summaryrefslogtreecommitdiff
path: root/drivers/tty/serial/serial_core.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/tty/serial/serial_core.c')
-rw-r--r--drivers/tty/serial/serial_core.c88
1 files changed, 65 insertions, 23 deletions
diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c
index f1348a509552..b56ed8c376b2 100644
--- a/drivers/tty/serial/serial_core.c
+++ b/drivers/tty/serial/serial_core.c
@@ -156,7 +156,7 @@ static void __uart_start(struct uart_state *state)
* enabled, serial_port_runtime_resume() calls start_tx() again
* after enabling the device.
*/
- if (!pm_runtime_enabled(port->dev) || pm_runtime_active(port->dev))
+ if (pm_runtime_active(&port_dev->dev))
port->ops->start_tx(port);
pm_runtime_mark_last_busy(&port_dev->dev);
pm_runtime_put_autosuspend(&port_dev->dev);
@@ -410,11 +410,10 @@ void
uart_update_timeout(struct uart_port *port, unsigned int cflag,
unsigned int baud)
{
- unsigned int size = tty_get_frame_size(cflag);
- u64 frame_time;
+ u64 temp = tty_get_frame_size(cflag);
- frame_time = (u64)size * NSEC_PER_SEC;
- port->frame_time = DIV64_U64_ROUND_UP(frame_time, baud);
+ temp *= NSEC_PER_SEC;
+ port->frame_time = (unsigned int)DIV64_U64_ROUND_UP(temp, baud);
}
EXPORT_SYMBOL(uart_update_timeout);
@@ -687,7 +686,7 @@ EXPORT_SYMBOL_GPL(uart_xchar_out);
* This function is used to send a high-priority XON/XOFF character to
* the device
*/
-static void uart_send_xchar(struct tty_struct *tty, char ch)
+static void uart_send_xchar(struct tty_struct *tty, u8 ch)
{
struct uart_state *state = tty->driver_data;
struct uart_port *port;
@@ -1371,20 +1370,34 @@ static void uart_sanitize_serial_rs485(struct uart_port *port, struct serial_rs4
return;
}
- /* Pick sane settings if the user hasn't */
- if ((supported_flags & (SER_RS485_RTS_ON_SEND|SER_RS485_RTS_AFTER_SEND)) &&
- !(rs485->flags & SER_RS485_RTS_ON_SEND) ==
- !(rs485->flags & SER_RS485_RTS_AFTER_SEND)) {
- dev_warn_ratelimited(port->dev,
- "%s (%d): invalid RTS setting, using RTS_ON_SEND instead\n",
- port->name, port->line);
- rs485->flags |= SER_RS485_RTS_ON_SEND;
- rs485->flags &= ~SER_RS485_RTS_AFTER_SEND;
- supported_flags |= SER_RS485_RTS_ON_SEND|SER_RS485_RTS_AFTER_SEND;
+ /* Clear other RS485 flags but SER_RS485_TERMINATE_BUS and return if enabling RS422 */
+ if (rs485->flags & SER_RS485_MODE_RS422) {
+ rs485->flags &= (SER_RS485_ENABLED | SER_RS485_MODE_RS422 | SER_RS485_TERMINATE_BUS);
+ return;
}
rs485->flags &= supported_flags;
+ /* Pick sane settings if the user hasn't */
+ if (!(rs485->flags & SER_RS485_RTS_ON_SEND) ==
+ !(rs485->flags & SER_RS485_RTS_AFTER_SEND)) {
+ if (supported_flags & SER_RS485_RTS_ON_SEND) {
+ rs485->flags |= SER_RS485_RTS_ON_SEND;
+ rs485->flags &= ~SER_RS485_RTS_AFTER_SEND;
+
+ dev_warn_ratelimited(port->dev,
+ "%s (%d): invalid RTS setting, using RTS_ON_SEND instead\n",
+ port->name, port->line);
+ } else {
+ rs485->flags |= SER_RS485_RTS_AFTER_SEND;
+ rs485->flags &= ~SER_RS485_RTS_ON_SEND;
+
+ dev_warn_ratelimited(port->dev,
+ "%s (%d): invalid RTS setting, using RTS_AFTER_SEND instead\n",
+ port->name, port->line);
+ }
+ }
+
uart_sanitize_serial_rs485_delays(port, rs485);
/* Return clean padding area to userspace */
@@ -1402,6 +1415,16 @@ static void uart_set_rs485_termination(struct uart_port *port,
!!(rs485->flags & SER_RS485_TERMINATE_BUS));
}
+static void uart_set_rs485_rx_during_tx(struct uart_port *port,
+ const struct serial_rs485 *rs485)
+{
+ if (!(rs485->flags & SER_RS485_ENABLED))
+ return;
+
+ gpiod_set_value_cansleep(port->rs485_rx_during_tx_gpio,
+ !!(rs485->flags & SER_RS485_RX_DURING_TX));
+}
+
static int uart_rs485_config(struct uart_port *port)
{
struct serial_rs485 *rs485 = &port->rs485;
@@ -1413,12 +1436,17 @@ static int uart_rs485_config(struct uart_port *port)
uart_sanitize_serial_rs485(port, rs485);
