summaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
Diffstat (limited to 'drivers')
-rw-r--r--drivers/net/wireless/iwlwifi/iwl-agn.c133
-rw-r--r--drivers/net/wireless/iwlwifi/iwl-core.c136
-rw-r--r--drivers/net/wireless/iwlwifi/iwl-core.h1
-rw-r--r--drivers/net/wireless/iwlwifi/iwl3945-base.c106
4 files changed, 138 insertions, 238 deletions
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c
index 5cc30a223cf0..4640996aa298 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn.c
@@ -2036,139 +2036,6 @@ static int iwl_mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
return NETDEV_TX_OK;
}
-/**
- * iwl_mac_config - mac80211 config callback
- *
- * We ignore conf->flags & IEEE80211_CONF_SHORT_SLOT_TIME since it seems to
- * be set inappropriately and the driver currently sets the hardware up to
- * use it whenever needed.
- */
-static int iwl_mac_config(struct ieee80211_hw *hw, u32 changed)
-{
- struct iwl_priv *priv = hw->priv;
- const struct iwl_channel_info *ch_info;
- struct ieee80211_conf *conf = &hw->conf;
- unsigned long flags = 0;
- int ret = 0;
- u16 ch;
- int scan_active = 0;
-
- mutex_lock(&priv->mutex);
- IWL_DEBUG_MAC80211(priv, "enter to channel %d changed 0x%X\n",
- conf->channel->hw_value, changed);
-
- if (unlikely(!priv->cfg->mod_params->disable_hw_scan &&
- test_bit(STATUS_SCANNING, &priv->status))) {
- scan_active = 1;
- IWL_DEBUG_MAC80211(priv, "leave - scanning\n");
- }
-
-
- /* during scanning mac80211 will delay channel setting until
- * scan finish with changed = 0
- */
- if (!changed || (changed & IEEE80211_CONF_CHANGE_CHANNEL)) {
- if (scan_active)
- goto set_ch_out;
-
- ch = ieee80211_frequency_to_channel(conf->channel->center_freq);
- ch_info = iwl_get_channel_info(priv, conf->channel->band, ch);
- if (!is_channel_valid(ch_info)) {
- IWL_DEBUG_MAC80211(priv, "leave - invalid channel\n");
- ret = -EINVAL;
- goto set_ch_out;
- }
-
- if (priv->iw_mode == NL80211_IFTYPE_ADHOC &&
- !is_channel_ibss(ch_info)) {
- IWL_ERR(priv, "channel %d in band %d not "
- "IBSS channel\n",
- conf->channel->hw_value, conf->channel->band);
- ret = -EINVAL;
- goto set_ch_out;
- }
-
- priv->current_ht_config.is_ht = conf_is_ht(conf);
-
- spin_lock_irqsave(&priv->lock, flags);
-
-
- /* if we are switching from ht to 2.4 clear flags
- * from any ht related info since 2.4 does not
- * support ht */
- if ((le16_to_cpu(priv->staging_rxon.channel) != ch))
- priv->staging_rxon.flags = 0;
-
- iwl_set_rxon_channel(priv, conf->channel);
-
- iwl_set_flags_for_band(priv, conf->channel->band);
- spin_unlock_irqrestore(&priv->lock, flags);
- set_ch_out:
- /* The list of supported rates and rate mask can be different
- * for each band; since the band may have changed, reset
- * the rate mask to what mac80211 lists */
- iwl_set_rate(priv);
- }
-
- if (changed & IEEE80211_CONF_CHANGE_PS) {
- if (conf->flags & IEEE80211_CONF_PS)
- ret = iwl_power_set_user_mode(priv, IWL_POWER_INDEX_3);
- else
- ret = iwl_power_set_user_mode(priv, IWL_POWER_MODE_CAM);
- if (ret)
- IWL_DEBUG_MAC80211(priv, "Error setting power level\n");
-
- }
-
- if (changed & IEEE80211_CONF_CHANGE_POWER) {
- IWL_DEBUG_MAC80211(priv, "TX Power old=%d new=%d\n",
- priv->tx_power_user_lmt, conf->power_level);
-
- iwl_set_tx_power(priv, conf->power_level, false);
