summaryrefslogtreecommitdiff
path: root/drivers/spi
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/spi')
-rw-r--r--drivers/spi/spi-atmel.c4
-rw-r--r--drivers/spi/spi-bcm-qspi.c77
-rw-r--r--drivers/spi/spi-mt65xx.c64
-rw-r--r--drivers/spi/spi-mux.c7
-rw-r--r--drivers/spi/spi-nxp-fspi.c26
-rw-r--r--drivers/spi/spi-tegra20-slink.c4
-rw-r--r--drivers/spi/spi.c27
-rw-r--r--drivers/spi/spidev.c14
8 files changed, 123 insertions, 100 deletions
diff --git a/drivers/spi/spi-atmel.c b/drivers/spi/spi-atmel.c
index 788dcdf25f00..f872cf196c2f 100644
--- a/drivers/spi/spi-atmel.c
+++ b/drivers/spi/spi-atmel.c
@@ -1301,7 +1301,7 @@ static int atmel_spi_one_transfer(struct spi_master *master,
* DMA map early, for performance (empties dcache ASAP) and
* better fault reporting.
*/
- if ((!master->cur_msg_mapped)
+ if ((!master->cur_msg->is_dma_mapped)
&& as->use_pdc) {
if (atmel_spi_dma_map_xfer(as, xfer) < 0)
return -ENOMEM;
@@ -1381,7 +1381,7 @@ static int atmel_spi_one_transfer(struct spi_master *master,
}
}
- if (!master->cur_msg_mapped
+ if (!master->cur_msg->is_dma_mapped
&& as->use_pdc)
atmel_spi_dma_unmap_xfer(master, xfer);
diff --git a/drivers/spi/spi-bcm-qspi.c b/drivers/spi/spi-bcm-qspi.c
index a78e56f566dd..3043677ba222 100644
--- a/drivers/spi/spi-bcm-qspi.c
+++ b/drivers/spi/spi-bcm-qspi.c
@@ -1250,10 +1250,14 @@ static void bcm_qspi_hw_init(struct bcm_qspi *qspi)
static void bcm_qspi_hw_uninit(struct bcm_qspi *qspi)
{
+ u32 status = bcm_qspi_read(qspi, MSPI, MSPI_MSPI_STATUS);
+
bcm_qspi_write(qspi, MSPI, MSPI_SPCR2, 0);
if (has_bspi(qspi))
bcm_qspi_write(qspi, MSPI, MSPI_WRITE_LOCK, 0);
+ /* clear interrupt */
+ bcm_qspi_write(qspi, MSPI, MSPI_MSPI_STATUS, status & ~1);
}
static const struct spi_controller_mem_ops bcm_qspi_mem_ops = {
@@ -1397,6 +1401,47 @@ int bcm_qspi_probe(struct platform_device *pdev,
if (!qspi->dev_ids)
return -ENOMEM;
+ /*
+ * Some SoCs integrate spi controller (e.g., its interrupt bits)
+ * in specific ways
+ */
+ if (soc_intc) {
+ qspi->soc_intc = soc_intc;
+ soc_intc->bcm_qspi_int_set(soc_intc, MSPI_DONE, true);
+ } else {
+ qspi->soc_intc = NULL;
+ }
+
+ if (qspi->clk) {
+ ret = clk_prepare_enable(qspi->clk);
+ if (ret) {
+ dev_err(dev, "failed to prepare clock\n");
+ goto qspi_probe_err;
+ }
+ qspi->base_clk = clk_get_rate(qspi->clk);
+ } else {
