summaryrefslogtreecommitdiff
path: root/drivers/tty
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/tty')
-rw-r--r--drivers/tty/serial/8250/8250_core.c2
-rw-r--r--drivers/tty/serial/8250/8250_exar.c12
-rw-r--r--drivers/tty/serial/8250/8250_mtk.c18
-rw-r--r--drivers/tty/serial/cpm_uart/cpm_uart_core.c9
-rw-r--r--drivers/tty/serial/kgdb_nmi.c2
-rw-r--r--drivers/tty/serial/kgdboc.c32
-rw-r--r--drivers/tty/serial/mxs-auart.c12
-rw-r--r--drivers/tty/serial/serial-tegra.c16
-rw-r--r--drivers/tty/serial/serial_core.c115
-rw-r--r--drivers/tty/serial/sh-sci.c3
-rw-r--r--drivers/tty/serial/xilinx_uartps.c9
-rw-r--r--drivers/tty/vt/vt.c29
12 files changed, 114 insertions, 145 deletions
diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c
index fc118f649887..cae61d1ebec5 100644
--- a/drivers/tty/serial/8250/8250_core.c
+++ b/drivers/tty/serial/8250/8250_core.c
@@ -524,6 +524,7 @@ static void __init serial8250_isa_init_ports(void)
*/
up->mcr_mask = ~ALPHA_KLUDGE_MCR;
up->mcr_force = ALPHA_KLUDGE_MCR;
+ serial8250_set_defaults(up);
}
/* chain base port ops to support Remote Supervisor Adapter */
@@ -547,7 +548,6 @@ static void __init serial8250_isa_init_ports(void)
port->membase = old_serial_port[i].iomem_base;
port->iotype = old_serial_port[i].io_type;
port->regshift = old_serial_port[i].iomem_reg_shift;
- serial8250_set_defaults(up);
port->irqflags |= irqflag;
if (serial8250_isa_config != NULL)
diff --git a/drivers/tty/serial/8250/8250_exar.c b/drivers/tty/serial/8250/8250_exar.c
index ddb6aeb76dc5..04b9af7ed941 100644
--- a/drivers/tty/serial/8250/8250_exar.c
+++ b/drivers/tty/serial/8250/8250_exar.c
@@ -326,7 +326,17 @@ static void setup_gpio(struct pci_dev *pcidev, u8 __iomem *p)
* devices will export them as GPIOs, so we pre-configure them safely
* as inputs.
*/
- u8 dir = pcidev->vendor == PCI_VENDOR_ID_EXAR ? 0xff : 0x00;
+
+ u8 dir = 0x00;
+
+ if ((pcidev->vendor == PCI_VENDOR_ID_EXAR) &&
+ (pcidev->subsystem_vendor != PCI_VENDOR_ID_SEALEVEL)) {
+ // Configure GPIO as inputs for Commtech adapters
+ dir = 0xff;
+ } else {
+ // Configure GPIO as outputs for SeaLevel adapters
+ dir = 0x00;
+ }
writeb(0x00, p + UART_EXAR_MPIOINT_7_0);
writeb(0x00, p + UART_EXAR_MPIOLVL_7_0);
diff --git a/drivers/tty/serial/8250/8250_mtk.c b/drivers/tty/serial/8250/8250_mtk.c
index f839380c2f4c..98b8a3e30733 100644
--- a/drivers/tty/serial/8250/8250_mtk.c
+++ b/drivers/tty/serial/8250/8250_mtk.c
@@ -306,8 +306,21 @@ mtk8250_set_termios(struct uart_port *port, struct ktermios *termios,
}
#endif
+ /*
+ * Store the requested baud rate before calling the generic 8250
+ * set_termios method. Standard 8250 port expects bauds to be
+ * no higher than (uartclk / 16) so the baud will be clamped if it
+ * gets out of that bound. Mediatek 8250 port supports speed
+ * higher than that, therefore we'll get original baud rate back
+ * after calling the generic set_termios method and recalculate
+ * the speed later in this method.
