summaryrefslogtreecommitdiff
path: root/drivers/spi/spi-pl022.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/spi/spi-pl022.c')
-rw-r--r--drivers/spi/spi-pl022.c108
1 files changed, 22 insertions, 86 deletions
diff --git a/drivers/spi/spi-pl022.c b/drivers/spi/spi-pl022.c
index fd74ddfbb686..0c9e3f270f05 100644
--- a/drivers/spi/spi-pl022.c
+++ b/drivers/spi/spi-pl022.c
@@ -31,8 +31,7 @@
#include <linux/dma-mapping.h>
#include <linux/scatterlist.h>
#include <linux/pm_runtime.h>
-#include <linux/gpio.h>
-#include <linux/of_gpio.h>
+#include <linux/of.h>
#include <linux/pinctrl/consumer.h>
/*
@@ -362,8 +361,8 @@ struct vendor_data {
* @sgt_tx: scattertable for the TX transfer
* @dummypage: a dummy page used for driving data on the bus with DMA
* @dma_running: indicates whether DMA is in operation
- * @cur_cs: current chip select (gpio)
- * @chipselects: list of chipselects (gpios)
+ * @cur_cs: current chip select index
+ * @cur_gpiod: current chip select GPIO descriptor
*/
struct pl022 {
struct amba_device *adev;
@@ -398,7 +397,7 @@ struct pl022 {
bool dma_running;
#endif
int cur_cs;
- int *chipselects;
+ struct gpio_desc *cur_gpiod;
};
/**
@@ -412,7 +411,6 @@ struct pl022 {
* @enable_dma: Whether to enable DMA or not
* @read: function ptr to be used to read when doing xfer for this chip
* @write: function ptr to be used to write when doing xfer for this chip
- * @cs_control: chip select callback provided by chip
* @xfer_type: polling/interrupt/DMA
*
* Runtime state of the SSP controller, maintained per chip,
@@ -427,23 +425,10 @@ struct chip_data {
bool enable_dma;
enum ssp_reading read;
enum ssp_writing write;
- void (*cs_control) (u32 command);
int xfer_type;
};
/**
- * null_cs_control - Dummy chip select function
- * @command: select/delect the chip
- *
- * If no chip select function is provided by client this is used as dummy
- * chip select
- */
-static void null_cs_control(u32 command)
-{
- pr_debug("pl022: dummy chip select control, CS=0x%x\n", command);
-}
-
-/**
* internal_cs_control - Control chip select signals via SSP_CSR.
* @pl022: SSP driver private data structure
* @command: select/delect the chip
@@ -468,10 +453,16 @@ static void pl022_cs_control(struct pl022 *pl022, u32 command)
{
if (pl022->vendor->internal_cs_ctrl)
internal_cs_control(pl022, command);
- else if (gpio_is_valid(pl022->cur_cs))
- gpio_set_value(pl022->cur_cs, command);
- else
- pl022->cur_chip->cs_control(command);
+ else if (pl022->cur_gpiod)
+ /*
+ * This needs to be inverted since with GPIOLIB in
+ * control, the inversion will be handled by
+ * GPIOLIB's active low handling. The "command"
+ * passed into this function will be SSP_CHIP_SELECT
+ * which is enum:ed to 0, so we need the inverse
+ * (1) to activate chip select.
+ */
+ gpiod_set_value(pl022->cur_gpiod, !command);
}
/**
@@ -1195,7 +1186,7 @@ err_no_txchan:
err_no_rxchan:
return err;
}
-
+
static void terminate_dma(struct pl022 *pl022)
{
struct dma_chan *rxchan = pl022->dma_rx_channel;
@@ -1596,7 +1587,9 @@ static int pl022_transfer_one_message(struct spi_master *master,
/* Setup the SPI using the per chip configuration */
pl022->cur_chip = spi_get_ctldata(msg->spi);
- pl022->cur_cs = pl022->chipselects[msg->spi->chip_select];
+ pl022->cur_cs = msg->spi->chip_select;
+ /* This is always available but may be set to -ENOENT */
+ pl022->cur_gpiod = msg->spi->cs_gpiod;
restore_state(pl022);
flush(pl022);
@@ -1820,16 +1813,15 @@ static int calculate_effective_freq(struct pl022 *pl022, int freq, struct
* supplies it.
