = __wlp_setup_device_info(wlp); + if (result < 0) + goto out; + } + result = scnprintf(buf, PAGE_SIZE, "%02x:%02x:%02x\n", + wlp->dev_info->prim_dev_type.OUI[0], + wlp->dev_info->prim_dev_type.OUI[1], + wlp->dev_info->prim_dev_type.OUI[2]); +out: + mutex_unlock(&wlp->mutex); + return result; +} +EXPORT_SYMBOL_GPL(wlp_dev_prim_OUI_show); + +ssize_t wlp_dev_prim_OUI_store(struct wlp *wlp, const char *buf, size_t size) +{ + ssize_t result; + u8 OUI[3]; + mutex_lock(&wlp->mutex); + if (wlp->dev_info == NULL) { + result = __wlp_alloc_device_info(wlp); + if (result < 0) + goto out; + } + result = sscanf(buf, "%hhx:%hhx:%hhx", + &OUI[0], &OUI[1], &OUI[2]); + if (result != 3) { + result = -EINVAL; + goto out; + } else + memcpy(wlp->dev_info->prim_dev_type.OUI, OUI, sizeof(OUI)); +out: + mutex_unlock(&wlp->mutex); + return result < 0 ? result : size; +} +EXPORT_SYMBOL_GPL(wlp_dev_prim_OUI_store); + + +ssize_t wlp_dev_prim_OUI_sub_show(struct wlp *wlp, char *buf) +{ + ssize_t result = 0; + mutex_lock(&wlp->mutex); + if (wlp->dev_info == NULL) { + result = __wlp_setup_device_info(wlp); + if (result < 0) + goto out; + } + result = scnprintf(buf, PAGE_SIZE, "%u\n", + wlp->dev_info->prim_dev_type.OUIsubdiv); +out: + mutex_unlock(&wlp->mutex); + return result; +} +EXPORT_SYMBOL_GPL(wlp_dev_prim_OUI_sub_show); + +ssize_t wlp_dev_prim_OUI_sub_store(struct wlp *wlp, const char *buf, + size_t size) +{ + ssize_t result; + unsigned sub; + u8 max_sub = ~0; + mutex_lock(&wlp->mutex); + if (wlp->dev_info == NULL) { + result = __wlp_alloc_device_info(wlp); + if (result < 0) + goto out; + } + result = sscanf(buf, "%u", &sub); + if (sub <= max_sub) + wlp->dev_info->prim_dev_type.OUIsubdiv = sub; + else + result = -EINVAL; +out: + mutex_unlock(&wlp->mutex); + return result < 0 ? result : size; +} +EXPORT_SYMBOL_GPL(wlp_dev_prim_OUI_sub_store); + +ssize_t wlp_dev_prim_subcat_show(struct wlp *wlp, char *buf) +{ + ssize_t result = 0; + mutex_lock(&wlp->mutex); + if (wlp->dev_info == NULL) { + result = __wlp_setup_device_info(wlp); + if (result < 0) + goto out; + } + result = scnprintf(buf, PAGE_SIZE, "%u\n", + wlp->dev_info->prim_dev_type.subID); +out: + mutex_unlock(&wlp->mutex); + return result; +} +EXPORT_SYMBOL_GPL(wlp_dev_prim_subcat_show); + +ssize_t wlp_dev_prim_subcat_store(struct wlp *wlp, const char *buf, + size_t size) +{ + ssize_t result; + unsigned sub; + __le16 max_sub = ~0; + mutex_lock(&wlp->mutex); + if (wlp->dev_info == NULL) { + result = __wlp_alloc_device_info(wlp); + if (result < 0) + goto out; + } + result = sscanf(buf, "%u", &sub); + if (sub <= max_sub) + wlp->dev_info->prim_dev_type.subID = sub; + else + result = -EINVAL; +out: + mutex_unlock(&wlp->mutex); + return result < 0 ? result : size; +} +EXPORT_SYMBOL_GPL(wlp_dev_prim_subcat_store); + +/** + * Subsystem implementation for interaction with individual WSS via sysfs + * + * Followed instructions for subsystem in Documentation/filesystems/sysfs.txt + */ + +#define kobj_to_wlp_wss(obj) container_of(obj, struct wlp_wss, kobj) +#define attr_to_wlp_wss_attr(_attr) \ + container_of(_attr, struct wlp_wss_attribute, attr) + +/** + * Sysfs subsystem: forward read calls + * + * Sysfs operation for forwarding read call to the show method of the + * attribute owner + */ +static +ssize_t wlp_wss_attr_show(struct kobject *kobj, struct attribute *attr, + char *buf) +{ + struct wlp_wss_attribute *wss_attr = attr_to_wlp_wss_attr(attr); + struct wlp_wss *wss = kobj_to_wlp_wss(kobj); + ssize_t ret = -EIO; + + if (wss_attr->show) + ret = wss_attr->show(wss, buf); + return ret; +} +/** + * Sysfs subsystem: forward write calls + * + * Sysfs operation for forwarding write call to the store method of the + * attribute owner + */ +static +ssize_t wlp_wss_attr_store(struct kobject *kobj, struct attribute *attr, + const char *buf, size_t count) +{ + struct wlp_wss_attribute *wss_attr = attr_to_wlp_wss_attr(attr); + struct wlp_wss *wss = kobj_to_wlp_wss(kobj); + ssize_t ret = -EIO; + + if (wss_attr->store) + ret = wss_attr->store(wss, buf, count); + return ret; +} + +static +struct sysfs_ops wss_sysfs_ops = { + .show = wlp_wss_attr_show, + .store = wlp_wss_attr_store, +}; + +struct kobj_type wss_ktype = { + .release = wlp_wss_release, + .sysfs_ops = &wss_sysfs_ops, +}; + + +/** + * Sysfs files for individual WSS + */ + +/** + * Print static properties of this WSS + * + * The name of a WSS may not be null teminated. It's max size is 64 bytes + * so we copy it to a larger array just to make sure we print sane data. + */ +static ssize_t wlp_wss_properties_show(struct wlp_wss *wss, char *buf) +{ + int result = 0; + + if (mutex_lock_interruptible(&wss->mutex)) + goto out; + result = __wlp_wss_properties_show(wss, buf, PAGE_SIZE); + mutex_unlock(&wss->mutex); +out: + return result; +} +WSS_ATTR(properties, S_IRUGO, wlp_wss_properties_show, NULL); + +/** + * Print all connected members of this WSS + * The EDA cache contains all members of WSS neighborhood. + */ +static ssize_t wlp_wss_members_show(struct wlp_wss *wss, char *buf) +{ + struct wlp *wlp = container_of(wss, struct wlp, wss); + return wlp_eda_show(wlp, buf); +} +WSS_ATTR(members, S_IRUGO, wlp_wss_members_show, NULL); + +static +const char *__wlp_strstate[] = { + "none", + "partially enrolled", + "enrolled", + "active", + "connected", +}; + +static const char *wlp_wss_strstate(unsigned state) +{ + if (state >= ARRAY_SIZE(__wlp_strstate)) + return "unknown state"; + return __wlp_strstate[state]; +} + +/* + * Print current state of this WSS + */ +static ssize_t wlp_wss_state_show(struct wlp_wss *wss, char *buf) +{ + int result = 0; + + if (mutex_lock_interruptible(&wss->mutex)) + goto out; + result = scnprintf(buf, PAGE_SIZE, "%s\n", + wlp_wss_strstate(wss->state)); + mutex_unlock(&wss->mutex); +out: + return result; +} +WSS_ATTR(state, S_IRUGO, wlp_wss_state_show, NULL); + + +static +struct attribute *wss_attrs[] = { + &wss_attr_properties.attr, + &wss_attr_members.attr, + &wss_attr_state.attr, + NULL, +}; + +struct attribute_group wss_attr_group = { + .name = NULL, /* we want them in the same directory */ + .attrs = wss_attrs, +}; diff --git a/drivers/uwb/wlp/txrx.c b/drivers/uwb/wlp/txrx.c new file mode 100644 index 000000000000..c701bd1a2887 --- /dev/null +++ b/drivers/uwb/wlp/txrx.c @@ -0,0 +1,374 @@ +/* + * WiMedia Logical Link Control Protocol (WLP) + * Message exchange infrastructure + * + * Copyright (C) 2007 Intel Corporation + * Reinette Chatre <reinette.chatre@intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + * + * + * FIXME: Docs + * + */ + +#include <linux/etherdevice.h> +#include <linux/wlp.h> +#define D_LOCAL 5 +#include <linux/uwb/debug.h> +#include "wlp-internal.h" + + +/** + * Direct incoming association msg to correct parsing routine + * + * We only expect D1, E1, C1, C3 messages as new. All other incoming + * association messages should form part of an established session that is + * handled elsewhere. + * The handling of these messages often require calling sleeping functions + * - this cannot be done in interrupt context. We use the kernel's + * workqueue to handle these messages. + */ +static +void wlp_direct_assoc_frame(struct wlp *wlp, struct sk_buff *skb, + struct uwb_dev_addr *src) +{ + struct device *dev = &wlp->rc->uwb_dev.dev; + struct wlp_frame_assoc *assoc = (void *) skb->data; + struct wlp_assoc_frame_ctx *frame_ctx; + d_fnstart(5, dev, "wlp %p, skb %p\n", wlp, skb); + frame_ctx = kmalloc(sizeof(*frame_ctx), GFP_ATOMIC); + if (frame_ctx == NULL) { + dev_err(dev, "WLP: Unable to allocate memory for association " + "frame handling.\n"); + kfree_skb(skb); + goto out; + } + frame_ctx->wlp = wlp; + frame_ctx->skb = skb; + frame_ctx->src = *src; + switch (assoc->type) { + case WLP_ASSOC_D1: + d_printf(5, dev, "Received a D1 frame.\n"); + INIT_WORK(&frame_ctx->ws, wlp_handle_d1_frame); + schedule_work(&frame_ctx->ws); + break; + case WLP_ASSOC_E1: + d_printf(5, dev, "Received a E1 frame. FIXME?\n"); + kfree_skb(skb); /* Temporary until we handle it */ + kfree(frame_ctx); /* Temporary until we handle it */ + break; + case WLP_ASSOC_C1: + d_printf(5, dev, "Received a C1 frame.\n"); + INIT_WORK(&frame_ctx->ws, wlp_handle_c1_frame); + schedule_work(&frame_ctx->ws); + break; + case WLP_ASSOC_C3: + d_printf(5, dev, "Received a C3 frame.\n"); + INIT_WORK(&frame_ctx->ws, wlp_handle_c3_frame); + schedule_work(&frame_ctx->ws); + break; + default: + dev_err(dev, "Received unexpected association frame. " + "Type = %d \n", assoc->type); + kfree_skb(skb); + kfree(frame_ctx); + break; + } +out: + d_fnend(5, dev, "wlp %p\n", wlp); +} + +/** + * Process incoming association frame + * + * Although it could be possible to deal with some incoming association + * messages without creating a new session we are keeping things simple. We + * do not accept new association messages if there is a session in progress + * and the messages do not belong to that session. + * + * If an association message arrives that causes the creation of a session + * (WLP_ASSOC_E1) while we are in the process of creating a session then we + * rely on the neighbor mutex to protect the data. That is, the new session + * will not be started until the previous is completed. + */ +static +void wlp_receive_assoc_frame(struct wlp *wlp, struct sk_buff *skb, + struct uwb_dev_addr *src) +{ + struct device *dev = &wlp->rc->uwb_dev.dev; + struct wlp_frame_assoc *assoc = (void *) skb->data; + struct wlp_session *session = wlp->session; + u8 version; + d_fnstart(5, dev, "wlp %p, skb %p\n", wlp, skb); + + if (wlp_get_version(wlp, &assoc->version, &version, + sizeof(assoc->version)) < 0) + goto error; + if (version != WLP_VERSION) { + dev_err(dev, "Unsupported WLP version in association " + "message.