summaryrefslogtreecommitdiff
path: root/drivers/tty/rocket_int.h
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/tty/rocket_int.h')
-rw-r--r--drivers/tty/rocket_int.h1214
1 files changed, 0 insertions, 1214 deletions
diff --git a/drivers/tty/rocket_int.h b/drivers/tty/rocket_int.h
deleted file mode 100644
index 727e50dbb92f..000000000000
--- a/drivers/tty/rocket_int.h
+++ /dev/null
@@ -1,1214 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * rocket_int.h --- internal header file for rocket.c
- *
- * Written by Theodore Ts'o, Copyright 1997.
- * Copyright 1997 Comtrol Corporation.
- *
- */
-
-/*
- * Definition of the types in rcktpt_type
- */
-#define ROCKET_TYPE_NORMAL 0
-#define ROCKET_TYPE_MODEM 1
-#define ROCKET_TYPE_MODEMII 2
-#define ROCKET_TYPE_MODEMIII 3
-#define ROCKET_TYPE_PC104 4
-
-#include <linux/mutex.h>
-
-#include <asm/io.h>
-#include <asm/byteorder.h>
-
-typedef unsigned char Byte_t;
-typedef unsigned int ByteIO_t;
-
-typedef unsigned int Word_t;
-typedef unsigned int WordIO_t;
-
-typedef unsigned int DWordIO_t;
-
-/*
- * Note! Normally the Linux I/O macros already take care of
- * byte-swapping the I/O instructions. However, all accesses using
- * sOutDW aren't really 32-bit accesses, but should be handled in byte
- * order. Hence the use of the cpu_to_le32() macro to byte-swap
- * things to no-op the byte swapping done by the big-endian outl()
- * instruction.
- */
-
-static inline void sOutB(unsigned short port, unsigned char value)
-{
-#ifdef ROCKET_DEBUG_IO
- printk(KERN_DEBUG "sOutB(%x, %x)...\n", port, value);
-#endif
- outb_p(value, port);
-}
-
-static inline void sOutW(unsigned short port, unsigned short value)
-{
-#ifdef ROCKET_DEBUG_IO
- printk(KERN_DEBUG "sOutW(%x, %x)...\n", port, value);
-#endif
- outw_p(value, port);
-}
-
-static inline void out32(unsigned short port, Byte_t *p)
-{
- u32 value = get_unaligned_le32(p);
-#ifdef ROCKET_DEBUG_IO
- printk(KERN_DEBUG "out32(%x, %lx)...\n", port, value);
-#endif
- outl_p(value, port);
-}
-
-static inline unsigned char sInB(unsigned short port)
-{
- return inb_p(port);
-}
-
-static inline unsigned short sInW(unsigned short port)
-{
- return inw_p(port);
-}
-
-/* This is used to move arrays of bytes so byte swapping isn't appropriate. */
-#define sOutStrW(port, addr, count) if (count) outsw(port, addr, count)
-#define sInStrW(port, addr, count) if (count) insw(port, addr, count)
-
-#define CTL_SIZE 8
-#define AIOP_CTL_SIZE 4
-#define CHAN_AIOP_SIZE 8
-#define MAX_PORTS_PER_AIOP 8
-#define MAX_AIOPS_PER_BOARD 4
-#define MAX_PORTS_PER_BOARD 32
-
-/* Bus type ID */
-#define isISA 0
-#define isPCI 1
-#define isMC 2
-
-/* Controller ID numbers */
-#define CTLID_NULL -1 /* no controller exists */
-#define CTLID_0001 0x0001 /* controller release 1 */
-
-/* AIOP ID numbers, identifies AIOP type implementing channel */
-#define AIOPID_NULL -1 /* no AIOP or channel exists */
-#define AIOPID_0001 0x0001 /* AIOP release 1 */
-
-/************************************************************************
- Global Register Offsets - Direct Access - Fixed values
-************************************************************************/
-
-#define _CMD_REG 0x38 /* Command Register 8 Write */
-#define _INT_CHAN 0x39 /* Interrupt Channel Register 8 Read */
-#define _INT_MASK 0x3A /* Interrupt Mask Register 8 Read / Write */
-#define _UNUSED 0x3B /* Unused 8 */
-#define _INDX_ADDR 0x3C /* Index Register Address 16 Write */
-#define _INDX_DATA 0x3E /* Index Register Data 8/16 Read / Write */
-
-/************************************************************************
- Channel Register Offsets for 1st channel in AIOP - Direct Access
-************************************************************************/
-#define _TD0 0x00 /* Transmit Data 16 Write */
-#define _RD0 0x00 /* Receive Data 16 Read */
-#define _CHN_STAT0 0x20 /* Channel Status 8/16 Read / Write */
-#define _FIFO_CNT0 0x10 /* Transmit/Receive FIFO Count 16 Read */
-#define _INT_ID0 0x30 /* Interrupt Identification 8 Read */
-
-/************************************************************************
- Tx Control Register Offsets - Indexed - External - Fixed
-************************************************************************/
-#define _TX_ENBLS 0x980 /* Tx Processor Enables Register 8 Read / Write */
-#define _TXCMP1 0x988 /* Transmit Compare Value #1 8 Read / Write */
-#define _TXCMP2 0x989 /* Transmit Compare Value #2 8 Read / Write */
-#define _TXREP1B1 0x98A /* Tx Replace Value #1 - Byte 1 8 Read / Write */
-#define _TXREP1B2 0x98B /* Tx Replace Value #1 - Byte 2 8 Read / Write */
-#define _TXREP2 0x98C /* Transmit Replace Value #2 8 Read / Write */
-
-/************************************************************************
-Memory Controller Register Offsets - Indexed - External - Fixed
-************************************************************************/
-#define _RX_FIFO 0x000 /* Rx FIFO */
-#define _TX_FIFO 0x800 /* Tx FIFO */
-#define _RXF_OUTP 0x990 /* Rx FIFO OUT pointer 16 Read / Write */
-#define _RXF_INP 0x992 /* Rx FIFO IN pointer 16 Read / Write */
-#define _TXF_OUTP 0x994 /* Tx FIFO OUT pointer 8 Read / Write */
-#define _TXF_INP 0x995 /* Tx FIFO IN pointer 8 Read / Write */
-#define _TXP_CNT 0x996 /* Tx Priority Count 8 Read / Write */
-#define _TXP_PNTR 0x997 /* Tx Priority Pointer 8 Read / Write */
-
-#define PRI_PEND 0x80 /* Priority data pending (bit7, Tx pri cnt) */
-#define TXFIFO_SIZE 255 /* size of Tx FIFO */
-#define RXFIFO_SIZE 1023 /* size of Rx FIFO */
-
-/************************************************************************