*/
static const struct pl022_config_chip pl022_default_chip_info = {
- .com_mode = POLLING_TRANSFER,
+ .com_mode = INTERRUPT_TRANSFER,
.iface = SSP_INTERFACE_MOTOROLA_SPI,
- .hierarchy = SSP_SLAVE,
+ .hierarchy = SSP_MASTER,
.slave_tx_disable = DO_NOT_DRIVE_TX,
.rx_lev_trig = SSP_RX_1_OR_MORE_ELEM,
.tx_lev_trig = SSP_TX_1_OR_MORE_EMPTY_LOC,
.ctrl_len = SSP_BITS_8,
.wait_state = SSP_MWIRE_WAIT_ZERO,
.duplex = SSP_MICROWIRE_CHANNEL_FULL_DUPLEX,
- .cs_control = null_cs_control,
};
/**
@@ -1940,13 +1932,6 @@ static int pl022_setup(struct spi_device *spi)
/* Now set controller state based on controller data */
chip->xfer_type = chip_info->com_mode;
- if (!chip_info->cs_control) {
- chip->cs_control = null_cs_control;
- if (!gpio_is_valid(pl022->chipselects[spi->chip_select]))
- dev_warn(&spi->dev,
- "invalid chip select\n");
- } else
- chip->cs_control = chip_info->cs_control;
/* Check bits per word with vendor specific range */
if ((bits <= 3) || (bits > pl022->vendor->max_bpw)) {
@@ -2094,7 +2079,6 @@ pl022_platform_data_dt_get(struct device *dev)
{
struct device_node *np = dev->of_node;
struct pl022_ssp_controller *pd;
- u32 tmp = 0;
if (!np) {
dev_err(dev, "no dt node defined\n");
@@ -2107,8 +2091,6 @@ pl022_platform_data_dt_get(struct device *dev)
pd->bus_id = -1;
pd->enable_dma = 1;
- of_property_read_u32(np, "num-cs", &tmp);
- pd->num_chipselect = tmp;
of_property_read_u32(np, "pl022,autosuspend-delay",
&pd->autosuspend_delay);
pd->rt = of_property_read_bool(np, "pl022,rt");
@@ -2123,8 +2105,7 @@ static int pl022_probe(struct amba_device *adev, const struct amba_id *id)
dev_get_platdata(&adev->dev);
struct spi_master *master;
struct pl022 *pl022 = NULL; /*Data for this driver */
- struct device_node *np = adev->dev.of_node;
- int status = 0, i, num_cs;
+ int status = 0;
dev_info(&adev->dev,
"ARM PL022 driver, device ID: 0x%08x\n", adev->periphid);
@@ -2136,13 +2117,6 @@ static int pl022_probe(struct amba_device *adev, const struct amba_id *id)
return -ENODEV;
}
- if (platform_info->num_chipselect) {
- num_cs = platform_info->num_chipselect;
- } else {
- dev_err(dev, "probe: no chip select defined\n");
- return -ENODEV;
- }
-
/* Allocate master with space for data */
master = spi_alloc_master(dev, sizeof(struct pl022));
if (master == NULL) {
@@ -2155,19 +2129,12 @@ static int pl022_probe(struct amba_device *adev, const struct amba_id *id)
pl022->master_info = platform_info;
pl022->adev = adev;
pl022->vendor = id->data;
- pl022->chipselects = devm_kcalloc(dev, num_cs, sizeof(int),
- GFP_KERNEL);
- if (!pl022->chipselects) {
- status = -ENOMEM;
- goto err_no_mem;
- }
/*
* Bus Number Which has been Assigned to this SSP controller
* on this board
*/
master->bus_num = platform_info->bus_id;
- master->num_chipselect = num_cs;
master->cleanup = pl022_cleanup;
master->setup = pl022_setup;
master->auto_runtime_pm = true;
@@ -2175,36 +2142,7 @@ static int pl022_probe(struct amba_device *adev, const struct amba_id *id)
master->unprepare_transfer_hardware = pl022_unprepare_transfer_hardware;
master->rt = platform_info->rt;
master->dev.of_node = dev->of_node;
-
- if (platform_info->num_chipselect && platform_info->chipselects) {
- for (i = 0; i < num_cs; i++)
- pl022->chipselects[i] = platform_info->chipselects[i];
- } else if (pl022->vendor->internal_cs_ctrl) {
- for (i = 0; i < num_cs; i++)
- pl022->chipselects[i] = i;
- } else if (IS_ENABLED(CONFIG_OF)) {
- for (i = 0; i < num_cs; i++) {
- int cs_gpio = of_get_named_gpio(np, "cs-gpios", i);
-
- if (cs_gpio == -EPROBE_DEFER) {
- status = -EPROBE_DEFER;
- goto err_no_gpio;
- }
-
- pl022->chipselects[i] = cs_gpio;
-
- if (gpio_is_valid(cs_gpio)) {
- if (devm_gpio_request(dev, cs_gpio, "ssp-pl022"))
- dev_err(&adev->dev,
- "could not request %d gpio\n",
- cs_gpio);
- else if (gpio_direction_output(cs_gpio, 1))
- dev_err(&adev->dev,
- "could not set gpio %d as output\n",
- cs_gpio);
- }
- }
- }
+ master->use_gpio_descriptors = true;
/*
* Supports mode 0-3, loopback, and active low CS. Transfers are
@@ -2308,8 +2246,6 @@ static int pl022_probe(struct amba_device *adev, const struct amba_id *id)
err_no_ioremap:
amba_release_regions(adev);
err_no_ioregion:
- err_no_gpio:
- err_no_mem:
spi_master_put(master);
return status;
}
generated by cgit v1.2.3 (git 2.39.0) at 2025-11-01 00:59:33 +0300