summaryrefslogtreecommitdiff
path: root/drivers/usb
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb')
-rw-r--r--drivers/usb/cdns3/gadget.c14
-rw-r--r--drivers/usb/chipidea/host.c4
-rw-r--r--drivers/usb/core/config.c82
-rw-r--r--drivers/usb/core/hub.c3
-rw-r--r--drivers/usb/dwc3/gadget.c7
-rw-r--r--drivers/usb/gadget/udc/Kconfig1
-rw-r--r--drivers/usb/host/ohci-da8xx.c8
-rw-r--r--drivers/usb/musb/jz4740.c7
-rw-r--r--drivers/usb/musb/musb_core.c11
-rw-r--r--drivers/usb/musb/musbhsdma.c2
-rw-r--r--drivers/usb/serial/ch341.c6
-rw-r--r--drivers/usb/serial/io_edgeport.c16
-rw-r--r--drivers/usb/serial/keyspan.c4
-rw-r--r--drivers/usb/serial/opticon.c2
-rw-r--r--drivers/usb/serial/option.c16
-rw-r--r--drivers/usb/serial/quatech2.c6
-rw-r--r--drivers/usb/serial/usb-serial-simple.c2
-rw-r--r--drivers/usb/serial/usb-serial.c3
-rw-r--r--drivers/usb/serial/usb-wwan.h1
-rw-r--r--drivers/usb/serial/usb_wwan.c4
-rw-r--r--drivers/usb/typec/tcpm/tcpci.c20
-rw-r--r--drivers/usb/typec/ucsi/ucsi.h18
22 files changed, 182 insertions, 55 deletions
diff --git a/drivers/usb/cdns3/gadget.c b/drivers/usb/cdns3/gadget.c
index 4c1e75509303..02f6ca2cb1ba 100644
--- a/drivers/usb/cdns3/gadget.c
+++ b/drivers/usb/cdns3/gadget.c
@@ -1375,13 +1375,10 @@ static void cdns3_check_usb_interrupt_proceed(struct cdns3_device *priv_dev,
*/
static irqreturn_t cdns3_device_irq_handler(int irq, void *data)
{
- struct cdns3_device *priv_dev;
- struct cdns3 *cdns = data;
+ struct cdns3_device *priv_dev = data;
irqreturn_t ret = IRQ_NONE;
u32 reg;
- priv_dev = cdns->gadget_dev;
-
/* check USB device interrupt */
reg = readl(&priv_dev->regs->usb_ists);
if (reg) {
@@ -1419,14 +1416,12 @@ static irqreturn_t cdns3_device_irq_handler(int irq, void *data)
*/
static irqreturn_t cdns3_device_thread_irq_handler(int irq, void *data)
{
- struct cdns3_device *priv_dev;
- struct cdns3 *cdns = data;
+ struct cdns3_device *priv_dev = data;
irqreturn_t ret = IRQ_NONE;
unsigned long flags;
int bit;
u32 reg;
- priv_dev = cdns->gadget_dev;
spin_lock_irqsave(&priv_dev->lock, flags);
reg = readl(&priv_dev->regs->usb_ists);
@@ -2539,7 +2534,7 @@ void cdns3_gadget_exit(struct cdns3 *cdns)
priv_dev = cdns->gadget_dev;
- devm_free_irq(cdns->dev, cdns->dev_irq, cdns);
+ devm_free_irq(cdns->dev, cdns->dev_irq, priv_dev);
pm_runtime_mark_last_busy(cdns->dev);
pm_runtime_put_autosuspend(cdns->dev);
@@ -2710,7 +2705,8 @@ static int __cdns3_gadget_init(struct cdns3 *cdns)
ret = devm_request_threaded_irq(cdns->dev, cdns->dev_irq,
cdns3_device_irq_handler,
cdns3_device_thread_irq_handler,
- IRQF_SHARED, dev_name(cdns->dev), cdns);
+ IRQF_SHARED, dev_name(cdns->dev),
+ cdns->gadget_dev);
if (ret)
goto err0;
diff --git a/drivers/usb/chipidea/host.c b/drivers/usb/chipidea/host.c
index b45ceb91c735..48e4a5ca1835 100644
--- a/drivers/usb/chipidea/host.c
+++ b/drivers/usb/chipidea/host.c
@@ -26,6 +26,7 @@ static int (*orig_bus_suspend)(struct usb_hcd *hcd);
struct ehci_ci_priv {
struct regulator *reg_vbus;
+ bool enabled;
};
static int ehci_ci_portpower(struct usb_hcd *hcd, int portnum, bool enable)
@@ -37,7 +38,7 @@ static int ehci_ci_portpower(struct usb_hcd *hcd, int portnum, bool enable)
int ret = 0;
int port = HCS_N_PORTS(ehci->hcs_params);
- if (priv->reg_vbus) {
+ if (priv->reg_vbus && enable != priv->enabled) {
