1 files changed, 124 insertions, 108 deletions

diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c
index 7e998081e1cd..d953d674f222 100644
--- a/drivers/usb/serial/mos7840.c
+++ b/drivers/usb/serial/mos7840.c
@@ -183,7 +183,10 @@
 #define LED_ON_MS	500
 #define LED_OFF_MS	500
 
-static int device_type;
+enum mos7840_flag {
+	MOS7840_FLAG_CTRL_BUSY,
+	MOS7840_FLAG_LED_BUSY,
+};
 
 static const struct usb_device_id id_table[] = {
 	{USB_DEVICE(USB_VENDOR_ID_MOSCHIP, MOSCHIP_DEVICE_ID_7840)},
@@ -238,9 +241,12 @@ struct moschip_port {
 
 	/* For device(s) with LED indicator */
 	bool has_led;
-	bool led_flag;
 	struct timer_list led_timer1;	/* Timer for LED on */
 	struct timer_list led_timer2;	/* Timer for LED off */
+	struct urb *led_urb;
+	struct usb_ctrlrequest *led_dr;
+
+	unsigned long flags;
 };
 
 /*
@@ -303,15 +309,12 @@ static int mos7840_set_uart_reg(struct usb_serial_port *port, __u16 reg,
 	/* For the UART control registers, the application number need
 	   to be Or'ed */
 	if (port->serial->num_ports == 4) {
-		val |= (((__u16) port->number -
-				(__u16) (port->serial->minor)) + 1) << 8;
+		val |= ((__u16)port->port_number + 1) << 8;
 	} else {
-		if (((__u16) port->number - (__u16) (port->serial->minor)) == 0) {
-			val |= (((__u16) port->number -
-			      (__u16) (port->serial->minor)) + 1) << 8;
+		if (port->port_number == 0) {
+			val |= ((__u16)port->port_number + 1) << 8;
 		} else {
-			val |= (((__u16) port->number -
-			      (__u16) (port->serial->minor)) + 2) << 8;
+			val |= ((__u16)port->port_number + 2) << 8;
 		}
 	}
 	dev_dbg(&port->dev, "%s application number is %x\n", __func__, val);
@@ -340,16 +343,12 @@ static int mos7840_get_uart_reg(struct usb_serial_port *port, __u16 reg,
 
 	/* Wval  is same as application number */
 	if (port->serial->num_ports == 4) {
-		Wval =
-		    (((__u16) port->number - (__u16) (port->serial->minor)) +
-		     1) << 8;
+		Wval = ((__u16)port->port_number + 1) << 8;
 	} else {
-		if (((__u16) port->number - (__u16) (port->serial->minor)) == 0) {
-			Wval = (((__u16) port->number -
-			      (__u16) (port->serial->minor)) + 1) << 8;
+		if (port->port_number == 0) {
+			Wval = ((__u16)port->port_number + 1) << 8;
 		} else {
-			Wval = (((__u16) port->number -
-			      (__u16) (port->serial->minor)) + 2) << 8;
+			Wval = ((__u16)port->port_number + 2) << 8;
 		}
 	}
 	dev_dbg(&port->dev, "%s application number is %x\n", __func__, Wval);
@@ -467,10 +466,10 @@ static void mos7840_control_callback(struct urb *urb)
 	case -ESHUTDOWN:
 		/* this urb is terminated, clean up */
 		dev_dbg(dev, "%s - urb shutting down with status: %d\n", __func__, status);
-		return;
+		goto out;
 	default:
 		dev_dbg(dev, "%s - nonzero urb status received: %d\n", __func__, status);
-		return;
+		goto out;
 	}
 
 	dev_dbg(dev, "%s urb buffer size is %d\n", __func__, urb->actual_length);
@@ -483,6 +482,8 @@ static void mos7840_control_callback(struct urb *urb)
 		mos7840_handle_new_msr(mos7840_port, regval);
 	else if (mos7840_port->MsrLsr == 1)
 		mos7840_handle_new_lsr(mos7840_port, regval);
+out:
+	clear_bit_unlock(MOS7840_FLAG_CTRL_BUSY, &mos7840_port->flags);
 }
 
 static int mos7840_get_reg(struct moschip_port *mcs, __u16 Wval, __u16 reg,
@@ -493,6 +494,9 @@ static int mos7840_get_reg(struct moschip_port *mcs, __u16 Wval, __u16 reg,
 	unsigned char *buffer = mcs->ctrl_buf;
 	int ret;
 
