diff options
Diffstat (limited to 'drivers/tty')
-rw-r--r-- | drivers/tty/amiserial.c | 14 | ||||
-rw-r--r-- | drivers/tty/cyclades.c | 2 | ||||
-rw-r--r-- | drivers/tty/hvc/hvc_opal.c | 2 | ||||
-rw-r--r-- | drivers/tty/hvc/hvc_xen.c | 46 | ||||
-rw-r--r-- | drivers/tty/n_r3964.c | 11 | ||||
-rw-r--r-- | drivers/tty/pty.c | 25 | ||||
-rw-r--r-- | drivers/tty/serial/8250/8250.c | 2 | ||||
-rw-r--r-- | drivers/tty/serial/amba-pl011.c | 45 | ||||
-rw-r--r-- | drivers/tty/serial/crisv10.c | 8 | ||||
-rw-r--r-- | drivers/tty/serial/imx.c | 6 | ||||
-rw-r--r-- | drivers/tty/serial/lantiq.c | 83 | ||||
-rw-r--r-- | drivers/tty/serial/mxs-auart.c | 42 | ||||
-rw-r--r-- | drivers/tty/serial/sb1250-duart.c | 1 | ||||
-rw-r--r-- | drivers/tty/serial/serial_txx9.c | 2 | ||||
-rw-r--r-- | drivers/tty/serial/sh-sci.c | 38 | ||||
-rw-r--r-- | drivers/tty/serial/zs.c | 1 | ||||
-rw-r--r-- | drivers/tty/synclink.c | 4 | ||||
-rw-r--r-- | drivers/tty/synclink_gt.c | 4 | ||||
-rw-r--r-- | drivers/tty/synclinkmp.c | 4 | ||||
-rw-r--r-- | drivers/tty/tty_io.c | 67 | ||||
-rw-r--r-- | drivers/tty/tty_ldisc.c | 67 | ||||
-rw-r--r-- | drivers/tty/tty_mutex.c | 60 | ||||
-rw-r--r-- | drivers/tty/tty_port.c | 6 |
23 files changed, 293 insertions, 247 deletions
diff --git a/drivers/tty/amiserial.c b/drivers/tty/amiserial.c index 35819e312624..6cc4358f68c1 100644 --- a/drivers/tty/amiserial.c +++ b/drivers/tty/amiserial.c @@ -1033,7 +1033,7 @@ static int get_serial_info(struct tty_struct *tty, struct serial_state *state, if (!retinfo) return -EFAULT; memset(&tmp, 0, sizeof(tmp)); - tty_lock(tty); + tty_lock(); tmp.line = tty->index; tmp.port = state->port; tmp.flags = state->tport.flags; @@ -1042,7 +1042,7 @@ static int get_serial_info(struct tty_struct *tty, struct serial_state *state, tmp.close_delay = state->tport.close_delay; tmp.closing_wait = state->tport.closing_wait; tmp.custom_divisor = state->custom_divisor; - tty_unlock(tty); + tty_unlock(); if (copy_to_user(retinfo,&tmp,sizeof(*retinfo))) return -EFAULT; return 0; @@ -1059,12 +1059,12 @@ static int set_serial_info(struct tty_struct *tty, struct serial_state *state, if (copy_from_user(&new_serial,new_info,sizeof(new_serial))) return -EFAULT; - tty_lock(tty); + tty_lock(); change_spd = ((new_serial.flags ^ port->flags) & ASYNC_SPD_MASK) || new_serial.custom_divisor != state->custom_divisor; if (new_serial.irq || new_serial.port != state->port || new_serial.xmit_fifo_size != state->xmit_fifo_size) { - tty_unlock(tty); + tty_unlock(); return -EINVAL; } @@ -1074,7 +1074,7 @@ static int set_serial_info(struct tty_struct *tty, struct serial_state *state, (new_serial.xmit_fifo_size != state->xmit_fifo_size) || ((new_serial.flags & ~ASYNC_USR_MASK) != (port->flags & ~ASYNC_USR_MASK))) { - tty_unlock(tty); + tty_unlock(); return -EPERM; } port->flags = ((port->flags & ~ASYNC_USR_MASK) | @@ -1084,7 +1084,7 @@ static int set_serial_info(struct tty_struct *tty, struct serial_state *state, } if (new_serial.baud_base < 9600) { - tty_unlock(tty); + tty_unlock(); return -EINVAL; } @@ -1116,7 +1116,7 @@ check_and_exit: } } else retval = startup(tty, state); - tty_unlock(tty); + tty_unlock(); return retval; } diff --git a/drivers/tty/cyclades.c b/drivers/tty/cyclades.c index 6984e1a2686a..e61cabdd69df 100644 --- a/drivers/tty/cyclades.c +++ b/drivers/tty/cyclades.c @@ -1599,7 +1599,7 @@ static int cy_open(struct tty_struct *tty, struct file *filp) * If the port is the middle of closing, bail out now */ if (tty_hung_up_p(filp) || (info->port.flags & ASYNC_CLOSING)) { - wait_event_interruptible_tty(tty, info->port.close_wait, + wait_event_interruptible_tty(info->port.close_wait, !(info->port.flags & ASYNC_CLOSING)); return (info->port.flags & ASYNC_HUP_NOTIFY) ? -EAGAIN: -ERESTARTSYS; } diff --git a/drivers/tty/hvc/hvc_opal.c b/drivers/tty/hvc/hvc_opal.c index ced26c8ccd57..0d2ea0c224c3 100644 --- a/drivers/tty/hvc/hvc_opal.c +++ b/drivers/tty/hvc/hvc_opal.c @@ -401,7 +401,7 @@ out: } #ifdef CONFIG_PPC_EARLY_DEBUG_OPAL_RAW -void __init udbg_init_debug_opal(void) +void __init udbg_init_debug_opal_raw(void) { u32 index = CONFIG_PPC_EARLY_DEBUG_OPAL_VTERMNO; hvc_opal_privs[index] = &hvc_opal_boot_priv; diff --git a/drivers/tty/hvc/hvc_xen.c b/drivers/tty/hvc/hvc_xen.c index d3d91dae065c..1e456dca4f60 100644 --- a/drivers/tty/hvc/hvc_xen.c +++ b/drivers/tty/hvc/hvc_xen.c @@ -209,29 +209,28 @@ static int xen_hvm_console_init(void) info = kzalloc(sizeof(struct xencons_info), GFP_KERNEL | __GFP_ZERO); if (!info) return -ENOMEM; - } - - /* already configured */ - if (info->intf != NULL) + } else if (info->intf != NULL) { + /* already configured */ return 0; - - r = hvm_get_parameter(HVM_PARAM_CONSOLE_EVTCHN, &v); - if (r < 0) { - kfree(info); - return -ENODEV; } + /* + * If the toolstack (or the hypervisor) hasn't set these values, the + * default value is 0. Even though mfn = 0 and evtchn = 0 are + * theoretically correct values, in practice they never are and they + * mean that a legacy toolstack hasn't initialized