diff options
Diffstat (limited to 'drivers/thunderbolt')
| -rw-r--r-- | drivers/thunderbolt/switch.c | 35 | ||||
| -rw-r--r-- | drivers/thunderbolt/tb.c | 154 | ||||
| -rw-r--r-- | drivers/thunderbolt/tb.h | 15 | ||||
| -rw-r--r-- | drivers/thunderbolt/tb_regs.h | 9 | ||||
| -rw-r--r-- | drivers/thunderbolt/tunnel.c | 158 | ||||
| -rw-r--r-- | drivers/thunderbolt/tunnel.h | 9 | ||||
| -rw-r--r-- | drivers/thunderbolt/usb4.c | 42 |
7 files changed, 395 insertions, 27 deletions
diff --git a/drivers/thunderbolt/switch.c b/drivers/thunderbolt/switch.c index 82f45780dc81..3454e6154958 100644 --- a/drivers/thunderbolt/switch.c +++ b/drivers/thunderbolt/switch.c @@ -1042,12 +1042,47 @@ bool tb_port_is_enabled(struct tb_port *port) case TB_TYPE_DP_HDMI_OUT: return tb_dp_port_is_enabled(port); + case TB_TYPE_USB3_UP: + case TB_TYPE_USB3_DOWN: + return tb_usb3_port_is_enabled(port); + default: return false; } } /** + * tb_usb3_port_is_enabled() - Is the USB3 adapter port enabled + * @port: USB3 adapter port to check + */ +bool tb_usb3_port_is_enabled(struct tb_port *port) +{ + u32 data; + + if (tb_port_read(port, &data, TB_CFG_PORT, + port->cap_adap + ADP_USB3_CS_0, 1)) + return false; + + return !!(data & ADP_USB3_CS_0_PE); +} + +/** + * tb_usb3_port_enable() - Enable USB3 adapter port + * @port: USB3 adapter port to enable + * @enable: Enable/disable the USB3 adapter + */ +int tb_usb3_port_enable(struct tb_port *port, bool enable) +{ + u32 word = enable ? (ADP_USB3_CS_0_PE | ADP_USB3_CS_0_V) + : ADP_USB3_CS_0_V; + + if (!port->cap_adap) + return -ENXIO; + return tb_port_write(port, &word, TB_CFG_PORT, + port->cap_adap + ADP_USB3_CS_0, 1); +} + +/** * tb_pci_port_is_enabled() - Is the PCIe adapter port enabled * @port: PCIe port to check */ diff --git a/drivers/thunderbolt/tb.c b/drivers/thunderbolt/tb.c index e446624dd3e7..107cd232f486 100644 --- a/drivers/thunderbolt/tb.c +++ b/drivers/thunderbolt/tb.c @@ -111,6 +111,10 @@ static void tb_discover_tunnels(struct tb_switch *sw) tunnel = tb_tunnel_discover_pci(tb, port); break; + case TB_TYPE_USB3_DOWN: + tunnel = tb_tunnel_discover_usb3(tb, port); + break; + default: break; } @@ -177,6 +181,118 @@ static int tb_enable_tmu(struct tb_switch *sw) return tb_switch_tmu_enable(sw); } +/** + * tb_find_unused_port() - return the first inactive port on @sw + * @sw: Switch to find the port on + * @type: Port type to look for + */ +static struct tb_port *tb_find_unused_port(struct tb_switch *sw, + enum tb_port_type type) +{ + struct tb_port *port; + + tb_switch_for_each_port(sw, port) { + if (tb_is_upstream_port(port)) + continue; + if (port->config.type != type) + continue; + if (!port->cap_adap) + continue; + if (tb_port_is_enabled(port)) + continue; + return port; + } + return NULL; +} + +static struct tb_port *tb_find_usb3_down(struct tb_switch *sw, + const struct tb_port *port) +{ + struct tb_port *down; + + down = usb4_switch_map_usb3_down(sw, port); + if (down) { + if (WARN_ON(!tb_port_is_usb3_down(down))) + goto out; + if (WARN_ON(tb_usb3_port_is_enabled(down))) + goto out; + + return down; + } + +out: + return tb_find_unused_port(sw, TB_TYPE_USB3_DOWN); +} + +static int tb_tunnel_usb3(struct tb *tb, struct tb_switch *sw) +{ + struct tb_switch *parent = tb_switch_parent(sw); + struct tb_port *up, *down, *port; + struct tb_cm *tcm = tb_priv(tb); + struct tb_tunnel *tunnel; + + up = tb_switch_find_port(sw, TB_TYPE_USB3_UP); + if (!up) + return 0; + + /* + * Look up available down port. Since we are chaining it should + * be found right above this switch. + */ + port = tb_port_at(tb_route(sw), parent); + down = tb_find_usb3_down(parent, port); + if (!down) + return 0; + + if (tb_route(parent)) { + struct tb_port *parent_up; + /* + * Check first that the parent switch has its upstream USB3 + * port enabled. Otherwise the chain is not complete and + * there is no point setting up a new tunnel. + */ + parent_up = tb_switch_find_port(parent, TB_TYPE_USB3_UP); + if (!parent_up || !tb_port_is_enabled(parent_up)) + return 0; + } + + tunnel = tb_tunnel_alloc_usb3(tb, up, down); + if (!tunnel) + return -ENOMEM; + + if (tb_tunnel_activate(tunnel)) { + tb_port_info(up, + "USB3 tunnel activation failed, aborting\n"); + tb_tunnel_free(tunnel); + return -EIO; + } + + list_add_tail(&tunnel->list, &tcm->tunnel_list); + return 0; +} + +static int tb_create_usb3_tunnels(struct tb_switch *sw) +{ + struct tb_port *port; + int ret; + + if (tb_route(sw)) { + ret = tb_tunnel_usb3(sw->tb, sw); + if (ret) + return ret; + } + + tb_switch_for_each_port(sw, port) { + if (!tb_port_has_remote(port)) + continue; + ret = tb_create_usb3_tunnels(port->remote->sw); + if (ret) + return ret; + } + + return 0; +} + static void tb_scan_port(struct tb_port *port); /** @@ -279,6 +395,15 @@ static void tb_scan_port(struct tb_port *port) if (tb_enable_tmu(sw)) tb_sw_warn(sw, "failed to enable TMU\n"); + /* + * Create USB 3.x tunnels only when the switch is plugged to the + * domain. This is because we scan the domain also during discovery + * and want to discover existing USB 3.x tunnels before we create + * any new. + */ + if (tcm->hotplug_active && tb_tunnel_usb3(sw->tb, sw)) + tb_sw_warn(sw, "USB3 tunnel creation failed\n"); + tb_scan_switch(sw); } @@ -360,30 +485,6 @@ static void tb_free_unplugged_children(struct tb_switch *sw) } } -/** - * tb_find_unused_port() - return the first inactive port on @sw - * @sw: Switch to find the port on - * @type: Port type to look for - */ -static struct tb_port *tb_find_unused_port(struct tb_switch *sw, - enum tb_port_type type) -{ - struct tb_port *port; - - tb_switch_for_each_port(sw, port) { - if (tb_is_upstream_port(port)) - continue; - if (port->config.type != type) - continue; - if (port->cap_adap) - continue; - if (tb_port_is_enabled(port)) - continue; - return port; - } - return NULL; -} - static struct tb_port *tb_find_pcie_down(struct tb_switch *sw, const struct tb_port *port) { @@ -884,6 +985,11 @@ static int tb_start(struct tb *tb) tb_scan_switch(tb->root_switch); /* Find out tunnels created by the boot firmware */ tb_discover_tunnels(tb->root_switch); + /* + * If the boot firmware did not create USB 3.x tunnels create them + * now for the whole topology. + */ + tb_create_usb3_tunnels(tb->root_switch); /* Add DP IN resources for the root switch */ tb_add_dp_resources(tb->root_switch); /* Make the discovered switches available to the userspace */ diff --git a/drivers/thunderbolt/tb.h b/drivers/thunderbolt/tb.h index 63ffb3cbdefe..2eb2bcd3cca3 100644 --- a/drivers/thunderbolt/tb.h +++ b/drivers/thunderbolt/tb.h @@ -432,6 +432,16 @@ static inline bool tb_port_is_dpout(const struct tb_port *port) return port && port->config.type == TB_TYPE_DP_HDMI_OUT; } +static inline bool tb_port_is_usb3_down(const struct tb_port *port) +{ + return port && port->config.type == TB_TYPE_USB3_DOWN; +} + +static inline bool tb_port_is_usb3_up(const struct tb_port *port) +{ + return port && port->config.type == TB_TYPE_USB3_UP; +} + static inline int tb_sw_read(struct tb_switch *sw, void *buffer, enum tb_cfg_space space, u32 offset, u32 length) { @@ -736,6 +746,9 @@ int tb_switch_find_cap(struct tb_switch *sw, enum tb_switch_cap cap); int tb_port_find_cap(struct tb_port *port, enum tb_port_cap cap); bool tb_port_is_enabled(struct tb_port *port); +bool tb_usb3_port_is_enabled(struct tb_port *port); +int tb_usb3_port_enable(struct tb_port *port, bool enable); + bool tb_pci_port_is_enabled(struct tb_port *port); int tb_pci_port_enable(struct tb_port *port, bool enable); @@ -818,6 +831,8 @@ int usb4_switch_alloc_dp_resource(struct tb_switch *sw, struct tb_port *in); int usb4_switch_dealloc_dp_resource(struct tb_switch *sw, struct tb_port *in); struct tb_port *usb4_switch_map_pcie_down(struct tb_switch *sw, const struct tb_port *port); +struct tb_port *usb4_switch_map_usb3_down(struct tb_switch *sw, + const struct tb_port *port); int usb4_port_unlock(struct tb_port *port); #endif diff --git a/drivers/thunderbolt/tb_regs.h b/drivers/thunderbolt/tb_regs.h index ec1a5d1f7c94..c29c5075525a 100644 --- a/drivers/thunderbolt/tb_regs.h +++ b/drivers/thunderbolt/tb_regs.h @@ -180,6 +180,7 @@ struct tb_regs_switch_header { #define ROUTER_CS_5_SLP BIT(0) #define ROUTER_CS_5_C3S BIT(23) #define ROUTER_CS_5_PTO BIT(24) +#define ROUTER_CS_5_UTO BIT(25) #define ROUTER_CS_5_HCO BIT(26) #define ROUTER_CS_5_CV BIT(31) #define ROUTER_CS_6 0x06 @@ -221,7 +222,8 @@ enum tb_port_type { TB_TYPE_DP_HDMI_OUT = 0x0e0102, TB_TYPE_PCIE_DOWN = 0x100101, TB_TYPE_PCIE_UP = 0x100102, - /* TB_TYPE_USB = 0x200000, lower order bits are not known */ + TB_TYPE_USB3_DOWN = 0x200101, + TB_TYPE_USB3_UP = 0x200102, }; /* Present on every port in TB_CF_PORT at address zero. */ @@ -331,6 +333,11 @@ struct tb_regs_port_header { #define ADP_PCIE_CS_0 0x00 #define ADP_PCIE_CS_0_PE BIT(31) +/* USB adapter registers */ +#define ADP_USB3_CS_0 0x00 +#define ADP_USB3_CS_0_V BIT(30) +#define ADP_USB3_CS_0_PE BIT(31) + /* Hop register from TB_CFG_HOPS. 8 byte per entry. */ struct tb_regs_hop { /* DWORD 0 */ diff --git a/drivers/thunderbolt/tunnel.c b/drivers/thunderbolt/tunnel.c index 21d266a76b7d..dbe90bcf4ad4 100644 --- a/drivers/thunderbolt/tunnel.c +++ b/drivers/thunderbolt/tunnel.c @@ -19,6 +19,12 @@ #define TB_PCI_PATH_DOWN 0 #define TB_PCI_PATH_UP 1 +/* USB3 adapters use always HopID of 8 for both directions */ +#define TB_USB3_HOPID 8 + +#define TB_USB3_PATH_DOWN 0 +#define TB_USB3_PATH_UP 1 + /* DP adapters use HopID 8 for AUX and 9 for Video */ #define TB_DP_AUX_TX_HOPID 8 #define TB_DP_AUX_RX_HOPID 8 @@ -31,7 +37,7 @@ #define TB_DMA_PATH_OUT 0 #define TB_DMA_PATH_IN 1 -static const char * const tb_tunnel_names[] = { "PCI", "DP", "DMA" }; +static const char * const tb_tunnel_names[] = { "PCI", "DP", "DMA", "USB3" }; #define __TB_TUNNEL_PRINT(level, tunnel, fmt, arg...) \ do { \ @@ -848,6 +854,156 @@ struct tb_tunnel *tb_tunnel_alloc_dma(struct tb *tb, struct tb_port *nhi, return tunnel; } +static int tb_usb3_activate(struct tb_tunnel *tunnel, bool activate) +{ + int res; + + res = tb_usb3_port_enable(tunnel->src_port, activate); + if (res) + return res; + + if (tb_port_is_usb3_up(tunnel->dst_port)) + return tb_usb3_port_enable(tunnel->dst_port, activate); + + return 0; +} + +static void tb_usb3_init_path(struct tb_path *path) +{ + path->egress_fc_enable = TB_PATH_SOURCE | TB_PATH_INTERNAL; + path->egress_shared_buffer = TB_PATH_NONE; + path->ingress_fc_enable = TB_PATH_ALL; + path->ingress_shared_buffer = TB_PATH_NONE; + path->priority = 3; + path->weight = 3; + path->drop_packages = 0; + path->nfc_credits = 0; + path->hops[0].initial_credits = 7; + path->hops[1].initial_credits = + tb_initial_credits(path->hops[1].in_port->sw); +} + +/** + * tb_tunnel_discover_usb3() - Discover existing USB3 tunnels + * @tb: Pointer to the domain structure + * @down: USB3 downstream adapter + * + * If @down adapter is active, follows the tunnel to the USB3 upstream + * adapter and back. Returns the discovered tunnel or %NULL if there was + * no tunnel. + */ +struct tb_tunnel *tb_tunnel_discover_usb3(struct tb *tb, struct tb_port *down) +{ + struct tb_tunnel *tunnel; + struct tb_path *path; + + if (!tb_usb3_port_is_enabled(down)) + return NULL; + + tunnel = tb_tunnel_alloc(tb, 2, TB_TUNNEL_USB3); + if (!tunnel) + return NULL; + + tunnel->activate = tb_usb3_activate; + tunnel->src_port = down; + + /* + * Discover both paths even if they are not complete. We will + * clean them up by calling tb_tunnel_deactivate() below in that + * case. + */ + path = tb_path_discover(down, TB_USB3_HOPID, NULL, -1, + &tunnel->dst_port, "USB3 Up"); + if (!path) { + /* Just disable the downstream port */ + tb_usb3_port_enable(down, false); + goto err_free; + } + tunnel->paths[TB_USB3_PATH_UP] = path; + tb_usb3_init_path(tunnel->paths[TB_USB3_PATH_UP]); + + path = tb_path_discover(tunnel->dst_port, -1, down, TB_USB3_HOPID, NULL, + "USB3 Down"); + if (!path) + goto err_deactivate; + tunnel->paths[TB_USB3_PATH_DOWN] = path; + tb_usb3_init_path(tunnel->paths[TB_USB3_PATH_DOWN]); + + /* Validate that the tunnel is complete */ + if (!tb_port_is_usb3_up(tunnel->dst_port)) { + tb_port_warn(tunnel->dst_port, + "path does not end on an USB3 adapter, cleaning up\n"); + goto err_deactivate; + } + + if (down != tunnel->src_port) { + tb_tunnel_warn(tunnel, "path is not complete, cleaning up\n"); + goto err_deactivate; + } + + if (!tb_usb3_port_is_enabled(tunnel->dst_port)) { + tb_tunnel_warn(tunnel, + "tunnel is not fully activated, cleaning up\n"); + goto err_deactivate; + } + + tb_tunnel_dbg(tunnel, "discovered\n"); + return tunnel; + +err_deactivate: + tb_tunnel_deactivate(tunnel); +err_free: + tb_tunnel_free(tunnel); + + return NULL; +} + +/** + * tb_tunnel_alloc_usb3() - allocate a USB3 tunnel + * @tb: Pointer to the domain structure + * @up: USB3 upstream adapter port + * @down: USB3 downstream adapter port + * + * Allocate an USB3 tunnel. The ports must be of type @TB_TYPE_USB3_UP and + * @TB_TYPE_USB3_DOWN. + * + * Return: Returns a tb_tunnel on success or %NULL on failure. + */ +struct tb_tunnel *tb_tunnel_alloc_usb3(struct tb *tb, struct tb_port *up, + struct tb_port *down) +{ + struct tb_tunnel *tunnel; + struct tb_path *path; + + tunnel = tb_tunnel_alloc(tb, 2, TB_TUNNEL_USB3); + if (!tunnel) + return NULL; + + tunnel->activate = tb_usb3_activate; + tunnel->src_port = down; + tunnel->dst_port = up; + + path = tb_path_alloc(tb, down, TB_USB3_HOPID, up, TB_USB3_HOPID, 0, + "USB3 Down"); + if (!path) { + tb_tunnel_free(tunnel); + return NULL; + } + tb_usb3_init_path(path); + tunnel->paths[TB_USB3_PATH_DOWN] = path; + + path = tb_path_alloc(tb, up, TB_USB3_HOPID, down, TB_USB3_HOPID, 0, + "USB3 Up"); + if (!path) { + tb_tunnel_free(tunnel); + return NULL; + } + tb_usb3_init_path(path); + tunnel->paths[TB_USB3_PATH_UP] = path; + + return tunnel; +} + /** * tb_tunnel_free() - free a tunnel * @tunnel: Tunnel to be freed diff --git a/drivers/thunderbolt/tunnel.h b/drivers/thunderbolt/tunnel.h index ba888da005f5..3f5ba93225e7 100644 --- a/drivers/thunderbolt/tunnel.h +++ b/drivers/thunderbolt/tunnel.h @@ -15,6 +15,7 @@ enum tb_tunnel_type { TB_TUNNEL_PCI, TB_TUNNEL_DP, TB_TUNNEL_DMA, + TB_TUNNEL_USB3, }; /** @@ -57,6 +58,9 @@ struct tb_tunnel *tb_tunnel_alloc_dma(struct tb *tb, struct tb_port *nhi, struct tb_port *dst, int transmit_ring, int transmit_path, int receive_ring, int receive_path); +struct tb_tunnel *tb_tunnel_discover_usb3(struct tb *tb, struct tb_port *down); +struct tb_tunnel *tb_tunnel_alloc_usb3(struct tb *tb, struct tb_port *up, + struct tb_port *down); void tb_tunnel_free(struct tb_tunnel *tunnel); int tb_tunnel_activate(struct tb_tunnel *tunnel); @@ -82,5 +86,10 @@ static inline bool tb_tunnel_is_dma(const struct tb_tunnel *tunnel) return tunnel->type == TB_TUNNEL_DMA; } +static inline bool tb_tunnel_is_usb3(const struct tb_tunnel *tunnel) +{ + return tunnel->type == TB_TUNNEL_USB3; +} + #endif diff --git a/drivers/thunderbolt/usb4.c b/drivers/thunderbolt/usb4.c index b84c74346d2b..dbe7ecce4505 100644 --- a/drivers/thunderbolt/usb4.c +++ b/drivers/thunderbolt/usb4.c @@ -226,10 +226,19 @@ int usb4_switch_setup(struct tb_switch *sw) parent = tb_switch_parent(sw); + if (tb_switch_find_port(parent, TB_TYPE_USB3_DOWN)) { + val |= ROUTER_CS_5_UTO; + xhci = false; + } + /* Only enable PCIe tunneling if the parent router supports it */ if (tb_switch_find_port(parent, TB_TYPE_PCIE_DOWN)) { val |= ROUTER_CS_5_PTO; - /* xHCI can be enabled if PCIe tunneling is supported */ + /* + * xHCI can be enabled if PCIe tunneling is supported + * and the parent does not have any USB3 dowstream + * adapters (so we cannot do USB 3.x tunneling). + */ if (xhci & ROUTER_CS_6_HCI) val |= ROUTER_CS_5_HCO; } @@ -704,6 +713,37 @@ struct tb_port *usb4_switch_map_pcie_down(struct tb_switch *sw, } /** + * usb4_switch_map_usb3_down() - Map USB4 port to a USB3 downstream adapter + * @sw: USB4 router + * @port: USB4 port + * + * USB4 routers have direct mapping between USB4 ports and USB 3.x + * downstream adapters where the USB 3.x topology is extended. This + * function returns the corresponding downstream USB 3.x adapter or + * %NULL if no such mapping was possible. + */ +struct tb_port *usb4_switch_map_usb3_down(struct tb_switch *sw, + const struct tb_port *port) +{ + int usb4_idx = usb4_port_idx(sw, port); + struct tb_port *p; + int usb_idx = 0; + + /* Find USB3 down port matching usb4_port */ + tb_switch_for_each_port(sw, p) { + if (!tb_port_is_usb3_down(p)) + continue; + + if (usb_idx == usb4_idx && !tb_usb3_port_is_enabled(p)) + return p; + + usb_idx++; + } + + return NULL; +} + +/** * usb4_port_unlock() - Unlock USB4 downstream port * @port: USB4 port to unlock * |