1 files changed, 68 insertions, 53 deletions

diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index a7c04e24ca48..babba885978d 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -33,13 +33,6 @@
 
 #include "hub.h"
 
-/* if we are in debug mode, always announce new devices */
-#ifdef DEBUG
-#ifndef CONFIG_USB_ANNOUNCE_NEW_DEVICES
-#define CONFIG_USB_ANNOUNCE_NEW_DEVICES
-#endif
-#endif
-
 #define USB_VENDOR_GENESYS_LOGIC		0x05e3
 #define HUB_QUIRK_CHECK_PORT_AUTOSUSPEND	0x01
 
@@ -1154,7 +1147,8 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type)
 			/* Tell khubd to disconnect the device or
 			 * check for a new connection
 			 */
-			if (udev || (portstatus & USB_PORT_STAT_CONNECTION))
+			if (udev || (portstatus & USB_PORT_STAT_CONNECTION) ||
+			    (portstatus & USB_PORT_STAT_OVERCURRENT))
 				set_bit(port1, hub->change_bits);
 
 		} else if (portstatus & USB_PORT_STAT_ENABLE) {
@@ -1607,7 +1601,7 @@ static void hub_disconnect(struct usb_interface *intf)
 {
 	struct usb_hub *hub = usb_get_intfdata(intf);
 	struct usb_device *hdev = interface_to_usbdev(intf);
-	int i;
+	int port1;
 
 	/* Take the hub off the event list and don't let it be added again */
 	spin_lock_irq(&hub_event_lock);
@@ -1622,11 +1616,15 @@ static void hub_disconnect(struct usb_interface *intf)
 	hub->error = 0;
 	hub_quiesce(hub, HUB_DISCONNECT);
 
-	usb_set_intfdata (intf, NULL);
+	/* Avoid races with recursively_mark_NOTATTACHED() */
+	spin_lock_irq(&device_state_lock);
+	port1 = hdev->maxchild;
+	hdev->maxchild = 0;
+	usb_set_intfdata(intf, NULL);
+	spin_unlock_irq(&device_state_lock);
 
-	for (i = 0; i < hdev->maxchild; i++)
-		usb_hub_remove_port_device(hub, i + 1);
-	hub->hdev->maxchild = 0;
+	for (; port1 > 0; --port1)
+		usb_hub_remove_port_device(hub, port1);
 
 	if (hub->hdev->speed == USB_SPEED_HIGH)
 		highspeed_hubs--;
@@ -2235,17 +2233,13 @@ static int usb_enumerate_device(struct usb_device *udev)
 			return err;
 		}
 	}
-	if (udev->wusb == 1 && udev->authorized == 0) {
-		udev->product = kstrdup("n/a (unauthorized)", GFP_KERNEL);
-		udev->manufacturer = kstrdup("n/a (unauthorized)", GFP_KERNEL);
-		udev->serial = kstrdup("n/a (unauthorized)", GFP_KERNEL);
-	} else {
-		/* read the standard strings and cache them if present */
-		udev->product = usb_cache_string(udev, udev->descriptor.iProduct);
-		udev->manufacturer = usb_cache_string(udev,
-						      udev->descriptor.iManufacturer);
-		udev->serial = usb_cache_string(udev, udev->descriptor.iSerialNumber);
-	}
+
+	/* read the standard strings and cache them if present */
+	udev->product = usb_cache_string(udev, udev->descriptor.iProduct);
+	udev->manufacturer = usb_cache_string(udev,
+					      udev->descriptor.iManufacturer);
+	udev->serial = usb_cache_string(udev, udev->descriptor.iSerialNumber);
+
 	err = usb_enumerate_device_otg(udev);
 	if (err < 0)
 		return err;
@@ -2427,16 +2421,6 @@ int usb_deauthorize_device(struct usb_device *usb_dev)
 	usb_dev->authorized = 0;
 	usb_set_configuration(usb_dev, -1);
 
-	kfree(usb_dev->product);
-	usb_dev->product = kstrdup("n/a (unauthorized)", GFP_KERNEL);
-	kfree(usb_dev->manufacturer);
-	usb_dev->manufacturer = kstrdup("n/a (unauthorized)", GFP_KERNEL);
-	kfree(usb_dev->serial);
-	usb_dev->serial = kstrdup("n/a (unauthorized)", GFP_KERNEL);
-
-	usb_destroy_configuration(usb_dev);
-	usb_dev->descriptor.bNumConfigurations = 0;
-
 out_unauthorized:
 	usb_unlock_device(usb_dev);
 	return 0;
@@ -2464,17 +2448,7 @@ int usb_authorize_device(struct usb_device *usb_dev)
 		goto error_device_descriptor;
 	}
 
-	kfree(usb_dev->product);
-	usb_dev->product = NULL;
-	kfree(usb_dev->manufacturer);
-	usb_dev->manufacturer = NULL;
-	kfree(usb_dev->serial);
-	usb_dev->serial = NULL;
-
 	usb_dev->authorized = 1;
-	result = usb_enumerate_device(usb_dev);
-	if (result < 0)
-		goto error_enumerate;
 	/* Choose and set the configuration.  This registers the interfaces
 	 * with the driver core and lets interface drivers bind to them.
 	 */
@@ -2490,7 +2464,6 @@ int usb_authorize_device(struct usb_device *usb_dev)
 	}
 	dev_info(&usb_dev->dev, "authorized to connect\n");
 