the pv console correctly. + */ + r = hvm_get_parameter(HVM_PARAM_CONSOLE_EVTCHN, &v); + if (r < 0 || v == 0) + goto err; info->evtchn = v; - hvm_get_parameter(HVM_PARAM_CONSOLE_PFN, &v); - if (r < 0) { - kfree(info); - return -ENODEV; - } + v = 0; + r = hvm_get_parameter(HVM_PARAM_CONSOLE_PFN, &v); + if (r < 0 || v == 0) + goto err; mfn = v; info->intf = ioremap(mfn << PAGE_SHIFT, PAGE_SIZE); - if (info->intf == NULL) { - kfree(info); - return -ENODEV; - } + if (info->intf == NULL) + goto err; info->vtermno = HVC_COOKIE; spin_lock(&xencons_lock); @@ -239,6 +238,9 @@ static int xen_hvm_console_init(void) spin_unlock(&xencons_lock); return 0; +err: + kfree(info); + return -ENODEV; } static int xen_pv_console_init(void) @@ -256,12 +258,10 @@ static int xen_pv_console_init(void) info = kzalloc(sizeof(struct xencons_info), GFP_KERNEL | __GFP_ZERO); if (!info) return -ENOMEM; - } - - /* already configured */ - if (info->intf != NULL) + } else if (info->intf != NULL) { + /* already configured */ return 0; - + } info->evtchn = xen_start_info->console.domU.evtchn; info->intf = mfn_to_virt(xen_start_info->console.domU.mfn); info->vtermno = HVC_COOKIE; diff --git a/drivers/tty/n_r3964.c b/drivers/tty/n_r3964.c index 656ad93bbc96..5c6c31459a2f 100644 --- a/drivers/tty/n_r3964.c +++ b/drivers/tty/n_r3964.c @@ -1065,8 +1065,7 @@ static ssize_t r3964_read(struct tty_struct *tty, struct file *file, TRACE_L("read()"); - /* FIXME: should use a private lock */ - tty_lock(tty); + tty_lock(); pClient = findClient(pInfo, task_pid(current)); if (pClient) { @@ -1078,7 +1077,7 @@ static ssize_t r3964_read(struct tty_struct *tty, struct file *file, goto unlock; } /* block until there is a message: */ - wait_event_interruptible_tty(tty, pInfo->read_wait, + wait_event_interruptible_tty(pInfo->read_wait, (pMsg = remove_msg(pInfo, pClient))); } @@ -1108,7 +1107,7 @@ static ssize_t r3964_read(struct tty_struct *tty, struct file *file, } ret = -EPERM; unlock: - tty_unlock(tty); + tty_unlock(); return ret; } @@ -1157,7 +1156,7 @@ static ssize_t r3964_write(struct tty_struct *tty, struct file *file, pHeader->locks = 0; pHeader->owner = NULL; - tty_lock(tty); + tty_lock(); pClient = findClient(pInfo, task_pid(current)); if (pClient) { @@ -1176,7 +1175,7 @@ static ssize_t r3964_write(struct tty_struct *tty, struct file *file, add_tx_queue(pInfo, pHeader); trigger_transmit(pInfo); - tty_unlock(tty); + tty_unlock(); return 0; } diff --git a/drivers/tty/pty.c b/drivers/tty/pty.c index 65c7c62c7aae..5505ffc91da4 100644 --- a/drivers/tty/pty.c +++ b/drivers/tty/pty.c @@ -47,7 +47,6 @@ static void pty_close(struct tty_struct *tty, struct file *filp) wake_up_interruptible(&tty->read_wait); wake_up_interruptible(&tty->write_wait); tty->packet = 0; - /* Review - krefs on tty_link ?? */ if (!tty->link) return; tty->link->packet = 0; @@ -63,9 +62,9 @@ static void pty_close(struct tty_struct *tty, struct file *filp) mutex_unlock(&devpts_mutex); } #endif - tty_unlock(tty); + tty_unlock(); tty_vhangup(tty->link); - tty_lock(tty); + tty_lock(); } } @@ -623,27 +622,26 @@ static int ptmx_open(struct inode *inode, struct file *filp) return retval; /* find a device that is not in use. */ - mutex_lock(&devpts_mutex); + tty_lock(); index = devpts_new_index(inode); + tty_unlock(); if (index < 0) { retval = index; goto err_file; } - mutex_unlock(&devpts_mutex); - mutex_lock(&tty_mutex); + mutex_lock(&devpts_mutex); tty = tty_init_dev(ptm_driver, index); + mutex_unlock(&devpts_mutex); + tty_lock(); + mutex_unlock(&tty_mutex); if (IS_ERR(tty)) { retval = PTR_ERR(tty); goto out; } - /* The tty returned here is locked so we can safely - drop the mutex */ - mutex_unlock(&tty_mutex); - set_bit(TTY_PTY_LOCK, &tty->flags); /* LOCK THE SLAVE */ tty_add_file(tty, filp); @@ -656,17 +654,16 @@ static int ptmx_open(struct inode *inode, struct file *filp) if (retval) goto err_release; - tty_unlock(tty); + tty_unlock(); return 0; err_release: - tty_unlock(tty); + tty_unlock(); tty_release(inode, filp); return retval; out: - mutex_unlock(&tty_mutex); devpts_kill_index(inode, index); + tty_unlock(); err_file: - mutex_unlock(&devpts_mutex); tty_free_file(filp); return retval; } diff --git a/drivers/tty/serial/8250/8250.c b/drivers/tty/serial/8250/8250.c index 47d061b9ad4d..6e1958a325bd 100644 --- a/drivers/tty/serial/8250/8250.c +++ b/drivers/tty/serial/8250/8250.c @@ -3113,7 +3113,7 @@ static struct uart_8250_port *serial8250_find_match_or_unused(struct uart_port * /** * serial8250_register_8250_port - register a serial port - * @port: serial port template + * @up: serial port template * * Configure the serial port specified by the request. If the * port exists and is in use, it is hung up and unregistered diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c index 4ad721fb8405..c17923ec6e95 100644 --- a/drivers/tty/serial/amba-pl011.c +++ b/drivers/tty/serial/amba-pl011.c @@ -133,6 +133,10 @@ struct pl011_dmatx_data { struct uart_amba_port { struct uart_port port; struct clk *clk; + /* Two optional