diff options
Diffstat (limited to 'drivers/ufs/host/ufs-qcom.c')
| -rw-r--r-- | drivers/ufs/host/ufs-qcom.c | 1543 |
1 files changed, 1543 insertions, 0 deletions
diff --git a/drivers/ufs/host/ufs-qcom.c b/drivers/ufs/host/ufs-qcom.c new file mode 100644 index 000000000000..f10d4668814c --- /dev/null +++ b/drivers/ufs/host/ufs-qcom.c @@ -0,0 +1,1543 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) 2013-2016, Linux Foundation. All rights reserved. + */ + +#include <linux/acpi.h> +#include <linux/time.h> +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/phy/phy.h> +#include <linux/gpio/consumer.h> +#include <linux/reset-controller.h> +#include <linux/devfreq.h> + +#include <ufs/ufshcd.h> +#include "ufshcd-pltfrm.h" +#include <ufs/unipro.h> +#include "ufs-qcom.h" +#include <ufs/ufshci.h> +#include <ufs/ufs_quirks.h> + +#define UFS_QCOM_DEFAULT_DBG_PRINT_EN \ + (UFS_QCOM_DBG_PRINT_REGS_EN | UFS_QCOM_DBG_PRINT_TEST_BUS_EN) + +enum { + TSTBUS_UAWM, + TSTBUS_UARM, + TSTBUS_TXUC, + TSTBUS_RXUC, + TSTBUS_DFC, + TSTBUS_TRLUT, + TSTBUS_TMRLUT, + TSTBUS_OCSC, + TSTBUS_UTP_HCI, + TSTBUS_COMBINED, + TSTBUS_WRAPPER, + TSTBUS_UNIPRO, + TSTBUS_MAX, +}; + +static struct ufs_qcom_host *ufs_qcom_hosts[MAX_UFS_QCOM_HOSTS]; + +static void ufs_qcom_get_default_testbus_cfg(struct ufs_qcom_host *host); +static int ufs_qcom_set_dme_vs_core_clk_ctrl_clear_div(struct ufs_hba *hba, + u32 clk_cycles); + +static struct ufs_qcom_host *rcdev_to_ufs_host(struct reset_controller_dev *rcd) +{ + return container_of(rcd, struct ufs_qcom_host, rcdev); +} + +static void ufs_qcom_dump_regs_wrapper(struct ufs_hba *hba, int offset, int len, + const char *prefix, void *priv) +{ + ufshcd_dump_regs(hba, offset, len * 4, prefix); +} + +static int ufs_qcom_get_connected_tx_lanes(struct ufs_hba *hba, u32 *tx_lanes) +{ + int err = 0; + + err = ufshcd_dme_get(hba, + UIC_ARG_MIB(PA_CONNECTEDTXDATALANES), tx_lanes); + if (err) + dev_err(hba->dev, "%s: couldn't read PA_CONNECTEDTXDATALANES %d\n", + __func__, err); + + return err; +} + +static int ufs_qcom_host_clk_get(struct device *dev, + const char *name, struct clk **clk_out, bool optional) +{ + struct clk *clk; + int err = 0; + + clk = devm_clk_get(dev, name); + if (!IS_ERR(clk)) { + *clk_out = clk; + return 0; + } + + err = PTR_ERR(clk); + + if (optional && err == -ENOENT) { + *clk_out = NULL; + return 0; + } + + if (err != -EPROBE_DEFER) + dev_err(dev, "failed to get %s err %d\n", name, err); + + return err; +} + +static int ufs_qcom_host_clk_enable(struct device *dev, + const char *name, struct clk *clk) +{ + int err = 0; + + err = clk_prepare_enable(clk); + if (err) + dev_err(dev, "%s: %s enable failed %d\n", __func__, name, err); + + return err; +} + +static void ufs_qcom_disable_lane_clks(struct ufs_qcom_host *host) +{ + if (!host->is_lane_clks_enabled) + return; + + clk_disable_unprepare(host->tx_l1_sync_clk); + clk_disable_unprepare(host->tx_l0_sync_clk); + clk_disable_unprepare(host->rx_l1_sync_clk); + clk_disable_unprepare(host->rx_l0_sync_clk); + + host->is_lane_clks_enabled = false; +} + +static int ufs_qcom_enable_lane_clks(struct ufs_qcom_host *host) +{ + int err = 0; + struct device *dev = host->hba->dev; + + if (host->is_lane_clks_enabled) + return 0; + + err = ufs_qcom_host_clk_enable(dev, "rx_lane0_sync_clk", + host->rx_l0_sync_clk); + if (err) + goto out; + + err = ufs_qcom_host_clk_enable(dev, "tx_lane0_sync_clk", + host->tx_l0_sync_clk); + if (err) + goto disable_rx_l0; + + err = ufs_qcom_host_clk_enable(dev, "rx_lane1_sync_clk", + host->rx_l1_sync_clk); + if (err) + goto disable_tx_l0; + + err = ufs_qcom_host_clk_enable(dev, "tx_lane1_sync_clk", + host->tx_l1_sync_clk); + if (err) + goto disable_rx_l1; + + host->is_lane_clks_enabled = true; + goto out; + +disable_rx_l1: + clk_disable_unprepare(host->rx_l1_sync_clk); +disable_tx_l0: + clk_disable_unprepare(host->tx_l0_sync_clk); +disable_rx_l0: + clk_disable_unprepare(host->rx_l0_sync_clk); +out: + return err; +} + +static int ufs_qcom_init_lane_clks(struct ufs_qcom_host *host) +{ + int err = 0; + struct device *dev = host->hba->dev; + + if (has_acpi_companion(dev)) + return 0; + + err = ufs_qcom_host_clk_get(dev, "rx_lane0_sync_clk", + &host->rx_l0_sync_clk, false); + if (err) + goto out; + + err = ufs_qcom_host_clk_get(dev, "tx_lane0_sync_clk", + &host->tx_l0_sync_clk, false); + if (err) + goto out; + + /* In case of single lane per direction, don't read lane1 clocks */ + if (host->hba->lanes_per_direction > 1) { + err = ufs_qcom_host_clk_get(dev, "rx_lane1_sync_clk", + &host->rx_l1_sync_clk, false); + if (err) + goto out; + + err = ufs_qcom_host_clk_get(dev, "tx_lane1_sync_clk", + &host->tx_l1_sync_clk, true); + } +out: + return err; +} + +static int ufs_qcom_link_startup_post_change(struct ufs_hba *hba) +{ + u32 tx_lanes; + + return ufs_qcom_get_connected_tx_lanes(hba, &tx_lanes); +} + +static int ufs_qcom_check_hibern8(struct ufs_hba *hba) +{ + int err; + u32 tx_fsm_val = 