diff options
Diffstat (limited to 'drivers/tty')
| -rw-r--r-- | drivers/tty/serial/8250/8250_core.c | 35 |
1 files changed, 34 insertions, 1 deletions
diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c index c8ecfaf49eb4..1449c56506b7 100644 --- a/drivers/tty/serial/8250/8250_core.c +++ b/drivers/tty/serial/8250/8250_core.c @@ -3267,6 +3267,27 @@ serial8250_console_write(struct console *co, const char *s, unsigned int count) else serial_port_out(port, UART_IER, 0); + /* check scratch reg to see if port powered off during system sleep */ + if (up->canary && (up->canary != serial_port_in(port, UART_SCR))) { + struct ktermios termios; + unsigned int baud, quot, frac = 0; + + termios.c_cflag = port->cons->cflag; + if (port->state->port.tty && termios.c_cflag == 0) + termios.c_cflag = port->state->port.tty->termios.c_cflag; + + baud = uart_get_baud_rate(port, &termios, NULL, + port->uartclk / 16 / 0xffff, + port->uartclk / 16); + quot = serial8250_get_divisor(up, baud, &frac); + + serial8250_set_divisor(port, baud, quot, frac); + serial_port_out(port, UART_LCR, up->lcr); + serial_port_out(port, UART_MCR, UART_MCR_DTR | UART_MCR_RTS); + + up->canary = 0; + } + uart_console_write(port, s, count, serial8250_console_putchar); /* @@ -3417,7 +3438,17 @@ int __init early_serial_setup(struct uart_port *port) */ void serial8250_suspend_port(int line) { - uart_suspend_port(&serial8250_reg, &serial8250_ports[line].port); + struct uart_8250_port *up = &serial8250_ports[line]; + struct uart_port *port = &up->port; + + if (!console_suspend_enabled && uart_console(port) && + port->type != PORT_8250) { + unsigned char canary = 0xa5; + serial_out(up, UART_SCR, canary); + up->canary = canary; + } + + uart_suspend_port(&serial8250_reg, port); } /** @@ -3431,6 +3462,8 @@ void serial8250_resume_port(int line) struct uart_8250_port *up = &serial8250_ports[line]; struct uart_port *port = &up->port; + up->canary = 0; + if (up->capabilities & UART_NATSEMI) { /* Ensure it's still in high speed mode */ serial_port_out(port, UART_LCR, 0xE0); |