pin states - default & sleep */ + struct pinctrl *pinctrl; + struct pinctrl_state *pins_default; + struct pinctrl_state *pins_sleep; const struct vendor_data *vendor; unsigned int dmacr; /* dma control reg */ unsigned int im; /* interrupt mask */ @@ -1312,6 +1316,14 @@ static int pl011_startup(struct uart_port *port) unsigned int cr; int retval; + /* Optionaly enable pins to be muxed in and configured */ + if (!IS_ERR(uap->pins_default)) { + retval = pinctrl_select_state(uap->pinctrl, uap->pins_default); + if (retval) + dev_err(port->dev, + "could not set default pins\n"); + } + retval = clk_prepare(uap->clk); if (retval) goto out; @@ -1420,6 +1432,7 @@ static void pl011_shutdown(struct uart_port *port) { struct uart_amba_port *uap = (struct uart_amba_port *)port; unsigned int cr; + int retval; /* * disable all interrupts @@ -1462,6 +1475,14 @@ static void pl011_shutdown(struct uart_port *port) */ clk_disable(uap->clk); clk_unprepare(uap->clk); + /* Optionally let pins go into sleep states */ + if (!IS_ERR(uap->pins_sleep)) { + retval = pinctrl_select_state(uap->pinctrl, uap->pins_sleep); + if (retval) + dev_err(port->dev, + "could not set pins to sleep state\n"); + } + if (uap->port.dev->platform_data) { struct amba_pl011_data *plat; @@ -1792,6 +1813,14 @@ static int __init pl011_console_setup(struct console *co, char *options) if (!uap) return -ENODEV; + /* Allow pins to be muxed in and configured */ + if (!IS_ERR(uap->pins_default)) { + ret = pinctrl_select_state(uap->pinctrl, uap->pins_default); + if (ret) + dev_err(uap->port.dev, + "could not set default pins\n"); + } + ret = clk_prepare(uap->clk); if (ret) return ret; @@ -1844,7 +1873,6 @@ static int pl011_probe(struct amba_device *dev, const struct amba_id *id) { struct uart_amba_port *uap; struct vendor_data *vendor = id->data; - struct pinctrl *pinctrl; void __iomem *base; int i, ret; @@ -1869,11 +1897,20 @@ static int pl011_probe(struct amba_device *dev, const struct amba_id *id) goto free; } - pinctrl = devm_pinctrl_get_select_default(&dev->dev); - if (IS_ERR(pinctrl)) { - ret = PTR_ERR(pinctrl); + uap->pinctrl = devm_pinctrl_get(&dev->dev); + if (IS_ERR(uap->pinctrl)) { + ret = PTR_ERR(uap->pinctrl); goto unmap; } + uap->pins_default = pinctrl_lookup_state(uap->pinctrl, + PINCTRL_STATE_DEFAULT); + if (IS_ERR(uap->pins_default)) + dev_err(&dev->dev, "could not get default pinstate\n"); + + uap->pins_sleep = pinctrl_lookup_state(uap->pinctrl, + PINCTRL_STATE_SLEEP); + if (IS_ERR(uap->pins_sleep)) + dev_dbg(&dev->dev, "could not get sleep pinstate\n"); uap->clk = clk_get(&dev->dev, NULL); if (IS_ERR(uap->clk)) { diff --git a/drivers/tty/serial/crisv10.c b/drivers/tty/serial/crisv10.c index 7264d4d26717..80b6b1b1f725 100644 --- a/drivers/tty/serial/crisv10.c +++ b/drivers/tty/serial/crisv10.c @@ -3976,7 +3976,7 @@ block_til_ready(struct tty_struct *tty, struct file * filp, */ if (tty_hung_up_p(filp) || (info->flags & ASYNC_CLOSING)) { - wait_event_interruptible_tty(tty, info->close_wait, + wait_event_interruptible_tty(info->close_wait, !(info->flags & ASYNC_CLOSING)); #ifdef SERIAL_DO_RESTART if (info->flags & ASYNC_HUP_NOTIFY) @@ -4052,9 +4052,9 @@ block_til_ready(struct tty_struct *tty, struct file * filp, printk("block_til_ready blocking: ttyS%d, count = %d\n", info->line, info->count); #endif - tty_unlock(tty); + tty_unlock(); schedule(); - tty_lock(tty); + tty_lock(); } set_current_state(TASK_RUNNING); remove_wait_queue(&info->open_wait, &wait); @@ -4115,7 +4115,7 @@ rs_open(struct tty_struct *tty, struct file * filp) */ if (tty_hung_up_p(filp) || (info->flags & ASYNC_CLOSING)) { - wait_event_interruptible_tty(tty, info->close_wait, + wait_event_interruptible_tty(info->close_wait, !(info->flags & ASYNC_CLOSING)); #ifdef SERIAL_DO_RESTART return ((info->flags & ASYNC_HUP_NOTIFY) ? diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c index 4ef747307ecb..d5c689d6217e 100644 --- a/drivers/tty/serial/imx.c +++ b/drivers/tty/serial/imx.c @@ -169,7 +169,6 @@ #define SERIAL_IMX_MAJOR 207 #define MINOR_START 16 #define DEV_NAME "ttymxc" -#define MAX_INTERNAL_IRQ MXC_INTERNAL_IRQS /* * This determines how often we check the modem status signals @@ -741,10 +740,7 @@ static int imx_startup(struct uart_port *port) /* do not use RTS IRQ on IrDA */ if (!USE_IRDA(sport)) { - retval = request_irq(sport->rtsirq, imx_rtsint, - (sport->rtsirq < MAX_INTERNAL_IRQ) ? 0 : - IRQF_TRIGGER_FALLING | - IRQF_TRIGGER_RISING, + retval = request_irq(sport->rtsirq, imx_rtsint, 0, DRIVER_NAME, sport); if (retval) goto error_out3; diff --git a/drivers/tty/serial/lantiq.c b/drivers/tty/serial/lantiq.c index 96c1cacc7360..02da071fe1e7 100644 --- a/drivers/tty/serial/lantiq.c +++ b/drivers/tty/serial/lantiq.c @@ -31,16 +31,19 @@ #include <linux/tty_flip.h> #include <linux/serial_core.h> #include <linux/serial.h> -#include <linux/platform_device.h> +#include <linux/of_platform.