diff options
Diffstat (limited to 'drivers/tty')
47 files changed, 2195 insertions, 504 deletions
diff --git a/drivers/tty/hvc/hvc_xen.c b/drivers/tty/hvc/hvc_xen.c index c3d8af917ffc..f1e57425e39f 100644 --- a/drivers/tty/hvc/hvc_xen.c +++ b/drivers/tty/hvc/hvc_xen.c @@ -400,9 +400,6 @@ static int xencons_connect_backend(struct xenbus_device *dev, evtchn); if (ret) goto error_xenbus; - ret = xenbus_printf(xbt, dev->nodename, "type", "ioemu"); - if (ret) - goto error_xenbus; ret = xenbus_transaction_end(xbt, 0); if (ret) { if (ret == -EAGAIN) diff --git a/drivers/tty/metag_da.c b/drivers/tty/metag_da.c index 7332e2ca4615..3774600741d8 100644 --- a/drivers/tty/metag_da.c +++ b/drivers/tty/metag_da.c @@ -17,6 +17,7 @@ #include <linux/init.h> #include <linux/kernel.h> #include <linux/kthread.h> +#include <linux/moduleparam.h> #include <linux/mutex.h> #include <linux/sched.h> #include <linux/serial.h> @@ -70,6 +71,15 @@ static struct tty_driver *channel_driver; static struct timer_list put_timer; static struct task_struct *dashtty_thread; +/* + * The console_poll parameter determines whether the console channel should be + * polled for input. + * By default the console channel isn't polled at all, in order to avoid the + * overhead, but that means it isn't possible to have a login on /dev/console. + */ +static bool console_poll; +module_param(console_poll, bool, S_IRUGO); + #define RX_BUF_SIZE 1024 enum { @@ -353,7 +363,7 @@ static int dashtty_port_activate(struct tty_port *port, struct tty_struct *tty) * possible to have a login on /dev/console. * */ - if (dport != &dashtty_ports[CONSOLE_CHANNEL]) + if (console_poll || dport != &dashtty_ports[CONSOLE_CHANNEL]) if (atomic_inc_return(&num_channels_need_poll) == 1) add_poll_timer(&poll_timer); @@ -372,7 +382,7 @@ static void dashtty_port_shutdown(struct tty_port *port) unsigned int count; /* stop reading */ - if (dport != &dashtty_ports[CONSOLE_CHANNEL]) + if (console_poll || dport != &dashtty_ports[CONSOLE_CHANNEL]) if (atomic_dec_and_test(&num_channels_need_poll)) del_timer_sync(&poll_timer); diff --git a/drivers/tty/moxa.c b/drivers/tty/moxa.c index 1deaca4674e4..14c54e041065 100644 --- a/drivers/tty/moxa.c +++ b/drivers/tty/moxa.c @@ -1096,7 +1096,7 @@ static int __init moxa_init(void) continue; } - printk(KERN_INFO "MOXA isa board found at 0x%.8lu and " + printk(KERN_INFO "MOXA isa board found at 0x%.8lx and " "ready (%u ports, firmware loaded)\n", baseaddr[i], brd->numPorts); diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c index f44f1ba762c3..89c4cee253e3 100644 --- a/drivers/tty/n_tty.c +++ b/drivers/tty/n_tty.c @@ -1166,7 +1166,7 @@ static void n_tty_receive_break(struct tty_struct *tty) } put_tty_queue('\0', ldata); if (waitqueue_active(&tty->read_wait)) - wake_up_interruptible(&tty->read_wait); + wake_up_interruptible_poll(&tty->read_wait, POLLIN); } /** @@ -1226,7 +1226,7 @@ static void n_tty_receive_parity_error(struct tty_struct *tty, unsigned char c) } else put_tty_queue(c, ldata); if (waitqueue_active(&tty->read_wait)) - wake_up_interruptible(&tty->read_wait); + wake_up_interruptible_poll(&tty->read_wait, POLLIN); } static void @@ -1378,7 +1378,7 @@ handle_newline: ldata->canon_head = ldata->read_head; kill_fasync(&tty->fasync, SIGIO, POLL_IN); if (waitqueue_active(&tty->read_wait)) - wake_up_interruptible(&tty->read_wait); + wake_up_interruptible_poll(&tty->read_wait, POLLIN); return 0; } } @@ -1679,7 +1679,7 @@ static void __receive_buf(struct tty_struct *tty, const unsigned char *cp, L_EXTPROC(tty)) { kill_fasync(&tty->fasync, SIGIO, POLL_IN); if (waitqueue_active(&tty->read_wait)) - wake_up_interruptible(&tty->read_wait); + wake_up_interruptible_poll(&tty->read_wait, POLLIN); } } diff --git a/drivers/tty/nozomi.c b/drivers/tty/nozomi.c index cd0429369557..74885af8c7bd 100644 --- a/drivers/tty/nozomi.c +++ b/drivers/tty/nozomi.c @@ -523,7 +523,7 @@ static u32 write_mem32(void __iomem *mem_addr_start, const u32 *buf, } /* Setup pointers to different channels and also setup buffer sizes. */ -static void setup_memory(struct nozomi *dc) +static void nozomi_setup_memory(struct nozomi *dc) { void __iomem *offset = dc->base_addr + dc->config_table.dl_start; /* The length reported is including the length field of 4 bytes, @@ -671,7 +671,7 @@ static int nozomi_read_config_table(struct nozomi *dc) int i; DBG1("Second phase, configuring card"); - setup_memory(dc); + nozomi_setup_memory(dc); dc->port[PORT_MDM].toggle_ul = dc->config_table.toggle.mdm_ul; dc->port[PORT_MDM].toggle_dl = dc->config_table.toggle.mdm_dl; @@ -705,7 +705,7 @@ static int nozomi_read_config_table(struct nozomi *dc) dc->config_table.version); /* Here we should disable all I/O over F32. */ - setup_memory(dc); + nozomi_setup_memory(dc); /* * We should send ALL channel pair tokens back along diff --git a/drivers/tty/pty.c b/drivers/tty/pty.c index 9bbdb1de12e2..7c4447a5c0f4 100644 --- a/drivers/tty/pty.c +++ b/drivers/tty/pty.c @@ -24,6 +24,7 @@ #include <linux/devpts_fs.h> #include <linux/slab.h> #include <linux/mutex.h> +#include <linux/poll.h> #ifdef CONFIG_UNIX98_PTYS @@ -313,6 +314,42 @@ done: } /** + * pty_start - start() handler + * pty_stop - stop() handler + * @tty: tty being flow-controlled + * + * Propagates the TIOCPKT status to the master pty. + * + * NB: only the master pty can be in packet mode so only the slave + * needs start()/stop() handlers + */ +static void pty_start(struct tty_struct *tty) +{ + unsigned long flags; + + spin_lock_irqsave(&tty->ctrl_lock, flags); + if (tty->link && tty->link->packet) { + tty->ctrl_status &= ~TIOCPKT_STOP; + tty->ctrl_status |= TIOCPKT_START; + wake_up_interruptible_poll(&tty->link->read_wait, POLLIN); + } + spin_unlock_irqrestore(&tty->ctrl_lock, flags); +} + +static void pty_stop(struct tty_struct *tty) +{ + unsigned long flags; + + spin_lock_irqsave(&tty->ctrl_lock, flags); + if (tty->link && tty->link->packet) { + tty->ctrl_status &= ~TIOCPKT_START; + tty->ctrl_status |= TIOCPKT_STOP; + wake_up_interruptible_poll(&tty->link->read_wait, POLLIN); + } + spin_unlock_irqrestore(&tty->ctrl_lock, flags); +} + +/** * pty_common_install - set up the pty pair * @driver: the pty driver * @tty: the tty being instantiated @@ -471,6 +508,8 @@ static const struct tty_operations slave_pty_ops_bsd = { .set_termios = pty_set_termios, .cleanup = pty_cleanup, .resize = pty_resize, + .start = pty_start, + .stop = pty_stop, .remove = pty_remove }; @@ -646,6 +685,8 @@ static const struct tty_operations pty_unix98_ops = { .chars_in_buffer = pty_chars_in_buffer, .unthrottle = pty_unthrottle, .set_termios = pty_set_termios, + .start = pty_start, + .stop = pty_stop, .shutdown = pty_unix98_shutdown, .cleanup = pty_cleanup, }; diff --git a/drivers/tty/serial/8250/8250.h b/drivers/tty/serial/8250/8250.h index 1b08c918cd51..1bcb4b2141a6 100644 --- a/drivers/tty/serial/8250/8250.h +++ b/drivers/tty/serial/8250/8250.h @@ -72,6 +72,7 @@ struct serial8250_config { #define UART_CAP_UUE (1 << 12) /* UART needs IER bit 6 set (Xscale) */ #define UART_CAP_RTOIE (1 << 13) /* UART needs IER bit 4 set (Xscale, Tegra) */ #define UART_CAP_HFIFO (1 << 14) /* UART has a "hidden" FIFO */ +#define UART_CAP_RPM (1 << 15) /* Runtime PM is active while idle */ #define UART_BUG_QUOT (1 << 0) /* UART has buggy quot LSB */ #define UART_BUG_TXEN (1 << 1) /* UART has buggy TX IIR status */ @@ -112,6 +113,8 @@ static inline void serial_dl_write(struct uart_8250_port *up, int value) up->dl_write(up, value); } +struct uart_8250_port *serial8250_get_port(int line); + #if defined(__alpha__) && !defined(CONFIG_PCI) /* * Digital did something really horribly wrong with the OUT1 and OUT2 diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c index 1d42dba6121d..ca5cfdc1459a 100644 --- a/drivers/tty/serial/8250/8250_core.c +++ b/drivers/tty/serial/8250/8250_core.c @@ -37,6 +37,8 @@ #include <linux/nmi.h> #include <linux/mutex.h> #include <linux/slab.h> +#include <linux/uaccess.h> +#include <linux/pm_runtime.h> #ifdef CONFIG_SPARC #include <linux/sunserialcore.h> #endif @@ -539,6 +541,53 @@ void serial8250_clear_and_reinit_fifos(struct uart_8250_port *p) } EXPORT_SYMBOL_GPL(serial8250_clear_and_reinit_fifos); +static void serial8250_rpm_get(struct uart_8250_port *p) +{ + if (!(p->capabilities & UART_CAP_RPM)) + return; + pm_runtime_get_sync(p->port.dev); +} + +static void serial8250_rpm_put(struct uart_8250_port *p) +{ + if (!(p->capabilities & UART_CAP_RPM)) + return; + pm_runtime_mark_last_busy(p->port.dev); + pm_runtime_put_autosuspend(p->port.dev); +} + +/* + * This two wrapper ensure, that enable_runtime_pm_tx() can be called more than + * once and disable_runtime_pm_tx() will still disable RPM because the fifo is + * empty and the HW can idle again. + */ +static void serial8250_rpm_get_tx(struct uart_8250_port *p) +{ + unsigned char rpm_active; + + if (!(p->capabilities & UART_CAP_RPM)) + return; + + rpm_active = xchg(&p->rpm_tx_active, 1); + if (rpm_active) + return; + pm_runtime_get_sync(p->port.dev); +} + +static void serial8250_rpm_put_tx(struct uart_8250_port *p) +{ + unsigned char rpm_active; + + if (!(p->capabilities & UART_CAP_RPM)) + return; + + rpm_active = xchg(&p->rpm_tx_active, 0); + if (!rpm_active) + return; + pm_runtime_mark_last_busy(p->port.dev); + pm_runtime_put_autosuspend(p->port.dev); +} + /* * IER sleep support. UARTs which have EFRs need the "extended * capability" bit enabled. Note that on XR16C850s, we need to @@ -553,10 +602,11 @@ static void serial8250_set_sleep(struct uart_8250_port *p, int sleep) * offset but the UART channel may only write to the corresponding * bit. */ + serial8250_rpm_get(p); if ((p->port.type == PORT_XR17V35X) || (p->port.type == PORT_XR17D15X)) { serial_out(p, UART_EXAR_SLEEP, sleep ? 0xff : 0); - return; + goto out; } if (p->capabilities & UART_CAP_SLEEP) { @@ -572,6 +622,8 @@ static void serial8250_set_sleep(struct uart_8250_port *p, int sleep) serial_out(p, UART_LCR, 0); } } +out: + serial8250_rpm_put(p); } #ifdef CONFIG_SERIAL_8250_RSA @@ -1272,6 +1324,7 @@ static inline void __stop_tx(struct uart_8250_port *p) if (p->ier & UART_IER_THRI) { p->ier &= ~UART_IER_THRI; serial_out(p, UART_IER, p->ier); + serial8250_rpm_put_tx(p); } } @@ -1279,6 +1332,7 @@ static void serial8250_stop_tx(struct uart_port *port) { struct uart_8250_port *up = up_to_u8250p(port); + serial8250_rpm_get(up); __stop_tx(up); /* @@ -1288,12 +1342,14 @@ static void serial8250_stop_tx(struct uart_port *port) up->acr |= UART_ACR_TXDIS; serial_icr_write(up, UART_ACR, up->acr); } + serial8250_rpm_put(up); } static void serial8250_start_tx(struct uart_port *port) { struct uart_8250_port *up = up_to_u8250p(port); + serial8250_rpm_get_tx(up); if (up->dma && !serial8250_tx_dma(up)) { return; } else if (!(up->ier & UART_IER_THRI)) { @@ -1318,13 +1374,27 @@ static void serial8250_start_tx(struct uart_port *port) } } +static void serial8250_throttle(struct uart_port *port) +{ + port->throttle(port); +} + +static void serial8250_unthrottle(struct uart_port *port) +{ + port->unthrottle(port); +} + static void serial8250_stop_rx(struct uart_port *port) { struct uart_8250_port *up = up_to_u8250p(port); - up->ier &= ~UART_IER_RLSI; + serial8250_rpm_get(up); + + up->ier &= ~(UART_IER_RLSI | UART_IER_RDI); up->port.read_status_mask &= ~UART_LSR_DR; serial_port_out(port, UART_IER, up->ier); + + serial8250_rpm_put(up); } static void serial8250_enable_ms(struct uart_port *port) @@ -1336,7 +1406,10 @@ static void serial8250_enable_ms(struct uart_port *port) return; up->ier |= UART_IER_MSI; + + serial8250_rpm_get(up); serial_port_out(port, UART_IER, up->ier); + serial8250_rpm_put(up); } /* @@ -1458,11 +1531,17 @@ void serial8250_tx_chars(struct uart_8250_port *up) DEBUG_INTR("THRE..."); - if (uart_circ_empty(xmit)) + /* + * With RPM enabled, we have to wait once the FIFO is empty before the + * HW can go idle. So we get here once again with empty FIFO and disable + * the interrupt and RPM in __stop_tx() + */ + if (uart_circ_empty(xmit) && !(up->capabilities & UART_CAP_RPM)) __stop_tx(up); } EXPORT_SYMBOL_GPL(serial8250_tx_chars); +/* Caller holds uart port lock */ unsigned int serial8250_modem_status(struct uart_8250_port *up) { struct uart_port *port = &up->port; @@ -1525,9 +1604,17 @@ EXPORT_SYMBOL_GPL(serial8250_handle_irq); static int serial8250_default_handle_irq(struct uart_port *port) { - unsigned int iir = serial_port_in(port, UART_IIR); + struct uart_8250_port *up = up_to_u8250p(port); + unsigned int iir; + int ret; + + serial8250_rpm_get(up); - return serial8250_handle_irq(port, iir); + iir = serial_port_in(port, UART_IIR); + ret = serial8250_handle_irq(port, iir); + + serial8250_rpm_put(up); + return ret; } /* @@ -1784,11 +1871,15 @@ static unsigned int serial8250_tx_empty(struct uart_port *port) unsigned long flags; unsigned int lsr; + serial8250_rpm_get(up); + spin_lock_irqsave(&port->lock, flags); lsr = serial_port_in(port, UART_LSR); up->lsr_saved_flags |= lsr & LSR_SAVE_FLAGS; spin_unlock_irqrestore(&port->lock, flags); + serial8250_rpm_put(up); + return (lsr & BOTH_EMPTY) == BOTH_EMPTY ? TIOCSER_TEMT : 0; } @@ -1798,7 +1889,9 @@ static unsigned int serial8250_get_mctrl(struct uart_port *port) unsigned int status; unsigned int ret; + serial8250_rpm_get(up); status = serial8250_modem_status(up); + serial8250_rpm_put(up); ret = 0; if (status & UART_MSR_DCD) @@ -1838,6 +1931,7 @@ static void serial8250_break_ctl(struct uart_port *port, int break_state) struct uart_8250_port *up = up_to_u8250p(port); unsigned long flags; + serial8250_rpm_get(up); spin_lock_irqsave(&port->lock, flags); if (break_state == -1) up->lcr |= UART_LCR_SBC; @@ -1845,6 +1939,7 @@ static void serial8250_break_ctl(struct uart_port *port, int break_state) up->lcr &= ~UART_LCR_SBC; serial_port_out(port, UART_LCR, up->lcr); spin_unlock_irqrestore(&port->lock, flags); + serial8250_rpm_put(up); } /* @@ -1889,12 +1984,23 @@ static void wait_for_xmitr(struct uart_8250_port *up, int bits) static int serial8250_get_poll_char(struct uart_port *port) { - unsigned char lsr = serial_port_in(port, UART_LSR); + struct uart_8250_port *up = up_to_u8250p(port); + unsigned char lsr; + int status; + + serial8250_rpm_get(up); + + lsr = serial_port_in(port, UART_LSR); - if (!(lsr & UART_LSR_DR)) - return NO_POLL_CHAR; + if (!(lsr & UART_LSR_DR)) { + status = NO_POLL_CHAR; + goto out; + } - return serial_port_in(port, UART_RX); + status = serial_port_in(port, UART_RX); +out: + serial8250_rpm_put(up); + return status; } @@ -1904,6 +2010,7 @@ static void serial8250_put_poll_char(struct uart_port *port, unsigned int ier; struct uart_8250_port *up = up_to_u8250p(port); + serial8250_rpm_get(up); /* * First save the IER then disable the interrupts */ @@ -1925,11 +2032,12 @@ static void serial8250_put_poll_char(struct uart_port *port, */ wait_for_xmitr(up, BOTH_EMPTY); serial_port_out(port, UART_IER, ier); + serial8250_rpm_put(up); } #endif /* CONFIG_CONSOLE_POLL */ -static int serial8250_startup(struct uart_port *port) +int serial8250_do_startup(struct uart_port *port) { struct uart_8250_port *up = up_to_u8250p(port); unsigned long flags; @@ -1950,6 +2058,7 @@ static int serial8250_startup(struct uart_port *port) if (port->iotype != up->cur_iotype) set_io_from_upio(port); + serial8250_rpm_get(up); if (port->type == PORT_16C950) { /* Wake up and initialize UART */ up->acr = 0; @@ -1970,7 +2079,6 @@ static int serial8250_startup(struct uart_port *port) */ enable_rsa(up); #endif - /* * Clear the FIFO buffers and disable them. * (they will be reenabled in set_termios()) @@ -1980,8 +2088,8 @@ static int serial8250_startup(struct uart_port *port) /* * Clear the interrupt registers. */ - serial_port_in(port, UART_LSR); - serial_port_in(port, UART_RX); + if (serial_port_in(port, UART_LSR) & UART_LSR_DR) + serial_port_in(port, UART_RX); serial_port_in(port, UART_IIR); serial_port_in(port, UART_MSR); @@ -1994,7 +2102,8 @@ static int serial8250_startup(struct uart_port *port) (serial_port_in(port, UART_LSR) == 0xff)) { printk_ratelimited(KERN_INFO "ttyS%d: LSR safety check engaged!