+ */
+ baud = tty_termios_baud_rate(termios);
+
serial8250_do_set_termios(port, termios, old);
+ tty_termios_encode_baud_rate(termios, baud, baud);
+
/*
* Mediatek UARTs use an extra highspeed register (MTK_UART_HIGHS)
*
@@ -339,6 +352,11 @@ mtk8250_set_termios(struct uart_port *port, struct ktermios *termios,
*/
spin_lock_irqsave(&port->lock, flags);
+ /*
+ * Update the per-port timeout.
+ */
+ uart_update_timeout(port, termios->c_cflag, baud);
+
/* set DLAB we have cval saved in up->lcr from the call to the core */
serial_port_out(port, UART_LCR, up->lcr | UART_LCR_DLAB);
serial_dl_write(up, quot);
diff --git a/drivers/tty/serial/cpm_uart/cpm_uart_core.c b/drivers/tty/serial/cpm_uart/cpm_uart_core.c
index a04f74d2e854..4df47d02b34b 100644
--- a/drivers/tty/serial/cpm_uart/cpm_uart_core.c
+++ b/drivers/tty/serial/cpm_uart/cpm_uart_core.c
@@ -1215,7 +1215,12 @@ static int cpm_uart_init_port(struct device_node *np,
pinfo->gpios[i] = NULL;
- gpiod = devm_gpiod_get_index(dev, NULL, i, GPIOD_ASIS);
+ gpiod = devm_gpiod_get_index_optional(dev, NULL, i, GPIOD_ASIS);
+
+ if (IS_ERR(gpiod)) {
+ ret = PTR_ERR(gpiod);
+ goto out_irq;
+ }
if (gpiod) {
if (i == GPIO_RTS || i == GPIO_DTR)
@@ -1237,6 +1242,8 @@ static int cpm_uart_init_port(struct device_node *np,
return cpm_uart_request_port(&pinfo->port);
+out_irq:
+ irq_dispose_mapping(pinfo->port.irq);
out_pram:
cpm_uart_unmap_pram(pinfo, pram);
out_mem:
diff --git a/drivers/tty/serial/kgdb_nmi.c b/drivers/tty/serial/kgdb_nmi.c
index 5022447afa23..6004c0c1d173 100644
--- a/drivers/tty/serial/kgdb_nmi.c
+++ b/drivers/tty/serial/kgdb_nmi.c
@@ -50,7 +50,7 @@ static int kgdb_nmi_console_setup(struct console *co, char *options)
* I/O utilities that messages sent to the console will automatically
* be displayed on the dbg_io.
*/
- dbg_io_ops->is_console = true;
+ dbg_io_ops->cons = co;
return 0;
}
diff --git a/drivers/tty/serial/kgdboc.c b/drivers/tty/serial/kgdboc.c
index 41396982e9e0..84ffede27f23 100644
--- a/drivers/tty/serial/kgdboc.c
+++ b/drivers/tty/serial/kgdboc.c
@@ -45,7 +45,6 @@ static struct platform_device *kgdboc_pdev;
#if IS_BUILTIN(CONFIG_KGDB_SERIAL_CONSOLE)
static struct kgdb_io kgdboc_earlycon_io_ops;
-static struct console *earlycon;
static int (*earlycon_orig_exit)(struct console *con);
#endif /* IS_BUILTIN(CONFIG_KGDB_SERIAL_CONSOLE) */
@@ -145,7 +144,7 @@ static void kgdboc_unregister_kbd(void)
#if IS_BUILTIN(CONFIG_KGDB_SERIAL_CONSOLE)
static void cleanup_earlycon(void)
{
- if (earlycon)
+ if (kgdboc_earlycon_io_ops.cons)
kgdb_unregister_io_module(&kgdboc_earlycon_io_ops);
}
#else /* !IS_BUILTIN(CONFIG_KGDB_SERIAL_CONSOLE) */
@@ -178,7 +177,7 @@ static int configure_kgdboc(void)
goto noconfig;
}
- kgdboc_io_ops.is_console = 0;
+ kgdboc_io_ops.cons = NULL;
kgdb_tty_driver = NULL;
kgdboc_use_kms = 0;
@@ -198,7 +197,7 @@ static int configure_kgdboc(void)
int idx;
if (cons->device && cons->device(cons, &idx) == p &&
idx == tty_line) {
- kgdboc_io_ops.is_console = 1;
+ kgdboc_io_ops.cons = cons;
break;
}
}
@@ -433,7 +432,8 @@ static int kgdboc_earlycon_get_char(void)
{
char c;
- if (!earlycon->read(earlycon, &c, 1))
+ if (!kgdboc_earlycon_io_ops.cons->read(kgdboc_earlycon_io_ops.cons,
+ &c, 1))
return NO_POLL_CHAR;
return c;
@@ -441,7 +441,8 @@ static int kgdboc_earlycon_get_char(void)
static void kgdboc_earlycon_put_char(u8 chr)
{
- earlycon->write(earlycon, &chr, 1);
+ kgdboc_earlycon_io_ops.cons->write(kgdboc_earlycon_io_ops.cons, &chr,
+ 1);
}
static void kgdboc_earlycon_pre_exp_handler(void)
@@ -461,7 +462,7 @@ static void kgdboc_earlycon_pre_exp_handler(void)
* boot if we detect this case.
