diff options
Diffstat (limited to 'drivers/usb/mtu3/mtu3.h')
| -rw-r--r-- | drivers/usb/mtu3/mtu3.h | 59 |
1 files changed, 38 insertions, 21 deletions
diff --git a/drivers/usb/mtu3/mtu3.h b/drivers/usb/mtu3/mtu3.h index b26fffc58446..3c888d942a9f 100644 --- a/drivers/usb/mtu3/mtu3.h +++ b/drivers/usb/mtu3/mtu3.h @@ -1,19 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0 /* * mtu3.h - MediaTek USB3 DRD header * * Copyright (C) 2016 MediaTek Inc. * * Author: Chunfeng Yun <chunfeng.yun@mediatek.com> - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * */ #ifndef __MTU3_H__ @@ -46,6 +37,9 @@ struct mtu3_request; #define MU3D_EP_RXCR1(epnum) (U3D_RX1CSR1 + (((epnum) - 1) * 0x10)) #define MU3D_EP_RXCR2(epnum) (U3D_RX1CSR2 + (((epnum) - 1) * 0x10)) +#define USB_QMU_TQHIAR(epnum) (U3D_TXQHIAR1 + (((epnum) - 1) * 0x4)) +#define USB_QMU_RQHIAR(epnum) (U3D_RXQHIAR1 + (((epnum) - 1) * 0x4)) + #define USB_QMU_RQCSR(epnum) (U3D_RXQCSR1 + (((epnum) - 1) * 0x10)) #define USB_QMU_RQSAR(epnum) (U3D_RXQSAR1 + (((epnum) - 1) * 0x10)) #define USB_QMU_RQCPR(epnum) (U3D_RXQCPR1 + (((epnum) - 1) * 0x10)) @@ -91,6 +85,7 @@ enum mtu3_speed { MTU3_SPEED_FULL = 1, MTU3_SPEED_HIGH = 3, MTU3_SPEED_SUPER = 4, + MTU3_SPEED_SUPER_PLUS = 5, }; /** @@ -112,6 +107,19 @@ enum mtu3_g_ep0_state { }; /** + * MTU3_DR_FORCE_NONE: automatically switch host and periperal mode + * by IDPIN signal. + * MTU3_DR_FORCE_HOST: force to enter host mode and override OTG + * IDPIN signal. + * MTU3_DR_FORCE_DEVICE: force to enter peripheral mode. + */ +enum mtu3_dr_force_mode { + MTU3_DR_FORCE_NONE = 0, + MTU3_DR_FORCE_HOST, + MTU3_DR_FORCE_DEVICE, +}; + +/** * @base: the base address of fifo * @limit: the bitmap size in bits * @bitmap: fifo bitmap in unit of @MTU3_EP_FIFO_UNIT @@ -138,23 +146,33 @@ struct mtu3_fifo_info { * Checksum value is calculated over the 16 bytes of the GPD by default; * @data_buf_len (RX ONLY): This value indicates the length of * the assigned data buffer + * @tx_ext_addr (TX ONLY): [3:0] are 4 extension bits of @buffer, + * [7:4] are 4 extension bits of @next_gpd * @next_gpd: Physical address of the next GPD * @buffer: Physical address of the data buffer * @buf_len: * (TX): This value indicates the length of the assigned data buffer * (RX): The total length of data received * @ext_len: reserved + * @rx_ext_addr(RX ONLY): [3:0] are 4 extension bits of @buffer, + * [7:4] are 4 extension bits of @next_gpd * @ext_flag: * bit5 (TX ONLY): Zero Length Packet (ZLP), */ struct qmu_gpd { __u8 flag; __u8 chksum; - __le16 data_buf_len; + union { + __le16 data_buf_len; + __le16 tx_ext_addr; + }; __le32 next_gpd; __le32 buffer; __le16 buf_len; - __u8 ext_len; + union { + __u8 ext_len; + __u8 rx_ext_addr; + }; __u8 ext_flag; } __packed; @@ -183,7 +201,6 @@ struct mtu3_gpd_ring { * xHCI driver initialization, it's necessary for system bootup * as device. * @is_u3_drd: whether port0 supports usb3.0 dual-role device or not -* @id_*: used to maually switch between host and device modes by idpin * @manual_drd_enabled: it's true when supports dual-role device by debugfs * to switch host/device modes depending on user input. */ @@ -194,10 +211,6 @@ struct otg_switch_mtk { struct notifier_block id_nb; struct delayed_work extcon_reg_dwork; bool is_u3_drd; - /* dual-role switch by debugfs */ - struct pinctrl *id_pinctrl; - struct pinctrl_state *id_float; - struct pinctrl_state *id_ground; bool manual_drd_enabled; }; @@ -206,14 +219,17 @@ struct otg_switch_mtk { * @ippc_base: register base address of IP Power and Clock interface (IPPC) * @vusb33: usb3.3V shared by device/host IP * @sys_clk: system clock of mtu3, shared by device/host IP + * @ref_clk: reference clock + * @mcu_clk: mcu_bus_ck clock for AHB bus etc + * @dma_clk: dma_bus_ck clock for AXI bus etc * @dr_mode: works in which mode: * host only, device only or dual-role mode * @u2_ports: number of usb2.0 host ports * @u3_ports: number of usb3.0 host ports + * @u3p_dis_msk: mask of disabling usb3 ports, for example, bit0==1 to + * disable u3port0, bit1==1 to disable u3port1,... etc * @dbgfs_root: only used when supports manual dual-role switch via debugfs * @wakeup_en: it's true when supports remote wakeup in host mode - * @wk_deb_p0: port0's wakeup debounce clock - * @wk_deb_p1: it's optional, and depends on port1 is supported or not */ struct ssusb_mtk { struct device *dev; @@ -226,17 +242,18 @@ struct ssusb_mtk { struct regulator *vusb33; struct clk *sys_clk; struct clk *ref_clk; + struct clk *mcu_clk; + struct clk *dma_clk; /* otg */ struct otg_switch_mtk otg_switch; enum usb_dr_mode dr_mode; bool is_host; int u2_ports; int u3_ports; + int u3p_dis_msk; struct dentry *dbgfs_root; /* usb wakeup for host mode */ bool wakeup_en; - struct clk *wk_deb_p0; - struct clk *wk_deb_p1; struct regmap *pericfg; }; |