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> #include <linux/io.h> #include <linux/clk.h> +#include <linux/gpio.h> #include <lantiq_soc.h> #define PORT_LTQ_ASC 111 #define MAXPORTS 2 #define UART_DUMMY_UER_RX 1 -#define DRVNAME "ltq_asc" +#define DRVNAME "lantiq,asc" #ifdef __BIG_ENDIAN #define LTQ_ASC_TBUF (0x0020 + 3) #define LTQ_ASC_RBUF (0x0024 + 3) @@ -114,6 +117,9 @@ static DEFINE_SPINLOCK(ltq_asc_lock); struct ltq_uart_port { struct uart_port port; + /* clock used to derive divider */ + struct clk *fpiclk; + /* clock gating of the ASC core */ struct clk *clk; unsigned int tx_irq; unsigned int rx_irq; @@ -316,7 +322,9 @@ lqasc_startup(struct uart_port *port) struct ltq_uart_port *ltq_port = to_ltq_uart_port(port); int retval; - port->uartclk = clk_get_rate(ltq_port->clk); + if (ltq_port->clk) + clk_enable(ltq_port->clk); + port->uartclk = clk_get_rate(ltq_port->fpiclk); ltq_w32_mask(ASCCLC_DISS | ASCCLC_RMCMASK, (1 << ASCCLC_RMCOFFSET), port->membase + LTQ_ASC_CLC); @@ -382,6 +390,8 @@ lqasc_shutdown(struct uart_port *port) port->membase + LTQ_ASC_RXFCON); ltq_w32_mask(ASCTXFCON_TXFEN, ASCTXFCON_TXFFLU, port->membase + LTQ_ASC_TXFCON); + if (ltq_port->clk) + clk_disable(ltq_port->clk); } static void @@ -630,7 +640,7 @@ lqasc_console_setup(struct console *co, char *options) port = <q_port->port; - port->uartclk = clk_get_rate(ltq_port->clk); + port->uartclk = clk_get_rate(ltq_port->fpiclk); if (options) uart_parse_options(options, &baud, &parity, &bits, &flow); @@ -668,37 +678,32 @@ static struct uart_driver lqasc_reg = { static int __init lqasc_probe(struct platform_device *pdev) { + struct device_node *node = pdev->dev.of_node; struct ltq_uart_port *ltq_port; struct uart_port *port; - struct resource *mmres, *irqres; - int tx_irq, rx_irq, err_irq; - struct clk *clk; + struct resource *mmres, irqres[3]; + int line = 0; int ret; mmres = platform_get_resource(pdev, IORESOURCE_MEM, 0); - irqres = platform_get_resource(pdev, IORESOURCE_IRQ, 0); - if (!mmres || !irqres) + ret = of_irq_to_resource_table(node, irqres, 3); + if (!mmres || (ret != 3)) { + dev_err(&pdev->dev, + "failed to get memory/irq for serial port\n"); return -ENODEV; + } - if (pdev->id >= MAXPORTS) - return -EBUSY; + /* check if this is the console port */ + if (mmres->start != CPHYSADDR(LTQ_EARLY_ASC)) + line = 1; - if (lqasc_port[pdev->id] != NULL) + if (lqasc_port[line]) { + dev_err(&pdev->dev, "port %d already allocated\n", line); return -EBUSY; - - clk = clk_get(&pdev->dev, "fpi"); - if (IS_ERR(clk)) { - pr_err("failed to get fpi clk\n"); - return -ENOENT; } - tx_irq = platform_get_irq_byname(pdev, "tx"); - rx_irq = platform_get_irq_byname(pdev, "rx"); - err_irq = platform_get_irq_byname(pdev, "err"); - if ((tx_irq < 0) | (rx_irq < 0) | (err_irq < 0)) - return -ENODEV; - - ltq_port = kzalloc(sizeof(struct ltq_uart_port), GFP_KERNEL); + ltq_port = devm_kzalloc(&pdev->dev, sizeof(struct ltq_uart_port), + GFP_KERNEL); if (!ltq_port) return -ENOMEM; @@ -709,19 +714,26 @@ lqasc_probe(struct platform_device *pdev) port->ops = &lqasc_pops; port->fifosize = 16; port->type = PORT_LTQ_ASC, - port->line = pdev->id; + port->line = line; port->dev = &pdev->dev; - - port->irq = tx_irq; /* unused, just to be backward-compatibe */ + /* unused, just to be backward-compatible */ + port->irq = irqres[0].start; port->mapbase = mmres->start; - ltq_port->clk = clk; + ltq_port->fpiclk = clk_get_fpi(); + if (IS_ERR(ltq_port->fpiclk)) { + pr_err("failed to get fpi clk\n"); + return -ENOENT; + } - ltq_port->tx_irq = tx_irq; - ltq_port->rx_irq = rx_irq; - ltq_port->err_irq = err_irq; + /* not all asc ports have clock gates, lets ignore the return code */ + ltq_port->clk = clk_get(&pdev->dev, NULL); - lqasc_port[pdev->id] = ltq_port; + ltq_port->tx_irq = irqres[0].start; + ltq_port->rx_irq = irqres[1].start; + ltq_port->err_irq = irqres[2].start; + + lqasc_port[line] = ltq_port; platform_set_drvdata(pdev, ltq_port); ret = uart_add_one_port(&lqasc_reg, port); @@ -729,10 +741,17 @@ lqasc_probe(struct platform_device *pdev) return ret; } +static const struct of_device_id ltq_asc_match[] = { + { .compatible = DRVNAME }, + {}, +}; +MODULE_DEVICE_TABLE(of, ltq_asc_match); + static struct platform_driver lqasc_driver = { .driver = { .name = DRVNAME, .owner = THIS_MODULE, + .of_match_table = ltq_asc_match, }, }; diff --git a/drivers/tty/serial/mxs-auart.c b/drivers/tty/serial/mxs-auart.c index ec56d8397aae..2e341b81ff89 100644 --- a/drivers/tty/serial/mxs-auart.c +++ b/drivers/tty/serial/mxs-auart.c @@ -33,6 +33,7 @@ #include <linux/delay.h> #include <linux/io.h> #include <linux/pinctrl/consumer.h> +#include <linux/of_device.h> #include <asm/cacheflush.h> @@ -675,6 +676,30 @@ static struct uart_driver auart_driver = { #endif }; +/* + * This function returns 1 if pdev isn't a device instatiated by dt, 0 if it + * could successfully get all information from dt or a negative errno. + */ +static int serial_mxs_probe_dt(struct mxs_auart_port *s, + struct platform_device *pdev) +{ + struct device_node *np = pdev->dev.of_node; + int ret; + + if (!np) + /* no device tree device */ + return 1; + + ret = of_alias_get_id(np, "serial"); + if (ret < 0) { + dev_err(&pdev->dev, "failed to get alias id: %d\n", ret); + return ret; + } + s->port.line = ret; + + return 0; +} + static int __devinit mxs_auart_probe(struct platform_device *pdev) { struct mxs_auart_port *s; @@ -689,6 +714,12 @@ static int __devinit mxs_auart_probe(struct platform_device *pdev) goto out; } + ret = serial_mxs_probe_dt(s, pdev); + if (ret > 0) + s->port.line = pdev->id < 0 ? 