1 files changed, 220 insertions, 19 deletions

diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c
index 944291e10f97..ba3a46b78b75 100644
--- a/drivers/usb/host/ohci-at91.c
+++ b/drivers/usb/host/ohci-at91.c
@@ -35,8 +35,7 @@ extern int usb_disabled(void);
 
 static void at91_start_clock(void)
 {
-	if (cpu_is_at91sam9261() || cpu_is_at91sam9g10())
-		clk_enable(hclk);
+	clk_enable(hclk);
 	clk_enable(iclk);
 	clk_enable(fclk);
 	clocked = 1;
@@ -46,8 +45,7 @@ static void at91_stop_clock(void)
 {
 	clk_disable(fclk);
 	clk_disable(iclk);
-	if (cpu_is_at91sam9261() || cpu_is_at91sam9g10())
-		clk_disable(hclk);
+	clk_disable(hclk);
 	clocked = 0;
 }
 
@@ -142,8 +140,7 @@ static int usb_hcd_at91_probe(const struct hc_driver *driver,
 
 	iclk = clk_get(&pdev->dev, "ohci_clk");
 	fclk = clk_get(&pdev->dev, "uhpck");
-	if (cpu_is_at91sam9261() || cpu_is_at91sam9g10())
-		hclk = clk_get(&pdev->dev, "hck0");
+	hclk = clk_get(&pdev->dev, "hclk");
 
 	at91_start_hc(pdev);
 	ohci_hcd_init(hcd_to_ohci(hcd));
@@ -155,8 +152,7 @@ static int usb_hcd_at91_probe(const struct hc_driver *driver,
 	/* Error handling */
 	at91_stop_hc(pdev);
 
-	if (cpu_is_at91sam9261() || cpu_is_at91sam9g10())
-		clk_put(hclk);
+	clk_put(hclk);
 	clk_put(fclk);
 	clk_put(iclk);
 
@@ -192,8 +188,7 @@ static void usb_hcd_at91_remove(struct usb_hcd *hcd,
 	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
 	usb_put_hcd(hcd);
 
-	if (cpu_is_at91sam9261() || cpu_is_at91sam9g10())
-		clk_put(hclk);
+	clk_put(hclk);
 	clk_put(fclk);
 	clk_put(iclk);
 	fclk = iclk = hclk = NULL;
@@ -223,6 +218,156 @@ ohci_at91_start (struct usb_hcd *hcd)
 	return 0;
 }
 
