diff options
Diffstat (limited to 'drivers/spi/spi-bcm-qspi.c')
-rw-r--r-- | drivers/spi/spi-bcm-qspi.c | 200 |
1 files changed, 131 insertions, 69 deletions
diff --git a/drivers/spi/spi-bcm-qspi.c b/drivers/spi/spi-bcm-qspi.c index 14f9dea3173f..b19722ba908c 100644 --- a/drivers/spi/spi-bcm-qspi.c +++ b/drivers/spi/spi-bcm-qspi.c @@ -89,7 +89,7 @@ #define BSPI_BPP_MODE_SELECT_MASK BIT(8) #define BSPI_BPP_ADDR_SELECT_MASK BIT(16) -#define BSPI_READ_LENGTH 256 +#define BSPI_READ_LENGTH 512 /* MSPI register offsets */ #define MSPI_SPCR0_LSB 0x000 @@ -192,9 +192,11 @@ struct bcm_qspi_dev_id { void *dev; }; + struct qspi_trans { struct spi_transfer *trans; int byte; + bool mspi_last_trans; }; struct bcm_qspi { @@ -371,7 +373,7 @@ static int bcm_qspi_bspi_set_flex_mode(struct bcm_qspi *qspi, int width, /* default mode, does not need flex_cmd */ flex_mode = 0; else - command = SPINOR_OP_READ4_FAST; + command = SPINOR_OP_READ_FAST_4B; break; case SPI_NBITS_DUAL: bpc = 0x00000001; @@ -384,7 +386,7 @@ static int bcm_qspi_bspi_set_flex_mode(struct bcm_qspi *qspi, int width, } else { command = SPINOR_OP_READ_1_1_2; if (spans_4byte) - command = SPINOR_OP_READ4_1_1_2; + command = SPINOR_OP_READ_1_1_2_4B; } break; case SPI_NBITS_QUAD: @@ -399,7 +401,7 @@ static int bcm_qspi_bspi_set_flex_mode(struct bcm_qspi *qspi, int width, } else { command = SPINOR_OP_READ_1_1_4; if (spans_4byte) - command = SPINOR_OP_READ4_1_1_4; + command = SPINOR_OP_READ_1_1_4_4B; } break; default: @@ -616,6 +618,16 @@ static int bcm_qspi_setup(struct spi_device *spi) return 0; } +static bool bcm_qspi_mspi_transfer_is_last(struct bcm_qspi *qspi, + struct qspi_trans *qt) +{ + if (qt->mspi_last_trans && + spi_transfer_is_last(qspi->master, qt->trans)) + return true; + else + return false; +} + static int update_qspi_trans_byte_count(struct bcm_qspi *qspi, struct qspi_trans *qt, int flags) { @@ -629,7 +641,6 @@ static int update_qspi_trans_byte_count(struct bcm_qspi *qspi, if (qt->byte >= qt->trans->len) { /* we're at the end of the spi_transfer */ - /* in TX mode, need to pause for a delay or CS change */ if (qt->trans->delay_usecs && (flags & TRANS_STATUS_BREAK_DELAY)) @@ -641,7 +652,7 @@ static int update_qspi_trans_byte_count(struct bcm_qspi *qspi, goto done; dev_dbg(&qspi->pdev->dev, "advance msg exit\n"); - if (spi_transfer_is_last(qspi->master, qt->trans)) + if (bcm_qspi_mspi_transfer_is_last(qspi, qt)) ret = TRANS_STATUS_BREAK_EOM; else ret = TRANS_STATUS_BREAK_NO_BYTES; @@ -813,7 +824,7 @@ static int bcm_qspi_bspi_flash_read(struct spi_device *spi, struct spi_flash_read_message *msg) { struct bcm_qspi *qspi = spi_master_get_devdata(spi->master); - u32 addr = 0, len, len_words; + u32 addr = 0, len, rdlen, len_words; int ret = 0; unsigned long timeo = msecs_to_jiffies(100); struct bcm_qspi_soc_intc *soc_intc = qspi->soc_intc; @@ -826,7 +837,7 @@ static int bcm_qspi_bspi_flash_read(struct spi_device *spi, bcm_qspi_write(qspi, MSPI, MSPI_WRITE_LOCK, 0); /* - * when using flex mode mode we need to send + * when using flex mode we need to send * the upper address