0 : pdev->id; + else if (ret < 0) + goto out_free; + pinctrl = devm_pinctrl_get_select_default(&pdev->dev); if (IS_ERR(pinctrl)) { ret = PTR_ERR(pinctrl); @@ -711,7 +742,6 @@ static int __devinit mxs_auart_probe(struct platform_device *pdev) s->port.membase = ioremap(r->start, resource_size(r)); s->port.ops = &mxs_auart_ops; s->port.iotype = UPIO_MEM; - s->port.line = pdev->id < 0 ? 0 : pdev->id; s->port.fifosize = 16; s->port.uartclk = clk_get_rate(s->clk); s->port.type = PORT_IMX; @@ -728,7 +758,7 @@ static int __devinit mxs_auart_probe(struct platform_device *pdev) platform_set_drvdata(pdev, s); - auart_port[pdev->id] = s; + auart_port[s->port.line] = s; mxs_auart_reset(&s->port); @@ -769,12 +799,19 @@ static int __devexit mxs_auart_remove(struct platform_device *pdev) return 0; } +static struct of_device_id mxs_auart_dt_ids[] = { + { .compatible = "fsl,imx23-auart", }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, mxs_auart_dt_ids); + static struct platform_driver mxs_auart_driver = { .probe = mxs_auart_probe, .remove = __devexit_p(mxs_auart_remove), .driver = { .name = "mxs-auart", .owner = THIS_MODULE, + .of_match_table = mxs_auart_dt_ids, }, }; @@ -807,3 +844,4 @@ module_init(mxs_auart_init); module_exit(mxs_auart_exit); MODULE_LICENSE("GPL"); MODULE_DESCRIPTION("Freescale MXS application uart driver"); +MODULE_ALIAS("platform:mxs-auart"); diff --git a/drivers/tty/serial/sb1250-duart.c b/drivers/tty/serial/sb1250-duart.c index 0be8a2f00d0b..f76b1688c5c8 100644 --- a/drivers/tty/serial/sb1250-duart.c +++ b/drivers/tty/serial/sb1250-duart.c @@ -31,6 +31,7 @@ #include <linux/interrupt.h> #include <linux/ioport.h> #include <linux/kernel.h> +#include <linux/module.h> #include <linux/major.h> #include <linux/serial.h> #include <linux/serial_core.h> diff --git a/drivers/tty/serial/serial_txx9.c b/drivers/tty/serial/serial_txx9.c index 34bd345da775..6ae2a58d62f2 100644 --- a/drivers/tty/serial/serial_txx9.c +++ b/drivers/tty/serial/serial_txx9.c @@ -466,7 +466,7 @@ static void serial_txx9_break_ctl(struct uart_port *port, int break_state) spin_unlock_irqrestore(&up->port.lock, flags); } -#if defined(CONFIG_SERIAL_TXX9_CONSOLE) || (CONFIG_CONSOLE_POLL) +#if defined(CONFIG_SERIAL_TXX9_CONSOLE) || defined(CONFIG_CONSOLE_POLL) /* * Wait for transmitter & holding register to empty */ diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c index 4604153b7954..1bd9163bc118 100644 --- a/drivers/tty/serial/sh-sci.c +++ b/drivers/tty/serial/sh-sci.c @@ -2179,6 +2179,16 @@ static int __devinit sci_init_single(struct platform_device *dev, return 0; } +static void sci_cleanup_single(struct sci_port *port) +{ + sci_free_gpios(port); + + clk_put(port->iclk); + clk_put(port->fclk); + + pm_runtime_disable(port->port.dev); +} + #ifdef CONFIG_SERIAL_SH_SCI_CONSOLE static void serial_console_putchar(struct uart_port *port, int ch) { @@ -2360,14 +2370,10 @@ static int sci_remove(struct platform_device *dev) cpufreq_unregister_notifier(&port->freq_transition, CPUFREQ_TRANSITION_NOTIFIER); - sci_free_gpios(port); - uart_remove_one_port(&sci_uart_driver, &port->port); - clk_put(port->iclk); - clk_put(port->fclk); + sci_cleanup_single(port); - pm_runtime_disable(&dev->dev); return 0; } @@ -2385,14 +2391,20 @@ static int __devinit sci_probe_single(struct platform_device *dev, index+1, SCI_NPORTS); dev_notice(&dev->dev, "Consider bumping " "CONFIG_SERIAL_SH_SCI_NR_UARTS!\n"); - return 0; + return -EINVAL; } ret = sci_init_single(dev, sciport, index, p); if (ret) return ret; - return uart_add_one_port(&sci_uart_driver, &sciport->port); + ret = uart_add_one_port(&sci_uart_driver, &sciport->port); + if (ret) { + sci_cleanup_single(sciport); + return ret; + } + + return 0; } static int __devinit sci_probe(struct platform_device *dev) @@ -2413,24 +2425,22 @@ static int __devinit sci_probe(struct platform_device *dev) ret = sci_probe_single(dev, dev->id, p, sp); if (ret) - goto err_unreg; + return ret; sp->freq_transition.notifier_call = sci_notifier; ret = cpufreq_register_notifier(&sp->freq_transition, CPUFREQ_TRANSITION_NOTIFIER); - if (unlikely(ret < 0)) - goto err_unreg; + if (unlikely(ret < 0)) { + sci_cleanup_single(sp); + return ret; + } #ifdef CONFIG_SH_STANDARD_BIOS sh_bios_gdb_detach(); #endif return 0; - -err_unreg: - sci_remove(dev); - return ret; } static int sci_suspend(struct device *dev) diff --git a/drivers/tty/serial/zs.c b/drivers/tty/serial/zs.c index 4001eee6c08d..92c00b24d0df 100644 --- a/drivers/tty/serial/zs.c +++ b/drivers/tty/serial/zs.c @@ -57,6 +57,7 @@ #include <linux/ioport.h> #include <linux/irqflags.h> #include <linux/kernel.h> +#include <linux/module.h> #include <linux/major.h> #include <linux/serial.h> #include <linux/serial_core.h> diff --git a/drivers/tty/synclink.c b/drivers/tty/synclink.c index 5ed0daae6564..593d40ad0a6b 100644 --- a/drivers/tty/synclink.c +++ b/drivers/tty/synclink.c @@ -3338,9 +3338,9 @@ static int block_til_ready(struct tty_struct *tty, struct file * filp, printk("%s(%d):block_til_ready blocking on %s count=%d\n", __FILE__,__LINE__, tty->driver->name, port->count ); - tty_unlock(tty); + tty_unlock(); schedule(); - tty_lock(tty); + tty_lock(); } set_current_state(TASK_RUNNING); diff --git a/drivers/tty/synclink_gt.c b/drivers/tty/synclink_gt.c index 45b43f11ca39..aa1debf97cc7 100644 --- a/drivers/tty/synclink_gt.c +++ b/drivers/tty/synclink_gt.c @@ -3336,9 +3336,9 @@ static int block_til_ready(struct tty_struct *tty, struct file *filp, } DBGINFO(("%s block_til_ready wait\n", tty->driver->name)); - tty_unlock(tty); + tty_unlock(); schedule(); - tty_lock(tty); + tty_lock(); } set_current_state(TASK_RUNNING); diff --git a/drivers/tty/synclinkmp.c b/drivers/tty/synclinkmp.c index 4a1e4f07765b..a3dddc12d2fe 100644 --- a/drivers/tty/synclinkmp.c +++ b/drivers/tty/synclinkmp.c @@ -3357,9 +3357,9 @@ static int block_til_ready(struct tty_struct *tty, struct file *filp, printk("%s(%d):%s block_til_ready() count=%d\n", __FILE__,__LINE__, tty->driver->name, port->count ); - tty_unlock(tty); + tty_unlock(); schedule(); - tty_lock(tty); + tty_lock(); } set_current_state(TASK_RUNNING); diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c index 9e930c009bf2..b425c79675ad 100644 --- a/drivers/tty/tty_io.c +++ b/drivers/tty/tty_io.c @@ -185,7 +185,6 @@ void free_tty_struct(struct tty_struct *tty) put_device(tty->dev); kfree(tty->write_buf); tty_buffer_free_all(tty); - tty->magic = 0xDEADDEAD; kfree(tty); } @@ -574,7 +573,7 @@ void __tty_hangup(struct tty_struct *tty) } spin_unlock(&redirect_lock); - tty_lock(tty); + tty_lock(); /* some functions below drop BTM, so we need this bit */ set_bit(TTY_HUPPING, &tty->flags); @@ -667,7 +666,7 @@ void __tty_hangup(struct tty_struct *tty) clear_bit(TTY_HUPPING, &tty->flags); tty_ldisc_enable(tty); - tty_unlock(tty); + tty_unlock(); if (f) fput(f); @@ -1104,12 +1103,12 @@ void tty_write_message(struct tty_struct *tty, char *msg) { if (tty) { mutex_lock(&tty->atomic_write_lock); - tty_lock(tty); + tty_lock(); if (tty->ops->write && !test_bit(TTY_CLOSING, &tty->flags)) { - tty_unlock(tty); + tty_unlock(); tty->ops->write(tty, msg, strlen(msg)); } else - tty_unlock(tty); + tty_unlock(); tty_write_unlock(tty); } return; @@ -1404,7 +1403,6 @@ struct tty_struct *tty_init_dev(struct tty_driver *driver, int idx) } initialize_tty_struct(tty, driver, idx); - tty_lock(tty); retval = tty_driver_install_tty(driver, tty); if (retval < 0) goto err_deinit_tty; @@ -1417,11 +1415,9 @@ struct tty_struct *tty_init_dev(struct tty_driver *driver, int idx) retval = tty_ldisc_setup(tty, tty->link); if (retval) goto err_release_tty; - /* Return the tty locked so that it cannot vanish under the caller */ return tty; err_deinit_tty: - tty_unlock(tty); deinitialize_tty_struct(tty); free_tty_struct(tty); err_module_put: @@ -1430,7 +1426,6 @@ err_module_put: /* call the tty release_tty routine to clean out this slot */ err_release_tty: - tty_unlock(tty); printk_ratelimited(KERN_INFO "tty_init_dev: ldisc open failed, " "clearing slot %d\n", idx); release_tty(tty, idx); @@ -1633,7 +1628,7 @@ int tty_release(struct inode *inode, struct file *filp) if (tty_paranoia_check(tty, inode, __func__)) return 0; - tty_lock(tty); + tty_lock(); check_tty_count(tty, __func__); __tty_fasync(-1, filp, 0); @@ -1642,11 +1637,10 @@ int tty_release(struct inode *inode, struct file *filp) pty_master = (tty->driver->type == TTY_DRIVER_TYPE_PTY && tty->driver->subtype == PTY_TYPE_MASTER); devpts = (tty->driver->flags & TTY_DRIVER_DEVPTS_MEM) != 0; - /* Review: parallel close */ o_tty = tty->link; if (tty_release_checks(tty, o_tty, idx)) { - tty_unlock(tty); + tty_unlock(); return 0; } @@ -1658,7 +1652,7 @@ int tty_release(struct inode *inode, struct file *filp) if (tty->ops->close) tty->ops->close(tty, filp); - tty_unlock(tty); + tty_unlock(); /* * Sanity check: if tty->count is going to zero, there shouldn't be * any waiters on tty->read_wait or tty->write_wait. We test the @@ -1681,7 +1675,7 @@ int tty_release(struct inode *inode, struct file *filp) opens on /dev/tty */ mutex_lock(&tty_mutex); - tty_lock_pair(tty, o_tty); + tty_lock(); tty_closing = tty->count <= 1; o_tty_closing = o_tty && (o_tty->count <= (pty_master ? 1 : 0)); @@ -1712,7 +1706,7 @@ int tty_release(struct inode *inode, struct file *filp) printk(KERN_WARNING "%s: %s: read/write wait queue active!