diff options
Diffstat (limited to 'drivers/usb')
| -rw-r--r-- | drivers/usb/core/devio.c | 2 | ||||
| -rw-r--r-- | drivers/usb/core/hub.c | 33 | ||||
| -rw-r--r-- | drivers/usb/storage/transport.c | 4 |
3 files changed, 20 insertions, 19 deletions
diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c index bc1cce5cf758..e09935acae80 100644 --- a/drivers/usb/core/devio.c +++ b/drivers/usb/core/devio.c @@ -872,7 +872,7 @@ static int proc_connectinfo(struct dev_state *ps, void __user *arg) static int proc_resetdevice(struct dev_state *ps) { - return usb_reset_composite_device(ps->dev); + return usb_reset_device(ps->dev); } static int proc_setintf(struct dev_state *ps, void __user *arg) diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 207c33d369be..bb3ecc4c08f2 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -135,6 +135,8 @@ EXPORT_SYMBOL_GPL(ehci_cf_port_reset_rwsem); #define HUB_DEBOUNCE_STABLE 100 +static int usb_reset_and_verify_device(struct usb_device *udev); + static inline char *portspeed(int portstatus) { if (portstatus & (1 << USB_PORT_FEAT_HIGHSPEED)) @@ -1971,7 +1973,7 @@ static int finish_port_resume(struct usb_device *udev) * resumed. */ if (udev->reset_resume) - status = usb_reset_device(udev); + status = usb_reset_and_verify_device(udev); /* 10.5.4.5 says be sure devices in the tree are still there. * For now let's assume the device didn't go crazy on resume, @@ -2030,7 +2032,7 @@ static int finish_port_resume(struct usb_device *udev) * to it will be lost. Using the USB_PERSIST facility, the device can be * made to appear as if it had not disconnected. * - * This facility can be dangerous. Although usb_reset_device() makes + * This facility can be dangerous. Although usb_reset_and_verify_device() makes * every effort to insure that the same device is present after the * reset as before, it cannot provide a 100% guarantee. Furthermore it's * quite possible for a device to remain unaltered but its media to be @@ -2140,7 +2142,7 @@ int usb_port_resume(struct usb_device *udev) hub_port_logical_disconnect(hub, port1); } else if (udev->reset_resume) { dev_dbg(&udev->dev, "reset-resume\n"); - status = usb_reset_device(udev); + status = usb_reset_and_verify_device(udev); } return status; } @@ -2321,7 +2323,7 @@ static int hub_set_address(struct usb_device *udev, int devnum) * Returns device in USB_STATE_ADDRESS, except on error. * * If this is called for an already-existing device (as part of - * usb_reset_device), the caller must own the device lock. For a + * usb_reset_and_verify_device), the caller must own the device lock. For a * newly detected device that is not accessible through any global * pointers, it's not necessary to lock the device. */ @@ -2638,7 +2640,7 @@ hub_power_remaining (struct usb_hub *hub) * This routine is called when: * a port connection-change occurs; * a port enable-change occurs (often caused by EMI); - * usb_reset_device() encounters changed descriptors (as from + * usb_reset_and_verify_device() encounters changed descriptors (as from * a firmware download) * caller already locked the hub */ @@ -2712,7 +2714,7 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1, #endif } else { - status = usb_reset_composite_device(udev); + status = usb_reset_device(udev); } usb_unlock_device(udev); @@ -2940,7 +2942,7 @@ static void hub_events(void) dev_dbg (hub_dev, "resetting for error %d\n", hub->error); - ret = usb_reset_composite_device(hdev); + ret = usb_reset_device(hdev); if (ret) { dev_dbg (hub_dev, "error resetting hub: %d\n", ret); @@ -3233,12 +3235,12 @@ static int descriptors_changed(struct usb_device *udev, } /** - * usb_reset_device - perform a USB port reset to reinitialize a device + * usb_reset_and_verify_device - perform a USB port reset to reinitialize a device * @udev: device to reset (not in SUSPENDED or NOTATTACHED state) * * WARNING - don't use this routine to reset a composite device * (one with multiple interfaces owned by separate drivers)! - * Use usb_reset_composite_device() instead. + * Use usb_reset_device() instead. * * Do a port reset, reassign the device's address, and establish its * former operating configuration. If the reset fails, or the device's @@ -3262,7 +3264,7 @@ static int descriptors_changed(struct usb_device *udev, * holding the device lock because these tasks should always call * usb_autopm_resume_device(), thereby preventing any unwanted autoresume. */ -int usb_reset_device(struct usb_device *udev) +static int usb_reset_and_verify_device(struct usb_device *udev) { struct usb_device *parent_hdev = udev->parent; struct usb_hub *parent_hub; @@ -3350,24 +3352,23 @@ re_enumerate: hub_port_logical_disconnect(parent_hub, port1); return -ENODEV; } -EXPORT_SYMBOL_GPL(usb_reset_device); /** - * usb_reset_composite_device - warn interface drivers and perform a USB port reset + * usb_reset_device - warn interface drivers and perform a USB port reset * @udev: device to reset (not in SUSPENDED or NOTATTACHED state) * * Warns all drivers bound to registered interfaces (using their pre_reset * method), performs the port reset, and then lets the drivers know that * the reset is over (using their post_reset method). * - * Return value is the same as for usb_reset_device(). + * Return value is the same as for usb_reset_and_verify_device(). * * The caller must own the device lock. For example, it's safe to use * this from a driver probe() routine after downloading new firmware. * For calls that might not occur during probe(), drivers should lock * the device using usb_lock_device_for_reset(). */ -int usb_reset_composite_device(struct usb_device *udev) +int usb_reset_device(struct usb_device *udev) { int ret; int i; @@ -3397,7 +3398,7 @@ int usb_reset_composite_device(struct usb_device *udev) } } - ret = usb_reset_device(udev); + ret = usb_reset_and_verify_device(udev); if (config) { for (i = config->desc.bNumInterfaces - 1; i >= 0; --i) { @@ -3416,4 +3417,4 @@ int usb_reset_composite_device(struct usb_device *udev) usb_autosuspend_device(udev); return ret; } -EXPORT_SYMBOL_GPL(usb_reset_composite_device); +EXPORT_SYMBOL_GPL(usb_reset_device); diff --git a/drivers/usb/storage/transport.c b/drivers/usb/storage/transport.c index 670e4cbd1f06..fcbbfdb7b2b0 100644 --- a/drivers/usb/storage/transport.c +++ b/drivers/usb/storage/transport.c @@ -1172,8 +1172,8 @@ int usb_stor_port_reset(struct us_data *us) result = -EIO; US_DEBUGP("No reset during disconnect\n"); } else { - result = usb_reset_composite_device(us->pusb_dev); - US_DEBUGP("usb_reset_composite_device returns %d\n", + result = usb_reset_device(us->pusb_dev); + US_DEBUGP("usb_reset_device returns %d\n", result); } if (rc_lock) |