-Tx Priority Buffer - Indexed - External - Fixed
-************************************************************************/
-#define _TXP_BUF 0x9C0 /* Tx Priority Buffer 32 Bytes Read / Write */
-#define TXP_SIZE 0x20 /* 32 bytes */
-
-/************************************************************************
-Channel Register Offsets - Indexed - Internal - Fixed
-************************************************************************/
-
-#define _TX_CTRL 0xFF0 /* Transmit Control 16 Write */
-#define _RX_CTRL 0xFF2 /* Receive Control 8 Write */
-#define _BAUD 0xFF4 /* Baud Rate 16 Write */
-#define _CLK_PRE 0xFF6 /* Clock Prescaler 8 Write */
-
-#define STMBREAK 0x08 /* BREAK */
-#define STMFRAME 0x04 /* framing error */
-#define STMRCVROVR 0x02 /* receiver over run error */
-#define STMPARITY 0x01 /* parity error */
-#define STMERROR (STMBREAK | STMFRAME | STMPARITY)
-#define STMBREAKH 0x800 /* BREAK */
-#define STMFRAMEH 0x400 /* framing error */
-#define STMRCVROVRH 0x200 /* receiver over run error */
-#define STMPARITYH 0x100 /* parity error */
-#define STMERRORH (STMBREAKH | STMFRAMEH | STMPARITYH)
-
-#define CTS_ACT 0x20 /* CTS input asserted */
-#define DSR_ACT 0x10 /* DSR input asserted */
-#define CD_ACT 0x08 /* CD input asserted */
-#define TXFIFOMT 0x04 /* Tx FIFO is empty */
-#define TXSHRMT 0x02 /* Tx shift register is empty */
-#define RDA 0x01 /* Rx data available */
-#define DRAINED (TXFIFOMT | TXSHRMT) /* indicates Tx is drained */
-
-#define STATMODE 0x8000 /* status mode enable bit */
-#define RXFOVERFL 0x2000 /* receive FIFO overflow */
-#define RX2MATCH 0x1000 /* receive compare byte 2 match */
-#define RX1MATCH 0x0800 /* receive compare byte 1 match */
-#define RXBREAK 0x0400 /* received BREAK */
-#define RXFRAME 0x0200 /* received framing error */
-#define RXPARITY 0x0100 /* received parity error */
-#define STATERROR (RXBREAK | RXFRAME | RXPARITY)
-
-#define CTSFC_EN 0x80 /* CTS flow control enable bit */
-#define RTSTOG_EN 0x40 /* RTS toggle enable bit */
-#define TXINT_EN 0x10 /* transmit interrupt enable */
-#define STOP2 0x08 /* enable 2 stop bits (0 = 1 stop) */
-#define PARITY_EN 0x04 /* enable parity (0 = no parity) */
-#define EVEN_PAR 0x02 /* even parity (0 = odd parity) */
-#define DATA8BIT 0x01 /* 8 bit data (0 = 7 bit data) */
-
-#define SETBREAK 0x10 /* send break condition (must clear) */
-#define LOCALLOOP 0x08 /* local loopback set for test */
-#define SET_DTR 0x04 /* assert DTR */
-#define SET_RTS 0x02 /* assert RTS */
-#define TX_ENABLE 0x01 /* enable transmitter */
-
-#define RTSFC_EN 0x40 /* RTS flow control enable */
-#define RXPROC_EN 0x20 /* receive processor enable */
-#define TRIG_NO 0x00 /* Rx FIFO trigger level 0 (no trigger) */
-#define TRIG_1 0x08 /* trigger level 1 char */
-#define TRIG_1_2 0x10 /* trigger level 1/2 */
-#define TRIG_7_8 0x18 /* trigger level 7/8 */
-#define TRIG_MASK 0x18 /* trigger level mask */
-#define SRCINT_EN 0x04 /* special Rx condition interrupt enable */
-#define RXINT_EN 0x02 /* Rx interrupt enable */
-#define MCINT_EN 0x01 /* modem change interrupt enable */
-
-#define RXF_TRIG 0x20 /* Rx FIFO trigger level interrupt */
-#define TXFIFO_MT 0x10 /* Tx FIFO empty interrupt */
-#define SRC_INT 0x08 /* special receive condition interrupt */
-#define DELTA_CD 0x04 /* CD change interrupt */
-#define DELTA_CTS 0x02 /* CTS change interrupt */
-#define DELTA_DSR 0x01 /* DSR change interrupt */
-
-#define REP1W2_EN 0x10 /* replace byte 1 with 2 bytes enable */
-#define IGN2_EN 0x08 /* ignore byte 2 enable */
-#define IGN1_EN 0x04 /* ignore byte 1 enable */
-#define COMP2_EN 0x02 /* compare byte 2 enable */
-#define COMP1_EN 0x01 /* compare byte 1 enable */
-
-#define RESET_ALL 0x80 /* reset AIOP (all channels) */
-#define TXOVERIDE 0x40 /* Transmit software off override */
-#define RESETUART 0x20 /* reset channel's UART */
-#define RESTXFCNT 0x10 /* reset channel's Tx FIFO count register */
-#define RESRXFCNT 0x08 /* reset channel's Rx FIFO count register */
-
-#define INTSTAT0 0x01 /* AIOP 0 interrupt status */
-#define INTSTAT1 0x02 /* AIOP 1 interrupt status */
-#define INTSTAT2 0x04 /* AIOP 2 interrupt status */
-#define INTSTAT3 0x08 /* AIOP 3 interrupt status */
-
-#define INTR_EN 0x08 /* allow interrupts to host */
-#define INT_STROB 0x04 /* strobe and clear interrupt line (EOI) */
-
-/**************************************************************************
- MUDBAC remapped for PCI
-**************************************************************************/
-
-#define _CFG_INT_PCI 0x40
-#define _PCI_INT_FUNC 0x3A
-
-#define PCI_STROB 0x2000 /* bit 13 of int aiop register */
-#define INTR_EN_PCI 0x0010 /* allow interrupts to host */
-
-/*
- * Definitions for Universal PCI board registers
- */
-#define _PCI_9030_INT_CTRL 0x4c /* Offsets from BAR1 */
-#define _PCI_9030_GPIO_CTRL 0x54
-#define PCI_INT_CTRL_AIOP 0x0001
-#define PCI_GPIO_CTRL_8PORT 0x4000
-#define _PCI_9030_RING_IND 0xc0 /* Offsets from BAR1 */
-
-#define CHAN3_EN 0x08 /* enable AIOP 3 */
-#define CHAN2_EN 0x04 /* enable AIOP 2 */
-#define CHAN1_EN 0x02 /* enable AIOP 1 */
-#define CHAN0_EN 0x01 /* enable AIOP 0 */
-#define FREQ_DIS 0x00
-#define FREQ_274HZ 0x60
-#define FREQ_137HZ 0x50
-#define FREQ_69HZ 0x40
-#define FREQ_34HZ 0x30
-#define FREQ_17HZ 0x20
-#define FREQ_9HZ 0x10
-#define PERIODIC_ONLY 0x80 /* only PERIODIC interrupt */
-
-#define CHANINT_EN 0x0100 /* flags to enable/disable channel ints */
-
-#define RDATASIZE 72
-#define RREGDATASIZE 52
-
-/*
- * AIOP interrupt bits for ISA/PCI boards and UPCI boards.