\n", __func__, tty_name(tty, buf)); - tty_unlock_pair(tty, o_tty); + tty_unlock(); mutex_unlock(&tty_mutex); schedule(); } @@ -1775,7 +1769,7 @@ int tty_release(struct inode *inode, struct file *filp) /* check whether both sides are closing ... */ if (!tty_closing || (o_tty && !o_tty_closing)) { - tty_unlock_pair(tty, o_tty); + tty_unlock(); return 0; } @@ -1788,16 +1782,14 @@ int tty_release(struct inode *inode, struct file *filp) tty_ldisc_release(tty, o_tty); /* * The release_tty function takes care of the details of clearing - * the slots and preserving the termios structure. The tty_unlock_pair - * should be safe as we keep a kref while the tty is locked (so the - * unlock never unlocks a freed tty). + * the slots and preserving the termios structure. */ release_tty(tty, idx); - tty_unlock_pair(tty, o_tty); /* Make this pty number available for reallocation */ if (devpts) devpts_kill_index(inode, idx); + tty_unlock(); return 0; } @@ -1901,9 +1893,6 @@ static struct tty_driver *tty_lookup_driver(dev_t device, struct file *filp, * Locking: tty_mutex protects tty, tty_lookup_driver and tty_init_dev. * tty->count should protect the rest. * ->siglock protects ->signal/->sighand - * - * Note: the tty_unlock/lock cases without a ref are only safe due to - * tty_mutex */ static int tty_open(struct inode *inode, struct file *filp) @@ -1927,7 +1916,8 @@ retry_open: retval = 0; mutex_lock(&tty_mutex); - /* This is protected by the tty_mutex */ + tty_lock(); + tty = tty_open_current_tty(device, filp); if (IS_ERR(tty)) { retval = PTR_ERR(tty); @@ -1948,19 +1938,17 @@ retry_open: } if (tty) { - tty_lock(tty); retval = tty_reopen(tty); - if (retval < 0) { - tty_unlock(tty); + if (retval) tty = ERR_PTR(retval); - } - } else /* Returns with the tty_lock held for now */ + } else tty = tty_init_dev(driver, index); mutex_unlock(&tty_mutex); if (driver) tty_driver_kref_put(driver); if (IS_ERR(tty)) { + tty_unlock(); retval = PTR_ERR(tty); goto err_file; } @@ -1989,7 +1977,7 @@ retry_open: printk(KERN_DEBUG "%s: error %d in opening %s...\n", __func__, retval, tty->name); #endif - tty_unlock(tty); /* need to call tty_release without BTM */ + tty_unlock(); /* need to call tty_release without BTM */ tty_release(inode, filp); if (retval != -ERESTARTSYS) return retval; @@ -2001,15 +1989,17 @@ retry_open: /* * Need to reset f_op in case a hangup happened. */ + tty_lock(); if (filp->f_op == &hung_up_tty_fops) filp->f_op = &tty_fops; + tty_unlock(); goto retry_open; } - tty_unlock(tty); + tty_unlock(); mutex_lock(&tty_mutex); - tty_lock(tty); + tty_lock(); spin_lock_irq(¤t->sighand->siglock); if (!noctty && current->signal->leader && @@ -2017,10 +2007,11 @@ retry_open: tty->session == NULL) __proc_set_tty(current, tty); spin_unlock_irq(¤t->sighand->siglock); - tty_unlock(tty); + tty_unlock(); mutex_unlock(&tty_mutex); return 0; err_unlock: + tty_unlock(); mutex_unlock(&tty_mutex); /* after locks to avoid deadlock */ if (!IS_ERR_OR_NULL(driver)) @@ -2103,13 +2094,10 @@ out: static int tty_fasync(int fd, struct file *filp, int on) { - struct tty_struct *tty = file_tty(filp); int retval; - - tty_lock(tty); + tty_lock(); retval = __tty_fasync(fd, filp, on); - tty_unlock(tty); - + tty_unlock(); return retval; } @@ -2946,7 +2934,6 @@ void initialize_tty_struct(struct tty_struct *tty, tty->pgrp = NULL; tty->overrun_time = jiffies; tty_buffer_init(tty); - mutex_init(&tty->legacy_mutex); mutex_init(&tty->termios_mutex); mutex_init(&tty->ldisc_mutex); init_waitqueue_head(&tty->write_wait); diff --git a/drivers/tty/tty_ldisc.c b/drivers/tty/tty_ldisc.c index ba8be396a621..9911eb6b34cd 100644 --- a/drivers/tty/tty_ldisc.c +++ b/drivers/tty/tty_ldisc.c @@ -568,7 +568,7 @@ int tty_set_ldisc(struct tty_struct *tty, int ldisc) if (IS_ERR(new_ldisc)) return PTR_ERR(new_ldisc); - tty_lock(tty); + tty_lock(); /* * We need to look at the tty locking here for pty/tty pairs * when both sides try to change in parallel. @@ -582,12 +582,12 @@ int tty_set_ldisc(struct tty_struct *tty, int ldisc) */ if (tty->ldisc->ops->num == ldisc) { - tty_unlock(tty); + tty_unlock(); tty_ldisc_put(new_ldisc); return 0; } - tty_unlock(tty); + tty_unlock(); /* * Problem: What do we do if this blocks ? * We could deadlock here @@ -595,7 +595,7 @@ int tty_set_ldisc(struct tty_struct *tty, int ldisc) tty_wait_until_sent(tty, 0); - tty_lock(tty); + tty_lock(); mutex_lock(&tty->ldisc_mutex); /* @@ -605,10 +605,10 @@ int tty_set_ldisc(struct tty_struct *tty, int ldisc) while (test_bit(TTY_LDISC_CHANGING, &tty->flags)) { mutex_unlock(&tty->ldisc_mutex); - tty_unlock(tty); + tty_unlock(); wait_event(tty_ldisc_wait, test_bit(TTY_LDISC_CHANGING, &tty->flags) == 0); - tty_lock(tty); + tty_lock(); mutex_lock(&tty->ldisc_mutex); } @@ -623,7 +623,7 @@ int tty_set_ldisc(struct tty_struct *tty, int ldisc) o_ldisc = tty->ldisc; - tty_unlock(tty); + tty_unlock(); /* * Make sure we don't change while someone holds a * reference to the line discipline. The TTY_LDISC bit @@ -650,7 +650,7 @@ int tty_set_ldisc(struct tty_struct *tty, int ldisc) retval = tty_ldisc_wait_idle(tty, 5 * HZ); - tty_lock(tty); + tty_lock(); mutex_lock(&tty->ldisc_mutex); /* handle wait idle failure locked */ @@ -665,7 +665,7 @@ int tty_set_ldisc(struct tty_struct *tty, int