uart_set_rs485_termination(port, rs485);
+ uart_set_rs485_rx_during_tx(port, rs485);
uart_port_lock_irqsave(port, &flags);
ret = port->rs485_config(port, NULL, rs485);
uart_port_unlock_irqrestore(port, flags);
- if (ret)
+ if (ret) {
memset(rs485, 0, sizeof(*rs485));
+ /* unset GPIOs */
+ gpiod_set_value_cansleep(port->rs485_term_gpio, 0);
+ gpiod_set_value_cansleep(port->rs485_rx_during_tx_gpio, 0);
+ }
return ret;
}
@@ -1446,7 +1474,7 @@ static int uart_set_rs485_config(struct tty_struct *tty, struct uart_port *port,
int ret;
unsigned long flags;
- if (!port->rs485_config)
+ if (!(port->rs485_supported.flags & SER_RS485_ENABLED))
return -ENOTTY;
if (copy_from_user(&rs485, rs485_user, sizeof(*rs485_user)))
@@ -1457,6 +1485,7 @@ static int uart_set_rs485_config(struct tty_struct *tty, struct uart_port *port,
return ret;
uart_sanitize_serial_rs485(port, &rs485);
uart_set_rs485_termination(port, &rs485);
+ uart_set_rs485_rx_during_tx(port, &rs485);
uart_port_lock_irqsave(port, &flags);
ret = port->rs485_config(port, &tty->termios, &rs485);
@@ -1468,8 +1497,14 @@ static int uart_set_rs485_config(struct tty_struct *tty, struct uart_port *port,
port->ops->set_mctrl(port, port->mctrl);
}
uart_port_unlock_irqrestore(port, flags);
- if (ret)
+ if (ret) {
+ /* restore old GPIO settings */
+ gpiod_set_value_cansleep(port->rs485_term_gpio,
+ !!(port->rs485.flags & SER_RS485_TERMINATE_BUS));
+ gpiod_set_value_cansleep(port->rs485_rx_during_tx_gpio,
+ !!(port->rs485.flags & SER_RS485_RX_DURING_TX));
return ret;
+ }
if (copy_to_user(rs485_user, &port->rs485, sizeof(port->rs485)))
return -EFAULT;
@@ -2342,7 +2377,7 @@ int uart_suspend_port(struct uart_driver *drv, struct uart_port *uport)
mutex_lock(&port->mutex);
- tty_dev = device_find_child(uport->dev, &match, serial_match_port);
+ tty_dev = device_find_child(&uport->port_dev->dev, &match, serial_match_port);
if (tty_dev && device_may_wakeup(tty_dev)) {
enable_irq_wake(uport->irq);
put_device(tty_dev);
@@ -2423,7 +2458,7 @@ int uart_resume_port(struct uart_driver *drv, struct uart_port *uport)
mutex_lock(&port->mutex);
- tty_dev = device_find_child(uport->dev, &match, serial_match_port);
+ tty_dev = device_find_child(&uport->port_dev->dev, &match, serial_match_port);
if (!uport->suspended && device_may_wakeup(tty_dev)) {
if (irqd_is_wakeup_set(irq_get_irq_data((uport->irq))))
disable_irq_wake(uport->irq);
@@ -2633,7 +2668,8 @@ static int uart_poll_init(struct tty_driver *driver, int line, char *options)
mutex_lock(&tport->mutex);
port = uart_port_check(state);
- if (!port || !(port->ops->poll_get_char && port->ops->poll_put_char)) {
+ if (!port || port->type == PORT_UNKNOWN ||
+ !(port->ops->poll_get_char && port->ops->poll_put_char)) {
ret = -1;
goto out;
}
@@ -3153,7 +3189,8 @@ static int serial_core_add_one_port(struct uart_driver *drv, struct uart_port *u
* setserial to be used to alter this port's parameters.
*/
tty_dev = tty_port_register_device_attr_serdev(port, drv->tty_driver,
- uport->line, uport->dev, port, uport->tty_groups);
+ uport->line, uport->dev, &uport->port_dev->dev, port,
+ uport->tty_groups);
if (!IS_ERR(tty_dev)) {
device_set_wakeup_capable(tty_dev, 1);
} else {
@@ -3570,6 +3607,9 @@ int uart_get_rs485_mode(struct uart_port *port)
u32 rs485_delay[2];
int ret;
+ if (!(port->rs485_supported.flags & SER_RS485_ENABLED))
+ return 0;
+
ret = device_property_read_u32_array(dev, "rs485-rts-delay",
rs485_delay, 2);
if (!ret) {
@@ -3620,6 +3660,8 @@ int uart_get_rs485_mode(struct uart_port *port)
if (IS_ERR(desc))
return dev_err_probe(dev, PTR_ERR(desc), "Cannot get rs485-rx-during-tx-gpios\n");
port->rs485_rx_during_tx_gpio = desc;
+ if (port->rs485_rx_during_tx_gpio)
+ port->rs485_supported.flags |= SER_RS485_RX_DURING_TX;
return 0;
}
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-30 15:16:14 +0300