- */
-#define AIOP_INTR_BIT_0 0x0001
-#define AIOP_INTR_BIT_1 0x0002
-#define AIOP_INTR_BIT_2 0x0004
-#define AIOP_INTR_BIT_3 0x0008
-
-#define AIOP_INTR_BITS ( \
- AIOP_INTR_BIT_0 \
- | AIOP_INTR_BIT_1 \
- | AIOP_INTR_BIT_2 \
- | AIOP_INTR_BIT_3)
-
-#define UPCI_AIOP_INTR_BIT_0 0x0004
-#define UPCI_AIOP_INTR_BIT_1 0x0020
-#define UPCI_AIOP_INTR_BIT_2 0x0100
-#define UPCI_AIOP_INTR_BIT_3 0x0800
-
-#define UPCI_AIOP_INTR_BITS ( \
- UPCI_AIOP_INTR_BIT_0 \
- | UPCI_AIOP_INTR_BIT_1 \
- | UPCI_AIOP_INTR_BIT_2 \
- | UPCI_AIOP_INTR_BIT_3)
-
-/* Controller level information structure */
-typedef struct {
- int CtlID;
- int CtlNum;
- int BusType;
- int boardType;
- int isUPCI;
- WordIO_t PCIIO;
- WordIO_t PCIIO2;
- ByteIO_t MBaseIO;
- ByteIO_t MReg1IO;
- ByteIO_t MReg2IO;
- ByteIO_t MReg3IO;
- Byte_t MReg2;
- Byte_t MReg3;
- int NumAiop;
- int AltChanRingIndicator;
- ByteIO_t UPCIRingInd;
- WordIO_t AiopIO[AIOP_CTL_SIZE];
- ByteIO_t AiopIntChanIO[AIOP_CTL_SIZE];
- int AiopID[AIOP_CTL_SIZE];
- int AiopNumChan[AIOP_CTL_SIZE];
- Word_t *AiopIntrBits;
-} CONTROLLER_T;
-
-typedef CONTROLLER_T CONTROLLER_t;
-
-/* Channel level information structure */
-typedef struct {
- CONTROLLER_T *CtlP;
- int AiopNum;
- int ChanID;
- int ChanNum;
- int rtsToggle;
-
- ByteIO_t Cmd;
- ByteIO_t IntChan;
- ByteIO_t IntMask;
- DWordIO_t IndexAddr;
- WordIO_t IndexData;
-
- WordIO_t TxRxData;
- WordIO_t ChanStat;
- WordIO_t TxRxCount;
- ByteIO_t IntID;
-
- Word_t TxFIFO;
- Word_t TxFIFOPtrs;
- Word_t RxFIFO;
- Word_t RxFIFOPtrs;
- Word_t TxPrioCnt;
- Word_t TxPrioPtr;
- Word_t TxPrioBuf;
-
- Byte_t R[RREGDATASIZE];
-
- Byte_t BaudDiv[4];
- Byte_t TxControl[4];
- Byte_t RxControl[4];
- Byte_t TxEnables[4];
- Byte_t TxCompare[4];
- Byte_t TxReplace1[4];
- Byte_t TxReplace2[4];
-} CHANNEL_T;
-
-typedef CHANNEL_T CHANNEL_t;
-typedef CHANNEL_T *CHANPTR_T;
-
-#define InterfaceModeRS232 0x00
-#define InterfaceModeRS422 0x08
-#define InterfaceModeRS485 0x10
-#define InterfaceModeRS232T 0x18
-
-/***************************************************************************
-Function: sClrBreak
-Purpose: Stop sending a transmit BREAK signal
-Call: sClrBreak(ChP)
- CHANNEL_T *ChP; Ptr to channel structure
-*/
-#define sClrBreak(ChP) \
-do { \
- (ChP)->TxControl[3] &= ~SETBREAK; \
- out32((ChP)->IndexAddr,(ChP)->TxControl); \
-} while (0)
-
-/***************************************************************************
-Function: sClrDTR
-Purpose: Clr the DTR output
-Call: sClrDTR(ChP)
- CHANNEL_T *ChP; Ptr to channel structure
-*/
-#define sClrDTR(ChP) \
-do { \
- (ChP)->TxControl[3] &= ~SET_DTR; \
- out32((ChP)->IndexAddr,(ChP)->TxControl); \
-} while (0)
-
-/***************************************************************************
-Function: sClrRTS
-Purpose: Clr the RTS output
-Call: sClrRTS(ChP)
- CHANNEL_T *ChP; Ptr to channel structure
-*/
-#define sClrRTS(ChP) \
-do { \
- if ((ChP)->rtsToggle) break; \
- (ChP)->TxControl[3] &= ~SET_RTS; \
- out32((ChP)->IndexAddr,(ChP)->TxControl); \
-} while (0)
-
-/***************************************************************************
-Function: sClrTxXOFF
-Purpose: Clear any existing transmit software flow control off condition
-Call: sClrTxXOFF(ChP)
- CHANNEL_T *ChP; Ptr to channel structure
-*/
-#define sClrTxXOFF(ChP) \
-do { \
- sOutB((ChP)->Cmd,TXOVERIDE | (Byte_t)(ChP)->ChanNum); \
- sOutB((ChP)->Cmd,(Byte_t)(ChP)->ChanNum); \
-} while (0)
-
-/***************************************************************************
-Function: sCtlNumToCtlPtr
-Purpose: Convert a controller number to controller structure pointer
-Call: sCtlNumToCtlPtr(CtlNum)
- int CtlNum; Controller number
-Return: CONTROLLER_T *: Ptr to controller structure
-*/
-#define sCtlNumToCtlPtr(CTLNUM) &sController[CTLNUM]
-
-/***************************************************************************
-Function: sControllerEOI
-Purpose: Strobe the MUDBAC's End Of Interrupt bit.