0; + unsigned long timeout = jiffies + msecs_to_jiffies(HBRN8_POLL_TOUT_MS); + + do { + err = ufshcd_dme_get(hba, + UIC_ARG_MIB_SEL(MPHY_TX_FSM_STATE, + UIC_ARG_MPHY_TX_GEN_SEL_INDEX(0)), + &tx_fsm_val); + if (err || tx_fsm_val == TX_FSM_HIBERN8) + break; + + /* sleep for max. 200us */ + usleep_range(100, 200); + } while (time_before(jiffies, timeout)); + + /* + * we might have scheduled out for long during polling so + * check the state again. + */ + if (time_after(jiffies, timeout)) + err = ufshcd_dme_get(hba, + UIC_ARG_MIB_SEL(MPHY_TX_FSM_STATE, + UIC_ARG_MPHY_TX_GEN_SEL_INDEX(0)), + &tx_fsm_val); + + if (err) { + dev_err(hba->dev, "%s: unable to get TX_FSM_STATE, err %d\n", + __func__, err); + } else if (tx_fsm_val != TX_FSM_HIBERN8) { + err = tx_fsm_val; + dev_err(hba->dev, "%s: invalid TX_FSM_STATE = %d\n", + __func__, err); + } + + return err; +} + +static void ufs_qcom_select_unipro_mode(struct ufs_qcom_host *host) +{ + ufshcd_rmwl(host->hba, QUNIPRO_SEL, + ufs_qcom_cap_qunipro(host) ? QUNIPRO_SEL : 0, + REG_UFS_CFG1); + /* make sure above configuration is applied before we return */ + mb(); +} + +/* + * ufs_qcom_host_reset - reset host controller and PHY + */ +static int ufs_qcom_host_reset(struct ufs_hba *hba) +{ + int ret = 0; + struct ufs_qcom_host *host = ufshcd_get_variant(hba); + bool reenable_intr = false; + + if (!host->core_reset) { + dev_warn(hba->dev, "%s: reset control not set\n", __func__); + goto out; + } + + reenable_intr = hba->is_irq_enabled; + disable_irq(hba->irq); + hba->is_irq_enabled = false; + + ret = reset_control_assert(host->core_reset); + if (ret) { + dev_err(hba->dev, "%s: core_reset assert failed, err = %d\n", + __func__, ret); + goto out; + } + + /* + * The hardware requirement for delay between assert/deassert + * is at least 3-4 sleep clock (32.7KHz) cycles, which comes to + * ~125us (4/32768). To be on the safe side add 200us delay. + */ + usleep_range(200, 210); + + ret = reset_control_deassert(host->core_reset); + if (ret) + dev_err(hba->dev, "%s: core_reset deassert failed, err = %d\n", + __func__, ret); + + usleep_range(1000, 1100); + + if (reenable_intr) { + enable_irq(hba->irq); + hba->is_irq_enabled = true; + } + +out: + return ret; +} + +static int ufs_qcom_power_up_sequence(struct ufs_hba *hba) +{ + struct ufs_qcom_host *host = ufshcd_get_variant(hba); + struct phy *phy = host->generic_phy; + int ret = 0; + bool is_rate_B = UFS_QCOM_LIMIT_HS_RATE == PA_HS_MODE_B; + + /* Reset UFS Host Controller and PHY */ + ret = ufs_qcom_host_reset(hba); + if (ret) + dev_warn(hba->dev, "%s: host reset returned %d\n", + __func__, ret); + + if (is_rate_B) + phy_set_mode(phy, PHY_MODE_UFS_HS_B); + + /* phy initialization - calibrate the phy */ + ret = phy_init(phy); + if (ret) { + dev_err(hba->dev, "%s: phy init failed, ret = %d\n", + __func__, ret); + goto out; + } + + /* power on phy - start serdes and phy's power and clocks */ + ret = phy_power_on(phy); + if (ret) { + dev_err(hba->dev, "%s: phy power on failed, ret = %d\n", + __func__, ret); + goto out_disable_phy; + } + + ufs_qcom_select_unipro_mode(host); + + return 0; + +out_disable_phy: + phy_exit(phy); +out: + return ret; +} + +/* + * The UTP controller has a number of internal clock gating cells (CGCs). + * Internal hardware sub-modules within the UTP controller control the CGCs. + * Hardware CGCs disable the clock to inactivate UTP sub-modules not involved + * in a specific operation, UTP controller CGCs are by default disabled and + * this function enables them (after every UFS link startup) to save some power + * leakage. + */ +static void ufs_qcom_enable_hw_clk_gating(struct ufs_hba *hba) +{ + ufshcd_writel(hba, + ufshcd_readl(hba, REG_UFS_CFG2) | REG_UFS_CFG2_CGC_EN_ALL, + REG_UFS_CFG2); + + /* Ensure that HW clock gating is enabled before next operations */ + mb(); +} + +static int ufs_qcom_hce_enable_notify(struct ufs_hba *hba, + enum ufs_notify_change_status status) +{ + struct ufs_qcom_host *host = ufshcd_get_variant(hba); + int err = 0; + + switch (status) { + case PRE_CHANGE: + ufs_qcom_power_up_sequence(hba); + /* + * The PHY PLL output is the source of tx/rx lane symbol + * clocks, hence, enable the lane clocks only after PHY + * is initialized. + */ + err = ufs_qcom_enable_lane_clks(host); + break; + case POST_CHANGE: + /* check if UFS PHY moved from DISABLED to HIBERN8 */ + err = ufs_qcom_check_hibern8(hba); + ufs_qcom_enable_hw_clk_gating(hba); + ufs_qcom_ice_enable(host); + break; + default: + dev_err(hba->dev, "%s: invalid status %d\n", __func__, status); + err = -EINVAL; + break; + } + return err; +} + +/* + * Returns zero for success and non-zero in case of a failure + */ +static int ufs_qcom_cfg_timers(struct ufs_hba *hba, u32 gear, + u32 hs, u32 rate, bool update_link_startup_timer) +{ + int ret = 0; + struct ufs_qcom_host *host = ufshcd_get_variant(hba); + struct ufs_clk_info *clki; + u32 core_clk_period_in_ns; + u32 tx_clk_cycles_per_us = 0; + unsigned