if (port > 1) {
dev_warn(dev,
"Not support multi-port regulator control\n");
@@ -53,6 +54,7 @@ static int ehci_ci_portpower(struct usb_hcd *hcd, int portnum, bool enable)
enable ? "enable" : "disable", ret);
return ret;
}
+ priv->enabled = enable;
}
if (enable && (ci->platdata->phy_mode == USBPHY_INTERFACE_MODE_HSIC)) {
diff --git a/drivers/usb/core/config.c b/drivers/usb/core/config.c
index 5f40117e68e7..26bc05e48d8a 100644
--- a/drivers/usb/core/config.c
+++ b/drivers/usb/core/config.c
@@ -203,9 +203,58 @@ static const unsigned short super_speed_maxpacket_maxes[4] = {
[USB_ENDPOINT_XFER_INT] = 1024,
};
-static int usb_parse_endpoint(struct device *ddev, int cfgno, int inum,
- int asnum, struct usb_host_interface *ifp, int num_ep,
- unsigned char *buffer, int size)
+static bool endpoint_is_duplicate(struct usb_endpoint_descriptor *e1,
+ struct usb_endpoint_descriptor *e2)
+{
+ if (e1->bEndpointAddress == e2->bEndpointAddress)
+ return true;
+
+ if (usb_endpoint_xfer_control(e1) || usb_endpoint_xfer_control(e2)) {
+ if (usb_endpoint_num(e1) == usb_endpoint_num(e2))
+ return true;
+ }
+
+ return false;
+}
+
+/*
+ * Check for duplicate endpoint addresses in other interfaces and in the
+ * altsetting currently being parsed.
+ */
+static bool config_endpoint_is_duplicate(struct usb_host_config *config,
+ int inum, int asnum, struct usb_endpoint_descriptor *d)
+{
+ struct usb_endpoint_descriptor *epd;
+ struct usb_interface_cache *intfc;
+ struct usb_host_interface *alt;
+ int i, j, k;
+
+ for (i = 0; i < config->desc.bNumInterfaces; ++i) {
+ intfc = config->intf_cache[i];
+
+ for (j = 0; j < intfc->num_altsetting; ++j) {
+ alt = &intfc->altsetting[j];
+
+ if (alt->desc.bInterfaceNumber == inum &&
+ alt->desc.bAlternateSetting != asnum)
+ continue;
+
+ for (k = 0; k < alt->desc.bNumEndpoints; ++k) {
+ epd = &alt->endpoint[k].desc;
+
+ if (endpoint_is_duplicate(epd, d))
+ return true;
+ }
+ }
+ }
+
+ return false;
+}
+
+static int usb_parse_endpoint(struct device *ddev, int cfgno,
+ struct usb_host_config *config, int inum, int asnum,
+ struct usb_host_interface *ifp, int num_ep,
+ unsigned char *buffer, int size)
{
unsigned char *buffer0 = buffer;
struct usb_endpoint_descriptor *d;
@@ -242,13 +291,10 @@ static int usb_parse_endpoint(struct device *ddev, int cfgno, int inum,
goto skip_to_next_endpoint_or_interface_descriptor;
/* Check for duplicate endpoint addresses */
- for (i = 0; i < ifp->desc.bNumEndpoints; ++i) {
- if (ifp->endpoint[i].desc.bEndpointAddress ==
- d->bEndpointAddress) {
- dev_warn(ddev, "config %d interface %d altsetting %d has a duplicate endpoint with address 0x%X, skipping\n",
- cfgno, inum, asnum, d->bEndpointAddress);
- goto skip_to_next_endpoint_or_interface_descriptor;
- }
+ if (config_endpoint_is_duplicate(config, inum, asnum, d)) {
+ dev_warn(ddev, "config %d interface %d altsetting %d has a duplicate endpoint with address 0x%X, skipping\n",
+ cfgno, inum, asnum, d->bEndpointAddress);
+ goto skip_to_next_endpoint_or_interface_descriptor;
}
endpoint = &ifp->endpoint[ifp->desc.bNumEndpoints];
@@ -346,12 +392,16 @@ static int usb_parse_endpoint(struct device *ddev, int cfgno, int inum,
endpoint->desc.wMaxPacketSize = cpu_to_le16(8);
}
- /* Validate the wMaxPacketSize field */
+ /*
+ * Validate the wMaxPacketSize field.
