summaryrefslogtreecommitdiff
path: root/drivers/tty/serial/8250
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/tty/serial/8250')
-rw-r--r--drivers/tty/serial/8250/8250_core.c2
-rw-r--r--drivers/tty/serial/8250/8250_dw.c80
-rw-r--r--drivers/tty/serial/8250/8250_em.c6
-rw-r--r--drivers/tty/serial/8250/8250_pci.c347
-rw-r--r--drivers/tty/serial/8250/Kconfig2
5 files changed, 390 insertions, 47 deletions
diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c
index 570df9d2a5d2..e33d38cb170f 100644
--- a/drivers/tty/serial/8250/8250_core.c
+++ b/drivers/tty/serial/8250/8250_core.c
@@ -2322,7 +2322,7 @@ serial8250_do_set_termios(struct uart_port *port, struct ktermios *termios,
if (up->capabilities & UART_CAP_FIFO && port->fifosize > 1) {
fcr = uart_config[port->type].fcr;
- if (baud < 2400 || fifo_bug) {
+ if ((baud < 2400 && !up->dma) || fifo_bug) {
fcr &= ~UART_FCR_TRIGGER_MASK;
fcr |= UART_FCR_TRIGGER_1;
}
diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c
index daf710f5c3fc..06525f10e364 100644
--- a/drivers/tty/serial/8250/8250_dw.c
+++ b/drivers/tty/serial/8250/8250_dw.c
@@ -56,11 +56,11 @@
struct dw8250_data {
- int last_lcr;
- int last_mcr;
- int line;
- struct clk *clk;
- u8 usr_reg;
+ u8 usr_reg;
+ int last_mcr;
+ int line;
+ struct clk *clk;
+ struct uart_8250_dma dma;
};
static inline int dw8250_modify_msr(struct uart_port *p, int offset, int value)
@@ -76,17 +76,34 @@ static inline int dw8250_modify_msr(struct uart_port *p, int offset, int value)
return value;
}
+static void dw8250_force_idle(struct uart_port *p)
+{
+ serial8250_clear_and_reinit_fifos(container_of
+ (p, struct uart_8250_port, port));
+ (void)p->serial_in(p, UART_RX);
+}
+
static void dw8250_serial_out(struct uart_port *p, int offset, int value)
{
struct dw8250_data *d = p->private_data;
- if (offset == UART_LCR)
- d->last_lcr = value;
-
if (offset == UART_MCR)
d->last_mcr = value;
writeb(value, p->membase + (offset << p->regshift));
+
+ /* Make sure LCR write wasn't ignored */
+ if (offset == UART_LCR) {
+ int tries = 1000;
+ while (tries--) {
+ unsigned int lcr = p->serial_in(p, UART_LCR);
+ if ((value & ~UART_LCR_SPAR) == (lcr & ~UART_LCR_SPAR))
+ return;
+ dw8250_force_idle(p);
+ writeb(value, p->membase + (UART_LCR << p->regshift));
+ }
+ dev_err(p->dev, "Couldn't set LCR to %d\n", value);
+ }
}
static unsigned int dw8250_serial_in(struct uart_port *p, int offset)
@@ -107,13 +124,23 @@ static void dw8250_serial_out32(struct uart_port *p, int offset, int value)
{
struct dw8250_data *d = p->private_data;
- if (offset == UART_LCR)
- d->last_lcr = value;
-
if (offset == UART_MCR)
d->last_mcr = value;
writel(value, p->membase + (offset << p->regshift));
+
+ /* Make sure LCR write wasn't ignored */
+ if (offset == UART_LCR) {
+ int tries = 1000;
+ while (tries--) {
+ unsigned int lcr = p->serial_in(p, UART_LCR);
+ if ((value & ~UART_LCR_SPAR) == (lcr & ~UART_LCR_SPAR))
+ return;
+ dw8250_force_idle(p);
+ writel(value, p->membase + (UART_LCR << p->regshift));
+ }
+ dev_err(p->dev, "Couldn't set LCR to %d\n", value);
+ }
}
static unsigned int dw8250_serial_in32(struct uart_port *p, int offset)
@@ -131,9 +158,8 @@ static int dw8250_handle_irq(struct uart_port *p)
if (serial8250_handle_irq(p, iir)) {
return 1;
} else if ((iir & UART_IIR_BUSY) == UART_IIR_BUSY) {
- /* Clear the USR and write the LCR again. */
+ /* Clear the USR */
(void)p->serial_in(p, d->usr_reg);
- p->serial_out(p, UART_LCR, d->last_lcr);
