diff options
Diffstat (limited to 'drivers/tty')
45 files changed, 2887 insertions, 1696 deletions
diff --git a/drivers/tty/n_hdlc.c b/drivers/tty/n_hdlc.c index cea56033b34c..a09ce3ef5d74 100644 --- a/drivers/tty/n_hdlc.c +++ b/drivers/tty/n_hdlc.c @@ -417,7 +417,7 @@ static void n_hdlc_send_frames(struct n_hdlc *n_hdlc, struct tty_struct *tty) __FILE__,__LINE__,tbuf,tbuf->count); /* Send the next block of data to device */ - tty->flags |= (1 << TTY_DO_WRITE_WAKEUP); + set_bit(TTY_DO_WRITE_WAKEUP, &tty->flags); actual = tty->ops->write(tty, tbuf->buf, tbuf->count); /* rollback was possible and has been done */ @@ -459,7 +459,7 @@ static void n_hdlc_send_frames(struct n_hdlc *n_hdlc, struct tty_struct *tty) } if (!tbuf) - tty->flags &= ~(1 << TTY_DO_WRITE_WAKEUP); + clear_bit(TTY_DO_WRITE_WAKEUP, &tty->flags); /* Clear the re-entry flag */ spin_lock_irqsave(&n_hdlc->tx_buf_list.spinlock, flags); @@ -491,7 +491,7 @@ static void n_hdlc_tty_wakeup(struct tty_struct *tty) return; if (tty != n_hdlc->tty) { - tty->flags &= ~(1 << TTY_DO_WRITE_WAKEUP); + clear_bit(TTY_DO_WRITE_WAKEUP, &tty->flags); return; } diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c index 39d6ab6551e0..d2256d08ee7e 100644 --- a/drivers/tty/n_tty.c +++ b/drivers/tty/n_tty.c @@ -61,7 +61,7 @@ * controlling the space in the read buffer. */ #define TTY_THRESHOLD_THROTTLE 128 /* now based on remaining room */ -#define TTY_THRESHOLD_UNTHROTTLE 128 +#define TTY_THRESHOLD_UNTHROTTLE 128 /* * Special byte codes used in the echo buffer to represent operations @@ -405,7 +405,7 @@ static ssize_t process_output_block(struct tty_struct *tty, const unsigned char *buf, unsigned int nr) { int space; - int i; + int i; const unsigned char *cp; mutex_lock(&tty->output_lock); @@ -1607,7 +1607,7 @@ static inline int input_available_p(struct tty_struct *tty, int amt) } /** - * copy_from_read_buf - copy read data directly + * copy_from_read_buf - copy read data directly * @tty: terminal device * @b: user data * @nr: size of data @@ -1909,7 +1909,7 @@ do_it_again: if (nr) clear_bit(TTY_PUSH, &tty->flags); } else if (test_and_clear_bit(TTY_PUSH, &tty->flags)) - goto do_it_again; + goto do_it_again; n_tty_set_room(tty); return retval; diff --git a/drivers/tty/pty.c b/drivers/tty/pty.c index e18604b3fc7d..d8653ab6f498 100644 --- a/drivers/tty/pty.c +++ b/drivers/tty/pty.c @@ -446,19 +446,8 @@ static inline void legacy_pty_init(void) { } int pty_limit = NR_UNIX98_PTY_DEFAULT; static int pty_limit_min; static int pty_limit_max = NR_UNIX98_PTY_MAX; -static int tty_count; static int pty_count; -static inline void pty_inc_count(void) -{ - pty_count = (++tty_count) / 2; -} - -static inline void pty_dec_count(void) -{ - pty_count = (--tty_count) / 2; -} - static struct cdev ptmx_cdev; static struct ctl_table pty_table[] = { @@ -600,8 +589,7 @@ static int pty_unix98_install(struct tty_driver *driver, struct tty_struct *tty) */ tty_driver_kref_get(driver); tty->count++; - pty_inc_count(); /* tty */ - pty_inc_count(); /* tty->link */ + pty_count++; return 0; err_free_mem: deinitialize_tty_struct(o_tty); @@ -613,15 +601,19 @@ err_free_tty: return -ENOMEM; } -static void pty_unix98_remove(struct tty_driver *driver, struct tty_struct *tty) +static void ptm_unix98_remove(struct tty_driver *driver, struct tty_struct *tty) +{ + pty_count--; +} + +static void pts_unix98_remove(struct tty_driver *driver, struct tty_struct *tty) { - pty_dec_count(); } static const struct tty_operations ptm_unix98_ops = { .lookup = ptm_unix98_lookup, .install = pty_unix98_install, - .remove = pty_unix98_remove, + .remove = ptm_unix98_remove, .open = pty_open, .close = pty_close, .write = pty_write, @@ -638,7 +630,7 @@ static const struct tty_operations ptm_unix98_ops = { static const struct tty_operations pty_unix98_ops = { .lookup = pts_unix98_lookup, .install = pty_unix98_install, - .remove = pty_unix98_remove, + .remove = pts_unix98_remove, .open = pty_open, .close = pty_close, .write = pty_write, diff --git a/drivers/tty/serial/8250.c b/drivers/tty/serial/8250.c index eeadf1b8e093..9f50c4e3c2be 100644 --- a/drivers/tty/serial/8250.c +++ b/drivers/tty/serial/8250.c @@ -129,32 +129,6 @@ static unsigned long probe_rsa[PORT_RSA_MAX]; static unsigned int probe_rsa_count; #endif /* CONFIG_SERIAL_8250_RSA */ -struct uart_8250_port { - struct uart_port port; - struct timer_list timer; /* "no irq" timer */ - struct list_head list; /* ports on this IRQ */ - unsigned short capabilities; /* port capabilities */ - unsigned short bugs; /* port bugs */ - unsigned int tx_loadsz; /* transmit fifo load size */ - unsigned char acr; - unsigned char ier; - unsigned char lcr; - unsigned char mcr; - unsigned char mcr_mask; /* mask of user bits */ - unsigned char mcr_force; /* mask of forced bits */ - unsigned char cur_iotype; /* Running I/O type */ - - /* - * Some bits in registers are cleared on a read, so they must - * be saved whenever the register is read but the bits will not - * be immediately processed. - */ -#define LSR_SAVE_FLAGS UART_LSR_BRK_ERROR_BITS - unsigned char lsr_saved_flags; -#define MSR_SAVE_FLAGS UART_MSR_ANY_DELTA - unsigned char msr_saved_flags; -}; - struct irq_info { struct hlist_node node; int irq; @@ -1326,8 +1300,6 @@ static void serial8250_stop_tx(struct uart_port *port) } } -static void transmit_chars(struct uart_8250_port *up); - static void serial8250_start_tx(struct uart_port *port) { struct uart_8250_port *up = @@ -1344,7 +1316,7 @@ static void serial8250_start_tx(struct uart_port *port) if ((up->port.type == PORT_RM9000) ? (lsr & UART_LSR_THRE) : (lsr & UART_LSR_TEMT)) - transmit_chars(up); + serial8250_tx_chars(up); } } @@ -1401,11 +1373,16 @@ static void clear_rx_fifo(struct uart_8250_port *up) } while (1); } -static void -receive_chars(struct uart_8250_port *up, unsigned int *status) +/* + * serial8250_rx_chars: processes according to the passed in LSR + * value, and returns the remaining LSR bits not handled + * by this Rx routine. + */ +unsigned char +serial8250_rx_chars(struct uart_8250_port *up, unsigned char lsr) { struct tty_struct *tty = up->port.state->port.tty; - unsigned char ch, lsr = *status; + unsigned char ch; int max_count = 256; char flag; @@ -1481,10 +1458,11 @@ ignore_char: spin_unlock(&up->port.lock); tty_flip_buffer_push(tty); spin_lock(&up->port.lock); - *status = lsr; + return lsr; } +EXPORT_SYMBOL_GPL(serial8250_rx_chars); -static void transmit_chars(struct uart_8250_port *up) +void serial8250_tx_chars(struct uart_8250_port *up) { struct circ_buf *xmit = &up->port.state->xmit; int count; @@ -1521,8 +1499,9 @@ static void transmit_chars(struct uart_8250_port *up) if (uart_circ_empty(xmit)) __stop_tx(up); } +EXPORT_SYMBOL_GPL(serial8250_tx_chars); -static unsigned int check_modem_status(struct uart_8250_port *up) +unsigned int serial8250_modem_status(struct uart_8250_port *up) { unsigned int status = serial_in(up, UART_MSR); @@ -1544,14 +1523,20 @@ static unsigned int check_modem_status(struct uart_8250_port *up) return status; } +EXPORT_SYMBOL_GPL(serial8250_modem_status); /* * This handles the interrupt from one port. */ -static void serial8250_handle_port(struct uart_8250_port *up) +int serial8250_handle_irq(struct uart_port *port, unsigned int iir) { - unsigned int status; + unsigned char status; unsigned long flags; + struct uart_8250_port *up = + container_of(port, struct uart_8250_port, port); + + if (iir & UART_IIR_NO_INT) + return 0; spin_lock_irqsave(&up->port.lock, flags); @@ -1560,25 +1545,13 @@ static void serial8250_handle_port(struct uart_8250_port *up) DEBUG_INTR("status = %x...", status); if (status & (UART_LSR_DR | UART_LSR_BI)) - receive_chars(up, &status); - check_modem_status(up); + status = serial8250_rx_chars(up, status); + serial8250_modem_status(up); if (status & UART_LSR_THRE) - transmit_chars(up); + serial8250_tx_chars(up); spin_unlock_irqrestore(&up->port.lock, flags); -} - -int serial8250_handle_irq(struct uart_port *port, unsigned int iir) -{ - struct uart_8250_port *up = - container_of(port, struct uart_8250_port, port); - - if (!(iir & UART_IIR_NO_INT)) { - serial8250_handle_port(up); - return 1; - } - - return 0; + return 1; } EXPORT_SYMBOL_GPL(serial8250_handle_irq); @@ -1619,11 +1592,13 @@ static irqreturn_t serial8250_interrupt(int irq, void *dev_id) do { struct uart_8250_port *up; struct uart_port *port; + bool skip; up = list_entry(l, struct uart_8250_port, list); port = &up->port; + skip = pass_counter && up->port.flags & UPF_IIR_ONCE; - if (port->handle_irq(port)) { + if (!skip && port->handle_irq(port)) { handled = 1; end = NULL; } else if (end == NULL) @@ -1758,11 +1733,8 @@ static void serial_unlink_irq_chain(struct uart_8250_port *up) static void serial8250_timeout(unsigned long data) { struct uart_8250_port *up = (struct uart_8250_port *)data; - unsigned int iir; - iir = serial_in(up, UART_IIR); - if (!(iir & UART_IIR_NO_INT)) - serial8250_handle_port(up); + up->port.handle_irq(&up->port); mod_timer(&up->timer, jiffies + uart_poll_timeout(&up->port)); } @@ -1801,7 +1773,7 @@ static void serial8250_backup_timeout(unsigned long data) } if (!(iir & UART_IIR_NO_INT)) - transmit_chars(up); + serial8250_tx_chars(up); if (is_real_interrupt(up->port.irq)) serial_out(up, UART_IER, ier); @@ -1835,7 +1807,7 @@ static unsigned int serial8250_get_mctrl(struct uart_port *port) unsigned int status; unsigned int ret; - status = check_modem_status(up); + status = serial8250_modem_status(up); ret = 0; if (status & UART_MSR_DCD) @@ -2000,7 +1972,7 @@ static int serial8250_startup(struct uart_port *port) serial_outp(up, UART_IER, 0); serial_outp(up, UART_LCR, 0); serial_icr_write(up, UART_CSR, 0); /* Reset the UART */ - serial_outp(up, UART_LCR, 0xBF); + serial_outp(up, UART_LCR, UART_LCR_CONF_MODE_B); serial_outp(up, UART_EFR, UART_EFR_ECB); serial_outp(up, UART_LCR, 0); } @@ -2848,7 +2820,7 @@ serial8250_console_write(struct console *co, const char *s, unsigned int count) local_irq_save(flags); if (up->port.sysrq) { - /* serial8250_handle_port() already took the lock */ + /* serial8250_handle_irq() already took the lock */ locked = 0; } else if (oops_in_progress) { locked = spin_trylock(&up->port.lock); @@ -2882,7 +2854,7 @@ serial8250_console_write(struct console *co, const char *s, unsigned int count) * while processing with interrupts off. */ if (up->msr_saved_flags) - check_modem_status(up); + serial8250_modem_status(up); if (locked) spin_unlock(&up->port.lock); diff --git a/drivers/tty/serial/8250.h b/drivers/tty/serial/8250.h index 6edf4a6a22d4..ae027be57e25 100644 --- a/drivers/tty/serial/8250.h +++ b/drivers/tty/serial/8250.h @@ -13,6 +13,32 @@ #include <linux/serial_8250.h> +struct uart_8250_port { + struct uart_port port; + struct timer_list timer; /* "no irq" timer */ + struct list_head list; /* ports on this IRQ */ + unsigned short capabilities; /* port capabilities */ + unsigned short bugs; /* port bugs */ + unsigned int tx_loadsz; /* transmit fifo load size */ + unsigned char acr; + unsigned char ier; + unsigned char lcr; + unsigned char mcr; + unsigned char mcr_mask; /* mask of user bits */ + unsigned char mcr_force; /* mask of forced bits */ + unsigned char cur_iotype; /* Running I/O type */ + + /* + * Some bits in registers are cleared on a read, so they must + * be saved whenever the register is read but the bits will not + * be immediately processed. + */ +#define LSR_SAVE_FLAGS UART_LSR_BRK_ERROR_BITS + unsigned char lsr_saved_flags; +#define MSR_SAVE_FLAGS UART_MSR_ANY_DELTA + unsigned char msr_saved_flags; +}; + struct old_serial_port { unsigned int uart; unsigned int baud_base; diff --git a/drivers/tty/serial/8250_dw.c b/drivers/tty/serial/8250_dw.c index bf1fba640c2d..f574eef3075f 100644 --- a/drivers/tty/serial/8250_dw.c +++ b/drivers/tty/serial/8250_dw.c @@ -177,17 +177,7 @@ static struct platform_driver dw8250_platform_driver = { .remove = __devexit_p(dw8250_remove), }; -static int __init dw8250_init(void) -{ - return platform_driver_register(&dw8250_platform_driver); -} -module_init(dw8250_init); - -static void __exit dw8250_exit(void) -{ - platform_driver_unregister(&dw8250_platform_driver); -} -module_exit(dw8250_exit); +module_platform_driver(dw8250_platform_driver); MODULE_AUTHOR("Jamie Iles"); MODULE_LICENSE("GPL"); diff --git a/drivers/tty/serial/8250_fsl.c b/drivers/tty/serial/8250_fsl.c new file mode 100644 index 000000000000..f4d3c47b88e8 --- /dev/null +++ b/drivers/tty/serial/8250_fsl.c @@ -0,0 +1,63 @@ +#include <linux/serial_reg.h> +#include <linux/serial_8250.h> + +#include "8250.h" + +/* + * Freescale 16550 UART "driver", Copyright (C) 2011 Paul Gortmaker. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This isn't a full driver; it just provides an alternate IRQ + * handler to deal with an errata. Everything else is just + * using the bog standard 8250 support. + * + * We follow code flow of serial8250_default_handle_irq() but add + * a check for a break and insert a dummy read on the Rx for the + * immediately following IRQ event. + * + * We re-use the already existing "bug handling" lsr_saved_flags + * field to carry the "what we just did" information from the one + * IRQ event to the next one. + */ + +int fsl8250_handle_irq(struct uart_port *port) +{ + unsigned char lsr, orig_lsr; + unsigned long flags; + unsigned int iir; + struct uart_8250_port *up = + container_of(port, struct uart_8250_port, port); + + spin_lock_irqsave(&up->port.lock, flags); + + iir = port->serial_in(port, UART_IIR); + if (iir & UART_IIR_NO_INT) { + spin_unlock_irqrestore(&up->port.lock, flags); + return 0; + } + + /* This is the WAR; if last event was BRK, then read and return */ + if (unlikely(up->lsr_saved_flags & UART_LSR_BI)) { + up->lsr_saved_flags &= ~UART_LSR_BI; + port->serial_in(port, UART_RX); + spin_unlock_irqrestore(&up->port.lock, flags); + return 1; + } + + lsr = orig_lsr = up->port.serial_in(&up->port, UART_LSR); + + if (lsr & (UART_LSR_DR | UART_LSR_BI)) + lsr = serial8250_rx_chars(up, lsr); + + serial8250_modem_status(up); + + if (lsr & UART_LSR_THRE) + serial8250_tx_chars(up); + + up->lsr_saved_flags = orig_lsr; + spin_unlock_irqrestore(&up->port.lock, flags); + return 1; +} diff --git a/drivers/tty/serial/8250_pci.c b/drivers/tty/serial/8250_pci.c index 825937a5f210..da2b0b0a183f 100644 --- a/drivers/tty/serial/8250_pci.c +++ b/drivers/tty/serial/8250_pci.c @@ -1092,6 +1092,14 @@ static int skip_tx_en_setup(struct serial_private *priv, return pci_default_setup(priv, board, port, idx); } +static int kt_serial_setup(struct serial_private *priv, + const struct pciserial_board *board, + struct uart_port *port, int idx) +{ + port->flags |= UPF_IIR_ONCE; + return skip_tx_en_setup(priv, board, port, idx); +} + static int pci_eg20t_init(struct pci_dev *dev) { #if defined(CONFIG_SERIAL_PCH_UART) || defined(CONFIG_SERIAL_PCH_UART_MODULE) @@ -1110,7 +1118,18 @@ pci_xr17c154_setup(struct serial_private *priv, return pci_default_setup(priv, board, port, idx); } -/* This should be in linux/pci_ids.h */ +static int try_enable_msi(struct pci_dev *dev) +{ + /* use msi if available, but fallback to legacy otherwise */ + pci_enable_msi(dev); + return 0; +} + +static void disable_msi(struct pci_dev *dev) +{ + pci_disable_msi(dev); +} + #define PCI_VENDOR_ID_SBSMODULARIO 0x124B #define PCI_SUBVENDOR_ID_SBSMODULARIO 0x124B #define PCI_DEVICE_ID_OCTPRO 0x0001 @@ -1133,9 +1152,14 @@ pci_xr17c154_setup(struct serial_private *priv, #define PCI_DEVICE_ID_TITAN_800E 0xA014 #define PCI_DEVICE_ID_TITAN_200EI 0xA016 #define PCI_DEVICE_ID_TITAN_200EISI 0xA017 +#define PCI_DEVICE_ID_TITAN_400V3 0xA310 +#define PCI_DEVICE_ID_TITAN_410V3 0xA312 +#define PCI_DEVICE_ID_TITAN_800V3 0xA314 +#define PCI_DEVICE_ID_TITAN_800V3B 0xA315 #define PCI_DEVICE_ID_OXSEMI_16PCI958 0x9538 #define PCIE_DEVICE_ID_NEO_2_OX_IBM 0x00F6 #define PCI_DEVICE_ID_PLX_CRONYX_OMEGA 0xc001 +#define PCI_DEVICE_ID_INTEL_PATSBURG_KT 0x1d3d /* Unknown vendors/cards - this should not be in linux/pci_ids.h */ #define PCI_SUBDEVICE_ID_UNKNOWN_0x1584 0x1584 @@ -1220,6 +1244,15 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = { .subdevice = PCI_ANY_ID, .setup = ce4100_serial_setup, }, + { + .vendor = PCI_VENDOR_ID_INTEL, + .device = PCI_DEVICE_ID_INTEL_PATSBURG_KT, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = try_enable_msi, + .setup = kt_serial_setup, + .exit = disable_msi, + }, /* * ITE */ @@ -3414,6 +3447,18 @@ static struct pci_device_id serial_pci_tbl[] = { { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200EISI, PCI_ANY_ID, PCI_ANY_ID, 0, 0, pbn_oxsemi_2_4000000 }, + { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_400V3, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_4_921600 }, + { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_410V3, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_4_921600 }, + { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800V3, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_4_921600 }, + { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_800V3B, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_4_921600 }, { PCI_VENDOR_ID_SIIG, PCI_DEVICE_ID_SIIG_1S_10x_550, PCI_ANY_ID, PCI_ANY_ID, 0, 0, diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig index 95b21a619900..f32a2ea70100 100644 --- a/drivers/tty/serial/Kconfig +++ b/drivers/tty/serial/Kconfig @@ -97,6 +97,11 @@ config SERIAL_8250_PNP This builds standard PNP serial support. You may be able to disable this feature if you only need legacy serial support. +config SERIAL_8250_FSL + bool + depends on SERIAL_8250_CONSOLE && PPC_UDBG_16550 + default PPC + config SERIAL_8250_HP300 tristate depends on SERIAL_8250 && HP300 @@ -457,7 +462,7 @@ config SERIAL_SAMSUNG config SERIAL_SAMSUNG_UARTS_4 bool depends on ARM && PLAT_SAMSUNG - default y if CPU_S3C2443 + default y if !(CPU_S3C2410 || SERIAL_S3C2412 || CPU_S3C2440 || CPU_S3C2442) help Internal node for the common case of 4 Samsung compatible UARTs @@ -465,7 +470,7 @@ config SERIAL_SAMSUNG_UARTS int depends on ARM && PLAT_SAMSUNG default 6 if ARCH_S5P6450 - default 4 if SERIAL_SAMSUNG_UARTS_4 + default 4 if SERIAL_SAMSUNG_UARTS_4 || CPU_S3C2416 default 3 help Select the number of available UART ports for the Samsung S3C @@ -495,46 +500,27 @@ config SERIAL_SAMSUNG_CONSOLE your boot loader about how to pass options to the kernel at boot time.) -config SERIAL_S3C2410 - tristate "Samsung S3C2410 Serial port support" - depends on SERIAL_SAMSUNG && CPU_S3C2410 - default y if CPU_S3C2410 - help - Serial port support for the Samsung S3C2410 SoC - -config SERIAL_S3C2412 - tristate "Samsung S3C2412/S3C2413 Serial port support" - depends on SERIAL_SAMSUNG && CPU_S3C2412 - default y if CPU_S3C2412 - help - Serial port support for the Samsung S3C2412 and S3C2413 SoC - -config SERIAL_S3C2440 - tristate "Samsung S3C2440/S3C2442/S3C2416 Serial port support" - depends on SERIAL_SAMSUNG && (CPU_S3C2440 || CPU_S3C2442 || CPU_S3C2416) - default y if CPU_S3C2440 - default y if CPU_S3C2442 - select SERIAL_SAMSUNG_UARTS_4 if CPU_S3C2416 - help - Serial port support for the Samsung S3C2440, S3C2416 and S3C2442 SoC - -config SERIAL_S3C6400 - tristate "Samsung S3C6400/S3C6410/S5P6440/S5P6450/S5PC100 Serial port support" - depends on SERIAL_SAMSUNG && (CPU_S3C6400 || CPU_S3C6410 || CPU_S5P6440 || CPU_S5P6450 || CPU_S5PC100) - select SERIAL_SAMSUNG_UARTS_4 - default y - help - Serial port support for the Samsung S3C6400, S3C6410, S5P6440, S5P6450 - and S5PC100 SoCs - -config SERIAL_S5PV210 - tristate "Samsung S5PV210 Serial port support" - depends on SERIAL_SAMSUNG && (CPU_S5PV210 || CPU_EXYNOS4210 || SOC_EXYNOS4212) - select SERIAL_SAMSUNG_UARTS_4 if (CPU_S5PV210 || CPU_EXYNOS4210 || SOC_EXYNOS4212) - default y - help - Serial port support for Samsung's S5P Family of SoC's - +config SERIAL_SIRFSOC + tristate "SiRF SoC Platform Serial port support" + depends on ARM && ARCH_PRIMA2 + select SERIAL_CORE + help + Support for the on-chip UART on the CSR SiRFprimaII series, + providing /dev/ttySiRF0, 1 and 2 (note, some machines may not + provide all of these ports, depending on how the serial port + pins are configured). + +config SERIAL_SIRFSOC_CONSOLE + bool "Support for console on SiRF SoC serial port" + depends on SERIAL_SIRFSOC=y + select SERIAL_CORE_CONSOLE + help + Even if you say Y here, the currently visible virtual console + (/dev/tty0) will still be used as the system console by default, but + you can alter that using a kernel command line option such as + "console=ttySiRFx". (Try "man bootparam" or see the documentation of + your boot loader about how to pass options to the kernel at + boot time.) config SERIAL_MAX3100 tristate "MAX3100 support" @@ -1324,7 +1310,7 @@ config SERIAL_OF_PLATFORM config SERIAL_OMAP tristate "OMAP serial port support" - depends on ARCH_OMAP2 || ARCH_OMAP3 || ARCH_OMAP4 + depends on ARCH_OMAP2PLUS select SERIAL_CORE help If you have a machine based on an Texas Instruments OMAP CPU you @@ -1575,6 +1561,15 @@ config SERIAL_PCH_UART ML7213/ML7223/ML7831 is companion chip for Intel Atom E6xx series. ML7213/ML7223/ML7831 is completely compatible for Intel EG20T PCH. +config SERIAL_PCH_UART_CONSOLE + bool "Support for console on Intel EG20T PCH UART/OKI SEMICONDUCTOR ML7213 IOH" + depends on SERIAL_PCH_UART=y + select SERIAL_CORE_CONSOLE + help + Say Y here if you wish to use the PCH UART as the system console + (the system console is the device which receives all kernel messages and + warnings and which allows logins in single user mode). + config SERIAL_MSM_SMD bool "Enable tty device interface for some SMD ports" default n diff --git a/drivers/tty/serial/Makefile b/drivers/tty/serial/Makefile index e10cf5b54b6d..07e0494c6830 100644 --- a/drivers/tty/serial/Makefile +++ b/drivers/tty/serial/Makefile @@ -28,6 +28,7 @@ obj-$(CONFIG_SERIAL_8250_BOCA) += 8250_boca.o obj-$(CONFIG_SERIAL_8250_EXAR_ST16C554) += 8250_exar_st16c554.o obj-$(CONFIG_SERIAL_8250_HUB6) += 8250_hub6.o obj-$(CONFIG_SERIAL_8250_MCA) += 8250_mca.o +obj-$(CONFIG_SERIAL_8250_FSL) += 8250_fsl.o obj-$(CONFIG_SERIAL_8250_DW) += 8250_dw.o obj-$(CONFIG_SERIAL_AMBA_PL010) += amba-pl010.o obj-$(CONFIG_SERIAL_AMBA_PL011) += amba-pl011.o @@ -39,11 +40,6 @@ obj-$(CONFIG_SERIAL_BCM63XX) += bcm63xx_uart.o obj-$(CONFIG_SERIAL_BFIN) += bfin_uart.o obj-$(CONFIG_SERIAL_BFIN_SPORT) += bfin_sport_uart.o obj-$(CONFIG_SERIAL_SAMSUNG) += samsung.o -obj-$(CONFIG_SERIAL_S3C2410) += s3c2410.o -obj-$(CONFIG_SERIAL_S3C2412) += s3c2412.o -obj-$(CONFIG_SERIAL_S3C2440) += s3c2440.o -obj-$(CONFIG_SERIAL_S3C6400) += s3c6400.o -obj-$(CONFIG_SERIAL_S5PV210) += s5pv210.o obj-$(CONFIG_SERIAL_MAX3100) += max3100.o obj-$(CONFIG_SERIAL_MAX3107) += max3107.o obj-$(CONFIG_SERIAL_MAX3107_AAVA) += max3107-aava.o @@ -94,3 +90,4 @@ obj-$(CONFIG_SERIAL_MSM_SMD) += msm_smd_tty.o obj-$(CONFIG_SERIAL_MXS_AUART) += mxs-auart.o obj-$(CONFIG_SERIAL_LANTIQ) += lantiq.o obj-$(CONFIG_SERIAL_XILINX_PS_UART) += xilinx_uartps.o +obj-$(CONFIG_SERIAL_SIRFSOC) += sirfsoc_uart.o diff --git a/drivers/tty/serial/apbuart.c b/drivers/tty/serial/apbuart.c index 77554fd68d1f..7162f70d9260 100644 --- a/drivers/tty/serial/apbuart.c +++ b/drivers/tty/serial/apbuart.c @@ -577,7 +577,7 @@ static int __devinit apbuart_probe(struct platform_device *op) return 0; } -static struct of_device_id __initdata apbuart_match[] = { +static struct of_device_id apbuart_match[] = { { .name = "GAISLER_APBUART", }, @@ -597,7 +597,7 @@ static struct platform_driver grlib_apbuart_of_driver = { }; -static int grlib_apbuart_configure(void) +static int __init grlib_apbuart_configure(void) { struct device_node *np; int line = 0; diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c index 4c823f341d98..10605ecc99ab 100644 --- a/drivers/tty/serial/atmel_serial.c +++ b/drivers/tty/serial/atmel_serial.c @@ -212,8 +212,9 @@ void atmel_config_rs485(struct uart_port *port, struct serial_rs485 *rs485conf) { struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); unsigned int mode; + unsigned long flags; - spin_lock(&port->lock); + spin_lock_irqsave(&port->lock, flags); /* Disable interrupts */ UART_PUT_IDR(port, atmel_port->tx_done_mask); @@ -244,7 +245,7 @@ void atmel_config_rs485(struct uart_port *port, struct serial_rs485 *rs485conf) /* Enable interrupts */ UART_PUT_IER(port, atmel_port->tx_done_mask); - spin_unlock(&port->lock); + spin_unlock_irqrestore(&port->lock, flags); } @@ -1256,12 +1257,7 @@ static void atmel_set_termios(struct uart_port *port, struct ktermios *termios, static void atmel_set_ldisc(struct uart_port *port, int new) { - int line = port->line; - - if (line >= port->state->port.tty->driver->num) - return; - - if (port->state->port.tty->ldisc->ops->num == N_PPS) { + if (new == N_PPS) { port->flags |= UPF_HARDPPS_CD; atmel_enable_ms(port); } else { diff --git a/drivers/tty/serial/bfin_sport_uart.c b/drivers/tty/serial/bfin_sport_uart.c index ee101c0d358f..7fbc3a08f10d 100644 --- a/drivers/tty/serial/bfin_sport_uart.c +++ b/drivers/tty/serial/bfin_sport_uart.c @@ -299,8 +299,13 @@ static int sport_startup(struct uart_port *port) dev_info(port->dev, "Unable to attach BlackFin UART over SPORT CTS interrupt. So, disable it.