\n"); + goto error; + } + if (session != NULL) { + /* Function that created this session is still holding the + * &wlp->mutex to protect this session. */ + if (assoc->type == session->exp_message || + assoc->type == WLP_ASSOC_F0) { + if (!memcmp(&session->neighbor_addr, src, + sizeof(*src))) { + session->data = skb; + (session->cb)(wlp); + } else { + dev_err(dev, "Received expected message from " + "unexpected source. Expected message " + "%d or F0 from %02x:%02x, but received " + "it from %02x:%02x. Dropping.\n", + session->exp_message, + session->neighbor_addr.data[1], + session->neighbor_addr.data[0], + src->data[1], src->data[0]); + goto error; + } + } else { + dev_err(dev, "Association already in progress. " + "Dropping.\n"); + goto error; + } + } else { + wlp_direct_assoc_frame(wlp, skb, src); + } + d_fnend(5, dev, "wlp %p\n", wlp); + return; +error: + kfree_skb(skb); + d_fnend(5, dev, "wlp %p\n", wlp); +} + +/** + * Verify incoming frame is from connected neighbor, prep to pass to WLP client + * + * Verification proceeds according to WLP 0.99 [7.3.1]. The source address + * is used to determine which neighbor is sending the frame and the WSS tag + * is used to know to which WSS the frame belongs (we only support one WSS + * so this test is straight forward). + * With the WSS found we need to ensure that we are connected before + * allowing the exchange of data frames. + */ +static +int wlp_verify_prep_rx_frame(struct wlp *wlp, struct sk_buff *skb, + struct uwb_dev_addr *src) +{ + struct device *dev = &wlp->rc->uwb_dev.dev; + int result = -EINVAL; + struct wlp_eda_node eda_entry; + struct wlp_frame_std_abbrv_hdr *hdr = (void *) skb->data; + + d_fnstart(6, dev, "wlp %p, skb %p \n", wlp, skb); + /*verify*/ + result = wlp_copy_eda_node(&wlp->eda, src, &eda_entry); + if (result < 0) { + if (printk_ratelimit()) + dev_err(dev, "WLP: Incoming frame is from unknown " + "neighbor %02x:%02x.\n", src->data[1], + src->data[0]); + goto out; + } + if (hdr->tag != eda_entry.tag) { + if (printk_ratelimit()) + dev_err(dev, "WLP: Tag of incoming frame from " + "%02x:%02x does not match expected tag. " + "Received 0x%02x, expected 0x%02x. \n", + src->data[1], src->data[0], hdr->tag, + eda_entry.tag); + result = -EINVAL; + goto out; + } + if (eda_entry.state != WLP_WSS_CONNECTED) { + if (printk_ratelimit()) + dev_err(dev, "WLP: Incoming frame from " + "%02x:%02x does is not from connected WSS.\n", + src->data[1], src->data[0]); + result = -EINVAL; + goto out; + } + /*prep*/ + skb_pull(skb, sizeof(*hdr)); +out: + d_fnend(6, dev, "wlp %p, skb %p, result = %d \n", wlp, skb, result); + return result; +} + +/** + * Receive a WLP frame from device + * + * @returns: 1 if calling function should free the skb + * 0 if it successfully handled skb and freed it + * 0 if error occured, will free skb in this case + */ +int wlp_receive_frame(struct device *dev, struct wlp *wlp, struct sk_buff *skb, + struct uwb_dev_addr *src) +{ + unsigned len = skb->len; + void *ptr = skb->data; + struct wlp_frame_hdr *hdr; + int result = 0; + + d_fnstart(6, dev, "skb (%p), len (%u)\n", skb, len); + if (len < sizeof(*hdr)) { + dev_err(dev, "Not enough data to parse WLP header.\n"); + result = -EINVAL; + goto out; + } + hdr = ptr; + d_dump(6, dev, hdr, sizeof(*hdr)); + if (le16_to_cpu(hdr->mux_hdr) != WLP_PROTOCOL_ID) { + dev_err(dev, "Not a WLP frame type.\n"); + result = -EINVAL; + goto out; + } + switch (hdr->type) { + case WLP_FRAME_STANDARD: + if (len < sizeof(struct wlp_frame_std_abbrv_hdr)) { + dev_err(dev, "Not enough data to parse Standard " + "WLP header.\n"); + goto out; + } + result = wlp_verify_prep_rx_frame(wlp, skb, src); + if (result < 0) { + if (printk_ratelimit()) + dev_err(dev, "WLP: Verification of frame " + "from neighbor %02x:%02x failed.\n", + src->data[1], src->data[0]); + goto out; + } + result = 1; + break; + case WLP_FRAME_ABBREVIATED: + dev_err(dev, "Abbreviated frame received. FIXME?\n"); + kfree_skb(skb); + break; + case WLP_FRAME_CONTROL: + dev_err(dev, "Control frame received. FIXME?\n"); + kfree_skb(skb); + break; + case WLP_FRAME_ASSOCIATION: + if (len < sizeof(struct wlp_frame_assoc)) { + dev_err(dev, "Not enough data to parse Association " + "WLP header.\n"); + goto out; + } + d_printf(5, dev, "Association frame received.\n"); + wlp_receive_assoc_frame(wlp, skb, src); + break; + default: + dev_err(dev, "Invalid frame received.\n"); + result = -EINVAL; + break; + } +out: + if (result < 0) { + kfree_skb(skb); + result = 0; + } + d_fnend(6, dev, "skb (%p)\n", skb); + return result; +} +EXPORT_SYMBOL_GPL(wlp_receive_frame); + + +/** + * Verify frame from network stack, prepare for further transmission + * + * @skb: the socket buffer that needs to be prepared for transmission (it + * is in need of a WLP header). If this is a broadcast frame we take + * over the entire transmission. + * If it is a unicast the WSS connection should already be established + * and transmission will be done by the calling function. + * @dst: On return this will contain the device address to which the + * frame is destined. + * @returns: 0 on success no tx : WLP header sucessfully applied to skb buffer, + * calling function can proceed with tx + * 1 on success with tx : WLP will take over transmission of this + * frame + * <0 on error + * + * The network stack (WLP client) is attempting to transmit a frame. We can + * only transmit data if a local WSS is at least active (connection will be + * done here if this is a broadcast frame and neighbor also has the WSS + * active). + * + * The frame can be either broadcast or unicast. Broadcast in a WSS is + * supported via multicast, but we don't support multicast yet (until + * devices start to support MAB IEs). If a broadcast frame needs to be + * transmitted it is treated as a unicast frame to each neighbor. In this + * case the WLP takes over transmission of the skb and returns 1 + * to the caller to indicate so. Also, in this case, if a neighbor has the + * same WSS activated but is not connected then the WSS connection will be + * done at this time. The neighbor's virtual address will be learned at + * this time. + * + * The destination address in a unicast frame is the virtual address of the + * neighbor. This address only becomes known when a WSS connection is + * established. We thus rely on a broadcast frame to trigger the setup of + * WSS connections to all neighbors before we are able to send unicast + * frames to them. This seems reasonable as IP would usually use ARP first + * before any unicast frames are sent. + * + * If we are already connected to the neighbor (neighbor's virtual address + * is known) we just prepare the WLP header and the caller will continue to + * send the frame. + * + * A failure in this function usually indicates something that cannot be + * fixed automatically. So, if this function fails (@return < 0) the calling + * function should not retry to send the frame as it will very likely keep + * failing. + * + */ +int wlp_prepare_tx_frame(struct device *dev, struct wlp *wlp, + struct sk_buff *skb, struct uwb_dev_addr *dst) +{ + int result = -EINVAL; + struct ethhdr *eth_hdr = (void *) skb->data; + + d_fnstart(6, dev, "wlp (%p), skb (%p) \n", wlp, skb); + if (is_broadcast_ether_addr(eth_hdr->h_dest)) { + d_printf(6, dev, "WLP: handling broadcast frame. \n"); + result = wlp_eda_for_each(&wlp->eda, wlp_wss_send_copy, skb); + if (result < 0) { + if (printk_ratelimit()) + dev_err(dev, "Unable to handle broadcast " + "frame from WLP client.\n"); + goto out; + } + dev_kfree_skb_irq(skb); + result = 1; + /* Frame will be transmitted by WLP. */ + } else { + d_printf(6, dev, "WLP: handling unicast frame. \n"); + result = wlp_eda_for_virtual(&wlp->eda, eth_hdr->h_dest, dst, + wlp_wss_prep_hdr, skb); + if (unlikely(result < 0)) { + if (printk_ratelimit()) + dev_err(dev, "Unable to prepare " + "skb for transmission. \n"); + goto out; + } + } +out: + d_fnend(6, dev, "wlp (%p), skb (%p). result = %d \n", wlp, skb, result); + return result; +} +EXPORT_SYMBOL_GPL(wlp_prepare_tx_frame); diff --git a/drivers/uwb/wlp/wlp-internal.h b/drivers/uwb/wlp/wlp-internal.h new file mode 100644 index 000000000000..1c94fabfb1a7 --- /dev/null +++ b/drivers/uwb/wlp/wlp-internal.h @@ -0,0 +1,228 @@ +/* + * WiMedia Logical Link Control Protocol (WLP) + * Internal API + * + * Copyright (C) 2007 Intel Corporation + * Reinette Chatre <reinette.chatre@intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + * + */ + +#ifndef __WLP_INTERNAL_H__ +#define __WLP_INTERNAL_H__ + +/** + * State of WSS connection + * + * A device needs to connect to a neighbor in an activated WSS before data + * can be transmitted. The spec also distinguishes between a new connection + * attempt and a connection attempt after previous connection attempts. The + * state WLP_WSS_CONNECT_FAILED is used for this scenario. See WLP 0.99 + * [7.2.6] + */ +enum wlp_wss_connect { + WLP_WSS_UNCONNECTED = 