summaryrefslogtreecommitdiff
path: root/drivers/usb/serial
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/serial')
-rw-r--r--drivers/usb/serial/ch341.c108
-rw-r--r--drivers/usb/serial/kl5kusb105.c9
-rw-r--r--drivers/usb/serial/option.c1
-rw-r--r--drivers/usb/serial/pl2303.c1
-rw-r--r--drivers/usb/serial/pl2303.h1
-rw-r--r--drivers/usb/serial/qcserial.c1
6 files changed, 82 insertions, 39 deletions
diff --git a/drivers/usb/serial/ch341.c b/drivers/usb/serial/ch341.c
index 2597b83a8ae2..95aa5233726c 100644
--- a/drivers/usb/serial/ch341.c
+++ b/drivers/usb/serial/ch341.c
@@ -95,6 +95,7 @@ struct ch341_private {
unsigned baud_rate; /* set baud rate */
u8 line_control; /* set line control value RTS/DTR */
u8 line_status; /* active status of modem control inputs */
+ u8 lcr;
};
static void ch341_set_termios(struct tty_struct *tty,
@@ -112,6 +113,8 @@ static int ch341_control_out(struct usb_device *dev, u8 request,
r = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), request,
USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT,
value, index, NULL, 0, DEFAULT_TIMEOUT);
+ if (r < 0)
+ dev_err(&dev->dev, "failed to send control message: %d\n", r);
return r;
}
@@ -129,11 +132,24 @@ static int ch341_control_in(struct usb_device *dev,
r = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), request,
USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
value, index, buf, bufsize, DEFAULT_TIMEOUT);
- return r;
+ if (r < bufsize) {
+ if (r >= 0) {
+ dev_err(&dev->dev,
+ "short control message received (%d < %u)\n",
+ r, bufsize);
+ r = -EIO;
+ }
+
+ dev_err(&dev->dev, "failed to receive control message: %d\n",
+ r);
+ return r;
+ }
+
+ return 0;
}
-static int ch341_init_set_baudrate(struct usb_device *dev,
- struct ch341_private *priv, unsigned ctrl)
+static int ch341_set_baudrate_lcr(struct usb_device *dev,
+ struct ch341_private *priv, u8 lcr)
{
short a;
int r;
@@ -156,9 +172,19 @@ static int ch341_init_set_baudrate(struct usb_device *dev,
factor = 0x10000 - factor;
a = (factor & 0xff00) | divisor;
- /* 0x9c is "enable SFR_UART Control register and timer" */
- r = ch341_control_out(dev, CH341_REQ_SERIAL_INIT,
- 0x9c | (ctrl << 8), a | 0x80);
+ /*
+ * CH341A buffers data until a full endpoint-size packet (32 bytes)
+ * has been received unless bit 7 is set.
+ */
+ a |= BIT(7);
+
+ r = ch341_control_out(dev, CH341_REQ_WRITE_REG, 0x1312, a);
+ if (r)
+ return r;
+
+ r = ch341_control_out(dev, CH341_REQ_WRITE_REG, 0x2518, lcr);
+ if (r)
+ return r;
return r;
}
@@ -170,9 +196,9 @@ static int ch341_set_handshake(struct usb_device *dev, u8 control)
static int ch341_get_status(struct usb_device *dev, struct ch341_private *priv)
{
+ const unsigned int size = 2;
char *buffer;
int r;
- const unsigned size = 8;
unsigned long flags;
buffer = kmalloc(size, GFP_KERNEL);
@@ -183,14 +209,9 @@ static int ch341_get_status(struct usb_device *dev, struct ch341_private *priv)
if (r < 0)
goto out;
- /* setup the private status if available */
- if (r == 2) {
- r = 0;
- spin_lock_irqsave(&priv->lock, flags);
- priv->line_status = (~(*buffer)) & CH341_BITS_MODEM_STAT;
- spin_unlock_irqrestore(&priv->lock, flags);
- } else
- r = -EPROTO;
+ spin_lock_irqsave(&priv->lock, flags);
+ priv->line_status = (~(*buffer)) & CH341_BITS_MODEM_STAT;
+ spin_unlock_irqrestore(&priv->lock, flags);