*/
for_each_console(con)
- if (con == earlycon)
+ if (con == kgdboc_earlycon_io_ops.cons)
return;
already_warned = true;
@@ -484,25 +485,25 @@ static int kgdboc_earlycon_deferred_exit(struct console *con)
static void kgdboc_earlycon_deinit(void)
{
- if (!earlycon)
+ if (!kgdboc_earlycon_io_ops.cons)
return;
- if (earlycon->exit == kgdboc_earlycon_deferred_exit)
+ if (kgdboc_earlycon_io_ops.cons->exit == kgdboc_earlycon_deferred_exit)
/*
* kgdboc_earlycon is exiting but original boot console exit
* was never called (AKA kgdboc_earlycon_deferred_exit()
* didn't ever run). Undo our trap.
*/
- earlycon->exit = earlycon_orig_exit;
- else if (earlycon->exit)
+ kgdboc_earlycon_io_ops.cons->exit = earlycon_orig_exit;
+ else if (kgdboc_earlycon_io_ops.cons->exit)
/*
* We skipped calling the exit() routine so we could try to
* keep using the boot console even after it went away. We're
* finally done so call the function now.
*/
- earlycon->exit(earlycon);
+ kgdboc_earlycon_io_ops.cons->exit(kgdboc_earlycon_io_ops.cons);
- earlycon = NULL;
+ kgdboc_earlycon_io_ops.cons = NULL;
}
static struct kgdb_io kgdboc_earlycon_io_ops = {
@@ -511,7 +512,6 @@ static struct kgdb_io kgdboc_earlycon_io_ops = {
.write_char = kgdboc_earlycon_put_char,
.pre_exception = kgdboc_earlycon_pre_exp_handler,
.deinit = kgdboc_earlycon_deinit,
- .is_console = true,
};
#define MAX_CONSOLE_NAME_LEN (sizeof((struct console *) 0)->name)
@@ -557,10 +557,10 @@ static int __init kgdboc_earlycon_init(char *opt)
goto unlock;
}
- earlycon = con;
+ kgdboc_earlycon_io_ops.cons = con;
pr_info("Going to register kgdb with earlycon '%s'\n", con->name);
if (kgdb_register_io_module(&kgdboc_earlycon_io_ops) != 0) {
- earlycon = NULL;
+ kgdboc_earlycon_io_ops.cons = NULL;
pr_info("Failed to register kgdb with earlycon\n");
} else {
/* Trap exit so we can keep earlycon longer if needed. */
diff --git a/drivers/tty/serial/mxs-auart.c b/drivers/tty/serial/mxs-auart.c
index b4f835e7de23..b784323a6a7b 100644
--- a/drivers/tty/serial/mxs-auart.c
+++ b/drivers/tty/serial/mxs-auart.c
@@ -1698,21 +1698,21 @@ static int mxs_auart_probe(struct platform_device *pdev)
irq = platform_get_irq(pdev, 0);
if (irq < 0) {
ret = irq;
- goto out_disable_clks;
+ goto out_iounmap;
}
s->port.irq = irq;
ret = devm_request_irq(&pdev->dev, irq, mxs_auart_irq_handle, 0,
dev_name(&pdev->dev), s);
if (ret)
- goto out_disable_clks;
+ goto out_iounmap;
platform_set_drvdata(pdev, s);
ret = mxs_auart_init_gpios(s, &pdev->dev);
if (ret) {
dev_err(&pdev->dev, "Failed to initialize GPIOs.\n");
- goto out_disable_clks;
+ goto out_iounmap;
}
/*
@@ -1720,7 +1720,7 @@ static int mxs_auart_probe(struct platform_device *pdev)
*/
ret = mxs_auart_request_gpio_irq(s);
if (ret)
- goto out_disable_clks;
+ goto out_iounmap;
auart_port[s->port.line] = s;
@@ -1746,6 +1746,9 @@ out_free_qpio_irq:
mxs_auart_free_gpio_irq(s);