-Call: sControllerEOI(CtlP)
- CONTROLLER_T *CtlP; Ptr to controller structure
-*/
-#define sControllerEOI(CTLP) sOutB((CTLP)->MReg2IO,(CTLP)->MReg2 | INT_STROB)
-
-/***************************************************************************
-Function: sPCIControllerEOI
-Purpose: Strobe the PCI End Of Interrupt bit.
- For the UPCI boards, toggle the AIOP interrupt enable bit
- (this was taken from the Windows driver).
-Call: sPCIControllerEOI(CtlP)
- CONTROLLER_T *CtlP; Ptr to controller structure
-*/
-#define sPCIControllerEOI(CTLP) \
-do { \
- if ((CTLP)->isUPCI) { \
- Word_t w = sInW((CTLP)->PCIIO); \
- sOutW((CTLP)->PCIIO, (w ^ PCI_INT_CTRL_AIOP)); \
- sOutW((CTLP)->PCIIO, w); \
- } \
- else { \
- sOutW((CTLP)->PCIIO, PCI_STROB); \
- } \
-} while (0)
-
-/***************************************************************************
-Function: sDisAiop
-Purpose: Disable I/O access to an AIOP
-Call: sDisAiop(CltP)
- CONTROLLER_T *CtlP; Ptr to controller structure
- int AiopNum; Number of AIOP on controller
-*/
-#define sDisAiop(CTLP,AIOPNUM) \
-do { \
- (CTLP)->MReg3 &= sBitMapClrTbl[AIOPNUM]; \
- sOutB((CTLP)->MReg3IO,(CTLP)->MReg3); \
-} while (0)
-
-/***************************************************************************
-Function: sDisCTSFlowCtl
-Purpose: Disable output flow control using CTS
-Call: sDisCTSFlowCtl(ChP)
- CHANNEL_T *ChP; Ptr to channel structure
-*/
-#define sDisCTSFlowCtl(ChP) \
-do { \
- (ChP)->TxControl[2] &= ~CTSFC_EN; \
- out32((ChP)->IndexAddr,(ChP)->TxControl); \
-} while (0)
-
-/***************************************************************************
-Function: sDisIXANY
-Purpose: Disable IXANY Software Flow Control
-Call: sDisIXANY(ChP)
- CHANNEL_T *ChP; Ptr to channel structure
-*/
-#define sDisIXANY(ChP) \
-do { \
- (ChP)->R[0x0e] = 0x86; \
- out32((ChP)->IndexAddr,&(ChP)->R[0x0c]); \
-} while (0)
-
-/***************************************************************************
-Function: DisParity
-Purpose: Disable parity
-Call: sDisParity(ChP)
- CHANNEL_T *ChP; Ptr to channel structure
-Comments: Function sSetParity() can be used in place of functions sEnParity(),
- sDisParity(), sSetOddParity(), and sSetEvenParity().
-*/
-#define sDisParity(ChP) \
-do { \
- (ChP)->TxControl[2] &= ~PARITY_EN; \
- out32((ChP)->IndexAddr,(ChP)->TxControl); \
-} while (0)
-
-/***************************************************************************
-Function: sDisRTSToggle
-Purpose: Disable RTS toggle
-Call: sDisRTSToggle(ChP)
- CHANNEL_T *ChP; Ptr to channel structure
-*/
-#define sDisRTSToggle(ChP) \
-do { \
- (ChP)->TxControl[2] &= ~RTSTOG_EN; \
- out32((ChP)->IndexAddr,(ChP)->TxControl); \
- (ChP)->rtsToggle = 0; \
-} while (0)
-
-/***************************************************************************
-Function: sDisRxFIFO
-Purpose: Disable Rx FIFO
-Call: sDisRxFIFO(ChP)
- CHANNEL_T *ChP; Ptr to channel structure
-*/
-#define sDisRxFIFO(ChP) \
-do { \
- (ChP)->R[0x32] = 0x0a; \
- out32((ChP)->IndexAddr,&(ChP)->R[0x30]); \
-} while (0)
-
-/***************************************************************************
-Function: sDisRxStatusMode
-Purpose: Disable the Rx status mode
-Call: sDisRxStatusMode(ChP)
- CHANNEL_T *ChP; Ptr to channel structure
-Comments: This takes the channel out of the receive status mode. All
- subsequent reads of receive data using sReadRxWord() will return
- two data bytes.
-*/
-#define sDisRxStatusMode(ChP) sOutW((ChP)->ChanStat,0)
-
-/***************************************************************************
-Function: sDisTransmit
-Purpose: Disable transmit
-Call: sDisTransmit(ChP)
- CHANNEL_T *ChP; Ptr to channel structure
- This disables movement of Tx data from the Tx FIFO into the 1 byte
- Tx buffer. Therefore there could be up to a 2 byte latency
- between the time sDisTransmit() is called and the transmit buffer
- and transmit shift register going completely empty.
-*/
-#define sDisTransmit(ChP) \
-do { \
- (ChP)->TxControl[3] &= ~TX_ENABLE; \
- out32((ChP)->IndexAddr,(ChP)->TxControl); \
-} while (0)
-
-/***************************************************************************
-Function: sDisTxSoftFlowCtl
-Purpose: Disable Tx Software Flow Control
-Call: sDisTxSoftFlowCtl(ChP)
- CHANNEL_T *ChP; Ptr to channel structure
-*/
-#define sDisTxSoftFlowCtl(ChP) \
-do { \
- (ChP)->R[0x06] = 0x8a; \
- out32((ChP)->IndexAddr,&(ChP)->R[0x04]); \
-} while (0)
-
-/***************************************************************************
-Function: sEnAiop
-Purpose: Enable I/O access to an AIOP
-Call: sEnAiop(CltP)
- CONTROLLER_T *CtlP; Ptr to controller structure
- int AiopNum; Number of AIOP on controller
-*/
-#define sEnAiop(CTLP,AIOPNUM) \
-do { \
- (CTLP)->MReg3 |= sBitMapSetTbl[AIOPNUM]; \
- sOutB((CTLP)->MReg3IO,(CTLP)->MReg3); \
-} while (0)
-
-/***************************************************************************
-Function: sEnCTSFlowCtl
-Purpose: Enable output flow control using CTS
-Call: sEnCTSFlowCtl(ChP)
- CHANNEL_T *ChP; Ptr to channel structure
-*/
-#define sEnCTSFlowCtl(ChP) \
-do { \
- (ChP)->TxControl[2] |= CTSFC_EN; \
- out32((ChP)->IndexAddr,(ChP)->TxControl); \
-} while (0)
-
-/***************************************************************************
-Function: sEnIXANY
-Purpose: Enable IXANY Software Flow Control
-Call: sEnIXANY(ChP)
- CHANNEL_T *ChP; Ptr to channel structure
-*/
-#define sEnIXANY(ChP) \
-do { \
- (ChP)->R[0x0e] = 0x21; \
- out32((ChP)->IndexAddr,&(ChP)->R[0x0c]); \
-} while (0)
-
-/***************************************************************************
-Function: EnParity
-Purpose: Enable parity
-Call: sEnParity(ChP)
- CHANNEL_T *ChP; Ptr to channel structure
-Comments: Function sSetParity() can be used in place of functions sEnParity(),
- sDisParity(), sSetOddParity(), and sSetEvenParity().