+ * Some devices have isochronous endpoints in altsetting 0;
+ * the USB-2 spec requires such endpoints to have wMaxPacketSize = 0
+ * (see the end of section 5.6.3), so don't warn about them.
+ */
maxp = usb_endpoint_maxp(&endpoint->desc);
- if (maxp == 0) {
- dev_warn(ddev, "config %d interface %d altsetting %d endpoint 0x%X has wMaxPacketSize 0, skipping\n",
+ if (maxp == 0 && !(usb_endpoint_xfer_isoc(d) && asnum == 0)) {
+ dev_warn(ddev, "config %d interface %d altsetting %d endpoint 0x%X has invalid wMaxPacketSize 0\n",
cfgno, inum, asnum, d->bEndpointAddress);
- goto skip_to_next_endpoint_or_interface_descriptor;
}
/* Find the highest legal maxpacket size for this endpoint */
@@ -522,8 +572,8 @@ static int usb_parse_interface(struct device *ddev, int cfgno,
if (((struct usb_descriptor_header *) buffer)->bDescriptorType
== USB_DT_INTERFACE)
break;
- retval = usb_parse_endpoint(ddev, cfgno, inum, asnum, alt,
- num_ep, buffer, size);
+ retval = usb_parse_endpoint(ddev, cfgno, config, inum, asnum,
+ alt, num_ep, buffer, size);
if (retval < 0)
return retval;
++n;
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index f229ad6952c0..3405b146edc9 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -1192,6 +1192,7 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type)
* PORT_OVER_CURRENT is not. So check for any of them.
*/
if (udev || (portstatus & USB_PORT_STAT_CONNECTION) ||
+ (portchange & USB_PORT_STAT_C_CONNECTION) ||
(portstatus & USB_PORT_STAT_OVERCURRENT) ||
(portchange & USB_PORT_STAT_C_OVERCURRENT))
set_bit(port1, hub->change_bits);
@@ -2692,7 +2693,7 @@ static unsigned hub_is_wusb(struct usb_hub *hub)
#define SET_ADDRESS_TRIES 2
#define GET_DESCRIPTOR_TRIES 2
#define SET_CONFIG_TRIES (2 * (use_both_schemes + 1))
-#define USE_NEW_SCHEME(i, scheme) ((i) / 2 == (int)scheme)
+#define USE_NEW_SCHEME(i, scheme) ((i) / 2 == (int)(scheme))
#define HUB_ROOT_RESET_TIME 60 /* times are in msec */
#define HUB_SHORT_RESET_TIME 10
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 0c960a97ea02..154f3f3e8cff 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -2467,6 +2467,13 @@ static int dwc3_gadget_ep_reclaim_trb_linear(struct dwc3_ep *dep,
static bool dwc3_gadget_ep_request_completed(struct dwc3_request *req)
{
+ /*
+ * For OUT direction, host may send less than the setup
+ * length. Return true for all OUT requests.
+ */
+ if (!req->direction)
+ return true;
+
return req->request.actual == req->request.length;
}
diff --git a/drivers/usb/gadget/udc/Kconfig b/drivers/usb/gadget/udc/Kconfig
index ae70ce29d5e4..797d6ace8994 100644
--- a/drivers/usb/gadget/udc/Kconfig
+++ b/drivers/usb/gadget/udc/Kconfig
@@ -445,6 +445,7 @@ config USB_TEGRA_XUDC
tristate "NVIDIA Tegra Superspeed USB 3.0 Device Controller"
depends on ARCH_TEGRA || COMPILE_TEST
depends on PHY_TEGRA_XUSB
+ select USB_ROLE_SWITCH
help
Enables NVIDIA Tegra USB 3.0 device mode controller driver.
