diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/extcon/Kconfig | 7 | ||||
| -rw-r--r-- | drivers/extcon/Makefile | 1 | ||||
| -rw-r--r-- | drivers/extcon/extcon-intel-mrfld.c | 284 |
3 files changed, 292 insertions, 0 deletions
diff --git a/drivers/extcon/Kconfig b/drivers/extcon/Kconfig index 540e8cd16ee6..1ed4b45536c7 100644 --- a/drivers/extcon/Kconfig +++ b/drivers/extcon/Kconfig @@ -60,6 +60,13 @@ config EXTCON_INTEL_CHT_WC Say Y here to enable extcon support for charger detection / control on the Intel Cherrytrail Whiskey Cove PMIC. +config EXTCON_INTEL_MRFLD + tristate "Intel Merrifield Basin Cove PMIC extcon driver" + depends on INTEL_SOC_PMIC_MRFLD + help + Say Y here to enable extcon support for charger detection / control + on the Intel Merrifield Basin Cove PMIC. + config EXTCON_MAX14577 tristate "Maxim MAX14577/77836 EXTCON Support" depends on MFD_MAX14577 diff --git a/drivers/extcon/Makefile b/drivers/extcon/Makefile index 261ce4cfe209..d3941a735df3 100644 --- a/drivers/extcon/Makefile +++ b/drivers/extcon/Makefile @@ -11,6 +11,7 @@ obj-$(CONFIG_EXTCON_AXP288) += extcon-axp288.o obj-$(CONFIG_EXTCON_GPIO) += extcon-gpio.o obj-$(CONFIG_EXTCON_INTEL_INT3496) += extcon-intel-int3496.o obj-$(CONFIG_EXTCON_INTEL_CHT_WC) += extcon-intel-cht-wc.o +obj-$(CONFIG_EXTCON_INTEL_MRFLD) += extcon-intel-mrfld.o obj-$(CONFIG_EXTCON_MAX14577) += extcon-max14577.o obj-$(CONFIG_EXTCON_MAX3355) += extcon-max3355.o obj-$(CONFIG_EXTCON_MAX77693) += extcon-max77693.o diff --git a/drivers/extcon/extcon-intel-mrfld.c b/drivers/extcon/extcon-intel-mrfld.c new file mode 100644 index 000000000000..f47016fb28a8 --- /dev/null +++ b/drivers/extcon/extcon-intel-mrfld.c @@ -0,0 +1,284 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * extcon driver for Basin Cove PMIC + * + * Copyright (c) 2019, Intel Corporation. + * Author: Andy Shevchenko <andriy.shevchenko@linux.intel.com> + */ + +#include <linux/extcon-provider.h> +#include <linux/interrupt.h> +#include <linux/mfd/intel_soc_pmic.h> +#include <linux/mfd/intel_soc_pmic_mrfld.h> +#include <linux/mod_devicetable.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> + +#include "extcon-intel.h" + +#define BCOVE_USBIDCTRL 0x19 +#define BCOVE_USBIDCTRL_ID BIT(0) +#define BCOVE_USBIDCTRL_ACA BIT(1) +#define BCOVE_USBIDCTRL_ALL (BCOVE_USBIDCTRL_ID | BCOVE_USBIDCTRL_ACA) + +#define BCOVE_USBIDSTS 0x1a +#define BCOVE_USBIDSTS_GND BIT(0) +#define BCOVE_USBIDSTS_RARBRC_MASK GENMASK(2, 1) +#define BCOVE_USBIDSTS_RARBRC_SHIFT 1 +#define BCOVE_USBIDSTS_NO_ACA 0 +#define BCOVE_USBIDSTS_R_ID_A 1 +#define BCOVE_USBIDSTS_R_ID_B 2 +#define BCOVE_USBIDSTS_R_ID_C 3 +#define BCOVE_USBIDSTS_FLOAT BIT(3) +#define BCOVE_USBIDSTS_SHORT BIT(4) + +#define BCOVE_CHGRIRQ_ALL (BCOVE_CHGRIRQ_VBUSDET | BCOVE_CHGRIRQ_DCDET | \ + BCOVE_CHGRIRQ_BATTDET | BCOVE_CHGRIRQ_USBIDDET) + +#define BCOVE_CHGRCTRL0 0x4b +#define BCOVE_CHGRCTRL0_CHGRRESET BIT(0) +#define