-
-Warnings: Before enabling parity odd or even parity should be chosen using
- functions sSetOddParity() or sSetEvenParity().
-*/
-#define sEnParity(ChP) \
-do { \
- (ChP)->TxControl[2] |= PARITY_EN; \
- out32((ChP)->IndexAddr,(ChP)->TxControl); \
-} while (0)
-
-/***************************************************************************
-Function: sEnRTSToggle
-Purpose: Enable RTS toggle
-Call: sEnRTSToggle(ChP)
- CHANNEL_T *ChP; Ptr to channel structure
-Comments: This function will disable RTS flow control and clear the RTS
- line to allow operation of RTS toggle.
-*/
-#define sEnRTSToggle(ChP) \
-do { \
- (ChP)->RxControl[2] &= ~RTSFC_EN; \
- out32((ChP)->IndexAddr,(ChP)->RxControl); \
- (ChP)->TxControl[2] |= RTSTOG_EN; \
- (ChP)->TxControl[3] &= ~SET_RTS; \
- out32((ChP)->IndexAddr,(ChP)->TxControl); \
- (ChP)->rtsToggle = 1; \
-} while (0)
-
-/***************************************************************************
-Function: sEnRxFIFO
-Purpose: Enable Rx FIFO
-Call: sEnRxFIFO(ChP)
- CHANNEL_T *ChP; Ptr to channel structure
-*/
-#define sEnRxFIFO(ChP) \
-do { \
- (ChP)->R[0x32] = 0x08; \
- out32((ChP)->IndexAddr,&(ChP)->R[0x30]); \
-} while (0)
-
-/***************************************************************************
-Function: sEnRxProcessor
-Purpose: Enable the receive processor
-Call: sEnRxProcessor(ChP)
- CHANNEL_T *ChP; Ptr to channel structure
-Comments: This function is used to start the receive processor. When
- the channel is in the reset state the receive processor is not
- running. This is done to prevent the receive processor from
- executing invalid microcode instructions prior to the
- downloading of the microcode.
-
-Warnings: This function must be called after valid microcode has been
- downloaded to the AIOP, and it must not be called before the
- microcode has been downloaded.
-*/
-#define sEnRxProcessor(ChP) \
-do { \
- (ChP)->RxControl[2] |= RXPROC_EN; \
- out32((ChP)->IndexAddr,(ChP)->RxControl); \
-} while (0)
-
-/***************************************************************************
-Function: sEnRxStatusMode
-Purpose: Enable the Rx status mode
-Call: sEnRxStatusMode(ChP)
- CHANNEL_T *ChP; Ptr to channel structure
-Comments: This places the channel in the receive status mode. All subsequent
- reads of receive data using sReadRxWord() will return a data byte
- in the low word and a status byte in the high word.
-
-*/
-#define sEnRxStatusMode(ChP) sOutW((ChP)->ChanStat,STATMODE)
-
-/***************************************************************************
-Function: sEnTransmit
-Purpose: Enable transmit
-Call: sEnTransmit(ChP)
- CHANNEL_T *ChP; Ptr to channel structure
-*/
-#define sEnTransmit(ChP) \
-do { \
- (ChP)->TxControl[3] |= TX_ENABLE; \
- out32((ChP)->IndexAddr,(ChP)->TxControl); \
-} while (0)
-
-/***************************************************************************
-Function: sEnTxSoftFlowCtl
-Purpose: Enable Tx Software Flow Control
-Call: sEnTxSoftFlowCtl(ChP)
- CHANNEL_T *ChP; Ptr to channel structure
-*/
-#define sEnTxSoftFlowCtl(ChP) \
-do { \
- (ChP)->R[0x06] = 0xc5; \
- out32((ChP)->IndexAddr,&(ChP)->R[0x04]); \
-} while (0)
-
-/***************************************************************************
-Function: sGetAiopIntStatus
-Purpose: Get the AIOP interrupt status
-Call: sGetAiopIntStatus(CtlP,AiopNum)
- CONTROLLER_T *CtlP; Ptr to controller structure
- int AiopNum; AIOP number
-Return: Byte_t: The AIOP interrupt status. Bits 0 through 7
- represent channels 0 through 7 respectively. If a
- bit is set that channel is interrupting.
-*/
-#define sGetAiopIntStatus(CTLP,AIOPNUM) sInB((CTLP)->AiopIntChanIO[AIOPNUM])
-
-/***************************************************************************
-Function: sGetAiopNumChan
-Purpose: Get the number of channels supported by an AIOP
-Call: sGetAiopNumChan(CtlP,AiopNum)
- CONTROLLER_T *CtlP; Ptr to controller structure
- int AiopNum; AIOP number
-Return: int: The number of channels supported by the AIOP
-*/
-#define sGetAiopNumChan(CTLP,AIOPNUM) (CTLP)->AiopNumChan[AIOPNUM]
-
-/***************************************************************************
-Function: sGetChanIntID
-Purpose: Get a channel's interrupt identification byte
-Call: sGetChanIntID(ChP)
- CHANNEL_T *ChP; Ptr to channel structure
-Return: Byte_t: The channel interrupt ID. Can be any
- combination of the following flags:
- RXF_TRIG: Rx FIFO trigger level interrupt
- TXFIFO_MT: Tx FIFO empty interrupt
- SRC_INT: Special receive condition interrupt
- DELTA_CD: CD change interrupt
- DELTA_CTS: CTS change interrupt
- DELTA_DSR: DSR change interrupt
-*/
-#define sGetChanIntID(ChP) (sInB((ChP)->IntID) & (RXF_TRIG | TXFIFO_MT | SRC_INT | DELTA_CD | DELTA_CTS | DELTA_DSR))
-
-/***************************************************************************
-Function: sGetChanNum
-Purpose: Get the number of a channel within an AIOP
-Call: sGetChanNum(ChP)
- CHANNEL_T *ChP; Ptr to channel structure
-Return: int: Channel number within AIOP, or NULLCHAN if channel does
- not exist.