0, + WLP_WSS_CONNECTED, + WLP_WSS_CONNECT_FAILED, +}; + +extern struct kobj_type wss_ktype; +extern struct attribute_group wss_attr_group; + +extern int uwb_rc_ie_add(struct uwb_rc *, const struct uwb_ie_hdr *, size_t); +extern int uwb_rc_ie_rm(struct uwb_rc *, enum uwb_ie); + + +/* This should be changed to a dynamic array where entries are sorted + * by eth_addr and search is done in a binary form + * + * Although thinking twice about it: this technologie's maximum reach + * is 10 meters...unless you want to pack too much stuff in around + * your radio controller/WLP device, the list will probably not be + * too big. + * + * In any case, there is probably some data structure in the kernel + * than we could reused for that already. + * + * The below structure is really just good while we support one WSS per + * host. + */ +struct wlp_eda_node { + struct list_head list_node; + unsigned char eth_addr[ETH_ALEN]; + struct uwb_dev_addr dev_addr; + struct wlp_wss *wss; + unsigned char virt_addr[ETH_ALEN]; + u8 tag; + enum wlp_wss_connect state; +}; + +typedef int (*wlp_eda_for_each_f)(struct wlp *, struct wlp_eda_node *, void *); + +extern void wlp_eda_init(struct wlp_eda *); +extern void wlp_eda_release(struct wlp_eda *); +extern int wlp_eda_create_node(struct wlp_eda *, + const unsigned char eth_addr[ETH_ALEN], + const struct uwb_dev_addr *); +extern void wlp_eda_rm_node(struct wlp_eda *, const struct uwb_dev_addr *); +extern int wlp_eda_update_node(struct wlp_eda *, + const struct uwb_dev_addr *, + struct wlp_wss *, + const unsigned char virt_addr[ETH_ALEN], + const u8, const enum wlp_wss_connect); +extern int wlp_eda_update_node_state(struct wlp_eda *, + const struct uwb_dev_addr *, + const enum wlp_wss_connect); + +extern int wlp_copy_eda_node(struct wlp_eda *, struct uwb_dev_addr *, + struct wlp_eda_node *); +extern int wlp_eda_for_each(struct wlp_eda *, wlp_eda_for_each_f , void *); +extern int wlp_eda_for_virtual(struct wlp_eda *, + const unsigned char eth_addr[ETH_ALEN], + struct uwb_dev_addr *, + wlp_eda_for_each_f , void *); + + +extern void wlp_remove_neighbor_tmp_info(struct wlp_neighbor_e *); + +extern size_t wlp_wss_key_print(char *, size_t, u8 *); + +/* Function called when no more references to WSS exists */ +extern void wlp_wss_release(struct kobject *); + +extern void wlp_wss_reset(struct wlp_wss *); +extern int wlp_wss_create_activate(struct wlp_wss *, struct wlp_uuid *, + char *, unsigned, unsigned); +extern int wlp_wss_enroll_activate(struct wlp_wss *, struct wlp_uuid *, + struct uwb_dev_addr *); +extern ssize_t wlp_discover(struct wlp *); + +extern int wlp_enroll_neighbor(struct wlp *, struct wlp_neighbor_e *, + struct wlp_wss *, struct wlp_uuid *); +extern int wlp_wss_is_active(struct wlp *, struct wlp_wss *, + struct uwb_dev_addr *); + +struct wlp_assoc_conn_ctx { + struct work_struct ws; + struct wlp *wlp; + struct sk_buff *skb; + struct wlp_eda_node eda_entry; +}; + + +extern int wlp_wss_connect_prep(struct wlp *, struct wlp_eda_node *, void *); +extern int wlp_wss_send_copy(struct wlp *, struct wlp_eda_node *, void *); + + +/* Message handling */ +struct wlp_assoc_frame_ctx { + struct work_struct ws; + struct wlp *wlp; + struct sk_buff *skb; + struct uwb_dev_addr src; +}; + +extern int wlp_wss_prep_hdr(struct wlp *, struct wlp_eda_node *, void *); +extern void wlp_handle_d1_frame(struct work_struct *); +extern int wlp_parse_d2_frame_to_cache(struct wlp *, struct sk_buff *, + struct wlp_neighbor_e *); +extern int wlp_parse_d2_frame_to_enroll(struct wlp_wss *, struct sk_buff *, + struct wlp_neighbor_e *, + struct wlp_uuid *); +extern void wlp_handle_c1_frame(struct work_struct *); +extern void wlp_handle_c3_frame(struct work_struct *); +extern int wlp_parse_c3c4_frame(struct wlp *, struct sk_buff *, + struct wlp_uuid *, u8 *, + struct uwb_mac_addr *); +extern int wlp_parse_f0(struct wlp *, struct sk_buff *); +extern int wlp_send_assoc_frame(struct wlp *, struct wlp_wss *, + struct uwb_dev_addr *, enum wlp_assoc_type); +extern ssize_t wlp_get_version(struct wlp *, struct wlp_attr_version *, + u8 *, ssize_t); +extern ssize_t wlp_get_wssid(struct wlp *, struct wlp_attr_wssid *, + struct wlp_uuid *, ssize_t); +extern int __wlp_alloc_device_info(struct wlp *); +extern int __wlp_setup_device_info(struct wlp *); + +extern struct wlp_wss_attribute wss_attribute_properties; +extern struct wlp_wss_attribute wss_attribute_members; +extern struct wlp_wss_attribute wss_attribute_state; + +static inline +size_t wlp_wss_uuid_print(char *buf, size_t bufsize, struct wlp_uuid *uuid) +{ + size_t result; + + result = scnprintf(buf, bufsize, + "%02x:%02x:%02x:%02x:%02x:%02x:" + "%02x:%02x:%02x:%02x:%02x:%02x:" + "%02x:%02x:%02x:%02x", + uuid->data[0], uuid->data[1], + uuid->data[2], uuid->data[3], + uuid->data[4], uuid->data[5], + uuid->data[6], uuid->data[7], + uuid->data[8], uuid->data[9], + uuid->data[10], uuid->data[11], + uuid->data[12], uuid->data[13], + uuid->data[14], uuid->data[15]); + return result; +} + +/** + * FIXME: How should a nonce be displayed? + */ +static inline +size_t wlp_wss_nonce_print(char *buf, size_t bufsize, struct wlp_nonce *nonce) +{ + size_t result; + + result = scnprintf(buf, bufsize, + "%02x %02x %02x %02x %02x %02x " + "%02x %02x %02x %02x %02x %02x " + "%02x %02x %02x %02x", + nonce->data[0], nonce->data[1], + nonce->data[2], nonce->data[3], + nonce->data[4], nonce->data[5], + nonce->data[6], nonce->data[7], + nonce->data[8], nonce->data[9], + nonce->data[10], nonce->data[11], + nonce->data[12], nonce->data[13], + nonce->data[14], nonce->data[15]); + return result; +} + + +static inline +void wlp_session_cb(struct wlp *wlp) +{ + struct completion *completion = wlp->session->cb_priv; + complete(completion); +} + +static inline +int wlp_uuid_is_set(struct wlp_uuid *uuid) +{ + struct wlp_uuid zero_uuid = { .data = { 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00} }; + + if (!memcmp(uuid, &zero_uuid, sizeof(*uuid))) + return 0; + return 1; +} + +#endif /* __WLP_INTERNAL_H__ */ diff --git a/drivers/uwb/wlp/wlp-lc.c b/drivers/uwb/wlp/wlp-lc.c new file mode 100644 index 000000000000..0799402e73fb --- /dev/null +++ b/drivers/uwb/wlp/wlp-lc.c @@ -0,0 +1,585 @@ +/* + * WiMedia Logical Link Control Protocol (WLP) + * + * Copyright (C) 2005-2006 Intel Corporation + * Reinette Chatre <reinette.chatre@intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + * + * + * FIXME: docs + */ + +#include <linux/wlp.h> +#define D_LOCAL 6 +#include <linux/uwb/debug.h> +#include "wlp-internal.h" + + +static +void wlp_neighbor_init(struct wlp_neighbor_e *neighbor) +{ + INIT_LIST_HEAD(&neighbor->wssid); +} + +/** + * Create area for device information storage + * + * wlp->mutex must be held + */ +int __wlp_alloc_device_info(struct wlp *wlp) +{ + struct device *dev = &wlp->rc->uwb_dev.dev; + BUG_ON(wlp->dev_info != NULL); + wlp->dev_info = kzalloc(sizeof(struct wlp_device_info), GFP_KERNEL); + if (wlp->dev_info == NULL) { + dev_err(dev, "WLP: Unable to allocate memory for " + "device information.\n"); + return -ENOMEM; + } + return 0; +} + + +/** + * Fill in device information using function provided by driver + * + * wlp->mutex must be held + */ +static +void __wlp_fill_device_info(struct wlp *wlp) +{ + struct device *dev = &wlp->rc->uwb_dev.dev; + + BUG_ON(wlp->fill_device_info == NULL); + d_printf(6, dev, "Retrieving device information " + "from device driver.\n"); + wlp->fill_device_info(wlp, wlp->dev_info); +} + +/** + * Setup device information + * + * Allocate area for device information and populate it. + * + * wlp->mutex must be held + */ +int __wlp_setup_device_info(struct wlp *wlp) +{ + int result; + struct device *dev = &wlp->rc->uwb_dev.dev; + + result = __wlp_alloc_device_info(wlp); + if (result < 0) { + dev_err(dev, "WLP: Unable to allocate area for " + "device information.\n"); + return result; + } + __wlp_fill_device_info(wlp); + return 0; +} + +/** + * Remove information about neighbor stored temporarily + * + * Information learned during discovey should only be stored when the + * device enrolls in the neighbor's WSS. We do need to store this + * information temporarily in order to present it to the user. + * + * We are only interested in keeping neighbor WSS information if that + * neighbor is accepting enrollment. + * + * should be called with wlp->nbmutex held + */ +void wlp_remove_neighbor_tmp_info(struct wlp_neighbor_e *neighbor) +{ + struct wlp_wssid_e *wssid_e, *next; + u8 keep; + if (!list_empty(&neighbor->wssid)) { + list_for_each_entry_safe(wssid_e, next, &neighbor->wssid, + node) { + if (wssid_e->info != NULL) { + keep = wssid_e->info->accept_enroll; + kfree(wssid_e->info); + wssid_e->info = NULL; + if (!keep) { + list_del(&wssid_e->node); + kfree(wssid_e); + } + } + } + } + if (neighbor->info != NULL) { + kfree(neighbor->info); + neighbor->info = NULL; + } +} + +/** + * Populate WLP neighborhood cache with neighbor information + * + * A new neighbor is found. If it is discoverable then we add it to the + * neighborhood cache. + * + */ +static +int wlp_add_neighbor(struct wlp *wlp, struct uwb_dev *dev) +{ + int result = 0; + int discoverable; + struct wlp_neighbor_e *neighbor; + + d_fnstart(6, &dev->dev, "uwb %p \n", dev); + d_printf(6, &dev->dev, "Found neighbor device %02x:%02x \n", + dev->dev_addr.data[1], dev->dev_addr.data[0]); + /** + * FIXME: + * Use