long core_clk_rate = 0; + u32 core_clk_cycles_per_us = 0; + + static u32 pwm_fr_table[][2] = { + {UFS_PWM_G1, 0x1}, + {UFS_PWM_G2, 0x1}, + {UFS_PWM_G3, 0x1}, + {UFS_PWM_G4, 0x1}, + }; + + static u32 hs_fr_table_rA[][2] = { + {UFS_HS_G1, 0x1F}, + {UFS_HS_G2, 0x3e}, + {UFS_HS_G3, 0x7D}, + }; + + static u32 hs_fr_table_rB[][2] = { + {UFS_HS_G1, 0x24}, + {UFS_HS_G2, 0x49}, + {UFS_HS_G3, 0x92}, + }; + + /* + * The Qunipro controller does not use following registers: + * SYS1CLK_1US_REG, TX_SYMBOL_CLK_1US_REG, CLK_NS_REG & + * UFS_REG_PA_LINK_STARTUP_TIMER + * But UTP controller uses SYS1CLK_1US_REG register for Interrupt + * Aggregation logic. + */ + if (ufs_qcom_cap_qunipro(host) && !ufshcd_is_intr_aggr_allowed(hba)) + goto out; + + if (gear == 0) { + dev_err(hba->dev, "%s: invalid gear = %d\n", __func__, gear); + goto out_error; + } + + list_for_each_entry(clki, &hba->clk_list_head, list) { + if (!strcmp(clki->name, "core_clk")) + core_clk_rate = clk_get_rate(clki->clk); + } + + /* If frequency is smaller than 1MHz, set to 1MHz */ + if (core_clk_rate < DEFAULT_CLK_RATE_HZ) + core_clk_rate = DEFAULT_CLK_RATE_HZ; + + core_clk_cycles_per_us = core_clk_rate / USEC_PER_SEC; + if (ufshcd_readl(hba, REG_UFS_SYS1CLK_1US) != core_clk_cycles_per_us) { + ufshcd_writel(hba, core_clk_cycles_per_us, REG_UFS_SYS1CLK_1US); + /* + * make sure above write gets applied before we return from + * this function. + */ + mb(); + } + + if (ufs_qcom_cap_qunipro(host)) + goto out; + + core_clk_period_in_ns = NSEC_PER_SEC / core_clk_rate; + core_clk_period_in_ns <<= OFFSET_CLK_NS_REG; + core_clk_period_in_ns &= MASK_CLK_NS_REG; + + switch (hs) { + case FASTAUTO_MODE: + case FAST_MODE: + if (rate == PA_HS_MODE_A) { + if (gear > ARRAY_SIZE(hs_fr_table_rA)) { + dev_err(hba->dev, + "%s: index %d exceeds table size %zu\n", + __func__, gear, + ARRAY_SIZE(hs_fr_table_rA)); + goto out_error; + } + tx_clk_cycles_per_us = hs_fr_table_rA[gear-1][1]; + } else if (rate == PA_HS_MODE_B) { + if (gear > ARRAY_SIZE(hs_fr_table_rB)) { + dev_err(hba->dev, + "%s: index %d exceeds table size %zu\n", + __func__, gear, + ARRAY_SIZE(hs_fr_table_rB)); + goto out_error; + } + tx_clk_cycles_per_us = hs_fr_table_rB[gear-1][1]; + } else { + dev_err(hba->dev, "%s: invalid rate = %d\n", + __func__, rate); + goto out_error; + } + break; + case SLOWAUTO_MODE: + case SLOW_MODE: + if (gear > ARRAY_SIZE(pwm_fr_table)) { + dev_err(hba->dev, + "%s: index %d exceeds table size %zu\n", + __func__, gear, + ARRAY_SIZE(pwm_fr_table)); + goto out_error; + } + tx_clk_cycles_per_us = pwm_fr_table[gear-1][1]; + break; + case UNCHANGED: + default: + dev_err(hba->dev, "%s: invalid mode = %d\n", __func__, hs); + goto out_error; + } + + if (ufshcd_readl(hba, REG_UFS_TX_SYMBOL_CLK_NS_US) != + (core_clk_period_in_ns | tx_clk_cycles_per_us)) { + /* this register 2 fields shall be written at once */ + ufshcd_writel(hba, core_clk_period_in_ns | tx_clk_cycles_per_us, + REG_UFS_TX_SYMBOL_CLK_NS_US); + /* + * make sure above write gets applied before we return from + * this function. + */ + mb(); + } + + if (update_link_startup_timer) { + ufshcd_writel(hba, ((core_clk_rate / MSEC_PER_SEC) * 100), + REG_UFS_PA_LINK_STARTUP_TIMER); + /* + * make sure that this configuration is applied before + * we return + */ + mb(); + } + goto out; + +out_error: + ret = -EINVAL; +out: + return ret; +} + +static int ufs_qcom_link_startup_notify(struct ufs_hba *hba, + enum ufs_notify_change_status status) +{ + int err = 0; + struct ufs_qcom_host *host = ufshcd_get_variant(hba); + + switch (status) { + case PRE_CHANGE: + if (ufs_qcom_cfg_timers(hba, UFS_PWM_G1, SLOWAUTO_MODE, + 0, true)) { + dev_err(hba->dev, "%s: ufs_qcom_cfg_timers() failed\n", + __func__); + err = -EINVAL; + goto out; + } + + if (ufs_qcom_cap_qunipro(host)) + /* + * set unipro core clock cycles to 150 & clear clock + * divider + */ + err = ufs_qcom_set_dme_vs_core_clk_ctrl_clear_div(hba, + 150); + + /* + * Some UFS devices (and may be host) have issues if LCC is + * enabled. So we are setting PA_Local_TX_LCC_Enable to 0 + * before link startup which will make sure that both host + * and device TX LCC are disabled once link startup is + * completed. + */ + if (ufshcd_get_local_unipro_ver(hba) != UFS_UNIPRO_VER_1_41) + err = ufshcd_disable_host_tx_lcc(hba); + + break; + case POST_CHANGE: + ufs_qcom_link_startup_post_change(hba); + break; + default: + break; + } + +out: + return err; +} + +static void ufs_qcom_device_reset_ctrl(struct ufs_hba *hba, bool asserted) +{ + struct ufs_qcom_host *host = ufshcd_get_variant(hba); + + /* reset gpio is optional */ + if (!host->device_reset) + return; + + gpiod_set_value_cansleep(host->device_reset, asserted); +} + +static int ufs_qcom_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op, + enum ufs_notify_change_status status) +{ + struct ufs_qcom_host *host = ufshcd_get_variant(hba); + struct phy *phy = host->generic_phy; + + if (status == PRE_CHANGE) + return 