return 1;
}
@@ -153,6 +179,14 @@ dw8250_do_pm(struct uart_port *port, unsigned int state, unsigned int old)
pm_runtime_put_sync_suspend(port->dev);
}
+static bool dw8250_dma_filter(struct dma_chan *chan, void *param)
+{
+ struct dw8250_data *data = param;
+
+ return chan->chan_id == data->dma.tx_chan_id ||
+ chan->chan_id == data->dma.rx_chan_id;
+}
+
static void dw8250_setup_port(struct uart_8250_port *up)
{
struct uart_port *p = &up->port;
@@ -241,7 +275,8 @@ static int dw8250_probe_of(struct uart_port *p,
}
#ifdef CONFIG_ACPI
-static int dw8250_probe_acpi(struct uart_8250_port *up)
+static int dw8250_probe_acpi(struct uart_8250_port *up,
+ struct dw8250_data *data)
{
const struct acpi_device_id *id;
struct uart_port *p = &up->port;
@@ -260,9 +295,7 @@ static int dw8250_probe_acpi(struct uart_8250_port *up)
if (!p->uartclk)
p->uartclk = (unsigned int)id->driver_data;
- up->dma = devm_kzalloc(p->dev, sizeof(*up->dma), GFP_KERNEL);
- if (!up->dma)
- return -ENOMEM;
+ up->dma = &data->dma;
up->dma->rxconf.src_maxburst = p->fifosize / 4;
up->dma->txconf.dst_maxburst = p->fifosize / 4;
@@ -270,7 +303,8 @@ static int dw8250_probe_acpi(struct uart_8250_port *up)
return 0;
}
#else
-static inline int dw8250_probe_acpi(struct uart_8250_port *up)
+static inline int dw8250_probe_acpi(struct uart_8250_port *up,
+ struct dw8250_data *data)
{
return -ENODEV;
}
@@ -314,6 +348,12 @@ static int dw8250_probe(struct platform_device *pdev)
uart.port.uartclk = clk_get_rate(data->clk);
}
+ data->dma.rx_chan_id = -1;
+ data->dma.tx_chan_id = -1;
+ data->dma.rx_param = data;
+ data->dma.tx_param = data;
+ data->dma.fn = dw8250_dma_filter;
+
uart.port.iotype = UPIO_MEM;
uart.port.serial_in = dw8250_serial_in;
uart.port.serial_out = dw8250_serial_out;
@@ -324,7 +364,7 @@ static int dw8250_probe(struct platform_device *pdev)
if (err)
return err;
} else if (ACPI_HANDLE(&pdev->dev)) {
- err = dw8250_probe_acpi(&uart);
+ err = dw8250_probe_acpi(&uart, data);
if (err)
return err;
} else {
@@ -417,6 +457,8 @@ MODULE_DEVICE_TABLE(of, dw8250_of_match);
static const struct acpi_device_id dw8250_acpi_match[] = {
{ "INT33C4", 0 },
{ "INT33C5", 0 },
+ { "INT3434", 0 },
+ { "INT3435", 0 },
{ "80860F0A", 0 },
{ },
};
diff --git a/drivers/tty/serial/8250/8250_em.c b/drivers/tty/serial/8250/8250_em.c
index 5f3bba12c159..d1a9078003bd 100644
--- a/drivers/tty/serial/8250/8250_em.c
+++ b/drivers/tty/serial/8250/8250_em.c
@@ -122,7 +122,7 @@ static int serial8250_em_probe(struct platform_device *pdev)
up.port.dev = &pdev->dev;
up.port.private_data = priv;
- clk_enable(priv->sclk);
+ clk_prepare_enable(priv->sclk);
up.port.uartclk = clk_get_rate(priv->sclk);
up.port.iotype = UPIO_MEM32;
@@ -134,7 +134,7 @@ static int serial8250_em_probe(struct platform_device *pdev)
ret = serial8250_register_8250_port(&up);
if (ret < 0) {
dev_err(&pdev->dev, "unable to register 8250 port\n");
- clk_disable(priv->sclk);
+ clk_disable_unprepare(priv->sclk);
return ret;
}
@@ -148,7 +148,7 @@ static int serial8250_em_remove(struct platform_device *pdev)
struct serial8250_em_priv *priv = platform_get_drvdata(pdev);
serial8250_unregister_port(priv->line);
- clk_disable(priv->sclk);
+ clk_disable_unprepare(priv->sclk);
return 0;
}
diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c
index c810da7c7a88..4697a514b80a 100644
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -9,6 +9,7 @@
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License.
