diff options
Diffstat (limited to 'drivers/thermal')
| -rw-r--r-- | drivers/thermal/armada_thermal.c | 28 | ||||
| -rw-r--r-- | drivers/thermal/broadcom/bcm2835_thermal.c | 11 | ||||
| -rw-r--r-- | drivers/thermal/broadcom/brcmstb_thermal.c | 2 | ||||
| -rw-r--r-- | drivers/thermal/hisi_thermal.c | 4 | ||||
| -rw-r--r-- | drivers/thermal/st/stm_thermal.c | 12 |
5 files changed, 23 insertions, 34 deletions
diff --git a/drivers/thermal/armada_thermal.c b/drivers/thermal/armada_thermal.c index 92f67d40f2e9..d7105d01859a 100644 --- a/drivers/thermal/armada_thermal.c +++ b/drivers/thermal/armada_thermal.c @@ -357,7 +357,7 @@ static int armada_get_temp_legacy(struct thermal_zone_device *thermal, int ret; /* Valid check */ - if (armada_is_valid(priv)) { + if (!armada_is_valid(priv)) { dev_err(priv->dev, "Temperature sensor reading not valid\n"); return -EIO; @@ -395,7 +395,7 @@ unlock_mutex: return ret; } -static struct thermal_zone_of_device_ops of_ops = { +static const struct thermal_zone_of_device_ops of_ops = { .get_temp = armada_get_temp, }; @@ -526,23 +526,21 @@ static int armada_thermal_probe_legacy(struct platform_device *pdev, /* First memory region points towards the status register */ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) - return -EIO; - - /* - * Edit the resource start address and length to map over all the - * registers, instead of pointing at them one by one. - */ - res->start -= data->syscon_status_off; - res->end = res->start + max(data->syscon_status_off, - max(data->syscon_control0_off, - data->syscon_control1_off)) + - sizeof(unsigned int) - 1; - base = devm_ioremap_resource(&pdev->dev, res); if (IS_ERR(base)) return PTR_ERR(base); + /* + * Fix up from the old individual DT register specification to + * cover all the registers. We do this by adjusting the ioremap() + * result, which should be fine as ioremap() deals with pages. + * However, validate that we do not cross a page boundary while + * making this adjustment. + */ + if (((unsigned long)base & ~PAGE_MASK) < data->syscon_status_off) + return -EINVAL; + base -= data->syscon_status_off; + priv->syscon = devm_regmap_init_mmio(&pdev->dev, base, &armada_thermal_regmap_config); if (IS_ERR(priv->syscon)) diff --git a/drivers/thermal/broadcom/bcm2835_thermal.c b/drivers/thermal/broadcom/bcm2835_thermal.c index 23ad4f9f2143..b9d90f0ed504 100644 --- a/drivers/thermal/broadcom/bcm2835_thermal.c +++ b/drivers/thermal/broadcom/bcm2835_thermal.c @@ -1,17 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0+ /* * Driver for Broadcom BCM2835 SoC temperature sensor * * Copyright (C) 2016 Martin Sperl - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. */ #include <linux/clk.h> diff --git a/drivers/thermal/broadcom/brcmstb_thermal.c b/drivers/thermal/broadcom/brcmstb_thermal.c index 1919f91fa756..e8b1570cc388 100644 --- a/drivers/thermal/broadcom/brcmstb_thermal.c +++ b/drivers/thermal/broadcom/brcmstb_thermal.c @@ -299,7 +299,7 @@ static int brcmstb_set_trips(void *data, int low, int high) return 0; } -static struct thermal_zone_of_device_ops of_ops = { +static const struct thermal_zone_of_device_ops of_ops = { .get_temp = brcmstb_get_temp, .set_trips = brcmstb_set_trips, }; diff --git a/drivers/thermal/hisi_thermal.c b/drivers/thermal/hisi_thermal.c index c4111a98f1a7..2d26ae80e202 100644 --- a/drivers/thermal/hisi_thermal.c +++ b/drivers/thermal/hisi_thermal.c @@ -424,7 +424,7 @@ static int hi3660_thermal_probe(struct hisi_thermal_data *data) struct platform_device *pdev = data->pdev; struct device *dev = &pdev->dev; - data->nr_sensors = 2; + data->nr_sensors = 1; data->sensor = devm_kzalloc(dev, sizeof(*data->sensor) * data->nr_sensors, GFP_KERNEL); @@ -589,7 +589,7 @@ static int hisi_thermal_probe(struct platform_device *pdev) return ret; } - ret = platform_get_irq_byname(pdev, sensor->irq_name); + ret = platform_get_irq(pdev, 0); if (ret < 0) return ret; diff --git a/drivers/thermal/st/stm_thermal.c b/drivers/thermal/st/stm_thermal.c index 47623da0f91b..bbd73c5a4a4e 100644 --- a/drivers/thermal/st/stm_thermal.c +++ b/drivers/thermal/st/stm_thermal.c @@ -241,8 +241,8 @@ static int stm_thermal_read_factory_settings(struct stm_thermal_sensor *sensor) sensor->t0 = TS1_T0_VAL1; /* Retrieve fmt0 and put it on Hz */ - sensor->fmt0 = ADJUST * readl_relaxed(sensor->base + DTS_T0VALR1_OFFSET) - & TS1_FMT0_MASK; + sensor->fmt0 = ADJUST * (readl_relaxed(sensor->base + + DTS_T0VALR1_OFFSET) & TS1_FMT0_MASK); /* Retrieve ramp coefficient */ sensor->ramp_coeff = readl_relaxed(sensor->base + DTS_RAMPVALR_OFFSET) & @@ -532,6 +532,10 @@ static int stm_thermal_prepare(struct stm_thermal_sensor *sensor) if (ret) return ret; + ret = stm_thermal_read_factory_settings(sensor); + if (ret) + goto thermal_unprepare; + ret = stm_thermal_calibration(sensor); if (ret) goto thermal_unprepare; @@ -636,10 +640,6 @@ static int stm_thermal_probe(struct platform_device *pdev) /* Populate sensor */ sensor->base = base; - ret = stm_thermal_read_factory_settings(sensor); - if (ret) - return ret; - sensor->clk = devm_clk_get(&pdev->dev, "pclk"); if (IS_ERR(sensor->clk)) { dev_err(&pdev->dev, "%s: failed to fetch PCLK clock\n", |