diff options
Diffstat (limited to 'drivers/scsi/mpt3sas/mpt3sas_base.c')
| -rw-r--r-- | drivers/scsi/mpt3sas/mpt3sas_base.c | 668 |
1 files changed, 509 insertions, 159 deletions
diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.c b/drivers/scsi/mpt3sas/mpt3sas_base.c index d4f1dcdb8361..11393ebf1a68 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_base.c +++ b/drivers/scsi/mpt3sas/mpt3sas_base.c @@ -108,9 +108,12 @@ _scsih_set_fwfault_debug(const char *val, struct kernel_param *kp) if (ret) return ret; + /* global ioc spinlock to protect controller list on list operations */ pr_info("setting fwfault_debug(%d)\n", mpt3sas_fwfault_debug); + spin_lock(&gioc_lock); list_for_each_entry(ioc, &mpt3sas_ioc_list, list) ioc->fwfault_debug = mpt3sas_fwfault_debug; + spin_unlock(&gioc_lock); return 0; } module_param_call(mpt3sas_fwfault_debug, _scsih_set_fwfault_debug, @@ -157,7 +160,7 @@ _base_fault_reset_work(struct work_struct *work) spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags); - if (ioc->shost_recovery) + if (ioc->shost_recovery || ioc->pci_error_recovery) goto rearm_timer; spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags); @@ -166,6 +169,20 @@ _base_fault_reset_work(struct work_struct *work) pr_err(MPT3SAS_FMT "SAS host is non-operational !!!!\n", ioc->name); + /* It may be possible that EEH recovery can resolve some of + * pci bus failure issues rather removing the dead ioc function + * by considering controller is in a non-operational state. So + * here priority is given to the EEH recovery. If it doesn't + * not resolve this issue, mpt3sas driver will consider this + * controller to non-operational state and remove the dead ioc + * function. + */ + if (ioc->non_operational_loop++ < 5) { + spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, + flags); + goto rearm_timer; + } + /* * Call _scsih_flush_pending_cmds callback so that we flush all * pending commands back to OS. This call is required to aovid @@ -181,7 +198,7 @@ _base_fault_reset_work(struct work_struct *work) ioc->remove_host = 1; /*Remove the Dead Host */ p = kthread_run(mpt3sas_remove_dead_ioc_func, ioc, - "mpt3sas_dead_ioc_%d", ioc->id); + "%s_dead_ioc_%d", ioc->driver_name, ioc->id); if (IS_ERR(p)) pr_err(MPT3SAS_FMT "%s: Running mpt3sas_dead_ioc thread failed !!!!\n", @@ -193,6 +210,8 @@ _base_fault_reset_work(struct work_struct *work) return; /* don't rearm timer */ } + ioc->non_operational_loop = 0; + if ((doorbell & MPI2_IOC_STATE_MASK) != MPI2_IOC_STATE_OPERATIONAL) { rc = mpt3sas_base_hard_reset_handler(ioc, CAN_SLEEP, FORCE_BIG_HAMMER); @@ -235,7 +254,8 @@ mpt3sas_base_start_watchdog(struct MPT3SAS_ADAPTER *ioc) INIT_DELAYED_WORK(&ioc->fault_reset_work, _base_fault_reset_work); snprintf(ioc->fault_reset_work_q_name, - sizeof(ioc->fault_reset_work_q_name), "poll_%d_status", ioc->id); + sizeof(ioc->fault_reset_work_q_name), "poll_%s%d_status", + ioc->driver_name, ioc->id); ioc->fault_reset_work_q = create_singlethread_workqueue(ioc->fault_reset_work_q_name); if (!ioc->fault_reset_work_q) { @@ -324,7 +344,6 @@ mpt3sas_halt_firmware(struct MPT3SAS_ADAPTER *ioc) panic("panic in %s\n", __func__); } -#ifdef CONFIG_SCSI_MPT3SAS_LOGGING /** * _base_sas_ioc_info - verbose translation of the ioc status * @ioc: per adapter object @@ -578,7 +597,8 @@ _base_display_event_data(struct MPT3SAS_ADAPTER *ioc, desc = "Device Status Change"; break; case MPI2_EVENT_IR_OPERATION_STATUS: - desc = "IR Operation Status"; + if (!ioc->hide_ir_msg) + desc = "IR Operation Status"; break; case MPI2_EVENT_SAS_DISCOVERY: { @@ -609,16 +629,20 @@ _base_display_event_data(struct MPT3SAS_ADAPTER *ioc, desc = "SAS Enclosure Device Status Change"; break; case MPI2_EVENT_IR_VOLUME: - desc = "IR Volume"; + if (!ioc->hide_ir_msg) + desc = "IR