auart_port[pdev->id] = NULL;
+out_iounmap:
+ iounmap(s->port.membase);
+
out_disable_clks:
if (is_asm9260_auart(s)) {
clk_disable_unprepare(s->clk);
@@ -1761,6 +1764,7 @@ static int mxs_auart_remove(struct platform_device *pdev)
uart_remove_one_port(&auart_driver, &s->port);
auart_port[pdev->id] = NULL;
mxs_auart_free_gpio_irq(s);
+ iounmap(s->port.membase);
if (is_asm9260_auart(s)) {
clk_disable_unprepare(s->clk);
clk_disable_unprepare(s->clk_ahb);
diff --git a/drivers/tty/serial/serial-tegra.c b/drivers/tty/serial/serial-tegra.c
index 8de8bac9c6c7..04d1b0807e66 100644
--- a/drivers/tty/serial/serial-tegra.c
+++ b/drivers/tty/serial/serial-tegra.c
@@ -635,7 +635,7 @@ static void tegra_uart_handle_tx_pio(struct tegra_uart_port *tup)
}
static void tegra_uart_handle_rx_pio(struct tegra_uart_port *tup,
- struct tty_port *tty)
+ struct tty_port *port)
{
do {
char flag = TTY_NORMAL;
@@ -653,16 +653,18 @@ static void tegra_uart_handle_rx_pio(struct tegra_uart_port *tup,
ch = (unsigned char) tegra_uart_read(tup, UART_RX);
tup->uport.icount.rx++;
- if (!uart_handle_sysrq_char(&tup->uport, ch) && tty)
- tty_insert_flip_char(tty, ch, flag);
+ if (uart_handle_sysrq_char(&tup->uport, ch))
+ continue;
if (tup->uport.ignore_status_mask & UART_LSR_DR)
continue;
+
+ tty_insert_flip_char(port, ch, flag);
} while (1);
}
static void tegra_uart_copy_rx_to_tty(struct tegra_uart_port *tup,
- struct tty_port *tty,
+ struct tty_port *port,
unsigned int count)
{
int copied;
@@ -672,17 +674,13 @@ static void tegra_uart_copy_rx_to_tty(struct tegra_uart_port *tup,
return;
tup->uport.icount.rx += count;
- if (!tty) {
- dev_err(tup->uport.dev, "No tty port\n");
- return;
- }
if (tup->uport.ignore_status_mask & UART_LSR_DR)
return;
dma_sync_single_for_cpu(tup->uport.dev, tup->rx_dma_buf_phys,
count, DMA_FROM_DEVICE);
- copied = tty_insert_flip_string(tty,
+ copied = tty_insert_flip_string(port,
((unsigned char *)(tup->rx_dma_buf_virt)), count);
if (copied != count) {
WARN_ON(1);
diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c
index 57840cf90388..5f3daabdc916 100644
--- a/drivers/tty/serial/serial_core.c
+++ b/drivers/tty/serial/serial_core.c
@@ -41,8 +41,6 @@ static struct lock_class_key port_lock_key;
#define HIGH_BITS_OFFSET ((sizeof(long)-sizeof(int))*8)
-#define SYSRQ_TIMEOUT (HZ * 5)
-
static void uart_change_speed(struct tty_struct *tty, struct uart_state *state,
struct ktermios *old_termios);
static void uart_wait_until_sent(struct tty_struct *tty, int timeout);
@@ -1916,6 +1914,12 @@ static inline bool uart_console_enabled(struct uart_port *port)
return uart_console(port) && (port->cons->flags & CON_ENABLED);
}
+static void __uart_port_spin_lock_init(struct uart_port *port)
+{
+ spin_lock_init(&port->lock);
+ lockdep_set_class(&port->lock, &port_lock_key);
+}
+
/*
* Ensure that the serial console lock is initialised early.