\n", serial_index(port)); - return -ENODEV; + retval = -ENODEV; + goto out; } /* @@ -2079,7 +2188,7 @@ static int serial8250_startup(struct uart_port *port) } else { retval = serial_link_irq_chain(up); if (retval) - return retval; + goto out; } /* @@ -2141,8 +2250,8 @@ dont_test_tx_en: * saved flags to avoid getting false values from polling * routines or the previous session. */ - serial_port_in(port, UART_LSR); - serial_port_in(port, UART_RX); + if (serial_port_in(port, UART_LSR) & UART_LSR_DR) + serial_port_in(port, UART_RX); serial_port_in(port, UART_IIR); serial_port_in(port, UART_MSR); up->lsr_saved_flags = 0; @@ -2177,15 +2286,26 @@ dont_test_tx_en: outb_p(0x80, icp); inb_p(icp); } + retval = 0; +out: + serial8250_rpm_put(up); + return retval; +} +EXPORT_SYMBOL_GPL(serial8250_do_startup); - return 0; +static int serial8250_startup(struct uart_port *port) +{ + if (port->startup) + return port->startup(port); + return serial8250_do_startup(port); } -static void serial8250_shutdown(struct uart_port *port) +void serial8250_do_shutdown(struct uart_port *port) { struct uart_8250_port *up = up_to_u8250p(port); unsigned long flags; + serial8250_rpm_get(up); /* * Disable interrupts from this port */ @@ -2224,13 +2344,24 @@ static void serial8250_shutdown(struct uart_port *port) * Read data port to reset things, and then unlink from * the IRQ chain. */ - serial_port_in(port, UART_RX); + if (serial_port_in(port, UART_LSR) & UART_LSR_DR) + serial_port_in(port, UART_RX); + serial8250_rpm_put(up); del_timer_sync(&up->timer); up->timer.function = serial8250_timeout; if (port->irq) serial_unlink_irq_chain(up); } +EXPORT_SYMBOL_GPL(serial8250_do_shutdown); + +static void serial8250_shutdown(struct uart_port *port) +{ + if (port->shutdown) + port->shutdown(port); + else + serial8250_do_shutdown(port); +} static unsigned int serial8250_get_divisor(struct uart_port *port, unsigned int baud) { @@ -2319,11 +2450,9 @@ serial8250_do_set_termios(struct uart_port *port, struct ktermios *termios, * the trigger, or the MCR RTS bit is cleared. In the case where * the remote UART is not using CTS auto flow control, we must * have sufficient FIFO entries for the latency of the remote - * UART to respond. IOW, at least 32 bytes of FIFO. Also enable - * AFE if hw flow control is supported + * UART to respond. IOW, at least 32 bytes of FIFO. */ - if ((up->capabilities & UART_CAP_AFE && (port->fifosize >= 32)) || - (port->flags & UPF_HARD_FLOW)) { + if (up->capabilities & UART_CAP_AFE && port->fifosize >= 32) { up->mcr &= ~UART_MCR_AFE; if (termios->c_cflag & CRTSCTS) up->mcr |= UART_MCR_AFE; @@ -2333,6 +2462,7 @@ serial8250_do_set_termios(struct uart_port *port, struct ktermios *termios, * Ok, we're now changing the port state. Do it with * interrupts disabled. */ + serial8250_rpm_get(up); spin_lock_irqsave(&port->lock, flags); /* @@ -2454,6 +2584,8 @@ serial8250_do_set_termios(struct uart_port *port, struct ktermios *termios, } serial8250_set_mctrl(port, port->mctrl); spin_unlock_irqrestore(&port->lock, flags); + serial8250_rpm_put(up); + /* Don't rewrite B0 */ if (tty_termios_baud_rate(termios)) tty_termios_encode_baud_rate(termios, baud, baud); @@ -2843,6 +2975,42 @@ serial8250_verify_port(struct uart_port *port, struct serial_struct *ser) return 0; } +static int serial8250_ioctl(struct uart_port *port, unsigned int cmd, + unsigned long arg) +{ + struct uart_8250_port *up = + container_of(port, struct uart_8250_port, port); + int ret; + struct serial_rs485 rs485_config; + + if (!up->rs485_config) + return -ENOIOCTLCMD; + + switch (cmd) { + case TIOCSRS485: + if (copy_from_user(&rs485_config, (void __user *)arg, + sizeof(rs485_config))) + return -EFAULT; + + ret = up->rs485_config(up, &rs485_config); + if (ret) + return ret; + + memcpy(&up->rs485, &rs485_config, sizeof(rs485_config)); + + return 0; + case TIOCGRS485: + if (copy_to_user((void __user *)arg, &up->rs485, + sizeof(up->rs485))) + return -EFAULT; + return 0; + default: + break; + } + + return -ENOIOCTLCMD; +} + static const char * serial8250_type(struct uart_port *port) { @@ -2859,6 +3027,8 @@ static struct uart_ops serial8250_pops = { .get_mctrl = serial8250_get_mctrl, .stop_tx = serial8250_stop_tx, .start_tx = serial8250_start_tx, + .throttle = serial8250_throttle, + .unthrottle = serial8250_unthrottle, .stop_rx = serial8250_stop_rx, .enable_ms = serial8250_enable_ms, .break_ctl = serial8250_break_ctl, @@ -2872,6 +3042,7 @@ static struct uart_ops serial8250_pops = { .request_port = serial8250_request_port, .config_port = serial8250_config_port, .verify_port = serial8250_verify_port, + .ioctl = serial8250_ioctl, #ifdef CONFIG_CONSOLE_POLL .poll_get_char = serial8250_get_poll_char, .poll_put_char = serial8250_put_poll_char, @@ -2880,6 +3051,24 @@ static struct uart_ops serial8250_pops = { static struct uart_8250_port serial8250_ports[UART_NR]; +/** + * serial8250_get_port - retrieve struct uart_8250_port + * @line: serial line number + * + * This function retrieves struct uart_8250_port for the specific line. + * This struct *must* *not* be used to perform a 8250 or serial core operation + * which is not accessible otherwise. Its only purpose is to make the struct + * accessible to the runtime-pm callbacks for context suspend/restore. + * The lock assumption made here is none because runtime-pm suspend/resume + * callbacks should not be invoked if there is any operation performed on the + * port. + */ +struct uart_8250_port *serial8250_get_port(int line) +{ + return &serial8250_ports[line]; +} +EXPORT_SYMBOL_GPL(serial8250_get_port); + static void (*serial8250_isa_config)(int port, struct uart_port *up, unsigned short *capabilities); @@ -3007,6 +3196,8 @@ serial8250_console_write(struct console *co, const char *s, unsigned int count) touch_nmi_watchdog(); + serial8250_rpm_get(up); + if (port->sysrq || oops_in_progress) locked = spin_trylock_irqsave(&port->lock, flags); else @@ -3043,6 +3234,7 @@ serial8250_console_write(struct console *co, const char *s, unsigned int count) if (locked) spin_unlock_irqrestore(&port->lock, flags); + serial8250_rpm_put(up); } static int __init serial8250_console_setup(struct console *co, char *options) @@ -3324,6 +3516,11 @@ static struct uart_8250_port *serial8250_find_match_or_unused(struct uart_port * if (uart_match_port(&serial8250_ports[i].port, port)) return &serial8250_ports[i]; + /* try line number first if still available */ + i = port->line; + if (i < nr_uarts && serial8250_ports[i].port.type == PORT_UNKNOWN && + serial8250_ports[i].port.iobase == 0) + return &serial8250_ports[i]; /* * We didn't find a matching entry, so look for the first * free entry. We look for one which hasn't been previously @@ -3388,6 +3585,10 @@ int serial8250_register_8250_port(struct uart_8250_port *up) uart->port.fifosize = up->port.fifosize; uart->tx_loadsz = up->tx_loadsz; uart->capabilities = up->capabilities; + uart->rs485_config = up->rs485_config; + uart->rs485 = up->rs485; + uart->port.throttle = up->port.throttle; + uart->port.unthrottle = up->port.unthrottle; /* Take tx_loadsz from fifosize if it wasn't set separately */ if (uart->port.fifosize && !uart->tx_loadsz) @@ -3410,6 +3611,10 @@ int serial8250_register_8250_port(struct uart_8250_port *up) /* Possibly override set_termios call */ if (up->port.set_termios) uart->port.set_termios = up->port.set_termios; + if (up->port.startup) + uart->port.startup = up->port.startup; + if (up->port.shutdown) + uart->port.shutdown = up->port.shutdown; if (up->port.pm) uart->port.pm = up->port.pm; if (up->port.handle_break) @@ -3587,7 +3792,7 @@ static void __used s8250_options(void) #ifdef CONFIG_SERIAL_8250_RSA __module_param_call(MODULE_PARAM_PREFIX, probe_rsa, ¶m_array_ops, .arr = &__param_arr_probe_rsa, - 0444, -1); + 0444, -1, 0); #endif } #else diff --git a/drivers/tty/serial/8250/8250_fintek.c b/drivers/tty/serial/8250/8250_fintek.c new file mode 100644 index 000000000000..1bb28cb69493 --- /dev/null +++ b/drivers/tty/serial/8250/8250_fintek.c @@ -0,0 +1,249 @@ +/* + * Probe for F81216A LPC to 4 UART + * + * Based on drivers/tty/serial/8250_pnp.c, by Russell King, et al + * + * Copyright (C) 2014 Ricardo Ribalda, Qtechnology A/S + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License. + */ +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/pnp.h> +#include <linux/kernel.h> +#include <linux/serial_core.h> +#include "8250.h" + +#define ADDR_PORT 0x4E +#define DATA_PORT 0x4F +#define ENTRY_KEY 0x77 +#define EXIT_KEY 0xAA +#define CHIP_ID1 0x20 +#define CHIP_ID1_VAL 0x02 +#define CHIP_ID2 0x21 +#define CHIP_ID2_VAL 0x16 +#define VENDOR_ID1 0x23 +#define VENDOR_ID1_VAL 0x19 +#define VENDOR_ID2 0x24 +#define VENDOR_ID2_VAL 0x34 +#define LDN 0x7 + +#define RS485 0xF0 +#define RTS_INVERT BIT(5) +#define RS485_URA BIT(4) +#define RXW4C_IRA BIT(3) +#define TXW4C_IRA BIT(2) + +#define DRIVER_NAME "8250_fintek" + +static int fintek_8250_enter_key(void){ + + if (!request_muxed_region(ADDR_PORT, 2, DRIVER_NAME)) + return -EBUSY; + + outb(ENTRY_KEY, ADDR_PORT); + outb(ENTRY_KEY, ADDR_PORT); + return 0; +} + +static void fintek_8250_exit_key(void){ + + outb(EXIT_KEY, ADDR_PORT); + release_region(ADDR_PORT, 2); +} + +static int fintek_8250_get_index(resource_size_t base_addr) +{ + resource_size_t base[] = {0x3f8, 0x2f8, 0x3e8, 0x2e8}; + int i; + + for (i = 0; i < ARRAY_SIZE(base); i++) + if (base_addr == base[i]) + return i; + + return -ENODEV; +} + +static int fintek_8250_check_id(void) +{ + + outb(CHIP_ID1, ADDR_PORT); + if (inb(DATA_PORT) != CHIP_ID1_VAL) + return -ENODEV; + + outb(CHIP_ID2, ADDR_PORT); + if (inb(DATA_PORT) != CHIP_ID2_VAL) + return -ENODEV; + + outb(VENDOR_ID1, ADDR_PORT); + if (inb(DATA_PORT) != VENDOR_ID1_VAL) + return -ENODEV; + + outb(VENDOR_ID2, ADDR_PORT); + if (inb(DATA_PORT) != VENDOR_ID2_VAL) + return -ENODEV; + + return 0; +} + +static int fintek_8250_rs4850_config(struct uart_8250_port *uart, + struct serial_rs485 *rs485) +{ + uint8_t config = 0; + int index = fintek_8250_get_index(uart->port.iobase); + + if (index < 0) + return -EINVAL; + + if (rs485->flags & SER_RS485_ENABLED) + memset(rs485->padding, 0, sizeof(rs485->padding)); + else + memset(rs485, 0, sizeof(*rs485)); + + rs485->flags &= SER_RS485_ENABLED | SER_RS485_RTS_ON_SEND | + SER_RS485_RTS_AFTER_SEND; + + if (rs485->delay_rts_before_send) { + rs485->delay_rts_before_send = 1; + config |= TXW4C_IRA; + } + + if (rs485->delay_rts_after_send) { + rs485->delay_rts_after_send = 1; + config |= RXW4C_IRA; + } + + if ((!!(rs485->flags & SER_RS485_RTS_ON_SEND)) == + (!!(rs485->flags & SER_RS485_RTS_AFTER_SEND))) + rs485->flags &= SER_RS485_ENABLED; + else + config |= RS485_URA; + + if (rs485->flags & SER_RS485_RTS_ON_SEND) + config |= RTS_INVERT; + + if (fintek_8250_enter_key()) + return -EBUSY; + + outb(LDN, ADDR_PORT); + outb(index, DATA_PORT); + outb(RS485, ADDR_PORT); + outb(config, DATA_PORT); + fintek_8250_exit_key(); + + return 0; +} + +static int +fintek_8250_probe(struct pnp_dev *dev, const struct pnp_device_id *dev_id) +{ + int line; + struct uart_8250_port uart; + int ret; + + if (!pnp_port_valid(dev, 0)) + return -ENODEV; + + if (fintek_8250_get_index(pnp_port_start(dev, 0)) < 0) + return -ENODEV; + + /* Enable configuration registers*/ + if (fintek_8250_enter_key()) + return -EBUSY; + + /*Check ID*/ + ret = fintek_8250_check_id(); + fintek_8250_exit_key(); + if (ret) + return ret; + + memset(&uart, 0, sizeof(uart)); + if (!pnp_irq_valid(dev, 0)) + return -ENODEV; + uart.port.irq = pnp_irq(dev, 0); + uart.port.iobase = pnp_port_start(dev, 0); + uart.port.iotype = UPIO_PORT; + uart.rs485_config = fintek_8250_rs4850_config; + + uart.port.flags |= UPF_SKIP_TEST | UPF_BOOT_AUTOCONF; + if (pnp_irq_flags(dev, 0) & IORESOURCE_IRQ_SHAREABLE) + uart.port.flags |= UPF_SHARE_IRQ; + uart.port.uartclk = 1843200; + uart.port.dev = &dev->dev; + + line = serial8250_register_8250_port(&uart); + if (line < 0) + return -ENODEV; + + pnp_set_drvdata(dev, (void *)((long)line + 1)); + return 0; +} + +static void fintek_8250_remove(struct pnp_dev *dev) +{ + long line = (long)pnp_get_drvdata(dev); + + if (line) + serial8250_unregister_port(line - 1); +} + +#ifdef CONFIG_PM +static int fintek_8250_suspend(struct pnp_dev *dev, pm_message_t state) +{ + long line = (long)pnp_get_drvdata(dev); + + if (!line) + return -ENODEV; + serial8250_suspend_port(line - 1); + return 0; +} + +static int fintek_8250_resume(struct pnp_dev *dev) +{ + long line = (long)pnp_get_drvdata(dev); + + if (!line) + return -ENODEV; + serial8250_resume_port(line - 1); + return 0; +} +#else +#define fintek_8250_suspend NULL +#define fintek_8250_resume NULL +#endif /* CONFIG_PM */ + +static const struct pnp_device_id fintek_dev_table[] = { + /* Qtechnology Panel PC / IO1000 */ + { "PNP0501"}, + {} +}; + +MODULE_DEVICE_TABLE(pnp, fintek_dev_table); + +static struct pnp_driver fintek_8250_driver = { + .name = DRIVER_NAME, + .probe = fintek_8250_probe, + .remove = fintek_8250_remove, + .suspend = fintek_8250_suspend, + .resume = fintek_8250_resume, + .id_table = fintek_dev_table, +}; + +static int fintek_8250_init(void) +{ + return pnp_register_driver(&fintek_8250_driver); +} +module_init(fintek_8250_init); + +static void fintek_8250_exit(void) +{ + pnp_unregister_driver(&fintek_8250_driver); +} +module_exit(fintek_8250_exit); + +MODULE_DESCRIPTION("Fintek F812164 module"); +MODULE_AUTHOR("Ricardo Ribalda <ricardo.ribalda@gmail.com>"); +MODULE_LICENSE("GPL"); diff --git a/drivers/tty/serial/8250/8250_hp300.c b/drivers/tty/serial/8250/8250_hp300.c index 5bdaf271d395..afffe4d1f034 100644 --- a/drivers/tty/serial/8250/8250_hp300.c +++ b/drivers/tty/serial/8250/8250_hp300.c @@ -21,7 +21,7 @@ #include "8250.h" #if !defined(CONFIG_HPDCA) && !defined(CONFIG_HPAPCI) -#warning CONFIG_8250 defined but neither CONFIG_HPDCA nor CONFIG_HPAPCI defined, are you sure? +#warning CONFIG_SERIAL_8250 defined but neither CONFIG_HPDCA nor CONFIG_HPAPCI defined, are you sure? #endif #ifdef CONFIG_HPAPCI diff --git a/drivers/tty/serial/8250/8250_mtk.c b/drivers/tty/serial/8250/8250_mtk.c new file mode 100644 index 000000000000..8f37d57165ec --- /dev/null +++ b/drivers/tty/serial/8250/8250_mtk.c @@ -0,0 +1,294 @@ +/* + * Mediatek 8250 driver. + * + * Copyright (c) 2014 MundoReader S.L. + * Author: Matthias Brugger <matthias.bgg@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ +#include <linux/clk.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/of_irq.h> +#include <linux/of_platform.h> +#include <linux/platform_device.h> +#include <linux/pm_runtime.h> +#include <linux/serial_8250.h> +#include <linux/serial_reg.h> + +#include "8250.h" + +#define UART_MTK_HIGHS 0x09 /* Highspeed register */ +#define UART_MTK_SAMPLE_COUNT 0x0a /* Sample count register */ +#define UART_MTK_SAMPLE_POINT 0x0b /* Sample point register */ +#define MTK_UART_RATE_FIX 0x0d /* UART Rate Fix Register */ + +struct mtk8250_data { + int line; + struct clk *uart_clk; +}; + +static void +mtk8250_set_termios(struct uart_port *port, struct ktermios *termios, + struct ktermios *old) +{ + unsigned long flags; + unsigned int baud, quot; + + struct uart_8250_port *up = + container_of(port, struct uart_8250_port, port); + + serial8250_do_set_termios(port, termios, old); + + /* + * Mediatek UARTs use an extra highspeed register (UART_MTK_HIGHS) + * + * We need to recalcualte the quot register, as the claculation depends + * on the vaule in the highspeed register. + * + * Some baudrates are not supported by the chip, so we use the next + * lower rate supported and update termios c_flag. + * + * If highspeed register is set to 3, we need to specify sample count + * and sample point to increase accuracy. If not, we reset the + * registers to their default values. + */ + baud = uart_get_baud_rate(port, termios, old, + port->uartclk / 16 / 0xffff, + port->uartclk / 16); + + if (baud <= 115200) { + serial_port_out(port, UART_MTK_HIGHS, 0x0); + quot = uart_get_divisor(port, baud); + } else if (baud <= 576000) { + serial_port_out(port, UART_MTK_HIGHS, 0x2); + + /* Set to next lower baudrate supported */ + if ((baud == 500000) || (baud == 576000)) + baud = 460800; + quot = DIV_ROUND_CLOSEST(port->uartclk, 4 * baud); + } else { + serial_port_out(port, UART_MTK_HIGHS, 0x3); + + /* Set to highest baudrate supported */ + if (baud >= 1152000) + baud = 921600; + quot = DIV_ROUND_CLOSEST(port->uartclk, 256 * baud); + } + + /* + * Ok, we're now changing the port state. Do it with + * interrupts disabled. + */ + spin_lock_irqsave(&port->lock, flags); + + /* set DLAB we have cval saved in up->lcr from the call to the core */ + serial_port_out(port, UART_LCR, up->lcr | UART_LCR_DLAB); + serial_dl_write(up, quot); + + /* reset DLAB */ + serial_port_out(port, UART_LCR, up->lcr); + + if (baud > 460800) { + unsigned int tmp; + + tmp = DIV_ROUND_CLOSEST(port->uartclk, quot * baud); + serial_port_out(port, UART_MTK_SAMPLE_COUNT, tmp - 1); + serial_port_out(port, UART_MTK_SAMPLE_POINT, + (tmp - 2) >> 1); + } else { + serial_port_out(port, UART_MTK_SAMPLE_COUNT, 0x00); + serial_port_out(port, UART_MTK_SAMPLE_POINT, 0xff); + } + + spin_unlock_irqrestore(&port->lock, flags); + /* Don't rewrite B0 */ + if (tty_termios_baud_rate(termios)) + tty_termios_encode_baud_rate(termios, baud, baud); +} + +static void +mtk8250_do_pm(struct uart_port *port, unsigned int state, unsigned int old) +{ + if (!state) + pm_runtime_get_sync(port->dev); + + serial8250_do_pm(port, state, old); + + if (state) + pm_runtime_put_sync_suspend(port->dev); +} + +static int mtk8250_probe_of(struct platform_device *pdev, struct uart_port *p, + struct mtk8250_data *data) +{ + int err; + struct device_node *np = pdev->dev.of_node; + + data->uart_clk = of_clk_get(np, 