*/
+#undef DEBUG
#include <linux/module.h>
#include <linux/init.h>
#include <linux/pci.h>
@@ -27,8 +28,6 @@
#include "8250.h"
-#undef SERIAL_DEBUG_PCI
-
/*
* init function returns:
* > 0 - number of ports
@@ -63,7 +62,7 @@ static int pci_default_setup(struct serial_private*,
static void moan_device(const char *str, struct pci_dev *dev)
{
- printk(KERN_WARNING
+ dev_err(&dev->dev,
"%s: %s\n"
"Please send the output of lspci -vv, this\n"
"message (0x%04x,0x%04x,0x%04x,0x%04x), the\n"
@@ -233,7 +232,7 @@ static int pci_inteli960ni_init(struct pci_dev *dev)
/* is firmware started? */
pci_read_config_dword(dev, 0x44, (void *)&oldval);
if (oldval == 0x00001000L) { /* RESET value */
- printk(KERN_DEBUG "Local i960 firmware missing");
+ dev_dbg(&dev->dev, "Local i960 firmware missing\n");
return -ENODEV;
}
return 0;
@@ -827,7 +826,7 @@ static int pci_netmos_9900_numports(struct pci_dev *dev)
if (sub_serports > 0) {
return sub_serports;
} else {
- printk(KERN_NOTICE "NetMos/Mostech serial driver ignoring port on ambiguous config.\n");
+ dev_err(&dev->dev, "NetMos/Mostech serial driver ignoring port on ambiguous config.\n");
return 0;
}
}
@@ -931,7 +930,7 @@ static int pci_ite887x_init(struct pci_dev *dev)
}
if (!inta_addr[i]) {
- printk(KERN_ERR "ite887x: could not find iobase\n");
+ dev_err(&dev->dev, "ite887x: could not find iobase\n");
return -ENODEV;
}
@@ -1024,9 +1023,9 @@ static int pci_oxsemi_tornado_init(struct pci_dev *dev)
/* Tornado device */
if (deviceID == 0x07000200) {
number_uarts = ioread8(p + 4);
- printk(KERN_DEBUG
+ dev_dbg(&dev->dev,
"%d ports detected on Oxford PCI Express device\n",
- number_uarts);
+ number_uarts);
}
pci_iounmap(dev, p);
return number_uarts;
@@ -1308,6 +1307,29 @@ static int pci_default_setup(struct serial_private *priv,
return setup_port(priv, port, bar, offset, board->reg_shift);
}
+static int pci_pericom_setup(struct serial_private *priv,
+ const struct pciserial_board *board,
+ struct uart_8250_port *port, int idx)
+{
+ unsigned int bar, offset = board->first_offset, maxnr;
+
+ bar = FL_GET_BASE(board->flags);
+ if (board->flags & FL_BASE_BARS)
+ bar += idx;
+ else
+ offset += idx * board->uart_offset;
+
+ maxnr = (pci_resource_len(priv->dev, bar) - board->first_offset) >>
+ (board->reg_shift + 3);
+
+ if (board->flags & FL_REGION_SZ_CAP && idx >= maxnr)
+ return 1;
+
+ port->port.uartclk = 14745600;
+
+ return setup_port(priv, port, bar, offset, board->reg_shift);
+}
+
static int
ce4100_serial_setup(struct serial_private *priv,
const struct pciserial_board *board,
@@ -1324,6 +1346,120 @@ ce4100_serial_setup(struct serial_private *priv,
return ret;
}
+#define PCI_DEVICE_ID_INTEL_BYT_UART1 0x0f0a
+#define PCI_DEVICE_ID_INTEL_BYT_UART2 0x0f0c
+
+#define BYT_PRV_CLK 0x800
+#define BYT_PRV_CLK_EN (1 << 0)
+#define BYT_PRV_CLK_M_VAL_SHIFT 1
+#define BYT_PRV_CLK_N_VAL_SHIFT 16
+#define BYT_PRV_CLK_UPDATE (1 << 31)
+