* If this port is a console, then the spinlock is already initialised.
@@ -1925,8 +1929,7 @@ static inline void uart_port_spin_lock_init(struct uart_port *port)
if (uart_console(port))
return;
- spin_lock_init(&port->lock);
- lockdep_set_class(&port->lock, &port_lock_key);
+ __uart_port_spin_lock_init(port);
}
#if defined(CONFIG_SERIAL_CORE_CONSOLE) || defined(CONFIG_CONSOLE_POLL)
@@ -2373,6 +2376,13 @@ uart_configure_port(struct uart_driver *drv, struct uart_state *state,
uart_change_pm(state, UART_PM_STATE_ON);
/*
+ * If this driver supports console, and it hasn't been
+ * successfully registered yet, initialise spin lock for it.
+ */
+ if (port->cons && !(port->cons->flags & CON_ENABLED))
+ __uart_port_spin_lock_init(port);
+
+ /*
* Ensure that the modem control lines are de-activated.
* keep the DTR setting that is set in uart_set_options()
* We probably don't need a spinlock around this, but
@@ -3163,7 +3173,7 @@ static DECLARE_WORK(sysrq_enable_work, uart_sysrq_on);
* Returns false if @ch is out of enabling sequence and should be
* handled some other way, true if @ch was consumed.
*/
-static bool uart_try_toggle_sysrq(struct uart_port *port, unsigned int ch)
+bool uart_try_toggle_sysrq(struct uart_port *port, unsigned int ch)
{
int sysrq_toggle_seq_len = strlen(sysrq_toggle_seq);
@@ -3186,99 +3196,9 @@ static bool uart_try_toggle_sysrq(struct uart_port *port, unsigned int ch)
port->sysrq = 0;
return true;
}
-#else
-static inline bool uart_try_toggle_sysrq(struct uart_port *port, unsigned int ch)
-{
- return false;
-}
+EXPORT_SYMBOL_GPL(uart_try_toggle_sysrq);
#endif
-int uart_handle_sysrq_char(struct uart_port *port, unsigned int ch)
-{
- if (!IS_ENABLED(CONFIG_MAGIC_SYSRQ_SERIAL))
- return 0;
-
- if (!port->has_sysrq || !port->sysrq)
- return 0;
-
- if (ch && time_before(jiffies, port->sysrq)) {
- if (sysrq_mask()) {
- handle_sysrq(ch);
- port->sysrq = 0;
- return 1;
- }
- if (uart_try_toggle_sysrq(port, ch))
- return 1;
- }
- port->sysrq = 0;
-
- return 0;
-}
-EXPORT_SYMBOL_GPL(uart_handle_sysrq_char);
-
-int uart_prepare_sysrq_char(struct uart_port *port, unsigned int ch)
-{
- if (!IS_ENABLED(CONFIG_MAGIC_SYSRQ_SERIAL))
- return 0;
-
- if (!port->has_sysrq || !port->sysrq)
- return 0;
-
- if (ch && time_before(jiffies, port->sysrq)) {
- if (sysrq_mask()) {
- port->sysrq_ch = ch;
- port->sysrq = 0;
- return 1;
- }
- if (uart_try_toggle_sysrq(port, ch))
- return 1;
- }
- port->sysrq = 0;
-
- return 0;
-}
-EXPORT_SYMBOL_GPL(uart_prepare_sysrq_char);
-
-void uart_unlock_and_check_sysrq(struct uart_port *port, unsigned long flags)
-__releases(&port->lock)
-{
- if (port->has_sysrq) {
- int sysrq_ch = port->sysrq_ch;
-
- port->sysrq_ch = 0;
- spin_unlock_irqrestore(&port->lock, flags);
- if (sysrq_ch)
- handle_sysrq(sysrq_ch);
- } else {
- spin_unlock_irqrestore(&port->lock, flags);
- }
-}
-EXPORT_SYMBOL_GPL(uart_unlock_and_check_sysrq);
-
-/*
- * We do the SysRQ and SAK checking like this...
