summaryrefslogtreecommitdiff
path: root/drivers/tty/serial
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/tty/serial')
-rw-r--r--drivers/tty/serial/8250/8250_em.c2
-rw-r--r--drivers/tty/serial/8250/8250_exar.c24
-rw-r--r--drivers/tty/serial/8250/8250_fintek.c2
-rw-r--r--drivers/tty/serial/8250/8250_pci.c2
-rw-r--r--drivers/tty/serial/8250/8250_port.c11
-rw-r--r--drivers/tty/serial/8250/8250_uniphier.c6
-rw-r--r--drivers/tty/serial/Kconfig1
-rw-r--r--drivers/tty/serial/Makefile1
-rw-r--r--drivers/tty/serial/amba-pl011.c16
-rw-r--r--drivers/tty/serial/atmel_serial.c2
-rw-r--r--drivers/tty/serial/omap-serial.c2
-rw-r--r--drivers/tty/serial/qcom_geni_serial.c11
-rw-r--r--drivers/tty/serial/rda-uart.c2
-rw-r--r--drivers/tty/serial/samsung_tty.c8
-rw-r--r--drivers/tty/serial/serial-tegra.c2
-rw-r--r--drivers/tty/serial/serial_core.c2
-rw-r--r--drivers/tty/serial/stm32-usart.c2
-rw-r--r--drivers/tty/serial/sunsu.c2
-rw-r--r--drivers/tty/serial/sunzilog.c2
-rw-r--r--drivers/tty/serial/xilinx_uartps.c2
20 files changed, 66 insertions, 36 deletions
diff --git a/drivers/tty/serial/8250/8250_em.c b/drivers/tty/serial/8250/8250_em.c
index db88dee3a399..f8e99995eee9 100644
--- a/drivers/tty/serial/8250/8250_em.c
+++ b/drivers/tty/serial/8250/8250_em.c
@@ -39,7 +39,7 @@ static void serial8250_em_serial_out(struct uart_port *p, int offset, int value)
break;
case UART_IER: /* IER @ 0x04 */
value &= 0x0f; /* only 4 valid bits - not Xscale */
- /* fall-through */
+ fallthrough;
case UART_DLL_EM: /* DLL @ 0x24 (+9) */
case UART_DLM_EM: /* DLM @ 0x28 (+9) */
writel(value, p->membase + (offset << 2));
diff --git a/drivers/tty/serial/8250/8250_exar.c b/drivers/tty/serial/8250/8250_exar.c
index 04b9af7ed941..2d0e7c7e408d 100644
--- a/drivers/tty/serial/8250/8250_exar.c
+++ b/drivers/tty/serial/8250/8250_exar.c
@@ -744,6 +744,24 @@ static const struct exar8250_board pbn_exar_XR17V35x = {
.exit = pci_xr17v35x_exit,
};
+static const struct exar8250_board pbn_fastcom35x_2 = {
+ .num_ports = 2,
+ .setup = pci_xr17v35x_setup,
+ .exit = pci_xr17v35x_exit,
+};
+
+static const struct exar8250_board pbn_fastcom35x_4 = {
+ .num_ports = 4,
+ .setup = pci_xr17v35x_setup,
+ .exit = pci_xr17v35x_exit,
+};
+
+static const struct exar8250_board pbn_fastcom35x_8 = {
+ .num_ports = 8,
+ .setup = pci_xr17v35x_setup,
+ .exit = pci_xr17v35x_exit,
+};
+
static const struct exar8250_board pbn_exar_XR17V4358 = {
.num_ports = 12,
