summaryrefslogtreecommitdiff
path: root/drivers/usb/net/pegasus.h
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/net/pegasus.h')
-rw-r--r--drivers/usb/net/pegasus.h298
1 files changed, 298 insertions, 0 deletions
diff --git a/drivers/usb/net/pegasus.h b/drivers/usb/net/pegasus.h
new file mode 100644
index 000000000000..13ccedef5c7e
--- /dev/null
+++ b/drivers/usb/net/pegasus.h
@@ -0,0 +1,298 @@
+/*
+ * Copyright (c) 1999-2003 Petko Manolov - Petkan (petkan@users.sourceforge.net)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+
+#ifndef PEGASUS_DEV
+
+#define PEGASUS_II 0x80000000
+#define HAS_HOME_PNA 0x40000000
+
+#define PEGASUS_MTU 1536
+#define RX_SKBS 4
+
+#define EPROM_WRITE 0x01
+#define EPROM_READ 0x02
+#define EPROM_DONE 0x04
+#define EPROM_WR_ENABLE 0x10
+#define EPROM_LOAD 0x20
+
+#define PHY_DONE 0x80
+#define PHY_READ 0x40
+#define PHY_WRITE 0x20
+#define DEFAULT_GPIO_RESET 0x24
+#define LINKSYS_GPIO_RESET 0x24
+#define DEFAULT_GPIO_SET 0x26
+
+#define PEGASUS_PRESENT 0x00000001
+#define PEGASUS_TX_BUSY 0x00000004
+#define PEGASUS_RX_BUSY 0x00000008
+#define CTRL_URB_RUNNING 0x00000010
+#define CTRL_URB_SLEEP 0x00000020
+#define PEGASUS_UNPLUG 0x00000040
+#define PEGASUS_RX_URB_FAIL 0x00000080
+#define ETH_REGS_CHANGE 0x40000000
+#define ETH_REGS_CHANGED 0x80000000
+
+#define RX_MULTICAST 2
+#define RX_PROMISCUOUS 4
+
+#define REG_TIMEOUT (HZ)
+#define PEGASUS_TX_TIMEOUT (HZ*10)
+
+#define TX_UNDERRUN 0x80
+#define EXCESSIVE_COL 0x40
+#define LATE_COL 0x20
+#define NO_CARRIER 0x10
+#define LOSS_CARRIER 0x08
+#define JABBER_TIMEOUT 0x04
+
+#define LINK_STATUS 0x01
+
+#define PEGASUS_REQT_READ 0xc0
+#define PEGASUS_REQT_WRITE 0x40
+#define PEGASUS_REQ_GET_REGS 0xf0
+#define PEGASUS_REQ_SET_REGS 0xf1
+#define PEGASUS_REQ_SET_REG PEGASUS_REQ_SET_REGS
+
+enum pegasus_registers {
+ EthCtrl0 = 0,
+ EthCtrl1 = 1,
+ EthCtrl2 = 2,
+ EthID = 0x10,
+ Reg1d = 0x1d,
+ EpromOffset = 0x20,
+ EpromData = 0x21, /* 0x21 low, 0x22 high byte */
+ EpromCtrl = 0x23,
+ PhyAddr = 0x25,
+ PhyData = 0x26, /* 0x26 low, 0x27 high byte */
+ PhyCtrl = 0x28,
+ UsbStst = 0x2a,
+ EthTxStat0 = 0x2b,
+ EthTxStat1 = 0x2c,
+ EthRxStat = 0x2d,
+ WakeupControl = 0x78,
+ Reg7b = 0x7b,
+ Gpio0 = 0x7e,
+ Gpio1 = 0x7f,
+ Reg81 = 0x81,
+};
+
+
+typedef struct pegasus {
+ struct usb_device *usb;
+ struct usb_interface *intf;
+ struct net_device *net;
+ struct net_device_stats stats;
+ struct mii_if_info mii;
+ unsigned flags;
+ unsigned features;
+ u32 msg_enable;
+ u32 wolopts;
+ int dev_index;
+ int intr_interval;
+ struct tasklet_struct rx_tl;
+ struct work_struct carrier_check;
+ struct urb *ctrl_urb, *rx_urb, *tx_urb, *intr_urb;