+ qspi->base_clk = MSPI_BASE_FREQ;
+ }
+
+ if (data->has_mspi_rev) {
+ rev = bcm_qspi_read(qspi, MSPI, MSPI_REV);
+ /* some older revs do not have a MSPI_REV register */
+ if ((rev & 0xff) == 0xff)
+ rev = 0;
+ }
+
+ qspi->mspi_maj_rev = (rev >> 4) & 0xf;
+ qspi->mspi_min_rev = rev & 0xf;
+ qspi->mspi_spcr3_sysclk = data->has_spcr3_sysclk;
+
+ qspi->max_speed_hz = qspi->base_clk / (bcm_qspi_spbr_min(qspi) * 2);
+
+ /*
+ * On SW resets it is possible to have the mask still enabled
+ * Need to disable the mask and clear the status while we init
+ */
+ bcm_qspi_hw_uninit(qspi);
+
for (val = 0; val < num_irqs; val++) {
irq = -1;
name = qspi_irq_tab[val].irq_name;
@@ -1433,38 +1478,6 @@ int bcm_qspi_probe(struct platform_device *pdev,
goto qspi_probe_err;
}
- /*
- * Some SoCs integrate spi controller (e.g., its interrupt bits)
- * in specific ways
- */
- if (soc_intc) {
- qspi->soc_intc = soc_intc;
- soc_intc->bcm_qspi_int_set(soc_intc, MSPI_DONE, true);
- } else {
- qspi->soc_intc = NULL;
- }
-
- ret = clk_prepare_enable(qspi->clk);
- if (ret) {
- dev_err(dev, "failed to prepare clock\n");
- goto qspi_probe_err;
- }
-
- qspi->base_clk = clk_get_rate(qspi->clk);
-
- if (data->has_mspi_rev) {
- rev = bcm_qspi_read(qspi, MSPI, MSPI_REV);
- /* some older revs do not have a MSPI_REV register */
- if ((rev & 0xff) == 0xff)
- rev = 0;
- }
-
- qspi->mspi_maj_rev = (rev >> 4) & 0xf;
- qspi->mspi_min_rev = rev & 0xf;
- qspi->mspi_spcr3_sysclk = data->has_spcr3_sysclk;
-
- qspi->max_speed_hz = qspi->base_clk / (bcm_qspi_spbr_min(qspi) * 2);
-
bcm_qspi_hw_init(qspi);
init_completion(&qspi->mspi_done);
init_completion(&qspi->bspi_done);
diff --git a/drivers/spi/spi-mt65xx.c b/drivers/spi/spi-mt65xx.c
index 386e8c84be0a..a15de10ee286 100644
--- a/drivers/spi/spi-mt65xx.c
+++ b/drivers/spi/spi-mt65xx.c
@@ -233,36 +233,44 @@ static int mtk_spi_set_hw_cs_timing(struct spi_device *spi)
return delay;
inactive = (delay * DIV_ROUND_UP(mdata->spi_clk_hz, 1000000)) / 1000;
- setup = setup ? setup : 1;
- hold = hold ? hold : 1;
- inactive = inactive ? inactive : 1;
-
- reg_val = readl(mdata->base + SPI_CFG0_REG);
- if (mdata->dev_comp->enhance_timing) {
- hold = min_t(u32, hold, 0x10000);
- setup = min_t(u32, setup, 0x10000);
- reg_val &= ~(0xffff << SPI_ADJUST_CFG0_CS_HOLD_OFFSET);
- reg_val |= (((hold - 1) & 0xffff)
