5 files changed, 30 insertions, 18 deletions

diff --git a/drivers/usb/host/ehci-orion.c b/drivers/usb/host/ehci-orion.c
index 5416cf969005..9d487908012e 100644
--- a/drivers/usb/host/ehci-orion.c
+++ b/drivers/usb/host/ehci-orion.c
@@ -33,8 +33,9 @@
 /*
  * Implement Orion USB controller specification guidelines
  */
-static void orion_usb_setup(struct usb_hcd *hcd)
+static void orion_usb_phy_v1_setup(struct usb_hcd *hcd)
 {
+	/* The below GLs are according to the Orion Errata document */
 	/*
 	 * Clear interrupt cause and mask
 	 */
@@ -258,9 +259,19 @@ static int __init ehci_orion_drv_probe(struct platform_device *pdev)
 		ehci_orion_conf_mbus_windows(hcd, pd->dram);
 
 	/*
-	 * setup Orion USB controller
+	 * setup Orion USB controller.
 	 */
-	orion_usb_setup(hcd);
+	switch (pd->phy_version) {
+	case EHCI_PHY_NA:	/* dont change USB phy settings */
+		break;
+	case EHCI_PHY_ORION:
+		orion_usb_phy_v1_setup(hcd);
+		break;
+	case EHCI_PHY_DD:
+	case EHCI_PHY_KW:
+	default:
+		printk(KERN_WARNING "Orion ehci -USB phy version isn't supported.\n");
+	}
 
 	err = usb_add_hcd(hcd, irq, IRQF_SHARED | IRQF_DISABLED);
 	if (err)
diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c
index 9d0ea573aef6..36864f958444 100644
--- a/drivers/usb/host/ehci-pci.c
+++ b/drivers/usb/host/ehci-pci.c
@@ -169,18 +169,21 @@ static int ehci_pci_setup(struct usb_hcd *hcd)
 		}
 		break;
 	case PCI_VENDOR_ID_ATI:
-		/* SB700 old version has a bug in EHCI controller,
+		/* SB600 and old version of SB700 have a bug in EHCI controller,
 		 * which causes usb devices lose response in some cases.
 		 */
-		if (pdev->device == 0x4396) {
+		if ((pdev->device == 0x4386) || (pdev->device == 0x4396)) {
 			p_smbus = pci_get_device(PCI_VENDOR_ID_ATI,
 						 PCI_DEVICE_ID_ATI_SBX00_SMBUS,
 						 NULL);
 			if (!p_smbus)
 				break;
 			rev = p_smbus->revision;
-			if ((rev == 0x3a) || (rev == 0x3b)) {
+			if ((pdev->device == 0x4386) || (rev == 0x3a)
+			    || (rev == 0x3b)) {
 				u8 tmp;
+				ehci_info(ehci, "applying AMD SB600/SB700 USB "
+					"freeze workaround\n");
 				pci_read_config_byte(pdev, 0x53, &tmp);
 				pci_write_config_byte(pdev, 0x53, tmp | (1<<3));
 			}
diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h
index b11798d17ae5..c7d4b5a06bdb 100644
--- a/drivers/usb/host/ehci.h
+++ b/drivers/usb/host/ehci.h
@@ -183,16 +183,14 @@ timer_action (struct ehci_hcd *ehci, enum ehci_timer_action action)
 	 * the async ring; just the I/O watchdog.  Note that if a
 	 * SHRINK were pending, OFF would never be requested.
 	 */
-	enum ehci_timer_action oldactions = ehci->actions;
+	if (timer_pending(&ehci->watchdog)
+			&& ((BIT(TIMER_ASYNC_SHRINK) | BIT(TIMER_ASYNC_OFF))
+				& ehci->actions))
+		return;
 
 	if (!test_and_set_bit (action, &ehci->actions)) {
 		unsigned long t;
 
-		if (timer_pending(&ehci->watchdog)
-			&& ((BIT(TIMER_ASYNC_SHRINK) | BIT(TIMER_ASYNC_OFF))
-				& oldactions))
-			return;
-
 		switch (action) {
 		case TIMER_IO_WATCHDOG:
 			t = EHCI_IO_JIFFIES;
@@ -208,7 +206,7 @@ timer_action (struct ehci_hcd *ehci, enum ehci_timer_action action)
 			t = DIV_ROUND_UP(EHCI_SHRINK_FRAMES * HZ, 1000) + 1;
 			break;
 		}
-		mod_timer(&ehci->watchdog, round_jiffies(t + jiffies));
+		mod_timer(&ehci->watchdog, t + jiffies);
 	}
 }
 
diff --git a/drivers/usb/host/ohci-omap.c b/drivers/usb/host/ohci-omap.c
index 91697bdb399f..4bbddb73abd9 100644
--- a/drivers/usb/host/ohci-omap.c
+++ b/drivers/usb/host/ohci-omap.c
@@ -18,6 +18,7 @@
 #include <linux/jiffies.h>
 #include <linux/platform_device.h>
 #include <linux/clk.h>
+#include <linux/gpio.h>
 
 #include <mach/hardware.h>
 #include <asm/io.h>
@@ -25,7 +26,6 @@
 
 #include <mach/mux.h>
 #include <mach/irqs.h>
-#include <mach/gpio.h>
 #include <mach/fpga.h>
 #include <mach/usb.h>
 
@@ -254,8 +254,8 @@ static int ohci_omap_init(struct usb_hcd *hcd)
 
 			/* gpio9 for overcurrent detction */
 			omap_cfg_reg(W8_1610_GPIO9);
-			omap_request_gpio(9);
-			omap_set_gpio_direction(9, 1 /* IN */);
+			gpio_request(9, "OHCI overcurrent");
+			gpio_direction_input(9);
 
 			/* for paranoia's sake:  disable USB.PUEN */
 			omap_cfg_reg(W4_USB_HIGHZ);
@@ -407,7 +407,7 @@ usb_hcd_omap_remove (struct usb_hcd *hcd, struct platform_device *pdev)
 		put_device(ohci->transceiver->dev);
 	}
 	if (machine_is_omap_osk())
-		omap_free_gpio(9);
+		gpio_free(9);
 	iounmap(hcd->regs);
 	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
 	usb_put_hcd(hcd);
diff --git a/drivers/usb/host/ohci-pxa27x.c b/drivers/usb/host/ohci-pxa27x.c
index e294d430733b..e44dc2cbca24 100644
--- a/drivers/usb/host/ohci-pxa27x.c
+++ b/drivers/usb/host/ohci-pxa27x.c
@@ -296,7 +296,7 @@ int usb_hcd_pxa27x_probe (const struct hc_driver *driver, struct platform_device
 		return -ENXIO;
 	}
 
-	usb_clk = clk_get(&pdev->dev, "USBCLK");
+	usb_clk = clk_get(&pdev->dev, NULL);
 	if (IS_ERR(usb_clk))
 		return PTR_ERR(usb_clk);