diff options
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/ntb/hw/idt/Kconfig | 1 | ||||
-rw-r--r-- | drivers/ntb/hw/idt/ntb_hw_idt.c | 182 | ||||
-rw-r--r-- | drivers/ntb/hw/idt/ntb_hw_idt.h | 24 |
3 files changed, 206 insertions, 1 deletions
diff --git a/drivers/ntb/hw/idt/Kconfig b/drivers/ntb/hw/idt/Kconfig index b360e5613b9f..2ed147368fa8 100644 --- a/drivers/ntb/hw/idt/Kconfig +++ b/drivers/ntb/hw/idt/Kconfig @@ -1,6 +1,7 @@ config NTB_IDT tristate "IDT PCIe-switch Non-Transparent Bridge support" depends on PCI + select HWMON help This driver supports NTB of cappable IDT PCIe-switches. diff --git a/drivers/ntb/hw/idt/ntb_hw_idt.c b/drivers/ntb/hw/idt/ntb_hw_idt.c index adb71f7c1043..19425a2c60cd 100644 --- a/drivers/ntb/hw/idt/ntb_hw_idt.c +++ b/drivers/ntb/hw/idt/ntb_hw_idt.c @@ -49,11 +49,14 @@ #include <linux/init.h> #include <linux/interrupt.h> #include <linux/spinlock.h> +#include <linux/mutex.h> #include <linux/pci.h> #include <linux/aer.h> #include <linux/slab.h> #include <linux/list.h> #include <linux/debugfs.h> +#include <linux/hwmon.h> +#include <linux/hwmon-sysfs.h> #include <linux/ntb.h> #include "ntb_hw_idt.h" @@ -1925,6 +1928,153 @@ static void idt_read_temp(struct idt_ntb_dev *ndev, } /* + * idt_write_temp() - write temperature to the chip sensor register + * @ntb: NTB device context. + * @type: IN - type of the temperature value to change + * @val: IN - integer value of temperature in millidegree Celsius + */ +static void idt_write_temp(struct idt_ntb_dev *ndev, + const enum idt_temp_val type, const long val) +{ + unsigned int reg; + u32 data; + u8 fmt; + + /* Retrieve the properly formatted temperature value */ + fmt = idt_temp_get_fmt(val); + + mutex_lock(&ndev->hwmon_mtx); + switch (type) { + case IDT_TEMP_LOW: + reg = IDT_SW_TMPALARM; + data = SET_FIELD(TMPALARM_LTEMP, idt_sw_read(ndev, reg), fmt) & + ~IDT_TMPALARM_IRQ_MASK; + break; + case IDT_TEMP_HIGH: + reg = IDT_SW_TMPALARM; + data = SET_FIELD(TMPALARM_HTEMP, idt_sw_read(ndev, reg), fmt) & + ~IDT_TMPALARM_IRQ_MASK; + break; + case IDT_TEMP_OFFSET: + reg = IDT_SW_TMPADJ; + data = SET_FIELD(TMPADJ_OFFSET, idt_sw_read(ndev, reg), fmt); + break; + default: + goto inval_spin_unlock; + } + + idt_sw_write(ndev, reg, data); + +inval_spin_unlock: + mutex_unlock(&ndev->hwmon_mtx); +} + +/* + * idt_sysfs_show_temp() - printout corresponding temperature value + * @dev: Pointer to the NTB device structure + * @da: Sensor device attribute structure + * @buf: Buffer to print temperature out + * + * Return: Number of written symbols or negative error + */ +static ssize_t idt_sysfs_show_temp(struct device *dev, + struct device_attribute *da, char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct idt_ntb_dev *ndev = dev_get_drvdata(dev); + enum idt_temp_val type = attr->index; + long mdeg; + + idt_read_temp(ndev, type, &mdeg); + return sprintf(buf, "%ld\n", mdeg); +} + +/* + * idt_sysfs_set_temp() - set corresponding temperature value + * @dev: Pointer to the NTB device structure + * @da: Sensor device attribute structure + * @buf: Buffer to print