- << SPI_ADJUST_CFG0_CS_HOLD_OFFSET);
- reg_val &= ~(0xffff << SPI_ADJUST_CFG0_CS_SETUP_OFFSET);
- reg_val |= (((setup - 1) & 0xffff)
- << SPI_ADJUST_CFG0_CS_SETUP_OFFSET);
- } else {
- hold = min_t(u32, hold, 0x100);
- setup = min_t(u32, setup, 0x100);
- reg_val &= ~(0xff << SPI_CFG0_CS_HOLD_OFFSET);
- reg_val |= (((hold - 1) & 0xff) << SPI_CFG0_CS_HOLD_OFFSET);
- reg_val &= ~(0xff << SPI_CFG0_CS_SETUP_OFFSET);
- reg_val |= (((setup - 1) & 0xff)
- << SPI_CFG0_CS_SETUP_OFFSET);
+ if (hold || setup) {
+ reg_val = readl(mdata->base + SPI_CFG0_REG);
+ if (mdata->dev_comp->enhance_timing) {
+ if (hold) {
+ hold = min_t(u32, hold, 0x10000);
+ reg_val &= ~(0xffff << SPI_ADJUST_CFG0_CS_HOLD_OFFSET);
+ reg_val |= (((hold - 1) & 0xffff)
+ << SPI_ADJUST_CFG0_CS_HOLD_OFFSET);
+ }
+ if (setup) {
+ setup = min_t(u32, setup, 0x10000);
+ reg_val &= ~(0xffff << SPI_ADJUST_CFG0_CS_SETUP_OFFSET);
+ reg_val |= (((setup - 1) & 0xffff)
+ << SPI_ADJUST_CFG0_CS_SETUP_OFFSET);
+ }
+ } else {
+ if (hold) {
+ hold = min_t(u32, hold, 0x100);
+ reg_val &= ~(0xff << SPI_CFG0_CS_HOLD_OFFSET);
+ reg_val |= (((hold - 1) & 0xff) << SPI_CFG0_CS_HOLD_OFFSET);
+ }
+ if (setup) {
+ setup = min_t(u32, setup, 0x100);
+ reg_val &= ~(0xff << SPI_CFG0_CS_SETUP_OFFSET);
+ reg_val |= (((setup - 1) & 0xff)
+ << SPI_CFG0_CS_SETUP_OFFSET);
+ }
+ }
+ writel(reg_val, mdata->base + SPI_CFG0_REG);
}
- writel(reg_val, mdata->base + SPI_CFG0_REG);
- inactive = min_t(u32, inactive, 0x100);
- reg_val = readl(mdata->base + SPI_CFG1_REG);
- reg_val &= ~SPI_CFG1_CS_IDLE_MASK;
- reg_val |= (((inactive - 1) & 0xff) << SPI_CFG1_CS_IDLE_OFFSET);
- writel(reg_val, mdata->base + SPI_CFG1_REG);
+ if (inactive) {
+ inactive = min_t(u32, inactive, 0x100);
+ reg_val = readl(mdata->base + SPI_CFG1_REG);
+ reg_val &= ~SPI_CFG1_CS_IDLE_MASK;
+ reg_val |= (((inactive - 1) & 0xff) << SPI_CFG1_CS_IDLE_OFFSET);
+ writel(reg_val, mdata->base + SPI_CFG1_REG);
+ }
return 0;
}
diff --git a/drivers/spi/spi-mux.c b/drivers/spi/spi-mux.c
index 9708b7827ff7..f5d32ec4634e 100644
--- a/drivers/spi/spi-mux.c
+++ b/drivers/spi/spi-mux.c
@@ -137,6 +137,13 @@ static int spi_mux_probe(struct spi_device *spi)
priv = spi_controller_get_devdata(ctlr);
priv->spi = spi;
+ /*
+ * Increase lockdep class as these lock are taken while the parent bus
+ * already holds their instance's lock.