+#define BYT_GENERAL_REG 0x808
+#define BYT_GENERAL_DIS_RTS_N_OVERRIDE (1 << 3)
+
+#define BYT_TX_OVF_INT 0x820
+#define BYT_TX_OVF_INT_MASK (1 << 1)
+
+static void
+byt_set_termios(struct uart_port *p, struct ktermios *termios,
+ struct ktermios *old)
+{
+ unsigned int baud = tty_termios_baud_rate(termios);
+ unsigned int m = 6912;
+ unsigned int n = 15625;
+ u32 reg;
+
+ /* For baud rates 1M, 2M, 3M and 4M the dividers must be adjusted. */
+ if (baud == 1000000 || baud == 2000000 || baud == 4000000) {
+ m = 64;
+ n = 100;
+
+ p->uartclk = 64000000;
+ } else if (baud == 3000000) {
+ m = 48;
+ n = 100;
+
+ p->uartclk = 48000000;
+ } else {
+ p->uartclk = 44236800;
+ }
+
+ /* Reset the clock */
+ reg = (m << BYT_PRV_CLK_M_VAL_SHIFT) | (n << BYT_PRV_CLK_N_VAL_SHIFT);
+ writel(reg, p->membase + BYT_PRV_CLK);
+ reg |= BYT_PRV_CLK_EN | BYT_PRV_CLK_UPDATE;
+ writel(reg, p->membase + BYT_PRV_CLK);
+
+ /*
+ * If auto-handshake mechanism is not enabled,
+ * disable rts_n override
+ */
+ reg = readl(p->membase + BYT_GENERAL_REG);
+ reg &= ~BYT_GENERAL_DIS_RTS_N_OVERRIDE;
+ if (termios->c_cflag & CRTSCTS)
+ reg |= BYT_GENERAL_DIS_RTS_N_OVERRIDE;
+ writel(reg, p->membase + BYT_GENERAL_REG);
+
+ serial8250_do_set_termios(p, termios, old);
+}
+
+static bool byt_dma_filter(struct dma_chan *chan, void *param)
+{
+ return chan->chan_id == *(int *)param;
+}
+
+static int
+byt_serial_setup(struct serial_private *priv,
+ const struct pciserial_board *board,
+ struct uart_8250_port *port, int idx)
+{
+ struct uart_8250_dma *dma;
+ int ret;
+
+ dma = devm_kzalloc(port->port.dev, sizeof(*dma), GFP_KERNEL);
+ if (!dma)
+ return -ENOMEM;
+
+ switch (priv->dev->device) {
+ case PCI_DEVICE_ID_INTEL_BYT_UART1:
+ dma->rx_chan_id = 3;
+ dma->tx_chan_id = 2;
+ break;
+ case PCI_DEVICE_ID_INTEL_BYT_UART2:
+ dma->rx_chan_id = 5;
+ dma->tx_chan_id = 4;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ dma->rxconf.slave_id = dma->rx_chan_id;
+ dma->rxconf.src_maxburst = 16;
+
+ dma->txconf.slave_id = dma->tx_chan_id;
+ dma->txconf.dst_maxburst = 16;
+
+ dma->fn = byt_dma_filter;
+ dma->rx_param = &dma->rx_chan_id;
+ dma->tx_param = &dma->tx_chan_id;
+
+ ret = pci_default_setup(priv, board, port, idx);
+ port->port.iotype = UPIO_MEM;
+ port->port.type = PORT_16550A;
+ port->port.flags = (port->port.flags | UPF_FIXED_PORT | UPF_FIXED_TYPE);
+ port->port.set_termios = byt_set_termios;
+ port->port.fifosize = 64;
+ port->tx_loadsz = 64;
+ port->dma = dma;
+ port->capabilities = UART_CAP_FIFO | UART_CAP_AFE;
+
+ /* Disable Tx counter interrupts */
+ writel(BYT_TX_OVF_INT_MASK, port->port.membase + BYT_TX_OVF_INT);
+
+ return ret;
+}
+
static int
pci_omegapci_setup(struct serial_private *priv,
const struct pciserial_board *board,
@@ -1344,17 +1480,80 @@ pci_brcm_trumanage_setup(struct serial_private *priv,
return ret;
}
+static int pci_fintek_setup(struct serial_private *priv,
