diff options
Diffstat (limited to 'drivers/spi/spi-dw.h')
| -rw-r--r-- | drivers/spi/spi-dw.h | 89 |
1 files changed, 56 insertions, 33 deletions
diff --git a/drivers/spi/spi-dw.h b/drivers/spi/spi-dw.h index 151ba316619e..faf40cb66498 100644 --- a/drivers/spi/spi-dw.h +++ b/drivers/spi/spi-dw.h @@ -2,11 +2,13 @@ #ifndef DW_SPI_HEADER_H #define DW_SPI_HEADER_H +#include <linux/bits.h> #include <linux/completion.h> #include <linux/debugfs.h> #include <linux/irqreturn.h> #include <linux/io.h> #include <linux/scatterlist.h> +#include <linux/spi/spi-mem.h> /* Register offsets */ #define DW_SPI_CTRLR0 0x00 @@ -34,6 +36,7 @@ #define DW_SPI_IDR 0x58 #define DW_SPI_VERSION 0x5c #define DW_SPI_DR 0x60 +#define DW_SPI_RX_SAMPLE_DLY 0xf0 #define DW_SPI_CS_OVERRIDE 0xf4 /* Bit fields in CTRLR0 */ @@ -69,6 +72,16 @@ #define DWC_SSI_CTRLR0_FRF_OFFSET 6 #define DWC_SSI_CTRLR0_DFS_OFFSET 0 +/* + * For Keem Bay, CTRLR0[31] is used to select controller mode. + * 0: SSI is slave + * 1: SSI is master + */ +#define DWC_SSI_CTRLR0_KEEMBAY_MST BIT(31) + +/* Bit fields in CTRLR1 */ +#define SPI_NDF_MASK GENMASK(15, 0) + /* Bit fields in SR, 7 bits */ #define SR_MASK 0x7f /* cover 7 bits */ #define SR_BUSY (1 << 0) @@ -91,8 +104,12 @@ #define SPI_DMA_RDMAE (1 << 0) #define SPI_DMA_TDMAE (1 << 1) -/* TX RX interrupt level threshold, max can be 256 */ -#define SPI_INT_THRESHOLD 32 +#define SPI_WAIT_RETRIES 5 +#define SPI_BUF_SIZE \ + (sizeof_field(struct spi_mem_op, cmd.opcode) + \ + sizeof_field(struct spi_mem_op, addr.val) + 256) +#define SPI_GET_BYTE(_val, _idx) \ + ((_val) >> (BITS_PER_BYTE * (_idx)) & 0xff) enum dw_ssi_type { SSI_MOTO_SPI = 0, @@ -100,6 +117,19 @@ enum dw_ssi_type { SSI_NS_MICROWIRE, }; +/* DW SPI capabilities */ +#define DW_SPI_CAP_CS_OVERRIDE BIT(0) +#define DW_SPI_CAP_KEEMBAY_MST BIT(1) +#define DW_SPI_CAP_DWC_SSI BIT(2) + +/* Slave spi_transfer/spi_mem_op related */ +struct dw_spi_cfg { + u8 tmode; + u8 dfs; + u32 ndf; + u32 freq; +}; + struct dw_spi; struct dw_spi_dma_ops { int (*dma_init)(struct device *dev, struct dw_spi *dws); @@ -113,39 +143,43 @@ struct dw_spi_dma_ops { struct dw_spi { struct spi_controller *master; - enum dw_ssi_type type; void __iomem *regs; unsigned long paddr; int irq; u32 fifo_len; /* depth of the FIFO buffer */ + u32 max_mem_freq; /* max mem-ops bus freq */ u32 max_freq; /* max bus freq supported */ - int cs_override; + u32 caps; /* DW SPI capabilities */ + u32 reg_io_width; /* DR I/O width in bytes */ u16 bus_num; u16 num_cs; /* supported slave numbers */ void (*set_cs)(struct spi_device *spi, bool enable); - u32 (*update_cr0)(struct spi_controller *master, struct spi_device *spi, - struct spi_transfer *transfer); /* Current message transfer state info */ - size_t len; void *tx; - void *tx_end; - spinlock_t buf_lock; + unsigned int tx_len; void *rx; - void *rx_end; + unsigned int rx_len; + u8 buf[SPI_BUF_SIZE]; int dma_mapped; u8 n_bytes; /* current is a 1/2 bytes op */ irqreturn_t (*transfer_handler)(struct dw_spi *dws); u32 current_freq; /* frequency in hz */ + u32 cur_rx_sample_dly; + u32 def_rx_sample_dly_ns; + + /* Custom memory operations */ + struct spi_controller_mem_ops mem_ops; /* DMA info */ struct dma_chan *txchan; u32 txburst; struct dma_chan *rxchan; u32 rxburst; + u32 dma_sg_burst; unsigned long dma_chan_busy; dma_addr_t dma_addr; /* phy address of the Data register */ const struct dw_spi_dma_ops *dma_ops; @@ -162,29 +196,19 @@ static inline u32 dw_readl(struct dw_spi *dws, u32 offset) return __raw_readl(dws->regs + offset); } -static inline u16 dw_readw(struct dw_spi *dws, u32 offset) -{ - return __raw_readw(dws->regs + offset); -} - static inline void dw_writel(struct dw_spi *dws, u32 offset, u32 val) { __raw_writel(val, dws->regs + offset); } -static inline void dw_writew(struct dw_spi *dws, u32 offset, u16 val) -{ - __raw_writew(val, dws->regs + offset); -} - static inline u32 dw_read_io_reg(struct dw_spi *dws, u32 offset) { switch (dws->reg_io_width) { case 2: - return dw_readw(dws, offset); + return readw_relaxed(dws->regs + offset); case 4: default: - return dw_readl(dws, offset); + return readl_relaxed(dws->regs + offset); } } @@ -192,11 +216,11 @@ static inline void dw_write_io_reg(struct dw_spi *dws, u32 offset, u32 val) { switch (dws->reg_io_width) { case 2: - dw_writew(dws, offset, val); + writew_relaxed(val, dws->regs + offset); break; case 4: default: - dw_writel(dws, offset, val); + writel_relaxed(val, dws->regs + offset); break; } } @@ -230,14 +254,16 @@ static inline void spi_umask_intr(struct dw_spi *dws, u32 mask) } /* - * This does disable the SPI controller, interrupts, and re-enable the - * controller back. Transmit and receive FIFO buffers are cleared when the - * device is disabled. + * This disables the SPI controller, interrupts, clears the interrupts status + * and CS, then re-enables the controller back. Transmit and receive FIFO + * buffers are cleared when the device is disabled. */ static inline void spi_reset_chip(struct dw_spi *dws) { spi_enable_chip(dws, 0); spi_mask_intr(dws, 0xff); + dw_readl(dws, DW_SPI_ICR); + dw_writel(dws, DW_SPI_SER, 0); spi_enable_chip(dws, 1); } @@ -248,16 +274,13 @@ static inline void spi_shutdown_chip(struct dw_spi *dws) } extern void dw_spi_set_cs(struct spi_device *spi, bool enable); +extern void dw_spi_update_config(struct dw_spi *dws, struct spi_device *spi, + struct dw_spi_cfg *cfg); +extern int dw_spi_check_status(struct dw_spi *dws, bool raw); extern int dw_spi_add_host(struct device *dev, struct dw_spi *dws); extern void dw_spi_remove_host(struct dw_spi *dws); extern int dw_spi_suspend_host(struct dw_spi *dws); extern int dw_spi_resume_host(struct dw_spi *dws); -extern u32 dw_spi_update_cr0(struct spi_controller *master, - struct spi_device *spi, - struct spi_transfer *transfer); -extern u32 dw_spi_update_cr0_v1_01a(struct spi_controller *master, - struct spi_device *spi, - struct spi_transfer *transfer); #ifdef CONFIG_SPI_DW_DMA |