byte to bspi */ if (bcm_qspi_bspi_ver_three(qspi) == false) { @@ -840,48 +851,127 @@ static int bcm_qspi_bspi_flash_read(struct spi_device *spi, else addr = msg->from & 0x00ffffff; - /* set BSPI RAF buffer max read length */ - len = msg->len; - if (len > BSPI_READ_LENGTH) - len = BSPI_READ_LENGTH; - if (bcm_qspi_bspi_ver_three(qspi) == true) addr = (addr + 0xc00000) & 0xffffff; - reinit_completion(&qspi->bspi_done); - bcm_qspi_enable_bspi(qspi); - len_words = (len + 3) >> 2; - qspi->bspi_rf_msg = msg; - qspi->bspi_rf_msg_status = 0; + /* + * read into the entire buffer by breaking the reads + * into RAF buffer read lengths + */ + len = msg->len; qspi->bspi_rf_msg_idx = 0; - qspi->bspi_rf_msg_len = len; - dev_dbg(&qspi->pdev->dev, "bspi xfr addr 0x%x len 0x%x", addr, len); - bcm_qspi_write(qspi, BSPI, BSPI_RAF_START_ADDR, addr); - bcm_qspi_write(qspi, BSPI, BSPI_RAF_NUM_WORDS, len_words); - bcm_qspi_write(qspi, BSPI, BSPI_RAF_WATERMARK, 0); + do { + if (len > BSPI_READ_LENGTH) + rdlen = BSPI_READ_LENGTH; + else + rdlen = len; + + reinit_completion(&qspi->bspi_done); + bcm_qspi_enable_bspi(qspi); + len_words = (rdlen + 3) >> 2; + qspi->bspi_rf_msg = msg; + qspi->bspi_rf_msg_status = 0; + qspi->bspi_rf_msg_len = rdlen; + dev_dbg(&qspi->pdev->dev, + "bspi xfr addr 0x%x len 0x%x", addr, rdlen); + bcm_qspi_write(qspi, BSPI, BSPI_RAF_START_ADDR, addr); + bcm_qspi_write(qspi, BSPI, BSPI_RAF_NUM_WORDS, len_words); + bcm_qspi_write(qspi, BSPI, BSPI_RAF_WATERMARK, 0); + if (qspi->soc_intc) { + /* + * clear soc MSPI and BSPI interrupts and enable + * BSPI interrupts. + */ + soc_intc->bcm_qspi_int_ack(soc_intc, MSPI_BSPI_DONE); + soc_intc->bcm_qspi_int_set(soc_intc, BSPI_DONE, true); + } - if (qspi->soc_intc) { - /* - * clear soc MSPI and BSPI interrupts and enable - * BSPI interrupts. - */ - soc_intc->bcm_qspi_int_ack(soc_intc, MSPI_BSPI_DONE); - soc_intc->bcm_qspi_int_set(soc_intc, BSPI_DONE, true); + /* Must flush previous writes before starting BSPI operation */ + mb(); + bcm_qspi_bspi_lr_start(qspi); + if (!wait_for_completion_timeout(&qspi->bspi_done, timeo)) { + dev_err(&qspi->pdev->dev, "timeout waiting for BSPI\n"); + ret = -ETIMEDOUT; + break; + } + + /* set msg return length */ + msg->retlen += rdlen; + addr += rdlen; + len -= rdlen; + } while (len); + + return ret; +} + +static int bcm_qspi_transfer_one(struct spi_master *master, + struct spi_device *spi, + struct spi_transfer *trans) +{ + struct bcm_qspi *qspi = spi_master_get_devdata(master); + int slots; + unsigned long timeo = msecs_to_jiffies(100); + + bcm_qspi_chip_select(qspi, spi->chip_select); + qspi->trans_pos.trans = trans; + qspi->trans_pos.byte = 0; + + while (qspi->trans_pos.byte < trans->len) { + reinit_completion(&qspi->mspi_done); + + slots = write_to_hw(qspi, spi); + if (!wait_for_completion_timeout(&qspi->mspi_done, timeo)) { + dev_err(&qspi->pdev->dev, "timeout waiting for MSPI\n"); + return -ETIMEDOUT; + } + + read_from_hw(qspi, slots); } - /* Must flush previous writes before starting BSPI operation */ - mb(); + return 0; +} - bcm_qspi_bspi_lr_start(qspi); - if (!wait_for_completion_timeout(&qspi->bspi_done, timeo)) { - dev_err(&qspi->pdev->dev, "timeout waiting for BSPI\n"); - ret = -ETIMEDOUT; - } else { - /* set the return length for the caller */ - msg->retlen = len; +static int bcm_qspi_mspi_flash_read(struct spi_device *spi, + struct spi_flash_read_message *msg) +{ + struct bcm_qspi *qspi = spi_master_get_devdata(spi->master); + struct spi_transfer t[2]; + u8 cmd[6]; + int ret; + + memset(cmd, 0, sizeof(cmd)); + memset(t, 0, sizeof(t)); + + /* tx */ + /* opcode is in cmd[0] */ + cmd[0] = msg->read_opcode; + cmd[1] = msg->from >> (msg->addr_width * 8 - 8); + cmd[2] = msg->from >> (msg->addr_width * 8 - 16); + cmd[3] = msg->from >> (msg->addr_width * 8 - 24); + cmd[4] = msg->from >> (msg->addr_width * 8 - 32); + t[0].tx_buf = cmd; + t[0].len = msg->addr_width + msg->dummy_bytes + 1; + t[0].bits_per_word = spi->bits_per_word; + t[0].tx_nbits = msg->opcode_nbits; + /* lets mspi know that this is not last transfer */ + qspi->trans_pos.mspi_last_trans = false; + ret = bcm_qspi_transfer_one(spi->master, spi, &t[0]); + + /* rx */ + qspi->trans_pos.mspi_last_trans = true; + if (!ret) { + /* rx */ + t[1].rx_buf = msg->buf; + t[1].len = msg->len; + t[1].rx_nbits = msg->data_nbits; + t[1].bits_per_word = spi->bits_per_word; + ret = bcm_qspi_transfer_one(spi->master, spi, &t[1]); } + if (!ret) + msg->retlen = msg->len; + return ret; } @@ -918,8 +1008,7 @@ static int bcm_qspi_flash_read(struct spi_device *spi, mspi_read = true; if (mspi_read) - /* this will make the m25p80 read to fallback to mspi read */ - return -EAGAIN; + return bcm_qspi_mspi_flash_read(spi, msg); io_width = msg->data_nbits ? msg->data_nbits : SPI_NBITS_SINGLE; addrlen = msg->addr_width; @@ -931,33 +1020,6 @@ static int bcm_qspi_flash_read(struct spi_device *spi, return ret; } -static int bcm_qspi_transfer_one(struct spi_master *master, - struct spi_device *spi, - struct spi_transfer *trans) -{ - struct bcm_qspi *qspi = spi_master_get_devdata(master); - int slots; - unsigned long timeo = msecs_to_jiffies(100); - - bcm_qspi_chip_select(qspi, spi->chip_select); - qspi->trans_pos.trans = trans; - qspi->trans_pos.byte = 0; - - while (qspi->trans_pos.byte < trans->len) { - reinit_completion(&qspi->mspi_done); - - slots = write_to_hw(qspi, spi); - if (!wait_for_completion_timeout(&qspi->mspi_done, timeo)) { - dev_err(&qspi->pdev->dev, "timeout waiting for MSPI\n"); - return -ETIMEDOUT; - } - - read_from_hw(qspi, slots); - } - - return 0; -} - static void bcm_qspi_cleanup(struct spi_device *spi) { struct bcm_qspi_parms *xp = spi_get_ctldata(spi); @@ -1187,6 +1249,7 @@ int bcm_qspi_probe(struct platform_device *pdev, qspi->pdev = pdev; qspi->trans_pos.trans = NULL; qspi->trans_pos.byte = 0; + qspi->trans_pos.mspi_last_trans = true; qspi->master = master; master->bus_num = -1; @@ -1345,7 +1408,6 @@ int bcm_qspi_remove(struct platform_device *pdev) { struct bcm_qspi *qspi = platform_get_drvdata(pdev); - platform_set_drvdata(pdev, NULL); bcm_qspi_hw_uninit(qspi); clk_disable_unprepare(qspi->clk); kfree(qspi->dev_ids); |