0); + if (IS_ERR(data->uart_clk)) { + dev_warn(&pdev->dev, "Can't get timer clock\n"); + return PTR_ERR(data->uart_clk); + } + + err = clk_prepare_enable(data->uart_clk); + if (err) { + dev_warn(&pdev->dev, "Can't prepare clock\n"); + clk_put(data->uart_clk); + return err; + } + p->uartclk = clk_get_rate(data->uart_clk); + + return 0; +} + +static int mtk8250_probe(struct platform_device *pdev) +{ + struct uart_8250_port uart = {}; + struct resource *regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); + struct resource *irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0); + struct mtk8250_data *data; + int err; + + if (!regs || !irq) { + dev_err(&pdev->dev, "no registers/irq defined\n"); + return -EINVAL; + } + + uart.port.membase = devm_ioremap(&pdev->dev, regs->start, + resource_size(regs)); + if (!uart.port.membase) + return -ENOMEM; + + data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + if (pdev->dev.of_node) { + err = mtk8250_probe_of(pdev, &uart.port, data); + if (err) + return err; + } else + return -ENODEV; + + spin_lock_init(&uart.port.lock); + uart.port.mapbase = regs->start; + uart.port.irq = irq->start; + uart.port.pm = mtk8250_do_pm; + uart.port.type = PORT_16550; + uart.port.flags = UPF_BOOT_AUTOCONF | UPF_FIXED_PORT; + uart.port.dev = &pdev->dev; + uart.port.iotype = UPIO_MEM32; + uart.port.regshift = 2; + uart.port.private_data = data; + uart.port.set_termios = mtk8250_set_termios; + + /* Disable Rate Fix function */ + writel(0x0, uart.port.membase + + (MTK_UART_RATE_FIX << uart.port.regshift)); + + data->line = serial8250_register_8250_port(&uart); + if (data->line < 0) + return data->line; + + platform_set_drvdata(pdev, data); + + pm_runtime_set_active(&pdev->dev); + pm_runtime_enable(&pdev->dev); + + return 0; +} + +static int mtk8250_remove(struct platform_device *pdev) +{ + struct mtk8250_data *data = platform_get_drvdata(pdev); + + pm_runtime_get_sync(&pdev->dev); + + serial8250_unregister_port(data->line); + if (!IS_ERR(data->uart_clk)) { + clk_disable_unprepare(data->uart_clk); + clk_put(data->uart_clk); + } + + pm_runtime_disable(&pdev->dev); + pm_runtime_put_noidle(&pdev->dev); + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int mtk8250_suspend(struct device *dev) +{ + struct mtk8250_data *data = dev_get_drvdata(dev); + + serial8250_suspend_port(data->line); + + return 0; +} + +static int mtk8250_resume(struct device *dev) +{ + struct mtk8250_data *data = dev_get_drvdata(dev); + + serial8250_resume_port(data->line); + + return 0; +} +#endif /* CONFIG_PM_SLEEP */ + +#ifdef CONFIG_PM_RUNTIME +static int mtk8250_runtime_suspend(struct device *dev) +{ + struct mtk8250_data *data = dev_get_drvdata(dev); + + if (!IS_ERR(data->uart_clk)) + clk_disable_unprepare(data->uart_clk); + + return 0; +} + +static int mtk8250_runtime_resume(struct device *dev) +{ + struct mtk8250_data *data = dev_get_drvdata(dev); + + if (!IS_ERR(data->uart_clk)) + clk_prepare_enable(data->uart_clk); + + return 0; +} +#endif + +static const struct dev_pm_ops mtk8250_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(mtk8250_suspend, mtk8250_resume) + SET_RUNTIME_PM_OPS(mtk8250_runtime_suspend, mtk8250_runtime_resume, + NULL) +}; + +static const struct of_device_id mtk8250_of_match[] = { + { .compatible = "mediatek,mt6577-uart" }, + { /* Sentinel */ } +}; +MODULE_DEVICE_TABLE(of, mtk8250_of_match); + +static struct platform_driver mtk8250_platform_driver = { + .driver = { + .name = "mt6577-uart", + .pm = &mtk8250_pm_ops, + .of_match_table = mtk8250_of_match, + }, + .probe = mtk8250_probe, + .remove = mtk8250_remove, +}; +module_platform_driver(mtk8250_platform_driver); + +MODULE_AUTHOR("Matthias Brugger"); +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("Mediatek 8250 serial port driver"); diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c index 61830b1792eb..4f1cd296f1b1 100644 --- a/drivers/tty/serial/8250/8250_pci.c +++ b/drivers/tty/serial/8250/8250_pci.c @@ -1355,9 +1355,6 @@ ce4100_serial_setup(struct serial_private *priv, #define BYT_PRV_CLK_N_VAL_SHIFT 16 #define BYT_PRV_CLK_UPDATE (1 << 31) -#define BYT_GENERAL_REG 0x808 -#define BYT_GENERAL_DIS_RTS_N_OVERRIDE (1 << 3) - #define BYT_TX_OVF_INT 0x820 #define BYT_TX_OVF_INT_MASK (1 << 1) @@ -1412,16 +1409,6 @@ byt_set_termios(struct uart_port *p, struct ktermios *termios, reg |= BYT_PRV_CLK_EN | BYT_PRV_CLK_UPDATE; writel(reg, p->membase + BYT_PRV_CLK); - /* - * If auto-handshake mechanism is not enabled, - * disable rts_n override - */ - reg = readl(p->membase + BYT_GENERAL_REG); - reg &= ~BYT_GENERAL_DIS_RTS_N_OVERRIDE; - if (termios->c_cflag & CRTSCTS) - reg |= BYT_GENERAL_DIS_RTS_N_OVERRIDE; - writel(reg, p->membase + BYT_GENERAL_REG); - serial8250_do_set_termios(p, termios, old); } @@ -1788,6 +1775,7 @@ pci_wch_ch353_setup(struct serial_private *priv, #define PCI_DEVICE_ID_COMMTECH_4222PCIE 0x0022 #define PCI_DEVICE_ID_BROADCOM_TRUMANAGE 0x160a #define PCI_DEVICE_ID_AMCC_ADDIDATA_APCI7800 0x818e +#define PCI_DEVICE_ID_INTEL_QRK_UART 0x0936 #define PCI_VENDOR_ID_SUNIX 0x1fd4 #define PCI_DEVICE_ID_SUNIX_1999 0x1999 @@ -1898,6 +1886,13 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = { .subdevice = PCI_ANY_ID, .setup = byt_serial_setup, }, + { + .vendor = PCI_VENDOR_ID_INTEL, + .device = PCI_DEVICE_ID_INTEL_QRK_UART, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = pci_default_setup, + }, /* * ITE */ @@ -2740,6 +2735,7 @@ enum pci_board_num_t { pbn_ADDIDATA_PCIe_8_3906250, pbn_ce4100_1_115200, pbn_byt, + pbn_qrk, pbn_omegapci, pbn_NETMOS9900_2s_115200, pbn_brcm_trumanage, @@ -3490,6 +3486,12 @@ static struct pciserial_board pci_boards[] = { .uart_offset = 0x80, .reg_shift = 2, }, + [pbn_qrk] = { + .flags = FL_BASE0, + .num_ports = 1, + .base_baud = 2764800, + .reg_shift = 2, + }, [pbn_omegapci] = { .flags = FL_BASE0, .num_ports = 8, @@ -5192,6 +5194,12 @@ static struct pci_device_id serial_pci_tbl[] = { pbn_byt }, /* + * Intel Quark x1000 + */ + { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_QRK_UART, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_qrk }, + /* * Cronyx Omega PCI */ { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_CRONYX_OMEGA, diff --git a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig index 349ee598b34c..21eca79224e4 100644 --- a/drivers/tty/serial/8250/Kconfig +++ b/drivers/tty/serial/8250/Kconfig @@ -298,3 +298,18 @@ config SERIAL_8250_RT288X If you have a Ralink RT288x/RT305x SoC based board and want to use the serial port, say Y to this option. The driver can handle up to 2 serial ports. If unsure, say N. + +config SERIAL_8250_FINTEK + tristate "Support for Fintek F81216A LPC to 4 UART" + depends on SERIAL_8250 && PNP + help + Selecting this option will add support for the Fintek F81216A + LPC to 4 UART. This device has some RS485 functionality not available + through the PNP driver. If unsure, say N. + +config SERIAL_8250_MT6577 + bool "Mediatek serial port support" + depends on SERIAL_8250 && ARCH_MEDIATEK + help + If you have a Mediatek based board and want to use the + serial port, say Y to this option. If unsure, say N. diff --git a/drivers/tty/serial/8250/Makefile b/drivers/tty/serial/8250/Makefile index 36d68d054307..5256b894e46a 100644 --- a/drivers/tty/serial/8250/Makefile +++ b/drivers/tty/serial/8250/Makefile @@ -20,3 +20,5 @@ obj-$(CONFIG_SERIAL_8250_HUB6) += 8250_hub6.o obj-$(CONFIG_SERIAL_8250_FSL) += 8250_fsl.o obj-$(CONFIG_SERIAL_8250_DW) += 8250_dw.o obj-$(CONFIG_SERIAL_8250_EM) += 8250_em.o +obj-$(CONFIG_SERIAL_8250_FINTEK) += 8250_fintek.o +obj-$(CONFIG_SERIAL_8250_MT6577) += 8250_mtk.o diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig index 26cec64dadd7..649b784081c7 100644 --- a/drivers/tty/serial/Kconfig +++ b/drivers/tty/serial/Kconfig @@ -200,10 +200,29 @@ config SERIAL_KS8695_CONSOLE receives all kernel messages and warnings and which allows logins in single user mode). +config SERIAL_MESON + tristate "Meson serial port support" + depends on ARCH_MESON + select SERIAL_CORE + help + This enables the driver for the on-chip UARTs of the Amlogic + MesonX processors. + +config SERIAL_MESON_CONSOLE + bool "Support for console on meson" + depends on SERIAL_MESON=y + select SERIAL_CORE_CONSOLE + help + Say Y here if you wish to use a Amlogic MesonX UART as the + system console (the system console is the device which + receives all kernel messages and warnings and which allows + logins in single user mode) as /dev/ttyAMLx. + config SERIAL_CLPS711X tristate "CLPS711X serial port support" depends on ARCH_CLPS711X || COMPILE_TEST select SERIAL_CORE + select SERIAL_MCTRL_GPIO if GPIOLIB help This enables the driver for the on-chip UARTs of the Cirrus Logic EP711x/EP721x/EP731x processors. @@ -220,7 +239,7 @@ config SERIAL_CLPS711X_CONSOLE config SERIAL_SAMSUNG tristate "Samsung SoC serial support" - depends on PLAT_SAMSUNG + depends on PLAT_SAMSUNG || ARCH_EXYNOS select SERIAL_CORE help Support for the on-chip UARTs on the Samsung S3C24XX series CPUs, @@ -1051,6 +1070,7 @@ config SERIAL_MSM_CONSOLE bool "MSM serial console support" depends on SERIAL_MSM=y select SERIAL_CORE_CONSOLE + select SERIAL_EARLYCON config SERIAL_MSM_HS tristate "MSM UART High Speed: Serial Driver" @@ -1410,6 +1430,7 @@ config SERIAL_XILINX_PS_UART_CONSOLE bool "Cadence UART console support" depends on SERIAL_XILINX_PS_UART=y select SERIAL_CORE_CONSOLE + select SERIAL_EARLYCON help Enable a Cadence UART port to be the system console. diff --git a/drivers/tty/serial/Makefile b/drivers/tty/serial/Makefile index 0080cc362e09..9a548acf5fdc 100644 --- a/drivers/tty/serial/Makefile +++ b/drivers/tty/serial/Makefile @@ -48,6 +48,7 @@ obj-$(CONFIG_SERIAL_MPC52xx) += mpc52xx_uart.o obj-$(CONFIG_SERIAL_ICOM) += icom.o obj-$(CONFIG_SERIAL_M32R_SIO) += m32r_sio.o obj-$(CONFIG_SERIAL_MPSC) += mpsc.o +obj-$(CONFIG_SERIAL_MESON) += meson_uart.o obj-$(CONFIG_SERIAL_SB1250_DUART) += sb1250-duart.o obj-$(CONFIG_ETRAX_SERIAL) += crisv10.o obj-$(CONFIG_SERIAL_SCCNXP) += sccnxp.o diff --git a/drivers/tty/serial/altera_jtaguart.c b/drivers/tty/serial/altera_jtaguart.c index d22e3d98ae23..932e01995c0a 100644 --- a/drivers/tty/serial/altera_jtaguart.c +++ b/drivers/tty/serial/altera_jtaguart.c @@ -462,7 +462,7 @@ static int altera_jtaguart_remove(struct platform_device *pdev) } #ifdef CONFIG_OF -static struct of_device_id altera_jtaguart_match[] = { +static const struct of_device_id altera_jtaguart_match[] = { { .compatible = "ALTR,juart-1.0", }, { .compatible = "altr,juart-1.0", }, {}, diff --git a/drivers/tty/serial/altera_uart.c b/drivers/tty/serial/altera_uart.c index 6a243239dbef..1cb2cdb1bc42 100644 --- a/drivers/tty/serial/altera_uart.c +++ b/drivers/tty/serial/altera_uart.c @@ -610,7 +610,7 @@ static int altera_uart_remove(struct platform_device *pdev) } #ifdef CONFIG_OF -static struct of_device_id altera_uart_match[] = { +static const struct of_device_id altera_uart_match[] = { { .compatible = "ALTR,uart-1.0", }, { .compatible = "altr,uart-1.0", }, {}, diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c index 8572f2a57fc8..02016fcd91b8 100644 --- a/drivers/tty/serial/amba-pl011.c +++ b/drivers/tty/serial/amba-pl011.c @@ -678,7 +678,8 @@ static void pl011_dma_flush_buffer(struct uart_port *port) __releases(&uap->port.lock) __acquires(&uap->port.lock) { - struct uart_amba_port *uap = (struct uart_amba_port *)port; + struct uart_amba_port *uap = + container_of(port, struct uart_amba_port, port); if (!uap->using_tx_dma) return; @@ -1163,7 +1164,8 @@ static inline bool pl011_dma_rx_running(struct uart_amba_port *uap) static void pl011_stop_tx(struct uart_port *port) { - struct uart_amba_port *uap = (struct uart_amba_port *)port; + struct uart_amba_port *uap = + container_of(port, struct uart_amba_port, port); uap->im &= ~UART011_TXIM; writew(uap->im, uap->port.membase + UART011_IMSC); @@ -1172,7 +1174,8 @@ static void pl011_stop_tx(struct uart_port *port) static void pl011_start_tx(struct uart_port *port) { - struct uart_amba_port *uap = (struct uart_amba_port *)port; + struct uart_amba_port *uap = + container_of(port, struct uart_amba_port, port); if (!pl011_dma_tx_start(uap)) { uap->im |= UART011_TXIM; @@ -1182,7 +1185,8 @@ static void pl011_start_tx(struct uart_port *port) static void pl011_stop_rx(struct uart_port *port) { - struct uart_amba_port *uap = (struct uart_amba_port *)port; + struct uart_amba_port *uap = + container_of(port, struct uart_amba_port, port); uap->im &= ~(UART011_RXIM|UART011_RTIM|UART011_FEIM| UART011_PEIM|UART011_BEIM|UART011_OEIM); @@ -1193,7 +1197,8 @@ static void pl011_stop_rx(struct uart_port *port) static void pl011_enable_ms(struct uart_port *port) { - struct uart_amba_port *uap = (struct uart_amba_port *)port; + struct uart_amba_port *uap = + container_of(port, struct uart_amba_port, port); uap->im |= UART011_RIMIM|UART011_CTSMIM|UART011_DCDMIM|UART011_DSRMIM; writew(uap->im, uap->port.membase + UART011_IMSC); @@ -1349,14 +1354,16 @@ static irqreturn_t pl011_int(int irq, void *dev_id) static unsigned int pl011_tx_empty(struct uart_port *port) { - struct uart_amba_port *uap = (struct uart_amba_port *)port; + struct uart_amba_port *uap = + container_of(port, struct uart_amba_port, port); unsigned int status = readw(uap->port.membase + UART01x_FR); return status & (UART01x_FR_BUSY|UART01x_FR_TXFF) ? 0 : TIOCSER_TEMT; } static unsigned int pl011_get_mctrl(struct uart_port *port) { - struct uart_amba_port *uap = (struct uart_amba_port *)port; + struct uart_amba_port *uap = + container_of(port, struct uart_amba_port, port); unsigned int result = 0; unsigned int status = readw(uap->port.membase + UART01x_FR); @@ -1374,7 +1381,8 @@ static unsigned int pl011_get_mctrl(struct uart_port *port) static void pl011_set_mctrl(struct uart_port *port, unsigned int mctrl) { - struct uart_amba_port *uap = (struct uart_amba_port *)port; + struct uart_amba_port *uap = + container_of(port, struct uart_amba_port, port); unsigned int cr; cr = readw(uap->port.membase + UART011_CR); @@ -1402,7 +1410,8 @@ static void pl011_set_mctrl(struct uart_port *port, unsigned int mctrl) static void pl011_break_ctl(struct uart_port *port, int break_state) { - struct uart_amba_port *uap = (struct uart_amba_port *)port; + struct uart_amba_port *uap = + container_of(port, struct uart_amba_port, port); unsigned long flags; unsigned int lcr_h; @@ -1420,7 +1429,8 @@ static void pl011_break_ctl(struct uart_port *port, int break_state) static void pl011_quiesce_irqs(struct uart_port *port) { - struct uart_amba_port *uap = (struct uart_amba_port *)port; + struct uart_amba_port *uap = + container_of(port, struct uart_amba_port, port); unsigned char __iomem *regs = uap->port.membase; writew(readw(regs + UART011_MIS), regs + UART011_ICR); @@ -1442,7 +1452,8 @@ static void pl011_quiesce_irqs(struct uart_port *port) static int pl011_get_poll_char(struct uart_port *port) { - struct uart_amba_port *uap = (struct uart_amba_port *)port; + struct uart_amba_port *uap = + container_of(port, struct uart_amba_port, port); unsigned int status; /* @@ -1461,7 +1472,8 @@ static int pl011_get_poll_char(struct uart_port *port) static void pl011_put_poll_char(struct uart_port *port, unsigned char ch) { - struct uart_amba_port *uap = (struct uart_amba_port *)port; + struct uart_amba_port *uap = + container_of(port, struct uart_amba_port, port); while (readw(uap->port.membase + UART01x_FR) & UART01x_FR_TXFF) barrier(); @@ -1473,7 +1485,8 @@ static void pl011_put_poll_char(struct uart_port *port, static int pl011_hwinit(struct uart_port *port) { - struct uart_amba_port *uap = (struct uart_amba_port *)port; + struct uart_amba_port *uap = + container_of(port, struct uart_amba_port, port); int retval; /* Optionaly enable pins to be muxed in and configured */ @@ -1526,7 +1539,8 @@ static void pl011_write_lcr_h(struct uart_amba_port *uap, unsigned int lcr_h) static int pl011_startup(struct uart_port *port) { - struct uart_amba_port *uap = (struct uart_amba_port *)port; + struct uart_amba_port *uap = + container_of(port, struct uart_amba_port, port); unsigned int cr, lcr_h, fbrd, ibrd; int retval; @@ -1618,7 +1632,8 @@ static void pl011_shutdown_channel(struct uart_amba_port *uap, static void pl011_shutdown(struct uart_port *port) { - struct uart_amba_port *uap = (struct uart_amba_port *)port; + struct uart_amba_port *uap = + container_of(port, struct uart_amba_port, port); unsigned int cr; /* @@ -1680,7 +1695,8 @@ static void pl011_set_termios(struct uart_port *port, struct ktermios *termios, struct ktermios *old) { - struct uart_amba_port *uap = (struct uart_amba_port *)port; + struct uart_amba_port *uap = + container_of(port, struct uart_amba_port, port); unsigned int lcr_h, old_cr; unsigned long flags; unsigned int baud, quot, clkdiv; @@ -1822,7 +1838,8 @@ pl011_set_termios(struct uart_port *port, struct ktermios *termios, static const char *pl011_type(struct uart_port *port) { - struct