+static void ohci_at91_usb_set_power(struct at91_usbh_data *pdata, int port, int enable)
+{
+	if (port < 0 || port >= 2)
+		return;
+
+	gpio_set_value(pdata->vbus_pin[port], !pdata->vbus_pin_inverted ^ enable);
+}
+
+static int ohci_at91_usb_get_power(struct at91_usbh_data *pdata, int port)
+{
+	if (port < 0 || port >= 2)
+		return -EINVAL;
+
+	return gpio_get_value(pdata->vbus_pin[port]) ^ !pdata->vbus_pin_inverted;
+}
+
+/*
+ * Update the status data from the hub with the over-current indicator change.
+ */
+static int ohci_at91_hub_status_data(struct usb_hcd *hcd, char *buf)
+{
+	struct at91_usbh_data *pdata = hcd->self.controller->platform_data;
+	int length = ohci_hub_status_data(hcd, buf);
+	int port;
+
+	for (port = 0; port < ARRAY_SIZE(pdata->overcurrent_pin); port++) {
+		if (pdata->overcurrent_changed[port]) {
+			if (! length)
+				length = 1;
+			buf[0] |= 1 << (port + 1);
+		}
+	}
+
+	return length;
+}
+
+/*
+ * Look at the control requests to the root hub and see if we need to override.
+ */
+static int ohci_at91_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
+				 u16 wIndex, char *buf, u16 wLength)
+{
+	struct at91_usbh_data *pdata = hcd->self.controller->platform_data;
+	struct usb_hub_descriptor *desc;
+	int ret = -EINVAL;
+	u32 *data = (u32 *)buf;
+
+	dev_dbg(hcd->self.controller,
+		"ohci_at91_hub_control(%p,0x%04x,0x%04x,0x%04x,%p,%04x)\n",
+		hcd, typeReq, wValue, wIndex, buf, wLength);
+
+	switch (typeReq) {
+	case SetPortFeature:
+		if (wValue == USB_PORT_FEAT_POWER) {
+			dev_dbg(hcd->self.controller, "SetPortFeat: POWER\n");
+			ohci_at91_usb_set_power(pdata, wIndex - 1, 1);
+			goto out;
+		}
+		break;
+
+	case ClearPortFeature:
+		switch (wValue) {
+		case USB_PORT_FEAT_C_OVER_CURRENT:
+			dev_dbg(hcd->self.controller,
+				"ClearPortFeature: C_OVER_CURRENT\n");
+
+			if (wIndex == 1 || wIndex == 2) {
+				pdata->overcurrent_changed[wIndex-1] = 0;
+				pdata->overcurrent_status[wIndex-1] = 0;
+			}
+
+			goto out;
+
+		case USB_PORT_FEAT_OVER_CURRENT:
+			dev_dbg(hcd->self.controller,
+				"ClearPortFeature: OVER_CURRENT\n");
+
+			if (wIndex == 1 || wIndex == 2) {
+				pdata->overcurrent_status[wIndex-1] = 0;
+			}
+
+			goto out;
+
+		case USB_PORT_FEAT_POWER:
+			dev_dbg(hcd->self.controller,
+				"ClearPortFeature: POWER\n");
+
+			if (wIndex == 1 || wIndex == 2) {
+				ohci_at91_usb_set_power(pdata, wIndex - 1, 0);
+				return 0;
+			}
+		}
+		break;
+	}
+
+	ret = ohci_hub_control(hcd, typeReq, wValue, wIndex, buf, wLength);
+	if (ret)
+		goto out;
+
+	switch (typeReq) {
+	case GetHubDescriptor:
+
+		/* update the hub's descriptor */
+
+		desc = (struct usb_hub_descriptor *)buf;
+
+		dev_dbg(hcd->self.controller, "wHubCharacteristics 0x%04x\n",
+			desc->wHubCharacteristics);
+
+		/* remove the old configurations for power-switching, and
+		 * over-current protection, and insert our new configuration
+		 */
+
+		desc->wHubCharacteristics &= ~cpu_to_le16(HUB_CHAR_LPSM);
+		desc->wHubCharacteristics |= cpu_to_le16(0x0001);
+
+		if (pdata->overcurrent_supported) {
+			desc->wHubCharacteristics &= ~cpu_to_le16(HUB_CHAR_OCPM);
+			desc->wHubCharacteristics |=  cpu_to_le16(0x0008|0x0001);
+		}
+
+		dev_dbg(hcd->self.controller, "wHubCharacteristics after 0x%04x\n",
+			desc->wHubCharacteristics);
+
+		return ret;
+
+	case GetPortStatus:
+		/* check port status */
+
+		dev_dbg(hcd->self.controller, "GetPortStatus(%d)\n", wIndex);
+
+		if (wIndex == 1 || wIndex == 2) {
+			if (! ohci_at91_usb_get_power(pdata, wIndex-1)) {
+				*data &= ~cpu_to_le32(RH_PS_PPS);
+			}
+
+			if (pdata->overcurrent_changed[wIndex-1]) {
+				*data |= cpu_to_le32(RH_PS_OCIC);
+			}
+
+			if (pdata->overcurrent_status[wIndex-1]) {
+				*data |= cpu_to_le32(RH_PS_POCI);
+			}
+		}
+	}
+
+ out:
+	return ret;
+}
+
 /*-------------------------------------------------------------------------*/
 
 static const struct hc_driver ohci_at91_hc_driver = {
@@ -258,8 +403,8 @@ static const struct hc_driver ohci_at91_hc_driver = {
 	/*
 	 * root hub support
 	 */
-	.hub_status_data =	ohci_hub_status_data,
-	.hub_control =		ohci_hub_control,
+	.hub_status_data =	ohci_at91_hub_status_data,
+	.hub_control =		ohci_at91_hub_control,
 #ifdef CONFIG_PM
 	.bus_suspend =		ohci_bus_suspend,
 	.bus_resume =		ohci_bus_resume,
@@ -269,22 +414,71 @@ static const struct hc_driver ohci_at91_hc_driver = {
 