\n"); } } - if (up->rts_pin >= 0) - gpio_direction_output(up->rts_pin, 0); + if (up->rts_pin >= 0) { + if (gpio_request(up->rts_pin, DRV_NAME)) { + dev_info(port->dev, "fail to request RTS PIN at GPIO_%d\n", up->rts_pin); + up->rts_pin = -1; + } else + gpio_direction_output(up->rts_pin, 0); + } #endif return 0; @@ -445,6 +450,8 @@ static void sport_shutdown(struct uart_port *port) #ifdef CONFIG_SERIAL_BFIN_SPORT_CTSRTS if (up->cts_pin >= 0) free_irq(gpio_to_irq(up->cts_pin), up); + if (up->rts_pin >= 0) + gpio_free(up->rts_pin); #endif } @@ -803,17 +810,16 @@ static int __devinit sport_uart_probe(struct platform_device *pdev) res = platform_get_resource(pdev, IORESOURCE_IO, 0); if (res == NULL) sport->cts_pin = -1; - else + else { sport->cts_pin = res->start; + sport->port.flags |= ASYNC_CTS_FLOW; + } res = platform_get_resource(pdev, IORESOURCE_IO, 1); if (res == NULL) sport->rts_pin = -1; else sport->rts_pin = res->start; - - if (sport->rts_pin >= 0) - gpio_request(sport->rts_pin, DRV_NAME); #endif } @@ -853,10 +859,6 @@ static int __devexit sport_uart_remove(struct platform_device *pdev) if (sport) { uart_remove_one_port(&sport_uart_reg, &sport->port); -#ifdef CONFIG_SERIAL_BFIN_CTSRTS - if (sport->rts_pin >= 0) - gpio_free(sport->rts_pin); -#endif iounmap(sport->port.membase); peripheral_free_list( (unsigned short *)pdev->dev.platform_data); diff --git a/drivers/tty/serial/bfin_sport_uart.h b/drivers/tty/serial/bfin_sport_uart.h index 6d06ce1d5675..e4510ea135ce 100644 --- a/drivers/tty/serial/bfin_sport_uart.h +++ b/drivers/tty/serial/bfin_sport_uart.h @@ -45,11 +45,12 @@ #define SPORT_GET_RX32(sport) \ ({ \ unsigned int __ret; \ + unsigned long flags; \ if (ANOMALY_05000473) \ - local_irq_disable(); \ + local_irq_save(flags); \ __ret = bfin_read32((sport)->port.membase + OFFSET_RX); \ if (ANOMALY_05000473) \ - local_irq_enable(); \ + local_irq_restore(flags); \ __ret; \ }) #define SPORT_GET_RCR1(sport) bfin_read16(((sport)->port.membase + OFFSET_RCR1)) diff --git a/drivers/tty/serial/bfin_uart.c b/drivers/tty/serial/bfin_uart.c index 66afb98b77b5..26953bfa6922 100644 --- a/drivers/tty/serial/bfin_uart.c +++ b/drivers/tty/serial/bfin_uart.c @@ -116,15 +116,22 @@ static void bfin_serial_set_mctrl(struct uart_port *port, unsigned int mctrl) static irqreturn_t bfin_serial_mctrl_cts_int(int irq, void *dev_id) { struct bfin_serial_port *uart = dev_id; - unsigned int status; - - status = bfin_serial_get_mctrl(&uart->port); - uart_handle_cts_change(&uart->port, status & TIOCM_CTS); + unsigned int status = bfin_serial_get_mctrl(&uart->port); #ifdef CONFIG_SERIAL_BFIN_HARD_CTSRTS - uart->scts = 1; + struct tty_struct *tty = uart->port.state->port.tty; + UART_CLEAR_SCTS(uart); - UART_CLEAR_IER(uart, EDSSI); + if (tty->hw_stopped) { + if (status) { + tty->hw_stopped = 0; + uart_write_wakeup(&uart->port); + } + } else { + if (!status) + tty->hw_stopped = 1; + } #endif + uart_handle_cts_change(&uart->port, status & TIOCM_CTS); return IRQ_HANDLED; } @@ -175,13 +182,6 @@ static void bfin_serial_start_tx(struct uart_port *port) struct bfin_serial_port *uart = (struct bfin_serial_port *)port; struct tty_struct *tty = uart->port.state->port.tty; -#ifdef CONFIG_SERIAL_BFIN_HARD_CTSRTS - if (uart->scts && !(bfin_serial_get_mctrl(&uart->port) & TIOCM_CTS)) { - uart->scts = 0; - uart_handle_cts_change(&uart->port, uart->scts); - } -#endif - /* * To avoid losting RX interrupt, we reset IR function * before sending data. @@ -380,12 +380,6 @@ static irqreturn_t bfin_serial_tx_int(int irq, void *dev_id) { struct bfin_serial_port *uart = dev_id; -#ifdef CONFIG_SERIAL_BFIN_HARD_CTSRTS - if (uart->scts && !(bfin_serial_get_mctrl(&uart->port) & TIOCM_CTS)) { - uart->scts = 0; - uart_handle_cts_change(&uart->port, uart->scts); - } -#endif spin_lock(&uart->port.lock); if (UART_GET_LSR(uart) & THRE) bfin_serial_tx_chars(uart); @@ -531,13 +525,6 @@ static irqreturn_t bfin_serial_dma_tx_int(int irq, void *dev_id) struct bfin_serial_port *uart = dev_id; struct circ_buf *xmit = &uart->port.state->xmit; -#ifdef CONFIG_SERIAL_BFIN_HARD_CTSRTS - if (uart->scts && !(bfin_serial_get_mctrl(&uart->port)&TIOCM_CTS)) { - uart->scts = 0; - uart_handle_cts_change(&uart->port, uart->scts); - } -#endif - spin_lock(&uart->port.lock); if (!(get_dma_curr_irqstat(uart->tx_dma_channel)&DMA_RUN)) { disable_dma(uart->tx_dma_channel); @@ -739,20 +726,26 @@ static int bfin_serial_startup(struct uart_port *port) pr_info("Unable to attach BlackFin UART CTS interrupt. So, disable it.\n"); } } - if (uart->rts_pin >= 0) - gpio_direction_output(uart->rts_pin, 0); + if (uart->rts_pin >= 0) { + if (gpio_request(uart->rts_pin, DRIVER_NAME)) { + pr_info("fail to request RTS PIN at GPIO_%d\n", uart->rts_pin); + uart->rts_pin = -1; + } else + gpio_direction_output(uart->rts_pin, 0); + } #endif #ifdef CONFIG_SERIAL_BFIN_HARD_CTSRTS - if (uart->cts_pin >= 0 && request_irq(uart->status_irq, - bfin_serial_mctrl_cts_int, - 0, "BFIN_UART_MODEM_STATUS", uart)) { - uart->cts_pin = -1; - pr_info("Unable to attach BlackFin UART Modem Status interrupt.\n"); - } + if (uart->cts_pin >= 0) { + if (request_irq(uart->status_irq, bfin_serial_mctrl_cts_int, + IRQF_DISABLED, "BFIN_UART_MODEM_STATUS", uart)) { + uart->cts_pin = -1; + dev_info(port->dev, "Unable to attach BlackFin UART Modem Status interrupt.\n"); + } - /* CTS RTS PINs are negative assertive. */ - UART_PUT_MCR(uart, ACTS); - UART_SET_IER(uart, EDSSI); + /* CTS RTS PINs are negative assertive. */ + UART_PUT_MCR(uart, ACTS); + UART_SET_IER(uart, EDSSI); + } #endif UART_SET_IER(uart, ERBFI); @@ -792,6 +785,8 @@ static void bfin_serial_shutdown(struct uart_port *port) #ifdef CONFIG_SERIAL_BFIN_CTSRTS if (uart->cts_pin >= 0) free_irq(gpio_to_irq(uart->cts_pin), uart); + if (uart->rts_pin >= 0) + gpio_free(uart->rts_pin); #endif #ifdef CONFIG_SERIAL_BFIN_HARD_CTSRTS if (uart->cts_pin >= 0) @@ -1370,18 +1365,18 @@ static int bfin_serial_probe(struct platform_device *pdev) res = platform_get_resource(pdev, IORESOURCE_IO, 0); if (res == NULL) uart->cts_pin = -1; - else + else { uart->cts_pin = res->start; +#ifdef CONFIG_SERIAL_BFIN_CTSRTS + uart->port.flags |= ASYNC_CTS_FLOW; +#endif + } res = platform_get_resource(pdev, IORESOURCE_IO, 1); if (res == NULL) uart->rts_pin = -1; else uart->rts_pin = res->start; -# if defined(CONFIG_SERIAL_BFIN_CTSRTS) - if (uart->rts_pin >= 0) - gpio_request(uart->rts_pin, DRIVER_NAME); -# endif #endif } @@ -1421,10 +1416,6 @@ static int __devexit bfin_serial_remove(struct platform_device *pdev) if (uart) { uart_remove_one_port(&bfin_serial_reg, &uart->port); -#ifdef CONFIG_SERIAL_BFIN_CTSRTS - if (uart->rts_pin >= 0) - gpio_free(uart->rts_pin); -#endif iounmap(uart->port.membase); peripheral_free_list( (unsigned short *)pdev->dev.platform_data); diff --git a/drivers/tty/serial/ifx6x60.c b/drivers/tty/serial/ifx6x60.c index 426434e5eb7c..7e925e20cbaa 100644 --- a/drivers/tty/serial/ifx6x60.c +++ b/drivers/tty/serial/ifx6x60.c @@ -1334,7 +1334,6 @@ MODULE_DEVICE_TABLE(spi, ifx_id_table); static const struct spi_driver ifx_spi_driver = { .driver = { .name = DRVNAME, - .bus = &spi_bus_type, .pm = &ifx_spi_pm, .owner = THIS_MODULE}, .probe = ifx_spi_spi_probe, diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c index 163fc9021f5a..0b7fed746b27 100644 --- a/drivers/tty/serial/imx.c +++ b/drivers/tty/serial/imx.c @@ -102,6 +102,7 @@ #define UCR2_STPB (1<<6) /* Stop */ #define UCR2_WS (1<<5) /* Word size */ #define UCR2_RTSEN (1<<4) /* Request to send interrupt enable */ +#define UCR2_ATEN (1<<3) /* Aging Timer Enable */ #define UCR2_TXEN (1<<2) /* Transmitter enabled */ #define UCR2_RXEN (1<<1) /* Receiver enabled */ #define UCR2_SRST (1<<0) /* SW reset */ @@ -207,6 +208,12 @@ struct imx_port { struct imx_uart_data *devdata; }; +struct imx_port_ucrs { + unsigned int ucr1; + unsigned int ucr2; + unsigned int ucr3; +}; + #ifdef CONFIG_IRDA #define USE_IRDA(sport) ((sport)->use_irda) #else @@ -260,6 +267,27 @@ static inline int is_imx21_uart(struct imx_port *sport) } /* + * Save and restore functions for UCR1, UCR2 and UCR3 registers + */ +static void imx_port_ucrs_save(struct uart_port *port, + struct imx_port_ucrs *ucr) +{ + /* save control registers */ + ucr->ucr1 = readl(port->membase + UCR1); + ucr->ucr2 = readl(port->membase + UCR2); + ucr->ucr3 = readl(port->membase + UCR3); +} + +static void imx_port_ucrs_restore(struct uart_port *port, + struct imx_port_ucrs *ucr) +{ + /* restore control registers */ + writel(ucr->ucr1, port->membase + UCR1); + writel(ucr->ucr2, port->membase + UCR2); + writel(ucr->ucr3, port->membase + UCR3); +} + +/* * Handle any change of modem status signal since we were last called. */ static void imx_mctrl_check(struct imx_port *sport) @@ -566,6 +594,9 @@ static irqreturn_t imx_int(int irq, void *dev_id) if (sts & USR1_RTSD) imx_rtsint(irq, dev_id); + if (sts & USR1_AWAKE) + writel(USR1_AWAKE, sport->port.membase + USR1); + return IRQ_HANDLED; } @@ -901,6 +932,8 @@ imx_set_termios(struct uart_port *port, struct ktermios *termios, ucr2 |= UCR2_PROE; } + del_timer_sync(&sport->timer); + /* * Ask the core to calculate the divisor for us. */ @@ -931,8 +964,6 @@ imx_set_termios(struct uart_port *port, struct ktermios *termios, sport->port.ignore_status_mask |= URXD_OVRRUN; } - del_timer_sync(&sport->timer); - /* * Update the per-port timeout. */ @@ -1079,6 +1110,70 @@ imx_verify_port(struct uart_port *port, struct serial_struct *ser) return ret; } +#if defined(CONFIG_CONSOLE_POLL) +static int imx_poll_get_char(struct uart_port *port) +{ + struct imx_port_ucrs old_ucr; + unsigned int status; + unsigned char c; + + /* save control registers */ + imx_port_ucrs_save(port, &old_ucr); + + /* disable interrupts */ + writel(UCR1_UARTEN, port->membase + UCR1); + writel(old_ucr.ucr2 & ~(UCR2_ATEN | UCR2_RTSEN | UCR2_ESCI), + port->membase + UCR2); + writel(old_ucr.ucr3 & ~(UCR3_DCD | UCR3_RI | UCR3_DTREN), + port->membase + UCR3); + + /* poll */ + do { + status = readl(port->membase + USR2); + } while (~status & USR2_RDR); + + /* read */ + c = readl(port->membase + URXD0); + + /* restore control registers */ + imx_port_ucrs_restore(port, &old_ucr); + + return c; +} + +static void imx_poll_put_char(struct uart_port *port, unsigned char c) +{ + struct imx_port_ucrs old_ucr; + unsigned int status; + + /* save control registers */ + imx_port_ucrs_save(port, &old_ucr); + + /* disable interrupts */ + writel(UCR1_UARTEN, port->membase + UCR1); + writel(old_ucr.ucr2 & ~(UCR2_ATEN | UCR2_RTSEN | UCR2_ESCI), + port->membase + UCR2); + writel(old_ucr.ucr3 & ~(UCR3_DCD | UCR3_RI | UCR3_DTREN), + port->membase + UCR3); + + /* drain */ + do { + status = readl(port->membase + USR1); + } while (~status & USR1_TRDY); + + /* write */ + writel(c, port->membase + URTX0); + + /* flush */ + do { + status = readl(port->membase + USR2); + } while (~status & USR2_TXDC); + + /* restore control registers */ + imx_port_ucrs_restore(port, &old_ucr); +} +#endif + static struct uart_ops imx_pops = { .tx_empty = imx_tx_empty, .set_mctrl = imx_set_mctrl, @@ -1096,6 +1191,10 @@ static struct uart_ops imx_pops = { .request_port = imx_request_port, .config_port = imx_config_port, .verify_port = imx_verify_port, +#if defined(CONFIG_CONSOLE_POLL) + .poll_get_char = imx_poll_get_char, + .poll_put_char = imx_poll_put_char, +#endif }; static struct imx_port *imx_ports[UART_NR]; @@ -1118,13 +1217,14 @@ static void imx_console_write(struct console *co, const char *s, unsigned int count) { struct imx_port *sport = imx_ports[co->index]; - unsigned int old_ucr1, old_ucr2, ucr1; + struct imx_port_ucrs old_ucr; + unsigned int ucr1; /* - * First, save UCR1/2 and then disable interrupts + * First, save UCR1/2/3 and then disable interrupts */ - ucr1 = old_ucr1 = readl(sport->port.membase + UCR1); - old_ucr2 = readl(sport->port.membase + UCR2); + imx_port_ucrs_save(&sport->port, &old_ucr); + ucr1 = old_ucr.ucr1; if (is_imx1_uart(sport)) ucr1 |= IMX1_UCR1_UARTCLKEN; @@ -1133,18 +1233,17 @@ imx_console_write(struct console *co, const char *s, unsigned int count) writel(ucr1, sport->port.membase + UCR1); - writel(old_ucr2 | UCR2_TXEN, sport->port.membase + UCR2); + writel(old_ucr.ucr2 | UCR2_TXEN, sport->port.membase + UCR2); uart_console_write(&sport->port, s, count, imx_console_putchar); /* * Finally, wait for transmitter to become empty - * and restore UCR1/2 + * and restore UCR1/2/3 */ while (!(readl(sport->port.membase + USR2) & USR2_TXDC)); - writel(old_ucr1, sport->port.membase + UCR1); - writel(old_ucr2, sport->port.membase + UCR2); + imx_port_ucrs_restore(&sport->port, &old_ucr); } /* @@ -1269,6 +1368,12 @@ static struct uart_driver imx_reg = { static int serial_imx_suspend(struct platform_device *dev, pm_message_t state) { struct imx_port *sport = platform_get_drvdata(dev); + unsigned int val; + + /* enable wakeup from i.MX UART */ + val = readl(sport->port.membase + UCR3); + val |= UCR3_AWAKEN; + writel(val, sport->port.membase + UCR3); if (sport) uart_suspend_port(&imx_reg, &sport->port); @@ -1279,6 +1384,12 @@ static int serial_imx_suspend(struct platform_device *dev, pm_message_t state) static int serial_imx_resume(struct platform_device *dev) { struct imx_port *sport = platform_get_drvdata(dev); + unsigned int val; + + /* disable wakeup from i.MX UART */ + val = readl(sport->port.membase + UCR3); + val &= ~UCR3_AWAKEN; + writel(val, sport->port.membase + UCR3); if (sport) uart_resume_port(&imx_reg, &sport->port); @@ -1287,6 +1398,10 @@ static int serial_imx_resume(struct platform_device *dev) } #ifdef CONFIG_OF +/* + * This function returns 1 iff pdev isn't a device instatiated by dt, 0 iff it + * could successfully get all information from dt or a negative errno. + */ static int serial_imx_probe_dt(struct imx_port *sport, struct platform_device *pdev) { @@ -1296,12 +1411,13 @@ static int serial_imx_probe_dt(struct imx_port *sport, int ret; if (!np) - return -ENODEV; + /* no device tree device */ + return 1; ret = of_alias_get_id(np, "serial"); if (ret < 0) { dev_err(&pdev->dev, "failed to get alias id, errno %d\n", ret); - return -ENODEV; + return ret; } sport->port.line = ret; @@ -1319,7 +1435,7 @@ static int serial_imx_probe_dt(struct imx_port *sport, static inline int serial_imx_probe_dt(struct imx_port *sport, struct platform_device *pdev) { - return -ENODEV; + return 1; } #endif @@ -1354,8 +1470,10 @@ static int serial_imx_probe(struct platform_device *pdev) return -ENOMEM; ret = serial_imx_probe_dt(sport, pdev); - if (ret == -ENODEV) + if (ret > 0) serial_imx_probe_pdata(sport, pdev); + else if (ret < 0) + goto free; res = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!res) { @@ -1476,7 +1594,7 @@ static int __init imx_serial_init(void) if (ret != 0) uart_unregister_driver(&imx_reg); - return 0; + return ret; } static void __exit imx_serial_exit(void) diff --git a/drivers/tty/serial/m32r_sio.c b/drivers/tty/serial/m32r_sio.c index 08018934e013..94a6792bf97b 100644 --- a/drivers/tty/serial/m32r_sio.c +++ b/drivers/tty/serial/m32r_sio.c @@ -1000,11 +1000,8 @@ static void __init m32r_sio_register_ports(struct uart_driver *drv) init_timer(&up->timer); up->timer.function = m32r_sio_timeout; - /* - * ALPHA_KLUDGE_MCR needs to be killed. - */ - up->mcr_mask = ~ALPHA_KLUDGE_MCR; - up->mcr_force = ALPHA_KLUDGE_MCR; + up->mcr_mask = ~0; + up->mcr_force = 0; uart_add_one_port(drv, &up->port); } diff --git a/drivers/tty/serial/max3100.c b/drivers/tty/serial/max3100.c index 8a6cc8c30b5a..b4902b99cfd2 100644 --- a/drivers/tty/serial/max3100.c +++ b/drivers/tty/serial/max3100.c @@ -901,7 +901,6 @@ static int max3100_resume(struct spi_device *spi) static struct spi_driver max3100_driver = { .driver = { .name = "max3100", - .bus = &spi_bus_type, .owner = THIS_MODULE, }, diff --git a/drivers/tty/serial/max3107-aava.c b/drivers/tty/serial/max3107-aava.c index 90c40f22ec70..aae772a71de6 100644 --- a/drivers/tty/serial/max3107-aava.c +++ b/drivers/tty/serial/max3107-aava.c @@ -315,7 +315,6 @@ static int __devinit max3107_probe_aava(struct spi_device *spi) static struct spi_driver max3107_driver = { .driver = { .name = "aava-max3107", - .bus = &spi_bus_type, .owner = THIS_MODULE, }, .probe = max3107_probe_aava, diff --git a/drivers/tty/serial/max3107.c b/drivers/tty/serial/max3107.c index 7827000db4f5..17c7ba805d98 100644 --- a/drivers/tty/serial/max3107.c +++ b/drivers/tty/serial/max3107.c @@ -1181,7 +1181,6 @@ static int max3107_probe_generic(struct spi_device *spi) static struct spi_driver max3107_driver = { .driver = { .name = "max3107", - .bus = &spi_bus_type, .owner = THIS_MODULE, }, .probe = max3107_probe_generic, diff --git a/drivers/tty/serial/mfd.c b/drivers/tty/serial/mfd.c index e272d3919c67..a9234ba8f8d5 100644 --- a/drivers/tty/serial/mfd.c +++ b/drivers/tty/serial/mfd.c @@ -1154,7 +1154,6 @@ serial_hsu_console_setup(struct console *co, char *options) int bits = 8; int parity = 'n'; int flow = 'n'; - int ret; if (co->index == -1 || co->index >= serial_hsu_reg.nr) co->index = 0; @@ -1165,9 +1164,7 @@ serial_hsu_console_setup(struct console *co, char *options) if (options) uart_parse_options(options, &baud, &parity, &bits, &flow); - ret = uart_set_options(&up->port, co, baud, parity, bits, flow); - - return ret; + return uart_set_options(&up->port, co, baud, parity, bits, flow); } static struct console serial_hsu_console = { @@ -1176,9 +1173,13 @@ static struct console serial_hsu_console = { .device = uart_console_device, .setup = serial_hsu_console_setup, .flags = CON_PRINTBUFFER, - .index = 2, + .index = -1, .data = &serial_hsu_reg, }; + +#define SERIAL_HSU_CONSOLE (&serial_hsu_console) +#else +#define SERIAL_HSU_CONSOLE NULL #endif struct uart_ops serial_hsu_pops = { @@ -1208,6 +1209,7 @@ static struct uart_driver serial_hsu_reg = { .major = TTY_MAJOR, .minor = 128, .nr = 3, + .cons = SERIAL_HSU_CONSOLE, }; #ifdef CONFIG_PM @@ -1342,12 +1344,6 @@ static int serial_hsu_probe(struct pci_dev *pdev, } uart_add_one_port(&serial_hsu_reg, &uport->port); -#ifdef CONFIG_SERIAL_MFD_HSU_CONSOLE - if (index == 2) { - register_console(&serial_hsu_console); - uport->port.cons = &serial_hsu_console; - } -#endif pci_set_drvdata(pdev, uport); } diff --git a/drivers/tty/serial/mrst_max3110.c b/drivers/tty/serial/mrst_max3110.c index 4c309e869903..df2a2240a3ae 100644 --- a/drivers/tty/serial/mrst_max3110.c +++ b/drivers/tty/serial/mrst_max3110.c @@ -876,7 +876,6 @@ static int __devexit serial_m3110_remove(struct spi_device *dev) static struct spi_driver uart_max3110_driver = { .driver = { .name = "spi_max3111", - .bus = &spi_bus_type, .owner = THIS_MODULE, }, .probe = serial_m3110_probe, diff --git a/drivers/tty/serial/msm_serial_hs.c b/drivers/tty/serial/msm_serial_hs.c index 60c6eb850265..5e85e1e14c44 100644 --- a/drivers/tty/serial/msm_serial_hs.c +++ b/drivers/tty/serial/msm_serial_hs.c @@ -422,9 +422,9 @@ static int __devexit msm_hs_remove(struct platform_device *pdev) msm_uport->rx.rbuffer); dma_pool_destroy(msm_uport->rx.pool); - dma_unmap_single(dev, msm_uport->rx.cmdptr_dmaaddr, sizeof(u32 *), + dma_unmap_single(dev, msm_uport->rx.cmdptr_dmaaddr, sizeof(u32), DMA_TO_DEVICE); - dma_unmap_single(dev, msm_uport->tx.mapped_cmd_ptr_ptr, sizeof(u32 *), + dma_unmap_single(dev, msm_uport->tx.mapped_cmd_ptr_ptr, sizeof(u32), DMA_TO_DEVICE); dma_unmap_single(dev, msm_uport->tx.mapped_cmd_ptr, sizeof(dmov_box), DMA_TO_DEVICE); @@ -812,7 +812,7 @@ static void msm_hs_submit_tx_locked(struct uart_port *uport) *tx->command_ptr_ptr = CMD_PTR_LP | DMOV_CMD_ADDR(tx->mapped_cmd_ptr); dma_sync_single_for_device(uport->dev, tx->mapped_cmd_ptr_ptr, - sizeof(u32 *), DMA_TO_DEVICE); + sizeof(u32), DMA_TO_DEVICE); /* Save tx_count to use in Callback */ tx->tx_count = tx_count; @@ -1087,12 +1087,10 @@ static void msm_hs_config_port(struct uart_port *uport, int cfg_flags) } /* Handle CTS changes (Called from interrupt handler) */ -static void msm_hs_handle_delta_cts(struct uart_port *uport) +static void msm_hs_handle_delta_cts_locked(struct uart_port *uport) { - unsigned long flags; struct msm_hs_port *msm_uport = UARTDM_TO_MSM(uport); - spin_lock_irqsave(&uport->lock, flags); clk_enable(msm_uport->clk); /* clear interrupt */ @@ -1100,7 +1098,6 @@ static void msm_hs_handle_delta_cts(struct uart_port *uport) uport->icount.cts++; clk_disable(msm_uport->clk); - spin_unlock_irqrestore(&uport->lock, flags); /* clear the IOCTL TIOCMIWAIT if called */ wake_up_interruptible(&uport->state->port.delta_msr_wait); @@ -1248,7 +1245,7 @@ static irqreturn_t msm_hs_isr(int irq, void *dev) /* Change in CTS interrupt */ if (isr_status & UARTDM_ISR_DELTA_CTS_BMSK) - msm_hs_handle_delta_cts(uport); + msm_hs_handle_delta_cts_locked(uport); spin_unlock_irqrestore(&uport->lock, flags); @@ -1537,7 +1534,7 @@ static int __devinit uartdm_init_port(struct uart_port *uport) if (!tx->command_ptr) return -ENOMEM; - tx->command_ptr_ptr = kmalloc(sizeof(u32 *), GFP_KERNEL | __GFP_DMA); + tx->command_ptr_ptr = kmalloc(sizeof(u32), GFP_KERNEL | __GFP_DMA); if (!tx->command_ptr_ptr) { ret = -ENOMEM; goto err_tx_command_ptr_ptr; @@ -1547,7 +1544,7 @@ static int __devinit uartdm_init_port(struct uart_port *uport) sizeof(dmov_box), DMA_TO_DEVICE); tx->mapped_cmd_ptr_ptr = dma_map_single(uport->dev, tx->command_ptr_ptr, - sizeof(u32 *), DMA_TO_DEVICE); + sizeof(u32), DMA_TO_DEVICE); tx->xfer.cmdptr = DMOV_CMD_ADDR(tx->mapped_cmd_ptr_ptr); init_waitqueue_head(&rx->wait); @@ -1575,7 +1572,7 @@ static int __devinit uartdm_init_port(struct uart_port *uport) goto err_rx_command_ptr; } - rx->command_ptr_ptr = kmalloc(sizeof(u32 *), GFP_KERNEL | __GFP_DMA); + rx->command_ptr_ptr = kmalloc(sizeof(u32), GFP_KERNEL | __GFP_DMA); if (!rx->command_ptr_ptr) { pr_err("%s(): cannot allocate rx->command_ptr_ptr", __func__); ret = -ENOMEM; @@ -1593,7 +1590,7 @@ static int __devinit uartdm_init_port(struct uart_port *uport) *rx->command_ptr_ptr = CMD_PTR_LP | DMOV_CMD_ADDR(rx->mapped_cmd_ptr); rx->cmdptr_dmaaddr = dma_map_single(uport->dev, rx->command_ptr_ptr, - sizeof(u32 *), DMA_TO_DEVICE); + sizeof(u32), DMA_TO_DEVICE); rx->xfer.cmdptr = DMOV_CMD_ADDR(rx->cmdptr_dmaaddr); INIT_WORK(&rx->tty_work, msm_hs_tty_flip_buffer_work); @@ -1609,7 +1606,7 @@ err_dma_pool_alloc: dma_pool_destroy(msm_uport->rx.pool); err_dma_pool_create: dma_unmap_single(uport->dev, msm_uport->tx.mapped_cmd_ptr_ptr, - sizeof(u32 *), DMA_TO_DEVICE); + sizeof(u32), DMA_TO_DEVICE); dma_unmap_single(uport->dev, msm_uport->tx.mapped_cmd_ptr, sizeof(dmov_box), DMA_TO_DEVICE); kfree(msm_uport->tx.command_ptr_ptr); diff --git a/drivers/tty/serial/mxs-auart.c b/drivers/tty/serial/mxs-auart.c index 7e02c9c344fe..55fd362b9879 100644 --- a/drivers/tty/serial/mxs-auart.c +++ b/drivers/tty/serial/mxs-auart.c @@ -145,11 +145,12 @@ static inline void mxs_auart_tx_chars(struct mxs_auart_port *s) writel(xmit->buf[xmit->tail], s->port.membase + AUART_DATA); xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) - uart_write_wakeup(&s->port); } else break; } + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(&s->port); + if (uart_circ_empty(&(s->port.state->xmit))) writel(AUART_INTR_TXIEN, s->port.membase + AUART_INTR_CLR); @@ -424,7 +425,7 @@ static int mxs_auart_startup(struct uart_port *u) { struct mxs_auart_port *s = to_auart_port(u); - clk_enable(s->clk); + clk_prepare_enable(s->clk); writel(AUART_CTRL0_CLKGATE, u->membase + AUART_CTRL0_CLR); @@ -453,7 +454,7 @@ static void mxs_auart_shutdown(struct uart_port *u) writel(AUART_INTR_RXIEN | AUART_INTR_RTIEN | AUART_INTR_CTSMIEN, u->membase + AUART_INTR_CLR); - clk_disable(s->clk); + clk_disable_unprepare(s->clk); } static unsigned int mxs_auart_tx_empty(struct uart_port *u) @@ -634,7 +635,7 @@ auart_console_setup(struct console *co, char *options) if (!s) return -ENODEV; - clk_enable(s->clk); + clk_prepare_enable(s->clk); if (options) uart_parse_options(options, &baud, &parity, &bits, &flow); @@ -643,7 +644,7 @@ auart_console_setup(struct console *co, char *options) ret = uart_set_options(&s->port, co, baud, parity, bits, flow); - clk_disable(s->clk); + clk_disable_unprepare(s->clk); return ret; } diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c index 5e713d3ef1f4..d192dcbb82f5 100644 --- a/drivers/tty/serial/omap-serial.c +++ b/drivers/tty/serial/omap-serial.c @@ -37,17 +37,24 @@ #include <linux/clk.h> #include <linux/serial_core.h> #include <linux/irq.h> +#include <linux/pm_runtime.h> +#include <linux/of.h> #include <plat/dma.h> #include <plat/dmtimer.h> #include <plat/omap-serial.h> +#define DEFAULT_CLK_SPEED 48000000 /* 48Mhz*/ + static struct uart_omap_port *ui[OMAP_MAX_HSUART_PORTS]; /* Forward declaration of functions */ static void uart_tx_dma_callback(int lch, u16 ch_status, void *data); -static void serial_omap_rx_timeout(unsigned long uart_no); +static void serial_omap_rxdma_poll(unsigned long uart_no); static int serial_omap_start_rxdma(struct uart_omap_port *up); +static void serial_omap_mdr1_errataset(struct uart_omap_port *up, u8 mdr1); + +static struct workqueue_struct *serial_omap_uart_wq; static inline unsigned int serial_in(struct uart_omap_port *up, int offset) { @@ -102,6 +109,8 @@ static void serial_omap_stop_rxdma(struct uart_omap_port *up) omap_free_dma(up->uart_dma.rx_dma_channel); up->uart_dma.rx_dma_channel = OMAP_UART_DMA_CH_FREE; up->uart_dma.rx_dma_used = false; + pm_runtime_mark_last_busy(&up->pdev->dev); + pm_runtime_put_autosuspend(&up->pdev->dev); } } @@ -109,9 +118,12 @@ static void serial_omap_enable_ms(struct uart_port *port) { struct uart_omap_port *up = (struct uart_omap_port *)port; - dev_dbg(up->port.dev, "serial_omap_enable_ms+%d\n", up->pdev->id); + dev_dbg(up->port.dev, "serial_omap_enable_ms+%d\n", up->port.line); + + pm_runtime_get_sync(&up->pdev->dev); up->ier |= UART_IER_MSI; serial_out(up, UART_IER, up->ier); + pm_runtime_put(&up->pdev->dev); } static void serial_omap_stop_tx(struct uart_port *port) @@ -129,30 +141,40 @@ static void serial_omap_stop_tx(struct uart_port *port) omap_stop_dma(up->uart_dma.tx_dma_channel); omap_free_dma(up->uart_dma.tx_dma_channel); up->uart_dma.tx_dma_channel = OMAP_UART_DMA_CH_FREE; + pm_runtime_mark_last_busy(&up->pdev->dev); + pm_runtime_put_autosuspend(&up->pdev->dev); } + pm_runtime_get_sync(&up->pdev->dev); if (up->ier & UART_IER_THRI) { up->ier &= ~UART_IER_THRI; serial_out(up, UART_IER, up->ier); } + + pm_runtime_mark_last_busy(&up->pdev->dev); + pm_runtime_put_autosuspend(&up->pdev->dev); } static void serial_omap_stop_rx(struct uart_port *port) { struct uart_omap_port *up = (struct uart_omap_port *)port; + pm_runtime_get_sync(&up->pdev->dev); if (up->use_dma) serial_omap_stop_rxdma(up); up->ier &= ~UART_IER_RLSI; up->port.read_status_mask &= ~UART_LSR_DR; serial_out(up, UART_IER, up->ier); + pm_runtime_mark_last_busy(&up->pdev->dev); + pm_runtime_put_autosuspend(&up->pdev->dev); } -static inline void receive_chars(struct uart_omap_port *up, int *status) +static inline void receive_chars(struct uart_omap_port *up, + unsigned int *status) { struct tty_struct *tty = up->port.state->port.tty; - unsigned int flag; - unsigned char ch, lsr = *status; + unsigned int flag, lsr = *status; + unsigned char ch = 0; int max_count = 256; do { @@ -262,7 +284,10 @@ static void serial_omap_start_tx(struct uart_port *port) int ret = 0; if (!up->use_dma) { + pm_runtime_get_sync(&up->pdev->dev); serial_omap_enable_ier_thri(up); + pm_runtime_mark_last_busy(&up->pdev->dev); + pm_runtime_put_autosuspend(&up->pdev->dev); return; } @@ -272,6 +297,7 @@ static void serial_omap_start_tx(struct uart_port *port) xmit = &up->port.state->xmit; if (up->uart_dma.tx_dma_channel == OMAP_UART_DMA_CH_FREE) { + pm_runtime_get_sync(&up->pdev->dev); ret = omap_request_dma(up->uart_dma.uart_dma_tx, "UART Tx DMA", (void *)uart_tx_dma_callback, up, @@ -354,9 +380,13 @@ static inline irqreturn_t serial_omap_irq(int irq, void *dev_id) unsigned int iir, lsr; unsigned long flags; + pm_runtime_get_sync(&up->pdev->dev); iir = serial_in(up, UART_IIR); - if (iir & UART_IIR_NO_INT) + if (iir & UART_IIR_NO_INT) { + pm_runtime_mark_last_busy(&up->pdev->dev); + pm_runtime_put_autosuspend(&up->pdev->dev); return IRQ_NONE; + } spin_lock_irqsave(&up->port.lock, flags); lsr = serial_in(up, UART_LSR); @@ -378,6 +408,9 @@ static inline irqreturn_t serial_omap_irq(int irq, void *dev_id) transmit_chars(up); spin_unlock_irqrestore(&up->port.lock, flags); + pm_runtime_mark_last_busy(&up->pdev->dev); + pm_runtime_put_autosuspend(&up->pdev->dev); + up->port_activity = jiffies; return IRQ_HANDLED; } @@ -388,22 +421,26 @@ static unsigned int serial_omap_tx_empty(struct uart_port *port) unsigned long flags = 0; unsigned int ret = 0; - dev_dbg(up->port.dev, "serial_omap_tx_empty+%d\n", up->pdev->id); + pm_runtime_get_sync(&up->pdev->dev); + dev_dbg(up->port.dev, "serial_omap_tx_empty+%d\n", up->port.line); spin_lock_irqsave(&up->port.lock, flags); ret = serial_in(up, UART_LSR) & UART_LSR_TEMT ? TIOCSER_TEMT : 0; spin_unlock_irqrestore(&up->port.lock, flags); - + pm_runtime_put(&up->pdev->dev); return ret; } static unsigned int serial_omap_get_mctrl(struct uart_port *port) { struct uart_omap_port *up = (struct uart_omap_port *)port; - unsigned char status; + unsigned int status; unsigned int ret = 0; + pm_runtime_get_sync(&up->pdev->dev); status = check_modem_status(up); - dev_dbg(up->port.dev, "serial_omap_get_mctrl+%d\n", up->pdev->id); + pm_runtime_put(&up->pdev->dev); + + dev_dbg(up->port.dev, "serial_omap_get_mctrl+%d\n", up->port.line); if (status & UART_MSR_DCD) ret |= TIOCM_CAR; @@ -421,7 +458,7 @@ static void serial_omap_set_mctrl(struct uart_port *port, unsigned int mctrl) struct uart_omap_port *up = (struct uart_omap_port *)port; unsigned char mcr = 0; - dev_dbg(up->port.dev, "serial_omap_set_mctrl+%d\n", up->pdev->id); + dev_dbg(up->port.dev, "serial_omap_set_mctrl+%d\n", up->port.line); if (mctrl & TIOCM_RTS) mcr |= UART_MCR_RTS; if (mctrl & TIOCM_DTR) @@ -433,8 +470,11 @@ static void serial_omap_set_mctrl(struct uart_port *port, unsigned int mctrl) if (mctrl & TIOCM_LOOP) mcr |= UART_MCR_LOOP; - mcr |= up->mcr; - serial_out(up, UART_MCR, mcr); + pm_runtime_get_sync(&up->pdev->dev); + up->mcr = serial_in(up, UART_MCR); + up->mcr |= mcr; + serial_out(up, UART_MCR, up->mcr); + pm_runtime_put(&up->pdev->dev); } static void serial_omap_break_ctl(struct uart_port *port, int break_state) @@ -442,7 +482,8 @@ static void serial_omap_break_ctl(struct uart_port *port, int break_state) struct uart_omap_port *up = (struct uart_omap_port *)port; unsigned long flags = 0; - dev_dbg(up->port.dev, "serial_omap_break_ctl+%d\n", up->pdev->id); + dev_dbg(up->port.dev, "serial_omap_break_ctl+%d\n", up->port.line); + pm_runtime_get_sync(&up->pdev->dev); spin_lock_irqsave(&up->port.lock, flags); if (break_state == -1) up->lcr |= UART_LCR_SBC; @@ -450,6 +491,7 @@ static void serial_omap_break_ctl(struct uart_port *port, int break_state) up->lcr &= ~UART_LCR_SBC; serial_out(up, UART_LCR, up->lcr); spin_unlock_irqrestore(&up->port.lock, flags); + pm_runtime_put(&up->pdev->dev); } static int serial_omap_startup(struct uart_port *port) @@ -466,8 +508,9 @@ static int serial_omap_startup(struct uart_port *port) if (retval) return retval; - dev_dbg(up->port.dev, "serial_omap_startup+%d\n", up->pdev->id); + dev_dbg(up->port.dev, "serial_omap_startup+%d\n", up->port.line); + pm_runtime_get_sync(&up->pdev->dev); /* * Clear the FIFO buffers and disable them. * (they will be reenabled in set_termios()) @@ -505,8 +548,8 @@ static int serial_omap_startup(struct uart_port *port) (dma_addr_t *)&(up->uart_dma.tx_buf_dma_phys), 0); init_timer(&(up->uart_dma.rx_timer)); - up->uart_dma.rx_timer.function = serial_omap_rx_timeout; - up->uart_dma.rx_timer.data = up->pdev->id; + up->uart_dma.rx_timer.function = serial_omap_rxdma_poll; + up->uart_dma.rx_timer.data = up->port.line; /* Currently the buffer size is 4KB. Can increase it */ up->uart_dma.rx_buf = dma_alloc_coherent(NULL, up->uart_dma.rx_buf_size, @@ -523,6 +566,8 @@ static int serial_omap_startup(struct uart_port *port) /* Enable module level wake up */ serial_out(up, UART_OMAP_WER, OMAP_UART_WER_MOD_WKUP); + pm_runtime_mark_last_busy(&up->pdev->dev); + pm_runtime_put_autosuspend(&up->pdev->dev); up->port_activity = jiffies; return 0; } @@ -532,7 +577,9 @@ static void serial_omap_shutdown(struct uart_port *port) struct uart_omap_port *up = (struct uart_omap_port *)port; unsigned long flags = 0; - dev_dbg(up->port.dev, "serial_omap_shutdown+%d\n", up->pdev->id); + dev_dbg(up->port.dev, "serial_omap_shutdown+%d\n", up->port.line); + + pm_runtime_get_sync(&up->pdev->dev); /* * Disable interrupts from this port */ @@ -566,6 +613,8 @@ static void serial_omap_shutdown(struct uart_port *port) up->uart_dma.rx_buf_dma_phys); up->uart_dma.rx_buf = NULL; } + + pm_runtime_put(&up->pdev->dev); free_irq(up->port.irq, up); } @@ -573,8 +622,6 @@ static inline void serial_omap_configure_xonxoff (struct uart_omap_port *up, struct ktermios *termios) { - unsigned char efr = 0; - up->lcr = serial_in(up, UART_LCR); serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); up->efr = serial_in(up, UART_EFR); @@ -584,8 +631,7 @@ serial_omap_configure_xonxoff serial_out(up, UART_XOFF1, termios->c_cc[VSTOP]); /* clear SW control mode bits */ - efr = up->efr; - efr &= OMAP_UART_SW_CLR; + up->efr &= OMAP_UART_SW_CLR; /* * IXON Flag: @@ -593,7 +639,7 @@ serial_omap_configure_xonxoff * Transmit XON1, XOFF1 */ if (termios->c_iflag & IXON) - efr |= OMAP_UART_SW_TX; + up->efr |= OMAP_UART_SW_TX; /* * IXOFF Flag: @@ -601,7 +647,7 @@ serial_omap_configure_xonxoff * Receiver compares XON1, XOFF1. */ if (termios->c_iflag & IXOFF) - efr |= OMAP_UART_SW_RX; + up->efr |= OMAP_UART_SW_RX; serial_out(up, UART_EFR, up->efr | UART_EFR_ECB); serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A); @@ -624,13 +670,21 @@ serial_omap_configure_xonxoff * load the new software flow control mode IXON or IXOFF * and restore the UARTi.EFR_REG[4] ENHANCED_EN value. */ - serial_out(up, UART_EFR, efr | UART_EFR_SCD); + serial_out(up, UART_EFR, up->efr | UART_EFR_SCD); serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A); serial_out(up, UART_MCR, up->mcr & ~UART_MCR_TCRTLR); serial_out(up, UART_LCR, up->lcr); } +static void serial_omap_uart_qos_work(struct work_struct *work) +{ + struct uart_omap_port *up = container_of(work, struct uart_omap_port, + qos_work); + + pm_qos_update_request(&up->pm_qos_request, up->latency); +} + static void serial_omap_set_termios(struct uart_port *port, struct ktermios *termios, struct ktermios *old) @@ -671,6 +725,16 @@ serial_omap_set_termios(struct uart_port *port, struct ktermios *termios, baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/13); quot = serial_omap_get_divisor(port, baud); + /* calculate wakeup latency constraint */ + up->calc_latency = (1000000 * up->port.fifosize) / + (1000 * baud / 8); + up->latency = up->calc_latency; + schedule_work(&up->qos_work); + + up->dll = quot & 0xff; + up->dlh = quot >> 8; + up->mdr1 = UART_OMAP_MDR1_DISABLE; + up->fcr = UART_FCR_R_TRIG_01 | UART_FCR_T_TRIG_01 | UART_FCR_ENABLE_FIFO; if (up->use_dma) @@ -680,6 +744,7 @@ serial_omap_set_termios(struct uart_port *port, struct ktermios *termios, * Ok, we're now changing the port state. Do it with * interrupts disabled. */ + pm_runtime_get_sync(&up->pdev->dev); spin_lock_irqsave(&up->port.lock, flags); /* @@ -723,6 +788,8 @@ serial_omap_set_termios(struct uart_port *port, struct ktermios *termios, up->ier |= UART_IER_MSI; serial_out(up, UART_IER, up->ier); serial_out(up, UART_LCR, cval); /* reset DLAB */ + up->lcr = cval; + up->scr = OMAP_UART_SCR_TX_EMPTY; /* FIFOs and DMA Settings */ @@ -749,17 +816,22 @@ serial_omap_set_termios(struct uart_port *port, struct ktermios *termios, if (up->use_dma) { serial_out(up, UART_TI752_TLR, 0); - serial_out(up, UART_OMAP_SCR, - (UART_FCR_TRIGGER_4 | UART_FCR_TRIGGER_8)); + up->scr |= (UART_FCR_TRIGGER_4 | UART_FCR_TRIGGER_8); } + serial_out(up, UART_OMAP_SCR, up->scr); + serial_out(up, UART_EFR, up->efr); serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A); serial_out(up, UART_MCR, up->mcr); /* Protocol, Baud Rate, and Interrupt Settings */ - serial_out(up, UART_OMAP_MDR1, UART_OMAP_MDR1_DISABLE); + if (up->errata & UART_ERRATA_i202_MDR1_ACCESS) + serial_omap_mdr1_errataset(up, up->mdr1); + else + serial_out(up, UART_OMAP_MDR1, up->mdr1); + serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); up->efr = serial_in(up, UART_EFR); @@ -769,8 +841,8 @@ serial_omap_set_termios(struct uart_port *port, struct ktermios *termios, serial_out(up, UART_IER, 0); serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); - serial_out(up, UART_DLL, quot & 0xff); /* LS of divisor */ - serial_out(up, UART_DLM, quot >> 8); /* MS of divisor */ + serial_out(up, UART_DLL, up->dll); /* LS of divisor */ + serial_out(up, UART_DLM, up->dlh); /* MS of divisor */ serial_out(up, UART_LCR, 0); serial_out(up, UART_IER, up->ier); @@ -780,9 +852,14 @@ serial_omap_set_termios(struct uart_port *port, struct ktermios *termios, serial_out(up, UART_LCR, cval); if (baud > 230400 && baud != 3000000) - serial_out(up, UART_OMAP_MDR1, UART_OMAP_MDR1_13X_MODE); + up->mdr1 = UART_OMAP_MDR1_13X_MODE; else - serial_out(up, UART_OMAP_MDR1, UART_OMAP_MDR1_16X_MODE); + up->mdr1 = UART_OMAP_MDR1_16X_MODE; + + if (up->errata & UART_ERRATA_i202_MDR1_ACCESS) + serial_omap_mdr1_errataset(up, up->mdr1); + else + serial_out(up, UART_OMAP_MDR1, up->mdr1); /* Hardware Flow Control Configuration */ @@ -809,7 +886,8 @@ serial_omap_set_termios(struct uart_port *port, struct ktermios *termios, serial_omap_configure_xonxoff(up, termios); spin_unlock_irqrestore(&up->port.lock, flags); - dev_dbg(up->port.dev, "serial_omap_set_termios+%d\n", up->pdev->id); + pm_runtime_put(&up->pdev->dev); + dev_dbg(up->port.dev, "serial_omap_set_termios+%d\n", up->port.line); } static void @@ -819,7 +897,9 @@ serial_omap_pm(struct uart_port *port, unsigned int state, struct uart_omap_port *up = (struct uart_omap_port *)port; unsigned char efr; - dev_dbg(up->port.dev, "serial_omap_pm+%d\n", up->pdev->id); + dev_dbg(up->port.dev, "serial_omap_pm+%d\n", up->port.line); + + pm_runtime_get_sync(&up->pdev->dev); serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); efr = serial_in(up, UART_EFR); serial_out(up, UART_EFR, efr | UART_EFR_ECB); @@ -829,6 +909,15 @@ serial_omap_pm(struct uart_port *port, unsigned int state, serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); serial_out(up, UART_EFR, efr); serial_out(up, UART_LCR, 0); + + if (!device_may_wakeup(&up->pdev->dev)) { + if (!state) + pm_runtime_forbid(&up->pdev->dev); + else + pm_runtime_allow(&up->pdev->dev); + } + + pm_runtime_put(&up->pdev->dev); } static void serial_omap_release_port(struct uart_port *port) @@ -847,7 +936,7 @@ static void serial_omap_config_port(struct uart_port *port, int flags) struct uart_omap_port *up = (struct uart_omap_port *)port; dev_dbg(up->port.dev, "serial_omap_config_port+%d\n", - up->pdev->id); + up->port.line); up->port.type = PORT_OMAP; } @@ -864,7 +953,7 @@ serial_omap_type(struct uart_port *port) { struct uart_omap_port *up = (struct uart_omap_port *)port; - dev_dbg(up->port.dev, "serial_omap_type+%d\n", up->pdev->id); + dev_dbg(up->port.dev, "serial_omap_type+%d\n", up->port.line); return up->name; } @@ -906,19 +995,26 @@ static inline void wait_for_xmitr(struct uart_omap_port *up) static void serial_omap_poll_put_char(struct uart_port *port, unsigned char ch) { struct uart_omap_port *up = (struct uart_omap_port *)port; + + pm_runtime_get_sync(&up->pdev->dev); wait_for_xmitr(up); serial_out(up, UART_TX, ch); + pm_runtime_put(&up->pdev->dev); } static int serial_omap_poll_get_char(struct uart_port *port) { struct uart_omap_port *up = (struct uart_omap_port *)port; - unsigned int status = serial_in(up, UART_LSR); + unsigned int status; + pm_runtime_get_sync(&up->pdev->dev); + status = serial_in(up, UART_LSR); if (!(status & UART_LSR_DR)) return NO_POLL_CHAR; - return serial_in(up, UART_RX); + status = serial_in(up, UART_RX); + pm_runtime_put(&up->pdev->dev); + return status; } #endif /* CONFIG_CONSOLE_POLL */ @@ -946,6 +1042,8 @@ serial_omap_console_write(struct console *co, const char *s, unsigned int ier; int locked = 1; + pm_runtime_get_sync(&up->pdev->dev); + local_irq_save(flags); if (up->port.sysrq) locked = 0; @@ -978,6 +1076,8 @@ serial_omap_console_write(struct console *co, const char *s, if (up->msr_saved_flags) check_modem_status(up); + pm_runtime_mark_last_busy(&up->pdev->dev); + pm_runtime_put_autosuspend(&up->pdev->dev); if (locked) spin_unlock(&up->port.lock); local_irq_restore(flags); @@ -1014,7 +1114,7 @@ static struct console serial_omap_console = { static void serial_omap_add_console_port(struct uart_omap_port *up) { - serial_omap_console_ports[up->pdev->id] = up; + serial_omap_console_ports[up->port.line] = up; } #define OMAP_CONSOLE (&serial_omap_console) @@ -1060,26 +1160,30 @@ static struct uart_driver serial_omap_reg = { .cons = OMAP_CONSOLE, }; -static int -serial_omap_suspend(struct platform_device *pdev, pm_message_t state) +#ifdef CONFIG_SUSPEND +static int serial_omap_suspend(struct device *dev) { - struct uart_omap_port *up = platform_get_drvdata(pdev); + struct uart_omap_port *up = dev_get_drvdata(dev); - if (up) + if (up) { uart_suspend_port(&serial_omap_reg, &up->port); + flush_work_sync(&up->qos_work); + } + return 0; } -static int serial_omap_resume(struct platform_device *dev) +static int serial_omap_resume(struct device *dev) { - struct uart_omap_port *up = platform_get_drvdata(dev); + struct uart_omap_port *up = dev_get_drvdata(dev); if (up) uart_resume_port(&serial_omap_reg, &up->port); return 0; } +#endif -static void serial_omap_rx_timeout(unsigned long uart_no) +static void serial_omap_rxdma_poll(unsigned long uart_no) { struct uart_omap_port *up = ui[uart_no]; unsigned int curr_dma_pos, curr_transmitted_size; @@ -1089,9 +1193,9 @@ static void serial_omap_rx_timeout(unsigned long uart_no) if ((curr_dma_pos == up->uart_dma.prev_rx_dma_pos) || (curr_dma_pos == 0)) { if (jiffies_to_msecs(jiffies - up->port_activity) < - RX_TIMEOUT) { + up->uart_dma.rx_timeout) { mod_timer(&up->uart_dma.rx_timer, jiffies + - usecs_to_jiffies(up->uart_dma.rx_timeout)); + usecs_to_jiffies(up->uart_dma.rx_poll_rate)); } else { serial_omap_stop_rxdma(up); up->ier |= (UART_IER_RDI | UART_IER_RLSI); @@ -1120,7 +1224,7 @@ static void serial_omap_rx_timeout(unsigned long uart_no) } } else { mod_timer(&up->uart_dma.rx_timer, jiffies + - usecs_to_jiffies(up->uart_dma.rx_timeout)); + usecs_to_jiffies(up->uart_dma.rx_poll_rate)); } up->port_activity = jiffies; } @@ -1135,6 +1239,7 @@ static int serial_omap_start_rxdma(struct uart_omap_port *up) int ret = 0; if (up->uart_dma.rx_dma_channel == -1) { + pm_runtime_get_sync(&up->pdev->dev); ret = omap_request_dma(up->uart_dma.uart_dma_rx, "UART Rx DMA", (void *)uart_rx_dma_callback, up, @@ -1158,7 +1263,7 @@ static int serial_omap_start_rxdma(struct uart_omap_port *up) /* FIXME: Cache maintenance needed here? */ omap_start_dma(up->uart_dma.rx_dma_channel); mod_timer(&up->uart_dma.rx_timer, jiffies + - usecs_to_jiffies(up->uart_dma.rx_timeout)); + usecs_to_jiffies(up->uart_dma.rx_poll_rate)); up->uart_dma.rx_dma_used = true; return ret; } @@ -1221,6 +1326,19 @@ static void uart_tx_dma_callback(int lch, u16 ch_status, void *data) return; } +static struct omap_uart_port_info *of_get_uart_port_info(struct device *dev) +{ + struct omap_uart_port_info *omap_up_info; + + omap_up_info = devm_kzalloc(dev, sizeof(*omap_up_info), GFP_KERNEL); + if (!omap_up_info) + return NULL; /* out of memory */ + + of_property_read_u32(dev->of_node, "clock-frequency", + &omap_up_info->uartclk); + return omap_up_info; +} + static int serial_omap_probe(struct platform_device *pdev) { struct uart_omap_port *up; @@ -1228,6 +1346,9 @@ static int serial_omap_probe(struct platform_device *pdev) struct omap_uart_port_info *omap_up_info = pdev->dev.platform_data; int ret = -ENOSPC; + if (pdev->dev.of_node) + omap_up_info = of_get_uart_port_info(&pdev->dev); + mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!mem) { dev_err(&pdev->dev, "no mem resource?\n"); @@ -1263,7 +1384,6 @@ static int serial_omap_probe(struct platform_device *pdev) ret = -ENOMEM; goto do_release_region; } - sprintf(up->name, "OMAP UART%d", pdev->id); up->pdev = pdev; up->port.dev = &pdev->dev; up->port.type = PORT_OMAP; @@ -1273,34 +1393,74 @@ static int serial_omap_probe(struct platform_device *pdev) up->port.regshift = 2; up->port.fifosize = 64; up->port.ops = &serial_omap_pops; - up->port.line = pdev->id; - up->port.membase = omap_up_info->membase; - up->port.mapbase = omap_up_info->mapbase; + if (pdev->dev.of_node) + up->port.line = of_alias_get_id(pdev->dev.of_node, "serial"); + else + up->port.line = pdev->id; + + if (up->port.line < 0) { + dev_err(&pdev->dev, "failed to get alias/pdev id, errno %d\n", + up->port.line); + ret = -ENODEV; + goto err; + } + + sprintf(up->name, "OMAP UART%d", up->port.line); + up->port.mapbase = mem->start; + up->port.membase = ioremap(mem->start, resource_size(mem)); + if (!up->port.membase) { + dev_err(&pdev->dev, "can't ioremap UART\n"); + ret = -ENOMEM; + goto err; + } + up->port.flags = omap_up_info->flags; - up->port.irqflags = omap_up_info->irqflags; up->port.uartclk = omap_up_info->uartclk; + if (!up->port.uartclk) { + up->port.uartclk = DEFAULT_CLK_SPEED; + dev_warn(&pdev->dev, "No clock speed specified: using default:" + "%d\n", DEFAULT_CLK_SPEED); + } up->uart_dma.uart_base = mem->start; + up->errata = omap_up_info->errata; if (omap_up_info->dma_enabled) { up->uart_dma.uart_dma_tx = dma_tx->start; up->uart_dma.uart_dma_rx = dma_rx->start; up->use_dma = 1; - up->uart_dma.rx_buf_size = 4096; - up->uart_dma.rx_timeout = 2; + up->uart_dma.rx_buf_size = omap_up_info->dma_rx_buf_size; + up->uart_dma.rx_timeout = omap_up_info->dma_rx_timeout; + up->uart_dma.rx_poll_rate = omap_up_info->dma_rx_poll_rate; spin_lock_init(&(up->uart_dma.tx_lock)); spin_lock_init(&(up->uart_dma.rx_lock)); up->uart_dma.tx_dma_channel = OMAP_UART_DMA_CH_FREE; up->uart_dma.rx_dma_channel = OMAP_UART_DMA_CH_FREE; } - ui[pdev->id] = up; + up->latency = PM_QOS_CPU_DMA_LAT_DEFAULT_VALUE; + up->calc_latency = PM_QOS_CPU_DMA_LAT_DEFAULT_VALUE; + pm_qos_add_request(&up->pm_qos_request, + PM_QOS_CPU_DMA_LATENCY, up->latency); + serial_omap_uart_wq = create_singlethread_workqueue(up->name); + INIT_WORK(&up->qos_work, serial_omap_uart_qos_work); + + pm_runtime_use_autosuspend(&pdev->dev); + pm_runtime_set_autosuspend_delay(&pdev->dev, + omap_up_info->autosuspend_timeout); + + pm_runtime_irq_safe(&pdev->dev); + pm_runtime_enable(&pdev->dev); + pm_runtime_get_sync(&pdev->dev); + + ui[up->port.line] = up; serial_omap_add_console_port(up); ret = uart_add_one_port(&serial_omap_reg, &up->port); if (ret != 0) goto do_release_region; + pm_runtime_put(&pdev->dev); platform_set_drvdata(pdev, up); return 0; err: @@ -1315,22 +1475,168 @@ static int serial_omap_remove(struct platform_device *dev) { struct uart_omap_port *up = platform_get_drvdata(dev); - platform_set_drvdata(dev, NULL); if (up) { + pm_runtime_disable(&up->pdev->dev); uart_remove_one_port(&serial_omap_reg, &up->port); + pm_qos_remove_request(&up->pm_qos_request); + kfree(up); } + + platform_set_drvdata(dev, NULL); return 0; } +/* + * Work Around for Errata i202 (2430, 3430, 3630, 4430 and 4460) + * The access to uart register after MDR1 Access + * causes UART to corrupt data. + * + * Need a delay = + * 5 L4 clock cycles + 5 UART functional clock cycle (@48MHz = ~0.2uS) + * give 10 times as much + */ +static void serial_omap_mdr1_errataset(struct uart_omap_port *up, u8 mdr1) +{ + u8 timeout = 255; + + serial_out(up, UART_OMAP_MDR1, mdr1); + udelay(2); + serial_out(up, UART_FCR, up->fcr | UART_FCR_CLEAR_XMIT | + UART_FCR_CLEAR_RCVR); + /* + * Wait for FIFO to empty: when empty, RX_FIFO_E bit is 0 and + * TX_FIFO_E bit is 1. + */ + while (UART_LSR_THRE != (serial_in(up, UART_LSR) & + (UART_LSR_THRE | UART_LSR_DR))) { + timeout--; + if (!timeout) { + /* Should *never* happen. we warn and carry on */ + dev_crit(&up->pdev->dev, "Errata i202: timedout %x\n", + serial_in(up, UART_LSR)); + break; + } + udelay(1); + } +} + +static void serial_omap_restore_context(struct uart_omap_port *up) +{ + if (up->errata & UART_ERRATA_i202_MDR1_ACCESS) + serial_omap_mdr1_errataset(up, UART_OMAP_MDR1_DISABLE); + else + serial_out(up, UART_OMAP_MDR1, UART_OMAP_MDR1_DISABLE); + + serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); /* Config B mode */ + serial_out(up, UART_EFR, UART_EFR_ECB); + serial_out(up, UART_LCR, 0x0); /* Operational mode */ + serial_out(up, UART_IER, 0x0); + serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); /* Config B mode */ + serial_out(up, UART_DLL, up->dll); + serial_out(up, UART_DLM, up->dlh); + serial_out(up, UART_LCR, 0x0); /* Operational mode */ + serial_out(up, UART_IER, up->ier); + serial_out(up, UART_FCR, up->fcr); + serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A); + serial_out(up, UART_MCR, up->mcr); + serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); /* Config B mode */ + serial_out(up, UART_OMAP_SCR, up->scr); + serial_out(up, UART_EFR, up->efr); + serial_out(up, UART_LCR, up->lcr); + if (up->errata & UART_ERRATA_i202_MDR1_ACCESS) + serial_omap_mdr1_errataset(up, up->mdr1); + else + serial_out(up, UART_OMAP_MDR1, up->mdr1); +} + +#ifdef CONFIG_PM_RUNTIME +static int serial_omap_runtime_suspend(struct device *dev) +{ + struct uart_omap_port *up = dev_get_drvdata(dev); + struct omap_uart_port_info *pdata = dev->platform_data; + + if (!up) + return -EINVAL; + + if (!pdata || !pdata->enable_wakeup) + return 0; + + if (pdata->get_context_loss_count) + up->context_loss_cnt = pdata->get_context_loss_count(dev); + + if (device_may_wakeup(dev)) { + if (!up->wakeups_enabled) { + pdata->enable_wakeup(up->pdev, true); + up->wakeups_enabled = true; + } + } else { + if (up->wakeups_enabled) { + pdata->enable_wakeup(up->pdev, false); + up->wakeups_enabled = false; + } + } + + /* Errata i291 */ + if (up->use_dma && pdata->set_forceidle && + (up->errata & UART_ERRATA_i291_DMA_FORCEIDLE)) + pdata->set_forceidle(up->pdev); + + up->latency = PM_QOS_CPU_DMA_LAT_DEFAULT_VALUE; + schedule_work(&up->qos_work); + + return 0; +} + +static int serial_omap_runtime_resume(struct device *dev) +{ + struct uart_omap_port *up = dev_get_drvdata(dev); + struct omap_uart_port_info *pdata = dev->platform_data; + + if (up) { + if (pdata->get_context_loss_count) { + u32 loss_cnt = pdata->get_context_loss_count(dev); + + if (up->context_loss_cnt != loss_cnt) + serial_omap_restore_context(up); + } + + /* Errata i291 */ + if (up->use_dma && pdata->set_noidle && + (up->errata & UART_ERRATA_i291_DMA_FORCEIDLE)) + pdata->set_noidle(up->pdev); + + up->latency = up->calc_latency; + schedule_work(&up->qos_work); + } + + return 0; +} +#endif + +static const struct dev_pm_ops serial_omap_dev_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(serial_omap_suspend, serial_omap_resume) + SET_RUNTIME_PM_OPS(serial_omap_runtime_suspend, + serial_omap_runtime_resume, NULL) +}; + +#if defined(CONFIG_OF) +static const struct of_device_id omap_serial_of_match[] = { + { .compatible = "ti,omap2-uart" }, + { .compatible = "ti,omap3-uart" }, + { .compatible = "ti,omap4-uart" }, + {}, +}; +MODULE_DEVICE_TABLE(of, omap_serial_of_match); +#endif + static struct platform_driver serial_omap_driver = { .probe = serial_omap_probe, .remove = serial_omap_remove, - - .suspend = serial_omap_suspend, - .resume = serial_omap_resume, .driver = { .name = DRIVER_NAME, + .pm = &serial_omap_dev_pm_ops, + .of_match_table = of_match_ptr(omap_serial_of_match), }, }; diff --git a/drivers/tty/serial/pch_uart.c b/drivers/tty/serial/pch_uart.c index d6aba8c087e4..de0f613ed6f5 100644 --- a/drivers/tty/serial/pch_uart.c +++ b/drivers/tty/serial/pch_uart.c @@ -25,6 +25,9 @@ #include <linux/interrupt.h> #include <linux/io.h> #include <linux/dmi.h> +#include <linux/console.h> +#include <linux/nmi.h> +#include <linux/delay.h> #include <linux/dmaengine.h> #include <linux/pch_dma.h> @@ -198,6 +201,10 @@ enum { #define PCI_VENDOR_ID_ROHM 0x10DB +#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE) + +#define DEFAULT_BAUD_RATE 1843200 /* 1.8432MHz */ + struct pch_uart_buffer { unsigned char *buf; int size; @@ -276,6 +283,9 @@ static struct pch_uart_driver_data drv_dat[] = { [pch_ml7831_uart1] = {PCH_UART_2LINE, 1}, }; +#ifdef CONFIG_SERIAL_PCH_UART_CONSOLE +static struct eg20t_port *pch_uart_ports[PCH_UART_NR]; +#endif static unsigned int default_baud = 9600; static const int trigger_level_256[4] = { 1, 64, 128, 224 }; static const int trigger_level_64[4] = { 1, 16, 32, 56 }; @@ -1385,6 +1395,143 @@ static struct uart_ops pch_uart_ops = { .verify_port = pch_uart_verify_port }; +#ifdef CONFIG_SERIAL_PCH_UART_CONSOLE + +/* + * Wait for transmitter & holding register to empty + */ +static void wait_for_xmitr(struct eg20t_port *up, int bits) +{ + unsigned int status, tmout = 10000; + + /* Wait up to 10ms for the character(s) to be sent. */ + for (;;) { + status = ioread8(up->membase + UART_LSR); + + if ((status & bits) == bits) + break; + if (--tmout == 0) + break; + udelay(1); + } + + /* Wait up to 1s for flow control if necessary */ + if (up->port.flags & UPF_CONS_FLOW) { + unsigned int tmout; + for (tmout = 1000000; tmout; tmout--) { + unsigned int msr = ioread8(up->membase + UART_MSR); + if (msr & UART_MSR_CTS) + break; + udelay(1); + touch_nmi_watchdog(); + } + } +} + +static void pch_console_putchar(struct uart_port *port, int ch) +{ + struct eg20t_port *priv = + container_of(port, struct eg20t_port, port); + + wait_for_xmitr(priv, UART_LSR_THRE); + iowrite8(ch, priv->membase + PCH_UART_THR); +} + +/* + * Print a string to the serial port trying not to disturb + * any possible real use of the port... + * + * The console_lock must be held when we get here. + */ +static void +pch_console_write(struct console *co, const char *s, unsigned int count) +{ + struct eg20t_port *priv; + + unsigned long flags; + u8 ier; + int locked = 1; + + priv = pch_uart_ports[co->index]; + + touch_nmi_watchdog(); + + local_irq_save(flags); + if (priv->port.sysrq) { + /* serial8250_handle_port() already took the lock */ + locked = 0; + } else if (oops_in_progress) { + locked = spin_trylock(&priv->port.lock); + } else + spin_lock(&priv->port.lock); + + /* + * First save the IER then disable the interrupts + */ + ier = ioread8(priv->membase + UART_IER); + + pch_uart_hal_disable_interrupt(priv, PCH_UART_HAL_ALL_INT); + + uart_console_write(&priv->port, s, count, pch_console_putchar); + + /* + * Finally, wait for transmitter to become empty + * and restore the IER + */ + wait_for_xmitr(priv, BOTH_EMPTY); + iowrite8(ier, priv->membase + UART_IER); + + if (locked) + spin_unlock(&priv->port.lock); + local_irq_restore(flags); +} + +static int __init pch_console_setup(struct console *co, char *options) +{ + struct uart_port *port; + int baud = 9600; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + + /* + * Check whether an invalid uart number has been specified, and + * if so, search for the first available port that does have + * console support. + */ + if (co->index >= PCH_UART_NR) + co->index = 0; + port = &pch_uart_ports[co->index]->port; + + if (!port || (!port->iobase && !port->membase)) + return -ENODEV; + + /* setup uartclock */ + port->uartclk = DEFAULT_BAUD_RATE; + + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + + return uart_set_options(port, co, baud, parity, bits, flow); +} + +static struct uart_driver pch_uart_driver; + +static struct console pch_console = { + .name = PCH_UART_DRIVER_DEVICE, + .write = pch_console_write, + .device = uart_console_device, + .setup = pch_console_setup, + .flags = CON_PRINTBUFFER | CON_ANYTIME, + .index = -1, + .data = &pch_uart_driver, +}; + +#define PCH_CONSOLE (&pch_console) +#else +#define PCH_CONSOLE NULL +#endif + static struct uart_driver pch_uart_driver = { .owner = THIS_MODULE, .driver_name = KBUILD_MODNAME, @@ -1392,6 +1539,7 @@ static struct uart_driver pch_uart_driver = { .major = 0, .minor = 0, .nr = PCH_UART_NR, + .cons = PCH_CONSOLE, }; static struct eg20t_port *pch_uart_init_port(struct pci_dev *pdev, @@ -1418,7 +1566,7 @@ static struct eg20t_port *pch_uart_init_port(struct pci_dev *pdev, if (!rxbuf) goto init_port_free_txbuf; - base_baud = 1843200; /* 1.8432MHz */ + base_baud = DEFAULT_BAUD_RATE; /* quirk for CM-iTC board */ board_name = dmi_get_system_info(DMI_BOARD_NAME); @@ -1468,6 +1616,9 @@ static struct eg20t_port *pch_uart_init_port(struct pci_dev *pdev, pci_set_drvdata(pdev, priv); pch_uart_hal_request(pdev, fifosize, base_baud); +#ifdef CONFIG_SERIAL_PCH_UART_CONSOLE + pch_uart_ports[board->line_no] = priv; +#endif ret = uart_add_one_port(&pch_uart_driver, &priv->port); if (ret < 0) goto init_port_hal_free; @@ -1475,6 +1626,9 @@ static struct eg20t_port *pch_uart_init_port(struct pci_dev *pdev, return priv; init_port_hal_free: +#ifdef CONFIG_SERIAL_PCH_UART_CONSOLE + pch_uart_ports[board->line_no] = NULL; +#endif free_page((unsigned long)rxbuf); init_port_free_txbuf: kfree(priv); @@ -1497,6 +1651,10 @@ static void pch_uart_pci_remove(struct pci_dev *pdev) priv = (struct eg20t_port *)pci_get_drvdata(pdev); pci_disable_msi(pdev); + +#ifdef CONFIG_SERIAL_PCH_UART_CONSOLE + pch_uart_ports[priv->port.line] = NULL; +#endif pch_uart_exit_port(priv); pci_disable_device(pdev); kfree(priv); diff --git a/drivers/tty/serial/s3c2410.c b/drivers/tty/serial/s3c2410.c deleted file mode 100644 index b1d7e7c1849d..000000000000 --- a/drivers/tty/serial/s3c2410.c +++ /dev/null @@ -1,115 +0,0 @@ -/* - * Driver for Samsung S3C2410 SoC onboard UARTs. - * - * Ben Dooks, Copyright (c) 2003-2008 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/module.h> -#include <linux/ioport.h> -#include <linux/io.h> -#include <linux/platform_device.h> -#include <linux/init.h> -#include <linux/serial_core.h> -#include <linux/serial.h> - -#include <asm/irq.h> -#include <mach/hardware.h> - -#include <plat/regs-serial.h> -#include <mach/regs-gpio.h> - -#include "samsung.h" - -static int s3c2410_serial_setsource(struct uart_port *port, - struct s3c24xx_uart_clksrc *clk) -{ - unsigned long ucon = rd_regl(port, S3C2410_UCON); - - if (strcmp(clk->name, "uclk") == 0) - ucon |= S3C2410_UCON_UCLK; - else - ucon &= ~S3C2410_UCON_UCLK; - - wr_regl(port, S3C2410_UCON, ucon); - return 0; -} - -static int s3c2410_serial_getsource(struct uart_port *port, - struct s3c24xx_uart_clksrc *clk) -{ - unsigned long ucon = rd_regl(port, S3C2410_UCON); - - clk->divisor = 1; - clk->name = (ucon & S3C2410_UCON_UCLK) ? "uclk" : "pclk"; - - return 0; -} - -static int s3c2410_serial_resetport(struct uart_port *port, - struct s3c2410_uartcfg *cfg) -{ - dbg("s3c2410_serial_resetport: port=%p (%08lx), cfg=%p\n", - port, port->mapbase, cfg); - - wr_regl(port, S3C2410_UCON, cfg->ucon); - wr_regl(port, S3C2410_ULCON, cfg->ulcon); - - /* reset both fifos */ - - wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH); - wr_regl(port, S3C2410_UFCON, cfg->ufcon); - - return 0; -} - -static struct s3c24xx_uart_info s3c2410_uart_inf = { - .name = "Samsung S3C2410 UART", - .type = PORT_S3C2410, - .fifosize = 16, - .rx_fifomask = S3C2410_UFSTAT_RXMASK, - .rx_fifoshift = S3C2410_UFSTAT_RXSHIFT, - .rx_fifofull = S3C2410_UFSTAT_RXFULL, - .tx_fifofull = S3C2410_UFSTAT_TXFULL, - .tx_fifomask = S3C2410_UFSTAT_TXMASK, - .tx_fifoshift = S3C2410_UFSTAT_TXSHIFT, - .get_clksrc = s3c2410_serial_getsource, - .set_clksrc = s3c2410_serial_setsource, - .reset_port = s3c2410_serial_resetport, -}; - -static int s3c2410_serial_probe(struct platform_device *dev) -{ - return s3c24xx_serial_probe(dev, &s3c2410_uart_inf); -} - -static struct platform_driver s3c2410_serial_driver = { - .probe = s3c2410_serial_probe, - .remove = __devexit_p(s3c24xx_serial_remove), - .driver = { - .name = "s3c2410-uart", - .owner = THIS_MODULE, - }, -}; - -static int __init s3c2410_serial_init(void) -{ - return s3c24xx_serial_init(&s3c2410_serial_driver, &s3c2410_uart_inf); -} - -static void __exit s3c2410_serial_exit(void) -{ - platform_driver_unregister(&s3c2410_serial_driver); -} - -module_init(s3c2410_serial_init); -module_exit(s3c2410_serial_exit); - -MODULE_LICENSE("GPL v2"); -MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>"); -MODULE_DESCRIPTION("Samsung S3C2410 SoC Serial port driver"); -MODULE_ALIAS("platform:s3c2410-uart"); diff --git a/drivers/tty/serial/s3c2412.c b/drivers/tty/serial/s3c2412.c deleted file mode 100644 index 2234bf9ced45..000000000000 --- a/drivers/tty/serial/s3c2412.c +++ /dev/null @@ -1,149 +0,0 @@ -/* - * Driver for Samsung S3C2412 and S3C2413 SoC onboard UARTs. - * - * Ben Dooks, Copyright (c) 2003-2008 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/module.h> -#include <linux/ioport.h> -#include <linux/io.h> -#include <linux/platform_device.h> -#include <linux/init.h> -#include <linux/serial_core.h> -#include <linux/serial.h> - -#include <asm/irq.h> -#include <mach/hardware.h> - -#include <plat/regs-serial.h> -#include <mach/regs-gpio.h> - -#include "samsung.h" - -static int s3c2412_serial_setsource(struct uart_port *port, - struct s3c24xx_uart_clksrc *clk) -{ - unsigned long ucon = rd_regl(port, S3C2410_UCON); - - ucon &= ~S3C2412_UCON_CLKMASK; - - if (strcmp(clk->name, "uclk") == 0) - ucon |= S3C2440_UCON_UCLK; - else if (strcmp(clk->name, "pclk") == 0) - ucon |= S3C2440_UCON_PCLK; - else if (strcmp(clk->name, "usysclk") == 0) - ucon |= S3C2412_UCON_USYSCLK; - else { - printk(KERN_ERR "unknown clock source %s\n", clk->name); - return -EINVAL; - } - - wr_regl(port, S3C2410_UCON, ucon); - return 0; -} - - -static int s3c2412_serial_getsource(struct uart_port *port, - struct s3c24xx_uart_clksrc *clk) -{ - unsigned long ucon = rd_regl(port, S3C2410_UCON); - - switch (ucon & S3C2412_UCON_CLKMASK) { - case S3C2412_UCON_UCLK: - clk->divisor = 1; - clk->name = "uclk"; - break; - - case S3C2412_UCON_PCLK: - case S3C2412_UCON_PCLK2: - clk->divisor = 1; - clk->name = "pclk"; - break; - - case S3C2412_UCON_USYSCLK: - clk->divisor = 1; - clk->name = "usysclk"; - break; - } - - return 0; -} - -static int s3c2412_serial_resetport(struct uart_port *port, - struct s3c2410_uartcfg *cfg) -{ - unsigned long ucon = rd_regl(port, S3C2410_UCON); - - dbg("%s: port=%p (%08lx), cfg=%p\n", - __func__, port, port->mapbase, cfg); - - /* ensure we don't change the clock settings... */ - - ucon &= S3C2412_UCON_CLKMASK; - - wr_regl(port, S3C2410_UCON, ucon | cfg->ucon); - wr_regl(port, S3C2410_ULCON, cfg->ulcon); - - /* reset both fifos */ - - wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH); - wr_regl(port, S3C2410_UFCON, cfg->ufcon); - - return 0; -} - -static struct s3c24xx_uart_info s3c2412_uart_inf = { - .name = "Samsung S3C2412 UART", - .type = PORT_S3C2412, - .fifosize = 64, - .has_divslot = 1, - .rx_fifomask = S3C2440_UFSTAT_RXMASK, - .rx_fifoshift = S3C2440_UFSTAT_RXSHIFT, - .rx_fifofull = S3C2440_UFSTAT_RXFULL, - .tx_fifofull = S3C2440_UFSTAT_TXFULL, - .tx_fifomask = S3C2440_UFSTAT_TXMASK, - .tx_fifoshift = S3C2440_UFSTAT_TXSHIFT, - .get_clksrc = s3c2412_serial_getsource, - .set_clksrc = s3c2412_serial_setsource, - .reset_port = s3c2412_serial_resetport, -}; - -/* device management */ - -static int s3c2412_serial_probe(struct platform_device *dev) -{ - dbg("s3c2440_serial_probe: dev=%p\n", dev); - return s3c24xx_serial_probe(dev, &s3c2412_uart_inf); -} - -static struct platform_driver s3c2412_serial_driver = { - .probe = s3c2412_serial_probe, - .remove = __devexit_p(s3c24xx_serial_remove), - .driver = { - .name = "s3c2412-uart", - .owner = THIS_MODULE, - }, -}; - -static inline int s3c2412_serial_init(void) -{ - return s3c24xx_serial_init(&s3c2412_serial_driver, &s3c2412_uart_inf); -} - -static inline void s3c2412_serial_exit(void) -{ - platform_driver_unregister(&s3c2412_serial_driver); -} - -module_init(s3c2412_serial_init); -module_exit(s3c2412_serial_exit); - -MODULE_DESCRIPTION("Samsung S3C2412,S3C2413 SoC Serial port driver"); -MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>"); -MODULE_LICENSE("GPL v2"); -MODULE_ALIAS("platform:s3c2412-uart"); diff --git a/drivers/tty/serial/s3c2440.c b/drivers/tty/serial/s3c2440.c deleted file mode 100644 index 1d0c324b813f..000000000000 --- a/drivers/tty/serial/s3c2440.c +++ /dev/null @@ -1,178 +0,0 @@ -/* - * Driver for Samsung S3C2440 and S3C2442 SoC onboard UARTs. - * - * Ben Dooks, Copyright (c) 2003-2008 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/module.h> -#include <linux/ioport.h> -#include <linux/io.h> -#include <linux/platform_device.h> -#include <linux/init.h> -#include <linux/serial_core.h> -#include <linux/serial.h> - -#include <asm/irq.h> -#include <mach/hardware.h> - -#include <plat/regs-serial.h> -#include <mach/regs-gpio.h> - -#include "samsung.h" - - -static int s3c2440_serial_setsource(struct uart_port *port, - struct s3c24xx_uart_clksrc *clk) -{ - unsigned long ucon = rd_regl(port, S3C2410_UCON); - - /* todo - proper fclk<>nonfclk switch. */ - - ucon &= ~S3C2440_UCON_CLKMASK; - - if (strcmp(clk->name, "uclk") == 0) - ucon |= S3C2440_UCON_UCLK; - else if (strcmp(clk->name, "pclk") == 0) - ucon |= S3C2440_UCON_PCLK; - else if (strcmp(clk->name, "fclk") == 0) - ucon |= S3C2440_UCON_FCLK; - else { - printk(KERN_ERR "unknown clock source %s\n", clk->name); - return -EINVAL; - } - - wr_regl(port, S3C2410_UCON, ucon); - return 0; -} - - -static int s3c2440_serial_getsource(struct uart_port *port, - struct s3c24xx_uart_clksrc *clk) -{ - unsigned long ucon = rd_regl(port, S3C2410_UCON); - unsigned long ucon0, ucon1, ucon2; - - switch (ucon & S3C2440_UCON_CLKMASK) { - case S3C2440_UCON_UCLK: - clk->divisor = 1; - clk->name = "uclk"; - break; - - case S3C2440_UCON_PCLK: - case S3C2440_UCON_PCLK2: - clk->divisor = 1; - clk->name = "pclk"; - break; - - case S3C2440_UCON_FCLK: - /* the fun of calculating the uart divisors on - * the s3c2440 */ - - ucon0 = __raw_readl(S3C24XX_VA_UART0 + S3C2410_UCON); - ucon1 = __raw_readl(S3C24XX_VA_UART1 + S3C2410_UCON); - ucon2 = __raw_readl(S3C24XX_VA_UART2 + S3C2410_UCON); - - printk("ucons: %08lx, %08lx, %08lx\n", ucon0, ucon1, ucon2); - - ucon0 &= S3C2440_UCON0_DIVMASK; - ucon1 &= S3C2440_UCON1_DIVMASK; - ucon2 &= S3C2440_UCON2_DIVMASK; - - if (ucon0 != 0) { - clk->divisor = ucon0 >> S3C2440_UCON_DIVSHIFT; - clk->divisor += 6; - } else if (ucon1 != 0) { - clk->divisor = ucon1 >> S3C2440_UCON_DIVSHIFT; - clk->divisor += 21; - } else if (ucon2 != 0) { - clk->divisor = ucon2 >> S3C2440_UCON_DIVSHIFT; - clk->divisor += 36; - } else { - /* manual calims 44, seems to be 9 */ - clk->divisor = 9; - } - - clk->name = "fclk"; - break; - } - - return 0; -} - -static int s3c2440_serial_resetport(struct uart_port *port, - struct s3c2410_uartcfg *cfg) -{ - unsigned long ucon = rd_regl(port, S3C2410_UCON); - - dbg("s3c2440_serial_resetport: port=%p (%08lx), cfg=%p\n", - port, port->mapbase, cfg); - - /* ensure we don't change the clock settings... */ - - ucon &= (S3C2440_UCON0_DIVMASK | (3<<10)); - - wr_regl(port, S3C2410_UCON, ucon | cfg->ucon); - wr_regl(port, S3C2410_ULCON, cfg->ulcon); - - /* reset both fifos */ - - wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH); - wr_regl(port, S3C2410_UFCON, cfg->ufcon); - - return 0; -} - -static struct s3c24xx_uart_info s3c2440_uart_inf = { - .name = "Samsung S3C2440 UART", - .type = PORT_S3C2440, - .fifosize = 64, - .rx_fifomask = S3C2440_UFSTAT_RXMASK, - .rx_fifoshift = S3C2440_UFSTAT_RXSHIFT, - .rx_fifofull = S3C2440_UFSTAT_RXFULL, - .tx_fifofull = S3C2440_UFSTAT_TXFULL, - .tx_fifomask = S3C2440_UFSTAT_TXMASK, - .tx_fifoshift = S3C2440_UFSTAT_TXSHIFT, - .get_clksrc = s3c2440_serial_getsource, - .set_clksrc = s3c2440_serial_setsource, - .reset_port = s3c2440_serial_resetport, -}; - -/* device management */ - -static int s3c2440_serial_probe(struct platform_device *dev) -{ - dbg("s3c2440_serial_probe: dev=%p\n", dev); - return s3c24xx_serial_probe(dev, &s3c2440_uart_inf); -} - -static struct platform_driver s3c2440_serial_driver = { - .probe = s3c2440_serial_probe, - .remove = __devexit_p(s3c24xx_serial_remove), - .driver = { - .name = "s3c2440-uart", - .owner = THIS_MODULE, - }, -}; - -static int __init s3c2440_serial_init(void) -{ - return s3c24xx_serial_init(&s3c2440_serial_driver, &s3c2440_uart_inf); -} - -static void __exit s3c2440_serial_exit(void) -{ - platform_driver_unregister(&s3c2440_serial_driver); -} - -module_init(s3c2440_serial_init); -module_exit(s3c2440_serial_exit); - -MODULE_DESCRIPTION("Samsung S3C2440,S3C2442 SoC Serial port driver"); -MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>"); -MODULE_LICENSE("GPL v2"); -MODULE_ALIAS("platform:s3c2440-uart"); diff --git a/drivers/tty/serial/s3c6400.c b/drivers/tty/serial/s3c6400.c deleted file mode 100644 index e2f6913d84d5..000000000000 --- a/drivers/tty/serial/s3c6400.c +++ /dev/null @@ -1,149 +0,0 @@ -/* - * Driver for Samsung S3C6400 and S3C6410 SoC onboard UARTs. - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/module.h> -#include <linux/ioport.h> -#include <linux/io.h> -#include <linux/platform_device.h> -#include <linux/init.h> -#include <linux/serial_core.h> -#include <linux/serial.h> - -#include <asm/irq.h> -#include <mach/hardware.h> - -#include <plat/regs-serial.h> - -#include "samsung.h" - -static int s3c6400_serial_setsource(struct uart_port *port, - struct s3c24xx_uart_clksrc *clk) -{ - unsigned long ucon = rd_regl(port, S3C2410_UCON); - - if (strcmp(clk->name, "uclk0") == 0) { - ucon &= ~S3C6400_UCON_CLKMASK; - ucon |= S3C6400_UCON_UCLK0; - } else if (strcmp(clk->name, "uclk1") == 0) - ucon |= S3C6400_UCON_UCLK1; - else if (strcmp(clk->name, "pclk") == 0) { - /* See notes about transitioning from UCLK to PCLK */ - ucon &= ~S3C6400_UCON_UCLK0; - } else { - printk(KERN_ERR "unknown clock source %s\n", clk->name); - return -EINVAL; - } - - wr_regl(port, S3C2410_UCON, ucon); - return 0; -} - - -static int s3c6400_serial_getsource(struct uart_port *port, - struct s3c24xx_uart_clksrc *clk) -{ - u32 ucon = rd_regl(port, S3C2410_UCON); - - clk->divisor = 1; - - switch (ucon & S3C6400_UCON_CLKMASK) { - case S3C6400_UCON_UCLK0: - clk->name = "uclk0"; - break; - - case S3C6400_UCON_UCLK1: - clk->name = "uclk1"; - break; - - case S3C6400_UCON_PCLK: - case S3C6400_UCON_PCLK2: - clk->name = "pclk"; - break; - } - - return 0; -} - -static int s3c6400_serial_resetport(struct uart_port *port, - struct s3c2410_uartcfg *cfg) -{ - unsigned long ucon = rd_regl(port, S3C2410_UCON); - - dbg("s3c6400_serial_resetport: port=%p (%08lx), cfg=%p\n", - port, port->mapbase, cfg); - - /* ensure we don't change the clock settings... */ - - ucon &= S3C6400_UCON_CLKMASK; - - wr_regl(port, S3C2410_UCON, ucon | cfg->ucon); - wr_regl(port, S3C2410_ULCON, cfg->ulcon); - - /* reset both fifos */ - - wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH); - wr_regl(port, S3C2410_UFCON, cfg->ufcon); - - return 0; -} - -static struct s3c24xx_uart_info s3c6400_uart_inf = { - .name = "Samsung S3C6400 UART", - .type = PORT_S3C6400, - .fifosize = 64, - .has_divslot = 1, - .rx_fifomask = S3C2440_UFSTAT_RXMASK, - .rx_fifoshift = S3C2440_UFSTAT_RXSHIFT, - .rx_fifofull = S3C2440_UFSTAT_RXFULL, - .tx_fifofull = S3C2440_UFSTAT_TXFULL, - .tx_fifomask = S3C2440_UFSTAT_TXMASK, - .tx_fifoshift = S3C2440_UFSTAT_TXSHIFT, - .get_clksrc = s3c6400_serial_getsource, - .set_clksrc = s3c6400_serial_setsource, - .reset_port = s3c6400_serial_resetport, -}; - -/* device management */ - -static int s3c6400_serial_probe(struct platform_device *dev) -{ - dbg("s3c6400_serial_probe: dev=%p\n", dev); - return s3c24xx_serial_probe(dev, &s3c6400_uart_inf); -} - -static struct platform_driver s3c6400_serial_driver = { - .probe = s3c6400_serial_probe, - .remove = __devexit_p(s3c24xx_serial_remove), - .driver = { - .name = "s3c6400-uart", - .owner = THIS_MODULE, - }, -}; - -static int __init s3c6400_serial_init(void) -{ - return s3c24xx_serial_init(&s3c6400_serial_driver, &s3c6400_uart_inf); -} - -static void __exit s3c6400_serial_exit(void) -{ - platform_driver_unregister(&s3c6400_serial_driver); -} - -module_init(s3c6400_serial_init); -module_exit(s3c6400_serial_exit); - -MODULE_DESCRIPTION("Samsung S3C6400,S3C6410 SoC Serial port driver"); -MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>"); -MODULE_LICENSE("GPL v2"); -MODULE_ALIAS("platform:s3c6400-uart"); diff --git a/drivers/tty/serial/s5pv210.c b/drivers/tty/serial/s5pv210.c deleted file mode 100644 index 8b0b888a1b76..000000000000 --- a/drivers/tty/serial/s5pv210.c +++ /dev/null @@ -1,158 +0,0 @@ -/* - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * Based on drivers/serial/s3c6400.c - * - * Driver for Samsung S5PV210 SoC UARTs. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/module.h> -#include <linux/ioport.h> -#include <linux/io.h> -#include <linux/platform_device.h> -#include <linux/init.h> -#include <linux/serial_core.h> -#include <linux/serial.h> -#include <linux/delay.h> - -#include <asm/irq.h> -#include <mach/hardware.h> -#include <plat/regs-serial.h> -#include "samsung.h" - -static int s5pv210_serial_setsource(struct uart_port *port, - struct s3c24xx_uart_clksrc *clk) -{ - struct s3c2410_uartcfg *cfg = port->dev->platform_data; - unsigned long ucon = rd_regl(port, S3C2410_UCON); - - if (cfg->flags & NO_NEED_CHECK_CLKSRC) - return 0; - - if (strcmp(clk->name, "pclk") == 0) - ucon &= ~S5PV210_UCON_CLKMASK; - else if (strcmp(clk->name, "uclk1") == 0) - ucon |= S5PV210_UCON_CLKMASK; - else { - printk(KERN_ERR "unknown clock source %s\n", clk->name); - return -EINVAL; - } - - wr_regl(port, S3C2410_UCON, ucon); - return 0; -} - - -static int s5pv210_serial_getsource(struct uart_port *port, - struct s3c24xx_uart_clksrc *clk) -{ - struct s3c2410_uartcfg *cfg = port->dev->platform_data; - u32 ucon = rd_regl(port, S3C2410_UCON); - - clk->divisor = 1; - - if (cfg->flags & NO_NEED_CHECK_CLKSRC) - return 0; - - switch (ucon & S5PV210_UCON_CLKMASK) { - case S5PV210_UCON_PCLK: - clk->name = "pclk"; - break; - case S5PV210_UCON_UCLK: - clk->name = "uclk1"; - break; - } - - return 0; -} - -static int s5pv210_serial_resetport(struct uart_port *port, - struct s3c2410_uartcfg *cfg) -{ - unsigned long ucon = rd_regl(port, S3C2410_UCON); - - ucon &= S5PV210_UCON_CLKMASK; - wr_regl(port, S3C2410_UCON, ucon | cfg->ucon); - wr_regl(port, S3C2410_ULCON, cfg->ulcon); - - /* reset both fifos */ - wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH); - wr_regl(port, S3C2410_UFCON, cfg->ufcon); - - /* It is need to delay When reset FIFO register */ - udelay(1); - - return 0; -} - -#define S5PV210_UART_DEFAULT_INFO(fifo_size) \ - .name = "Samsung S5PV210 UART0", \ - .type = PORT_S3C6400, \ - .fifosize = fifo_size, \ - .has_divslot = 1, \ - .rx_fifomask = S5PV210_UFSTAT_RXMASK, \ - .rx_fifoshift = S5PV210_UFSTAT_RXSHIFT, \ - .rx_fifofull = S5PV210_UFSTAT_RXFULL, \ - .tx_fifofull = S5PV210_UFSTAT_TXFULL, \ - .tx_fifomask = S5PV210_UFSTAT_TXMASK, \ - .tx_fifoshift = S5PV210_UFSTAT_TXSHIFT, \ - .get_clksrc = s5pv210_serial_getsource, \ - .set_clksrc = s5pv210_serial_setsource, \ - .reset_port = s5pv210_serial_resetport - -static struct s3c24xx_uart_info s5p_port_fifo256 = { - S5PV210_UART_DEFAULT_INFO(256), -}; - -static struct s3c24xx_uart_info s5p_port_fifo64 = { - S5PV210_UART_DEFAULT_INFO(64), -}; - -static struct s3c24xx_uart_info s5p_port_fifo16 = { - S5PV210_UART_DEFAULT_INFO(16), -}; - -static struct s3c24xx_uart_info *s5p_uart_inf[] = { - [0] = &s5p_port_fifo256, - [1] = &s5p_port_fifo64, - [2] = &s5p_port_fifo16, - [3] = &s5p_port_fifo16, -}; - -/* device management */ -static int s5p_serial_probe(struct platform_device *pdev) -{ - return s3c24xx_serial_probe(pdev, s5p_uart_inf[pdev->id]); -} - -static struct platform_driver s5p_serial_driver = { - .probe = s5p_serial_probe, - .remove = __devexit_p(s3c24xx_serial_remove), - .driver = { - .name = "s5pv210-uart", - .owner = THIS_MODULE, - }, -}; - -static int __init s5p_serial_init(void) -{ - return s3c24xx_serial_init(&s5p_serial_driver, *s5p_uart_inf); -} - -static void __exit s5p_serial_exit(void) -{ - platform_driver_unregister(&s5p_serial_driver); -} - -module_init(s5p_serial_init); -module_exit(s5p_serial_exit); - -MODULE_LICENSE("GPL"); -MODULE_ALIAS("platform:s5pv210-uart"); -MODULE_DESCRIPTION("Samsung S5PV210 UART Driver support"); -MODULE_AUTHOR("Thomas Abraham <thomas.ab@samsung.com>"); diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c index b31f1c3a2c4c..f96f37b5fec6 100644 --- a/drivers/tty/serial/samsung.c +++ b/drivers/tty/serial/samsung.c @@ -42,6 +42,7 @@ #include <linux/delay.h> #include <linux/clk.h> #include <linux/cpufreq.h> +#include <linux/of.h> #include <asm/irq.h> @@ -49,6 +50,7 @@ #include <mach/map.h> #include <plat/regs-serial.h> +#include <plat/clock.h> #include "samsung.h" @@ -190,10 +192,13 @@ static inline struct s3c24xx_uart_info *s3c24xx_port_to_info(struct uart_port *p static inline struct s3c2410_uartcfg *s3c24xx_port_to_cfg(struct uart_port *port) { + struct s3c24xx_uart_port *ourport; + if (port->dev == NULL) return NULL; - return (struct s3c2410_uartcfg *)port->dev->platform_data; + ourport = container_of(port, struct s3c24xx_uart_port, port); + return ourport->cfg; } static int s3c24xx_serial_rx_fifocnt(struct s3c24xx_uart_port *ourport, @@ -202,7 +207,7 @@ static int s3c24xx_serial_rx_fifocnt(struct s3c24xx_uart_port *ourport, struct s3c24xx_uart_info *info = ourport->info; if (ufstat & info->rx_fifofull) - return info->fifosize; + return ourport->port.fifosize; return (ufstat & info->rx_fifomask) >> info->rx_fifoshift; } @@ -555,154 +560,98 @@ static void s3c24xx_serial_pm(struct uart_port *port, unsigned int level, * */ +#define MAX_CLK_NAME_LENGTH 15 -#define MAX_CLKS (8) - -static struct s3c24xx_uart_clksrc tmp_clksrc = { - .name = "pclk", - .min_baud = 0, - .max_baud = 0, - .divisor = 1, -}; - -static inline int -s3c24xx_serial_getsource(struct uart_port *port, struct s3c24xx_uart_clksrc *c) +static inline int s3c24xx_serial_getsource(struct uart_port *port) { struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port); + unsigned int ucon; - return (info->get_clksrc)(port, c); -} - -static inline int -s3c24xx_serial_setsource(struct uart_port *port, struct s3c24xx_uart_clksrc *c) -{ - struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port); + if (info->num_clks == 1) + return 0; - return (info->set_clksrc)(port, c); + ucon = rd_regl(port, S3C2410_UCON); + ucon &= info->clksel_mask; + return ucon >> info->clksel_shift; } -struct baud_calc { - struct s3c24xx_uart_clksrc *clksrc; - unsigned int calc; - unsigned int divslot; - unsigned int quot; - struct clk *src; -}; - -static int s3c24xx_serial_calcbaud(struct baud_calc *calc, - struct uart_port *port, - struct s3c24xx_uart_clksrc *clksrc, - unsigned int baud) +static void s3c24xx_serial_setsource(struct uart_port *port, + unsigned int clk_sel) { - struct s3c24xx_uart_port *ourport = to_ourport(port); - unsigned long rate; - - calc->src = clk_get(port->dev, clksrc->name); - if (calc->src == NULL || IS_ERR(calc->src)) - return 0; - - rate = clk_get_rate(calc->src); - rate /= clksrc->divisor; + struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port); + unsigned int ucon; - calc->clksrc = clksrc; + if (info->num_clks == 1) + return; - if (ourport->info->has_divslot) { - unsigned long div = rate / baud; - - /* The UDIVSLOT register on the newer UARTs allows us to - * get a divisor adjustment of 1/16th on the baud clock. - * - * We don't keep the UDIVSLOT value (the 16ths we calculated - * by not multiplying the baud by 16) as it is easy enough - * to recalculate. - */ - - calc->quot = div / 16; - calc->calc = rate / div; - } else { - calc->quot = (rate + (8 * baud)) / (16 * baud); - calc->calc = (rate / (calc->quot * 16)); - } + ucon = rd_regl(port, S3C2410_UCON); + if ((ucon & info->clksel_mask) >> info->clksel_shift == clk_sel) + return; - calc->quot--; - return 1; + ucon &= ~info->clksel_mask; + ucon |= clk_sel << info->clksel_shift; + wr_regl(port, S3C2410_UCON, ucon); } -static unsigned int s3c24xx_serial_getclk(struct uart_port *port, - struct s3c24xx_uart_clksrc **clksrc, - struct clk **clk, - unsigned int baud) +static unsigned int s3c24xx_serial_getclk(struct s3c24xx_uart_port *ourport, + unsigned int req_baud, struct clk **best_clk, + unsigned int *clk_num) { - struct s3c2410_uartcfg *cfg = s3c24xx_port_to_cfg(port); - struct s3c24xx_uart_clksrc *clkp; - struct baud_calc res[MAX_CLKS]; - struct baud_calc *resptr, *best, *sptr; - int i; - - clkp = cfg->clocks; - best = NULL; - - if (cfg->clocks_size < 2) { - if (cfg->clocks_size == 0) - clkp = &tmp_clksrc; - - /* check to see if we're sourcing fclk, and if so we're - * going to have to update the clock source - */ - - if (strcmp(clkp->name, "fclk") == 0) { - struct s3c24xx_uart_clksrc src; - - s3c24xx_serial_getsource(port, &src); - - /* check that the port already using fclk, and if - * not, then re-select fclk + struct s3c24xx_uart_info *info = ourport->info; + struct clk *clk; + unsigned long rate; + unsigned int cnt, baud, quot, clk_sel, best_quot = 0; + char clkname[MAX_CLK_NAME_LENGTH]; + int calc_deviation, deviation = (1 << 30) - 1; + + *best_clk = NULL; + clk_sel = (ourport->cfg->clk_sel) ? ourport->cfg->clk_sel : + ourport->info->def_clk_sel; + for (cnt = 0; cnt < info->num_clks; cnt++) { + if (!(clk_sel & (1 << cnt))) + continue; + + sprintf(clkname, "clk_uart_baud%d", cnt); + clk = clk_get(ourport->port.dev, clkname); + if (IS_ERR_OR_NULL(clk)) + continue; + + rate = clk_get_rate(clk); + if (!rate) + continue; + + if (ourport->info->has_divslot) { + unsigned long div = rate / req_baud; + + /* The UDIVSLOT register on the newer UARTs allows us to + * get a divisor adjustment of 1/16th on the baud clock. + * + * We don't keep the UDIVSLOT value (the 16ths we + * calculated by not multiplying the baud by 16) as it + * is easy enough to recalculate. */ - if (strcmp(src.name, clkp->name) == 0) { - s3c24xx_serial_setsource(port, clkp); - s3c24xx_serial_getsource(port, &src); - } - - clkp->divisor = src.divisor; - } - - s3c24xx_serial_calcbaud(res, port, clkp, baud); - best = res; - resptr = best + 1; - } else { - resptr = res; - - for (i = 0; i < cfg->clocks_size; i++, clkp++) { - if (s3c24xx_serial_calcbaud(resptr, port, clkp, baud)) - resptr++; + quot = div / 16; + baud = rate / div; + } else { + quot = (rate + (8 * req_baud)) / (16 * req_baud); + baud = rate / (quot * 16); } - } - - /* ok, we now need to select the best clock we found */ - - if (!best) { - unsigned int deviation = (1<<30)|((1<<30)-1); - int calc_deviation; + quot--; - for (sptr = res; sptr < resptr; sptr++) { - calc_deviation = baud - sptr->calc; - if (calc_deviation < 0) - calc_deviation = -calc_deviation; + calc_deviation = req_baud - baud; + if (calc_deviation < 0) + calc_deviation = -calc_deviation; - if (calc_deviation < deviation) { - best = sptr; - deviation = calc_deviation; - } + if (calc_deviation < deviation) { + *best_clk = clk; + best_quot = quot; + *clk_num = cnt; + deviation = calc_deviation; } } - /* store results to pass back */ - - *clksrc = best->clksrc; - *clk = best->src; - - return best->quot; + return best_quot; } /* udivslot_table[] @@ -735,10 +684,9 @@ static void s3c24xx_serial_set_termios(struct uart_port *port, { struct s3c2410_uartcfg *cfg = s3c24xx_port_to_cfg(port); struct s3c24xx_uart_port *ourport = to_ourport(port); - struct s3c24xx_uart_clksrc *clksrc = NULL; struct clk *clk = NULL; unsigned long flags; - unsigned int baud, quot; + unsigned int baud, quot, clk_sel = 0; unsigned int ulcon; unsigned int umcon; unsigned int udivslot = 0; @@ -754,17 +702,16 @@ static void s3c24xx_serial_set_termios(struct uart_port *port, */ baud = uart_get_baud_rate(port, termios, old, 0, 115200*8); - + quot = s3c24xx_serial_getclk(ourport, baud, &clk, &clk_sel); if (baud == 38400 && (port->flags & UPF_SPD_MASK) == UPF_SPD_CUST) quot = port->custom_divisor; - else - quot = s3c24xx_serial_getclk(port, &clksrc, &clk, baud); + if (!clk) + return; /* check to see if we need to change clock source */ - if (ourport->clksrc != clksrc || ourport->baudclk != clk) { - dbg("selecting clock %p\n", clk); - s3c24xx_serial_setsource(port, clksrc); + if (ourport->baudclk != clk) { + s3c24xx_serial_setsource(port, clk_sel); if (ourport->baudclk != NULL && !IS_ERR(ourport->baudclk)) { clk_disable(ourport->baudclk); @@ -773,7 +720,6 @@ static void s3c24xx_serial_set_termios(struct uart_port *port, clk_enable(clk); - ourport->clksrc = clksrc; ourport->baudclk = clk; ourport->baudclk_rate = clk ? clk_get_rate(clk) : 0; } @@ -1020,16 +966,29 @@ static struct s3c24xx_uart_port s3c24xx_serial_ports[CONFIG_SERIAL_SAMSUNG_UARTS /* s3c24xx_serial_resetport * - * wrapper to call the specific reset for this port (reset the fifos - * and the settings) + * reset the fifos and other the settings. */ -static inline int s3c24xx_serial_resetport(struct uart_port *port, - struct s3c2410_uartcfg *cfg) +static void s3c24xx_serial_resetport(struct uart_port *port, + struct s3c2410_uartcfg *cfg) { struct s3c24xx_uart_info *info = s3c24xx_port_to_info(port); + unsigned long ucon = rd_regl(port, S3C2410_UCON); + unsigned int ucon_mask; + + ucon_mask = info->clksel_mask; + if (info->type == PORT_S3C2440) + ucon_mask |= S3C2440_UCON0_DIVMASK; - return (info->reset_port)(port, cfg); + ucon &= ucon_mask; + wr_regl(port, S3C2410_UCON, ucon | cfg->ucon); + + /* reset both fifos */ + wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH); + wr_regl(port, S3C2410_UFCON, cfg->ufcon); + + /* some delay is required after fifo reset */ + udelay(1); } @@ -1121,11 +1080,10 @@ static inline void s3c24xx_serial_cpufreq_deregister(struct s3c24xx_uart_port *p */ static int s3c24xx_serial_init_port(struct s3c24xx_uart_port *ourport, - struct s3c24xx_uart_info *info, struct platform_device *platdev) { struct uart_port *port = &ourport->port; - struct s3c2410_uartcfg *cfg; + struct s3c2410_uartcfg *cfg = ourport->cfg; struct resource *res; int ret; @@ -1134,30 +1092,16 @@ static int s3c24xx_serial_init_port(struct s3c24xx_uart_port *ourport, if (platdev == NULL) return -ENODEV; - cfg = s3c24xx_dev_to_cfg(&platdev->dev); - if (port->mapbase != 0) return 0; - if (cfg->hwport > CONFIG_SERIAL_SAMSUNG_UARTS) { - printk(KERN_ERR "%s: port %d bigger than %d\n", __func__, - cfg->hwport, CONFIG_SERIAL_SAMSUNG_UARTS); - return -ERANGE; - } - /* setup info for port */ port->dev = &platdev->dev; - ourport->info = info; /* Startup sequence is different for s3c64xx and higher SoC's */ if (s3c24xx_serial_has_interrupt_mask(port)) s3c24xx_serial_ops.startup = s3c64xx_serial_startup; - /* copy the info in from provided structure */ - ourport->port.fifosize = info->fifosize; - - dbg("s3c24xx_serial_init_port: %p (hw %d)...\n", port, cfg->hwport); - port->uartclk = 1; if (cfg->uart_flags & UPF_CONS_FLOW) { @@ -1215,43 +1159,74 @@ static ssize_t s3c24xx_serial_show_clksrc(struct device *dev, struct uart_port *port = s3c24xx_dev_to_port(dev); struct s3c24xx_uart_port *ourport = to_ourport(port); - return snprintf(buf, PAGE_SIZE, "* %s\n", ourport->clksrc->name); + return snprintf(buf, PAGE_SIZE, "* %s\n", ourport->baudclk->name); } static DEVICE_ATTR(clock_source, S_IRUGO, s3c24xx_serial_show_clksrc, NULL); + /* Device driver serial port probe */ +static const struct of_device_id s3c24xx_uart_dt_match[]; static int probe_index; -int s3c24xx_serial_probe(struct platform_device *dev, - struct s3c24xx_uart_info *info) +static inline struct s3c24xx_serial_drv_data *s3c24xx_get_driver_data( + struct platform_device *pdev) +{ +#ifdef CONFIG_OF + if (pdev->dev.of_node) { + const struct of_device_id *match; + match = of_match_node(s3c24xx_uart_dt_match, pdev->dev.of_node); + return (struct s3c24xx_serial_drv_data *)match->data; + } +#endif + return (struct s3c24xx_serial_drv_data *) + platform_get_device_id(pdev)->driver_data; +} + +static int s3c24xx_serial_probe(struct platform_device *pdev) { struct s3c24xx_uart_port *ourport; int ret; - dbg("s3c24xx_serial_probe(%p, %p) %d\n", dev, info, probe_index); + dbg("s3c24xx_serial_probe(%p) %d\n", pdev, probe_index); ourport = &s3c24xx_serial_ports[probe_index]; + + ourport->drv_data = s3c24xx_get_driver_data(pdev); + if (!ourport->drv_data) { + dev_err(&pdev->dev, "could not find driver data\n"); + return -ENODEV; + } + + ourport->info = ourport->drv_data->info; + ourport->cfg = (pdev->dev.platform_data) ? + (struct s3c2410_uartcfg *)pdev->dev.platform_data : + ourport->drv_data->def_cfg; + + ourport->port.fifosize = (ourport->info->fifosize) ? + ourport->info->fifosize : + ourport->drv_data->fifosize[probe_index]; + probe_index++; dbg("%s: initialising port %p...\n", __func__, ourport); - ret = s3c24xx_serial_init_port(ourport, info, dev); + ret = s3c24xx_serial_init_port(ourport, pdev); if (ret < 0) goto probe_err; dbg("%s: adding port\n", __func__); uart_add_one_port(&s3c24xx_uart_drv, &ourport->port); - platform_set_drvdata(dev, &ourport->port); + platform_set_drvdata(pdev, &ourport->port); - ret = device_create_file(&dev->dev, &dev_attr_clock_source); + ret = device_create_file(&pdev->dev, &dev_attr_clock_source); if (ret < 0) - printk(KERN_ERR "%s: failed to add clksrc attr.\n", __func__); + dev_err(&pdev->dev, "failed to add clock source attr.\n"); ret = s3c24xx_serial_cpufreq_register(ourport); if (ret < 0) - dev_err(&dev->dev, "failed to add cpufreq notifier\n"); + dev_err(&pdev->dev, "failed to add cpufreq notifier\n"); return 0; @@ -1259,9 +1234,7 @@ int s3c24xx_serial_probe(struct platform_device *dev, return ret; } -EXPORT_SYMBOL_GPL(s3c24xx_serial_probe); - -int __devexit s3c24xx_serial_remove(struct platform_device *dev) +static int __devexit s3c24xx_serial_remove(struct platform_device *dev) { struct uart_port *port = s3c24xx_dev_to_port(&dev->dev); @@ -1274,8 +1247,6 @@ int __devexit s3c24xx_serial_remove(struct platform_device *dev) return 0; } -EXPORT_SYMBOL_GPL(s3c24xx_serial_remove); - /* UART power management code */ #ifdef CONFIG_PM_SLEEP static int s3c24xx_serial_suspend(struct device *dev) @@ -1315,41 +1286,6 @@ static const struct dev_pm_ops s3c24xx_serial_pm_ops = { #define SERIAL_SAMSUNG_PM_OPS NULL #endif /* CONFIG_PM_SLEEP */ -int s3c24xx_serial_init(struct platform_driver *drv, - struct s3c24xx_uart_info *info) -{ - dbg("s3c24xx_serial_init(%p,%p)\n", drv, info); - - drv->driver.pm = SERIAL_SAMSUNG_PM_OPS; - - return platform_driver_register(drv); -} - -EXPORT_SYMBOL_GPL(s3c24xx_serial_init); - -/* module initialisation code */ - -static int __init s3c24xx_serial_modinit(void) -{ - int ret; - - ret = uart_register_driver(&s3c24xx_uart_drv); - if (ret < 0) { - printk(KERN_ERR "failed to register UART driver\n"); - return -1; - } - - return 0; -} - -static void __exit s3c24xx_serial_modexit(void) -{ - uart_unregister_driver(&s3c24xx_uart_drv); -} - -module_init(s3c24xx_serial_modinit); -module_exit(s3c24xx_serial_modexit); - /* Console code */ #ifdef CONFIG_SERIAL_SAMSUNG_CONSOLE @@ -1395,12 +1331,13 @@ static void __init s3c24xx_serial_get_options(struct uart_port *port, int *baud, int *parity, int *bits) { - struct s3c24xx_uart_clksrc clksrc; struct clk *clk; unsigned int ulcon; unsigned int ucon; unsigned int ubrdiv; unsigned long rate; + unsigned int clk_sel; + char clk_name[MAX_CLK_NAME_LENGTH]; ulcon = rd_regl(port, S3C2410_ULCON); ucon = rd_regl(port, S3C2410_UCON); @@ -1445,44 +1382,21 @@ s3c24xx_serial_get_options(struct uart_port *port, int *baud, /* now calculate the baud rate */ - s3c24xx_serial_getsource(port, &clksrc); + clk_sel = s3c24xx_serial_getsource(port); + sprintf(clk_name, "clk_uart_baud%d", clk_sel); - clk = clk_get(port->dev, clksrc.name); + clk = clk_get(port->dev, clk_name); if (!IS_ERR(clk) && clk != NULL) - rate = clk_get_rate(clk) / clksrc.divisor; + rate = clk_get_rate(clk); else rate = 1; - *baud = rate / (16 * (ubrdiv + 1)); dbg("calculated baud %d\n", *baud); } } -/* s3c24xx_serial_init_ports - * - * initialise the serial ports from the machine provided initialisation - * data. -*/ - -static int s3c24xx_serial_init_ports(struct s3c24xx_uart_info **info) -{ - struct s3c24xx_uart_port *ptr = s3c24xx_serial_ports; - struct platform_device **platdev_ptr; - int i; - - dbg("s3c24xx_serial_init_ports: initialising ports...\n"); - - platdev_ptr = s3c24xx_uart_devs; - - for (i = 0; i < CONFIG_SERIAL_SAMSUNG_UARTS; i++, ptr++, platdev_ptr++) { - s3c24xx_serial_init_port(ptr, info[i], *platdev_ptr); - } - - return 0; -} - static int __init s3c24xx_serial_console_setup(struct console *co, char *options) { @@ -1526,11 +1440,6 @@ s3c24xx_serial_console_setup(struct console *co, char *options) return uart_set_options(port, co, baud, parity, bits, flow); } -/* s3c24xx_serial_initconsole - * - * initialise the console from one of the uart drivers -*/ - static struct console s3c24xx_serial_console = { .name = S3C24XX_SERIAL_NAME, .device = uart_console_device, @@ -1540,34 +1449,250 @@ static struct console s3c24xx_serial_console = { .setup = s3c24xx_serial_console_setup, .data = &s3c24xx_uart_drv, }; +#endif /* CONFIG_SERIAL_SAMSUNG_CONSOLE */ -int s3c24xx_serial_initconsole(struct platform_driver *drv, - struct s3c24xx_uart_info **info) +#ifdef CONFIG_CPU_S3C2410 +static struct s3c24xx_serial_drv_data s3c2410_serial_drv_data = { + .info = &(struct s3c24xx_uart_info) { + .name = "Samsung S3C2410 UART", + .type = PORT_S3C2410, + .fifosize = 16, + .rx_fifomask = S3C2410_UFSTAT_RXMASK, + .rx_fifoshift = S3C2410_UFSTAT_RXSHIFT, + .rx_fifofull = S3C2410_UFSTAT_RXFULL, + .tx_fifofull = S3C2410_UFSTAT_TXFULL, + .tx_fifomask = S3C2410_UFSTAT_TXMASK, + .tx_fifoshift = S3C2410_UFSTAT_TXSHIFT, + .def_clk_sel = S3C2410_UCON_CLKSEL0, + .num_clks = 2, + .clksel_mask = S3C2410_UCON_CLKMASK, + .clksel_shift = S3C2410_UCON_CLKSHIFT, + }, + .def_cfg = &(struct s3c2410_uartcfg) { + .ucon = S3C2410_UCON_DEFAULT, + .ufcon = S3C2410_UFCON_DEFAULT, + }, +}; +#define S3C2410_SERIAL_DRV_DATA ((kernel_ulong_t)&s3c2410_serial_drv_data) +#else +#define S3C2410_SERIAL_DRV_DATA (kernel_ulong_t)NULL +#endif -{ - struct platform_device *dev = s3c24xx_uart_devs[0]; +#ifdef CONFIG_CPU_S3C2412 +static struct s3c24xx_serial_drv_data s3c2412_serial_drv_data = { + .info = &(struct s3c24xx_uart_info) { + .name = "Samsung S3C2412 UART", + .type = PORT_S3C2412, + .fifosize = 64, + .has_divslot = 1, + .rx_fifomask = S3C2440_UFSTAT_RXMASK, + .rx_fifoshift = S3C2440_UFSTAT_RXSHIFT, + .rx_fifofull = S3C2440_UFSTAT_RXFULL, + .tx_fifofull = S3C2440_UFSTAT_TXFULL, + .tx_fifomask = S3C2440_UFSTAT_TXMASK, + .tx_fifoshift = S3C2440_UFSTAT_TXSHIFT, + .def_clk_sel = S3C2410_UCON_CLKSEL2, + .num_clks = 4, + .clksel_mask = S3C2412_UCON_CLKMASK, + .clksel_shift = S3C2412_UCON_CLKSHIFT, + }, + .def_cfg = &(struct s3c2410_uartcfg) { + .ucon = S3C2410_UCON_DEFAULT, + .ufcon = S3C2410_UFCON_DEFAULT, + }, +}; +#define S3C2412_SERIAL_DRV_DATA ((kernel_ulong_t)&s3c2412_serial_drv_data) +#else +#define S3C2412_SERIAL_DRV_DATA (kernel_ulong_t)NULL +#endif - dbg("s3c24xx_serial_initconsole\n"); +#if defined(CONFIG_CPU_S3C2440) || defined(CONFIG_CPU_S3C2416) || \ + defined(CONFIG_CPU_S3C2443) +static struct s3c24xx_serial_drv_data s3c2440_serial_drv_data = { + .info = &(struct s3c24xx_uart_info) { + .name = "Samsung S3C2440 UART", + .type = PORT_S3C2440, + .fifosize = 64, + .has_divslot = 1, + .rx_fifomask = S3C2440_UFSTAT_RXMASK, + .rx_fifoshift = S3C2440_UFSTAT_RXSHIFT, + .rx_fifofull = S3C2440_UFSTAT_RXFULL, + .tx_fifofull = S3C2440_UFSTAT_TXFULL, + .tx_fifomask = S3C2440_UFSTAT_TXMASK, + .tx_fifoshift = S3C2440_UFSTAT_TXSHIFT, + .def_clk_sel = S3C2410_UCON_CLKSEL2, + .num_clks = 4, + .clksel_mask = S3C2412_UCON_CLKMASK, + .clksel_shift = S3C2412_UCON_CLKSHIFT, + }, + .def_cfg = &(struct s3c2410_uartcfg) { + .ucon = S3C2410_UCON_DEFAULT, + .ufcon = S3C2410_UFCON_DEFAULT, + }, +}; +#define S3C2440_SERIAL_DRV_DATA ((kernel_ulong_t)&s3c2440_serial_drv_data) +#else +#define S3C2440_SERIAL_DRV_DATA (kernel_ulong_t)NULL +#endif - /* select driver based on the cpu */ +#if defined(CONFIG_CPU_S3C6400) || defined(CONFIG_CPU_S3C6410) || \ + defined(CONFIG_CPU_S5P6440) || defined(CONFIG_CPU_S5P6450) || \ + defined(CONFIG_CPU_S5PC100) +static struct s3c24xx_serial_drv_data s3c6400_serial_drv_data = { + .info = &(struct s3c24xx_uart_info) { + .name = "Samsung S3C6400 UART", + .type = PORT_S3C6400, + .fifosize = 64, + .has_divslot = 1, + .rx_fifomask = S3C2440_UFSTAT_RXMASK, + .rx_fifoshift = S3C2440_UFSTAT_RXSHIFT, + .rx_fifofull = S3C2440_UFSTAT_RXFULL, + .tx_fifofull = S3C2440_UFSTAT_TXFULL, + .tx_fifomask = S3C2440_UFSTAT_TXMASK, + .tx_fifoshift = S3C2440_UFSTAT_TXSHIFT, + .def_clk_sel = S3C2410_UCON_CLKSEL2, + .num_clks = 4, + .clksel_mask = S3C6400_UCON_CLKMASK, + .clksel_shift = S3C6400_UCON_CLKSHIFT, + }, + .def_cfg = &(struct s3c2410_uartcfg) { + .ucon = S3C2410_UCON_DEFAULT, + .ufcon = S3C2410_UFCON_DEFAULT, + }, +}; +#define S3C6400_SERIAL_DRV_DATA ((kernel_ulong_t)&s3c6400_serial_drv_data) +#else +#define S3C6400_SERIAL_DRV_DATA (kernel_ulong_t)NULL +#endif - if (dev == NULL) { - printk(KERN_ERR "s3c24xx: no devices for console init\n"); - return 0; - } +#ifdef CONFIG_CPU_S5PV210 +static struct s3c24xx_serial_drv_data s5pv210_serial_drv_data = { + .info = &(struct s3c24xx_uart_info) { + .name = "Samsung S5PV210 UART", + .type = PORT_S3C6400, + .has_divslot = 1, + .rx_fifomask = S5PV210_UFSTAT_RXMASK, + .rx_fifoshift = S5PV210_UFSTAT_RXSHIFT, + .rx_fifofull = S5PV210_UFSTAT_RXFULL, + .tx_fifofull = S5PV210_UFSTAT_TXFULL, + .tx_fifomask = S5PV210_UFSTAT_TXMASK, + .tx_fifoshift = S5PV210_UFSTAT_TXSHIFT, + .def_clk_sel = S3C2410_UCON_CLKSEL0, + .num_clks = 2, + .clksel_mask = S5PV210_UCON_CLKMASK, + .clksel_shift = S5PV210_UCON_CLKSHIFT, + }, + .def_cfg = &(struct s3c2410_uartcfg) { + .ucon = S5PV210_UCON_DEFAULT, + .ufcon = S5PV210_UFCON_DEFAULT, + }, + .fifosize = { 256, 64, 16, 16 }, +}; +#define S5PV210_SERIAL_DRV_DATA ((kernel_ulong_t)&s5pv210_serial_drv_data) +#else +#define S5PV210_SERIAL_DRV_DATA (kernel_ulong_t)NULL +#endif - if (strcmp(dev->name, drv->driver.name) != 0) - return 0; +#ifdef CONFIG_CPU_EXYNOS4210 +static struct s3c24xx_serial_drv_data exynos4210_serial_drv_data = { + .info = &(struct s3c24xx_uart_info) { + .name = "Samsung Exynos4 UART", + .type = PORT_S3C6400, + .has_divslot = 1, + .rx_fifomask = S5PV210_UFSTAT_RXMASK, + .rx_fifoshift = S5PV210_UFSTAT_RXSHIFT, + .rx_fifofull = S5PV210_UFSTAT_RXFULL, + .tx_fifofull = S5PV210_UFSTAT_TXFULL, + .tx_fifomask = S5PV210_UFSTAT_TXMASK, + .tx_fifoshift = S5PV210_UFSTAT_TXSHIFT, + .def_clk_sel = S3C2410_UCON_CLKSEL0, + .num_clks = 1, + .clksel_mask = 0, + .clksel_shift = 0, + }, + .def_cfg = &(struct s3c2410_uartcfg) { + .ucon = S5PV210_UCON_DEFAULT, + .ufcon = S5PV210_UFCON_DEFAULT, + .has_fracval = 1, + }, + .fifosize = { 256, 64, 16, 16 }, +}; +#define EXYNOS4210_SERIAL_DRV_DATA ((kernel_ulong_t)&exynos4210_serial_drv_data) +#else +#define EXYNOS4210_SERIAL_DRV_DATA (kernel_ulong_t)NULL +#endif - s3c24xx_serial_console.data = &s3c24xx_uart_drv; - s3c24xx_serial_init_ports(info); +static struct platform_device_id s3c24xx_serial_driver_ids[] = { + { + .name = "s3c2410-uart", + .driver_data = S3C2410_SERIAL_DRV_DATA, + }, { + .name = "s3c2412-uart", + .driver_data = S3C2412_SERIAL_DRV_DATA, + }, { + .name = "s3c2440-uart", + .driver_data = S3C2440_SERIAL_DRV_DATA, + }, { + .name = "s3c6400-uart", + .driver_data = S3C6400_SERIAL_DRV_DATA, + }, { + .name = "s5pv210-uart", + .driver_data = S5PV210_SERIAL_DRV_DATA, + }, { + .name = "exynos4210-uart", + .driver_data = EXYNOS4210_SERIAL_DRV_DATA, + }, + { }, +}; +MODULE_DEVICE_TABLE(platform, s3c24xx_serial_driver_ids); - register_console(&s3c24xx_serial_console); - return 0; +#ifdef CONFIG_OF +static const struct of_device_id s3c24xx_uart_dt_match[] = { + { .compatible = "samsung,exynos4210-uart", + .data = (void *)EXYNOS4210_SERIAL_DRV_DATA }, + {}, +}; +MODULE_DEVICE_TABLE(of, s3c24xx_uart_dt_match); +#else +#define s3c24xx_uart_dt_match NULL +#endif + +static struct platform_driver samsung_serial_driver = { + .probe = s3c24xx_serial_probe, + .remove = __devexit_p(s3c24xx_serial_remove), + .id_table = s3c24xx_serial_driver_ids, + .driver = { + .name = "samsung-uart", + .owner = THIS_MODULE, + .pm = SERIAL_SAMSUNG_PM_OPS, + .of_match_table = s3c24xx_uart_dt_match, + }, +}; + +/* module initialisation code */ + +static int __init s3c24xx_serial_modinit(void) +{ + int ret; + + ret = uart_register_driver(&s3c24xx_uart_drv); + if (ret < 0) { + printk(KERN_ERR "failed to register UART driver\n"); + return -1; + } + + return platform_driver_register(&samsung_serial_driver); } -#endif /* CONFIG_SERIAL_SAMSUNG_CONSOLE */ +static void __exit s3c24xx_serial_modexit(void) +{ + uart_unregister_driver(&s3c24xx_uart_drv); +} + +module_init(s3c24xx_serial_modinit); +module_exit(s3c24xx_serial_modexit); +MODULE_ALIAS("platform:samsung-uart"); MODULE_DESCRIPTION("Samsung SoC Serial port driver"); MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>"); MODULE_LICENSE("GPL v2"); diff --git a/drivers/tty/serial/samsung.h b/drivers/tty/serial/samsung.h index 8e87b788e5c6..1a4bca3e4179 100644 --- a/drivers/tty/serial/samsung.h +++ b/drivers/tty/serial/samsung.h @@ -19,20 +19,25 @@ struct s3c24xx_uart_info { unsigned long tx_fifomask; unsigned long tx_fifoshift; unsigned long tx_fifofull; + unsigned int def_clk_sel; + unsigned long num_clks; + unsigned long clksel_mask; + unsigned long clksel_shift; /* uart port features */ unsigned int has_divslot:1; - /* clock source control */ - - int (*get_clksrc)(struct uart_port *, struct s3c24xx_uart_clksrc *clk); - int (*set_clksrc)(struct uart_port *, struct s3c24xx_uart_clksrc *clk); - /* uart controls */ int (*reset_port)(struct uart_port *, struct s3c2410_uartcfg *); }; +struct s3c24xx_serial_drv_data { + struct s3c24xx_uart_info *info; + struct s3c2410_uartcfg *def_cfg; + unsigned int fifosize[CONFIG_SERIAL_SAMSUNG_UARTS]; +}; + struct s3c24xx_uart_port { unsigned char rx_claimed; unsigned char tx_claimed; @@ -43,10 +48,13 @@ struct s3c24xx_uart_port { unsigned int tx_irq; struct s3c24xx_uart_info *info; - struct s3c24xx_uart_clksrc *clksrc; struct clk *clk; struct clk *baudclk; struct uart_port port; + struct s3c24xx_serial_drv_data *drv_data; + + /* reference to platform data */ + struct s3c2410_uartcfg *cfg; #ifdef CONFIG_CPU_FREQ struct notifier_block freq_transition; @@ -56,7 +64,6 @@ struct s3c24xx_uart_port { /* conversion functions */ #define s3c24xx_dev_to_port(__dev) (struct uart_port *)dev_get_drvdata(__dev) -#define s3c24xx_dev_to_cfg(__dev) (struct s3c2410_uartcfg *)((__dev)->platform_data) /* register access controls */ @@ -69,17 +76,6 @@ struct s3c24xx_uart_port { #define wr_regb(port, reg, val) __raw_writeb(val, portaddr(port, reg)) #define wr_regl(port, reg, val) __raw_writel(val, portaddr(port, reg)) -extern int s3c24xx_serial_probe(struct platform_device *dev, - struct s3c24xx_uart_info *uart); - -extern int __devexit s3c24xx_serial_remove(struct platform_device *dev); - -extern int s3c24xx_serial_initconsole(struct platform_driver *drv, - struct s3c24xx_uart_info **uart); - -extern int s3c24xx_serial_init(struct platform_driver *drv, - struct s3c24xx_uart_info *info); - #ifdef CONFIG_SERIAL_SAMSUNG_DEBUG extern void printascii(const char *); diff --git a/drivers/tty/serial/sc26xx.c b/drivers/tty/serial/sc26xx.c index 75038ad2b242..e0b4b0a30a5a 100644 --- a/drivers/tty/serial/sc26xx.c +++ b/drivers/tty/serial/sc26xx.c @@ -736,19 +736,7 @@ static struct platform_driver sc26xx_driver = { }, }; -static int __init sc26xx_init(void) -{ - return platform_driver_register(&sc26xx_driver); -} - -static void __exit sc26xx_exit(void) -{ - platform_driver_unregister(&sc26xx_driver); -} - -module_init(sc26xx_init); -module_exit(sc26xx_exit); - +module_platform_driver(sc26xx_driver); MODULE_AUTHOR("Thomas Bogendörfer"); MODULE_DESCRIPTION("SC681/SC2692 serial driver"); diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c index 0406d7ff505e..c7bf31a6a7e7 100644 --- a/drivers/tty/serial/serial_core.c +++ b/drivers/tty/serial/serial_core.c @@ -22,6 +22,7 @@ */ #include <linux/module.h> #include <linux/tty.h> +#include <linux/tty_flip.h> #include <linux/slab.h> #include <linux/init.h> #include <linux/console.h> @@ -60,6 +61,8 @@ static void uart_change_speed(struct tty_struct *tty, struct uart_state *state, static void uart_wait_until_sent(struct tty_struct *tty, int timeout); static void uart_change_pm(struct uart_state *state, int pm_state); +static void uart_port_shutdown(struct tty_port *port); + /* * This routine is used by the interrupt handler to schedule processing in * the software interrupt portion of the driver. @@ -128,25 +131,16 @@ uart_update_mctrl(struct uart_port *port, unsigned int set, unsigned int clear) * Startup the port. This will be called once per open. All calls * will be serialised by the per-port mutex. */ -static int uart_startup(struct tty_struct *tty, struct uart_state *state, int init_hw) +static int uart_port_startup(struct tty_struct *tty, struct uart_state *state, + int init_hw) { struct uart_port *uport = state->uart_port; struct tty_port *port = &state->port; unsigned long page; int retval = 0; - if (port->flags & ASYNC_INITIALIZED) - return 0; - - /* - * Set the TTY IO error marker - we will only clear this - * once we have successfully opened the port. Also set - * up the tty->alt_speed kludge - */ - set_bit(TTY_IO_ERROR, &tty->flags); - if (uport->type == PORT_UNKNOWN) - return 0; + return 1; /* * Initialise and allocate the transmit and temporary @@ -188,10 +182,6 @@ static int uart_startup(struct tty_struct *tty, struct uart_state *state, int in tty->hw_stopped = 1; spin_unlock_irq(&uport->lock); } - - set_bit(ASYNCB_INITIALIZED, &port->flags); - - clear_bit(TTY_IO_ERROR, &tty->flags); } /* @@ -200,6 +190,31 @@ static int uart_startup(struct tty_struct *tty, struct uart_state *state, int in * now. */ if (retval && capable(CAP_SYS_ADMIN)) + return 1; + + return retval; +} + +static int uart_startup(struct tty_struct *tty, struct uart_state *state, + int init_hw) +{ + struct tty_port *port = &state->port; + int retval; + + if (port->flags & ASYNC_INITIALIZED) + return 0; + + /* + * Set the TTY IO error marker - we will only clear this + * once we have successfully opened the port. + */ + set_bit(TTY_IO_ERROR, &tty->flags); + + retval = uart_port_startup(tty, state, init_hw); + if (!retval) { + set_bit(ASYNCB_INITIALIZED, &port->flags); + clear_bit(TTY_IO_ERROR, &tty->flags); + } else if (retval > 0) retval = 0; return retval; @@ -228,24 +243,7 @@ static void uart_shutdown(struct tty_struct *tty, struct uart_state *state) if (!tty || (tty->termios->c_cflag & HUPCL)) uart_clear_mctrl(uport, TIOCM_DTR | TIOCM_RTS); - /* - * clear delta_msr_wait queue to avoid mem leaks: we may free - * the irq here so the queue might never be woken up. Note - * that we won't end up waiting on delta_msr_wait again since - * any outstanding file descriptors should be pointing at - * hung_up_tty_fops now. - */ - wake_up_interruptible(&port->delta_msr_wait); - - /* - * Free the IRQ and disable the port. - */ - uport->ops->shutdown(uport); - - /* - * Ensure that the IRQ handler isn't running on another CPU. - */ - synchronize_irq(uport->irq); + uart_port_shutdown(port); } /* @@ -423,7 +421,7 @@ uart_get_divisor(struct uart_port *port, unsigned int baud) if (baud == 38400 && (port->flags & UPF_SPD_MASK) == UPF_SPD_CUST) quot = port->custom_divisor; else - quot = (port->uartclk + (8 * baud)) / (16 * baud); + quot = DIV_ROUND_CLOSEST(port->uartclk, 16 * baud); return quot; } @@ -658,10 +656,10 @@ static int uart_get_info(struct uart_state *state, tmp.flags = uport->flags; tmp.xmit_fifo_size = uport->fifosize; tmp.baud_base = uport->uartclk / 16; - tmp.close_delay = port->close_delay / 10; + tmp.close_delay = jiffies_to_msecs(port->close_delay) / 10; tmp.closing_wait = port->closing_wait == ASYNC_CLOSING_WAIT_NONE ? ASYNC_CLOSING_WAIT_NONE : - port->closing_wait / 10; + jiffies_to_msecs(port->closing_wait) / 10; tmp.custom_divisor = uport->custom_divisor; tmp.hub6 = uport->hub6; tmp.io_type = uport->iotype; @@ -695,9 +693,10 @@ static int uart_set_info(struct tty_struct *tty, struct uart_state *state, new_port += (unsigned long) new_serial.port_high << HIGH_BITS_OFFSET; new_serial.irq = irq_canonicalize(new_serial.irq); - close_delay = new_serial.close_delay * 10; + close_delay = msecs_to_jiffies(new_serial.close_delay * 10); closing_wait = new_serial.closing_wait == ASYNC_CLOSING_WAIT_NONE ? - ASYNC_CLOSING_WAIT_NONE : new_serial.closing_wait * 10; + ASYNC_CLOSING_WAIT_NONE : + msecs_to_jiffies(new_serial.closing_wait * 10); /* * This semaphore protects port->count. It is also @@ -1265,47 +1264,8 @@ static void uart_close(struct tty_struct *tty, struct file *filp) pr_debug("uart_close(%d) called\n", uport->line); - spin_lock_irqsave(&port->lock, flags); - - if (tty_hung_up_p(filp)) { - spin_unlock_irqrestore(&port->lock, flags); + if (tty_port_close_start(port, tty, filp) == 0) return; - } - - if ((tty->count == 1) && (port->count != 1)) { - /* - * Uh, oh. tty->count is 1, which means that the tty - * structure will be freed. port->count should always - * be one in these conditions. If it's greater than - * one, we've got real problems, since it means the - * serial port won't be shutdown. - */ - printk(KERN_ERR "uart_close: bad serial port count; tty->count is 1, " - "port->count is %d\n", port->count); - port->count = 1; - } - if (--port->count < 0) { - printk(KERN_ERR "uart_close: bad serial port count for %s: %d\n", - tty->name, port->count); - port->count = 0; - } - if (port->count) { - spin_unlock_irqrestore(&port->lock, flags); - return; - } - - /* - * Now we wait for the transmit buffer to clear; and we notify - * the line discipline to only process XON/XOFF characters by - * setting tty->closing. - */ - set_bit(ASYNCB_CLOSING, &port->flags); - tty->closing = 1; - spin_unlock_irqrestore(&port->lock, flags); - - if (port->closing_wait != ASYNC_CLOSING_WAIT_NONE) - tty_wait_until_sent_from_close(tty, - msecs_to_jiffies(port->closing_wait)); /* * At this point, we stop accepting input. To do this, we @@ -1337,7 +1297,8 @@ static void uart_close(struct tty_struct *tty, struct file *filp) if (port->blocked_open) { spin_unlock_irqrestore(&port->lock, flags); if (port->close_delay) - msleep_interruptible(port->close_delay); + msleep_interruptible( + jiffies_to_msecs(port->close_delay)); spin_lock_irqsave(&port->lock, flags); } else if (!uart_console(uport)) { spin_unlock_irqrestore(&port->lock, flags); @@ -1441,6 +1402,36 @@ static void uart_hangup(struct tty_struct *tty) mutex_unlock(&port->mutex); } +static int uart_port_activate(struct tty_port *port, struct tty_struct *tty) +{ + return 0; +} + +static void uart_port_shutdown(struct tty_port *port) +{ + struct uart_state *state = container_of(port, struct uart_state, port); + struct uart_port *uport = state->uart_port; + + /* + * clear delta_msr_wait queue to avoid mem leaks: we may free + * the irq here so the queue might never be woken up. Note + * that we won't end up waiting on delta_msr_wait again since + * any outstanding file descriptors should be pointing at + * hung_up_tty_fops now. + */ + wake_up_interruptible(&port->delta_msr_wait); + + /* + * Free the IRQ and disable the port. + */ + uport->ops->shutdown(uport); + + /* + * Ensure that the IRQ handler isn't running on another CPU. + */ + synchronize_irq(uport->irq); +} + static int uart_carrier_raised(struct tty_port *port) { struct uart_state *state = container_of(port, struct uart_state, port); @@ -1466,33 +1457,6 @@ static void uart_dtr_rts(struct tty_port *port, int onoff) uart_clear_mctrl(uport, TIOCM_DTR | TIOCM_RTS); } -static struct uart_state *uart_get(struct uart_driver *drv, int line) -{ - struct uart_state *state; - struct tty_port *port; - int ret = 0; - - state = drv->state + line; - port = &state->port; - if (mutex_lock_interruptible(&port->mutex)) { - ret = -ERESTARTSYS; - goto err; - } - - port->count++; - if (!state->uart_port || state->uart_port->flags & UPF_DEAD) { - ret = -ENXIO; - goto err_unlock; - } - return state; - - err_unlock: - port->count--; - mutex_unlock(&port->mutex); - err: - return ERR_PTR(ret); -} - /* * calls to uart_open are serialised by the BKL in * fs/char_dev.c:chrdev_open() @@ -1506,26 +1470,29 @@ static struct uart_state *uart_get(struct uart_driver *drv, int line) static int uart_open(struct tty_struct *tty, struct file *filp) { struct uart_driver *drv = (struct uart_driver *)tty->driver->driver_state; - struct uart_state *state; - struct tty_port *port; int retval, line = tty->index; + struct uart_state *state = drv->state + line; + struct tty_port *port = &state->port; pr_debug("uart_open(%d) called\n", line); /* - * We take the semaphore inside uart_get to guarantee that we won't - * be re-entered while allocating the state structure, or while we - * request any IRQs that the driver may need. This also has the nice - * side-effect that it delays the action of uart_hangup, so we can - * guarantee that state->port.tty will always contain something - * reasonable. + * We take the semaphore here to guarantee that we won't be re-entered + * while allocating the state structure, or while we request any IRQs + * that the driver may need. This also has the nice side-effect that + * it delays the action of uart_hangup, so we can guarantee that + * state->port.tty will always contain something reasonable. */ - state = uart_get(drv, line); - if (IS_ERR(state)) { - retval = PTR_ERR(state); - goto fail; + if (mutex_lock_interruptible(&port->mutex)) { + retval = -ERESTARTSYS; + goto end; + } + + port->count++; + if (!state->uart_port || state->uart_port->flags & UPF_DEAD) { + retval = -ENXIO; + goto err_dec_count; } - port = &state->port; /* * Once we set tty->driver_data here, we are guaranteed that @@ -1535,7 +1502,6 @@ static int uart_open(struct tty_struct *tty, struct file *filp) tty->driver_data = state; state->uart_port->state = state; tty->low_latency = (state->uart_port->flags & UPF_LOW_LATENCY) ? 1 : 0; - tty->alt_speed = 0; tty_port_tty_set(port, tty); /* @@ -1543,9 +1509,7 @@ static int uart_open(struct tty_struct *tty, struct file *filp) */ if (tty_hung_up_p(filp)) { retval = -EAGAIN; - port->count--; - mutex_unlock(&port->mutex); - goto fail; + goto err_dec_count; } /* @@ -1566,8 +1530,12 @@ static int uart_open(struct tty_struct *tty, struct file *filp) if (retval == 0) retval = tty_port_block_til_ready(port, tty, filp); -fail: +end: return retval; +err_dec_count: + port->count--; + mutex_unlock(&port->mutex); + goto end; } static const char *uart_type(struct uart_port *port) @@ -1858,6 +1826,14 @@ uart_set_options(struct uart_port *port, struct console *co, EXPORT_SYMBOL_GPL(uart_set_options); #endif /* CONFIG_SERIAL_CORE_CONSOLE */ +/** + * uart_change_pm - set power state of the port + * + * @state: port descriptor + * @pm_state: new state + * + * Locking: port->mutex has to be held + */ static void uart_change_pm(struct uart_state *state, int pm_state) { struct uart_port *port = state->uart_port; @@ -2214,6 +2190,8 @@ static const struct tty_operations uart_ops = { }; static const struct tty_port_operations uart_port_ops = { + .activate = uart_port_activate, + .shutdown = uart_port_shutdown, .carrier_raised = uart_carrier_raised, .dtr_rts = uart_dtr_rts, }; @@ -2275,8 +2253,8 @@ int uart_register_driver(struct uart_driver *drv) tty_port_init(port); port->ops = &uart_port_ops; - port->close_delay = 500; /* .5 seconds */ - port->closing_wait = 30000; /* 30 seconds */ + port->close_delay = HZ / 2; /* .5 seconds */ + port->closing_wait = 30 * HZ;/* 30 seconds */ } retval = tty_register_driver(normal); @@ -2467,6 +2445,99 @@ int uart_match_port(struct uart_port *port1, struct uart_port *port2) } EXPORT_SYMBOL(uart_match_port); +/** + * uart_handle_dcd_change - handle a change of carrier detect state + * @uport: uart_port structure for the open port + * @status: new carrier detect status, nonzero if active + */ +void uart_handle_dcd_change(struct uart_port *uport, unsigned int status) +{ + struct uart_state *state = uport->state; + struct tty_port *port = &state->port; + struct tty_ldisc *ld = tty_ldisc_ref(port->tty); + struct pps_event_time ts; + + if (ld && ld->ops->dcd_change) + pps_get_ts(&ts); + + uport->icount.dcd++; +#ifdef CONFIG_HARD_PPS + if ((uport->flags & UPF_HARDPPS_CD) && status) + hardpps(); +#endif + + if (port->flags & ASYNC_CHECK_CD) { + if (status) + wake_up_interruptible(&port->open_wait); + else if (port->tty) + tty_hangup(port->tty); + } + + if (ld && ld->ops->dcd_change) + ld->ops->dcd_change(port->tty, status, &ts); + if (ld) + tty_ldisc_deref(ld); +} +EXPORT_SYMBOL_GPL(uart_handle_dcd_change); + +/** + * uart_handle_cts_change - handle a change of clear-to-send state + * @uport: uart_port structure for the open port + * @status: new clear to send status, nonzero if active + */ +void uart_handle_cts_change(struct uart_port *uport, unsigned int status) +{ + struct tty_port *port = &uport->state->port; + struct tty_struct *tty = port->tty; + + uport->icount.cts++; + + if (port->flags & ASYNC_CTS_FLOW) { + if (tty->hw_stopped) { + if (status) { + tty->hw_stopped = 0; + uport->ops->start_tx(uport); + uart_write_wakeup(uport); + } + } else { + if (!status) { + tty->hw_stopped = 1; + uport->ops->stop_tx(uport); + } + } + } +} +EXPORT_SYMBOL_GPL(uart_handle_cts_change); + +/** + * uart_insert_char - push a char to the uart layer + * + * User is responsible to call tty_flip_buffer_push when they are done with + * insertion. + * + * @port: corresponding port + * @status: state of the serial port RX buffer (LSR for 8250) + * @overrun: mask of overrun bits in @status + * @ch: character to push + * @flag: flag for the character (see TTY_NORMAL and friends) + */ +void uart_insert_char(struct uart_port *port, unsigned int status, + unsigned int overrun, unsigned int ch, unsigned int flag) +{ + struct tty_struct *tty = port->state->port.tty; + + if ((status & port->ignore_status_mask & ~overrun) == 0) + tty_insert_flip_char(tty, ch, flag); + + /* + * Overrun is special. Since it's reported immediately, + * it doesn't affect the current character. + */ + if (status & ~port->ignore_status_mask & overrun) + tty_insert_flip_char(tty, 0, TTY_OVERRUN); +} +EXPORT_SYMBOL_GPL(uart_insert_char); + EXPORT_SYMBOL(uart_write_wakeup); EXPORT_SYMBOL(uart_register_driver); EXPORT_SYMBOL(uart_unregister_driver); diff --git a/drivers/tty/serial/serial_cs.c b/drivers/tty/serial/serial_cs.c index eef736ff810a..86090605a84e 100644 --- a/drivers/tty/serial/serial_cs.c +++ b/drivers/tty/serial/serial_cs.c @@ -317,7 +317,7 @@ static int serial_probe(struct pcmcia_device *link) info->p_dev = link; link->priv = info; - link->config_flags |= CONF_ENABLE_IRQ; + link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO; if (do_sound) link->config_flags |= CONF_ENABLE_SPKR; @@ -445,7 +445,7 @@ static int simple_config(struct pcmcia_device *link) /* First pass: look for a config entry that looks normal. * Two tries: without IO aliases, then with aliases */ - link->config_flags |= CONF_AUTO_SET_VPP | CONF_AUTO_SET_IO; + link->config_flags |= CONF_AUTO_SET_VPP; for (try = 0; try < 4; try++) if (!pcmcia_loop_config(link, simple_config_check, &try)) goto found_port; @@ -501,7 +501,8 @@ static int multi_config_check_notpicky(struct pcmcia_device *p_dev, { int *base2 = priv_data; - if (!p_dev->resource[0]->end || !p_dev->resource[1]->end) + if (!p_dev->resource[0]->end || !p_dev->resource[1]->end || + p_dev->resource[0]->start + 8 != p_dev->resource[1]->start) return -ENODEV; p_dev->resource[0]->end = p_dev->resource[1]->end = 8; @@ -520,7 +521,6 @@ static int multi_config(struct pcmcia_device *link) struct serial_info *info = link->priv; int i, base2 = 0; - link->config_flags |= CONF_AUTO_SET_IO; /* First, look for a generic full-sized window */ if (!pcmcia_loop_config(link, multi_config_check, &info->multi)) base2 = link->resource[0]->start + 8; diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c index aff9d612dff0..9e62349b3d9f 100644 --- a/drivers/tty/serial/sh-sci.c +++ b/drivers/tty/serial/sh-sci.c @@ -50,6 +50,7 @@ #include <linux/dma-mapping.h> #include <linux/scatterlist.h> #include <linux/slab.h> +#include <linux/gpio.h> #ifdef CONFIG_SUPERH #include <asm/sh_bios.h> @@ -73,6 +74,7 @@ struct sci_port { struct clk *fclk; char *irqstr[SCIx_NR_IRQS]; + char *gpiostr[SCIx_NR_FNS]; struct dma_chan *chan_tx; struct dma_chan *chan_rx; @@ -474,8 +476,15 @@ static void sci_init_pins(struct uart_port *port, unsigned int cflag) if (!reg->size) return; - if (!(cflag & CRTSCTS)) - sci_out(port, SCSPTR, 0x0080); /* Set RTS = 1 */ + if ((s->cfg->capabilities & SCIx_HAVE_RTSCTS) && + ((!