- }
-
- /* call to ensure that 4965 rx_chain is set properly in monitor mode */
- if (priv->cfg->ops->hcmd->set_rxon_chain)
- priv->cfg->ops->hcmd->set_rxon_chain(priv);
-
- if (changed & IEEE80211_CONF_CHANGE_RADIO_ENABLED) {
- if (conf->radio_enabled &&
- iwl_radio_kill_sw_enable_radio(priv)) {
- IWL_DEBUG_MAC80211(priv, "leave - RF-KILL - "
- "waiting for uCode\n");
- goto out;
- }
-
- if (!conf->radio_enabled)
- iwl_radio_kill_sw_disable_radio(priv);
- }
-
- if (!conf->radio_enabled) {
- IWL_DEBUG_MAC80211(priv, "leave - radio disabled\n");
- goto out;
- }
-
- if (!iwl_is_ready(priv)) {
- IWL_DEBUG_MAC80211(priv, "leave - not ready\n");
- goto out;
- }
-
- if (scan_active)
- goto out;
-
- if (memcmp(&priv->active_rxon,
- &priv->staging_rxon, sizeof(priv->staging_rxon)))
- iwlcore_commit_rxon(priv);
- else
- IWL_DEBUG_INFO(priv, "No re-sending same RXON configuration.\n");
-
-
-out:
- IWL_DEBUG_MAC80211(priv, "leave\n");
- mutex_unlock(&priv->mutex);
- return ret;
-}
-
static void iwl_config_ap(struct iwl_priv *priv)
{
int ret = 0;
diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c
index b8afd9b81fb8..4369fc8978f9 100644
--- a/drivers/net/wireless/iwlwifi/iwl-core.c
+++ b/drivers/net/wireless/iwlwifi/iwl-core.c
@@ -2443,6 +2443,142 @@ void iwl_mac_remove_interface(struct ieee80211_hw *hw,
}
EXPORT_SYMBOL(iwl_mac_remove_interface);
+/**
+ * iwl_mac_config - mac80211 config callback
+ *
+ * We ignore conf->flags & IEEE80211_CONF_SHORT_SLOT_TIME since it seems to
+ * be set inappropriately and the driver currently sets the hardware up to
+ * use it whenever needed.
+ */
+int iwl_mac_config(struct ieee80211_hw *hw, u32 changed)
+{
+ struct iwl_priv *priv = hw->priv;
+ const struct iwl_channel_info *ch_info;
+ struct ieee80211_conf *conf = &hw->conf;
+ unsigned long flags = 0;
+ int ret = 0;
+ u16 ch;
+ int scan_active = 0;
+
+ mutex_lock(&priv->mutex);
+
+ if (!iwl_is_ready(priv)) {
+ IWL_DEBUG_MAC80211(priv, "leave - not ready\n");
+ ret = -EIO;
+ goto out;
+ }
+
+ IWL_DEBUG_MAC80211(priv, "enter to channel %d changed 0x%X\n",
+ conf->channel->hw_value, changed);
+
+ if (unlikely(!priv->cfg->mod_params->disable_hw_scan &&
+ test_bit(STATUS_SCANNING, &priv->status))) {
+ scan_active = 1;
+ IWL_DEBUG_MAC80211(priv, "leave - scanning\n");
+ }
+
+
+ /* during scanning mac80211 will delay channel setting until
+ * scan finish with changed = 0
+ */
+ if (!changed || (changed & IEEE80211_CONF_CHANGE_CHANNEL)) {
+ if (scan_active)
+ goto set_ch_out;
+
+ ch = ieee80211_frequency_to_channel(conf->channel->center_freq);
+ ch_info = iwl_get_channel_info(priv, conf->channel->band, ch);
+ if (!is_channel_valid(ch_info)) {
+ IWL_DEBUG_MAC80211(priv, "leave - invalid channel\n");
+ ret = -EINVAL;
+ goto set_ch_out;
+ }
+
+ if (priv->iw_mode == NL80211_IFTYPE_ADHOC &&
+ !is_channel_ibss(ch_info)) {
+ IWL_ERR(priv, "channel %d in band %d not "
+ "IBSS channel\n",
+ conf->channel->hw_value, conf->channel->band);
+ ret = -EINVAL;
+ goto set_ch_out;
+ }
+
+ priv->current_ht_config.is_ht = conf_is_ht(conf);
+
+ spin_lock_irqsave(&priv->lock, flags);
+
+
+ /* if we are switching from ht to 2.4 clear flags
+ * from any ht related info since 2.4 does not
+ * support ht */
+ if ((le16_to_cpu(priv->staging_rxon.channel) != ch))
