diff options
Diffstat (limited to 'drivers/thunderbolt/usb4.c')
| -rw-r--r-- | drivers/thunderbolt/usb4.c | 148 |
1 files changed, 145 insertions, 3 deletions
diff --git a/drivers/thunderbolt/usb4.c b/drivers/thunderbolt/usb4.c index 3a2e7126db9d..f986854aa207 100644 --- a/drivers/thunderbolt/usb4.c +++ b/drivers/thunderbolt/usb4.c @@ -1046,6 +1046,26 @@ int usb4_port_unlock(struct tb_port *port) return tb_port_write(port, &val, TB_CFG_PORT, ADP_CS_4, 1); } +/** + * usb4_port_hotplug_enable() - Enables hotplug for a port + * @port: USB4 port to operate on + * + * Enables hot plug events on a given port. This is only intended + * to be used on lane, DP-IN, and DP-OUT adapters. + */ +int usb4_port_hotplug_enable(struct tb_port *port) +{ + int ret; + u32 val; + + ret = tb_port_read(port, &val, TB_CFG_PORT, ADP_CS_5, 1); + if (ret) + return ret; + + val &= ~ADP_CS_5_DHP; + return tb_port_write(port, &val, TB_CFG_PORT, ADP_CS_5, 1); +} + static int usb4_port_set_configured(struct tb_port *port, bool configured) { int ret; @@ -1115,12 +1135,14 @@ static int usb4_set_xdomain_configured(struct tb_port *port, bool configured) /** * usb4_port_configure_xdomain() - Configure port for XDomain * @port: USB4 port connected to another host + * @xd: XDomain that is connected to the port * - * Marks the USB4 port as being connected to another host. Returns %0 in - * success and negative errno in failure. + * Marks the USB4 port as being connected to another host and updates + * the link type. Returns %0 in success and negative errno in failure. */ -int usb4_port_configure_xdomain(struct tb_port *port) +int usb4_port_configure_xdomain(struct tb_port *port, struct tb_xdomain *xd) { + xd->link_usb4 = link_is_usb4(port); return usb4_set_xdomain_configured(port, true); } @@ -1384,6 +1406,126 @@ bool usb4_port_clx_supported(struct tb_port *port) return !!(val & PORT_CS_18_CPS); } +/** + * usb4_port_margining_caps() - Read USB4 port marginig capabilities + * @port: USB4 port + * @caps: Array with at least two elements to hold the results + * + * Reads the USB4 port lane margining capabilities into @caps. + */ +int usb4_port_margining_caps(struct tb_port *port, u32 *caps) +{ + int ret; + + ret = usb4_port_sb_op(port, USB4_SB_TARGET_ROUTER, 0, + USB4_SB_OPCODE_READ_LANE_MARGINING_CAP, 500); + if (ret) + return ret; + + return usb4_port_sb_read(port, USB4_SB_TARGET_ROUTER, 0, + USB4_SB_DATA, caps, sizeof(*caps) * 2); +} + +/** + * usb4_port_hw_margin() - Run hardware lane margining on port + * @port: USB4 port + * @lanes: Which lanes to run (must match the port capabilities). Can be + * %0, %1 or %7. + * @ber_level: BER level contour value + * @timing: Perform timing margining instead of voltage + * @right_high: Use Right/high margin instead of left/low + * @results: Array with at least two elements to hold the results + * + * Runs hardware lane margining on USB4 port and returns the result in + * @results. + */ +int usb4_port_hw_margin(struct tb_port *port, unsigned int lanes, + unsigned int ber_level, bool timing, bool right_high, + u32 *results) +{ + u32 val; + int ret; + + val = lanes; + if (timing) + val |= USB4_MARGIN_HW_TIME; + if (right_high) + val |= USB4_MARGIN_HW_RH; + if (ber_level) + val |= (ber_level << USB4_MARGIN_HW_BER_SHIFT) & + USB4_MARGIN_HW_BER_MASK; + + ret = usb4_port_sb_write(port, USB4_SB_TARGET_ROUTER, 0, + USB4_SB_METADATA, &val, sizeof(val)); + if (ret) + return ret; + + ret = usb4_port_sb_op(port, USB4_SB_TARGET_ROUTER, 0, + USB4_SB_OPCODE_RUN_HW_LANE_MARGINING, 2500); + if (ret) + return ret; + + return usb4_port_sb_read(port, USB4_SB_TARGET_ROUTER, 0, + USB4_SB_DATA, results, sizeof(*results) * 2); +} + +/** + * usb4_port_sw_margin() - Run software lane margining on port + * @port: USB4 port + * @lanes: Which lanes to run (must match the port capabilities). Can be + * %0, %1 or %7. + * @timing: Perform timing margining instead of voltage + * @right_high: Use Right/high margin instead of left/low + * @counter: What to do with the error counter + * + * Runs software lane margining on USB4 port. Read back the error + * counters by calling usb4_port_sw_margin_errors(). Returns %0 in + * success and negative errno otherwise. + */ +int usb4_port_sw_margin(struct tb_port *port, unsigned int lanes, bool timing, + bool right_high, u32 counter) +{ + u32 val; + int ret; + + val = lanes; + if (timing) + val |= USB4_MARGIN_SW_TIME; + if (right_high) + val |= USB4_MARGIN_SW_RH; + val |= (counter << USB4_MARGIN_SW_COUNTER_SHIFT) & + USB4_MARGIN_SW_COUNTER_MASK; + + ret = usb4_port_sb_write(port, USB4_SB_TARGET_ROUTER, 0, + USB4_SB_METADATA, &val, sizeof(val)); + if (ret) + return ret; + + return usb4_port_sb_op(port, USB4_SB_TARGET_ROUTER, 0, + USB4_SB_OPCODE_RUN_SW_LANE_MARGINING, 2500); +} + +/** + * usb4_port_sw_margin_errors() - Read the software margining error counters + * @port: USB4 port + * @errors: Error metadata is copied here. + * + * This reads back the software margining error counters from the port. + * Returns %0 in success and negative errno otherwise. + */ +int usb4_port_sw_margin_errors(struct tb_port *port, u32 *errors) +{ + int ret; + + ret = usb4_port_sb_op(port, USB4_SB_TARGET_ROUTER, 0, + USB4_SB_OPCODE_READ_SW_MARGIN_ERR, 150); + if (ret) + return ret; + + return usb4_port_sb_read(port, USB4_SB_TARGET_ROUTER, 0, + USB4_SB_METADATA, errors, sizeof(*errors)); +} + static inline int usb4_port_retimer_op(struct tb_port *port, u8 index, enum usb4_sb_opcode opcode, int timeout_msec) |