1 files changed, 36 insertions, 25 deletions

diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 8f8c2157910e..122e64df2f4d 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -829,7 +829,7 @@ static void dwc3_prepare_one_trb(struct dwc3_ep *dep,
 	if (!req->request.no_interrupt && !chain)
 		trb->ctrl |= DWC3_TRB_CTRL_IOC | DWC3_TRB_CTRL_ISP_IMI;
 
-	if (last)
+	if (last && !usb_endpoint_xfer_isoc(dep->endpoint.desc))
 		trb->ctrl |= DWC3_TRB_CTRL_LST;
 
 	if (chain)
@@ -1433,7 +1433,7 @@ static int dwc3_gadget_get_frame(struct usb_gadget *g)
 
 static int __dwc3_gadget_wakeup(struct dwc3 *dwc)
 {
-	unsigned long		timeout;
+	int			retries;
 
 	int			ret;
 	u32			reg;
@@ -1484,9 +1484,9 @@ static int __dwc3_gadget_wakeup(struct dwc3 *dwc)
 	}
 
 	/* poll until Link State changes to ON */
-	timeout = jiffies + msecs_to_jiffies(100);
+	retries = 20000;
 
-	while (!time_after(jiffies, timeout)) {
+	while (retries--) {
 		reg = dwc3_readl(dwc->regs, DWC3_DSTS);
 
 		/* in HS, means ON */
@@ -1955,7 +1955,8 @@ static void dwc3_gadget_free_endpoints(struct dwc3 *dwc)
 
 static int __dwc3_cleanup_done_trbs(struct dwc3 *dwc, struct dwc3_ep *dep,
 		struct dwc3_request *req, struct dwc3_trb *trb,
-		const struct dwc3_event_depevt *event, int status)
+		const struct dwc3_event_depevt *event, int status,
+		int chain)
 {
 	unsigned int		count;
 	unsigned int		s_pkt = 0;
@@ -1964,17 +1965,22 @@ static int __dwc3_cleanup_done_trbs(struct dwc3 *dwc, struct dwc3_ep *dep,
 	dep->queued_requests--;
 	trace_dwc3_complete_trb(dep, trb);
 
+	/*
+	 * If we're in the middle of series of chained TRBs and we
+	 * receive a short transfer along the way, DWC3 will skip
+	 * through all TRBs including the last TRB in the chain (the
+	 * where CHN bit is zero. DWC3 will also avoid clearing HWO
+	 * bit and SW has to do it manually.
+	 *
+	 * We're going to do that here to avoid problems of HW trying
+	 * to use bogus TRBs for transfers.
+	 */
+	if (chain && (trb->ctrl & DWC3_TRB_CTRL_HWO))
+		trb->ctrl &= ~DWC3_TRB_CTRL_HWO;
+
 	if ((trb->ctrl & DWC3_TRB_CTRL_HWO) && status != -ESHUTDOWN)
-		/*
-		 * We continue despite the error. There is not much we
-		 * can do. If we don't clean it up we loop forever. If
-		 * we skip the TRB then it gets overwritten after a
-		 * while since we use them in a ring buffer. A BUG()
-		 * would help. Lets hope that if this occurs, someone
-		 * fixes the root cause instead of looking away :)
-		 */
-		dev_err(dwc->dev, "%s's TRB (%p) still owned by HW\n",
-				dep->name, trb);
+		return 1;
+
 	count = trb->size & DWC3_TRB_SIZE_MASK;
 
 	if (dep->direction) {
@@ -2013,15 +2019,7 @@ static int __dwc3_cleanup_done_trbs(struct dwc3 *dwc, struct dwc3_ep *dep,
 			s_pkt = 1;
 	}
 
-	/*
-	 * We assume here we will always receive the entire data block
-	 * which we should receive. Meaning, if we program RX to
-	 * receive 4K but we receive only 2K, we assume that's all we
-	 * should receive and we simply bounce the request back to the
-	 * gadget driver for further processing.
-	 */
-	req->request.actual += req->request.length - count;
-	if (s_pkt)
+	if (s_pkt && !chain)
 		return 1;
 	if ((event->status & DEPEVT_STATUS_LST) &&
 			(trb->ctrl & (DWC3_TRB_CTRL_LST |
@@ -2040,13 +2038,17 @@ static int dwc3_cleanup_done_reqs(struct dwc3 *dwc, struct dwc3_ep *dep,
 	struct dwc3_trb		*trb;
 	unsigned int		slot;
 	unsigned int		i;
+	int			count = 0;
 	int			ret;
 
 	do {
+		int chain;
+
 		req = next_request(&dep->started_list);
 		if (WARN_ON_ONCE(!req))
 			return 1;
 
+		chain = req->request.num_mapped_sgs > 0;
 		i = 0;
 		do {
 			slot = req->first_trb_index + i;
@@ -2054,13 +2056,22 @@ static int dwc3_cleanup_done_reqs(struct dwc3 *dwc, struct dwc3_ep *dep,
 				slot++;
 			slot %= DWC3_TRB_NUM;
 			trb = &dep->trb_pool[slot];
+			count += trb->size & DWC3_TRB_SIZE_MASK;
 
 			ret = __dwc3_cleanup_done_trbs(dwc, dep, req, trb,
-					event, status);
+					event, status, chain);
 			if (ret)
 				break;
 		} while (++i < req->request.num_mapped_sgs);
 
+		/*
+		 * We assume here we will always receive the entire data block
+		 * which we should receive. Meaning, if we program RX to
+		 * receive 4K but we receive only 2K, we assume that's all we
+		 * should receive and we simply bounce the request back to the
+		 * gadget driver for further processing.
+		 */
+		req->request.actual += req->request.length - count;
 		dwc3_gadget_giveback(dep, req, status);
 
 		if (ret)