BCOVE_CHGRCTRL0_EMRGCHREN BIT(1) +#define BCOVE_CHGRCTRL0_EXTCHRDIS BIT(2) +#define BCOVE_CHGRCTRL0_SWCONTROL BIT(3) +#define BCOVE_CHGRCTRL0_TTLCK BIT(4) +#define BCOVE_CHGRCTRL0_BIT_5 BIT(5) +#define BCOVE_CHGRCTRL0_BIT_6 BIT(6) +#define BCOVE_CHGRCTRL0_CHR_WDT_NOKICK BIT(7) + +struct mrfld_extcon_data { + struct device *dev; + struct regmap *regmap; + struct extcon_dev *edev; + unsigned int status; + unsigned int id; +}; + +static const unsigned int mrfld_extcon_cable[] = { + EXTCON_USB, + EXTCON_USB_HOST, + EXTCON_CHG_USB_SDP, + EXTCON_CHG_USB_CDP, + EXTCON_CHG_USB_DCP, + EXTCON_CHG_USB_ACA, + EXTCON_NONE, +}; + +static int mrfld_extcon_clear(struct mrfld_extcon_data *data, unsigned int reg, + unsigned int mask) +{ + return regmap_update_bits(data->regmap, reg, mask, 0x00); +} + +static int mrfld_extcon_set(struct mrfld_extcon_data *data, unsigned int reg, + unsigned int mask) +{ + return regmap_update_bits(data->regmap, reg, mask, 0xff); +} + +static int mrfld_extcon_sw_control(struct mrfld_extcon_data *data, bool enable) +{ + unsigned int mask = BCOVE_CHGRCTRL0_SWCONTROL; + struct device *dev = data->dev; + int ret; + + if (enable) + ret = mrfld_extcon_set(data, BCOVE_CHGRCTRL0, mask); + else + ret = mrfld_extcon_clear(data, BCOVE_CHGRCTRL0, mask); + if (ret) + dev_err(dev, "can't set SW control: %d\n", ret); + return ret; +} + +static int mrfld_extcon_get_id(struct mrfld_extcon_data *data) +{ + struct regmap *regmap = data->regmap; + unsigned int id; + bool ground; + int ret; + + ret = regmap_read(regmap, BCOVE_USBIDSTS, &id); + if (ret) + return ret; + + if (id & BCOVE_USBIDSTS_FLOAT) + return INTEL_USB_ID_FLOAT; + + switch ((id & BCOVE_USBIDSTS_RARBRC_MASK) >> BCOVE_USBIDSTS_RARBRC_SHIFT) { + case BCOVE_USBIDSTS_R_ID_A: + return INTEL_USB_RID_A; + case BCOVE_USBIDSTS_R_ID_B: + return INTEL_USB_RID_B; + case BCOVE_USBIDSTS_R_ID_C: + return INTEL_USB_RID_C; + } + + /* + * PMIC A0 reports USBIDSTS_GND = 1 for ID_GND, + * but PMIC B0 reports USBIDSTS_GND = 0 for ID_GND. + * Thus we must check this bit at last. + */ + ground = id & BCOVE_USBIDSTS_GND; + switch ('A' + BCOVE_MAJOR(data->id)) { + case 'A': + return ground ? INTEL_USB_ID_GND : INTEL_USB_ID_FLOAT; + case 'B': + return ground ? INTEL_USB_ID_FLOAT : INTEL_USB_ID_GND; + } + + /* Unknown or unsupported type */ + return INTEL_USB_ID_FLOAT; +} + +static int mrfld_extcon_role_detect(struct mrfld_extcon_data *data) +{ + unsigned int id; + bool usb_host; + int ret; + + ret = mrfld_extcon_get_id(data); + if (ret < 0) + return ret; + + id = ret; + + usb_host = (id == INTEL_USB_ID_GND) || (id == INTEL_USB_RID_A); + extcon_set_state_sync(data->edev, EXTCON_USB_HOST, usb_host); + + return 0; +} + +static int mrfld_extcon_cable_detect(struct mrfld_extcon_data *data) +{ + struct regmap *regmap = data->regmap; + unsigned int status, change; + int ret; + + /* + * It seems SCU firmware clears the content of BCOVE_CHGRIRQ1 + * and makes it useless for OS. Instead we compare a previously + * stored status to the current one, provided by BCOVE_SCHGRIRQ1. + */ + ret = regmap_read(regmap, BCOVE_SCHGRIRQ1, &status); + if (ret) + return ret; + + change = status ^ data->status; + if (!change) + return -ENODATA; + + if (change & BCOVE_CHGRIRQ_USBIDDET) { + ret = mrfld_extcon_role_detect(data); + if (ret) + return ret; + } + + data->status = status; + + return 0; +} + +static irqreturn_t mrfld_extcon_interrupt(int irq, void *dev_id) +{ + struct mrfld_extcon_data *data = dev_id; + int ret; + + ret = mrfld_extcon_cable_detect(data); + + mrfld_extcon_clear(data, BCOVE_MIRQLVL1, BCOVE_LVL1_CHGR); + + return ret ? IRQ_NONE: IRQ_HANDLED; +} + +static int mrfld_extcon_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct intel_soc_pmic *pmic = dev_get_drvdata(dev->parent); + struct regmap *regmap = pmic->regmap; + struct mrfld_extcon_data *data; + unsigned int id; + int irq, ret; + + irq = platform_get_irq(pdev, 0); + if (irq < 0) + return irq; + + data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + data->dev = dev; + data->regmap = regmap; + + data->edev = devm_extcon_dev_allocate(dev, mrfld_extcon_cable); + if (IS_ERR(data->edev)) + return -ENOMEM; + + ret = devm_extcon_dev_register(dev, data->edev); + if (ret < 0) { + dev_err(dev, "can't register extcon device: %d\n", ret); + return ret; + } + + ret = devm_request_threaded_irq(dev, irq, NULL, mrfld_extcon_interrupt, + IRQF_ONESHOT | IRQF_SHARED, pdev->name, + data); + if (ret) { + dev_err(dev, "can't register IRQ handler: %d\n", ret); + return ret; + } + + ret = regmap_read(regmap, BCOVE_ID, &id); + if (ret) { + dev_err(dev, "can't read PMIC ID: %d\n", ret); + return ret; + } + + data->id = id; + + ret = mrfld_extcon_sw_control(data, true); + if (ret) + return ret; + + /* Get initial state */ + mrfld_extcon_role_detect(data); + + mrfld_extcon_clear(data, BCOVE_MIRQLVL1, BCOVE_LVL1_CHGR); + mrfld_extcon_clear(data, BCOVE_MCHGRIRQ1, BCOVE_CHGRIRQ_ALL); + + mrfld_extcon_set(data, BCOVE_USBIDCTRL, BCOVE_USBIDCTRL_ALL); + + platform_set_drvdata(pdev, data); + + return 0; +} + +static int mrfld_extcon_remove(struct platform_device *pdev) +{ + struct mrfld_extcon_data *data = platform_get_drvdata(pdev); + + mrfld_extcon_sw_control(data, false); + + return 0; +} + +static const struct platform_device_id mrfld_extcon_id_table[] = { + { .name = "mrfld_bcove_pwrsrc" }, + {} +}; +MODULE_DEVICE_TABLE(platform, mrfld_extcon_id_table); + +static struct platform_driver mrfld_extcon_driver = { + .driver = { + .name = "mrfld_bcove_pwrsrc", + }, + .probe = mrfld_extcon_probe, + .remove = mrfld_extcon_remove, + .id_table = mrfld_extcon_id_table, +}; +module_platform_driver(mrfld_extcon_driver); + +MODULE_AUTHOR("Andy Shevchenko <andriy.shevchenko@linux.intel.com>"); +MODULE_DESCRIPTION("extcon driver for Intel Merrifield Basin Cove PMIC"); +MODULE_LICENSE("GPL v2"); |