+	if (test_and_set_bit_lock(MOS7840_FLAG_CTRL_BUSY, &mcs->flags))
+		return -EBUSY;
+
 	dr->bRequestType = MCS_RD_RTYPE;
 	dr->bRequest = MCS_RDREQ;
 	dr->wValue = cpu_to_le16(Wval);	/* 0 */
@@ -504,6 +508,9 @@ static int mos7840_get_reg(struct moschip_port *mcs, __u16 Wval, __u16 reg,
 			     mos7840_control_callback, mcs);
 	mcs->control_urb->transfer_buffer_length = 2;
 	ret = usb_submit_urb(mcs->control_urb, GFP_ATOMIC);
+	if (ret)
+		clear_bit_unlock(MOS7840_FLAG_CTRL_BUSY, &mcs->flags);
+
 	return ret;
 }
 
@@ -530,7 +537,7 @@ static void mos7840_set_led_async(struct moschip_port *mcs, __u16 wval,
 				__u16 reg)
 {
 	struct usb_device *dev = mcs->port->serial->dev;
-	struct usb_ctrlrequest *dr = mcs->dr;
+	struct usb_ctrlrequest *dr = mcs->led_dr;
 
 	dr->bRequestType = MCS_WR_RTYPE;
 	dr->bRequest = MCS_WRREQ;
@@ -538,10 +545,10 @@ static void mos7840_set_led_async(struct moschip_port *mcs, __u16 wval,
 	dr->wIndex = cpu_to_le16(reg);
 	dr->wLength = cpu_to_le16(0);
 
-	usb_fill_control_urb(mcs->control_urb, dev, usb_sndctrlpipe(dev, 0),
+	usb_fill_control_urb(mcs->led_urb, dev, usb_sndctrlpipe(dev, 0),
 		(unsigned char *)dr, NULL, 0, mos7840_set_led_callback, NULL);
 
-	usb_submit_urb(mcs->control_urb, GFP_ATOMIC);
+	usb_submit_urb(mcs->led_urb, GFP_ATOMIC);
 }
 
 static void mos7840_set_led_sync(struct usb_serial_port *port, __u16 reg,
@@ -567,7 +574,19 @@ static void mos7840_led_flag_off(unsigned long arg)
 {
 	struct moschip_port *mcs = (struct moschip_port *) arg;
 
-	mcs->led_flag = false;
+	clear_bit_unlock(MOS7840_FLAG_LED_BUSY, &mcs->flags);
+}
+
+static void mos7840_led_activity(struct usb_serial_port *port)
+{
+	struct moschip_port *mos7840_port = usb_get_serial_port_data(port);
+
+	if (test_and_set_bit_lock(MOS7840_FLAG_LED_BUSY, &mos7840_port->flags))
+		return;
+
+	mos7840_set_led_async(mos7840_port, 0x0301, MODEM_CONTROL_REGISTER);
+	mod_timer(&mos7840_port->led_timer1,
+				jiffies + msecs_to_jiffies(LED_ON_MS));
 }
 
 /*****************************************************************************
@@ -631,9 +650,7 @@ static void mos7840_interrupt_callback(struct urb *urb)
 
 	for (i = 0; i < serial->num_ports; i++) {
 		mos7840_port = mos7840_get_port_private(serial->port[i]);
-		wval =
-		    (((__u16) serial->port[i]->number -
-		      (__u16) (serial->minor)) + 1) << 8;
+		wval = ((__u16)serial->port[i]->port_number + 1) << 8;
 		if (mos7840_port->open) {
 			if (sp[i] & 0x01) {
 				dev_dbg(&urb->dev->dev, "SP%d No Interrupt !!!\n", i);
@@ -767,14 +784,8 @@ static void mos7840_bulk_in_callback(struct urb *urb)
 		return;
 	}
 
