diff options
Diffstat (limited to 'drivers/spi/spi-ti-qspi.c')
| -rw-r--r-- | drivers/spi/spi-ti-qspi.c | 87 |
1 files changed, 82 insertions, 5 deletions
diff --git a/drivers/spi/spi-ti-qspi.c b/drivers/spi/spi-ti-qspi.c index 66dcb6128539..366a3e5cca6b 100644 --- a/drivers/spi/spi-ti-qspi.c +++ b/drivers/spi/spi-ti-qspi.c @@ -80,8 +80,6 @@ struct ti_qspi { #define QSPI_COMPLETION_TIMEOUT msecs_to_jiffies(2000) -#define QSPI_FCLK 192000000 - /* Clock Control */ #define QSPI_CLK_EN (1 << 31) #define QSPI_CLK_DIV_MAX 0xffff @@ -316,6 +314,8 @@ static int qspi_read_msg(struct ti_qspi *qspi, struct spi_transfer *t, { int wlen; unsigned int cmd; + u32 rx; + u8 rxlen, rx_wlen; u8 *rxbuf; rxbuf = t->rx_buf; @@ -332,20 +332,67 @@ static int qspi_read_msg(struct ti_qspi *qspi, struct spi_transfer *t, break; } wlen = t->bits_per_word >> 3; /* in bytes */ + rx_wlen = wlen; while (count) { dev_dbg(qspi->dev, "rx cmd %08x dc %08x\n", cmd, qspi->dc); if (qspi_is_busy(qspi)) return -EBUSY; + switch (wlen) { + case 1: + /* + * Optimize the 8-bit words transfers, as used by + * the SPI flash devices. + */ + if (count >= QSPI_WLEN_MAX_BYTES) { + rxlen = QSPI_WLEN_MAX_BYTES; + } else { + rxlen = min(count, 4); + } + rx_wlen = rxlen << 3; + cmd &= ~QSPI_WLEN_MASK; + cmd |= QSPI_WLEN(rx_wlen); + break; + default: + rxlen = wlen; + break; + } + ti_qspi_write(qspi, cmd, QSPI_SPI_CMD_REG); if (ti_qspi_poll_wc(qspi)) { dev_err(qspi->dev, "read timed out\n"); return -ETIMEDOUT; } + switch (wlen) { case 1: - *rxbuf = readb(qspi->base + QSPI_SPI_DATA_REG); + /* + * Optimize the 8-bit words transfers, as used by + * the SPI flash devices. + */ + if (count >= QSPI_WLEN_MAX_BYTES) { + u32 *rxp = (u32 *) rxbuf; + rx = readl(qspi->base + QSPI_SPI_DATA_REG_3); + *rxp++ = be32_to_cpu(rx); + rx = readl(qspi->base + QSPI_SPI_DATA_REG_2); + *rxp++ = be32_to_cpu(rx); + rx = readl(qspi->base + QSPI_SPI_DATA_REG_1); + *rxp++ = be32_to_cpu(rx); + rx = readl(qspi->base + QSPI_SPI_DATA_REG); + *rxp++ = be32_to_cpu(rx); + } else { + u8 *rxp = rxbuf; + rx = readl(qspi->base + QSPI_SPI_DATA_REG); + if (rx_wlen >= 8) + *rxp++ = rx >> (rx_wlen - 8); + if (rx_wlen >= 16) + *rxp++ = rx >> (rx_wlen - 16); + if (rx_wlen >= 24) + *rxp++ = rx >> (rx_wlen - 24); + if (rx_wlen >= 32) + *rxp++ = rx; + } break; case 2: *((u16 *)rxbuf) = readw(qspi->base + QSPI_SPI_DATA_REG); @@ -354,8 +401,8 @@ static int qspi_read_msg(struct ti_qspi *qspi, struct spi_transfer *t, *((u32 *)rxbuf) = readl(qspi->base + QSPI_SPI_DATA_REG); break; } - rxbuf += wlen; - count -= wlen; + rxbuf += rxlen; + count -= rxlen; } return 0; @@ -527,6 +574,35 @@ static void ti_qspi_setup_mmap_read(struct spi_device *spi, u8 opcode, QSPI_SPI_SETUP_REG(spi->chip_select)); } +static int ti_qspi_adjust_op_size(struct spi_mem *mem, struct spi_mem_op *op) +{ + struct ti_qspi *qspi = spi_controller_get_devdata(mem->spi->master); + size_t max_len; + + if (op->data.dir == SPI_MEM_DATA_IN) { + if (op->addr.val < qspi->mmap_size) { + /* Limit MMIO to the mmaped region */ + if (op->addr.val + op->data.nbytes > qspi->mmap_size) { + max_len = qspi->mmap_size - op->addr.val; + op->data.nbytes = min((size_t) op->data.nbytes, + max_len); + } + } else { + /* + * Use fallback mode (SW generated transfers) above the + * mmaped region. + * Adjust size to comply with the QSPI max frame length. + */ + max_len = QSPI_FRAME; + max_len -= 1 + op->addr.nbytes + op->dummy.nbytes; + op->data.nbytes = min((size_t) op->data.nbytes, + max_len); + } + } + + return 0; +} + static int ti_qspi_exec_mem_op(struct spi_mem *mem, const struct spi_mem_op *op) { @@ -577,6 +653,7 @@ static int ti_qspi_exec_mem_op(struct spi_mem *mem, static const struct spi_controller_mem_ops ti_qspi_mem_ops = { .exec_op = ti_qspi_exec_mem_op, + .adjust_op_size = ti_qspi_adjust_op_size, }; static int ti_qspi_start_transfer_one(struct spi_master *master, |