+ const struct pciserial_board *board,
+ struct uart_8250_port *port, int idx)
+{
+ struct pci_dev *pdev = priv->dev;
+ unsigned long base;
+ unsigned long iobase;
+ unsigned long ciobase = 0;
+ u8 config_base;
+
+ /*
+ * We are supposed to be able to read these from the PCI config space,
+ * but the values there don't seem to match what we need to use, so
+ * just use these hard-coded values for now, as they are correct.
+ */
+ switch (idx) {
+ case 0: iobase = 0xe000; config_base = 0x40; break;
+ case 1: iobase = 0xe008; config_base = 0x48; break;
+ case 2: iobase = 0xe010; config_base = 0x50; break;
+ case 3: iobase = 0xe018; config_base = 0x58; break;
+ case 4: iobase = 0xe020; config_base = 0x60; break;
+ case 5: iobase = 0xe028; config_base = 0x68; break;
+ case 6: iobase = 0xe030; config_base = 0x70; break;
+ case 7: iobase = 0xe038; config_base = 0x78; break;
+ case 8: iobase = 0xe040; config_base = 0x80; break;
+ case 9: iobase = 0xe048; config_base = 0x88; break;
+ case 10: iobase = 0xe050; config_base = 0x90; break;
+ case 11: iobase = 0xe058; config_base = 0x98; break;
+ default:
+ /* Unknown number of ports, get out of here */
+ return -EINVAL;
+ }
+
+ if (idx < 4) {
+ base = pci_resource_start(priv->dev, 3);
+ ciobase = (int)(base + (0x8 * idx));
+ }
+
+ dev_dbg(&pdev->dev, "%s: idx=%d iobase=0x%lx ciobase=0x%lx config_base=0x%2x\n",
+ __func__, idx, iobase, ciobase, config_base);
+
+ /* Enable UART I/O port */
+ pci_write_config_byte(pdev, config_base + 0x00, 0x01);
+
+ /* Select 128-byte FIFO and 8x FIFO threshold */
+ pci_write_config_byte(pdev, config_base + 0x01, 0x33);
+
+ /* LSB UART */
+ pci_write_config_byte(pdev, config_base + 0x04, (u8)(iobase & 0xff));
+
+ /* MSB UART */
+ pci_write_config_byte(pdev, config_base + 0x05, (u8)((iobase & 0xff00) >> 8));
+
+ /* irq number, this usually fails, but the spec says to do it anyway. */
+ pci_write_config_byte(pdev, config_base + 0x06, pdev->irq);
+
+ port->port.iotype = UPIO_PORT;
+ port->port.iobase = iobase;
+ port->port.mapbase = 0;
+ port->port.membase = NULL;
+ port->port.regshift = 0;
+
+ return 0;
+}
+
static int skip_tx_en_setup(struct serial_private *priv,
const struct pciserial_board *board,
struct uart_8250_port *port, int idx)
{
port->port.flags |= UPF_NO_TXEN_TEST;
- printk(KERN_DEBUG "serial8250: skipping TxEn test for device "
- "[%04x:%04x] subsystem [%04x:%04x]\n",
- priv->dev->vendor,
- priv->dev->device,
- priv->dev->subsystem_vendor,
- priv->dev->subsystem_device);
+ dev_dbg(&priv->dev->dev,
+ "serial8250: skipping TxEn test for device [%04x:%04x] subsystem [%04x:%04x]\n",
+ priv->dev->vendor, priv->dev->device,
+ priv->dev->subsystem_vendor, priv->dev->subsystem_device);
return pci_default_setup(priv, board, port, idx);
}
@@ -1662,6 +1861,20 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = {
.subdevice = PCI_ANY_ID,
.setup = kt_serial_setup,
},
+ {