+ priv->staging_rxon.flags = 0;
+
+ iwl_set_rxon_channel(priv, conf->channel);
+
+ iwl_set_flags_for_band(priv, conf->channel->band);
+ spin_unlock_irqrestore(&priv->lock, flags);
+ set_ch_out:
+ /* The list of supported rates and rate mask can be different
+ * for each band; since the band may have changed, reset
+ * the rate mask to what mac80211 lists */
+ iwl_set_rate(priv);
+ }
+
+ if (changed & IEEE80211_CONF_CHANGE_PS) {
+ if (conf->flags & IEEE80211_CONF_PS)
+ ret = iwl_power_set_user_mode(priv, IWL_POWER_INDEX_3);
+ else
+ ret = iwl_power_set_user_mode(priv, IWL_POWER_MODE_CAM);
+ if (ret)
+ IWL_DEBUG_MAC80211(priv, "Error setting power level\n");
+
+ }
+
+ if (changed & IEEE80211_CONF_CHANGE_POWER) {
+ IWL_DEBUG_MAC80211(priv, "TX Power old=%d new=%d\n",
+ priv->tx_power_user_lmt, conf->power_level);
+
+ iwl_set_tx_power(priv, conf->power_level, false);
+ }
+
+ /* call to ensure that 4965 rx_chain is set properly in monitor mode */
+ if (priv->cfg->ops->hcmd->set_rxon_chain)
+ priv->cfg->ops->hcmd->set_rxon_chain(priv);
+
+ if (changed & IEEE80211_CONF_CHANGE_RADIO_ENABLED) {
+ if (conf->radio_enabled &&
+ iwl_radio_kill_sw_enable_radio(priv)) {
+ IWL_DEBUG_MAC80211(priv, "leave - RF-KILL - "
+ "waiting for uCode\n");
+ goto out;
+ }
+
+ if (!conf->radio_enabled)
+ iwl_radio_kill_sw_disable_radio(priv);
+ }
+
+ if (!conf->radio_enabled) {
+ IWL_DEBUG_MAC80211(priv, "leave - radio disabled\n");
+ goto out;
+ }
+
+ if (scan_active)
+ goto out;
+
+ if (memcmp(&priv->active_rxon,
+ &priv->staging_rxon, sizeof(priv->staging_rxon)))
+ iwlcore_commit_rxon(priv);
+ else
+ IWL_DEBUG_INFO(priv, "Not re-sending same RXON configuration.\n");
+
+
+out:
+ IWL_DEBUG_MAC80211(priv, "leave\n");
+ mutex_unlock(&priv->mutex);
+ return ret;
+}
+EXPORT_SYMBOL(iwl_mac_config);
+
#ifdef CONFIG_PM
int iwl_pci_suspend(struct pci_dev *pdev, pm_message_t state)
diff --git a/drivers/net/wireless/iwlwifi/iwl-core.h b/drivers/net/wireless/iwlwifi/iwl-core.h
index 5dc33065f0ba..da8fae52a5d6 100644
--- a/drivers/net/wireless/iwlwifi/iwl-core.h
+++ b/drivers/net/wireless/iwlwifi/iwl-core.h
@@ -278,6 +278,7 @@ int iwl_mac_add_interface(struct ieee80211_hw *hw,
struct ieee80211_if_init_conf *conf);
void iwl_mac_remove_interface(struct ieee80211_hw *hw,
struct ieee80211_if_init_conf *conf);
+int iwl_mac_config(struct ieee80211_hw *hw, u32 changed);
/*****************************************************
* RX handlers.
diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c
index f82a9dc82eef..c5644a5e50c9 100644
--- a/drivers/net/wireless/iwlwifi/iwl3945-base.c
+++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c
@@ -3166,8 +3166,6 @@ static void iwl3945_bg_rx_replenish(struct work_struct *data)
mutex_unlock(&priv->mutex);
}
-static int iwl3945_mac_config(struct ieee80211_hw *hw, u32 changed);
-
#define IWL_DELAY_NEXT_SCAN (HZ*2)
void iwl3945_post_associate(struct iwl_priv *priv)
@@ -3380,108 +3378,6 @@ static int iwl3945_mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
return NETDEV_TX_OK;
}
-/**
- * iwl3945_mac_config - mac80211 config callback
- *
- * We ignore conf->flags & IEEE80211_CONF_SHORT_SLOT_TIME since it seems to
- * be set inappropriately and the driver currently sets the hardware up to
- * use it whenever needed.