diff --git a/drivers/usb/host/ohci-da8xx.c b/drivers/usb/host/ohci-da8xx.c
index 38183ac438c6..1371b0c249ec 100644
--- a/drivers/usb/host/ohci-da8xx.c
+++ b/drivers/usb/host/ohci-da8xx.c
@@ -415,13 +415,17 @@ static int ohci_da8xx_probe(struct platform_device *pdev)
}
da8xx_ohci->oc_gpio = devm_gpiod_get_optional(dev, "oc", GPIOD_IN);
- if (IS_ERR(da8xx_ohci->oc_gpio))
+ if (IS_ERR(da8xx_ohci->oc_gpio)) {
+ error = PTR_ERR(da8xx_ohci->oc_gpio);
goto err;
+ }
if (da8xx_ohci->oc_gpio) {
oc_irq = gpiod_to_irq(da8xx_ohci->oc_gpio);
- if (oc_irq < 0)
+ if (oc_irq < 0) {
+ error = oc_irq;
goto err;
+ }
error = devm_request_threaded_irq(dev, oc_irq, NULL,
ohci_da8xx_oc_thread, IRQF_TRIGGER_RISING |
diff --git a/drivers/usb/musb/jz4740.c b/drivers/usb/musb/jz4740.c
index 5261f8dfedec..e3b8c84ccdb8 100644
--- a/drivers/usb/musb/jz4740.c
+++ b/drivers/usb/musb/jz4740.c
@@ -75,14 +75,17 @@ static struct musb_hdrc_platform_data jz4740_musb_platform_data = {
static int jz4740_musb_init(struct musb *musb)
{
struct device *dev = musb->controller->parent;
+ int err;
if (dev->of_node)
musb->xceiv = devm_usb_get_phy_by_phandle(dev, "phys", 0);
else
musb->xceiv = devm_usb_get_phy(dev, USB_PHY_TYPE_USB2);
if (IS_ERR(musb->xceiv)) {
- dev_err(dev, "No transceiver configured\n");
- return PTR_ERR(musb->xceiv);
+ err = PTR_ERR(musb->xceiv);
+ if (err != -EPROBE_DEFER)
+ dev_err(dev, "No transceiver configured: %d", err);
+ return err;
}
/* Silicon does not implement ConfigData register.
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index 15cca912c53e..5ebf30bd61bd 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -1840,6 +1840,9 @@ ATTRIBUTE_GROUPS(musb);
#define MUSB_QUIRK_B_INVALID_VBUS_91 (MUSB_DEVCTL_BDEVICE | \
(2 << MUSB_DEVCTL_VBUS_SHIFT) | \
MUSB_DEVCTL_SESSION)
+#define MUSB_QUIRK_B_DISCONNECT_99 (MUSB_DEVCTL_BDEVICE | \
+ (3 << MUSB_DEVCTL_VBUS_SHIFT) | \
+ MUSB_DEVCTL_SESSION)
#define MUSB_QUIRK_A_DISCONNECT_19 ((3 << MUSB_DEVCTL_VBUS_SHIFT) | \
MUSB_DEVCTL_SESSION)
@@ -1862,6 +1865,11 @@ static void musb_pm_runtime_check_session(struct musb *musb)
s = MUSB_DEVCTL_FSDEV | MUSB_DEVCTL_LSDEV |
MUSB_DEVCTL_HR;
switch (devctl & ~s) {
+ case MUSB_QUIRK_B_DISCONNECT_99:
+ musb_dbg(musb, "Poll devctl in case of suspend after disconnect\n");
+ schedule_delayed_work(&musb->irq_work,
+ msecs_to_jiffies(1000));
+ break;
case MUSB_QUIRK_B_INVALID_VBUS_91:
if (musb->quirk_retries && !musb->flush_irq_work) {
musb_dbg(musb,
@@ -2310,6 +2318,9 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl)
musb_disable_interrupts(musb);
musb_writeb(musb->mregs, MUSB_DEVCTL, 0);
+ /* MUSB_POWER_SOFTCONN might be already set, JZ4740 does this. */
+ musb_writeb(musb->mregs, MUSB_POWER, 0);
+
/* Init IRQ workqueue before request_irq */
INIT_DELAYED_WORK(&musb->irq_work, musb_irq_work);
INIT_DELAYED_WORK(&musb->deassert_reset_work, musb_deassert_reset);
diff --git a/drivers/usb/musb/musbhsdma.c b/drivers/usb/musb/musbhsdma.c
index 5fc6825745f2..2d3751d885b4 100644
--- a/drivers/usb/musb/musbhsdma.c
+++ b/drivers/usb/musb/musbhsdma.c
@@ -425,7 +425,7 @@ struct dma_controller *musbhs_dma_controller_create(struct musb *musb,
controller->controller.channel_abort = dma_channel_abort;