temperature out + * @count: Size of the passed buffer + * + * Return: Number of written symbols or negative error + */ +static ssize_t idt_sysfs_set_temp(struct device *dev, + struct device_attribute *da, const char *buf, + size_t count) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(da); + struct idt_ntb_dev *ndev = dev_get_drvdata(dev); + enum idt_temp_val type = attr->index; + long mdeg; + int ret; + + ret = kstrtol(buf, 10, &mdeg); + if (ret) + return ret; + + /* Clamp the passed value in accordance with the type */ + if (type == IDT_TEMP_OFFSET) + mdeg = clamp_val(mdeg, IDT_TEMP_MIN_OFFSET, + IDT_TEMP_MAX_OFFSET); + else + mdeg = clamp_val(mdeg, IDT_TEMP_MIN_MDEG, IDT_TEMP_MAX_MDEG); + + idt_write_temp(ndev, type, mdeg); + + return count; +} + +/* + * idt_sysfs_reset_hist() - reset temperature history + * @dev: Pointer to the NTB device structure + * @da: Sensor device attribute structure + * @buf: Buffer to print temperature out + * @count: Size of the passed buffer + * + * Return: Number of written symbols or negative error + */ +static ssize_t idt_sysfs_reset_hist(struct device *dev, + struct device_attribute *da, + const char *buf, size_t count) +{ + struct idt_ntb_dev *ndev = dev_get_drvdata(dev); + + /* Just set the maximal value to the lowest temperature field and + * minimal value to the highest temperature field + */ + idt_write_temp(ndev, IDT_TEMP_LOW, IDT_TEMP_MAX_MDEG); + idt_write_temp(ndev, IDT_TEMP_HIGH, IDT_TEMP_MIN_MDEG); + + return count; +} + +/* + * Hwmon IDT sysfs attributes + */ +static SENSOR_DEVICE_ATTR(temp1_input, 0444, idt_sysfs_show_temp, NULL, + IDT_TEMP_CUR); +static SENSOR_DEVICE_ATTR(temp1_lowest, 0444, idt_sysfs_show_temp, NULL, + IDT_TEMP_LOW); +static SENSOR_DEVICE_ATTR(temp1_highest, 0444, idt_sysfs_show_temp, NULL, + IDT_TEMP_HIGH); +static SENSOR_DEVICE_ATTR(temp1_offset, 0644, idt_sysfs_show_temp, + idt_sysfs_set_temp, IDT_TEMP_OFFSET); +static DEVICE_ATTR(temp1_reset_history, 0200, NULL, idt_sysfs_reset_hist); + +/* + * Hwmon IDT sysfs attributes group + */ +static struct attribute *idt_temp_attrs[] = { + &sensor_dev_attr_temp1_input.dev_attr.attr, + &sensor_dev_attr_temp1_lowest.dev_attr.attr, + &sensor_dev_attr_temp1_highest.dev_attr.attr, + &sensor_dev_attr_temp1_offset.dev_attr.attr, + &dev_attr_temp1_reset_history.attr, + NULL +}; +ATTRIBUTE_GROUPS(idt_temp); + +/* * idt_temp_isr() - temperature sensor alarm events ISR * @ndev: IDT NTB hardware driver descriptor * @ntint_sts: NT-function interrupt status @@ -1956,6 +2106,35 @@ static void idt_temp_isr(struct idt_ntb_dev *ndev, u32 ntint_sts) idt_get_deg(mdeg), idt_get_deg_frac(mdeg)); } +/* + * idt_init_temp() - initialize temperature sensor interface + * @ndev: IDT NTB hardware driver descriptor + * + * Simple sensor initializarion method is responsible for device switching + * on and resource management based hwmon interface registration. Note, that + * since the device is shared we won't disable it on remove, but leave it + * working until the system is powered off. + */ +static void idt_init_temp(struct