out: kfree(buffer);
return r;
@@ -200,9 +221,9 @@ out: kfree(buffer);
static int ch341_configure(struct usb_device *dev, struct ch341_private *priv)
{
+ const unsigned int size = 2;
char *buffer;
int r;
- const unsigned size = 8;
buffer = kmalloc(size, GFP_KERNEL);
if (!buffer)
@@ -232,7 +253,7 @@ static int ch341_configure(struct usb_device *dev, struct ch341_private *priv)
if (r < 0)
goto out;
- r = ch341_init_set_baudrate(dev, priv, 0);
+ r = ch341_set_baudrate_lcr(dev, priv, priv->lcr);
if (r < 0)
goto out;
@@ -258,7 +279,6 @@ static int ch341_port_probe(struct usb_serial_port *port)
spin_lock_init(&priv->lock);
priv->baud_rate = DEFAULT_BAUD_RATE;
- priv->line_control = CH341_BIT_RTS | CH341_BIT_DTR;
r = ch341_configure(port->serial->dev, priv);
if (r < 0)
@@ -320,7 +340,7 @@ static int ch341_open(struct tty_struct *tty, struct usb_serial_port *port)
r = ch341_configure(serial->dev, priv);
if (r)
- goto out;
+ return r;
if (tty)
ch341_set_termios(tty, port, NULL);
@@ -330,12 +350,19 @@ static int ch341_open(struct tty_struct *tty, struct usb_serial_port *port)
if (r) {
dev_err(&port->dev, "%s - failed to submit interrupt urb: %d\n",
__func__, r);
- goto out;
+ return r;
}
r = usb_serial_generic_open(tty, port);
+ if (r)
+ goto err_kill_interrupt_urb;
+
+ return 0;
+
+err_kill_interrupt_urb:
+ usb_kill_urb(port->interrupt_in_urb);
-out: return r;
+ return r;
}
/* Old_termios contains the original termios settings and
@@ -356,7 +383,6 @@ static void ch341_set_termios(struct tty_struct *tty,
baud_rate = tty_get_baud_rate(tty);
- priv->baud_rate = baud_rate;
ctrl = CH341_LCR_ENABLE_RX | CH341_LCR_ENABLE_TX;
switch (C_CSIZE(tty)) {
@@ -386,22 +412,25 @@ static void ch341_set_termios(struct tty_struct *tty,
ctrl |= CH341_LCR_STOP_BITS_2;
if (baud_rate) {
- spin_lock_irqsave(&priv->lock, flags);
- priv->line_control |= (CH341_BIT_DTR | CH341_BIT_RTS);
- spin_unlock_irqrestore(&priv->lock, flags);
- r = ch341_init_set_baudrate(port->serial->dev, priv, ctrl);
+ priv->baud_rate = baud_rate;
+
+ r = ch341_set_baudrate_lcr(port->serial->dev, priv, ctrl);
if (r < 0 && old_termios) {
priv->baud_rate = tty_termios_baud_rate(old_termios);
tty_termios_copy_hw(&tty->termios, old_termios);
+ } else if (r == 0) {
+ priv->lcr = ctrl;
}
- } else {
- spin_lock_irqsave(&priv->lock, flags);
- priv->line_control &= ~(CH341_BIT_DTR | CH341_BIT_RTS);
- spin_unlock_irqrestore(&priv->lock, flags);
}
- ch341_set_handshake(port->serial->dev, priv->line_control);
+ spin_lock_irqsave(&priv->lock, flags);
+ if (C_BAUD(tty) == B0)
+ priv->line_control &= ~(CH341_BIT_DTR | CH341_BIT_RTS);
+ else if (old_termios && (old_termios->c_cflag & CBAUD) == B0)
+ priv->line_control |= (CH341_BIT_DTR | CH341_BIT_RTS);
+ spin_unlock_irqrestore(&priv->lock, flags);
+ ch341_set_handshake(port->serial->dev, priv->line_control);
}
static void ch341_break_ctl(struct tty_struct *tty, int break_state)
@@ -576,14 +605,23 @@ static int ch341_tiocmget(struct tty_struct *tty)
static int ch341_reset_resume(struct usb_serial *serial)
{
- struct ch341_private *priv;
-
- priv = usb_get_serial_port_data(serial->port[0]);
+ struct usb_serial_port *port = serial->port[0];
+ struct ch341_private *priv = usb_get_serial_port_data(port);
+ int ret;
/* reconfigure ch341 serial port after bus-reset */