uart_amba_port *uap = (struct uart_amba_port *)port; + struct uart_amba_port *uap = + container_of(port, struct uart_amba_port, port); return uap->port.type == PORT_AMBA ? uap->type : NULL; } @@ -1900,7 +1917,8 @@ static struct uart_amba_port *amba_ports[UART_NR]; static void pl011_console_putchar(struct uart_port *port, int ch) { - struct uart_amba_port *uap = (struct uart_amba_port *)port; + struct uart_amba_port *uap = + container_of(port, struct uart_amba_port, port); while (readw(uap->port.membase + UART01x_FR) & UART01x_FR_TXFF) barrier(); diff --git a/drivers/tty/serial/bfin_sport_uart.c b/drivers/tty/serial/bfin_sport_uart.c index 7810aa290edf..d62d8daac8ab 100644 --- a/drivers/tty/serial/bfin_sport_uart.c +++ b/drivers/tty/serial/bfin_sport_uart.c @@ -33,6 +33,7 @@ #include <linux/tty.h> #include <linux/tty_flip.h> #include <linux/serial_core.h> +#include <linux/gpio.h> #include <asm/bfin_sport.h> #include <asm/delay.h> diff --git a/drivers/tty/serial/bfin_uart.c b/drivers/tty/serial/bfin_uart.c index dec0fd725d80..7da9911e95f0 100644 --- a/drivers/tty/serial/bfin_uart.c +++ b/drivers/tty/serial/bfin_uart.c @@ -108,22 +108,23 @@ static void bfin_serial_set_mctrl(struct uart_port *port, unsigned int mctrl) static irqreturn_t bfin_serial_mctrl_cts_int(int irq, void *dev_id) { struct bfin_serial_port *uart = dev_id; - unsigned int status = bfin_serial_get_mctrl(&uart->port); + struct uart_port *uport = &uart->port; + unsigned int status = bfin_serial_get_mctrl(uport); #ifdef CONFIG_SERIAL_BFIN_HARD_CTSRTS - struct tty_struct *tty = uart->port.state->port.tty; UART_CLEAR_SCTS(uart); - if (tty->hw_stopped) { + if (uport->hw_stopped) { if (status) { - tty->hw_stopped = 0; - uart_write_wakeup(&uart->port); + uport->hw_stopped = 0; + uart_write_wakeup(uport); } } else { if (!status) - tty->hw_stopped = 1; + uport->hw_stopped = 1; } +#else + uart_handle_cts_change(uport, status & TIOCM_CTS); #endif - uart_handle_cts_change(&uart->port, status & TIOCM_CTS); return IRQ_HANDLED; } diff --git a/drivers/tty/serial/clps711x.c b/drivers/tty/serial/clps711x.c index f5b4c3d7e38f..acfe31773643 100644 --- a/drivers/tty/serial/clps711x.c +++ b/drivers/tty/serial/clps711x.c @@ -33,6 +33,8 @@ #include <linux/mfd/syscon.h> #include <linux/mfd/syscon/clps711x.h> +#include "serial_mctrl_gpio.h" + #define UART_CLPS711X_DEVNAME "ttyCL" #define UART_CLPS711X_NR 2 #define UART_CLPS711X_MAJOR 204 @@ -62,7 +64,7 @@ struct clps711x_port { unsigned int tx_enabled; int rx_irq; struct regmap *syscon; - bool use_ms; + struct mctrl_gpios *gpios; }; static struct uart_driver clps711x_uart = { @@ -198,28 +200,17 @@ static unsigned int uart_clps711x_tx_empty(struct uart_port *port) static unsigned int uart_clps711x_get_mctrl(struct uart_port *port) { + unsigned int result = TIOCM_DSR | TIOCM_CTS | TIOCM_CAR; struct clps711x_port *s = dev_get_drvdata(port->dev); - unsigned int result = 0; - - if (s->use_ms) { - u32 sysflg = 0; - - regmap_read(s->syscon, SYSFLG_OFFSET, &sysflg); - if (sysflg & SYSFLG1_DCD) - result |= TIOCM_CAR; - if (sysflg & SYSFLG1_DSR) - result |= TIOCM_DSR; - if (sysflg & SYSFLG1_CTS) - result |= TIOCM_CTS; - } else - result = TIOCM_DSR | TIOCM_CTS | TIOCM_CAR; - return result; + return mctrl_gpio_get(s->gpios, &result); } static void uart_clps711x_set_mctrl(struct uart_port *port, unsigned int mctrl) { - /* Do nothing */ + struct clps711x_port *s = dev_get_drvdata(port->dev); + + mctrl_gpio_set(s->gpios, mctrl); } static void uart_clps711x_break_ctl(struct uart_port *port, int break_state) @@ -490,15 +481,10 @@ static int uart_clps711x_probe(struct platform_device *pdev) s->syscon = syscon_regmap_lookup_by_pdevname(syscon_name); if (IS_ERR(s->syscon)) return PTR_ERR(s->syscon); - - s->use_ms = !index; } else { s->syscon = syscon_regmap_lookup_by_phandle(np, "syscon"); if (IS_ERR(s->syscon)) return PTR_ERR(s->syscon); - - if (!index) - s->use_ms = of_property_read_bool(np, "uart-use-ms"); } s->port.line = index; @@ -513,6 +499,8 @@ static int uart_clps711x_probe(struct platform_device *pdev) platform_set_drvdata(pdev, s); + s->gpios = mctrl_gpio_init(&pdev->dev, 0); + ret = uart_add_one_port(&clps711x_uart, &s->port); if (ret) return ret; diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c index 044e86d528ae..8f62a3cec23e 100644 --- a/drivers/tty/serial/imx.c +++ b/drivers/tty/serial/imx.c @@ -80,6 +80,7 @@ #define URXD_FRMERR (1<<12) #define URXD_BRK (1<<11) #define URXD_PRERR (1<<10) +#define URXD_RX_DATA (0xFF<<0) #define UCR1_ADEN (1<<15) /* Auto detect interrupt */ #define UCR1_ADBR (1<<14) /* Auto detect baud rate */ #define UCR1_TRDYEN (1<<13) /* Transmitter ready interrupt enable */ @@ -435,12 +436,14 @@ static void imx_stop_rx(struct uart_port *port) struct imx_port *sport = (struct imx_port *)port; unsigned long temp; - /* - * We are maybe in the SMP context, so if the DMA TX thread is running - * on other cpu, we have to wait for it to finish. - */ - if (sport->dma_is_enabled && sport->dma_is_rxing) - return; + if (sport->dma_is_enabled && sport->dma_is_rxing) { + if (sport->port.suspended) { + dmaengine_terminate_all(sport->dma_chan_rx); + sport->dma_is_rxing = 0; + } else { + return; + } + } temp = readl(sport->port.membase + UCR2); writel(temp & ~UCR2_RXEN, sport->port.membase + UCR2); @@ -464,9 +467,19 @@ static inline void imx_transmit_buffer(struct imx_port *sport) { struct circ_buf *xmit = &sport->port.state->xmit; + if (sport->port.x_char) { + /* Send next char */ + writel(sport->port.x_char, sport->port.membase + URTX0); + return; + } + + if (uart_circ_empty(xmit) || uart_tx_stopped(&sport->port)) { + imx_stop_tx(&sport->port); + return; + } + while (!uart_circ_empty(xmit) && - !(readl(sport->port.membase + uts_reg(sport)) - & UTS_TXFULL)) { + !(readl(sport->port.membase + uts_reg(sport)) & UTS_TXFULL)) { /* send xmit->buf[xmit->tail] * out the port here */ writel(xmit->buf[xmit->tail], sport->port.membase + URTX0); @@ -567,9 +580,6 @@ static void imx_start_tx(struct uart_port *port) struct imx_port *sport = (struct imx_port *)port; unsigned long temp; - if (uart_circ_empty(&port->state->xmit)) - return; - if (USE_IRDA(sport)) { /* half duplex in IrDA mode; have to disable receive mode */ temp = readl(sport->port.membase + UCR4); @@ -604,7 +614,10 @@ static void imx_start_tx(struct uart_port *port) } if (sport->dma_is_enabled) { - imx_dma_tx(sport); + /* FIXME: port->x_char must be transmitted if != 0 */ + if (!uart_circ_empty(&port->state->xmit) && + !uart_tx_stopped(port)) + imx_dma_tx(sport); return; } @@ -632,27 +645,10 @@ static irqreturn_t imx_rtsint(int irq, void *dev_id) static irqreturn_t imx_txint(int irq, void *dev_id) { struct imx_port *sport = dev_id; - struct circ_buf *xmit = &sport->port.state->xmit; unsigned long flags; spin_lock_irqsave(&sport->port.lock, flags); - if (sport->port.x_char) { - /* Send next char */ - writel(sport->port.x_char, sport->port.membase + URTX0); - goto out; - } - - if (uart_circ_empty(xmit) || uart_tx_stopped(&sport->port)) { - imx_stop_tx(&sport->port); - goto out; - } - imx_transmit_buffer(sport); - - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) - uart_write_wakeup(&sport->port); - -out: spin_unlock_irqrestore(&sport->port.lock, flags); return IRQ_HANDLED; } @@ -823,11 +819,9 @@ static void imx_set_mctrl(struct uart_port *port, unsigned int mctrl) struct imx_port *sport = (struct imx_port *)port; unsigned long temp; - temp = readl(sport->port.membase + UCR2) & ~UCR2_CTS; - + temp = readl(sport->port.membase + UCR2) & ~(UCR2_CTS | UCR2_CTSC); if (mctrl & TIOCM_RTS) - if (!sport->dma_is_enabled) - temp |= UCR2_CTS; + temp |= UCR2_CTS | UCR2_CTSC; writel(temp, sport->port.membase + UCR2); @@ -1225,9 +1219,18 @@ static void imx_shutdown(struct uart_port *port) unsigned long flags; if (sport->dma_is_enabled) { + int ret; + /* We have to wait for the DMA to finish. */ - wait_event(sport->dma_wait, + ret = wait_event_interruptible(sport->dma_wait, !sport->dma_is_rxing && !sport->dma_is_txing); + if (ret != 0) { + sport->dma_is_rxing = 0; + sport->dma_is_txing = 0; + dmaengine_terminate_all(sport->dma_chan_tx); + dmaengine_terminate_all(sport->dma_chan_rx); + } + imx_stop_tx(port); imx_stop_rx(port); imx_disable_dma(sport); imx_uart_dma_exit(sport); @@ -1506,32 +1509,10 @@ imx_verify_port(struct uart_port *port, struct serial_struct *ser) #if defined(CONFIG_CONSOLE_POLL) static int imx_poll_get_char(struct uart_port *port) { - struct imx_port_ucrs old_ucr; - unsigned int status; - unsigned char c; - - /* save control registers */ - imx_port_ucrs_save(port, &old_ucr); - - /* disable interrupts */ - writel(UCR1_UARTEN, port->membase + UCR1); - writel(old_ucr.ucr2 & ~(UCR2_ATEN | UCR2_RTSEN | UCR2_ESCI), - port->membase + UCR2); - writel(old_ucr.ucr3 & ~(UCR3_DCD | UCR3_RI | UCR3_DTREN), - port->membase + UCR3); - - /* poll */ - do { - status = readl(port->membase + USR2); - } while (~status & USR2_RDR); - - /* read */ - c = readl(port->membase + URXD0); - - /* restore control registers */ - imx_port_ucrs_restore(port, &old_ucr); + if (!(readl(port->membase + USR2) & USR2_RDR)) + return NO_POLL_CHAR; - return c; + return readl(port->membase + URXD0) & URXD_RX_DATA; } static void imx_poll_put_char(struct uart_port *port, unsigned char c) diff --git a/drivers/tty/serial/jsm/jsm.h b/drivers/tty/serial/jsm/jsm.h index 844d5e4eb1aa..af7013488aeb 100644 --- a/drivers/tty/serial/jsm/jsm.h +++ b/drivers/tty/serial/jsm/jsm.h @@ -67,6 +67,16 @@ do { \ #define MAXPORTS 8 #define MAX_STOPS_SENT 5 +/* Board ids */ +#define PCI_DEVICE_ID_NEO_4 0x00B0 +#define PCI_DEVICE_ID_NEO_1_422 0x00CC +#define PCI_DEVICE_ID_NEO_1_422_485 0x00CD +#define PCI_DEVICE_ID_NEO_2_422_485 0x00CE +#define PCIE_DEVICE_ID_NEO_8 0x00F0 +#define PCIE_DEVICE_ID_NEO_4 0x00F1 +#define PCIE_DEVICE_ID_NEO_4RJ45 0x00F2 +#define PCIE_DEVICE_ID_NEO_8RJ45 0x00F3 + /* Board type definitions */ #define T_NEO 0000 diff --git a/drivers/tty/serial/jsm/jsm_driver.c b/drivers/tty/serial/jsm/jsm_driver.c index a47d882d6743..d2885a7bb090 100644 --- a/drivers/tty/serial/jsm/jsm_driver.c +++ b/drivers/tty/serial/jsm/jsm_driver.c @@ -93,12 +93,34 @@ static int jsm_probe_one(struct pci_dev *pdev, const struct pci_device_id *ent) /* store the info for the board we've found */ brd->boardnum = adapter_count++; brd->pci_dev = pdev; - if (pdev->device == PCIE_DEVICE_ID_NEO_4_IBM) + + switch (pdev->device) { + + case PCI_DEVICE_ID_NEO_2DB9: + case PCI_DEVICE_ID_NEO_2DB9PRI: + case PCI_DEVICE_ID_NEO_2RJ45: + case PCI_DEVICE_ID_NEO_2RJ45PRI: + case PCI_DEVICE_ID_NEO_2_422_485: + brd->maxports = 2; + break; + + case PCI_DEVICE_ID_NEO_4: + case PCIE_DEVICE_ID_NEO_4: + case PCIE_DEVICE_ID_NEO_4RJ45: + case PCIE_DEVICE_ID_NEO_4_IBM: brd->maxports = 4; - else if (pdev->device == PCI_DEVICE_ID_DIGI_NEO_8) + break; + + case PCI_DEVICE_ID_DIGI_NEO_8: + case PCIE_DEVICE_ID_NEO_8: + case PCIE_DEVICE_ID_NEO_8RJ45: brd->maxports = 8; - else - brd->maxports = 2; + break; + + default: + brd->maxports = 1; + break; + } spin_lock_init(&brd->bd_intr_lock); @@ -209,6 +231,14 @@ static struct pci_device_id jsm_pci_tbl[] = { { PCI_DEVICE(PCI_VENDOR_ID_DIGI, PCI_DEVICE_ID_NEO_2RJ45PRI), 0, 0, 3 }, { PCI_DEVICE(PCI_VENDOR_ID_DIGI, PCIE_DEVICE_ID_NEO_4_IBM), 0, 0, 4 }, { PCI_DEVICE(PCI_VENDOR_ID_DIGI, PCI_DEVICE_ID_DIGI_NEO_8), 0, 0, 5 }, + { PCI_DEVICE(PCI_VENDOR_ID_DIGI, PCI_DEVICE_ID_NEO_4), 0, 0, 6 }, + { PCI_DEVICE(PCI_VENDOR_ID_DIGI, PCI_DEVICE_ID_NEO_1_422), 0, 0, 7 }, + { PCI_DEVICE(PCI_VENDOR_ID_DIGI, PCI_DEVICE_ID_NEO_1_422_485), 0, 0, 8 }, + { PCI_DEVICE(PCI_VENDOR_ID_DIGI, PCI_DEVICE_ID_NEO_2_422_485), 0, 0, 9 }, + { PCI_DEVICE(PCI_VENDOR_ID_DIGI, PCIE_DEVICE_ID_NEO_8), 0, 0, 10 }, + { PCI_DEVICE(PCI_VENDOR_ID_DIGI, PCIE_DEVICE_ID_NEO_4), 0, 0, 11 }, + { PCI_DEVICE(PCI_VENDOR_ID_DIGI, PCIE_DEVICE_ID_NEO_4RJ45), 0, 0, 12 }, + { PCI_DEVICE(PCI_VENDOR_ID_DIGI, PCIE_DEVICE_ID_NEO_8RJ45), 0, 0, 13 }, { 0, } }; MODULE_DEVICE_TABLE(pci, jsm_pci_tbl); diff --git a/drivers/tty/serial/kgdb_nmi.c b/drivers/tty/serial/kgdb_nmi.c index 6ec7501b464d..129dc5be6028 100644 --- a/drivers/tty/serial/kgdb_nmi.c +++ b/drivers/tty/serial/kgdb_nmi.c @@ -46,6 +46,8 @@ static atomic_t kgdb_nmi_num_readers = ATOMIC_INIT(0); static int kgdb_nmi_console_setup(struct console *co, char *options) { + arch_kgdb_ops.enable_nmi(1); + /* The NMI console uses the dbg_io_ops to issue console messages. To * avoid duplicate messages during kdb sessions we must inform kdb's * I/O utilities that messages sent to the console will automatically @@ -77,7 +79,7 @@ static struct console kgdb_nmi_console = { .setup = kgdb_nmi_console_setup, .write = kgdb_nmi_console_write, .device = kgdb_nmi_console_device, - .flags = CON_PRINTBUFFER | CON_ANYTIME | CON_ENABLED, + .flags = CON_PRINTBUFFER | CON_ANYTIME, .index = -1, }; @@ -354,7 +356,6 @@ int kgdb_register_nmi_console(void) } register_console(&kgdb_nmi_console); - arch_kgdb_ops.enable_nmi(1); return 0; err_drv_reg: diff --git a/drivers/tty/serial/max310x.c b/drivers/tty/serial/max310x.c index 82573dc4d8cf..0041a64cc86e 100644 --- a/drivers/tty/serial/max310x.c +++ b/drivers/tty/serial/max310x.c @@ -1248,7 +1248,7 @@ static int max310x_probe(struct device *dev, struct max310x_devtype *devtype, mutex_destroy(&s->mutex); #ifdef CONFIG_GPIOLIB - WARN_ON(gpiochip_remove(&s->gpio)); + gpiochip_remove(&s->gpio); out_uart: #endif @@ -1263,12 +1263,10 @@ out_clk: static int max310x_remove(struct device *dev) { struct max310x_port *s = dev_get_drvdata(dev); - int i, ret = 0; + int i; #ifdef CONFIG_GPIOLIB - ret = gpiochip_remove(&s->gpio); - if (ret) - return ret; + gpiochip_remove(&s->gpio); #endif for (i = 0; i < s->uart.nr; i++) { @@ -1282,7 +1280,7 @@ static int max310x_remove(struct device *dev) uart_unregister_driver(&s->uart); clk_disable_unprepare(s->clk); - return ret; + return 0; } static const struct of_device_id __maybe_unused max310x_dt_ids[] = { diff --git a/drivers/tty/serial/meson_uart.c b/drivers/tty/serial/meson_uart.c new file mode 100644 index 000000000000..15c749753317 --- /dev/null +++ b/drivers/tty/serial/meson_uart.c @@ -0,0 +1,634 @@ +/* + * Based on meson_uart.c, by AMLOGIC, INC. + * + * Copyright (C) 2014 Carlo Caione <carlo@caione.org> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include <linux/clk.h> +#include <linux/console.h> +#include <linux/delay.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/serial.h> +#include <linux/serial_core.h> +#include <linux/tty.h> +#include <linux/tty_flip.h> + +/* Register offsets */ +#define AML_UART_WFIFO 0x00 +#define AML_UART_RFIFO 0x04 +#define AML_UART_CONTROL 0x08 +#define AML_UART_STATUS 0x0c +#define AML_UART_MISC 0x10 +#define AML_UART_REG5 0x14 + +/* AML_UART_CONTROL bits */ +#define AML_UART_TX_EN BIT(12) +#define AML_UART_RX_EN BIT(13) +#define AML_UART_TX_RST BIT(22) +#define AML_UART_RX_RST BIT(23) +#define AML_UART_CLR_ERR BIT(24) +#define AML_UART_RX_INT_EN BIT(27) +#define AML_UART_TX_INT_EN BIT(28) +#define AML_UART_DATA_LEN_MASK (0x03 << 20) +#define AML_UART_DATA_LEN_8BIT (0x00 << 20) +#define AML_UART_DATA_LEN_7BIT (0x01 << 20) +#define AML_UART_DATA_LEN_6BIT (0x02 << 20) +#define AML_UART_DATA_LEN_5BIT (0x03 << 20) + +/* AML_UART_STATUS bits */ +#define AML_UART_PARITY_ERR BIT(16) +#define AML_UART_FRAME_ERR BIT(17) +#define AML_UART_TX_FIFO_WERR BIT(18) +#define AML_UART_RX_EMPTY BIT(20) +#define AML_UART_TX_FULL BIT(21) +#define AML_UART_TX_EMPTY BIT(22) +#define AML_UART_ERR (AML_UART_PARITY_ERR | \ + AML_UART_FRAME_ERR | \ + AML_UART_TX_FIFO_WERR) + +/* AML_UART_CONTROL bits */ +#define AML_UART_TWO_WIRE_EN BIT(15) +#define AML_UART_PARITY_TYPE BIT(18) +#define AML_UART_PARITY_EN BIT(19) +#define AML_UART_CLEAR_ERR BIT(24) +#define AML_UART_STOP_BIN_LEN_MASK (0x03 << 16) +#define AML_UART_STOP_BIN_1SB (0x00 << 16) +#define AML_UART_STOP_BIN_2SB (0x01 << 16) + +/* AML_UART_MISC bits */ +#define AML_UART_XMIT_IRQ(c) (((c) & 0xff) << 8) +#define AML_UART_RECV_IRQ(c) ((c) & 0xff) + +/* AML_UART_REG5 bits */ +#define AML_UART_BAUD_MASK 0x7fffff +#define AML_UART_BAUD_USE BIT(23) + +#define AML_UART_PORT_NUM 6 +#define AML_UART_DEV_NAME "ttyAML" + + +static struct uart_driver meson_uart_driver; + +static struct uart_port *meson_ports[AML_UART_PORT_NUM]; + +static void meson_uart_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ +} + +static unsigned int meson_uart_get_mctrl(struct uart_port *port) +{ + return TIOCM_CTS; +} + +static unsigned int meson_uart_tx_empty(struct uart_port *port) +{ + u32 val; + + val = readl(port->membase + AML_UART_STATUS); + return (val & AML_UART_TX_EMPTY) ? TIOCSER_TEMT : 0; +} + +static void meson_uart_stop_tx(struct uart_port *port) +{ + u32 val; + + val = readl(port->membase + AML_UART_CONTROL); + val &= ~AML_UART_TX_EN; + writel(val, port->membase + AML_UART_CONTROL); +} + +static void meson_uart_stop_rx(struct uart_port *port) +{ + u32 val; + + val = readl(port->membase + AML_UART_CONTROL); + val &= ~AML_UART_RX_EN; + writel(val, port->membase + AML_UART_CONTROL); +} + +static void meson_uart_shutdown(struct uart_port *port) +{ + unsigned long flags; + u32 val; + + free_irq(port->irq, port); + + spin_lock_irqsave(&port->lock, flags); + + val = readl(port->membase + AML_UART_CONTROL); + val &= ~(AML_UART_RX_EN | AML_UART_TX_EN); + val &= ~(AML_UART_RX_INT_EN | AML_UART_TX_INT_EN); + writel(val, port->membase + AML_UART_CONTROL); + + spin_unlock_irqrestore(&port->lock, flags); +} + +static void meson_uart_start_tx(struct uart_port *port) +{ + struct circ_buf *xmit = &port->state->xmit; + unsigned int ch; + + if (uart_tx_stopped(port)) { + meson_uart_stop_tx(port); + return; + } + + while (!