+ struct sk_buff *rx_pool[RX_SKBS];
+ struct sk_buff *rx_skb;
+ struct usb_ctrlrequest dr;
+ wait_queue_head_t ctrl_wait;
+ spinlock_t rx_pool_lock;
+ int chip;
+ unsigned char intr_buff[8];
+ __u8 tx_buff[PEGASUS_MTU];
+ __u8 eth_regs[4];
+ __u8 phy;
+ __u8 gpio_res;
+} pegasus_t;
+
+
+struct usb_eth_dev {
+ char *name;
+ __u16 vendor;
+ __u16 device;
+ __u32 private; /* LSB is gpio reset value */
+};
+
+#define VENDOR_3COM 0x0506
+#define VENDOR_ABOCOM 0x07b8
+#define VENDOR_ACCTON 0x083a
+#define VENDOR_ADMTEK 0x07a6
+#define VENDOR_AEILAB 0x3334
+#define VENDOR_ALLIEDTEL 0x07c9
+#define VENDOR_ATEN 0x0557
+#define VENDOR_BELKIN 0x050d
+#define VENDOR_BILLIONTON 0x08dd
+#define VENDOR_COMPAQ 0x049f
+#define VENDOR_COREGA 0x07aa
+#define VENDOR_DLINK 0x2001
+#define VENDOR_ELCON 0x0db7
+#define VENDOR_ELSA 0x05cc
+#define VENDOR_GIGABYTE 0x1044
+#define VENDOR_HAWKING 0x0e66
+#define VENDOR_HP 0x03f0
+#define VENDOR_IODATA 0x04bb
+#define VENDOR_KINGSTON 0x0951
+#define VENDOR_LANEED 0x056e
+#define VENDOR_LINKSYS 0x066b
+#define VENDOR_MELCO 0x0411
+#define VENDOR_MICROSOFT 0x045e
+#define VENDOR_MOBILITY 0x1342
+#define VENDOR_NETGEAR 0x0846
+#define VENDOR_OCT 0x0b39
+#define VENDOR_SMARTBRIDGES 0x08d1
+#define VENDOR_SMC 0x0707
+#define VENDOR_SOHOWARE 0x15e8
+#define VENDOR_SIEMENS 0x067c
+
+
+#else /* PEGASUS_DEV */
+
+PEGASUS_DEV( "3Com USB Ethernet 3C460B", VENDOR_3COM, 0x4601,
+ DEFAULT_GPIO_RESET | PEGASUS_II )
+PEGASUS_DEV( "ATEN USB Ethernet UC-110T", VENDOR_ATEN, 0x2007,
+ DEFAULT_GPIO_RESET | PEGASUS_II )
+PEGASUS_DEV( "USB HPNA/Ethernet", VENDOR_ABOCOM, 0x110c,
+ DEFAULT_GPIO_RESET | PEGASUS_II | HAS_HOME_PNA )
+PEGASUS_DEV( "USB HPNA/Ethernet", VENDOR_ABOCOM, 0x4104,
+ DEFAULT_GPIO_RESET | HAS_HOME_PNA )
+PEGASUS_DEV( "USB HPNA/Ethernet", VENDOR_ABOCOM, 0x4004,
+ DEFAULT_GPIO_RESET | HAS_HOME_PNA )
+PEGASUS_DEV( "USB HPNA/Ethernet", VENDOR_ABOCOM, 0x4007,
+ DEFAULT_GPIO_RESET | HAS_HOME_PNA )
+PEGASUS_DEV( "USB 10/100 Fast Ethernet", VENDOR_ABOCOM, 0x4102,
+ DEFAULT_GPIO_RESET | PEGASUS_II )
+PEGASUS_DEV( "USB 10/100 Fast Ethernet", VENDOR_ABOCOM, 0x4002,
+ DEFAULT_GPIO_RESET )
+PEGASUS_DEV( "USB 10/100 Fast Ethernet", VENDOR_ABOCOM, 0x400b,
+ DEFAULT_GPIO_RESET | PEGASUS_II )
+PEGASUS_DEV( "USB 10/100 Fast Ethernet", VENDOR_ABOCOM, 0x400c,
+ DEFAULT_GPIO_RESET | PEGASUS_II )
+PEGASUS_DEV( "USB 10/100 Fast Ethernet", VENDOR_ABOCOM, 0xabc1,
+ DEFAULT_GPIO_RESET )
+PEGASUS_DEV( "USB 10/100 Fast Ethernet", VENDOR_ABOCOM, 0x200c,
+ DEFAULT_GPIO_RESET | PEGASUS_II )
+PEGASUS_DEV( "Accton USB 10/100 Ethernet Adapter", VENDOR_ACCTON, 0x1046,
+ DEFAULT_GPIO_RESET )