+ */
+ lockdep_set_subclass(&ctlr->io_mutex, 1);
+ lockdep_set_subclass(&ctlr->add_lock, 1);
+
priv->mux = devm_mux_control_get(&spi->dev, NULL);
if (IS_ERR(priv->mux)) {
ret = dev_err_probe(&spi->dev, PTR_ERR(priv->mux),
diff --git a/drivers/spi/spi-nxp-fspi.c b/drivers/spi/spi-nxp-fspi.c
index a66fa97046ee..2b0301fc971c 100644
--- a/drivers/spi/spi-nxp-fspi.c
+++ b/drivers/spi/spi-nxp-fspi.c
@@ -33,6 +33,7 @@
#include <linux/acpi.h>
#include <linux/bitops.h>
+#include <linux/bitfield.h>
#include <linux/clk.h>
#include <linux/completion.h>
#include <linux/delay.h>
@@ -315,6 +316,7 @@
#define NXP_FSPI_MIN_IOMAP SZ_4M
#define DCFG_RCWSR1 0x100
+#define SYS_PLL_RAT GENMASK(6, 2)
/* Access flash memory using IP bus only */
#define FSPI_QUIRK_USE_IP_ONLY BIT(0)
@@ -926,9 +928,8 @@ static void erratum_err050568(struct nxp_fspi *f)
{ .family = "QorIQ LS1028A" },
{ /* sentinel */ }
};
- struct device_node *np;
struct regmap *map;
- u32 val = 0, sysclk = 0;
+ u32 val, sys_pll_ratio;
int ret;
/* Check for LS1028A family */
@@ -937,7 +938,6 @@ static void erratum_err050568(struct nxp_fspi *f)
return;
}
- /* Compute system clock frequency multiplier ratio */
map = syscon_regmap_lookup_by_compatible("fsl,ls1028a-dcfg");
if (IS_ERR(map)) {
dev_err(f->dev, "No syscon regmap\n");
@@ -948,23 +948,11 @@ static void erratum_err050568(struct nxp_fspi *f)
if (ret < 0)
goto err;
- /* Strap bits 6:2 define SYS_PLL_RAT i.e frequency multiplier ratio */
- val = (val >> 2) & 0x1F;
- WARN(val == 0, "Strapping is zero: Cannot determine ratio");
+ sys_pll_ratio = FIELD_GET(SYS_PLL_RAT, val);
+ dev_dbg(f->dev, "val: 0x%08x, sys_pll_ratio: %d\n", val, sys_pll_ratio);
- /* Compute system clock frequency */
- np = of_find_node_by_name(NULL, "clock-sysclk");
- if (!np)
- goto err;
-
- if (of_property_read_u32(np, "clock-frequency", &sysclk))
- goto err;
-
- sysclk = (sysclk * val) / 1000000; /* Convert sysclk to Mhz */
- dev_dbg(f->dev, "val: 0x%08x, sysclk: %dMhz\n", val, sysclk);
-
- /* Use IP bus only if PLL is 300MHz */
- if (sysclk == 300)
+ /* Use IP bus only if platform clock is 300MHz */
+ if (sys_pll_ratio == 3)
f->devtype_data->quirks |= FSPI_QUIRK_USE_IP_ONLY;
return;
diff --git a/drivers/spi/spi-tegra20-slink.c b/drivers/spi/spi-tegra20-slink.c
index 8ce840c7ecc8..713292b0c71e 100644
--- a/drivers/spi/spi-tegra20-slink.c
+++ b/drivers/spi/spi-tegra20-slink.c
@@ -1182,8 +1182,7 @@ static int tegra_slink_resume(struct device *dev)
}
#endif
-#ifdef CONFIG_PM
-static int tegra_slink_runtime_suspend(struct device *dev)
+static int __maybe_unused tegra_slink_runtime_suspend(struct device *dev)
{
struct spi_master *master = dev_get_drvdata(dev);
struct tegra_slink_data *tspi = spi_master_get_devdata(master);
@@ -1208,7 +1207,6 @@ static int tegra_slink_runtime_resume(struct device *dev)
}
return 0;
}
-#endif /* CONFIG_PM */
static const struct dev_pm_ops slink_pm_ops = {
SET_RUNTIME_PM_OPS(tegra_slink_runtime_suspend,
diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c
index aea037c65985..926b68aa45d3 100644
--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
@@ -478,12 +478,6 @@ static LIST_HEAD(spi_controller_list);
*/
static DEFINE_MUTEX(board_lock);
-/*
- * Prevents addition of devices with same chip select and
- * addition of devices below an unregistering controller.
- */
-static DEFINE_MUTEX(spi_add_lock);
-
/**
* spi_alloc_device - Allocate a new SPI device
* @ctlr: Controller to which device is connected
@@ -636,9 +630,9 @@ int spi_add_device(struct spi_device *spi)
* chipselect **BEFORE** we call setup(), else we'll trash
* its configuration. Lock against concurrent add() calls.