+ .vendor = PCI_VENDOR_ID_INTEL,
+ .device = PCI_DEVICE_ID_INTEL_BYT_UART1,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = byt_serial_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_INTEL,
+ .device = PCI_DEVICE_ID_INTEL_BYT_UART2,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = byt_serial_setup,
+ },
/*
* ITE
*/
@@ -1826,6 +2039,31 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = {
.exit = pci_plx9050_exit,
},
/*
+ * Pericom
+ */
+ {
+ .vendor = 0x12d8,
+ .device = 0x7952,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = pci_pericom_setup,
+ },
+ {
+ .vendor = 0x12d8,
+ .device = 0x7954,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = pci_pericom_setup,
+ },
+ {
+ .vendor = 0x12d8,
+ .device = 0x7958,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = pci_pericom_setup,
+ },
+
+ /*
* PLX
*/
{
@@ -2255,6 +2493,27 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = {
.subdevice = PCI_ANY_ID,
.setup = pci_brcm_trumanage_setup,
},
+ {
+ .vendor = 0x1c29,
+ .device = 0x1104,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = pci_fintek_setup,
+ },
+ {
+ .vendor = 0x1c29,
+ .device = 0x1108,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = pci_fintek_setup,
+ },
+ {
+ .vendor = 0x1c29,
+ .device = 0x1112,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = pci_fintek_setup,
+ },
/*
* Default "match everything" terminator entry
@@ -2449,9 +2708,13 @@ enum pci_board_num_t {
pbn_ADDIDATA_PCIe_4_3906250,
pbn_ADDIDATA_PCIe_8_3906250,
pbn_ce4100_1_115200,
+ pbn_byt,
pbn_omegapci,
pbn_NETMOS9900_2s_115200,
pbn_brcm_trumanage,
+ pbn_fintek_4,
+ pbn_fintek_8,
+ pbn_fintek_12,
};
/*
@@ -3185,6 +3448,13 @@ static struct pciserial_board pci_boards[] = {
.base_baud = 921600,
.reg_shift = 2,
},
+ [pbn_byt] = {
+ .flags = FL_BASE0,
+ .num_ports = 1,
+ .base_baud = 2764800,
+ .uart_offset = 0x80,
+ .reg_shift = 2,
+ },
[pbn_omegapci] = {
.flags = FL_BASE0,
.num_ports = 8,
@@ -3202,6 +3472,24 @@ static struct pciserial_board pci_boards[] = {
.reg_shift = 2,
.base_baud = 115200,
},
+ [pbn_fintek_4] = {
+ .num_ports = 4,
+ .uart_offset = 8,
+ .base_baud = 115200,
+ .first_offset = 0x40,
+ },
+ [pbn_fintek_8] = {
+ .num_ports = 8,
+ .uart_offset = 8,
+ .base_baud = 115200,
+ .first_offset = 0x40,
+ },
+ [pbn_fintek_12] = {
+ .num_ports = 12,
+ .uart_offset = 8,
+ .base_baud = 115200,
+ .first_offset = 0x40,
+ },
};
static const struct pci_device_id blacklist[] = {
@@ -3362,14 +3650,15 @@ pciserial_init_ports(struct pci_dev *dev, const struct pciserial_board *board)
if (quirk->setup(priv, board, &uart, i))
break;
-#ifdef SERIAL_DEBUG_PCI
- printk(KERN_DEBUG "Setup PCI port: port %lx, irq %d, type %d\n",
- uart.port.iobase, uart.port.irq, uart.port.iotype);
-#endif
+ dev_dbg(&dev->dev, "Setup PCI port: port %lx, irq %d, type %d\n",
+ uart.port.iobase, uart.port.irq, uart.port.iotype);
priv->line[i] = serial8250_register_8250_port(&uart);