-*/
-#define sGetChanNum(ChP) (ChP)->ChanNum
-
-/***************************************************************************
-Function: sGetChanStatus
-Purpose: Get the channel status
-Call: sGetChanStatus(ChP)
- CHANNEL_T *ChP; Ptr to channel structure
-Return: Word_t: The channel status. Can be any combination of
- the following flags:
- LOW BYTE FLAGS
- CTS_ACT: CTS input asserted
- DSR_ACT: DSR input asserted
- CD_ACT: CD input asserted
- TXFIFOMT: Tx FIFO is empty
- TXSHRMT: Tx shift register is empty
- RDA: Rx data available
-
- HIGH BYTE FLAGS
- STATMODE: status mode enable bit
- RXFOVERFL: receive FIFO overflow
- RX2MATCH: receive compare byte 2 match
- RX1MATCH: receive compare byte 1 match
- RXBREAK: received BREAK
- RXFRAME: received framing error
- RXPARITY: received parity error
-Warnings: This function will clear the high byte flags in the Channel
- Status Register.
-*/
-#define sGetChanStatus(ChP) sInW((ChP)->ChanStat)
-
-/***************************************************************************
-Function: sGetChanStatusLo
-Purpose: Get the low byte only of the channel status
-Call: sGetChanStatusLo(ChP)
- CHANNEL_T *ChP; Ptr to channel structure
-Return: Byte_t: The channel status low byte. Can be any combination
- of the following flags:
- CTS_ACT: CTS input asserted
- DSR_ACT: DSR input asserted
- CD_ACT: CD input asserted
- TXFIFOMT: Tx FIFO is empty
- TXSHRMT: Tx shift register is empty
- RDA: Rx data available
-*/
-#define sGetChanStatusLo(ChP) sInB((ByteIO_t)(ChP)->ChanStat)
-
-/**********************************************************************
- * Get RI status of channel
- * Defined as a function in rocket.c -aes
- */
-#if 0
-#define sGetChanRI(ChP) ((ChP)->CtlP->AltChanRingIndicator ? \
- (sInB((ByteIO_t)((ChP)->ChanStat+8)) & DSR_ACT) : \
- (((ChP)->CtlP->boardType == ROCKET_TYPE_PC104) ? \
- (!(sInB((ChP)->CtlP->AiopIO[3]) & sBitMapSetTbl[(ChP)->ChanNum])) : \
- 0))
-#endif
-
-/***************************************************************************
-Function: sGetControllerIntStatus
-Purpose: Get the controller interrupt status
-Call: sGetControllerIntStatus(CtlP)
- CONTROLLER_T *CtlP; Ptr to controller structure
-Return: Byte_t: The controller interrupt status in the lower 4
- bits. Bits 0 through 3 represent AIOP's 0
- through 3 respectively. If a bit is set that
- AIOP is interrupting. Bits 4 through 7 will
- always be cleared.
-*/
-#define sGetControllerIntStatus(CTLP) (sInB((CTLP)->MReg1IO) & 0x0f)
-
-/***************************************************************************
-Function: sPCIGetControllerIntStatus
-Purpose: Get the controller interrupt status
-Call: sPCIGetControllerIntStatus(CtlP)
- CONTROLLER_T *CtlP; Ptr to controller structure
-Return: unsigned char: The controller interrupt status in the lower 4
- bits and bit 4. Bits 0 through 3 represent AIOP's 0
- through 3 respectively. Bit 4 is set if the int
- was generated from periodic. If a bit is set the
- AIOP is interrupting.
-*/
-#define sPCIGetControllerIntStatus(CTLP) \
- ((CTLP)->isUPCI ? \
- (sInW((CTLP)->PCIIO2) & UPCI_AIOP_INTR_BITS) : \
- ((sInW((CTLP)->PCIIO) >> 8) & AIOP_INTR_BITS))
-
-/***************************************************************************
-
-Function: sGetRxCnt
-Purpose: Get the number of data bytes in the Rx FIFO
-Call: sGetRxCnt(ChP)
- CHANNEL_T *ChP; Ptr to channel structure
-Return: int: The number of data bytes in the Rx FIFO.
-Comments: Byte read of count register is required to obtain Rx count.
-
-*/
-#define sGetRxCnt(ChP) sInW((ChP)->TxRxCount)
-
-/***************************************************************************
-Function: sGetTxCnt
-Purpose: Get the number of data bytes in the Tx FIFO
-Call: sGetTxCnt(ChP)
- CHANNEL_T *ChP; Ptr to channel structure
-Return: Byte_t: The number of data bytes in the Tx FIFO.
-Comments: Byte read of count register is required to obtain Tx count.
-
-*/
-#define sGetTxCnt(ChP) sInB((ByteIO_t)(ChP)->TxRxCount)
-
-/*****************************************************************************
-Function: sGetTxRxDataIO
-Purpose: Get the I/O address of a channel's TxRx Data register
-Call: sGetTxRxDataIO(ChP)
- CHANNEL_T *ChP; Ptr to channel structure
-Return: WordIO_t: I/O address of a channel's TxRx Data register
-*/
-#define sGetTxRxDataIO(ChP) (ChP)->TxRxData
-
-/***************************************************************************
-Function: sInitChanDefaults
-Purpose: Initialize a channel structure to it's default state.
-Call: sInitChanDefaults(ChP)
- CHANNEL_T *ChP; Ptr to the channel structure
-Comments: This function must be called once for every channel structure
- that exists before any other SSCI calls can be made.