idt_ntb_dev *ndev) +{ + struct device *hwmon; + + /* Enable sensor if it hasn't been already */ + idt_sw_write(ndev, IDT_SW_TMPCTL, 0x0); + + /* Initialize hwmon interface fields */ + mutex_init(&ndev->hwmon_mtx); + + hwmon = devm_hwmon_device_register_with_groups(&ndev->ntb.pdev->dev, + ndev->swcfg->name, ndev, idt_temp_groups); + if (IS_ERR(hwmon)) { + dev_err(&ndev->ntb.pdev->dev, "Couldn't create hwmon device"); + return; + } + + dev_dbg(&ndev->ntb.pdev->dev, "Temperature HWmon interface registered"); +} + /*============================================================================= * 8. ISRs related operations * @@ -2650,6 +2829,9 @@ static int idt_pci_probe(struct pci_dev *pdev, /* Initialize Messaging subsystem */ idt_init_msg(ndev); + /* Initialize hwmon interface */ + idt_init_temp(ndev); + /* Initialize IDT interrupts handler */ ret = idt_init_isr(ndev); if (ret != 0) diff --git a/drivers/ntb/hw/idt/ntb_hw_idt.h b/drivers/ntb/hw/idt/ntb_hw_idt.h index 9dfd6b11a621..032f81cb4d44 100644 --- a/drivers/ntb/hw/idt/ntb_hw_idt.h +++ b/drivers/ntb/hw/idt/ntb_hw_idt.h @@ -47,9 +47,9 @@ #include <linux/pci_ids.h> #include <linux/interrupt.h> #include <linux/spinlock.h> +#include <linux/mutex.h> #include <linux/ntb.h> - /* * Macro is used to create the struct pci_device_id that matches * the supported IDT PCIe-switches @@ -907,6 +907,10 @@ * TMPSTS register fields related constants * @IDT_TMPSTS_TEMP_MASK: Current temperature field mask * @IDT_TMPSTS_TEMP_FLD: Current temperature field offset + * @IDT_TMPSTS_LTEMP_MASK: Lowest temperature field mask + * @IDT_TMPSTS_LTEMP_FLD: Lowest temperature field offset + * @IDT_TMPSTS_HTEMP_MASK: Highest temperature field mask + * @IDT_TMPSTS_HTEMP_FLD: Highest temperature field offset */ #define IDT_TMPSTS_TEMP_MASK 0x000000FFU #define IDT_TMPSTS_TEMP_FLD 0 @@ -916,6 +920,20 @@ #define IDT_TMPSTS_HTEMP_FLD 16 /* + * TMPALARM register fields related constants + * @IDT_TMPALARM_LTEMP_MASK: Lowest temperature field mask + * @IDT_TMPALARM_LTEMP_FLD: Lowest temperature field offset + * @IDT_TMPALARM_HTEMP_MASK: Highest temperature field mask + * @IDT_TMPALARM_HTEMP_FLD: Highest temperature field offset + * @IDT_TMPALARM_IRQ_MASK: Alarm IRQ status mask + */ +#define IDT_TMPALARM_LTEMP_MASK 0x0000FF00U +#define IDT_TMPALARM_LTEMP_FLD 8 +#define IDT_TMPALARM_HTEMP_MASK 0x00FF0000U +#define IDT_TMPALARM_HTEMP_FLD 16 +#define IDT_TMPALARM_IRQ_MASK 0x3F000000U + +/* * TMPADJ register fields related constants * @IDT_TMPADJ_OFFSET_MASK: Temperature value offset field mask * @IDT_TMPADJ_OFFSET_FLD: Temperature value offset field offset @@ -1100,6 +1118,8 @@ struct idt_ntb_peer { * @msg_mask_lock: Message mask register lock * @gasa_lock: GASA registers access lock * + * @hwmon_mtx: Temperature sensor interface update mutex + * * @dbgfs_info: DebugFS info node */ struct idt_ntb_dev { @@ -1127,6 +1147,8 @@ struct idt_ntb_dev { spinlock_t msg_mask_lock; spinlock_t gasa_lock; + struct mutex hwmon_mtx; + struct dentry *dbgfs_info; }; #define to_ndev_ntb(__ntb) container_of(__ntb, struct idt_ntb_dev, ntb) |