0; + + if (ufs_qcom_is_link_off(hba)) { + /* + * Disable the tx/rx lane symbol clocks before PHY is + * powered down as the PLL source should be disabled + * after downstream clocks are disabled. + */ + ufs_qcom_disable_lane_clks(host); + phy_power_off(phy); + + /* reset the connected UFS device during power down */ + ufs_qcom_device_reset_ctrl(hba, true); + + } else if (!ufs_qcom_is_link_active(hba)) { + ufs_qcom_disable_lane_clks(host); + } + + return 0; +} + +static int ufs_qcom_resume(struct ufs_hba *hba, enum ufs_pm_op pm_op) +{ + struct ufs_qcom_host *host = ufshcd_get_variant(hba); + struct phy *phy = host->generic_phy; + int err; + + if (ufs_qcom_is_link_off(hba)) { + err = phy_power_on(phy); + if (err) { + dev_err(hba->dev, "%s: failed PHY power on: %d\n", + __func__, err); + return err; + } + + err = ufs_qcom_enable_lane_clks(host); + if (err) + return err; + + } else if (!ufs_qcom_is_link_active(hba)) { + err = ufs_qcom_enable_lane_clks(host); + if (err) + return err; + } + + return ufs_qcom_ice_resume(host); +} + +static void ufs_qcom_dev_ref_clk_ctrl(struct ufs_qcom_host *host, bool enable) +{ + if (host->dev_ref_clk_ctrl_mmio && + (enable ^ host->is_dev_ref_clk_enabled)) { + u32 temp = readl_relaxed(host->dev_ref_clk_ctrl_mmio); + + if (enable) + temp |= host->dev_ref_clk_en_mask; + else + temp &= ~host->dev_ref_clk_en_mask; + + /* + * If we are here to disable this clock it might be immediately + * after entering into hibern8 in which case we need to make + * sure that device ref_clk is active for specific time after + * hibern8 enter. + */ + if (!enable) { + unsigned long gating_wait; + + gating_wait = host->hba->dev_info.clk_gating_wait_us; + if (!gating_wait) { + udelay(1); + } else { + /* + * bRefClkGatingWaitTime defines the minimum + * time for which the reference clock is + * required by device during transition from + * HS-MODE to LS-MODE or HIBERN8 state. Give it + * more delay to be on the safe side. + */ + gating_wait += 10; + usleep_range(gating_wait, gating_wait + 10); + } + } + + writel_relaxed(temp, host->dev_ref_clk_ctrl_mmio); + + /* + * Make sure the write to ref_clk reaches the destination and + * not stored in a Write Buffer (WB). + */ + readl(host->dev_ref_clk_ctrl_mmio); + + /* + * If we call hibern8 exit after this, we need to make sure that + * device ref_clk is stable for at least 1us before the hibern8 + * exit command. + */ + if (enable) + udelay(1); + + host->is_dev_ref_clk_enabled = enable; + } +} + +static int ufs_qcom_pwr_change_notify(struct ufs_hba *hba, + enum ufs_notify_change_status status, + struct ufs_pa_layer_attr *dev_max_params, + struct ufs_pa_layer_attr *dev_req_params) +{ + struct ufs_qcom_host *host = ufshcd_get_variant(hba); + struct ufs_dev_params ufs_qcom_cap; + int ret = 0; + + if (!dev_req_params) { + pr_err("%s: incoming dev_req_params is NULL\n", __func__); + ret = -EINVAL; + goto out; + } + + switch (status) { + case PRE_CHANGE: + ufshcd_init_pwr_dev_param(&ufs_qcom_cap); + ufs_qcom_cap.hs_rate = UFS_QCOM_LIMIT_HS_RATE; + + if (host->hw_ver.major == 0x1) { + /* + * HS-G3 operations may not reliably work on legacy QCOM + * UFS host controller hardware even though capability + * exchange during link startup phase may end up + * negotiating maximum supported gear as G3. + * Hence downgrade the maximum supported gear to HS-G2. + */ + if (ufs_qcom_cap.hs_tx_gear > UFS_HS_G2) + ufs_qcom_cap.hs_tx_gear = UFS_HS_G2; + if (ufs_qcom_cap.hs_rx_gear > UFS_HS_G2) + ufs_qcom_cap.hs_rx_gear = UFS_HS_G2; + } + + ret = ufshcd_get_pwr_dev_param(&ufs_qcom_cap, + dev_max_params, + dev_req_params); + if (ret) { + pr_err("%s: failed to determine capabilities\n", + __func__); + goto out; + } + + /* enable the device ref clock before changing to HS mode */ + if (!ufshcd_is_hs_mode(&hba->pwr_info) && + ufshcd_is_hs_mode(dev_req_params)) + ufs_qcom_dev_ref_clk_ctrl(host, true); + + if (host->hw_ver.major >= 0x4) { + ufshcd_dme_configure_adapt(hba, + dev_req_params->gear_tx, + PA_INITIAL_ADAPT); + } + break; + case POST_CHANGE: + if (ufs_qcom_cfg_timers(hba, dev_req_params->gear_rx, + dev_req_params->pwr_rx, + dev_req_params->hs_rate, false)) { + dev_err(hba->dev, "%s: ufs_qcom_cfg_timers() failed\n", + __func__); + /* + * we return error code at the end of the routine, + * but continue to configure UFS_PHY_TX_LANE_ENABLE + * and bus voting as usual + */ + ret = -EINVAL; + } + + /* cache the power mode parameters to use internally */ + memcpy(&host->dev_req_params, + dev_req_params, sizeof(*dev_req_params)); + + /* disable the device ref clock if entered PWM mode */ + if (ufshcd_is_hs_mode(&hba->pwr_info) && + !ufshcd_is_hs_mode(dev_req_params)) + ufs_qcom_dev_ref_clk_ctrl(host, false); + break; + default: + ret = -EINVAL; + break; + } +out: + return ret; +} + +static int ufs_qcom_quirk_host_pa_saveconfigtime(struct ufs_hba *hba) +{ + int err; + u32 pa_vs_config_reg1; + + err = ufshcd_dme_get(hba, UIC_ARG_MIB(PA_VS_CONFIG_REG1), + &pa_vs_config_reg1); + if (err) + goto out; + + /* Allow extension of MSB bits of PA_SaveConfigTime attribute */ + err = ufshcd_dme_set(hba, UIC_ARG_MIB(PA_VS_CONFIG_REG1), + (pa_vs_config_reg1 | (1 << 12))); + +out: + return err; +} + +static int ufs_qcom_apply_dev_quirks(struct ufs_hba *hba) +{ + int err = 0; + + if (hba->dev_quirks & UFS_DEVICE_QUIRK_HOST_PA_SAVECONFIGTIME) + err = ufs_qcom_quirk_host_pa_saveconfigtime(hba); + + if (hba->dev_info.wmanufacturerid == UFS_VENDOR_WDC) + hba->dev_quirks |= UFS_DEVICE_QUIRK_HOST_PA_TACTIVATE; + + return err; +} + +static u32 ufs_qcom_get_ufs_hci_version(struct ufs_hba *hba) +{ + struct ufs_qcom_host *host = ufshcd_get_variant(hba); + + if (host->hw_ver.major == 0x1) + return ufshci_version(1, 1); + else + return ufshci_version(2, 0); +} + +/** + * ufs_qcom_advertise_quirks - advertise the known QCOM UFS controller quirks + * @hba: host controller instance + * + * QCOM UFS host controller might have some non standard behaviours (quirks) + * than what is specified by UFSHCI specification. Advertise all such + * quirks to standard UFS host controller driver so standard takes them into + * account. + */ +static void ufs_qcom_advertise_quirks(struct ufs_hba *hba) +{ + struct ufs_qcom_host *host = ufshcd_get_variant(hba); + + if (host->hw_ver.major == 0x01) { + hba->quirks |= UFSHCD_QUIRK_DELAY_BEFORE_DME_CMDS + | UFSHCD_QUIRK_BROKEN_PA_RXHSUNTERMCAP + | UFSHCD_QUIRK_DME_PEER_ACCESS_AUTO_MODE; + + if (host->hw_ver.minor == 0x0001 && host->hw_ver.step == 0x0001) + hba->quirks |= UFSHCD_QUIRK_BROKEN_INTR_AGGR; + + hba->quirks |= UFSHCD_QUIRK_BROKEN_LCC; + } + + if (host->hw_ver.major == 0x2) { + hba->quirks |= UFSHCD_QUIRK_BROKEN_UFS_HCI_VERSION; + + if (!ufs_qcom_cap_qunipro(host)) + /* Legacy UniPro mode still need following quirks */ + hba->quirks |= (UFSHCD_QUIRK_DELAY_BEFORE_DME_CMDS + | UFSHCD_QUIRK_DME_PEER_ACCESS_AUTO_MODE + | UFSHCD_QUIRK_BROKEN_PA_RXHSUNTERMCAP); + } +} + +static void ufs_qcom_set_caps(struct ufs_hba *hba) +{ + struct ufs_qcom_host *host = ufshcd_get_variant(hba); + + hba->caps |= UFSHCD_CAP_CLK_GATING | UFSHCD_CAP_HIBERN8_WITH_CLK_GATING; + hba->caps |= UFSHCD_CAP_CLK_SCALING; + hba->caps |= UFSHCD_CAP_AUTO_BKOPS_SUSPEND; + hba->caps |= UFSHCD_CAP_WB_EN; + hba->caps |= UFSHCD_CAP_CRYPTO; + hba->caps |= UFSHCD_CAP_AGGR_POWER_COLLAPSE; + hba->caps |= UFSHCD_CAP_RPM_AUTOSUSPEND; + + if (host->hw_ver.major >= 0x2) { + host->caps = UFS_QCOM_CAP_QUNIPRO | + UFS_QCOM_CAP_RETAIN_SEC_CFG_AFTER_PWR_COLLAPSE; + } +} + +/** + * ufs_qcom_setup_clocks - enables/disable clocks + * @hba: host controller instance + * @on: If true, enable clocks else disable them. + * @status: PRE_CHANGE or POST_CHANGE notify + * + * Returns 0 on success, non-zero on failure. + */ +static int ufs_qcom_setup_clocks(struct ufs_hba *hba, bool on, + enum ufs_notify_change_status status) +{ + struct ufs_qcom_host *host = ufshcd_get_variant(hba); + + /* + * In case ufs_qcom_init() is not yet done, simply ignore. + * This ufs_qcom_setup_clocks() shall be called from + * ufs_qcom_init() after init is done. + */ + if (!host) + return 0; + + switch (status) { + case PRE_CHANGE: + if (!on) { + if (!ufs_qcom_is_link_active(hba)) { + /* disable device ref_clk */ + ufs_qcom_dev_ref_clk_ctrl(host, false); + } + } + break; + case POST_CHANGE: + if (on) { + /* enable the device ref clock for HS mode*/ + if (ufshcd_is_hs_mode(&hba->pwr_info)) + ufs_qcom_dev_ref_clk_ctrl(host, true); + } + break; + } + + return 0; +} + +static int +ufs_qcom_reset_assert(struct reset_controller_dev *rcdev, unsigned long id) +{ + struct ufs_qcom_host *host = rcdev_to_ufs_host(rcdev); + + /* Currently this code only knows about a single reset. */ + WARN_ON(id); + ufs_qcom_assert_reset(host->hba); + /* provide 1ms delay to let the reset pulse propagate. */ + usleep_range(1000, 1100); + return 0; +} + +static int +ufs_qcom_reset_deassert(struct reset_controller_dev *rcdev, unsigned long id) +{ + struct ufs_qcom_host *host = rcdev_to_ufs_host(rcdev); + + /* Currently this code only knows about a single reset. */ + WARN_ON(id); + ufs_qcom_deassert_reset(host->hba); + + /* + * after reset deassertion, phy will need all ref clocks, + * voltage, current to settle down before starting serdes. + */ + usleep_range(1000, 1100); + return 0; +} + +static const struct reset_control_ops ufs_qcom_reset_ops = { + .assert = ufs_qcom_reset_assert, + .deassert = ufs_qcom_reset_deassert, +}; + +/** + * ufs_qcom_init - bind phy with controller + * @hba: host controller instance + * + * Binds PHY with controller and powers up PHY enabling clocks + * and regulators. + * + * Returns -EPROBE_DEFER if binding fails, returns negative error + * on phy power up failure and returns zero on success. + */ +static int ufs_qcom_init(struct ufs_hba *hba) +{ + int err; + struct device *dev = hba->dev; + struct platform_device *pdev = to_platform_device(dev); + struct ufs_qcom_host *host; + struct