contents of WLP IE found in beacon cache to determine if + * neighbor is discoverable. + * The device does not support WLP IE yet so this still needs to be + * done. Until then we assume all devices are discoverable. + */ + discoverable = 1; /* will be changed when FIXME disappears */ + if (discoverable) { + /* Add neighbor to cache for discovery */ + neighbor = kzalloc(sizeof(*neighbor), GFP_KERNEL); + if (neighbor == NULL) { + dev_err(&dev->dev, "Unable to create memory for " + "new neighbor. \n"); + result = -ENOMEM; + goto error_no_mem; + } + wlp_neighbor_init(neighbor); + uwb_dev_get(dev); + neighbor->uwb_dev = dev; + list_add(&neighbor->node, &wlp->neighbors); + } +error_no_mem: + d_fnend(6, &dev->dev, "uwb %p, result = %d \n", dev, result); + return result; +} + +/** + * Remove one neighbor from cache + */ +static +void __wlp_neighbor_release(struct wlp_neighbor_e *neighbor) +{ + struct wlp_wssid_e *wssid_e, *next_wssid_e; + + list_for_each_entry_safe(wssid_e, next_wssid_e, + &neighbor->wssid, node) { + list_del(&wssid_e->node); + kfree(wssid_e); + } + uwb_dev_put(neighbor->uwb_dev); + list_del(&neighbor->node); + kfree(neighbor); +} + +/** + * Clear entire neighborhood cache. + */ +static +void __wlp_neighbors_release(struct wlp *wlp) +{ + struct wlp_neighbor_e *neighbor, *next; + if (list_empty(&wlp->neighbors)) + return; + list_for_each_entry_safe(neighbor, next, &wlp->neighbors, node) { + __wlp_neighbor_release(neighbor); + } +} + +static +void wlp_neighbors_release(struct wlp *wlp) +{ + mutex_lock(&wlp->nbmutex); + __wlp_neighbors_release(wlp); + mutex_unlock(&wlp->nbmutex); +} + + + +/** + * Send D1 message to neighbor, receive D2 message + * + * @neighbor: neighbor to which D1 message will be sent + * @wss: if not NULL, it is an enrollment request for this WSS + * @wssid: if wss not NULL, this is the wssid of the WSS in which we + * want to enroll + * + * A D1/D2 exchange is done for one of two reasons: discovery or + * enrollment. If done for discovery the D1 message is sent to the neighbor + * and the contents of the D2 response is stored in a temporary cache. + * If done for enrollment the @wss and @wssid are provided also. In this + * case the D1 message is sent to the neighbor, the D2 response is parsed + * for enrollment of the WSS with wssid. + * + * &wss->mutex is held + */ +static +int wlp_d1d2_exchange(struct wlp *wlp, struct wlp_neighbor_e *neighbor, + struct wlp_wss *wss, struct wlp_uuid *wssid) +{ + int result; + struct device *dev = &wlp->rc->uwb_dev.dev; + DECLARE_COMPLETION_ONSTACK(completion); + struct wlp_session session; + struct sk_buff *skb; + struct wlp_frame_assoc *resp; + struct uwb_dev_addr *dev_addr = &neighbor->uwb_dev->dev_addr; + + mutex_lock(&wlp->mutex); + if (!wlp_uuid_is_set(&wlp->uuid)) { + dev_err(dev, "WLP: UUID is not set. Set via sysfs to " + "proceed.\n"); + result = -ENXIO; + goto out; + } + /* Send D1 association frame */ + result = wlp_send_assoc_frame(wlp, wss, dev_addr, WLP_ASSOC_D1); + if (result < 0) { + dev_err(dev, "Unable to send D1 frame to neighbor " + "%02x:%02x (%d)\n", dev_addr->data[1], + dev_addr->data[0], result); + d_printf(6, dev, "Add placeholders into buffer next to " + "neighbor information we have (dev address).\n"); + goto out; + } + /* Create session, wait for response */ + session.exp_message = WLP_ASSOC_D2; + session.cb = wlp_session_cb; + session.cb_priv = &completion; + session.neighbor_addr = *dev_addr; + BUG_ON(wlp->session != NULL); + wlp->session = &session; + /* Wait for D2/F0 frame */ + result = wait_for_completion_interruptible_timeout(&completion, + WLP_PER_MSG_TIMEOUT * HZ); + if (result == 0) { + result = -ETIMEDOUT; + dev_err(dev, "Timeout while sending D1 to neighbor " + "%02x:%02x.\n", dev_addr->data[1], + dev_addr->data[0]); + goto error_session; + } + if (result < 0) { + dev_err(dev, "Unable to discover/enroll neighbor %02x:%02x.\n", + dev_addr->data[1], dev_addr->data[0]); + goto error_session; + } + /* Parse message in session->data: it will be either D2 or F0 */ + skb = session.data; + resp = (void *) skb->data; + d_printf(6, dev, "Received response to D1 frame. \n"); + d_dump(6, dev, skb->data, skb->len > 72 ? 72 : skb->len); + + if (resp->type == WLP_ASSOC_F0) { + result = wlp_parse_f0(wlp, skb); + if (result < 0) + dev_err(dev, "WLP: Unable to parse F0 from neighbor " + "%02x:%02x.\n", dev_addr->data[1], + dev_addr->data[0]); + result = -EINVAL; + goto error_resp_parse; + } + if (wss == NULL) { + /* Discovery */ + result = wlp_parse_d2_frame_to_cache(wlp, skb, neighbor); + if (result < 0) { + dev_err(dev, "WLP: Unable to parse D2 message from " + "neighbor %02x:%02x for discovery.\n", + dev_addr->data[1], dev_addr->data[0]); + goto error_resp_parse; + } + } else { + /* Enrollment */ + result = wlp_parse_d2_frame_to_enroll(wss, skb, neighbor, + wssid); + if (result < 0) { + dev_err(dev, "WLP: Unable to parse D2 message from " + "neighbor %02x:%02x for enrollment.\n", + dev_addr->data[1], dev_addr->data[0]); + goto error_resp_parse; + } + } +error_resp_parse: + kfree_skb(skb); +error_session: + wlp->session = NULL; +out: + mutex_unlock(&wlp->mutex); + return result; +} + +/** + * Enroll into WSS of provided WSSID by using neighbor as registrar + * + * &wss->mutex is held + */ +int wlp_enroll_neighbor(struct wlp *wlp, struct wlp_neighbor_e *neighbor, + struct wlp_wss *wss, struct wlp_uuid *wssid) +{ + int result = 0; + struct device *dev = &wlp->rc->uwb_dev.dev; + char buf[WLP_WSS_UUID_STRSIZE]; + struct uwb_dev_addr *dev_addr = &neighbor->uwb_dev->dev_addr; + wlp_wss_uuid_print(buf, sizeof(buf), wssid); + d_fnstart(6, dev, "wlp %p, neighbor %p, wss %p, wssid %p (%s)\n", + wlp, neighbor, wss, wssid, buf); + d_printf(6, dev, "Complete me.\n"); + result = wlp_d1d2_exchange(wlp, neighbor, wss, wssid); + if (result < 0) { + dev_err(dev, "WLP: D1/D2 message exchange for enrollment " + "failed. result = %d \n", result); + goto out; + } + if (wss->state != WLP_WSS_STATE_PART_ENROLLED) { + dev_err(dev, "WLP: Unable to enroll into WSS %s using " + "neighbor %02x:%02x. \n", buf, + dev_addr->data[1], dev_addr->data[0]); + result = -EINVAL; + goto out; + } + if (wss->secure_status == WLP_WSS_SECURE) { + dev_err(dev, "FIXME: need to complete secure enrollment.\n"); + result = -EINVAL; + goto error; + } else { + wss->state = WLP_WSS_STATE_ENROLLED; + d_printf(2, dev, "WLP: Success Enrollment into unsecure WSS " + "%s using neighbor %02x:%02x. \n", buf, + dev_addr->data[1], dev_addr->data[0]); + } + + d_fnend(6, dev, "wlp %p, neighbor %p, wss %p, wssid %p (%s)\n", + wlp, neighbor, wss, wssid, buf); +out: + return result; +error: + wlp_wss_reset(wss); + return result; +} + +/** + * Discover WSS information of neighbor's active WSS + */ +static +int wlp_discover_neighbor(struct wlp *wlp, + struct wlp_neighbor_e *neighbor) +{ + return wlp_d1d2_exchange(wlp, neighbor, NULL, NULL); +} + + +/** + * Each neighbor in the neighborhood cache is discoverable. Discover it. + * + * Discovery is done through sending of D1 association frame and parsing + * the D2 association frame response. Only wssid from D2 will be included + * in neighbor cache, rest is just displayed to user and forgotten. + * + * The discovery is not done in parallel. This is simple and enables us to + * maintain only one association context. + * + * The discovery of one neighbor does not affect the other, but if the + * discovery of a neighbor fails it is removed from the neighborhood cache. + */ +static +int wlp_discover_all_neighbors(struct wlp *wlp) +{ + int result = 0; + struct device *dev = &wlp->rc->uwb_dev.dev; + struct wlp_neighbor_e *neighbor, *next; + + list_for_each_entry_safe(neighbor, next, &wlp->neighbors, node) { + result = wlp_discover_neighbor(wlp, neighbor); + if (result < 0) { + dev_err(dev, "WLP: Unable to discover neighbor " + "%02x:%02x, removing from neighborhood. \n", + neighbor->uwb_dev->dev_addr.data[1], + neighbor->uwb_dev->dev_addr.data[0]); + __wlp_neighbor_release(neighbor); + } + } + return result; +} + +static int wlp_add_neighbor_helper(struct device *dev, void *priv) +{ + struct wlp *wlp = priv; + struct uwb_dev *uwb_dev = to_uwb_dev(dev); + + return wlp_add_neighbor(wlp, uwb_dev); +} + +/** + * Discover WLP neighborhood + * + * Will send D1 association frame to all devices in beacon group that have + * discoverable bit set in WLP IE. D2 frames will be received, information + * displayed to user in @buf. Partial information (from D2 association + * frame) will be cached to assist with future association + * requests. + * + * The discovery of the WLP neighborhood is triggered by the user. This + * should occur infrequently and we thus free current cache and re-allocate + * memory if needed. + * + * If one neighbor fails during initial discovery (determining if it is a + * neighbor or not), we fail all - note that interaction with neighbor has + * not occured at this point so if a failure occurs we know something went wrong + * locally. We thus undo everything. + */ +ssize_t wlp_discover(struct wlp *wlp) +{ + int result = 0; + struct device *dev = &wlp->rc->uwb_dev.dev; + + d_fnstart(6, dev, "wlp %p \n", wlp); + mutex_lock(&wlp->nbmutex); + /* Clear current neighborhood cache. */ + __wlp_neighbors_release(wlp); + /* Determine which devices in neighborhood. Repopulate cache. */ + result = uwb_dev_for_each(wlp->rc, wlp_add_neighbor_helper, wlp); + if (result < 0) { + /* May have partial neighbor information, release all. */ + __wlp_neighbors_release(wlp); + goto error_dev_for_each; + } + /* Discover the properties of devices in neighborhood. */ + result = wlp_discover_all_neighbors(wlp); + /* In case of failure we still print our partial results. */ + if (result < 0) { + dev_err(dev, "Unable to fully discover neighborhood. \n"); + result = 0; + } +error_dev_for_each: + mutex_unlock(&wlp->nbmutex); + d_fnend(6, dev, "wlp %p \n", wlp); + return result; +} + +/** + * Handle events from UWB stack + * + * We handle events conservatively. If a neighbor goes off the air we + * remove it from the neighborhood. If an association process is in + * progress this function will block waiting for the nbmutex to become + * free. The association process will thus be allowed to complete before it + * is removed. + */ +static +void wlp_uwb_notifs_cb(void *_wlp, struct uwb_dev *uwb_dev, + enum uwb_notifs event) +{ + struct wlp *wlp = _wlp; + struct device *dev = &wlp->rc->uwb_dev.dev; + struct wlp_neighbor_e *neighbor, *next; + int result; + switch (event) { + case UWB_NOTIF_ONAIR: + d_printf(6, dev, "UWB device %02x:%02x is onair\n", + uwb_dev->dev_addr.data[1], + uwb_dev->dev_addr.data[0]); + result = wlp_eda_create_node(&wlp->eda, + uwb_dev->mac_addr.data, + &uwb_dev->dev_addr); + if (result < 0) + dev_err(dev, "WLP: Unable to add new neighbor " + "%02x:%02x to EDA cache.\n", + uwb_dev->dev_addr.data[1], + uwb_dev->dev_addr.data[0]); + break; + case UWB_NOTIF_OFFAIR: + d_printf(6, dev, "UWB device %02x:%02x is offair\n", + uwb_dev->dev_addr.data[1], + uwb_dev->dev_addr.data[0]); + wlp_eda_rm_node(&wlp->eda, &uwb_dev->dev_addr); + mutex_lock(&wlp->nbmutex); + list_for_each_entry_safe(neighbor, next, &wlp->neighbors, + node) { + if (neighbor->uwb_dev == uwb_dev) { + d_printf(6, dev, "Removing device from " + "neighborhood.\n"); + __wlp_neighbor_release(neighbor); + } + } + mutex_unlock(&wlp->nbmutex); + break; + default: + dev_err(dev, "don't know how to handle event %d from uwb\n", + event); + } +} + +int wlp_setup(struct wlp *wlp, struct uwb_rc *rc) +{ + struct device *dev = &rc->uwb_dev.dev; + int result; + + d_fnstart(6, dev, "wlp %p\n", wlp); + BUG_ON(wlp->fill_device_info == NULL); + BUG_ON(wlp->xmit_frame == NULL); + BUG_ON(wlp->stop_queue == NULL); + BUG_ON(wlp->start_queue == NULL); + wlp->rc = rc; + wlp_eda_init(&wlp->eda);/* Set up address cache */ + wlp->uwb_notifs_handler.cb = wlp_uwb_notifs_cb; + wlp->uwb_notifs_handler.data = wlp; + uwb_notifs_register(rc, &wlp->uwb_notifs_handler); + + uwb_pal_init(&wlp->pal); + result = uwb_pal_register(rc, &wlp->pal); + if (result < 0) + uwb_notifs_deregister(wlp->rc, &wlp->uwb_notifs_handler); + + d_fnend(6, dev, "wlp %p, result = %d\n", wlp, result); + return result; +} +EXPORT_SYMBOL_GPL(wlp_setup); + +void wlp_remove(struct wlp *wlp) +{ + struct device *dev = &wlp->rc->uwb_dev.dev; + d_fnstart(6, dev, "wlp %p\n", wlp); + wlp_neighbors_release(wlp); + uwb_pal_unregister(wlp->rc, &wlp->pal); + uwb_notifs_deregister(wlp->rc, &wlp->uwb_notifs_handler); + wlp_eda_release(&wlp->eda); + mutex_lock(&wlp->mutex); + if (wlp->dev_info != NULL) + kfree(wlp->dev_info); + mutex_unlock(&wlp->mutex); + wlp->rc = NULL; + /* We have to use NULL here because this function can be called + * when the device disappeared. */ + d_fnend(6, NULL, "wlp %p\n", wlp); +} +EXPORT_SYMBOL_GPL(wlp_remove); + +/** + * wlp_reset_all - reset the WLP hardware + * @wlp: the WLP device to reset. + * + * This schedules a full hardware reset of the WLP device. The radio + * controller and any other PALs will also be reset. + */ +void wlp_reset_all(struct wlp *wlp) +{ + uwb_rc_reset_all(wlp->rc); +} +EXPORT_SYMBOL_GPL(wlp_reset_all); diff --git a/drivers/uwb/wlp/wss-lc.c b/drivers/uwb/wlp/wss-lc.c new file mode 100644 index 000000000000..96b18c9bd6e9 --- /dev/null +++ b/drivers/uwb/wlp/wss-lc.c @@ -0,0 +1,1055 @@ +/* + * WiMedia Logical Link Control Protocol (WLP) + * + * Copyright (C) 2007 Intel Corporation + * Reinette Chatre <reinette.chatre@intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + * + * + * Implementation of the WLP association protocol. + * + * FIXME: Docs + * + * A UWB network interface will configure a WSS through wlp_wss_setup() after + * the interface has been assigned a MAC address, typically after + * "ifconfig" has been called. When the interface goes down it should call + * wlp_wss_remove(). + * + * When the WSS is ready for use the user interacts via sysfs to create, + * discover, and activate WSS. + * + * wlp_wss_enroll_activate() + * + * wlp_wss_create_activate() + * wlp_wss_set_wssid_hash() + * wlp_wss_comp_wssid_hash() + * wlp_wss_sel_bcast_addr() + * wlp_wss_sysfs_add() + * + * Called when no more references to WSS exist: + * wlp_wss_release() + * wlp_wss_reset() + */ + +#include <linux/etherdevice.h> /* for is_valid_ether_addr */ +#include <linux/skbuff.h> +#include <linux/wlp.h> +#define D_LOCAL 5 +#include <linux/uwb/debug.h> +#include "wlp-internal.h" + + +size_t wlp_wss_key_print(char *buf, size_t bufsize, u8 *key) +{ + size_t result; + + result = scnprintf(buf, bufsize, + "%02x %02x %02x %02x %02x %02x " + "%02x %02x %02x %02x %02x %02x " + "%02x %02x %02x %02x", + key[0], key[1], key[2], key[3], + key[4], key[5], key[6], key[7], + key[8], key[9], key[10], key[11], + key[12], key[13], key[14], key[15]); + return result; +} + +/** + * Compute WSSID hash + * WLP Draft 0.99 [7.2.1] + * + * The WSSID hash for a WSSID is the result of an octet-wise exclusive-OR + * of all octets in the WSSID. + */ +static +u8 wlp_wss_comp_wssid_hash(struct wlp_uuid *wssid) +{ + return wssid->data[0] ^ wssid->data[1] ^ wssid->data[2] + ^ wssid->data[3] ^ wssid->data[4] ^ wssid->data[5] + ^ wssid->data[6] ^ wssid->data[7] ^ wssid->data[8] + ^ wssid->data[9] ^ wssid->data[10] ^ wssid->data[11] + ^ wssid->data[12] ^ wssid->data[13] ^ wssid->data[14] + ^ wssid->data[15]; +} + +/** + * Select a multicast EUI-48 for the WSS broadcast address. + * WLP Draft 0.99 [7.2.1] + * + * Selected based on the WiMedia Alliance OUI, 00-13-88, within the WLP + * range, [01-13-88-00-01-00, 01-13-88-00-01-FF] inclusive. + * + * This address is currently hardcoded. + * FIXME? + */ +static +struct uwb_mac_addr wlp_wss_sel_bcast_addr(struct wlp_wss *wss) +{ + struct uwb_mac_addr bcast = { + .data = { 0x01, 0x13, 0x88, 0x00, 0x01, 0x00 } + }; + return bcast; +} + +/** + * Clear the contents of the WSS structure - all except kobj, mutex, virtual + * + * We do not want to reinitialize - the internal kobj should not change as + * it still points to the parent received during setup. The mutex should + * remain also. We thus just reset values individually. + * The virutal address assigned to WSS will remain the same for the + * lifetime of the WSS. We only reset the fields that can change during its + * lifetime. + */ +void wlp_wss_reset(struct wlp_wss *wss) +{ + struct wlp *wlp = container_of(wss, struct wlp, wss); + struct device *dev = &wlp->rc->uwb_dev.dev; + d_fnstart(5, dev, "wss (%p) \n", wss); + memset(&wss->wssid, 0, sizeof(wss->wssid)); + wss->hash = 0; + memset(&wss->name[0], 0, sizeof(wss->name)); + memset(&wss->bcast, 0, sizeof(wss->bcast)); + wss->secure_status = WLP_WSS_UNSECURE; + memset(&wss->master_key[0], 0, sizeof(wss->master_key)); + wss->tag = 0; + wss->state = WLP_WSS_STATE_NONE; + d_fnend(5, dev, "wss (%p) \n", wss); +} + +/** + * Create sysfs infrastructure for WSS + * + * The WSS is configured to have the interface as parent (see wlp_wss_setup()) + * a new sysfs directory that includes wssid as its name is created in the + * interface's sysfs directory. The group of files interacting with WSS are + * created also. + */ +static +int wlp_wss_sysfs_add(struct wlp_wss *wss, char *wssid_str) +{ + struct wlp *wlp = container_of(wss, struct wlp, wss); + struct device *dev = &wlp->rc->uwb_dev.dev; + int result; + + d_fnstart(5, dev, "wss (%p), wssid: %s\n", wss, wssid_str); + result = kobject_set_name(&wss->kobj, "wss-%s", wssid_str); + if (result < 0) + return result; + wss->kobj.ktype = &wss_ktype; + result = kobject_init_and_add(&wss->kobj, + &wss_ktype, wss->kobj.parent, "wlp"); + if (result < 0) { + dev_err(dev, "WLP: Cannot register WSS kobject.