-	/* Turn on LED */
-	if (mos7840_port->has_led && !mos7840_port->led_flag) {
-		mos7840_port->led_flag = true;
-		mos7840_set_led_async(mos7840_port, 0x0301,
-					MODEM_CONTROL_REGISTER);
-		mod_timer(&mos7840_port->led_timer1,
-				jiffies + msecs_to_jiffies(LED_ON_MS));
-	}
+	if (mos7840_port->has_led)
+		mos7840_led_activity(port);
 
 	mos7840_port->read_urb_busy = true;
 	retval = usb_submit_urb(mos7840_port->read_urb, GFP_ATOMIC);
@@ -825,18 +836,6 @@ static void mos7840_bulk_out_data_callback(struct urb *urb)
 /************************************************************************/
 /*       D R I V E R  T T Y  I N T E R F A C E  F U N C T I O N S       */
 /************************************************************************/
-#ifdef MCSSerialProbe
-static int mos7840_serial_probe(struct usb_serial *serial,
-				const struct usb_device_id *id)
-{
-
-	/*need to implement the mode_reg reading and updating\
-	   structures usb_serial_ device_type\
-	   (i.e num_ports, num_bulkin,bulkout etc) */
-	/* Also we can update the changes  attach */
-	return 1;
-}
-#endif
 
 /*****************************************************************************
  * mos7840_open
@@ -914,20 +913,20 @@ static int mos7840_open(struct tty_struct *tty, struct usb_serial_port *port)
 	status = mos7840_get_reg_sync(port, mos7840_port->SpRegOffset, &Data);
 	if (status < 0) {
 		dev_dbg(&port->dev, "Reading Spreg failed\n");
-		return -1;
+		goto err;
 	}
 	Data |= 0x80;
 	status = mos7840_set_reg_sync(port, mos7840_port->SpRegOffset, Data);
 	if (status < 0) {
 		dev_dbg(&port->dev, "writing Spreg failed\n");
-		return -1;
+		goto err;
 	}
 
 	Data &= ~0x80;
 	status = mos7840_set_reg_sync(port, mos7840_port->SpRegOffset, Data);
 	if (status < 0) {
 		dev_dbg(&port->dev, "writing Spreg failed\n");
-		return -1;
+		goto err;
 	}
 	/* End of block to be checked */
 
@@ -936,7 +935,7 @@ static int mos7840_open(struct tty_struct *tty, struct usb_serial_port *port)
 									&Data);
 	if (status < 0) {
 		dev_dbg(&port->dev, "Reading Controlreg failed\n");
-		return -1;
+		goto err;
 	}
 	Data |= 0x08;		/* Driver done bit */
 	Data |= 0x20;		/* rx_disable */
@@ -944,7 +943,7 @@ static int mos7840_open(struct tty_struct *tty, struct usb_serial_port *port)
 				mos7840_port->ControlRegOffset, Data);
 	if (status < 0) {
 		dev_dbg(&port->dev, "writing Controlreg failed\n");
-		return -1;
+		goto err;
 	}
 	/* do register settings here */
 	/* Set all regs to the device default values. */
@@ -955,21 +954,21 @@ static int mos7840_open(struct tty_struct *tty, struct usb_serial_port *port)
 	status = mos7840_set_uart_reg(port, INTERRUPT_ENABLE_REGISTER, Data);
 	if (status < 0) {
 		dev_dbg(&port->dev, "disabling interrupts failed\n");
-		return -1;
+		goto err;
 	}
 	/* Set FIFO_CONTROL_REGISTER to the default value */
 	Data = 0x00;
 	status = mos7840_set_uart_reg(port, FIFO_CONTROL_REGISTER, Data);
 	if (status < 0) {
 		dev_dbg(&port->dev, "Writing FIFO_CONTROL_REGISTER  failed\n");
-		return -1;
+		goto err;
 	}
 
 	Data = 0xcf;
 	status = mos7840_set_uart_reg(port, FIFO_CONTROL_REGISTER, Data);
 	if (status < 0) {
 		dev_dbg(&port->dev, "Writing FIFO_CONTROL_REGISTER  failed\n");
-		return -1;
+		goto err;
 	}
 
 	Data = 0x03;
@@ -1065,8 +1064,8 @@ static int mos7840_open(struct tty_struct *tty, struct usb_serial_port *port)
 	 * (can't set it up in mos7840_startup as the  *
 	 * structures were not set up at that time.)   */
 