.setup = pci_xr17v35x_setup,
@@ -811,9 +829,9 @@ static const struct pci_device_id exar_pci_tbl[] = {
EXAR_DEVICE(EXAR, XR17V358, pbn_exar_XR17V35x),
EXAR_DEVICE(EXAR, XR17V4358, pbn_exar_XR17V4358),
EXAR_DEVICE(EXAR, XR17V8358, pbn_exar_XR17V8358),
- EXAR_DEVICE(COMMTECH, 4222PCIE, pbn_exar_XR17V35x),
- EXAR_DEVICE(COMMTECH, 4224PCIE, pbn_exar_XR17V35x),
- EXAR_DEVICE(COMMTECH, 4228PCIE, pbn_exar_XR17V35x),
+ EXAR_DEVICE(COMMTECH, 4222PCIE, pbn_fastcom35x_2),
+ EXAR_DEVICE(COMMTECH, 4224PCIE, pbn_fastcom35x_4),
+ EXAR_DEVICE(COMMTECH, 4228PCIE, pbn_fastcom35x_8),
EXAR_DEVICE(COMMTECH, 4222PCI335, pbn_fastcom335_2),
EXAR_DEVICE(COMMTECH, 4224PCI335, pbn_fastcom335_4),
diff --git a/drivers/tty/serial/8250/8250_fintek.c b/drivers/tty/serial/8250/8250_fintek.c
index d1d253c4b518..31c9e83ea3cb 100644
--- a/drivers/tty/serial/8250/8250_fintek.c
+++ b/drivers/tty/serial/8250/8250_fintek.c
@@ -255,7 +255,7 @@ static void fintek_8250_set_irq_mode(struct fintek_8250 *pdata, bool is_level)
case CHIP_ID_F81866:
sio_write_mask_reg(pdata, F81866_FIFO_CTRL, F81866_IRQ_MODE1,
0);
- /* fall through */
+ fallthrough;
case CHIP_ID_F81865:
sio_write_mask_reg(pdata, F81866_IRQ_MODE, F81866_IRQ_SHARE,
F81866_IRQ_SHARE);
diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c
index 1a74d511b02a..3eb2d485eaeb 100644
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -631,7 +631,7 @@ pci_timedia_setup(struct serial_private *priv,
break;
case 3:
offset = board->uart_offset;
- /* FALLTHROUGH */
+ fallthrough;
case 4: /* BAR 2 */
case 5: /* BAR 3 */
case 6: /* BAR 4 */
diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c
index 09475695effd..c71d647eb87a 100644
--- a/drivers/tty/serial/8250/8250_port.c
+++ b/drivers/tty/serial/8250/8250_port.c
@@ -1872,7 +1872,7 @@ static bool handle_rx_dma(struct uart_8250_port *up, unsigned int iir)
switch (iir & 0x3f) {
case UART_IIR_RX_TIMEOUT:
serial8250_rx_dma_flush(up);
- /* fall-through */
+ fallthrough;
case UART_IIR_RLSI:
return true;
}
@@ -2275,6 +2275,10 @@ int serial8250_do_startup(struct uart_port *port)
if (port->irq && !(up->port.flags & UPF_NO_THRE_TEST)) {
unsigned char iir1;
+
+ if (port->irqflags & IRQF_SHARED)
+ disable_irq_nosync(port->irq);
+
/*
* Test for UARTs that do not reassert THRE when the
* transmitter is idle and the interrupt has already
@@ -2284,8 +2288,6 @@ int serial8250_do_startup(struct uart_port *port)
* allow register changes to become visible.
