diff options
Diffstat (limited to 'drivers/usb')
37 files changed, 278 insertions, 209 deletions
diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c index 80de2f88ed2c..4ab2cb62dfce 100644 --- a/drivers/usb/chipidea/udc.c +++ b/drivers/usb/chipidea/udc.c @@ -105,7 +105,7 @@ static int hw_ep_flush(struct ci_hdrc *ci, int num, int dir) do { /* flush any pending transfer */ - hw_write(ci, OP_ENDPTFLUSH, BIT(n), BIT(n)); + hw_write(ci, OP_ENDPTFLUSH, ~0, BIT(n)); while (hw_read(ci, OP_ENDPTFLUSH, BIT(n))) cpu_relax(); } while (hw_read(ci, OP_ENDPTSTAT, BIT(n))); @@ -205,7 +205,7 @@ static int hw_ep_prime(struct ci_hdrc *ci, int num, int dir, int is_ctrl) if (is_ctrl && dir == RX && hw_read(ci, OP_ENDPTSETUPSTAT, BIT(num))) return -EAGAIN; - hw_write(ci, OP_ENDPTPRIME, BIT(n), BIT(n)); + hw_write(ci, OP_ENDPTPRIME, ~0, BIT(n)); while (hw_read(ci, OP_ENDPTPRIME, BIT(n))) cpu_relax(); diff --git a/drivers/usb/core/config.c b/drivers/usb/core/config.c index 8d72f0c65937..062967c90b2a 100644 --- a/drivers/usb/core/config.c +++ b/drivers/usb/core/config.c @@ -717,6 +717,10 @@ int usb_get_configuration(struct usb_device *dev) result = -ENOMEM; goto err; } + + if (dev->quirks & USB_QUIRK_DELAY_INIT) + msleep(100); + result = usb_get_descriptor(dev, USB_DT_CONFIG, cfgno, bigbuffer, length); if (result < 0) { diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c index 5d01558cef66..ab90a0156828 100644 --- a/drivers/usb/core/driver.c +++ b/drivers/usb/core/driver.c @@ -63,8 +63,10 @@ ssize_t usb_store_new_id(struct usb_dynids *dynids, dynid->id.idProduct = idProduct; dynid->id.match_flags = USB_DEVICE_ID_MATCH_DEVICE; if (fields > 2 && bInterfaceClass) { - if (bInterfaceClass > 255) - return -EINVAL; + if (bInterfaceClass > 255) { + retval = -EINVAL; + goto fail; + } dynid->id.bInterfaceClass = (u8)bInterfaceClass; dynid->id.match_flags |= USB_DEVICE_ID_MATCH_INT_CLASS; @@ -73,17 +75,21 @@ ssize_t usb_store_new_id(struct usb_dynids *dynids, if (fields > 4) { const struct usb_device_id *id = id_table; - if (!id) - return -ENODEV; + if (!id) { + retval = -ENODEV; + goto fail; + } for (; id->match_flags; id++) if (id->idVendor == refVendor && id->idProduct == refProduct) break; - if (id->match_flags) + if (id->match_flags) { dynid->id.driver_info = id->driver_info; - else - return -ENODEV; + } else { + retval = -ENODEV; + goto fail; + } } spin_lock(&dynids->lock); @@ -95,6 +101,10 @@ ssize_t usb_store_new_id(struct usb_dynids *dynids, if (retval) return retval; return count; + +fail: + kfree(dynid); + return retval; } EXPORT_SYMBOL_GPL(usb_store_new_id); diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index 199aaea6bfe0..2518c3250750 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -1032,7 +1032,6 @@ static int register_root_hub(struct usb_hcd *hcd) dev_name(&usb_dev->dev), retval); return retval; } - usb_dev->lpm_capable = usb_device_supports_lpm(usb_dev); } retval = usb_new_device (usb_dev); diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index babba885978d..64ea21971be2 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -128,7 +128,7 @@ struct usb_hub *usb_hub_to_struct_hub(struct usb_device *hdev) return usb_get_intfdata(hdev->actconfig->interface[0]); } -int usb_device_supports_lpm(struct usb_device *udev) +static int usb_device_supports_lpm(struct usb_device *udev) { /* USB 2.1 (and greater) devices indicate LPM support through * their USB 2.0 Extended Capabilities BOS descriptor. @@ -149,11 +149,6 @@ int usb_device_supports_lpm(struct usb_device *udev) "Power management will be impacted.\n"); return 0; } - - /* udev is root hub */ - if (!udev->parent) - return 1; - if (udev->parent->lpm_capable) return 1; diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c index 8f37063c0a49..739ee8e8bdfd 100644 --- a/drivers/usb/core/quirks.c +++ b/drivers/usb/core/quirks.c @@ -47,6 +47,10 @@ static const struct usb_device_id usb_quirk_list[] = { /* Microsoft LifeCam-VX700 v2.0 */ { USB_DEVICE(0x045e, 0x0770), .driver_info = USB_QUIRK_RESET_RESUME }, + /* Logitech HD Pro Webcams C920 and C930e */ + { USB_DEVICE(0x046d, 0x082d), .driver_info = USB_QUIRK_DELAY_INIT }, + { USB_DEVICE(0x046d, 0x0843), .driver_info = USB_QUIRK_DELAY_INIT }, + /* Logitech Quickcam Fusion */ { USB_DEVICE(0x046d, 0x08c1), .driver_info = USB_QUIRK_RESET_RESUME }, diff --git a/drivers/usb/core/usb.h b/drivers/usb/core/usb.h index c49383669cd8..823857767a16 100644 --- a/drivers/usb/core/usb.h +++ b/drivers/usb/core/usb.h @@ -35,7 +35,6 @@ extern int usb_get_device_descriptor(struct usb_device *dev, unsigned int size); extern int usb_get_bos_descriptor(struct usb_device *dev); extern void usb_release_bos_descriptor(struct usb_device *dev); -extern int usb_device_supports_lpm(struct usb_device *udev); extern char *usb_cache_string(struct usb_device *udev, int index); extern int usb_set_configuration(struct usb_device *dev, int configuration); extern int usb_choose_configuration(struct usb_device *udev); diff --git a/drivers/usb/dwc2/core.c b/drivers/usb/dwc2/core.c index 8565d87f94b4..1d129884cc39 100644 --- a/drivers/usb/dwc2/core.c +++ b/drivers/usb/dwc2/core.c @@ -216,7 +216,7 @@ static int dwc2_hs_phy_init(struct dwc2_hsotg *hsotg, bool select_phy) int retval = 0; if (!select_phy) - return -ENODEV; + return 0; usbcfg = readl(hsotg->regs + GUSBCFG); diff --git a/drivers/usb/dwc2/hcd.c b/drivers/usb/dwc2/hcd.c index f59484d43b35..4d918ed8d343 100644 --- a/drivers/usb/dwc2/hcd.c +++ b/drivers/usb/dwc2/hcd.c @@ -2565,25 +2565,14 @@ static void _dwc2_hcd_endpoint_reset(struct usb_hcd *hcd, struct usb_host_endpoint *ep) { struct dwc2_hsotg *hsotg = dwc2_hcd_to_hsotg(hcd); - int is_control = usb_endpoint_xfer_control(&ep->desc); - int is_out = usb_endpoint_dir_out(&ep->desc); - int epnum = usb_endpoint_num(&ep->desc); - struct usb_device *udev; unsigned long flags; dev_dbg(hsotg->dev, "DWC OTG HCD EP RESET: bEndpointAddress=0x%02x\n", ep->desc.bEndpointAddress); - udev = to_usb_device(hsotg->dev); - spin_lock_irqsave(&hsotg->lock, flags); - - usb_settoggle(udev, epnum, is_out, 0); - if (is_control) - usb_settoggle(udev, epnum, !is_out, 0); dwc2_hcd_endpoint_reset(hsotg, ep); - spin_unlock_irqrestore(&hsotg->lock, flags); } diff --git a/drivers/usb/dwc2/platform.c b/drivers/usb/dwc2/platform.c index d01d0d3f2cf0..eaba547ce26b 100644 --- a/drivers/usb/dwc2/platform.c +++ b/drivers/usb/dwc2/platform.c @@ -124,6 +124,9 @@ static int dwc2_driver_probe(struct platform_device *dev) int retval; int irq; + if (usb_disabled()) + return -ENODEV; + match = of_match_device(dwc2_of_match_table, &dev->dev); if (match && match->data) { params = match->data; diff --git a/drivers/usb/gadget/bcm63xx_udc.c b/drivers/usb/gadget/bcm63xx_udc.c index 888fbb43b338..e969eb809a85 100644 --- a/drivers/usb/gadget/bcm63xx_udc.c +++ b/drivers/usb/gadget/bcm63xx_udc.c @@ -360,24 +360,30 @@ static inline void usb_dma_writel(struct bcm63xx_udc *udc, u32 val, u32 off) bcm_writel(val, udc->iudma_regs + off); } -static inline u32 usb_dmac_readl(struct bcm63xx_udc *udc, u32 off) +static inline u32 usb_dmac_readl(struct bcm63xx_udc *udc, u32 off, int chan) { - return bcm_readl(udc->iudma_regs + IUDMA_DMAC_OFFSET + off); + return bcm_readl(udc->iudma_regs + IUDMA_DMAC_OFFSET + off + + (ENETDMA_CHAN_WIDTH * chan)); } -static inline void usb_dmac_writel(struct bcm63xx_udc *udc, u32 val, u32 off) +static inline void usb_dmac_writel(struct bcm63xx_udc *udc, u32 val, u32 off, + int chan) { - bcm_writel(val, udc->iudma_regs + IUDMA_DMAC_OFFSET + off); + bcm_writel(val, udc->iudma_regs + IUDMA_DMAC_OFFSET + off + + (ENETDMA_CHAN_WIDTH * chan)); } -static inline u32 usb_dmas_readl(struct bcm63xx_udc *udc, u32 off) +static inline u32 usb_dmas_readl(struct bcm63xx_udc *udc, u32 off, int chan) { - return bcm_readl(udc->iudma_regs + IUDMA_DMAS_OFFSET + off); + return bcm_readl(udc->iudma_regs + IUDMA_DMAS_OFFSET + off + + (ENETDMA_CHAN_WIDTH * chan)); } -static inline void usb_dmas_writel(struct bcm63xx_udc *udc, u32 val, u32 off) +static inline void usb_dmas_writel(struct bcm63xx_udc *udc, u32 val, u32 off, + int chan) { - bcm_writel(val, udc->iudma_regs + IUDMA_DMAS_OFFSET + off); + bcm_writel(val, udc->iudma_regs + IUDMA_DMAS_OFFSET + off + + (ENETDMA_CHAN_WIDTH * chan)); } static inline void set_clocks(struct bcm63xx_udc *udc, bool is_enabled) @@ -638,7 +644,7 @@ static void iudma_write(struct bcm63xx_udc *udc, struct iudma_ch *iudma, } while (!last_bd); usb_dmac_writel(udc, ENETDMAC_CHANCFG_EN_MASK, - ENETDMAC_CHANCFG_REG(iudma->ch_idx)); + ENETDMAC_CHANCFG_REG, iudma->ch_idx); } /** @@ -694,9 +700,9 @@ static void iudma_reset_channel(struct bcm63xx_udc *udc, struct iudma_ch *iudma) bcm63xx_fifo_reset_ep(udc, max(0, iudma->ep_num)); /* stop DMA, then wait for the hardware to wrap up */ - usb_dmac_writel(udc, 0, ENETDMAC_CHANCFG_REG(ch_idx)); + usb_dmac_writel(udc, 0, ENETDMAC_CHANCFG_REG, ch_idx); - while (usb_dmac_readl(udc, ENETDMAC_CHANCFG_REG(ch_idx)) & + while (usb_dmac_readl(udc, ENETDMAC_CHANCFG_REG, ch_idx) & ENETDMAC_CHANCFG_EN_MASK) { udelay(1); @@ -713,10 +719,10 @@ static void iudma_reset_channel(struct bcm63xx_udc *udc, struct iudma_ch *iudma) dev_warn(udc->dev, "forcibly halting IUDMA channel %d\n", ch_idx); usb_dmac_writel(udc, ENETDMAC_CHANCFG_BUFHALT_MASK, - ENETDMAC_CHANCFG_REG(ch_idx)); + ENETDMAC_CHANCFG_REG, ch_idx); } } - usb_dmac_writel(udc, ~0, ENETDMAC_IR_REG(ch_idx)); + usb_dmac_writel(udc, ~0, ENETDMAC_IR_REG, ch_idx); /* don't leave "live" HW-owned entries for the next guy to step on */ for (d = iudma->bd_ring; d <= iudma->end_bd; d++) @@ -728,11 +734,11 @@ static void iudma_reset_channel(struct bcm63xx_udc *udc, struct iudma_ch *iudma) /* set up IRQs, UBUS burst size, and BD base for this channel */ usb_dmac_writel(udc, ENETDMAC_IR_BUFDONE_MASK, - ENETDMAC_IRMASK_REG(ch_idx)); - usb_dmac_writel(udc, 8, ENETDMAC_MAXBURST_REG(ch_idx)); + ENETDMAC_IRMASK_REG, ch_idx); + usb_dmac_writel(udc, 8, ENETDMAC_MAXBURST_REG, ch_idx); - usb_dmas_writel(udc, iudma->bd_ring_dma, ENETDMAS_RSTART_REG(ch_idx)); - usb_dmas_writel(udc, 0, ENETDMAS_SRAM2_REG(ch_idx)); + usb_dmas_writel(udc, iudma->bd_ring_dma, ENETDMAS_RSTART_REG, ch_idx); + usb_dmas_writel(udc, 0, ENETDMAS_SRAM2_REG, ch_idx); } /** @@ -2035,7 +2041,7 @@ static irqreturn_t bcm63xx_udc_data_isr(int irq, void *dev_id) spin_lock(&udc->lock); usb_dmac_writel(udc, ENETDMAC_IR_BUFDONE_MASK, - ENETDMAC_IR_REG(iudma->ch_idx)); + ENETDMAC_IR_REG, iudma->ch_idx); bep = iudma->bep; rc = iudma_read(udc, iudma); @@ -2175,18 +2181,18 @@ static int bcm63xx_iudma_dbg_show(struct seq_file *s, void *p) seq_printf(s, " [ep%d]:\n", max_t(int, iudma_defaults[ch_idx].ep_num, 0)); seq_printf(s, " cfg: %08x; irqstat: %08x; irqmask: %08x; maxburst: %08x\n", - usb_dmac_readl(udc, ENETDMAC_CHANCFG_REG(ch_idx)), - usb_dmac_readl(udc, ENETDMAC_IR_REG(ch_idx)), - usb_dmac_readl(udc, ENETDMAC_IRMASK_REG(ch_idx)), - usb_dmac_readl(udc, ENETDMAC_MAXBURST_REG(ch_idx))); + usb_dmac_readl(udc, ENETDMAC_CHANCFG_REG, ch_idx), + usb_dmac_readl(udc, ENETDMAC_IR_REG, ch_idx), + usb_dmac_readl(udc, ENETDMAC_IRMASK_REG, ch_idx), + usb_dmac_readl(udc, ENETDMAC_MAXBURST_REG, ch_idx)); - sram2 = usb_dmas_readl(udc, ENETDMAS_SRAM2_REG(ch_idx)); - sram3 = usb_dmas_readl(udc, ENETDMAS_SRAM3_REG(ch_idx)); + sram2 = usb_dmas_readl(udc, ENETDMAS_SRAM2_REG, ch_idx); + sram3 = usb_dmas_readl(udc, ENETDMAS_SRAM3_REG, ch_idx); seq_printf(s, " base: %08x; index: %04x_%04x; desc: %04x_%04x %08x\n", - usb_dmas_readl(udc, ENETDMAS_RSTART_REG(ch_idx)), + usb_dmas_readl(udc, ENETDMAS_RSTART_REG, ch_idx), sram2 >> 16, sram2 & 0xffff, sram3 >> 16, sram3 & 0xffff, - usb_dmas_readl(udc, ENETDMAS_SRAM4_REG(ch_idx))); + usb_dmas_readl(udc, ENETDMAS_SRAM4_REG, ch_idx)); seq_printf(s, " desc: %d/%d used", iudma->n_bds_used, iudma->n_bds); diff --git a/drivers/usb/gadget/f_fs.c b/drivers/usb/gadget/f_fs.c index 306a2b52125c..2b4334394076 100644 --- a/drivers/usb/gadget/f_fs.c +++ b/drivers/usb/gadget/f_fs.c @@ -585,7 +585,6 @@ static ssize_t ffs_epfile_io(struct file *file, char __user *buf, size_t len, int read) { struct ffs_epfile *epfile = file->private_data; - struct usb_gadget *gadget = epfile->ffs->gadget; struct ffs_ep *ep; char *data = NULL; ssize_t ret, data_len; @@ -622,6 +621,12 @@ static ssize_t ffs_epfile_io(struct file *file, /* Allocate & copy */ if (!halt) { /* + * if we _do_ wait above, the epfile->ffs->gadget might be NULL + * before the waiting completes, so do not assign to 'gadget' earlier + */ + struct usb_gadget *gadget = epfile->ffs->gadget; + + /* * Controller may require buffer size to be aligned to * maxpacketsize of an out endpoint. */ diff --git a/drivers/usb/gadget/printer.c b/drivers/usb/gadget/printer.c index bf7a56b6d48a..69b76efd11e9 100644 --- a/drivers/usb/gadget/printer.c +++ b/drivers/usb/gadget/printer.c @@ -1157,7 +1157,7 @@ static int __init printer_bind_config(struct usb_configuration *c) usb_gadget_set_selfpowered(gadget); - if (gadget->is_otg) { + if (gadget_is_otg(gadget)) { otg_descriptor.bmAttributes |= USB_OTG_HNP; printer_cfg_driver.descriptors = otg_desc; printer_cfg_driver.bmAttributes |= USB_CONFIG_ATT_WAKEUP; diff --git a/drivers/usb/gadget/s3c2410_udc.c b/drivers/usb/gadget/s3c2410_udc.c index f04b2c3154de..dd9678f85c58 100644 --- a/drivers/usb/gadget/s3c2410_udc.c +++ b/drivers/usb/gadget/s3c2410_udc.c @@ -1629,7 +1629,7 @@ static void s3c2410_udc_reinit(struct s3c2410_udc *dev) ep->ep.desc = NULL; ep->halted = 0; INIT_LIST_HEAD(&ep->queue); - usb_ep_set_maxpacket_limit(&ep->ep, &ep->ep.maxpacket); + usb_ep_set_maxpacket_limit(&ep->ep, ep->ep.maxpacket); } } diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index 471142725ffe..81cda09b47e3 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -685,8 +685,15 @@ static irqreturn_t ehci_irq (struct usb_hcd *hcd) struct ehci_hcd *ehci = hcd_to_ehci (hcd); u32 status, masked_status, pcd_status = 0, cmd; int bh; + unsigned long flags; - spin_lock (&ehci->lock); + /* + * For threadirqs option we use spin_lock_irqsave() variant to prevent + * deadlock with ehci hrtimer callback, because hrtimer callbacks run + * in interrupt context even when threadirqs is specified. We can go + * back to spin_lock() variant when hrtimer callbacks become threaded. + */ + spin_lock_irqsave(&ehci->lock, flags); status = ehci_readl(ehci, &ehci->regs->status); @@ -704,7 +711,7 @@ static irqreturn_t ehci_irq (struct usb_hcd *hcd) /* Shared IRQ? */ if (!masked_status || unlikely(ehci->rh_state == EHCI_RH_HALTED)) { - spin_unlock(&ehci->lock); + spin_unlock_irqrestore(&ehci->lock, flags); return IRQ_NONE; } @@ -815,7 +822,7 @@ dead: if (bh) ehci_work (ehci); - spin_unlock (&ehci->lock); + spin_unlock_irqrestore(&ehci->lock, flags); if (pcd_status) usb_hcd_poll_rh_status(hcd); return IRQ_HANDLED; diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c index 47b858fc50b2..7ae0c4d51741 100644 --- a/drivers/usb/host/ehci-hub.c +++ b/drivers/usb/host/ehci-hub.c @@ -238,6 +238,7 @@ static int ehci_bus_suspend (struct usb_hcd *hcd) int port; int mask; int changed; + bool fs_idle_delay; ehci_dbg(ehci, "suspend root hub\n"); @@ -272,6 +273,7 @@ static int ehci_bus_suspend (struct usb_hcd *hcd) ehci->bus_suspended = 0; ehci->owned_ports = 0; changed = 0; + fs_idle_delay = false; port = HCS_N_PORTS(ehci->hcs_params); while (port--) { u32 __iomem *reg = &ehci->regs->port_status [port]; @@ -300,16 +302,32 @@ static int ehci_bus_suspend (struct usb_hcd *hcd) } if (t1 != t2) { + /* + * On some controllers, Wake-On-Disconnect will + * generate false wakeup signals until the bus + * switches over to full-speed idle. For their + * sake, add a delay if we need one. + */ + if ((t2 & PORT_WKDISC_E) && + ehci_port_speed(ehci, t2) == + USB_PORT_STAT_HIGH_SPEED) + fs_idle_delay = true; ehci_writel(ehci, t2, reg); changed = 1; } } + spin_unlock_irq(&ehci->lock); + + if ((changed && ehci->has_tdi_phy_lpm) || fs_idle_delay) { + /* + * Wait for HCD to enter low-power mode or for the bus + * to switch to full-speed idle. + */ + usleep_range(5000, 5500); + } if (changed && ehci->has_tdi_phy_lpm) { - spin_unlock_irq(&ehci->lock); - msleep(5); /* 5 ms for HCD to enter low-power mode */ spin_lock_irq(&ehci->lock); - port = HCS_N_PORTS(ehci->hcs_params); while (port--) { u32 __iomem *hostpc_reg = &ehci->regs->hostpc[port]; @@ -322,8 +340,8 @@ static int ehci_bus_suspend (struct usb_hcd *hcd) port, (t3 & HOSTPC_PHCD) ? "succeeded" : "failed"); } + spin_unlock_irq(&ehci->lock); } - spin_unlock_irq(&ehci->lock); /* Apparently some devices need a >= 1-uframe delay here */ if (ehci->bus_suspended) diff --git a/drivers/usb/host/xhci-dbg.c b/drivers/usb/host/xhci-dbg.c index b016d38199f2..eb009a457fb5 100644 --- a/drivers/usb/host/xhci-dbg.c +++ b/drivers/usb/host/xhci-dbg.c @@ -203,12 +203,12 @@ void xhci_print_ir_set(struct xhci_hcd *xhci, int set_num) addr, (unsigned int)temp); addr = &ir_set->erst_base; - temp_64 = readq(addr); + temp_64 = xhci_read_64(xhci, addr); xhci_dbg(xhci, " %p: ir_set.erst_base = @%08llx\n", addr, temp_64); addr = &ir_set->erst_dequeue; - temp_64 = readq(addr); + temp_64 = xhci_read_64(xhci, addr); xhci_dbg(xhci, " %p: ir_set.erst_dequeue = @%08llx\n", addr, temp_64); } @@ -412,7 +412,7 @@ void xhci_dbg_cmd_ptrs(struct xhci_hcd *xhci) { u64 val; - val = readq(&xhci->op_regs->cmd_ring); + val = xhci_read_64(xhci, &xhci->op_regs->cmd_ring); xhci_dbg(xhci, "// xHC command ring deq ptr low bits + flags = @%08x\n", lower_32_bits(val)); xhci_dbg(xhci, "// xHC command ring deq ptr high bits = @%08x\n", diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c index 873c272b3ef5..bce4391a0e7d 100644 --- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c @@ -1958,7 +1958,7 @@ static void xhci_set_hc_event_deq(struct xhci_hcd *xhci) xhci_warn(xhci, "WARN something wrong with SW event ring " "dequeue ptr.