if (request_irq(irq, dma_controller_irq, 0,
- dev_name(musb->controller), &controller->controller)) {
+ dev_name(musb->controller), controller)) {
dev_err(dev, "request_irq %d failed!\n", irq);
musb_dma_controller_destroy(&controller->controller);
diff --git a/drivers/usb/serial/ch341.c b/drivers/usb/serial/ch341.c
index df582fe855f0..d3f420f3a083 100644
--- a/drivers/usb/serial/ch341.c
+++ b/drivers/usb/serial/ch341.c
@@ -642,9 +642,13 @@ static int ch341_tiocmget(struct tty_struct *tty)
static int ch341_reset_resume(struct usb_serial *serial)
{
struct usb_serial_port *port = serial->port[0];
- struct ch341_private *priv = usb_get_serial_port_data(port);
+ struct ch341_private *priv;
int ret;
+ priv = usb_get_serial_port_data(port);
+ if (!priv)
+ return 0;
+
/* reconfigure ch341 serial port after bus-reset */
ch341_configure(serial->dev, priv);
diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c
index 9690a5f4b9d6..5737add6a2a4 100644
--- a/drivers/usb/serial/io_edgeport.c
+++ b/drivers/usb/serial/io_edgeport.c
@@ -716,7 +716,7 @@ static void edge_interrupt_callback(struct urb *urb)
if (txCredits) {
port = edge_serial->serial->port[portNumber];
edge_port = usb_get_serial_port_data(port);
- if (edge_port->open) {
+ if (edge_port && edge_port->open) {
spin_lock_irqsave(&edge_port->ep_lock,
flags);
edge_port->txCredits += txCredits;
@@ -1725,7 +1725,8 @@ static void edge_break(struct tty_struct *tty, int break_state)
static void process_rcvd_data(struct edgeport_serial *edge_serial,
unsigned char *buffer, __u16 bufferLength)
{
- struct device *dev = &edge_serial->serial->dev->dev;
+ struct usb_serial *serial = edge_serial->serial;
+ struct device *dev = &serial->dev->dev;
struct usb_serial_port *port;
struct edgeport_port *edge_port;
__u16 lastBufferLength;
@@ -1821,11 +1822,10 @@ static void process_rcvd_data(struct edgeport_serial *edge_serial,
/* spit this data back into the tty driver if this
port is open */
- if (rxLen) {
- port = edge_serial->serial->port[
- edge_serial->rxPort];
+ if (rxLen && edge_serial->rxPort < serial->num_ports) {
+ port = serial->port[edge_serial->rxPort];
edge_port = usb_get_serial_port_data(port);
- if (edge_port->open) {
+ if (edge_port && edge_port->open) {
dev_dbg(dev, "%s - Sending %d bytes to TTY for port %d\n",
__func__, rxLen,
edge_serial->rxPort);
@@ -1833,8 +1833,8 @@ static void process_rcvd_data(struct edgeport_serial *edge_serial,
rxLen);
edge_port->port->icount.rx += rxLen;
}
- buffer += rxLen;
}
+ buffer += rxLen;
break;
case EXPECT_HDR3: /* Expect 3rd byte of status header */
@@ -1869,6 +1869,8 @@ static void process_rcvd_status(struct edgeport_serial *edge_serial,
__u8 code = edge_serial->rxStatusCode;
/* switch the port pointer to the one being currently talked about */
+ if (edge_serial->rxPort >= edge_serial->serial->num_ports)
+ return;
port = edge_serial->serial->port[edge_serial->rxPort];
edge_port = usb_get_serial_port_data(port);
if (edge_port == NULL) {
diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c
index e66a59ef43a1..aa3dbce22cfb 100644
--- a/drivers/usb/serial/keyspan.c
+++ b/drivers/usb/serial/keyspan.c
@@ -1058,6 +1058,8 @@ static void usa49_glocont_callback(struct urb *urb)