resource *res; + struct ufs_clk_info *clki; + + host = devm_kzalloc(dev, sizeof(*host), GFP_KERNEL); + if (!host) { + err = -ENOMEM; + dev_err(dev, "%s: no memory for qcom ufs host\n", __func__); + goto out; + } + + /* Make a two way bind between the qcom host and the hba */ + host->hba = hba; + ufshcd_set_variant(hba, host); + + /* Setup the optional reset control of HCI */ + host->core_reset = devm_reset_control_get_optional(hba->dev, "rst"); + if (IS_ERR(host->core_reset)) { + err = dev_err_probe(dev, PTR_ERR(host->core_reset), + "Failed to get reset control\n"); + goto out_variant_clear; + } + + /* Fire up the reset controller. Failure here is non-fatal. */ + host->rcdev.of_node = dev->of_node; + host->rcdev.ops = &ufs_qcom_reset_ops; + host->rcdev.owner = dev->driver->owner; + host->rcdev.nr_resets = 1; + err = devm_reset_controller_register(dev, &host->rcdev); + if (err) { + dev_warn(dev, "Failed to register reset controller\n"); + err = 0; + } + + if (!has_acpi_companion(dev)) { + host->generic_phy = devm_phy_get(dev, "ufsphy"); + if (IS_ERR(host->generic_phy)) { + err = dev_err_probe(dev, PTR_ERR(host->generic_phy), "Failed to get PHY\n"); + goto out_variant_clear; + } + } + + host->device_reset = devm_gpiod_get_optional(dev, "reset", + GPIOD_OUT_HIGH); + if (IS_ERR(host->device_reset)) { + err = PTR_ERR(host->device_reset); + if (err != -EPROBE_DEFER) + dev_err(dev, "failed to acquire reset gpio: %d\n", err); + goto out_variant_clear; + } + + ufs_qcom_get_controller_revision(hba, &host->hw_ver.major, + &host->hw_ver.minor, &host->hw_ver.step); + + /* + * for newer controllers, device reference clock control bit has + * moved inside UFS controller register address space itself. + */ + if (host->hw_ver.major >= 0x02) { + host->dev_ref_clk_ctrl_mmio = hba->mmio_base + REG_UFS_CFG1; + host->dev_ref_clk_en_mask = BIT(26); + } else { + /* "dev_ref_clk_ctrl_mem" is optional resource */ + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, + "dev_ref_clk_ctrl_mem"); + if (res) { + host->dev_ref_clk_ctrl_mmio = + devm_ioremap_resource(dev, res); + if (IS_ERR(host->dev_ref_clk_ctrl_mmio)) + host->dev_ref_clk_ctrl_mmio = NULL; + host->dev_ref_clk_en_mask = BIT(5); + } + } + + list_for_each_entry(clki, &hba->clk_list_head, list) { + if (!strcmp(clki->name, "core_clk_unipro")) + clki->keep_link_active = true; + } + + err = ufs_qcom_init_lane_clks(host); + if (err) + goto out_variant_clear; + + ufs_qcom_set_caps(hba); + ufs_qcom_advertise_quirks(hba); + + err = ufs_qcom_ice_init(host); + if (err) + goto out_variant_clear; + + ufs_qcom_setup_clocks(hba, true, POST_CHANGE); + + if (hba->dev->id < MAX_UFS_QCOM_HOSTS) + ufs_qcom_hosts[hba->dev->id] = host; + + host->dbg_print_en |= UFS_QCOM_DEFAULT_DBG_PRINT_EN; + ufs_qcom_get_default_testbus_cfg(host); + err = ufs_qcom_testbus_config(host); + if (err) { + dev_warn(dev, "%s: failed to configure the testbus %d\n", + __func__, err); + err = 0; + } + + goto out; + +out_variant_clear: + ufshcd_set_variant(hba, NULL); +out: + return err; +} + +static void ufs_qcom_exit(struct ufs_hba *hba) +{ + struct ufs_qcom_host *host = ufshcd_get_variant(hba); + + ufs_qcom_disable_lane_clks(host); + phy_power_off(host->generic_phy); + phy_exit(host->generic_phy); +} + +static int ufs_qcom_set_dme_vs_core_clk_ctrl_clear_div(struct ufs_hba *hba, + u32 clk_cycles) +{ + int err; + u32 core_clk_ctrl_reg; + + if (clk_cycles > DME_VS_CORE_CLK_CTRL_MAX_CORE_CLK_1US_CYCLES_MASK) + return -EINVAL; + + err = ufshcd_dme_get(hba, + UIC_ARG_MIB(DME_VS_CORE_CLK_CTRL), + &core_clk_ctrl_reg); + if (err) + goto out; + + core_clk_ctrl_reg &= ~DME_VS_CORE_CLK_CTRL_MAX_CORE_CLK_1US_CYCLES_MASK; + core_clk_ctrl_reg |= clk_cycles; + + /* Clear CORE_CLK_DIV_EN */ + core_clk_ctrl_reg &= ~DME_VS_CORE_CLK_CTRL_CORE_CLK_DIV_EN_BIT; + + err = ufshcd_dme_set(hba, + UIC_ARG_MIB(DME_VS_CORE_CLK_CTRL), + core_clk_ctrl_reg); +out: + return err; +} + +static int ufs_qcom_clk_scale_up_pre_change(struct ufs_hba *hba) +{ + /* nothing to do as of now */ + return 0; +} + +static int ufs_qcom_clk_scale_up_post_change(struct ufs_hba *hba) +{ + struct ufs_qcom_host *host = ufshcd_get_variant(hba); + + if (!ufs_qcom_cap_qunipro(host)) + return 0; + + /* set unipro core clock cycles to 150 and clear clock divider */ + return ufs_qcom_set_dme_vs_core_clk_ctrl_clear_div(hba, 150); +} + +static int ufs_qcom_clk_scale_down_pre_change(struct ufs_hba *hba) +{ + struct ufs_qcom_host *host = ufshcd_get_variant(hba); + int err; + u32 core_clk_ctrl_reg; + + if (!ufs_qcom_cap_qunipro(host)) + return 0; + + err = ufshcd_dme_get(hba, + UIC_ARG_MIB(DME_VS_CORE_CLK_CTRL), + &core_clk_ctrl_reg); + + /* make sure CORE_CLK_DIV_EN is cleared */ + if (!err && + (core_clk_ctrl_reg & DME_VS_CORE_CLK_CTRL_CORE_CLK_DIV_EN_BIT)) { + core_clk_ctrl_reg &= ~DME_VS_CORE_CLK_CTRL_CORE_CLK_DIV_EN_BIT; + err = ufshcd_dme_set(hba, + UIC_ARG_MIB(DME_VS_CORE_CLK_CTRL), + core_clk_ctrl_reg); + } + + return err; +} + +static