*/
- mutex_lock(&spi_add_lock);
+ mutex_lock(&ctlr->add_lock);
status = __spi_add_device(spi);
- mutex_unlock(&spi_add_lock);
+ mutex_unlock(&ctlr->add_lock);
return status;
}
EXPORT_SYMBOL_GPL(spi_add_device);
@@ -658,7 +652,7 @@ static int spi_add_device_locked(struct spi_device *spi)
/* Set the bus ID string */
spi_dev_set_name(spi);
- WARN_ON(!mutex_is_locked(&spi_add_lock));
+ WARN_ON(!mutex_is_locked(&ctlr->add_lock));
return __spi_add_device(spi);
}
@@ -2553,6 +2547,12 @@ struct spi_controller *__spi_alloc_controller(struct device *dev,
return NULL;
device_initialize(&ctlr->dev);
+ INIT_LIST_HEAD(&ctlr->queue);
+ spin_lock_init(&ctlr->queue_lock);
+ spin_lock_init(&ctlr->bus_lock_spinlock);
+ mutex_init(&ctlr->bus_lock_mutex);
+ mutex_init(&ctlr->io_mutex);
+ mutex_init(&ctlr->add_lock);
ctlr->bus_num = -1;
ctlr->num_chipselect = 1;
ctlr->slave = slave;
@@ -2825,11 +2825,6 @@ int spi_register_controller(struct spi_controller *ctlr)
return id;
ctlr->bus_num = id;
}
- INIT_LIST_HEAD(&ctlr->queue);
- spin_lock_init(&ctlr->queue_lock);
- spin_lock_init(&ctlr->bus_lock_spinlock);
- mutex_init(&ctlr->bus_lock_mutex);
- mutex_init(&ctlr->io_mutex);
ctlr->bus_lock_flag = 0;
init_completion(&ctlr->xfer_completion);
if (!ctlr->max_dma_len)
@@ -2966,7 +2961,7 @@ void spi_unregister_controller(struct spi_controller *ctlr)
/* Prevent addition of new devices, unregister existing ones */
if (IS_ENABLED(CONFIG_SPI_DYNAMIC))
- mutex_lock(&spi_add_lock);
+ mutex_lock(&ctlr->add_lock);
device_for_each_child(&ctlr->dev, NULL, __unregister);
@@ -2997,7 +2992,7 @@ void spi_unregister_controller(struct spi_controller *ctlr)
mutex_unlock(&board_lock);
if (IS_ENABLED(CONFIG_SPI_DYNAMIC))
- mutex_unlock(&spi_add_lock);
+ mutex_unlock(&ctlr->add_lock);
}
EXPORT_SYMBOL_GPL(spi_unregister_controller);
diff --git a/drivers/spi/spidev.c b/drivers/spi/spidev.c
index 6dc29ce3b4bf..1bd73e322b7b 100644
--- a/drivers/spi/spidev.c
+++ b/drivers/spi/spidev.c
@@ -673,6 +673,19 @@ static const struct file_operations spidev_fops = {
static struct class *spidev_class;
+static const struct spi_device_id spidev_spi_ids[] = {
+ { .name = "dh2228fv" },
+ { .name = "ltc2488" },
+ { .name = "sx1301" },
+ { .name = "bk4" },
+ { .name = "dhcom-board" },
+ { .name = "m53cpld" },
+ { .name = "spi-petra" },
+ { .name = "spi-authenta" },
+ {},
+};
+MODULE_DEVICE_TABLE(spi, spidev_spi_ids);
+
#ifdef CONFIG_OF
static const struct of_device_id spidev_dt_ids[] = {
{ .compatible = "rohm,dh2228fv" },
@@ -818,6 +831,7 @@ static struct spi_driver spidev_spi_driver = {
},
.probe = spidev_probe,
.remove = spidev_remove,
+ .id_table = spidev_spi_ids,
/* NOTE: suspend/resume methods are not necessary here.
* We don't do anything except pass the requests to/from
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-24 03:41:13 +0300