for (i = 0; i < serial->num_ports; ++i) {
port = serial->port[i];
p_priv = usb_get_serial_port_data(port);
+ if (!p_priv)
+ continue;
if (p_priv->resend_cont) {
dev_dbg(&port->dev, "%s - sending setup\n", __func__);
@@ -1459,6 +1461,8 @@ static void usa67_glocont_callback(struct urb *urb)
for (i = 0; i < serial->num_ports; ++i) {
port = serial->port[i];
p_priv = usb_get_serial_port_data(port);
+ if (!p_priv)
+ continue;
if (p_priv->resend_cont) {
dev_dbg(&port->dev, "%s - sending setup\n", __func__);
diff --git a/drivers/usb/serial/opticon.c b/drivers/usb/serial/opticon.c
index cb7aac9cd9e7..ed2b4e6dca38 100644
--- a/drivers/usb/serial/opticon.c
+++ b/drivers/usb/serial/opticon.c
@@ -113,7 +113,7 @@ static int send_control_msg(struct usb_serial_port *port, u8 requesttype,
retval = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
requesttype,
USB_DIR_OUT|USB_TYPE_VENDOR|USB_RECIP_INTERFACE,
- 0, 0, buffer, 1, 0);
+ 0, 0, buffer, 1, USB_CTRL_SET_TIMEOUT);
kfree(buffer);
if (retval < 0)
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index e9491d400a24..084cc2fff3ae 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -248,6 +248,7 @@ static void option_instat_callback(struct urb *urb);
#define QUECTEL_PRODUCT_BG96 0x0296
#define QUECTEL_PRODUCT_EP06 0x0306
#define QUECTEL_PRODUCT_EM12 0x0512
+#define QUECTEL_PRODUCT_RM500Q 0x0800
#define CMOTECH_VENDOR_ID 0x16d8
#define CMOTECH_PRODUCT_6001 0x6001
@@ -567,6 +568,9 @@ static void option_instat_callback(struct urb *urb);
/* Interface must have two endpoints */
#define NUMEP2 BIT(16)
+/* Device needs ZLP */
+#define ZLP BIT(17)
+
static const struct usb_device_id option_ids[] = {
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COLT) },
@@ -1101,6 +1105,11 @@ static const struct usb_device_id option_ids[] = {
{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM12, 0xff, 0xff, 0xff),
.driver_info = RSVD(1) | RSVD(2) | RSVD(3) | RSVD(4) | NUMEP2 },
{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM12, 0xff, 0, 0) },
+ { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM500Q, 0xff, 0xff, 0x30) },
+ { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM500Q, 0xff, 0, 0) },
+ { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM500Q, 0xff, 0xff, 0x10),
+ .driver_info = ZLP },
+
{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6001) },
{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CMU_300) },
{ USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6003),
@@ -1172,6 +1181,8 @@ static const struct usb_device_id option_ids[] = {
.driver_info = NCTRL(0) | RSVD(3) },
{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1102, 0xff), /* Telit ME910 (ECM) */
.driver_info = NCTRL(0) },
+ { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x110a, 0xff), /* Telit ME910G1 */
+ .driver_info = NCTRL(0) | RSVD(3) },
{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE910),
.driver_info = NCTRL(0) | RSVD(1) | RSVD(2) },
{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE910_USBCFG4),
@@ -1196,6 +1207,8 @@ static const struct usb_device_id option_ids[] = {
.driver_info = NCTRL(0) | RSVD(1) },
{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1901, 0xff), /* Telit LN940 (MBIM) */
