diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/net/ethernet/intel/igb/igb_main.c | 42 |
1 files changed, 32 insertions, 10 deletions
diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c index d8e3048b93dd..b5b443883da9 100644 --- a/drivers/net/ethernet/intel/igb/igb_main.c +++ b/drivers/net/ethernet/intel/igb/igb_main.c @@ -2256,6 +2256,30 @@ static void igb_enable_mas(struct igb_adapter *adapter) } } +#ifdef CONFIG_IGB_HWMON +/** + * igb_set_i2c_bb - Init I2C interface + * @hw: pointer to hardware structure + **/ +static void igb_set_i2c_bb(struct e1000_hw *hw) +{ + u32 ctrl_ext; + s32 i2cctl; + + ctrl_ext = rd32(E1000_CTRL_EXT); + ctrl_ext |= E1000_CTRL_I2C_ENA; + wr32(E1000_CTRL_EXT, ctrl_ext); + wrfl(); + + i2cctl = rd32(E1000_I2CPARAMS); + i2cctl |= E1000_I2CBB_EN + | E1000_I2C_CLK_OE_N + | E1000_I2C_DATA_OE_N; + wr32(E1000_I2CPARAMS, i2cctl); + wrfl(); +} +#endif + void igb_reset(struct igb_adapter *adapter) { struct pci_dev *pdev = adapter->pdev; @@ -2400,7 +2424,8 @@ void igb_reset(struct igb_adapter *adapter) * interface. */ if (adapter->ets) - mac->ops.init_thermal_sensor_thresh(hw); + igb_set_i2c_bb(hw); + mac->ops.init_thermal_sensor_thresh(hw); } } #endif @@ -3117,21 +3142,12 @@ static void igb_init_mas(struct igb_adapter *adapter) **/ static s32 igb_init_i2c(struct igb_adapter *adapter) { - struct e1000_hw *hw = &adapter->hw; s32 status = 0; - s32 i2cctl; /* I2C interface supported on i350 devices */ if (adapter->hw.mac.type != e1000_i350) return 0; - i2cctl = rd32(E1000_I2CPARAMS); - i2cctl |= E1000_I2CBB_EN - | E1000_I2C_CLK_OUT | E1000_I2C_CLK_OE_N - | E1000_I2C_DATA_OUT | E1000_I2C_DATA_OE_N; - wr32(E1000_I2CPARAMS, i2cctl); - wrfl(); - /* Initialize the i2c bus which is controlled by the registers. * This bus will use the i2c_algo_bit structure that implements * the protocol through toggling of the 4 bits in the register. @@ -3521,6 +3537,12 @@ static int igb_probe(struct pci_dev *pdev, const struct pci_device_id *ent) adapter->ets = true; else adapter->ets = false; + /* Only enable I2C bit banging if an external thermal + * sensor is supported. + */ + if (adapter->ets) + igb_set_i2c_bb(hw); + hw->mac.ops.init_thermal_sensor_thresh(hw); if (igb_sysfs_init(adapter)) dev_err(&pdev->dev, "failed to allocate sysfs resources\n"); |