(cflag & CRTSCTS)))) { + unsigned short status; + + status = sci_in(port, SCSPTR); + status &= ~SCSPTR_CTSIO; + status |= SCSPTR_RTSIO; + sci_out(port, SCSPTR, status); /* Set RTS = 1 */ + } } static int sci_txfill(struct uart_port *port) @@ -621,6 +630,7 @@ static void sci_receive_chars(struct uart_port *port) } else { for (i = 0; i < count; i++) { char c = sci_in(port, SCxRDR); + status = sci_in(port, SCxSR); #if defined(CONFIG_CPU_SH3) /* Skip "chars" during break */ @@ -649,9 +659,11 @@ static void sci_receive_chars(struct uart_port *port) /* Store data and status */ if (status & SCxSR_FER(port)) { flag = TTY_FRAME; + port->icount.frame++; dev_notice(port->dev, "frame error\n"); } else if (status & SCxSR_PER(port)) { flag = TTY_PARITY; + port->icount.parity++; dev_notice(port->dev, "parity error\n"); } else flag = TTY_NORMAL; @@ -723,6 +735,8 @@ static int sci_handle_errors(struct uart_port *port) */ if (s->cfg->overrun_bit != SCIx_NOT_SUPPORTED) { if (status & (1 << s->cfg->overrun_bit)) { + port->icount.overrun++; + /* overrun error */ if (tty_insert_flip_char(tty, 0, TTY_OVERRUN)) copied++; @@ -737,6 +751,8 @@ static int sci_handle_errors(struct uart_port *port) struct sci_port *sci_port = to_sci_port(port); if (!sci_port->break_flag) { + port->icount.brk++; + sci_port->break_flag = 1; sci_schedule_break_timer(sci_port); @@ -752,6 +768,8 @@ static int sci_handle_errors(struct uart_port *port) } else { /* frame error */ + port->icount.frame++; + if (tty_insert_flip_char(tty, 0, TTY_FRAME)) copied++; @@ -761,6 +779,8 @@ static int sci_handle_errors(struct uart_port *port) if (status & SCxSR_PER(port)) { /* parity error */ + port->icount.parity++; + if (tty_insert_flip_char(tty, 0, TTY_PARITY)) copied++; @@ -787,6 +807,8 @@ static int sci_handle_fifo_overrun(struct uart_port *port) if ((sci_in(port, SCLSR) & (1 << s->cfg->overrun_bit))) { sci_out(port, SCLSR, 0); + port->icount.overrun++; + tty_insert_flip_char(tty, 0, TTY_OVERRUN); tty_flip_buffer_push(tty); @@ -812,6 +834,9 @@ static int sci_handle_breaks(struct uart_port *port) /* Debounce break */ s->break_flag = 1; #endif + + port->icount.brk++; + /* Notify of BREAK */ if (tty_insert_flip_char(tty, 0, TTY_BREAK)) copied++; @@ -1082,6 +1107,67 @@ static void sci_free_irq(struct sci_port *port) } } +static const char *sci_gpio_names[SCIx_NR_FNS] = { + "sck", "rxd", "txd", "cts", "rts", +}; + +static const char *sci_gpio_str(unsigned int index) +{ + return sci_gpio_names[index]; +} + +static void __devinit sci_init_gpios(struct sci_port *port) +{ + struct uart_port *up = &port->port; + int i; + + if (!port->cfg) + return; + + for (i = 0; i < SCIx_NR_FNS; i++) { + const char *desc; + int ret; + + if (!port->cfg->gpios[i]) + continue; + + desc = sci_gpio_str(i); + + port->gpiostr[i] = kasprintf(GFP_KERNEL, "%s:%s", + dev_name(up->dev), desc); + + /* + * If we've failed the allocation, we can still continue + * on with a NULL string. + */ + if (!port->gpiostr[i]) + dev_notice(up->dev, "%s string allocation failure\n", + desc); + + ret = gpio_request(port->cfg->gpios[i], port->gpiostr[i]); + if (unlikely(ret != 0)) { + dev_notice(up->dev, "failed %s gpio request\n", desc); + + /* + * If we can't get the GPIO for whatever reason, + * no point in keeping the verbose string around. + */ + kfree(port->gpiostr[i]); + } + } +} + +static void sci_free_gpios(struct sci_port *port) +{ + int i; + + for (i = 0; i < SCIx_NR_FNS; i++) + if (port->cfg->gpios[i]) { + gpio_free(port->cfg->gpios[i]); + kfree(port->gpiostr[i]); + } +} + static unsigned int sci_tx_empty(struct uart_port *port) { unsigned short status = sci_in(port, SCxSR); @@ -1090,19 +1176,39 @@ static unsigned int sci_tx_empty(struct uart_port *port) return (status & SCxSR_TEND(port)) && !in_tx_fifo ? TIOCSER_TEMT : 0; } +/* + * Modem control is a bit of a mixed bag for SCI(F) ports. Generally + * CTS/RTS is supported in hardware by at least one port and controlled + * via SCSPTR (SCxPCR for SCIFA/B parts), or external pins (presently + * handled via the ->init_pins() op, which is a bit of a one-way street, + * lacking any ability to defer pin control -- this will later be + * converted over to the GPIO framework). + * + * Other modes (such as loopback) are supported generically on certain + * port types, but not others. For these it's sufficient to test for the + * existence of the support register and simply ignore the port type. + */ static void sci_set_mctrl(struct uart_port *port, unsigned int mctrl) { - /* This routine is used for seting signals of: DTR, DCD, CTS/RTS */ - /* We use SCIF's hardware for CTS/RTS, so don't need any for that. */ - /* If you have signals for DTR and DCD, please implement here. */ + if (mctrl & TIOCM_LOOP) { + struct plat_sci_reg *reg; + + /* + * Standard loopback mode for SCFCR ports. + */ + reg = sci_getreg(port, SCFCR); + if (reg->size) + sci_out(port, SCFCR, sci_in(port, SCFCR) | 1); + } } static unsigned int sci_get_mctrl(struct uart_port *port) { - /* This routine is used for getting signals of: DTR, DCD, DSR, RI, - and CTS/RTS */ - - return TIOCM_DTR | TIOCM_RTS | TIOCM_CTS | TIOCM_DSR; + /* + * CTS/RTS is handled in hardware when supported, while nothing + * else is wired up. Keep it simple and simply assert DSR/CAR. + */ + return TIOCM_DSR | TIOCM_CAR; } #ifdef CONFIG_SERIAL_SH_SCI_DMA @@ -1449,12 +1555,17 @@ static void sci_stop_rx(struct uart_port *port) static void sci_enable_ms(struct uart_port *port) { - /* Nothing here yet .. */ + /* + * Not supported by hardware, always a nop. + */ } static void sci_break_ctl(struct uart_port *port, int break_state) { - /* Nothing here yet .. */ + /* + * Not supported by hardware. Most parts couple break and rx + * interrupts together, with break detection always enabled. + */ } #ifdef CONFIG_SERIAL_SH_SCI_DMA @@ -1652,6 +1763,7 @@ static unsigned int sci_scbrr_calc(unsigned int algo_id, unsigned int bps, static void sci_reset(struct uart_port *port) { + struct plat_sci_reg *reg; unsigned int status; do { @@ -1660,7 +1772,8 @@ static void sci_reset(struct uart_port *port) sci_out(port, SCSCR, 0x00); /* TE=0, RE=0, CKE1=0 */ - if (port->type != PORT_SCI) + reg = sci_getreg(port, SCFCR); + if (reg->size) sci_out(port, SCFCR, SCFCR_RFRST | SCFCR_TFRST); } @@ -1668,9 +1781,9 @@ static void sci_set_termios(struct uart_port *port, struct ktermios *termios, struct ktermios *old) { struct sci_port *s = to_sci_port(port); + struct plat_sci_reg *reg; unsigned int baud, smr_val, max_baud; int t = -1; - u16 scfcr = 0; /* * earlyprintk comes here early on with port->uartclk set to zero. @@ -1720,7 +1833,27 @@ static void sci_set_termios(struct uart_port *port, struct ktermios *termios, } sci_init_pins(port, termios->c_cflag); - sci_out(port, SCFCR, scfcr | ((termios->c_cflag & CRTSCTS) ? SCFCR_MCE : 0)); + + reg = sci_getreg(port, SCFCR); + if (reg->size) { + unsigned short ctrl = sci_in(port, SCFCR); + + if (s->cfg->capabilities & SCIx_HAVE_RTSCTS) { + if (termios->c_cflag & CRTSCTS) + ctrl |= SCFCR_MCE; + else + ctrl &= ~SCFCR_MCE; + } + + /* + * As we've done a sci_reset() above, ensure we don't + * interfere with the FIFOs while toggling MCE. As the + * reset values could still be set, simply mask them out. + */ + ctrl &= ~(SCFCR_RFRST | SCFCR_TFRST); + + sci_out(port, SCFCR, ctrl); + } sci_out(port, SCSCR, s->cfg->scscr); @@ -1892,6 +2025,8 @@ static int __devinit sci_init_single(struct platform_device *dev, struct uart_port *port = &sci_port->port; int ret; + sci_port->cfg = p; + port->ops = &sci_uart_ops; port->iotype = UPIO_MEM; port->line = index; @@ -1937,6 +2072,8 @@ static int __devinit sci_init_single(struct platform_device *dev, port->dev = &dev->dev; + sci_init_gpios(sci_port); + pm_runtime_irq_safe(&dev->dev); pm_runtime_enable(&dev->dev); } @@ -1971,8 +2108,6 @@ static int __devinit sci_init_single(struct platform_device *dev, p->error_mask |= (1 << p->overrun_bit); } - sci_port->cfg = p; - port->mapbase = p->mapbase; port->type = p->type; port->flags = p->flags; @@ -2113,9 +2248,16 @@ static int sci_runtime_suspend(struct device *dev) struct uart_port *port = &sci_port->port; if (uart_console(port)) { + struct plat_sci_reg *reg; + sci_port->saved_smr = sci_in(port, SCSMR); sci_port->saved_brr = sci_in(port, SCBRR); - sci_port->saved_fcr = sci_in(port, SCFCR); + + reg = sci_getreg(port, SCFCR); + if (reg->size) + sci_port->saved_fcr = sci_in(port, SCFCR); + else + sci_port->saved_fcr = 0; } return 0; } @@ -2129,7 +2271,10 @@ static int sci_runtime_resume(struct device *dev) sci_reset(port); sci_out(port, SCSMR, sci_port->saved_smr); sci_out(port, SCBRR, sci_port->saved_brr); - sci_out(port, SCFCR, sci_port->saved_fcr); + + if (sci_port->saved_fcr) + sci_out(port, SCFCR, sci_port->saved_fcr); + sci_out(port, SCSCR, sci_port->cfg->scscr); } return 0; @@ -2169,6 +2314,8 @@ static int sci_remove(struct platform_device *dev) cpufreq_unregister_notifier(&port->freq_transition, CPUFREQ_TRANSITION_NOTIFIER); + sci_free_gpios(port); + uart_remove_one_port(&sci_uart_driver, &port->port); clk_put(port->iclk); diff --git a/drivers/tty/serial/sirfsoc_uart.c b/drivers/tty/serial/sirfsoc_uart.c new file mode 100644 index 000000000000..a60523fee11b --- /dev/null +++ b/drivers/tty/serial/sirfsoc_uart.c @@ -0,0 +1,783 @@ +/* + * Driver for CSR SiRFprimaII onboard UARTs. + * + * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company. + * + * Licensed under GPLv2 or later. + */ + +#include <linux/module.h> +#include <linux/ioport.h> +#include <linux/platform_device.h> +#include <linux/init.h> +#include <linux/sysrq.h> +#include <linux/console.h> +#include <linux/tty.h> +#include <linux/tty_flip.h> +#include <linux/serial_core.h> +#include <linux/serial.h> +#include <linux/clk.h> +#include <linux/of.h> +#include <linux/slab.h> +#include <linux/io.h> +#include <asm/irq.h> +#include <asm/mach/irq.h> +#include <linux/pinctrl/pinmux.h> + +#include "sirfsoc_uart.h" + +static unsigned int +sirfsoc_uart_pio_tx_chars(struct sirfsoc_uart_port *sirfport, int count); +static unsigned int +sirfsoc_uart_pio_rx_chars(struct uart_port *port, unsigned int max_rx_count); +static struct uart_driver sirfsoc_uart_drv; + +static const struct sirfsoc_baudrate_to_regv baudrate_to_regv[] = { + {4000000, 2359296}, + {3500000, 1310721}, + {3000000, 1572865}, + {2500000, 1245186}, + {2000000, 1572866}, + {1500000, 1245188}, + {1152000, 1638404}, + {1000000, 1572869}, + {921600, 1114120}, + {576000, 1245196}, + {500000, 1245198}, + {460800, 1572876}, + {230400, 1310750}, + {115200, 1310781}, + {57600, 1310843}, + {38400, 1114328}, + {19200, 1114545}, + {9600, 1114979}, +}; + +static struct sirfsoc_uart_port sirfsoc_uart_ports[SIRFSOC_UART_NR] = { + [0] = { + .port = { + .iotype = UPIO_MEM, + .flags = UPF_BOOT_AUTOCONF, + .line = 0, + }, + }, + [1] = { + .port = { + .iotype = UPIO_MEM, + .flags = UPF_BOOT_AUTOCONF, + .line = 1, + }, + }, + [2] = { + .port = { + .iotype = UPIO_MEM, + .flags = UPF_BOOT_AUTOCONF, + .line = 2, + }, + }, +}; + +static inline struct sirfsoc_uart_port *to_sirfport(struct uart_port *port) +{ + return container_of(port, struct sirfsoc_uart_port, port); +} + +static inline unsigned int sirfsoc_uart_tx_empty(struct uart_port *port) +{ + unsigned long reg; + reg = rd_regl(port, SIRFUART_TX_FIFO_STATUS); + if (reg & SIRFUART_FIFOEMPTY_MASK(port)) + return TIOCSER_TEMT; + else + return 0; +} + +static unsigned int sirfsoc_uart_get_mctrl(struct uart_port *port) +{ + struct sirfsoc_uart_port *sirfport = to_sirfport(port); + if (!(sirfport->ms_enabled)) { + goto cts_asserted; + } else if (sirfport->hw_flow_ctrl) { + if (!(rd_regl(port, SIRFUART_AFC_CTRL) & + SIRFUART_CTS_IN_STATUS)) + goto cts_asserted; + else + goto cts_deasserted; + } +cts_deasserted: + return TIOCM_CAR | TIOCM_DSR; +cts_asserted: + return TIOCM_CAR | TIOCM_DSR | TIOCM_CTS; +} + +static void sirfsoc_uart_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + struct sirfsoc_uart_port *sirfport = to_sirfport(port); + unsigned int assert = mctrl & TIOCM_RTS; + unsigned int val = assert ? SIRFUART_AFC_CTRL_RX_THD : 0x0; + unsigned int current_val; + if (sirfport->hw_flow_ctrl) { + current_val = rd_regl(port, SIRFUART_AFC_CTRL) & ~0xFF; + val |= current_val; + wr_regl(port, SIRFUART_AFC_CTRL, val); + } +} + +static void sirfsoc_uart_stop_tx(struct uart_port *port) +{ + unsigned int regv; + regv = rd_regl(port, SIRFUART_INT_EN); + wr_regl(port, SIRFUART_INT_EN, regv & ~SIRFUART_TX_INT_EN); +} + +void sirfsoc_uart_start_tx(struct uart_port *port) +{ + struct sirfsoc_uart_port *sirfport = to_sirfport(port); + unsigned long regv; + sirfsoc_uart_pio_tx_chars(sirfport, 1); + wr_regl(port, SIRFUART_TX_FIFO_OP, SIRFUART_TX_FIFO_START); + regv = rd_regl(port, SIRFUART_INT_EN); + wr_regl(port, SIRFUART_INT_EN, regv | SIRFUART_TX_INT_EN); +} + +static void sirfsoc_uart_stop_rx(struct uart_port *port) +{ + unsigned long regv; + wr_regl(port, SIRFUART_RX_FIFO_OP, 0); + regv = rd_regl(port, SIRFUART_INT_EN); + wr_regl(port, SIRFUART_INT_EN, regv & ~SIRFUART_RX_IO_INT_EN); +} + +static void sirfsoc_uart_disable_ms(struct uart_port *port) +{ + struct sirfsoc_uart_port *sirfport = to_sirfport(port); + unsigned long reg; + sirfport->ms_enabled = 0; + if (!sirfport->hw_flow_ctrl) + return; + reg = rd_regl(port, SIRFUART_AFC_CTRL); + wr_regl(port, SIRFUART_AFC_CTRL, reg & ~0x3FF); + reg = rd_regl(port, SIRFUART_INT_EN); + wr_regl(port, SIRFUART_INT_EN, reg & ~SIRFUART_CTS_INT_EN); +} + +static void sirfsoc_uart_enable_ms(struct uart_port *port) +{ + struct sirfsoc_uart_port *sirfport = to_sirfport(port); + unsigned long reg; + unsigned long flg; + if (!sirfport->hw_flow_ctrl) + return; + flg = SIRFUART_AFC_RX_EN | SIRFUART_AFC_TX_EN; + reg = rd_regl(port, SIRFUART_AFC_CTRL); + wr_regl(port, SIRFUART_AFC_CTRL, reg | flg); + reg = rd_regl(port, SIRFUART_INT_EN); + wr_regl(port, SIRFUART_INT_EN, reg | SIRFUART_CTS_INT_EN); + uart_handle_cts_change(port, + !(rd_regl(port, SIRFUART_AFC_CTRL) & SIRFUART_CTS_IN_STATUS)); + sirfport->ms_enabled = 1; +} + +static void sirfsoc_uart_break_ctl(struct uart_port *port, int break_state) +{ + unsigned long ulcon = rd_regl(port, SIRFUART_LINE_CTRL); + if (break_state) + ulcon |= SIRFUART_SET_BREAK; + else + ulcon &= ~SIRFUART_SET_BREAK; + wr_regl(port, SIRFUART_LINE_CTRL, ulcon); +} + +static unsigned int +sirfsoc_uart_pio_rx_chars(struct uart_port *port, unsigned int max_rx_count) +{ + unsigned int ch, rx_count = 0; + struct tty_struct *tty; + + tty = tty_port_tty_get(&port->state->port); + if (!tty) + return -ENODEV; + + while (!(rd_regl(port, SIRFUART_RX_FIFO_STATUS) & + SIRFUART_FIFOEMPTY_MASK(port))) { + ch = rd_regl(port, SIRFUART_RX_FIFO_DATA) | SIRFUART_DUMMY_READ; + if (unlikely(uart_handle_sysrq_char(port, ch))) + continue; + uart_insert_char(port, 0, 0, ch, TTY_NORMAL); + rx_count++; + if (rx_count >= max_rx_count) + break; + } + + port->icount.rx += rx_count; + tty_flip_buffer_push(tty); + tty_kref_put(tty); + + return rx_count; +} + +static unsigned int +sirfsoc_uart_pio_tx_chars(struct sirfsoc_uart_port *sirfport, int count) +{ + struct uart_port *port = &sirfport->port; + struct circ_buf *xmit = &port->state->xmit; + unsigned int num_tx = 0; + while (!uart_circ_empty(xmit) && + !(rd_regl(port, SIRFUART_TX_FIFO_STATUS) & + SIRFUART_FIFOFULL_MASK(port)) && + count--) { + wr_regl(port, SIRFUART_TX_FIFO_DATA, xmit->buf[xmit->tail]); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + port->icount.tx++; + num_tx++; + } + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(port); + return num_tx; +} + +static irqreturn_t sirfsoc_uart_isr(int irq, void *dev_id) +{ + unsigned long intr_status; + unsigned long cts_status; + unsigned long flag = TTY_NORMAL; + struct sirfsoc_uart_port *sirfport = (struct sirfsoc_uart_port *)dev_id; + struct uart_port *port = &sirfport->port; + struct uart_state *state = port->state; + struct circ_buf *xmit = &port->state->xmit; + intr_status = rd_regl(port, SIRFUART_INT_STATUS); + wr_regl(port, SIRFUART_INT_STATUS, intr_status); + intr_status &= rd_regl(port, SIRFUART_INT_EN); + if (unlikely(intr_status & (SIRFUART_ERR_INT_STAT))) { + if (intr_status & SIRFUART_RXD_BREAK) { + if (uart_handle_break(port)) + goto recv_char; + uart_insert_char(port, intr_status, + SIRFUART_RX_OFLOW, 0, TTY_BREAK); + return IRQ_HANDLED; + } + if (intr_status & SIRFUART_RX_OFLOW) + port->icount.overrun++; + if (intr_status & SIRFUART_FRM_ERR) { + port->icount.frame++; + flag = TTY_FRAME; + } + if (intr_status & SIRFUART_PARITY_ERR) + flag = TTY_PARITY; + wr_regl(port, SIRFUART_RX_FIFO_OP, SIRFUART_RX_FIFO_RESET); + wr_regl(port, SIRFUART_RX_FIFO_OP, 0); + wr_regl(port, SIRFUART_RX_FIFO_OP, SIRFUART_RX_FIFO_START); + intr_status &= port->read_status_mask; + uart_insert_char(port, intr_status, + SIRFUART_RX_OFLOW_INT, 0, flag); + } +recv_char: + if (intr_status & SIRFUART_CTS_INT_EN) { + cts_status = !(rd_regl(port, SIRFUART_AFC_CTRL) & + SIRFUART_CTS_IN_STATUS); + if (cts_status != 0) { + uart_handle_cts_change(port, 1); + } else { + uart_handle_cts_change(port, 0); + wake_up_interruptible(&state->port.delta_msr_wait); + } + } + if (intr_status & SIRFUART_RX_IO_INT_EN) + sirfsoc_uart_pio_rx_chars(port, SIRFSOC_UART_IO_RX_MAX_CNT); + if (intr_status & SIRFUART_TX_INT_EN) { + if (uart_circ_empty(xmit) || uart_tx_stopped(port)) { + return IRQ_HANDLED; + } else { + sirfsoc_uart_pio_tx_chars(sirfport, + SIRFSOC_UART_IO_TX_REASONABLE_CNT); + if ((uart_circ_empty(xmit)) && + (rd_regl(port, SIRFUART_TX_FIFO_STATUS) & + SIRFUART_FIFOEMPTY_MASK(port))) + sirfsoc_uart_stop_tx(port); + } + } + return IRQ_HANDLED; +} + +static void sirfsoc_uart_start_rx(struct uart_port *port) +{ + unsigned long regv; + regv = rd_regl(port, SIRFUART_INT_EN); + wr_regl(port, SIRFUART_INT_EN, regv | SIRFUART_RX_IO_INT_EN); + wr_regl(port, SIRFUART_RX_FIFO_OP, SIRFUART_RX_FIFO_RESET); + wr_regl(port, SIRFUART_RX_FIFO_OP, 0); + wr_regl(port, SIRFUART_RX_FIFO_OP, SIRFUART_RX_FIFO_START); +} + +static unsigned int +sirfsoc_calc_sample_div(unsigned long baud_rate, + unsigned long ioclk_rate, unsigned long *setted_baud) +{ + unsigned long min_delta = ~0UL; + unsigned short sample_div; + unsigned int regv = 0; + unsigned long ioclk_div; + unsigned long baud_tmp; + int temp_delta; + + for (sample_div = SIRF_MIN_SAMPLE_DIV; + sample_div <= SIRF_MAX_SAMPLE_DIV; sample_div++) { + ioclk_div = (ioclk_rate / (baud_rate * (sample_div + 1))) - 1; + if (ioclk_div > SIRF_IOCLK_DIV_MAX) + continue; + baud_tmp = ioclk_rate / ((ioclk_div + 1) * (sample_div + 1)); + temp_delta = baud_tmp - baud_rate; + temp_delta = (temp_delta > 0) ? temp_delta : -temp_delta; + if (temp_delta < min_delta) { + regv = regv & (~SIRF_IOCLK_DIV_MASK); + regv = regv | ioclk_div; + regv = regv & (~SIRF_SAMPLE_DIV_MASK); + regv = regv | (sample_div << SIRF_SAMPLE_DIV_SHIFT); + min_delta = temp_delta; + *setted_baud = baud_tmp; + } + } + return regv; +} + +static void sirfsoc_uart_set_termios(struct uart_port *port, + struct ktermios *termios, + struct ktermios *old) +{ + struct sirfsoc_uart_port *sirfport = to_sirfport(port); + unsigned long ioclk_rate; + unsigned long config_reg = 0; + unsigned long baud_rate; + unsigned long setted_baud; + unsigned long flags; + unsigned long ic; + unsigned int clk_div_reg = 0; + unsigned long temp_reg_val; + unsigned long rx_time_out; + int threshold_div; + int temp; + + ioclk_rate = 150000000; + switch (termios->c_cflag & CSIZE) { + default: + case CS8: + config_reg |= SIRFUART_DATA_BIT_LEN_8; + break; + case CS7: + config_reg |= SIRFUART_DATA_BIT_LEN_7; + break; + case CS6: + config_reg |= SIRFUART_DATA_BIT_LEN_6; + break; + case CS5: + config_reg |= SIRFUART_DATA_BIT_LEN_5; + break; + } + if (termios->c_cflag & CSTOPB) + config_reg |= SIRFUART_STOP_BIT_LEN_2; + baud_rate = uart_get_baud_rate(port, termios, old, 0, 4000000); + spin_lock_irqsave(&port->lock, flags); + port->read_status_mask = SIRFUART_RX_OFLOW_INT; + port->ignore_status_mask = 0; + /* read flags */ + if (termios->c_iflag & INPCK) + port->read_status_mask |= + SIRFUART_FRM_ERR_INT | SIRFUART_PARITY_ERR_INT; + if (termios->c_iflag & (BRKINT | PARMRK)) + port->read_status_mask |= SIRFUART_RXD_BREAK_INT; + /* ignore flags */ + if (termios->c_iflag & IGNPAR) + port->ignore_status_mask |= + SIRFUART_FRM_ERR_INT | SIRFUART_PARITY_ERR_INT; + if ((termios->c_cflag & CREAD) == 0) + port->ignore_status_mask |= SIRFUART_DUMMY_READ; + /* enable parity if PARENB is set*/ + if (termios->c_cflag & PARENB) { + if (termios->c_cflag & CMSPAR) { + if (termios->c_cflag & PARODD) + config_reg |= SIRFUART_STICK_BIT_MARK; + else + config_reg |= SIRFUART_STICK_BIT_SPACE; + } else if (termios->c_cflag & PARODD) { + config_reg |= SIRFUART_STICK_BIT_ODD; + } else { + config_reg |= SIRFUART_STICK_BIT_EVEN; + } + } + /* Hardware Flow Control Settings */ + if (UART_ENABLE_MS(port, termios->c_cflag)) { + if (!sirfport->ms_enabled) + sirfsoc_uart_enable_ms(port); + } else { + if (sirfport->ms_enabled) + sirfsoc_uart_disable_ms(port); + } + + /* common rate: fast calculation */ + for (ic = 0; ic < SIRF_BAUD_RATE_SUPPORT_NR; ic++) + if (baud_rate == baudrate_to_regv[ic].baud_rate) + clk_div_reg = baudrate_to_regv[ic].reg_val; + setted_baud = baud_rate; + /* arbitary rate setting */ + if (unlikely(clk_div_reg == 0)) + clk_div_reg = sirfsoc_calc_sample_div(baud_rate, ioclk_rate, + &setted_baud); + wr_regl(port, SIRFUART_DIVISOR, clk_div_reg); + + if (tty_termios_baud_rate(termios)) + tty_termios_encode_baud_rate(termios, setted_baud, setted_baud); + + /* set receive timeout */ + rx_time_out = SIRFSOC_UART_RX_TIMEOUT(baud_rate, 20000); + rx_time_out = (rx_time_out > 0xFFFF) ? 0xFFFF : rx_time_out; + config_reg |= SIRFUART_RECV_TIMEOUT(rx_time_out); + temp_reg_val = rd_regl(port, SIRFUART_TX_FIFO_OP); + wr_regl(port, SIRFUART_RX_FIFO_OP, 0); + wr_regl(port, SIRFUART_TX_FIFO_OP, + temp_reg_val & ~SIRFUART_TX_FIFO_START); + wr_regl(port, SIRFUART_TX_DMA_IO_CTRL, SIRFUART_TX_MODE_IO); + wr_regl(port, SIRFUART_RX_DMA_IO_CTRL, SIRFUART_RX_MODE_IO); + wr_regl(port, SIRFUART_LINE_CTRL, config_reg); + + /* Reset Rx/Tx FIFO Threshold level for proper baudrate */ + if (baud_rate < 1000000) + threshold_div = 1; + else + threshold_div = 2; + temp = port->line == 1 ? 16 : 64; + wr_regl(port, SIRFUART_TX_FIFO_CTRL, temp / threshold_div); + wr_regl(port, SIRFUART_RX_FIFO_CTRL, temp / threshold_div); + temp_reg_val |= SIRFUART_TX_FIFO_START; + wr_regl(port, SIRFUART_TX_FIFO_OP, temp_reg_val); + uart_update_timeout(port, termios->c_cflag, baud_rate); + sirfsoc_uart_start_rx(port); + wr_regl(port, SIRFUART_TX_RX_EN, SIRFUART_TX_EN | SIRFUART_RX_EN); + spin_unlock_irqrestore(&port->lock, flags); +} + +static void startup_uart_controller(struct uart_port *port) +{ + unsigned long temp_regv; + int temp; + temp_regv = rd_regl(port, SIRFUART_TX_DMA_IO_CTRL); + wr_regl(port, SIRFUART_TX_DMA_IO_CTRL, temp_regv | SIRFUART_TX_MODE_IO); + temp_regv = rd_regl(port, SIRFUART_RX_DMA_IO_CTRL); + wr_regl(port, SIRFUART_RX_DMA_IO_CTRL, temp_regv | SIRFUART_RX_MODE_IO); + wr_regl(port, SIRFUART_TX_DMA_IO_LEN, 0); + wr_regl(port, SIRFUART_RX_DMA_IO_LEN, 0); + wr_regl(port, SIRFUART_TX_RX_EN, SIRFUART_RX_EN | SIRFUART_TX_EN); + wr_regl(port, SIRFUART_TX_FIFO_OP, SIRFUART_TX_FIFO_RESET); + wr_regl(port, SIRFUART_TX_FIFO_OP, 0); + wr_regl(port, SIRFUART_RX_FIFO_OP, SIRFUART_RX_FIFO_RESET); + wr_regl(port, SIRFUART_RX_FIFO_OP, 0); + temp = port->line == 1 ? 16 : 64; + wr_regl(port, SIRFUART_TX_FIFO_CTRL, temp); + wr_regl(port, SIRFUART_RX_FIFO_CTRL, temp); +} + +static int sirfsoc_uart_startup(struct uart_port *port) +{ + struct sirfsoc_uart_port *sirfport = to_sirfport(port); + unsigned int index = port->line; + int ret; + set_irq_flags(port->irq, IRQF_VALID | IRQF_NOAUTOEN); + ret = request_irq(port->irq, + sirfsoc_uart_isr, + 0, + SIRFUART_PORT_NAME, + sirfport); + if (ret != 0) { + dev_err(port->dev, "UART%d request IRQ line (%d) failed.\n", + index, port->irq); + goto irq_err; + } + startup_uart_controller(port); + enable_irq(port->irq); +irq_err: + return ret; +} + +static void sirfsoc_uart_shutdown(struct uart_port *port) +{ + struct sirfsoc_uart_port *sirfport = to_sirfport(port); + wr_regl(port, SIRFUART_INT_EN, 0); + free_irq(port->irq, sirfport); + if (sirfport->ms_enabled) { + sirfsoc_uart_disable_ms(port); + sirfport->ms_enabled = 0; + } +} + +static const char *sirfsoc_uart_type(struct uart_port *port) +{ + return port->type == SIRFSOC_PORT_TYPE ? SIRFUART_PORT_NAME : NULL; +} + +static int sirfsoc_uart_request_port(struct uart_port *port) +{ + void *ret; + ret = request_mem_region(port->mapbase, + SIRFUART_MAP_SIZE, SIRFUART_PORT_NAME); + return ret ? 0 : -EBUSY; +} + +static void sirfsoc_uart_release_port(struct uart_port *port) +{ + release_mem_region(port->mapbase, SIRFUART_MAP_SIZE); +} + +static void sirfsoc_uart_config_port(struct uart_port *port, int flags) +{ + if (flags & UART_CONFIG_TYPE) { + port->type = SIRFSOC_PORT_TYPE; + sirfsoc_uart_request_port(port); + } +} + +static struct uart_ops sirfsoc_uart_ops = { + .tx_empty = sirfsoc_uart_tx_empty, + .get_mctrl = sirfsoc_uart_get_mctrl, + .set_mctrl = sirfsoc_uart_set_mctrl, + .stop_tx = sirfsoc_uart_stop_tx, + .start_tx = sirfsoc_uart_start_tx, + .stop_rx = sirfsoc_uart_stop_rx, + .enable_ms = sirfsoc_uart_enable_ms, + .break_ctl = sirfsoc_uart_break_ctl, + .startup = sirfsoc_uart_startup, + .shutdown = sirfsoc_uart_shutdown, + .set_termios = sirfsoc_uart_set_termios, + .type = sirfsoc_uart_type, + .release_port = sirfsoc_uart_release_port, + .request_port = sirfsoc_uart_request_port, + .config_port = sirfsoc_uart_config_port, +}; + +#ifdef CONFIG_SERIAL_SIRFSOC_CONSOLE +static int __init sirfsoc_uart_console_setup(struct console *co, char *options) +{ + unsigned int baud = 115200; + unsigned int bits = 8; + unsigned int parity = 'n'; + unsigned int flow = 'n'; + struct uart_port *port = &sirfsoc_uart_ports[co->index].port; + + if (co->index < 0 || co->index >= SIRFSOC_UART_NR) + return -EINVAL; + + if (!port->mapbase) + return -ENODEV; + + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + port->cons = co; + return uart_set_options(port, co, baud, parity, bits, flow); +} + +static void sirfsoc_uart_console_putchar(struct uart_port *port, int ch) +{ + while (rd_regl(port, + SIRFUART_TX_FIFO_STATUS) & SIRFUART_FIFOFULL_MASK(port)) + cpu_relax(); + wr_regb(port, SIRFUART_TX_FIFO_DATA, ch); +} + +static void sirfsoc_uart_console_write(struct console *co, const char *s, + unsigned int count) +{ + struct uart_port *port = &sirfsoc_uart_ports[co->index].port; + uart_console_write(port, s, count, sirfsoc_uart_console_putchar); +} + +static struct console sirfsoc_uart_console = { + .name = SIRFSOC_UART_NAME, + .device = uart_console_device, + .flags = CON_PRINTBUFFER, + .index = -1, + .write = sirfsoc_uart_console_write, + .setup = sirfsoc_uart_console_setup, + .data = &sirfsoc_uart_drv, +}; + +static int __init sirfsoc_uart_console_init(void) +{ + register_console(&sirfsoc_uart_console); + return 0; +} +console_initcall(sirfsoc_uart_console_init); +#endif + +static struct uart_driver sirfsoc_uart_drv = { + .owner = THIS_MODULE, + .driver_name = SIRFUART_PORT_NAME, + .nr = SIRFSOC_UART_NR, + .dev_name = SIRFSOC_UART_NAME, + .major = SIRFSOC_UART_MAJOR, + .minor = SIRFSOC_UART_MINOR, +#ifdef CONFIG_SERIAL_SIRFSOC_CONSOLE + .cons = &sirfsoc_uart_console, +#else + .cons = NULL, +#endif +}; + +int sirfsoc_uart_probe(struct platform_device *pdev) +{ + struct sirfsoc_uart_port *sirfport; + struct uart_port *port; + struct resource *res; + int ret; + + if (of_property_read_u32(pdev->dev.of_node, "cell-index", &pdev->id)) { + dev_err(&pdev->dev, + "Unable to find cell-index in uart node.\n"); + ret = -EFAULT; + goto err; + } + + sirfport = &sirfsoc_uart_ports[pdev->id]; + port = &sirfport->port; + port->dev = &pdev->dev; + port->private_data = sirfport; + + if (of_find_property(pdev->dev.of_node, "hw_flow_ctrl", NULL)) + sirfport->hw_flow_ctrl = 1; + + if (of_property_read_u32(pdev->dev.of_node, + "fifosize", + &port->fifosize)) { + dev_err(&pdev->dev, + "Unable to find fifosize in uart node.