*/
spin_lock_irqsave(&port->lock, flags);
- if (up->port.irqflags & IRQF_SHARED)
- disable_irq_nosync(port->irq);
wait_for_xmitr(up, UART_LSR_THRE);
serial_port_out_sync(port, UART_IER, UART_IER_THRI);
@@ -2297,9 +2299,10 @@ int serial8250_do_startup(struct uart_port *port)
iir = serial_port_in(port, UART_IIR);
serial_port_out(port, UART_IER, 0);
+ spin_unlock_irqrestore(&port->lock, flags);
+
if (port->irqflags & IRQF_SHARED)
enable_irq(port->irq);
- spin_unlock_irqrestore(&port->lock, flags);
/*
* If the interrupt is not reasserted, or we otherwise
diff --git a/drivers/tty/serial/8250/8250_uniphier.c b/drivers/tty/serial/8250/8250_uniphier.c
index e0b73a5402db..a2978abab0db 100644
--- a/drivers/tty/serial/8250/8250_uniphier.c
+++ b/drivers/tty/serial/8250/8250_uniphier.c
@@ -75,7 +75,7 @@ static unsigned int uniphier_serial_in(struct uart_port *p, int offset)
break;
case UART_LCR:
valshift = 8;
- /* fall through */
+ fallthrough;
case UART_MCR:
offset = UNIPHIER_UART_LCR_MCR;
break;
@@ -101,7 +101,7 @@ static void uniphier_serial_out(struct uart_port *p, int offset, int value)
case UART_SCR:
/* No SCR for this hardware. Use CHAR as a scratch register */
valshift = 8;
- /* fall through */
+ fallthrough;
case UART_FCR:
offset = UNIPHIER_UART_CHAR_FCR;
break;
@@ -109,7 +109,7 @@ static void uniphier_serial_out(struct uart_port *p, int offset, int value)
valshift = 8;
/* Divisor latch access bit does not exist. */
value &= ~UART_LCR_DLAB;
- /* fall through */
+ fallthrough;
case UART_MCR:
offset = UNIPHIER_UART_LCR_MCR;
break;
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index 8a0352eb337c..9409be982aa6 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -517,6 +517,7 @@ config SERIAL_IMX_CONSOLE
config SERIAL_IMX_EARLYCON
bool "Earlycon on IMX serial port"
+ depends on ARCH_MXC || COMPILE_TEST
depends on OF
select SERIAL_EARLYCON
help
diff --git a/drivers/tty/serial/Makefile b/drivers/tty/serial/Makefile
index d056ee6cca33..caf167f0c10a 100644
--- a/drivers/tty/serial/Makefile
+++ b/drivers/tty/serial/Makefile
@@ -43,6 +43,7 @@ obj-$(CONFIG_SERIAL_ZS) += zs.o
obj-$(CONFIG_SERIAL_SH_SCI) += sh-sci.o
obj-$(CONFIG_SERIAL_CPM) += cpm_uart/
obj-$(CONFIG_SERIAL_IMX) += imx.o
+obj-$(CONFIG_SERIAL_IMX_EARLYCON) += imx_earlycon.o
obj-$(CONFIG_SERIAL_MPC52xx) += mpc52xx_uart.o
obj-$(CONFIG_SERIAL_ICOM) += icom.o
obj-$(CONFIG_SERIAL_MESON) += meson_uart.o
diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index c010f639298d..67498594d7d7 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -2241,9 +2241,8 @@ pl011_console_write(struct console *co, const char *s, unsigned int count)
clk_disable(uap->clk);
}
-static void __init
-pl011_console_get_options(struct uart_amba_port *uap, int *baud,
- int *parity, int *bits)
+static void pl011_console_get_options(struct uart_amba_port *uap, int *baud,
+ int *parity, int *bits)
{
if (pl011_read(uap, REG_CR) & UART01x_CR_UARTEN) {
unsigned int lcr_h, ibrd, fbrd;
@@ -2276,7 +2275,7 @@ pl011_console_get_options(struct uart_amba_port *uap, int *baud,
}
}
-static int __init pl011_console_setup(struct console *co, char *options)
+static int pl011_console_setup(struct console *co, char *options)
{
struct uart_amba_port *uap;
int baud = 38400;
@@ -2344,8 +2343,8 @@ static int __init pl011_console_setup(struct console *co, char *options)
*
* Returns 0 if console matches; otherwise non-zero to use default matching
*/
-static int __init pl011_console_match(struct console *co, char *name, int idx,
- char *options)
+static int pl011_console_match(struct console *co, char *name, int idx,
+ char *options)
{
unsigned char iotype;
resource_size_t addr;
@@ -2615,7 +2614,7 @@ static int pl011_setup_port(struct device *dev, struct uart_amba_port *uap,