-	dev_dbg(&port->dev, "port number is %d\n", port->number);
-	dev_dbg(&port->dev, "serial number is %d\n", port->serial->minor);
+	dev_dbg(&port->dev, "port number is %d\n", port->port_number);
+	dev_dbg(&port->dev, "minor number is %d\n", port->minor);
 	dev_dbg(&port->dev, "Bulkin endpoint is %d\n", port->bulk_in_endpointAddress);
 	dev_dbg(&port->dev, "BulkOut endpoint is %d\n", port->bulk_out_endpointAddress);
 	dev_dbg(&port->dev, "Interrupt endpoint is %d\n", port->interrupt_in_endpointAddress);
@@ -1074,9 +1073,7 @@ static int mos7840_open(struct tty_struct *tty, struct usb_serial_port *port)
 	mos7840_port->read_urb = port->read_urb;
 
 	/* set up our bulk in urb */
-	if ((serial->num_ports == 2)
-		&& ((((__u16)port->number -
-			(__u16)(port->serial->minor)) % 2) != 0)) {
+	if ((serial->num_ports == 2) && (((__u16)port->port_number % 2) != 0)) {
 		usb_fill_bulk_urb(mos7840_port->read_urb,
 			serial->dev,
 			usb_rcvbulkpipe(serial->dev,
@@ -1114,6 +1111,15 @@ static int mos7840_open(struct tty_struct *tty, struct usb_serial_port *port)
 	/* mos7840_change_port_settings(mos7840_port,old_termios); */
 
 	return 0;
+err:
+	for (j = 0; j < NUM_URBS; ++j) {
+		urb = mos7840_port->write_urb_pool[j];
+		if (!urb)
+			continue;
+		kfree(urb->transfer_buffer);
+		usb_free_urb(urb);
+	}
+	return status;
 }
 
 /*****************************************************************************
@@ -1199,7 +1205,7 @@ static void mos7840_close(struct usb_serial_port *port)
 	mos7840_port->read_urb_busy = false;
 
 	port0->open_ports--;
-	dev_dbg(&port->dev, "%s in close%d:in port%d\n", __func__, port0->open_ports, port->number);
+	dev_dbg(&port->dev, "%s in close%d\n", __func__, port0->open_ports);
 	if (port0->open_ports == 0) {
 		if (serial->port[0]->interrupt_in_urb) {
 			dev_dbg(&port->dev, "Shutdown interrupt_in_urb\n");
@@ -1435,9 +1441,7 @@ static int mos7840_write(struct tty_struct *tty, struct usb_serial_port *port,
 	memcpy(urb->transfer_buffer, current_position, transfer_size);
 
 	/* fill urb with data and submit  */
-	if ((serial->num_ports == 2)
-		&& ((((__u16)port->number -
-			(__u16)(port->serial->minor)) % 2) != 0)) {
+	if ((serial->num_ports == 2) && (((__u16)port->port_number % 2) != 0)) {
 		usb_fill_bulk_urb(urb,
 			serial->dev,
 			usb_sndbulkpipe(serial->dev,
@@ -1458,13 +1462,8 @@ static int mos7840_write(struct tty_struct *tty, struct usb_serial_port *port,
 	data1 = urb->transfer_buffer;
 	dev_dbg(&port->dev, "bulkout endpoint is %d\n", port->bulk_out_endpointAddress);
 
-	/* Turn on LED */
-	if (mos7840_port->has_led && !mos7840_port->led_flag) {
-		mos7840_port->led_flag = true;
-		mos7840_set_led_sync(port, MODEM_CONTROL_REGISTER, 0x0301);
-		mod_timer(&mos7840_port->led_timer1,
-				jiffies + msecs_to_jiffies(LED_ON_MS));
-	}
+	if (mos7840_port->has_led)
+		mos7840_led_activity(port);
 
 	/* send it down the pipe */
 	status = usb_submit_urb(urb, GFP_ATOMIC);
@@ -1732,10 +1731,9 @@ static int mos7840_send_cmd_write_baud_rate(struct moschip_port *mos7840_port,
 	if (mos7840_serial_paranoia_check(port->serial, __func__))
 		return -1;
 
-	number = mos7840_port->port->number - mos7840_port->port->serial->minor;
+	number = mos7840_port->port->port_number;
 
