1 files changed, 44 insertions, 5 deletions

diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c
index 3158e17b665c..4604153b7954 100644
--- a/drivers/tty/serial/sh-sci.c
+++ b/drivers/tty/serial/sh-sci.c
@@ -1052,9 +1052,17 @@ static int sci_request_irq(struct sci_port *port)
 		if (SCIx_IRQ_IS_MUXED(port)) {
 			i = SCIx_MUX_IRQ;
 			irq = up->irq;
-		} else
+		} else {
 			irq = port->cfg->irqs[i];
 
+			/*
+			 * Certain port types won't support all of the
+			 * available interrupt sources.
+			 */
+			if (unlikely(!irq))
+				continue;
+		}
+
 		desc = sci_irq_desc + i;
 		port->irqstr[j] = kasprintf(GFP_KERNEL, "%s:%s",
 					    dev_name(up->dev), desc->desc);
@@ -1094,6 +1102,15 @@ static void sci_free_irq(struct sci_port *port)
 	 * IRQ first.
 	 */
 	for (i = 0; i < SCIx_NR_IRQS; i++) {
+		unsigned int irq = port->cfg->irqs[i];
+
+		/*
+		 * Certain port types won't support all of the available
+		 * interrupt sources.
+		 */
+		if (unlikely(!irq))
+			continue;
+
 		free_irq(port->cfg->irqs[i], port);
 		kfree(port->irqstr[i]);
 
@@ -1564,10 +1581,32 @@ static void sci_enable_ms(struct uart_port *port)
 
 static void sci_break_ctl(struct uart_port *port, int break_state)
 {
-	/*
-	 * Not supported by hardware. Most parts couple break and rx
-	 * interrupts together, with break detection always enabled.
-	 */
+	struct sci_port *s = to_sci_port(port);
+	struct plat_sci_reg *reg = sci_regmap[s->cfg->regtype] + SCSPTR;
+	unsigned short scscr, scsptr;
+
+	/* check wheter the port has SCSPTR */
+	if (!reg->size) {
+		/*
+		 * Not supported by hardware. Most parts couple break and rx
+		 * interrupts together, with break detection always enabled.
+		 */
+		return;
+	}
+
+	scsptr = serial_port_in(port, SCSPTR);
+	scscr = serial_port_in(port, SCSCR);
+
+	if (break_state == -1) {
+		scsptr = (scsptr | SCSPTR_SPB2IO) & ~SCSPTR_SPB2DT;
+		scscr &= ~SCSCR_TE;
+	} else {
+		scsptr = (scsptr | SCSPTR_SPB2DT) & ~SCSPTR_SPB2IO;
+		scscr |= SCSCR_TE;
+	}
+
+	serial_port_out(port, SCSPTR, scsptr);
+	serial_port_out(port, SCSCR, scscr);
 }
 
 #ifdef CONFIG_SERIAL_SH_SCI_DMA