ldisc) clear_bit(TTY_LDISC_CHANGING, &tty->flags); mutex_unlock(&tty->ldisc_mutex); tty_ldisc_put(new_ldisc); - tty_unlock(tty); + tty_unlock(); return -EIO; } @@ -708,7 +708,7 @@ enable: if (o_work) schedule_work(&o_tty->buf.work); mutex_unlock(&tty->ldisc_mutex); - tty_unlock(tty); + tty_unlock(); return retval; } @@ -816,11 +816,11 @@ void tty_ldisc_hangup(struct tty_struct *tty) * need to wait for another function taking the BTM */ clear_bit(TTY_LDISC, &tty->flags); - tty_unlock(tty); + tty_unlock(); cancel_work_sync(&tty->buf.work); mutex_unlock(&tty->ldisc_mutex); retry: - tty_lock(tty); + tty_lock(); mutex_lock(&tty->ldisc_mutex); /* At this point we have a closed ldisc and we want to @@ -831,7 +831,7 @@ retry: if (atomic_read(&tty->ldisc->users) != 1) { char cur_n[TASK_COMM_LEN], tty_n[64]; long timeout = 3 * HZ; - tty_unlock(tty); + tty_unlock(); while (tty_ldisc_wait_idle(tty, timeout) == -EBUSY) { timeout = MAX_SCHEDULE_TIMEOUT; @@ -894,23 +894,6 @@ int tty_ldisc_setup(struct tty_struct *tty, struct tty_struct *o_tty) tty_ldisc_enable(tty); return 0; } - -static void tty_ldisc_kill(struct tty_struct *tty) -{ - mutex_lock(&tty->ldisc_mutex); - /* - * Now kill off the ldisc - */ - tty_ldisc_close(tty, tty->ldisc); - tty_ldisc_put(tty->ldisc); - /* Force an oops if we mess this up */ - tty->ldisc = NULL; - - /* Ensure the next open requests the N_TTY ldisc */ - tty_set_termios_ldisc(tty, N_TTY); - mutex_unlock(&tty->ldisc_mutex); -} - /** * tty_ldisc_release - release line discipline * @tty: tty being shut down @@ -929,19 +912,27 @@ void tty_ldisc_release(struct tty_struct *tty, struct tty_struct *o_tty) * race with the set_ldisc code path. */ - tty_unlock_pair(tty, o_tty); + tty_unlock(); tty_ldisc_halt(tty); tty_ldisc_flush_works(tty); - if (o_tty) { - tty_ldisc_halt(o_tty); - tty_ldisc_flush_works(o_tty); - } - tty_lock_pair(tty, o_tty); + tty_lock(); + mutex_lock(&tty->ldisc_mutex); + /* + * Now kill off the ldisc + */ + tty_ldisc_close(tty, tty->ldisc); + tty_ldisc_put(tty->ldisc); + /* Force an oops if we mess this up */ + tty->ldisc = NULL; + + /* Ensure the next open requests the N_TTY ldisc */ + tty_set_termios_ldisc(tty, N_TTY); + mutex_unlock(&tty->ldisc_mutex); - tty_ldisc_kill(tty); + /* This will need doing differently if we need to lock */ if (o_tty) - tty_ldisc_kill(o_tty); + tty_ldisc_release(o_tty, NULL); /* And the memory resources remaining (buffers, termios) will be disposed of when the kref hits zero */ diff --git a/drivers/tty/tty_mutex.c b/drivers/tty/tty_mutex.c index 69adc80c98cd..9ff986c32a21 100644 --- a/drivers/tty/tty_mutex.c +++ b/drivers/tty/tty_mutex.c @@ -4,59 +4,29 @@ #include <linux/semaphore.h> #include <linux/sched.h> -/* Legacy tty mutex glue */ +/* + * The 'big tty mutex' + * + * This mutex is taken and released by tty_lock() and tty_unlock(), + * replacing the older big kernel lock. + * It can no longer be taken recursively, and does not get + * released implicitly while sleeping. + * + * Don't use in new code. + */ +static DEFINE_MUTEX(big_tty_mutex); /* * Getting the big tty mutex. */ - -void __lockfunc tty_lock(struct tty_struct *tty) +void __lockfunc tty_lock(void) { - if (tty->magic != TTY_MAGIC) { - printk(KERN_ERR "L Bad %p\n", tty); - WARN_ON(1); - return; - } - tty_kref_get(tty); - mutex_lock(&tty->legacy_mutex); + mutex_lock(&big_tty_mutex); } EXPORT_SYMBOL(tty_lock); -void __lockfunc tty_unlock(struct tty_struct *tty) +void __lockfunc tty_unlock(void) { - if (tty->magic != TTY_MAGIC) { - printk(KERN_ERR "U Bad %p\n", tty); - WARN_ON(1); - return; - } - mutex_unlock(&tty->legacy_mutex); - tty_kref_put(tty); + mutex_unlock(&big_tty_mutex); } EXPORT_SYMBOL(tty_unlock); - -/* - * Getting the big tty mutex for a pair of ttys with lock ordering - * On a non pty/tty pair tty2 can be NULL which is just fine. - */ -void __lockfunc tty_lock_pair(struct tty_struct *tty, - struct tty_struct *tty2) -{ - if (tty < tty2) { - tty_lock(tty); - tty_lock(tty2); - } else { - if (tty2 && tty2 != tty) - tty_lock(tty2); - tty_lock(tty); - } -} -EXPORT_SYMBOL(tty_lock_pair); - -void __lockfunc tty_unlock_pair(struct tty_struct *tty, - struct tty_struct *tty2) -{ - tty_unlock(tty); - if (tty2 && tty2 != tty) - tty_unlock(tty2); -} -EXPORT_SYMBOL(tty_unlock_pair); diff --git a/drivers/tty/tty_port.c b/drivers/tty/tty_port.c index d9cca95a5452..bf6e238146ae 100644 --- a/drivers/tty/tty_port.c +++ b/drivers/tty/tty_port.c @@ -230,7 +230,7 @@ int tty_port_block_til_ready(struct tty_port *port, /* block if port is in the process of being closed */ if (tty_hung_up_p(filp) || port->flags & ASYNC_CLOSING) { - wait_event_interruptible_tty(tty, port->close_wait, + wait_event_interruptible_tty(port->close_wait, !(port->flags & ASYNC_CLOSING)); if (port->flags & ASYNC_HUP_NOTIFY) return -EAGAIN; @@ -296,9 +296,9 @@ int tty_port_block_til_ready(struct tty_port *port, retval = -ERESTARTSYS; break; } - tty_unlock(tty); + tty_unlock(); schedule(); - tty_lock(tty); + tty_lock(); } finish_wait(&port->open_wait, &wait); |