-	dev_dbg(&port->dev, "%s - port = %d, baud = %d\n", __func__,
-		mos7840_port->port->number, baudRate);
+	dev_dbg(&port->dev, "%s - baud = %d\n", __func__, baudRate);
 	/* reset clk_uart_sel in spregOffset */
 	if (baudRate > 115200) {
 #ifdef HW_flow_control
@@ -2016,7 +2014,6 @@ static void mos7840_set_termios(struct tty_struct *tty,
 		tty->termios.c_cflag, RELEVANT_IFLAG(tty->termios.c_iflag));
 	dev_dbg(&port->dev, "%s - old clfag %08x old iflag %08x\n", __func__,
 		old_termios->c_cflag, RELEVANT_IFLAG(old_termios->c_iflag));
-	dev_dbg(&port->dev, "%s - port %d\n", __func__, port->number);
 
 	/* change the port settings to the new ones specified */
 
@@ -2083,8 +2080,8 @@ static int mos7840_get_serial_info(struct moschip_port *mos7840_port,
 	memset(&tmp, 0, sizeof(tmp));
 
 	tmp.type = PORT_16550A;
-	tmp.line = mos7840_port->port->serial->minor;
-	tmp.port = mos7840_port->port->number;
+	tmp.line = mos7840_port->port->minor;
+	tmp.port = mos7840_port->port->port_number;
 	tmp.irq = 0;
 	tmp.flags = ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ;
 	tmp.xmit_fifo_size = NUM_URBS * URB_TRANSFER_BUFFER_SIZE;
@@ -2193,38 +2190,48 @@ static int mos7810_check(struct usb_serial *serial)
 	return 0;
 }
 
-static int mos7840_calc_num_ports(struct usb_serial *serial)
+static int mos7840_probe(struct usb_serial *serial,
+				const struct usb_device_id *id)
 {
-	__u16 data = 0x00;
+	u16 product = serial->dev->descriptor.idProduct;
 	u8 *buf;
-	int mos7840_num_ports;
+	int device_type;
+
+	if (product == MOSCHIP_DEVICE_ID_7810 ||
+		product == MOSCHIP_DEVICE_ID_7820) {
+		device_type = product;
+		goto out;
+	}
 
 	buf = kzalloc(VENDOR_READ_LENGTH, GFP_KERNEL);
-	if (buf) {
-		usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
+	if (!buf)
+		return -ENOMEM;
+
+	usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
 			MCS_RDREQ, MCS_RD_RTYPE, 0, GPIO_REGISTER, buf,
 			VENDOR_READ_LENGTH, MOS_WDR_TIMEOUT);
-		data = *buf;
-		kfree(buf);
-	}
 
-	if (serial->dev->descriptor.idProduct == MOSCHIP_DEVICE_ID_7810 ||
-		serial->dev->descriptor.idProduct == MOSCHIP_DEVICE_ID_7820) {
-		device_type = serial->dev->descriptor.idProduct;
-	} else {
-		/* For a MCS7840 device GPIO0 must be set to 1 */
-		if ((data & 0x01) == 1)
-			device_type = MOSCHIP_DEVICE_ID_7840;
-		else if (mos7810_check(serial))
-			device_type = MOSCHIP_DEVICE_ID_7810;
-		else
-			device_type = MOSCHIP_DEVICE_ID_7820;
-	}
+	/* For a MCS7840 device GPIO0 must be set to 1 */
+	if (buf[0] & 0x01)
+		device_type = MOSCHIP_DEVICE_ID_7840;
+	else if (mos7810_check(serial))
+		device_type = MOSCHIP_DEVICE_ID_7810;
+	else
+		device_type = MOSCHIP_DEVICE_ID_7820;
+
+	kfree(buf);
+out:
+	usb_set_serial_data(serial, (void *)(unsigned long)device_type);
+
+	return 0;
+}
+
+static int mos7840_calc_num_ports(struct usb_serial *serial)
+{
+	int device_type = (unsigned long)usb_get_serial_data(serial);
+	int mos7840_num_ports;
 
 	mos7840_num_ports = (device_type >> 4) & 0x000F;
-	serial->num_bulk_in = mos7840_num_ports;
-	serial->num_bulk_out = mos7840_num_ports;
-	serial->num_ports = mos7840_num_ports;
 
 	return mos7840_num_ports;
 }
@@ -2232,6 +2239,7 @@ static int mos7840_calc_num_ports(struct usb_serial *serial)
 static int mos7840_port_probe(struct usb_serial_port *port)
 {
 	struct usb_serial *serial = port->serial;
+	int device_type = (unsigned long)usb_get_serial_data(serial);
 	struct moschip_port *mos7840_port;
 	int status;
 	int pnum;
@@ -2240,7 +2248,7 @@ static int mos7840_port_probe(struct usb_serial_port *port)
 	/* we set up the pointers to the endpoints in the mos7840_open *
 	 * function, as the structures aren't created yet.             */
 