\n"); + goto error_kobject_register; + } + result = sysfs_create_group(&wss->kobj, &wss_attr_group); + if (result < 0) { + dev_err(dev, "WLP: Cannot register WSS attributes: %d\n", + result); + goto error_sysfs_create_group; + } + d_fnend(5, dev, "Completed. result = %d \n", result); + return 0; +error_sysfs_create_group: + + kobject_put(&wss->kobj); /* will free name if needed */ + return result; +error_kobject_register: + kfree(wss->kobj.name); + wss->kobj.name = NULL; + wss->kobj.ktype = NULL; + return result; +} + + +/** + * Release WSS + * + * No more references exist to this WSS. We should undo everything that was + * done in wlp_wss_create_activate() except removing the group. The group + * is not removed because an object can be unregistered before the group is + * created. We also undo any additional operations on the WSS after this + * (addition of members). + * + * If memory was allocated for the kobject's name then it will + * be freed by the kobject system during this time. + * + * The EDA cache is removed and reinitilized when the WSS is removed. We + * thus loose knowledge of members of this WSS at that time and need not do + * it here. + */ +void wlp_wss_release(struct kobject *kobj) +{ + struct wlp_wss *wss = container_of(kobj, struct wlp_wss, kobj); + + wlp_wss_reset(wss); +} + +/** + * Enroll into a WSS using provided neighbor as registrar + * + * First search the neighborhood information to learn which neighbor is + * referred to, next proceed with enrollment. + * + * &wss->mutex is held + */ +static +int wlp_wss_enroll_target(struct wlp_wss *wss, struct wlp_uuid *wssid, + struct uwb_dev_addr *dest) +{ + struct wlp *wlp = container_of(wss, struct wlp, wss); + struct device *dev = &wlp->rc->uwb_dev.dev; + struct wlp_neighbor_e *neighbor; + char buf[WLP_WSS_UUID_STRSIZE]; + int result = -ENXIO; + struct uwb_dev_addr *dev_addr; + + wlp_wss_uuid_print(buf, sizeof(buf), wssid); + d_fnstart(5, dev, "wss %p, wssid %s, registrar %02x:%02x \n", + wss, buf, dest->data[1], dest->data[0]); + mutex_lock(&wlp->nbmutex); + list_for_each_entry(neighbor, &wlp->neighbors, node) { + dev_addr = &neighbor->uwb_dev->dev_addr; + if (!memcmp(dest, dev_addr, sizeof(*dest))) { + d_printf(5, dev, "Neighbor %02x:%02x is valid, " + "enrolling. \n", + dev_addr->data[1], dev_addr->data[0]); + result = wlp_enroll_neighbor(wlp, neighbor, wss, + wssid); + break; + } + } + if (result == -ENXIO) + dev_err(dev, "WLP: Cannot find neighbor %02x:%02x. \n", + dest->data[1], dest->data[0]); + mutex_unlock(&wlp->nbmutex); + d_fnend(5, dev, "wss %p, wssid %s, registrar %02x:%02x, result %d \n", + wss, buf, dest->data[1], dest->data[0], result); + return result; +} + +/** + * Enroll into a WSS previously discovered + * + * User provides WSSID of WSS, search for neighbor that has this WSS + * activated and attempt to enroll. + * + * &wss->mutex is held + */ +static +int wlp_wss_enroll_discovered(struct wlp_wss *wss, struct wlp_uuid *wssid) +{ + struct wlp *wlp = container_of(wss, struct wlp, wss); + struct device *dev = &wlp->rc->uwb_dev.dev; + struct wlp_neighbor_e *neighbor; + struct wlp_wssid_e *wssid_e; + char buf[WLP_WSS_UUID_STRSIZE]; + int result = -ENXIO; + + wlp_wss_uuid_print(buf, sizeof(buf), wssid); + d_fnstart(5, dev, "wss %p, wssid %s \n", wss, buf); + mutex_lock(&wlp->nbmutex); + list_for_each_entry(neighbor, &wlp->neighbors, node) { + list_for_each_entry(wssid_e, &neighbor->wssid, node) { + if (!memcmp(wssid, &wssid_e->wssid, sizeof(*wssid))) { + d_printf(5, dev, "Found WSSID %s in neighbor " + "%02x:%02x cache. \n", buf, + neighbor->uwb_dev->dev_addr.data[1], + neighbor->uwb_dev->dev_addr.data[0]); + result = wlp_enroll_neighbor(wlp, neighbor, + wss, wssid); + if (result == 0) /* enrollment success */ + goto out; + break; + } + } + } +out: + if (result == -ENXIO) + dev_err(dev, "WLP: Cannot find WSSID %s in cache. \n", buf); + mutex_unlock(&wlp->nbmutex); + d_fnend(5, dev, "wss %p, wssid %s, result %d \n", wss, buf, result); + return result; +} + +/** + * Enroll into WSS with provided WSSID, registrar may be provided + * + * @wss: out WSS that will be enrolled + * @wssid: wssid of neighboring WSS that we want to enroll in + * @devaddr: registrar can be specified, will be broadcast (ff:ff) if any + * neighbor can be used as registrar. + * + * &wss->mutex is held + */ +static +int wlp_wss_enroll(struct wlp_wss *wss, struct wlp_uuid *wssid, + struct uwb_dev_addr *devaddr) +{ + int result; + struct wlp *wlp = container_of(wss, struct wlp, wss); + struct device *dev = &wlp->rc->uwb_dev.dev; + char buf[WLP_WSS_UUID_STRSIZE]; + struct uwb_dev_addr bcast = {.data = {0xff, 0xff} }; + + wlp_wss_uuid_print(buf, sizeof(buf), wssid); + if (wss->state != WLP_WSS_STATE_NONE) { + dev_err(dev, "WLP: Already enrolled in WSS %s.\n", buf); + result = -EEXIST; + goto error; + } + if (!memcmp(&bcast, devaddr, sizeof(bcast))) { + d_printf(5, dev, "Request to enroll in discovered WSS " + "with WSSID %s \n", buf); + result = wlp_wss_enroll_discovered(wss, wssid); + } else { + d_printf(5, dev, "Request to enroll in WSSID %s with " + "registrar %02x:%02x\n", buf, devaddr->data[1], + devaddr->data[0]); + result = wlp_wss_enroll_target(wss, wssid, devaddr); + } + if (result < 0) { + dev_err(dev, "WLP: Unable to enroll into WSS %s, result %d \n", + buf, result); + goto error; + } + d_printf(2, dev, "Successfully enrolled into WSS %s \n", buf); + result = wlp_wss_sysfs_add(wss, buf); + if (result < 0) { + dev_err(dev, "WLP: Unable to set up sysfs for WSS kobject.\n"); + wlp_wss_reset(wss); + } +error: + return result; + +} + +/** + * Activate given WSS + * + * Prior to activation a WSS must be enrolled. To activate a WSS a device + * includes the WSS hash in the WLP IE in its beacon in each superframe. + * WLP 0.99 [7.2.5]. + * + * The WSS tag is also computed at this time. We only support one activated + * WSS so we can use the hash as a tag - there will never be a conflict. + * + * We currently only support one activated WSS so only one WSS hash is + * included in the WLP IE. + */ +static +int wlp_wss_activate(struct wlp_wss *wss) +{ + struct wlp *wlp = container_of(wss, struct wlp, wss); + struct device *dev = &wlp->rc->uwb_dev.dev; + struct uwb_rc *uwb_rc = wlp->rc; + int result; + struct { + struct wlp_ie wlp_ie; + u8 hash; /* only include one hash */ + } ie_data; + + d_fnstart(5, dev, "Activating WSS %p. \n", wss); + BUG_ON(wss->state != WLP_WSS_STATE_ENROLLED); + wss->hash = wlp_wss_comp_wssid_hash(&wss->wssid); + wss->tag = wss->hash; + memset(&ie_data, 0, sizeof(ie_data)); + ie_data.wlp_ie.hdr.element_id = UWB_IE_WLP; + ie_data.wlp_ie.hdr.length = sizeof(ie_data) - sizeof(struct uwb_ie_hdr); + wlp_ie_set_hash_length(&ie_data.wlp_ie, sizeof(ie_data.hash)); + ie_data.hash = wss->hash; + result = uwb_rc_ie_add(uwb_rc, &ie_data.wlp_ie.hdr, + sizeof(ie_data)); + if (result < 0) { + dev_err(dev, "WLP: Unable to add WLP IE to beacon. " + "result = %d.\n", result); + goto error_wlp_ie; + } + wss->state = WLP_WSS_STATE_ACTIVE; + result = 0; +error_wlp_ie: + d_fnend(5, dev, "Activating WSS %p, result = %d \n", wss, result); + return result; +} + +/** + * Enroll in and activate WSS identified by provided WSSID + * + * The neighborhood cache should contain a list of all neighbors and the + * WSS they have activated. Based on that cache we search which neighbor we + * can perform the association process with. The user also has option to + * specify which neighbor it prefers as registrar. + * Successful enrollment is followed by activation. + * Successful activation will create the sysfs directory containing + * specific information regarding this WSS. + */ +int wlp_wss_enroll_activate(struct wlp_wss *wss, struct wlp_uuid *wssid, + struct uwb_dev_addr *devaddr) +{ + struct wlp *wlp = container_of(wss, struct wlp, wss); + struct device *dev = &wlp->rc->uwb_dev.dev; + int result = 0; + char buf[WLP_WSS_UUID_STRSIZE]; + + d_fnstart(5, dev, "Enrollment and activation requested. \n"); + mutex_lock(&wss->mutex); + result = wlp_wss_enroll(wss, wssid, devaddr); + if (result < 0) { + wlp_wss_uuid_print(buf, sizeof(buf), &wss->wssid); + dev_err(dev, "WLP: Enrollment into WSS %s failed.\n", buf); + goto error_enroll; + } + result = wlp_wss_activate(wss); + if (result < 0) { + dev_err(dev, "WLP: Unable to activate WSS. Undoing enrollment " + "result = %d \n", result); + /* Undo enrollment */ + wlp_wss_reset(wss); + goto error_activate; + } +error_activate: +error_enroll: + mutex_unlock(&wss->mutex); + d_fnend(5, dev, "Completed. result = %d \n", result); + return result; +} + +/** + * Create, enroll, and activate a new WSS + * + * @wssid: new wssid provided by user + * @name: WSS name requested by used. + * @sec_status: security status requested by user + * + * A user requested the creation of a new WSS. All operations are done + * locally. The new WSS will be stored locally, the hash will be included + * in the WLP IE, and the sysfs infrastructure for this WSS will be + * created. + */ +int wlp_wss_create_activate(struct wlp_wss *wss, struct wlp_uuid *wssid, + char *name, unsigned sec_status, unsigned accept) +{ + struct wlp *wlp = container_of(wss, struct wlp, wss); + struct device *dev = &wlp->rc->uwb_dev.dev; + int result = 0; + char buf[WLP_WSS_UUID_STRSIZE]; + d_fnstart(5, dev, "Request to create new WSS.\n"); + result = wlp_wss_uuid_print(buf, sizeof(buf), wssid); + d_printf(5, dev, "Request to create WSS: WSSID=%s, name=%s, " + "sec_status=%u, accepting enrollment=%u \n", + buf, name, sec_status, accept); + if (!mutex_trylock(&wss->mutex)) { + dev_err(dev, "WLP: WLP association session in progress.\n"); + return -EBUSY; + } + if (wss->state != WLP_WSS_STATE_NONE) { + dev_err(dev, "WLP: WSS already exists. Not creating new.\n"); + result = -EEXIST; + goto out; + } + if (wss->kobj.parent == NULL) { + dev_err(dev, "WLP: WSS parent not ready. Is network interface " + "up?\n"); + result = -ENXIO; + goto out; + } + if (sec_status == WLP_WSS_SECURE) { + dev_err(dev, "WLP: FIXME Creation of secure WSS not " + "supported yet.\n"); + result = -EINVAL; + goto out; + } + wss->wssid = *wssid; + memcpy(wss->name, name, sizeof(wss->name)); + wss->bcast = wlp_wss_sel_bcast_addr(wss); + wss->secure_status = sec_status; + wss->accept_enroll = accept; + /*wss->virtual_addr is initialized in call to wlp_wss_setup*/ + /* sysfs infrastructure */ + result = wlp_wss_sysfs_add(wss, buf); + if (result < 0) { + dev_err(dev, "Cannot set up sysfs for WSS kobject.