\n"); /* Update HC event ring dequeue pointer */ - temp = readq(&xhci->ir_set->erst_dequeue); + temp = xhci_read_64(xhci, &xhci->ir_set->erst_dequeue); temp &= ERST_PTR_MASK; /* Don't clear the EHB bit (which is RW1C) because * there might be more events to service. @@ -1967,7 +1967,7 @@ static void xhci_set_hc_event_deq(struct xhci_hcd *xhci) xhci_dbg_trace(xhci, trace_xhci_dbg_init, "// Write event ring dequeue pointer, " "preserving EHB bit"); - writeq(((u64) deq & (u64) ~ERST_PTR_MASK) | temp, + xhci_write_64(xhci, ((u64) deq & (u64) ~ERST_PTR_MASK) | temp, &xhci->ir_set->erst_dequeue); } @@ -2269,7 +2269,7 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags) xhci_dbg_trace(xhci, trace_xhci_dbg_init, "// Device context base array address = 0x%llx (DMA), %p (virt)", (unsigned long long)xhci->dcbaa->dma, xhci->dcbaa); - writeq(dma, &xhci->op_regs->dcbaa_ptr); + xhci_write_64(xhci, dma, &xhci->op_regs->dcbaa_ptr); /* * Initialize the ring segment pool. The ring must be a contiguous @@ -2312,13 +2312,13 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags) (unsigned long long)xhci->cmd_ring->first_seg->dma); /* Set the address in the Command Ring Control register */ - val_64 = readq(&xhci->op_regs->cmd_ring); + val_64 = xhci_read_64(xhci, &xhci->op_regs->cmd_ring); val_64 = (val_64 & (u64) CMD_RING_RSVD_BITS) | (xhci->cmd_ring->first_seg->dma & (u64) ~CMD_RING_RSVD_BITS) | xhci->cmd_ring->cycle_state; xhci_dbg_trace(xhci, trace_xhci_dbg_init, "// Setting command ring address to 0x%x", val); - writeq(val_64, &xhci->op_regs->cmd_ring); + xhci_write_64(xhci, val_64, &xhci->op_regs->cmd_ring); xhci_dbg_cmd_ptrs(xhci); xhci->lpm_command = xhci_alloc_command(xhci, true, true, flags); @@ -2396,10 +2396,10 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags) xhci_dbg_trace(xhci, trace_xhci_dbg_init, "// Set ERST base address for ir_set 0 = 0x%llx", (unsigned long long)xhci->erst.erst_dma_addr); - val_64 = readq(&xhci->ir_set->erst_base); + val_64 = xhci_read_64(xhci, &xhci->ir_set->erst_base); val_64 &= ERST_PTR_MASK; val_64 |= (xhci->erst.erst_dma_addr & (u64) ~ERST_PTR_MASK); - writeq(val_64, &xhci->ir_set->erst_base); + xhci_write_64(xhci, val_64, &xhci->ir_set->erst_base); /* Set the event ring dequeue address */ xhci_set_hc_event_deq(xhci); diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index 3c898c12a06b..04f986d9234f 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -142,6 +142,11 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci) "QUIRK: Resetting on resume"); xhci->quirks |= XHCI_TRUST_TX_LENGTH; } + if (pdev->vendor == PCI_VENDOR_ID_RENESAS && + pdev->device == 0x0015 && + pdev->subsystem_vendor == PCI_VENDOR_ID_SAMSUNG && + pdev->subsystem_device == 0xc0cd) + xhci->quirks |= XHCI_RESET_ON_RESUME; if (pdev->vendor == PCI_VENDOR_ID_VIA) xhci->quirks |= XHCI_RESET_ON_RESUME; } diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index a0b248c34526..0ed64eb68e48 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -307,13 +307,14 @@ static int xhci_abort_cmd_ring(struct xhci_hcd *xhci) return 0; } - temp_64 = readq(&xhci->op_regs->cmd_ring); + temp_64 = xhci_read_64(xhci, &xhci->op_regs->cmd_ring); if (!(temp_64 & CMD_RING_RUNNING)) { xhci_dbg(xhci, "Command ring had been stopped\n"); return 0; } xhci->cmd_ring_state = CMD_RING_STATE_ABORTED; - writeq(temp_64 | CMD_RING_ABORT, &xhci->op_regs->cmd_ring); + xhci_write_64(xhci, temp_64 | CMD_RING_ABORT, + &xhci->op_regs->cmd_ring); /* Section 4.6.1.2 of xHCI 1.0 spec says software should * time the completion od all xHCI commands, including @@ -2864,8 +2865,9 @@ hw_died: /* Clear the event handler busy flag (RW1C); * the event ring should be empty. */ - temp_64 = readq(&xhci->ir_set->erst_dequeue); - writeq(temp_64 | ERST_EHB, &xhci->ir_set->erst_dequeue); + temp_64 = xhci_read_64(xhci, &xhci->ir_set->erst_dequeue); + xhci_write_64(xhci, temp_64 | ERST_EHB, + &xhci->ir_set->erst_dequeue); spin_unlock(&xhci->lock); return IRQ_HANDLED; @@ -2877,7 +2879,7 @@ hw_died: */ while (xhci_handle_event(xhci) > 0) {} - temp_64 = readq(&xhci->ir_set->erst_dequeue); + temp_64 = xhci_read_64(xhci, &xhci->ir_set->erst_dequeue); /* If necessary, update the HW's version of the event ring deq ptr. */ if (event_ring_deq != xhci->event_ring->dequeue) { deq = xhci_trb_virt_to_dma(xhci->event_ring->deq_seg, @@ -2892,7 +2894,7 @@ hw_died: /* Clear the event handler busy flag (RW1C); event ring is empty. */ temp_64 |= ERST_EHB; - writeq(temp_64, &xhci->ir_set->erst_dequeue); + xhci_write_64(xhci, temp_64, &xhci->ir_set->erst_dequeue); spin_unlock(&xhci->lock); @@ -2965,58 +2967,8 @@ static int prepare_ring(struct xhci_hcd *xhci, struct xhci_ring *ep_ring, } while (1) { - if (room_on_ring(xhci, ep_ring, num_trbs)) { - union xhci_trb *trb = ep_ring->enqueue; - unsigned int usable = ep_ring->enq_seg->trbs + - TRBS_PER_SEGMENT - 1 - trb; - u32 