Volume"; break; case MPI2_EVENT_IR_PHYSICAL_DISK: - desc = "IR Physical Disk"; + if (!ioc->hide_ir_msg) + desc = "IR Physical Disk"; break; case MPI2_EVENT_IR_CONFIGURATION_CHANGE_LIST: - desc = "IR Configuration Change List"; + if (!ioc->hide_ir_msg) + desc = "IR Configuration Change List"; break; case MPI2_EVENT_LOG_ENTRY_ADDED: - desc = "Log Entry Added"; + if (!ioc->hide_ir_msg) + desc = "Log Entry Added"; break; case MPI2_EVENT_TEMP_THRESHOLD: desc = "Temperature Threshold"; @@ -630,7 +654,6 @@ _base_display_event_data(struct MPT3SAS_ADAPTER *ioc, pr_info(MPT3SAS_FMT "%s\n", ioc->name, desc); } -#endif /** * _base_sas_log_info - verbose translation of firmware log info @@ -675,7 +698,10 @@ _base_sas_log_info(struct MPT3SAS_ADAPTER *ioc , u32 log_info) originator_str = "PL"; break; case 2: - originator_str = "IR"; + if (!ioc->hide_ir_msg) + originator_str = "IR"; + else + originator_str = "WarpDrive"; break; } @@ -710,13 +736,13 @@ _base_display_reply_info(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index, return; } ioc_status = le16_to_cpu(mpi_reply->IOCStatus); -#ifdef CONFIG_SCSI_MPT3SAS_LOGGING + if ((ioc_status & MPI2_IOCSTATUS_MASK) && (ioc->logging_level & MPT_DEBUG_REPLY)) { _base_sas_ioc_info(ioc , mpi_reply, mpt3sas_base_get_msg_frame(ioc, smid)); } -#endif + if (ioc_status & MPI2_IOCSTATUS_FLAG_LOG_INFO_AVAILABLE) { loginfo = le32_to_cpu(mpi_reply->IOCLogInfo); _base_sas_log_info(ioc, loginfo); @@ -783,9 +809,9 @@ _base_async_event(struct MPT3SAS_ADAPTER *ioc, u8 msix_index, u32 reply) return 1; if (mpi_reply->Function != MPI2_FUNCTION_EVENT_NOTIFICATION) return 1; -#ifdef CONFIG_SCSI_MPT3SAS_LOGGING + _base_display_event_data(ioc, mpi_reply); -#endif + if (!(mpi_reply->AckRequired & MPI2_EVENT_NOTIFICATION_ACK_REQUIRED)) goto out; smid = mpt3sas_base_get_smid(ioc, ioc->base_cb_idx); @@ -1009,6 +1035,12 @@ _base_interrupt(int irq, void *bus_id) } wmb(); + if (ioc->is_warpdrive) { + writel(reply_q->reply_post_host_index, + ioc->reply_post_host_index[msix_index]); + atomic_dec(&reply_q->busy); + return IRQ_HANDLED; + } /* Update Reply Post Host Index. * For those HBA's which support combined reply queue feature @@ -1320,6 +1352,149 @@ _base_build_zero_len_sge_ieee(struct MPT3SAS_ADAPTER *ioc, void *paddr) } /** + * _base_build_sg_scmd - main sg creation routine + * @ioc: per adapter object + * @scmd: scsi command + * @smid: system request message index + * Context: none. + * + * The main routine that builds scatter gather table from a given + * scsi request sent via the .queuecommand main handler. + * + * Returns 0 success, anything else error + */ +static int +_base_build_sg_scmd(struct MPT3SAS_ADAPTER *ioc, + struct scsi_cmnd *scmd, u16 smid) +{ + Mpi2SCSIIORequest_t *mpi_request; + dma_addr_t chain_dma; + struct scatterlist *sg_scmd; + void *sg_local, *chain; + u32 chain_offset; + u32 chain_length; + u32 chain_flags; + int sges_left; + u32 sges_in_segment; + u32 sgl_flags; + u32 sgl_flags_last_element; + u32 sgl_flags_end_buffer; + struct chain_tracker *chain_req; + + mpi_request = mpt3sas_base_get_msg_frame(ioc, smid); + + /* init scatter gather flags */ + sgl_flags = MPI2_SGE_FLAGS_SIMPLE_ELEMENT; + if (scmd->sc_data_direction == DMA_TO_DEVICE) + sgl_flags |= MPI2_SGE_FLAGS_HOST_TO_IOC; + sgl_flags_last_element = (sgl_flags | MPI2_SGE_FLAGS_LAST_ELEMENT) + << MPI2_SGE_FLAGS_SHIFT; + sgl_flags_end_buffer = (sgl_flags | MPI2_SGE_FLAGS_LAST_ELEMENT | + MPI2_SGE_FLAGS_END_OF_BUFFER | MPI2_SGE_FLAGS_END_OF_LIST) + << MPI2_SGE_FLAGS_SHIFT; + sgl_flags = sgl_flags << MPI2_SGE_FLAGS_SHIFT; + + sg_scmd = scsi_sglist(scmd); + sges_left = scsi_dma_map(scmd); + if (sges_left < 0) { + sdev_printk(KERN_ERR, scmd->device, + "pci_map_sg failed: request for %d bytes!