-error_enumerate:
 error_device_descriptor:
 	usb_autosuspend_device(usb_dev);
 error_autoresume:
@@ -2523,10 +2496,25 @@ static unsigned hub_is_wusb(struct usb_hub *hub)
 #define HUB_LONG_RESET_TIME	200
 #define HUB_RESET_TIMEOUT	800
 
+/*
+ * "New scheme" enumeration causes an extra state transition to be
+ * exposed to an xhci host and causes USB3 devices to receive control
+ * commands in the default state.  This has been seen to cause
+ * enumeration failures, so disable this enumeration scheme for USB3
+ * devices.
+ */
+static bool use_new_scheme(struct usb_device *udev, int retry)
+{
+	if (udev->speed == USB_SPEED_SUPER)
+		return false;
+
+	return USE_NEW_SCHEME(retry);
+}
+
 static int hub_port_reset(struct usb_hub *hub, int port1,
 			struct usb_device *udev, unsigned int delay, bool warm);
 
-/* Is a USB 3.0 port in the Inactive or Complinance Mode state?
+/* Is a USB 3.0 port in the Inactive or Compliance Mode state?
  * Port worm reset is required to recover
  */
 static bool hub_port_warm_reset_required(struct usb_hub *hub, u16 portstatus)
@@ -3334,7 +3322,8 @@ static int hub_suspend(struct usb_interface *intf, pm_message_t msg)
 
 		udev = hub->ports[port1 - 1]->child;
 		if (udev && udev->can_submit) {
-			dev_warn(&intf->dev, "port %d nyet suspended\n", port1);
+			dev_warn(&intf->dev, "port %d not suspended yet\n",
+					port1);
 			if (PMSG_IS_AUTO(msg))
 				return -EBUSY;
 		}
@@ -3981,6 +3970,20 @@ static void hub_set_initial_usb2_lpm_policy(struct usb_device *udev)
 	}
 }
 
+static int hub_enable_device(struct usb_device *udev)
+{
+	struct usb_hcd *hcd = bus_to_hcd(udev->bus);
+
+	if (!hcd->driver->enable_device)
+		return 0;
+	if (udev->state == USB_STATE_ADDRESS)
+		return 0;
+	if (udev->state != USB_STATE_DEFAULT)
+		return -EINVAL;
+
+	return hcd->driver->enable_device(hcd, udev);
+}
+
 /* Reset device, (re)assign address, get device descriptor.
  * Device connection must be stable, no more debouncing needed.
  * Returns device in USB_STATE_ADDRESS, except on error.
@@ -4093,7 +4096,7 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1,
 	 * this area, and this is how Linux has done it for ages.
 	 * Change it cautiously.
 	 *
-	 * NOTE:  If USE_NEW_SCHEME() is true we will start by issuing
+	 * NOTE:  If use_new_scheme() is true we will start by issuing
 	 * a 64-byte GET_DESCRIPTOR request.  This is what Windows does,
 	 * so it may help with some non-standards-compliant devices.
 	 * Otherwise we start with SET_ADDRESS and then try to read the
@@ -4101,10 +4104,17 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1,
 	 * value.
 	 */
 	for (i = 0; i < GET_DESCRIPTOR_TRIES; (++i, msleep(100))) {
-		if (USE_NEW_SCHEME(retry_counter) && !(hcd->driver->flags & HCD_USB3)) {
+		bool did_new_scheme = false;
+
+		if (use_new_scheme(udev, retry_counter)) {
 			struct usb_device_descriptor *buf;
 			int r = 0;
 
+			did_new_scheme = true;
+			retval = hub_enable_device(udev);
+			if (retval < 0)
+				goto fail;
+
 #define GET_DESCRIPTOR_BUFSIZE	64
 			buf = kmalloc(GET_DESCRIPTOR_BUFSIZE, GFP_NOIO);
 			if (!buf) {
@@ -4193,7 +4203,11 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1,
 			 *  - read ep0 maxpacket even for high and low speed,
 			 */
 			msleep(10);
-			if (USE_NEW_SCHEME(retry_counter) && !(hcd->driver->flags & HCD_USB3))
+			/* use_new_scheme() checks the speed which may have
+			 * changed since the initial look so we cache the result
+			 * in did_new_scheme
+			 */
+			if (did_new_scheme)
 				break;
 		}
 
@@ -4832,8 +4846,9 @@ static void hub_events(void)
 					hub->ports[i - 1]->child;
 
 				dev_dbg(hub_dev, "warm reset port %d\n", i);
-				if (!udev || !(portstatus &
-						USB_PORT_STAT_CONNECTION)) {
+				if (!udev ||
+				    !(portstatus & USB_PORT_STAT_CONNECTION) ||
+				    udev->state == USB_STATE_NOTATTACHED) {
 					status = hub_port_reset(hub, i,
 							NULL, HUB_BH_RESET_TIME,
 							true);
@@ -4899,7 +4914,7 @@ static void hub_events(void)
 
 static int hub_thread(void *__unused)
 {
-	/* khubd needs to be freezable to avoid intefering with USB-PERSIST
+	/* khubd needs to be freezable to avoid interfering with USB-PERSIST
 	 * port handover.  Otherwise it might see that a full-speed device
 	 * was gone before the EHCI controller had handed its port over to
 	 * the companion full-speed controller.