nop_cmd; - - /* - * Section 4.11.7.1 TD Fragments states that a link - * TRB must only occur at the boundary between - * data bursts (eg 512 bytes for 480M). - * While it is possible to split a large fragment - * we don't know the size yet. - * Simplest solution is to fill the trb before the - * LINK with nop commands. - */ - if (num_trbs == 1 || num_trbs <= usable || usable == 0) - break; - - if (ep_ring->type != TYPE_BULK) - /* - * While isoc transfers might have a buffer that - * crosses a 64k boundary it is unlikely. - * Since we can't add NOPs without generating - * gaps in the traffic just hope it never - * happens at the end of the ring. - * This could be fixed by writing a LINK TRB - * instead of the first NOP - however the - * TRB_TYPE_LINK_LE32() calls would all need - * changing to check the ring length. - */ - break; - - if (num_trbs >= TRBS_PER_SEGMENT) { - xhci_err(xhci, "Too many fragments %d, max %d\n", - num_trbs, TRBS_PER_SEGMENT - 1); - return -EINVAL; - } - - nop_cmd = cpu_to_le32(TRB_TYPE(TRB_TR_NOOP) | - ep_ring->cycle_state); - ep_ring->num_trbs_free -= usable; - do { - trb->generic.field[0] = 0; - trb->generic.field[1] = 0; - trb->generic.field[2] = 0; - trb->generic.field[3] = nop_cmd; - trb++; - } while (--usable); - ep_ring->enqueue = trb; - if (room_on_ring(xhci, ep_ring, num_trbs)) - break; - } + if (room_on_ring(xhci, ep_ring, num_trbs)) + break; if (ep_ring == xhci->cmd_ring) { xhci_err(xhci, "Do not support expand command ring\n"); diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index ad364394885a..924a6ccdb622 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -611,7 +611,7 @@ int xhci_run(struct usb_hcd *hcd) xhci_dbg(xhci, "Event ring:\n"); xhci_debug_ring(xhci, xhci->event_ring); xhci_dbg_ring_ptrs(xhci, xhci->event_ring); - temp_64 = readq(&xhci->ir_set->erst_dequeue); + temp_64 = xhci_read_64(xhci, &xhci->ir_set->erst_dequeue); temp_64 &= ~ERST_PTR_MASK; xhci_dbg_trace(xhci, trace_xhci_dbg_init, "ERST deq = 64'h%0lx", (long unsigned int) temp_64); @@ -756,11 +756,11 @@ static void xhci_save_registers(struct xhci_hcd *xhci) { xhci->s3.command = readl(&xhci->op_regs->command); xhci->s3.dev_nt = readl(&xhci->op_regs->dev_notification); - xhci->s3.dcbaa_ptr = readq(&xhci->op_regs->dcbaa_ptr); + xhci->s3.dcbaa_ptr = xhci_read_64(xhci, &xhci->op_regs->dcbaa_ptr); xhci->s3.config_reg = readl(&xhci->op_regs->config_reg); xhci->s3.erst_size = readl(&xhci->ir_set->erst_size); - xhci->s3.erst_base = readq(&xhci->ir_set->erst_base); - xhci->s3.erst_dequeue = readq(&xhci->ir_set->erst_dequeue); + xhci->s3.erst_base = xhci_read_64(xhci, &xhci->ir_set->erst_base); + xhci->s3.erst_dequeue = xhci_read_64(xhci, &xhci->ir_set->erst_dequeue); xhci->s3.irq_pending = readl(&xhci->ir_set->irq_pending); xhci->s3.irq_control = readl(&xhci->ir_set->irq_control); } @@ -769,11 +769,11 @@ static void xhci_restore_registers(struct xhci_hcd *xhci) { writel(xhci->s3.command, &xhci->op_regs->command); writel(xhci->s3.dev_nt, &xhci->op_regs->dev_notification); - writeq(xhci->s3.dcbaa_ptr, &xhci->op_regs->dcbaa_ptr); + xhci_write_64(xhci, xhci->s3.dcbaa_ptr, &xhci->op_regs->dcbaa_ptr); writel(xhci->s3.config_reg, &xhci->op_regs->config_reg); writel(xhci->s3.erst_size, &xhci->ir_set->erst_size); - writeq(xhci->s3.erst_base, &xhci->ir_set->erst_base); - writeq(xhci->s3.erst_dequeue, &xhci->ir_set->erst_dequeue); + xhci_write_64(xhci, xhci->s3.erst_base, &xhci->ir_set->erst_base); + xhci_write_64(xhci, xhci->s3.erst_dequeue, &xhci->ir_set->erst_dequeue); writel(xhci->s3.irq_pending, &xhci->ir_set->irq_pending); writel(xhci->s3.irq_control, &xhci->ir_set->irq_control); } @@ -783,7 +783,7 @@ static void xhci_set_cmd_ring_deq(struct xhci_hcd *xhci) u64 val_64; /* step 2: initialize command ring buffer */ - val_64 = readq(&xhci->op_regs->cmd_ring); + val_64 = xhci_read_64(xhci, &xhci->op_regs->cmd_ring); val_64 = (val_64 & (u64) CMD_RING_RSVD_BITS) | (xhci_trb_virt_to_dma(xhci->cmd_ring->deq_seg, xhci->cmd_ring->dequeue) & @@ -792,7 +792,7 @@ static void xhci_set_cmd_ring_deq(struct xhci_hcd *xhci) xhci_dbg_trace(xhci, trace_xhci_dbg_init, "// Setting command ring address to 0x%llx", (long unsigned long) val_64); - writeq(val_64, &xhci->op_regs->cmd_ring); + xhci_write_64(xhci, val_64, &xhci->op_regs->cmd_ring); } /* @@ -3842,7 +3842,7 @@ static int xhci_setup_device(struct usb_hcd *hcd, struct usb_device *udev, if (ret) { return ret; } - temp_64 = readq(&xhci->op_regs->dcbaa_ptr); + temp_64 = xhci_read_64(xhci, &xhci->op_regs->dcbaa_ptr); xhci_dbg_trace(xhci, trace_xhci_dbg_address, "Op regs DCBAA ptr = %#016llx", temp_64); xhci_dbg_trace(xhci, trace_xhci_dbg_address, @@ -4730,8 +4730,8 @@ int xhci_gen_setup(struct usb_hcd *hcd, xhci_get_quirks_t get_quirks) struct device *dev = hcd->self.controller; int retval; - /* Limit the block layer scatter-gather lists to half a segment. */ - hcd->self.sg_tablesize = TRBS_PER_SEGMENT / 2; + /* Accept arbitrarily long scatter-gather lists */ + hcd->self.sg_tablesize = ~0; /* support to build packet from discontinuous buffers */ hcd->self.no_sg_constraint = 1; diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index f8416639bf31..58ed9d088e63 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -28,17 +28,6 @@ #include <linux/kernel.h> #include <linux/usb/hcd.h> -/* - * Registers should always be accessed with double word or quad word accesses. - * - * Some xHCI implementations may support 64-bit address pointers. Registers - * with 64-bit address pointers should be written to with dword accesses by - * writing the low dword first (ptr[0]), then the high dword (ptr[1]) second. - * xHCI implementations that do not support 