\n"); + wlp_wss_reset(wss); + goto out; + } else + result = 0; + wss->state = WLP_WSS_STATE_ENROLLED; + result = wlp_wss_activate(wss); + if (result < 0) { + dev_err(dev, "WLP: Unable to activate WSS. Undoing " + "enrollment\n"); + wlp_wss_reset(wss); + goto out; + } + result = 0; +out: + mutex_unlock(&wss->mutex); + d_fnend(5, dev, "Completed. result = %d \n", result); + return result; +} + +/** + * Determine if neighbor has WSS activated + * + * @returns: 1 if neighbor has WSS activated, zero otherwise + * + * This can be done in two ways: + * - send a C1 frame, parse C2/F0 response + * - examine the WLP IE sent by the neighbor + * + * The WLP IE is not fully supported in hardware so we use the C1/C2 frame + * exchange to determine if a WSS is activated. Using the WLP IE should be + * faster and should be used when it becomes possible. + */ +int wlp_wss_is_active(struct wlp *wlp, struct wlp_wss *wss, + struct uwb_dev_addr *dev_addr) +{ + int result = 0; + struct device *dev = &wlp->rc->uwb_dev.dev; + char buf[WLP_WSS_UUID_STRSIZE]; + DECLARE_COMPLETION_ONSTACK(completion); + struct wlp_session session; + struct sk_buff *skb; + struct wlp_frame_assoc *resp; + struct wlp_uuid wssid; + + wlp_wss_uuid_print(buf, sizeof(buf), &wss->wssid); + d_fnstart(5, dev, "wlp %p, wss %p (wssid %s), neighbor %02x:%02x \n", + wlp, wss, buf, dev_addr->data[1], dev_addr->data[0]); + mutex_lock(&wlp->mutex); + /* Send C1 association frame */ + result = wlp_send_assoc_frame(wlp, wss, dev_addr, WLP_ASSOC_C1); + if (result < 0) { + dev_err(dev, "Unable to send C1 frame to neighbor " + "%02x:%02x (%d)\n", dev_addr->data[1], + dev_addr->data[0], result); + result = 0; + goto out; + } + /* Create session, wait for response */ + session.exp_message = WLP_ASSOC_C2; + session.cb = wlp_session_cb; + session.cb_priv = &completion; + session.neighbor_addr = *dev_addr; + BUG_ON(wlp->session != NULL); + wlp->session = &session; + /* Wait for C2/F0 frame */ + result = wait_for_completion_interruptible_timeout(&completion, + WLP_PER_MSG_TIMEOUT * HZ); + if (result == 0) { + dev_err(dev, "Timeout while sending C1 to neighbor " + "%02x:%02x.\n", dev_addr->data[1], + dev_addr->data[0]); + goto out; + } + if (result < 0) { + dev_err(dev, "Unable to send C1 to neighbor %02x:%02x.\n", + dev_addr->data[1], dev_addr->data[0]); + result = 0; + goto out; + } + /* Parse message in session->data: it will be either C2 or F0 */ + skb = session.data; + resp = (void *) skb->data; + d_printf(5, dev, "Received response to C1 frame. \n"); + d_dump(5, dev, skb->data, skb->len > 72 ? 72 : skb->len); + if (resp->type == WLP_ASSOC_F0) { + result = wlp_parse_f0(wlp, skb); + if (result < 0) + dev_err(dev, "WLP: unable to parse incoming F0 " + "frame from neighbor %02x:%02x.\n", + dev_addr->data[1], dev_addr->data[0]); + result = 0; + goto error_resp_parse; + } + /* WLP version and message type fields have already been parsed */ + result = wlp_get_wssid(wlp, (void *)resp + sizeof(*resp), &wssid, + skb->len - sizeof(*resp)); + if (result < 0) { + dev_err(dev, "WLP: unable to obtain WSSID from C2 frame.\n"); + result = 0; + goto error_resp_parse; + } + if (!memcmp(&wssid, &wss->wssid, sizeof(wssid))) { + d_printf(5, dev, "WSSID in C2 frame matches local " + "active WSS.\n"); + result = 1; + } else { + dev_err(dev, "WLP: Received a C2 frame without matching " + "WSSID.\n"); + result = 0; + } +error_resp_parse: + kfree_skb(skb); +out: + wlp->session = NULL; + mutex_unlock(&wlp->mutex); + d_fnend(5, dev, "wlp %p, wss %p (wssid %s), neighbor %02x:%02x \n", + wlp, wss, buf, dev_addr->data[1], dev_addr->data[0]); + return result; +} + +/** + * Activate connection with neighbor by updating EDA cache + * + * @wss: local WSS to which neighbor wants to connect + * @dev_addr: neighbor's address + * @wssid: neighbor's WSSID - must be same as our WSS's WSSID + * @tag: neighbor's WSS tag used to identify frames transmitted by it + * @virt_addr: neighbor's virtual EUI-48 + */ +static +int wlp_wss_activate_connection(struct wlp *wlp, struct wlp_wss *wss, + struct uwb_dev_addr *dev_addr, + struct wlp_uuid *wssid, u8 *tag, + struct uwb_mac_addr *virt_addr) +{ + struct device *dev = &wlp->rc->uwb_dev.dev; + int result = 0; + char buf[WLP_WSS_UUID_STRSIZE]; + wlp_wss_uuid_print(buf, sizeof(buf), wssid); + d_fnstart(5, dev, "wlp %p, wss %p, wssid %s, tag %u, virtual " + "%02x:%02x:%02x:%02x:%02x:%02x \n", wlp, wss, buf, *tag, + virt_addr->data[0], virt_addr->data[1], virt_addr->data[2], + virt_addr->data[3], virt_addr->data[4], virt_addr->data[5]); + + if (!memcmp(wssid, &wss->wssid, sizeof(*wssid))) { + d_printf(5, dev, "WSSID from neighbor frame matches local " + "active WSS.\n"); + /* Update EDA cache */ + result = wlp_eda_update_node(&wlp->eda, dev_addr, wss, + (void *) virt_addr->data, *tag, + WLP_WSS_CONNECTED); + if (result < 0) + dev_err(dev, "WLP: Unable to update EDA cache " + "with new connected neighbor information.\n"); + } else { + dev_err(dev, "WLP: Neighbor does not have matching " + "WSSID.\n"); + result = -EINVAL; + } + + d_fnend(5, dev, "wlp %p, wss %p, wssid %s, tag %u, virtual " + "%02x:%02x:%02x:%02x:%02x:%02x, result = %d \n", + wlp, wss, buf, *tag, + virt_addr->data[0], virt_addr->data[1], virt_addr->data[2], + virt_addr->data[3], virt_addr->data[4], virt_addr->data[5], + result); + + return result; +} + +/** + * Connect to WSS neighbor + * + * Use C3/C4 exchange to determine if neighbor has WSS activated and + * retrieve the WSS tag and virtual EUI-48 of the neighbor. + */ +static +int wlp_wss_connect_neighbor(struct wlp *wlp, struct wlp_wss *wss, + struct uwb_dev_addr *dev_addr) +{ + int result; + struct device *dev = &wlp->rc->uwb_dev.dev; + char buf[WLP_WSS_UUID_STRSIZE]; + struct wlp_uuid wssid; + u8 tag; + struct uwb_mac_addr virt_addr; + DECLARE_COMPLETION_ONSTACK(completion); + struct wlp_session session; + struct wlp_frame_assoc *resp; + struct sk_buff *skb; + + wlp_wss_uuid_print(buf, sizeof(buf), &wss->wssid); + d_fnstart(5, dev, "wlp %p, wss %p (wssid %s), neighbor %02x:%02x \n", + wlp, wss, buf, dev_addr->data[1], dev_addr->data[0]); + mutex_lock(&wlp->mutex); + /* Send C3 association frame */ + result = wlp_send_assoc_frame(wlp, wss, dev_addr, WLP_ASSOC_C3); + if (result < 0) { + dev_err(dev, "Unable to send C3 frame to neighbor " + "%02x:%02x (%d)\n", dev_addr->data[1], + dev_addr->data[0], result); + goto out; + } + /* Create session, wait for response */ + session.exp_message = WLP_ASSOC_C4; + session.cb = wlp_session_cb; + session.cb_priv = &completion; + session.neighbor_addr = *dev_addr; + BUG_ON(wlp->session != NULL); + wlp->session = &session; + /* Wait for C4/F0 frame */ + result = wait_for_completion_interruptible_timeout(&completion, + WLP_PER_MSG_TIMEOUT * HZ); + if (result == 0) { + dev_err(dev, "Timeout while sending C3 to neighbor " + "%02x:%02x.\n", dev_addr->data[1], + dev_addr->data[0]); + result = -ETIMEDOUT; + goto out; + } + if (result < 0) { + dev_err(dev, "Unable to send C3 to neighbor %02x:%02x.\n", + dev_addr->data[1], dev_addr->data[0]); + goto out; + } + /* Parse message in session->data: it will be either C4 or F0 */ + skb = session.data; + resp = (void *) skb->data; + d_printf(5, dev, "Received response to C3 frame. \n"); + d_dump(5, dev, skb->data, skb->len > 72 ? 72 : skb->len); + if (resp->type == WLP_ASSOC_F0) { + result = wlp_parse_f0(wlp, skb); + if (result < 0) + dev_err(dev, "WLP: unable to parse incoming F0 " + "frame from neighbor %02x:%02x.\n", + dev_addr->data[1], dev_addr->data[0]); + result = -EINVAL; + goto error_resp_parse; + } + result = wlp_parse_c3c4_frame(wlp, skb, &wssid, &tag, &virt_addr); + if (result < 0) { + dev_err(dev, "WLP: Unable to parse C4 frame from neighbor.\n"); + goto error_resp_parse; + } + result = wlp_wss_activate_connection(wlp, wss, dev_addr, &wssid, &tag, + &virt_addr); + if (result < 0) { + dev_err(dev, "WLP: Unable to activate connection to " + "neighbor %02x:%02x.\n", dev_addr->data[1], + dev_addr->data[0]); + goto error_resp_parse; + } +error_resp_parse: + kfree_skb(skb); +out: + /* Record that we unsuccessfully tried to connect to this neighbor */ + if (result < 0) + wlp_eda_update_node_state(&wlp->eda, dev_addr, + WLP_WSS_CONNECT_FAILED); + wlp->session = NULL; + mutex_unlock(&wlp->mutex); + d_fnend(5, dev, "wlp %p, wss %p (wssid %s), neighbor %02x:%02x \n", + wlp, wss, buf, dev_addr->data[1], dev_addr->data[0]); + return result; +} + +/** + * Connect to neighbor with common WSS, send pending frame + * + * This function is scheduled when a frame is destined to a neighbor with + * which we do not have a connection. A copy of the EDA cache entry is + * provided - not the actual cache entry (because it is protected by a + * spinlock). + * + * First determine if neighbor has the same WSS activated, connect if it + * does. The C3/C4 exchange is dual purpose to determine if neighbor has + * WSS activated and proceed with the connection. + * + * The frame that triggered the connection setup is sent after connection + * setup. + * + * network queue is stopped - we need to restart when done + * + */ +static +void wlp_wss_connect_send(struct work_struct *ws) +{ + struct wlp_assoc_conn_ctx *conn_ctx = container_of(ws, + struct wlp_assoc_conn_ctx, + ws); + struct wlp *wlp = conn_ctx->wlp; + struct sk_buff *skb = conn_ctx->skb; + struct wlp_eda_node *eda_entry = &conn_ctx->eda_entry; + struct uwb_dev_addr *dev_addr = &eda_entry->dev_addr; + struct wlp_wss *wss = &wlp->wss; + int result; + struct device *dev = &wlp->rc->uwb_dev.dev; + char buf[WLP_WSS_UUID_STRSIZE]; + + mutex_lock(&wss->mutex); + wlp_wss_uuid_print(buf, sizeof(buf), &wss->wssid); + d_fnstart(5, dev, "wlp %p, wss %p (wssid %s), neighbor %02x:%02x \n", + wlp, wss, buf, dev_addr->data[1], dev_addr->data[0]); + if (wss->state < WLP_WSS_STATE_ACTIVE) { + if (printk_ratelimit()) + dev_err(dev, "WLP: Attempting to connect with " + "WSS that is not active or connected.