\n"); + ret = -EFAULT; + goto err; + } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (res == NULL) { + dev_err(&pdev->dev, "Insufficient resources.\n"); + ret = -EFAULT; + goto err; + } + port->mapbase = res->start; + port->membase = devm_ioremap(&pdev->dev, res->start, resource_size(res)); + if (!port->membase) { + dev_err(&pdev->dev, "Cannot remap resource.\n"); + ret = -ENOMEM; + goto err; + } + res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); + if (res == NULL) { + dev_err(&pdev->dev, "Insufficient resources.\n"); + ret = -EFAULT; + goto irq_err; + } + port->irq = res->start; + + if (sirfport->hw_flow_ctrl) { + sirfport->pmx = pinmux_get(&pdev->dev, NULL); + ret = IS_ERR(sirfport->pmx); + if (ret) + goto pmx_err; + + pinmux_enable(sirfport->pmx); + } + + port->ops = &sirfsoc_uart_ops; + spin_lock_init(&port->lock); + + platform_set_drvdata(pdev, sirfport); + ret = uart_add_one_port(&sirfsoc_uart_drv, port); + if (ret != 0) { + dev_err(&pdev->dev, "Cannot add UART port(%d).\n", pdev->id); + goto port_err; + } + + return 0; + +port_err: + platform_set_drvdata(pdev, NULL); + if (sirfport->hw_flow_ctrl) { + pinmux_disable(sirfport->pmx); + pinmux_put(sirfport->pmx); + } +pmx_err: +irq_err: + devm_iounmap(&pdev->dev, port->membase); +err: + return ret; +} + +static int sirfsoc_uart_remove(struct platform_device *pdev) +{ + struct sirfsoc_uart_port *sirfport = platform_get_drvdata(pdev); + struct uart_port *port = &sirfport->port; + platform_set_drvdata(pdev, NULL); + if (sirfport->hw_flow_ctrl) { + pinmux_disable(sirfport->pmx); + pinmux_put(sirfport->pmx); + } + devm_iounmap(&pdev->dev, port->membase); + uart_remove_one_port(&sirfsoc_uart_drv, port); + return 0; +} + +static int +sirfsoc_uart_suspend(struct platform_device *pdev, pm_message_t state) +{ + struct sirfsoc_uart_port *sirfport = platform_get_drvdata(pdev); + struct uart_port *port = &sirfport->port; + uart_suspend_port(&sirfsoc_uart_drv, port); + return 0; +} + +static int sirfsoc_uart_resume(struct platform_device *pdev) +{ + struct sirfsoc_uart_port *sirfport = platform_get_drvdata(pdev); + struct uart_port *port = &sirfport->port; + uart_resume_port(&sirfsoc_uart_drv, port); + return 0; +} + +static struct of_device_id sirfsoc_uart_ids[] __devinitdata = { + { .compatible = "sirf,prima2-uart", }, + {} +}; +MODULE_DEVICE_TABLE(of, sirfsoc_serial_of_match); + +static struct platform_driver sirfsoc_uart_driver = { + .probe = sirfsoc_uart_probe, + .remove = __devexit_p(sirfsoc_uart_remove), + .suspend = sirfsoc_uart_suspend, + .resume = sirfsoc_uart_resume, + .driver = { + .name = SIRFUART_PORT_NAME, + .owner = THIS_MODULE, + .of_match_table = sirfsoc_uart_ids, + }, +}; + +static int __init sirfsoc_uart_init(void) +{ + int ret = 0; + + ret = uart_register_driver(&sirfsoc_uart_drv); + if (ret) + goto out; + + ret = platform_driver_register(&sirfsoc_uart_driver); + if (ret) + uart_unregister_driver(&sirfsoc_uart_drv); +out: + return ret; +} +module_init(sirfsoc_uart_init); + +static void __exit sirfsoc_uart_exit(void) +{ + platform_driver_unregister(&sirfsoc_uart_driver); + uart_unregister_driver(&sirfsoc_uart_drv); +} +module_exit(sirfsoc_uart_exit); + +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Bin Shi <Bin.Shi@csr.com>, Rong Wang<Rong.Wang@csr.com>"); +MODULE_DESCRIPTION("CSR SiRFprimaII Uart Driver"); diff --git a/drivers/tty/serial/sirfsoc_uart.h b/drivers/tty/serial/sirfsoc_uart.h new file mode 100644 index 000000000000..fc64260fa93c --- /dev/null +++ b/drivers/tty/serial/sirfsoc_uart.h @@ -0,0 +1,185 @@ +/* + * Drivers for CSR SiRFprimaII onboard UARTs. + * + * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company. + * + * Licensed under GPLv2 or later. + */ +#include <linux/bitops.h> + +/* UART Register Offset Define */ +#define SIRFUART_LINE_CTRL 0x0040 +#define SIRFUART_TX_RX_EN 0x004c +#define SIRFUART_DIVISOR 0x0050 +#define SIRFUART_INT_EN 0x0054 +#define SIRFUART_INT_STATUS 0x0058 +#define SIRFUART_TX_DMA_IO_CTRL 0x0100 +#define SIRFUART_TX_DMA_IO_LEN 0x0104 +#define SIRFUART_TX_FIFO_CTRL 0x0108 +#define SIRFUART_TX_FIFO_LEVEL_CHK 0x010C +#define SIRFUART_TX_FIFO_OP 0x0110 +#define SIRFUART_TX_FIFO_STATUS 0x0114 +#define SIRFUART_TX_FIFO_DATA 0x0118 +#define SIRFUART_RX_DMA_IO_CTRL 0x0120 +#define SIRFUART_RX_DMA_IO_LEN 0x0124 +#define SIRFUART_RX_FIFO_CTRL 0x0128 +#define SIRFUART_RX_FIFO_LEVEL_CHK 0x012C +#define SIRFUART_RX_FIFO_OP 0x0130 +#define SIRFUART_RX_FIFO_STATUS 0x0134 +#define SIRFUART_RX_FIFO_DATA 0x0138 +#define SIRFUART_AFC_CTRL 0x0140 +#define SIRFUART_SWH_DMA_IO 0x0148 + +/* UART Line Control Register */ +#define SIRFUART_DATA_BIT_LEN_MASK 0x3 +#define SIRFUART_DATA_BIT_LEN_5 BIT(0) +#define SIRFUART_DATA_BIT_LEN_6 1 +#define SIRFUART_DATA_BIT_LEN_7 2 +#define SIRFUART_DATA_BIT_LEN_8 3 +#define SIRFUART_STOP_BIT_LEN_1 0 +#define SIRFUART_STOP_BIT_LEN_2 BIT(2) +#define SIRFUART_PARITY_EN BIT(3) +#define SIRFUART_EVEN_BIT BIT(4) +#define SIRFUART_STICK_BIT_MASK (7 << 3) +#define SIRFUART_STICK_BIT_NONE (0 << 3) +#define SIRFUART_STICK_BIT_EVEN BIT(3) +#define SIRFUART_STICK_BIT_ODD (3 << 3) +#define SIRFUART_STICK_BIT_MARK (5 << 3) +#define SIRFUART_STICK_BIT_SPACE (7 << 3) +#define SIRFUART_SET_BREAK BIT(6) +#define SIRFUART_LOOP_BACK BIT(7) +#define SIRFUART_PARITY_MASK (7 << 3) +#define SIRFUART_DUMMY_READ BIT(16) + +#define SIRFSOC_UART_RX_TIMEOUT(br, to) (((br) * (((to) + 999) / 1000)) / 1000) +#define SIRFUART_RECV_TIMEOUT_MASK (0xFFFF << 16) +#define SIRFUART_RECV_TIMEOUT(x) (((x) & 0xFFFF) << 16) + +/* UART Auto Flow Control */ +#define SIRFUART_AFC_RX_THD_MASK 0x000000FF +#define SIRFUART_AFC_RX_EN BIT(8) +#define SIRFUART_AFC_TX_EN BIT(9) +#define SIRFUART_CTS_CTRL BIT(10) +#define SIRFUART_RTS_CTRL BIT(11) +#define SIRFUART_CTS_IN_STATUS BIT(12) +#define SIRFUART_RTS_OUT_STATUS BIT(13) + +/* UART Interrupt Enable Register */ +#define SIRFUART_RX_DONE_INT BIT(0) +#define SIRFUART_TX_DONE_INT BIT(1) +#define SIRFUART_RX_OFLOW_INT BIT(2) +#define SIRFUART_TX_ALLOUT_INT BIT(3) +#define SIRFUART_RX_IO_DMA_INT BIT(4) +#define SIRFUART_TX_IO_DMA_INT BIT(5) +#define SIRFUART_RXFIFO_FULL_INT BIT(6) +#define SIRFUART_TXFIFO_EMPTY_INT BIT(7) +#define SIRFUART_RXFIFO_THD_INT BIT(8) +#define SIRFUART_TXFIFO_THD_INT BIT(9) +#define SIRFUART_FRM_ERR_INT BIT(10) +#define SIRFUART_RXD_BREAK_INT BIT(11) +#define SIRFUART_RX_TIMEOUT_INT BIT(12) +#define SIRFUART_PARITY_ERR_INT BIT(13) +#define SIRFUART_CTS_INT_EN BIT(14) +#define SIRFUART_RTS_INT_EN BIT(15) + +/* UART Interrupt Status Register */ +#define SIRFUART_RX_DONE BIT(0) +#define SIRFUART_TX_DONE BIT(1) +#define SIRFUART_RX_OFLOW BIT(2) +#define SIRFUART_TX_ALL_EMPTY BIT(3) +#define SIRFUART_DMA_IO_RX_DONE BIT(4) +#define SIRFUART_DMA_IO_TX_DONE BIT(5) +#define SIRFUART_RXFIFO_FULL BIT(6) +#define SIRFUART_TXFIFO_EMPTY BIT(7) +#define SIRFUART_RXFIFO_THD_REACH BIT(8) +#define SIRFUART_TXFIFO_THD_REACH BIT(9) +#define SIRFUART_FRM_ERR BIT(10) +#define SIRFUART_RXD_BREAK BIT(11) +#define SIRFUART_RX_TIMEOUT BIT(12) +#define SIRFUART_PARITY_ERR BIT(13) +#define SIRFUART_CTS_CHANGE BIT(14) +#define SIRFUART_RTS_CHANGE BIT(15) +#define SIRFUART_PLUG_IN BIT(16) + +#define SIRFUART_ERR_INT_STAT \ + (SIRFUART_RX_OFLOW | \ + SIRFUART_FRM_ERR | \ + SIRFUART_RXD_BREAK | \ + SIRFUART_PARITY_ERR) +#define SIRFUART_ERR_INT_EN \ + (SIRFUART_RX_OFLOW_INT | \ + SIRFUART_FRM_ERR_INT | \ + SIRFUART_RXD_BREAK_INT | \ + SIRFUART_PARITY_ERR_INT) +#define SIRFUART_TX_INT_EN SIRFUART_TXFIFO_EMPTY_INT +#define SIRFUART_RX_IO_INT_EN \ + (SIRFUART_RX_TIMEOUT_INT | \ + SIRFUART_RXFIFO_THD_INT | \ + SIRFUART_RXFIFO_FULL_INT | \ + SIRFUART_ERR_INT_EN) + +/* UART FIFO Register */ +#define SIRFUART_TX_FIFO_STOP 0x0 +#define SIRFUART_TX_FIFO_RESET 0x1 +#define SIRFUART_TX_FIFO_START 0x2 +#define SIRFUART_RX_FIFO_STOP 0x0 +#define SIRFUART_RX_FIFO_RESET 0x1 +#define SIRFUART_RX_FIFO_START 0x2 +#define SIRFUART_TX_MODE_DMA 0 +#define SIRFUART_TX_MODE_IO 1 +#define SIRFUART_RX_MODE_DMA 0 +#define SIRFUART_RX_MODE_IO 1 + +#define SIRFUART_RX_EN 0x1 +#define SIRFUART_TX_EN 0x2 + +/* Generic Definitions */ +#define SIRFSOC_UART_NAME "ttySiRF" +#define SIRFSOC_UART_MAJOR 0 +#define SIRFSOC_UART_MINOR 0 +#define SIRFUART_PORT_NAME "sirfsoc-uart" +#define SIRFUART_MAP_SIZE 0x200 +#define SIRFSOC_UART_NR 3 +#define SIRFSOC_PORT_TYPE 0xa5 + +/* Baud Rate Calculation */ +#define SIRF_MIN_SAMPLE_DIV 0xf +#define SIRF_MAX_SAMPLE_DIV 0x3f +#define SIRF_IOCLK_DIV_MAX 0xffff +#define SIRF_SAMPLE_DIV_SHIFT 16 +#define SIRF_IOCLK_DIV_MASK 0xffff +#define SIRF_SAMPLE_DIV_MASK 0x3f0000 +#define SIRF_BAUD_RATE_SUPPORT_NR 18 + +/* For Fast Baud Rate Calculation */ +struct sirfsoc_baudrate_to_regv { + unsigned int baud_rate; + unsigned int reg_val; +}; + +struct sirfsoc_uart_port { + unsigned char hw_flow_ctrl; + unsigned char ms_enabled; + + struct uart_port port; + struct pinmux *pmx; +}; + +/* Hardware Flow Control */ +#define SIRFUART_AFC_CTRL_RX_THD 0x70 + +/* Register Access Control */ +#define portaddr(port, reg) ((port)->membase + (reg)) +#define rd_regb(port, reg) (__raw_readb(portaddr(port, reg))) +#define rd_regl(port, reg) (__raw_readl(portaddr(port, reg))) +#define wr_regb(port, reg, val) __raw_writeb(val, portaddr(port, reg)) +#define wr_regl(port, reg, val) __raw_writel(val, portaddr(port, reg)) + +/* UART Port Mask */ +#define SIRFUART_FIFOLEVEL_MASK(port) ((port->line == 1) ? (0x1f) : (0x7f)) +#define SIRFUART_FIFOFULL_MASK(port) ((port->line == 1) ? (0x20) : (0x80)) +#define SIRFUART_FIFOEMPTY_MASK(port) ((port->line == 1) ? (0x40) : (0x100)) + +/* I/O Mode */ +#define SIRFSOC_UART_IO_RX_MAX_CNT 256 +#define SIRFSOC_UART_IO_TX_REASONABLE_CNT 6 diff --git a/drivers/tty/serial/timbuart.c b/drivers/tty/serial/timbuart.c index e76c8b747fb8..70f97491d8f2 100644 --- a/drivers/tty/serial/timbuart.c +++ b/drivers/tty/serial/timbuart.c @@ -513,20 +513,7 @@ static struct platform_driver timbuart_platform_driver = { .remove = __devexit_p(timbuart_remove), }; -/*--------------------------------------------------------------------------*/ - -static int __init timbuart_init(void) -{ - return platform_driver_register(&timbuart_platform_driver); -} - -static void __exit timbuart_exit(void) -{ - platform_driver_unregister(&timbuart_platform_driver); -} - -module_init(timbuart_init); -module_exit(timbuart_exit); +module_platform_driver(timbuart_platform_driver); MODULE_DESCRIPTION("Timberdale UART driver"); MODULE_LICENSE("GPL v2"); diff --git a/drivers/tty/serial/vr41xx_siu.c b/drivers/tty/serial/vr41xx_siu.c index 3beb6ab4fa68..83148e79ca13 100644 --- a/drivers/tty/serial/vr41xx_siu.c +++ b/drivers/tty/serial/vr41xx_siu.c @@ -961,18 +961,7 @@ static struct platform_driver siu_device_driver = { }, }; -static int __init vr41xx_siu_init(void) -{ - return platform_driver_register(&siu_device_driver); -} - -static void __exit vr41xx_siu_exit(void) -{ - platform_driver_unregister(&siu_device_driver); -} - -module_init(vr41xx_siu_init); -module_exit(vr41xx_siu_exit); +module_platform_driver(siu_device_driver); MODULE_LICENSE("GPL"); MODULE_ALIAS("platform:SIU"); diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c index 3fdebd306b94..e41b9bbc107d 100644 --- a/drivers/tty/tty_io.c +++ b/drivers/tty/tty_io.c @@ -790,19 +790,24 @@ static void session_clear_tty(struct pid *session) void disassociate_ctty(int on_exit) { struct tty_struct *tty; - struct pid *tty_pgrp = NULL; if (!current->signal->leader) return; tty = get_current_tty(); if (tty) { - tty_pgrp = get_pid(tty->pgrp); + struct pid *tty_pgrp = get_pid(tty->pgrp); if (on_exit) { if (tty->driver->type != TTY_DRIVER_TYPE_PTY) tty_vhangup(tty); } tty_kref_put(tty); + if (tty_pgrp) { + kill_pgrp(tty_pgrp, SIGHUP, on_exit); + if (!on_exit) + kill_pgrp(tty_pgrp, SIGCONT, on_exit); + put_pid(tty_pgrp); + } } else if (on_exit) { struct pid *old_pgrp; spin_lock_irq(¤t->sighand->siglock); @@ -816,12 +821,6 @@ void disassociate_ctty(int on_exit) } return; } - if (tty_pgrp) { - kill_pgrp(tty_pgrp, SIGHUP, on_exit); - if (!on_exit) - kill_pgrp(tty_pgrp, SIGCONT, on_exit); - put_pid(tty_pgrp); - } spin_lock_irq(¤t->sighand->siglock); put_pid(current->signal->tty_old_pgrp); @@ -1558,6 +1557,59 @@ static void release_tty(struct tty_struct *tty, int idx) } /** + * tty_release_checks - check a tty before real release + * @tty: tty to check + * @o_tty: link of @tty (if any) + * @idx: index of the tty + * + * Performs some paranoid checking before true release of the @tty. + * This is a no-op unless TTY_PARANOIA_CHECK is defined. + */ +static int tty_release_checks(struct tty_struct *tty, struct tty_struct *o_tty, + int idx) +{ +#ifdef TTY_PARANOIA_CHECK + if (idx < 0 || idx >= tty->driver->num) { + printk(KERN_DEBUG "%s: bad idx when trying to free (%s)\n", + __func__, tty->name); + return -1; + } + + /* not much to check for devpts */ + if (tty->driver->flags & TTY_DRIVER_DEVPTS_MEM) + return 0; + + if (tty != tty->driver->ttys[idx]) { + printk(KERN_DEBUG "%s: driver.table[%d] not tty for (%s)\n", + __func__, idx, tty->name); + return -1; + } + if (tty->termios != tty->driver->termios[idx]) { + printk(KERN_DEBUG "%s: driver.termios[%d] not termios for (%s)\n", + __func__, idx, tty->name); + return -1; + } + if (tty->driver->other) { + if (o_tty != tty->driver->other->ttys[idx]) { + printk(KERN_DEBUG "%s: other->table[%d] not o_tty for (%s)\n", + __func__, idx, tty->name); + return -1; + } + if (o_tty->termios != tty->driver->other->termios[idx]) { + printk(KERN_DEBUG "%s: other->termios[%d] not o_termios for (%s)\n", + __func__, idx, tty->name); + return -1; + } + if (o_tty->link != tty) { + printk(KERN_DEBUG "%s: bad pty pointers\n", __func__); + return -1; + } + } +#endif + return 0; +} + +/** * tty_release - vfs callback for close * @inode: inode of tty * @filp: file pointer for handle to tty @@ -1585,11 +1637,11 @@ int tty_release(struct inode *inode, struct file *filp) int idx; char buf[64]; - if (tty_paranoia_check(tty, inode, "tty_release_dev")) + if (tty_paranoia_check(tty, inode, __func__)) return 0; tty_lock(); - check_tty_count(tty, "tty_release_dev"); + check_tty_count(tty, __func__); __tty_fasync(-1, filp, 0); @@ -1599,59 +1651,16 @@ int tty_release(struct inode *inode, struct file *filp) devpts = (tty->driver->flags & TTY_DRIVER_DEVPTS_MEM) != 0; o_tty = tty->link; -#ifdef TTY_PARANOIA_CHECK - if (idx < 0 || idx >= tty->driver->num) { - printk(KERN_DEBUG "tty_release_dev: bad idx when trying to " - "free (%s)\n", tty->name); + if (tty_release_checks(tty, o_tty, idx)) { tty_unlock(); return 0; } - if (!devpts) { - if (tty != tty->driver->ttys[idx]) { - tty_unlock(); - printk(KERN_DEBUG "tty_release_dev: driver.table[%d] not tty " - "for (%s)\n", idx, tty->name); - return 0; - } - if (tty->termios != tty->driver->termios[idx]) { - tty_unlock(); - printk(KERN_DEBUG "tty_release_dev: driver.termios[%d] not termios " - "for (%s)\n", - idx, tty->name); - return 0; - } - } -#endif #ifdef TTY_DEBUG_HANGUP - printk(KERN_DEBUG "tty_release_dev of %s (tty count=%d)...", - tty_name(tty, buf), tty->count); + printk(KERN_DEBUG "%s: %s (tty count=%d)...\n", __func__, + tty_name(tty, buf), tty->count); #endif -#ifdef TTY_PARANOIA_CHECK - if (tty->driver->other && - !(tty->driver->flags & TTY_DRIVER_DEVPTS_MEM)) { - if (o_tty != tty->driver->other->ttys[idx]) { - tty_unlock(); - printk(KERN_DEBUG "tty_release_dev: other->table[%d] " - "not o_tty for (%s)\n", - idx, tty->name); - return 0 ; - } - if (o_tty->termios != tty->driver->other->termios[idx]) { - tty_unlock(); - printk(KERN_DEBUG "tty_release_dev: other->termios[%d] " - "not o_termios for (%s)\n", - idx, tty->name); - return 0; - } - if (o_tty->link != tty) { - tty_unlock(); - printk(KERN_DEBUG "tty_release_dev: bad pty pointers\n"); - return 0; - } - } -#endif if (tty->ops->close) tty->ops->close(tty, filp); @@ -1707,8 +1716,8 @@ int tty_release(struct inode *inode, struct file *filp) if (!do_sleep) break; - printk(KERN_WARNING "tty_release_dev: %s: read/write wait queue " - "active!\n", tty_name(tty, buf)); + printk(KERN_WARNING "%s: %s: read/write wait queue active!\n", + __func__, tty_name(tty, buf)); tty_unlock(); mutex_unlock(&tty_mutex); schedule(); @@ -1721,15 +1730,14 @@ int tty_release(struct inode *inode, struct file *filp) */ if (pty_master) { if (--o_tty->count < 0) { - printk(KERN_WARNING "tty_release_dev: bad pty slave count " - "(%d) for %s\n", - o_tty->count, tty_name(o_tty, buf)); + printk(KERN_WARNING "%s: bad pty slave count (%d) for %s\n", + __func__, o_tty->count, tty_name(o_tty, buf)); o_tty->count = 0; } } if (--tty->count < 0) { - printk(KERN_WARNING "tty_release_dev: bad tty->count (%d) for %s\n", - tty->count, tty_name(tty, buf)); + printk(KERN_WARNING "%s: bad tty->count (%d) for %s\n", + __func__, tty->count, tty_name(tty, buf)); tty->count = 0; } @@ -1778,7 +1786,7 @@ int tty_release(struct inode *inode, struct file *filp) } #ifdef TTY_DEBUG_HANGUP - printk(KERN_DEBUG "freeing tty structure..."); + printk(KERN_DEBUG "%s: freeing tty structure...\n", __func__); #endif /* * Ask the line discipline code to release its structures @@ -1798,6 +1806,83 @@ int tty_release(struct inode *inode, struct file *filp) } /** + * tty_open_current_tty - get tty of current task for open + * @device: device number + * @filp: file pointer to tty + * @return: tty of the current task iff @device is /dev/tty + * + * We cannot return driver and index like for the other nodes because + * devpts will not work then. It expects inodes to be from devpts FS. + */ +static struct tty_struct *tty_open_current_tty(dev_t device, struct file *filp) +{ + struct tty_struct *tty; + + if (device != MKDEV(TTYAUX_MAJOR, 0)) + return NULL; + + tty = get_current_tty(); + if (!tty) + return ERR_PTR(-ENXIO); + + filp->f_flags |= O_NONBLOCK; /* Don't let /dev/tty block */ + /* noctty = 1; */ + tty_kref_put(tty); + /* FIXME: we put a reference and return a TTY! */ + return tty; +} + +/** + * tty_lookup_driver - lookup a tty driver for a given device file + * @device: device number + * @filp: file pointer to tty + * @noctty: set if the device should not become a controlling tty + * @index: index for the device in the @return driver + * @return: driver for this inode (with increased refcount) + * + * If @return is not erroneous, the caller is responsible to decrement the + * refcount by tty_driver_kref_put. + * + * Locking: tty_mutex protects get_tty_driver + */ +static struct tty_driver *tty_lookup_driver(dev_t device, struct file *filp, + int *noctty, int *index) +{ + struct tty_driver *driver; + + switch (device) { +#ifdef CONFIG_VT + case MKDEV(TTY_MAJOR, 0): { + extern struct tty_driver *console_driver; + driver = tty_driver_kref_get(console_driver); + *index = fg_console; + *noctty = 1; + break; + } +#endif + case MKDEV(TTYAUX_MAJOR, 1): { + struct tty_driver *console_driver = console_device(index); + if (console_driver) { + driver = tty_driver_kref_get(console_driver); + if (driver) { + /* Don't let /dev/console block */ + filp->f_flags |= O_NONBLOCK; + *noctty = 1; + break; + } + } + return ERR_PTR(-ENODEV); + } + default: + driver = get_tty_driver(device, index); + if (!driver) + return ERR_PTR(-ENODEV); + break; + } + return driver; +} + +/** * tty_open - open a tty device * @inode: inode of device file * @filp: file pointer to tty @@ -1813,16 +1898,16 @@ int tty_release(struct inode *inode, struct file *filp) * The termios state of a pty is reset on first open so that * settings don't persist across reuse. * - * Locking: tty_mutex protects tty, get_tty_driver and tty_init_dev work. + * Locking: tty_mutex protects tty, tty_lookup_driver and tty_init_dev. * tty->count should protect the rest. * ->siglock protects ->signal/->sighand */ static int tty_open(struct inode *inode, struct file *filp) { - struct tty_struct *tty = NULL; + struct tty_struct *tty; int noctty, retval; - struct tty_driver *driver; + struct tty_driver *driver = NULL; int index; dev_t device = inode->i_rdev; unsigned saved_flags = filp->f_flags; @@ -1841,66 +1926,22 @@ retry_open: mutex_lock(&tty_mutex); tty_lock(); - if (device == MKDEV(TTYAUX_MAJOR, 0)) { - tty = get_current_tty(); - if (!tty) { - tty_unlock(); - mutex_unlock(&tty_mutex); - tty_free_file(filp); - return -ENXIO; - } - driver = tty_driver_kref_get(tty->driver); - index = tty->index; - filp->f_flags |= O_NONBLOCK; /* Don't let /dev/tty block */ - /* noctty = 1; */ - /* FIXME: Should we take a driver reference ? */ - tty_kref_put(tty); - goto got_driver; - } -#ifdef CONFIG_VT - if (device == MKDEV(TTY_MAJOR, 0)) { - extern struct tty_driver *console_driver; - driver = tty_driver_kref_get(console_driver); - index = fg_console; - noctty = 1; - goto got_driver; - } -#endif - if (device == MKDEV(TTYAUX_MAJOR, 1)) { - struct tty_driver *console_driver = console_device(&index); - if (console_driver) { - driver = tty_driver_kref_get(console_driver); - if (driver) { - /* Don't let /dev/console block */ - filp->f_flags |= O_NONBLOCK; - noctty = 1; - goto got_driver; - } + tty = tty_open_current_tty(device, filp); + if (IS_ERR(tty)) { + retval = PTR_ERR(tty); + goto err_unlock; + } else if (!tty) { + driver = tty_lookup_driver(device, filp, &noctty, &index); + if (IS_ERR(driver)) { + retval = PTR_ERR(driver); + goto err_unlock; } - tty_unlock(); - mutex_unlock(&tty_mutex); - tty_free_file(filp); - return -ENODEV; - } - driver = get_tty_driver(device, &index); - if (!driver) { - tty_unlock(); - mutex_unlock(&tty_mutex); - tty_free_file(filp); - return -ENODEV; - } -got_driver: - if (!tty) { /* check whether we're reopening an existing tty */ tty = tty_driver_lookup_tty(driver, inode, index); - if (IS_ERR(tty)) { - tty_unlock(); - mutex_unlock(&tty_mutex); - tty_driver_kref_put(driver); - tty_free_file(filp); - return PTR_ERR(tty); + retval = PTR_ERR(tty); + goto err_unlock; } } @@ -1912,21 +1953,22 @@ got_driver: tty = tty_init_dev(driver, index, 0); mutex_unlock(&tty_mutex); - tty_driver_kref_put(driver); + if (driver) + tty_driver_kref_put(driver); if (IS_ERR(tty)) { tty_unlock(); - tty_free_file(filp); - return PTR_ERR(tty); + retval = PTR_ERR(tty); + goto err_file; } tty_add_file(tty, filp); - check_tty_count(tty, "tty_open"); + check_tty_count(tty, __func__); if (tty->driver->type == TTY_DRIVER_TYPE_PTY && tty->driver->subtype == PTY_TYPE_MASTER) noctty = 1; #ifdef TTY_DEBUG_HANGUP - printk(KERN_DEBUG "opening %s...", tty->name); + printk(KERN_DEBUG "%s: opening %s...\n", __func__, tty->name); #endif if (tty->ops->open) retval = tty->ops->open(tty, filp); @@ -1940,8 +1982,8 @@ got_driver: if (retval) { #ifdef TTY_DEBUG_HANGUP - printk(KERN_DEBUG "error %d in opening %s...", retval, - tty->name); + printk(KERN_DEBUG "%s: error %d in opening %s...\n", __func__, + retval, tty->name); #endif tty_unlock(); /* need to call tty_release without BTM */ tty_release(inode, filp); @@ -1976,6 +2018,15 @@ got_driver: tty_unlock(); mutex_unlock(&tty_mutex); return 0; +err_unlock: + tty_unlock(); + mutex_unlock(&tty_mutex); + /* after locks to avoid deadlock */ + if (!IS_ERR_OR_NULL(driver)) + tty_driver_kref_put(driver); +err_file: + tty_free_file(filp); + return retval; } diff --git a/drivers/tty/tty_ldisc.c b/drivers/tty/tty_ldisc.c index 8e0924f55446..24b95db75d84 100644 --- a/drivers/tty/tty_ldisc.c +++ b/drivers/tty/tty_ldisc.c @@ -1,19 +1,11 @@ #include <linux/types.h> -#include <linux/major.h> #include <linux/errno.h> -#include <linux/signal.h> -#include <linux/fcntl.h> +#include <linux/kmod.h> #include <linux/sched.h> #include <linux/interrupt.h> #include <linux/tty.h> #include <linux/tty_driver.h> -#include <linux/tty_flip.h> -#include <linux/devpts_fs.h> #include <linux/file.h> -#include <linux/console.h> -#include <linux/timer.h> -#include <linux/ctype.h> -#include <linux/kd.h> #include <linux/mm.h> #include <linux/string.h> #include <linux/slab.h> @@ -24,18 +16,8 @@ #include <linux/device.h> #include <linux/wait.h> #include <linux/bitops.h> -#include <linux/delay.h> #include <linux/seq_file.h> - #include <linux/uaccess.h> -#include <asm/system.h> - -#include <linux/kbd_kern.h> -#include <linux/vt_kern.h> -#include <linux/selection.h> - -#include <linux/kmod.h> -#include <linux/nsproxy.h> #include <linux/ratelimit.h> /* @@ -558,8 +540,6 @@ static int tty_ldisc_wait_idle(struct tty_struct *tty, long timeout) long ret; ret = wait_event_timeout(tty_ldisc_idle, atomic_read(&tty->ldisc->users) == 1, timeout); - if (ret < 0) - return ret; return ret > 0 ? 0 : -EBUSY; } diff --git a/drivers/tty/vt/consolemap.c b/drivers/tty/vt/consolemap.c index 45d3e80156d4..a0f3d6c4d39d 100644 --- a/drivers/tty/vt/consolemap.c +++ b/drivers/tty/vt/consolemap.c @@ -584,7 +584,7 @@ int con_set_default_unimap(struct vc_data *vc) return 0; dflt->refcount++; *vc->vc_uni_pagedir_loc = (unsigned long)dflt; - if (p && --p->refcount) { + if (p && !--p->refcount) { con_release_unimap(p); kfree(p); } |