64-bit address pointers will ignore - * the high dword, and write order is irrelevant. - */ -#include <asm-generic/io-64-nonatomic-lo-hi.h> - /* Code sharing between pci-quirks and xhci hcd */ #include "xhci-ext-caps.h" #include "pci-quirks.h" @@ -1279,7 +1268,7 @@ union xhci_trb { * since the command ring is 64-byte aligned. * It must also be greater than 16. */ -#define TRBS_PER_SEGMENT 256 +#define TRBS_PER_SEGMENT 64 /* Allow two commands + a link TRB, along with any reserved command TRBs */ #define MAX_RSVD_CMD_TRBS (TRBS_PER_SEGMENT - 3) #define TRB_SEGMENT_SIZE (TRBS_PER_SEGMENT*16) @@ -1614,6 +1603,34 @@ static inline struct usb_hcd *xhci_to_hcd(struct xhci_hcd *xhci) #define xhci_warn_ratelimited(xhci, fmt, args...) \ dev_warn_ratelimited(xhci_to_hcd(xhci)->self.controller , fmt , ## args) +/* + * Registers should always be accessed with double word or quad word accesses. + * + * Some xHCI implementations may support 64-bit address pointers. Registers + * with 64-bit address pointers should be written to with dword accesses by + * writing the low dword first (ptr[0]), then the high dword (ptr[1]) second. + * xHCI implementations that do not support 64-bit address pointers will ignore + * the high dword, and write order is irrelevant. + */ +static inline u64 xhci_read_64(const struct xhci_hcd *xhci, + __le64 __iomem *regs) +{ + __u32 __iomem *ptr = (__u32 __iomem *) regs; + u64 val_lo = readl(ptr); + u64 val_hi = readl(ptr + 1); + return val_lo + (val_hi << 32); +} +static inline void xhci_write_64(struct xhci_hcd *xhci, + const u64 val, __le64 __iomem *regs) +{ + __u32 __iomem *ptr = (__u32 __iomem *) regs; + u32 val_lo = lower_32_bits(val); + u32 val_hi = upper_32_bits(val); + + writel(val_lo, ptr); + writel(val_hi, ptr + 1); +} + static inline int xhci_link_trb_quirk(struct xhci_hcd *xhci) { return xhci->quirks & XHCI_LINK_TRB_QUIRK; diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index fc192ad9cc6a..239ad0b1ceb6 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -477,8 +477,11 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb, musb->port1_status |= (USB_PORT_STAT_C_SUSPEND << 16) | MUSB_PORT_STAT_RESUME; + musb->rh_timer = jiffies + + msecs_to_jiffies(20); schedule_delayed_work( - &musb->finish_resume_work, 20); + &musb->finish_resume_work, + msecs_to_jiffies(20)); musb->xceiv->state = OTG_STATE_A_HOST; musb->is_active = 1; @@ -2157,11 +2160,19 @@ static void musb_restore_context(struct musb *musb) void __iomem *musb_base = musb->mregs; void __iomem *ep_target_regs; void __iomem *epio; + u8 power; musb_writew(musb_base, MUSB_FRAME, musb->context.frame); musb_writeb(musb_base, MUSB_TESTMODE, musb->context.testmode); musb_write_ulpi_buscontrol(musb->mregs, musb->context.busctl); - musb_writeb(musb_base, MUSB_POWER, musb->context.power); + + /* Don't affect SUSPENDM/RESUME bits in POWER reg */ + power = musb_readb(musb_base, MUSB_POWER); + power &= MUSB_POWER_SUSPENDM | MUSB_POWER_RESUME; + musb->context.power &= ~(MUSB_POWER_SUSPENDM | MUSB_POWER_RESUME); + power |= musb->context.power; + musb_writeb(musb_base, MUSB_POWER, power); + musb_writew(musb_base, MUSB_INTRTXE, musb->intrtxe); musb_writew(musb_base, MUSB_INTRRXE, musb->intrrxe); musb_writeb(musb_base, MUSB_INTRUSBE, musb->context.intrusbe); diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c index ed455724017b..abb38c3833ef 100644 --- a/drivers/usb/musb/musb_host.c +++ b/drivers/usb/musb/musb_host.c @@ -1183,6 +1183,9 @@ irqreturn_t musb_h_ep0_irq(struct musb *musb) csr = MUSB_CSR0_H_STATUSPKT | MUSB_CSR0_TXPKTRDY; + /* disable ping token in status phase */ + csr |= MUSB_CSR0_H_DIS_PING; + /* flag status stage */ musb->ep0_stage = MUSB_EP0_STATUS; diff --git a/drivers/usb/musb/musb_virthub.c b/drivers/usb/musb/musb_virthub.c index eb634433ef09..e2d2d8c9891b 100644 --- a/drivers/usb/musb/musb_virthub.c +++ b/drivers/usb/musb/musb_virthub.c @@ -135,7 +135,8 @@ void musb_port_suspend(struct musb *musb, bool do_suspend) /* later, GetPortStatus will stop RESUME signaling */ musb->port1_status |= MUSB_PORT_STAT_RESUME; - schedule_delayed_work(&musb->finish_resume_work, 20); + schedule_delayed_work(&musb->finish_resume_work, + msecs_to_jiffies(20)); } } @@ -158,7 +159,6 @@ void musb_port_reset(struct musb *musb, bool do_reset) */ power = musb_readb(mbase, MUSB_POWER); if (do_reset) { - /* * If RESUME is set, we must make sure it stays minimum 20 ms. * Then we must clear RESUME and wait a bit to let musb start @@ -167,11 +167,22 @@ void musb_port_reset(struct musb *musb, bool do_reset) * detected". */ if (power & MUSB_POWER_RESUME) { - while (time_before(jiffies, musb->rh_timer)) - msleep(1); + long remain = (unsigned long) musb->rh_timer - jiffies; + + if (musb->rh_timer > 0 && remain > 0) { + /* take into account the minimum delay after resume */ + schedule_delayed_work( + &musb->deassert_reset_work, remain); + return; + } + musb_writeb(mbase, MUSB_POWER, - power & ~MUSB_POWER_RESUME); - msleep(1); + power & ~MUSB_POWER_RESUME); + + /* Give the core 1 ms to clear MUSB_POWER_RESUME */ + schedule_delayed_work(&musb->deassert_reset_work, + msecs_to_jiffies(1)); + return; } power &= 0xf0; @@ -180,7 +191,8 @@ void musb_port_reset(struct musb *musb, bool do_reset) musb->port1_status |= USB_PORT_STAT_RESET; musb->port1_status &= ~USB_PORT_STAT_ENABLE; - schedule_delayed_work(&musb->deassert_reset_work, 50); + schedule_delayed_work(&musb->deassert_reset_work, + msecs_to_jiffies(50)); } else { dev_dbg(musb->controller, "root port reset stopped\n"); musb_writeb(mbase, MUSB_POWER, diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c index 2a408cdaf7b2..8aa59a2c5eb2 100644 --- a/drivers/usb/musb/omap2430.c +++ b/drivers/usb/musb/omap2430.c @@ -659,7 +659,6 @@ static int omap2430_runtime_suspend(struct device *dev) OTG_INTERFSEL); omap2430_low_level_exit(musb); - phy_power_off(musb->phy); } return 0; @@ -674,7 +673,6 @@ static int omap2430_runtime_resume(struct device *dev) omap2430_low_level_init(musb); musb_writel(musb->mregs, OTG_INTERFSEL, musb->context.otg_interfsel); - phy_power_on(musb->phy); } return 0; diff --git a/drivers/usb/phy/phy-msm-usb.c b/drivers/usb/phy/phy-msm-usb.c index 8546c8dccd51..d204f745ed05 100644 --- a/drivers/usb/phy/phy-msm-usb.c +++ b/drivers/usb/phy/phy-msm-usb.c @@ -159,32 +159,6 @@ put_3p3: return rc; } -#ifdef CONFIG_PM_SLEEP -#define USB_PHY_SUSP_DIG_VOL 500000 -static int msm_hsusb_config_vddcx(int high) -{ - int max_vol = USB_PHY_VDD_DIG_VOL_MAX; - int min_vol; - int ret; - - if (high) - min_vol = USB_PHY_VDD_DIG_VOL_MIN; - else - min_vol = USB_PHY_SUSP_DIG_VOL; - - ret = regulator_set_voltage(hsusb_vddcx, min_vol, max_vol); - if (ret) { - pr_err("%s: unable to set the voltage for regulator " - "HSUSB_VDDCX\n", __func__); - return ret; - } - - pr_debug("%s: min_vol:%d max_vol:%d\n", __func__, min_vol, max_vol); - - return ret; -} -#endif - static int msm_hsusb_ldo_set_mode(int on) { int ret = 0; @@ -440,7 +414,32 @@ static int msm_otg_reset(struct usb_phy *phy) #define PHY_SUSPEND_TIMEOUT_USEC (500 * 1000) #define PHY_RESUME_TIMEOUT_USEC (100 * 1000) -#ifdef CONFIG_PM_SLEEP +#ifdef CONFIG_PM + +#define USB_PHY_SUSP_DIG_VOL 500000 +static int msm_hsusb_config_vddcx(int high) +{ + int max_vol = USB_PHY_VDD_DIG_VOL_MAX; + int min_vol; + int ret; + + if (high) + min_vol = USB_PHY_VDD_DIG_VOL_MIN; + else + min_vol = USB_PHY_SUSP_DIG_VOL; + + ret = regulator_set_voltage(hsusb_vddcx, min_vol, max_vol); + if (ret) { + pr_err("%s: unable to set the voltage for regulator " + "HSUSB_VDDCX\n", __func__); + return ret; + } + + pr_debug("%s: min_vol:%d max_vol:%d\n", __func__, min_vol, max_vol); + + return ret; +} + static int msm_otg_suspend(struct msm_otg *motg) { struct usb_phy *phy = &motg->phy; @@ -1733,22 +1732,18 @@ static int msm_otg_pm_resume(struct device *dev) } #endif -#ifdef CONFIG_PM static const struct dev_pm_ops msm_otg_dev_pm_ops = { SET_SYSTEM_SLEEP_PM_OPS(msm_otg_pm_suspend, msm_otg_pm_resume) SET_RUNTIME_PM_OPS(msm_otg_runtime_suspend, msm_otg_runtime_resume, msm_otg_runtime_idle) }; -#endif static struct platform_driver msm_otg_driver = { .remove = msm_otg_remove, .driver = { .name = DRIVER_NAME, .owner = THIS_MODULE, -#ifdef CONFIG_PM .pm = &msm_otg_dev_pm_ops, -#endif }, }; diff --git a/drivers/usb/phy/phy.c b/drivers/usb/phy/phy.c index e6f61e4361df..8afa813d690b 100644 --- a/drivers/usb/phy/phy.c +++ b/drivers/usb/phy/phy.c @@ -130,7 +130,7 @@ struct usb_phy *usb_get_phy(enum usb_phy_type type) phy = __usb_find_phy(&phy_list, type); if (IS_ERR(phy) || !try_module_get(phy->dev->driver->owner)) { - pr_err("unable to find transceiver of type %s\n", + pr_debug("PHY: unable to find transceiver of type %s\n", usb_phy_type_string(type)); goto err0; } @@ -228,7 +228,7 @@ struct usb_phy *usb_get_phy_dev(struct device *dev, u8 index) phy = __usb_find_phy_dev(dev, &phy_bind_list, index); if (IS_ERR(phy) || !try_module_get(phy->dev->driver->owner)) { - pr_err("unable to find transceiver\n"); + dev_dbg(dev, "unable to find transceiver\n"); goto err0; } @@ -424,10 +424,8 @@ int usb_bind_phy(const char *dev_name, u8 index, unsigned long flags; phy_bind = kzalloc(sizeof(*phy_bind), GFP_KERNEL); - if (!phy_bind) { - pr_err("phy_bind(): No memory for phy_bind"); + if (!phy_bind) return -ENOMEM; - } phy_bind->dev_name = dev_name; phy_bind->phy_dev_name = phy_dev_name; diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index ce0d7b0db012..44ab12986805 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -152,6 +152,7 @@ static const struct usb_device_id id_table_combined[] = { { USB_DEVICE(FTDI_VID, FTDI_CANUSB_PID) }, { USB_DEVICE(FTDI_VID, FTDI_CANDAPTER_PID) }, { USB_DEVICE(FTDI_VID, FTDI_NXTCAM_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_EV3CON_PID) }, { USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_0_PID) }, { USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_1_PID) }, { USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_2_PID) }, @@ -191,6 +192,8 @@ static const struct usb_device_id id_table_combined[] = { { USB_DEVICE(INTERBIOMETRICS_VID, INTERBIOMETRICS_IOBOARD_PID) }, { USB_DEVICE(INTERBIOMETRICS_VID, INTERBIOMETRICS_MINI_IOBOARD_PID) }, { USB_DEVICE(FTDI_VID, FTDI_SPROG_II) }, + { USB_DEVICE(FTDI_VID, FTDI_TAGSYS_LP101_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_TAGSYS_P200X_PID) }, { USB_DEVICE(FTDI_VID, FTDI_LENZ_LIUSB_PID) }, { USB_DEVICE(FTDI_VID, FTDI_XF_632_PID) }, { USB_DEVICE(FTDI_VID, FTDI_XF_634_PID) }, @@ -904,6 +907,8 @@ static const struct usb_device_id id_table_combined[] = { /* Crucible Devices */ { USB_DEVICE(FTDI_VID, FTDI_CT_COMET_PID) }, { USB_DEVICE(FTDI_VID, FTDI_Z3X_PID) }, + /* Cressi Devices */ + { USB_DEVICE(FTDI_VID, FTDI_CRESSI_PID) }, { } /* Terminating entry */ }; diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h index a7019d1e3058..e599fbfcde5f 100644 --- a/drivers/usb/serial/ftdi_sio_ids.h +++ b/drivers/usb/serial/ftdi_sio_ids.h @@ -50,6 +50,7 @@ #define TI_XDS100V2_PID 0xa6d0 #define FTDI_NXTCAM_PID 0xABB8 /* NXTCam for Mindstorms NXT */ +#define FTDI_EV3CON_PID 0xABB9 /* Mindstorms EV3 Console Adapter */ /* US Interface Navigator (http://www.usinterface.com/) */ #define FTDI_USINT_CAT_PID 0xb810 /* Navigator CAT and 2nd PTT lines */ @@ -363,6 +364,12 @@ /* Sprog II (Andrew Crosland's SprogII DCC interface) */ #define FTDI_SPROG_II 0xF0C8 +/* + * Two