int ufs_qcom_clk_scale_down_post_change(struct ufs_hba *hba) +{ + struct ufs_qcom_host *host = ufshcd_get_variant(hba); + + if (!ufs_qcom_cap_qunipro(host)) + return 0; + + /* set unipro core clock cycles to 75 and clear clock divider */ + return ufs_qcom_set_dme_vs_core_clk_ctrl_clear_div(hba, 75); +} + +static int ufs_qcom_clk_scale_notify(struct ufs_hba *hba, + bool scale_up, enum ufs_notify_change_status status) +{ + struct ufs_qcom_host *host = ufshcd_get_variant(hba); + struct ufs_pa_layer_attr *dev_req_params = &host->dev_req_params; + int err = 0; + + if (status == PRE_CHANGE) { + err = ufshcd_uic_hibern8_enter(hba); + if (err) + return err; + if (scale_up) + err = ufs_qcom_clk_scale_up_pre_change(hba); + else + err = ufs_qcom_clk_scale_down_pre_change(hba); + if (err) + ufshcd_uic_hibern8_exit(hba); + + } else { + if (scale_up) + err = ufs_qcom_clk_scale_up_post_change(hba); + else + err = ufs_qcom_clk_scale_down_post_change(hba); + + + if (err || !dev_req_params) { + ufshcd_uic_hibern8_exit(hba); + goto out; + } + + ufs_qcom_cfg_timers(hba, + dev_req_params->gear_rx, + dev_req_params->pwr_rx, + dev_req_params->hs_rate, + false); + ufshcd_uic_hibern8_exit(hba); + } + +out: + return err; +} + +static void ufs_qcom_print_hw_debug_reg_all(struct ufs_hba *hba, + void *priv, void (*print_fn)(struct ufs_hba *hba, + int offset, int num_regs, const char *str, void *priv)) +{ + u32 reg; + struct ufs_qcom_host *host; + + if (unlikely(!hba)) { + pr_err("%s: hba is NULL\n", __func__); + return; + } + if (unlikely(!print_fn)) { + dev_err(hba->dev, "%s: print_fn is NULL\n", __func__); + return; + } + + host = ufshcd_get_variant(hba); + if (!(host->dbg_print_en & UFS_QCOM_DBG_PRINT_REGS_EN)) + return; + + reg = ufs_qcom_get_debug_reg_offset(host, UFS_UFS_DBG_RD_REG_OCSC); + print_fn(hba, reg, 44, "UFS_UFS_DBG_RD_REG_OCSC ", priv); + + reg = ufshcd_readl(hba, REG_UFS_CFG1); + reg |= UTP_DBG_RAMS_EN; + ufshcd_writel(hba, reg, REG_UFS_CFG1); + + reg = ufs_qcom_get_debug_reg_offset(host, UFS_UFS_DBG_RD_EDTL_RAM); + print_fn(hba, reg, 32, "UFS_UFS_DBG_RD_EDTL_RAM ", priv); + + reg = ufs_qcom_get_debug_reg_offset(host, UFS_UFS_DBG_RD_DESC_RAM); + print_fn(hba, reg, 128, "UFS_UFS_DBG_RD_DESC_RAM ", priv); + + reg = ufs_qcom_get_debug_reg_offset(host, UFS_UFS_DBG_RD_PRDT_RAM); + print_fn(hba, reg, 64, "UFS_UFS_DBG_RD_PRDT_RAM ", priv); + + /* clear bit 17 - UTP_DBG_RAMS_EN */ + ufshcd_rmwl(hba, UTP_DBG_RAMS_EN, 0, REG_UFS_CFG1); + + reg = ufs_qcom_get_debug_reg_offset(host, UFS_DBG_RD_REG_UAWM); + print_fn(hba, reg, 4, "UFS_DBG_RD_REG_UAWM ", priv); + + reg = ufs_qcom_get_debug_reg_offset(host, UFS_DBG_RD_REG_UARM); + print_fn(hba, reg, 4, "UFS_DBG_RD_REG_UARM ", priv); + + reg = ufs_qcom_get_debug_reg_offset(host, UFS_DBG_RD_REG_TXUC); + print_fn(hba, reg, 48, "UFS_DBG_RD_REG_TXUC ", priv); + + reg = ufs_qcom_get_debug_reg_offset(host, UFS_DBG_RD_REG_RXUC); + print_fn(hba, reg, 27, "UFS_DBG_RD_REG_RXUC ", priv); + + reg = ufs_qcom_get_debug_reg_offset(host, UFS_DBG_RD_REG_DFC); + print_fn(hba, reg, 19, "UFS_DBG_RD_REG_DFC ", priv); + + reg = ufs_qcom_get_debug_reg_offset(host, UFS_DBG_RD_REG_TRLUT); + print_fn(hba, reg, 34, "UFS_DBG_RD_REG_TRLUT ", priv); + + reg = ufs_qcom_get_debug_reg_offset(host, UFS_DBG_RD_REG_TMRLUT); + print_fn(hba, reg, 9, "UFS_DBG_RD_REG_TMRLUT ", priv); +} + +static void ufs_qcom_enable_test_bus(struct ufs_qcom_host *host) +{ + if (host->dbg_print_en & UFS_QCOM_DBG_PRINT_TEST_BUS_EN) { + ufshcd_rmwl(host->hba, UFS_REG_TEST_BUS_EN, + UFS_REG_TEST_BUS_EN, REG_UFS_CFG1); + ufshcd_rmwl(host->hba, TEST_BUS_EN, TEST_BUS_EN, REG_UFS_CFG1); + } else { + ufshcd_rmwl(host->hba, UFS_REG_TEST_BUS_EN, 0, REG_UFS_CFG1); + ufshcd_rmwl(host->hba, TEST_BUS_EN, 0, REG_UFS_CFG1); + } +} + +static void ufs_qcom_get_default_testbus_cfg(struct ufs_qcom_host *host) +{ + /* provide a legal default configuration */ + host->testbus.select_major = TSTBUS_UNIPRO; + host->testbus.select_minor = 37; +} + +static bool ufs_qcom_testbus_cfg_is_ok(struct ufs_qcom_host *host) +{ + if (host->testbus.select_major >= TSTBUS_MAX) { + dev_err(host->hba->dev, + "%s: UFS_CFG1[TEST_BUS_SEL} may not equal 0x%05X\n", + __func__, host->testbus.select_major); + return false; + } + + return true; +} + +int ufs_qcom_testbus_config(struct ufs_qcom_host *host) +{ + int reg; + int offset; + u32 mask = TEST_BUS_SUB_SEL_MASK; + + if (!host) + return -EINVAL; + + if (!ufs_qcom_testbus_cfg_is_ok(host)) + return -EPERM; + + switch (host->testbus.select_major) { + case TSTBUS_UAWM: + reg = UFS_TEST_BUS_CTRL_0; + offset = 24; + break; + case TSTBUS_UARM: + reg = UFS_TEST_BUS_CTRL_0; + offset = 16; + break; + case TSTBUS_TXUC: + reg = UFS_TEST_BUS_CTRL_0; + offset = 8; + break; + case TSTBUS_RXUC: + reg = UFS_TEST_BUS_CTRL_0; + offset = 0; + break; + case TSTBUS_DFC: + reg = UFS_TEST_BUS_CTRL_1; + offset = 24; + break; + case TSTBUS_TRLUT: + reg = UFS_TEST_BUS_CTRL_1; + offset = 16; + break; + case