diff options
Diffstat (limited to 'drivers/video/fbdev/auo_k1901fb.c')
| -rw-r--r-- | drivers/video/fbdev/auo_k1901fb.c | 257 |
1 files changed, 0 insertions, 257 deletions
diff --git a/drivers/video/fbdev/auo_k1901fb.c b/drivers/video/fbdev/auo_k1901fb.c deleted file mode 100644 index 681fe61957b6..000000000000 --- a/drivers/video/fbdev/auo_k1901fb.c +++ /dev/null @@ -1,257 +0,0 @@ -/* - * auok190xfb.c -- FB driver for AUO-K1901 controllers - * - * Copyright (C) 2011, 2012 Heiko Stuebner <heiko@sntech.de> - * - * based on broadsheetfb.c - * - * Copyright (C) 2008, Jaya Kumar - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Layout is based on skeletonfb.c by James Simmons and Geert Uytterhoeven. - * - * This driver is written to be used with the AUO-K1901 display controller. - * - * It is intended to be architecture independent. A board specific driver - * must be used to perform all the physical IO interactions. - * - * The controller supports different update modes: - * mode0+1 16 step gray (4bit) - * mode2+3 4 step gray (2bit) - * mode4+5 2 step gray (1bit) - * - mode4 is described as "without LUT" - * mode7 automatic selection of update mode - * - * The most interesting difference to the K1900 is the ability to do screen - * updates in an asynchronous fashion. Where the K1900 needs to wait for the - * current update to complete, the K1901 can process later updates already. - */ - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/errno.h> -#include <linux/string.h> -#include <linux/mm.h> -#include <linux/slab.h> -#include <linux/delay.h> -#include <linux/interrupt.h> -#include <linux/fb.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/list.h> -#include <linux/firmware.h> -#include <linux/gpio.h> -#include <linux/pm_runtime.h> - -#include <video/auo_k190xfb.h> - -#include "auo_k190x.h" - -/* - * AUO-K1901 specific commands - */ - -#define AUOK1901_CMD_LUT_INTERFACE 0x0005 -#define AUOK1901_CMD_DMA_START 0x1001 -#define AUOK1901_CMD_CURSOR_START 0x1007 -#define AUOK1901_CMD_CURSOR_STOP AUOK190X_CMD_DATA_STOP -#define AUOK1901_CMD_DDMA_START 0x1009 - -#define AUOK1901_INIT_GATE_PULSE_LOW (0 << 14) -#define AUOK1901_INIT_GATE_PULSE_HIGH (1 << 14) -#define AUOK1901_INIT_SINGLE_GATE (0 << 13) -#define AUOK1901_INIT_DOUBLE_GATE (1 << 13) - -/* Bits to pixels - * Mode 15-12 11-8 7-4 3-0 - * format2 2 T 1 T - * format3 1 T 2 T - * format4 T 2 T 1 - * format5 T 1 T 2 - * - * halftone modes: - * format6 2 2 1 1 - * format7 1 1 2 2 - */ -#define AUOK1901_INIT_FORMAT2 (1 << 7) -#define AUOK1901_INIT_FORMAT3 ((1 << 7) | (1 << 6)) -#define AUOK1901_INIT_FORMAT4 (1 << 8) -#define AUOK1901_INIT_FORMAT5 ((1 << 8) | (1 << 6)) -#define AUOK1901_INIT_FORMAT6 ((1 << 8) | (1 << 7)) -#define AUOK1901_INIT_FORMAT7 ((1 << 8) | (1 << 7) | (1 << 6)) - -/* res[4] to bit 10 - * res[3-0] to bits 5-2 - */ -#define AUOK1901_INIT_RESOLUTION(_res) (((_res & (1 << 4)) << 6) \ - | ((_res & 0xf) << 2)) - -/* - * portrait / landscape orientation in AUOK1901_CMD_DMA_START - */ -#define AUOK1901_DMA_ROTATE90(_rot) ((_rot & 1) << 13) - -/* - * equivalent to 1 << 11, needs the ~ to have same rotation like K1900 - */ -#define AUOK1901_DDMA_ROTATE180(_rot) ((~_rot & 2) << 10) - -static void auok1901_init(struct auok190xfb_par *par) -{ - struct device *dev = par->info->device; - struct auok190x_board *board = par->board; - u16 init_param = 0; - - pm_runtime_get_sync(dev); - - init_param |= AUOK190X_INIT_INVERSE_WHITE; - init_param |= AUOK190X_INIT_FORMAT0; - init_param |= AUOK1901_INIT_RESOLUTION(par->resolution); - init_param |= AUOK190X_INIT_SHIFT_LEFT; - - auok190x_send_cmdargs(par, AUOK190X_CMD_INIT, 