- */
-int uart_handle_break(struct uart_port *port)
-{
- struct uart_state *state = port->state;
-
- if (port->handle_break)
- port->handle_break(port);
-
- if (port->has_sysrq && uart_console(port)) {
- if (!port->sysrq) {
- port->sysrq = jiffies + SYSRQ_TIMEOUT;
- return 1;
- }
- port->sysrq = 0;
- }
-
- if (port->flags & UPF_SAK)
- do_SAK(state->port.tty);
- return 0;
-}
-EXPORT_SYMBOL_GPL(uart_handle_break);
-
EXPORT_SYMBOL(uart_write_wakeup);
EXPORT_SYMBOL(uart_register_driver);
EXPORT_SYMBOL(uart_unregister_driver);
@@ -3289,8 +3209,7 @@ EXPORT_SYMBOL(uart_remove_one_port);
/**
* uart_get_rs485_mode() - retrieve rs485 properties for given uart
- * @dev: uart device
- * @rs485conf: output parameter
+ * @port: uart device's target port
*
* This function implements the device tree binding described in
* Documentation/devicetree/bindings/serial/rs485.txt.
diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c
index e1179e74a2b8..204bb68ce3ca 100644
--- a/drivers/tty/serial/sh-sci.c
+++ b/drivers/tty/serial/sh-sci.c
@@ -3301,6 +3301,9 @@ static int sci_probe_single(struct platform_device *dev,
sciport->port.flags |= UPF_HARD_FLOW;
}
+ if (sci_uart_driver.cons->index == sciport->port.line)
+ spin_lock_init(&sciport->port.lock);
+
ret = uart_add_one_port(&sci_uart_driver, &sciport->port);
if (ret) {
sci_cleanup_single(sciport);
diff --git a/drivers/tty/serial/xilinx_uartps.c b/drivers/tty/serial/xilinx_uartps.c
index b9d672af8b65..2833f1418d6d 100644
--- a/drivers/tty/serial/xilinx_uartps.c
+++ b/drivers/tty/serial/xilinx_uartps.c
@@ -1465,7 +1465,6 @@ static int cdns_uart_probe(struct platform_device *pdev)
cdns_uart_uart_driver.nr = CDNS_UART_NR_PORTS;
#ifdef CONFIG_SERIAL_XILINX_PS_UART_CONSOLE
cdns_uart_uart_driver.cons = &cdns_uart_console;
- cdns_uart_console.index = id;
#endif
rc = uart_register_driver(&cdns_uart_uart_driver);
@@ -1581,8 +1580,10 @@ static int cdns_uart_probe(struct platform_device *pdev)
* If register_console() don't assign value, then console_port pointer
* is cleanup.