TSTBUS_TMRLUT: + reg = UFS_TEST_BUS_CTRL_1; + offset = 8; + break; + case TSTBUS_OCSC: + reg = UFS_TEST_BUS_CTRL_1; + offset = 0; + break; + case TSTBUS_WRAPPER: + reg = UFS_TEST_BUS_CTRL_2; + offset = 16; + break; + case TSTBUS_COMBINED: + reg = UFS_TEST_BUS_CTRL_2; + offset = 8; + break; + case TSTBUS_UTP_HCI: + reg = UFS_TEST_BUS_CTRL_2; + offset = 0; + break; + case TSTBUS_UNIPRO: + reg = UFS_UNIPRO_CFG; + offset = 20; + mask = 0xFFF; + break; + /* + * No need for a default case, since + * ufs_qcom_testbus_cfg_is_ok() checks that the configuration + * is legal + */ + } + mask <<= offset; + ufshcd_rmwl(host->hba, TEST_BUS_SEL, + (u32)host->testbus.select_major << 19, + REG_UFS_CFG1); + ufshcd_rmwl(host->hba, mask, + (u32)host->testbus.select_minor << offset, + reg); + ufs_qcom_enable_test_bus(host); + /* + * Make sure the test bus configuration is + * committed before returning. + */ + mb(); + + return 0; +} + +static void ufs_qcom_dump_dbg_regs(struct ufs_hba *hba) +{ + ufshcd_dump_regs(hba, REG_UFS_SYS1CLK_1US, 16 * 4, + "HCI Vendor Specific Registers "); + + ufs_qcom_print_hw_debug_reg_all(hba, NULL, ufs_qcom_dump_regs_wrapper); +} + +/** + * ufs_qcom_device_reset() - toggle the (optional) device reset line + * @hba: per-adapter instance + * + * Toggles the (optional) reset line to reset the attached device. + */ +static int ufs_qcom_device_reset(struct ufs_hba *hba) +{ + struct ufs_qcom_host *host = ufshcd_get_variant(hba); + + /* reset gpio is optional */ + if (!host->device_reset) + return -EOPNOTSUPP; + + /* + * The UFS device shall detect reset pulses of 1us, sleep for 10us to + * be on the safe side. + */ + ufs_qcom_device_reset_ctrl(hba, true); + usleep_range(10, 15); + + ufs_qcom_device_reset_ctrl(hba, false); + usleep_range(10, 15); + + return 0; +} + +#if IS_ENABLED(CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND) +static void ufs_qcom_config_scaling_param(struct ufs_hba *hba, + struct devfreq_dev_profile *p, + struct devfreq_simple_ondemand_data *d) +{ + p->polling_ms = 60; + d->upthreshold = 70; + d->downdifferential = 5; +} +#else +static void ufs_qcom_config_scaling_param(struct ufs_hba *hba, + struct devfreq_dev_profile *p, + struct devfreq_simple_ondemand_data *data) +{ +} +#endif + +/* + * struct ufs_hba_qcom_vops - UFS QCOM specific variant operations + * + * The variant operations configure the necessary controller and PHY + * handshake during initialization. + */ +static const struct ufs_hba_variant_ops ufs_hba_qcom_vops = { + .name = "qcom", + .init = ufs_qcom_init, + .exit = ufs_qcom_exit, + .get_ufs_hci_version = ufs_qcom_get_ufs_hci_version, + .clk_scale_notify = ufs_qcom_clk_scale_notify, + .setup_clocks = ufs_qcom_setup_clocks, + .hce_enable_notify = ufs_qcom_hce_enable_notify, + .link_startup_notify = ufs_qcom_link_startup_notify, + .pwr_change_notify = ufs_qcom_pwr_change_notify, + .apply_dev_quirks = ufs_qcom_apply_dev_quirks, + .suspend = ufs_qcom_suspend, + .resume = ufs_qcom_resume, + .dbg_register_dump = ufs_qcom_dump_dbg_regs, + .device_reset = ufs_qcom_device_reset, + .config_scaling_param = ufs_qcom_config_scaling_param, + .program_key = ufs_qcom_ice_program_key, +}; + +/** + * ufs_qcom_probe - probe routine of the driver + * @pdev: pointer to Platform device handle + * + * Return zero for success and non-zero for failure + */ +static int ufs_qcom_probe(struct platform_device *pdev) +{ + int err; + struct device *dev = &pdev->dev; + + /* Perform generic probe */ + err = ufshcd_pltfrm_init(pdev, &ufs_hba_qcom_vops); + if (err) + dev_err(dev, "ufshcd_pltfrm_init() failed %d\n", err); + + return err; +} + +/** + * ufs_qcom_remove - set driver_data of the device to NULL + * @pdev: pointer to platform device handle + * + * Always returns 0 + */ +static int ufs_qcom_remove(struct platform_device *pdev) +{ + struct ufs_hba *hba = platform_get_drvdata(pdev); + + pm_runtime_get_sync(&(pdev)->dev); + ufshcd_remove(hba); + return 0; +} + +static const struct of_device_id ufs_qcom_of_match[] = { + { .compatible = "qcom,ufshc"}, + {}, +}; +MODULE_DEVICE_TABLE(of, ufs_qcom_of_match); + +#ifdef CONFIG_ACPI +static const struct acpi_device_id ufs_qcom_acpi_match[] = { + { "QCOM24A5" }, + { }, +}; +MODULE_DEVICE_TABLE(acpi, ufs_qcom_acpi_match); +#endif + +static const struct dev_pm_ops ufs_qcom_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(ufshcd_system_suspend, ufshcd_system_resume) + SET_RUNTIME_PM_OPS(ufshcd_runtime_suspend, ufshcd_runtime_resume, NULL) + .prepare = ufshcd_suspend_prepare, + .complete = ufshcd_resume_complete, +}; + +static struct platform_driver ufs_qcom_pltform = { + .probe = ufs_qcom_probe, + .remove = ufs_qcom_remove, + .shutdown = ufshcd_pltfrm_shutdown, + .driver = { + .name = "ufshcd-qcom", + .pm = &ufs_qcom_pm_ops, + .of_match_table = of_match_ptr(ufs_qcom_of_match), + .acpi_match_table = ACPI_PTR(ufs_qcom_acpi_match), + }, +}; +module_platform_driver(ufs_qcom_pltform); + +MODULE_LICENSE("GPL v2"); |