static int pl011_register_port(struct uart_amba_port *uap)
{
- int ret;
+ int ret, i;
/* Ensure interrupts from this UART are masked and cleared */
pl011_write(0, uap, REG_IMSC);
@@ -2626,6 +2625,9 @@ static int pl011_register_port(struct uart_amba_port *uap)
if (ret < 0) {
dev_err(uap->port.dev,
"Failed to register AMBA-PL011 driver\n");
+ for (i = 0; i < ARRAY_SIZE(amba_ports); i++)
+ if (amba_ports[i] == uap)
+ amba_ports[i] = NULL;
return ret;
}
}
diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c
index e43471b33710..bb5fc8bdd57a 100644
--- a/drivers/tty/serial/atmel_serial.c
+++ b/drivers/tty/serial/atmel_serial.c
@@ -1845,7 +1845,7 @@ static void atmel_get_ip_name(struct uart_port *port)
version = atmel_uart_readl(port, ATMEL_US_VERSION);
switch (version) {
case 0x814: /* sama5d2 */
- /* fall through */
+ fallthrough;
case 0x701: /* sama5d4 */
atmel_port->fidi_min = 3;
atmel_port->fidi_max = 65535;
diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c
index 8573fc9cb0cd..76b94d0ff586 100644
--- a/drivers/tty/serial/omap-serial.c
+++ b/drivers/tty/serial/omap-serial.c
@@ -587,7 +587,6 @@ static irqreturn_t serial_omap_irq(int irq, void *dev_id)
transmit_chars(up, lsr);
break;
case UART_IIR_RX_TIMEOUT:
- /* FALLTHROUGH */
case UART_IIR_RDI:
serial_omap_rdi(up, lsr);
break;
@@ -598,7 +597,6 @@ static irqreturn_t serial_omap_irq(int irq, void *dev_id)
/* simply try again */
break;
case UART_IIR_XOFF:
- /* FALLTHROUGH */
default:
break;
}
diff --git a/drivers/tty/serial/qcom_geni_serial.c b/drivers/tty/serial/qcom_geni_serial.c
index 3aa29d201f54..184b458820a3 100644
--- a/drivers/tty/serial/qcom_geni_serial.c
+++ b/drivers/tty/serial/qcom_geni_serial.c
@@ -361,11 +361,16 @@ static int qcom_geni_serial_get_char(struct uart_port *uport)
return NO_POLL_CHAR;
if (word_cnt == 1 && (status & RX_LAST))
+ /*
+ * NOTE: If RX_LAST_BYTE_VALID is 0 it needs to be
+ * treated as if it was BYTES_PER_FIFO_WORD.
+ */
private_data->poll_cached_bytes_cnt =
(status & RX_LAST_BYTE_VALID_MSK) >>
RX_LAST_BYTE_VALID_SHFT;
- else
- private_data->poll_cached_bytes_cnt = 4;
+
+ if (private_data->poll_cached_bytes_cnt == 0)
+ private_data->poll_cached_bytes_cnt = BYTES_PER_FIFO_WORD;
private_data->poll_cached_bytes =
readl(uport->membase + SE_GENI_RX_FIFOn);
@@ -1098,7 +1103,7 @@ static unsigned int qcom_geni_serial_tx_empty(struct uart_port *uport)
}
#ifdef CONFIG_SERIAL_QCOM_GENI_CONSOLE
-static int __init qcom_geni_console_setup(struct console *co, char *options)
+static int qcom_geni_console_setup(struct console *co, char *options)
{
struct uart_port *uport;
struct qcom_geni_serial_port *port;
diff --git a/drivers/tty/serial/rda-uart.c b/drivers/tty/serial/rda-uart.c
index b5ef86ae2746..85366e059258 100644
--- a/drivers/tty/serial/rda-uart.c
+++ b/drivers/tty/serial/rda-uart.c
@@ -259,7 +259,7 @@ static void rda_uart_set_termios(struct uart_port *port,
case CS5:
case CS6:
dev_warn(port->dev, "bit size not supported, using 7 bits\n");
- /* Fall through */
+ fallthrough;
case CS7:
ctrl &= ~RDA_UART_DBITS_8;
break;
diff --git a/drivers/tty/serial/samsung_tty.c b/drivers/tty/serial/samsung_tty.c
index 8ed3482d2e1e..8ae3e03fbd8c 100644
--- a/drivers/tty/serial/samsung_tty.c
+++ b/drivers/tty/serial/samsung_tty.c
@@ -1905,9 +1905,11 @@ static int s3c24xx_serial_init_port(struct s3c24xx_uart_port *ourport,
ourport->tx_irq = ret + 1;
}
- ret = platform_get_irq(platdev, 1);
- if (ret > 0)
- ourport->tx_irq = ret;
+ if (!s3c24xx_serial_has_interrupt_mask(port)) {
+ ret = platform_get_irq(platdev, 1);
+ if (ret > 0)
+ ourport->tx_irq = ret;
+ }
/*
* DMA is currently supported only on DT platforms, if DMA properties
* are specified.