-	pnum = port->number - serial->minor;
+	pnum = port->port_number;
 
 	dev_dbg(&port->dev, "mos7840_startup: configuring port %d\n", pnum);
 	mos7840_port = kzalloc(sizeof(struct moschip_port), GFP_KERNEL);
@@ -2261,10 +2269,8 @@ static int mos7840_port_probe(struct usb_serial_port *port)
 	 * usb-serial.c:get_free_serial() and cannot therefore be used
 	 * to index device instances */
 	mos7840_port->port_num = pnum + 1;
-	dev_dbg(&port->dev, "port->number = %d\n", port->number);
-	dev_dbg(&port->dev, "port->serial->minor = %d\n", port->serial->minor);
+	dev_dbg(&port->dev, "port->minor = %d\n", port->minor);
 	dev_dbg(&port->dev, "mos7840_port->port_num = %d\n", mos7840_port->port_num);
-	dev_dbg(&port->dev, "serial->minor = %d\n", serial->minor);
 
 	if (mos7840_port->port_num == 1) {
 		mos7840_port->SpRegOffset = 0x0;
@@ -2409,6 +2415,14 @@ static int mos7840_port_probe(struct usb_serial_port *port)
 	if (device_type == MOSCHIP_DEVICE_ID_7810) {
 		mos7840_port->has_led = true;
 
+		mos7840_port->led_urb = usb_alloc_urb(0, GFP_KERNEL);
+		mos7840_port->led_dr = kmalloc(sizeof(*mos7840_port->led_dr),
+								GFP_KERNEL);
+		if (!mos7840_port->led_urb || !mos7840_port->led_dr) {
+			status = -ENOMEM;
+			goto error;
+		}
+
 		init_timer(&mos7840_port->led_timer1);
 		mos7840_port->led_timer1.function = mos7840_led_off;
 		mos7840_port->led_timer1.expires =
@@ -2421,8 +2435,6 @@ static int mos7840_port_probe(struct usb_serial_port *port)
 			jiffies + msecs_to_jiffies(LED_OFF_MS);
 		mos7840_port->led_timer2.data = (unsigned long)mos7840_port;
 
-		mos7840_port->led_flag = false;
-
 		/* Turn off LED */
 		mos7840_set_led_sync(port, MODEM_CONTROL_REGISTER, 0x0300);
 	}
@@ -2444,6 +2456,8 @@ out:
 	}
 	return 0;
 error:
+	kfree(mos7840_port->led_dr);
+	usb_free_urb(mos7840_port->led_urb);
 	kfree(mos7840_port->dr);
 	kfree(mos7840_port->ctrl_buf);
 	usb_free_urb(mos7840_port->control_urb);
@@ -2464,6 +2478,10 @@ static int mos7840_port_remove(struct usb_serial_port *port)
 
 		del_timer_sync(&mos7840_port->led_timer1);
 		del_timer_sync(&mos7840_port->led_timer2);
+
+		usb_kill_urb(mos7840_port->led_urb);
+		usb_free_urb(mos7840_port->led_urb);
+		kfree(mos7840_port->led_dr);
 	}
 	usb_kill_urb(mos7840_port->control_urb);
 	usb_free_urb(mos7840_port->control_urb);
@@ -2490,9 +2508,7 @@ static struct usb_serial_driver moschip7840_4port_device = {
 	.throttle = mos7840_throttle,
 	.unthrottle = mos7840_unthrottle,
 	.calc_num_ports = mos7840_calc_num_ports,
-#ifdef MCSSerialProbe
-	.probe = mos7840_serial_probe,
-#endif
+	.probe = mos7840_probe,
 	.ioctl = mos7840_ioctl,
 	.set_termios = mos7840_set_termios,
 	.break_ctl = mos7840_break,