*/
- if (!console_port)
+ if (!console_port) {
+ cdns_uart_console.index = id;
console_port = port;
+ }
#endif
rc = uart_add_one_port(&cdns_uart_uart_driver, port);
@@ -1595,8 +1596,10 @@ static int cdns_uart_probe(struct platform_device *pdev)
#ifdef CONFIG_SERIAL_XILINX_PS_UART_CONSOLE
/* This is not port which is used for console that's why clean it up */
if (console_port == port &&
- !(cdns_uart_uart_driver.cons->flags & CON_ENABLED))
+ !(cdns_uart_uart_driver.cons->flags & CON_ENABLED)) {
console_port = NULL;
+ cdns_uart_console.index = -1;
+ }
#endif
cdns_uart_data->cts_override = of_property_read_bool(pdev->dev.of_node,
diff --git a/drivers/tty/vt/vt.c b/drivers/tty/vt/vt.c
index 48a8199f7845..42d8c67a481f 100644
--- a/drivers/tty/vt/vt.c
+++ b/drivers/tty/vt/vt.c
@@ -1092,10 +1092,19 @@ static const struct tty_port_operations vc_port_ops = {
.destruct = vc_port_destruct,
};
+/*
+ * Change # of rows and columns (0 means unchanged/the size of fg_console)
+ * [this is to be used together with some user program
+ * like resize that changes the hardware videomode]
+ */
+#define VC_MAXCOL (32767)
+#define VC_MAXROW (32767)
+
int vc_allocate(unsigned int currcons) /* return 0 on success */
{
struct vt_notifier_param param;
struct vc_data *vc;
+ int err;
WARN_CONSOLE_UNLOCKED();
@@ -1125,6 +1134,11 @@ int vc_allocate(unsigned int currcons) /* return 0 on success */
if (!*vc->vc_uni_pagedir_loc)
con_set_default_unimap(vc);
+ err = -EINVAL;
+ if (vc->vc_cols > VC_MAXCOL || vc->vc_rows > VC_MAXROW ||
+ vc->vc_screenbuf_size > KMALLOC_MAX_SIZE || !vc->vc_screenbuf_size)
+ goto err_free;
+ err = -ENOMEM;
vc->vc_screenbuf = kzalloc(vc->vc_screenbuf_size, GFP_KERNEL);
if (!vc->vc_screenbuf)
goto err_free;
@@ -1143,7 +1157,7 @@ err_free:
visual_deinit(vc);
kfree(vc);
vc_cons[currcons].d = NULL;
- return -ENOMEM;
+ return err;
}
static inline int resize_screen(struct vc_data *vc, int width, int height,
@@ -1158,14 +1172,6 @@ static inline int resize_screen(struct vc_data *vc, int width, int height,
return err;
}
-/*
- * Change # of rows and columns (0 means unchanged/the size of fg_console)
- * [this is to be used together with some user program
- * like resize that changes the hardware videomode]
- */
-#define VC_RESIZE_MAXCOL (32767)
-#define VC_RESIZE_MAXROW (32767)
-
/**
* vc_do_resize - resizing method for the tty
* @tty: tty being resized
@@ -1201,7 +1207,7 @@ static int vc_do_resize(struct tty_struct *tty, struct vc_data *vc,
user = vc->vc_resize_user;
vc->vc_resize_user = 0;
- if (cols > VC_RESIZE_MAXCOL || lines > VC_RESIZE_MAXROW)
+ if (cols > VC_MAXCOL || lines > VC_MAXROW)
return -EINVAL;
new_cols = (cols ? cols : vc->vc_cols);
@@ -1212,7 +1218,7 @@ static int vc_do_resize(struct tty_struct *tty, struct vc_data *vc,
if (new_cols == vc->vc_cols && new_rows == vc->vc_rows)
return 0;
- if (new_screen_size > KMALLOC_MAX_SIZE)
+ if (new_screen_size > KMALLOC_MAX_SIZE || !new_screen_size)
return -EINVAL;
newscreen = kzalloc(new_screen_size, GFP_USER);
if (!newscreen)
@@ -3393,6 +3399,7 @@ static int __init con_init(void)
INIT_WORK(&vc_cons[currcons].SAK_work, vc_SAK);
tty_port_init(&vc->port);
visual_init(vc, currcons, 1);
+ /* Assuming vc->vc_{cols,rows,screenbuf_size} are sane here. */
vc->vc_screenbuf = kzalloc(vc->vc_screenbuf_size, GFP_NOWAIT);
vc_init(vc, vc->vc_rows, vc->vc_cols,
currcons || !vc->vc_sw->con_save_screen);
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-24 01:38:26 +0300