1, &init_param); - - /* let the controller finish */ - board->wait_for_rdy(par); - - pm_runtime_mark_last_busy(dev); - pm_runtime_put_autosuspend(dev); -} - -static void auok1901_update_region(struct auok190xfb_par *par, int mode, - u16 y1, u16 y2) -{ - struct device *dev = par->info->device; - unsigned char *buf = (unsigned char *)par->info->screen_base; - int xres = par->info->var.xres; - int line_length = par->info->fix.line_length; - u16 args[5]; - - pm_runtime_get_sync(dev); - - mutex_lock(&(par->io_lock)); - - /* y1 and y2 must be a multiple of 2 so drop the lowest bit */ - y1 &= 0xfffe; - y2 &= 0xfffe; - - dev_dbg(dev, "update (x,y,w,h,mode)=(%d,%d,%d,%d,%d)\n", - 1, y1+1, xres, y2-y1, mode); - - /* K1901: first transfer the region data */ - args[0] = AUOK1901_DMA_ROTATE90(par->rotation) | 1; - args[1] = y1 + 1; - args[2] = xres; - args[3] = y2 - y1; - buf += y1 * line_length; - auok190x_send_cmdargs_pixels_nowait(par, AUOK1901_CMD_DMA_START, 4, - args, ((y2 - y1) * line_length)/2, - (u16 *) buf); - auok190x_send_command_nowait(par, AUOK190X_CMD_DATA_STOP); - - /* K1901: second tell the controller to update the region with mode */ - args[0] = mode | AUOK1901_DDMA_ROTATE180(par->rotation); - args[1] = 1; - args[2] = y1 + 1; - args[3] = xres; - args[4] = y2 - y1; - auok190x_send_cmdargs_nowait(par, AUOK1901_CMD_DDMA_START, 5, args); - - par->update_cnt++; - - mutex_unlock(&(par->io_lock)); - - pm_runtime_mark_last_busy(dev); - pm_runtime_put_autosuspend(dev); -} - -static void auok1901fb_dpy_update_pages(struct auok190xfb_par *par, - u16 y1, u16 y2) -{ - int mode; - - if (par->update_mode < 0) { - mode = AUOK190X_UPDATE_MODE(1); - par->last_mode = -1; - } else { - mode = AUOK190X_UPDATE_MODE(par->update_mode); - par->last_mode = par->update_mode; - } - - if (par->flash) - mode |= AUOK190X_UPDATE_NONFLASH; - - auok1901_update_region(par, mode, y1, y2); -} - -static void auok1901fb_dpy_update(struct auok190xfb_par *par) -{ - int mode; - - /* When doing full updates, wait for the controller to be ready - * This will hopefully catch some hangs of the K1901 - */ - par->board->wait_for_rdy(par); - - if (par->update_mode < 0) { - mode = AUOK190X_UPDATE_MODE(0); - par->last_mode = -1; - } else { - mode = AUOK190X_UPDATE_MODE(par->update_mode); - par->last_mode = par->update_mode; - } - - if (par->flash) - mode |= AUOK190X_UPDATE_NONFLASH; - - auok1901_update_region(par, mode, 0, par->info->var.yres); - par->update_cnt = 0; -} - -static bool auok1901fb_need_refresh(struct auok190xfb_par *par) -{ - return (par->update_cnt > 10); -} - -static int auok1901fb_probe(struct platform_device *pdev) -{ - struct auok190x_init_data init; - struct auok190x_board *board; - - /* pick up board specific routines */ - board = pdev->dev.platform_data; - if (!board) - return -EINVAL; - - /* fill temporary init struct for common init */ - init.id = "auo_k1901fb"; - init.board = board; - init.update_partial = auok1901fb_dpy_update_pages; - init.update_all = auok1901fb_dpy_update; - init.need_refresh = auok1901fb_need_refresh; - init.init = auok1901_init; - - return auok190x_common_probe(pdev, &init); -} - -static int auok1901fb_remove(struct platform_device *pdev) -{ - return auok190x_common_remove(pdev); -} - -static struct platform_driver auok1901fb_driver = { - .probe = auok1901fb_probe, - .remove = auok1901fb_remove, - .driver = { - .name = "auo_k1901fb", - .pm = &auok190x_pm, - }, -}; -module_platform_driver(auok1901fb_driver); - -MODULE_DESCRIPTION("framebuffer driver for the AUO-K1901 EPD controller"); -MODULE_AUTHOR("Heiko Stuebner <heiko@sntech.de>"); -MODULE_LICENSE("GPL"); |