ch341_configure(serial->dev, priv);
- return 0;
+ if (tty_port_initialized(&port->port)) {
+ ret = usb_submit_urb(port->interrupt_in_urb, GFP_NOIO);
+ if (ret) {
+ dev_err(&port->dev, "failed to submit interrupt urb: %d\n",
+ ret);
+ return ret;
+ }
+ }
+
+ return usb_serial_generic_resume(serial);
}
static struct usb_serial_driver ch341_device = {
diff --git a/drivers/usb/serial/kl5kusb105.c b/drivers/usb/serial/kl5kusb105.c
index 0ee190fc1bf8..6cb45757818f 100644
--- a/drivers/usb/serial/kl5kusb105.c
+++ b/drivers/usb/serial/kl5kusb105.c
@@ -192,10 +192,11 @@ static int klsi_105_get_line_state(struct usb_serial_port *port,
status_buf, KLSI_STATUSBUF_LEN,
10000
);
- if (rc < 0)
- dev_err(&port->dev, "Reading line status failed (error = %d)\n",
- rc);
- else {
+ if (rc != KLSI_STATUSBUF_LEN) {
+ dev_err(&port->dev, "reading line status failed: %d\n", rc);
+ if (rc >= 0)
+ rc = -EIO;
+ } else {
status = get_unaligned_le16(status_buf);
dev_info(&port->serial->dev->dev, "read status %x %x\n",
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 7ce31a4c7e7f..42cc72e54c05 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -2007,6 +2007,7 @@ static const struct usb_device_id option_ids[] = {
{ USB_DEVICE_AND_INTERFACE_INFO(WETELECOM_VENDOR_ID, WETELECOM_PRODUCT_WMD200, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(WETELECOM_VENDOR_ID, WETELECOM_PRODUCT_6802, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(WETELECOM_VENDOR_ID, WETELECOM_PRODUCT_WMD300, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(0x03f0, 0x421d, 0xff, 0xff, 0xff) }, /* HP lt2523 (Novatel E371) */
{ } /* Terminating entry */
};
MODULE_DEVICE_TABLE(usb, option_ids);
diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index 46fca6b75846..1db4b61bdf7b 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -49,6 +49,7 @@ static const struct usb_device_id id_table[] = {
{ USB_DEVICE(IODATA_VENDOR_ID, IODATA_PRODUCT_ID) },
{ USB_DEVICE(IODATA_VENDOR_ID, IODATA_PRODUCT_ID_RSAQ5) },
{ USB_DEVICE(ATEN_VENDOR_ID, ATEN_PRODUCT_ID) },
+ { USB_DEVICE(ATEN_VENDOR_ID, ATEN_PRODUCT_ID2) },
{ USB_DEVICE(ATEN_VENDOR_ID2, ATEN_PRODUCT_ID) },
{ USB_DEVICE(ELCOM_VENDOR_ID, ELCOM_PRODUCT_ID) },
{ USB_DEVICE(ELCOM_VENDOR_ID, ELCOM_PRODUCT_ID_UCSGT) },
diff --git a/drivers/usb/serial/pl2303.h b/drivers/usb/serial/pl2303.h
index e3b7af8adfb7..09d9be88209e 100644
--- a/drivers/usb/serial/pl2303.h
+++ b/drivers/usb/serial/pl2303.h
@@ -27,6 +27,7 @@
#define ATEN_VENDOR_ID 0x0557
#define ATEN_VENDOR_ID2 0x0547
#define ATEN_PRODUCT_ID 0x2008
+#define ATEN_PRODUCT_ID2 0x2118
#define IODATA_VENDOR_ID 0x04bb
#define IODATA_PRODUCT_ID 0x0a03
diff --git a/drivers/usb/serial/qcserial.c b/drivers/usb/serial/qcserial.c
index 1bc6089b9008..696458db7e3c 100644
--- a/drivers/usb/serial/qcserial.c
+++ b/drivers/usb/serial/qcserial.c
@@ -124,6 +124,7 @@ static const struct usb_device_id id_table[] = {
{USB_DEVICE(0x1410, 0xa021)}, /* Novatel Gobi 3000 Composite */
{USB_DEVICE(0x413c, 0x8193)}, /* Dell Gobi 3000 QDL */
{USB_DEVICE(0x413c, 0x8194)}, /* Dell Gobi 3000 Composite */
+ {USB_DEVICE(0x413c, 0x81a6)}, /* Dell DW5570 QDL (MC8805) */
{USB_DEVICE(0x1199, 0x68a4)}, /* Sierra Wireless QDL */
{USB_DEVICE(0x1199, 0x68a5)}, /* Sierra Wireless Modem */
{USB_DEVICE(0x1199, 0x68a8)}, /* Sierra Wireless QDL */