+PEGASUS_DEV( "SpeedStream USB 10/100 Ethernet", VENDOR_ACCTON, 0x5046,
+ DEFAULT_GPIO_RESET | PEGASUS_II )
+PEGASUS_DEV( "ADMtek ADM8511 \"Pegasus II\" USB Ethernet",
+ VENDOR_ADMTEK, 0x8511,
+ DEFAULT_GPIO_RESET | PEGASUS_II | HAS_HOME_PNA )
+PEGASUS_DEV( "ADMtek ADM8513 \"Pegasus II\" USB Ethernet",
+ VENDOR_ADMTEK, 0x8513,
+ DEFAULT_GPIO_RESET | PEGASUS_II )
+PEGASUS_DEV( "ADMtek ADM8515 \"Pegasus II\" USB-2.0 Ethernet",
+ VENDOR_ADMTEK, 0x8515,
+ DEFAULT_GPIO_RESET | PEGASUS_II )
+PEGASUS_DEV( "ADMtek AN986 \"Pegasus\" USB Ethernet (evaluation board)",
+ VENDOR_ADMTEK, 0x0986,
+ DEFAULT_GPIO_RESET | HAS_HOME_PNA )
+PEGASUS_DEV( "AN986A USB MAC", VENDOR_ADMTEK, 1986,
+ DEFAULT_GPIO_RESET | PEGASUS_II )
+PEGASUS_DEV( "AEI USB Fast Ethernet Adapter", VENDOR_AEILAB, 0x1701,
+ DEFAULT_GPIO_RESET | PEGASUS_II )
+PEGASUS_DEV( "Allied Telesyn Int. AT-USB100", VENDOR_ALLIEDTEL, 0xb100,
+ DEFAULT_GPIO_RESET | PEGASUS_II )
+PEGASUS_DEV( "Belkin F5D5050 USB Ethernet", VENDOR_BELKIN, 0x0121,
+ DEFAULT_GPIO_RESET | PEGASUS_II )
+PEGASUS_DEV( "Billionton USB-100", VENDOR_BILLIONTON, 0x0986,
+ DEFAULT_GPIO_RESET )
+PEGASUS_DEV( "Billionton USBLP-100", VENDOR_BILLIONTON, 0x0987,
+ DEFAULT_GPIO_RESET | HAS_HOME_PNA )
+PEGASUS_DEV( "iPAQ Networking 10/100 USB", VENDOR_COMPAQ, 0x8511,
+ DEFAULT_GPIO_RESET | PEGASUS_II )
+PEGASUS_DEV( "Billionton USBEL-100", VENDOR_BILLIONTON, 0x0988,
+ DEFAULT_GPIO_RESET )
+PEGASUS_DEV( "Billionton USBE-100", VENDOR_BILLIONTON, 0x8511,
+ DEFAULT_GPIO_RESET | PEGASUS_II )
+PEGASUS_DEV( "Corega FEter USB-TX", VENDOR_COREGA, 0x0004,
+ DEFAULT_GPIO_RESET )
+PEGASUS_DEV( "Corega FEter USB-TXS", VENDOR_COREGA, 0x000d,
+ DEFAULT_GPIO_RESET | PEGASUS_II )
+PEGASUS_DEV( "D-Link DSB-650TX", VENDOR_DLINK, 0x4001,
+ LINKSYS_GPIO_RESET )
+PEGASUS_DEV( "D-Link DSB-650TX", VENDOR_DLINK, 0x4002,
+ LINKSYS_GPIO_RESET )
+PEGASUS_DEV( "D-Link DSB-650TX", VENDOR_DLINK, 0x4102,
+ LINKSYS_GPIO_RESET | PEGASUS_II )
+PEGASUS_DEV( "D-Link DSB-650TX", VENDOR_DLINK, 0x400b,
+ LINKSYS_GPIO_RESET | PEGASUS_II )
+PEGASUS_DEV( "D-Link DSB-650TX", VENDOR_DLINK, 0x200c,
+ LINKSYS_GPIO_RESET | PEGASUS_II )
+PEGASUS_DEV( "D-Link DSB-650TX(PNA)", VENDOR_DLINK, 0x4003,
+ DEFAULT_GPIO_RESET | HAS_HOME_PNA )
+PEGASUS_DEV( "D-Link DSB-650", VENDOR_DLINK, 0xabc1,
+ DEFAULT_GPIO_RESET )
+PEGASUS_DEV( "GOLDPFEIL USB Adapter", VENDOR_ELCON, 0x0002,
+ DEFAULT_GPIO_RESET | PEGASUS_II | HAS_HOME_PNA )
+PEGASUS_DEV( "EasiDock Ethernet", VENDOR_MOBILITY, 0x0304,
+ DEFAULT_GPIO_RESET )
+PEGASUS_DEV( "Elsa Micolink USB2Ethernet", VENDOR_ELSA, 0x3000,
+ DEFAULT_GPIO_RESET )
+PEGASUS_DEV( "GIGABYTE GN-BR402W Wireless Router", VENDOR_GIGABYTE, 0x8002,
+ DEFAULT_GPIO_RESET )