if (priv->line[i] < 0) {
- printk(KERN_WARNING "Couldn't register serial port %s: %d\n", pci_name(dev), priv->line[i]);
+ dev_err(&dev->dev,
+ "Couldn't register serial port %lx, irq %d, type %d, error %d\n",
+ uart.port.iobase, uart.port.irq,
+ uart.port.iotype, priv->line[i]);
break;
}
}
@@ -3462,7 +3751,7 @@ pciserial_init_one(struct pci_dev *dev, const struct pci_device_id *ent)
}
if (ent->driver_data >= ARRAY_SIZE(pci_boards)) {
- printk(KERN_ERR "pci_init_one: invalid driver_data: %ld\n",
+ dev_err(&dev->dev, "invalid driver_data: %ld\n",
ent->driver_data);
return -EINVAL;
}
@@ -3520,8 +3809,6 @@ static void pciserial_remove_one(struct pci_dev *dev)
{
struct serial_private *priv = pci_get_drvdata(dev);
- pci_set_drvdata(dev, NULL);
-
pciserial_remove_ports(priv);
pci_disable_device(dev);
@@ -3555,7 +3842,7 @@ static int pciserial_resume_one(struct pci_dev *dev)
err = pci_enable_device(dev);
/* FIXME: We cannot simply error out here */
if (err)
- printk(KERN_ERR "pciserial: Unable to re-enable ports, trying to continue.\n");
+ dev_err(&dev->dev, "Unable to re-enable ports, trying to continue.\n");
pciserial_resume_ports(priv);
}
return 0;
@@ -4848,6 +5135,15 @@ static struct pci_device_id serial_pci_tbl[] = {
{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_CE4100_UART,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_ce4100_1_115200 },
+ /* Intel BayTrail */
+ { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BYT_UART1,
+ PCI_ANY_ID, PCI_ANY_ID,
+ PCI_CLASS_COMMUNICATION_SERIAL << 8, 0xff0000,
+ pbn_byt },
+ { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BYT_UART2,
+ PCI_ANY_ID, PCI_ANY_ID,
+ PCI_CLASS_COMMUNICATION_SERIAL << 8, 0xff0000,
+ pbn_byt },
/*
* Cronyx Omega PCI
@@ -4918,6 +5214,11 @@ static struct pci_device_id serial_pci_tbl[] = {
0,
0, pbn_exar_XR17V358 },
+ /* Fintek PCI serial cards */
+ { PCI_DEVICE(0x1c29, 0x1104), .driver_data = pbn_fintek_4 },
+ { PCI_DEVICE(0x1c29, 0x1108), .driver_data = pbn_fintek_8 },
+ { PCI_DEVICE(0x1c29, 0x1112), .driver_data = pbn_fintek_12 },
+
/*
* These entries match devices with class COMMUNICATION_SERIAL,
* COMMUNICATION_MODEM or COMMUNICATION_MULTISERIAL
diff --git a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig
index f3b306efaa59..23329918f229 100644
--- a/drivers/tty/serial/8250/Kconfig
+++ b/drivers/tty/serial/8250/Kconfig
@@ -41,7 +41,7 @@ config SERIAL_8250_DEPRECATED_OPTIONS
accept kernel parameters in both forms like 8250_core.nr_uarts=4 and
8250.nr_uarts=4. We now renamed the module back to 8250, but if
anybody noticed in 3.7 and changed their userspace we still have to
- keep the 8350_core.* options around until they revert the changes
+ keep the 8250_core.* options around until they revert the changes
they already did.
If 8250 is built as a module, this adds 8250_core alias instead.
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-27 05:40:26 +0300