-
-*/
-#define sInitChanDefaults(ChP) \
-do { \
- (ChP)->CtlP = NULLCTLPTR; \
- (ChP)->AiopNum = NULLAIOP; \
- (ChP)->ChanID = AIOPID_NULL; \
- (ChP)->ChanNum = NULLCHAN; \
-} while (0)
-
-/***************************************************************************
-Function: sResetAiopByNum
-Purpose: Reset the AIOP by number
-Call: sResetAiopByNum(CTLP,AIOPNUM)
- CONTROLLER_T CTLP; Ptr to controller structure
- AIOPNUM; AIOP index
-*/
-#define sResetAiopByNum(CTLP,AIOPNUM) \
-do { \
- sOutB((CTLP)->AiopIO[(AIOPNUM)]+_CMD_REG,RESET_ALL); \
- sOutB((CTLP)->AiopIO[(AIOPNUM)]+_CMD_REG,0x0); \
-} while (0)
-
-/***************************************************************************
-Function: sSendBreak
-Purpose: Send a transmit BREAK signal
-Call: sSendBreak(ChP)
- CHANNEL_T *ChP; Ptr to channel structure
-*/
-#define sSendBreak(ChP) \
-do { \
- (ChP)->TxControl[3] |= SETBREAK; \
- out32((ChP)->IndexAddr,(ChP)->TxControl); \
-} while (0)
-
-/***************************************************************************
-Function: sSetBaud
-Purpose: Set baud rate
-Call: sSetBaud(ChP,Divisor)
- CHANNEL_T *ChP; Ptr to channel structure
- Word_t Divisor; 16 bit baud rate divisor for channel
-*/
-#define sSetBaud(ChP,DIVISOR) \
-do { \
- (ChP)->BaudDiv[2] = (Byte_t)(DIVISOR); \
- (ChP)->BaudDiv[3] = (Byte_t)((DIVISOR) >> 8); \
- out32((ChP)->IndexAddr,(ChP)->BaudDiv); \
-} while (0)
-
-/***************************************************************************
-Function: sSetData7
-Purpose: Set data bits to 7
-Call: sSetData7(ChP)
- CHANNEL_T *ChP; Ptr to channel structure
-*/
-#define sSetData7(ChP) \
-do { \
- (ChP)->TxControl[2] &= ~DATA8BIT; \
- out32((ChP)->IndexAddr,(ChP)->TxControl); \
-} while (0)
-
-/***************************************************************************
-Function: sSetData8
-Purpose: Set data bits to 8
-Call: sSetData8(ChP)
- CHANNEL_T *ChP; Ptr to channel structure
-*/
-#define sSetData8(ChP) \
-do { \
- (ChP)->TxControl[2] |= DATA8BIT; \
- out32((ChP)->IndexAddr,(ChP)->TxControl); \
-} while (0)
-
-/***************************************************************************
-Function: sSetDTR
-Purpose: Set the DTR output
-Call: sSetDTR(ChP)
- CHANNEL_T *ChP; Ptr to channel structure
-*/
-#define sSetDTR(ChP) \
-do { \
- (ChP)->TxControl[3] |= SET_DTR; \
- out32((ChP)->IndexAddr,(ChP)->TxControl); \
-} while (0)
-
-/***************************************************************************
-Function: sSetEvenParity
-Purpose: Set even parity
-Call: sSetEvenParity(ChP)
- CHANNEL_T *ChP; Ptr to channel structure
-Comments: Function sSetParity() can be used in place of functions sEnParity(),
- sDisParity(), sSetOddParity(), and sSetEvenParity().
-
-Warnings: This function has no effect unless parity is enabled with function
- sEnParity().
-*/
-#define sSetEvenParity(ChP) \
-do { \
- (ChP)->TxControl[2] |= EVEN_PAR; \
- out32((ChP)->IndexAddr,(ChP)->TxControl); \
-} while (0)
-
-/***************************************************************************
-Function: sSetOddParity
-Purpose: Set odd parity
-Call: sSetOddParity(ChP)
- CHANNEL_T *ChP; Ptr to channel structure
-Comments: Function sSetParity() can be used in place of functions sEnParity(),
- sDisParity(), sSetOddParity(), and sSetEvenParity().
-
-Warnings: This function has no effect unless parity is enabled with function
- sEnParity().
-*/
-#define sSetOddParity(ChP) \
-do { \
- (ChP)->TxControl[2] &= ~EVEN_PAR; \
- out32((ChP)->IndexAddr,(ChP)->TxControl); \
-} while (0)
-
-/***************************************************************************
-Function: sSetRTS
-Purpose: Set the RTS output
-Call: sSetRTS(ChP)
- CHANNEL_T *ChP; Ptr to channel structure
-*/
-#define sSetRTS(ChP) \
-do { \
- if ((ChP)->rtsToggle) break; \
- (ChP)->TxControl[3] |= SET_RTS; \
- out32((ChP)->IndexAddr,(ChP)->TxControl); \
-} while (0)
-
-/***************************************************************************
-Function: sSetRxTrigger
-Purpose: Set the Rx FIFO trigger level
-Call: sSetRxProcessor(ChP,Level)
- CHANNEL_T *ChP; Ptr to channel structure
- Byte_t Level; Number of characters in Rx FIFO at which the
- interrupt will be generated. Can be any of the following flags:
-
- TRIG_NO: no trigger
- TRIG_1: 1 character in FIFO
- TRIG_1_2: FIFO 1/2 full
- TRIG_7_8: FIFO 7/8 full
-Comments: An interrupt will be generated when the trigger level is reached
- only if function sEnInterrupt() has been called with flag
- RXINT_EN set. The RXF_TRIG flag in the Interrupt Idenfification
- register will be set whenever the trigger level is reached
- regardless of the setting of RXINT_EN.
-
-*/
-#define sSetRxTrigger(ChP,LEVEL) \
-do { \
- (ChP)->RxControl[2] &= ~TRIG_MASK; \
- (ChP)->RxControl[2] |= LEVEL; \
- out32((ChP)->IndexAddr,(ChP)->RxControl); \
-} while (0)
-
-/***************************************************************************
-Function: sSetStop1
-Purpose: Set stop bits to 1
-Call: sSetStop1(ChP)
- CHANNEL_T *ChP; Ptr to channel structure
-*/
-#define sSetStop1(ChP) \
-do { \
- (ChP)->TxControl[2] &= ~STOP2; \
- out32((ChP)->IndexAddr,(ChP)->TxControl); \
-} while (0)
-
-/***************************************************************************
-Function: sSetStop2
-Purpose: Set stop bits to 2
-Call: sSetStop2(ChP)
- CHANNEL_T *ChP; Ptr to channel structure
-*/
-#define sSetStop2(ChP) \
-do { \
- (ChP)->TxControl[2] |= STOP2; \
- out32((ChP)->IndexAddr,(ChP)->TxControl); \
-} while (0)
-
-/***************************************************************************
-Function: sSetTxXOFFChar
-Purpose: Set the Tx XOFF flow control character
-Call: sSetTxXOFFChar(ChP,Ch)
- CHANNEL_T *ChP; Ptr to channel structure
- Byte_t Ch; The value to set the Tx XOFF character to
-*/
-#define sSetTxXOFFChar(ChP,CH) \
-do { \
- (ChP)->R[0x07] = (CH); \
- out32((ChP)->IndexAddr,&(ChP)->R[0x04]); \
-} while (0)
-
-/***************************************************************************
-Function: sSetTxXONChar
-Purpose: Set the Tx XON flow control character
-Call: sSetTxXONChar(ChP,Ch)
- CHANNEL_T *ChP; Ptr to channel structure
- Byte_t Ch; The value to set the Tx XON character to
-*/
-#define sSetTxXONChar(ChP,CH) \
-do { \
- (ChP)->R[0x0b] = (CH); \
- out32((ChP)->IndexAddr,&(ChP)->R[0x08]); \
-} while (0)
-
-/***************************************************************************
-Function: sStartRxProcessor
-Purpose: Start a channel's receive processor
-Call: sStartRxProcessor(ChP)
- CHANNEL_T *ChP; Ptr to channel structure
-Comments: This function is used to start a Rx processor after it was
- stopped with sStopRxProcessor() or sStopSWInFlowCtl(). It
- will restart both the Rx processor and software input flow control.