(readl(port->membase + AML_UART_STATUS) & AML_UART_TX_FULL)) { + if (port->x_char) { + writel(port->x_char, port->membase + AML_UART_WFIFO); + port->icount.tx++; + port->x_char = 0; + continue; + } + + if (uart_circ_empty(xmit)) + break; + + ch = xmit->buf[xmit->tail]; + writel(ch, port->membase + AML_UART_WFIFO); + xmit->tail = (xmit->tail+1) & (SERIAL_XMIT_SIZE - 1); + port->icount.tx++; + } + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(port); +} + +static void meson_receive_chars(struct uart_port *port) +{ + struct tty_port *tport = &port->state->port; + char flag; + u32 status, ch, mode; + + do { + flag = TTY_NORMAL; + port->icount.rx++; + status = readl(port->membase + AML_UART_STATUS); + + if (status & AML_UART_ERR) { + if (status & AML_UART_TX_FIFO_WERR) + port->icount.overrun++; + else if (status & AML_UART_FRAME_ERR) + port->icount.frame++; + else if (status & AML_UART_PARITY_ERR) + port->icount.frame++; + + mode = readl(port->membase + AML_UART_CONTROL); + mode |= AML_UART_CLEAR_ERR; + writel(mode, port->membase + AML_UART_CONTROL); + + /* It doesn't clear to 0 automatically */ + mode &= ~AML_UART_CLEAR_ERR; + writel(mode, port->membase + AML_UART_CONTROL); + + status &= port->read_status_mask; + if (status & AML_UART_FRAME_ERR) + flag = TTY_FRAME; + else if (status & AML_UART_PARITY_ERR) + flag = TTY_PARITY; + } + + ch = readl(port->membase + AML_UART_RFIFO); + ch &= 0xff; + + if ((status & port->ignore_status_mask) == 0) + tty_insert_flip_char(tport, ch, flag); + + if (status & AML_UART_TX_FIFO_WERR) + tty_insert_flip_char(tport, 0, TTY_OVERRUN); + + } while (!(readl(port->membase + AML_UART_STATUS) & AML_UART_RX_EMPTY)); + + spin_unlock(&port->lock); + tty_flip_buffer_push(tport); + spin_lock(&port->lock); +} + +static irqreturn_t meson_uart_interrupt(int irq, void *dev_id) +{ + struct uart_port *port = (struct uart_port *)dev_id; + + spin_lock(&port->lock); + + if (!(readl(port->membase + AML_UART_STATUS) & AML_UART_RX_EMPTY)) + meson_receive_chars(port); + + if (!(readl(port->membase + AML_UART_STATUS) & AML_UART_TX_FULL)) + meson_uart_start_tx(port); + + spin_unlock(&port->lock); + + return IRQ_HANDLED; +} + +static const char *meson_uart_type(struct uart_port *port) +{ + return (port->type == PORT_MESON) ? "meson_uart" : NULL; +} + +static int meson_uart_startup(struct uart_port *port) +{ + u32 val; + int ret = 0; + + val = readl(port->membase + AML_UART_CONTROL); + val |= (AML_UART_RX_RST | AML_UART_TX_RST | AML_UART_CLR_ERR); + writel(val, port->membase + AML_UART_CONTROL); + + val &= ~(AML_UART_RX_RST | AML_UART_TX_RST | AML_UART_CLR_ERR); + writel(val, port->membase + AML_UART_CONTROL); + + val |= (AML_UART_RX_EN | AML_UART_TX_EN); + writel(val, port->membase + AML_UART_CONTROL); + + val |= (AML_UART_RX_INT_EN | AML_UART_TX_INT_EN); + writel(val, port->membase + AML_UART_CONTROL); + + val = (AML_UART_RECV_IRQ(1) | AML_UART_XMIT_IRQ(port->fifosize / 2)); + writel(val, port->membase + AML_UART_MISC); + + ret = request_irq(port->irq, meson_uart_interrupt, 0, + meson_uart_type(port), port); + + return ret; +} + +static void meson_uart_change_speed(struct uart_port *port, unsigned long baud) +{ + u32 val; + + while (!(readl(port->membase + AML_UART_STATUS) & AML_UART_TX_EMPTY)) + cpu_relax(); + + val = readl(port->membase + AML_UART_REG5); + val &= ~AML_UART_BAUD_MASK; + val = ((port->uartclk * 10 / (baud * 4) + 5) / 10) - 1; + val |= AML_UART_BAUD_USE; + writel(val, port->membase + AML_UART_REG5); +} + +static void meson_uart_set_termios(struct uart_port *port, + struct ktermios *termios, + struct ktermios *old) +{ + unsigned int cflags, iflags, baud; + unsigned long flags; + u32 val; + + spin_lock_irqsave(&port->lock, flags); + + cflags = termios->c_cflag; + iflags = termios->c_iflag; + + val = readl(port->membase + AML_UART_CONTROL); + + val &= ~AML_UART_DATA_LEN_MASK; + switch (cflags & CSIZE) { + case CS8: + val |= AML_UART_DATA_LEN_8BIT; + break; + case CS7: + val |= AML_UART_DATA_LEN_7BIT; + break; + case CS6: + val |= AML_UART_DATA_LEN_6BIT; + break; + case CS5: + val |= AML_UART_DATA_LEN_5BIT; + break; + } + + if (cflags & PARENB) + val |= AML_UART_PARITY_EN; + else + val &= ~AML_UART_PARITY_EN; + + if (cflags & PARODD) + val |= AML_UART_PARITY_TYPE; + else + val &= ~AML_UART_PARITY_TYPE; + + val &= ~AML_UART_STOP_BIN_LEN_MASK; + if (cflags & CSTOPB) + val |= AML_UART_STOP_BIN_2SB; + else + val &= ~AML_UART_STOP_BIN_1SB; + + if (cflags & CRTSCTS) + val &= ~AML_UART_TWO_WIRE_EN; + else + val |= AML_UART_TWO_WIRE_EN; + + writel(val, port->membase + AML_UART_CONTROL); + + baud = uart_get_baud_rate(port, termios, old, 9600, 115200); + meson_uart_change_speed(port, baud); + + port->read_status_mask = AML_UART_TX_FIFO_WERR; + if (iflags & INPCK) + port->read_status_mask |= AML_UART_PARITY_ERR | + AML_UART_FRAME_ERR; + + port->ignore_status_mask = 0; + if (iflags & IGNPAR) + port->ignore_status_mask |= AML_UART_PARITY_ERR | + AML_UART_FRAME_ERR; + + uart_update_timeout(port, termios->c_cflag, baud); + spin_unlock_irqrestore(&port->lock, flags); +} + +static int meson_uart_verify_port(struct uart_port *port, + struct serial_struct *ser) +{ + int ret = 0; + + if (port->type != PORT_MESON) + ret = -EINVAL; + if (port->irq != ser->irq) + ret = -EINVAL; + if (ser->baud_base < 9600) + ret = -EINVAL; + return ret; +} + +static void meson_uart_release_port(struct uart_port *port) +{ + if (port->flags & UPF_IOREMAP) { + iounmap(port->membase); + port->membase = NULL; + } +} + +static int meson_uart_request_port(struct uart_port *port) +{ + struct platform_device *pdev = to_platform_device(port->dev); + struct resource *res; + int size; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_err(&pdev->dev, "cannot obtain I/O memory region"); + return -ENODEV; + } + size = resource_size(res); + + if (!devm_request_mem_region(port->dev, port->mapbase, size, + dev_name(port->dev))) { + dev_err(port->dev, "Memory region busy\n"); + return -EBUSY; + } + + if (port->flags & UPF_IOREMAP) { + port->membase = devm_ioremap_nocache(port->dev, + port->mapbase, + size); + if (port->membase == NULL) + return -ENOMEM; + } + + return 0; +} + +static void meson_uart_config_port(struct uart_port *port, int flags) +{ + if (flags & UART_CONFIG_TYPE) { + port->type = PORT_MESON; + meson_uart_request_port(port); + } +} + +static struct uart_ops meson_uart_ops = { + .set_mctrl = meson_uart_set_mctrl, + .get_mctrl = meson_uart_get_mctrl, + .tx_empty = meson_uart_tx_empty, + .start_tx = meson_uart_start_tx, + .stop_tx = meson_uart_stop_tx, + .stop_rx = meson_uart_stop_rx, + .startup = meson_uart_startup, + .shutdown = meson_uart_shutdown, + .set_termios = meson_uart_set_termios, + .type = meson_uart_type, + .config_port = meson_uart_config_port, + .request_port = meson_uart_request_port, + .release_port = meson_uart_release_port, + .verify_port = meson_uart_verify_port, +}; + +#ifdef CONFIG_SERIAL_MESON_CONSOLE + +static void meson_console_putchar(struct uart_port *port, int ch) +{ + if (!port->membase) + return; + + while (readl(port->membase + AML_UART_STATUS) & AML_UART_TX_FULL) + cpu_relax(); + writel(ch, port->membase + AML_UART_WFIFO); +} + +static void meson_serial_console_write(struct console *co, const char *s, + u_int count) +{ + struct uart_port *port; + unsigned long flags; + int locked; + + port = meson_ports[co->index]; + if (!port) + return; + + local_irq_save(flags); + if (port->sysrq) { + locked = 0; + } else if (oops_in_progress) { + locked = spin_trylock(&port->lock); + } else { + spin_lock(&port->lock); + locked = 1; + } + + uart_console_write(port, s, count, meson_console_putchar); + + if (locked) + spin_unlock(&port->lock); + local_irq_restore(flags); +} + +static int meson_serial_console_setup(struct console *co, char *options) +{ + struct uart_port *port; + int baud = 115200; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + + if (co->index < 0 || co->index >= AML_UART_PORT_NUM) + return -EINVAL; + + port = meson_ports[co->index]; + if (!port || !port->membase) + return -ENODEV; + + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + + return uart_set_options(port, co, baud, parity, bits, flow); +} + +static struct console meson_serial_console = { + .name = AML_UART_DEV_NAME, + .write = meson_serial_console_write, + .device = uart_console_device, + .setup = meson_serial_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &meson_uart_driver, +}; + +static int __init meson_serial_console_init(void) +{ + register_console(&meson_serial_console); + return 0; +} +console_initcall(meson_serial_console_init); + +#define MESON_SERIAL_CONSOLE (&meson_serial_console) +#else +#define MESON_SERIAL_CONSOLE NULL +#endif + +static struct uart_driver meson_uart_driver = { + .owner = THIS_MODULE, + .driver_name = "meson_uart", + .dev_name = AML_UART_DEV_NAME, + .nr = AML_UART_PORT_NUM, + .cons = MESON_SERIAL_CONSOLE, +}; + +static int meson_uart_probe(struct platform_device *pdev) +{ + struct resource *res_mem, *res_irq; + struct uart_port *port; + struct clk *clk; + int ret = 0; + + if (pdev->dev.of_node) + pdev->id = of_alias_get_id(pdev->dev.of_node, "serial"); + + if (pdev->id < 0 || pdev->id >= AML_UART_PORT_NUM) + return -EINVAL; + + res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res_mem) + return -ENODEV; + + res_irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0); + if (!res_irq) + return -ENODEV; + + if (meson_ports[pdev->id]) { + dev_err(&pdev->dev, "port %d already allocated\n", pdev->id); + return -EBUSY; + } + + port = devm_kzalloc(&pdev->dev, sizeof(struct uart_port), GFP_KERNEL); + if (!port) + return -ENOMEM; + + clk = clk_get(&pdev->dev, NULL); + if (IS_ERR(clk)) + return PTR_ERR(clk); + + port->uartclk = clk_get_rate(clk); + port->iotype = UPIO_MEM; + port->mapbase = res_mem->start; + port->irq = res_irq->start; + port->flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP | UPF_LOW_LATENCY; + port->dev = &pdev->dev; + port->line = pdev->id; + port->type = PORT_MESON; + port->x_char = 0; + port->ops = &meson_uart_ops; + port->fifosize = 64; + + meson_ports[pdev->id] = port; + platform_set_drvdata(pdev, port); + + ret = uart_add_one_port(&meson_uart_driver, port); + if (ret) + meson_ports[pdev->id] = NULL; + + return ret; +} + +static int meson_uart_remove(struct platform_device *pdev) +{ + struct uart_port *port; + + port = platform_get_drvdata(pdev); + uart_remove_one_port(&meson_uart_driver, port); + meson_ports[pdev->id] = NULL; + + return 0; +} + + +static const struct of_device_id meson_uart_dt_match[] = { + { .compatible = "amlogic,meson-uart" }, + { /* sentinel */ }, +}; +MODULE_DEVICE_TABLE(of, meson_uart_dt_match); + +static struct platform_driver meson_uart_platform_driver = { + .probe = meson_uart_probe, + .remove = meson_uart_remove, + .driver = { + .owner = THIS_MODULE, + .name = "meson_uart", + .of_match_table = meson_uart_dt_match, + }, +}; + +static int __init meson_uart_init(void) +{ + int ret; + + ret = uart_register_driver(&meson_uart_driver); + if (ret) + return ret; + + ret = platform_driver_register(&meson_uart_platform_driver); + if (ret) + uart_unregister_driver(&meson_uart_driver); + + return ret; +} + +static void __exit meson_uart_exit(void) +{ + platform_driver_unregister(&meson_uart_platform_driver); + uart_unregister_driver(&meson_uart_driver); +} + +module_init(meson_uart_init); +module_exit(meson_uart_exit); + +MODULE_AUTHOR("Carlo Caione <carlo@caione.org>"); +MODULE_DESCRIPTION("Amlogic Meson serial port driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/tty/serial/mpc52xx_uart.c b/drivers/tty/serial/mpc52xx_uart.c index 97888f4900ec..a5f4e3648b15 100644 --- a/drivers/tty/serial/mpc52xx_uart.c +++ b/drivers/tty/serial/mpc52xx_uart.c @@ -1087,22 +1087,6 @@ mpc52xx_uart_start_tx(struct uart_port *port) } static void -mpc52xx_uart_send_xchar(struct uart_port *port, char ch) -{ - unsigned long flags; - spin_lock_irqsave(&port->lock, flags); - - port->x_char = ch; - if (ch) { - /* Make sure tx interrupts are on */ - /* Truly necessary ??? They should be anyway */ - psc_ops->start_tx(port); - } - - spin_unlock_irqrestore(&port->lock, flags); -} - -static void mpc52xx_uart_stop_rx(struct uart_port *port) { /* port->lock taken by caller */ @@ -1361,7 +1345,6 @@ static struct uart_ops mpc52xx_uart_ops = { .get_mctrl = mpc52xx_uart_get_mctrl, .stop_tx = mpc52xx_uart_stop_tx, .start_tx = mpc52xx_uart_start_tx, - .send_xchar = mpc52xx_uart_send_xchar, .stop_rx = mpc52xx_uart_stop_rx, .enable_ms = mpc52xx_uart_enable_ms, .break_ctl = mpc52xx_uart_break_ctl, diff --git a/drivers/tty/serial/msm_serial.c b/drivers/tty/serial/msm_serial.c index 0da0b5474e98..4b6c78331a64 100644 --- a/drivers/tty/serial/msm_serial.c +++ b/drivers/tty/serial/msm_serial.c @@ -190,11 +190,10 @@ static void handle_rx(struct uart_port *port) /* Mask conditions we're ignorning. */ sr &= port->read_status_mask; - if (sr & UART_SR_RX_BREAK) { + if (sr & UART_SR_RX_BREAK) flag = TTY_BREAK; - } else if (sr & UART_SR_PAR_FRAME_ERR) { + else if (sr & UART_SR_PAR_FRAME_ERR) flag = TTY_FRAME; - } if (!uart_handle_sysrq_char(port, c)) tty_insert_flip_char(tport, c, flag); @@ -315,7 +314,6 @@ static unsigned int msm_get_mctrl(struct uart_port *port) return TIOCM_CAR | TIOCM_CTS | TIOCM_DSR | TIOCM_RTS; } - static void msm_reset(struct uart_port *port) { struct msm_port *msm_port = UART_TO_MSM(port); @@ -336,6 +334,7 @@ static void msm_reset(struct uart_port *port) static void msm_set_mctrl(struct uart_port *port, unsigned int mctrl) { unsigned int mr; + mr = msm_read(port, UART_MR1); if (!(mctrl & TIOCM_RTS)) { @@ -431,7 +430,6 @@ static int msm_set_baud_rate(struct uart_port *port, unsigned int baud) return baud; } - static void msm_init_clock(struct uart_port *port) { struct msm_port *msm_port = UART_TO_MSM(port); @@ -646,6 +644,7 @@ fail_release_port: static void msm_config_port(struct uart_port *port, int flags) { int ret; + if (flags & UART_CONFIG_TYPE) { port->type = PORT_MSM; ret = msm_request_port(port); @@ -678,22 +677,11 @@ static void msm_power(struct uart_port *port, unsigned int state, clk_disable_unprepare(msm_port->pclk); break; default: - printk(KERN_ERR "msm_serial: Unknown PM state %d\n", state); + pr_err("msm_serial: Unknown PM state %d\n", state); } } #ifdef CONFIG_CONSOLE_POLL -static int msm_poll_init(struct uart_port *port) -{ - struct msm_port *msm_port = UART_TO_MSM(port); - - /* Enable single character mode on RX FIFO */ - if (msm_port->is_uartdm >= UARTDM_1P4) - msm_write(port, UARTDM_DMEN_RX_SC_ENABLE, UARTDM_DMEN); - - return 0; -} - static int msm_poll_get_char_single(struct uart_port *port) { struct msm_port *msm_port = UART_TO_MSM(port); @@ -701,11 +689,11 @@ static int msm_poll_get_char_single(struct uart_port *port) if (!