\n", + scsi_bufflen(scmd)); + return -ENOMEM; + } + + sg_local = &mpi_request->SGL; + sges_in_segment = ioc->max_sges_in_main_message; + if (sges_left <= sges_in_segment) + goto fill_in_last_segment; + + mpi_request->ChainOffset = (offsetof(Mpi2SCSIIORequest_t, SGL) + + (sges_in_segment * ioc->sge_size))/4; + + /* fill in main message segment when there is a chain following */ + while (sges_in_segment) { + if (sges_in_segment == 1) + ioc->base_add_sg_single(sg_local, + sgl_flags_last_element | sg_dma_len(sg_scmd), + sg_dma_address(sg_scmd)); + else + ioc->base_add_sg_single(sg_local, sgl_flags | + sg_dma_len(sg_scmd), sg_dma_address(sg_scmd)); + sg_scmd = sg_next(sg_scmd); + sg_local += ioc->sge_size; + sges_left--; + sges_in_segment--; + } + + /* initializing the chain flags and pointers */ + chain_flags = MPI2_SGE_FLAGS_CHAIN_ELEMENT << MPI2_SGE_FLAGS_SHIFT; + chain_req = _base_get_chain_buffer_tracker(ioc, smid); + if (!chain_req) + return -1; + chain = chain_req->chain_buffer; + chain_dma = chain_req->chain_buffer_dma; + do { + sges_in_segment = (sges_left <= + ioc->max_sges_in_chain_message) ? sges_left : + ioc->max_sges_in_chain_message; + chain_offset = (sges_left == sges_in_segment) ? + 0 : (sges_in_segment * ioc->sge_size)/4; + chain_length = sges_in_segment * ioc->sge_size; + if (chain_offset) { + chain_offset = chain_offset << + MPI2_SGE_CHAIN_OFFSET_SHIFT; + chain_length += ioc->sge_size; + } + ioc->base_add_sg_single(sg_local, chain_flags | chain_offset | + chain_length, chain_dma); + sg_local = chain; + if (!chain_offset) + goto fill_in_last_segment; + + /* fill in chain segments */ + while (sges_in_segment) { + if (sges_in_segment == 1) + ioc->base_add_sg_single(sg_local, + sgl_flags_last_element | + sg_dma_len(sg_scmd), + sg_dma_address(sg_scmd)); + else + ioc->base_add_sg_single(sg_local, sgl_flags | + sg_dma_len(sg_scmd), + sg_dma_address(sg_scmd)); + sg_scmd = sg_next(sg_scmd); + sg_local += ioc->sge_size; + sges_left--; + sges_in_segment--; + } + + chain_req = _base_get_chain_buffer_tracker(ioc, smid); + if (!chain_req) + return -1; + chain = chain_req->chain_buffer; + chain_dma = chain_req->chain_buffer_dma; + } while (1); + + + fill_in_last_segment: + + /* fill the last segment */ + while (sges_left) { + if (sges_left == 1) + ioc->base_add_sg_single(sg_local, sgl_flags_end_buffer | + sg_dma_len(sg_scmd), sg_dma_address(sg_scmd)); + else + ioc->base_add_sg_single(sg_local, sgl_flags | + sg_dma_len(sg_scmd), sg_dma_address(sg_scmd)); + sg_scmd = sg_next(sg_scmd); + sg_local += ioc->sge_size; + sges_left--; + } + + return 0; +} + +/** * _base_build_sg_scmd_ieee - main sg creation routine for IEEE format * @ioc: per adapter object * @scmd: scsi command @@ -1571,6 +1746,14 @@ _base_check_enable_msix(struct MPT3SAS_ADAPTER *ioc) int base; u16 message_control; + /* Check whether controller SAS2008 B0 controller, + * if it is SAS2008 B0 controller use IO-APIC instead of MSIX + */ + if (ioc->pdev->device == MPI2_MFGPAGE_DEVID_SAS2008 && + ioc->pdev->revision == SAS2_PCI_DEVICE_B0_REVISION) { + return -EINVAL; + } + base = pci_find_capability(ioc->pdev, PCI_CAP_ID_MSIX); if (!base) { dfailprintk(ioc, pr_info(MPT3SAS_FMT "msix not supported\n", @@ -1579,9 +1762,19 @@ _base_check_enable_msix(struct MPT3SAS_ADAPTER *ioc) } /* get msix vector count */ - - pci_read_config_word(ioc->pdev, base + 2, &message_control); - ioc->msix_vector_count = (message_control & 0x3FF) + 1; + /* NUMA_IO not supported for older controllers */ + if (ioc->pdev->device == MPI2_MFGPAGE_DEVID_SAS2004 || + ioc->pdev->device == MPI2_MFGPAGE_DEVID_SAS2008 || + ioc->pdev->device == MPI2_MFGPAGE_DEVID_SAS2108_1 || + ioc->pdev->device == MPI2_MFGPAGE_DEVID_SAS2108_2 || + ioc->pdev->device == MPI2_MFGPAGE_DEVID_SAS2108_3 || + ioc->pdev->device == MPI2_MFGPAGE_DEVID_SAS2116_1 || + ioc->pdev->device == MPI2_MFGPAGE_DEVID_SAS2116_2) + ioc->msix_vector_count = 1; + else { + pci_read_config_word(ioc->pdev, base + 2, &message_control); + ioc->msix_vector_count = (message_control & 0x3FF) + 1; + } dinitprintk(ioc, pr_info(MPT3SAS_FMT "msix is supported, vector_count(%d)\n", ioc->name, ioc->msix_vector_count)); @@ -1643,10 +1836,10 @@ _base_request_irq(struct MPT3SAS_ADAPTER *ioc, u8 index, u32 vector) atomic_set(&reply_q->busy, 0); if (ioc->msix_enable) snprintf(reply_q->name, MPT_NAME_LENGTH, "%s%d-msix%d", - MPT3SAS_DRIVER_NAME, ioc->id, index); + ioc->driver_name, ioc->id, index); else snprintf(reply_q->name, MPT_NAME_LENGTH, "%s%d", - MPT3SAS_DRIVER_NAME, ioc->id); + ioc->driver_name, ioc->id); r = request_irq(vector, _base_interrupt, IRQF_SHARED, reply_q->name, reply_q); if (r) { @@ -1872,7 +2065,7 @@ mpt3sas_base_map_resources(struct MPT3SAS_ADAPTER *ioc) if (pci_request_selected_regions(pdev, ioc->bars, - MPT3SAS_DRIVER_NAME)) { + ioc->driver_name)) { pr_warn(MPT3SAS_FMT "pci_request_selected_regions: failed\n", ioc->name); ioc->bars = 0; @@ -2158,6 +2351,7 @@ mpt3sas_base_free_smid(struct MPT3SAS_ADAPTER *ioc, u16 smid) } ioc->scsi_lookup[i].cb_idx = 0xFF; ioc->scsi_lookup[i].scmd = NULL; + ioc->scsi_lookup[i].direct_io = 0; list_add(&ioc->scsi_lookup[i].tracker_list, &ioc->free_list); spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags); @@ -2318,143 +2512,261 @@ mpt3sas_base_put_smid_default(struct MPT3SAS_ADAPTER *ioc, u16 smid) } /** - * _base_display_intel_branding - Display branding string + * _base_display_OEMs_branding - Display branding string * @ioc: per adapter object * * Return nothing. */ static void -_base_display_intel_branding(struct MPT3SAS_ADAPTER *ioc) +_base_display_OEMs_branding(struct MPT3SAS_ADAPTER *ioc) { if (ioc->pdev->subsystem_vendor != PCI_VENDOR_ID_INTEL) return; - switch (ioc->pdev->device) { - case MPI25_MFGPAGE_DEVID_SAS3008: - switch (ioc->pdev->subsystem_device) { - case MPT3SAS_INTEL_RMS3JC080_SSDID: - pr_info(MPT3SAS_FMT "%s\n", ioc->name, - MPT3SAS_INTEL_RMS3JC080_BRANDING); - break; - - case MPT3SAS_INTEL_RS3GC008_SSDID: - pr_info(MPT3SAS_FMT "%s\n", ioc->name, - MPT3SAS_INTEL_RS3GC008_BRANDING); - break; - case MPT3SAS_INTEL_RS3FC044_SSDID: - pr_info(MPT3SAS_FMT "%s\n", ioc->name, - MPT3SAS_INTEL_RS3FC044_BRANDING); - break; - case MPT3SAS_INTEL_RS3UC080_SSDID: - pr_info(MPT3SAS_FMT "%s\n", ioc->name, - MPT3SAS_INTEL_RS3UC080_BRANDING); + switch (ioc->pdev->subsystem_vendor) { + case PCI_VENDOR_ID_INTEL: + switch (ioc->pdev->device) { + case MPI2_MFGPAGE_DEVID_SAS2008: + switch (ioc->pdev->subsystem_device) { + case MPT2SAS_INTEL_RMS2LL080_SSDID: + pr_info(MPT3SAS_FMT "%s\n", ioc->name, + MPT2SAS_INTEL_RMS2LL080_BRANDING); + break; + case MPT2SAS_INTEL_RMS2LL040_SSDID: + pr_info(MPT3SAS_FMT "%s\n", ioc->name, + MPT2SAS_INTEL_RMS2LL040_BRANDING); + break; + case MPT2SAS_INTEL_SSD910_SSDID: + pr_info(MPT3SAS_FMT "%s\n", ioc->name, + MPT2SAS_INTEL_SSD910_BRANDING); + break; + default: + pr_info(MPT3SAS_FMT + "Intel(R) Controller: Subsystem ID: 0x%X\n", + ioc->name, ioc->pdev->subsystem_device); + break; + } + case MPI2_MFGPAGE_DEVID_SAS2308_2: + switch (ioc->pdev->subsystem_device) { + case MPT2SAS_INTEL_RS25GB008_SSDID: + pr_info(MPT3SAS_FMT "%s\n", ioc->name, + MPT2SAS_INTEL_RS25GB008_BRANDING); + break; + case MPT2SAS_INTEL_RMS25JB080_SSDID: + pr_info(MPT3SAS_FMT "%s\n", ioc->name, + MPT2SAS_INTEL_RMS25JB080_BRANDING); + break; + case MPT2SAS_INTEL_RMS25JB040_SSDID: + pr_info(MPT3SAS_FMT "%s\n", ioc->name, + MPT2SAS_INTEL_RMS25JB040_BRANDING); + break; + case MPT2SAS_INTEL_RMS25KB080_SSDID: + pr_info(MPT3SAS_FMT "%s\n", ioc->name, + MPT2SAS_INTEL_RMS25KB080_BRANDING); + break; + case MPT2SAS_INTEL_RMS25KB040_SSDID: + pr_info(MPT3SAS_FMT "%s\n", ioc->name, + MPT2SAS_INTEL_RMS25KB040_BRANDING); + break; + case MPT2SAS_INTEL_RMS25LB040_SSDID: + pr_info(MPT3SAS_FMT "%s\n", ioc->name, + MPT2SAS_INTEL_RMS25LB040_BRANDING); + break; + case MPT2SAS_INTEL_RMS25LB080_SSDID: + pr_info(MPT3SAS_FMT "%s\n", ioc->name, + MPT2SAS_INTEL_RMS25LB080_BRANDING); + break; + default: + pr_info(MPT3SAS_FMT + "Intel(R) Controller: Subsystem ID: 0x%X\n", + ioc->name, ioc->pdev->subsystem_device); + break; + } + case MPI25_MFGPAGE_DEVID_SAS3008: + switch (ioc->pdev->subsystem_device) { + case MPT3SAS_INTEL_RMS3JC080_SSDID: + pr_info(MPT3SAS_FMT "%s\n", ioc->name, + MPT3SAS_INTEL_RMS3JC080_BRANDING); + break; + + case MPT3SAS_INTEL_RS3GC008_SSDID: + pr_info(MPT3SAS_FMT "%s\n", ioc->name, + MPT3SAS_INTEL_RS3GC008_BRANDING); + break; + case MPT3SAS_INTEL_RS3FC044_SSDID: + pr_info(MPT3SAS_FMT "%s\n", ioc->name, + MPT3SAS_INTEL_RS3FC044_BRANDING); + break; + case MPT3SAS_INTEL_RS3UC080_SSDID: + pr_info(MPT3SAS_FMT "%s\n", ioc->name, + MPT3SAS_INTEL_RS3UC080_BRANDING); + break; + default: + pr_info(MPT3SAS_FMT + "Intel(R) Controller: Subsystem ID: 0x%X\n", + ioc->name, ioc->pdev->subsystem_device); + break; + } break; default: pr_info(MPT3SAS_FMT - "Intel(R) Controller: Subsystem ID: 0x%X\n", - ioc->name, ioc->pdev->subsystem_device); + "Intel(R) Controller: Subsystem ID: 0x%X\n", + ioc->name, ioc->pdev->subsystem_device); break; } break; - default: - pr_info(MPT3SAS_FMT - "Intel(R) Controller: Subsystem ID: 0x%X\n", - ioc->name, ioc->pdev->subsystem_device); - break; - } -} - - - -/** - * _base_display_dell_branding - Display branding string - * @ioc: per adapter object - * - * Return nothing. - */ -static void -_base_display_dell_branding(struct MPT3SAS_ADAPTER *ioc) -{ - if (ioc->pdev->subsystem_vendor != PCI_VENDOR_ID_DELL) - return; - - switch (ioc->pdev->device) { - case MPI25_MFGPAGE_DEVID_SAS3008: - switch (ioc->pdev->subsystem_device) { - case MPT3SAS_DELL_12G_HBA_SSDID: - pr_info(MPT3SAS_FMT "%s\n", ioc->name, - MPT3SAS_DELL_12G_HBA_BRANDING); + case PCI_VENDOR_ID_DELL: + switch (ioc->pdev->device) { + case MPI2_MFGPAGE_DEVID_SAS2008: + switch (ioc->pdev->subsystem_device) { + case MPT2SAS_DELL_6GBPS_SAS_HBA_SSDID: + pr_info(MPT3SAS_FMT "%s\n", ioc->name, + MPT2SAS_DELL_6GBPS_SAS_HBA_BRANDING); + break; + case MPT2SAS_DELL_PERC_H200_ADAPTER_SSDID: + pr_info(MPT3SAS_FMT "%s\n", ioc->name, + MPT2SAS_DELL_PERC_H200_ADAPTER_BRANDING); + break; + case MPT2SAS_DELL_PERC_H200_INTEGRATED_SSDID: + pr_info(MPT3SAS_FMT "%s\n", ioc->name, + MPT2SAS_DELL_PERC_H200_INTEGRATED_BRANDING); + break; + case MPT2SAS_DELL_PERC_H200_MODULAR_SSDID: + pr_info(MPT3SAS_FMT "%s\n", ioc->name, + MPT2SAS_DELL_PERC_H200_MODULAR_BRANDING); + break; + case MPT2SAS_DELL_PERC_H200_EMBEDDED_SSDID: + pr_info(MPT3SAS_FMT "%s\n", ioc->name, + MPT2SAS_DELL_PERC_H200_EMBEDDED_BRANDING); + break; + case MPT2SAS_DELL_PERC_H200_SSDID: + pr_info(MPT3SAS_FMT "%s\n", ioc->name, + MPT2SAS_DELL_PERC_H200_BRANDING); + break; + case MPT2SAS_DELL_6GBPS_SAS_SSDID: + pr_info(MPT3SAS_FMT "%s\n", ioc->name, + MPT2SAS_DELL_6GBPS_SAS_BRANDING); + break; + default: + pr_info(MPT3SAS_FMT + "Dell 6Gbps HBA: Subsystem ID: 0x%X\n", + ioc->name, ioc->pdev->subsystem_device); + break; + } + break; + case MPI25_MFGPAGE_DEVID_SAS3008: + switch (ioc->pdev->subsystem_device) { + case MPT3SAS_DELL_12G_HBA_SSDID: + pr_info(MPT3SAS_FMT "%s\n", ioc->name, + MPT3SAS_DELL_12G_HBA_BRANDING); + break; + default: + pr_info(MPT3SAS_FMT + "Dell 12Gbps HBA: Subsystem ID: 0x%X\n", + ioc->name, ioc->pdev->subsystem_device); + break; + } break; default: pr_info(MPT3SAS_FMT - "Dell 12Gbps HBA: Subsystem ID: 0x%X\n", ioc->name, + "Dell HBA: Subsystem ID: 0x%X\n", ioc->name, ioc->pdev->subsystem_device); break; } break; - default: - pr_info(MPT3SAS_FMT - "Dell 12Gbps HBA: Subsystem ID: 0x%X\n", ioc->name, - ioc->pdev->subsystem_device); - break; - } -} - -/** - * _base_display_cisco_branding - Display branding string - * @ioc: per adapter object - * - * Return nothing. - */ -static void -_base_display_cisco_branding(struct MPT3SAS_ADAPTER *ioc) -{ - if (ioc->pdev->subsystem_vendor != PCI_VENDOR_ID_CISCO) - return; - - switch (ioc->pdev->device) { - case MPI25_MFGPAGE_DEVID_SAS3008: - switch (ioc->pdev->subsystem_device) { - case MPT3SAS_CISCO_12G_8E_HBA_SSDID: - pr_info(MPT3SAS_FMT "%s\n", ioc->name, - MPT3SAS_CISCO_12G_8E_HBA_BRANDING); - break; - case MPT3SAS_CISCO_12G_8I_HBA_SSDID: - pr_info(MPT3SAS_FMT "%s\n", ioc->name, - MPT3SAS_CISCO_12G_8I_HBA_BRANDING); + case PCI_VENDOR_ID_CISCO: + switch (ioc->pdev->device) { + case MPI25_MFGPAGE_DEVID_SAS3008: + switch (ioc->pdev->subsystem_device) { + case MPT3SAS_CISCO_12G_8E_HBA_SSDID: + pr_info(MPT3SAS_FMT "%s\n", ioc->name, + MPT3SAS_CISCO_12G_8E_HBA_BRANDING); + break; + case MPT3SAS_CISCO_12G_8I_HBA_SSDID: + pr_info(MPT3SAS_FMT "%s\n", ioc->name, + MPT3SAS_CISCO_12G_8I_HBA_BRANDING); + break; + case MPT3SAS_CISCO_12G_AVILA_HBA_SSDID: + pr_info(MPT3SAS_FMT "%s\n", ioc->name, + MPT3SAS_CISCO_12G_AVILA_HBA_BRANDING); + break; + default: + pr_info(MPT3SAS_FMT + "Cisco 12Gbps SAS HBA: Subsystem ID: 0x%X\n", + ioc->name, ioc->pdev->subsystem_device); + break; + } break; - case MPT3SAS_CISCO_12G_AVILA_HBA_SSDID: - pr_info(MPT3SAS_FMT "%s\n", ioc->name, + case MPI25_MFGPAGE_DEVID_SAS3108_1: + switch (ioc->pdev->subsystem_device) { + case MPT3SAS_CISCO_12G_AVILA_HBA_SSDID: + pr_info(MPT3SAS_FMT "%s\n", ioc->name, MPT3SAS_CISCO_12G_AVILA_HBA_BRANDING); + break; + case MPT3SAS_CISCO_12G_COLUSA_MEZZANINE_HBA_SSDID: + pr_info(MPT3SAS_FMT "%s\n", ioc->name, + MPT3SAS_CISCO_12G_COLUSA_MEZZANINE_HBA_BRANDING + ); + break; + default: + pr_info(MPT3SAS_FMT + "Cisco 12Gbps SAS HBA: Subsystem ID: 0x%X\n", + ioc->name, ioc->pdev->subsystem_device); + break; + } break; default: pr_info(MPT3SAS_FMT - "Cisco 12Gbps SAS HBA: Subsystem ID: 0x%X\n", - ioc->name, ioc->pdev->subsystem_device); + "Cisco SAS HBA: Subsystem ID: 0x%X\n", + ioc->name, ioc->pdev->subsystem_device); break; } break; - case MPI25_MFGPAGE_DEVID_SAS3108_1: - switch (ioc->pdev->subsystem_device) { - case MPT3SAS_CISCO_12G_AVILA_HBA_SSDID: - pr_info(MPT3SAS_FMT "%s\n", ioc->name, - MPT3SAS_CISCO_12G_AVILA_HBA_BRANDING); - break; - case MPT3SAS_CISCO_12G_COLUSA_MEZZANINE_HBA_SSDID: - pr_info(MPT3SAS_FMT "%s\n", ioc->name, - MPT3SAS_CISCO_12G_COLUSA_MEZZANINE_HBA_BRANDING); - break; + case MPT2SAS_HP_3PAR_SSVID: + switch (ioc->pdev->device) { + case MPI2_MFGPAGE_DEVID_SAS2004: + switch (ioc->pdev->subsystem_device) { + case MPT2SAS_HP_DAUGHTER_2_4_INTERNAL_SSDID: + pr_info(MPT3SAS_FMT "%s\n", ioc->name, + MPT2SAS_HP_DAUGHTER_2_4_INTERNAL_BRANDING); + break; + default: + pr_info(MPT3SAS_FMT + "HP 6Gbps SAS HBA: Subsystem ID: 0x%X\n", + ioc->name, ioc->pdev->subsystem_device); + break; + } + case MPI2_MFGPAGE_DEVID_SAS2308_2: + switch (ioc->pdev->subsystem_device) { + case MPT2SAS_HP_2_4_INTERNAL_SSDID: + pr_info(MPT3SAS_FMT "%s\n", ioc->name, + MPT2SAS_HP_2_4_INTERNAL_BRANDING); + break; + case MPT2SAS_HP_2_4_EXTERNAL_SSDID: + pr_info(MPT3SAS_FMT "%s\n", ioc->name, + MPT2SAS_HP_2_4_EXTERNAL_BRANDING); + break; + case MPT2SAS_HP_1_4_INTERNAL_1_4_EXTERNAL_SSDID: + pr_info(MPT3SAS_FMT "%s\n", ioc->name, + MPT2SAS_HP_1_4_INTERNAL_1_4_EXTERNAL_BRANDING); + break; + case MPT2SAS_HP_EMBEDDED_2_4_INTERNAL_SSDID: + pr_info(MPT3SAS_FMT "%s\n", ioc->name, + MPT2SAS_HP_EMBEDDED_2_4_INTERNAL_BRANDING); + break; + default: + pr_info(MPT3SAS_FMT + "HP 6Gbps SAS HBA: Subsystem ID: 0x%X\n", + ioc->name, ioc->pdev->subsystem_device); + break; + } default: pr_info(MPT3SAS_FMT - "Cisco 12Gbps SAS HBA: Subsystem ID: 0x%X\n", - ioc->name, ioc->pdev->subsystem_device); + "HP SAS HBA: Subsystem ID: 0x%X\n", + ioc->name, ioc->pdev->subsystem_device); break; } - break; default: - pr_info(MPT3SAS_FMT - "Cisco 12Gbps SAS HBA: Subsystem ID: 0x%X\n", - ioc->name, ioc->pdev->subsystem_device); break; } } @@ -2488,9 +2800,7 @@ _base_display_ioc_capabilities(struct MPT3SAS_ADAPTER *ioc) (bios_version & 0x0000FF00) >> 8, bios_version & 0x000000FF); - _base_display_intel_branding(ioc); - _base_display_dell_branding(ioc); - _base_display_cisco_branding(ioc); + _base_display_OEMs_branding(ioc); pr_info(MPT3SAS_FMT "Protocol=(", ioc->name); @@ -2508,10 +2818,12 @@ _base_display_ioc_capabilities(struct MPT3SAS_ADAPTER *ioc) pr_info("), "); pr_info("Capabilities=("); - if (ioc->facts.IOCCapabilities & + if (!ioc->hide_ir_msg) { + if (ioc->facts.IOCCapabilities & MPI2_IOCFACTS_CAPABILITY_INTEGRATED_RAID) { pr_info("Raid"); i++; + } } if (ioc->facts.IOCCapabilities & MPI2_IOCFACTS_CAPABILITY_TLR) { @@ -2852,18 +3164,22 @@ _base_allocate_memory_pools(struct MPT3SAS_ADAPTER *ioc, int sleep_flag) /* command line tunables for max sgl entries */ if (max_sgl_entries != -1) sg_tablesize = max_sgl_entries; - else - sg_tablesize = MPT3SAS_SG_DEPTH; + else { + if (ioc->hba_mpi_version_belonged == MPI2_VERSION) + sg_tablesize = MPT2SAS_SG_DEPTH; + else + sg_tablesize = MPT3SAS_SG_DEPTH; + } - if (sg_tablesize < MPT3SAS_MIN_PHYS_SEGMENTS) - sg_tablesize = MPT3SAS_MIN_PHYS_SEGMENTS; - else if (sg_tablesize > MPT3SAS_MAX_PHYS_SEGMENTS) { + if (sg_tablesize < MPT_MIN_PHYS_SEGMENTS) + sg_tablesize = MPT_MIN_PHYS_SEGMENTS; + else if (sg_tablesize > MPT_MAX_PHYS_SEGMENTS) { sg_tablesize = min_t(unsigned short, sg_tablesize, SCSI_MAX_SG_CHAIN_SEGMENTS); pr_warn(MPT3SAS_FMT "sg_tablesize(%u) is bigger than kernel" " defined SCSI_MAX_SG_SEGMENTS(%u)\n", ioc->name, - sg_tablesize, MPT3SAS_MAX_PHYS_SEGMENTS); + sg_tablesize, MPT_MAX_PHYS_SEGMENTS); } ioc->shost->sg_tablesize = sg_tablesize; @@ -4021,7 +4337,7 @@ _base_send_ioc_init(struct MPT3SAS_ADAPTER *ioc, int sleep_flag) mpi_request.WhoInit = MPI2_WHOINIT_HOST_DRIVER; mpi_request.VF_ID = 0; /* TODO */ mpi_request.VP_ID = 0; - mpi_request.MsgVersion = cpu_to_le16(MPI25_VERSION); + mpi_request.MsgVersion = cpu_to_le16(ioc->hba_mpi_version_belonged); mpi_request.HeaderVersion = cpu_to_le16(MPI2_HEADER_VERSION); if (_base_is_controller_msix_enabled(ioc)) @@ -4655,6 +4971,7 @@ _base_make_ioc_operational(struct MPT3SAS_ADAPTER *ioc, int sleep_flag) u32 reply_address; u16 smid; struct _tr_list *delayed_tr, *delayed_tr_next; + u8 hide_flag; struct adapter_reply_queue *reply_q; long reply_post_free; u32 reply_post_free_sz, index = 0; @@ -4685,6 +5002,7 @@ _base_make_ioc_operational(struct MPT3SAS_ADAPTER *ioc, int sleep_flag) ioc->scsi_lookup[i].cb_idx = 0xFF; ioc->scsi_lookup[i].smid = smid; ioc->scsi_lookup[i].scmd = NULL; + ioc->scsi_lookup[i].direct_io = 0; list_add_tail(&ioc->scsi_lookup[i].tracker_list, &ioc->free_list); } @@ -4787,6 +5105,16 @@ _base_make_ioc_operational(struct MPT3SAS_ADAPTER *ioc, int sleep_flag) if (ioc->is_driver_loading) { + + if (ioc->is_warpdrive && ioc->manu_pg10.OEMIdentifier + == 0x80) { + hide_flag = (u8) ( + le32_to_cpu(ioc->manu_pg10.OEMSpecificFlags0) & + MFG_PAGE10_HIDE_SSDS_MASK); + if (hide_flag != MFG_PAGE10_HIDE_SSDS_MASK) + ioc->mfg_pg10_hide_flag = hide_flag; + } + ioc->wait_for_discovery_to_complete = _base_determine_wait_on_discovery(ioc); @@ -4812,6 +5140,8 @@ mpt3sas_base_free_resources(struct MPT3SAS_ADAPTER *ioc) dexitprintk(ioc, pr_info(MPT3SAS_FMT "%s\n", ioc->name, __func__)); + /* synchronizing freeing resource with pci_access_mutex lock */ + mutex_lock(&ioc->pci_access_mutex); if (ioc->chip_phys && ioc->chip) { _base_mask_interrupts(ioc); ioc->shost_recovery = 1; @@ -4820,6 +5150,7 @@ mpt3sas_base_free_resources(struct MPT3SAS_ADAPTER *ioc) } mpt3sas_base_unmap_resources(ioc); + mutex_unlock(&ioc->pci_access_mutex); return; } @@ -4834,7 +5165,6 @@ mpt3sas_base_attach(struct MPT3SAS_ADAPTER *ioc) { int r, i; int cpu_id, last_cpu_id = 0; - u8 revision; dinitprintk(ioc, pr_info(MPT3SAS_FMT "%s\n", ioc->name, __func__)); @@ -4854,19 +5184,16 @@ mpt3sas_base_attach(struct MPT3SAS_ADAPTER *ioc) goto out_free_resources; } - /* Check whether the controller revision is C0 or above. - * only C0 and above revision controllers support 96 MSI-X vectors. - */ - revision = ioc->pdev->revision; - - if ((ioc->pdev->device == MPI25_MFGPAGE_DEVID_SAS3004 || - ioc->pdev->device == MPI25_MFGPAGE_DEVID_SAS3008 || - ioc->pdev->device == MPI25_MFGPAGE_DEVID_SAS3108_1 || - ioc->pdev->device == MPI25_MFGPAGE_DEVID_SAS3108_2 || - ioc->pdev->device == MPI25_MFGPAGE_DEVID_SAS3108_5 || - ioc->pdev->device == MPI25_MFGPAGE_DEVID_SAS3108_6) && - (revision >= 0x02)) - ioc->msix96_vector = 1; + if (ioc->is_warpdrive) { + ioc->reply_post_host_index = kcalloc(ioc->cpu_msix_table_sz, + sizeof(resource_size_t *), GFP_KERNEL); + if (!ioc->reply_post_host_index) { + dfailprintk(ioc, pr_info(MPT3SAS_FMT "allocation " + "for cpu_msix_table failed!!!\n", ioc->name)); + r = -ENOMEM; + goto out_free_resources; + } + } ioc->rdpq_array_enable_assigned = 0; ioc->dma_mask = 0; @@ -4874,23 +5201,41 @@ mpt3sas_base_attach(struct MPT3SAS_ADAPTER *ioc) if (r) goto out_free_resources; + if (ioc->is_warpdrive) { + ioc->reply_post_host_index[0] = (resource_size_t __iomem *) + &ioc->chip->ReplyPostHostIndex; + + for (i = 1; i < ioc->cpu_msix_table_sz; i++) + ioc->reply_post_host_index[i] = + (resource_size_t __iomem *) + ((u8 __iomem *)&ioc->chip->Doorbell + (0x4000 + ((i - 1) + * 4))); + } pci_set_drvdata(ioc->pdev, ioc->shost); r = _base_get_ioc_facts(ioc, CAN_SLEEP); if (r) goto out_free_resources; - /* - * In SAS3.0, - * SCSI_IO, SMP_PASSTHRU, SATA_PASSTHRU, Target Assist, and - * Target Status - all require the IEEE formated scatter gather - * elements. - */ - - ioc->build_sg_scmd = &_base_build_sg_scmd_ieee; - ioc->build_sg = &_base_build_sg_ieee; - ioc->build_zero_len_sge = &_base_build_zero_len_sge_ieee; - ioc->sge_size_ieee = sizeof(Mpi2IeeeSgeSimple64_t); + switch (ioc->hba_mpi_version_belonged) { + case MPI2_VERSION: + ioc->build_sg_scmd = &_base_build_sg_scmd; + ioc->build_sg = &_base_build_sg; + ioc->build_zero_len_sge = &_base_build_zero_len_sge; + break; + case MPI25_VERSION: + /* + * In SAS3.0, + * SCSI_IO, SMP_PASSTHRU, SATA_PASSTHRU, Target Assist, and + * Target Status - all require the IEEE formated scatter gather + * elements. + */ + ioc->build_sg_scmd = &_base_build_sg_scmd_ieee; + ioc->build_sg = &_base_build_sg_ieee; + ioc->build_zero_len_sge = &_base_build_zero_len_sge_ieee; + ioc->sge_size_ieee = sizeof(Mpi2IeeeSgeSimple64_t); + break; + } /* * These function pointers for other requests that don't @@ -5006,6 +5351,7 @@ mpt3sas_base_attach(struct MPT3SAS_ADAPTER *ioc) if (r) goto out_free_resources; + ioc->non_operational_loop = 0; return 0; out_free_resources: @@ -5016,6 +5362,8 @@ mpt3sas_base_attach(struct MPT3SAS_ADAPTER *ioc) _base_release_memory_pools(ioc); pci_set_drvdata(ioc->pdev, NULL); kfree(ioc->cpu_msix_table); + if (ioc->is_warpdrive) + kfree(ioc->reply_post_host_index); kfree(ioc->pd_handles); kfree(ioc->blocking_handles); kfree(ioc->tm_cmds.reply); @@ -5055,6 +5403,8 @@ mpt3sas_base_detach(struct MPT3SAS_ADAPTER *ioc) _base_release_memory_pools(ioc); pci_set_drvdata(ioc->pdev, NULL); kfree(ioc->cpu_msix_table); + if (ioc->is_warpdrive) + kfree(ioc->reply_post_host_index); kfree(ioc->pd_handles); kfree(ioc->blocking_handles); kfree(ioc->pfacts); |