diff options
Diffstat (limited to 'drivers/spi/spi-bcm2835.c')
| -rw-r--r-- | drivers/spi/spi-bcm2835.c | 22 |
1 files changed, 14 insertions, 8 deletions
diff --git a/drivers/spi/spi-bcm2835.c b/drivers/spi/spi-bcm2835.c index 0d8c97502f14..3230d37fa89a 100644 --- a/drivers/spi/spi-bcm2835.c +++ b/drivers/spi/spi-bcm2835.c @@ -73,14 +73,18 @@ #define BCM2835_SPI_FIFO_SIZE 64 #define BCM2835_SPI_FIFO_SIZE_3_4 48 -#define BCM2835_SPI_POLLING_LIMIT_US 30 -#define BCM2835_SPI_POLLING_JIFFIES 2 #define BCM2835_SPI_DMA_MIN_LENGTH 96 #define BCM2835_SPI_MODE_BITS (SPI_CPOL | SPI_CPHA | SPI_CS_HIGH \ | SPI_NO_CS | SPI_3WIRE) #define DRV_NAME "spi-bcm2835" +/* define polling limits */ +unsigned int polling_limit_us = 30; +module_param(polling_limit_us, uint, 0664); +MODULE_PARM_DESC(polling_limit_us, + "time in us to run a transfer in polling mode\n"); + /** * struct bcm2835_spi - BCM2835 SPI controller * @regs: base address of register map @@ -711,8 +715,8 @@ static int bcm2835_spi_transfer_one_poll(struct spi_master *master, */ bcm2835_wr_fifo_blind(bs, BCM2835_SPI_FIFO_SIZE); - /* set the timeout */ - timeout = jiffies + BCM2835_SPI_POLLING_JIFFIES; + /* set the timeout to at least 2 jiffies */ + timeout = jiffies + 2 + HZ * polling_limit_us / 1000000; /* loop until finished the transfer */ while (bs->rx_len) { @@ -747,8 +751,8 @@ static int bcm2835_spi_transfer_one(struct spi_master *master, struct spi_transfer *tfr) { struct bcm2835_spi *bs = spi_master_get_devdata(master); - unsigned long spi_hz, clk_hz, cdiv; - unsigned long spi_used_hz; + unsigned long spi_hz, clk_hz, cdiv, spi_used_hz; + unsigned long hz_per_byte, byte_limit; u32 cs = bcm2835_rd(bs, BCM2835_SPI_CS); /* set clock */ @@ -795,9 +799,11 @@ static int bcm2835_spi_transfer_one(struct spi_master *master, * per byte per polling limit. E.g., we can transfer 1 byte in 30 us * per 300,000 Hz of bus clock. */ -#define HZ_PER_BYTE ((9 * 1000000) / BCM2835_SPI_POLLING_LIMIT_US) + hz_per_byte = polling_limit_us ? (9 * 1000000) / polling_limit_us : 0; + byte_limit = hz_per_byte ? spi_used_hz / hz_per_byte : 1; + /* run in polling mode for short transfers */ - if (tfr->len < spi_used_hz / HZ_PER_BYTE) + if (tfr->len < byte_limit) return bcm2835_spi_transfer_one_poll(master, spi, tfr, cs); /* run in dma mode if conditions are right |