\n"); + dev_kfree_skb(skb); + goto out; + } + /* Establish connection - send C3 rcv C4 */ + result = wlp_wss_connect_neighbor(wlp, wss, dev_addr); + if (result < 0) { + if (printk_ratelimit()) + dev_err(dev, "WLP: Unable to establish connection " + "with neighbor %02x:%02x.\n", + dev_addr->data[1], dev_addr->data[0]); + dev_kfree_skb(skb); + goto out; + } + /* EDA entry changed, update the local copy being used */ + result = wlp_copy_eda_node(&wlp->eda, dev_addr, eda_entry); + if (result < 0) { + if (printk_ratelimit()) + dev_err(dev, "WLP: Cannot find EDA entry for " + "neighbor %02x:%02x \n", + dev_addr->data[1], dev_addr->data[0]); + } + result = wlp_wss_prep_hdr(wlp, eda_entry, skb); + if (result < 0) { + if (printk_ratelimit()) + dev_err(dev, "WLP: Unable to prepare frame header for " + "transmission (neighbor %02x:%02x). \n", + dev_addr->data[1], dev_addr->data[0]); + dev_kfree_skb(skb); + goto out; + } + BUG_ON(wlp->xmit_frame == NULL); + result = wlp->xmit_frame(wlp, skb, dev_addr); + if (result < 0) { + if (printk_ratelimit()) + dev_err(dev, "WLP: Unable to transmit frame: %d\n", + result); + if (result == -ENXIO) + dev_err(dev, "WLP: Is network interface up? \n"); + /* We could try again ... */ + dev_kfree_skb(skb);/*we need to free if tx fails */ + } +out: + kfree(conn_ctx); + BUG_ON(wlp->start_queue == NULL); + wlp->start_queue(wlp); + mutex_unlock(&wss->mutex); + d_fnend(5, dev, "wlp %p, wss %p (wssid %s)\n", wlp, wss, buf); +} + +/** + * Add WLP header to outgoing skb + * + * @eda_entry: pointer to neighbor's entry in the EDA cache + * @_skb: skb containing data destined to the neighbor + */ +int wlp_wss_prep_hdr(struct wlp *wlp, struct wlp_eda_node *eda_entry, + void *_skb) +{ + struct device *dev = &wlp->rc->uwb_dev.dev; + int result = 0; + unsigned char *eth_addr = eda_entry->eth_addr; + struct uwb_dev_addr *dev_addr = &eda_entry->dev_addr; + struct sk_buff *skb = _skb; + struct wlp_frame_std_abbrv_hdr *std_hdr; + + d_fnstart(6, dev, "wlp %p \n", wlp); + if (eda_entry->state == WLP_WSS_CONNECTED) { + /* Add WLP header */ + BUG_ON(skb_headroom(skb) < sizeof(*std_hdr)); + std_hdr = (void *) __skb_push(skb, sizeof(*std_hdr)); + std_hdr->hdr.mux_hdr = cpu_to_le16(WLP_PROTOCOL_ID); + std_hdr->hdr.type = WLP_FRAME_STANDARD; + std_hdr->tag = eda_entry->wss->tag; + } else { + if (printk_ratelimit()) + dev_err(dev, "WLP: Destination neighbor (Ethernet: " + "%02x:%02x:%02x:%02x:%02x:%02x, Dev: " + "%02x:%02x) is not connected. \n", eth_addr[0], + eth_addr[1], eth_addr[2], eth_addr[3], + eth_addr[4], eth_addr[5], dev_addr->data[1], + dev_addr->data[0]); + result = -EINVAL; + } + d_fnend(6, dev, "wlp %p \n", wlp); + return result; +} + + +/** + * Prepare skb for neighbor: connect if not already and prep WLP header + * + * This function is called in interrupt context, but it needs to sleep. We + * temporarily stop the net queue to establish the WLP connection. + * Setup of the WLP connection and restart of queue is scheduled + * on the default work queue. + * + * run with eda->lock held (spinlock) + */ +int wlp_wss_connect_prep(struct wlp *wlp, struct wlp_eda_node *eda_entry, + void *_skb) +{ + int result = 0; + struct device *dev = &wlp->rc->uwb_dev.dev; + struct uwb_dev_addr *dev_addr = &eda_entry->dev_addr; + unsigned char *eth_addr = eda_entry->eth_addr; + struct sk_buff *skb = _skb; + struct wlp_assoc_conn_ctx *conn_ctx; + + d_fnstart(5, dev, "wlp %p\n", wlp); + d_printf(5, dev, "To neighbor %02x:%02x with eth " + "%02x:%02x:%02x:%02x:%02x:%02x\n", dev_addr->data[1], + dev_addr->data[0], eth_addr[0], eth_addr[1], eth_addr[2], + eth_addr[3], eth_addr[4], eth_addr[5]); + if (eda_entry->state == WLP_WSS_UNCONNECTED) { + /* We don't want any more packets while we set up connection */ + BUG_ON(wlp->stop_queue == NULL); + wlp->stop_queue(wlp); + conn_ctx = kmalloc(sizeof(*conn_ctx), GFP_ATOMIC); + if (conn_ctx == NULL) { + if (printk_ratelimit()) + dev_err(dev, "WLP: Unable to allocate memory " + "for connection handling.\n"); + result = -ENOMEM; + goto out; + } + conn_ctx->wlp = wlp; + conn_ctx->skb = skb; + conn_ctx->eda_entry = *eda_entry; + INIT_WORK(&conn_ctx->ws, wlp_wss_connect_send); + schedule_work(&conn_ctx->ws); + result = 1; + } else if (eda_entry->state == WLP_WSS_CONNECT_FAILED) { + /* Previous connection attempts failed, don't retry - see + * conditions for connection in WLP 0.99 [7.6.2] */ + if (printk_ratelimit()) + dev_err(dev, "Could not connect to neighbor " + "previously. Not retrying. \n"); + result = -ENONET; + goto out; + } else { /* eda_entry->state == WLP_WSS_CONNECTED */ + d_printf(5, dev, "Neighbor is connected, preparing frame.\n"); + result = wlp_wss_prep_hdr(wlp, eda_entry, skb); + } +out: + d_fnend(5, dev, "wlp %p, result = %d \n", wlp, result); + return result; +} + +/** + * Emulate broadcast: copy skb, send copy to neighbor (connect if not already) + * + * We need to copy skbs in the case where we emulate broadcast through + * unicast. We copy instead of clone because we are modifying the data of + * the frame after copying ... clones share data so we cannot emulate + * broadcast using clones. + * + * run with eda->lock held (spinlock) + */ +int wlp_wss_send_copy(struct wlp *wlp, struct wlp_eda_node *eda_entry, + void *_skb) +{ + int result = -ENOMEM; + struct device *dev = &wlp->rc->uwb_dev.dev; + struct sk_buff *skb = _skb; + struct sk_buff *copy; + struct uwb_dev_addr *dev_addr = &eda_entry->dev_addr; + + d_fnstart(5, dev, "to neighbor %02x:%02x, skb (%p) \n", + dev_addr->data[1], dev_addr->data[0], skb); + copy = skb_copy(skb, GFP_ATOMIC); + if (copy == NULL) { + if (printk_ratelimit()) + dev_err(dev, "WLP: Unable to copy skb for " + "transmission.\n"); + goto out; + } + result = wlp_wss_connect_prep(wlp, eda_entry, copy); + if (result < 0) { + if (printk_ratelimit()) + dev_err(dev, "WLP: Unable to connect/send skb " + "to neighbor.\n"); + dev_kfree_skb_irq(copy); + goto out; + } else if (result == 1) + /* Frame will be transmitted separately */ + goto out; + BUG_ON(wlp->xmit_frame == NULL); + result = wlp->xmit_frame(wlp, copy, dev_addr); + if (result < 0) { + if (printk_ratelimit()) + dev_err(dev, "WLP: Unable to transmit frame: %d\n", + result); + if ((result == -ENXIO) && printk_ratelimit()) + dev_err(dev, "WLP: Is network interface up? \n"); + /* We could try again ... */ + dev_kfree_skb_irq(copy);/*we need to free if tx fails */ + } +out: + d_fnend(5, dev, "to neighbor %02x:%02x \n", dev_addr->data[1], + dev_addr->data[0]); + return result; +} + + +/** + * Setup WSS + * + * Should be called by network driver after the interface has been given a + * MAC address. + */ +int wlp_wss_setup(struct net_device *net_dev, struct wlp_wss *wss) +{ + struct wlp *wlp = container_of(wss, struct wlp, wss); + struct device *dev = &wlp->rc->uwb_dev.dev; + int result = 0; + d_fnstart(5, dev, "wss (%p) \n", wss); + mutex_lock(&wss->mutex); + wss->kobj.parent = &net_dev->dev.kobj; + if (!is_valid_ether_addr(net_dev->dev_addr)) { + dev_err(dev, "WLP: Invalid MAC address. Cannot use for" + "virtual.\n"); + result = -EINVAL; + goto out; + } + memcpy(wss->virtual_addr.data, net_dev->dev_addr, + sizeof(wss->virtual_addr.data)); +out: + mutex_unlock(&wss->mutex); + d_fnend(5, dev, "wss (%p) \n", wss); + return result; +} +EXPORT_SYMBOL_GPL(wlp_wss_setup); + +/** + * Remove WSS + * + * Called by client that configured WSS through wlp_wss_setup(). This + * function is called when client no longer needs WSS, eg. client shuts + * down. + * + * We remove the WLP IE from the beacon before initiating local cleanup. + */ +void wlp_wss_remove(struct wlp_wss *wss) +{ + struct wlp *wlp = container_of(wss, struct wlp, wss); + struct device *dev = &wlp->rc->uwb_dev.dev; + d_fnstart(5, dev, "wss (%p) \n", wss); + mutex_lock(&wss->mutex); + if (wss->state == WLP_WSS_STATE_ACTIVE) + uwb_rc_ie_rm(wlp->rc, UWB_IE_WLP); + if (wss->state != WLP_WSS_STATE_NONE) { + sysfs_remove_group(&wss->kobj, &wss_attr_group); + kobject_put(&wss->kobj); + } + wss->kobj.parent = NULL; + memset(&wss->virtual_addr, 0, sizeof(wss->virtual_addr)); + /* Cleanup EDA cache */ + wlp_eda_release(&wlp->eda); + wlp_eda_init(&wlp->eda); + mutex_unlock(&wss->mutex); + d_fnend(5, dev, "wss (%p) \n", wss); +} +EXPORT_SYMBOL_GPL(wlp_wss_remove); diff --git a/drivers/watchdog/w83697ug_wdt.c b/drivers/watchdog/w83697ug_wdt.c index c73b5e2919c6..ada8ad82d993 100644 --- a/drivers/watchdog/w83697ug_wdt.c +++ b/drivers/watchdog/w83697ug_wdt.c @@ -102,7 +102,7 @@ static void w83697ug_select_wd_register(void) } else { printk(KERN_ERR PFX "No W83697UG/UF could be found\n"); - return -EIO; + return; } outb_p(0x07, WDT_EFER); /* point to logical device number reg */ |