.driver_info = NCTRL(0) },
+ { USB_DEVICE(TELIT_VENDOR_ID, 0x9010), /* Telit SBL FN980 flashing device */
+ .driver_info = NCTRL(0) | ZLP },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MF622, 0xff, 0xff, 0xff) }, /* ZTE WCDMA products */
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0002, 0xff, 0xff, 0xff),
.driver_info = RSVD(1) },
@@ -2097,6 +2110,9 @@ static int option_attach(struct usb_serial *serial)
if (!(device_flags & NCTRL(iface_desc->bInterfaceNumber)))
data->use_send_setup = 1;
+ if (device_flags & ZLP)
+ data->use_zlp = 1;
+
spin_lock_init(&data->susp_lock);
usb_set_serial_data(serial, data);
diff --git a/drivers/usb/serial/quatech2.c b/drivers/usb/serial/quatech2.c
index a62981ca7a73..f93b81a297d6 100644
--- a/drivers/usb/serial/quatech2.c
+++ b/drivers/usb/serial/quatech2.c
@@ -841,7 +841,10 @@ static void qt2_update_msr(struct usb_serial_port *port, unsigned char *ch)
u8 newMSR = (u8) *ch;
unsigned long flags;
+ /* May be called from qt2_process_read_urb() for an unbound port. */
port_priv = usb_get_serial_port_data(port);
+ if (!port_priv)
+ return;
spin_lock_irqsave(&port_priv->lock, flags);
port_priv->shadowMSR = newMSR;
@@ -869,7 +872,10 @@ static void qt2_update_lsr(struct usb_serial_port *port, unsigned char *ch)
unsigned long flags;
u8 newLSR = (u8) *ch;
+ /* May be called from qt2_process_read_urb() for an unbound port. */
port_priv = usb_get_serial_port_data(port);
+ if (!port_priv)
+ return;
if (newLSR & UART_LSR_BI)
newLSR &= (u8) (UART_LSR_OE | UART_LSR_BI);
diff --git a/drivers/usb/serial/usb-serial-simple.c b/drivers/usb/serial/usb-serial-simple.c
index edbbb13d6de6..bd23a7cb1be2 100644
--- a/drivers/usb/serial/usb-serial-simple.c
+++ b/drivers/usb/serial/usb-serial-simple.c
@@ -86,6 +86,8 @@ DEVICE(moto_modem, MOTO_IDS);
#define MOTOROLA_TETRA_IDS() \
{ USB_DEVICE(0x0cad, 0x9011) }, /* Motorola Solutions TETRA PEI */ \
{ USB_DEVICE(0x0cad, 0x9012) }, /* MTP6550 */ \
+ { USB_DEVICE(0x0cad, 0x9013) }, /* MTP3xxx */ \
+ { USB_DEVICE(0x0cad, 0x9015) }, /* MTP85xx */ \
{ USB_DEVICE(0x0cad, 0x9016) } /* TPG2200 */
DEVICE(motorola_tetra, MOTOROLA_TETRA_IDS);
diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index 8f066bb55d7d..dc7a65b9ec98 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -1317,6 +1317,9 @@ static int usb_serial_register(struct usb_serial_driver *driver)
return -EINVAL;
}
+ /* Prevent individual ports from being unbound. */
+ driver->driver.suppress_bind_attrs = true;
+
usb_serial_operations_init(driver);
/* Add this device to our list of devices */
diff --git a/drivers/usb/serial/usb-wwan.h b/drivers/usb/serial/usb-wwan.h
index 1c120eaf4091..934e9361cf6b 100644
--- a/drivers/usb/serial/usb-wwan.h
+++ b/drivers/usb/serial/usb-wwan.h
@@ -38,6 +38,7 @@ struct usb_wwan_intf_private {
spinlock_t susp_lock;
unsigned int suspended:1;
unsigned int use_send_setup:1;
+ unsigned int use_zlp:1;
int in_flight;
unsigned int open_ports;
void *private;
diff --git a/drivers/usb/serial/usb_wwan.c b/drivers/usb/serial/usb_wwan.c
index 7e855c87e4f7..13be21aad2f4 100644
--- a/drivers/usb/serial/usb_wwan.c
+++ b/drivers/usb/serial/usb_wwan.c