-
-*/
-#define sStartRxProcessor(ChP) out32((ChP)->IndexAddr,&(ChP)->R[0])
-
-/***************************************************************************
-Function: sWriteTxByte
-Purpose: Write a transmit data byte to a channel.
- ByteIO_t io: Channel transmit register I/O address. This can
- be obtained with sGetTxRxDataIO().
- Byte_t Data; The transmit data byte.
-Warnings: This function writes the data byte without checking to see if
- sMaxTxSize is exceeded in the Tx FIFO.
-*/
-#define sWriteTxByte(IO,DATA) sOutB(IO,DATA)
-
-/*
- * Begin Linux specific definitions for the Rocketport driver
- *
- * This code is Copyright Theodore Ts'o, 1995-1997
- */
-
-struct r_port {
- int magic;
- struct tty_port port;
- int line;
- int flags; /* Don't yet match the ASY_ flags!! */
- unsigned int board:3;
- unsigned int aiop:2;
- unsigned int chan:3;
- CONTROLLER_t *ctlp;
- CHANNEL_t channel;
- int intmask;
- int xmit_fifo_room; /* room in xmit fifo */
- unsigned char *xmit_buf;
- int xmit_head;
- int xmit_tail;
- int xmit_cnt;
- int cd_status;
- int ignore_status_mask;
- int read_status_mask;
- int cps;
-
- spinlock_t slock;
- struct mutex write_mtx;
-};
-
-#define RPORT_MAGIC 0x525001
-
-#define NUM_BOARDS 8
-#define MAX_RP_PORTS (32*NUM_BOARDS)
-
-/*
- * The size of the xmit buffer is 1 page, or 4096 bytes
- */
-#define XMIT_BUF_SIZE 4096
-
-/* number of characters left in xmit buffer before we ask for more */
-#define WAKEUP_CHARS 256
-
-/*
- * Assigned major numbers for the Comtrol Rocketport
- */
-#define TTY_ROCKET_MAJOR 46
-#define CUA_ROCKET_MAJOR 47
-
-#ifdef PCI_VENDOR_ID_RP
-#undef PCI_VENDOR_ID_RP
-#undef PCI_DEVICE_ID_RP8OCTA
-#undef PCI_DEVICE_ID_RP8INTF
-#undef PCI_DEVICE_ID_RP16INTF
-#undef PCI_DEVICE_ID_RP32INTF
-#undef PCI_DEVICE_ID_URP8OCTA
-#undef PCI_DEVICE_ID_URP8INTF
-#undef PCI_DEVICE_ID_URP16INTF
-#undef PCI_DEVICE_ID_CRP16INTF
-#undef PCI_DEVICE_ID_URP32INTF
-#endif
-
-/* Comtrol PCI Vendor ID */
-#define PCI_VENDOR_ID_RP 0x11fe
-
-/* Comtrol Device ID's */
-#define PCI_DEVICE_ID_RP32INTF 0x0001 /* Rocketport 32 port w/external I/F */
-#define PCI_DEVICE_ID_RP8INTF 0x0002 /* Rocketport 8 port w/external I/F */
-#define PCI_DEVICE_ID_RP16INTF 0x0003 /* Rocketport 16 port w/external I/F */
-#define PCI_DEVICE_ID_RP4QUAD 0x0004 /* Rocketport 4 port w/quad cable */
-#define PCI_DEVICE_ID_RP8OCTA 0x0005 /* Rocketport 8 port w/octa cable */
-#define PCI_DEVICE_ID_RP8J 0x0006 /* Rocketport 8 port w/RJ11 connectors */
-#define PCI_DEVICE_ID_RP4J 0x0007 /* Rocketport 4 port w/RJ11 connectors */
-#define PCI_DEVICE_ID_RP8SNI 0x0008 /* Rocketport 8 port w/ DB78 SNI (Siemens) connector */
-#define PCI_DEVICE_ID_RP16SNI 0x0009 /* Rocketport 16 port w/ DB78 SNI (Siemens) connector */
-#define PCI_DEVICE_ID_RPP4 0x000A /* Rocketport Plus 4 port */
-#define PCI_DEVICE_ID_RPP8 0x000B /* Rocketport Plus 8 port */
-#define PCI_DEVICE_ID_RP6M 0x000C /* RocketModem 6 port */
-#define PCI_DEVICE_ID_RP4M 0x000D /* RocketModem 4 port */
-#define PCI_DEVICE_ID_RP2_232 0x000E /* Rocketport Plus 2 port RS232 */
-#define PCI_DEVICE_ID_RP2_422 0x000F /* Rocketport Plus 2 port RS422 */
-
-/* Universal PCI boards */
-#define PCI_DEVICE_ID_URP32INTF 0x0801 /* Rocketport UPCI 32 port w/external I/F */
-#define PCI_DEVICE_ID_URP8INTF 0x0802 /* Rocketport UPCI 8 port w/external I/F */
-#define PCI_DEVICE_ID_URP16INTF 0x0803 /* Rocketport UPCI 16 port w/external I/F */
-#define PCI_DEVICE_ID_URP8OCTA 0x0805 /* Rocketport UPCI 8 port w/octa cable */
-#define PCI_DEVICE_ID_UPCI_RM3_8PORT 0x080C /* Rocketmodem III 8 port */
-#define PCI_DEVICE_ID_UPCI_RM3_4PORT 0x080D /* Rocketmodem III 4 port */
-
-/* Compact PCI device */
-#define PCI_DEVICE_ID_CRP16INTF 0x0903 /* Rocketport Compact PCI 16 port w/external I/F */
-
generated by cgit v1.2.3 (git 2.39.0) at 2025-10-31 19:21:25 +0300