(msm_read(port, UART_SR) & UART_SR_RX_READY)) return NO_POLL_CHAR; - else - return msm_read(port, rf_reg) & 0xff; + + return msm_read(port, rf_reg) & 0xff; } -static int msm_poll_get_char_dm_1p3(struct uart_port *port) +static int msm_poll_get_char_dm(struct uart_port *port) { int c; static u32 slop; @@ -729,6 +717,10 @@ static int msm_poll_get_char_dm_1p3(struct uart_port *port) slop = msm_read(port, UARTDM_RF); c = sp[0]; count--; + msm_write(port, UART_CR_CMD_RESET_STALE_INT, UART_CR); + msm_write(port, 0xFFFFFF, UARTDM_DMRX); + msm_write(port, UART_CR_CMD_STALE_EVENT_ENABLE, + UART_CR); } else { c = NO_POLL_CHAR; } @@ -752,8 +744,8 @@ static int msm_poll_get_char(struct uart_port *port) imr = msm_read(port, UART_IMR); msm_write(port, 0, UART_IMR); - if (msm_port->is_uartdm == UARTDM_1P3) - c = msm_poll_get_char_dm_1p3(port); + if (msm_port->is_uartdm) + c = msm_poll_get_char_dm(port); else c = msm_poll_get_char_single(port); @@ -788,8 +780,6 @@ static void msm_poll_put_char(struct uart_port *port, unsigned char c) /* Enable interrupts */ msm_write(port, imr, UART_IMR); - - return; } #endif @@ -812,7 +802,6 @@ static struct uart_ops msm_uart_pops = { .verify_port = msm_verify_port, .pm = msm_power, #ifdef CONFIG_CONSOLE_POLL - .poll_init = msm_poll_init, .poll_get_char = msm_poll_get_char, .poll_put_char = msm_poll_put_char, #endif @@ -856,22 +845,15 @@ static inline struct uart_port *get_port_from_line(unsigned int line) } #ifdef CONFIG_SERIAL_MSM_CONSOLE -static void msm_console_write(struct console *co, const char *s, - unsigned int count) +static void __msm_console_write(struct uart_port *port, const char *s, + unsigned int count, bool is_uartdm) { int i; - struct uart_port *port; - struct msm_port *msm_port; int num_newlines = 0; bool replaced = false; void __iomem *tf; - BUG_ON(co->index < 0 || co->index >= UART_NR); - - port = get_port_from_line(co->index); - msm_port = UART_TO_MSM(port); - - if (msm_port->is_uartdm) + if (is_uartdm) tf = port->membase + UARTDM_TF; else tf = port->membase + UART_TF; @@ -883,7 +865,7 @@ static void msm_console_write(struct console *co, const char *s, count += num_newlines; spin_lock(&port->lock); - if (msm_port->is_uartdm) + if (is_uartdm) reset_dm_count(port, count); i = 0; @@ -892,7 +874,7 @@ static void msm_console_write(struct console *co, const char *s, unsigned int num_chars; char buf[4] = { 0 }; - if (msm_port->is_uartdm) + if (is_uartdm) num_chars = min(count - i, (unsigned int)sizeof(buf)); else num_chars = 1; @@ -921,6 +903,20 @@ static void msm_console_write(struct console *co, const char *s, spin_unlock(&port->lock); } +static void msm_console_write(struct console *co, const char *s, + unsigned int count) +{ + struct uart_port *port; + struct msm_port *msm_port; + + BUG_ON(co->index < 0 || co->index >= UART_NR); + + port = get_port_from_line(co->index); + msm_port = UART_TO_MSM(port); + + __msm_console_write(port, s, count, msm_port->is_uartdm); +} + static int __init msm_console_setup(struct console *co, char *options) { struct uart_port *port; @@ -958,11 +954,54 @@ static int __init msm_console_setup(struct console *co, char *options) msm_write(port, UART_CR_TX_ENABLE, UART_CR); } - printk(KERN_INFO "msm_serial: console setup on port #%d\n", port->line); + pr_info("msm_serial: console setup on port #%d\n", port->line); return uart_set_options(port, co, baud, parity, bits, flow); } +static void +msm_serial_early_write(struct console *con, const char *s, unsigned n) +{ + struct earlycon_device *dev = con->data; + + __msm_console_write(&dev->port, s, n, false); +} + +static int __init +msm_serial_early_console_setup(struct earlycon_device *device, const char *opt) +{ + if (!device->port.membase) + return -ENODEV; + + device->con->write = msm_serial_early_write; + return 0; +} +EARLYCON_DECLARE(msm_serial, msm_serial_early_console_setup); +OF_EARLYCON_DECLARE(msm_serial, "qcom,msm-uart", + msm_serial_early_console_setup); + +static void +msm_serial_early_write_dm(struct console *con, const char *s, unsigned n) +{ + struct earlycon_device *dev = con->data; + + __msm_console_write(&dev->port, s, n, true); +} + +static int __init +msm_serial_early_console_setup_dm(struct earlycon_device *device, + const char *opt) +{ + if (!device->port.membase) + return -ENODEV; + + device->con->write = msm_serial_early_write_dm; + return 0; +} +EARLYCON_DECLARE(msm_serial_dm, msm_serial_early_console_setup_dm); +OF_EARLYCON_DECLARE(msm_serial_dm, "qcom,msm-uartdm", + msm_serial_early_console_setup_dm); + static struct uart_driver msm_uart_driver; static struct console msm_console = { @@ -1013,7 +1052,7 @@ static int msm_serial_probe(struct platform_device *pdev) if (unlikely(pdev->id < 0 || pdev->id >= UART_NR)) return -ENXIO; - printk(KERN_INFO "msm_serial: detected port #%d\n", pdev->id); + dev_info(&pdev->dev, "msm_serial: detected port #%d\n", pdev->id); port = get_port_from_line(pdev->id); port->dev = &pdev->dev; @@ -1038,8 +1077,7 @@ static int msm_serial_probe(struct platform_device *pdev) } port->uartclk = clk_get_rate(msm_port->clk); - printk(KERN_INFO "uartclk = %d\n", port->uartclk); - + dev_info(&pdev->dev, "uartclk = %d\n", port->uartclk); resource = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (unlikely(!resource)) @@ -1093,7 +1131,7 @@ static int __init msm_serial_init(void) if (unlikely(ret)) uart_unregister_driver(&msm_uart_driver); - printk(KERN_INFO "msm_serial: driver initialized\n"); + pr_info("msm_serial: driver initialized\n"); return ret; } diff --git a/drivers/tty/serial/mxs-auart.c b/drivers/tty/serial/mxs-auart.c index b5c329248c81..10c29334fe2f 100644 --- a/drivers/tty/serial/mxs-auart.c +++ b/drivers/tty/serial/mxs-auart.c @@ -408,7 +408,7 @@ static void mxs_auart_set_mctrl(struct uart_port *u, unsigned mctrl) ctrl &= ~(AUART_CTRL2_RTSEN | AUART_CTRL2_RTS); if (mctrl & TIOCM_RTS) { - if (tty_port_cts_enabled(&u->state->port)) + if (uart_cts_enabled(u)) ctrl |= AUART_CTRL2_RTSEN; else ctrl |= AUART_CTRL2_RTS; diff --git a/drivers/tty/serial/nwpserial.c b/drivers/tty/serial/nwpserial.c index c06366b6bc29..5da7622e88c3 100644 --- a/drivers/tty/serial/nwpserial.c +++ b/drivers/tty/serial/nwpserial.c @@ -22,6 +22,7 @@ #include <linux/of_platform.h> #include <linux/of_device.h> #include <linux/nwpserial.h> +#include <linux/delay.h> #include <asm/prom.h> #include <asm/dcr.h> diff --git a/drivers/tty/serial/of_serial.c b/drivers/tty/serial/of_serial.c index 68d4455f3cf9..8bc2563335ae 100644 --- a/drivers/tty/serial/of_serial.c +++ b/drivers/tty/serial/of_serial.c @@ -183,10 +183,6 @@ static int of_platform_serial_probe(struct platform_device *ofdev) "auto-flow-control")) port8250.capabilities |= UART_CAP_AFE; - if (of_property_read_bool(ofdev->dev.of_node, - "has-hw-flow-control")) - port8250.port.flags |= UPF_HARD_FLOW; - ret = serial8250_register_8250_port(&port8250); break; } @@ -244,6 +240,32 @@ static int of_platform_serial_remove(struct platform_device *ofdev) return 0; } +#ifdef CONFIG_PM_SLEEP +static int of_serial_suspend(struct device *dev) +{ + struct of_serial_info *info = dev_get_drvdata(dev); + + serial8250_suspend_port(info->line); + if (info->clk) + clk_disable_unprepare(info->clk); + + return 0; +} + +static int of_serial_resume(struct device *dev) +{ + struct of_serial_info *info = dev_get_drvdata(dev); + + if (info->clk) + clk_prepare_enable(info->clk); + + serial8250_resume_port(info->line); + + return 0; +} +#endif +static SIMPLE_DEV_PM_OPS(of_serial_pm_ops, of_serial_suspend, of_serial_resume); + /* * A few common types, add more as needed. */ @@ -275,6 +297,7 @@ static struct platform_driver of_platform_serial_driver = { .name = "of_serial", .owner = THIS_MODULE, .of_match_table = of_platform_serial_table, + .pm = &of_serial_pm_ops, }, .probe = of_platform_serial_probe, .remove = of_platform_serial_remove, diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c index d017cec8a34a..18c30cabe27f 100644 --- a/drivers/tty/serial/omap-serial.c +++ b/drivers/tty/serial/omap-serial.c @@ -239,6 +239,26 @@ static void serial_omap_enable_wakeup(struct uart_omap_port *up, bool enable) } /* + * Calculate the absolute difference between the desired and actual baud + * rate for the given mode. + */ +static inline int calculate_baud_abs_diff(struct uart_port *port, + unsigned int baud, unsigned int mode) +{ + unsigned int n = port->uartclk / (mode * baud); + int abs_diff; + + if (n == 0) + n = 1; + + abs_diff = baud - (port->uartclk / (mode * n)); + if (abs_diff < 0) + abs_diff = -abs_diff; + + return abs_diff; +} + +/* * serial_omap_baud_is_mode16 - check if baud rate is MODE16X * @port: uart port info * @baud: baudrate for which mode needs to be determined @@ -252,16 +272,10 @@ static void serial_omap_enable_wakeup(struct uart_omap_port *up, bool enable) static bool serial_omap_baud_is_mode16(struct uart_port *port, unsigned int baud) { - unsigned int n13 = port->uartclk / (13 * baud); - unsigned int n16 = port->uartclk / (16 * baud); - int baudAbsDiff13 = baud - (port->uartclk / (13 * n13)); - int baudAbsDiff16 = baud - (port->uartclk / (16 * n16)); - if (baudAbsDiff13 < 0) - baudAbsDiff13 = -baudAbsDiff13; - if (baudAbsDiff16 < 0) - baudAbsDiff16 = -baudAbsDiff16; - - return (baudAbsDiff13 >= baudAbsDiff16); + int abs_diff_13 = calculate_baud_abs_diff(port, baud, 13); + int abs_diff_16 = calculate_baud_abs_diff(port, baud, 16); + + return (abs_diff_13 >= abs_diff_16); } /* diff --git a/drivers/tty/serial/sc16is7xx.c b/drivers/tty/serial/sc16is7xx.c index 3284c31085a7..6246820d7f05 100644 --- a/drivers/tty/serial/sc16is7xx.c +++ b/drivers/tty/serial/sc16is7xx.c @@ -1157,7 +1157,7 @@ static int sc16is7xx_probe(struct device *dev, #ifdef CONFIG_GPIOLIB if (devtype->nr_gpio) - WARN_ON(gpiochip_remove(&s->gpio)); + gpiochip_remove(&s->gpio); out_uart: #endif @@ -1173,14 +1173,11 @@ out_clk: static int sc16is7xx_remove(struct device *dev) { struct sc16is7xx_port *s = dev_get_drvdata(dev); - int i, ret = 0; + int i; #ifdef CONFIG_GPIOLIB - if (s->devtype->nr_gpio) { - ret = gpiochip_remove(&s->gpio); - if (ret) - return ret; - } + if (s->devtype->nr_gpio) + gpiochip_remove(&s->gpio); #endif for (i = 0; i < s->uart.nr; i++) { @@ -1195,7 +1192,7 @@ static int sc16is7xx_remove(struct device *dev) if (!IS_ERR(s->clk)) clk_disable_unprepare(s->clk); - return ret; + return 0; } static const struct of_device_id __maybe_unused sc16is7xx_dt_ids[] = { diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c index 29a7be47389a..df3a8c74358e 100644 --- a/drivers/tty/serial/serial_core.c +++ b/drivers/tty/serial/serial_core.c @@ -59,6 +59,11 @@ static void uart_change_pm(struct uart_state *state, static void uart_port_shutdown(struct tty_port *port); +static int uart_dcd_enabled(struct uart_port *uport) +{ + return uport->status & UPSTAT_DCD_ENABLE; +} + /* * This routine is used by the interrupt handler to schedule processing in * the software interrupt portion of the driver. @@ -90,7 +95,7 @@ static void __uart_start(struct tty_struct *tty) struct uart_state *state = tty->driver_data; struct uart_port *port = state->uart_port; - if (!tty->stopped && !tty->hw_stopped) + if (!uart_tx_stopped(port)) port->ops->start_tx(port); } @@ -130,7 +135,6 @@ static int uart_port_startup(struct tty_struct *tty, struct uart_state *state, int init_hw) { struct uart_port *uport = state->uart_port; - struct tty_port *port = &state->port; unsigned long page; int retval = 0; @@ -175,17 +179,14 @@ static int uart_port_startup(struct tty_struct *tty, struct uart_state *state, if (tty->termios.c_cflag & CBAUD) uart_set_mctrl(uport, TIOCM_RTS | TIOCM_DTR); } - /* - * if hw support flow control without software intervention, - * then skip the below check - */ - if (tty_port_cts_enabled(port) && - !(uport->flags & UPF_HARD_FLOW)) { - spin_lock_irq(&uport->lock); - if (!(uport->ops->get_mctrl(uport) & TIOCM_CTS)) - tty->hw_stopped = 1; - spin_unlock_irq(&uport->lock); - } + + spin_lock_irq(&uport->lock); + if (uart_cts_enabled(uport) && + !(uport->ops->get_mctrl(uport) & TIOCM_CTS)) + uport->hw_stopped = 1; + else + uport->hw_stopped = 0; + spin_unlock_irq(&uport->lock); } /* @@ -439,7 +440,6 @@ EXPORT_SYMBOL(uart_get_divisor); static void uart_change_speed(struct tty_struct *tty, struct uart_state *state, struct ktermios *old_termios) { - struct tty_port *port = &state->port; struct uart_port *uport = state->uart_port; struct ktermios *termios; @@ -454,17 +454,19 @@ static void uart_change_speed(struct tty_struct *tty, struct uart_state *state, uport->ops->set_termios(uport, termios, old_termios); /* - * Set flags based on termios cflag + * Set modem status enables based on termios cflag */ + spin_lock_irq(&uport->lock); if (termios->c_cflag & CRTSCTS) - set_bit(ASYNCB_CTS_FLOW, &port->flags); + uport->status |= UPSTAT_CTS_ENABLE; else - clear_bit(ASYNCB_CTS_FLOW, &port->flags); + uport->status &= ~UPSTAT_CTS_ENABLE; if (termios->c_cflag & CLOCAL) - clear_bit(ASYNCB_CHECK_CD, &port->flags); + uport->status &= ~UPSTAT_DCD_ENABLE; else - set_bit(ASYNCB_CHECK_CD, &port->flags); + uport->status |= UPSTAT_DCD_ENABLE; + spin_unlock_irq(&uport->lock); } static inline int __uart_put_char(struct uart_port *port, @@ -604,12 +606,11 @@ static void uart_send_xchar(struct tty_struct *tty, char ch) if (port->ops->send_xchar) port->ops->send_xchar(port, ch); else { + spin_lock_irqsave(&port->lock, flags); port->x_char = ch; - if (ch) { - spin_lock_irqsave(&port->lock, flags); + if (ch) port->ops->start_tx(port); - spin_unlock_irqrestore(&port->lock, flags); - } + spin_unlock_irqrestore(&port->lock, flags); } } @@ -652,12 +653,8 @@ static void uart_unthrottle(struct tty_struct *tty) mask &= ~port->flags; } - if (mask & UPF_SOFT_FLOW) { - if (port->x_char) - port->x_char = 0; - else - uart_send_xchar(tty, START_CHAR(tty)); - } + if (mask & UPF_SOFT_FLOW) + uart_send_xchar(tty, START_CHAR(tty)); if (mask & UPF_HARD_FLOW) uart_set_mctrl(port, TIOCM_RTS); @@ -892,10 +889,11 @@ static int uart_set_info(struct tty_struct *tty, struct tty_port *port, */ if (uport->flags & UPF_SPD_MASK) { char buf[64]; - printk(KERN_NOTICE - "%s sets custom speed on %s. This " - "is deprecated.\n", current->comm, - tty_name(port->tty, buf)); + + dev_notice(uport->dev, + "%s sets custom speed on %s. This is deprecated.\n", + current->comm, + tty_name(port->tty, buf)); } uart_change_speed(tty, state, NULL); } @@ -952,7 +950,7 @@ static int uart_get_lsr_info(struct tty_struct *tty, */ if (uport->x_char || ((uart_circ_chars_pending(&state->xmit) > 0) && - !tty->stopped && !tty->hw_stopped)) + !uart_tx_stopped(uport))) result &= ~TIOCSER_TEMT; return put_user(result, value); @@ -1251,7 +1249,6 @@ static void uart_set_termios(struct tty_struct *tty, { struct uart_state *state = tty->driver_data; struct uart_port *uport = state->uart_port; - unsigned long flags; unsigned int cflag = tty->termios.c_cflag; unsigned int iflag_mask = IGNBRK|BRKINT|IGNPAR|PARMRK|INPCK; bool sw_changed = false; @@ -1291,34 +1288,33 @@ static void uart_set_termios(struct tty_struct *tty, /* Handle transition away from B0 status */ else if (!(old_termios->c_cflag & CBAUD) && (cflag & CBAUD)) { unsigned int mask = TIOCM_DTR; - if (!(cflag & CRTSCTS) || - !test_bit(TTY_THROTTLED, &tty->flags)) + if (!(cflag & CRTSCTS) || !test_bit(TTY_THROTTLED, &tty->flags)) mask |= TIOCM_RTS; uart_set_mctrl(uport, mask); } /* * If the port is doing h/w assisted flow control, do nothing. - * We assume that tty->hw_stopped has never been set. + * We assume that port->hw_stopped has never been set. */ if (uport->flags & UPF_HARD_FLOW) return; /* Handle turning off CRTSCTS */ if ((old_termios->c_cflag & CRTSCTS) && !(cflag & CRTSCTS)) { - spin_lock_irqsave(&uport->lock, flags); - tty->hw_stopped = 0; + spin_lock_irq(&uport->lock); + uport->hw_stopped = 0; __uart_start(tty); - spin_unlock_irqrestore(&uport->lock, flags); + spin_unlock_irq(&uport->lock); } /* Handle turning on CRTSCTS */ else if (!(old_termios->c_cflag & CRTSCTS) && (cflag & CRTSCTS)) { - spin_lock_irqsave(&uport->lock, flags); + spin_lock_irq(&uport->lock); if (!(uport->ops->get_mctrl(uport) & TIOCM_CTS)) { - tty->hw_stopped = 1; + uport->hw_stopped = 1; uport->ops->stop_tx(uport); } - spin_unlock_irqrestore(&uport->lock, flags); + spin_unlock_irq(&uport->lock); } } @@ -1975,12 +1971,9 @@ int uart_suspend_port(struct uart_driver *drv, struct uart_port *uport) for (tries = 3; !ops->tx_empty(uport) && tries; tries--) msleep(10); if (!tries) - printk(KERN_ERR "%s%s%s%d: Unable to drain " - "transmitter\n", - uport->dev ? dev_name(uport->dev) : "", - uport->dev ? ": " : "", - drv->dev_name, - drv->tty_driver->name_base + uport->line); + dev_err(uport->dev, "%s%d: Unable to drain transmitter\n", + drv->dev_name, + drv->tty_driver->name_base + uport->line); if (console_suspend_enabled || !uart_console(uport)) ops->shutdown(uport); @@ -2109,9 +2102,7 @@ uart_report_port(struct uart_driver *drv, struct uart_port *port) break; } - printk(KERN_INFO "%s%s%s%d at %s (irq = %d, base_baud = %d) is a %s\n", - port->dev ? dev_name(port->dev) : "", - port->dev ? ": " : "", + dev_info(port->dev, "%s%d at %s (irq = %d, base_baud = %d) is a %s\n", drv->dev_name, drv->tty_driver->name_base + port->line, address, port->irq, port->uartclk / 16, uart_type(port)); @@ -2640,7 +2631,7 @@ int uart_add_one_port(struct uart_driver *drv, struct uart_port *uport) if (likely(!IS_ERR(tty_dev))) { device_set_wakeup_capable(tty_dev, 1); } else { - printk(KERN_ERR "Cannot register tty device on line %d\n", + dev_err(uport->dev, "Cannot register tty device on line %d\n", uport->line); } @@ -2675,7 +2666,7 @@ int uart_remove_one_port(struct uart_driver *drv, struct uart_port *uport) BUG_ON(in_interrupt()); if (state->uart_port != uport) - printk(KERN_ALERT "Removing wrong port: %p != %p\n", + dev_alert(uport->dev, "Removing wrong port: %p != %p\n", state->uart_port, uport); mutex_lock(&port_mutex); @@ -2757,22 +2748,29 @@ EXPORT_SYMBOL(uart_match_port); * uart_handle_dcd_change - handle a change of carrier detect state * @uport: uart_port structure for the open port * @status: new carrier detect status, nonzero if active + * + * Caller must hold uport->lock */ void uart_handle_dcd_change(struct uart_port *uport, unsigned int status) { struct tty_port *port = &uport->state->port; struct tty_struct *tty = port->tty; - struct tty_ldisc *ld = tty ? tty_ldisc_ref(tty) : NULL; + struct tty_ldisc *ld; - if (ld) { - if (ld->ops->dcd_change) - ld->ops->dcd_change(tty, status); - tty_ldisc_deref(ld); + lockdep_assert_held_once(&uport->lock); + + if (tty) { + ld = tty_ldisc_ref(tty); + if (ld) { + if (ld->ops->dcd_change) + ld->ops->dcd_change(tty, status); + tty_ldisc_deref(ld); + } } uport->icount.dcd++; - if (port->flags & ASYNC_CHECK_CD) { + if (uart_dcd_enabled(uport)) { if (status) wake_up_interruptible(&port->open_wait); else if (tty) @@ -2785,26 +2783,25 @@ EXPORT_SYMBOL_GPL(uart_handle_dcd_change); * uart_handle_cts_change - handle a change of clear-to-send state * @uport: uart_port structure for the open port * @status: new clear to send status, nonzero if active + * + * Caller must hold uport->lock */ void uart_handle_cts_change(struct uart_port *uport, unsigned int status) { - struct tty_port *port = &uport->state->port; - struct tty_struct *tty = port->tty; + lockdep_assert_held_once(&uport->lock); uport->icount.cts++; - /* skip below code if the hw flow control is supported */ - if (tty_port_cts_enabled(port) && - !