+PEGASUS_DEV( "Hawking UF100 10/100 Ethernet", VENDOR_HAWKING, 0x400c,
+ DEFAULT_GPIO_RESET | PEGASUS_II )
+PEGASUS_DEV( "HP hn210c Ethernet USB", VENDOR_HP, 0x811c,
+ DEFAULT_GPIO_RESET | PEGASUS_II )
+PEGASUS_DEV( "IO DATA USB ET/TX", VENDOR_IODATA, 0x0904,
+ DEFAULT_GPIO_RESET )
+PEGASUS_DEV( "IO DATA USB ET/TX-S", VENDOR_IODATA, 0x0913,
+ DEFAULT_GPIO_RESET | PEGASUS_II )
+PEGASUS_DEV( "Kingston KNU101TX Ethernet", VENDOR_KINGSTON, 0x000a,
+ DEFAULT_GPIO_RESET)
+PEGASUS_DEV( "LANEED USB Ethernet LD-USB/TX", VENDOR_LANEED, 0x4002,
+ DEFAULT_GPIO_RESET )
+PEGASUS_DEV( "LANEED USB Ethernet LD-USB/TX", VENDOR_LANEED, 0x400b,
+ DEFAULT_GPIO_RESET | PEGASUS_II )
+PEGASUS_DEV( "LANEED USB Ethernet LD-USB/T", VENDOR_LANEED, 0xabc1,
+ DEFAULT_GPIO_RESET )
+PEGASUS_DEV( "LANEED USB Ethernet LD-USB/TX", VENDOR_LANEED, 0x200c,
+ DEFAULT_GPIO_RESET | PEGASUS_II )
+PEGASUS_DEV( "Linksys USB10TX", VENDOR_LINKSYS, 0x2202,
+ LINKSYS_GPIO_RESET )
+PEGASUS_DEV( "Linksys USB100TX", VENDOR_LINKSYS, 0x2203,
+ LINKSYS_GPIO_RESET )
+PEGASUS_DEV( "Linksys USB100TX", VENDOR_LINKSYS, 0x2204,
+ LINKSYS_GPIO_RESET | HAS_HOME_PNA )
+PEGASUS_DEV( "Linksys USB10T Ethernet Adapter", VENDOR_LINKSYS, 0x2206,
+ LINKSYS_GPIO_RESET | PEGASUS_II)
+PEGASUS_DEV( "Linksys USB USB100TX", VENDOR_LINKSYS, 0x400b,
+ LINKSYS_GPIO_RESET | PEGASUS_II )
+PEGASUS_DEV( "Linksys USB10TX", VENDOR_LINKSYS, 0x200c,
+ LINKSYS_GPIO_RESET | PEGASUS_II )
+PEGASUS_DEV( "MELCO/BUFFALO LUA-TX", VENDOR_MELCO, 0x0001,
+ DEFAULT_GPIO_RESET )
+PEGASUS_DEV( "MELCO/BUFFALO LUA-TX", VENDOR_MELCO, 0x0005,
+ DEFAULT_GPIO_RESET )
+PEGASUS_DEV( "MELCO/BUFFALO LUA2-TX", VENDOR_MELCO, 0x0009,
+ DEFAULT_GPIO_RESET | PEGASUS_II )
+PEGASUS_DEV( "Microsoft MN-110", VENDOR_MICROSOFT, 0x007a,
+ DEFAULT_GPIO_RESET | PEGASUS_II )
+PEGASUS_DEV( "NETGEAR FA101", VENDOR_NETGEAR, 0x1020,
+ DEFAULT_GPIO_RESET | PEGASUS_II )
+PEGASUS_DEV( "OCT Inc.", VENDOR_OCT, 0x0109,
+ DEFAULT_GPIO_RESET | PEGASUS_II )
+PEGASUS_DEV( "OCT USB TO Ethernet", VENDOR_OCT, 0x0901,
+ DEFAULT_GPIO_RESET | PEGASUS_II )
+PEGASUS_DEV( "smartNIC 2 PnP Adapter", VENDOR_SMARTBRIDGES, 0x0003,
+ DEFAULT_GPIO_RESET | PEGASUS_II )
+PEGASUS_DEV( "SMC 202 USB Ethernet", VENDOR_SMC, 0x0200,
+ DEFAULT_GPIO_RESET )
+PEGASUS_DEV( "SMC 2206 USB Ethernet", VENDOR_SMC, 0x0201,
+ DEFAULT_GPIO_RESET | PEGASUS_II)
+PEGASUS_DEV( "SOHOware NUB100 Ethernet", VENDOR_SOHOWARE, 0x9100,
+ DEFAULT_GPIO_RESET )
+PEGASUS_DEV( "SOHOware NUB110 Ethernet", VENDOR_SOHOWARE, 0x9110,
+ DEFAULT_GPIO_RESET | PEGASUS_II )
+PEGASUS_DEV( "SpeedStream USB 10/100 Ethernet", VENDOR_SIEMENS, 0x1001,
+ DEFAULT_GPIO_RESET | PEGASUS_II )
+
+
+#endif /* PEGASUS_DEV */