- */
-static int iwl3945_mac_config(struct ieee80211_hw *hw, u32 changed)
-{
- struct iwl_priv *priv = hw->priv;
- const struct iwl_channel_info *ch_info;
- struct ieee80211_conf *conf = &hw->conf;
- unsigned long flags;
- int ret = 0;
-
- mutex_lock(&priv->mutex);
- IWL_DEBUG_MAC80211(priv, "enter to channel %d\n",
- conf->channel->hw_value);
-
- if (!iwl_is_ready(priv)) {
- IWL_DEBUG_MAC80211(priv, "leave - not ready\n");
- ret = -EIO;
- goto out;
- }
-
- if (unlikely(!iwl3945_mod_params.disable_hw_scan &&
- test_bit(STATUS_SCANNING, &priv->status))) {
- IWL_DEBUG_MAC80211(priv, "leave - scanning\n");
- set_bit(STATUS_CONF_PENDING, &priv->status);
- mutex_unlock(&priv->mutex);
- return 0;
- }
-
- spin_lock_irqsave(&priv->lock, flags);
-
- ch_info = iwl_get_channel_info(priv, conf->channel->band,
- conf->channel->hw_value);
- if (!is_channel_valid(ch_info)) {
- IWL_DEBUG_SCAN(priv,
- "Channel %d [%d] is INVALID for this band.\n",
- conf->channel->hw_value, conf->channel->band);
- IWL_DEBUG_MAC80211(priv, "leave - invalid channel\n");
- spin_unlock_irqrestore(&priv->lock, flags);
- ret = -EINVAL;
- goto out;
- }
-
- iwl_set_rxon_channel(priv, conf->channel);
-
- iwl_set_flags_for_band(priv, conf->channel->band);
-
- /* The list of supported rates and rate mask can be different
- * for each phymode; since the phymode may have changed, reset
- * the rate mask to what mac80211 lists */
- iwl_set_rate(priv);
-
- spin_unlock_irqrestore(&priv->lock, flags);
-
-#ifdef IEEE80211_CONF_CHANNEL_SWITCH
- if (conf->flags & IEEE80211_CONF_CHANNEL_SWITCH) {
- iwl3945_hw_channel_switch(priv, conf->channel);
- goto out;
- }
-#endif
-
- if (changed & IEEE80211_CONF_CHANGE_RADIO_ENABLED) {
- if (conf->radio_enabled &&
- iwl_radio_kill_sw_enable_radio(priv)) {
- IWL_DEBUG_MAC80211(priv, "leave - RF-KILL - "
- "waiting for uCode\n");
- goto out;
- }
-
- if (!conf->radio_enabled) {
- iwl_radio_kill_sw_disable_radio(priv);
- IWL_DEBUG_MAC80211(priv, "leave - radio disabled\n");
- goto out;
- }
- }
-
- if (iwl_is_rfkill(priv)) {
- IWL_DEBUG_MAC80211(priv, "leave - RF kill\n");
- ret = -EIO;
- goto out;
- }
-
- iwl_set_rate(priv);
-
- if (memcmp(&priv->active_rxon,
- &priv->staging_rxon, sizeof(priv->staging_rxon)))
- iwlcore_commit_rxon(priv);
- else
- IWL_DEBUG_INFO(priv, "Not re-sending same RXON configuration\n");
-
- IWL_DEBUG_MAC80211(priv, "leave\n");
-
-out:
- clear_bit(STATUS_CONF_PENDING, &priv->status);
- mutex_unlock(&priv->mutex);
- return ret;
-}
-
static void iwl3945_config_ap(struct iwl_priv *priv)
{
int rc = 0;
@@ -4316,7 +4212,7 @@ static struct ieee80211_ops iwl3945_hw_ops = {
.stop = iwl3945_mac_stop,
.add_interface = iwl_mac_add_interface,
.remove_interface = iwl_mac_remove_interface,
- .config = iwl3945_mac_config,
+ .config = iwl_mac_config,
.config_interface = iwl3945_mac_config_interface,
.configure_filter = iwl_configure_filter,
.set_key = iwl3945_mac_set_key,
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-18 17:42:32 +0300