of the Tagsys RFID Readers + */ +#define FTDI_TAGSYS_LP101_PID 0xF0E9 /* Tagsys L-P101 RFID*/ +#define FTDI_TAGSYS_P200X_PID 0xF0EE /* Tagsys Medio P200x RFID*/ + /* an infrared receiver for user access control with IR tags */ #define FTDI_PIEGROUP_PID 0xF208 /* Product Id */ @@ -1313,3 +1320,9 @@ * Manufacturer: Smart GSM Team */ #define FTDI_Z3X_PID 0x0011 + +/* + * Product: Cressi PC Interface + * Manufacturer: Cressi + */ +#define FTDI_CRESSI_PID 0x87d0 diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 5c86f57e4afa..68fc9fe65936 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -1362,7 +1362,8 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1267, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1268, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1269, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1270, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1270, 0xff, 0xff, 0xff), + .driver_info = (kernel_ulong_t)&net_intf5_blacklist }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1271, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1272, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1273, 0xff, 0xff, 0xff) }, @@ -1525,7 +1526,8 @@ static const struct usb_device_id option_ids[] = { /* Cinterion */ { USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_EU3_E) }, { USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_EU3_P) }, - { USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_PH8) }, + { USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_PH8), + .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, { USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_AHXX) }, { USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_PLXX), .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, diff --git a/drivers/usb/serial/qcserial.c b/drivers/usb/serial/qcserial.c index c65437cfd4a2..968a40201e5f 100644 --- a/drivers/usb/serial/qcserial.c +++ b/drivers/usb/serial/qcserial.c @@ -139,6 +139,9 @@ static const struct usb_device_id id_table[] = { {USB_DEVICE_INTERFACE_NUMBER(0x1199, 0x901c, 0)}, /* Sierra Wireless EM7700 Device Management */ {USB_DEVICE_INTERFACE_NUMBER(0x1199, 0x901c, 2)}, /* Sierra Wireless EM7700 NMEA */ {USB_DEVICE_INTERFACE_NUMBER(0x1199, 0x901c, 3)}, /* Sierra Wireless EM7700 Modem */ + {USB_DEVICE_INTERFACE_NUMBER(0x1199, 0x9051, 0)}, /* Netgear AirCard 340U Device Management */ + {USB_DEVICE_INTERFACE_NUMBER(0x1199, 0x9051, 2)}, /* Netgear AirCard 340U NMEA */ + {USB_DEVICE_INTERFACE_NUMBER(0x1199, 0x9051, 3)}, /* Netgear AirCard 340U Modem */ { } /* Terminating entry */ }; diff --git a/drivers/usb/serial/usb-serial-simple.c b/drivers/usb/serial/usb-serial-simple.c index f112b079ddfc..fb79775447b0 100644 --- a/drivers/usb/serial/usb-serial-simple.c +++ b/drivers/usb/serial/usb-serial-simple.c @@ -71,7 +71,8 @@ DEVICE(hp4x, HP4X_IDS); /* Suunto ANT+ USB Driver */ #define SUUNTO_IDS() \ - { USB_DEVICE(0x0fcf, 0x1008) } + { USB_DEVICE(0x0fcf, 0x1008) }, \ + { USB_DEVICE(0x0fcf, 0x1009) } /* Dynastream ANT USB-m Stick */ DEVICE(suunto, SUUNTO_IDS); /* Siemens USB/MPI adapter */ diff --git a/drivers/usb/storage/Kconfig b/drivers/usb/storage/Kconfig index 8470e1b114f2..1dd0604d1911 100644 --- a/drivers/usb/storage/Kconfig +++ b/drivers/usb/storage/Kconfig @@ -18,7 +18,9 @@ config USB_STORAGE This option depends on 'SCSI' support being enabled, but you probably also need 'SCSI device support: SCSI disk support' - (BLK_DEV_SD) for most USB storage devices. + (BLK_DEV_SD) for most USB storage devices. Some devices also + will require 'Probe all LUNs on each SCSI device' + (SCSI_MULTI_LUN). To compile this driver as a module, choose M here: the module will be called usb-storage. diff --git a/drivers/usb/storage/scsiglue.c b/drivers/usb/storage/scsiglue.c index 18509e6c21ab..9d38ddc8da49 100644 --- a/drivers/usb/storage/scsiglue.c +++ b/drivers/usb/storage/scsiglue.c @@ -78,6 +78,8 @@ static const char* host_info(struct Scsi_Host *host) static int slave_alloc (struct scsi_device *sdev) { + struct us_data *us = host_to_us(sdev->host); + /* * Set the INQUIRY transfer length to 36. We don't use any of * the extra data and many devices choke if asked for more or @@ -102,6 +104,10 @@ static int slave_alloc (struct scsi_device *sdev) */ blk_queue_update_dma_alignment(sdev->request_queue, (512 - 1)); + /* Tell the SCSI layer if we know there is more than one LUN */ + if (us->protocol == USB_PR_BULK && us->max_lun > 0) + sdev->sdev_bflags |= BLIST_FORCELUN; + return 0; } diff --git a/drivers/usb/storage/unusual_cypress.h b/drivers/usb/storage/unusual_cypress.h index 65a6a75066a8..82e8ed0324e3 100644 --- a/drivers/usb/storage/unusual_cypress.h +++ b/drivers/usb/storage/unusual_cypress.h @@ -31,7 +31,7 @@ UNUSUAL_DEV( 0x04b4, 0x6831, 0x0000, 0x9999, "Cypress ISD-300LP", USB_SC_CYP_ATACB, USB_PR_DEVICE, NULL, 0), -UNUSUAL_DEV( 0x14cd, 0x6116, 0x0000, 0x0219, +UNUSUAL_DEV( 0x14cd, 0x6116, 0x0160, 0x0160, "Super Top", "USB 2.0 SATA BRIDGE", USB_SC_CYP_ATACB, USB_PR_DEVICE, NULL, 0), diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index ad06255c2ade..adbeb255616a 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -1455,6 +1455,13 @@ UNUSUAL_DEV( 0x0f88, 0x042e, 0x0100, 0x0100, USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_FIX_CAPACITY ), +/* Reported by Moritz Moeller-Herrmann <moritz-kernel@moeller-herrmann.de> */ +UNUSUAL_DEV( 0x0fca, 0x8004, 0x0201, 0x0201, + "Research In Motion", + "BlackBerry Bold 9000", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_MAX_SECTORS_64 ), + /* Reported by Michael Stattmann <michael@stattmann.com> */ UNUSUAL_DEV( 0x0fce, 0xd008, 0x0000, 0x0000, "Sony Ericsson", |