diff --git a/drivers/tty/serial/serial-tegra.c b/drivers/tty/serial/serial-tegra.c
index b87914ae6da8..bd13014a1c53 100644
--- a/drivers/tty/serial/serial-tegra.c
+++ b/drivers/tty/serial/serial-tegra.c
@@ -876,7 +876,7 @@ static irqreturn_t tegra_uart_isr(int irq, void *data)
tegra_uart_write(tup, ier, UART_IER);
break;
}
- /* Fall through */
+ fallthrough;
case 2: /* Receive */
if (!tup->use_rx_pio) {
is_rx_start = tup->rx_in_progress;
diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c
index 3403dd790517..f797c971cd82 100644
--- a/drivers/tty/serial/serial_core.c
+++ b/drivers/tty/serial/serial_core.c
@@ -2101,7 +2101,7 @@ uart_set_options(struct uart_port *port, struct console *co,
switch (parity) {
case 'o': case 'O':
termios.c_cflag |= PARODD;
- /*fall through*/
+ fallthrough;
case 'e': case 'E':
termios.c_cflag |= PARENB;
break;
diff --git a/drivers/tty/serial/stm32-usart.c b/drivers/tty/serial/stm32-usart.c
index 143300a80090..ba503dd04ce2 100644
--- a/drivers/tty/serial/stm32-usart.c
+++ b/drivers/tty/serial/stm32-usart.c
@@ -970,7 +970,7 @@ static int stm32_init_port(struct stm32_port *stm32port,
return ret;
if (stm32port->info->cfg.has_wakeup) {
- stm32port->wakeirq = platform_get_irq(pdev, 1);
+ stm32port->wakeirq = platform_get_irq_optional(pdev, 1);
if (stm32port->wakeirq <= 0 && stm32port->wakeirq != -ENXIO)
return stm32port->wakeirq ? : -ENODEV;
}
diff --git a/drivers/tty/serial/sunsu.c b/drivers/tty/serial/sunsu.c
index 8ce9a7a256e5..319e5ceb6130 100644
--- a/drivers/tty/serial/sunsu.c
+++ b/drivers/tty/serial/sunsu.c
@@ -514,7 +514,7 @@ static void receive_kbd_ms_chars(struct uart_sunsu_port *up, int is_break)
switch (ret) {
case 2:
sunsu_change_mouse_baud(up);
- /* fallthru */
+ fallthrough;
case 1:
break;
diff --git a/drivers/tty/serial/sunzilog.c b/drivers/tty/serial/sunzilog.c
index 7ea06bbc6197..001e19d7c17d 100644
--- a/drivers/tty/serial/sunzilog.c
+++ b/drivers/tty/serial/sunzilog.c
@@ -306,7 +306,7 @@ static void sunzilog_kbdms_receive_chars(struct uart_sunzilog_port *up,
switch (ret) {
case 2:
sunzilog_change_mouse_baud(up);
- /* fallthru */
+ fallthrough;
case 1:
break;
diff --git a/drivers/tty/serial/xilinx_uartps.c b/drivers/tty/serial/xilinx_uartps.c
index 2833f1418d6d..a9b1ee27183a 100644
--- a/drivers/tty/serial/xilinx_uartps.c
+++ b/drivers/tty/serial/xilinx_uartps.c
@@ -544,7 +544,7 @@ static int cdns_uart_clk_notifier_cb(struct notifier_block *nb,
cdns_uart->baud = cdns_uart_set_baud_rate(cdns_uart->port,
cdns_uart->baud);
- /* fall through */
+ fallthrough;
case ABORT_RATE_CHANGE:
if (!locked)
spin_lock_irqsave(&cdns_uart->port->lock, flags);
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-25 02:03:19 +0300