(uport->flags & UPF_HARD_FLOW)) { - if (tty->hw_stopped) { + if (uart_cts_enabled(uport)) { + if (uport->hw_stopped) { if (status) { - tty->hw_stopped = 0; + uport->hw_stopped = 0; uport->ops->start_tx(uport); uart_write_wakeup(uport); } } else { if (!status) { - tty->hw_stopped = 1; + uport->hw_stopped = 1; uport->ops->stop_tx(uport); } } diff --git a/drivers/tty/serial/serial_mctrl_gpio.c b/drivers/tty/serial/serial_mctrl_gpio.c index bf9560ffe3f4..a3035f997b98 100644 --- a/drivers/tty/serial/serial_mctrl_gpio.c +++ b/drivers/tty/serial/serial_mctrl_gpio.c @@ -18,7 +18,7 @@ #include <linux/err.h> #include <linux/device.h> #include <linux/gpio/consumer.h> -#include <uapi/asm-generic/termios.h> +#include <linux/termios.h> #include "serial_mctrl_gpio.h" diff --git a/drivers/tty/serial/st-asc.c b/drivers/tty/serial/st-asc.c index 8b2d7356611d..a3165842ca29 100644 --- a/drivers/tty/serial/st-asc.c +++ b/drivers/tty/serial/st-asc.c @@ -151,12 +151,20 @@ static inline struct asc_port *to_asc_port(struct uart_port *port) static inline u32 asc_in(struct uart_port *port, u32 offset) { +#ifdef readl_relaxed + return readl_relaxed(port->membase + offset); +#else return readl(port->membase + offset); +#endif } static inline void asc_out(struct uart_port *port, u32 offset, u32 value) { +#ifdef writel_relaxed + writel_relaxed(value, port->membase + offset); +#else writel(value, port->membase + offset); +#endif } /* diff --git a/drivers/tty/serial/sunhv.c b/drivers/tty/serial/sunhv.c index 20521db2189f..25d43ce8b318 100644 --- a/drivers/tty/serial/sunhv.c +++ b/drivers/tty/serial/sunhv.c @@ -268,6 +268,9 @@ static void sunhv_send_xchar(struct uart_port *port, char ch) unsigned long flags; int limit = 10000; + if (ch == __DISABLED_CHAR) + return; + spin_lock_irqsave(&port->lock, flags); while (limit-- > 0) { diff --git a/drivers/tty/serial/sunsab.c b/drivers/tty/serial/sunsab.c index b9598b227a45..b339fe4811cd 100644 --- a/drivers/tty/serial/sunsab.c +++ b/drivers/tty/serial/sunsab.c @@ -436,7 +436,7 @@ static void sunsab_start_tx(struct uart_port *port) struct circ_buf *xmit = &up->port.state->xmit; int i; - if (uart_circ_empty(xmit)) + if (uart_circ_empty(xmit) || uart_tx_stopped(port)) return; up->interrupt_mask1 &= ~(SAB82532_IMR1_ALLS|SAB82532_IMR1_XPR); @@ -468,6 +468,9 @@ static void sunsab_send_xchar(struct uart_port *port, char ch) struct uart_sunsab_port *up = (struct uart_sunsab_port *) port; unsigned long flags; + if (ch == __DISABLED_CHAR) + return; + spin_lock_irqsave(&up->port.lock, flags); sunsab_tec_wait(up); diff --git a/drivers/tty/serial/uartlite.c b/drivers/tty/serial/uartlite.c index 9fc22f40796e..189f52e3111f 100644 --- a/drivers/tty/serial/uartlite.c +++ b/drivers/tty/serial/uartlite.c @@ -665,7 +665,6 @@ static struct platform_driver ulite_platform_driver = { .probe = ulite_probe, .remove = ulite_remove, .driver = { - .owner = THIS_MODULE, .name = "uartlite", .of_match_table = of_match_ptr(ulite_of_match), }, diff --git a/drivers/tty/serial/vr41xx_siu.c b/drivers/tty/serial/vr41xx_siu.c index db0c8a4ab03e..d7f9d622cdcb 100644 --- a/drivers/tty/serial/vr41xx_siu.c +++ b/drivers/tty/serial/vr41xx_siu.c @@ -847,7 +847,6 @@ void __init vr41xx_siu_early_setup(struct uart_port *port) siu_uart_ports[port->line].type = port->type; siu_uart_ports[port->line].uartclk = SIU_BAUD_BASE * 16; siu_uart_ports[port->line].mapbase = port->mapbase; - siu_uart_ports[port->line].mapbase = port->mapbase; siu_uart_ports[port->line].ops = &siu_uart_ops; } diff --git a/drivers/tty/serial/vt8500_serial.c b/drivers/tty/serial/vt8500_serial.c index 15ad6fcda88b..b2bc9e8ba048 100644 --- a/drivers/tty/serial/vt8500_serial.c +++ b/drivers/tty/serial/vt8500_serial.c @@ -33,8 +33,8 @@ #include <linux/serial.h> #include <linux/slab.h> #include <linux/clk.h> -#include <linux/platform_device.h> #include <linux/of.h> +#include <linux/of_device.h> #include <linux/err.h> /* @@ -78,13 +78,40 @@ #define RX_FIFO_INTS (RXFAF | RXFF | RXOVER | PER | FER | RXTOUT) #define TX_FIFO_INTS (TXFAE | TXFE | TXUDR) +/* + * Line control bits + */ + +#define VT8500_TXEN (1 << 0) /* Enable transmit logic */ +#define VT8500_RXEN (1 << 1) /* Enable receive logic */ +#define VT8500_CS8 (1 << 2) /* 8-bit data length (vs. 7-bit) */ +#define VT8500_CSTOPB (1 << 3) /* 2 stop bits (vs. 1) */ +#define VT8500_PARENB (1 << 4) /* Enable parity */ +#define VT8500_PARODD (1 << 5) /* Odd parity (vs. even) */ +#define VT8500_RTS (1 << 6) /* Ready to send */ +#define VT8500_LOOPBK (1 << 7) /* Enable internal loopback */ +#define VT8500_DMA (1 << 8) /* Enable DMA mode (needs FIFO) */ +#define VT8500_BREAK (1 << 9) /* Initiate break signal */ +#define VT8500_PSLVERR (1 << 10) /* APB error upon empty RX FIFO read */ +#define VT8500_SWRTSCTS (1 << 11) /* Software-controlled RTS/CTS */ + +/* + * Capability flags (driver-internal) + */ + +#define VT8500_HAS_SWRTSCTS_SWITCH (1 << 1) + +#define VT8500_RECOMMENDED_CLK 12000000 +#define VT8500_OVERSAMPLING_DIVISOR 13 #define VT8500_MAX_PORTS 6 struct vt8500_port { struct uart_port uart; char name[16]; struct clk *clk; + unsigned int clk_predivisor; unsigned int ier; + unsigned int vt8500_uart_flags; }; /* @@ -267,31 +294,45 @@ static unsigned int vt8500_get_mctrl(struct uart_port *port) static void vt8500_set_mctrl(struct uart_port *port, unsigned int mctrl) { + unsigned int lcr = vt8500_read(port, VT8500_URLCR); + + if (mctrl & TIOCM_RTS) + lcr |= VT8500_RTS; + else + lcr &= ~VT8500_RTS; + + vt8500_write(port, lcr, VT8500_URLCR); } static void vt8500_break_ctl(struct uart_port *port, int break_ctl) { if (break_ctl) - vt8500_write(port, vt8500_read(port, VT8500_URLCR) | (1 << 9), + vt8500_write(port, + vt8500_read(port, VT8500_URLCR) | VT8500_BREAK, VT8500_URLCR); } static int vt8500_set_baud_rate(struct uart_port *port, unsigned int baud) { + struct vt8500_port *vt8500_port = + container_of(port, struct vt8500_port, uart); unsigned long div; unsigned int loops = 1000; - div = vt8500_read(port, VT8500_URDIV) & ~(0x3ff); + div = ((vt8500_port->clk_predivisor - 1) & 0xf) << 16; + div |= (uart_get_divisor(port, baud) - 1) & 0x3ff; - if (unlikely((baud < 900) || (baud > 921600))) - div |= 7; - else - div |= (921600 / baud) - 1; + /* Effective baud rate */ + baud = port->uartclk / 16 / ((div & 0x3ff) + 1); while ((vt8500_read(port, VT8500_URUSR) & (1 << 5)) && --loops) cpu_relax(); + vt8500_write(port, div, VT8500_URDIV); + /* Break signal timing depends on baud rate, update accordingly */ + vt8500_write(port, mult_frac(baud, 4096, 1000000), VT8500_URBKR); + return baud; } @@ -347,31 +388,35 @@ static void vt8500_set_termios(struct uart_port *port, /* calculate parity */ lcr = vt8500_read(&vt8500_port->uart, VT8500_URLCR); - lcr &= ~((1 << 5) | (1 << 4)); + lcr &= ~(VT8500_PARENB | VT8500_PARODD); if (termios->c_cflag & PARENB) { - lcr |= (1 << 4); + lcr |= VT8500_PARENB; termios->c_cflag &= ~CMSPAR; if (termios->c_cflag & PARODD) - lcr |= (1 << 5); + lcr |= VT8500_PARODD; } /* calculate bits per char */ - lcr &= ~(1 << 2); + lcr &= ~VT8500_CS8; switch (termios->c_cflag & CSIZE) { case CS7: break; case CS8: default: - lcr |= (1 << 2); + lcr |= VT8500_CS8; termios->c_cflag &= ~CSIZE; termios->c_cflag |= CS8; break; } /* calculate stop bits */ - lcr &= ~(1 << 3); + lcr &= ~VT8500_CSTOPB; if (termios->c_cflag & CSTOPB) - lcr |= (1 << 3); + lcr |= VT8500_CSTOPB; + + lcr &= ~VT8500_SWRTSCTS; + if (vt8500_port->vt8500_uart_flags & VT8500_HAS_SWRTSCTS_SWITCH) + lcr |= VT8500_SWRTSCTS; /* set parity, bits per char, and stop bit */ vt8500_write(&vt8500_port->uart, lcr, VT8500_URLCR); @@ -521,6 +566,33 @@ static struct console vt8500_console = { #define VT8500_CONSOLE NULL #endif +#ifdef CONFIG_CONSOLE_POLL +static int vt8500_get_poll_char(struct uart_port *port) +{ + unsigned int status = vt8500_read(port, VT8500_URFIDX); + + if (!(status & 0x1f00)) + return NO_POLL_CHAR; + + return vt8500_read(port, VT8500_RXFIFO) & 0xff; +} + +static void vt8500_put_poll_char(struct uart_port *port, unsigned char c) +{ + unsigned int status, tmout = 10000; + + do { + status = vt8500_read(port, VT8500_URFIDX); + + if (--tmout == 0) + break; + udelay(1); + } while (status & 0x10); + + vt8500_write(port, c, VT8500_TXFIFO); +} +#endif + static struct uart_ops vt8500_uart_pops = { .tx_empty = vt8500_tx_empty, .set_mctrl = vt8500_set_mctrl, @@ -538,6 +610,10 @@ static struct uart_ops vt8500_uart_pops = { .request_port = vt8500_request_port, .config_port = vt8500_config_port, .verify_port = vt8500_verify_port, +#ifdef CONFIG_CONSOLE_POLL + .poll_get_char = vt8500_get_poll_char, + .poll_put_char = vt8500_put_poll_char, +#endif }; static struct uart_driver vt8500_uart_driver = { @@ -548,14 +624,31 @@ static struct uart_driver vt8500_uart_driver = { .cons = VT8500_CONSOLE, }; +static unsigned int vt8500_flags; /* none required so far */ +static unsigned int wm8880_flags = VT8500_HAS_SWRTSCTS_SWITCH; + +static const struct of_device_id wmt_dt_ids[] = { + { .compatible = "via,vt8500-uart", .data = &vt8500_flags}, + { .compatible = "wm,wm8880-uart", .data = &wm8880_flags}, + {} +}; + static int vt8500_serial_probe(struct platform_device *pdev) { struct vt8500_port *vt8500_port; struct resource *mmres, *irqres; struct device_node *np = pdev->dev.of_node; + const struct of_device_id *match; + const unsigned int *flags; int ret; int port; + match = of_match_device(wmt_dt_ids, &pdev->dev); + if (!match) + return -EINVAL; + + flags = match->data; + mmres = platform_get_resource(pdev, IORESOURCE_MEM, 0); irqres = platform_get_resource(pdev, IORESOURCE_IRQ, 0); if (!mmres || !irqres) @@ -605,6 +698,11 @@ static int vt8500_serial_probe(struct platform_device *pdev) return ret; } + vt8500_port->vt8500_uart_flags = *flags; + vt8500_port->clk_predivisor = DIV_ROUND_CLOSEST( + clk_get_rate(vt8500_port->clk), + VT8500_RECOMMENDED_CLK + ); vt8500_port->uart.type = PORT_VT8500; vt8500_port->uart.iotype = UPIO_MEM; vt8500_port->uart.mapbase = mmres->start; @@ -615,7 +713,10 @@ static int vt8500_serial_probe(struct platform_device *pdev) vt8500_port->uart.dev = &pdev->dev; vt8500_port->uart.flags = UPF_IOREMAP | UPF_BOOT_AUTOCONF; - vt8500_port->uart.uartclk = clk_get_rate(vt8500_port->clk); + /* Serial core uses the magic "16" everywhere - adjust for it */ + vt8500_port->uart.uartclk = 16 * clk_get_rate(vt8500_port->clk) / + vt8500_port->clk_predivisor / + VT8500_OVERSAMPLING_DIVISOR; snprintf(vt8500_port->name, sizeof(vt8500_port->name), "VT8500 UART%d", pdev->id); @@ -639,11 +740,6 @@ static int vt8500_serial_remove(struct platform_device *pdev) return 0; } -static const struct of_device_id wmt_dt_ids[] = { - { .compatible = "via,vt8500-uart", }, - {} -}; - static struct platform_driver vt8500_platform_driver = { .probe = vt8500_serial_probe, .remove = vt8500_serial_remove, diff --git a/drivers/tty/serial/xilinx_uartps.c b/drivers/tty/serial/xilinx_uartps.c index 806e4bcadbd7..200c1af2141b 100644 --- a/drivers/tty/serial/xilinx_uartps.c +++ b/drivers/tty/serial/xilinx_uartps.c @@ -1051,6 +1051,25 @@ static void cdns_uart_console_putchar(struct uart_port *port, int ch) cdns_uart_writel(ch, CDNS_UART_FIFO_OFFSET); } +static void cdns_early_write(struct console *con, const char *s, unsigned n) +{ + struct earlycon_device *dev = con->data; + + uart_console_write(&dev->port, s, n, cdns_uart_console_putchar); +} + +static int __init cdns_early_console_setup(struct earlycon_device *device, + const char *opt) +{ + if (!device->port.membase) + return -ENODEV; + + device->con->write = cdns_early_write; + + return 0; +} +EARLYCON_DECLARE(cdns, cdns_early_console_setup); + /** * cdns_uart_console_write - perform write operation * @co: Console handle @@ -1428,7 +1447,6 @@ static struct platform_driver cdns_uart_platform_driver = { .probe = cdns_uart_probe, .remove = cdns_uart_remove, .driver = { - .owner = THIS_MODULE, .name = CDNS_UART_NAME, .of_match_table = cdns_uart_of_match, .pm = &cdns_uart_dev_pm_ops, diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c index 8fbad3410c75..16a2c0237dd6 100644 --- a/drivers/tty/tty_io.c +++ b/drivers/tty/tty_io.c @@ -908,8 +908,7 @@ void no_tty(void) * stop_tty - propagate flow control * @tty: tty to stop * - * Perform flow control to the driver. For PTY/TTY pairs we - * must also propagate the TIOCKPKT status. May be called + * Perform flow control to the driver. May be called * on an already stopped device and will not re-call the driver * method. * @@ -919,64 +918,58 @@ void no_tty(void) * but not always. * * Locking: - * Uses the tty control lock internally + * flow_lock */ -void stop_tty(struct tty_struct *tty) +void __stop_tty(struct tty_struct *tty) { - unsigned long flags; - spin_lock_irqsave(&tty->ctrl_lock, flags); - if (tty->stopped) { - spin_unlock_irqrestore(&tty->ctrl_lock, flags); + if (tty->stopped) return; - } tty->stopped = 1; - if (tty->link && tty->link->packet) { - tty->ctrl_status &= ~TIOCPKT_START; - tty->ctrl_status |= TIOCPKT_STOP; - wake_up_interruptible_poll(&tty->link->read_wait, POLLIN); - } - spin_unlock_irqrestore(&tty->ctrl_lock, flags); if (tty->ops->stop) (tty->ops->stop)(tty); } +void stop_tty(struct tty_struct *tty) +{ + unsigned long flags; + + spin_lock_irqsave(&tty->flow_lock, flags); + __stop_tty(tty); + spin_unlock_irqrestore(&tty->flow_lock, flags); +} EXPORT_SYMBOL(stop_tty); /** * start_tty - propagate flow control * @tty: tty to start * - * Start a tty that has been stopped if at all possible. Perform - * any necessary wakeups and propagate the TIOCPKT status. If this - * is the tty was previous stopped and is being started then the - * driver start method is invoked and the line discipline woken. + * Start a tty that has been stopped if at all possible. If this + * tty was previous stopped and is now being started, the driver + * start method is invoked and the line discipline woken. * * Locking: - * ctrl_lock + * flow_lock */ -void start_tty(struct tty_struct *tty) +void __start_tty(struct tty_struct *tty) { - unsigned long flags; - spin_lock_irqsave(&tty->ctrl_lock, flags); - if (!tty->stopped || tty->flow_stopped) { - spin_unlock_irqrestore(&tty->ctrl_lock, flags); + if (!tty->stopped || tty->flow_stopped) return; - } tty->stopped = 0; - if (tty->link && tty->link->packet) { - tty->ctrl_status &= ~TIOCPKT_STOP; - tty->ctrl_status |= TIOCPKT_START; - wake_up_interruptible_poll(&tty->link->read_wait, POLLIN); - } - spin_unlock_irqrestore(&tty->ctrl_lock, flags); if (tty->ops->start) (tty->ops->start)(tty); - /* If we have a running line discipline it may need kicking */ tty_wakeup(tty); } +void start_tty(struct tty_struct *tty) +{ + unsigned long flags; + + spin_lock_irqsave(&tty->flow_lock, flags); + __start_tty(tty); + spin_unlock_irqrestore(&tty->flow_lock, flags); +} EXPORT_SYMBOL(start_tty); /* We limit tty time update visibility to every 8 seconds or so. */ @@ -1030,14 +1023,14 @@ static ssize_t tty_read(struct file *file, char __user *buf, size_t count, return i; } -void tty_write_unlock(struct tty_struct *tty) +static void tty_write_unlock(struct tty_struct *tty) __releases(&tty->atomic_write_lock) { mutex_unlock(&tty->atomic_write_lock); wake_up_interruptible_poll(&tty->write_wait, POLLOUT); } -int tty_write_lock(struct tty_struct *tty, int ndelay) +static int tty_write_lock(struct tty_struct *tty, int ndelay) __acquires(&tty->atomic_write_lock) { if (!mutex_trylock(&tty->atomic_write_lock)) { @@ -1224,6 +1217,35 @@ ssize_t redirected_tty_write(struct file *file, const char __user *buf, return tty_write(file, buf, count, ppos); } +/** + * tty_send_xchar - send priority character + * + * Send a high priority character to the tty even if stopped + * + * Locking: none for xchar method, write ordering