@@ -461,6 +461,7 @@ static struct urb *usb_wwan_setup_urb(struct usb_serial_port *port,
void (*callback) (struct urb *))
{
struct usb_serial *serial = port->serial;
+ struct usb_wwan_intf_private *intfdata = usb_get_serial_data(serial);
struct urb *urb;
urb = usb_alloc_urb(0, GFP_KERNEL); /* No ISO */
@@ -471,6 +472,9 @@ static struct urb *usb_wwan_setup_urb(struct usb_serial_port *port,
usb_sndbulkpipe(serial->dev, endpoint) | dir,
buf, len, callback, ctx);
+ if (intfdata->use_zlp && dir == USB_DIR_OUT)
+ urb->transfer_flags |= URB_ZERO_PACKET;
+
return urb;
}
diff --git a/drivers/usb/typec/tcpm/tcpci.c b/drivers/usb/typec/tcpm/tcpci.c
index c1f7073a56de..8b4ff9fff340 100644
--- a/drivers/usb/typec/tcpm/tcpci.c
+++ b/drivers/usb/typec/tcpm/tcpci.c
@@ -432,20 +432,30 @@ irqreturn_t tcpci_irq(struct tcpci *tcpci)
if (status & TCPC_ALERT_RX_STATUS) {
struct pd_message msg;
- unsigned int cnt;
+ unsigned int cnt, payload_cnt;
u16 header;
regmap_read(tcpci->regmap, TCPC_RX_BYTE_CNT, &cnt);
+ /*
+ * 'cnt' corresponds to READABLE_BYTE_COUNT in section 4.4.14
+ * of the TCPCI spec [Rev 2.0 Ver 1.0 October 2017] and is
+ * defined in table 4-36 as one greater than the number of
+ * bytes received. And that number includes the header. So:
+ */
+ if (cnt > 3)
+ payload_cnt = cnt - (1 + sizeof(msg.header));
+ else
+ payload_cnt = 0;
tcpci_read16(tcpci, TCPC_RX_HDR, &header);
msg.header = cpu_to_le16(header);
- if (WARN_ON(cnt > sizeof(msg.payload)))
- cnt = sizeof(msg.payload);
+ if (WARN_ON(payload_cnt > sizeof(msg.payload)))
+ payload_cnt = sizeof(msg.payload);
- if (cnt > 0)
+ if (payload_cnt > 0)
regmap_raw_read(tcpci->regmap, TCPC_RX_DATA,
- &msg.payload, cnt);
+ &msg.payload, payload_cnt);
/* Read complete, clear RX status alert bit */
tcpci_write16(tcpci, TCPC_ALERT, TCPC_ALERT_RX_STATUS);
diff --git a/drivers/usb/typec/ucsi/ucsi.h b/drivers/usb/typec/ucsi/ucsi.h
index 8569bbd3762f..831c9470bdc1 100644
--- a/drivers/usb/typec/ucsi/ucsi.h
+++ b/drivers/usb/typec/ucsi/ucsi.h
@@ -94,15 +94,15 @@ void ucsi_connector_change(struct ucsi *ucsi, u8 num);
#define UCSI_ENABLE_NTFY_CMD_COMPLETE BIT(16)
#define UCSI_ENABLE_NTFY_EXT_PWR_SRC_CHANGE BIT(17)
#define UCSI_ENABLE_NTFY_PWR_OPMODE_CHANGE BIT(18)
-#define UCSI_ENABLE_NTFY_CAP_CHANGE BIT(19)
-#define UCSI_ENABLE_NTFY_PWR_LEVEL_CHANGE BIT(20)
-#define UCSI_ENABLE_NTFY_PD_RESET_COMPLETE BIT(21)
-#define UCSI_ENABLE_NTFY_CAM_CHANGE BIT(22)
-#define UCSI_ENABLE_NTFY_BAT_STATUS_CHANGE BIT(23)
-#define UCSI_ENABLE_NTFY_PARTNER_CHANGE BIT(24)
-#define UCSI_ENABLE_NTFY_PWR_DIR_CHANGE BIT(25)
-#define UCSI_ENABLE_NTFY_CONNECTOR_CHANGE BIT(26)
-#define UCSI_ENABLE_NTFY_ERROR BIT(27)
+#define UCSI_ENABLE_NTFY_CAP_CHANGE BIT(21)
+#define UCSI_ENABLE_NTFY_PWR_LEVEL_CHANGE BIT(22)
+#define UCSI_ENABLE_NTFY_PD_RESET_COMPLETE BIT(23)
+#define UCSI_ENABLE_NTFY_CAM_CHANGE BIT(24)
+#define UCSI_ENABLE_NTFY_BAT_STATUS_CHANGE BIT(25)
+#define UCSI_ENABLE_NTFY_PARTNER_CHANGE BIT(27)
+#define UCSI_ENABLE_NTFY_PWR_DIR_CHANGE BIT(28)
+#define UCSI_ENABLE_NTFY_CONNECTOR_CHANGE BIT(30)
+#define UCSI_ENABLE_NTFY_ERROR BIT(31)
#define UCSI_ENABLE_NTFY_ALL 0xdbe70000
/* SET_UOR command bits */
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-23 01:27:57 +0300