 /*-------------------------------------------------------------------------*/
 
+static irqreturn_t ohci_hcd_at91_overcurrent_irq(int irq, void *data)
+{
+	struct platform_device *pdev = data;
+	struct at91_usbh_data *pdata = pdev->dev.platform_data;
+	int val, gpio, port;
+
+	/* From the GPIO notifying the over-current situation, find
+	 * out the corresponding port */
+	gpio = irq_to_gpio(irq);
+	for (port = 0; port < ARRAY_SIZE(pdata->overcurrent_pin); port++) {
+		if (pdata->overcurrent_pin[port] == gpio)
+			break;
+	}
+
+	if (port == ARRAY_SIZE(pdata->overcurrent_pin)) {
+		dev_err(& pdev->dev, "overcurrent interrupt from unknown GPIO\n");
+		return IRQ_HANDLED;
+	}
+
+	val = gpio_get_value(gpio);
+
+	/* When notified of an over-current situation, disable power
+	   on the corresponding port, and mark this port in
+	   over-current. */
+	if (! val) {
+		ohci_at91_usb_set_power(pdata, port, 0);
+		pdata->overcurrent_status[port]  = 1;
+		pdata->overcurrent_changed[port] = 1;
+	}
+
+	dev_dbg(& pdev->dev, "overcurrent situation %s\n",
+		val ? "exited" : "notified");
+
+	return IRQ_HANDLED;
+}
+
+/*-------------------------------------------------------------------------*/
+
 static int ohci_hcd_at91_drv_probe(struct platform_device *pdev)
 {
 	struct at91_usbh_data	*pdata = pdev->dev.platform_data;
 	int			i;
 
 	if (pdata) {
-		/* REVISIT make the driver support per-port power switching,
-		 * and also overcurrent detection.  Here we assume the ports
-		 * are always powered while this driver is active, and use
-		 * active-low power switches.
-		 */
 		for (i = 0; i < ARRAY_SIZE(pdata->vbus_pin); i++) {
 			if (pdata->vbus_pin[i] <= 0)
 				continue;
 			gpio_request(pdata->vbus_pin[i], "ohci_vbus");
-			gpio_direction_output(pdata->vbus_pin[i], 0);
+			ohci_at91_usb_set_power(pdata, i, 1);
+		}
+
+		for (i = 0; i < ARRAY_SIZE(pdata->overcurrent_pin); i++) {
+			int ret;
+
+			if (pdata->overcurrent_pin[i] <= 0)
+				continue;
+			gpio_request(pdata->overcurrent_pin[i], "ohci_overcurrent");
+
+			ret = request_irq(gpio_to_irq(pdata->overcurrent_pin[i]),
+					  ohci_hcd_at91_overcurrent_irq,
+					  IRQF_SHARED, "ohci_overcurrent", pdev);
+			if (ret) {
+				gpio_free(pdata->overcurrent_pin[i]);
+				dev_warn(& pdev->dev, "cannot get GPIO IRQ for overcurrent\n");
+			}
 		}
 	}
 
@@ -301,9 +495,16 @@ static int ohci_hcd_at91_drv_remove(struct platform_device *pdev)
 		for (i = 0; i < ARRAY_SIZE(pdata->vbus_pin); i++) {
 			if (pdata->vbus_pin[i] <= 0)
 				continue;
-			gpio_direction_output(pdata->vbus_pin[i], 1);
+			ohci_at91_usb_set_power(pdata, i, 0);
 			gpio_free(pdata->vbus_pin[i]);
 		}
+
+		for (i = 0; i < ARRAY_SIZE(pdata->overcurrent_pin); i++) {
+			if (pdata->overcurrent_pin[i] <= 0)
+				continue;
+			free_irq(gpio_to_irq(pdata->overcurrent_pin[i]), pdev);
+			gpio_free(pdata->overcurrent_pin[i]);
+		}
 	}
 
 	device_init_wakeup(&pdev->dev, 0);