for write method. + */ + +int tty_send_xchar(struct tty_struct *tty, char ch) +{ + int was_stopped = tty->stopped; + + if (tty->ops->send_xchar) { + tty->ops->send_xchar(tty, ch); + return 0; + } + + if (tty_write_lock(tty, 0) < 0) + return -ERESTARTSYS; + + if (was_stopped) + start_tty(tty); + tty->ops->write(tty, &ch, 1); + if (was_stopped) + stop_tty(tty); + tty_write_unlock(tty); + return 0; +} + static char ptychar[] = "pqrstuvwxyzabcde"; /** @@ -1544,13 +1566,14 @@ static void release_one_tty(struct work_struct *work) struct tty_struct *tty = container_of(work, struct tty_struct, hangup_work); struct tty_driver *driver = tty->driver; + struct module *owner = driver->owner; if (tty->ops->cleanup) tty->ops->cleanup(tty); tty->magic = 0; tty_driver_kref_put(driver); - module_put(driver->owner); + module_put(owner); spin_lock(&tty_files_lock); list_del_init(&tty->tty_files); @@ -2163,8 +2186,9 @@ static int __tty_fasync(int fd, struct file *filp, int on) } get_pid(pid); spin_unlock_irqrestore(&tty->ctrl_lock, flags); - retval = __f_setown(filp, pid, type, 0); + __f_setown(filp, pid, type, 0); put_pid(pid); + retval = 0; } out: return retval; @@ -3018,6 +3042,7 @@ struct tty_struct *alloc_tty_struct(struct tty_driver *driver, int idx) INIT_WORK(&tty->hangup_work, do_tty_hangup); mutex_init(&tty->atomic_write_lock); spin_lock_init(&tty->ctrl_lock); + spin_lock_init(&tty->flow_lock); INIT_LIST_HEAD(&tty->tty_files); INIT_WORK(&tty->SAK_work, do_SAK_work); diff --git a/drivers/tty/tty_ioctl.c b/drivers/tty/tty_ioctl.c index 6fd60fece6b4..62380ccf70fb 100644 --- a/drivers/tty/tty_ioctl.c +++ b/drivers/tty/tty_ioctl.c @@ -402,7 +402,7 @@ void tty_termios_encode_baud_rate(struct ktermios *termios, #ifdef BOTHER /* If the user asked for a precise weird speed give a precise weird - answer. If they asked for a Bfoo speed they many have problems + answer. If they asked for a Bfoo speed they may have problems digesting non-exact replies so fuzz a bit */ if ((termios->c_cflag & CBAUD) == BOTHER) @@ -912,35 +912,6 @@ static int set_ltchars(struct tty_struct *tty, struct ltchars __user *ltchars) #endif /** - * send_prio_char - send priority character - * - * Send a high priority character to the tty even if stopped - * - * Locking: none for xchar method, write ordering for write method. - */ - -static int send_prio_char(struct tty_struct *tty, char ch) -{ - int was_stopped = tty->stopped; - - if (tty->ops->send_xchar) { - tty->ops->send_xchar(tty, ch); - return 0; - } - - if (tty_write_lock(tty, 0) < 0) - return -ERESTARTSYS; - - if (was_stopped) - start_tty(tty); - tty->ops->write(tty, &ch, 1); - if (was_stopped) - stop_tty(tty); - tty_write_unlock(tty); - return 0; -} - -/** * tty_change_softcar - carrier change ioctl helper * @tty: tty to update * @arg: enable/disable CLOCAL @@ -1177,29 +1148,37 @@ int n_tty_ioctl_helper(struct tty_struct *tty, struct file *file, return retval; switch (arg) { case TCOOFF: + spin_lock_irq(&tty->flow_lock); if (!tty->flow_stopped) { tty->flow_stopped = 1; - stop_tty(tty); + __stop_tty(tty); } + spin_unlock_irq(&tty->flow_lock); break; case TCOON: + spin_lock_irq(&tty->flow_lock); if (tty->flow_stopped) { tty->flow_stopped = 0; - start_tty(tty); + __start_tty(tty); } + spin_unlock_irq(&tty->flow_lock); break; case TCIOFF: + down_read(&tty->termios_rwsem); if (STOP_CHAR(tty) != __DISABLED_CHAR) - return send_prio_char(tty, STOP_CHAR(tty)); + retval = tty_send_xchar(tty, STOP_CHAR(tty)); + up_read(&tty->termios_rwsem); break; case TCION: + down_read(&tty->termios_rwsem); if (START_CHAR(tty) != __DISABLED_CHAR) - return send_prio_char(tty, START_CHAR(tty)); + retval = tty_send_xchar(tty, START_CHAR(tty)); + up_read(&tty->termios_rwsem); break; default: return -EINVAL; } - return 0; + return retval; case TCFLSH: retval = tty_check_change(tty); if (retval) diff --git a/drivers/tty/vt/keyboard.c b/drivers/tty/vt/keyboard.c index d0e3a4497707..c039cfea5b11 100644 --- a/drivers/tty/vt/keyboard.c +++ b/drivers/tty/vt/keyboard.c @@ -268,30 +268,30 @@ EXPORT_SYMBOL(kd_mksound); static int kbd_rate_helper(struct input_handle *handle, void *data) { struct input_dev *dev = handle->dev; - struct kbd_repeat *rep = data; + struct kbd_repeat *rpt = data; if (test_bit(EV_REP, dev->evbit)) { - if (rep[0].delay > 0) + if (rpt[0].delay > 0) input_inject_event(handle, - EV_REP, REP_DELAY, rep[0].delay); - if (rep[0].period > 0) + EV_REP, REP_DELAY, rpt[0].delay); + if (rpt[0].period > 0) input_inject_event(handle, - EV_REP, REP_PERIOD, rep[0].period); + EV_REP, REP_PERIOD, rpt[0].period); - rep[1].delay = dev->rep[REP_DELAY]; - rep[1].period = dev->rep[REP_PERIOD]; + rpt[1].delay = dev->rep[REP_DELAY]; + rpt[1].period = dev->rep[REP_PERIOD]; } return 0; } -int kbd_rate(struct kbd_repeat *rep) +int kbd_rate(struct kbd_repeat *rpt) { - struct kbd_repeat data[2] = { *rep }; + struct kbd_repeat data[2] = { *rpt }; input_handler_for_each_handle(&kbd_handler, data, kbd_rate_helper); - *rep = data[1]; /* Copy currently used settings */ + *rpt = data[1]; /* Copy currently used settings */ return 0; } @@ -971,15 +971,15 @@ static unsigned char getledstate(void) return ledstate; } -void setledstate(struct kbd_struct *kbd, unsigned int led) +void setledstate(struct kbd_struct *kb, unsigned int led) { unsigned long flags; spin_lock_irqsave(&led_lock, flags); if (!(led & ~7)) { ledioctl = led; - kbd->ledmode = LED_SHOW_IOCTL; + kb->ledmode = LED_SHOW_IOCTL; } else - kbd->ledmode = LED_SHOW_FLAGS; + kb->ledmode = LED_SHOW_FLAGS; set_leds(); spin_unlock_irqrestore(&led_lock, flags); @@ -987,12 +987,12 @@ void setledstate(struct kbd_struct *kbd, unsigned int led) static inline unsigned char getleds(void) { - struct kbd_struct *kbd = kbd_table + fg_console; + struct kbd_struct *kb = kbd_table + fg_console; - if (kbd->ledmode == LED_SHOW_IOCTL) + if (kb->ledmode == LED_SHOW_IOCTL) return ledioctl; - return kbd->ledflagstate; + return kb->ledflagstate; } static int kbd_update_leds_helper(struct input_handle *handle, void *data) @@ -1018,12 +1018,12 @@ static int kbd_update_leds_helper(struct input_handle *handle, void *data) */ int vt_get_leds(int console, int flag) { - struct kbd_struct * kbd = kbd_table + console; + struct kbd_struct *kb = kbd_table + console; int ret; unsigned long flags; spin_lock_irqsave(&led_lock, flags); - ret = vc_kbd_led(kbd, flag); + ret = vc_kbd_led(kb, flag); spin_unlock_irqrestore(&led_lock, flags); return ret; @@ -1040,8 +1040,8 @@ EXPORT_SYMBOL_GPL(vt_get_leds); */ void vt_set_led_state(int console, int leds) { - struct kbd_struct * kbd = kbd_table + console; - setledstate(kbd, leds); + struct kbd_struct *kb = kbd_table + console; + setledstate(kb, leds); } /** @@ -1059,10 +1059,10 @@ void vt_set_led_state(int console, int leds) */ void vt_kbd_con_start(int console) { - struct kbd_struct * kbd = kbd_table + console; + struct kbd_struct *kb = kbd_table + console; unsigned long flags; spin_lock_irqsave(&led_lock, flags); - clr_vc_kbd_led(kbd, VC_SCROLLOCK); + clr_vc_kbd_led(kb, VC_SCROLLOCK); set_leds(); spin_unlock_irqrestore(&led_lock, flags); } @@ -1076,10 +1076,10 @@ void vt_kbd_con_start(int console) */ void vt_kbd_con_stop(int console) { - struct kbd_struct * kbd = kbd_table + console; + struct kbd_struct *kb = kbd_table + console; unsigned long flags; spin_lock_irqsave(&led_lock, flags); - set_vc_kbd_led(kbd, VC_SCROLLOCK); + set_vc_kbd_led(kb, VC_SCROLLOCK); set_leds(); spin_unlock_irqrestore(&led_lock, flags); } @@ -1512,15 +1512,14 @@ int __init kbd_init(void) /** * vt_do_diacrit - diacritical table updates * @cmd: ioctl request - * @up: pointer to user data for ioctl + * @udp: pointer to user data for ioctl * @perm: permissions check computed by caller * * Update the diacritical tables atomically and safely. Lock them * against simultaneous keypresses */ -int vt_do_diacrit(unsigned int cmd, void __user *up, int perm) +int vt_do_diacrit(unsigned int cmd, void __user *udp, int perm) { - struct kbdiacrs __user *a = up; unsigned long flags; int asize; int ret = 0; @@ -1528,12 +1527,13 @@ int vt_do_diacrit(unsigned int cmd, void __user *up, int perm) switch (cmd) { case KDGKBDIACR: { - struct kbdiacr *diacr; + struct kbdiacrs __user *a = udp; + struct kbdiacr *dia; int i; - diacr = kmalloc(MAX_DIACR * sizeof(struct kbdiacr), + dia = kmalloc(MAX_DIACR * sizeof(struct kbdiacr), GFP_KERNEL); - if (diacr == NULL) + if (!dia) return -ENOMEM; /* Lock the diacriticals table, make a copy and then @@ -1542,26 +1542,26 @@ int vt_do_diacrit(unsigned int cmd, void __user *up, int perm) asize = accent_table_size; for (i = 0; i < asize; i++) { - diacr[i].diacr = conv_uni_to_8bit( + dia[i].diacr = conv_uni_to_8bit( accent_table[i].diacr); - diacr[i].base = conv_uni_to_8bit( + dia[i].base = conv_uni_to_8bit( accent_table[i].base); - diacr[i].result = conv_uni_to_8bit( + dia[i].result = conv_uni_to_8bit( accent_table[i].result); } spin_unlock_irqrestore(&kbd_event_lock, flags); if (put_user(asize, &a->kb_cnt)) ret = -EFAULT; - else if (copy_to_user(a->kbdiacr, diacr, + else if (copy_to_user(a->kbdiacr, dia, asize * sizeof(struct kbdiacr))) ret = -EFAULT; - kfree(diacr); + kfree(dia); return ret; } case KDGKBDIACRUC: { - struct kbdiacrsuc __user *a = up; + struct kbdiacrsuc __user *a = udp; void *buf; buf = kmalloc(MAX_DIACR * sizeof(struct kbdiacruc), @@ -1589,8 +1589,8 @@ int vt_do_diacrit(unsigned int cmd, void __user *up, int perm) case KDSKBDIACR: { - struct kbdiacrs __user *a = up; - struct kbdiacr *diacr = NULL; + struct kbdiacrs __user *a = udp; + struct kbdiacr *dia = NULL; unsigned int ct; int i; @@ -1602,14 +1602,14 @@ int vt_do_diacrit(unsigned int cmd, void __user *up, int perm) return -EINVAL; if (ct) { - diacr = kmalloc(sizeof(struct kbdiacr) * ct, + dia = kmalloc(sizeof(struct kbdiacr) * ct, GFP_KERNEL); - if (diacr == NULL) + if (!dia) return -ENOMEM; - if (copy_from_user(diacr, a->kbdiacr, + if (copy_from_user(dia, a->kbdiacr, sizeof(struct kbdiacr) * ct)) { - kfree(diacr); + kfree(dia); return -EFAULT; } } @@ -1618,20 +1618,20 @@ int vt_do_diacrit(unsigned int cmd, void __user *up, int perm) accent_table_size = ct; for (i = 0; i < ct; i++) { accent_table[i].diacr = - conv_8bit_to_uni(diacr[i].diacr); + conv_8bit_to_uni(dia[i].diacr); accent_table[i].base = - conv_8bit_to_uni(diacr[i].base); + conv_8bit_to_uni(dia[i].base); accent_table[i].result = - conv_8bit_to_uni(diacr[i].result); + conv_8bit_to_uni(dia[i].result); } spin_unlock_irqrestore(&kbd_event_lock, flags); - kfree(diacr); + kfree(dia); return 0; } case KDSKBDIACRUC: { - struct kbdiacrsuc __user *a = up; + struct kbdiacrsuc __user *a = udp; unsigned int ct; void *buf = NULL; @@ -1679,28 +1679,28 @@ int vt_do_diacrit(unsigned int cmd, void __user *up, int perm) */ int vt_do_kdskbmode(int console, unsigned int arg) { - struct kbd_struct * kbd = kbd_table + console; + struct kbd_struct *kb = kbd_table + console; int ret = 0; unsigned long flags; spin_lock_irqsave(&kbd_event_lock, flags); switch(arg) { case K_RAW: - kbd->kbdmode = VC_RAW; + kb->kbdmode = VC_RAW; break; case K_MEDIUMRAW: - kbd->kbdmode = VC_MEDIUMRAW; + kb->kbdmode = VC_MEDIUMRAW; break; case K_XLATE: - kbd->kbdmode = VC_XLATE; + kb->kbdmode = VC_XLATE; do_compute_shiftstate(); break; case K_UNICODE: - kbd->kbdmode = VC_UNICODE; + kb->kbdmode = VC_UNICODE; do_compute_shiftstate(); break; case K_OFF: - kbd->kbdmode = VC_OFF; + kb->kbdmode = VC_OFF; break; default: ret = -EINVAL; @@ -1719,17 +1719,17 @@ int vt_do_kdskbmode(int console, unsigned int arg) */ int vt_do_kdskbmeta(int console, unsigned int arg) { - struct kbd_struct * kbd = kbd_table + console; + struct kbd_struct *kb = kbd_table + console; int ret = 0; unsigned long flags; spin_lock_irqsave(&kbd_event_lock, flags); switch(arg) { case K_METABIT: - clr_vc_kbd_mode(kbd, VC_META); + clr_vc_kbd_mode(kb, VC_META); break; case K_ESCPREFIX: - set_vc_kbd_mode(kbd, VC_META); + set_vc_kbd_mode(kb, VC_META); break; default: ret = -EINVAL; @@ -1768,7 +1768,7 @@ int vt_do_kbkeycode_ioctl(int cmd, struct kbkeycode __user *user_kbkc, int vt_do_kdsk_ioctl(int cmd, struct kbentry __user *user_kbe, int perm, int console) { - struct kbd_struct * kbd = kbd_table + console; + struct kbd_struct *kb = kbd_table + console; struct kbentry tmp; ushort *key_map, *new_map, val, ov; unsigned long flags; @@ -1786,7 +1786,7 @@ int vt_do_kdsk_ioctl(int cmd, struct kbentry __user *user_kbe, int perm, key_map = key_maps[s]; if (key_map) { val = U(key_map[i]); - if (kbd->kbdmode != VC_UNICODE && KTYP(val) >= NR_TYPES) + if (kb->kbdmode != VC_UNICODE && KTYP(val) >= NR_TYPES) val = K_HOLE; } else val = (i ? K_HOLE : K_NOSUCHMAP); @@ -1814,7 +1814,7 @@ int vt_do_kdsk_ioctl(int cmd, struct kbentry __user *user_kbe, int perm, if (KVAL(v) > max_vals[KTYP(v)]) return -EINVAL; } else - if (kbd->kbdmode != VC_UNICODE) + if (kb->kbdmode != VC_UNICODE) return -EINVAL; /* ++Geert: non-PC keyboards may generate keycode zero */ @@ -1985,7 +1985,7 @@ reterr: int vt_do_kdskled(int console, int cmd, unsigned long arg, int perm) { - struct kbd_struct * kbd = kbd_table + console; + struct kbd_struct *kb = kbd_table + console; unsigned long flags; unsigned char ucval; @@ -1994,7 +1994,7 @@ int vt_do_kdskled(int console, int cmd, unsigned long arg, int perm) /* don't use them - they will go away without warning */ case KDGKBLED: spin_lock_irqsave(&kbd_event_lock, flags); - ucval = kbd->ledflagstate | (kbd->default_ledflagstate << 4); + ucval = kb->ledflagstate | (kb->default_ledflagstate << 4); spin_unlock_irqrestore(&kbd_event_lock, flags); return put_user(ucval, (char __user *)arg); @@ -2004,8 +2004,8 @@ int vt_do_kdskled(int console, int cmd, unsigned long arg, int perm) if (arg & ~0x77) return -EINVAL; spin_lock_irqsave(&led_lock, flags); - kbd->ledflagstate = (arg & 7); - kbd->default_ledflagstate = ((arg >> 4) & 7); + kb->ledflagstate = (arg & 7); + kb->default_ledflagstate = ((arg >> 4) & 7); set_leds(); spin_unlock_irqrestore(&led_lock, flags); return 0; @@ -2019,7 +2019,7 @@ int vt_do_kdskled(int console, int cmd, unsigned long arg, int perm) case KDSETLED: if (!perm) return -EPERM; - setledstate(kbd, arg); + setledstate(kb, arg); return 0; } return -ENOIOCTLCMD; @@ -2027,9 +2027,9 @@ int vt_do_kdskled(int console, int cmd, unsigned long arg, int perm) int vt_do_kdgkbmode(int console) { - struct kbd_struct * kbd = kbd_table + console; + struct kbd_struct *kb = kbd_table + console; /* This is a spot read so needs no locking */ - switch (kbd->kbdmode) { + switch (kb->kbdmode) { case VC_RAW: return K_RAW; case VC_MEDIUMRAW: @@ -2051,9 +2051,9 @@ int vt_do_kdgkbmode(int console) */ int vt_do_kdgkbmeta(int console) { - struct kbd_struct * kbd = kbd_table + console; + struct kbd_struct *kb = kbd_table + console; /* Again a spot read so no locking */ - return vc_kbd_mode(kbd, VC_META) ? K_ESCPREFIX : K_METABIT; + return vc_kbd_mode(kb, VC_META) ? K_ESCPREFIX : K_METABIT; } /** @@ -2092,19 +2092,19 @@ int vt_get_shift_state(void) */ void vt_reset_keyboard(int console) { - struct kbd_struct * kbd = kbd_table + console; + struct kbd_struct *kb = kbd_table + console; unsigned long flags; spin_lock_irqsave(&kbd_event_lock, flags); - set_vc_kbd_mode(kbd, VC_REPEAT); - clr_vc_kbd_mode(kbd, VC_CKMODE); - clr_vc_kbd_mode(kbd, VC_APPLIC); - clr_vc_kbd_mode(kbd, VC_CRLF); - kbd->lockstate = 0; - kbd->slockstate = 0; + set_vc_kbd_mode(kb, VC_REPEAT); + clr_vc_kbd_mode(kb, VC_CKMODE); + clr_vc_kbd_mode(kb, VC_APPLIC); + clr_vc_kbd_mode(kb, VC_CRLF); + kb->lockstate = 0; + kb->slockstate = 0; spin_lock(&led_lock); - kbd->ledmode = LED_SHOW_FLAGS; - kbd->ledflagstate = kbd->default_ledflagstate; + kb->ledmode = LED_SHOW_FLAGS; + kb->ledflagstate = kb->default_ledflagstate; spin_unlock(&led_lock); /* do not do set_leds here because this causes an endless tasklet loop when the keyboard hasn't been initialized yet */ @@ -2122,8 +2122,8 @@ void vt_reset_keyboard(int console) int vt_get_kbd_mode_bit(int console, int bit) { - struct kbd_struct * kbd = kbd_table + console; - return vc_kbd_mode(kbd, bit); + struct kbd_struct *kb = kbd_table + console; + return vc_kbd_mode(kb, bit); } /** @@ -2137,11 +2137,11 @@ int vt_get_kbd_mode_bit(int console, int bit) void vt_set_kbd_mode_bit(int console, int bit) { - struct kbd_struct * kbd = kbd_table + console; + struct kbd_struct *kb = kbd_table + console; unsigned long flags; spin_lock_irqsave(&kbd_event_lock, flags); - set_vc_kbd_mode(kbd, bit); + set_vc_kbd_mode(kb, bit); spin_unlock_irqrestore(&kbd_event_lock, flags); } @@ -2156,10 +2156,10 @@ void vt_set_kbd_mode_bit(int console, int bit) void vt_clr_kbd_mode_bit(int console, int bit) { - struct kbd_struct * kbd = kbd_table + console; + struct kbd_struct *kb = kbd_table + console; unsigned long flags; spin_lock_irqsave(&kbd_event_lock, flags); - clr_vc_kbd_mode(kbd, bit); + clr_vc_kbd_mode(kb, bit); spin_unlock_irqrestore(&kbd_event_lock, flags); } |